Scribd Logo
Upload

Welcome to Scribd!

  • 137 views

    Commissioning Guide

    Uploaded by

    Oreol
    V UD-Series Screw Compressors from MYCOM have a broad range of models from 125mm to 400mm. They have a low porosity cast iron housing that is hydraulically tested. The compressors use a MYCOM "O" rotor profile that reduces blow-by and improves oil film sealing. They also have a variable volume ratio from 2.6 to 5.8 for low power consumption. Capacity can be controlled from 10% to full load using a hydraulically operated slide valve.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Commissioning Guide

    Uploaded by

    Oreol
    137 views2 pages
    V UD-Series Screw Compressors from MYCOM have a broad range of models from 125mm to 400mm. They have a low porosity cast iron housing that is hydraulically tested. The compressors use a MYCOM "O" rotor profile that reduces blow-by and improves oil film sealing. They also have a variable volume ratio from 2.6 to 5.8 for low power consumption. Capacity can be controlled from 10% to full load using a hydraulically operated slide valve.

    Original Description:

    lap

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    V UD-Series Screw Compressors from MYCOM have a broad range of models from 125mm to 400mm. They have a low porosity cast iron housing that is hydraulically tested. The compressors use a MYCOM "O" rotor profile that reduces blow-by and improves oil film sealing. They also have a variable volume ratio from 2.6 to 5.8 for low power consumption. Capacity can be controlled from 10% to full load using a hydraulically operated slide valve.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    137 views2 pages

    Commissioning Guide

    Uploaded by

    Oreol
    V UD-Series Screw Compressors from MYCOM have a broad range of models from 125mm to 400mm. They have a low porosity cast iron housing that is hydraulically tested. The compressors use a MYCOM "O" rotor profile that reduces blow-by and improves oil film sealing. They also have a variable volume ratio from 2.6 to 5.8 for low power consumption. Capacity can be controlled from 10% to full load using a hydraulically operated slide valve.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Screw

    Compressor
    V UD-Series Screw Compressors
    V UD MYCOM’s proven design, the established industry standard

    ROTOR PROFILE
    MYCOM “O” profile reduces the rotor interlobe
    RANGE gas blow-by and improves sealing oil film on rotor
    surface by use of a circular arc profile rather than
    Broad range of models from 125mm (276 CFM) to the conventional sealing edge.
    400mm (8,120 CFM)

    VARIABLE Vi *on V-series


    HOUSING The internal volume ration (Vi) may be manually
    Low porosity Cast Iron, ANSI / ASHRAE STD.15, adjusted from 2.6 to 5.8 (2.2 to 5.0 as an option) to
    hydraulically tested at 470 Psig after assembly. provide the lowest power consumption for any given
    application.
    BEARING
    Radial bearings are steel-backed babbitted-sleeve CAPACITY CONTROL
    type. Thrust bearings are angular contact ball A hydraulically-operated slide
    bearings with oversized balance piston. valve regulates the compressor
    capacity from 10% to full
    load with improved part load
    performance.

    DIMENSIONS & SPECIFICATIONS


    Dimensions are for reference only. Please contact MYCOM for more detailed drawings.
    mm [inch]
    MODEL L W H
    160VS 1027 [40.43]
    160VM 1072 [42.40] 470 [18.50] 410 [16.14]
    160VL 1117 [43.98]
    200VS 1199 [47.20]
    200VM 1256 [49.45] 570 [22.44] 510 [20.08]
    200VL 1311 [51.61]
    250VS 1395 [54.92]
    250VM 1467 [57.76]
    715 [28.15] 640 [25.20]
    250VL 1535 [60.43]
    250VLL 1613 [63.48]
    320VSD 1796 [70.71]
    320VMD 1884 [74.71] 890 [35.04] 780 [30.71]
    320VLD 1971 [77.60]

    160V 200V 250V 320V 125UD 320UD 400UD


    S/M/L S/M/L S/M/L/LL S/M/L S/L LL S/M/L/LL/XL/XXL
    Refrigerant NH3/HFC/Propane

    11,706/13,580/15,454/
    Weight of Compressor lb 816/838/860 1,380/1,477/1,544 2,602/2,690/2,867/3065 4,939/5,468/5,821 485/507 6,856
    17,218/19,577/22,090

    Min. Rotation rpm 1,450 1,450 1,450 1,450 Ask Mayekawa

    Max Rotation rpm 4,500 3,600 3,600 4,500 3,600 Ask Mayekawa

    4,590/5,570/6,890/
    Displacement @ 3,550rpm CFM 294/367/441 574/718/859 1,120/1,400/1,670/1,980 2,250/2,800/3,350 130/210 3,970
    8,120/9,300/10,322

    Capacity Control 10 to 100%

    Design Pressure MPa/PSI 2.16/313

    Refrigerant Oil Ask Mayekawa Branch

    * The information contained herein is for reference only.Subject to change without notice.

    Part No. MKT00004 Rev. 0

    You might also like