Scribd
Upload
36 views1 page

Force (N) Deflection (MM) Solution Time (S) Note Run 1 Run 2 Run 3 Run 4 Run 5 Run 6 Total Run Time

This table shows the results of 6 runs of a material test where force was applied and deflection and solution time were measured, with the first 2 runs yielding modulus of elasticity values of approximately 210 and 200 GPa and subsequent runs using increasing forces of 10, 100, 1000, and 10000 Newtons with a total run time of 0 seconds.

Uploaded by

Nikyle
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
36 views1 page

Force (N) Deflection (MM) Solution Time (S) Note Run 1 Run 2 Run 3 Run 4 Run 5 Run 6 Total Run Time

This table shows the results of 6 runs of a material test where force was applied and deflection and solution time were measured, with the first 2 runs yielding modulus of elasticity values of approximately 210 and 200 GPa and subsequent runs using increasing forces of 10, 100, 1000, and 10000 Newtons with a total run time of 0 seconds.

Uploaded by

Nikyle
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Force (N) Deflection (mm) Solution Time (s) Note

Run 1 1 210 GPa


Run 2 1 200 GPa
Run 3 10
Run 4 100
Run 5 1000
Run 6 10000
Total Run time 0

You might also like