Scribd
Upload
253 views

API 582 Reading Checklist

This document outlines welding guidelines for the chemical, oil, and gas industries. It covers topics such as acceptable welding processes, welding consumables, preheating and interpass temperature requirements, post-weld heat treatment, and special procedure qualification requirements including tube-to-tubesheet welding. The document provides requirements and recommendations for ensuring safe and effective welding of materials used in the chemical, oil, and gas industries.

Uploaded by

bacabacabaca
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
253 views

API 582 Reading Checklist

This document outlines welding guidelines for the chemical, oil, and gas industries. It covers topics such as acceptable welding processes, welding consumables, preheating and interpass temperature requirements, post-weld heat treatment, and special procedure qualification requirements including tube-to-tubesheet welding. The document provides requirements and recommendations for ensuring safe and effective welding of materials used in the chemical, oil, and gas industries.

Uploaded by

bacabacabaca
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

API 582

WELDING GUIDELINES FOR THE CHEMICAL, OIL, AND GAS INDUSTRIES


READING CHECKLISTS

 1 Scope  11 Special Procedure Qualification


Requirements/Testing
 2 Normative References  11.1 General
 11.2 Tube-to-tubesheet Welding
 3 Definitions
 12 Other Items
 4 General Welding Requirements  12.1 Backing Materials
 12.2 Peening
 5 Welding Processes  12.3 Weld Overlay and Clad Restoration
 5.1 Acceptable Welding Processes (Back Cladding)
 5.2 Limitations of Fusion Welding Processes  12.4 Temporary Attachments
 5.3 Single-sided Welded Joints  12.5 Stud Welding
 5.4 Combining Welding Processes  12.6 Hardness Testing-Weld Procedure
 5.5 Mechanized and Automated Welding Qualification and Production Testing
Processes  12.7 Single-pass Welds

 6 Welding Consumables (Filler Metal and  Annex A Welding Consumables for Shielded
Flux) Metal Arc Welding (SMAW)
 6.1 General
 6.2 Dissimilar Welding  Annex B Weld Overlay and Clad Restoration
 6.3 Low-alloy Steel Welding (P..J to P-5) (Back Cladding)
 6.4 Stainless Steel Welding (P-6, P-7, and P-
8)
 6.5 Duplex Stainless Steel Welding
 6.6 SAW
 6.7 Electroslag Welding (for Corrosion
Resistant Weld Overlay)
 6.8 Consumable Storage and Handling
 6.9 Alloy Consumable Controls

 7 Shielding and Purging Gases

 8 Preheating and Interpass Temperature

 9 Post Weld Heat Treatment (PWHT)

 10 Cleaning and Surface Preparation

1 of 1

You might also like