Quantiacs Python Toolbox

Documentation
Release 2.2
Quantiacs
Aug 14, 2017
 Contents

1 Support Packages 3

2 Trading System Structure 5

2.1 Arguments/Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3 Market Positions & Trading 7

4 Settings 9
4.1 Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.2 Markets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.3 Market Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.4 Loading Market Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.5 Roll Overs (R & RINFO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.6 Why Only Daily Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.7 Sample Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.8 Budget . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.9 Trading Costs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.9.1 Slippage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.10 Extensibility and Custom Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

5 Evaluating Your System 15

5.1 Backtesting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5.2 Trading Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

6 Submitting a System 17

7 Optimization 19

8 Performance 21
8.1 Overfitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

9 Reference 23
9.1 computeFees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
9.2 fillnans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
9.3 fillwith . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
9.4 loadData . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
9.5 plotts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
9.6 runts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

i
 9.7 stats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
9.8 submit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
9.9 updateCheck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

10 Indices and Search 27

11 Contact Us 29

ii
 Quantiacs Python Toolbox Documentation, Release 2.2

Table of contents:

Contents 1
Quantiacs Python Toolbox Documentation, Release 2.2

2 Contents
 CHAPTER 1

Support Packages

Python packages supported are:

• numpy
• Pandas
• scipy
• scikit-learn
• ta-lib
• keras
• tensorflow

3
Quantiacs Python Toolbox Documentation, Release 2.2

4 Chapter 1. Support Packages

 CHAPTER 2

Trading System Structure

In Python, you have to define two functions: mySettings and myTradingSystem. The toolbox relies on these
two functions to run your trading system. mySettings contains the settings structure which store all relevant
information for the trading system. The toolbox allows for flexible data definitions, where you can request OPEN,
HIGH, LOW, CLOSE, or VOL data for your system. A typical function definition is shown below:
def myTradingSystem(DATE, HIGH, CLOSE, VOL, exposure, equity, settings)
Your myTradingSystem function will be called each day of the backtesting period with the most recent data as
arguments. The only requirements of myTradingSystem is to return an array of your trading system’s market
positions for the next day and the settings data struct. Market positions, p, is just an array of numbers [0 1 -1 . . . ]
that represents the trading positions you want to take (e.g., no position, buy position, sell position).

Arguments/Parameters

Data can be requested for your trading system through the arguments of the function definition. The
myTradingSystem function isn’t required to call any arguments, the example above is just a representation of
various values that can be called.
Here is a breakdown of what parameters can be loaded into the trading system:

5
Quantiacs Python Toolbox Documentation, Release 2.2

Parameter Description Dimensions (rows x

columns)
DATE a date integer in the format YYYYMMDD Lookback x 1
OPEN the first price of the session Lookback x # of
Markets
HIGH the highest price of the session Lookback x # of
Markets
LOW the lowest price of the session Lookback x # of
Markets
CLOSE the last price of the session Lookback x # of
Markets
VOL number of stocks/contracts traded per session Lookback x # of
Markets
exposure the realized quantities of your trading system, or all the trading Lookback x # of
positions you take Markets
equity cumulative trading performance in each market, reflects gains and Lookback x # of
losses Markets
OI, R, also available to be called as parameters, described in more detail
RINFO under Market Data section
The data is structured with the most recent information in the last index or row. Where lookback is simply how many
historical data points you want to load in each iteration of your trading system. Given the data is daily, lookback
represents the maximum number of days of market data you want to have loaded. Now the two parameters that aren’t
explicitly related to market data are exposure and equity. These two relate to trading in your simulated broker account.
Whenever you make a trading position, that’s recorded in exposure. And whatever the market result of your trading
position is, is then recorded in equity. Or simply put: equity is what you made with each market over your lookback
period.

6 Chapter 2. Trading System Structure

 CHAPTER 3

Market Positions & Trading

A unique attribute of the Quantiacs toolbox is the use of market exposure rather than trades. Instead of telling the
system to buy and sell a certain number of stocks or futures contracts, you can allocate your available assets and
choose how much market exposure you want in a specific stock/future. This is done by adjusting an array p and
returning/outputing it from your trading system function. In order to figure out how big your market exposure is,
Quantiacs looks at all your positions and allocates your capital proportionally. The position vector is normalized to an
absolute sum of 1, so each p value is evaluated proportionally to every other position value.
p=0 you don’t hold asset i in your portfolio
p >= 0 you are invested long in asset i with weight p
p<0 you are invested short in asset i with weight p
Below is a code example of setting the positions for futures:

settings['markets'] = ['F_GC', 'F_ES']

# your trading algorithm
p = [2.4, -1.2]

Here is an example, let’s say your capital is set to $1,000,000 in settings (see Settings section), and you decide to buy
Gold (F_GC) and sell the S&P 500 (F_ES). Let’s say you set your p vector to 2.4 in the market column representing
Gold and to -1.2 for S&P 500, and take no other positions. Then the system would take your $1 million capital, and
allocate it proportionally to the market exposure you just set above. In other words, 2x the capital would go towards
going long Gold as it would short the S&P 500. Your market exposure in Gold would become 2.4/3.6 * 10^6 =
$666,667 and our negative short position in S&P 500 would become 1.2/3.6 * 10^6 = $333,333. Then whatever your
returns are the next day, your balance and market exposure would adjust accordingly (assuming the positions remained
the same at 2.4 and 1.2). This representation of market exposure isn’t 100% accurate of the real world, where you
would have to buy and sell discrete amounts of contracts, but for large balances it should average out to roughly the
same performance.
All of this is done behind the scenes. You can see the result in equity and can track your chosen market exposure
positions in exposure.

7
Quantiacs Python Toolbox Documentation, Release 2.2

Fig. 3.1: Market allocation.

8 Chapter 3. Market Positions & Trading

 CHAPTER 4

Settings

Settings contain your environment variables and are open to being defined and extended with additional fields being
added to the settings struct.
Below is an example of configuring settings:

def mySettings():
''' Define your trading system settings here '''

settings= {}

settings['markets'] = ['CASH','F_AD', 'F_BO', 'F_BP', 'F_C', 'F_CC', 'F_CD',

'F_CL', 'F_CT', 'F_DX', 'F_EC', 'F_ED', 'F_ES', 'F_FC','F_FV', 'F_GC',
'F_HG', 'F_HO', 'F_JY', 'F_KC', 'F_LB', 'F_LC', 'F_LN', 'F_MD', 'F_MP',
'F_NG', 'F_NQ', 'F_NR', 'F_O', 'F_OJ', 'F_PA', 'F_PL', 'F_RB', 'F_RU',
'F_S','F_SB', 'F_SF', 'F_SI', 'F_SM', 'F_TU', 'F_TY', 'F_US','F_W', 'F_XX',
'F_YM']
settings['beginInSample'] = '20120506'
settings['endInSample'] = '20150506'
settings['lookback']= 504
settings['budget']= 10**6
settings['slippage']= 0.05

return settings

Default Settings

Your algorithm will always be called with the following settings by default unless you define them otherwise.

settings['beginInSample'] = '19900101'
settings['lookback'] = 504
settings['budget'] = 1000000
settings['slippage'] = 0.05

9
Quantiacs Python Toolbox Documentation, Release 2.2

Note that you aren’t required to define any settings field, but for most trading systems lookback will likely need to be
changed from 1 if your trading system needs any historical market data. Leaving lookback at the default value while
attempting to access market prices further back than the previous day will result in an error.

Markets

Currently Quantiacs trades in both Stock and Futures markets. A Future is a contract to deliver a specified amount of
the underlying product at a certain date. You can learn more about quant trading with Futures from the video below.
Trading in both Stocks and Futures allows for a great degree of diversification and helps you to generate a trading
system that is successful in many market environments. You can find the full list of available markets on Quantiacs’
Markets page.
In general, you can find the contract unit of any futures by looking at the Futures Contracts Specifications. And finding
the contract unit allows you to relate a futures contract to their commonly found prices such as on Yahoo Finance.
Another unique aspect of futures contracts that doesn’t apply to stocks, is an expiration date on each contract. The
only real difference in your trading data is that the Quantiacs toolbox automatically implements a roll over (see Roll
Overs (R & RINFO) section below) whenever a futures contract expires, to make the pricing data the latest and most
accurate.

Market Data

Note that Quantiacs market data is not updated in realtime, this means you won’t be able to do live trading using the
toolbox. If a market is not defined for some time period, its values are set to not a number (NaN). If data is missing
within the time series (for example due to a holiday), the missing data is replaced by the last known value with zero
volume.
If you want to backtest across every available market, you can get a text file with a string for all of the markets here.
This makes it easy to copy paste all of the available markets into your settings struct.
Here is an example of what the data looks like for a futures contract:
F_AD Australian Dollar
DATE OPEN HIGH LOW CLOSE VOL OI P R RINFO
19900102 77300 77400 77020 77020 125 2559 0 0 0
19900103 76890 77030 76700 76740 1495 3215 0 0 0
19900104 77080 77610 77000 77490 932 3122 0 0 0
19900105 77050 77280 76980 76980 272 2542 0 0 0
19900108 77280 77300 77090 77200 177 2439 0 0 0
19900109 77289 77370 77210 77290 106 2379 0 0 0
And here is what the data fields look like for a stock:
AAPL (Apple)
DATE OPEN HIGH LOW CLOSE VOL P
20010102 1.067 1.0893 1.0446 1.0625 1.12E+08 0
20010103 1.0357 1.192 1.0313 1.1696 2.02E+08 0
20010104 1.2946 1.3125 1.2054 1.2188 1.84E+08 0
20010105 1.2098 1.2411 1.1473 1.1696 1.02E+08 0
20010108 1.2098 1.2098 1.1384 1.183 92568000 0
20010109 1.2009 1.2589 1.183 1.2277 1.44E+08 0

10 Chapter 4. Settings
 Quantiacs Python Toolbox Documentation, Release 2.2

The P column is for backwards compatibility to support the Quantiacs 1.X Toolbox versions. OI represents open
interest for futures contracts, and R and RINFO both provide information about futures contracts roll overs (see Roll
Overs (R & RINFO) section below).

Loading Market Data

Whenever you run runts, it will automatically download the necessary market data. When backtesting across new
markets, or a new sample size, the toolbox will automatically download the corresponding market data if it hasn’t been
downloaded before.
To manually initiate this process, you can use the command loadData. You can find a full breakdown of loadData
under Reference section. The main arguments loadData needs are a list of markets you want downloaded, and the
time period (sample size). An example use case would be:

quantiacsToolbox.loadData(marketList = allMarkets, dataToLoad = ['DATE','OPEN','CLOSE

˓→'], beginInSample = '20150101')

Roll Overs (R & RINFO)

Futures, as opposed to Stocks, come in single contracts with an expiration (delivery) date. This requires that we treat
futures contracts slightly different than stocks in the backtester. Since there is an expiration to the contract, we have
to sell the contract before the expiry and buy a different contract (of the same underlying) that expires further in the
future (this is called ‘rolling’ a contract). There are extra costs and uncertainties associated with this.
Rolling explains why the plot of the prices of the time series (as shown on the website) is not necessarily what you get
when you buy and hold that commodity. The differences between the price plot and the trading result are higher for
commodities and lower for financial futures, since the cost of carry for a Stock Index Future or a Government Bond is
usually very low.
In the market data files (found in the tickerData folder of the toolbox), R and RINFO columns address roll overs.
The data column R contains the roll announcement - the contract maturity of the new contract (i.e. the contract we’re
rolling into) in the format yyyymm. RINFO is the roll difference in the time series data. At a roll we back-adjust the
data in the lookback window by RINFO to keep the time series data steady. We also adjust the performance by the roll
amount since the price difference between the two contracts at the same time is not a win or a loss that can be traded.
So our raw data are not continuous contracts, but single contracts.
Here is an example of rollover data from F_AD.txt:
DATE OPEN CLOSE R RINFO
20150902 70120.0000 70250.0000 0 0.0000
20150903 70360.0000 70100.0000 0 0.0000
20150904 70080.0000 69230.0000 201512 0.0000
20150908 68820.0000 69930.0000 0 -290.0000
20150909 69840.0000 69840.0000 0 0.0000
20150910 69500.0000 70480.0000 0 0.0000
Roll overs are all done automatically in runts, and because of this on-the-fly rolling method you always get:
1. The true Dollar value of the commodity at that point in time - at least for the last data point, i.e. the last row of
the CLOSE matrix.
2. A steady course with no disruptions/gaps because of rolls.

4.4. Loading Market Data 11

Quantiacs Python Toolbox Documentation, Release 2.2

Why Only Daily Data

Quantiacs only supports daily historical market data for several reasons. The first is that our investors want scalable
strategies that can manage hundreds of millions rather than just hundreds of thousands. As limit orders can only be
filled during those times of the session, in which the market trades below the limit, we’d only have a fraction of the
session to execute these orders. Naturally this leads to a much lower capacity of the trading strategy. Additionally,
if we’d allow limit orders we would have to account for partial fills in the backtest, which could make the backtest
results no longer representative in extreme cases.
Secondly, we are a Commodity Trading Advisor registered with the NFA, and we have to comply with the rules of
our regulators. We have to protect our institutional clients from front-running, arbitrage and other potentially criminal
activities. It’s impossible to protect investors trading third party strategies on 1 minute bars. On end of day data we
can ensure their protection from criminal activities.
We have to separate the strategic part of the trading system (its logic of when to buy what) strictly from the actual order
execution and risk management, that’s handled by us (and might actually involve the use of leverage, limit orders, stop
loss orders etc.).

Sample Size

By default, the system will load market data for all dates available, so the backtest will run across the entire 25+ years
of historical market data. Alternatively, you have the ability to define the specific start and end dates for your backtests
through beginInSample and endInSample respectively. Both fields follow the format of YYYYMMDD.

Budget

Although you can change your budget to any size, it is good to test it at $1 million because that would provide it
with the proper scale to effectively trade futures in the real world. Moreover, good trading strategies will show similar
results whether they’re traded at $1 million or $10 million.
Our backtester, no matter the budget allocated, assumes the ability to purchase non-discrete or fractional amounts of
contracts. In reality this is not possible, however, it allows the trading strategy to be evaluated without significant
deviation caused by budgets. Since futures generally have a very large contract size, there would be a big difference
between real and intended allocations at lower capital sizes.
For example, if you attempted to manage your algorithm with 500k and had the following target allocation:
Market Allocation Cash in market Price of 1 contract
F_ES 0.5 0.5 * 500k = 250k 104k
F_SI 0.2 0.2 * 500k = 250k 79k
F_GC 0.1 0.1 * 500k = 50k 118k
F_TY 0.1 0.1 * 500k = 50k 126k
F_FV 0.1 0.1 * 500k = 50k 119k
Again because of the large contract sizes of futures (and the fact that it is impossible to buy half contracts) a naïve
discrete representation would give you 2 contracts F_ES, 1 contract F_SI, and ignore the rest. Thus the real exposure
would be:

12 Chapter 4. Settings
 Quantiacs Python Toolbox Documentation, Release 2.2

Market Allocation Price of 1 contract

F_ES 2 * 104 / 500 = 0.416 104k
F_SI 1 * 79 / 500 = 0.158 79k
F_GC 0 118k
F_TY 0 126k
F_FV 0 119k
CASH 0.426
Realistically, any institution would put down at least $1 million to trade futures with. So our non-discrete trading
positions turn out to be a better representation of real life trading situations.

Trading Costs

When writing your trading system, all trading costs are based off slippage (see Slippage section below), for example
setting it to 0 will test your system without any trading costs. Trading costs can have a significant effect on the perfor-
mance of a trading algorithm. The two main contributors to trading costs are commissions and slippage. Commissions
are fees charged by the exchange and the broker. You cannot avoid them. In most cases they are quite low compared
to amount of your trade. Slippage is the price at which you expected or placed your order and the price at which your
order was actually filled. Factors like the liquidity and the volatility contribute to the slippage as well as the volume
you want to trade. A good estimate for slippage is the daily range, therefore slippage can be estimated ex post.
In our backtesting toolbox we use a very simple yet conservative approach to estimate slippage and commissions: We
take 5% of the daily range as the trading costs. This computes as (HIGH - LOW) * 0.05. This covers the assumption,
that you’ll have more slippage on days with larger market moves, than on days with smaller. This approximation might
overestimate the real trading costs. In this case, it is better to overestimate than underestimate.

Slippage

Slippage is the difference between the price at which you expected or placed your order and the price at which your
order was actually filled. The following factors contribute to the slippage. The liquidity of the market: Higher liquidity
results in lower slippage. In very liquid markets your positions are filled almost immediately. In an illiquid market,
the order execution could cost significant time, in this time the price might move against you. You will notice that
the impact of slippage on your trading system depends on how frequently you trade and how much return each trade
generates. If you trade often and have trades with smaller returns per trade, slippage will be an issue. If you don’t
change the size of your exposure often, slippage will be almost irrelevant for your results. These factors contribute to
slippage:
• Your trading volume: The more shares you want to buy, the longer the order execution takes. The longer the
order execution takes, the further the fill price might be.
• The bid-ask spread: This is the difference in the price quoted for an immediate buy (ask) and the price quoted
for an immediate sale (bid). To get an order filled, you usually have to cross the spread. This is typically on the
far side for you. If you want to sell 100 shares of Stock X you need to find a buyer for them. If there is one in
the orderbook you will find him at the other side of the spread. Large bid/ask spreads lead to a high slippage.
• The volatility of the market: For the sake of simplicity, let’s define volatility as the average change of price per
unit of time. Thus, if the volatility is high, it’s evident that slippage will be higher in volatile markets since
prices tend to move more while your order is executed.

Extensibility and Custom Fields

The best part of settings is the ability to add custom fields to the settings struct.

4.9. Trading Costs 13

Quantiacs Python Toolbox Documentation, Release 2.2

settings['anotherField'] = some_value

The only way to retain custom data from your trading system across multiple instances is the settings struct. Let’s say
you build a custom indicator, and you want to save the values it generates and make them available to your trading
system. Remember that your trading system is just one big function that is called again for each new day of market
data. In other words, nothing within your trading system (except the market positions) is saved across multiple dates.
Settings are an exception to this rule, and they remain intact during the entire backtest. This allows you to record
custom values and datatypes by adding your own fields to settings.

14 Chapter 4. Settings
 CHAPTER 5

Evaluating Your System

Backtesting

Start testing your system by running python command:

python path/to/trading_system.py
The only requirement is to have the following at the end of your python file to make the trading system file self-
executable.

# Evaluate trading system defined in current file.

if __name__ == '__main__':
import quantiacsToolbox
results = quantiacsToolbox.runts(__file__)

Alternatively, you can always run the trading system straight from Python console:
> import quantiacsToolbox
> returnDict = quantiacsToolbox.runts('/Path/to/your/TradingSystem.py')

Trading Results

runts loads the market data and calls your trading system for each day of the backtest with the most recent market
data. It simulates the equity curve for your output values p. The toolbox will return a dictionary of performance values
and a plot of your system’s performance.
returnDict contains the following fields:

15
Quantiacs Python Toolbox Documentation, Release 2.2

Field Data Description

Type
returnDict[’tsName’] string a string that contains the name of your trading system
returnDict[’fundDate’] list a list of the dates available to your trading system
return- list a list of the,dates traded by your trading system
Dict[’fundTradeDates’]
return- list a list defining the equity of your portfolio
Dict[’fundEquity’]
return- list a list defining the equity earned in each market
Dict[’marketEquity’]
return- list a list containing the equity made from each market in settings[’markets’]
Dict[’marketExposure’]
returnDict[’errorLog’] list a list describing any errors made in evaluation
returnDict[’runtime’] float a float containing the time required to evaluate your system
returnDict[’evalDate’] int an int that describes the last date of evaluation for your system (in
YYYYMMDD format)
returnDict[’stats’] dict a dict containing the performance statistics of your system
returnDict[’settings’] dict a dict containting the settings defined in mySettings
returnDict[’returns’] list a list defining the market returns of your trading system

16 Chapter 5. Evaluating Your System

 CHAPTER 6

Submitting a System

To submit your trading strategy to the Quantiacs marketplace simply click the button ‘Submit Trading System’ at the
bottom of the evaluation GUI.
To submit a system to the Quantiacs server, simply run the submit function with the filepath to your system and the
name you wish to use for your system. Submission can be done by running following commands in Python console:
> import quantiacsToolbox
> quantiacsToolbox.submit('/Path/to/your/TradingSystem.py','mySystemName')
Alternatively, you can upload a tradingsystem via the Upload button on the Website.

17
Quantiacs Python Toolbox Documentation, Release 2.2

18 Chapter 6. Submitting a System

 CHAPTER 7

Optimization

To compute several different parameterizations of the same system we can use the optimize function. To use this
feature, place a comment next to the parameter you wish to scan. Within the comment place the parameter domain
and step-size between two pound signs (similar to the Matlab vector notation).
The optimizer takes each set of optimization parameters and runs a backtest to return the results (Sharpe Ratio, volatil-
ity, etc.) for each parameter value. This is essentially a brute-force method, so keep in mind computation time
significantly increases when testing many variables at once or a large range of parameters. Nonetheless, the optimizer
is useful for automating a test of several parameters when you’re looking for the best fit variable. The overall format
looks like this:

emaPeriod = 30 #[20:5:90]#

In the above example, we see that the variable ‘emaPeriod’ will be tested from 20 to 90 in increments of 5, and will
return the performance results from each run. This also allows you to extract any specific dictionary result that is found
under Trading Results (see Trading Results section).

19
Quantiacs Python Toolbox Documentation, Release 2.2

20 Chapter 7. Optimization
 CHAPTER 8

Performance

What makes your system a good system? Universally defining the quality of a system is impossible, but a good first
approximation is the Sharpe Ratio. The Sharpe Ratio compares the realized performance against the risk (or volatility)
taken to achieve that performance. Every investor would prefer systems with high performance and low risk. This is
why a higher Sharpe Ratio is usually better.
A good way to assess your trading strategy is to separately backtest it against an in-sample and out-of-sample set
of historical data. For example, you can first backtest your strategy against 2/3 of the available historical data (the
in-sample), optimize/test various parameters, then backtest it against the remaining 1/3 (out-of-sample) historical data.
This allows you to get a sense of your trading system’s true performance on the out-of-sample data because it won’t
have any of the optimization bias from your in-sample backtest.

Overfitting

Overfitting is the natural enemy of trading algorithms. With enough parameters, it’s easy to fit a model perfectly to the
past. Mathematically: You can always fit n data points perfectly with a polynomial of degree n-1. In other words, you
can build extremely complicated algos that perfectly retell the past but have no clue what happens next. So, here are a
few rules of thumb on how to avoid overfitting:
• Don’t use too many parameters. You’ll have a hard time to find the best solution in the parameter space. If you
manage to isolate an effect with only a few parameters, it might be more stable.
• Test your hypothesis. Don’t use all the data for the development of your algorithm. Save some for a test once
you’re done. You’ll have a much higher chance of success on live market data, if your system doesn’t fail your
out-of-sample test.
• Avoid putting in knowledge of future market events. This means not stopping your strategy from trading during
the 2008 recession, or using Apple as the stock for a long-only strategy since we already know it’s historically
a great choice for buying and holding.
• Use walk forward analysis. This is a bit more complex but involves testing your strategy over a small period of
time, optimizing it, then testing it on another equal period of time that’s out of sample. The intent is to mimic
real world trading of the strategy.

21
Quantiacs Python Toolbox Documentation, Release 2.2

22 Chapter 8. Performance
 CHAPTER 9

Reference

computeFees

quantiacsToolbox.computeFees(equityCurve, managementFee, performanceFee)

Computes equity curve after fees.
Args:
equityCurve (list, numpy array) : a column vector of daily fund values
managementFee (float) : the management fee charged to the investor (a portion of the AUM charged yearly)
performanceFee (float) : the performance fee charged to the investor (the portion of the difference between a new high
and the most recent high, charged daily)
Returns:
returns an equity curve with the fees subtracted. (does not include the effect of fees on equity lot size)

fillnans

quantiacsToolbox.fillnans(inArr)
Fills in (column-wise) value gaps with the most recent non-nan value. Fills in value gaps with the most recent non-nan
value. Leading nan’s remain in place. The gaps are filled in only after the first non-nan entry.
Args:
inArr (list, numpy array)
Returns:
returns an array of the same size as inArr with the nan-values replaced by the most recent non-nan entry.

23
Quantiacs Python Toolbox Documentation, Release 2.2

fillwith

quantiacsToolbox.fillwith(field, lookup)
Replaces nan entries of field, with values of lookup.
Args:
field (list, numpy array) : array whose nan-values are to be replaced
lookup (list, numpy array) : array to copy values for placement in field
Returns:
returns array with nan-values replaced by entries in lookup.

loadData

quantiacsToolbox.loadData(marketList=None, dataToLoad=None, refresh=False, beginInSam-

ple=None, endInSample=None, dataDir=’tickerData’)
Prepares and returns market data for specified markets. Prepares and returns related to the entries in the dataToLoad
list. When refresh is true, data is updated from the Quantiacs server. If inSample is left as none, all available data dates
will be returned.
Args:
marketList (list): list of market data to be supplied
dataToLoad (list): list of financial data types to load
refresh (bool): boolean value determining whether or not to update the local data from the Quantiacs server.
beginInSample (str): a str in the format of YYYYMMDD defining the begining of the time series endInSample (str):
a str in the format of YYYYMMDD defining the end of the time series
Returns:
dataDict (dict): mapping all data types requested by dataToLoad. The data is returned as a numpy array or list and is
ordered by marketList along columns and date along the row.

plotts

quantiacsToolbox.plotts(tradingSystem, equity, mEquity, exposure, settings, DATE, statistics, re-

turns, marketReturns)
Plots equity curve and calculates trading system statistics
Args:
equity (list): list of equity of evaluated trading system
mEquity (list): list of equity of each market over the trading days
exposure (list): list of positions over the trading days
settings (dict): list of settings
DATE (list): list of dates corresponding to entries in equity

24 Chapter 9. Reference
 Quantiacs Python Toolbox Documentation, Release 2.2

runts

quantiacsToolbox.runts(tradingSystem, plotEquity=True, reloadData=False, state={}, source-

Data=’tickerData’)
Backtests a trading system. Evaluates the trading system function specified in the argument tsName and returns the
struct ret. runts calls the trading system for each period with sufficient market data, and collets the returns of each call
to compose a backtest.
Args:
tsName (str): Specifies the trading system to be backtested
plotEquity (bool, optional): Show the equity curve plot after the evaluation
reloadData (bool,optional): Force reload of market data
state (dict, optional): State information to resume computation of an existing backtest (for live evaluation on Quantiacs
servers). State needs to be of the same form as ret
Returns:
a dict mapping keys to the relevant backesting information: trading system name, system equity, trading dates, market
exposure, market equity, the errorlog, the run time, the system’s statistics, and the evaluation date.
keys and description:
‘tsName’ (str): Name of the trading system, same as tsName
‘fundDate’ (int): All dates of the backtest in the format YYYYMMDD
‘fundEquity’ (float): Equity curve for the fund (collection of all markets) ‘returns’ (float): Marketwise returns of
trading system
‘marketEquity’ (float): Equity curves for each market in the fund
‘marketExposure’ (float): Collection of the returns p of the trading system function. Equivalent to the percent expsoure
of each market in the fund. Normalized between -1 and 1 ‘settings’ (dict): The settings of the trading system as defined
in file tsName
‘errorLog’ (list): list of strings with error messages
‘runtime’ (float): Runtime of the evaluation in seconds
‘stats’ (dict): Performance numbers of the backtest ‘evalDate’ (datetime): Last market data present in the backtest

stats

quantiacsToolbox.stats(equityCurve)
Calculates trading system statistics. Calculates and returns a dict containing the following statistics - sharpe ratio -
sortino ratio - annualized returns - annualized volatility - maximum drawdown
• the dates at which the drawdown begins and ends
• the MAR ratio
• the maximum time below the peak value (the dates at which the max time off peak begin and end)
Args:
equityCurve (list): the equity curve of the evaluated trading system
Returns:

9.6. runts 25
Quantiacs Python Toolbox Documentation, Release 2.2

statistics (dict): a dict mapping keys to corresponding trading system statistics (sharpe ratio, sortino ration, max
drawdown...)

submit

quantiacsToolbox.submit(tradingSystem, tsName)
Submits trading system to Quantiacs server.
Args:
tradingSystem (file, obj, instance): accepts a filepath, a class object, or class instance.
tsName (str): the desired trading system name for display on Quantiacs website.
Returns:
returns True if upload was successful, False otherwise.

updateCheck
quantiacsToolbox.updateCheck()
Checks for new version of toolbox.
Returns:
returns True if the version of the toolbox on PYPI is not the same as the current version returns False if version is the
same

26 Chapter 9. Reference
 CHAPTER 10

Indices and Search

• genindex
• search

27
Quantiacs Python Toolbox Documentation, Release 2.2

28 Chapter 10. Indices and Search

 CHAPTER 11

Contact Us

Questions, comments, concerns or just want to say hello?

Contact us at [email protected]
Visit us at Quantiacs

29
Quantiacs Python Toolbox Documentation, Release 2.2

30 Chapter 11. Contact Us

 Index

Q
quantiacsToolbox.computeFees() (built-in function), 23
quantiacsToolbox.fillnans() (built-in function), 23
quantiacsToolbox.fillwith() (built-in function), 24
quantiacsToolbox.loadData() (built-in function), 24
quantiacsToolbox.plotts() (built-in function), 24
quantiacsToolbox.runts() (built-in function), 25
quantiacsToolbox.stats() (built-in function), 25
quantiacsToolbox.submit() (built-in function), 26
quantiacsToolbox.updateCheck() (built-in function), 26

31