Certified Reference Materials for Optical Emission

Spectrometers

CRM – Master Catalog

(2016)
Ferrous & Non-ferrous Metals

METAL POWER ANALYTICAL (I.) PVT.LTD.

An ISO-9001, ISO/IEC-17025, ISO/IEC-17043 Accredited Company
B-48, Raj Ind. Complex, Military Road- Marol, Andheri (E), Mumbai-400059
Tel. +91-22-6783 0500 / +91-22-6783 0505 Fax: +91-22-2925 1373
E-mail:[email protected]; Visit us at: www.metalpower.net

Page 1 of 20 Updated on 05.10.2016

Contents
Contents ....................................................................................................................................................................................................................... 2
From the MD’s Desk ................................................................................................................................................................................................... 4
Carbon, Low Alloy Steels: Certified Reference Materials (Under Certification) ................................................................................................ 6
Stainless Steels: Certified Reference Materials ..................................................................................................................................................... 7
Stainless Steels: Certified Reference Materials (Under Certification) ................................................................................................................ 8
Special Steels: Certified Reference Materials ........................................................................................................................................................ 9
Special Steels: Certified Reference Materials (Under Certification).................................................................................................................. 10
CI/SGI: Certified Reference Materials .................................................................................................................................................................... 11
CI/SGI: Certified Reference Materials (continued…)........................................................................................................................................... 12
Aluminium Base: Certified Reference Materials ................................................................................................................................................... 13
Aluminium Base: Certified Reference Materials (Under Certification) .............................................................................................................. 14
Copper Base: Certified Reference Materials ........................................................................................................................................................ 14
Copper Base: Certified Reference Materials (Under Certification).................................................................................................................... 15
Nickel Base: Certified Reference Materials........................................................................................................................................................... 16
Nickel Base: Certified Reference Materials (Under Certification) ...................................................................................................................... 16
Zn Base: Certified Reference Materials ................................................................................................................................................................. 17
Zn Base: Certified Reference Materials (Under Certification) ............................................................................................................................ 17
Pb Base: Certified Reference Materials (Under Certification) ............................................................................................................................ 18
Setting- Up Samples ........................................................................................................................................................ 19
Iron Base:......................................................................................................................................................................... 19
Setting- Up Samples ................................................................................................................................................................................................. 20
Copper Base: ................................................................................................................................................................... 20

Page 2 of 20 Updated on 05.10.2016

Introduction

Metal Power was founded in 1987 by a team of Engineers with the aim of providing specialized services to Engineering industries. Today, Metal
Power offers a number of products geared towards Metallurgical and Engineering applications, including Optical Emission Spectrometer, Analytical
Standards (RMs, CRMs and SUSs), Metallurgical Kits, Image Analyzers and Hydrogen Analyzer among others. The Analytical Standards have been
produced under guidelines of ISO and the International Vocabulary of Metrology (VIM)

Reference Material (RM) -

A Reference Materials is sufficiently homogeneous and stable with respect to one or more specified properties, which has been established to be fit
for its intended use in a measurement process

NOTE 1 RM is a generic term.

NOTE 2 Properties can be quantitative or qualitative, e.g. identity of substances or species.
NOTE 3 Uses may include the calibration of a measurement system, assessment of a measurement procedure, assigning values to other materials, and
quality control.
NOTE 4 A single RM cannot be used for both calibration and validation of results in the same measurement procedure.
NOTE 5 International Vocabulary of Metrology – Basic and General Concepts and Associated Terms has an analogous definition (VIM - ISO/IEC Guide
99:2007, 5.13), but restricts the term “measurement” to apply to quantitative values and not to qualitative properties. However, Note 3 of ISO/IEC
Guide 99:2007, 5.13, specifically includes the concept of qualitative attributes, called “nominal properties”. (ISO Guide 30:1992/Amd 1:2008)

Certified Reference Material (CRM) - Reference material characterized by a metrologically valid procedure for one or more specified properties,
accompanied by a certificate that provides the value of the specified property, its associated uncertainty, and a statement of metrological
traceability

NOTE 1 The concept of value includes qualitative attributes such as identity or sequence. Uncertainties for such attributes may be expressed as probabilities.
NOTE 2 2Metrologically valid procedures for the production and certification of reference materials are given in, among others, ISO Guides 34 and 35.
NOTE 3 ISO Guide 31 gives guidance on the contents of certificates.
NOTE 4 VIM has an analogous definition (ISO/IEC Guide 99:2007, 5.14). (ISO Guide 30:1992/Amd 1:2008)

Reference Material Certificate - Document accompanying a certified reference material stating one or more property values and their
uncertainties, and confirming that the necessary procedures have been carried out to ensure their validity and traceability. (ISO Guide 30: 1992)

Reference Material Producer

Technically competent body (organization or company, public or private) that is fully responsible for project planning and management,
assignment of and decision on property values, authorization of property values and issue of the certificate or other statements for the reference
materials it produces. (ISO Guide 34: 2000)

Page 3 of 20 Updated on 05.10.2016

From the MD’s Desk

Metal Power was founded in 1987 by a group of professionals with rich backgrounds in the metals industry with the aim of bringing to
the market high-end technology products in the fields of Analytical Equipment & Systems and Metallurgical Instruments. From its
inception, Metal Power Analytical has been dedicated to serving the needs of metal industries. Our effort has been to make high-
quality and high-technology products that fuel industrial growth and - more importantly - profitability, by enabling better control of
quality and also costs.

Metal Power offers a wide range of Certified Reference Materials (CRM) including CRMs that are typically considered difficult to
make, such as Cast Iron, S.G. Iron and Aluminium Standards. Metal Power assures the highest quality across various grades of
Ferrous and non-Ferrous Alloy Standards in solid form. Metal Samples are manufactured using advanced techniques for achieving
homogeneity.

We follow ILAP (Inter-Laboratory Accreditation Programme), have systems in place as per ISO-17025 for testing and follow ISO
guidelines 30-35 in the manufacturing of CRMs. Each CRM is accompanied by a Test Certificate giving Certified Elemental Values,
Standard Deviations and Uncertainty. ILAP Values are provided too.

Backing our range of standards is our deep and vast expertise in Metallurgical and Analytical applications across Ferrous and non-
Ferrous industries. With over two decades of experience in selling and manufacturing CRMs, Metal Power assures you of the highest
quality products to meet your exact and exacting needs.

Sincerely yours,

P D Pant
Managing Director

Page 4 of 20 Updated on 05.10.2016

Carbon, Low Alloy Steels: Certified Reference Materials
Product CRM ID C Mn S Ti Al V Co As Mo Sb Nb Size in
Equivalent Grades
Code Batch Si P Cr Ni Cu B Bi Sn W N Pb mm
--- (0.004)
G-10080 AISI-1008, ASTM A108, DIN 0.092 0.367 0.006 0.001 0.038 (0.002) 0.002 --- (0.004)
3.00109 Ø 50x22
I-15 1.0204 0.075 0.011 0.069 0.008 0.0092 (0.0004) --- --- (0.014) 0.0098 ---

G-10180 AISI-1018, DIN CK15, IS C14, 0.169 0.664 0.022 0.001 0.035 0.002 0.013 0.002 ---
3.00002 Ø 49x25
L-09 EN 32B 0.174 0.028 0.011 0.003 0.002 0.0004 0.007 0.003 ---
G-10200 AISI-1020, BS 070M20, DIN 0.163 0.513 0.058 0.002 0.062 0.006 0.005 (0.004) 0.016 0.014
3.00016 Ø 40x25
H-11 CK22, IS C20, EN 3A 0.209 0.015 0.174 0.022 0.013 (0.0007) (0.014) --- 0.009 ---

G-43400 EN24, IS 40NiCr4Mo3, DIN 0.434 0.577 0.010 0.004 0.025 0.003 0.008 0.252
3.00009 Ø 38x25
D-10 34CrNiMo6, BS8171M40 0.234 0.012 1.03 1.43 0.131 --- --- (0.011)

G-41400 AISI-4140, En19C, 40Cr4Mo3, 0.378 0.862 0.027 0.003 0.024 0.003 0.004 0.214 0.006 0.002
3.00001 Ø 52x25
K-09 BS 709M40 0.213 0.016 1.15 0.009 0.006 0.0005 0.008 --- (0.007) ---
G-10450 0.442 0.857 0.014 0.002 0.022 0.001 0.001 0.001 0.002
3.00011 DIN CK-45, IS 45C8, EN1045 Ø 38x25
E-10 0.239 0.028 0.012 0.004 0.003 (0.0006) --- (0.001) --- 0.007
S-35300 EN353, IS 15NiCr1Mo12, BS 0.186 0.583 0.022 0.002 0.016 0.010 0.025 (0.012) 0.117 (0.004) 0.002
3.00010 Ø 38x25
D-10 815M17 0.226 0.023 1.13 1.04 0.106 0.001 --- 0.010 (0.01) (0.017) ---
UNI-7846 0.220 1.22 0.028 0.005 0.013 --- 0.008 0.005 0.032 --- 0.002
3.00007 DIN 20MnCr5, IS 20MnCr1 Ø 38x25
D-10 0.308 0.021 1.02 0.232 0.066 0.002 --- --- 0.003 0.012 ---
G-15410A DIN 36Mn7, EN15, 15A, 0.379 1.20 0.006 0.044 0.030 0.007 0.009 0.024 0.006 ---
3.00020 Ø 45x25
D-11 IS37C15, BS150M36 0.301 0.031 0.172 0.011 0.012 0.0027 --- 0.006 --- (0.009)
G-15410B DIN 36Mn7, EN15, 15A, 0.440 0.578 0.010 0.004 0.022 (0.003) 0.010 (0.006) 0.256 --- (0.023)
3.00019 Ø 45x25
D-11 IS37C15, BS150M36 0.236 0.009 1.04 1.44 0.133 (0.001) --- (0.007) --- (0.008) (0.006)
G-52986 SAE 52100, EN31, IS103Cr1, 0.963 0.306 0.005 0.002 0.024 0.005 0.010 0.002 0.004 0.002
3.00017 Ø 40x25
G-11 DIN100Cr6 0.201 0.012 1.44 0.029 0.013 (0.005) (0.01) (0.003) --- (0.01)
TRST-1A 0.357 0.718 0.047 --- 0.003 0.012 0.083
3.00071 TMT-500, 450 Ø 40x25
F-12 0.416 0.052 0.399 0.200 0.422 0.002 ---
G-12130 0.069 1.15 0.344 --- (0.003) 0.006 0.011 --- 0.018 ---
3.00026 EN1A-L Ø38 x 20
A-13 (0.007) 0.049 0.041 0.078 0.118 --- --- 0.023 --- 0.283
G-86200 0.208 0.866 0.025 0.002 0.021 0.004 0.006 0.003 0.231 0.001
3.00056 AISI-8620 Ø 40x25
C-14 0.301 0.015 0.573 0.523 0.026 0.001 --- 0.003 (0.004) ---
G-10180 AISI-1018, DIN CK15, IS C14, 0.165 0.507 0.061 --- 0.057 --- (0.003) 0.015
3.00069 Ø 40x25
D-12 EN 32B 0.213 0.013 0.173 0.021 0.014 (0.0017) --- ---

( ) Indicates a provisional / non-certified value

Page 5 of 20 Updated on 05.10.2016

Carbon, Low Alloy Steels: Certified Reference Materials (Under Certification)
Product CRM ID C Mn S Ti Al V Co As Mo Sb Nb Size in
Equivalent Grades
Code Batch Si P Cr Ni Cu B Bi Sn W N Pb mm
(0.003) (0.0044)
G-10650 (0.633) (0.541) (0.061) (0.0015) (0.006) (0.033) (0.008) (0.002) (0.0225)
3.00125 AISI 1065, EN42 B Ø 50x22
E-16 (0.182) (0.012) (0.107) (0.035) (0.136) (0.002) (0.0208) (0.005) (0.014) (0.0094) (0.008)
(0.059) (0.018)
G-11390 (0.384) (1.183) (0.155) (0.001) (0.0057) (--) (0.008) (0.022) (0.0149)
3.00128 EN8M Ø 40x25
E-16 (0.193) (0.012) (0.102) (0.076) (0.182) (0.0078) (0.016) (0.012) (--) (0.0075) (0.012)
K-21590 P22, ASTM A182 (0.146) (0.441) (0.004) (0.002) (0.033) (0.013) (0.013) (0.006) (0.906) (0.005) (0.016) Ø 40x25
3.00107 H-15 (0.333) (0.015) (2.202) (0.097) (0.088) (0.001) (0.004) (0.007) --- (0.012) (0.001)
K-11597 P11, 13CrMo4-5 (0.133) (0.467) (0.014) (0.008) (0.038) (0.020) (--) (--) (0.496) (--) (--) Ø 40x25
3.00129 F-16 (0.605) (0.016) (1.10) (0.11) (0.059) (--) (0.018) (0.005) (--)
(0.0074) (--)
K-44220 46Si7, 300M, AMS (0.498) (0.854) (0.015) (0.002) (0.003) (0.21) (0.008) (0.015) (0.21) (0.149) (0.027) Ø 40x25
3.00127 F-16 6419 (1.82) (0.007) (0.954) (1.28) (0.012) (--) (0.010) (0.0027) (--)
(0.0167) (0.012)
LSW8 -- (0.124) (1.07) (0.012) (0.004) (0.011) (0.241) (0.068) --- (0.967) (0.020) (0.020)
3.00132 H-16 (0.117) (0.021) (1.36) (1.56) (0.126) (0.008) (0.012) (0.002) (0.714) (0.010) (0.016) Ø 33x14

( ) Indicates a provisional / non-certified value

Page 6 of 20 Updated on 05.10.2016

Stainless Steels: Certified Reference Materials
Product CRM ID C Mn S Ti Al V Co As Mo Sb Nb Size in
Equivalent Grades
Code Batch Si P Cr Ni Cu B Bi Sn W N Zr mm

S-30400 0.065 1.23 0.013 0.002 0.005 0.068 0.144 --- 0.203 --- 0.007
3.00003 AISI 304 Ø 50x20
A-10 0.443 0.032 18.09 8.24 0.294 (0.001) --- 0.008 0.018 0.049 ---

S-30403 0.021 1.88 0.023 0.0021 (0.005) 0.051 0.092 --- 0.280 0.012
3.00004 AISI 304 L Ø 38x25
B-10 0.288 0.044 18.12 8.282 0.329 (0.001) --- 0.015 (0.030) 0.082 ---

S-31603 0.018 1.47 0.015 0.003 0.006 0.085 0.088 --- 2.09 --- 0.012
3.00005 AISI 316 L Ø 36x25
B-10 0.422 0.036 16.44 10.03 0.507 (0.001) --- 0.015 --- 0.043 ---

AISI 316-Ti, ASTM 0.020 1.80 0.019 0.291 0.021 0.076 (0.168) --- 2.08 --- 0.014
3.00110 S-31635 Ø 40x25
A240, DIN 1.4571 0.434 0.037 16.79 10.57 0.407 (0.0013) --- --- (0.032) 0.020 ---

S-32100 0.035 1.92 0.005 0.184 0.017 0.057 0.148 --- 0.365 ---
3.00006 AISI 321 Ø 40x25
B-10 0.488 0.037 17.50 9.27 0.483 --- --- 0.029 0.033 0.029

S-20100 0.101 7.38 0.014 (0.005) (0.005) 0.056 0.087 0.135 --- (0.015)
3.00022 AISI 201 Ø 40x25
K-11 0.345 0.087 17.76 3.66 1.35 (0.001) --- (0.041) (0.18) ---

S-41000A 0.152 0.775 0.004 --- 0.003 0.035 0.016 0.011 Ø 40x20
3.00029 AISI 410
J-12 0.477 0.025 12.02 0.217 0.033 --- --- ---

S-41000B 0.130 0.395 0.033 0.004 0.003 0.010 0.004

3.00030 AISI 410 Ø 40x20
J-12 0.305 0.020 11.72 0.074 0.010 --- ---

S-43100 0.158 0.901 0.017 0.002 (0.004) 0.036 0.046 --- 0.164 0.004
3.00087 AISI 431 Ø 40x25
K-14 0.357 0.035 15.41 1.39 0.122 --- --- 0.005 --- ---

( ) Indicates a provisional / non-certified value

Page 7 of 20 Updated on 05.10.2016

Stainless Steels: Certified Reference Materials (Under Certification)

Product CRM ID C Mn S Ti Al V Co As Mo Sb Nb Size in

Equivalent Grades
Code Batch Si P Cr Ni Cu B Bi Sn W N Zr mm
S-17400 (0.050) (0.703) (0.030) (0.003) (0.005) (0.031) (0.032) (0.281)
3.00058 17-4PH, ASTM A167 Ø 40x25
G-14 (0.393) (0.021) (15.096) (4.079) (3.075) --- --- ---

S-30200 (0.081) (1.09) (0.0094) (0.0004) (0.007) (0.071) (0.172) (0.0064) (0.294) (0.007)
3.00112 SS-302 Ø 40x25
B-16 (0.357) (0.033) (17.97) (8.00) (0.357) (0.001) --- (0.0061) (0.028) ---
(0.057)

S-31000 (0.062) (1.95) (0.0129) (--) (0.023) (0.071) (0.122) (0.005) (0.25) (--) (0.064)
3.00113 SS-310 Ø 40x25
C-16 (0.48) (0.031) (24.6) (15.55) (0.30) (--) (--) (0.012) (0.051) (0.11) (--)

Page 8 of 20 Updated on 05.10.2016

Special Steels: Certified Reference Materials
Product CRM ID C Mn S Ti Al V Co As Mo Sb Nb Size in
Equivalent Grades
Code Batch Si P Cr Ni Cu B Bi Sn W N Zr mm

J-95405 ASTM-A297 : HU 0.497 1.75 0.027 (0.01) 0.073 (0.022) 0.071 --- 0.560
3.00012 Ø 45x25
L-09 39Ni-18Cr 2.78 0.022 21.50 36.33 0.048 --- --- (0.021) (0.015)

G-93100 0.179 0.485 0.009 0.003 0.021 0.002 (0.005) (0.005) 0.185 (0.005) 0.002
3.00008 DIN EN36C Ø 38x25
D-10 0.238 0.012 0.987 3.62 0.113 (0.0005) --- 0.005 (0.015) (0.024) ---

T-30402 1.52 0.300 0.004 0.004 0.010 0.659 0.022 --- 0.808 (0.003) (0.008)
3.00018 D2 Ø 40x25
G-11 0.230 0.022 11.41 0.258 0.066 (0.001) --- (0.005) --- (0.041) ---

T-11313 0.876 0.189 0.047 --- 0.030 2.133 0.845 --- 5.49
3.00090 M3 --- --- Ø42 x 25
L-14 0.313 0.036 4.002 0.234 0.110 --- --- 0.019 6.34

S-32750-A 0.020 1.33 0.019 (0.006) (0.070) 0.093 0.121 3.19 --- 0.014
3.00021 F 51 Ø 50x25
H-11 0.433 0.032 22.57 5.12 0.391 0.0007 --- 0.180 0.205 ---

S-32750-B 0.019 1.34 0.020 0.006 (0.057) 0.092 0.119 3.13 --- 0.014
3.00023 F 51 Ø 50x25
H-11 0.428 0.032 22.77 5.04 0.397 (0.0005) --- 0.179 0.200 ---

S-31803 0.031 1.52 0.003 (0.006) 0.057 0.127 0.113 3.16 --- 0.014
3.00024 AISI 2205 Ø 37x25
H-11 0.601 0.021 22.29 6.02 0.289 0.003 --- 0.055 0.172 ---

EN45, DIN 55Si7, IS 0.599 0.823 0.023 (0.004) 0.016 0.006 0.008 --- 0.012
4501
3.00015 55Si2Mn90, BS Ø 40x25
L-10 1.72 0.033 0.084 0.023 0.031 (0.0006) --- 0.015 (0.002)
250A53, AISI 9255

EN45, DIN 55Si7, IS 0.623 0.857 0.038 0.004 0.017 0.009 0.007 --- 0.021 (0.003) (0.011)
4502
3.00014 55Si2Mn90, BS Ø 40x25
L-10 1.71 0.037 0.126 0.057 0.108 0.001 --- (0.024) (0.002) (0.017) ---
250A53, AISI 9255

IS 50Cr4V2, DIN 0.571 0.827 0.009 0.002 0.020 0.196 0.012 --- 0.014 (0.001)
G-51500
3.00013 50CrV4, BS 735A51, Ø 40x25
J-10 0.287 0.016 0.967 0.043 0.022 --- --- 0.002 --- ---
AISI 6150, SUP 10

J 91309 1.26 15.69 0.022 0.004 0.030 0.058 0.011 --- 0.665 0.010
3.00065 Hadfield Steel Ø 35x15
I-13 1.18 0.033 2.17 0.399 0.065 0.003 --- 0.015 (0.024) ---

S-63019 (0.583) (8.31) (0.008) (0.005) --- (0.096) (0.365) (0.302) --- (0.027)
3.00027 21-4N Ø 40x20
E-12 (0.335) (0.031) (20.59) (4.41) (0.112) --- --- --- (0.408) ---

( ) Indicates a provisional / non-certified value

Page 9 of 20 Updated on 05.10.2016

Special Steels: Certified Reference Materials (Under Certification)
Product CRM ID C Mn S Ti Al V Co As Mo Sb Nb Size in
Equivalent Grades
Code Batch Si P Cr Ni Cu B Bi Sn W N Zr mm

T-30403 (2.32) (0.31) (0.007) (0.004) (0.009) (0.077) (0.02) (--) (0.11) (--) (0.008)
3.00114 D3 Ø 40x25
B-16 (0.33) (0.021) (11.91) (0.21) (0.07) (0.001) (--) (0.005) (0.03) (0.095) (--)

FS-Gr1 (1.17) (0.276) (0.012) (0.0029) (0.0064) (0.0019) (0.0079) (0.007) (0.0015) (--) (0.0067)
3.00126 Special Steel Ø 40x25
F-16 (0.161) (0.024) (0.675) (0.021) (0.0118) (--) (0.0187) (--) (--) (0.001) (0.0259)

( ) Indicates a provisional / non-certified value

Page 10 of 20 Updated on 05.10.2016

CI/SGI: Certified Reference Materials
Product CRM ID C Mn S Ti Al V Co As Mo Zn Nb
Equivalent Grades Size in mm
Code Batch Si P Cr Ni Cu B Bi Sn W Pb Mg

CI-GR1 3.16 0.608 0.007 0.010 (0.010) (0.006) (0.015) (0.007) (0.006)
3.00031 FG-150 ~Ø 38x16
B-12 2.51 0.019 0.146 0.011 0.018 --- --- (0.011) 0.027
CI-GR2 2.07 0.381 0.024 0.007 --- 0.022 (0.025) (0.011) (0.001) (0.011)
3.00032 ASTM 532/532M II A ~ Ø36 x 16
G-12 0.875 0.032 11.50 0.094 0.105 --- --- (0.005) --- ---
CI-GR3 2.36 0.350 0.020 0.004 0.011 0.015 0.006 0.004 ---
3.00033 --- ~Ø36 x 16
I-12 2.14 0.092 1.18 0.067 0.065 --- --- --- 0.028
CI Gr-4 2.17 0.285 0.205 0.019 0.018 0.065 0.031 --- 0.559 --- 0.018
3.00061 --- ~Ø38 x 15
I-13 3.48 0.020 0.521 0.057 0.065 0.012 --- 0.026 --- 0.014 (0.013)
CI Gr-5 2.40 0.331 0.138 0.100 (0.012) 0.358 0.042 (0.043) 1.14 0.014
3.00034 --- ~Ø36 x 16
C-13 2.96 0.051 0.084 0.099 0.019 0.021 --- (0.007) 0.004 ---
CI Gr-6 2.00 0.461 0.127 0.015 0.046 0.137 0.022 --- 0.274 0.022
3.00035 --- ~ Ø36 x 16
B-13 2.51 0.101 0.406 0.146 0.211 0.038 --- 0.196 0.005 ---
CI Gr-7 3.06 0.691 0.071 --- --- (0.011) 0.045 0.072 ---
3.00062 --- ~Ø38 x 15
H-13 1.54 0.020 0.333 0.355 0.016 0.021 --- 0.084 0.013
CI Gr-8 3.48 1.33 0.097 0.045 --- 0.049 0.022 ---- 0.225 0.049
3.00063 --- ~Ø38 x 15
H-13 1.94 0.193 0.243 0.293 0.125 0.007 --- 0.184 0.038 0.008
CI Gr-9A 2.77 0.392 0.028 0.025 0.138 0.031 0.019 --- 0.163 0.015
3.00036 --- ~ Ø36 x 16
A-13 0.803 0.022 1.06 1.22 0.221 0.005 --- 0.004 (0.015) 0.012
CI GR9K 2.69 0.690 0.072 --- 0.146 0.026 0.034 0.058
3.00072 --- ~Ø38 x 15
J-13 0.972 0.425 0.990 0.318 2.08 --- --- ---
CI-GR10 3.65 2.08 0.104 0.059 0.289 0.029 0.125 --- 0.052 0.091
3.00133 --- --- ~Ø38 x 15
J-13 1.75 0.120 0.390 0.879 1.44 0.002 --- 0.007 0.018 0.007
CI GR-11 2.94 0.433 0.032 0.108 0.094 0.196 0.052 --- 0.045 0.021
3.00037 --- ~Ø36 x 15
A-14 2.10 0.075 0.254 0.859 0.153 0.021 --- 0.047 (0.016) 0.040
CI-GR11S 3.49 0.309 0.009 0.074 0.107 0.133 0.063 --- 0.059 ---
3.00091 --- ~Ø36 x 15
L-14 1.90 0.016 0.140 0.814 0.228 0.017 --- 0.044 --- 0.047

( ) Indicates a provisional / non-certified value

Page 11 of 20 Updated on 05.10.2016

CI/SGI: Certified Reference Materials (continued…)

Product CRM ID C Mn S Ti Al V Co As Mo Zn Nb Size in

Equivalent Grades
Code Batch Si P Cr Ni Cu B Bi Sn W Pb Mg mm

CI-GR11C 3.00 2.65 0.026 0.025 0.089 0.003 0.002 --- 0.024 0.031 0.198
3.00089 --- ~Ø38 x 15
J-14 1.54 0.016 0.181 0.703 0191 0.016 --- 0.037 --- --- 0.045
CI-Gr13 2.60 3.19 0.011 0.028 0.013 0.013 0.013 0.464 ---
3.00052 --- Ø 38x16
E-13 4.03 0.148 1.14 19.30 0.195 --- --- --- 0.123
CI-GR14 1.91 0.333 0.269 0.029 0.052 0.054 0.015 --- 0.614 --- 0.036
3.00066 --- ~Ø38 x 15
I-13 6.40 0.023 0.494 0.059 0.062 0.014 --- 0.028 (0.018) 0.023 ---
CI-GR250 2.30 0.243 0.027 0.034 0.125 0.104 0.056 --- 0.048 --- ---
3.00088 --- ~Ø38 x 15
K-14 1.63 0.017 1.72 1.39 0.136 0.018 --- 0.042 --- --- 0.046

Ni RM-1 2.76 3.52 0.047 0.028 (0.004) (0.021) 0.012 ---

3.00053 --- --- --- --- ~ 35x35x15
E-13 3.50 0.164 1.24 21.86 0.194 (0.021) --- (0.035)
Ni Cr1 2.64 0.400 0.020 0.015 (0.002) 0.020 0.025
3.00038 --- --- --- --- --- ~ 36x36x15
H-12 1.61 0.020 10.01 7.06 0.231 --- ---

( ) Indicates a provisional / non-certified value

Page 12 of 20 Updated on 05.10.2016

Aluminium Base: Certified Reference Materials
Product CRM ID Si Cr Ni V Fe Zn Sr Co Be Size in
Equivalent Grades
Code Batch Mn Ti Cu Pb Mg Sn Zr Al -- mm

A-96351
6351 0.831 0.010 0.008 0.006 0.193 0.006 Ø 40x25
3.00039
K-10 0.498 0.032 0.025 (0.001) 0.724 0.011
A-96063 0.859 0.006 0.005 0.010 0.136 0.005
3.00040 6063 Ø 40x25
B-11 0.597 0.012 0.023 0.003 0.778 0.010
A96101 0.475 0.002 0.005 0.014 0.145 0.004 ---
3.00044 EC 6101 Ø36x20
B-13 0.011 0.018 0.004 0.011 0.736 0.002 0.002
A91050 1050 0.146 0.003 0.004 0.003 0.347 0.005 --- Ø 40x32
3.00047
C-13 0.002 0.015 0.007 0.011 0.002 0.002 0.003
A-91060 0.139 --- 0.004 0.010 0.098 0.006 --- ---
3.00104 1060 Ø 44x25
B-15 0.002 0.006 0.002 (0.002) 0.003 --- (0.001) (99.74)

A-03560 6.75 (0.007) 0.004 --- 0.340 0.020 0.004

3.00043 AlSi7Mg, AC4C, LM25 Ø 45x20
E-12 0.223 0.028 0.027 0.007 0.142 --- ---

AC-44100 10.77 0.011 0.010 --- 0.62 0.045 (0.001)

3.00042 LM6 Ø 45x25
A-12 0.092 0.023 0.12 0.013 0.02 (0.006) --

A-0383 9.13 0.01 0.123 0.008 0.546 0.11 0.002

3.00045 ADC-12 Ø 45x40
J-12 0.138 0.06 1.814 0.023 0.171 0.003 ---

A03190 6.94 0.014 0.008 0.007 0.552 0.030 0.002

3.00041 LM27 Ø 50x40
E-11 0.422 0.044 2.60 (0.010) 0.196 --- ---

34600 10.10 0.013 0.024 0.011 0.711 0.198 (0.006)

3.00055 AlSi9Cu3 Ø 49x33
I-13 0.215 0.047 2.23 0.024 0.400 --- ---

43100 10.92 0.013 0.009 0.012 0.558 0.058 (0.009)

3.00060 LM9 Ø 48x35
G-13 0.331 0.050 0.148 0.022 0.309 --- ---

A-97075 0.110 0.191 0.011 --- 0.132 5.80

3.00103 7075 Ø 38x30
L-14 0.045 0.029 1.61 (0.018) 2.36 (0.005) 0.040

A-95083 0.173 0.099 0.004 --- 0.209 0.056 --- (0.002)

3.00102 5083 Ø 50x20
L-14 0.635 0.044 0.063 0.018 4.40 --- (0.007) ---

( ) Indicates a provisional / non-certified value

Page 13 of 20 Updated on 05.10.2016

Aluminium Base: Certified Reference Materials (Under Certification)
Product CRM ID Si Cr Ni V Fe Zn Sr Co Be P Size in
Equivalent Grades
Code Batch Mn Ti Cu Pb Mg Sn Zr Al B -- mm

AC-44100B (12.449) (0.011) (0.008) (0.009) (0.455) (0.046) (0.005)

3.00134 LM6 Ø 45x25
I-15 (0.023) (0.024) (0.048) (0.005) (0.005) (0.005) (0.014)

AlZn-1 (0.065) --- (0.005) --- (0.013) (32.56) --- (0.001) --- (0.001)
3.00119 -- Ø50 x 42
E-16 (0.002) (0.004) (0.53) (0.004) (0.015) (0.002) (0.001) 66.68 (0.00024) ---

( ) Indicates a provisional / non-certified value

Copper Base: Certified Reference Materials

Product CRM ID Material Category & C S Al Fe Bi Sn Pb Si P Cd Size in

Code Batch Equivalent Grades Mn Ni Cu Sb As Zn Mg Cr Te -- mm

C-46700A (0.003) (0.004) (0.01) 0.040 (0.001) 1.06 0.21 Ø 40x18

3.00048 CuZn39Sn1
A-12 (0.004) 0.020 62.10 (0.01) (0.01) 36.40 (0.002)
C-83600 0.073 (0.013) 0.211 0.011 5.34 (5.15) 0.004
3.00051 LG2 ~ 36x36x18
D-12 0.490 84.52 --- 0.020 3.34 --- ---
C35000 --- --- 0.012 0.255 0.002 0.197 1.55
3.00067 --- Ø 40x25
G-13 (0.003) 0.149 60.96 0.023 0.005 (36.55) ---
C-11000 --- (0.0009) (0.0037) (0.0076) (0.0323) (0.0008)
3.00059 --- Ø 39x22
D-14 (0.0014) 99.96 (0.0001) (0.0017) --- (0.001)

C-95800 ASTM B148, BS1400- --- --- 9.61 4.65 0.003 0.003 0.006 0.077 0.010
3.00054 Ø40 x 25
H-13 AB2, EN1982-CC333G 1.12 4.55 80.25 --- 0.002 0.116 --- --- ---
C-16200 --- --- --- (0.004) --- (0.001) 0.684
3.00118 Copper- Cadmium Ø40 x 20
E-16 0.001 0.002 (99.25) --- (0.004) --- (--)

Page 14 of 20 Updated on 05.10.2016

Copper Base: Certified Reference Materials (Under Certification)

Product CRM ID Material Category & O S Al Fe Bi Sn Pb Si P Cd Size in

Code Batch Equivalent Grades Mn Ni Cu Sb As Zn Mg Cr Te Ag mm

High Leaded Bronze, --- (0.087) (0.004) (0.032) (0.008) (8.874) (8.615) (0.005)
C-93700
3.00149 ASTM B271/B30, SAE Ø40 x 25
I-13 (0.003) (0.294) (0.482) (0.024) (0.508) --- ---
J461/462
C-90700 High Tin Bronze, --- (0.06) (0.001) (0.033) (0.007) (11.341) (0.972) (0.005)
3.00150 Ø40 x 25
I-13 SAE 65 (0.003) (0.324) (86.536) (0.068) (0.019) (0.418) --- ---

C-14500A --- (0.006) --- (0.001) (0.001) (0.01) (--) ----

3.00116 Copper-Tellurium Ø40 x 25
E-16 (0.010) (0.001) (99.25) (0.002) --- --- (0.679) (0.0006)
C-10100 (0.001) (0.002) (0.002) (0.002) (0.0001) --- (0.0002) (0.007) (0.0001) Ø40 x 20
3.00108 Pure Copper
H-15 --- (0.0001) (99.97) --- (0.001) (0.027) (0.003) --- (0.001)
C-36000 --- --- (0.028) (0.610) (0.003) (0.570) (3.77) (0.007) (0.003)
3.00122 Leaded Brass Ø40 x 22
E-16 (0.010) (0.280) (55.67) --- --- (38.98) --- --- ---

( ) Indicates a provisional / non-certified value

Page 15 of 20 Updated on 05.10.2016

Nickel Base: Certified Reference Materials

Product CRM ID Material Category & C Si Mn P S Cr Ti Ni Size in

Code Batch Equivalent Grades Fe Cu V Nb Mo Co Al Ta mm

N-06625
Inconel 625 0.041 0.208 0.136 0.009 0.001 21.01 0.033 60.80 Ø 42x24
3.00098
C-15 5.25 0.099 0.041 3.21 8.79 0.098 (0.108) (0.013)

Nickel Base: Certified Reference Materials (Under Certification)

Product CRM ID Material Category & C Si Mn P S Cr Ti Ni Size in

Code Batch Equivalent Grades Fe Cu V Nb Mo Co Al Ta mm

3.00099 N-08825 (0.024) (0.23) (0.52) --- --- (18.75) (0.67) (45.72) Ø40 x 25
Nickel-Iron-Cr Alloy
E-16 (26.51) (1.94) (0.088) (--) (5.32) (0.10) (0.088) (--)

3.00097 N-08020 (0.041) (0.305) (0.805) --- --- (19.348) (0.183) (36.850) Ø40 x 25
Alloy 20 Special
C-15 (28.829) (0.903) (0.090) (1.642) (10.896) (0.100) --- ---

( ) Indicates a provisional / non-certified value

Page 16 of 20 Updated on 05.10.2016

Zn Base: Certified Reference Materials

Product CRM ID Material Category & Si Sn Al Pb Zn Cr Sb Size in

Code Batch Equivalent Grades Cu Fe Mg Ti Mn Ni Cd mm

3.00111 Z35531A --- (0.001) 3.94 (0.003) (95.14) Ø50 x 40

Zamak 5
B-16 0.951 (0.003) 0.038 --- --

Zn Base: Certified Reference Materials (Under Certification)

Product CRM ID Material Category & Si Sn Al Pb Zn Cr Sb Size in

Code Batch Equivalent Grades Cu Fe Mg Ti Mn Ni Cd mm

3.00131 Z12002 --- --- --- --- (99.99) (0.001) (0.003) Ø39 x 27
Pure Zinc
F-16 (0.001) (0.003) --- --- --- --- ---

( ) Indicates a provisional / non-certified value

Page 17 of 20 Updated on 05.10.2016

Pb Base: Certified Reference Materials (Under Certification)

Product CRM ID Material Category & Si Sn Al Pb Bi Cd Zn Se Size in

Code Batch Equivalent Grades Cu Fe Mg Ti Ag Sb As Ni mm

Pb-Gr1 --- (1.58) (0.001) 93.89 (0.016) (3.25) Ø40 x 20

3.00115 --
E-16 (0.048) --- --- --- (0.007) (1.04)
L-50001 --- --- (99.99) (0.005) --- (0.0006) Ø50 x 20
3.00130 Pure Lead
F-16 (0.0002) (0.0003) -- (0.0006) (0.0003) (0.0004)
Pb-Sb3 (0.140) (97.27) (0.007) --- (0.0001) (0.011) Ø50 x 20
3.00142 --
I-16 (0.002) (2.68) (0.23) (0.0003)

( ) Indicates a provisional / non-certified value

Page 18 of 20 Updated on 05.10.2016

Setting- Up Samples
Iron Base:

Product SUS ID C Mn S Ti Al B W Co Cu Pb As Sb
Batch SUS Category Size in mm
Code Si P Cr Ni Nb Mo Mg Sn V Zr N Ca

4.00005 GR1D 0.012 0.070 0.005 0.155 0.011 0.001 0.005 0.003 0.014
Low alloy steel Ø 40x25
A-11 0.021 0.036 0.036 0.035 0.013 0.009 0.012 0.008 0.015
4.00014 GR2J 0.538 1.03 0.020 0.009 0.038 --- 0.100 0.087 0.360 ---
Low alloy steel Ø 40x25
H-10 0.835 0.021 0.818 0.853 0.146 0.469 0.013 0.005 0.442 0.002
4.00019 GR4A 0.997 1.417 0.083 0.185 0.446 0.004 0.330 0.701 0.525
Low alloy steel Ø 40x25
D-11 1.543 0.155 2.750 3.217 0.246 0.964 <0.005 0.039 0.533
QA-01 3.12 1.11 0.149 0.062 0.129 0.006 0.058 0.038 0.560 0.008
4.00024 Cast Iron Ø 36x36x16
C-13 2.66 0.315 0.853 0.984 0.009 0.417 --- 0.219 0.420 ---
4.00020 SS1A 0.120 1.06 0.013 0.055 0.021 <0.001 <0.005 0.024 0.052 0.012 0.004 <0.01
Stainless Steel Ø 40x25
L-11 0.480 0.031 26.20 3.71 <0.01 0.046 --- --- 0.036 0.035 0.064 ---
4.00021 SS2A 0.058 1.58 0.018 0.160 0.570 0.002 0.090 0.260 0.950 <0.01 <0.01 0.240
Stainless Steel Ø 40x25
E-12 2.10 0.013 15.95 8.70 0.213 2.13 --- <0.01 0.070 0.012 0.240 0.010
4.00022 SS3 0.044 0.360 0.005 1.09 0.190 <0.001 <0.01 0.094 0.047 0.035 0.003 0.092
Stainless Steel Ø 40x25
L-11 0.880 0.009 6.23 26.84 1.54 5.02 --- <0.001 0.087 0.028 0.011 ---

These (SUS) Standards are to be used for re-standardization / drift corrections, but are not certified with respect to true composition.
Only approximate values are issued with these Standards.

Page 19 of 20 Updated on 05.10.2016

 Setting- Up Samples

Copper Base:

Product SUS ID S Pb Mn Ni Zn As Ag Mg Cr Co B Size in

SUS Category
Code Batch Cu Sn Fe P Si Bi Sb Al C Ti -- mm

SUS-Ci2A --- --- 0.080 0.008 0.066 0.140 0.130

4.00047 39x37x19
F-14 99.36 0.192 0.018 --- --- ---
SUS-Cu3A --- 0.0022 <0.0005 0.0009 0.009 <0.0005 0.00083 0.001 0.0022 0.926
4.00027 Ø 40 x 20
A-15 98.93 0.0009 0.021 <0.0001 0.0098 <0.0005 0.016 <0.0002 ---
SUS-Cu3B --- 0.0026 0.0015 0.0082 0.015 0.0005 0.001 0.0007 0.0001 0.643
4.00059 Ø 40 x 20
A-15 99.13 0.009 0.031 0.0036 0.039 <0.0005 0.011 0.0007 ---
SUS-Cu3C --- 0.006 0.006 0.01 0.031 0.0283 0.002 0.0013 <0.0001 0.510
4.00060 Ø 40 x 20
A-15 99.23 0.019 0.076 0.0065 0.0237 <0.0005 0.0093 0.0005 ---
SUS-Cu4A --- 0.003 0.73 1.88 0.77 35.52 0.0033 0.007 0.0002 0.011 0.004
4.00028 Ø 40 x 20
A-15 58.3 0.11 0.26 0.005 0.600 --- 0.01 1.79 --- ---
SUS-Cu4B --- 0.003 0.57 1.67 0.91 36.17 0.005 0.005 0.0002 0.005 0.006
4.00061 Ø 40 x 20
A-15 57.88 0.072 0.330 0.003 0.510 --- 0.010 1.85 --- ---
SUS-Cu5 --- --- 0.001 0.31 4.93 0.22 0.004 0.001 0.009
4.00029 Ø 45x20
C-15 79.83 0.019 4.75 --- 0.08 --- 9.84 ---
SUS-Cu6A --- 0.14 9.245 0.001 0.395 1.385 0.0365 --- 0.0001
4.00030 Ø 40 x 20
D-15 81.325 7.065 0.0685 0.0025 0.001 --- 0.623 0.001
SUS-Cu7A --- 0.018 0.023 0.76 29.31 0.075 --- 0.014 0.026 0.005
4.00031 Ø 40 x 20
B-15 69.2 0.015 0.53 0.008 0.003 <0.0001 0.006 0.002 ---
SUS-Cu7B --- 0.017 0.023 0.75 29.42 0.073 --- 0.014 0.026 0.005
4.00058 Ø 40 x 20
B-15 69.1 0.015 0.53 0.008 0.003 <0.0001 0.006 0.002 ---
SUS-Cu8 --- --- 0.0015 1.055 4.355 0.385 0.003 0.0015 0.0055
4.00032 Ø 40 x 20
D-15 79.70 0.014 5.43 0.0075 0.026 --- 9.01 ---

These (SUS) Standards are to be used for re-standardization / drift corrections, but are not certified with respect to true composition.
Only approximate values are issued with these Standards.

Page 20 of 20 Updated on 05.10.2016