Statistical Inspector
Statistical Inspector
Advertisement No.504
Notification No. 17/2018 DATED:28.08.2018
Applications are invited only through online mode up to 26.09.2018 for direct recruitment to the
vacancies in the following post.
Individual communication regarding the date and time of Certificate Verification, Oral Test and
Counselling will not be sent to the Candidates, the above details will be made available in the
Commission’s Website. Candidates will be informed of the above fact only through SMS and e-mail.
Name of the Post and Name of the Service and No. of Scale of Pay
Post Code Service Code. vacancies
Tamil Nadu
Statistical Inspector
Animal Husbandry 13 (Level – 18)
(Code No.1697)
Subordinate Service Rs.36,900 - 1,16,600/-
(Code No.020)
The number of vacancies is only approximate and is liable for modification including reduction with
reference to vacancy position at any time before finalisation of selection.
It is mandatory for the applicants to register their basic particulars through One-Time online
Registration system on payment of Rs.150/- (Rupees One Hundred and Fifty only) towards
registration fee and then should apply online for this recruitment. [The One-Time Registration will be
valid for 5 years from the date of registration. Thereafter, the registration should be renewed by paying
the prescribed fee.]
2. DISTRIBUTION OF VACANCIES
The rule of reservation of appointment is applicable for this recruitment and the
Distribution of vacancies is as follows :-
3 1 2 1 1 1 1 1 1 1 13
Abbreviation: GT – General Turn – G – General, W – Women; PSTM - Persons Studied in Tamil Medium; BC –
Backward Class; OBCM – Other than Backward Class Muslim; MBC / DC - Most Backward Class / Denotified
Community; SC - Scheduled Caste;
3. IMPORTANT DATES AND TIME
Date of Notification 28.08.2018
Last date for submission of online application 26.09.2018
Last date for payment of Examination Fee through
28.09.2018
Bank (State Bank of India or Indian Bank)
Date of Written Examination
Paper – I (Subject Paper) 24.11.2018 FN 10.00 A.M. to 01.00 P.M
(Degree Standard)
Paper – II (General Studies) 24.11.2018 AN 02.30 P.M. to 04.30 P.M
(Degree Standard)
2
4. FEES
a) Registration Fee
Rs.150/-
For One-Time Registration (Revised with effect from 01.03.2017 vide
G.O.(Ms).No.32, Personnel and Administrative Reforms (M)
Department, dated 01.03.2017)
Note
Those who have registered in the One -Time registration system and
paid the registration fee of Rs.150/- and received the registration ID
need not pay the Registration fee i.e., Rs.150/- and it is enough to
pay the examination fee alone.
b) Examination Fee
Note Rs.150/-
Note :
(i) The three / two free chances referred to above are not for EACH POST but for ANY THREE /
TWO APPLICATIONS ONLY. The claim for exemption from payment of examination fee made
in any application which is rejected / admitted or withdrawn will be counted as a free chance
availed.
(ii) Failure to pay the prescribed fee along with the application in-time, will result in the rejection of
application.
(iii) The number of free chances availed by the applicant means, the total number of free chances
hitherto availed by the applicant in his/her earlier applications submitted to the Commission for
any post / recruitment.
(iv) If the examination fee concession claimed in the application is found to exceed the admissible
limits, as announced above, the application will be rejected at any stage of selection. The
number of free chances availed by the applicants will be counted from all the previous
applications submitted through One Time Registration and / or submitted directly without One
Time Registration.
[For further details regarding examination fee concession, refer to para. 12 of
the “Instructions to Applicants”].
• Examination fee of Rs.150/- (Rupees One Hundred and Fifty only) is payable online
through Net banking / Credit card / Debit card or it can be paid offline at SBI / Indian Bank
within 2 days from the date of submission of online application, by choosing the option in the
online application.
• Applicants have to register their basic particulars through One-Time Registration which is
mandatory on payment of Rs.150/- (Rupees One Hundred and Fifty only) towards
registration fee and then should apply online for this recruitment. The One-Time Registration
will be valid for 5 years from the date of Registration. Thereafter, the registration should be
renewed by paying the prescribed fee. Applicants who have already registered in One-Time
Registration system by paying Rs.50/- before 01.03.2017 and having validity and those who
have registered for One-Time Registration on or after 01.03.2017 by paying Rs.150/- towards
One-Time Registration are exempted from paying the registration fee for this recruitment.
• Applicants have also to pay the service charges applicable to the State Bank of India /
Indian Bank.
• Applicants can avail exemption from paying examination fees as per eligibility criteria.
• Offline mode of payment in the form of Demand Draft / Postal Order etc., will not be
accepted and the applications forwarded with such modes of payment will be
summarily rejected.
6. QUALIFICATIONS
Note
Applicants not belonging to SC, SC(A), ST, MBC/DC, BC(OBCM), BCM who have put in five
years and more of service in the State / Central Government are not eligible to apply even if they
are within the age limit.
Explanation: - No maximum age limit shall mean that the applicants should not have completed
58 years of age either on the date of notification or at the time of selection/ appointment to the
post.
[For further details regarding Age limit refer para 5 of “Instructions to Applicants”” and
Section 3(r) of Tamil Nadu Government Servants (Conditions of Service) Act, 2016]
Age Concession
Note
(i) The above mentioned age concession will not apply to those Ex-Servicemen Applicants who
have already been recruited to any class or service or category.
(ii) Instructions given with regard to maximum age limit under para 5 of the “Instructions to
Applicants’’ will apply to this recruitment.
Note
i. The degree qualification prescribed for this post should have been obtained by passing the
required qualification in the order of studies, S.S.L.C+ H.Sc or its equivalent + U.G Degree
from the recognised institutions as required under Section 25 of Tamil Nadu Government
Servants (Conditions of Service) Act, 2016.
(Results of the examination should have been declared on or before the date of
notification)
ii. Applicants claiming equivalence of qualification to the prescribed qualification should submit
evidence for equivalence of qualification in the form of Government Order issued on or
before the date of this notification, failing which their application will be summarily
rejected. The Government Orders issued declaring equivalence of prescribed qualification
after the date of this notification will not be accepted under Section 25(b) of Tamil Nadu
Government Servants (Conditions of Service) Act, 2016. A list of Equivalence of qualification
in the related subject is available in Annexure - I to this notification.( Refer also to the
disclaimer annexed to this notification)
7. CONCESSIONS
(i) Concessions in the matter of age and fees allowed to SCs, SC(A)s, STs, MBCs/DCs, BCs,
BCMs, Destitute Widows, Differently Abled Persons, Ex-servicemen, other categories of
persons are given in paras 12 to 14 of the “Instructions to Applicants”.
(ii) Persons claiming concessions referred to above and other claims made in the application,
have to produce evidence for such claims when called for by the Tamil Nadu Public Service
Commission, otherwise their application will be liable for rejection.
Note
In all cases, an Ex-Serviceman once recruited to a post in any class or service or category,
cannot claim the concession of being called an Ex-Serviceman for his further recruitment.
[Proviso to Section 3(j)(vii) of Tamil Nadu Government Servants (Conditions of Service)
Act, 2016]
6
Note
(i) The Syllabus for Examination is furnished in the Annexure II of the notification and
also available in the Commission’s website www.tnpsc.gov.in
(ii) Refer para 22 of “Instructions to Applicants’’ in regard to instructions to be followed
while appearing for competitive examinations conducted by the Commission.
(iii) The questions in Paper I and Paper II will be set in both English and Tamil.
(iv) Candidates should choose and specify in the application only the subject in which
they have obtained the prescribed educational qualification.
Note
(i) Request for change of examination centre / venue will not be entertained. (For further
details refer “Instructions to Applicants”).
(ii) Applicants will be required to appear for the Written Examination / Certificate
Verification / Oral Test at their own expenses.
7
(iii) The Commission reserves the right to increase / decrease the number of Examination
Centres and to re-allot the applicants with respect to the number of candidates opted
for each centre.
D. If no qualified and suitable women applicants are available for selection against the vacancies
reserved for them, those vacancies will be filled up by male applicants belonging to the
respective communal categories.
8
E. The selection for appointment to the above said post is purely provisional subject to final
Orders on pending Writ Petitions, if any, filed at Madras High Court and Madurai Bench of
Madras High Court.
F. As mentioned in Section 26 and 27(c) of the Tamil Nadu Government Servants (Conditions of
Service) Act, 2016, reservation of appointment to Destitute Widows and Ex-Servicemen will
not apply to this recruitment.
G. This post is not identified as suitable for 4% reservation to Differently Abled Persons vide
G.O.(Ms).No.20, Welfare of Differently Abled Persons (DAP 3.2) Department, dated
20.06.2018. Hence, the reservation for Differently Abled Persons is not applicable for this
recruitment.
H. The Differently Abled persons who apply under other eligible category should submit / upload a
copy of Differently Abled Certificate from the competent authority specifying the nature of
physical handicap and the degree of disability as per para 14(b) of “Instructions to Applicants”
for their claim, when called for by the Tamil Nadu Public Service Commission.
I. Even after filling up of the vacancies reserved for SC Arunthathiyars on preferential basis, if
more number of qualified Arunthathiyars are available, they shall be entitled to compete with
the Scheduled Castes other than Arunthathiyars in the inter-se merit among them and if any
post reserved for Arunthathiyars remain unfilled for want of adequate number of qualified
Applicants, it shall be filled up by Scheduled Castes other than Arunthathiyars.
J. Evidence for claims made in the online application should be uploaded / submitted within
stipulated time when the documents are called for by the Tamil Nadu Public Service
Commission. Any subsequent claim made thereafter on submission of online application will
not be entertained. Failure to submit the documents within the stipulated time limit will entail
rejection of the Application.
K. Correct and True information regarding arrest, convictions / debarment / disqualification by any
recruiting agency, criminal or any disciplinary proceedings initiated / pending or finalized,
participation in agitation or any Political Organization, candidature in election for
Parliament/State Legislature/Local Bodies etc., if any, should also be furnished to the
Commission at the time of application i.e., the details thereof, originals of the Judgement, order
or G.O dropping further action in Departmental proceedings or any document that may prove
the suitability of such Applicants for a Government appointment in such cases must be
produced at the stage / time of certificate verification without fail. All such events that occur
after the submission of application and till the date of his / her selection and appointment shall
be reported to the Commission forthwith then and there. Failure to report on the part of
Applicant will be considered as suppression of material information and will attract suitable
penal action.
M. One-Time Registration is not an application for any Post / Recruitment. Though the
details/particulars were furnished in the One-Time Registration by the applicants, the
details/particulars furnished in the online application submitted for this recruitment alone will be
taken into consideration. Tamil Nadu Public Service Commission will not be responsible for
any consequences arising out of furnishing of incorrect and incomplete details in the
application or omission to provide the required details in the application for this recruitment.
9
b) The Hall Tickets for eligible applicants will be made available in the Commission’s Website
www.tnpsc.gov.in or www.tnpscexams.net or www.tnpscexams.in for downloading the same
by applicants. Hall Tickets will not be sent by post. Hence, the applicants should watch
Commission’s website before the scheduled date of examination. The Applicants must
comply with each and every instruction given in the Hall Ticket.
d) After Notification, during the process of recruitment till publication of result, no information,
under Right to Information Act, would be furnished.
iii. Applicants are advised in their own interest not to bring any of the banned items including
Mobile Phones to the venue of the examination, as arrangements for safekeeping cannot
be assured.
f) Unless specific instruction is given, applicants are not required to submit along with their
application any certificates (in support of their claims regarding age, educational qualifications,
physical qualification, community, physical disability etc.,) which should be submitted when
called for by the Commission. Applicants applying for the examination should ensure that they
fulfil all the eligibility conditions for admission to the examination. Their admission at all the
stages of examination for which they are admitted by the Commission will be purely
provisional, subject to their satisfying the prescribed eligibility conditions. If, on verification at
any time before or after the written examination / certificate verification / oral test, it is found
that they do not fulfil any of the eligibility conditions, their candidature for the examination will
be liable for rejection / cancellation by the Commission. (For further details refer to the
“Instructions to Applicants”)
10
g) If any of their claims is found to be incorrect, it will lead to rejection of their candidature and
suitable penal action including debarment.
h) UNFAIR MEANS STRICTLY PROHIBITED: No applicant shall copy from the papers of any
other applicant or permit his/her papers to be copied or give or attempt to give or obtain or
attempt to obtain irregular assistance of any description. [For further details refer “Instructions
to Applicants”].
(vii) Applicants should select the name of the post(s) and service to which they wish to apply.
(viii) An Online application uploaded without the photograph, specified documents and signature
will be rejected.
(ix) All the particulars mentioned in the online application including Name of the Candidate, Post
applied, Educational qualifications, Communal category, Date of Birth, Address, Email ID,
Centre of Examination etc. will be considered as final and no modifications will be allowed
after the last date specified for applying online. Since certain fields are firm and fixed and
cannot be edited, applicants are requested to fill in the online application form with utmost
care and caution as no correspondence regarding change of details will be entertained.
11
(xi) One-Time Registration will not be considered as an application for any post.
Warning
• All the Recruitments by Tamil Nadu Public Service Commission are purely merit
based.
• Tamil Nadu Public Service Commission hereby cautions the candidates against
touts and agents cheating by making false promises of securing job through unfair
means.
• Tamil Nadu Public Service Commission shall not be responsible or liable for any
loss that may be caused to any candidate on account of indulging into any sort of
actions with such unscrupulous persons.
vr;rhpf;if
• njh;thizaj;jpd; bjhpt[fs; midj;Jk; tpz;zg;gjhuu;fspd; ju thpirg;gona
nkw;bfhs;sg;gLfpd;wd/
• bgha;ahd thf;FWjpfis brhy;yp. jtwhd tHpapy; ntiy th’;fp jUtjhf TWk;
,ilj;jufu;fsplk; tpz;zg;gjhuu;fs; kpft[k; ftdkhf ,Uf;FkhW
vr;rhpf;fg;gLfpwhh;fs;/
• ,Jnghd;w jtwhd kw;Wk; neh;ikaw;w egh;fshy; tpz;zg;gjhuu;fSf;F Vw;gLk;
ve;jbthU ,Hg;g[f;Fk; njh;thizak; ve;jtpjj;jpYk; bghWg;gy;y/
Secretary
12
DISCLAIMER
Secretary
13
ANNEXURE-I
ANNEXURE – II
Syllabus
PAPER-I
MATHEMATICS / MATHEMATICS WITH STATISTICS (DEGREE STANDARD)
CODE NO: 276
UNIT I
ALGEBRA AND TRIGONOMETRY
Theory of Equations: Polynomial equations; Imaginary and irrational roots; Symmetric
functions of roots in terms of coefficient; Sum of rth powers of roots; Reciprocal equations;
Transformations of equations. Descrates’ rule of signs: Approximate solutions of roots of
polynomials by Newton - Raphson Method - Horner’s method; Cardan’s method of solution of
a cubic polynomial. Summation of Series: Binomial, Exponential and Logarithmic series
theorems; Summation of finite series using method of differences - simple problems.
Expansions of sin x, cos x, tan x in terms of x; sin nx, cos nx, tan nx, sin nx, cos nx , tan nx,
hyperbolic and inverse hyperbolic functions - simple problems. Symmetric; Skew Symmetric;
Hermitian; Skew Hermitian; Orthogonal and Unitary Matrices; Rank of a matrix; Consistency
and solutions of Linear Equations; Cayley Hamilton Theorem; Eigen values; Eigen Vectors;
Similar matrices; Diagonalization of a matrix. Equivalence relations; Groups; subgroups –
cyclic groups and properties of cyclic groups - simple problems; Lagrange’s theorem; Prime
number; Composite number; decomposition of a composite number as a product of primes
uniquely (without proof); divisors of a positive integer n; congurence modulo n; Euler function;
highest power of a prime number p contained in n!; Fermat’s and Wilson’s theroems - simple
problems. Sums of sines and cosines of n angles which are in A.P.; Summation of
trigonometric series using telescopic method, C + i S method.
UNIT II
CALCULUS, COORDINATE GEOMETRY OF 2 DIMENSIONS AND DIFFERENTIAL
GEOMETRY
nth derivative; Leibnitz’s theorem and its applications; Partial differentiation.Total differentials;
Jacobians; Maxima and Minima of functions of 2 and 3 independent variables - necessary and
sufficient conditions; Lagrange’s method – simple problems on these concepts.
Methods of integration; Properties of definite integrals; Reduction formulae - Simple
problems.
Conics - Parabola, ellipse, hyperbola and rectangular hyperbola - pole, polar, co-normal
points, con-cyclic points, conjugate diameters, asymptotes and conjugate hyperbola.
Curvature; radius of curvature in Cartesian coordinates; polar coordinates; equation of a
straight line, circle and conic; radius of curvature in polar coordinates; p-r equations; evolutes;
envelopes.
Methods of finding asymptotes of rational algebraic curves with special cases. Beta and
Gamma functions, properties and simple problems. Double Integrals; change of order of
integration; triple integrals; applications to area, surface are volume.
UNIT III
DIFFERENTIAL EQUATIONS AND LAPLACE TRANSFORMS
First order but of higher degree equations – solvable for p, solvable for x, solvable for y,
clairaut’s form – simple problems.
Second order differential equations with constant coefficients with particular integrals for
eax, xm, eax sin mx, eax cos mx
15
𝑑𝑑 2 𝑦𝑦 𝑑𝑑𝑑𝑑
Second order differential equations with variable coefficients 𝑎𝑎𝑥𝑥 2 𝑑𝑑𝑥𝑥 2
+ 𝑏𝑏𝑏𝑏 𝑑𝑑𝑑𝑑 + 𝑐𝑐𝑐𝑐 = 𝑞𝑞(𝑥𝑥)
Method of variation of parameters; Total differential equations, simple problems. Partial
Differential equations : Formation of P.D.E by eliminating arbitrary constants and arbitrary
functions; complete integral; Singular integral ; general integral; Charpit’s method and standard
types f(p,q)=0, f(x,p,q)=0, f(y,p,q)=0, f(z,p,q)=0, f(x,p)= f(y,q); Clairaut’s form and Lagrange’s
equations Pp+Qq=R – simple problems.
Laplace transform; inverse Laplace transform(usual types); applications of Laplace transform
to solution of first and second order linear differential equations (constant coefficients) and
simultaneous linear differential equations – simple problems.
UNIT IV
VECTOR CALCULUS, FOURIER SERIES AND FOURIER TRANSFORMS
Vector Differentiation : Gradient, divergence, curl, directional derivative, unit normal to a
surface.
Vector integration: line, surface and volume integrals; theorems of Gauss, Stokes and Green –
simple problems.
Fourier Series: Expansions of periodic function of period 2π ; expansion of even and odd
functions; half range series.
Fourier Transform: Infinite Fourier transform (Complex form, no derivation); sine and cosine
transforms; simple properties of Fourier Transforms; Convolution theorem; Parseval’s identity.
UNIT V
ALGEBRAIC STRUCTURES
Groups: Subgroups, cyclic groups and properties of cyclic groups – simple problems;
Lagrange’s Theorem; Normal subgroups; Homomorphism; Automorphism ; Cayley’s Theorem,
Permutation groups.
Rings: Definition and examples, Integral domain, homomorphism of rings, Ideals and quotient
Rings, Prime ideal and maximum ideal; the field and quotients of an integral domain,
Euclidean Rings.
Vector Spaces: Definition and examples, linear dependence and independence, dual spaces,
inner product spaces.
Linear Transformations: Algebra of linear transformations, characteristic roots, matrices,
canonical forms, triangular forms.
UNIT VI
REAL ANALYSIS
Sets and Functions: Sets and elements; Operations on sets; functions; real valued functions;
equivalence; countability; real numbers; least upper bounds.
Sequences of Real Numbers: Definition of a sequence and subsequence; limit of a sequence;
convergent sequences; divergent sequences; bounded sequences; monotone sequences;
operations on convergent sequences; operations on divergent sequences; limit superior and
limit inferior; Cauchy sequences.
Series of Real Numbers: Convergence and divergence; series with non-negative numbers;
alternating series; conditional convergence and absolute convergence; tests for absolute
convergence; series whose terms form a non-increasing sequence; the class I2. Limits and
metric spaces: Limit of a function on a real line; metric spaces; limits in metric spaces.
Continuous functions on Metric Spaces: Functions continuous at a point on the real line,
reformulation, functions continuous on a metric space, open sets, closed sets, discontinuous
functions on the real line.
16
Connectedness Completeness and compactness: More about open sets, connected sets,
bounded sets and totally bounded sets, complete metric spaces, compact metric spaces,
continuous functions on a compact metric space, continuity of inverse functions, uniform
continuity.
Calculus: Sets of measure zero, definition of the Riemann integral, existence of the Riemann
integral properties of Riemann integral, derivatives, Rolle’s theorem, Law of mean,
Fundamental theorems of calculus, Taylor’s theorem. Sequences and Series of Functions.
Pointwise convergence of sequences of functions, uniform convergence of sequences of
functions.
UNIT VII
COMPLEX ANALYSIS
Complex numbers: Point at infinity , Stereographic projection
Analytic functions: Functions of a complex variable , mappings, limits , theorems of limits,
continuity, derivatives, differentiation formula, Cauchy-Riemann equations, sufficient conditions
Cauchy-Riemann equations in polar form, analytic functions, harmonic functions.
Mappings by elementary functions: linear functions, the function 1/z, linear fractional
transformations , the functions w=zn, w=ez, special linear fractional transformations.
Integrals: definite integrals, contours , line integrals, Cauchy-Goursat theorem, Cauchy integral
formula, derivatives of analytic functions, maximum moduli of functions.
Series: convergence of sequences and series,Taylor’s series, Laurent’s series, zero’s of
analytic functions.
Residues and poles: residues, the residue theorem, the principal part of functions, poles,
evaluation of improper real integrals, improper integrals, integrals involving trigonometric
functions, definite integrals of trigonometric functions
UNIT VIII
DYNAMICS AND STATICS
DYNAMICS: kinematics of a particle, velocity, acceleration, relative velocity, angular velocity,
Newton’s laws of motion, equation of motion, rectilinear motion under constant acceleration,
simple harmonic motion.
Projectiles : Time of flight, horizontal range, range in an inclined plane. Impulse and impulsive
motion, collision of two smooth spheres, direct and oblique impact-simple problems.
Central forces : Central orbit as plane curve, p-r equation of a central orbit, finding law of force
and speed for a given central orbit, finding the central orbit for a given law of force.
Moment of inertia : Moment of inertia of simple bodies, theorems of parallel and perpendicular
axes, moment of inertia of triangular lamina, circular lamina, circular ring, right circular cone,
sphere (hollow and solid).
STATICS: Types of forces, Magnitude and direction of the resultant of the forces acting on a
particle, Lami’s Theorem, equilibrium of a particle under several coplanar forces, parallel
forces, moments, couples-simple problems.
Friction: Laws of friction, angle of friction, equilibrium of a body on a rough inclined plane acted
on by several forces, centre of gravity of simple uniform bodies, triangular lamina, rods forming
a triangle, trapezium, centre of gravity of a circular arc, elliptic quadrant, solid and hollow
hemisphere, solid and hollow cone, catenary-simple problems.
17
UNIT IX
OPERATIONS RESEARCH
Linear programming – formulation – graphical solution – simplex method - Big-M method –
Two-phase method-duality- primal-dual relation – dual simplex method – revised simplex
method – Sensitivity analysis. Transportation problem – assignment problem. Sequencing
problem – n jobs through 2 machines – n jobs through 3 machines – two jobs through m
machines – n jobs through m machines PERT and CPM : project network diagram – Critical
path (crashing excluded) – PERT computations. Queuing theory – Basic concepts – Steady
state analysis of M/M/1 and M/M/systems with infinite and finite capacities.
Inventory models : Basic concepts - EOQ models : (a) Uniform demand rate infinite production
rate with no shortages (b) Uniform demand rate Finite production rate with no shortages –
Classical newspaper boy problem with discrete demand – purchase inventory model with one
price break.
Game theory : Two-person Zero-sum game with saddle point – without saddle point –
dominance – solving 2 x n or m x 2 game by graphical method. Integer programming : Branch
and bound method.
UNIT X
MATHEMATICAL STATISTICS
Statistics – Definition – functions – applications – complete enumeration – sampling methods –
measures of central tendency – measures of dispersion – skewnesskurtosis. Sample space –
Events, Definition of probability (Classical, Statistical & Axiomatic ) – Addition and
multiplication laws of probability – Independence – Conditional probability – Bayes theorem –
simple problems. Random Variables (Discrete and continuous), Distribution function –
Expected values & moments – Moment generating function – probability generating function –
Examples. Characteristic function – Uniqueness and inversion theorems – Cumulants,
Chebychev’s inequality – Simple problems. Concepts of bivariate distribution – Correlation :
Rank correlation coefficient – Concepts of partial and multiple correlation coefficients –
Regression : Method of Least squares for fitting Linear, Quadratic and exponential curves -
simple problems. Standard distributions – Binomial, Hyper geometric, Poission, Normal and
Uniform distributions – Geometric, Exponential, Gamma and Beta distributions, Inter-
relationship among distributions. Sampling Theory – sampling distributions – concept of
standard error-sampling distribution based on Normal distribution : t, chi-square and F
distribution. Point estimation-concepts of unbiasedness, consistency, efficiency and
sufficiency- Cramer Rao inequality-methods of estimation : Maximum likelihood, moments and
minimum chi-square and their properties. Test of Significance-standard error-large sample
tests. Exact tests based on Normal, t, chi-square and F distributions with respect to population
mean/means, proportion/proportions variances and correlation co-efficient. Theory of attributes
– tests of independence of attributes based on contingency tables – goodness of fit tests
based on Chi-square.
Analysis of variance : One way, two-way classification – Concepts and problems, interval
estimation – confidence intervals for population mean/means, proportion/proportions and
variances based on Normal, t, chi-square and F. Tests of hypothesis : Type I and Type II
errors – power of test-Neyman Pearson Lemma – Likelihood ratio tests – concepts of most
powerful test –simple problems
18
PAPER-I
STATISTICS (UG STANDARD)
CODE NO:274
UNIT I :
Uses, Scope and limitation of Statistics, Collection, Classification and Tabulation of data,
Diagramatic and Graphical representation, Measures of location, dispersion, Skewness and
Kurtosis – Correlation and regression – Curve Fitting – Linear and Quadratic equation by the
method of least squares.
UNIT II :
Probability - Addition, Multiplication and Baye’s Theorems and their application. Tchebychev’s
inequality. Random variables – Univariate and Bivariate – Probability distributions – Marginal
and conditional distributions – Expectations – Moments and cumulants generating functions.
UNIT III :
Probability distributions – Binomial, Poisson, Geometric and Hypergeometric. Continuous
distributions – Uniform, exponential and normal. Sampling distributions and standard error,
student’s ‘t’, Chi-square and F statistic – distributions and their applications.
UNIT IV :
Estimation – Point estimation – properties of estimates Neyman – Fisher Factorization
theorem(without proof) Cramer – Rao inequality, Rao – Blackwell theorem – MLE and method
of Moments estimation – Interval estimation – for population mean and variance based on
small and large samples.
UNIT V :
Tests of Hypothesis – Null and Alternative – Types of errors – Power of test, Neyman –
Pearson lemma, UMP and Likelihood ratio tests, Test procedures for large and small samples
– Independence of attributes, Chi-square test – Goodness of fit.
UNIT VI :
Simple random sample – stratified, systematic, Cluster (Single stage) Estimation of mean and
variance in SKS – Sample Survey – Organisation – CSO and NSSO – Sampling and Non-
Sampling errors. Analysis of Variance – Principles of design CRD, RBD and LSD – Factorial
experiments 22, 23 and 32 (Without confounding) Missing plot techniques.
UNIT VII :
Concept of SQC – Control Charts – X, R, p and charts Acceptance sampling plan – single and
double – OC curves Attributes and Variables plan. OR Models – Linear Programming
problems – Simplex method Dual – Primal, Assignment problems, Net work – CPM and PERT
UNIT VIII :
Time series – Different components – Trend and Seasonal Variations – Determination and
elimination
UNIT IX :
Index Numbers – Construction and uses – Different kinds of simple and weighted index
numbers – Reversal tests – construction and use of cost of living index numbers – Birth and
death rates – Crude and standard death rates, Fertility rates – Life table construction and
uses.
UNIT X :
Statistical Computing using Excel – Understanding on the usage of Statistical Packages
including SPSS, MINITAB and SAS.
19
PAPER- II
GENERAL STUDIES (DEGREE STANDARD / OBJECTIVE TYPE)
UNIT-III: GEOGRAPHY
Earth and Universe‐Solar system ‐ Atmosphere hydrosphere, lithosphere‐ Monsoon, rainfall,
weather and climate‐Water resources ‐ rivers in India‐ Soil, minerals & natural
resources‐Natural vegetation‐Forest & wildlife ‐ Agricultural pattern, livestock &
fisheries‐Transport including Surface transport & communication ‐ Social geography –
population density and distribution‐Natural calamities – disaster management‐Climate change
‐ impact and consequences ‐ mitigation measures‐Pollution Control.
20
Annexure III
Tentative Timeline for the Recruitment Process
Sl. No. Process Timeline
Secretary