eNodeB

Basic Commands
S1-UP, S1-CP, S1, X2 Links
and Handover
 How to verify connection between eNodeB an MME
(S1-Control Plane) after eNB or MME restart >st
mme or st termpointtomme
DFWe0600037> st mme

100727-13:22:42 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

===================================================================================
Proxy Adm State Op. State MO
===================================================================================
886 1 (UNLOCKED) 1 (ENABLED) ENodeBFunction=1,TermPointToMme=MME010012008226
===================================================================================
Total: 1 MOs

DFWe0600037> st termpointtomme

100727-13:23:01 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

===================================================================================
Proxy Adm State Op. State MO
===================================================================================
886 1 (UNLOCKED) 1 (ENABLED) ENodeBFunction=1,TermPointToMme=MME010012008226
===================================================================================
Total: 1 MOs

To find out IP address for MME

>get <proxy#>
How to Verify connection between eNodeB to SGW S1-
UP (S1 – User Plane) after eNB or SGW restart

To verify S1-UP (link from eNodeB to S-GW), you have to run ping command from
UE to application server.

Ping <IP address> -t

 How to verify connection X2 link (Links between eNB)
DFWe0600037> st termpointtoenb

100727-14:28:05 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

===================================================================================
Proxy Adm State Op. State MO
===================================================================================
684 1 (UNLOCKED) 1 (ENABLED) ENodeBFunction=1,EUtraNetwork=1,ExternalENodeBFunction=DFWe0600671,TermPointToENB=DFWe0600671
692 1 (UNLOCKED) 1 (ENABLED) ENodeBFunction=1,EUtraNetwork=1,ExternalENodeBFunction=DFWe0600008,TermPointToENB=DFWe0600008
694 1 (UNLOCKED) 1 (ENABLED) ENodeBFunction=1,EUtraNetwork=1,ExternalENodeBFunction=DFWe0600029,TermPointToENB=DFWe0600029
703 1 (UNLOCKED) 1 (ENABLED) ENodeBFunction=1,EUtraNetwork=1,ExternalENodeBFunction=DFWe0600607,TermPointToENB=DFWe0600607
708 1 (UNLOCKED) 1 (ENABLED) ENodeBFunction=1,EUtraNetwork=1,ExternalENodeBFunction=DFWe0600049,TermPointToENB=DFWe0600049
712 1 (UNLOCKED) 1 (ENABLED) ENodeBFunction=1,EUtraNetwork=1,ExternalENodeBFunction=DFWe0600674,TermPointToENB=DFWe0600674
718 1 (UNLOCKED) 1 (ENABLED) ENodeBFunction=1,EUtraNetwork=1,ExternalENodeBFunction=DFWe0600055,TermPointToENB=DFWe0600055
722 1 (UNLOCKED) 1 (ENABLED) ENodeBFunction=1,EUtraNetwork=1,ExternalENodeBFunction=DFWe0600007,TermPointToENB=DFWe0600007
725 1 (UNLOCKED) 1 (ENABLED) ENodeBFunction=1,EUtraNetwork=1,ExternalENodeBFunction=DFWe0600036,TermPointToENB=DFWe0600036
730 1 (UNLOCKED) 1 (ENABLED) ENodeBFunction=1,EUtraNetwork=1,ExternalENodeBFunction=DFWe0600044,TermPointToENB=DFWe0600044

This command will verify X2 links. A

maximum of 64 host MOs
(IpAccessHostGpb, IpAccessHostSpb
and IpAccessHostEt) can be
configured in a node.
A maximum of 64 host MOs
(IpAccessHostGpb, IpAccessHostSpb
and IpAccessHostEt) can be
connected to IpInterface MOs on one
board.
How to list relation
DFWe0600037> pr relat

100727-14:44:06 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

===================================================================================
Proxy MO
===================================================================================
633 ENodeBFunction=1,EUtranCellFDD=DFWe06000372,EUtranFreqRelation=1
634 ENodeBFunction=1,EUtranCellFDD=DFWe06000372,EUtranFreqRelation=1,EUtranCellRelation=DFWe06000021
635 ENodeBFunction=1,EUtranCellFDD=DFWe06000372,EUtranFreqRelation=1,EUtranCellRelation=DFWe06004332
636 ENodeBFunction=1,EUtranCellFDD=DFWe06000372,EUtranFreqRelation=1,EUtranCellRelation=DFWe06000061
637 ENodeBFunction=1,EUtranCellFDD=DFWe06000372,EUtranFreqRelation=1,EUtranCellRelation=DFWe06000443
638 ENodeBFunction=1,EUtranCellFDD=DFWe06000372,EUtranFreqRelation=1,EUtranCellRelation=DFWe06000482
639 ENodeBFunction=1,EUtranCellFDD=DFWe06000372,EUtranFreqRelation=1,EUtranCellRelation=DFWe06004592
640 ENodeBFunction=1,EUtranCellFDD=DFWe06000372,EUtranFreqRelation=1,EUtranCellRelation=DFWe06000351
641 ENodeBFunction=1,EUtranCellFDD=DFWe06000372,EUtranFreqRelation=1,EUtranCellRelation=DFWe06000471
642 ENodeBFunction=1,EUtranCellFDD=DFWe06000372,EUtranFreqRelation=1,EUtranCellRelation=DFWe06000373
643 ENodeBFunction=1,EUtranCellFDD=DFWe06000372,EUtranFreqRelation=1,EUtranCellRelation=DFWe06000291
644 ENodeBFunction=1,EUtranCellFDD=DFWe06000372,EUtranFreqRelation=1,EUtranCellRelation=DFWe06056744
645 ENodeBFunction=1,EUtranCellFDD=DFWe06000372,EUtranFreqRelation=1,EUtranCellRelation=DFWe06000072
646 ENodeBFunction=1,EUtranCellFDD=DFWe06000372,EUtranFreqRelation=1,EUtranCellRelation=DFWe06000492
647 ENodeBFunction=1,EUtranCellFDD=DFWe06000372,EUtranFreqRelation=1,EUtranCellRelation=DFWe06000062
648 ENodeBFunction=1,EUtranCellFDD=DFWe06000372,EUtranFreqRelation=1,EUtranCellRelation=DFWe06050506
649 ENodeBFunction=1,EUtranCellFDD=DFWe06000372,EUtranFreqRelation=1,EUtranCellRelation=DFWe06000551
650 ENodeBFunction=1,EUtranCellFDD=DFWe06000372,EUtranFreqRelation=1,EUtranCellRelation=DFWe06000363
651 ENodeBFunction=1,EUtranCellFDD=DFWe06000372,EUtranFreqRelation=1,EUtranCellRelation=DFWe06006742
How to check HO feature is ACTIVATED. If the feature
doesn’t activate, eNB will not able to do HO
DFWe0600037> get intralte

100727-14:41:30 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

===========================================================================================================
======
21 SystemFunctions=1,Licensing=1,OptionalFeatures=1,IntraLTEHandover=1
===========================================================================================================
======
IntraLTEHandoverId 1
featureStateIntraLTEHandover 1 (ACTIVATED)
keyIdIntraLTEHandover CXC4010612
licenseStateIntraLTEHandover 0 (DISABLED)
serviceStateIntraLTEHandover 1 (OPERABLE)
===========================================================================================================
======
30 SystemFunctions=1,Licensing=1,OptionalFeatures=1,IntraLTEHODataFwd=1
===========================================================================================================
======
IntraLTEHODataFwdId 1
featureStateIntraLTEHODataFwd 0 (DEACTIVATED)
keyIdIntraLTEHODataFwd CXC4010613
licenseStateIntraLTEHODataFwd 0 (DISABLED)
serviceStateIntraLTEHODataFwd 0 (INOPERABLE)
===========================================================================================================
======
Total: 2 MOs
How to Verify ipaccesshost for source eNB.
Ipaccesshost is IP (get ipaccesshostet)
DFWe0600037> get ipaccesshostet

100727-14:11:52 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

===================================================================================
==============================
620 IpSystem=1,IpAccessHostEt=1
===================================================================================
==============================
IpAccessHostEtId 1
administrativeState 1 (UNLOCKED)
availabilityStatus 0 (NO_STATUS)
ipAddress 10.26.4.170
ipDefaultTtl 64
ipInterfaceMoRef
Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=2
ntpDscp 54
ntpServerMode 0 (DISABLED)
operationalState
reservedBy
1 (ENABLED)
[1] =
To get ipaccesshost
>>> reservedBy = IpSystem=1,IpAccessSctp=1
userLabel
For target eNB, from
===================================================================================
============================== X2 link. Select eNB
Total: 1 MOs
You want to get
Ipaccesshost and
type
>get <proxy>
eNB at Site Level and
and Cell Level
How to check status of cell and sector, lock/unlock cell
DFWe0600037> st fdd

100727-14:46:20 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

===================================================================================
Proxy Adm State Op. State MO
===================================================================================
628 1 (UNLOCKED) 1 (ENABLED) ENodeBFunction=1,EUtranCellFDD=DFWe06000372
842 1 (UNLOCKED) 1 (ENABLED) ENodeBFunction=1,EUtranCellFDD=DFWe06000373
889 1 (UNLOCKED) 1 (ENABLED) ENodeBFunction=1,EUtranCellFDD=DFWe06000371
===================================================================================
Total: 3 MOs

DFWe0600037> st sec

100727-14:46:26 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

===================================================================================
Proxy Adm State Op. State MO
===================================================================================
938 1 (UNLOCKED) 1 (ENABLED) SectorEquipmentFunction=S1
939 1 (UNLOCKED) 1 (ENABLED) SectorEquipmentFunction=S2
944 1 (UNLOCKED) 1 (ENABLED) SectorEquipmentFunction=S3
===================================================================================
Total: 3 MOs

DFWe0600531> bl cellfdd

100809-16:20:22 10.26.66.110 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/28360

Block following MOs ?
===================================================================================
629 ENodeBFunction=1,EUtranCellFDD=DFWe06005311
903 ENodeBFunction=1,EUtranCellFDD=DFWe06005312
957 ENodeBFunction=1,EUtranCellFDD=DFWe06005313
===================================================================================
Are you Sure [y/n] ?
Yes for lock cell and No for unlock cell

DFWe0600531> deb cellfdd

100809-16:27:04 10.26.66.110 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/28360

Deblock following MOs ?
===================================================================================
629 ENodeBFunction=1,EUtranCellFDD=DFWe06005311
903 ENodeBFunction=1,EUtranCellFDD=DFWe06005312
957 ENodeBFunction=1,EUtranCellFDD=DFWe06005313
===================================================================================
Are you Sure [y/n] ?
Yes for l unlock cell and No for lock cell
How to verify eNodeB health check
DFWe0600037> acc 0 starthealthcheck

100727-15:06:22 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

Call Action starthealthcheck on following MOs ?
===================================================================================
0 ManagedElement=1
===================================================================================
Are you Sure [y/n] ? y

=================================================================================================================
Proxy MO Action Nr of Params
=================================================================================================================
0 ManagedElement=1 startHealthCheck 0
>>> Return value = 0 (STARTED)

=================================================================================================================
Total: 1 MOs attempted, 1 MOs actioned

How to restart eNB

DFWe0600531> acc 0 manualrestart

100809-17:23:20 10.26.66.110 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/28638

Call Action manualrestart on following MOs ?
===================================================================================
0 ManagedElement=1
INFO: The RBS node DFWE0600531 will be restarted on CV: EnclosureProductDataMismatch_Fix
===================================================================================
Are you Sure [y/n] ? ….

How to show log status of cell

DFWe0600037> llog

100727-15:07:20 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

$ llog
--------------------------------------------------------------------------------
1. [00-00-00 00:00:00] 0x00000003 (2) Error log was cleared at last restart..
--------------------------------------------------------------------------------
2. [70-01-01 00:00:12] 0xB0AD0001 (2) Board manager restart.. Reset aft
--------------------------------------------------------------------------------
3. [10-07-04 00:23:52] 0xF0F0F0F2 (2) Recovery action, faultId: 0x203, (SwDow
--------------------------------------------------------------------------------
4. [10-07-04 00:23:52] 0xB0AD0005 (2) Board manager restart escalate..
--------------------------------------------------------------------------------
5. [10-07-10 14:42:49] 0xB0AD0002 (2) Board manager restart.. .
$
How to check the software package of eNodeB
DFWe0600037> pr upgrade

100727-14:49:14 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

===================================================================================
Proxy MO
===================================================================================
205 SwManagement=1,UpgradeTrace=1
207 SwManagement=1,UpgradePackage=R20BT
233 SwManagement=1,UpgradePackage=CXP102051/1_R20DN
278 SwManagement=1,Repertoire=CPP_Control_Upgrade_2
436 SwManagement=1,UpgradePackage=CXP102051/1_R20GY
442 SwManagement=1,Repertoire=CPP_IP_Tran_Upgrade_2
490 SwManagement=1,UpgradePackage=InitialUP
597 SwManagement=1,UpgradePackage=CXP102051/1_R20EM
===================================================================================
Total: 8 MOs
Current CV
How to check CV
• DFWe0600037> cvcu

• 100727-14:50:13 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

• =======================================================================================================
============
• 100727-14:50 CV Name Upgrade Package Release
• =======================================================================================================
============
• Startable: Pre_Launch_Samsung_settings CXP102051/1_R20GY L10 (EP19-CPP_7.0.3.10.1)
• Loaded: Pre_Launch_Samsung_settings CXP102051/1_R20GY L10 (EP19-CPP_7.0.3.10.1)
• Executing: Pre_Launch_Samsung_settings CXP102051/1_R20GY L10 (EP19-CPP_7.0.3.10.1)
• Last created: Pre_Launch_Samsung_settings CXP102051/1_R20GY L10 (EP19-CPP_7.0.3.10.1)
• -------------------------------------------------------------------------------------------------------------------
• Current UpgradePkg: UpgradePackage=CXP102051/1_R20GY CXP102051/1_R20GY L10 (EP19-CPP_7.0.3.10.1)
• AutoCreatedCV: Disabled
• Ongoing CV activity: 0 (IDLE)
• Rollback status: Rollback is on
• Rollback init timer: 30
• Rollback init counter: 2
• Rollback counter: 2
• Rollback list: s[2] = Internal_Relation_add_0607 Fi_CXP102051%1_R20DN_100428_0106
• =======================================================================================================
===============================

To delete old cv :
>cvrm <cv name>
To set new cv from the list:
>cvset <cv name>
To create cv after any change make:
>cvms <cv name> (Have to be a new name, can’t overwrite the old name).
eNB Related Hardware
 To List of RF ports, RI ports
DFWe0600037> lpr rfport

100727-17:24:57 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

===================================================================================
Proxy MO
===================================================================================
158 Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,DeviceGroup=ru,RfPort=B
159 Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,DeviceGroup=ru,RfPort=A
163 Equipment=1,RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,DeviceGroup=ru,RfPort=A
166 Equipment=1,RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,DeviceGroup=ru,RfPort=B
177 Equipment=1,RbsSubrack=1,RbsSlot=3,AuxPlugInUnit=RU-1-3,DeviceGroup=ru,RfPort=B
178 Equipment=1,RbsSubrack=1,RbsSlot=3,AuxPlugInUnit=RU-1-3,DeviceGroup=ru,RfPort=A
===================================================================================
Total: 6 MOs

DFWe0600037> lpr riport

100727-17:26:57 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

===================================================================================
Proxy MO
===================================================================================
76 Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort=B
77 Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort=C
84 Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort=E
86 Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort=A
88 Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort=D
103 Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort=F
153 Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,RiPort=DATA_1
154 Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,RiPort=DATA_2
167 Equipment=1,RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,RiPort=DATA_1
168 Equipment=1,RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,RiPort=DATA_2
173 Equipment=1,RbsSubrack=1,RbsSlot=3,AuxPlugInUnit=RU-1-3,RiPort=DATA_1
174 Equipment=1,RbsSubrack=1,RbsSlot=3,AuxPlugInUnit=RU-1-3,RiPort=DATA_2
===================================================================================
Total: 12 MOs

DUL
 How to list of antennagroup (see attached diagram
for all related MOs
• DFWe0600037> lpr antennaunitgroup

• 100727-17:28:00 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

• ===================================================================================
• Proxy MO
• ===================================================================================
• 123 Equipment=1,AntennaUnitGroup=1
• 124 Equipment=1,AntennaUnitGroup=1,RfBranch=2
• 125 Equipment=1,AntennaUnitGroup=1,RfBranch=1
• 126 Equipment=1,AntennaUnitGroup=1,AntennaUnit=1
• 127 Equipment=1,AntennaUnitGroup=1,AntennaUnit=1,AntennaSubunit=1
• 128 Equipment=1,AntennaUnitGroup=1,AntennaUnit=1,AntennaSubunit=1,AuPort=2
• 129 Equipment=1,AntennaUnitGroup=1,AntennaUnit=1,AntennaSubunit=1,AuPort=1
• 182 Equipment=1,AntennaUnitGroup=3
• 183 Equipment=1,AntennaUnitGroup=3,RfBranch=2
• 184 Equipment=1,AntennaUnitGroup=3,RfBranch=1
• 185 Equipment=1,AntennaUnitGroup=3,AntennaUnit=1
• 186 Equipment=1,AntennaUnitGroup=3,AntennaUnit=1,AntennaSubunit=1
• 187 Equipment=1,AntennaUnitGroup=3,AntennaUnit=1,AntennaSubunit=1,AuPort=2
• 188 Equipment=1,AntennaUnitGroup=3,AntennaUnit=1,AntennaSubunit=1,AuPort=1
• 196 Equipment=1,AntennaUnitGroup=2
• 197 Equipment=1,AntennaUnitGroup=2,AntennaUnit=1
• 198 Equipment=1,AntennaUnitGroup=2,AntennaUnit=1,AntennaSubunit=1
• 199 Equipment=1,AntennaUnitGroup=2,AntennaUnit=1,AntennaSubunit=1,AuPort=1
• 200 Equipment=1,AntennaUnitGroup=2,AntennaUnit=1,AntennaSubunit=1,AuPort=2
• 201 Equipment=1,AntennaUnitGroup=2,RfBranch=2
• 202 Equipment=1,AntennaUnitGroup=2,RfBranch=1
• ===================================================================================
• Total: 21 MOs
How to verify IPinterdace (IP for GigB port)

DFWe0600037> get interface addressactive

100727-15:02:46 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

===========================================================================
======================================
MO Attribute Value
===========================================================================
======================================
Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=1
ownIpAddressActive xx.xx.xx.xx
Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=2
ownIpAddressActive xx.xx.xx.xx
===========================================================================
======================================
Total: 2 MOs
How to list radio board unit
DFWe0600037> lst ru

100727-15:28:17 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

===================================================================================
Proxy Adm State Op. State MO
===================================================================================
52 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,GeneralProcessorUnit=1
53 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,GeneralProcessorUnit=1,MediumAccessUnit=1
152 1 (UNLOCKED) 1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5
153 1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,RiPort=DATA_1
154 0 (DISABLED) Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,RiPort=DATA_2
155 1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,DeviceGroup=ru
158 1 (UNLOCKED) 1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,DeviceGroup=ru,RfPort=B
159 1 (UNLOCKED) 1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,DeviceGroup=ru,RfPort=A
161 1 (UNLOCKED) 1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1
162 1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,DeviceGroup=ru
163 1 (UNLOCKED) 1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,DeviceGroup=ru,RfPort=A
166 1 (UNLOCKED) 1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,DeviceGroup=ru,RfPort=B
167 1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,RiPort=DATA_1
168 0 (DISABLED) Equipment=1,RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,RiPort=DATA_2
172 1 (UNLOCKED) 1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=3,AuxPlugInUnit=RU-1-3
173 1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=3,AuxPlugInUnit=RU-1-3,RiPort=DATA_1
174 0 (DISABLED) Equipment=1,RbsSubrack=1,RbsSlot=3,AuxPlugInUnit=RU-1-3,RiPort=DATA_2
175 1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=3,AuxPlugInUnit=RU-1-3,DeviceGroup=ru
177 1 (UNLOCKED) 1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=3,AuxPlugInUnit=RU-1-3,DeviceGroup=ru,RfPort=B
178 1 (UNLOCKED) 1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=3,AuxPlugInUnit=RU-1-3,DeviceGroup=ru,RfPort=A
===================================================================================
Total: 20 MOs

DFWe0600037> st device

100727-15:04:15 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

===================================================================================
Proxy Adm State Op. State MO
===================================================================================
71 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,DeviceGroup=dul
155 1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,DeviceGroup=ru
162 1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,DeviceGroup=ru
175 1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=3,AuxPlugInUnit=RU-1-3,DeviceGroup=ru
===================================================================================
Total: 4 MOs
Shows all RUS boards installed in the ENodeB

DFWe0600531> cabx

100804-11:26:30 10.26.66.110 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/11419

.
=====================================================================================================
SMN APN BOARD GREEN YELLOW RED PRODUCT NR REV DATE SERIAL NR TEMP COREMGR
=====================================================================================================
0 1 DUL 20 01 ON OFF OFF KDU 137 533/3 R2C 20100406 C823455278
-----------------------------------------------------------------------------------------------------

================================================================
SMN ProductNr Rev Name Date SerialNr
================================================================
0 ROJ 999 999 * BACKPLANE
----------------------------------------------------------------

===========================================================================================================
=====================
SMN APN PORT BOARD GREEN YELLOW RED PRODUCT NR REV DATE SERIAL NR
===========================================================================================================
=====================
0 1 BXP_0_1 RUS steady 16 off KRC 118 59/1 R2B 20100329 CC40857143
0 1 BXP_1_1 RUS steady 16 off KRC 118 59/1 R2B 20100331 CC40865276
0 1 BXP_2_1 RUS steady 16 off KRC 118 59/1 R2B 20100329 CC40857167
----------------------------------------------------------------------------------------------------------------------------
Synchronization
How to verify the sync
>get sync
DFWe0600037> get sync

100727-15:09:42 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

=================================================================================================================
39 TransportNetwork=1,Synchronization=1
=================================================================================================================
SynchronizationId 1
degradationIsFault 0 (DEGR_NOT_FAULT)
nodeSystemClock 2 (LOCKED_MODE)
syncRefActivity i[8] = 2 1 1 1 1 1 1 1
syncRefPriority i[8] = 1 0 0 0 0 0 0 0
syncRefStatus i[8] = 3 0 0 0 0 0 0 0
syncReference [8] =
>>> syncReference = Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1,TuSyncRef=1
>>> syncReference =
>>> syncReference =
>>> syncReference =
>>> syncReference =
>>> syncReference =
>>> syncReference =
>>> syncReference =
userLabel
=================================================================================================================
95 Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1,TuSyncRef=1
=================================================================================================================
TuSyncRefId 1
administrativeState 1 (UNLOCKED)
availabilityStatus 0 (NO_STATUS)
operationalState 1 (ENABLED)
reservedBy [1] =
>>> reservedBy = TransportNetwork=1,Synchronization=1
userLabel
=================================================================================================================
Total: 2 MOs
To verify status of sync device
DFWe0600037> st sync 0 UNKNOWN_MODE
100727-15:10:29 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164
================================================================== 1
================= STARTUP_MODE
Proxy Adm State Op. State MO The system clock is starting up.
==================================================================
================= 2
95 1 (UNLOCKED) 1 (ENABLED) LOCKED_MODE
Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1,TuSyncRef=1 The system clock signal on the Timing Unit is locked: a
================================================================== synchronization reference is used to generate the system clock,
================= the clock accuracy is 50 ppb or better.
Total: 1 MOs

3
HOLD_OVER_MODE

To Verify handling of sync The system clock signal on the Timing Unit has holdover quality: no
synchronization reference is used to generate the system clock,
the clock accuracy is 50 ppb or better.
DFWe0600531> get . clock

100804-09:44:51 10.26.66.110 8.0d ERBS_NODE_MODEL_A_9_2

stopfile=/tmp/11419 4
================================================================== FREE_RUNNING_MODE
============== ================================= The system clock signal on the Timing Unit is free-running: no
MO Attribute Value synchronization reference is used to generate the system clock,
================================================================== the clock accuracy is 4.6 ppm or better.
============== =================================
Synchronization=1 nodeSystemClock 2 (LOC KED_MODE)
Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1 tuSystemClock 2 (LOC
KED_MODE)
================================================================== 5
============== ================================= FAILED_MODE
The system clock signal on the Timing Unit is failed: there is fault in
generating the system clock, no guarantee of clock accuracy
level.

6
LOSS_OF_TRACKING_MODE
The frequency of the system clock is at its upper or lower limit.

7
NOT_APPLICABLE
The system clock signal on Timing Unit is not applicable: the TUB or
the CBU is not present.
Alarm
How to check cell alarm
DFWe0600037> alt

100727-15:13:11 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

Connecting to 10.26.4.174:56834 (CorbaSecurity=OFF, corba_class=2, java=1.6.0_13, jacoms=R71CD02, jacorb=R71AN04)
Trying file=/var/opt/ericsson/amos/moshell_logfiles/edonngu/logs_moshell/tempfiles/20100727-131859_18123/ior18123
Resolving the alarm service in OMS...
Simple Alarm Client initialized...
Starting to retrieve active alarms
Nr of active alarms are: 4
================================================================================================
Date & Time (Local) S Specific Problem Cause Mo-Reference
================================================================================================
2010-07-10 09:43:51 M TemperatureSensorFailure equipment_malfunction BatteryBackup=1
2010-07-10 09:43:51 M BatteryMissing configuration_or_customizing_error BatteryBackup=1
2010-07-10 09:44:41 C License Key File Fault configuration_or_customizing_error Licensing=1
2010-07-27 15:06:55 M Upgrade Package Corrupt file_error UpgradePackage=R20BT
>>> Total: 4 Alarms (1 Critical, 3 Major)

How to check more detail on each alarm

DFWe0600037> ala

100727-16:30:22 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

Connecting to 10.26.4.174:56834 (CorbaSecurity=OFF, corba_class=2, java=1.6.0_13, jacoms=R71CD02, jacorb=R71AN04)
Trying file=/var/opt/ericsson/amos/moshell_logfiles/edonngu/logs_moshell/tempfiles/20100727-131859_18123/ior18123
Resolving the alarm service in OMS...
Simple Alarm Client initialized...
Starting to retrieve active alarms
Nr of active alarms are: 4
================================================================================================
Sever Specific Problem Cause Mo-Reference
================================================================================================
Crit License Key File Fault configuration_or_customizing_error Licensing=1
Maj BatteryMissing configuration_or_customizing_error BatteryBackup=1
Maj TemperatureSensorFailure equipment_malfunction BatteryBackup=1
Maj Upgrade Package Corrupt file_error UpgradePackage=R20BT

Alarm Id : SubNetwork=ONRM_ROOT_MO_R,SubNetwork=DFW-ENB,MeContext=DFWe0600037_5
Event Time : Jul 10, 2010 9:44:41 AM
Perceived Severity : Critical
Managed Object Class : Licensing
Managed Object Instance : SubNetwork=ONRM_ROOT_MO_R,SubNetwork=DFW-
ENB,MeContext=DFWe0600037,ManagedElement=1,SystemFunctions=1,Licensing=1
Specific Problem : License Key File Fault
Probable Cause : configuration_or_customizing_error
Additional Text : No license key file installed
Acknowledged by :
Acknowledgement Time : 0
Acknowledgement State: 2
System DN : SubNetwork=ONRM_ROOT_MO_R,SubNetwork=DFW-ENB,MeContext=DFWe0600037
Notification Id : 7
Additional Info :
How to check cell alarm log
>lga or lga –xxd (number of days)
DFWe0600531> lga -2d

100804-09:59:24 10.26.66.110 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/11419

Trying password from ipdatabase file: /opt/ericsson/amos/moshell/sitefiles/ipdatabase...
Startdate=19661031.081320, Enddate=20100805.145924
........Get /c/logfiles/alarm_event/ALARM_LOG.xml /var/opt/ericsson/amos/moshell_logfiles/edonngu/logs_moshell/tempfiles/20100803-162851_11377/alarmLog11419.xml ... OK
====================================================================================================================
Timestamp (UTC) S Problem Cause MO-reference
====================================================================================================================
2010-03-28 21:49:57 AL m Password File Fault configuration_or_customizing_error Security=1
2010-03-28 21:50:00 AL C License Key File Fault configuration_or_customizing_error Licensing=1
2010-04-29 14:49:00 AL * License Key File Fault configuration_or_customizing_error Licensing=1
2010-04-29 14:49:36 AL m Password File Fault configuration_or_customizing_error Security=1
2010-04-29 14:49:40 AL C License Key File Fault configuration_or_customizing_error Licensing=1
2010-04-29 14:52:46 AL M Invalid Ethernet Optical Module replaceable_unit_type_mismatch Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1
2010-04-29 14:52:52 AL * Invalid Ethernet Optical Module replaceable_unit_type_mismatch Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1
2010-04-29 14:52:52 AL M Gigabit Ethernet Link Fault loss_of_signal Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1
2010-04-29 14:52:54 AL * Gigabit Ethernet Link Fault loss_of_signal Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1
2010-04-29 14:53:16 AL m Password File Fault configuration_or_customizing_error Security=1
2010-04-29 14:53:16 AL C License Key File Fault configuration_or_customizing_error Licensing=1
2010-04-29 19:54:32 AL M EnclosureProductDataMismatch configuration_or_customizing_error Cabinet=1
2010-04-29 19:54:53 AL * License Key File Fault configuration_or_customizing_error Licensing=1
2010-04-29 19:54:57 AL M LossOfMains commerical_power_failure HwUnit=PSU-1
2010-04-29 19:55:02 AL M TemperatureSensorFailure equipment_malfunction BatteryBackup=1
2010-04-29 19:55:02 AL M CircuitBreakerTripped fuse_failure HwUnit=BFU-1
2010-04-29 19:55:03 AL * CircuitBreakerTripped fuse_failure HwUnit=BFU-1
2010-04-29 19:55:03 AL M BatteryMissing configuration_or_customizing_error BatteryBackup=1
2010-04-29 19:55:05 AL M Disconnected equipment_malfunction HwUnit=PSU-3
2010-04-29 19:55:06 AL M Disconnected equipment_malfunction HwUnit=PDU-2
2010-04-29 19:55:06 AL M Disconnected equipment_malfunction HwUnit=SAU
2010-04-29 19:57:45 AL M LinkFailure link_failure Subrack=1,Slot=1,PlugInUnit=1,RiPort=A
How to check cell alarm log
>lgae or lgae –xxd (number of days)
RNING - During reconfiguration of programs, no SwAllocation found for PlugInUnit: SubNetwork=ONRM_ROOT_MO_R,SubNetwork=DFW-
ENB,MeContext=DFWe0600037,ManagedElement=1,Equipment=1,HwUnit=PSU-1. =. =
2010-06-09 19:04:28 EV UpgradePackage=CXP102051/1_R20GY UpgradePackage Warning: Unexpected condition detected.
currentStepLabel=HardINITIATE. TimeStamp=Date: 2010-06-09, Time: 19:04:28.580. Version=SU_SW: DeltaUPs - R71CD04. Slogan=WARNING - During
reconfiguration of programs, no SwAllocation found for PlugInUnit: SubNetwork=ONRM_ROOT_MO_R,SubNetwork=DFW-
ENB,MeContext=DFWe0600037,ManagedElement=1,Equipment=1,HwUnit=PSU-2. =. =
2010-06-09 19:04:30 EV UpgradePackage=CXP102051/1_R20GY UpgradePackage Warning: Unexpected condition detected.
currentStepLabel=HardINITIATE. TimeStamp=Date: 2010-06-09, Time: 19:04:30.707. Version=SU_SW: DeltaUPs - R71CD04. Slogan=WARNING - During
reconfiguration of programs, no SwAllocation found for PlugInUnit: SubNetwork=ONRM_ROOT_MO_R,SubNetwork=DFW-
ENB,MeContext=DFWe0600037,ManagedElement=1,Equipment=1,HwUnit=PDU-1. =. =
2010-06-09 19:04:32 EV UpgradePackage=CXP102051/1_R20GY UpgradePackage Warning: Unexpected condition detected.
currentStepLabel=HardINITIATE. TimeStamp=Date: 2010-06-09, Time: 19:04:32.915. Version=SU_SW: DeltaUPs - R71CD04. Slogan=WARNING - During
reconfiguration of programs, no SwAllocation found for PlugInUnit: SubNetwork=ONRM_ROOT_MO_R,SubNetwork=DFW-
ENB,MeContext=DFWe0600037,ManagedElement=1,Equipment=1,HwUnit=BFU-1. =. =
2010-06-09 19:04:34 EV UpgradePackage=CXP102051/1_R20GY UpgradePackage Warning: Unexpected condition detected.
currentStepLabel=HardINITIATE. TimeStamp=Date: 2010-06-09, Time: 19:04:34.779. Version=SU_SW: DeltaUPs - R71CD04. Slogan=WARNING - During
reconfiguration of programs, no SwAllocation found for PlugInUnit: SubNetwork=ONRM_ROOT_MO_R,SubNetwork=DFW-
ENB,MeContext=DFWe0600037,ManagedElement=1,Equipment=1,HwUnit=SCU. =. =
2010-06-24 18:19:28 EV Synchronization=1 NssSynchronization_SystemClockStatusChanged
2010-06-24 18:19:41 EV Synchronization=1 NssSynchronization_SynchRefChanged
2010-06-24 18:19:41 EV Synchronization=1 NssSynchronization_SystemClockStatusChanged
2010-07-19 22:56:11 EV Synchronization=1 NssSynchronization_SystemClockStatusChanged
2010-07-19 22:56:22 EV Synchronization=1 NssSynchronization_SynchRefChanged
2010-07-19 22:56:22 EV Synchronization=1 NssSynchronization_SystemClockStatusChanged
2010-07-20 19:31:35 EV Synchronization=1 NssSynchronization_SystemClockStatusChanged
2010-07-20 19:31:46 EV Synchronization=1 NssSynchronization_SynchRefChanged
2010-07-20 19:31:46 EV Synchronization=1 NssSynchronization_SystemClockStatusChanged
2010-07-22 23:46:42 EV Synchronization=1 NssSynchronization_SystemClockStatusChanged
2010-07-22 23:46:53 EV Synchronization=1 NssSynchronization_SynchRefChanged
2010-07-22 23:46:53 EV Synchronization=1 NssSynchronization_SystemClockStatusChanged
eNB Power Setting, PCI, and
Miscellaneous
How to check eNB power seting
DFWe0600037> get . power

100727-15:29:48 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

=================================================================================================================
MO Attribute Value
=================================================================================================================
Licensing=1,CapacityLicenses=1,CapacityOutputPower=60Watt CapacityOutputPowerId 60Watt
Licensing=1,CapacityLicenses=1,CapacityOutputPower=60Watt capacityUnitOutputPower Number of 60 Watt Licenses
Licensing=1,CapacityLicenses=1,CapacityOutputPower=60Watt keyIdOutputPower CXC4010626
Licensing=1,CapacityLicenses=1,CapacityOutputPower=60Watt licenseCapacityOutputPower 0
Licensing=1,CapacityLicenses=1,CapacityOutputPower=60Watt licenseStateOutputPower 0 (DISABLED)
Licensing=1,CapacityLicenses=1,CapacityOutputPower=40Watt CapacityOutputPowerId 40Watt
Licensing=1,CapacityLicenses=1,CapacityOutputPower=40Watt capacityUnitOutputPower Number of 40 Watt Licenses
Licensing=1,CapacityLicenses=1,CapacityOutputPower=40Watt keyIdOutputPower CXC4010625
Licensing=1,CapacityLicenses=1,CapacityOutputPower=40Watt licenseCapacityOutputPower 0
Licensing=1,CapacityLicenses=1,CapacityOutputPower=40Watt licenseStateOutputPower 0 (DISABLED)
SubrackProdType=ROJ999999_* maxPowerDissipation 2000
EUtranCellFDD=DFWe06000372 maximumTransmissionPower 406
EUtranCellFDD=DFWe06000372 partOfRadioPower 100
EUtranCellFDD=DFWe06000373 maximumTransmissionPower 406
EUtranCellFDD=DFWe06000373 partOfRadioPower 100
EUtranCellFDD=DFWe06000371 maximumTransmissionPower 406
EUtranCellFDD=DFWe06000371 partOfRadioPower 100
SectorEquipmentFunction=S1 confOutputPower 20
SectorEquipmentFunction=S2 confOutputPower 20
PowerSupply=1 PowerSupplyId 1
PowerDistribution=1 PowerDistributionId 1
SectorEquipmentFunction=S3 confOutputPower 20
=================================================================================================================
Total: 11 MOs

These are 3 key eNB power parameters

– partOfRadioPower
– confOutputPower
– maximumTransmissionPower
Detail on eNB power seting

Power per Radio Unit [W]:

H/W Capability
– Power capability limited by the RU hardware.

License Power Available

– Power capability as limited by power license management.

partOfRadioPower= 100 {0..100}

– Specifies fraction of power for LTE in case of shared RU.

confOutputPower= 20 {20, 40, 60, 80, 120} [W]

– Used to restrict power in the sector
How to change power setting
Example: change power on confoutputpower

DFWe0600037> set SectorEquipmentFunction=S1 confoutputpower 40

100727-15:32:56 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2

stopfile=/tmp/18164
Set confoutputpower on following MOs ?
======================================================
=============================
938 SectorEquipmentFunction=S1
======================================================
=============================
Are you Sure [y/n] ?
y
How to lock and un-lock cell
DFWe0600037> bl cellfdd

100727-16:43:42 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

Block following MOs ?
===================================================================================
628 ENodeBFunction=1,EUtranCellFDD=DFWe06000372
842 ENodeBFunction=1,EUtranCellFDD=DFWe06000373
889 ENodeBFunction=1,EUtranCellFDD=DFWe06000371
===================================================================================
Are you Sure [y/n] ? Y

DFWe0600037> deb cellfdd

100727-16:45:02 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

Deblock following MOs ?
===================================================================================
628 ENodeBFunction=1,EUtranCellFDD=DFWe06000372
842 ENodeBFunction=1,EUtranCellFDD=DFWe06000373
889 ENodeBFunction=1,EUtranCellFDD=DFWe06000371
===================================================================================
Are you Sure [y/n] ?
How to check Physical-layer Cell Identity (PCI)
DFWe0600037> get utrancellfdd=dfwe0600037 cellid

100727-16:52:40 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

===============================================================================================
==================
MO Attribute Value
===============================================================================================
==================
EUtranCellFDD=DFWe06000372 cellId 2
EUtranCellFDD=DFWe06000372 physicalLayerCellIdGroup 145
EUtranCellFDD=DFWe06000372 physicalLayerSubCellId 2
EUtranCellFDD=DFWe06000373 cellId 3
EUtranCellFDD=DFWe06000373 physicalLayerCellIdGroup 148
EUtranCellFDD=DFWe06000373 physicalLayerSubCellId 1
EUtranCellFDD=DFWe06000371 cellId 1
EUtranCellFDD=DFWe06000371 physicalLayerCellIdGroup 143
EUtranCellFDD=DFWe06000371 physicalLayerSubCellId 0
===============================================================================================
==================
Total: 3 MOs

PCI sector 2 = 145*3 + 2 = 437. This is PCI UE detect and collection tool reports
Physical-layer Cell Identity (PCI)

• PSS signal: 3 different sequences called Physical-Layer Identities

(0-2)
• SSS signal: 168 different sequences called Physical-Layer Cell-
Identity groups (0-167)
• Because of 168 Physical-Layer Cell-Identity groups with 3
Physical-Layer, we will have 504 PCIs
168 × 3 = 504 Physical-Layer Cell Identities
• For each cell, PCIi = 3Sj + Pk
(Where i = 0 … 503; Group j = 0 … 167; ID k = 0 … 2)
How to check eNB parameters
You need to dump the kget file from eNB
1. > l+ filenam
2. > kget all
3. >l-
Kget file will be stored in the location of current directory.

Compare two eNB parameters

1. Take kget dump from eNB1, call it “kget_eNB1.log”
2. Moshell into eNB2
3. Do: diff . Kget_eNB1.log
How to Verify timer from active to idle
DFWe0600037> get . tinactivity

100727-15:22:46 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

==========================================================================================
=======================
MO Attribute Value
==========================================================================================
=======================
Rcs=1 tInactivityTimer 10
==========================================================================================
=======================
Total: 1 MOs
DFWe0600037> set rcs=1 tinactivitytimer 60

100727-15:34:28 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

Set tinactivitytimer on following MOs ?
===================================================================================
935 ENodeBFunction=1,Rcs=1
===================================================================================
Are you Sure [y/n] ?
y
How to check numbers of active UE (not IMSI) only
MME can look up IMSI
DFWe0600037> ue print -ue -allcell

100727-15:17:22 10.26.4.174 8.0d ERBS_NODE_MODEL_A_9_2 stopfile=/tmp/18164

$ ue print -ue -allcell
CellId RacUeRef BbUeRef {traceRef,interfaces,traceDepth,ipAddress}
TypeOfActiveTrace SetByColi
$