Poipet

!
configuration saved at 14:39:05 Thu May 2 2019 by write zdb

!configuration saved at 14:59:57 Mon Apr 29 2019 by write txt
!last configuration change at 14:38:33 Thu May 2 2019 by NULL
!</mim>
!<pm_card>
insert card MPU-1/3/0 601 3 100/100
insert card FCP-1/9/0 5147 0 100/100
insert card PWR-1/10/0 606 0 100/100
insert card PWR-1/11/0 606 0 100/100
insert card PFU-1/2/0 627 8 100/100
insert card PFU-1/5/0 611 2 100/100
insert card PFU-1/6/0 611 2 100/100
insert card MPU-1/4/0 601 3 100/100
set port extimer-1/3/0/1 MPU-1/3/0 5
set port gps-1/3/0/2 MPU-1/3/0 1
set port qx-1/3/0/4 MPU-1/3/0 0
set port mgmt_eth-1/3/0/5 MPU-1/3/0 0
set port gei-1/2/0/8 PFU-1/2/0 87
set port gei-1/2/0/1 PFU-1/2/0 87
set port gei-1/2/0/2 PFU-1/2/0 87
set port gei-1/2/0/3 PFU-1/2/0 87
set port gei-1/2/0/4 PFU-1/2/0 87
set port gei-1/2/0/5 PFU-1/2/0 87
set port gei-1/2/0/6 PFU-1/2/0 87
set port gei-1/2/0/7 PFU-1/2/0 87
set port xgei-1/5/0/1 PFU-1/5/0 113
set port extimer-1/4/0/1 MPU-1/4/0 5
set port qx-1/4/0/4 MPU-1/4/0 0
!</pm_card>
!<pm_sys>
hostname PR1_KPT2_6150_01
load-mode txt
nvram imgfile-location local
nvram mng-ip-address 192.192.192.11 255.255.255.0
nvram boot-server 192.192.192.100
nvram boot-password ******
nvram default-gateway 192.192.192.100
nvram boot-username zxr10
nvram ftp-path /sysdisk0/setup/0/OS/1.0/61/0
!</pm_sys>
!<vrf>
ip vrf zOAM
rd 65503:1
mpls label mode per-vrf
address-family ipv4
route-target import 65503:1
route-target export 65503:1
$
$
ip vrf z2G
rd 65503:2
address-family ipv4
$
$
ip vrf z3G
rd 65503:3
address-family ipv4
$
$
ip vrf zLTE
rd 65503:4
address-family ipv4
$
$
ip vrf nOAM
rd 65503:5
address-family ipv4
$
$
ip vrf n2G
rd 65503:6
address-family ipv4
$
$
ip vrf n3G
rd 65503:7
address-family ipv4
$
$
!</vrf>
!<if-intf>
interface gei-1/2/0/1
description To_PR1_KPT2_BBU
$
interface gei-1/2/0/1.1002
description KBAL_SPEAN_POIPET2_z2G
ip vrf forwarding z2G
ip address 10.84.46.65 255.255.255.252
$
description KBAL_SPEAN_POIPET2_z3G
ip vrf forwarding z3G
ip address 10.84.174.65 255.255.255.252
$
description KBAL_SPEAN_POIPET2_zLTE_S1C
ip vrf forwarding zLTE
ip address 10.85.78.65 255.255.255.252
$
description KBAL_SPEAN_POIPET2_zOAM
ip vrf forwarding zOAM
ip address 10.86.46.65 255.255.255.252
$
description KBAL_SPEAN_POIPET2_LTE_S1U
ip vrf forwarding zLTE
ip address 10.85.110.65 255.255.255.252
$
shutdown
$
shutdown
$
shutdown
$
shutdown
$
shutdown
$
shutdown
$
shutdown
$
interface xgei-1/5/0/1
description To_PR1_KPPT_6150-01
mtu 9212
ip address 10.11.225.7 255.255.255.254
interface mac-address offset 1
$
shutdown
$
description To-PR1_PSKA-6150_01
mtu 9212
ip address 10.11.225.8 255.255.255.254
$
shutdown
$
interface mgmt_eth
ip address 192.192.192.11 255.255.255.0
$
interface loopback0
description Router-ID
ip address 10.11.229.105 255.255.255.255
$
interface loopback1
description OAM_EMS
ip vrf forwarding zOAM
ip address 10.11.229.105 255.255.255.255
$
interface loopback1023
$
interface null1
$
interface te_tunnel101
description To_PR1_POPt_9K2E-01
$
interface dcn_pos2
$
interface dcn_pos3
$
interface dcn_pos4
$
interface dcn_pos5
$
interface dcn_pos6
$
interface dcn_pos7
$
interface dcn_pos8
$
interface dcn_pos9
$
interface dcn_pos10
$
interface dcn_pos11
$
interface dcn_pos12
$
interface dcn_pos13
$
interface dcn_mcc65
$
interface dcn_mcc66
$
interface te_tunnel101
ip unnumbered loopback0
$
!</if-intf>
!<pm_rm>
holdtime 0
pemode media_fiber
jumbo support jumbo-size 9216
$
holdtime 0
pemode media_fiber
$
holdtime 0
pemode media_fiber
$
holdtime 0
pemode media_fiber
$
holdtime 0
negotiation force speed speed-100M duplex duplex-full
pemode media_copper
mdimode mdimode-auto
master-slave auto-negotiation
$
holdtime 0
pemode media_copper
$
holdtime 0
pemode media_copper
$
holdtime 0
pemode media_copper
$
holdtime 0
negotiation force speed speed-10G duplex duplex-full
pemode media_fiber
lanwan lan
rf2sf enable
link-delay-up millisecond 300000
$
holdtime 0
pemode media_fiber
lanwan lan
rf2sf enable
$
holdtime 0
pemode media_fiber
lanwan lan
rf2sf enable
link-delay-up millisecond 300000
$
holdtime 0
pemode media_fiber
lanwan lan
rf2sf enable
$
!</pm_rm>
!<pm_if_mainten>
gps-attribute
gps 1ppsout gps-1/3/0/2 1
gps direction gps-1/3/0/2 1
gps inputoffset gps-1/3/0/2 0
gps outputoffset gps-1/3/0/2 0
gps portenable gps-1/3/0/2 0
gps protocol gps-1/3/0/2 1
gps speed gps-1/3/0/2 2
gps statusflag gps-1/3/0/2 2
gps timerelation gps-1/3/0/2 0
gps tod gps-1/3/0/2 0
gps istodmonitorptp disable
$
!</pm_if_mainten>
!<clock-mgr>
clock timezone Asia/Phnom_Penh 7
!</clock-mgr>
!<switchvlan>
switchvlan-configuration
switchport qinq tpid external 0x8100
$
$
$
$
$
$
$
$
$
$
$
$
vlan 1
$
$
!</switchvlan>
!<vlan>
vlan-configuration
encapsulation-dot1q 1002
$
$
$
$
$
$
!</vlan>
!<label-mgr>
mpls label range global 16 1048575 static 16 205823 ldp 205824 209919 pwe3 209920
218111 rsvp 218112 226303 bgp 22
6304 6
22591 bgpv6 622592 720895 ac-label 1000000 1048575
!</label-mgr>
!<system-user>
enable secret level 3 ****** RcMLuUKvnFZX9kNAV6A/UA==
system-user
authorization-template 1
bind aaa-authorization-template 1
local-privilege-level 2
login-sametime-max 60
$
authentication-template 1
bind aaa-authentication-template 1
$
user-default
enable-type local
$
user-name Buntha
bind authentication-template 1
bind authorization-template 1
password encrypted
a244c16ac1ed58d5e1c631968336e36e3f2b123d675fdc9e4493f48e37fd7162
$
user-name Ckosal
password encrypted
10cecd406e69fd920d4cf4376c3d01bfc65f2dcaf2db006296491fb966b9d3ab
$
user-name Khemara
password encrypted
425fd06359b4608e6ec369b11e431fbf91cc52ff220741669cd696d1e6f92fa8
$
user-name Nisaiy
password encrypted
434c4a28919ed7834950570a20b051a177196b34300e1df7a59ed2221d6c953b
$
user-name Roth
password encrypted
6b2309909588742808d75e249279e91103d4f2c71454d035fde51ebc85e297b4
$
user-name Sokha
password encrypted
dabbe405158ad6f96318589fa17d8526338beba1a46ec3caee91399f83d25312
$
user-name Vutha
password encrypted
7edf02f05cd8a788f7cb5793cd2ca39c83d2083cc71f3f3f4e5cf7cc38a6d86d
$
user-name cellcard
password encrypted
555004b3f35261a7133e878f0834045ebac5100884e6c0d02fd88420f42fd758
$
user-name ckheang
password encrypted
22821c77d9c75057a45f0cb5062ec731537250b37ab0b176ee151b55d8951977
$
user-name kakada
password encrypted
1a14d110cfda33595863226507ade5e3d97ea75a65d4497c8746cda9b1af2f3d
$
user-name pirom
password encrypted
cc506aea3d14c4b16e4493c1cffc90f904e36a83bd4da1759ac8340f57d34f30
$
user-name piseth
password encrypted
c6c82783f5e308dfd0186eea881d9aeb8db07ca8692d5e70ea8e3849f7e18c22
$
user-name somnal
password encrypted
cede2781ff208c5e0a030bee8a245702cf15f7c28f6af7ca26a74f89a429affc
$
user-name sophea
password encrypted
a39bf715ce48d50fb9336e4ecb4f72c169d9880e2e51cc61527aeaffa17347c5
$
user-name tola
password encrypted
3bef6b2ac685f6948e554d545836df5906b41681bac419b3f91ab6b5e23e340f
$
user-name tsok
password encrypted
923bcc806e4d8f2b2fb6143ed424be7c26a08799714ddfd9ddd114e6869a8e45
$
user-name zte
password encrypted
37bb1735561e410d619c7642c9fceda6536b16f317c2953601c59c346a3de6a6
$
$
!</system-user>
!<ntp>
ntp enable
ntp server vrf zOAM 10.11.237.12 priority 1
ntp server vrf zOAM 10.11.237.13 priority 2
ntp source ipv4 10.11.229.105
!</ntp>
!<ptp>
ptp
free-mode
$
$
!</ptp>
!<ssmclock>
ssm
usessm
synchronization-clock line xgei-1/6/0/1
synchronization-clock line xgei-1/5/0/1
priority line xgei-1/6/0/1 11
priority line xgei-1/5/0/1 10
receive-quality line xgei-1/6/0/1 11
receive-quality line xgei-1/5/0/1 11
$
!</ssmclock>
!<aaa>
aaa-authentication-template 1
aaa-authentication-type local
$
aaa-authorization-template 1
aaa-authorization-type local
$
!</aaa>
!<arp>
arp
timeout 600
$
timeout 600
$
timeout 600
$
timeout 600
$
timeout 600
$
timeout 600
$
timeout 600
$
timeout 600
$
timeout 600
$
timeout 600
$
timeout 600
$
timeout 600
$
$
!</arp>
!<ssh>
ssh server enable
!</ssh>
!<oam_snetconf>
snetconf server enable
!</oam_snetconf>
!<oam_netconf>
line netconf absolute-timeout 0
netconf agent enable
!</oam_netconf>
!<ldp>
mpls ldp instance 1
access-fec ip-prefix for noldp
discovery hello holdtime 180
discovery targeted-hello holdtime 180
graceful-restart
graceful-restart timer max-recovery 300
graceful-restart timer neighbor-liveness 300
label-advertise disable
router-id loopback0
target-session 10.11.229.101
$
!</ldp>
!<mpls-te>
mpls traffic-eng
cspf delay link-up 30
cspf delay switch-over 30
router-id 10.11.229.105
reoptimize events link-up
reoptimize timers delay installation-delay-time 60
reoptimize timers frequency 3600
unactive timer 30
signalling graceful-restart
signalling hello graceful-restart timers recovery-time 300000
signalling hello graceful-restart timers restart-time 600000
signalling retransmit
signalling refresh reduction
tunnel te_tunnel101
tunnel destination ipv4 10.11.229.101
tunnel mpls traffic-eng auto-reoptimize main-lsp
tunnel mpls traffic-eng auto-reoptimize hsb-lsp
tunnel mpls traffic-eng bfd interval 100 min-rx 100 multiplier 3
tunnel mpls traffic-eng record-route
tunnel mpls traffic-eng path-option 1 dynamic
tunnel mpls traffic-eng hot-standby protect 1 dynamic
tunnel mpls traffic-eng reference hot-standby
$
interface loopback0
$
$
$
$
!</mpls-te>
!<oam>
privilege configure level 2 interface
privilege interface level 2 shutdown
privilege interface level 2 description
privilege interface level 2 ip
privilege interface level 2 ip address
privilege interface level 2 ip vrf
privilege interface level 2 ip vrf forwarding
privilege configure level 2 vlan-configuration
privilege vlan level 2 interface
privilege vlan level 2 encapsulation-dot1q
privilege configure level 2 mpls
privilege configure level 2 pw
privilege l2vpn level 2 access-point
privilege l2vpn level 2 access-params
privilege l2vpn level 2 access-params ethernet
privilege l2vpn level 2 pseudo-wire
privilege l2vpn level 2 neighbour
privilege l2vpn level 2 encapsulation
!</oam>
!<alarm>
alarm netconf-report informational
logging file default almlog
accept on
$
logging file default cmdlog
buffer 1000
$
logging file default srvlog
accept on
interval 10
$
logging file default netclog
accept on
$
logging snmp
accept on
match cmdlog
$
!</alarm>
!<bgp>
router bgp 65503
synchronization disable
bgp router-id 10.11.229.105
bgp graceful-restart
bgp graceful-restart restart-time 300
bgp graceful-restart stalepath-time 1500
maximum-paths 4
timers bgp 30 90
redistribute connected
neighbor SPE peer-group
neighbor SPE remote-as 65503
neighbor SPE activate disable
neighbor SPE update-source loopback1
neighbor 10.11.229.101 remote-as 65503
neighbor 10.11.229.101 peer-group SPE
neighbor 10.11.229.101 description To_PR1_P0PT_9K2E4_01-SPE
address-family link-state
$
address-family ipv4 mdt
$
address-family ipv4 vrf z2G
bgp frr
bgp frr wtr 5
$
address-family ipv4 vrf z3G
bgp frr
bgp frr wtr 5
$
address-family ipv4 vrf zLTE
bgp frr
bgp frr wtr 5
$
address-family ipv4 vrf zOAM
bgp frr
bgp frr wtr 5
$
address-family ipv4 vrf n2G
bgp frr
bgp frr wtr 5
$
address-family ipv4 vrf n3G
bgp frr
bgp frr wtr 5
$
address-family ipv4 vrf nOAM
bgp frr
bgp frr wtr 5
redistribute subscriber-host
$
address-family ipv4 multicast
$
address-family ipv4 flowspec
$
address-family l2vpn evpn
$
address-family l2vpn vpls
$
address-family vpnv4
neighbor SPE activate
neighbor SPE send-med
$
address-family vpnv4 mcast
$
address-family vpnv4 multicast
$
address-family vpnv4 flowspec
$
address-family ipv6
synchronization disable
$
address-family ipv6 multicast
$
address-family vpnv6
$
address-family vpnv6 mcast
$
address-family vpnv6 multicast
$
address-family route-target
$
$
!</bgp>
!<ospfv2>
router ospf 1
area 0.0.0.0
mpls traffic-eng
bfd interval 100 min-rx 100 multiplier 3
cost 1500
dead-interval 30
hello-interval 10
network point-to-point
$
interface loopback0
$
bfd interval 100 min-rx 100 multiplier 3
cost 1500
dead-interval 30
hello-interval 10
network point-to-point
$
$
grace-period 240
nsf
router-id 10.11.229.105
$
!</ospfv2>
!<static>
ip route 10.11.229.101 255.255.255.255 te_tunnel101 name TO-PR1-POPT_9K2E4_01
!</static>
!<qos>
cfg-ds-field default
cfg-ds-egress 802.1p<->phb PHB BE 0
cfg-ds-egress 802.1p<->phb PHB AF11 1
cfg-ds-egress 802.1p<->phb PHB CS6 6
cfg-ds-egress 802.1p<->phb PHB CS7 7
cfg-ds-egress 802.1p<->phb PHB EF 5
cfg-ds-egress exp<->phb PHB BE 0
cfg-ds-egress exp<->phb PHB AF11 1
cfg-ds-egress exp<->phb PHB CS6 6
cfg-ds-egress exp<->phb PHB CS7 7
cfg-ds-egress exp<->phb PHB EF 5
cfg-ds-egress dscp<->phb PHB BE 0
cfg-ds-egress dscp<->phb PHB AF11 10
cfg-ds-egress dscp<->phb PHB CS6 48
cfg-ds-egress dscp<->phb PHB CS7 56
cfg-ds-egress dscp<->phb PHB EF 46
cfg-ds-ingress 802.1p<->phb PHB BE 0
cfg-ds-ingress 802.1p<->phb PHB AF11 1
cfg-ds-ingress 802.1p<->phb PHB EF 5
cfg-ds-ingress 802.1p<->phb PHB CS6 6
cfg-ds-ingress 802.1p<->phb PHB CS7 7
cfg-ds-ingress exp<->phb PHB BE 0
cfg-ds-ingress exp<->phb PHB AF11 1
cfg-ds-ingress exp<->phb PHB EF 5
cfg-ds-ingress exp<->phb PHB CS6 6
cfg-ds-ingress exp<->phb PHB CS7 7
cfg-ds-ingress dscp<->phb PHB BE 0
cfg-ds-ingress dscp<->phb PHB AF11 8
cfg-ds-ingress dscp<->phb PHB EF 40
cfg-ds-ingress dscp<->phb PHB EF 46
cfg-ds-ingress dscp<->phb PHB CS6 48
cfg-ds-ingress dscp<->phb PHB CS7 56
$
cfg-unknown-unicast-rsp restr-time 10
!</qos>
!<pm_protect>
nsr service all
protocol_receive_rate 2000
set-protocol-pkt-shape pir 2000 pbs 500
ptp-time-check disable
ptp-frequency-check disable
set-ptp-freq-rec-para loop-close arith1 lock-thres 50 pdv-rep-min 5 pdv-rep-max 20
phase-cycle 10 ptp-direction fo
rward
!</pm_protect>
!<pm_mainten>
buffer disable
$
buffer disable
$
buffer disable
$
buffer disable
$
buffer disable
$
buffer disable
$
buffer disable
$
buffer disable
$
buffer disable
$
buffer disable
$
buffer disable
$
buffer disable
$
pmconfig
update alarmhearable no-ring
$
!</pm_mainten>
!<pm_shmc>
shmc MPU-1/3/0
$
shmc FCP-1/9/0
$
shmc PWR-1/10/0
$
shmc PWR-1/11/0
$
shmc PFU-1/2/0
$
shmc PFU-1/5/0
$
shmc PFU-1/6/0
$
shmc MPU-1/4/0
$
!</pm_shmc>
PR1_KPT2_6150_01#
OSPF 1 Router ID 10.11.229.105 enable

Domain ID type 0x5,value 0.0.0.1
Enabled for 12w4d,Debug on
Number of areas 1, Normal 1, Stub 0, NSSA 0
Number of interfaces 3
Number of neighbors 2
Number of adjacent neighbors 2
Number of virtual links 0
Total number of entries in LSDB 36
Number of ASEs in LSDB 0, Checksum Sum 0x00000000
Number of grace LSAs 0
Number of new LSAs received 154070
Number of self-originated LSAs 17117
Number of non self-originated LSAs 32
Hold time between consecutive SPF 1 secs
TTL security disabled

Poipet

Uploaded by

Copyright:

Available Formats

Poipet

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Poipet

Uploaded by

Copyright:

Available Formats

!

configuration saved at 14:39:05 Thu May 2 2019 by write zdb

OSPF 1 Router ID 10.11.229.105 enable

You might also like