Pyramid PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1280

The Pyramid Web Framework

Version 1.9.4

Chris McDonough

March 31, 2019


Contents

0.1 Front Matter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1


0.2 Tutorials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
0.3 Narrative Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327
0.4 API Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 719
0.5 p* Scripts Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 911
0.6 Change History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 919
0.7 Glossary and Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1235

Index 1253

i
ii
The Pyramid Web Framework, Version 1.9.4

0.1 Front Matter

0.1.1 Copyright, Trademarks, and Attributions

”The Pyramid Web Framework, Version 1.9.4”

by Chris McDonough

Copyright © 2008-2011, Agendaless Consulting.

ISBN-10: 0615445675

ISBN-13: 978-0615445670

First print publishing: February, 2011

All rights reserved. This material may be copied or distributed only subject to the terms and conditions set
forth in the Creative Commons Attribution-Noncommercial-Share Alike 3.0 United States License. You
must give the original author credit. You may not use this work for commercial purposes. If you alter,
transform, or build upon this work, you may distribute the resulting work only under the same or similar
license to this one.

While the Pyramid documentation is offered under the Creative Commons Attribution-
Nonconmmercial-Share Alike 3.0 United States License, the Pyramid software is offered under a less
restrictive (BSD-like) license .

All terms mentioned in this book that are known to be trademarks or service marks have been appropriately
capitalized. However, use of a term in this book should not be regarded as affecting the validity of any
trademark or service mark.

Every effort has been made to make this book as complete and as accurate as possible, but no warranty
or fitness is implied. The information provided is on an ”as-is” basis. The author and the publisher shall
have neither liability nor responsibility to any person or entity with respect to any loss or damages arising
from the information contained in this book. No patent liability is assumed with respect to the use of the
information contained herein.

0.1. Front Matter 1


The Pyramid Web Framework, Version 1.9.4

Attributions

Editor: Casey Duncan

Contributors: Ben Bangert, Blaise Laflamme, Rob Miller, Mike Orr, Carlos de la Guardia, Paul Everitt,
Tres Seaver, John Shipman, Marius Gedminas, Chris Rossi, Joachim Krebs, Xavier Spriet, Reed
O’Brien, William Chambers, Charlie Choiniere, Jamaludin Ahmad, Graham Higgins, Patricio Paez,
Michael Merickel, Eric Ongerth, Niall O’Higgins, Christoph Zwerschke, John Anderson, Atsushi
Odagiri, Kirk Strauser, JD Navarro, Joe Dallago, Savoir-Faire Linux, Łukasz Fidosz, Christopher
Lambacher, Claus Conrad, Chris Beelby, Phil Jenvey and a number of people with only pseudonyms
on GitHub.

Cover Designer: Hugues Laflamme of Kemeneur.

Used with permission:

The Request and Response Objects chapter is adapted, with permission, from documentation
originally written by Ian Bicking.

The Much Ado About Traversal chapter is adapted, with permission, from an article written
by Rob Miller.

The Logging is adapted, with permission, from the Pylons documentation logging chapter,
originally written by Phil Jenvey.

Print Production

The print version of this book was produced using the Sphinx documentation generation system and the
LaTeX typesetting system.

Contacting The Publisher

Please send documentation licensing inquiries, translation inquiries, and other business communications
to Agendaless Consulting. Please send software and other technical queries to the Pylons-devel mailing
list.

2 Contents
The Pyramid Web Framework, Version 1.9.4

HTML Version and Source Code

An HTML version of this book is freely available via https://docs.pylonsproject.org/projects/pyramid/en/


latest/

The source code for the examples used in this book are available within the Pyramid software distribution,
always available via https://github.com/Pylons/pyramid

0.1.2 Typographical Conventions

Introduction

This chapter describes typographical conventions used in the Pyramid documentation.

Glossary

A glossary defines terms used throughout the documentation. References to glossary terms appear as
follows.

request

Note it is hyperlinked, and when clicked it will take the user to the term in the Glossary and highlight the
term.

Links

Links are presented as follows, and may be clickable.

TryPyramid

See also:

See also Cross-references for other links within the documentation.

Topic

A topic is similar to a block quote with a title, or a self-contained section with no subsections. A topic
indicates a self-contained idea that is separate from the flow of the document. Topics may occur anywhere
a section or transition may occur.

0.1. Front Matter 3


The Pyramid Web Framework, Version 1.9.4

Topic Title

Subsequent indented lines comprise the body of the topic, and are interpreted as body elements.

Code

Code may be displayed in blocks or inline. Blocks of code may use syntax highlighting, line numbering,
and emphasis.

Syntax highlighting

XML:

<somesnippet>Some XML</somesnippet>

Unix shell commands are prefixed with a $ character. (See venv for the meaning of $VENV.)

$ $VENV/bin/pip install -e .

Windows commands are prefixed with a drive letter with an optional directory name. (See venv for the
meaning of %VENV%.)

c:\> %VENV%\Scripts\pserve development.ini

cfg:

[some-part]
# A random part in the buildout
recipe = collective.recipe.foo
option = value

ini:

4 Contents
The Pyramid Web Framework, Version 1.9.4

[nosetests]
match=^test
where=pyramid
nocapture=1

Interactive Python:

>>> class Foo:


... bar = 100
...
>>> f = Foo()
>>> f.bar
100
>>> f.bar / 0
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ZeroDivisionError: integer division or modulo by zero

Displaying long commands

When a command that should be typed on one line is too long to fit on the displayed width of a page, the
backslash character \ is used to indicate that the subsequent printed line should be part of the command:

$ $VENV/bin/py.test tutorial/tests.py --cov-report term-missing \


--cov=tutorial -q

Code block options

To emphasize lines, we give the appearance that a highlighting pen has been used on the code.

if "foo" == "bar":
# This is Python code
pass

A code block with line numbers.

0.1. Front Matter 5


The Pyramid Web Framework, Version 1.9.4

1 if "foo" == "bar":
2 # This is Python code
3 pass

Some code blocks may be given a caption.

Listing 1: sample.py

if "foo" == "bar":
# This is Python code
pass

Inline code

Inline code is displayed as follows, where the inline code is ’pip install -e ”.[docs]”’.

Install requirements for building documentation: pip install -e ".[docs]"

Feature versioning

We designate the version in which something is added, changed, or deprecated in the project.

Version added

The version in which a feature is added to a project is displayed as follows.

New in version 1.1: pyramid.paster.bootstrap()

Version changed

The version in which a feature is changed in a project is displayed as follows.

Changed in version 1.8: Added the ability for bootstrap to cleanup automatically via the with state-
ment.

6 Contents
The Pyramid Web Framework, Version 1.9.4

Deprecated

The version in which a feature is deprecated in a project is displayed as follows.

Deprecated since version 1.7: Use the require_csrf option or read Checking CSRF Tokens Automat-
ically instead to have pyramid.exceptions.BadCSRFToken exceptions raised.

Danger

Danger represents critical information related to a topic or concept, and should recommend to the user
”don’t do this dangerous thing”.

This is danger or an error.

Warnings

Warnings represent limitations and advice related to a topic or concept.

This is a warning.

Notes

Notes represent additional information related to a topic or concept.

This is a note.

0.1. Front Matter 7


The Pyramid Web Framework, Version 1.9.4

See also

”See also” messages refer to topics that are related to the current topic, but have a narrative tone to them
instead of merely a link without explanation. ”See also” is rendered in a block as well, so that it stands out
for the reader’s attention.

See also:

See Quick Tutorial section on Requirements.

Cross-references

Cross-references are links that may be to a document, arbitrary location, object, or other items.

Cross-referencing documents

Links to pages within this documentation display as follows.

Quick Tour of Pyramid

Cross-referencing arbitrary locations

Links to sections, and tables and figures with captions, within this documentation display as follows.

Internationalization and Localization

8 Contents
The Pyramid Web Framework, Version 1.9.4

Python modules, classes, methods, and functions

All of the following are clickable links to Python modules, classes, methods, and functions.

Python module names display as follows.

pyramid.config

Python class names display as follows.

pyramid.config.Configurator

Python method names display as follows.

pyramid.config.Configurator.add_view()

Python function names display as follows.

pyramid.renderers.render_to_response()

Sometimes we show only the last segment of a Python object’s name, which displays as follows.

render_to_response()

The application ”Pyramid” itself displays as follows.

Pyramid

0.1.3 Author Introduction

Welcome to ”The Pyramid Web Framework”. In this introduction, I’ll describe the audience for this book,
I’ll describe the book content, I’ll provide some context regarding the genesis of Pyramid, and I’ll thank
some important people.

I hope you enjoy both this book and the software it documents. I’ve had a blast writing both.

0.1. Front Matter 9


The Pyramid Web Framework, Version 1.9.4

Audience

This book is aimed primarily at a reader that has the following attributes:
• At least a moderate amount of Python experience.
• A familiarity with web protocols such as HTTP and CGI.
If you fit into both of these categories, you’re in the direct target audience for this book. But don’t worry,
even if you have no experience with Python or the web, both are easy to pick up ”on the fly”.
Python is an excellent language in which to write applications; becoming productive in Python is almost
mind-blowingly easy. If you already have experience in another language such as Java, Visual Basic, Perl,
Ruby, or even C/C++, learning Python will be a snap; it should take you no longer than a couple of days
to become modestly productive. If you don’t have previous programming experience, it will be slightly
harder, and it will take a little longer, but you’d be hard-pressed to find a better ”first language.”
Web technology familiarity is assumed in various places within the book. For example, the book doesn’t
try to define common web-related concepts like ”URL” or ”query string.” Likewise, the book describes
various interactions in terms of the HTTP protocol, but it does not describe how the HTTP protocol works
in detail. Like any good web framework, though, Pyramid shields you from needing to know most of the
gory details of web protocols and low-level data structures. As a result, you can usually avoid becoming
”blocked” while you read this book even if you don’t yet deeply understand web technologies.

Book Content

This book is divided into four major parts:


Tutorials
Each tutorial builds a sample application or implements a set of concepts with a sample; it then
describes the application or concepts in terms of the sample. You should read the tutorials if
you want a guided tour of Pyramid.
Narrative Documentation
This is documentation which describes Pyramid concepts in narrative form, written in a largely
conversational tone. Each narrative documentation chapter describes an isolated Pyramid con-
cept. You should be able to get useful information out of the narrative chapters if you read
them out-of-order, or when you need only a reminder about a particular topic while you’re
developing an application.
API Documentation
Comprehensive reference material for every public API exposed by Pyramid. The API docu-
mentation is organized alphabetically by module name.
p* Scripts Documentation
p* scripts included with Pyramid.

10 Contents
The Pyramid Web Framework, Version 1.9.4

The Genesis of repoze.bfg

Before the end of 2010, Pyramid was known as repoze.bfg.

I wrote repoze.bfg after many years of writing applications using Zope. Zope provided me with a lot of
mileage: it wasn’t until almost a decade of successfully creating applications using it that I decided to write
a different web framework. Although repoze.bfg takes inspiration from a variety of web frameworks,
it owes more of its core design to Zope than any other.

The Repoze ”brand” existed before repoze.bfg was created. One of the first packages developed as
part of the Repoze brand was a package named repoze.zope2. This was a package that allowed Zope
2 applications to run under a WSGI server without modification. Zope 2 did not have reasonable WSGI
support at the time.

During the development of the repoze.zope2 package, I found that replicating the Zope 2 ”publisher”
– the machinery that maps URLs to code – was time-consuming and fiddly. Zope 2 had evolved over many
years, and emulating all of its edge cases was extremely difficult. I finished the repoze.zope2 package,
and it emulates the normal Zope 2 publisher pretty well. But during its development, it became clear that
Zope 2 had simply begun to exceed my tolerance for complexity, and I began to look around for simpler
options.

I considered using the Zope 3 application server machinery, but it turned out that it had become more
indirect than the Zope 2 machinery it aimed to replace, which didn’t fulfill the goal of simplification. I
also considered using Django and Pylons, but neither of those frameworks offer much along the axes of
traversal, contextual declarative security, or application extensibility; these were features I had become
accustomed to as a Zope developer.

I decided that in the long term, creating a simpler framework that retained features I had become accus-
tomed to when developing Zope applications was a more reasonable idea than continuing to use any Zope
publisher or living with the limitations and unfamiliarities of a different framework. The result is what is
now Pyramid.

The Genesis of Pyramid

What was repoze.bfg has become Pyramid as the result of a coalition built between the Repoze and
Pylons community throughout the year 2010. By merging technology, we’re able to reduce duplication of
effort, and take advantage of more of each others’ technology.

0.1. Front Matter 11


The Pyramid Web Framework, Version 1.9.4

Thanks

This book is dedicated to my grandmother, who gave me my first typewriter (a Royal), and my mother,
who bought me my first computer (a VIC-20).

Thanks to the following people for providing expertise, resources, and software. Without the help of
these folks, neither this book nor the software which it details would exist: Paul Everitt, Tres Seaver, An-
drew Sawyers, Malthe Borch, Carlos de la Guardia, Chris Rossi, Shane Hathaway, Daniel Holth, Wichert
Akkerman, Georg Brandl, Blaise Laflamme, Ben Bangert, Casey Duncan, Hugues Laflamme, Mike Orr,
John Shipman, Chris Beelby, Patricio Paez, Simon Oram, Nat Hardwick, Ian Bicking, Jim Fulton, Michael
Merickel, Tom Moroz of the Open Society Institute, and Todd Koym of Environmental Health Sciences.

Thanks to Guido van Rossum and Tim Peters for Python.

Special thanks to Tricia for putting up with me.

0.1.4 Defending Pyramid’s Design

From time to time, challenges to various aspects of Pyramid design are lodged. To give context to discus-
sions that follow, we detail some of the design decisions and trade-offs here. In some cases, we acknowl-
edge that the framework can be made better and we describe future steps which will be taken to improve
it. In others we just file the challenge as noted, as obviously you can’t please everyone all of the time.

Pyramid Provides More Than One Way to Do It

A canon of Python popular culture is ”TIOOWTDI” (”there is only one way to do it”, a slighting, tongue-
in-cheek reference to Perl’s ”TIMTOWTDI”, which is an acronym for ”there is more than one way to do
it”).

Pyramid is, for better or worse, a ”TIMTOWTDI” system. For example, it includes more than one way to
resolve a URL to a view callable: via url dispatch or traversal. Multiple methods of configuration exist:
imperative configuration, configuration decoration, and ZCML (optionally via pyramid_zcml). It works
with multiple different kinds of persistence and templating systems. And so on. However, the existence
of most of these overlapping ways to do things are not without reason and purpose: we have a number of
audiences to serve, and we believe that TIMTOWTDI at the web framework level actually prevents a much
more insidious and harmful set of duplication at higher levels in the Python web community.

Pyramid began its life as repoze.bfg, written by a team of people with many years of prior Zope
experience. The idea of traversal and the way view lookup works was stolen entirely from Zope. The

12 Contents
The Pyramid Web Framework, Version 1.9.4

authorization subsystem provided by Pyramid is a derivative of Zope’s. The idea that an application can
be extended without forking is also a Zope derivative.
Implementations of these features were required to allow the Pyramid authors to build the bread-and-butter
CMS-type systems for customers in the way in which they were accustomed. No other system, save for
Zope itself, had such features, and Zope itself was beginning to show signs of its age. We were becoming
hampered by consequences of its early design mistakes. Zope’s lack of documentation was also difficult
to work around. It was hard to hire smart people to work on Zope applications because there was no
comprehensive documentation set which explained ”it all” in one consumable place, and it was too large
and self-inconsistent to document properly. Before repoze.bfg went under development, its authors
obviously looked around for other frameworks that fit the bill. But no non-Zope framework did. So we
embarked on building repoze.bfg.
As the result of our research, however, it became apparent that, despite the fact that no one framework had
all the features we required, lots of existing frameworks had good, and sometimes very compelling ideas.
In particular, URL dispatch is a more direct mechanism to map URLs to code.
So, although we couldn’t find a framework, save for Zope, that fit our needs, and while we incorporated a
lot of Zope ideas into BFG, we also emulated the features we found compelling in other frameworks (such
as url dispatch). After the initial public release of BFG, as time went on, features were added to support
people allergic to various Zope-isms in the system, such as the ability to configure the application using
imperative configuration and configuration decoration, rather than solely using ZCML, and the elimination
of the required use of interface objects. It soon became clear that we had a system that was very generic,
and was beginning to appeal to non-Zope users as well as ex-Zope users.
As the result of this generalization, it became obvious BFG shared 90% of its feature set with the feature
set of Pylons 1, and thus had a very similar target market. Because they were so similar, choosing between
the two systems was an exercise in frustration for an otherwise non-partisan developer. It was also strange
for the Pylons and BFG development communities to be in competition for the same set of users, given
how similar the two frameworks were. So the Pylons and BFG teams began to work together to form a
plan to merge. The features missing from BFG (notably view handler classes, flash messaging, and other
minor missing bits), were added to provide familiarity to ex-Pylons users. The result is Pyramid.
The Python web framework space is currently notoriously balkanized. We’re truly hoping that the amal-
gamation of components in Pyramid will appeal to at least two currently very distinct sets of users: Pylons
and BFG users. By unifying the best concepts from Pylons and BFG into a single codebase, and leaving
the bad concepts from their ancestors behind, we’ll be able to consolidate our efforts better, share more
code, and promote our efforts as a unit rather than competing pointlessly. We hope to be able to shortcut
the pack mentality which results in a much larger duplication of effort, represented by competing but in-
credibly similar applications and libraries, each built upon a specific low level stack that is incompatible
with the other. We’ll also shrink the choice of credible Python web frameworks down by at least one.
We’re also hoping to attract users from other communities (such as Zope’s and TurboGears’) by provid-
ing the features they require, while allowing enough flexibility to do things in a familiar fashion. Some
overlap of functionality to achieve these goals is expected and unavoidable, at least if we aim to prevent
pointless duplication at higher levels. If we’ve done our job well enough, the various audiences will be
able to coexist and cooperate rather than firing at each other across some imaginary web framework DMZ.

0.1. Front Matter 13


The Pyramid Web Framework, Version 1.9.4

Pyramid Uses a Zope Component Architecture (”ZCA”) Registry

Pyramid uses a Zope Component Architecture (ZCA) ”component registry” as its application registry
under the hood. This is a point of some contention. Pyramid is of a Zope pedigree, so it was natural for its
developers to use a ZCA registry at its inception. However, we understand that using a ZCA registry has
issues and consequences, which we’ve attempted to address as best we can. Here’s an introspection about
Pyramid use of a ZCA registry, and the trade-offs its usage involves.

Problems

The global API that may be used to access data in a ZCA component registry is not particularly pretty
or intuitive, and sometimes it’s just plain obtuse. Likewise, the conceptual load on a casual source code
reader of code that uses the ZCA global API is somewhat high. Consider a ZCA neophyte reading the
code that performs a typical ”unnamed utility” lookup using the zope.component.getUtility()
global API:

1 from pyramid.interfaces import ISettings


2 from zope.component import getUtility
3 settings = getUtility(ISettings)

After this code runs, settings will be a Python dictionary. But it’s unlikely that any civilian would
know that just by reading the code. There are a number of comprehension issues with the bit of code
above that are obvious.

First, what’s a ”utility”? Well, for the purposes of this discussion, and for the purpose of the code above,
it’s just not very important. If you really want to know, you can read this. However, still, readers of such
code need to understand the concept in order to parse it. This is problem number one.

Second, what’s this ISettings thing? It’s an interface. Is that important here? Not really, we’re just
using it as a key for some lookup based on its identity as a marker: it represents an object that has the
dictionary API, but that’s not very important in this context. That’s problem number two.

Third of all, what does the getUtility function do? It’s performing a lookup for the ISettings
”utility” that should return... well, a utility. Note how we’ve already built up a dependency on the under-
standing of an interface and the concept of ”utility” to answer this question: a bad sign so far. Note also
that the answer is circular, a really bad sign.

Fourth, where does getUtility look to get the data? Well, the ”component registry” of course. What’s
a component registry? Problem number four.

14 Contents
The Pyramid Web Framework, Version 1.9.4

Fifth, assuming you buy that there’s some magical registry hanging around, where is this registry? Homina
homina... ”around”? That’s sort of the best answer in this context (a more specific answer would require
knowledge of internals). Can there be more than one registry? Yes. So in which registry does it find the
registration? Well, the ”current” registry of course. In terms of Pyramid, the current registry is a thread
local variable. Using an API that consults a thread local makes understanding how it works non-local.
You’ve now bought in to the fact that there’s a registry that is just hanging around. But how does the
registry get populated? Why, via code that calls directives like config.add_view. In this particular
case, however, the registration of ISettings is made by the framework itself under the hood: it’s not
present in any user configuration. This is extremely hard to comprehend. Problem number six.
Clearly there’s some amount of cognitive load here that needs to be borne by a reader of code that extends
the Pyramid framework due to its use of the ZCA, even if they are already an expert Python programmer
and an expert in the domain of web applications. This is suboptimal.

Ameliorations

First, the primary amelioration: Pyramid does not expect application developers to understand ZCA con-
cepts or any of its APIs. If an application developer needs to understand a ZCA concept or API during the
creation of a Pyramid application, we’ve failed on some axis.
Instead the framework hides the presence of the ZCA registry behind special-purpose API functions that
do use ZCA APIs. Take for example the pyramid.security.authenticated_userid function,
which returns the userid present in the current request or None if no userid is present in the current request.
The application developer calls it like so:

1 from pyramid.security import authenticated_userid


2 userid = authenticated_userid(request)

They now have the current user id.


Under its hood however, the implementation of authenticated_userid is this:

1 def authenticated_userid(request):
2 """ Return the userid of the currently authenticated user or
3 ``None`` if there is no authentication policy in effect or there
4 is no currently authenticated user. """
5

6 registry = request.registry # the ZCA component registry


7 policy = registry.queryUtility(IAuthenticationPolicy)
8 if policy is None:
9 return None
10 return policy.authenticated_userid(request)

0.1. Front Matter 15


The Pyramid Web Framework, Version 1.9.4

Using such wrappers, we strive to always hide the ZCA API from application developers. Application
developers should just never know about the ZCA API; they should call a Python function with some
object germane to the domain as an argument, and it should return a result. A corollary that follows is that
any reader of an application that has been written using Pyramid needn’t understand the ZCA API either.

Hiding the ZCA API from application developers and code readers is a form of enhancing domain speci-
ficity. No application developer wants to need to understand the small, detailed mechanics of how a web
framework does its thing. People want to deal in concepts that are closer to the domain they’re working
in. For example, web developers want to know about users, not utilities. Pyramid uses the ZCA as an
implementation detail, not as a feature which is exposed to end users.

However, unlike application developers, framework developers, including people who want to override
Pyramid functionality via preordained framework plugpoints like traversal or view lookup, must under-
stand the ZCA registry API.

Pyramid framework developers were so concerned about conceptual load issues of the ZCA registry
API that a replacement registry implementation named repoze.component was actually developed.
Though this package has a registry implementation which is fully functional and well-tested, and its API
is much nicer than the ZCA registry API, work on it was largely abandoned, and it is not used in Pyramid.
We continued to use a ZCA registry within Pyramid because it ultimately proved a better fit.

We continued using ZCA registry rather than disusing it in favor of using the registry implementation
in repoze.component largely because the ZCA concept of interfaces provides for use of an interface
hierarchy, which is useful in a lot of scenarios (such as context type inheritance). Coming up with a
marker type that was something like an interface that allowed for this functionality seemed like it was just
reinventing the wheel.

Making framework developers and extenders understand the ZCA registry API is a trade-off. We (the
Pyramid developers) like the features that the ZCA registry gives us, and we have long-ago borne the
weight of understanding what it does and how it works. The authors of Pyramid understand the ZCA
deeply and can read code that uses it as easily as any other code.

But we recognize that developers who might want to extend the framework are not as comfortable with
the ZCA registry API as the original developers. So for the purpose of being kind to third-party Pyramid
framework developers, we’ve drawn some lines in the sand.

In all core code, we’ve made use of ZCA global API functions, such as zope.component.
getUtility and zope.component.getAdapter, the exception instead of the rule. So instead
of:

16 Contents
The Pyramid Web Framework, Version 1.9.4

1 from pyramid.interfaces import IAuthenticationPolicy


2 from zope.component import getUtility
3 policy = getUtility(IAuthenticationPolicy)

Pyramid code will usually do:

1 from pyramid.interfaces import IAuthenticationPolicy


2 from pyramid.threadlocal import get_current_registry
3 registry = get_current_registry()
4 policy = registry.getUtility(IAuthenticationPolicy)

While the latter is more verbose, it also arguably makes it more obvious what’s going on. All of the
Pyramid core code uses this pattern rather than the ZCA global API.

Rationale

Here are the main rationales involved in the Pyramid decision to use the ZCA registry:

• History. A nontrivial part of the answer to this question is ”history”. Much of the design of Pyramid
is stolen directly from Zope. Zope uses the ZCA registry to do a number of tricks. Pyramid mimics
these tricks, and, because the ZCA registry works well for that set of tricks, Pyramid uses it for the
same purposes. For example, the way that Pyramid maps a request to a view callable using traversal
is lifted almost entirely from Zope. The ZCA registry plays an important role in the particulars of
how this request to view mapping is done.

• Features. The ZCA component registry essentially provides what can be considered something like
a superdictionary, which allows for more complex lookups than retrieving a value based on a single
key. Some of this lookup capability is very useful for end users, such as being able to register a view
that is only found when the context is some class of object, or when the context implements some
interface.

• Singularity. There’s only one place where ”application configuration” lives in a Pyramid application:
in a component registry. The component registry answers questions made to it by the framework at
runtime based on the configuration of an application. Note: ”an application” is not the same as ”a
process”; multiple independently configured copies of the same Pyramid application are capable of
running in the same process space.

• Composability. A ZCA component registry can be populated imperatively, or there’s an existing


mechanism to populate a registry via the use of a configuration file (ZCML, via the optional pyra-
mid_zcml package). We didn’t need to write a frontend from scratch to make use of configuration-
file-driven registry population.

0.1. Front Matter 17


The Pyramid Web Framework, Version 1.9.4

• Pluggability. Use of the ZCA registry allows for framework extensibility via a well-defined and
widely understood plugin architecture. As long as framework developers and extenders understand
the ZCA registry, it’s possible to extend Pyramid almost arbitrarily. For example, it’s relatively
easy to build a directive that registers several views all at once, allowing app developers to use that
directive as a ”macro” in code that they write. This is somewhat of a differentiating feature from
other (non-Zope) frameworks.

• Testability. Judicious use of the ZCA registry in framework code makes testing that code slightly
easier. Instead of using monkeypatching or other facilities to register mock objects for testing, we
inject dependencies via ZCA registrations, then use lookups in the code to find our mock objects.

• Speed. The ZCA registry is very fast for a specific set of complex lookup scenarios that Pyramid
uses, having been optimized through the years for just these purposes. The ZCA registry contains
optional C code for this purpose which demonstrably has no (or very few) bugs.

• Ecosystem. Many existing Zope packages can be used in Pyramid with few (or no) changes due to
our use of the ZCA registry.

Conclusion

If you only develop applications using Pyramid, there’s not much to complain about here. You just should
never need to understand the ZCA registry API; use documented Pyramid APIs instead. However, you
may be an application developer who doesn’t read API documentation. Instead you read the raw source
code, and because you haven’t read the API documentation, you don’t know what functions, classes, and
methods even form the Pyramid API. As a result, you’ve now written code that uses internals, and you’ve
painted yourself into a conceptual corner, needing to wrestle with some ZCA-using implementation detail.
If this is you, it’s extremely hard to have a lot of sympathy for you. You’ll either need to get familiar with
how we’re using the ZCA registry or you’ll need to use only the documented APIs; that’s why we document
them as APIs.

If you extend or develop Pyramid (create new directives, use some of the more obscure hooks as described
in Using Hooks, or work on the Pyramid core code), you will be faced with needing to understand at least
some ZCA concepts. In some places it’s used unabashedly, and will be forever. We know it’s quirky, but
it’s also useful and fundamentally understandable if you take the time to do some reading about it.

Pyramid ”Encourages Use of ZCML”

ZCML is a configuration language that can be used to configure the Zope Component Architecture registry
that Pyramid uses for application configuration. Often people claim that Pyramid ”needs ZCML”.

It doesn’t. In Pyramid 1.0, ZCML doesn’t ship as part of the core; instead it ships in the pyramid_zcml
add-on package, which is completely optional. No ZCML is required at all to use Pyramid, nor any other
sort of frameworky declarative frontend to application configuration.

18 Contents
The Pyramid Web Framework, Version 1.9.4

Pyramid Does Traversal, and I Don’t Like Traversal

In Pyramid, traversal is the act of resolving a URL path to a resource object in a resource tree. Some
people are uncomfortable with this notion, and believe it is wrong. Thankfully if you use Pyramid and you
don’t want to model your application in terms of a resource tree, you needn’t use it at all. Instead use URL
dispatch to map URL paths to views.

The idea that some folks believe traversal is unilaterally wrong is understandable. The people who believe
it is wrong almost invariably have all of their data in a relational database. Relational databases aren’t
naturally hierarchical, so traversing one like a tree is not possible.

However, folks who deem traversal unilaterally wrong are neglecting to take into account that many per-
sistence mechanisms are hierarchical. Examples include a filesystem, an LDAP database, a ZODB (or
another type of graph) database, an XML document, and the Python module namespace. It is often conve-
nient to model the frontend to a hierarchical data store as a graph, using traversal to apply views to objects
that either are the resources in the tree being traversed (such as in the case of ZODB) or at least ones which
stand in for them (such as in the case of wrappers for files from the filesystem).

Also, many website structures are naturally hierarchical, even if the data which drives them isn’t. For
example, newspaper websites are often extremely hierarchical: sections within sections within sections,
ad infinitum. If you want your URLs to indicate this structure, and the structure is indefinite (the number
of nested sections can be ”N” instead of some fixed number), a resource tree is an excellent way to model
this, even if the backend is a relational database. In this situation, the resource tree is just a site structure.

Traversal also offers better composability of applications than URL dispatch, because it doesn’t rely on
a fixed ordering of URL matching. You can compose a set of disparate functionality (and add to it later)
around a mapping of view to resource more predictably than trying to get the right ordering of URL pattern
matching.

But the point is ultimately moot. If you don’t want to use traversal, you needn’t. Use URL dispatch instead.

Pyramid Does URL Dispatch, and I Don’t Like URL Dispatch

In Pyramid, url dispatch is the act of resolving a URL path to a view callable by performing pattern match-
ing against some set of ordered route definitions. The route definitions are examined in order: the first
pattern which matches is used to associate the URL with a view callable.

Some people are uncomfortable with this notion, and believe it is wrong. These are usually people who
are steeped deeply in Zope. Zope does not provide any mechanism except traversal to map code to URLs.
This is mainly because Zope effectively requires use of ZODB, which is a hierarchical object store. Zope
also supports relational databases, but typically the code that calls into the database lives somewhere in

0.1. Front Matter 19


The Pyramid Web Framework, Version 1.9.4

the ZODB object graph (or at least is a view related to a node in the object graph), and traversal is required
to reach this code.

I’ll argue that URL dispatch is ultimately useful, even if you want to use traversal as well. You
can actually combine URL dispatch and traversal in Pyramid (see Combining Traversal and URL
Dispatch). One example of such a usage: if you want to emulate something like Zope 2’s ”Zope
Management Interface” UI on top of your object graph (or any administrative interface), you can
register a route like config.add_route('manage', '/manage/*traverse') and then as-
sociate ”management” views in your code by using the route_name argument to a view con-
figuration, e.g., config.add_view('.some.callable', context=".some.Resource",
route_name='manage'). If you wire things up this way, someone then walks up to, for example,
/manage/ob1/ob2, they might be presented with a management interface, but walking up to /ob1/
ob2 would present them with the default object view. There are other tricks you can pull in these hybrid
configurations if you’re clever (and maybe masochistic) too.

Also, if you are a URL dispatch hater, if you should ever be asked to write an application that must use
some legacy relational database structure, you might find that using URL dispatch comes in handy for one-
off associations between views and URL paths. Sometimes it’s just pointless to add a node to the object
graph that effectively represents the entry point for some bit of code. You can just use a route and be done
with it. If a route matches, a view associated with the route will be called. If no route matches, Pyramid
falls back to using traversal.

But the point is ultimately moot. If you use Pyramid, and you really don’t want to use URL dispatch, you
needn’t use it at all. Instead, use traversal exclusively to map URL paths to views, just like you do in Zope.

Pyramid Views Do Not Accept Arbitrary Keyword Arguments

Many web frameworks (Zope, TurboGears, Pylons 1.X, Django) allow for their variant of a view callable
to accept arbitrary keyword or positional arguments, which are filled in using values present in the
request.POST, request.GET, or route match dictionaries. For example, a Django view will ac-
cept positional arguments which match information in an associated ”urlconf” such as r'^polls/(?
P<poll_id>\d+)/$:

1 def aview(request, poll_id):


2 return HttpResponse(poll_id)

Zope likewise allows you to add arbitrary keyword and positional arguments to any method of a resource
object found via traversal:

20 Contents
The Pyramid Web Framework, Version 1.9.4

1 from persistent import Persistent


2

3 class MyZopeObject(Persistent):
4 def aview(self, a, b, c=None):
5 return '%s %s %c' % (a, b, c)

When this method is called as the result of being the published callable, the Zope request object’s GET and
POST namespaces are searched for keys which match the names of the positional and keyword arguments
in the request, and the method is called (if possible) with its argument list filled with values mentioned
therein. TurboGears and Pylons 1.X operate similarly.

Out of the box, Pyramid is configured to have none of these features. By default Pyramid view callables
always accept only request and no other arguments. The rationale is, this argument specification match-
ing when done aggressively can be costly, and Pyramid has performance as one of its main goals. Therefore
we’ve decided to make people, by default, obtain information by interrogating the request object within
the view callable body instead of providing magic to do unpacking into the view argument list.

However, as of Pyramid 1.0a9, user code can influence the way view callables are expected to be called,
making it possible to compose a system out of view callables which are called with arbitrary arguments.
See Using a View Mapper.

Pyramid Provides Too Few ”Rails”

By design, Pyramid is not a particularly opinionated web framework. It has a relatively parsimonious
feature set. It contains no built in ORM nor any particular database bindings. It contains no form generation
framework. It has no administrative web user interface. It has no built in text indexing. It does not dictate
how you arrange your code.

Such opinionated functionality exists in applications and frameworks built on top of Pyramid. It’s intended
that higher-level systems emerge built using Pyramid as a base.

See also:

See also Pyramid Applications Are Extensible; I Don’t Believe in Application Extensibility.

0.1. Front Matter 21


The Pyramid Web Framework, Version 1.9.4

Pyramid Provides Too Many ”Rails”

Pyramid provides some features that other web frameworks do not. These are features meant for use cases
that might not make sense to you if you’re building a simple bespoke web application:

• An optional way to map URLs to code using traversal which implies a walk of a resource tree.

• The ability to aggregate Pyramid application configuration from multiple sources using pyramid.
config.Configurator.include().

• View and subscriber registrations made using interface objects instead of class objects (e.g., Using
Resource Interfaces in View Configuration).

• A declarative authorization system.

• Multiple separate I18N translation string factories, each of which can name its own domain.

These features are important to the authors of Pyramid. The Pyramid authors are often commissioned
to build CMS-style applications. Such applications are often frameworky because they have more than
one deployment. Each deployment requires a slightly different composition of sub-applications, and the
framework and sub-applications often need to be extensible. Because the application has more than one
deployment, pluggability and extensibility is important, as maintaining multiple forks of the application,
one per deployment, is extremely undesirable. Because it’s easier to extend a system that uses traversal
from the outside than it is to do the same in a system that uses URL dispatch, each deployment uses
a resource tree composed of a persistent tree of domain model objects, and uses traversal to map view
callable code to resources in the tree. The resource tree contains very granular security declarations, as
resources are owned and accessible by different sets of users. Interfaces are used to make unit testing and
implementation substitutability easier.

In a bespoke web application, usually there’s a single canonical deployment, and therefore no possibility of
multiple code forks. Extensibility is not required; the code is just changed in place. Security requirements
are often less granular. Using the features listed above will often be overkill for such an application.

If you don’t like these features, it doesn’t mean you can’t or shouldn’t use Pyramid. They are all optional,
and a lot of time has been spent making sure you don’t need to know about them up front. You can build
”Pylons 1.X style” applications using Pyramid that are purely bespoke by ignoring the features above. You
may find these features handy later after building a bespoke web application that suddenly becomes popular
and requires extensibility because it must be deployed in multiple locations.

22 Contents
The Pyramid Web Framework, Version 1.9.4

Pyramid Is Too Big

”The Pyramid compressed tarball is larger than 2MB. It must be enormous!”

No. We just ship it with docs, test code, and scaffolding. Here’s a breakdown of what’s included in
subdirectories of the package tree:

docs/

3.6MB

pyramid/tests/

1.3MB

pyramid/scaffolds/

133KB

pyramid/ (except for pyramid/tests and pyramid/scaffolds)

812KB

Of the approximately 34K lines of Python code in the package, the code that actually has a chance of
executing during normal operation, excluding tests and scaffolding Python files, accounts for approximately
10K lines.

Pyramid Has Too Many Dependencies

Over time, we’ve made lots of progress on reducing the number of packaging dependencies Pyramid has
had. Pyramid 1.2 had 15 of them. Pyramid 1.3 and 1.4 had 12 of them. The current release as of this
writing, Pyramid 1.5, has only 7. This number is unlikely to become any smaller.

A port to Python 3 completed in Pyramid 1.3 helped us shed a good number of dependencies by forcing
us to make better packaging decisions. Removing Chameleon and Mako templating system dependencies
in the Pyramid core in 1.5 let us shed most of the remainder of them.

0.1. Front Matter 23


The Pyramid Web Framework, Version 1.9.4

Pyramid ”Cheats” to Obtain Speed

Complaints have been lodged by other web framework authors at various times that Pyramid ”cheats” to
gain performance. One claimed cheating mechanism is our use (transitively) of the C extensions provided
by zope.interface to do fast lookups. Another claimed cheating mechanism is the religious avoidance
of extraneous function calls.

If there’s such a thing as cheating to get better performance, we want to cheat as much as possible. We
optimize Pyramid aggressively. This comes at a cost. The core code has sections that could be expressed
with more readability. As an amelioration, we’ve commented these sections liberally.

Pyramid Gets Its Terminology Wrong (”MVC”)

”I’m a MVC web framework user, and I’m confused. Pyramid calls the controller a view! And it doesn’t
have any controllers.”

If you are in this camp, you might have come to expect things about how your existing ”MVC” framework
uses its terminology. For example, you probably expect that models are ORM models, controllers are
classes that have methods that map to URLs, and views are templates. Pyramid indeed has each of these
concepts, and each probably works almost exactly like your existing ”MVC” web framework. We just don’t
use the MVC terminology, as we can’t square its usage in the web framework space with historical reality.

People very much want to give web applications the same properties as common desktop GUI platforms
by using similar terminology, and to provide some frame of reference for how various components in the
common web framework might hang together. But in the opinion of the author, ”MVC” doesn’t match the
web very well in general. Quoting from the Model-View-Controller Wikipedia entry:

Though MVC comes in different flavors, control flow is generally as follows:

The user interacts with the user interface in some way (for example, presses a
mouse button).

The controller handles the input event from the user interface, often via a registered
handler or callback and converts the event into appropriate user action, understand-
able for the model.

The controller notifies the model of the user action, possibly resulting in a change in
the model’s state. (For example, the controller updates the user’s shopping cart.)[5]

A view queries the model in order to generate an appropriate user interface (for
example, the view lists the shopping cart’s contents). Note that the view gets its
own data from the model.

24 Contents
The Pyramid Web Framework, Version 1.9.4

The controller may (in some implementations) issue a general instruction to the
view to render itself. In others, the view is automatically notified by the model of
changes in state (Observer) which require a screen update.

The user interface waits for further user interactions, which restarts the cycle.

To the author, it seems as if someone edited this Wikipedia definition, tortuously couching concepts in the
most generic terms possible in order to account for the use of the term ”MVC” by current web frameworks.
I doubt such a broad definition would ever be agreed to by the original authors of the MVC pattern. But
even so, it seems most MVC web frameworks fail to meet even this falsely generic definition.

For example, do your templates (views) always query models directly as is claimed in ”note that the view
gets its own data from the model”? Probably not. My ”controllers” tend to do this, massaging the data
for easier use by the ”view” (template). What do you do when your ”controller” returns JSON? Do your
controllers use a template to generate JSON? If not, what’s the ”view” then? Most MVC-style GUI web
frameworks have some sort of event system hooked up that lets the view detect when the model changes.
The web just has no such facility in its current form; it’s effectively pull-only.

So, in the interest of not mistaking desire with reality, and instead of trying to jam the square peg that is
the web into the round hole of ”MVC”, we just punt and say there are two things: resources and views.
The resource tree represents a site structure, the view presents a resource. The templates are really just an
implementation detail of any given view. A view doesn’t need a template to return a response. There’s no
”controller”; it just doesn’t exist. The ”model” is either represented by the resource tree or by a ”domain
model” (like an SQLAlchemy model) that is separate from the framework entirely. This seems to us like
more reasonable terminology, given the current constraints of the web.

Pyramid Applications Are Extensible; I Don’t Believe in Application Extensibility

Any Pyramid application written obeying certain constraints is extensible. This feature is discussed in
the Pyramid documentation chapters named Extending an Existing Pyramid Application and Advanced
Configuration. It is made possible by the use of the Zope Component Architecture within Pyramid.

”Extensible” in this context means:

• The behavior of an application can be overridden or extended in a particular deployment of the


application without requiring that the deployer modify the source of the original application.

• The original developer is not required to anticipate any extensibility plug points at application cre-
ation time to allow fundamental application behavior to be overridden or extended.

0.1. Front Matter 25


The Pyramid Web Framework, Version 1.9.4

• The original developer may optionally choose to anticipate an application-specific set of plug points,
which may be hooked by a deployer. If they choose to use the facilities provided by the ZCA, the
original developer does not need to think terribly hard about the mechanics of introducing such a
plug point.

Many developers seem to believe that creating extensible applications is not worth it. They instead sug-
gest that modifying the source of a given application for each deployment to override behavior is more
reasonable. Much discussion about version control branching and merging typically ensues.

It’s clear that making every application extensible isn’t required. The majority of web applications only
have a single deployment, and thus needn’t be extensible at all. However some web applications have
multiple deployments, and others have many deployments. For example, a generic content management
system (CMS) may have basic functionality that needs to be extended for a particular deployment. That
CMS may be deployed for many organizations at many places. Some number of deployments of this CMS
may be deployed centrally by a third party and managed as a group. It’s easier to be able to extend such a
system for each deployment via preordained plug points than it is to continually keep each software branch
of the system in sync with some upstream source. The upstream developers may change code in such a way
that your changes to the same codebase conflict with theirs in fiddly, trivial ways. Merging such changes
repeatedly over the lifetime of a deployment can be difficult and time consuming, and it’s often useful to
be able to modify an application for a particular deployment in a less invasive way.

If you don’t want to think about Pyramid application extensibility at all, you needn’t. You can ignore
extensibility entirely. However if you follow the set of rules defined in Extending an Existing Pyramid
Application, you don’t need to make your application extensible. Any application you write in the frame-
work just is automatically extensible at a basic level. The mechanisms that deployers use to extend it will
be necessarily coarse. Typically views, routes, and resources will be capable of being overridden. But for
most minor (and even some major) customizations, these are often the only override plug points neces-
sary. If the application doesn’t do exactly what the deployment requires, it’s often possible for a deployer
to override a view, route, or resource, and quickly make it do what they want it to do in ways not neces-
sarily anticipated by the original developer. Here are some example scenarios demonstrating the benefits
of such a feature.

• If a deployment needs a different styling, the deployer may override the main template and the CSS
in a separate Python package which defines overrides.

• If a deployment needs an application page to do something differently, or to expose more or different


information, the deployer may override the view that renders the page within a separate Python
package.

• If a deployment needs an additional feature, the deployer may add a view to the override package.

26 Contents
The Pyramid Web Framework, Version 1.9.4

As long as the fundamental design of the upstream package doesn’t change, these types of modifications
often survive across many releases of the upstream package without needing to be revisited.

Extending an application externally is not a panacea, and carries a set of risks similar to branching and
merging. Sometimes major changes upstream will cause you to revisit and update some of your modifica-
tions. But you won’t regularly need to deal with meaningless textual merge conflicts that trivial changes to
upstream packages often entail when it comes time to update the upstream package, because if you extend
an application externally, there just is no textual merge done. Your modifications will also, for whatever
it’s worth, be contained in one, canonical, well-defined place.

Branching an application and continually merging in order to get new features and bug fixes is clearly
useful. You can do that with a Pyramid application just as usefully as you can do it with any application.
But deployment of an application written in Pyramid makes it possible to avoid the need for this even if
the application doesn’t define any plug points ahead of time. It’s possible that promoters of competing web
frameworks dismiss this feature in favor of branching and merging because applications written in their
framework of choice aren’t extensible out of the box in a comparably fundamental way.

While Pyramid applications are fundamentally extensible even if you don’t write them with specific ex-
tensibility in mind, if you’re moderately adventurous, you can also take it a step further. If you learn more
about the Zope Component Architecture, you can optionally use it to expose other more domain-specific
configuration plug points while developing an application. The plug points you expose needn’t be as coarse
as the ones provided automatically by Pyramid itself. For example, you might compose your own direc-
tive that configures a set of views for a pre-baked purpose (e.g., restview or somesuch), allowing other
people to refer to that directive when they make declarations in the includeme of their customization
package. There is a cost for this: the developer of an application that defines custom plug points for its
deployers will need to understand the ZCA or they will need to develop their own similar extensibility
system.

Ultimately any argument about whether the extensibility features lent to applications by Pyramid are good
or bad is mostly pointless. You needn’t take advantage of the extensibility features provided by a particular
Pyramid application in order to affect a modification for a particular set of its deployments. You can
ignore the application’s extensibility plug points entirely, and use version control branching and merging
to manage application deployment modifications instead, as if you were deploying an application written
using any other web framework.

Zope 3 Enforces ”TTW” Authorization Checks by Default; Pyramid Does Not

Challenge

Pyramid performs automatic authorization checks only at view execution time. Zope 3 wraps context
objects with a security proxy, which causes Zope 3 also to do security checks during attribute access. I
like this, because it means:

0.1. Front Matter 27


The Pyramid Web Framework, Version 1.9.4

1) When I use the security proxy machinery, I can have a view that conditionally displays certain
HTML elements (like form fields) or prevents certain attributes from being modified depending on
the permissions that the accessing user possesses with respect to a context object.

2) I want to also expose my resources via a REST API using Twisted Web. If Pyramid performed au-
thorization based on attribute access via Zope3’s security proxies, I could enforce my authorization
policy in both Pyramid and in the Twisted-based system the same way.

Defense

Pyramid was developed by folks familiar with Zope 2, which has a ”through the web” security model. This
TTW security model was the precursor to Zope 3’s security proxies. Over time, as the Pyramid developers
(working in Zope 2) created such sites, we found authorization checks during code interpretation extremely
useful in a minority of projects. But much of the time, TTW authorization checks usually slowed down the
development velocity of projects that had no delegation requirements. In particular, if we weren’t allowing
untrusted users to write arbitrary Python code to be executed by our application, the burden of through the
web security checks proved too costly to justify. We (collectively) haven’t written an application on top of
which untrusted developers are allowed to write code in many years, so it seemed to make sense to drop
this model by default in a new web framework.

And since we tend to use the same toolkit for all web applications, it’s just never been a concern to be able
to use the same set of restricted-execution code under two different web frameworks.

Justifications for disabling security proxies by default notwithstanding, given that Zope 3 security proxies
are viral by nature, the only requirement to use one is to make sure you wrap a single object in a security
proxy and make sure to access that object normally when you want proxy security checks to happen. It
is possible to override the Pyramid traverser for a given application (see Changing the Traverser). To
get Zope3-like behavior, it is possible to plug in a different traverser which returns Zope3-security-proxy-
wrapped objects for each traversed object (including the context and the root). This would have the effect
of creating a more Zope3-like environment without much effort.

Pyramid uses its own HTTP exception class hierarchy rather than webob.exc

New in version 1.1.

The HTTP exception classes defined in pyramid.httpexceptions are very much like the ones de-
fined in webob.exc, (e.g., HTTPNotFound or HTTPForbidden). They have the same names and
largely the same behavior, and all have a very similar implementation, but not the same identity. Here’s
why they have a separate identity.

28 Contents
The Pyramid Web Framework, Version 1.9.4

• Making them separate allows the HTTP exception classes to subclass pyramid.response.
Response. This speeds up response generation slightly due to the way the Pyramid router works.
The same speed up could be gained by monkeypatching webob.response.Response, but it’s
usually the case that monkeypatching turns out to be evil and wrong.
• Making them separate allows them to provide alternate __call__ logic, which also speeds up
response generation.
• Making them separate allows the exception classes to provide for the proper value of
RequestClass (pyramid.request.Request).
• Making them separate gives us freedom from thinking about backwards compatibility code present
in webob.exc related to Python 2.4, which we no longer support in Pyramid 1.1+.
• We change the behavior of two classes (HTTPNotFound and HTTPForbidden) in the module
so that they can be used by Pyramid internally for notfound and forbidden exceptions.
• Making them separate allows us to influence the docstrings of the exception classes to provide
Pyramid-specific documentation.
• Making them separate allows us to silence a stupid deprecation warning under Python 2.6 when the
response objects are used as exceptions (related to self.message).

Pyramid has simpler traversal machinery than does Zope

Zope’s default traverser:


• Allows developers to mutate the traversal name stack while traversing (they can add and remove path
elements).
• Attempts to use an adaptation to obtain the next element in the path from the currently traversed
object, falling back to __bobo_traverse__, __getitem__, and eventually __getattr__.
Zope’s default traverser allows developers to mutate the traversal name stack during traversal by mutat-
ing REQUEST['TraversalNameStack']. Pyramid’s default traverser (pyramid.traversal.
ResourceTreeTraverser) does not offer a way to do this. It does not maintain a stack as a request
attribute and, even if it did, it does not pass the request to resource objects while it’s traversing. While it
was handy at times, this feature was abused in frameworks built atop Zope (like CMF and Plone), often
making it difficult to tell exactly what was happening when a traversal didn’t match a view. I felt it was
better for folks that wanted the feature to make them replace the traverser rather than build that particular
honey pot in to the default traverser.
Zope uses multiple mechanisms to attempt to obtain the next element in the resource tree based on a name.
It first tries an adaptation of the current resource to ITraversable, and if that fails, it falls back to
attempting a number of magic methods on the resource (__bobo_traverse__, __getitem__, and
__getattr__). My experience while both using Zope and attempting to reimplement its publisher in
repoze.zope2 led me to believe the following:

0.1. Front Matter 29


The Pyramid Web Framework, Version 1.9.4

• The default traverser should be as simple as possible. Zope’s publisher is somewhat difficult to
follow and replicate due to the fallbacks it tried when one traversal method failed. It is also slow.

• The entire traverser should be replaceable, not just elements of the traversal machinery. Pyramid
has a few big components rather than a plethora of small ones. If the entire traverser is replaceable,
it’s an antipattern to make portions of the default traverser replaceable. Doing so is a ”knobs on
knobs” pattern, which is unfortunately somewhat endemic in Zope. In a ”knobs on knobs” pattern, a
replaceable subcomponent of a larger component is made configurable using the same configuration
mechanism that can be used to replace the larger component. For example, in Zope, you can replace
the default traverser by registering an adapter. But you can also (or alternately) control how the
default traverser traverses by registering one or more adapters. As a result of being able to either
replace the larger component entirely or turn knobs on the default implementation of the larger
component, no one understands when (or whether) they should ever override the larger component
entrirely. This results, over time, in a rusting together of the larger ”replaceable” component and
the framework itself because people come to depend on the availability of the default component
in order just to turn its knobs. The default component effectively becomes part of the framework,
which entirely subverts the goal of making it replaceable. In Pyramid, typically if a component is
replaceable, it will itself have no knobs (it will be solid state). If you want to influence behavior
controlled by that component, you will replace the component instead of turning knobs attached to
the component.

Microframeworks have smaller Hello World programs

Self-described ”microframeworks” exist. Bottle and Flask are two that are becoming popular. Bobo doesn’t
describe itself as a microframework, but its intended user base is much the same. Many others exist. We’ve
even (only as a teaching tool, not as any sort of official project) created one using Pyramid. The videos use
BFG, a precursor to Pyramid, but the resulting code is available for Pyramid too). Microframeworks are
small frameworks with one common feature: each allows its users to create a fully functional application
that lives in a single Python file.

Some developers and microframework authors point out that Pyramid’s ”hello world” single-file program
is longer (by about five lines) than the equivalent program in their favorite microframework. Guilty as
charged.

This loss isn’t for lack of trying. Pyramid is useful in the same circumstance in which microframe-
works claim dominance: single-file applications. But Pyramid doesn’t sacrifice its ability to credibly
support larger applications in order to achieve ”hello world” lines of code parity with the current crop of
microframeworks. Pyramid’s design instead tries to avoid some common pitfalls associated with naive
declarative configuration schemes. The subsections which follow explain the rationale.

30 Contents
The Pyramid Web Framework, Version 1.9.4

Application programmers don’t control the module-scope codepath (import-time side-


effects are evil)

Imagine a directory structure with a set of Python files in it:

.
|-- app.py
|-- app2.py
`-- config.py

The contents of app.py:

1 from config import decorator


2 from config import L
3 import pprint
4

5 @decorator
6 def foo():
7 pass
8

9 if __name__ == '__main__':
10 import app2
11 pprint.pprint(L)

The contents of app2.py:

1 import app
2

3 @app.decorator
4 def bar():
5 pass

The contents of config.py:

1 L = []
2

3 def decorator(func):
4 L.append(func)
5 return func

0.1. Front Matter 31


The Pyramid Web Framework, Version 1.9.4

If we cd to the directory that holds these files, and we run python app.py, given the directory structure
and code above, what happens? Presumably, our decorator decorator will be used twice, once by the
decorated function foo in app.py, and once by the decorated function bar in app2.py. Since each
time the decorator is used, the list L in config.py is appended to, we’d expect a list with two elements
to be printed, right? Sadly, no:

[chrism@thinko]$ python app.py


[<function foo at 0x7f4ea41ab1b8>,
<function foo at 0x7f4ea41ab230>,
<function bar at 0x7f4ea41ab2a8>]

By visual inspection, that outcome (three different functions in the list) seems impossible. We defined only
two functions, and we decorated each of those functions only once, so we believe that the decorator
decorator will run only twice. However, what we believe is in fact wrong, because the code at module
scope in our app.py module was executed twice. The code is executed once when the script is run as
__main__ (via python app.py), and then it is executed again when app2.py imports the same file
as app.

What does this have to do with our comparison to microframeworks? Many microframeworks in the current
crop (e.g., Bottle and Flask) encourage you to attach configuration decorators to objects defined at module
scope. These decorators execute arbitrarily complex registration code, which populates a singleton registry
that is a global which is in turn defined in external Python module. This is analogous to the above example:
the ”global registry” in the above example is the list L.

Let’s see what happens when we use the same pattern with the Groundhog microframework. Replace the
contents of app.py above with this:

1 from config import gh


2

3 @gh.route('/foo/')
4 def foo():
5 return 'foo'
6

7 if __name__ == '__main__':
8 import app2
9 pprint.pprint(L)

Replace the contents of app2.py above with this:

32 Contents
The Pyramid Web Framework, Version 1.9.4

1 import app
2

3 @app.gh.route('/bar/')
4 def bar():
5 'return bar'

Replace the contents of config.py above with this:

1 from groundhog import Groundhog


2 gh = Groundhog('myapp', 'seekrit')

How many routes will be registered within the routing table of the ”gh” Groundhog application? If you
answered three, you are correct. How many would a casual reader (and any sane developer) expect to be
registered? If you answered two, you are correct. Will the double registration be a problem? With our
Groundhog framework’s route method backing this application, not really. It will slow the application
down a little bit, because it will need to miss twice for a route when it does not match. Will it be a problem
with another framework, another application, or another decorator? Who knows. You need to understand
the application in its totality, the framework in its totality, and the chronology of execution to be able to
predict what the impact of unintentional code double-execution will be.

The encouragement to use decorators which perform population of an external registry has an unintended
consequence: the application developer now must assert ownership of every code path that executes Python
module scope code. Module-scope code is presumed by the current crop of decorator-based microframe-
works to execute once and only once. If it executes more than once, weird things will start to happen. It
is up to the application developer to maintain this invariant. Unfortunately, in reality this is an impossible
task, because Python programmers do not own the module scope code path, and never will. Anyone who
tries to sell you on the idea that they do so is simply mistaken. Test runners that you may want to use to run
your code’s tests often perform imports of arbitrary code in strange orders that manifest bugs like the one
demonstrated above. API documentation generation tools do the same. Some people even think it’s safe
to use the Python reload command, or delete objects from sys.modules, each of which has hilarious
effects when used against code that has import-time side effects.

Global registry-mutating microframework programmers therefore will at some point need to start reading
the tea leaves about what might happen if module scope code gets executed more than once, like we do in
the previous paragraph. When Python programmers assume they can use the module-scope code path to
run arbitrary code (especially code which populates an external registry), and this assumption is challenged
by reality, the application developer is often required to undergo a painful, meticulous debugging process
to find the root cause of an inevitably obscure symptom. The solution is often to rearrange application
import ordering, or move an import statement from module-scope into a function body. The rationale for
doing so can never be expressed adequately in the commit message which accompanies the fix, and can’t
be documented succinctly enough for the benefit of the rest of the development team so that the problem

0.1. Front Matter 33


The Pyramid Web Framework, Version 1.9.4

never happens again. It will happen again, especially if you are working on a project with other people who
haven’t yet internalized the lessons you learned while you stepped through module-scope code using pdb.
This is a very poor situation in which to find yourself as an application developer: you probably didn’t
even know you or your team signed up for the job, because the documentation offered by decorator-based
microframeworks don’t warn you about it.

Folks who have a large investment in eager decorator-based configuration that populates an external data
structure (such as microframework authors) may argue that the set of circumstances I outlined above is
anomalous and contrived. They will argue that it just will never happen. If you never intend your applica-
tion to grow beyond one or two or three modules, that’s probably true. However, as your codebase grows,
and becomes spread across a greater number of modules, the circumstances in which module-scope code
will be executed multiple times will become more and more likely to occur and less and less predictable.
It’s not responsible to claim that double-execution of module-scope code will never happen. It will; it’s
just a matter of luck, time, and application complexity.

If microframework authors do admit that the circumstance isn’t contrived, they might then argue that real
damage will never happen as the result of the double-execution (or triple-execution, etc.) of module scope
code. You would be wise to disbelieve this assertion. The potential outcomes of multiple execution are
too numerous to predict because they involve delicate relationships between application and framework
code as well as chronology of code execution. It’s literally impossible for a framework author to know
what will happen in all circumstances. But even if given the gift of omniscience for some limited set of
circumstances, the framework author almost certainly does not have the double-execution anomaly in mind
when coding new features. They’re thinking of adding a feature, not protecting against problems that might
be caused by the 1% multiple execution case. However, any 1% case may cause 50% of your pain on a
project, so it’d be nice if it never occurred.

Responsible microframeworks actually offer a back-door way around the problem. They allow you to
disuse decorator-based configuration entirely. Instead of requiring you to do the following:

1 gh = Groundhog('myapp', 'seekrit')
2

3 @gh.route('/foo/')
4 def foo():
5 return 'foo'
6

7 if __name__ == '__main__':
8 gh.run()

They allow you to disuse the decorator syntax and go almost all-imperative:

34 Contents
The Pyramid Web Framework, Version 1.9.4

1 def foo():
2 return 'foo'
3

4 gh = Groundhog('myapp', 'seekrit')
5

6 if __name__ == '__main__':
7 gh.add_route(foo, '/foo/')
8 gh.run()

This is a generic mode of operation that is encouraged in the Pyramid documentation. Some existing
microframeworks (Flask, in particular) allow for it as well. None (other than Pyramid) encourage it. If
you never expect your application to grow beyond two or three or four or ten modules, it probably doesn’t
matter very much which mode you use. If your application grows large, however, imperative configuration
can provide better predictability.

Astute readers may notice that Pyramid has configuration decorators too. Aha! Don’t these decorators
have the same problems? No. These decorators do not populate an external Python module when they are
executed. They only mutate the functions (and classes and methods) to which they’re attached. These
mutations must later be found during a scan process that has a predictable and structured import phase.
Module-localized mutation is actually the best-case circumstance for double-imports. If a module only
mutates itself and its contents at import time, if it is imported twice, that’s OK, because each decorator
invocation will always be mutating an independent copy of the object to which it’s attached, not a shared
resource like a registry in another module. This has the effect that double-registrations will never be
performed.

Routes need relative ordering

Consider the following simple Groundhog application:

1 from groundhog import Groundhog


2 app = Groundhog('myapp', 'seekrit')
3

4 @app.route('/admin')
5 def admin():
6 return '<html>admin page</html>'
7

(continues on next page)

0.1. Front Matter 35


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


8 @app.route('/:action')
9 def do_action(action):
10 if action == 'add':
11 return '<html>add</html>'
12 if action == 'delete':
13 return '<html>delete</html>'
14 return app.abort(404)
15

16 if __name__ == '__main__':
17 app.run()

If you run this application and visit the URL /admin, you will see the ”admin” page. This is the intended
result. However, what if you rearrange the order of the function definitions in the file?

1 from groundhog import Groundhog


2 app = Groundhog('myapp', 'seekrit')
3

4 @app.route('/:action')
5 def do_action(action):
6 if action == 'add':
7 return '<html>add</html>'
8 if action == 'delete':
9 return '<html>delete</html>'
10 return app.abort(404)
11

12 @app.route('/admin')
13 def admin():
14 return '<html>admin page</html>'
15

16 if __name__ == '__main__':
17 app.run()

If you run this application and visit the URL /admin, your app will now return a 404 error. This is proba-
bly not what you intended. The reason you see a 404 error when you rearrange function definition ordering
is that routing declarations expressed via our microframework’s routing decorators have an ordering, and
that ordering matters.

In the first case, where we achieved the expected result, we first added a route with the pattern /admin,
then we added a route with the pattern /:action by virtue of adding routing patterns via decorators at
module scope. When a request with a PATH_INFO of /admin enters our application, the web framework
loops over each of our application’s route patterns in the order in which they were defined in our module.

36 Contents
The Pyramid Web Framework, Version 1.9.4

As a result, the view associated with the /admin routing pattern will be invoked because it matches first.
All is right with the world.

In the second case, where we did not achieve the expected result, we first added a route with the pattern
/:action, then we added a route with the pattern /admin. When a request with a PATH_INFO of
/admin enters our application, the web framework loops over each of our application’s route patterns in
the order in which they were defined in our module. As a result, the view associated with the /:action
routing pattern will be invoked because it matches first. A 404 error is raised. This is not what we wanted;
it just happened due to the order in which we defined our view functions.

This is because Groundhog routes are added to the routing map in import order, and matched in the same
order when a request comes in. Bottle, like Groundhog, as of this writing, matches routes in the order in
which they’re defined at Python execution time. Flask, on the other hand, does not order route matching
based on import order. Instead it reorders the routes you add to your application based on their ”complex-
ity”. Other microframeworks have varying strategies to do route ordering.

Your application may be small enough where route ordering will never cause an issue. If your application
becomes large enough, however, being able to specify or predict that ordering as your application grows
larger will be difficult. At some point, you will likely need to start controlling route ordering more explicitly,
especially in applications that require extensibility.

If your microframework orders route matching based on complexity, you’ll need to understand what is
meant by ”complexity”, and you’ll need to attempt to inject a ”less complex” route to have it get matched
before any ”more complex” one to ensure that it’s tried first.

If your microframework orders its route matching based on relative import/execution of function decorator
definitions, you will need to ensure that you execute all of these statements in the ”right” order, and you’ll
need to be cognizant of this import/execution ordering as you grow your application or try to extend it.
This is a difficult invariant to maintain for all but the smallest applications.

In either case, your application must import the non-__main__ modules which contain configuration
decorations somehow for their configuration to be executed. Does that make you a little uncomfortable?
It should, because Application programmers don’t control the module-scope codepath (import-time side-
effects are evil).

Pyramid uses neither decorator import time ordering nor does it attempt to divine the relative complexity
of one route to another as a means to define a route match ordering. In Pyramid, you have to maintain rel-
ative route ordering imperatively via the chronology of multiple executions of the pyramid.config.
Configurator.add_route() method. The order in which you repeatedly call add_route be-
comes the order of route matching.

If needing to maintain this imperative ordering truly bugs you, you can use traversal instead of route
matching, which is a completely declarative (and completely predictable) mechanism to map code to URLs.
While URL dispatch is easier to understand for small non-extensible applications, traversal is a great fit
for very large applications and applications that need to be arbitrarily extensible.

0.1. Front Matter 37


The Pyramid Web Framework, Version 1.9.4

”Stacked object proxies” are too clever / thread locals are a nuisance

Some microframeworks use the import statement to get a handle to an object which is not logically
global:

1 from flask import request


2

3 @app.route('/login', methods=['POST', 'GET'])


4 def login():
5 error = None
6 if request.method == 'POST':
7 if valid_login(request.form['username'],
8 request.form['password']):
9 return log_the_user_in(request.form['username'])
10 else:
11 error = 'Invalid username/password'
12 # this is executed if the request method was GET or the
13 # credentials were invalid

The Pylons 1.X web framework uses a similar strategy. It calls these things ”Stacked Object Proxies”, so,
for purposes of this discussion, I’ll do so as well.

Import statements in Python (import foo, from bar import baz) are most frequently performed
to obtain a reference to an object defined globally within an external Python module. However, in normal
programs, they are never used to obtain a reference to an object that has a lifetime measured by the scope
of the body of a function. It would be absurd to try to import, for example, a variable named i representing
a loop counter defined in the body of a function. For example, we’d never try to import i from the code
below:

1 def afunc():
2 for i in range(10):
3 print(i)

By its nature, the request object that is created as the result of a WSGI server’s call into a long-lived web
framework cannot be global, because the lifetime of a single request will be much shorter than the lifetime
of the process running the framework. A request object created by a web framework actually has more
similarity to the i loop counter in our example above than it has to any comparable importable object
defined in the Python standard library or in normal library code.

However, systems which use stacked object proxies promote locally scoped objects, such as request,
out to module scope, for the purpose of being able to offer users a nice spelling involving import. They,

38 Contents
The Pyramid Web Framework, Version 1.9.4

for what I consider dubious reasons, would rather present to their users the canonical way of getting at
a request as from framework import request instead of a saner from myframework.
threadlocals import get_request; request = get_request(), even though the lat-
ter is more explicit.

It would be most explicit if the microframeworks did not use thread local variables at all. Pyramid view
functions are passed a request object. Many of Pyramid’s APIs require that an explicit request object be
passed to them. It is possible to retrieve the current Pyramid request as a threadlocal variable, but it is an
”in case of emergency, break glass” type of activity. This explicitness makes Pyramid view functions more
easily unit testable, as you don’t need to rely on the framework to manufacture suitable ”dummy” request
(and other similarly-scoped) objects during test setup. It also makes them more likely to work on arbitrary
systems, such as async servers, that do no monkeypatching.

Explicitly WSGI

Some microframeworks offer a run() method of an application object that executes a default server
configuration for easy execution.

Pyramid doesn’t currently try to hide the fact that its router is a WSGI application behind a convenience
run() API. It just tells people to import a WSGI server and use it to serve up their Pyramid application
as per the documentation of that WSGI server.

The extra lines saved by abstracting away the serving step behind run() seems to have driven dubi-
ous second-order decisions related to its API in some microframeworks. For example, Bottle contains a
ServerAdapter subclass for each type of WSGI server it supports via its app.run() mechanism.
This means that there exists code in bottle.py that depends on the following modules: wsgiref,
flup, paste, cherrypy, fapws, tornado, google.appengine, twisted.web, diesel,
gevent, gunicorn, eventlet, and rocket. You choose the kind of server you want to run by
passing its name into the run method. In theory, this sounds great: I can try out Bottle on gunicorn
just by passing in a name! However, to fully test Bottle, all of these third-party systems must be installed
and functional. The Bottle developers must monitor changes to each of these packages and make sure their
code still interfaces properly with them. This increases the number of packages required for testing greatly;
this is a lot of requirements. It is likely difficult to fully automate these tests due to requirements conflicts
and build issues.

As a result, for single-file apps, we currently don’t bother to offer a run() shortcut. We tell folks to import
their WSGI server of choice and run it by hand. For the people who want a server abstraction layer, we
suggest that they use PasteDeploy. In PasteDeploy-based systems, the onus for making sure that the server
can interface with a WSGI application is placed on the server developer, not the web framework developer,
making it more likely to be timely and correct.

0.1. Front Matter 39


The Pyramid Web Framework, Version 1.9.4

Wrapping up

Here’s a diagrammed version of the simplest pyramid application, where the inlined comments take into
account what we’ve discussed in the Microframeworks have smaller Hello World programs section.

1 from wsgiref.simple_server import make_server # explicitly WSGI


2 from pyramid.config import Configurator # to configure app registry
3 from pyramid.response import Response # explicit response, no␣
,→threadlocal

5 def hello_world(request): # accept a request; no request␣


,→threadlocal reqd

6 # explicit response object means no response threadlocal


7 return Response('Hello world!')
8

9 if __name__ == '__main__':
10 with Configurator() as config: # no global application object
11 config.add_view(hello_world) # explicit non-decorator␣
,→registration

12 app = config.make_wsgi_app() # explicitly WSGI


13 server = make_server('0.0.0.0', 8080, app)
14 server.serve_forever() # explicitly WSGI

Pyramid doesn’t offer pluggable apps

It is ”Pyramidic” to compose multiple external sources into the same configuration using include().
Any number of includes can be done to compose an application; includes can even be done from within
other includes. Any directive can be used within an include that can be used outside of one (such as
add_view()).

Pyramid has a conflict detection system that will throw an error if two included externals try to add the
same configuration in a conflicting way (such as both externals trying to add a route using the same name,
or both externals trying to add a view with the same set of predicates). It’s awful tempting to call this set
of features something that can be used to compose a system out of ”pluggable applications”. But in reality,
there are a number of problems with claiming this:

• The terminology is strained. Pyramid really has no notion of a plurality of ”applications”, just a
way to compose configuration from multiple sources to create a single WSGI application. That
WSGI application may gain behavior by including or disincluding configuration, but once it’s all
composed together, Pyramid doesn’t really provide any machinery which can be used to demarcate
the boundaries of one ”application” (in the sense of configuration from an external that adds routes,
views, etc) from another.

40 Contents
The Pyramid Web Framework, Version 1.9.4

• Pyramid doesn’t provide enough ”rails” to make it possible to integrate truly honest-to-god,
download-an-app-from-a-random-place and-plug-it-in-to-create-a-system ”pluggable” applications.
Because Pyramid itself isn’t opinionated (it doesn’t mandate a particular kind of database, it of-
fers multiple ways to map URLs to code, etc), it’s unlikely that someone who creates something
application-like will be able to casually redistribute it to J. Random Pyramid User and have it just
work by asking him to config.include a function from the package. This is particularly true of very
high level components such as blogs, wikis, twitter clones, commenting systems, etc. The integrator
(the Pyramid developer who has downloaded a package advertised as a ”pluggable app”) will almost
certainly have made different choices about e.g. what type of persistence system he’s using, and for
the integrator to appease the requirements of the ”pluggable application”, he may be required to set
up a different database, make changes to his own code to prevent his application from shadowing
the pluggable app (or vice versa), and any other number of arbitrary changes.
For this reason, we claim that Pyramid has ”extensible” applications, not pluggable applications. Any
Pyramid application can be extended without forking it as long as its configuration statements have been
composed into things that can be pulled in via config.include.
It’s also perfectly reasonable for a single developer or team to create a set of interoperating components
which can be enabled or disabled by using config.include. That developer or team will be able to provide
the ”rails” (by way of making high-level choices about the technology used to create the project, so there
won’t be any issues with plugging all of the components together. The problem only rears its head when
the components need to be distributed to arbitrary users. Note that Django has a similar problem with
”pluggable applications” that need to work for arbitrary third parties, even though they provide many,
many more rails than does Pyramid. Even the rails they provide are not enough to make the ”pluggable
application” story really work without local modification.
Truly pluggable applications need to be created at a much higher level than a web framework, as no web
framework can offer enough constraints to really make them work out of the box. They really need to plug
into an application, instead. It would be a noble goal to build an application with Pyramid that provides
these constraints and which truly does offer a way to plug in applications (Joomla, Plone, Drupal come to
mind).

Pyramid Has Zope Things In It, So It’s Too Complex

On occasion, someone will feel compelled to post a mailing list message that reads something like this:

had a quick look at pyramid ... too complex to me and not really
understand for which benefits.. I feel should consider whether it's␣
,→time

for me to step back to django .. I always hated zope (useless ?)


complexity and I love simple way of thinking

(Paraphrased from a real email, actually.)


Let’s take this criticism point-by-point.

0.1. Front Matter 41


The Pyramid Web Framework, Version 1.9.4

Too Complex

If you can understand this ”hello world” program, you can use Pyramid:

1 from wsgiref.simple_server import make_server


2 from pyramid.config import Configurator
3 from pyramid.response import Response
4

5 def hello_world(request):
6 return Response('Hello world!')
7

8 if __name__ == '__main__':
9 with Configurator() as config:
10 config.add_view(hello_world)
11 app = config.make_wsgi_app()
12 server = make_server('0.0.0.0', 8080, app)
13 server.serve_forever()

Pyramid has over 1200 pages of documentation (printed), covering topics from the very basic to the most
advanced. Nothing is left undocumented, quite literally. It also has an awesome, very helpful community.
Visit the #pyramid IRC channel on freenode.net and see.

Hate Zope

I’m sorry you feel that way. The Zope brand has certainly taken its share of lumps over the years, and has
a reputation for being insular and mysterious. But the word ”Zope” is literally quite meaningless without
qualification. What part of Zope do you hate? ”Zope” is a brand, not a technology.

If it’s Zope2-the-web-framework, Pyramid is not that. The primary designers and developers of Pyramid,
if anyone, should know. We wrote Pyramid’s predecessor (repoze.bfg), in part, because we knew that
Zope 2 had usability issues and limitations. repoze.bfg (and now Pyramid) was written to address
these issues.

If it’s Zope3-the-web-framework, Pyramid is definitely not that. Making use of lots of Zope 3 technolo-
gies is territory already staked out by the Grok project. Save for the obvious fact that they’re both web
frameworks, Pyramid is very, very different than Grok. Grok exposes lots of Zope technologies to end
users. On the other hand, if you need to understand a Zope-only concept while using Pyramid, then we’ve
failed on some very basic axis.

42 Contents
The Pyramid Web Framework, Version 1.9.4

If it’s just the word Zope: this can only be guilt by association. Because a piece of software internally uses
some package named zope.foo, it doesn’t turn the piece of software that uses it into ”Zope”. There is
a lot of great software written that has the word Zope in its name. Zope is not some sort of monolithic
thing, and a lot of its software is usable externally. And while it’s not really the job of this document to
defend it, Zope has been around for over 10 years and has an incredibly large, active community. If you
don’t believe this, http://pypi-ranking.info/author is an eye-opening reality check.

Love Simplicity

Years of effort have gone into honing this package and its documentation to make it as simple as humanly
possible for developers to use. Everything is a tradeoff, of course, and people have their own ideas about
what ”simple” is. You may have a style difference if you believe Pyramid is complex. Its developers
obviously disagree.

Other Challenges

Other challenges are encouraged to be sent to the Pylons-devel maillist. We’ll try to address them by
considering a design change, or at very least via exposition here.

0.2 Tutorials

0.2.1 Quick Tour of Pyramid

Pyramid lets you start small and finish big. This Quick Tour of Pyramid is for those who want to evaluate
Pyramid, whether you are new to Python web frameworks, or a pro in a hurry. For more detailed treatment
of each topic, give the Quick Tutorial for Pyramid a try.

If you would prefer to cut and paste the example code in this tour you may browse the source code located
in the Pyramid repository in the directory ”docs/quick_tour” <https://github.com/Pylons/pyramid/>. If
you have downloaded the source code, you will find the tour in the same location.

0.2. Tutorials 43
The Pyramid Web Framework, Version 1.9.4

Installation

Once you have a standard Python environment setup, getting started with Pyramid is a breeze. Unfortu-
nately ”standard” is not so simple in Python. For this Quick Tour, it means Python, venv (or virtualenv for
Python 2.7), pip, and setuptools.

To save a little bit of typing and to be certain that we use the modules, scripts, and packages installed in
our virtual environment, we’ll set an environment variable, too.

As an example, for Python 3.6+ on Linux:

# set an environment variable to where you want your virtual␣


,→environment

$ export VENV=~/env
# create the virtual environment
$ python3 -m venv $VENV
# install pyramid
$ $VENV/bin/pip install pyramid
# or for a specific released version
$ $VENV/bin/pip install "pyramid==1.9.4"

For Windows:

# set an environment variable to where you want your virtual␣


,→environment

c:\> set VENV=c:\env


# create the virtual environment
c:\> python -m venv %VENV%
# install pyramid
c:\> %VENV%\Scripts\pip install pyramid
# or for a specific released version
c:\> %VENV%\Scripts\pip install "pyramid==1.9.4"

Of course Pyramid runs fine on Python 2.7+, as do the examples in this Quick Tour. We’re showing Python
3 for simplicity. (Pyramid had production support for Python 3 in October 2011.) Also for simplicity, the
remaining examples will show only UNIX commands.

See also:

See also: Quick Tutorial section on Requirements, Installing Pyramid on a UNIX System, Before You
Install, Why use $VENV/bin/pip instead of source bin/activate, then pip, and Installing Pyramid on a
Windows System.

44 Contents
The Pyramid Web Framework, Version 1.9.4

Hello World

Microframeworks have shown that learning starts best from a very small first step. Here’s a tiny application
in Pyramid:

1 from wsgiref.simple_server import make_server


2 from pyramid.config import Configurator
3 from pyramid.response import Response
4

6 def hello_world(request):
7 return Response('<h1>Hello World!</h1>')
8

10 if __name__ == '__main__':
11 with Configurator() as config:
12 config.add_route('hello', '/')
13 config.add_view(hello_world, route_name='hello')
14 app = config.make_wsgi_app()
15 server = make_server('0.0.0.0', 6543, app)
16 server.serve_forever()

This simple example is easy to run. Save this as app.py and run it:

$ $VENV/bin/python ./app.py

Next open http://localhost:6543/ in a browser, and you will see the Hello World! message.
New to Python web programming? If so, some lines in the module merit explanation:
1. Line 10. if __name__ == '__main__': is Python’s way of saying ”Start here when running
from the command line”.
2. Lines 11-13. Use Pyramid’s configurator in a context manager to connect view code to a particular
URL route.
3. Lines 6-7. Implement the view code that generates the response.
4. Lines 14-16. Publish a WSGI app using an HTTP server.
As shown in this example, the configurator plays a central role in Pyramid development. Building an
application from loosely-coupled parts via Application Configuration is a central idea in Pyramid, one that
we will revisit regurlarly in this Quick Tour.
See also:
See also: Quick Tutorial Hello World, Creating Your First Pyramid Application, and Todo List Application
in One File.

0.2. Tutorials 45
The Pyramid Web Framework, Version 1.9.4

Handling web requests and responses

Developing for the web means processing web requests. As this is a critical part of a web application, web
developers need a robust, mature set of software for web requests.

Pyramid has always fit nicely into the existing world of Python web development (virtual environments,
packaging, cookiecutters, one of the first to embrace Python 3, etc.). Pyramid turned to the well-
regarded WebOb Python library for request and response handling. In our example above, Pyramid hands
hello_world a request that is based on WebOb.

Let’s see some features of requests and responses in action:

def hello_world(request):
# Some parameters from a request such as /?name=lisa
url = request.url
name = request.params.get('name', 'No Name Provided')

body = 'URL %s with name: %s' % (url, name)


return Response(
content_type="text/plain",
body=body
)

In this Pyramid view, we get the URL being visited from request.url. Also if you visited http://
localhost:6543/?name=alice in a browser, the name is included in the body of the response:

URL http://localhost:6543/?name=alice with name: alice

Finally we set the response’s content type, and return the Response.

See also:

See also: Quick Tutorial Request and Response and Request and Response Objects.

Views

For the examples above, the hello_world function is a ”view”. In Pyramid views are the primary way
to accept web requests and return responses.

So far our examples place everything in one file:

46 Contents
The Pyramid Web Framework, Version 1.9.4

• the view function

• its registration with the configurator

• the route to map it to an URL

• the WSGI application launcher

Let’s move the views out to their own views.py module and change the app.py to scan that module,
looking for decorators that set up the views.

First our revised app.py:

1 from wsgiref.simple_server import make_server


2 from pyramid.config import Configurator
3

4 if __name__ == '__main__':
5 with Configurator() as config:
6 config.add_route('home', '/')
7 config.add_route('hello', '/howdy')
8 config.add_route('redirect', '/goto')
9 config.add_route('exception', '/problem')
10 config.scan('views')
11 app = config.make_wsgi_app()
12 server = make_server('0.0.0.0', 6543, app)
13 server.serve_forever()

We added some more routes, but we also removed the view code. Our views and their registrations (via
decorators) are now in a module views.py, which is scanned via config.scan('views').

We now have a views.py module that is focused on handling requests and responses:

1 from pyramid.compat import escape


2

3 from pyramid.httpexceptions import HTTPFound


4 from pyramid.response import Response
5 from pyramid.view import view_config
6

8 # First view, available at http://localhost:6543/


9 @view_config(route_name='home')
(continues on next page)

0.2. Tutorials 47
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


10 def home_view(request):
11 return Response('<p>Visit <a href="/howdy?name=lisa">hello</a></
,→p>')

12

13

14 # /howdy?name=alice which links to the next view


15 @view_config(route_name='hello')
16 def hello_view(request):
17 name = request.params.get('name', 'No Name')
18 body = '<p>Hi %s, this <a href="/goto">redirects</a></p>'
19 # pyramid.compat.escape to prevent Cross-Site Scripting (XSS)␣
,→[CWE 79]

20 return Response(body % escape(name))


21

22

23 # /goto which issues HTTP redirect to the last view


24 @view_config(route_name='redirect')
25 def redirect_view(request):
26 return HTTPFound(location="/problem")
27

28

29 # /problem which causes a site error


30 @view_config(route_name='exception')
31 def exception_view(request):
32 raise Exception()

We have four views, each leading to the other. If you start at http://localhost:6543/, you get a response
with a link to the next view. The hello_view (available at the URL /howdy) has a link to the
redirect_view, which issues a redirect to the final view.

Earlier we saw config.add_view as one way to configure a view. This section introduces
@view_config. Pyramid’s configuration supports imperative configuration, such as the config.
add_view in the previous example. You can also use declarative configuration in which a Python dec-
orator is placed on the line above the view. Both approaches result in the same final configuration, thus
usually it is simply a matter of taste.

See also:

See also: Quick Tutorial Views, Views, View Configuration, and Debugging View Configuration.

48 Contents
The Pyramid Web Framework, Version 1.9.4

Routing

Writing web applications usually means sophisticated URL design. We just saw some Pyramid machinery
for requests and views. Let’s look at features that help with routing.

Above we saw the basics of routing URLs to views in Pyramid:

• Your project’s ”setup” code registers a route name to be used when matching part of the URL.

• Elsewhere a view is configured to be called for that route name.

Why do this twice? Other Python web frameworks let you create a route and associate it with a view
in one step. As illustrated in Routes need relative ordering, multiple routes might match the same URL
pattern. Rather than provide ways to help guess, Pyramid lets you be explicit in ordering. Pyramid also
gives facilities to avoid the problem.

What if we want part of the URL to be available as data in my view? We can use this route declaration,
for example:

6 config.add_route('hello', '/howdy/{first}/{last}')

With this, URLs such as /howdy/amy/smith will assign amy to first and smith to last. We
can then use this data in our view:

5 @view_config(route_name='hello')
6 def hello_world(request):
7 body = '<h1>Hi %(first)s %(last)s!</h1>' % request.matchdict
8 return Response(body)

request.matchdict contains values from the URL that match the ”replacement patterns” (the curly
braces) in the route declaration. This information can then be used in your view.

See also:

See also: Quick Tutorial Routing, URL Dispatch, Debugging Route Matching, and Request Processing.

0.2. Tutorials 49
The Pyramid Web Framework, Version 1.9.4

Templating

Ouch. We have been making our own Response and filling the response body with HTML. You usually
won’t embed an HTML string directly in Python, but instead you will use a templating language.

Pyramid doesn’t mandate a particular database system, form library, and so on. It encourages replaceabil-
ity. This applies equally to templating, which is fortunate: developers have strong views about template
languages. That said, the Pylons Project officially supports bindings for Chameleon, Jinja2, and Mako. In
this step let’s use Chameleon.

Let’s add pyramid_chameleon, a Pyramid add-on which enables Chameleon as a renderer in our
Pyramid application:

$ $VENV/bin/pip install pyramid_chameleon

With the package installed, we can include the template bindings into our configuration in app.py:

6 config.add_route('hello', '/howdy/{name}')
7 config.include('pyramid_chameleon')
8 config.scan('views')

Now lets change our views.py file:

1 from pyramid.view import view_config


2

4 @view_config(route_name='hello', renderer='hello_world.pt')
5 def hello_world(request):
6 return dict(name=request.matchdict['name'])

Ahh, that looks better. We have a view that is focused on Python code. Our @view_config decorator
specifies a renderer that points to our template file. Our view then simply returns data which is then
supplied to our template hello_world.pt:

<!DOCTYPE html>
<html lang="en">
<head>
<title>Quick Glance</title>
</head>
(continues on next page)

50 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


<body>
<h1>Hello ${name}</h1>
</body>
</html>

Since our view returned dict(name=request.matchdict['name']), we can use name as a


variable in our template via ${name}.

See also:

See also: Quick Tutorial Templating, Templates, Debugging Templates, and Available Add-On Template
System Bindings.

Templating with Jinja2

We just said Pyramid doesn’t prefer one templating language over another. Time to prove it. Jinja2 is a
popular templating system, modeled after Django’s templates. Let’s add pyramid_jinja2, a Pyramid
add-on which enables Jinja2 as a renderer in our Pyramid applications:

$ $VENV/bin/pip install pyramid_jinja2

With the package installed, we can include the template bindings into our configuration:

6 config.add_route('hello', '/howdy/{name}')
7 config.include('pyramid_jinja2')
8 config.scan('views')

The only change in our view is to point the renderer at the .jinja2 file:

4 @view_config(route_name='hello', renderer='hello_world.jinja2')
5 def hello_world(request):
6 return dict(name=request.matchdict['name'])

Our Jinja2 template is very similar to our previous template:

0.2. Tutorials 51
The Pyramid Web Framework, Version 1.9.4

<!DOCTYPE html>
<html lang="en">
<head>
<title>Hello World</title>
</head>
<body>
<h1>Hello {{ name }}!</h1>
</body>
</html>

Pyramid’s templating add-ons register a new kind of renderer into your application. The renderer regis-
tration maps to different kinds of filename extensions. In this case, changing the extension from .pt to
.jinja2 passed the view response through the pyramid_jinja2 renderer.

See also:

See also: Quick Tutorial Jinja2, Jinja2 homepage, and pyramid_jinja2 Overview.

Static assets

Of course the Web is more than just markup. You need static assets: CSS, JS, and images. Let’s point our
web app at a directory from which Pyramid will serve some static assets. First let’s make another call to
the configurator in app.py:

6 config.add_route('hello', '/howdy/{name}')
7 config.add_static_view(name='static', path='static')
8 config.include('pyramid_jinja2')

This tells our WSGI application to map requests under http://localhost:6543/static/ to files and directories
inside a static directory alongside our Python module.

Next make a directory named static, and place app.css inside:

body {
margin: 2em;
font-family: sans-serif;
}

All we need to do now is point to it in the <head> of our Jinja2 template, hello_world.jinja2:

52 Contents
The Pyramid Web Framework, Version 1.9.4

4 <title>Hello World</title>
5 <link rel="stylesheet" href="/static/app.css"/>
6 </head>

This link presumes that our CSS is at a URL starting with /static/. What if the site is later moved
under /somesite/static/? Or perhaps a web developer changes the arrangement on disk? Pyramid
provides a helper to allow flexibility on URL generation:

4 <title>Hello World</title>
5 <link rel="stylesheet" href="{{ request.static_url('__main__
,→:static/app.css') }}"/>

6 </head>

By using request.static_url to generate the full URL to the static assets, you ensure that you stay
in sync with the configuration and gain refactoring flexibility later.

See also:

See also: Quick Tutorial Static Assets, Static Assets, Preventing HTTP Caching, and Influencing HTTP
Caching.

Returning JSON

Modern web apps are more than rendered HTML. Dynamic pages now use JavaScript to update the UI in
the browser by requesting server data as JSON. Pyramid supports this with a JSON renderer:

9 @view_config(route_name='hello_json', renderer='json')
10 def hello_json(request):
11 return [1, 2, 3]

This wires up a view that returns some data through the JSON renderer, which calls Python’s JSON support
to serialize the data into JSON, and sets the appropriate HTTP headers.

We also need to add a route to app.py so that our app will know how to respond to a request for hello.
json.

0.2. Tutorials 53
The Pyramid Web Framework, Version 1.9.4

6 config.add_route('hello', '/howdy/{name}')
7 config.add_route('hello_json', 'hello.json')
8 config.add_static_view(name='static', path='static')

See also:

See also: Quick Tutorial JSON, Writing View Callables Which Use a Renderer, JSON Renderer, and
Adding and Changing Renderers.

View classes

So far our views have been simple, free-standing functions. Many times your views are related. They may
have different ways to look at or work on the same data, or they may be a REST API that handles multiple
operations. Grouping these together as a view class makes sense and achieves the following goals.

• Group views

• Centralize some repetitive defaults

• Share some state and helpers

The following shows a ”Hello World” example with three operations: view a form, save a change, or press
the delete button in our views.py:

7 # One route, at /howdy/amy, so don't repeat on each @view_config


8 @view_defaults(route_name='hello')
9 class HelloWorldViews:
10 def __init__(self, request):
11 self.request = request
12 # Our templates can now say {{ view.name }}
13 self.name = request.matchdict['name']
14

15 # Retrieving /howdy/amy the first time


16 @view_config(renderer='hello.jinja2')
17 def hello_view(self):
18 return dict()
19

20 # Posting to /howdy/amy via the "Edit" submit button


21 @view_config(request_param='form.edit', renderer='edit.jinja2')
(continues on next page)

54 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


22 def edit_view(self):
23 print('Edited')
24 return dict()
25

26 # Posting to /howdy/amy via the "Delete" submit button


27 @view_config(request_param='form.delete', renderer='delete.
,→jinja2')

28 def delete_view(self):
29 print('Deleted')
30 return dict()

As you can see, the three views are logically grouped together. Specifically:

• The first view is returned when you go to /howdy/amy. This URL is mapped to the hello route
that we centrally set using the optional @view_defaults.

• The second view is returned when the form data contains a field with form.edit, such as clicking
on <input type="submit" name="form.edit" value="Save">. This rule is spec-
ified in the @view_config for that view.

• The third view is returned when clicking on a button such as <input type="submit"
name="form.delete" value="Delete">.

Only one route is needed, stated in one place atop the view class. Also, the assignment of name is done
in the __init__ function. Our templates can then use {{ view.name }}.

Pyramid view classes, combined with built-in and custom predicates, have much more to offer:

• All the same view configuration parameters as function views

• One route leading to multiple views, based on information in the request or data such
as request_param, request_method, accept, header, xhr, containment, and
custom_predicates

See also:

See also: Quick Tutorial View Classes, Quick Tutorial More View Classes, and Defining a View Callable
as a Class.

0.2. Tutorials 55
The Pyramid Web Framework, Version 1.9.4

Quick project startup with cookiecutters

So far we have done all of our Quick Tour as a single Python file. No Python packages, no structure. Most
Pyramid projects, though, aren’t developed this way.

To ease the process of getting started, the Pylons Project provides cookiecutters that generate sample Pyra-
mid projects from project templates. These cookiecutters will install Pyramid and its dependencies as well.

First you’ll need to install cookiecutter.

$ $VENV/bin/pip install cookiecutter

Let’s use the cookiecutter pyramid-cookiecutter-starter to create a starter Pyramid project in


the current directory, entering values at the prompts as shown below for the following command.

$ $VENV/bin/cookiecutter gh:Pylons/pyramid-cookiecutter-starter --
,→checkout 1.9-branch

If prompted for the first item, accept the default yes by hitting return.

You've cloned ~/.cookiecutters/pyramid-cookiecutter-starter before.


Is it okay to delete and re-clone it? [yes]: yes
project_name [Pyramid Scaffold]: hello_world
repo_name [hello_world]: hello_world
Select template_language:
1 - jinja2
2 - chameleon
3 - mako
Choose from 1, 2, 3 [1]: 1

We then run through the following commands.

# Change directory into your newly created project.


$ cd hello_world
# Create a new virtual environment...
$ python3 -m venv env
# ...where we upgrade packaging tools...
$ env/bin/pip install --upgrade pip setuptools
# ...and into which we install our project and its testing␣
,→requirements.

(continues on next page)

56 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


$ env/bin/pip install -e ".[testing]"
# Reset our environment variable for a new virtual environment.
$ export VENV=~/hello_world/env

We are moving in the direction of a full-featured Pyramid project, with a proper setup for Python standards
(packaging) and Pyramid configuration. This includes a new way of running your application:

$ $VENV/bin/pserve development.ini

Let’s look at pserve and configuration in more depth.


See also:
See also: Quick Tutorial Cookiecutters, Creating a Pyramid Project, and Pyramid cookiecutters

Application running with pserve

Prior to the cookiecutter, our project mixed a number of operational details into our code. Why should my
main code care which HTTP server I want and what port number to run on?
pserve is Pyramid’s application runner, separating operational details from your code. When you install
Pyramid, a small command program called pserve is written to your bin directory. This program is an
executable Python module. It’s very small, getting most of its brains via import.
You can run pserve with --help to see some of its options. Doing so reveals that you can ask pserve
to watch your development files and reload the server when they change:

$ $VENV/bin/pserve development.ini --reload

The pserve command has a number of other options and operations. Most of the work, though, comes
from your project’s wiring, as expressed in the configuration file you supply to pserve. Let’s take a look
at this configuration file.
See also:
See also: What Is This pserve Thing

Configuration with .ini files

Earlier in Quick Tour we first met Pyramid’s configuration system. At that point we did all configuration
in Python code. For example, the port number chosen for our HTTP server was right there in Python code.
Our cookiecutter has moved this decision and more into the development.ini file:

0.2. Tutorials 57
The Pyramid Web Framework, Version 1.9.4

###
# app configuration
# https://docs.pylonsproject.org/projects/pyramid/en/latest/narr/
,→environment.html

###

[app:main]
use = egg:hello_world

pyramid.reload_templates = true
pyramid.debug_authorization = false
pyramid.debug_notfound = false
pyramid.debug_routematch = false
pyramid.default_locale_name = en
pyramid.includes =
pyramid_debugtoolbar

# By default, the toolbar only appears for clients from IP addresses


# '127.0.0.1' and '::1'.
# debugtoolbar.hosts = 127.0.0.1 ::1

###
# wsgi server configuration
###

[server:main]
use = egg:waitress#main
listen = localhost:6543

###
# logging configuration
# https://docs.pylonsproject.org/projects/pyramid/en/latest/narr/
,→logging.html

###

[loggers]
keys = root, hello_world

[handlers]
keys = console

[formatters]
(continues on next page)

58 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


keys = generic

[logger_root]
level = INFO
handlers = console

[logger_hello_world]
level = DEBUG
handlers =
qualname = hello_world

[handler_console]
class = StreamHandler
args = (sys.stderr,)
level = NOTSET
formatter = generic

[formatter_generic]
format = %(asctime)s %(levelname)-5.5s [%(name)s:%(lineno)s][
,→%(threadName)s] %(message)s

Let’s take a quick high-level look. First the .ini file is divided into sections:

• [app:main] configures our WSGI app

• [server:main] holds our WSGI server settings

• Various sections afterwards configure our Python logging system

We have a few decisions made for us in this configuration:

1. WSGI app: What package has our WSGI application in it? use = egg:hello_world in the
app section tells the configuration what application to load.

2. Easier development by automatic template reloading: In development mode, you shouldn’t have
to restart the server when editing a Jinja2 template. pyramid.reload_templates = true
sets this policy, which might be different in production.

3. Choice of web server: use = egg:waitress#main tells pserve to use the waitress
server.

0.2. Tutorials 59
The Pyramid Web Framework, Version 1.9.4

4. Interfaces: listen = localhost:6543 tells waitress to listen on all interfaces on port


6543 for both IPv4 and IPv6.

Additionally the development.ini generated by this cookiecutter wired up Python’s standard logging.
We’ll now see in the console, for example, a log on every request that comes in, as well as traceback
information.

See also:

See also: Quick Tutorial Application Configuration, Environment Variables and .ini File Settings and
PasteDeploy Configuration Files

Easier development with debugtoolbar

As we introduce the basics, we also want to show how to be productive in development and debugging. For
example, we just discussed template reloading and earlier we showed --reload for application reloading.

pyramid_debugtoolbar is a popular Pyramid add-on which makes several tools available in your
browser. Adding it to your project illustrates several points about configuration.

The cookiecutter pyramid-cookiecutter-starter already configured our package to include the


add-on pyramid_debugtoolbar in its setup.py:

11 requires = [
12 'plaster_pastedeploy',
13 'pyramid',
14 'pyramid_jinja2',
15 'pyramid_debugtoolbar',
16 'waitress',
17 ]

It was installed when you previously ran:

$ $VENV/bin/pip install -e ".[testing]"

The pyramid_debugtoolbar package is a Pyramid add-on, which means we need to include


its configuration into our web application. The cookiecutter already took care of this for us in its
development.ini using the pyramid.includes facility:

60 Contents
The Pyramid Web Framework, Version 1.9.4

14 pyramid.includes =
15 pyramid_debugtoolbar

You’ll now see a Pyramid logo on the right side of your browser window, which when clicked opens a new
window that provides introspective access to debugging information. Even better, if your web application
generates an error, you will see a nice traceback on the screen. When you want to disable this toolbar,
there’s no need to change code: you can remove it from pyramid.includes in the relevant .ini
configuration file.

See also:

See also: Quick Tutorial pyramid_debugtoolbar and pyramid_debugtoolbar

Unit tests and py.test

Yikes! We got this far and we haven’t yet discussed tests. This is particularly egregious, as Pyramid has
had a deep commitment to full test coverage since before its release.

Our pyramid-cookiecutter-starter cookiecutter generated a tests.py module with one unit


test and one functional test in it. It also configured setup.py with test requirements: py.test as the
test runner, WebTest for running view tests, and the pytest-cov tool which yells at us for code that
isn’t tested:

19 tests_require = [
20 'WebTest >= 1.3.1', # py3 compat
21 'pytest',
22 'pytest-cov',
23 ]

43 extras_require={
44 'testing': tests_require,
45 },

We already installed the test requirements when we ran the command $VENV/bin/pip install -e
".[testing]". We can now run all our tests:

$ $VENV/bin/py.test --cov --cov-report=term-missing

This yields the following output.

0.2. Tutorials 61
The Pyramid Web Framework, Version 1.9.4

=========================== test session starts␣


,→===========================

platform darwin -- Python 3.6.0, pytest-3.0.5, py-1.4.32, pluggy-0.


,→4.0

rootdir: /Users/stevepiercy/hello_world, inifile: pytest.ini


plugins: cov-2.4.0
collected 2 items

hello_world/tests.py ..

------------- coverage: platform darwin, python 3.6.0-final-0 ------


,→-------

Name Stmts Miss Cover ␣


,→Missing

--------------------------------------------------------------------
,→---

hello_world/__init__.py 8 0 100%
hello_world/views.py 3 0 100%
--------------------------------------------------------------------
,→---

TOTAL 11 0 100%

========================= 2 passed in 1.37 seconds␣


,→=========================

Our tests passed, and its coverage is complete. What did our test look like?

1 import unittest
2

3 from pyramid import testing


4

6 class ViewTests(unittest.TestCase):
7 def setUp(self):
8 self.config = testing.setUp()
9

10 def tearDown(self):
11 testing.tearDown()
12

13 def test_my_view(self):
(continues on next page)

62 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


14 from .views import my_view
15 request = testing.DummyRequest()
16 info = my_view(request)
17 self.assertEqual(info['project'], 'hello_world')
18

19

20 class FunctionalTests(unittest.TestCase):
21 def setUp(self):
22 from hello_world import main
23 app = main({})
24 from webtest import TestApp
25 self.testapp = TestApp(app)
26

27 def test_root(self):
28 res = self.testapp.get('/', status=200)
29 self.assertTrue(b'Pyramid' in res.body)

Pyramid supplies helpers for test writing, which we use in the test setup and teardown. Our first test imports
the view, makes a dummy request, and sees if the view returns what we expected. Our second test verifies
that the response body from a request to the web root contains what we expected.

See also:

See also: Quick Tutorial Unit Testing, Quick Tutorial Functional Testing, and Unit, Integration, and Func-
tional Testing

Logging

It’s important to know what is going on inside our web application. In development we might need to
collect some output. In production we might need to detect situations when other people use the site. We
need logging.

Fortunately Pyramid uses the normal Python approach to logging. The development.ini file for your
project has a number of lines that configure the logging for you to some reasonable defaults. You then see
messages sent by Pyramid (for example, when a new request comes in).

Maybe you would like to log messages in your code? In your Python module, import and set up the logging
in your views.py:

0.2. Tutorials 63
The Pyramid Web Framework, Version 1.9.4

3 import logging
4 log = logging.getLogger(__name__)

You can now, in your code, log messages:

7 def my_view(request):
8 log.debug('Some Message')

This will log Some Message at a DEBUG log level to the application-configured logger in your
development.ini. What controls that? These emphasized sections in the configuration file:

34 [loggers]
35 keys = root, hello_world
36

37 [handlers]
38 keys = console
39

40 [formatters]
41 keys = generic
42

43 [logger_root]
44 level = INFO
45 handlers = console
46

47 [logger_hello_world]
48 level = DEBUG
49 handlers =
50 qualname = hello_world

Our application, a package named hello_world, is set up as a logger and configured to log messages
at a DEBUG or higher level. When you visit http://localhost:6543, your console will now show:

2016-12-25 03:03:57,059 DEBUG [hello_world.views:8][waitress] Some␣


,→Message

See also:

See also: Quick Tutorial Logging and Logging.

64 Contents
The Pyramid Web Framework, Version 1.9.4

Sessions

When people use your web application, they frequently perform a task that requires semi-permanent data
to be saved. For example, a shopping cart. This is called a session.

Pyramid has basic built-in support for sessions. Third party packages such as
pyramid_redis_sessions provide richer session support. Or you can create your own cus-
tom sessioning engine. Let’s take a look at the built-in sessioning support. In our __init__.py we
first import the kind of sessioning we want:

1 from pyramid.config import Configurator


2 from pyramid.session import SignedCookieSessionFactory

As noted in the session docs, this example implementation is not intended for use in settings with
security implications.

Now make a ”factory” and pass it to the configurator’s session_factory argument:

10 config.add_route('home', '/')
11 my_session_factory = SignedCookieSessionFactory('itsaseekreet')
12 config.set_session_factory(my_session_factory)
13 config.scan()

Pyramid’s request object now has a session attribute that we can use in our view code in views.py:

7 def my_view(request):
8 log.debug('Some Message')
9 session = request.session
10 if 'counter' in session:
11 session['counter'] += 1
12 else:
13 session['counter'] = 0
14 return {'project': 'hello_world'}

We need to update our Jinja2 template templates/mytemplate.jinja2 to show counter increment


in the session:

0.2. Tutorials 65
The Pyramid Web Framework, Version 1.9.4

4 <div class="content">
5 <h1><span class="font-semi-bold">Pyramid</span> <span class=
,→"smaller">Starter project</span></h1>

6 <p class="lead">Welcome to <span class="font-normal">hello_world</


,→span>, a&nbsp;Pyramid application generated&nbsp;by<br><span␣

,→class="font-normal">Cookiecutter</span>.</p>

7 <p>Counter: {{ request.session.counter }}</p>


8 </div>

See also:

See also: Quick Tutorial Sessions, Sessions, Flash Messages, pyramid.session, and pyra-
mid_redis_sessions.

Databases

Web applications mean data. Data means databases. Frequently SQL databases. SQL databases fre-
quently mean an ”ORM” (object-relational mapper.) In Python, ORM usually leads to the mega-quality
SQLAlchemy, a Python package that greatly eases working with databases.

Pyramid and SQLAlchemy are great friends. That friendship includes a cookiecutter!

$ cd ~
$ env/bin/cookiecutter gh:Pylons/pyramid-cookiecutter-alchemy --
,→checkout 1.9-branch

If prompted for the first item, accept the default yes by hitting return.

You've cloned ~/.cookiecutters/pyramid-cookiecutter-alchemy before.


Is it okay to delete and re-clone it? [yes]: yes
project_name [Pyramid Scaffold]: sqla_demo
repo_name [sqla_demo]: sqla_demo

We then run through the following commands as before.

66 Contents
The Pyramid Web Framework, Version 1.9.4

# Change directory into your newly created project.


$ cd sqla_demo
# Create a new virtual environment...
$ python3 -m venv env
# ...where we upgrade packaging tools...
$ env/bin/pip install --upgrade pip setuptools
# ...and into which we install our project and its testing␣
,→requirements.

$ env/bin/pip install -e ".[testing]"


# Reset our environment variable for a new virtual environment.
$ export VENV=~/sqla_demo/env

We now have a working sample SQLAlchemy application with all dependencies installed. The sample
project provides a console script to initialize a SQLite database with tables. Let’s run it, then start the
application:

$ $VENV/bin/initialize_sqla_demo_db development.ini
$ $VENV/bin/pserve development.ini

The ORM eases the mapping of database structures into a programming language. SQLAlchemy uses
”models” for this mapping. The cookiecutter generated a sample model:

11 class MyModel(Base):
12 __tablename__ = 'models'
13 id = Column(Integer, primary_key=True)
14 name = Column(Text)
15 value = Column(Integer)

View code, which mediates the logic between web requests and the rest of the system, can then easily get
at the data thanks to SQLAlchemy:

13 one = query.filter(MyModel.name == 'one').first()

See also:

See also: Quick Tutorial Databases, SQLAlchemy, Making Your Script into a Console Script,
SQLAlchemy + URL dispatch wiki tutorial, and Application Transactions with pyramid_tm.

0.2. Tutorials 67
The Pyramid Web Framework, Version 1.9.4

Forms

Developers have lots of opinions about web forms, thus there are many form libraries for Python. Pyramid
doesn’t directly bundle a form library, but Deform is a popular choice for forms, along with its related
Colander schema system.

As an example, imagine we want a form that edits a wiki page. The form should have two fields on it, one
of them a required title and the other a rich text editor for the body. With Deform we can express this as a
Colander schema:

class WikiPage(colander.MappingSchema):
title = colander.SchemaNode(colander.String())
body = colander.SchemaNode(
colander.String(),
widget=deform.widget.RichTextWidget()
)

With this in place, we can render the HTML for a form, perhaps with form data from an existing page:

form = self.wiki_form.render()

We’d like to handle form submission, validation, and saving:

# Get the form data that was posted


controls = self.request.POST.items()
try:
# Validate and either raise a validation error
# or return deserialized data from widgets
appstruct = wiki_form.validate(controls)
except deform.ValidationFailure as e:
# Bail out and render form with errors
return dict(title=title, page=page, form=e.render())

# Change the content and redirect to the view


page['title'] = appstruct['title']
page['body'] = appstruct['body']

Deform and Colander provide a very flexible combination for forms, widgets, schemas, and validation.
Recent versions of Deform also include a retail mode for gaining Deform features on custom forms.

68 Contents
The Pyramid Web Framework, Version 1.9.4

Deform uses attractive CSS from Twitter Bootstrap and more powerful select, checkbox, and date and time
widgets.

See also:

See also: Quick Tutorial Forms, Deform, and Colander.

Conclusion

This Quick Tour covered a little about a lot. We introduced a long list of concepts in Pyramid, many of
which are expanded on more fully in the Pyramid developer docs.

0.2.2 Quick Tutorial for Pyramid

Pyramid is a web framework for Python 2 and 3. This tutorial gives a Python 3/2-compatible, high-level
tour of the major features.

This hands-on tutorial covers ”a little about a lot”: practical introductions to the most common facilities.
Fun, fast-paced, and most certainly not aimed at experts of the Pyramid web framework.

Contents

Requirements

Let’s get our tutorial environment set up. Most of the set up work is in standard Python development
practices (install Python and make an isolated virtual environment.)

Pyramid encourages standard Python development practices with packaging tools, virtual environ-
ments, logging, and so on. There are many variations, implementations, and opinions across the Python
community. For consistency, ease of documentation maintenance, and to minimize confusion, the Pyramid
documentation has adopted specific conventions that are consistent with the Python Packaging Authority.

This Quick Tutorial is based on:

0.2. Tutorials 69
The Pyramid Web Framework, Version 1.9.4

• Python 3.6. Pyramid fully supports Python 3.4+ and Python 2.7+. This tutorial uses Python 3.6
but runs fine under Python 2.7.

• venv. We believe in virtual environments. For this tutorial, we use Python 3.6’s built-in solution
venv. For Python 2.7, you can install virtualenv.

• pip. We use pip for package management.

• Workspaces, projects, and packages. Our home directory will contain a tutorial workspace with
our Python virtual environment and Python projects (a directory with packaging information and
Python packages of working code.)

• Unix commands. Commands in this tutorial use UNIX syntax and paths. Windows users should
adjust commands accordingly.

Pyramid was one of the first web frameworks to fully support Python 3 in October 2011.

Windows commands use the plain old MSDOS shell. For PowerShell command syntax, see its
documentation.

Steps

1. Install Python 3

2. Create a project directory structure

3. Set an environment variable

4. Create a virtual environment

5. Install Pyramid

70 Contents
The Pyramid Web Framework, Version 1.9.4

Install Python 3

See the detailed recommendation for your operating system described under Installing Pyramid.

• For Mac OS X Users

• If You Don’t Yet Have a Python Interpreter (UNIX)

• If You Don’t Yet Have a Python Interpreter (Windows)

Create a project directory structure

We will arrive at a directory structure of workspace -> project -> package, where our
workspace is named quick_tutorial. The following tree diagram shows how this will be structured,
and where our virtual environment will reside as we proceed through the tutorial:

`── ~
`── projects
`── quick_tutorial
│── env
`── step_one
│── intro
│ │── __init__.py
│ `── app.py
`── setup.py

For Linux, the commands to do so are as follows:

# Mac and Linux


$ cd ~
$ mkdir -p projects/quick_tutorial
$ cd projects/quick_tutorial

For Windows:

# Windows
c:\> cd \
c:\> mkdir projects\quick_tutorial
c:\> cd projects\quick_tutorial

0.2. Tutorials 71
The Pyramid Web Framework, Version 1.9.4

In the above figure, your user home directory is represented by ~. In your home directory, all of your
projects are in the projects directory. This is a general convention not specific to Pyramid that many
developers use. Windows users will do well to use c:\ as the location for projects in order to avoid
spaces in any of the path names.

Next within projects is your workspace directory, here named quick_tutorial. A workspace is
a common term used by integrated development environments (IDE), like PyCharm and PyDev, where
virtual environments, specific project files, and repositories are stored.

Set an environment variable

This tutorial will refer frequently to the location of the virtual environment. We set an environment variable
to save typing later.

# Mac and Linux


$ export VENV=~/projects/quick_tutorial/env

# Windows
c:\> set VENV=c:\projects\quick_tutorial\env

Create a virtual environment

venv is a tool to create isolated Python 3 environments, each with its own Python binary and independent
set of installed Python packages in its site directories. Let’s create one, using the location we just specified
in the environment variable.

# Mac and Linux


$ python3 -m venv $VENV

# Windows
c:\> python -m venv %VENV%

See also:

See also Python 3’s venv module and Python 2’s virtualenv package.

72 Contents
The Pyramid Web Framework, Version 1.9.4

Update packaging tools in the virtual environment

It’s always a good idea to update to the very latest version of packaging tools because the installed Python
bundles only the version that was available at the time of its release.

# Mac and Linux


$ $VENV/bin/pip install --upgrade pip setuptools

# Windows
c:\> %VENV%\Scripts\pip install --upgrade pip setuptools

See also:

See also Why use $VENV/bin/pip instead of source bin/activate, then pip.

Install Pyramid

We have our Python standard prerequisites out of the way. The Pyramid part is pretty easy. We’ll also
install a WSGI server, Waitress.

# Mac and Linux


$ $VENV/bin/pip install "pyramid==1.9.4" waitress

# Windows
c:\> %VENV%\Scripts\pip install "pyramid==1.9.4" waitress

Our Python virtual environment now has the Pyramid software available as well as the waitress pack-
age.

Tutorial Approach

This tutorial uses conventions to keep the introduction focused and concise. Details, references, and deeper
discussions are mentioned in ”See also” notes.

See also:

This is an example ”See also” note.

0.2. Tutorials 73
The Pyramid Web Framework, Version 1.9.4

Directory tree

This ”Getting Started” tutorial is broken into independent steps, starting with the smallest possible ”single
file WSGI app” example. Each of these steps introduces a topic and a very small set of concepts via
working code. The steps each correspond to a directory in our workspace, where each step’s directory is
a Python package. Source code used in this tutorial is located in the Pyramid repository in the directory
”docs/quick_tutorial”. You may git clone the repository, download, or copy-paste the source code. If
you do so, then make sure you use the same branch as this documentation.

As we develop our tutorial, our directory tree will resemble the structure below:

quick_tutorial
│── env
`── request_response
`── tutorial
│ │── __init__.py
│ │── tests.py
│ `── views.py
│── development.ini
`── setup.py

Each of the directories in our quick_tutorial workspace (e.g., request_response) is a Python


project (except as noted for the hello_world step). The tutorial directory is a Python package.

For most steps you will copy the previous step’s directory to a new directory, and change your working
directory to the new directory, then install your project:

$ cd ..; cp -r package ini; cd ini


$ $VENV/bin/pip install -e .

For a few steps, you won’t copy the previous step’s directory, but you will still need to install your project
with $VENV/bin/pip install -e ..

Prelude: Quick Project Startup with Cookiecutters

To ease the process of getting started on a project, the Pylons Project provides cookiecutters that generate
sample Pyramid projects from project templates. These cookiecutters will install Pyramid and its depen-
dencies as well. We will still cover many topics of web application development using Pyramid, but it’s
good to know of this facility. This prelude will demonstrate how to get a working Pyramid web application
running via cookiecutter.

74 Contents
The Pyramid Web Framework, Version 1.9.4

Objectives

• Use a cookiecutter to make a new project.

• Start up a Pyramid application and visit it in a web browser.

Steps

1. Install cookiecutter into your virtual environment.

$VENV/bin/pip install cookiecutter

2. Let’s use the cookiecutter pyramid-cookiecutter-starter to create a starter Pyramid


project in the current directory, entering values at the prompts as shown below for the following
command.

$ $VENV/bin/cookiecutter gh:Pylons/pyramid-cookiecutter-starter␣
,→--checkout 1.9-branch

If prompted for the first item, accept the default yes by hitting return.

You've cloned ~/.cookiecutters/pyramid-cookiecutter-starter␣


,→before.

Is it okay to delete and re-clone it? [yes]: yes


project_name [Pyramid Scaffold]: cc_starter
repo_name [cc_starter]: cc_starter
Select template_language:
1 - jinja2
2 - chameleon
3 - mako
Choose from 1, 2, 3 [1]: 1

3. We then run through the following commands.

0.2. Tutorials 75
The Pyramid Web Framework, Version 1.9.4

# Change directory into your newly created project.


$ cd cc_starter
# Create a new virtual environment...
$ python3 -m venv env
# ...where we upgrade packaging tools...
$ env/bin/pip install --upgrade pip setuptools
# ...and into which we install our project.
$ env/bin/pip install -e .

4. Start up the application by pointing Pyramid’s pserve command at the project’s (generated) con-
figuration file:

$ env/bin/pserve development.ini --reload

On start up, pserve logs some output:

Starting subprocess with file monitor


Starting server in PID 73732.
Serving on http://localhost:6543
Serving on http://localhost:6543

5. Open http://localhost:6543/ in your browser.

Analysis

Rather than starting from scratch, a cookiecutter can make it easy to get a Python project containing a
working Pyramid application. The Pylons Project provides several cookiecutters.

pserve is Pyramid’s application runner, separating operational details from your code. When you install
Pyramid, a small command program called pserve is written to your bin directory. This program is an
executable Python module. It is passed a configuration file (in this case, development.ini).

01: Single-File Web Applications

What’s the simplest way to get started in Pyramid? A single-file module. No Python packages, no pip
install -e ., no other machinery.

76 Contents
The Pyramid Web Framework, Version 1.9.4

Background

Microframeworks were all the rage, until the next shiny thing came along. ”Microframework” is a mar-
keting term, not a technical one. They have a low mental overhead: they do so little, the only things you
have to worry about are your things.

Pyramid is special because it can act as a single-file module microframework. You can have a single Python
file that can be executed directly by Python. But Pyramid also provides facilities to scale to the largest of
applications.

Python has a standard called WSGI that defines how Python web applications plug into standard servers,
getting passed incoming requests, and returning responses. Most modern Python web frameworks obey an
”MVC” (model-view-controller) application pattern, where the data in the model has a view that mediates
interaction with outside systems.

In this step we’ll see a brief glimpse of WSGI servers, WSGI applications, requests, responses, and views.

Objectives

• Get a running Pyramid web application, as simply as possible.

• Use that as a well-understood base for adding each unit of complexity.

• Initial exposure to WSGI apps, requests, views, and responses.

Steps

1. Make sure you have followed the steps in Requirements.

2. Starting from your workspace directory (~/projects/quick_tutorial), create a directory


for this step:

$ cd ~/projects/quick_tutorial; mkdir hello_world; cd hello_


,→world

3. Copy the following into hello_world/app.py:

0.2. Tutorials 77
The Pyramid Web Framework, Version 1.9.4

1 from waitress import serve


2 from pyramid.config import Configurator
3 from pyramid.response import Response
4

6 def hello_world(request):
7 print('Incoming request')
8 return Response('<body><h1>Hello World!</h1></body>')
9

10

11 if __name__ == '__main__':
12 with Configurator() as config:
13 config.add_route('hello', '/')
14 config.add_view(hello_world, route_name='hello')
15 app = config.make_wsgi_app()
16 serve(app, host='0.0.0.0', port=6543)

4. Run the application:

$ $VENV/bin/python app.py

5. Open http://localhost:6543/ in your browser.

Analysis

New to Python web programming? If so, some lines in the module merit explanation:

1. Line 11. The if __name__ == '__main__': is Python’s way of saying, ”Start here when
running from the command line”, rather than when this module is imported.

2. Lines 12-14. Use Pyramid’s configurator in a context manager to connect view code to a particular
URL route.

3. Lines 6-8. Implement the view code that generates the response.

4. Lines 15-17. Publish a WSGI app using an HTTP server.

As shown in this example, the configurator plays a central role in Pyramid development. Building an
application from loosely-coupled parts via Application Configuration is a central idea in Pyramid, one that
we will revisit regularly in this Quick Tutorial.

78 Contents
The Pyramid Web Framework, Version 1.9.4

Extra credit

1. Why do we do this:

print('Incoming request')

...instead of:

print 'Incoming request'

2. What happens if you return a string of HTML? A sequence of integers?


3. Put something invalid, such as print xyz, in the view function. Kill your python app.py
with ctrl-C and restart, then reload your browser. See the exception in the console?
4. The GI in WSGI stands for ”Gateway Interface”. What web standard is this modelled after?

02: Python Packages for Pyramid Applications

Most modern Python development is done using Python packages, an approach Pyramid puts to good use.
In this step we redo ”Hello World” as a minimal Python package inside a minimal Python project.

Background

Python developers can organize a collection of modules and files into a namespaced unit called a package.
If a directory is on sys.path and has a special file named __init__.py, it is treated as a Python
package.
Packages can be bundled up, made available for installation, and installed through a toolchain oriented
around a setup.py file. For this tutorial, this is all you need to know:
• We will have a directory for each tutorial step as a project.
• This project will contain a setup.py which injects the features of the project machinery into the
directory.
• In this project we will make a tutorial subdirectory into a Python package using an __init__.
py Python module file.
• We will run pip install -e . to install our project in development mode.
In summary:
• You’ll do your development in a Python package.
• That package will be part of a project.

0.2. Tutorials 79
The Pyramid Web Framework, Version 1.9.4

Objectives

• Make a Python ”package” directory with an __init__.py.

• Get a minimum Python ”project” in place by making a setup.py.

• Install our tutorial project in development mode.

Steps

1. Make an area for this tutorial step:

$ cd ..; mkdir package; cd package

2. In package/setup.py, enter the following:

from setuptools import setup

requires = [
'pyramid',
]

setup(name='tutorial',
install_requires=requires,
)

3. Make the new project installed for development then make a directory for the actual code:

$ $VENV/bin/pip install -e .
$ mkdir tutorial

4. Enter the following into package/tutorial/__init__.py:

# package

5. Enter the following into package/tutorial/app.py:

80 Contents
The Pyramid Web Framework, Version 1.9.4

from waitress import serve


from pyramid.config import Configurator
from pyramid.response import Response

def hello_world(request):
print('Incoming request')
return Response('<body><h1>Hello World!</h1></body>')

if __name__ == '__main__':
with Configurator() as config:
config.add_route('hello', '/')
config.add_view(hello_world, route_name='hello')
app = config.make_wsgi_app()
serve(app, host='0.0.0.0', port=6543)

6. Run the WSGI application with:

$ $VENV/bin/python tutorial/app.py

7. Open http://localhost:6543/ in your browser.

Analysis

Python packages give us an organized unit of project development. Python projects, via setup.py, give
us special features when our package is installed (in this case, in local development mode, also called local
editable mode as indicated by -e .).
In this step we have a Python package called tutorial. We use the same name in each step of the
tutorial, to avoid unnecessary retyping.
Above this tutorial directory we have the files that handle the packaging of this project. At the moment,
all we need is a bare-bones setup.py.
Everything else is the same about our application. We simply made a Python package with a setup.py
and installed it in development mode.
Note that the way we’re running the app (python tutorial/app.py) is a bit of an odd duck. We
would never do this unless we were writing a tutorial that tries to capture how this stuff works one step at
a time. It’s generally a bad idea to run a Python module inside a package directly as a script.
See also:
Python Packages and Working in ”Development Mode”.

0.2. Tutorials 81
The Pyramid Web Framework, Version 1.9.4

03: Application Configuration with .ini Files

Use Pyramid’s pserve command with a .ini configuration file for simpler, better application running.

Background

Pyramid has a first-class concept of configuration distinct from code. This approach is optional, but its
presence makes it distinct from other Python web frameworks. It taps into Python’s setuptools library,
which establishes conventions for installing and providing ”entry points” for Python projects. Pyramid uses
an entry point to let a Pyramid application know where to find the WSGI app.

Objectives

• Modify our setup.py to have an entry point telling Pyramid the location of the WSGI app.

• Create an application driven by an .ini file.

• Start the application with Pyramid’s pserve command.

• Move code into the package’s __init__.py.

Steps

1. First we copy the results of the previous step:

$ cd ..; cp -r package ini; cd ini

2. Our ini/setup.py needs a setuptools ”entry point” in the setup() function:

82 Contents
The Pyramid Web Framework, Version 1.9.4

1 from setuptools import setup


2

3 requires = [
4 'pyramid',
5 'waitress',
6 ]
7

8 setup(name='tutorial',
9 install_requires=requires,
10 entry_points="""\
11 [paste.app_factory]
12 main = tutorial:main
13 """,
14 )

3. We can now install our project, thus generating (or re-generating) an ”egg” at ini/tutorial.
egg-info:

$ $VENV/bin/pip install -e .

4. Let’s make a file ini/development.ini for our configuration:

1 [app:main]
2 use = egg:tutorial
3

4 [server:main]
5 use = egg:waitress#main
6 listen = localhost:6543

5. We can refactor our startup code from the previous step’s app.py into ini/tutorial/
__init__.py:

1 from pyramid.config import Configurator


2 from pyramid.response import Response
3

5 def hello_world(request):
6 return Response('<body><h1>Hello World!</h1></body>')
7

(continues on next page)

0.2. Tutorials 83
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


8

9 def main(global_config, **settings):


10 config = Configurator(settings=settings)
11 config.add_route('hello', '/')
12 config.add_view(hello_world, route_name='hello')
13 return config.make_wsgi_app()

6. Now that ini/tutorial/app.py isn’t used, let’s remove it:

$ rm tutorial/app.py

7. Run your Pyramid application with:

$ $VENV/bin/pserve development.ini --reload

8. Open http://localhost:6543/.

Analysis

Our development.ini file is read by pserve and serves to bootstrap our application. Processing
then proceeds as described in the Pyramid chapter on application startup:

• pserve looks for [app:main] and finds use = egg:tutorial.

• The projects’s setup.py has defined an ”entry point” (lines 10-13) for the project’s ”main” entry
point of tutorial:main.

• The tutorial package’s __init__ has a main function.

• This function is invoked, with the values from certain .ini sections passed in.

The .ini file is also used for two other functions:

84 Contents
The Pyramid Web Framework, Version 1.9.4

• Configuring the WSGI server. [server:main] wires up the choice of which WSGI server for
your WSGI application. In this case, we are using waitress which we specified in tutorial/
setup.py and was installed in the Requirements step at the start of this tutorial. It also wires up the
port number: listen = localhost:6543 tells waitress to listen on host localhost at
port 6543.

Running the command $VENV/bin/pip install -e . will check for previously in-
stalled packages in our virtual environment that are specified in our package’s setup.py file, then
install our package in editable mode, installing any requirements that were not previously installed.
If a requirement was manually installed previously on the command line or otherwise, in this case
Waitress, then $VENV/bin/pip install -e . will merely check that it is installed and move
on.

• Configuring Python logging. Pyramid uses Python standard logging, which needs a number of con-
figuration values. The .ini serves this function. This provides the console log output that you see
on startup and each request.

We moved our startup code from app.py to the package’s tutorial/__init__.py. This isn’t nec-
essary, but it is a common style in Pyramid to take the WSGI app bootstrapping out of your module’s code
and put it in the package’s __init__.py.

The pserve application runner has a number of command-line arguments and options. We are using
--reload which tells pserve to watch the filesystem for changes to relevant code (Python files, the
INI file, etc.) and, when something changes, restart the application. Very handy during development.

Extra credit

1. If you don’t like configuration and/or .ini files, could you do this yourself in Python code?

2. Can we have multiple .ini configuration files for a project? Why might you want to do that?

3. The entry point in setup.py didn’t mention __init__.py when it declared tutorial:main
function. Why not?

4. What is the purpose of **settings? What does the ** signify?

See also:

Creating a Pyramid Project, Pyramid cookiecutters, What Is This pserve Thing, Environment Variables
and .ini File Settings, PasteDeploy Configuration Files

0.2. Tutorials 85
The Pyramid Web Framework, Version 1.9.4

04: Easier Development with debugtoolbar

Error handling and introspection using the pyramid_debugtoolbar add-on.

Background

As we introduce the basics, we also want to show how to be productive in development and debugging.
For example, we just discussed template reloading, and earlier we showed --reload for application
reloading.

pyramid_debugtoolbar is a popular Pyramid add-on which makes several tools available in your
browser. Adding it to your project illustrates several points about configuration.

Objectives

• Install and enable the toolbar to help during development.

• Explain Pyramid add-ons.

• Show how an add-on gets configured into your application.

Steps

1. First we copy the results of the previous step, as well as install the pyramid_debugtoolbar
package:

$ cd ..; cp -r ini debugtoolbar; cd debugtoolbar


$ $VENV/bin/pip install -e .
$ $VENV/bin/pip install pyramid_debugtoolbar

2. Our debugtoolbar/development.ini gets a configuration entry for pyramid.


includes:

86 Contents
The Pyramid Web Framework, Version 1.9.4

1 [app:main]
2 use = egg:tutorial
3 pyramid.includes =
4 pyramid_debugtoolbar
5

6 [server:main]
7 use = egg:waitress#main
8 listen = localhost:6543

3. Run the WSGI application with:

$ $VENV/bin/pserve development.ini --reload

4. Open http://localhost:6543/ in your browser. See the handy toolbar on the right.

Analysis

pyramid_debugtoolbar is a full-fledged Python package, available on PyPI just like thousands of


other Python packages. Thus we start by installing the pyramid_debugtoolbar package into our
virtual environment using normal Python package installation commands.

The pyramid_debugtoolbar Python package is also a Pyramid add-on, which means we need to
include its add-on configuration into our web application. We could do this with imperative configuration
in tutorial/__init__.py by using config.include. Pyramid also supports wiring in add-
on configuration via our development.ini using pyramid.includes. We use this to load the
configuration for the debugtoolbar.

You’ll now see an attractive button on the right side of your browser, which you may click to provide
introspective access to debugging information in a new browser tab. Even better, if your web application
generates an error, you will see a nice traceback on the screen. When you want to disable this toolbar,
there’s no need to change code: you can remove it from pyramid.includes in the relevant .ini
configuration file (thus showing why configuration files are handy).

Note that the toolbar injects a small amount of HTML/CSS into your app just before the closing </body>
tag in order to display itself. If you start to experience otherwise inexplicable client-side weirdness, you
can shut it off by commenting out the pyramid_debugtoolbar line in pyramid.includes tem-
porarily.

See also:

See also pyramid_debugtoolbar.

0.2. Tutorials 87
The Pyramid Web Framework, Version 1.9.4

Extra credit

1. Why don’t we add pyramid_debugtoolbar to the list of install_requires dependencies


in debugtoolbar/setup.py?

2. Introduce a bug into your application. Change:

def hello_world(request):
return Response('<body><h1>Hello World!</h1></body>')

to:

def hello_world(request):
return xResponse('<body><h1>Hello World!</h1></body>')

Save, and visit http://localhost:6543/ again. Notice the nice traceback display. On the lowest line,
click the ”screen” icon to the right, and try typing the variable names request and Response.
What else can you discover?

05: Unit Tests and pytest

Provide unit testing for our project’s Python code.

Background

As the mantra says, ”Untested code is broken code.” The Python community has had a long culture of
writing test scripts which ensure that your code works correctly as you write it and maintain it in the
future. Pyramid has always had a deep commitment to testing, with 100% test coverage from the earliest
pre-releases.

Python includes a unit testing framework in its standard library. Over the years a number of Python projects,
such as pytest, have extended this framework with alternative test runners that provide more convenience
and functionality. The Pyramid developers use pytest, which we’ll use in this tutorial.

Don’t worry, this tutorial won’t be pedantic about ”test-driven development” (TDD). We’ll do just enough
to ensure that, in each step, we haven’t majorly broken the code. As you’re writing your code, you might
find this more convenient than changing to your browser constantly and clicking reload.

We’ll also leave discussion of pytest-cov for another section.

88 Contents
The Pyramid Web Framework, Version 1.9.4

Objectives

• Write unit tests that ensure the quality of our code.

• Install a Python package (pytest) which helps in our testing.

Steps

1. First we copy the results of the previous step, as well as install the pytest package:

$ cd ..; cp -r debugtoolbar unit_testing; cd unit_testing


$ $VENV/bin/pip install -e .
$ $VENV/bin/pip install pytest

2. Now we write a simple unit test in unit_testing/tutorial/tests.py:

1 import unittest
2

3 from pyramid import testing


4

6 class TutorialViewTests(unittest.TestCase):
7 def setUp(self):
8 self.config = testing.setUp()
9

10 def tearDown(self):
11 testing.tearDown()
12

13 def test_hello_world(self):
14 from tutorial import hello_world
15

16 request = testing.DummyRequest()
17 response = hello_world(request)
18 self.assertEqual(response.status_code, 200)

3. Now run the tests:

0.2. Tutorials 89
The Pyramid Web Framework, Version 1.9.4

$ $VENV/bin/py.test tutorial/tests.py -q
.
1 passed in 0.14 seconds

Analysis

Our tests.py imports the Python standard unit testing framework. To make writing Pyramid-oriented
tests more convenient, Pyramid supplies some pyramid.testing helpers which we use in the test
setup and teardown. Our one test imports the view, makes a dummy request, and sees if the view returns
what we expect.
The tests.TutorialViewTests.test_hello_world test is a small example of a unit test.
First, we import the view inside each test. Why not import at the top, like in normal Python code? Because
imports can cause effects that break a test. We’d like our tests to be in units, hence the name unit testing.
Each test should isolate itself to the correct degree.
Our test then makes a fake incoming web request, then calls our Pyramid view. We test the HTTP status
code on the response to make sure it matches our expectations.
Note that our use of pyramid.testing.setUp() and pyramid.testing.tearDown() aren’t
actually necessary here; they are only necessary when your test needs to make use of the config object
(it’s a Configurator) to add stuff to the configuration state before calling the view.

Extra credit

1. Change the test to assert that the response status code should be 404 (meaning, not found). Run
py.test again. Read the error report and see if you can decipher what it is telling you.
2. As a more realistic example, put the tests.py back as you found it, and put an error in your view,
such as a reference to a non-existing variable. Run the tests and see how this is more convenient than
reloading your browser and going back to your code.
3. Finally, for the most realistic test, read about Pyramid Response objects and see how to change
the response code. Run the tests and see how testing confirms the ”contract” that your code claims
to support.
4. How could we add a unit test assertion to test the HTML value of the response body?
5. Why do we import the hello_world view function inside the test_hello_world method
instead of at the top of the module?
See also:
See also Unit, Integration, and Functional Testing

90 Contents
The Pyramid Web Framework, Version 1.9.4

06: Functional Testing with WebTest

Write end-to-end full-stack testing using webtest.

Background

Unit tests are a common and popular approach to test-driven development (TDD). In web applications,
though, the templating and entire apparatus of a web site are important parts of the delivered quality. We’d
like a way to test these.

WebTest is a Python package that does functional testing. With WebTest you can write tests which simulate
a full HTTP request against a WSGI application, then test the information in the response. For speed
purposes, WebTest skips the setup/teardown of an actual HTTP server, providing tests that run fast enough
to be part of TDD.

Objectives

• Write a test which checks the contents of the returned HTML.

Steps

1. First we copy the results of the previous step, as well as install the webtest package:

$ cd ..; cp -r unit_testing functional_testing; cd functional_


,→testing

$ $VENV/bin/pip install -e .
$ $VENV/bin/pip install webtest

2. Let’s extend functional_testing/tutorial/tests.py to include a functional test:

0.2. Tutorials 91
The Pyramid Web Framework, Version 1.9.4

1 import unittest
2

3 from pyramid import testing


4

6 class TutorialViewTests(unittest.TestCase):
7 def setUp(self):
8 self.config = testing.setUp()
9

10 def tearDown(self):
11 testing.tearDown()
12

13 def test_hello_world(self):
14 from tutorial import hello_world
15

16 request = testing.DummyRequest()
17 response = hello_world(request)
18 self.assertEqual(response.status_code, 200)
19

20

21 class TutorialFunctionalTests(unittest.TestCase):
22 def setUp(self):
23 from tutorial import main
24 app = main({})
25 from webtest import TestApp
26

27 self.testapp = TestApp(app)
28

29 def test_hello_world(self):
30 res = self.testapp.get('/', status=200)
31 self.assertIn(b'<h1>Hello World!</h1>', res.body)

Be sure this file is not executable, or pytest may not include your tests.

3. Now run the tests:

$ $VENV/bin/py.test tutorial/tests.py -q
..
2 passed in 0.25 seconds

92 Contents
The Pyramid Web Framework, Version 1.9.4

Analysis

We now have the end-to-end testing we were looking for. WebTest lets us simply extend our existing
pytest-based test approach with functional tests that are reported in the same output. These new tests
not only cover our templating, but they didn’t dramatically increase the execution time of our tests.

Extra credit

1. Why do our functional tests use b''?

07: Basic Web Handling With Views

Organize a views module with decorators and multiple views.

Background

For the examples so far, the hello_world function is a ”view”. In Pyramid, views are the primary way
to accept web requests and return responses.

So far our examples place everything in one file:

• The view function

• Its registration with the configurator

• The route to map it to a URL

• The WSGI application launcher

Let’s move the views out to their own views.py module and change our startup code to scan that module,
looking for decorators that set up the views. Let’s also add a second view and update our tests.

Objectives

• Move views into a module that is scanned by the configurator.

• Create decorators that do declarative configuration.

0.2. Tutorials 93
The Pyramid Web Framework, Version 1.9.4

Steps

1. Let’s begin by using the previous package as a starting point for a new distribution, then making it
active:

$ cd ..; cp -r functional_testing views; cd views


$ $VENV/bin/pip install -e .

2. Our views/tutorial/__init__.py gets a lot shorter:

1 from pyramid.config import Configurator


2

4 def main(global_config, **settings):


5 config = Configurator(settings=settings)
6 config.add_route('home', '/')
7 config.add_route('hello', '/howdy')
8 config.scan('.views')
9 return config.make_wsgi_app()

3. Let’s add a module views/tutorial/views.py that is focused on handling requests and re-
sponses:

1 from pyramid.response import Response


2 from pyramid.view import view_config
3

5 # First view, available at http://localhost:6543/


6 @view_config(route_name='home')
7 def home(request):
8 return Response('<body>Visit <a href="/howdy">hello</a></
,→body>')

10

11 # /howdy
12 @view_config(route_name='hello')
13 def hello(request):
14 return Response('<body>Go back <a href="/">home</a></body>')

4. Update the tests to cover the two new views:

94 Contents
The Pyramid Web Framework, Version 1.9.4

1 import unittest
2

3 from pyramid import testing


4

6 class TutorialViewTests(unittest.TestCase):
7 def setUp(self):
8 self.config = testing.setUp()
9

10 def tearDown(self):
11 testing.tearDown()
12

13 def test_home(self):
14 from .views import home
15

16 request = testing.DummyRequest()
17 response = home(request)
18 self.assertEqual(response.status_code, 200)
19 self.assertIn(b'Visit', response.body)
20

21 def test_hello(self):
22 from .views import hello
23

24 request = testing.DummyRequest()
25 response = hello(request)
26 self.assertEqual(response.status_code, 200)
27 self.assertIn(b'Go back', response.body)
28

29

30 class TutorialFunctionalTests(unittest.TestCase):
31 def setUp(self):
32 from tutorial import main
33 app = main({})
34 from webtest import TestApp
35

36 self.testapp = TestApp(app)
37

38 def test_home(self):
39 res = self.testapp.get('/', status=200)
40 self.assertIn(b'<body>Visit', res.body)
41

42 def test_hello(self):
(continues on next page)

0.2. Tutorials 95
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


43 res = self.testapp.get('/howdy', status=200)
44 self.assertIn(b'<body>Go back', res.body)

5. Now run the tests:

$ $VENV/bin/py.test tutorial/tests.py -q
....
4 passed in 0.28 seconds

6. Run your Pyramid application with:

$ $VENV/bin/pserve development.ini --reload

7. Open http://localhost:6543/ and http://localhost:6543/howdy in your browser.

Analysis

We added some more URLs, but we also removed the view code from the application startup code in
tutorial/__init__.py. Our views, and their view registrations (via decorators) are now in a module
views.py, which is scanned via config.scan('.views').
We have two views, each leading to the other. If you start at http://localhost:6543/, you get a response with
a link to the next view. The hello view (available at the URL /howdy) has a link back to the first view.
This step also shows that the name appearing in the URL, the name of the ”route” that maps a URL to a
view, and the name of the view, can all be different. More on routes later.
Earlier we saw config.add_view as one way to configure a view. This section introduces
@view_config. Pyramid’s configuration supports imperative configuration, such as the config.
add_view in the previous example. You can also use declarative configuration, in which a Python
decorator is placed on the line above the view. Both approaches result in the same final configuration, thus
usually, it is simply a matter of taste.

Extra credit

1. What does the dot in .views signify?


2. Why might assertIn be a better choice in testing the text in responses than assertEqual?
See also:
Views, View Configuration, and Debugging View Configuration

96 Contents
The Pyramid Web Framework, Version 1.9.4

08: HTML Generation With Templating

Most web frameworks don’t embed HTML in programming code. Instead, they pass data into a templating
system. In this step we look at the basics of using HTML templates in Pyramid.

Background

Ouch. We have been making our own Response and filling the response body with HTML. You usually
won’t embed an HTML string directly in Python, but instead will use a templating language.

Pyramid doesn’t mandate a particular database system, form library, and so on. It encourages replaceabil-
ity. This applies equally to templating, which is fortunate: developers have strong views about template
languages. As of Pyramid 1.5a2, Pyramid doesn’t even bundle a template language!

It does, however, have strong ties to Jinja2, Mako, and Chameleon. In this step we see how to add pyra-
mid_chameleon to your project, then change your views to use templating.

Objectives

• Enable the pyramid_chameleon Pyramid add-on.

• Generate HTML from template files.

• Connect the templates as ”renderers” for view code.

• Change the view code to simply return data.

Steps

1. Let’s begin by using the previous package as a starting point for a new project:

$ cd ..; cp -r views templating; cd templating

2. This step depends on pyramid_chameleon, so add it as a dependency in templating/


setup.py:

0.2. Tutorials 97
The Pyramid Web Framework, Version 1.9.4

1 from setuptools import setup


2

3 requires = [
4 'pyramid',
5 'pyramid_chameleon',
6 'waitress',
7 ]
8

9 setup(name='tutorial',
10 install_requires=requires,
11 entry_points="""\
12 [paste.app_factory]
13 main = tutorial:main
14 """,
15 )

3. Now we can activate the development-mode distribution:

$ $VENV/bin/pip install -e .

4. We need to connect pyramid_chameleon as a renderer by making a call in the setup of


templating/tutorial/__init__.py:

1 from pyramid.config import Configurator


2

4 def main(global_config, **settings):


5 config = Configurator(settings=settings)
6 config.include('pyramid_chameleon')
7 config.add_route('home', '/')
8 config.add_route('hello', '/howdy')
9 config.scan('.views')
10 return config.make_wsgi_app()

5. Our templating/tutorial/views.py no longer has HTML in it:

1 from pyramid.view import view_config


2

(continues on next page)

98 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


4 # First view, available at http://localhost:6543/
5 @view_config(route_name='home', renderer='home.pt')
6 def home(request):
7 return {'name': 'Home View'}
8

10 # /howdy
11 @view_config(route_name='hello', renderer='home.pt')
12 def hello(request):
13 return {'name': 'Hello View'}

6. Instead we have templating/tutorial/home.pt as a template:

<!DOCTYPE html>
<html lang="en">
<head>
<title>Quick Tutorial: ${name}</title>
</head>
<body>
<h1>Hi ${name}</h1>
</body>
</html>

7. For convenience, change templating/development.ini to reload templates automatically


with pyramid.reload_templates:

[app:main]
use = egg:tutorial
pyramid.reload_templates = true
pyramid.includes =
pyramid_debugtoolbar

[server:main]
use = egg:waitress#main
listen = localhost:6543

8. Our unit tests in templating/tutorial/tests.py can focus on data:

0.2. Tutorials 99
The Pyramid Web Framework, Version 1.9.4

1 import unittest
2

3 from pyramid import testing


4

6 class TutorialViewTests(unittest.TestCase):
7 def setUp(self):
8 self.config = testing.setUp()
9

10 def tearDown(self):
11 testing.tearDown()
12

13 def test_home(self):
14 from .views import home
15

16 request = testing.DummyRequest()
17 response = home(request)
18 # Our view now returns data
19 self.assertEqual('Home View', response['name'])
20

21 def test_hello(self):
22 from .views import hello
23

24 request = testing.DummyRequest()
25 response = hello(request)
26 # Our view now returns data
27 self.assertEqual('Hello View', response['name'])
28

29

30 class TutorialFunctionalTests(unittest.TestCase):
31 def setUp(self):
32 from tutorial import main
33 app = main({})
34 from webtest import TestApp
35

36 self.testapp = TestApp(app)
37

38 def test_home(self):
39 res = self.testapp.get('/', status=200)
40 self.assertIn(b'<h1>Hi Home View', res.body)
41

42 def test_hello(self):
(continues on next page)

100 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


43 res = self.testapp.get('/howdy', status=200)
44 self.assertIn(b'<h1>Hi Hello View', res.body)

9. Now run the tests:

$ $VENV/bin/py.test tutorial/tests.py -q
....
4 passed in 0.46 seconds

10. Run your Pyramid application with:

$ $VENV/bin/pserve development.ini --reload

11. Open http://localhost:6543/ and http://localhost:6543/howdy in your browser.

Analysis

Ahh, that looks better. We have a view that is focused on Python code. Our @view_config decorator
specifies a renderer that points to our template file. Our view then simply returns data which is then
supplied to our template. Note that we used the same template for both views.

Note the effect on testing. We can focus on having a data-oriented contract with our view code.

See also:

Templates, Debugging Templates, and Available Add-On Template System Bindings.

09: Organizing Views With View Classes

Change our view functions to be methods on a view class, then move some declarations to the class level.

0.2. Tutorials 101


The Pyramid Web Framework, Version 1.9.4

Background

So far our views have been simple, free-standing functions. Many times your views are related to one
another. They may consist of different ways to look at or work on the same data, or be a REST API that
handles multiple operations. Grouping these views together as a view class makes sense:

• Group views.

• Centralize some repetitive defaults.

• Share some state and helpers.

In this step we just do the absolute minimum to convert the existing views to a view class. In a later tutorial
step, we’ll examine view classes in depth.

Objectives

• Group related views into a view class.

• Centralize configuration with class-level @view_defaults.

Steps

1. First we copy the results of the previous step:

$ cd ..; cp -r templating view_classes; cd view_classes


$ $VENV/bin/pip install -e .

2. Our view_classes/tutorial/views.py now has a view class with our two views:

102 Contents
The Pyramid Web Framework, Version 1.9.4

1 from pyramid.view import (


2 view_config,
3 view_defaults
4 )
5

6 @view_defaults(renderer='home.pt')
7 class TutorialViews:
8 def __init__(self, request):
9 self.request = request
10

11 @view_config(route_name='home')
12 def home(self):
13 return {'name': 'Home View'}
14

15 @view_config(route_name='hello')
16 def hello(self):
17 return {'name': 'Hello View'}

3. Our unit tests in view_classes/tutorial/tests.py don’t run, so let’s modify them to


import the view class, and make an instance before getting a response:

1 import unittest
2

3 from pyramid import testing


4

6 class TutorialViewTests(unittest.TestCase):
7 def setUp(self):
8 self.config = testing.setUp()
9

10 def tearDown(self):
11 testing.tearDown()
12

13 def test_home(self):
14 from .views import TutorialViews
15

16 request = testing.DummyRequest()
17 inst = TutorialViews(request)
18 response = inst.home()
19 self.assertEqual('Home View', response['name'])
20

(continues on next page)

0.2. Tutorials 103


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


21 def test_hello(self):
22 from .views import TutorialViews
23

24 request = testing.DummyRequest()
25 inst = TutorialViews(request)
26 response = inst.hello()
27 self.assertEqual('Hello View', response['name'])
28

29

30 class TutorialFunctionalTests(unittest.TestCase):
31 def setUp(self):
32 from tutorial import main
33 app = main({})
34 from webtest import TestApp
35

36 self.testapp = TestApp(app)
37

38 def test_home(self):
39 res = self.testapp.get('/', status=200)
40 self.assertIn(b'<h1>Hi Home View', res.body)
41

42 def test_hello(self):
43 res = self.testapp.get('/howdy', status=200)
44 self.assertIn(b'<h1>Hi Hello View', res.body)

4. Now run the tests:

$ $VENV/bin/py.test tutorial/tests.py -q
....
4 passed in 0.34 seconds

5. Run your Pyramid application with:

$ $VENV/bin/pserve development.ini --reload

6. Open http://localhost:6543/ and http://localhost:6543/howdy in your browser.

104 Contents
The Pyramid Web Framework, Version 1.9.4

Analysis

To ease the transition to view classes, we didn’t introduce any new functionality. We simply changed the
view functions to methods on a view class, then updated the tests.

In our TutorialViews view class, you can see that our two view classes are logically grouped together
as methods on a common class. Since the two views shared the same template, we could move that to a
@view_defaults decorator at the class level.

The tests needed to change. Obviously we needed to import the view class. But you can also see the pattern
in the tests of instantiating the view class with the dummy request first, then calling the view method being
tested.

See also:

Defining a View Callable as a Class

10: Handling Web Requests and Responses

Web applications handle incoming requests and return outgoing responses. Pyramid makes working with
requests and responses convenient and reliable.

Objectives

• Learn the background on Pyramid’s choices for requests and responses.

• Grab data out of the request.

• Change information in the response headers.

Background

Developing for the web means processing web requests. As this is a critical part of a web application, web
developers need a robust, mature set of software for web requests and returning web responses.

Pyramid has always fit nicely into the existing world of Python web development (virtual environ-
ments, packaging, cookiecutters, first to embrace Python 3, and so on). Pyramid turned to the well-
regarded WebOb Python library for request and response handling. In our example above, Pyramid hands
hello_world a request that is based on WebOb.

0.2. Tutorials 105


The Pyramid Web Framework, Version 1.9.4

Steps

1. First we copy the results of the view_classes step:

$ cd ..; cp -r view_classes request_response; cd request_


,→response

$ $VENV/bin/pip install -e .

2. Simplify the routes in request_response/tutorial/__init__.py:

1 from pyramid.config import Configurator


2

4 def main(global_config, **settings):


5 config = Configurator(settings=settings)
6 config.add_route('home', '/')
7 config.add_route('plain', '/plain')
8 config.scan('.views')
9 return config.make_wsgi_app()

3. We only need one view in request_response/tutorial/views.py:

1 from pyramid.httpexceptions import HTTPFound


2 from pyramid.response import Response
3 from pyramid.view import view_config
4

6 class TutorialViews:
7 def __init__(self, request):
8 self.request = request
9

10 @view_config(route_name='home')
11 def home(self):
12 return HTTPFound(location='/plain')
13

14 @view_config(route_name='plain')
15 def plain(self):
16 name = self.request.params.get('name', 'No Name Provided
,→')
17

(continues on next page)

106 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


18 body = 'URL %s with name: %s' % (self.request.url, name)
19 return Response(
20 content_type='text/plain',
21 body=body
22 )

4. Update the tests in request_response/tutorial/tests.py:

1 import unittest
2

3 from pyramid import testing


4

6 class TutorialViewTests(unittest.TestCase):
7 def setUp(self):
8 self.config = testing.setUp()
9

10 def tearDown(self):
11 testing.tearDown()
12

13 def test_home(self):
14 from .views import TutorialViews
15

16 request = testing.DummyRequest()
17 inst = TutorialViews(request)
18 response = inst.home()
19 self.assertEqual(response.status, '302 Found')
20

21 def test_plain_without_name(self):
22 from .views import TutorialViews
23

24 request = testing.DummyRequest()
25 inst = TutorialViews(request)
26 response = inst.plain()
27 self.assertIn(b'No Name Provided', response.body)
28

29 def test_plain_with_name(self):
30 from .views import TutorialViews
31

32 request = testing.DummyRequest()
33 request.GET['name'] = 'Jane Doe'
(continues on next page)

0.2. Tutorials 107


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


34 inst = TutorialViews(request)
35 response = inst.plain()
36 self.assertIn(b'Jane Doe', response.body)
37

38

39 class TutorialFunctionalTests(unittest.TestCase):
40 def setUp(self):
41 from tutorial import main
42

43 app = main({})
44 from webtest import TestApp
45

46 self.testapp = TestApp(app)
47

48 def test_plain_without_name(self):
49 res = self.testapp.get('/plain', status=200)
50 self.assertIn(b'No Name Provided', res.body)
51

52 def test_plain_with_name(self):
53 res = self.testapp.get('/plain?name=Jane%20Doe',␣
,→status=200)

54 self.assertIn(b'Jane Doe', res.body)

5. Now run the tests:

$ $VENV/bin/py.test tutorial/tests.py -q
.....
5 passed in 0.30 seconds

6. Run your Pyramid application with:

$ $VENV/bin/pserve development.ini --reload

7. Open http://localhost:6543/ in your browser. You will be redirected to http://localhost:6543/plain.

8. Open http://localhost:6543/plain?name=alice in your browser.

108 Contents
The Pyramid Web Framework, Version 1.9.4

Analysis

In this view class, we have two routes and two views, with the first leading to the second by an HTTP
redirect. Pyramid can generate redirects by returning a special object from a view or raising a special
exception.

In this Pyramid view, we get the URL being visited from request.url. Also, if you visited http:
//localhost:6543/plain?name=alice, the name is included in the body of the response:

URL http://localhost:6543/plain?name=alice with name: alice

Finally, we set the response’s content type and body, then return the response.

We updated the unit and functional tests to prove that our code does the redirection, but also handles
sending and not sending /plain?name.

Extra credit

1. Could we also raise HTTPFound(location='/plain') instead of returning it? If so,


what’s the difference?

See also:

Request and Response Objects, generate redirects

11: Dispatching URLs To Views With Routing

Routing matches incoming URL patterns to view code. Pyramid’s routing has a number of useful features.

0.2. Tutorials 109


The Pyramid Web Framework, Version 1.9.4

Background

Writing web applications usually means sophisticated URL design. We just saw some Pyramid machinery
for requests and views. Let’s look at features that help in routing.

Previously we saw the basics of routing URLs to views in Pyramid.

• Your project’s ”setup” code registers a route name to be used when matching part of the URL

• Elsewhere a view is configured to be called for that route name.

Why do this twice? Other Python web frameworks let you create a route and associate it with a view
in one step. As illustrated in Routes need relative ordering, multiple routes might match the same URL
pattern. Rather than provide ways to help guess, Pyramid lets you be explicit in ordering. Pyramid also
gives facilities to avoid the problem. It’s relatively easy to build a system that uses implicit route ordering
with Pyramid too. See The Groundhog series of screencasts if you’re interested in doing so.

Objectives

• Define a route that extracts part of the URL into a Python dictionary.

• Use that dictionary data in a view.

Steps

1. First we copy the results of the view_classes step:

$ cd ..; cp -r view_classes routing; cd routing


$ $VENV/bin/pip install -e .

2. Our routing/tutorial/__init__.py needs a route with a replacement pattern:

110 Contents
The Pyramid Web Framework, Version 1.9.4

1 from pyramid.config import Configurator


2

4 def main(global_config, **settings):


5 config = Configurator(settings=settings)
6 config.include('pyramid_chameleon')
7 config.add_route('home', '/howdy/{first}/{last}')
8 config.scan('.views')
9 return config.make_wsgi_app()

3. We just need one view in routing/tutorial/views.py:

1 from pyramid.view import (


2 view_config,
3 view_defaults
4 )
5

7 @view_defaults(renderer='home.pt')
8 class TutorialViews:
9 def __init__(self, request):
10 self.request = request
11

12 @view_config(route_name='home')
13 def home(self):
14 first = self.request.matchdict['first']
15 last = self.request.matchdict['last']
16 return {
17 'name': 'Home View',
18 'first': first,
19 'last': last
20 }

4. We just need one view in routing/tutorial/home.pt:

1 <!DOCTYPE html>
2 <html lang="en">
3 <head>
4 <title>Quick Tutorial: ${name}</title>
5 </head>
(continues on next page)

0.2. Tutorials 111


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


6 <body>
7 <h1>${name}</h1>
8 <p>First: ${first}, Last: ${last}</p>
9 </body>
10 </html>

5. Update routing/tutorial/tests.py:

1 import unittest
2

3 from pyramid import testing


4

6 class TutorialViewTests(unittest.TestCase):
7 def setUp(self):
8 self.config = testing.setUp()
9

10 def tearDown(self):
11 testing.tearDown()
12

13 def test_home(self):
14 from .views import TutorialViews
15

16 request = testing.DummyRequest()
17 request.matchdict['first'] = 'First'
18 request.matchdict['last'] = 'Last'
19 inst = TutorialViews(request)
20 response = inst.home()
21 self.assertEqual(response['first'], 'First')
22 self.assertEqual(response['last'], 'Last')
23

24

25 class TutorialFunctionalTests(unittest.TestCase):
26 def setUp(self):
27 from tutorial import main
28 app = main({})
29 from webtest import TestApp
30

31 self.testapp = TestApp(app)
32

33 def test_home(self):
(continues on next page)

112 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


34 res = self.testapp.get('/howdy/Jane/Doe', status=200)
35 self.assertIn(b'Jane', res.body)
36 self.assertIn(b'Doe', res.body)

6. Now run the tests:

$ $VENV/bin/py.test tutorial/tests.py -q
..
2 passed in 0.39 seconds

7. Run your Pyramid application with:

$ $VENV/bin/pserve development.ini --reload

8. Open http://localhost:6543/howdy/amy/smith in your browser.

Analysis

In __init__.py we see an important change in our route declaration:

config.add_route('hello', '/howdy/{first}/{last}')

With this we tell the configurator that our URL has a ”replacement pattern”. With this, URLs such as
/howdy/amy/smith will assign amy to first and smith to last. We can then use this data in our
view:

self.request.matchdict['first']
self.request.matchdict['last']

request.matchdict contains values from the URL that match the ”replacement patterns” (the curly
braces) in the route declaration. This information can then be used anywhere in Pyramid that has access
to the request.

0.2. Tutorials 113


The Pyramid Web Framework, Version 1.9.4

Extra credit

1. What happens if you to go the URL http://localhost:6543/howdy? Is this the result that you ex-
pected?

See also:

Weird Stuff You Can Do With URL Dispatch

12: Templating With jinja2

We just said Pyramid doesn’t prefer one templating language over another. Time to prove it. Jinja2
is a popular templating system, used in Flask and modeled after Django’s templates. Let’s add
pyramid_jinja2, a Pyramid add-on which enables Jinja2 as a renderer in our Pyramid applications.

Objectives

• Show Pyramid’s support for different templating systems.

• Learn about installing Pyramid add-ons.

Steps

1. In this step let’s start by copying the view_class step’s directory, and then installing the
pyramid_jinja2 add-on.

$ cd ..; cp -r view_classes jinja2; cd jinja2


$ $VENV/bin/pip install -e .
$ $VENV/bin/pip install pyramid_jinja2

2. We need to include pyramid_jinja2 in jinja2/tutorial/__init__.py:

114 Contents
The Pyramid Web Framework, Version 1.9.4

1 from pyramid.config import Configurator


2

4 def main(global_config, **settings):


5 config = Configurator(settings=settings)
6 config.include('pyramid_jinja2')
7 config.add_route('home', '/')
8 config.add_route('hello', '/howdy')
9 config.scan('.views')
10 return config.make_wsgi_app()

3. Our jinja2/tutorial/views.py simply changes its renderer:

1 from pyramid.view import (


2 view_config,
3 view_defaults
4 )
5

7 @view_defaults(renderer='home.jinja2')
8 class TutorialViews:
9 def __init__(self, request):
10 self.request = request
11

12 @view_config(route_name='home')
13 def home(self):
14 return {'name': 'Home View'}
15

16 @view_config(route_name='hello')
17 def hello(self):
18 return {'name': 'Hello View'}

4. Add jinja2/tutorial/home.jinja2 as a template:

<!DOCTYPE html>
<html lang="en">
<head>
<title>Quick Tutorial: {{ name }}</title>
</head>
<body>
(continues on next page)

0.2. Tutorials 115


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


<h1>Hi {{ name }}</h1>
</body>
</html>

5. Now run the tests:

$ $VENV/bin/py.test tutorial/tests.py -q
....
4 passed in 0.40 seconds

6. Run your Pyramid application with:

$ $VENV/bin/pserve development.ini --reload

7. Open http://localhost:6543/ in your browser.

Analysis

Getting a Pyramid add-on into Pyramid is simple. First you use normal Python package installation tools
to install the add-on package into your Python virtual environment. You then tell Pyramid’s configurator
to run the setup code in the add-on. In this case the setup code told Pyramid to make a new ”renderer”
available that looked for .jinja2 file extensions.

Our view code stayed largely the same. We simply changed the file extension on the renderer. For the
template, the syntax for Chameleon and Jinja2’s basic variable insertion is very similar.

Extra credit

1. Our project now depends on pyramid_jinja2. We installed that dependency manually. What
is another way we could have made the association?

2. We used config.include which is an imperative configuration to get the Configurator to load


pyramid_jinja2’s configuration. What is another way we could include it into the config?

See also:

Jinja2 homepage, and pyramid_jinja2 Overview

116 Contents
The Pyramid Web Framework, Version 1.9.4

13: CSS/JS/Images Files With Static Assets

Of course the Web is more than just markup. You need static assets: CSS, JS, and images. Let’s point our
web app at a directory where Pyramid will serve some static assets.

Objectives

• Publish a directory of static assets at a URL.

• Use Pyramid to help generate URLs to files in that directory.

Steps

1. First we copy the results of the view_classes step:

$ cd ..; cp -r view_classes static_assets; cd static_assets


$ $VENV/bin/pip install -e .

2. We add a call config.add_static_view in static_assets/tutorial/__init__.


py:

1 from pyramid.config import Configurator


2

4 def main(global_config, **settings):


5 config = Configurator(settings=settings)
6 config.include('pyramid_chameleon')
7 config.add_route('home', '/')
8 config.add_route('hello', '/howdy')
9 config.add_static_view(name='static', path='tutorial:static
,→')

10 config.scan('.views')
11 return config.make_wsgi_app()

3. We can add a CSS link in the <head> of our template at static_assets/tutorial/home.


pt:

0.2. Tutorials 117


The Pyramid Web Framework, Version 1.9.4

<!DOCTYPE html>
<html lang="en">
<head>
<title>Quick Tutorial: ${name}</title>
<link rel="stylesheet"
href="${request.static_url('tutorial:static/app.css')␣
,→}"/>

</head>
<body>
<h1>Hi ${name}</h1>
</body>
</html>

4. Add a CSS file at static_assets/tutorial/static/app.css:

body {
margin: 2em;
font-family: sans-serif;
}

5. We add a functional test that asserts that the newly added static file is delivered:

46 def test_css(self):
47 res = self.testapp.get('/static/app.css', status=200)
48 self.assertIn(b'body', res.body)

6. Now run the tests:

$ $VENV/bin/py.test tutorial/tests.py -q
....
5 passed in 0.50 seconds

7. Run your Pyramid application with:

$ $VENV/bin/pserve development.ini --reload

8. Open http://localhost:6543/ in your browser and note the new font.

118 Contents
The Pyramid Web Framework, Version 1.9.4

Analysis

We changed our WSGI application to map requests under http://localhost:6543/static/ to files and directo-
ries inside a static directory inside our tutorial package. This directory contained app.css.

We linked to the CSS in our template. We could have hard-coded this link to /static/app.css. But
what if the site is later moved under /somesite/static/? Or perhaps the web developer changes the
arrangement on disk? Pyramid gives a helper that provides flexibility on URL generation:

${request.static_url('tutorial:static/app.css')}

This matches the path='tutorial:static' in our config.add_static_view registration.


By using request.static_url to generate the full URL to the static assets, you both ensure you stay
in sync with the configuration and gain refactoring flexibility later.

Extra credit

1. There is also a request.static_path API. How does this differ from request.
static_url?

See also:

Static Assets, Preventing HTTP Caching, and Influencing HTTP Caching

14: AJAX Development With JSON Renderers

Modern web apps are more than rendered HTML. Dynamic pages now use JavaScript to update the UI in
the browser by requesting server data as JSON. Pyramid supports this with a JSON renderer.

Background

As we saw in 08: HTML Generation With Templating, view declarations can specify a renderer. Output
from the view is then run through the renderer, which generates and returns the response. We first used a
Chameleon renderer, then a Jinja2 renderer.

Renderers aren’t limited, however, to templates that generate HTML. Pyramid supplies a JSON renderer
which takes Python data, serializes it to JSON, and performs some other functions such as setting the
content type. In fact you can write your own renderer (or extend a built-in renderer) containing custom
logic for your unique application.

0.2. Tutorials 119


The Pyramid Web Framework, Version 1.9.4

Steps

1. First we copy the results of the view_classes step:

$ cd ..; cp -r view_classes json; cd json


$ $VENV/bin/pip install -e .

2. We add a new route for hello_json in json/tutorial/__init__.py:

1 from pyramid.config import Configurator


2

4 def main(global_config, **settings):


5 config = Configurator(settings=settings)
6 config.include('pyramid_chameleon')
7 config.add_route('home', '/')
8 config.add_route('hello', '/howdy')
9 config.add_route('hello_json', '/howdy.json')
10 config.scan('.views')
11 return config.make_wsgi_app()

3. Rather than implement a new view, we will ”stack” another decorator on the hello view in views.
py:

1 from pyramid.view import (


2 view_config,
3 view_defaults
4 )
5

7 @view_defaults(renderer='home.pt')
8 class TutorialViews:
9 def __init__(self, request):
10 self.request = request
11

12 @view_config(route_name='home')
13 def home(self):
14 return {'name': 'Home View'}
15

16 @view_config(route_name='hello')
(continues on next page)

120 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


17 @view_config(route_name='hello_json', renderer='json')
18 def hello(self):
19 return {'name': 'Hello View'}

4. We need a new functional test at the end of json/tutorial/tests.py:

1 import unittest
2

3 from pyramid import testing


4

6 class TutorialViewTests(unittest.TestCase):
7 def setUp(self):
8 self.config = testing.setUp()
9

10 def tearDown(self):
11 testing.tearDown()
12

13 def test_home(self):
14 from .views import TutorialViews
15

16 request = testing.DummyRequest()
17 inst = TutorialViews(request)
18 response = inst.home()
19 self.assertEqual('Home View', response['name'])
20

21 def test_hello(self):
22 from .views import TutorialViews
23

24 request = testing.DummyRequest()
25 inst = TutorialViews(request)
26 response = inst.hello()
27 self.assertEqual('Hello View', response['name'])
28

29

30 class TutorialFunctionalTests(unittest.TestCase):
31 def setUp(self):
32 from tutorial import main
33 app = main({})
34 from webtest import TestApp
35

(continues on next page)

0.2. Tutorials 121


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


36 self.testapp = TestApp(app)
37

38 def test_home(self):
39 res = self.testapp.get('/', status=200)
40 self.assertIn(b'<h1>Hi Home View', res.body)
41

42 def test_hello(self):
43 res = self.testapp.get('/howdy', status=200)
44 self.assertIn(b'<h1>Hi Hello View', res.body)
45

46 def test_hello_json(self):
47 res = self.testapp.get('/howdy.json', status=200)
48 self.assertIn(b'{"name": "Hello View"}', res.body)
49 self.assertEqual(res.content_type, 'application/json')
50

5. Run the tests:

$ $VENV/bin/py.test tutorial/tests.py -q
.....
5 passed in 0.47 seconds

6. Run your Pyramid application with:

$ $VENV/bin/pserve development.ini --reload

7. Open http://localhost:6543/howdy.json in your browser and you will see the resulting JSON re-
sponse.

Analysis

Earlier we changed our view functions and methods to return Python data. This change to a data-oriented
view layer made test writing easier, decoupling the templating from the view logic.

Since Pyramid has a JSON renderer as well as the templating renderers, it is an easy step to return JSON.
In this case we kept the exact same view and arranged to return a JSON encoding of the view data. We did
this by:

122 Contents
The Pyramid Web Framework, Version 1.9.4

• Adding a route to map /howdy.json to a route name.


• Providing a @view_config that associated that route name with an existing view.
• Overriding the view defaults in the view config that mentions the hello_json route, so that
when the route is matched, we use the JSON renderer rather than the home.pt template renderer
that would otherwise be used.
In fact, for pure AJAX-style web applications, we could re-use the existing route by using Pyramid’s view
predicates to match on the Accepts: header sent by modern AJAX implementations.
Pyramid’s JSON renderer uses the base Python JSON encoder, thus inheriting its strengths and weaknesses.
For example, Python can’t natively JSON encode DateTime objects. There are a number of solutions for
this in Pyramid, including extending the JSON renderer with a custom renderer.
See also:
Writing View Callables Which Use a Renderer, JSON Renderer, and Adding and Changing Renderers

15: More With View Classes

Group views into a class, sharing configuration, state, and logic.

Background

As part of its mission to help build more ambitious web applications, Pyramid provides many more features
for views and view classes.
The Pyramid documentation discusses views as a Python ”callable”. This callable can be a function, an
object with a __call__, or a Python class. In this last case, methods on the class can be decorated with
@view_config to register the class methods with the configurator as a view.
At first, our views were simple, free-standing functions. Many times your views are related: different ways
to look at or work on the same data, or a REST API that handles multiple operations. Grouping these
together as a view class makes sense:
• Group views.
• Centralize some repetitive defaults.
• Share some state and helpers.
Pyramid views have view predicates that determine which view is matched to a request, based on factors
such as the request method, the form parameters, and so on. These predicates provide many axes of
flexibility.
The following shows a simple example with four operations: view a home page which leads to a form, save
a change, and press the delete button.

0.2. Tutorials 123


The Pyramid Web Framework, Version 1.9.4

Objectives

• Group related views into a view class.

• Centralize configuration with class-level @view_defaults.

• Dispatch one route/URL to multiple views based on request data.

• Share states and logic between views and templates via the view class.

Steps

1. First we copy the results of the previous step:

$ cd ..; cp -r templating more_view_classes; cd more_view_


,→classes

$ $VENV/bin/pip install -e .

2. Our route in more_view_classes/tutorial/__init__.py needs some replacement pat-


terns:

1 from pyramid.config import Configurator


2

4 def main(global_config, **settings):


5 config = Configurator(settings=settings)
6 config.include('pyramid_chameleon')
7 config.add_route('home', '/')
8 config.add_route('hello', '/howdy/{first}/{last}')
9 config.scan('.views')
10 return config.make_wsgi_app()

3. Our more_view_classes/tutorial/views.py now has a view class with several views:

124 Contents
The Pyramid Web Framework, Version 1.9.4

1 from pyramid.view import (


2 view_config,
3 view_defaults
4 )
5

7 @view_defaults(route_name='hello')
8 class TutorialViews(object):
9 def __init__(self, request):
10 self.request = request
11 self.view_name = 'TutorialViews'
12

13 @property
14 def full_name(self):
15 first = self.request.matchdict['first']
16 last = self.request.matchdict['last']
17 return first + ' ' + last
18

19 @view_config(route_name='home', renderer='home.pt')
20 def home(self):
21 return {'page_title': 'Home View'}
22

23 # Retrieving /howdy/first/last the first time


24 @view_config(renderer='hello.pt')
25 def hello(self):
26 return {'page_title': 'Hello View'}
27

28 # Posting to /howdy/first/last via the "Edit" submit button


29 @view_config(request_method='POST', renderer='edit.pt')
30 def edit(self):
31 new_name = self.request.params['new_name']
32 return {'page_title': 'Edit View', 'new_name': new_name}
33

34 # Posting to /howdy/first/last via the "Delete" submit␣


,→button
35 @view_config(request_method='POST', request_param='form.
,→delete',

36 renderer='delete.pt')
37 def delete(self):
38 print ('Deleted')
39 return {'page_title': 'Delete View'}

0.2. Tutorials 125


The Pyramid Web Framework, Version 1.9.4

4. Our primary view needs a template at more_view_classes/tutorial/home.pt:

<!DOCTYPE html>
<html lang="en">
<head>
<title>Quick Tutorial: ${view.view_name} - ${page_title}</
,→title>

</head>
<body>
<h1>${view.view_name} - ${page_title}</h1>

<p>Go to the <a href="${request.route_url('hello', first='jane',


last='doe')}">form</a>.</p>
</body>
</html>

5. Ditto for our other view from the previous section at more_view_classes/tutorial/
hello.pt:

<!DOCTYPE html>
<html lang="en">
<head>
<title>Quick Tutorial: ${view.view_name} - ${page_title}</
,→title>

</head>
<body>
<h1>${view.view_name} - ${page_title}</h1>
<p>Welcome, ${view.full_name}</p>
<form method="POST"
action="${request.current_route_url()}">
<input name="new_name"/>
<input type="submit" name="form.edit" value="Save"/>
<input type="submit" name="form.delete" value="Delete"/>
</form>
</body>
</html>

6. We have an edit view that also needs a template at more_view_classes/tutorial/edit.


pt:

126 Contents
The Pyramid Web Framework, Version 1.9.4

<!DOCTYPE html>
<html lang="en">
<head>
<title>Quick Tutorial: ${view.view_name} - ${page_title}</
,→title>

</head>
<body>
<h1>${view.view_name} - ${page_title}</h1>
<p>You submitted <code>${new_name}</code></p>
</body>
</html>

7. And finally the delete view’s template at more_view_classes/tutorial/delete.pt:

<!DOCTYPE html>
<html lang="en">
<head>
<title>Quick Tutorial: ${page_title}</title>
</head>
<body>
<h1>${view.view_name} - ${page_title}</h1>
</body>
</html>

8. Our tests in more_view_classes/tutorial/tests.py fail, so let’s modify them:

1 import unittest
2

3 from pyramid import testing


4

6 class TutorialViewTests(unittest.TestCase):
7 def setUp(self):
8 self.config = testing.setUp()
9

10 def tearDown(self):
11 testing.tearDown()
12

13 def test_home(self):
14 from .views import TutorialViews
(continues on next page)

0.2. Tutorials 127


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


15

16 request = testing.DummyRequest()
17 inst = TutorialViews(request)
18 response = inst.home()
19 self.assertEqual('Home View', response['page_title'])
20

21 class TutorialFunctionalTests(unittest.TestCase):
22 def setUp(self):
23 from tutorial import main
24 app = main({})
25 from webtest import TestApp
26

27 self.testapp = TestApp(app)
28

29 def test_home(self):
30 res = self.testapp.get('/', status=200)
31 self.assertIn(b'TutorialViews - Home View', res.body)

9. Now run the tests:

$ $VENV/bin/py.test tutorial/tests.py -q
..
2 passed in 0.40 seconds

10. Run your Pyramid application with:

$ $VENV/bin/pserve development.ini --reload

11. Open http://localhost:6543/howdy/jane/doe in your browser. Click the Save and Delete buttons,
and watch the output in the console window.

Analysis

As you can see, the four views are logically grouped together. Specifically:

• We have a home view available at http://localhost:6543/ with a clickable link to the hello view.

128 Contents
The Pyramid Web Framework, Version 1.9.4

• The second view is returned when you go to /howdy/jane/doe. This URL is mapped to the
hello route that we centrally set using the optional @view_defaults.

• The third view is returned when the form is submitted with a POST method. This rule is specified
in the @view_config for that view.

• The fourth view is returned when clicking on a button such as <input type="submit"
name="form.delete" value="Delete"/>.

In this step we show, using the following information as criteria, how to decide which view to use:

• Method of the HTTP request (GET, POST, etc.)

• Parameter information in the request (submitted form field names)

We also centralize part of the view configuration to the class level with @view_defaults, then in one
view, override that default just for that one view. Finally, we put this commonality between views to work
in the view class by sharing:

• State assigned in TutorialViews.__init__

• A computed value

These are then available both in the view methods and in the templates (e.g., ${view.view_name}
and ${view.full_name}).

As a note, we made a switch in our templates on how we generate URLs. We previously hardcoded the
URLs, such as:

<a href="/howdy/jane/doe">Howdy</a>

In home.pt we switched to:

<a href="${request.route_url('hello', first='jane',


last='doe')}">form</a>

Pyramid has rich facilities to help generate URLs in a flexible, non-error prone fashion.

0.2. Tutorials 129


The Pyramid Web Framework, Version 1.9.4

Extra credit

1. Why could our template do ${view.full_name} and not have to do ${view.


full_name()}?

2. The edit and delete views are both receive POST requests. Why does the edit view configu-
ration not catch the POST used by delete?

3. We used Python @property on full_name. If we reference this many times in a template or


view code, it would re-compute this every time. Does Pyramid provide something that will cache
the initial computation on a property?

4. Can you associate more than one route with the same view?

5. There is also a request.route_path API. How does this differ from request.
route_url?

See also:

Defining a View Callable as a Class, Weird Stuff You Can Do With URL Dispatch

16: Collecting Application Info With Logging

Capture debugging and error output from your web applications using standard Python logging.

Background

It’s important to know what is going on inside our web application. In development we might need to
collect some output. In production, we might need to detect problems when other people use the site. We
need logging.

Fortunately Pyramid uses the normal Python approach to logging. The project generated in your
development.ini has a number of lines that configure the logging for you to some reasonable de-
faults. You then see messages sent by Pyramid, for example, when a new request comes in.

130 Contents
The Pyramid Web Framework, Version 1.9.4

Objectives

• Inspect the configuration setup used for logging.

• Add logging statements to your view code.

Steps

1. First we copy the results of the view_classes step:

$ cd ..; cp -r view_classes logging; cd logging


$ $VENV/bin/pip install -e .

2. Extend logging/tutorial/views.py to log a message:

1 import logging
2 log = logging.getLogger(__name__)
3

4 from pyramid.view import (


5 view_config,
6 view_defaults
7 )
8

10 @view_defaults(renderer='home.pt')
11 class TutorialViews:
12 def __init__(self, request):
13 self.request = request
14

15 @view_config(route_name='home')
16 def home(self):
17 log.debug('In home view')
18 return {'name': 'Home View'}
19

20 @view_config(route_name='hello')
21 def hello(self):
22 log.debug('In hello view')
23 return {'name': 'Hello View'}

0.2. Tutorials 131


The Pyramid Web Framework, Version 1.9.4

3. Finally let’s edit development.ini configuration file to enable logging for our Pyramid appli-
cation:

[app:main]
use = egg:tutorial
pyramid.reload_templates = true
pyramid.includes =
pyramid_debugtoolbar

[server:main]
use = egg:waitress#main
listen = localhost:6543

# Begin logging configuration

[loggers]
keys = root, tutorial

[logger_tutorial]
level = DEBUG
handlers =
qualname = tutorial

[handlers]
keys = console

[formatters]
keys = generic

[logger_root]
level = INFO
handlers = console

[handler_console]
class = StreamHandler
args = (sys.stderr,)
level = NOTSET
formatter = generic

[formatter_generic]
format = %(asctime)s %(levelname)-5.5s [%(name)s][
,→%(threadName)s] %(message)s

(continues on next page)

132 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)

# End logging configuration

4. Make sure the tests still pass:

$ $VENV/bin/py.test tutorial/tests.py -q
....
4 passed in 0.41 seconds

5. Run your Pyramid application with:

$ $VENV/bin/pserve development.ini --reload

6. Open http://localhost:6543/ and http://localhost:6543/howdy in your browser. Note, both in the


console and in the debug toolbar, the message that you logged.

Analysis

In our configuration file development.ini, our tutorial Python package is set up as a logger and
configured to log messages at a DEBUG or higher level. When you visit http://localhost:6543, your console
will now show:

2013-08-09 10:42:42,968 DEBUG [tutorial.views][MainThread] In home␣


,→view

Also, if you have configured your Pyramid application to use the pyramid_debugtoolbar, logging
statements appear in one of its menus.

See also:

See also Logging.

17: Transient Data Using Sessions

Store and retrieve non-permanent data in Pyramid sessions.

0.2. Tutorials 133


The Pyramid Web Framework, Version 1.9.4

Background

When people use your web application, they frequently perform a task that requires semi-permanent data
to be saved. For example, a shopping cart. This is called a session.

Pyramid has basic built-in support for sessions. Third party packages such as pyramid_redis_sessions
provide richer session support. Or you can create your own custom sessioning engine. Let’s take a look at
the built-in sessioning support.

Objectives

• Make a session factory using a built-in, simple Pyramid sessioning system.

• Change our code to use a session.

Steps

1. First we copy the results of the view_classes step:

$ cd ..; cp -r view_classes sessions; cd sessions


$ $VENV/bin/pip install -e .

2. Our sessions/tutorial/__init__.py needs a choice of session factory to get registered


with the configurator:

1 from pyramid.config import Configurator


2 from pyramid.session import SignedCookieSessionFactory
3

5 def main(global_config, **settings):


6 my_session_factory = SignedCookieSessionFactory(
7 'itsaseekreet')
8 config = Configurator(settings=settings,
9 session_factory=my_session_factory)
10 config.include('pyramid_chameleon')
11 config.add_route('home', '/')
12 config.add_route('hello', '/howdy')
13 config.scan('.views')
14 return config.make_wsgi_app()

134 Contents
The Pyramid Web Framework, Version 1.9.4

3. Our views in sessions/tutorial/views.py can now use request.session:

1 from pyramid.view import (


2 view_config,
3 view_defaults
4 )
5

7 @view_defaults(renderer='home.pt')
8 class TutorialViews:
9 def __init__(self, request):
10 self.request = request
11

12 @property
13 def counter(self):
14 session = self.request.session
15 if 'counter' in session:
16 session['counter'] += 1
17 else:
18 session['counter'] = 1
19

20 return session['counter']
21

22

23 @view_config(route_name='home')
24 def home(self):
25 return {'name': 'Home View'}
26

27 @view_config(route_name='hello')
28 def hello(self):
29 return {'name': 'Hello View'}

4. The template at sessions/tutorial/home.pt can display the value:

1 <!DOCTYPE html>
2 <html lang="en">
3 <head>
4 <title>Quick Tutorial: ${name}</title>
5 </head>
6 <body>
7 <h1>Hi ${name}</h1>
8 <p>Count: ${view.counter}</p>
(continues on next page)

0.2. Tutorials 135


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


9 </body>
10 </html>

5. Make sure the tests still pass:

$ $VENV/bin/py.test tutorial/tests.py -q
....
4 passed in 0.42 seconds

6. Run your Pyramid application with:

$ $VENV/bin/pserve development.ini --reload

7. Open http://localhost:6543/ and http://localhost:6543/howdy in your browser. As you reload and


switch between those URLs, note that the counter increases and is not specific to the URL.

8. Restart the application and revisit the page. Note that counter still increases from where it left off.

Analysis

Pyramid’s request object now has a session attribute that we can use in our view code. It acts like a
dictionary.

Since all the views are using the same counter, we made the counter a Python property at the view class
level. With this, each reload will increase the counter displayed in our template.

In web development, ”flash messages” are notes for the user that need to appear on a screen after a future
web request. For example, when you add an item using a form POST, the site usually issues a second
HTTP Redirect web request to view the new item. You might want a message to appear after that second
web request saying ”Your item was added.” You can’t just return it in the web response for the POST, as it
will be tossed out during the second web request.

Flash messages are a technique where messages can be stored between requests, using sessions, then re-
moved when they finally get displayed.

See also:

Sessions, Flash Messages, and pyramid.session.

136 Contents
The Pyramid Web Framework, Version 1.9.4

18: Forms and Validation with Deform

Schema-driven, autogenerated forms with validation.

Background

Modern web applications deal extensively with forms. Developers, though, have a wide range of philoso-
phies about how frameworks should help them with their forms. As such, Pyramid doesn’t directly bundle
one particular form library. Instead there are a variety of form libraries that are easy to use in Pyramid.

Deform is one such library. In this step, we introduce Deform for our forms. This also gives us Colander
for schemas and validation.

Objectives

• Make a schema using Colander, the companion to Deform.

• Create a form with Deform and change our views to handle validation.

Steps

1. First we copy the results of the view_classes step:

$ cd ..; cp -r view_classes forms; cd forms

2. Let’s edit forms/setup.py to declare a dependency on Deform (which then pulls in Colander
as a dependency:

1 from setuptools import setup


2

3 requires = [
4 'deform',
5 'pyramid',
6 'pyramid_chameleon',
7 'waitress',
(continues on next page)

0.2. Tutorials 137


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


8 ]
9

10 setup(name='tutorial',
11 install_requires=requires,
12 entry_points="""\
13 [paste.app_factory]
14 main = tutorial:main
15 """,
16 )

3. We can now install our project in development mode:

$ $VENV/bin/pip install -e .

4. Register a static view in forms/tutorial/__init__.py for Deform’s CSS, JavaScript, etc.,


as well as our demo wiki page’s views:

1 from pyramid.config import Configurator


2

4 def main(global_config, **settings):


5 config = Configurator(settings=settings)
6 config.include('pyramid_chameleon')
7 config.add_route('wiki_view', '/')
8 config.add_route('wikipage_add', '/add')
9 config.add_route('wikipage_view', '/{uid}')
10 config.add_route('wikipage_edit', '/{uid}/edit')
11 config.add_static_view('deform_static', 'deform:static/')
12 config.scan('.views')
13 return config.make_wsgi_app()

5. Implement the new views, as well as the form schemas and some dummy data, in forms/
tutorial/views.py:

1 import colander
2 import deform.widget
3

4 from pyramid.httpexceptions import HTTPFound


5 from pyramid.view import view_config
(continues on next page)

138 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


6

7 pages = {
8 '100': dict(uid='100', title='Page 100', body='<em>100</em>
,→'),

9 '101': dict(uid='101', title='Page 101', body='<em>101</em>


,→'),

10 '102': dict(uid='102', title='Page 102', body='<em>102</em>


,→')

11 }
12

13 class WikiPage(colander.MappingSchema):
14 title = colander.SchemaNode(colander.String())
15 body = colander.SchemaNode(
16 colander.String(),
17 widget=deform.widget.RichTextWidget()
18 )
19

20

21 class WikiViews(object):
22 def __init__(self, request):
23 self.request = request
24

25 @property
26 def wiki_form(self):
27 schema = WikiPage()
28 return deform.Form(schema, buttons=('submit',))
29

30 @property
31 def reqts(self):
32 return self.wiki_form.get_widget_resources()
33

34 @view_config(route_name='wiki_view', renderer='wiki_view.pt
,→')
35 def wiki_view(self):
36 return dict(pages=pages.values())
37

38 @view_config(route_name='wikipage_add',
39 renderer='wikipage_addedit.pt')
40 def wikipage_add(self):
41 form = self.wiki_form.render()
42

(continues on next page)

0.2. Tutorials 139


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


43 if 'submit' in self.request.params:
44 controls = self.request.POST.items()
45 try:
46 appstruct = self.wiki_form.validate(controls)
47 except deform.ValidationFailure as e:
48 # Form is NOT valid
49 return dict(form=e.render())
50

51 # Form is valid, make a new identifier and add to␣


list
,→

52 last_uid = int(sorted(pages.keys())[-1])
53 new_uid = str(last_uid + 1)
54 pages[new_uid] = dict(
55 uid=new_uid, title=appstruct['title'],
56 body=appstruct['body']
57 )
58

59 # Now visit new page


60 url = self.request.route_url('wikipage_view',␣
,→uid=new_uid)

61 return HTTPFound(url)
62

63 return dict(form=form)
64

65 @view_config(route_name='wikipage_view', renderer='wikipage_
view.pt')
,→

66 def wikipage_view(self):
67 uid = self.request.matchdict['uid']
68 page = pages[uid]
69 return dict(page=page)
70

71 @view_config(route_name='wikipage_edit',
72 renderer='wikipage_addedit.pt')
73 def wikipage_edit(self):
74 uid = self.request.matchdict['uid']
75 page = pages[uid]
76

77 wiki_form = self.wiki_form
78

79 if 'submit' in self.request.params:
80 controls = self.request.POST.items()
(continues on next page)

140 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


81 try:
82 appstruct = wiki_form.validate(controls)
83 except deform.ValidationFailure as e:
84 return dict(page=page, form=e.render())
85

86 # Change the content and redirect to the view


87 page['title'] = appstruct['title']
88 page['body'] = appstruct['body']
89

90 url = self.request.route_url('wikipage_view',
91 uid=page['uid'])
92 return HTTPFound(url)
93

94 form = wiki_form.render(page)
95

96 return dict(page=page, form=form)

6. A template for the top of the ”wiki” in forms/tutorial/wiki_view.pt:

1 <!DOCTYPE html>
2 <html lang="en">
3 <head>
4 <title>Wiki: View</title>
5 </head>
6 <body>
7 <h1>Wiki</h1>
8

9 <a href="${request.route_url('wikipage_add')}">Add
10 WikiPage</a>
11 <ul>
12 <li tal:repeat="page pages">
13 <a href="${request.route_url('wikipage_view', uid=page.
,→uid)}">

14 ${page.title}
15 </a>
16 </li>
17 </ul>
18 </body>
19 </html>

7. Another template for adding/editing in forms/tutorial/wikipage_addedit.pt:

0.2. Tutorials 141


The Pyramid Web Framework, Version 1.9.4

1 <!DOCTYPE html>
2 <html lang="en">
3 <head>
4 <title>WikiPage: Add/Edit</title>
5 <link rel="stylesheet"
6 href="${request.static_url('deform:static/css/
,→bootstrap.min.css')}"

7 type="text/css" media="screen" charset="utf-8"/>


8 <link rel="stylesheet"
9 href="${request.static_url('deform:static/css/form.css
,→')}"

10 type="text/css"/>
11 <tal:block tal:repeat="reqt view.reqts['css']">
12 <link rel="stylesheet" type="text/css"
13 href="${request.static_url(reqt)}"/>
14 </tal:block>
15 <script src="${request.static_url('deform:static/scripts/
,→jquery-2.0.3.min.js')}"

16 type="text/javascript"></script>
17 <script src="${request.static_url('deform:static/scripts/
,→bootstrap.min.js')}"

18 type="text/javascript"></script>
19

20 <tal:block tal:repeat="reqt view.reqts['js']">


21 <script src="${request.static_url(reqt)}"
22 type="text/javascript"></script>
23 </tal:block>
24 </head>
25 <body>
26 <h1>Wiki</h1>
27

28 <p>${structure: form}</p>
29 <script type="text/javascript">
30 deform.load()
31 </script>
32 </body>
33 </html>

8. Add a template at forms/tutorial/wikipage_view.pt for viewing a wiki page:

142 Contents
The Pyramid Web Framework, Version 1.9.4

1 <!DOCTYPE html>
2 <html lang="en">
3 <head>
4 <title>WikiPage: View</title>
5 </head>
6 <body>
7 <a href="${request.route_url('wiki_view')}">
8 Up
9 </a> |
10 <a href="${request.route_url('wikipage_edit', uid=page.uid)}">
11 Edit
12 </a>
13

14 <h1>${page.title}</h1>
15 <p>${structure: page.body}</p>
16 </body>
17 </html>

9. Our tests in forms/tutorial/tests.py don’t run, so let’s modify them:

1 import unittest
2

3 from pyramid import testing


4

6 class TutorialViewTests(unittest.TestCase):
7 def setUp(self):
8 self.config = testing.setUp()
9

10 def tearDown(self):
11 testing.tearDown()
12

13 def test_home(self):
14 from .views import WikiViews
15

16 request = testing.DummyRequest()
17 inst = WikiViews(request)
18 response = inst.wiki_view()
19 self.assertEqual(len(response['pages']), 3)
20

21

(continues on next page)

0.2. Tutorials 143


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


22 class TutorialFunctionalTests(unittest.TestCase):
23 def setUp(self):
24 from tutorial import main
25

26 app = main({})
27 from webtest import TestApp
28

29 self.testapp = TestApp(app)
30

31 def tearDown(self):
32 testing.tearDown()
33

34 def test_home(self):
35 res = self.testapp.get('/', status=200)
36 self.assertIn(b'<title>Wiki: View</title>', res.body)

10. Run the tests:

$ $VENV/bin/py.test tutorial/tests.py -q
..
2 passed in 0.45 seconds

11. Run your Pyramid application with:

$ $VENV/bin/pserve development.ini --reload

12. Open http://localhost:6543/ in a browser.

Analysis

This step helps illustrate the utility of asset specifications for static assets. We have an outside package
called Deform with static assets which need to be published. We don’t have to know where on disk it is
located. We point at the package, then the path inside the package.

We just need to include a call to add_static_view to make that directory available at a URL. For
Pyramid-specific packages, Pyramid provides a facility (config.include()) which even makes that
unnecessary for consumers of a package. (Deform is not specific to Pyramid.)

144 Contents
The Pyramid Web Framework, Version 1.9.4

Our forms have rich widgets which need the static CSS and JavaScript just mentioned. Deform
has a resource registry which allows widgets to specify which JavaScript and CSS are needed. Our
wikipage_addedit.pt template shows how we iterated over that data to generate markup that in-
cludes the needed resources.

Our add and edit views use a pattern called self-posting forms. Meaning, the same URL is used to GET
the form as is used to POST the form. The route, the view, and the template are the same URL whether
you are walking up to it for the first time or you clicked a button.

Inside the view we do if 'submit' in self.request.params: to see if this form was a POST
where the user clicked on a particular button <input name="submit">.

The form controller then follows a typical pattern:

• If you are doing a GET, skip over and just return the form.

• If you are doing a POST, validate the form contents.

• If the form is invalid, bail out by re-rendering the form with the supplied POST data.

• If the validation succeeded, perform some action and issue a redirect via HTTPFound.

We are, in essence, writing our own form controller. Other Pyramid-based systems, including
pyramid_deform, provide a form-centric view class which automates much of this branching and rout-
ing.

Extra credit

1. Give a try at a button that goes to a delete view for a particular wiki page.

19: Databases Using SQLAlchemy

Store and retrieve data using the SQLAlchemy ORM atop the SQLite database.

0.2. Tutorials 145


The Pyramid Web Framework, Version 1.9.4

Background

Our Pyramid-based wiki application now needs database-backed storage of pages. This frequently means
an SQL database. The Pyramid community strongly supports the SQLAlchemy project and its object-
relational mapper (ORM) as a convenient, Pythonic way to interface to databases.

In this step we hook up SQLAlchemy to a SQLite database table, providing storage and retrieval for the
wiki pages in the previous step.

The pyramid-cookiecutter-alchemy cookiecutter is really helpful for getting an


SQLAlchemy project going, including generation of the console script. Since we want to see all the deci-
sions, we will forgo convenience in this tutorial, and wire it up ourselves.

Objectives

• Store pages in SQLite by using SQLAlchemy models.

• Use SQLAlchemy queries to list/add/view/edit pages.

• Provide a database-initialize command by writing a Pyramid console script which can be run from
the command line.

Steps

1. We are going to use the forms step as our starting point:

$ cd ..; cp -r forms databases; cd databases

2. We need to add some dependencies in databases/setup.py as well as an ”entry point” for the
command-line script:

146 Contents
The Pyramid Web Framework, Version 1.9.4

1 from setuptools import setup


2

3 requires = [
4 'deform',
5 'pyramid',
6 'pyramid_chameleon',
7 'pyramid_tm',
8 'sqlalchemy',
9 'waitress',
10 'zope.sqlalchemy',
11 ]
12

13 setup(name='tutorial',
14 install_requires=requires,
15 entry_points="""\
16 [paste.app_factory]
17 main = tutorial:main
18 [console_scripts]
19 initialize_tutorial_db = tutorial.initialize_db:main
20 """,
21 )

We aren’t yet doing $VENV/bin/pip install -e . as we will change it later.

3. Our configuration file at databases/development.ini wires together some new pieces:

[app:main]
use = egg:tutorial
pyramid.reload_templates = true
pyramid.includes =
pyramid_debugtoolbar
pyramid_tm

sqlalchemy.url = sqlite:///%(here)s/sqltutorial.sqlite

[server:main]
use = egg:waitress#main
listen = localhost:6543

(continues on next page)

0.2. Tutorials 147


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


# Begin logging configuration

[loggers]
keys = root, tutorial, sqlalchemy.engine.base.Engine

[logger_tutorial]
level = DEBUG
handlers =
qualname = tutorial

[handlers]
keys = console

[formatters]
keys = generic

[logger_root]
level = INFO
handlers = console

[logger_sqlalchemy.engine.base.Engine]
level = INFO
handlers =
qualname = sqlalchemy.engine.base.Engine

[handler_console]
class = StreamHandler
args = (sys.stderr,)
level = NOTSET
formatter = generic

[formatter_generic]
format = %(asctime)s %(levelname)-5.5s [%(name)s][
,→%(threadName)s] %(message)s

# End logging configuration

4. This engine configuration now needs to be read into the application through changes in
databases/tutorial/__init__.py:

148 Contents
The Pyramid Web Framework, Version 1.9.4

1 from pyramid.config import Configurator


2

3 from sqlalchemy import engine_from_config


4

5 from .models import DBSession, Base


6

7 def main(global_config, **settings):


8 engine = engine_from_config(settings, 'sqlalchemy.')
9 DBSession.configure(bind=engine)
10 Base.metadata.bind = engine
11

12 config = Configurator(settings=settings,
13 root_factory='tutorial.models.Root')
14 config.include('pyramid_chameleon')
15 config.add_route('wiki_view', '/')
16 config.add_route('wikipage_add', '/add')
17 config.add_route('wikipage_view', '/{uid}')
18 config.add_route('wikipage_edit', '/{uid}/edit')
19 config.add_static_view('deform_static', 'deform:static/')
20 config.scan('.views')
21 return config.make_wsgi_app()

5. Make a command-line script at databases/tutorial/initialize_db.py to initialize the


database:

1 import os
2 import sys
3 import transaction
4

5 from sqlalchemy import engine_from_config


6

7 from pyramid.paster import (


8 get_appsettings,
9 setup_logging,
10 )
11

12 from .models import (


13 DBSession,
14 Page,
15 Base,
16 )
(continues on next page)

0.2. Tutorials 149


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


17

18

19 def usage(argv):
20 cmd = os.path.basename(argv[0])
21 print('usage: %s <config_uri>\n'
22 '(example: "%s development.ini")' % (cmd, cmd))
23 sys.exit(1)
24

25

26 def main(argv=sys.argv):
27 if len(argv) != 2:
28 usage(argv)
29 config_uri = argv[1]
30 setup_logging(config_uri)
31 settings = get_appsettings(config_uri)
32 engine = engine_from_config(settings, 'sqlalchemy.')
33 DBSession.configure(bind=engine)
34 Base.metadata.create_all(engine)
35 with transaction.manager:
36 model = Page(title='Root', body='<p>Root</p>')
37 DBSession.add(model)

6. Since setup.py changed, we now run it:

$ $VENV/bin/pip install -e .

7. The script references some models in databases/tutorial/models.py:

1 from pyramid.security import Allow, Everyone


2

3 from sqlalchemy import (


4 Column,
5 Integer,
6 Text,
7 )
8

9 from sqlalchemy.ext.declarative import declarative_base


10

11 from sqlalchemy.orm import (


12 scoped_session,
(continues on next page)

150 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


13 sessionmaker,
14 )
15

16 from zope.sqlalchemy import ZopeTransactionExtension


17

18 DBSession = scoped_session(
19 sessionmaker(extension=ZopeTransactionExtension()))
20 Base = declarative_base()
21

22

23 class Page(Base):
24 __tablename__ = 'wikipages'
25 uid = Column(Integer, primary_key=True)
26 title = Column(Text, unique=True)
27 body = Column(Text)
28

29

30 class Root(object):
31 __acl__ = [(Allow, Everyone, 'view'),
32 (Allow, 'group:editors', 'edit')]
33

34 def __init__(self, request):


35 pass

8. Let’s run this console script, thus producing our database and table:

$ $VENV/bin/initialize_tutorial_db development.ini

2016-04-16 13:01:33,055 INFO [sqlalchemy.engine.base.


,→Engine][MainThread] SELECT CAST('test plain returns' AS␣

,→VARCHAR(60)) AS anon_1

2016-04-16 13:01:33,055 INFO [sqlalchemy.engine.base.


,→Engine][MainThread] ()

2016-04-16 13:01:33,056 INFO [sqlalchemy.engine.base.


,→Engine][MainThread] SELECT CAST('test unicode returns' AS␣

,→VARCHAR(60)) AS anon_1

2016-04-16 13:01:33,056 INFO [sqlalchemy.engine.base.


,→Engine][MainThread] ()

2016-04-16 13:01:33,057 INFO [sqlalchemy.engine.base.


,→Engine][MainThread] PRAGMA table_info("wikipages")

2016-04-16 13:01:33,057 INFO [sqlalchemy.engine.base.


,→Engine][MainThread] ()
(continues on next page)

0.2. Tutorials 151


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


2016-04-16 13:01:33,058 INFO [sqlalchemy.engine.base.
,→Engine][MainThread]

CREATE TABLE wikipages (


uid INTEGER NOT NULL,
title TEXT,
body TEXT,
PRIMARY KEY (uid),
UNIQUE (title)
)

2016-04-16 13:01:33,058 INFO [sqlalchemy.engine.base.


,→Engine][MainThread] ()

2016-04-16 13:01:33,059 INFO [sqlalchemy.engine.base.


,→Engine][MainThread] COMMIT

2016-04-16 13:01:33,062 INFO [sqlalchemy.engine.base.


,→Engine][MainThread] BEGIN (implicit)

2016-04-16 13:01:33,062 INFO [sqlalchemy.engine.base.


,→Engine][MainThread] INSERT INTO wikipages (title, body)␣

,→VALUES (?, ?)

2016-04-16 13:01:33,063 INFO [sqlalchemy.engine.base.


,→Engine][MainThread] ('Root', '<p>Root</p>')

2016-04-16 13:01:33,063 INFO [sqlalchemy.engine.base.


,→Engine][MainThread] COMMIT

9. With our data now driven by SQLAlchemy queries, we need to update our databases/
tutorial/views.py:

1 import colander
2 import deform.widget
3

4 from pyramid.httpexceptions import HTTPFound


5 from pyramid.view import view_config
6

7 from .models import DBSession, Page


8

10 class WikiPage(colander.MappingSchema):
11 title = colander.SchemaNode(colander.String())
12 body = colander.SchemaNode(
13 colander.String(),
(continues on next page)

152 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


14 widget=deform.widget.RichTextWidget()
15 )
16

17

18 class WikiViews(object):
19 def __init__(self, request):
20 self.request = request
21

22 @property
23 def wiki_form(self):
24 schema = WikiPage()
25 return deform.Form(schema, buttons=('submit',))
26

27 @property
28 def reqts(self):
29 return self.wiki_form.get_widget_resources()
30

31 @view_config(route_name='wiki_view', renderer='wiki_view.pt
')
,→

32 def wiki_view(self):
33 pages = DBSession.query(Page).order_by(Page.title)
34 return dict(title='Wiki View', pages=pages)
35

36 @view_config(route_name='wikipage_add',
37 renderer='wikipage_addedit.pt')
38 def wikipage_add(self):
39 form = self.wiki_form.render()
40

41 if 'submit' in self.request.params:
42 controls = self.request.POST.items()
43 try:
44 appstruct = self.wiki_form.validate(controls)
45 except deform.ValidationFailure as e:
46 # Form is NOT valid
47 return dict(form=e.render())
48

49 # Add a new page to the database


50 new_title = appstruct['title']
51 new_body = appstruct['body']
52 DBSession.add(Page(title=new_title, body=new_body))
53

(continues on next page)

0.2. Tutorials 153


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


54 # Get the new ID and redirect
55 page = DBSession.query(Page).filter_by(title=new_
,→title).one()

56 new_uid = page.uid
57

58 url = self.request.route_url('wikipage_view',␣
uid=new_uid)
,→

59 return HTTPFound(url)
60

61 return dict(form=form)
62

63

64 @view_config(route_name='wikipage_view', renderer='wikipage_
view.pt')
,→

65 def wikipage_view(self):
66 uid = int(self.request.matchdict['uid'])
67 page = DBSession.query(Page).filter_by(uid=uid).one()
68 return dict(page=page)
69

70

71 @view_config(route_name='wikipage_edit',
72 renderer='wikipage_addedit.pt')
73 def wikipage_edit(self):
74 uid = int(self.request.matchdict['uid'])
75 page = DBSession.query(Page).filter_by(uid=uid).one()
76

77 wiki_form = self.wiki_form
78

79 if 'submit' in self.request.params:
80 controls = self.request.POST.items()
81 try:
82 appstruct = wiki_form.validate(controls)
83 except deform.ValidationFailure as e:
84 return dict(page=page, form=e.render())
85

86 # Change the content and redirect to the view


87 page.title = appstruct['title']
88 page.body = appstruct['body']
89 url = self.request.route_url('wikipage_view',␣
uid=uid)
,→

90 return HTTPFound(url)
(continues on next page)

154 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


91

92 form = self.wiki_form.render(dict(
93 uid=page.uid, title=page.title, body=page.body)
94 )
95

96 return dict(page=page, form=form)

10. Our tests in databases/tutorial/tests.py changed to include SQLAlchemy bootstrap-


ping:

1 import unittest
2 import transaction
3

4 from pyramid import testing


5

7 def _initTestingDB():
8 from sqlalchemy import create_engine
9 from .models import (
10 DBSession,
11 Page,
12 Base
13 )
14 engine = create_engine('sqlite://')
15 Base.metadata.create_all(engine)
16 DBSession.configure(bind=engine)
17 with transaction.manager:
18 model = Page(title='FrontPage', body='This is the front␣
,→page')

19 DBSession.add(model)
20 return DBSession
21

22

23 class WikiViewTests(unittest.TestCase):
24 def setUp(self):
25 self.session = _initTestingDB()
26 self.config = testing.setUp()
27

28 def tearDown(self):
29 self.session.remove()
30 testing.tearDown()
(continues on next page)

0.2. Tutorials 155


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


31

32 def test_wiki_view(self):
33 from tutorial.views import WikiViews
34

35 request = testing.DummyRequest()
36 inst = WikiViews(request)
37 response = inst.wiki_view()
38 self.assertEqual(response['title'], 'Wiki View')
39

40

41 class WikiFunctionalTests(unittest.TestCase):
42 def setUp(self):
43 from pyramid.paster import get_app
44 app = get_app('development.ini')
45 from webtest import TestApp
46 self.testapp = TestApp(app)
47

48 def tearDown(self):
49 from .models import DBSession
50 DBSession.remove()
51

52 def test_it(self):
53 res = self.testapp.get('/', status=200)
54 self.assertIn(b'Wiki: View', res.body)
55 res = self.testapp.get('/add', status=200)
56 self.assertIn(b'Add/Edit', res.body)

11. Run the tests in your package using py.test:

$ $VENV/bin/py.test tutorial/tests.py -q
..
2 passed in 1.41 seconds

12. Run your Pyramid application with:

$ $VENV/bin/pserve development.ini --reload

13. Open http://localhost:6543/ in a browser.

156 Contents
The Pyramid Web Framework, Version 1.9.4

Analysis

Let’s start with the dependencies. We made the decision to use SQLAlchemy to talk to our database. We
also, though, installed pyramid_tm and zope.sqlalchemy. Why?

Pyramid has a strong orientation towards support for transactions. Specifically, you can install a
transaction manager into your application either as middleware or a Pyramid ”tween”. Then, just before
you return the response, all transaction-aware parts of your application are executed.

This means Pyramid view code usually doesn’t manage transactions. If your view code or a template
generates an error, the transaction manager aborts the transaction. This is a very liberating way to write
code.

The pyramid_tm package provides a ”tween” that is configured in the development.ini config-
uration file. That installs it. We then need a package that makes SQLAlchemy, and thus the RDBMS
transaction manager, integrate with the Pyramid transaction manager. That’s what zope.sqlalchemy
does.

Where do we point at the location on disk for the SQLite file? In the configuration file. This lets consumers
of our package change the location in a safe (non-code) way. That is, in configuration. This configuration-
oriented approach isn’t required in Pyramid; you can still make such statements in your __init__.py
or some companion module.

The initialize_tutorial_db is a nice example of framework support. You point your setup at the
location of some [console_scripts], and these get generated into your virtual environment’s bin
directory. Our console script follows the pattern of being fed a configuration file with all the bootstrapping.
It then opens SQLAlchemy and creates the root of the wiki, which also makes the SQLite file. Note the
with transaction.manager part that puts the work in the scope of a transaction, as we aren’t inside
a web request where this is done automatically.

The models.py does a little bit of extra work to hook up SQLAlchemy into the Pyramid transaction
manager. It then declares the model for a Page.

Our views have changes primarily around replacing our dummy dictionary-of-dictionaries data with proper
database support: list the rows, add a row, edit a row, and delete a row.

Extra credit

1. Why all this code? Why can’t I just type two lines and have magic ensue?

2. Give a try at a button that deletes a wiki page.

0.2. Tutorials 157


The Pyramid Web Framework, Version 1.9.4

20: Logins with authentication

Login views that authenticate a username and password against a list of users.

Background

Most web applications have URLs that allow people to add/edit/delete content via a web browser. Time
to add security to the application. In this first step we introduce authentication. That is, logging in and
logging out, using Pyramid’s rich facilities for pluggable user storage.

In the next step we will introduce protection of resources with authorization security statements.

Objectives

• Introduce the Pyramid concepts of authentication.

• Create login and logout views.

Steps

1. We are going to use the view classes step as our starting point:

$ cd ..; cp -r view_classes authentication; cd authentication

2. Add bcrypt as a dependency in authentication/setup.py:

1 from setuptools import setup


2

3 requires = [
4 'bcrypt',
5 'pyramid',
6 'pyramid_chameleon',
7 'waitress',
8 ]
9

(continues on next page)

158 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


10 setup(name='tutorial',
11 install_requires=requires,
12 entry_points="""\
13 [paste.app_factory]
14 main = tutorial:main
15 """,
16 )

3. We can now install our project in development mode:

$ $VENV/bin/pip install -e .

4. Put the security hash in the authentication/development.ini configuration file as


tutorial.secret instead of putting it in the code:

1 [app:main]
2 use = egg:tutorial
3 pyramid.reload_templates = true
4 pyramid.includes =
5 pyramid_debugtoolbar
6 tutorial.secret = 98zd
7

8 [server:main]
9 use = egg:waitress#main
10 listen = localhost:6543

5. Get authentication (and for now, authorization policies) and login route into the configurator in
authentication/tutorial/__init__.py:

1 from pyramid.authentication import AuthTktAuthenticationPolicy


2 from pyramid.authorization import ACLAuthorizationPolicy
3 from pyramid.config import Configurator
4

5 from .security import groupfinder


6

8 def main(global_config, **settings):


9 config = Configurator(settings=settings)
10 config.include('pyramid_chameleon')
(continues on next page)

0.2. Tutorials 159


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


11

12 # Security policies
13 authn_policy = AuthTktAuthenticationPolicy(
14 settings['tutorial.secret'], callback=groupfinder,
15 hashalg='sha512')
16 authz_policy = ACLAuthorizationPolicy()
17 config.set_authentication_policy(authn_policy)
18 config.set_authorization_policy(authz_policy)
19

20 config.add_route('home', '/')
21 config.add_route('hello', '/howdy')
22 config.add_route('login', '/login')
23 config.add_route('logout', '/logout')
24 config.scan('.views')
25 return config.make_wsgi_app()

6. Create an authentication/tutorial/security.py module that can find our user infor-


mation by providing an authentication policy callback:

1 import bcrypt
2

4 def hash_password(pw):
5 pwhash = bcrypt.hashpw(pw.encode('utf8'), bcrypt.gensalt())
6 return pwhash.decode('utf8')
7

8 def check_password(pw, hashed_pw):


9 expected_hash = hashed_pw.encode('utf8')
10 return bcrypt.checkpw(pw.encode('utf8'), expected_hash)
11

12

13 USERS = {'editor': hash_password('editor'),


14 'viewer': hash_password('viewer')}
15 GROUPS = {'editor': ['group:editors']}
16

17

18 def groupfinder(userid, request):


19 if userid in USERS:
20 return GROUPS.get(userid, [])

7. Update the views in authentication/tutorial/views.py:

160 Contents
The Pyramid Web Framework, Version 1.9.4

1 from pyramid.httpexceptions import HTTPFound


2 from pyramid.security import (
3 remember,
4 forget,
5 )
6

7 from pyramid.view import (


8 view_config,
9 view_defaults
10 )
11

12 from .security import (


13 USERS,
14 check_password
15 )
16

17

18 @view_defaults(renderer='home.pt')
19 class TutorialViews:
20 def __init__(self, request):
21 self.request = request
22 self.logged_in = request.authenticated_userid
23

24 @view_config(route_name='home')
25 def home(self):
26 return {'name': 'Home View'}
27

28 @view_config(route_name='hello')
29 def hello(self):
30 return {'name': 'Hello View'}
31

32 @view_config(route_name='login', renderer='login.pt')
33 def login(self):
34 request = self.request
35 login_url = request.route_url('login')
36 referrer = request.url
37 if referrer == login_url:
38 referrer = '/' # never use login form itself as␣
,→came_from

39 came_from = request.params.get('came_from', referrer)


40 message = ''
41 login = ''
(continues on next page)

0.2. Tutorials 161


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


42 password = ''
43 if 'form.submitted' in request.params:
44 login = request.params['login']
45 password = request.params['password']
46 hashed_pw = USERS.get(login)
47 if hashed_pw and check_password(password, hashed_
pw):
,→

48 headers = remember(request, login)


49 return HTTPFound(location=came_from,
50 headers=headers)
51 message = 'Failed login'
52

53 return dict(
54 name='Login',
55 message=message,
56 url=request.application_url + '/login',
57 came_from=came_from,
58 login=login,
59 password=password,
60 )
61

62 @view_config(route_name='logout')
63 def logout(self):
64 request = self.request
65 headers = forget(request)
66 url = request.route_url('home')
67 return HTTPFound(location=url,
68 headers=headers)

8. Add a login template at authentication/tutorial/login.pt:

1 <!DOCTYPE html>
2 <html lang="en">
3 <head>
4 <title>Quick Tutorial: ${name}</title>
5 </head>
6 <body>
7 <h1>Login</h1>
8 <span tal:replace="message"/>
9

10 <form action="${url}" method="post">


(continues on next page)

162 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


11 <input type="hidden" name="came_from"
12 value="${came_from}"/>
13 <label for="login">Username</label>
14 <input type="text" id="login"
15 name="login"
16 value="${login}"/><br/>
17 <label for="password">Password</label>
18 <input type="password" id="password"
19 name="password"
20 value="${password}"/><br/>
21 <input type="submit" name="form.submitted"
22 value="Log In"/>
23 </form>
24 </body>
25 </html>

9. Provide a login/logout box in authentication/tutorial/home.pt:

1 <!DOCTYPE html>
2 <html lang="en">
3 <head>
4 <title>Quick Tutorial: ${name}</title>
5 </head>
6 <body>
7

8 <div>
9 <a tal:condition="view.logged_in is None"
10 href="${request.application_url}/login">Log In</a>
11 <a tal:condition="view.logged_in is not None"
12 href="${request.application_url}/logout">Logout</a>
13 </div>
14

15 <h1>Hi ${name}</h1>
16 <p>Visit <a href="${request.route_url('hello')}">hello</a></p>
17 </body>
18 </html>

10. Run your Pyramid application with:

0.2. Tutorials 163


The Pyramid Web Framework, Version 1.9.4

$ $VENV/bin/pserve development.ini --reload

11. Open http://localhost:6543/ in a browser.

12. Click the ”Log In” link.

13. Submit the login form with the username editor and the password editor.

14. Note that the ”Log In” link has changed to ”Logout”.

15. Click the ”Logout” link.

Analysis

Unlike many web frameworks, Pyramid includes a built-in but optional security model for authentication
and authorization. This security system is intended to be flexible and support many needs. In this security
model, authentication (who are you) and authorization (what are you allowed to do) are not just pluggable,
but decoupled. To learn one step at a time, we provide a system that identifies users and lets them log out.

In this example we chose to use the bundled AuthTktAuthenticationPolicy policy. We enabled it in our
configuration and provided a ticket-signing secret in our INI file.

Our view class grew a login view. When you reached it via a GET request, it returned a login form. When
reached via POST, it processed the submitted username and password against the ”groupfinder” callable
that we registered in the configuration.

The function hash_password uses a one-way hashing algorithm with a salt on the user’s password
via bcrypt, instead of storing the password in plain text. This is considered to be a ”best practice” for
security.

There are alternative libraries to bcrypt if it is an issue on your system. Just make sure that the
library uses an algorithm approved for storing passwords securely.

The function check_password will compare the two hashed values of the submitted password and the
user’s password stored in the database. If the hashed values are equivalent, then the user is authenticated,
else authentication fails.

In our template, we fetched the logged_in value from the view class. We use this to calculate the
logged-in user, if any. In the template we can then choose to show a login link to anonymous visitors or a
logout link to logged-in users.

164 Contents
The Pyramid Web Framework, Version 1.9.4

Extra credit

1. What is the difference between a user and a principal?

2. Can I use a database behind my groupfinder to look up principals?

3. Once I am logged in, does any user-centric information get jammed onto each request? Use import
pdb; pdb.set_trace() to answer this.

See also:

See also Security, AuthTktAuthenticationPolicy, bcrypt

21: Protecting Resources With Authorization

Assign security statements to resources describing the permissions required to perform an operation.

Background

Our application has URLs that allow people to add/edit/delete content via a web browser. Time to add
security to the application. Let’s protect our add/edit views to require a login (username of editor and
password of editor). We will allow the other views to continue working without a password.

Objectives

• Introduce the Pyramid concepts of authentication, authorization, permissions, and access control
lists (ACLs).

• Make a root factory that returns an instance of our class for the top of the application.

• Assign security statements to our root resource.

• Add a permissions predicate on a view.

• Provide a Forbidden view to handle visiting a URL without adequate permissions.

Steps

1. We are going to use the authentication step as our starting point:

0.2. Tutorials 165


The Pyramid Web Framework, Version 1.9.4

$ cd ..; cp -r authentication authorization; cd authorization


$ $VENV/bin/pip install -e .

2. Start by changing authorization/tutorial/__init__.py to specify a root factory to the


configurator:

1 from pyramid.authentication import AuthTktAuthenticationPolicy


2 from pyramid.authorization import ACLAuthorizationPolicy
3 from pyramid.config import Configurator
4

5 from .security import groupfinder


6

8 def main(global_config, **settings):


9 config = Configurator(settings=settings,
10 root_factory='.resources.Root')
11 config.include('pyramid_chameleon')
12

13 # Security policies
14 authn_policy = AuthTktAuthenticationPolicy(
15 settings['tutorial.secret'], callback=groupfinder,
16 hashalg='sha512')
17 authz_policy = ACLAuthorizationPolicy()
18 config.set_authentication_policy(authn_policy)
19 config.set_authorization_policy(authz_policy)
20

21 config.add_route('home', '/')
22 config.add_route('hello', '/howdy')
23 config.add_route('login', '/login')
24 config.add_route('logout', '/logout')
25 config.scan('.views')
26 return config.make_wsgi_app()

3. That means we need to implement authorization/tutorial/resources.py:

1 from pyramid.security import Allow, Everyone


2

4 class Root(object):
5 __acl__ = [(Allow, Everyone, 'view'),
(continues on next page)

166 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


6 (Allow, 'group:editors', 'edit')]
7

8 def __init__(self, request):


9 pass

4. Change authorization/tutorial/views.py to require the edit permission on the


hello view and implement the forbidden view:

1 from pyramid.httpexceptions import HTTPFound


2 from pyramid.security import (
3 remember,
4 forget,
5 )
6

7 from pyramid.view import (


8 view_config,
9 view_defaults,
10 forbidden_view_config
11 )
12

13 from .security import (


14 USERS,
15 check_password
16 )
17

18

19 @view_defaults(renderer='home.pt')
20 class TutorialViews:
21 def __init__(self, request):
22 self.request = request
23 self.logged_in = request.authenticated_userid
24

25 @view_config(route_name='home')
26 def home(self):
27 return {'name': 'Home View'}
28

29 @view_config(route_name='hello', permission='edit')
30 def hello(self):
31 return {'name': 'Hello View'}
32

33 @view_config(route_name='login', renderer='login.pt')
(continues on next page)

0.2. Tutorials 167


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


34 @forbidden_view_config(renderer='login.pt')
35 def login(self):
36 request = self.request
37 login_url = request.route_url('login')
38 referrer = request.url
39 if referrer == login_url:
40 referrer = '/' # never use login form itself as␣
,→came_from

41 came_from = request.params.get('came_from', referrer)


42 message = ''
43 login = ''
44 password = ''
45 if 'form.submitted' in request.params:
46 login = request.params['login']
47 password = request.params['password']
48 hashed_pw = USERS.get(login)
49 if hashed_pw and check_password(password, hashed_
,→pw):

50 headers = remember(request, login)


51 return HTTPFound(location=came_from,
52 headers=headers)
53 message = 'Failed login'
54

55 return dict(
56 name='Login',
57 message=message,
58 url=request.application_url + '/login',
59 came_from=came_from,
60 login=login,
61 password=password,
62 )
63

64 @view_config(route_name='logout')
65 def logout(self):
66 request = self.request
67 headers = forget(request)
68 url = request.route_url('home')
69 return HTTPFound(location=url,
70 headers=headers)

5. Run your Pyramid application with:

168 Contents
The Pyramid Web Framework, Version 1.9.4

$ $VENV/bin/pserve development.ini --reload

6. Open http://localhost:6543/ in a browser.

7. If you are still logged in, click the ”Log Out” link.

8. Visit http://localhost:6543/howdy in a browser. You should be asked to login.

Analysis

This simple tutorial step can be boiled down to the following:

• A view can require a permission (edit).

• The context for our view (the Root) has an access control list (ACL).

• This ACL says that the edit permission is available on Root to the group:editors principal.

• The registered groupfinder answers whether a particular user (editor) has a particular group
(group:editors).

In summary, hello wants edit permission, Root says group:editors has edit permission.

Of course, this only applies on Root. Some other part of the site (a.k.a. context) might have a different
ACL.

If you are not logged in and visit /howdy, you need to get shown the login screen. How does Pyramid
know what is the login page to use? We explicitly told Pyramid that the login view should be used by
decorating the view with @forbidden_view_config.

Extra credit

1. Do I have to put a renderer in my @forbidden_view_config decorator?

2. Perhaps you would like the experience of not having enough permissions (forbidden) to be richer.
How could you change this?

3. Perhaps we want to store security statements in a database and allow editing via a browser. How
might this be done?

4. What if we want different security statements on different kinds of objects? Or on the same kinds
of objects, but in different parts of a URL hierarchy?

0.2. Tutorials 169


The Pyramid Web Framework, Version 1.9.4

Indices and tables

• genindex

• modindex

• search

0.2.3 SQLAlchemy + URL dispatch wiki tutorial

This tutorial introduces an SQLAlchemy and URL dispatch-based Pyramid application to a developer fa-
miliar with Python. When finished, the developer will have created a basic wiki application with authen-
tication and authorization.

For cut and paste purposes, the source code for all stages of this tutorial can be browsed on GitHub at
GitHub for a specific branch or version under docs/tutorials/wiki2/src, which corresponds to
the same location if you have Pyramid sources.

Background

This version of the Pyramid wiki tutorial presents a Pyramid application that uses technologies which will
be familiar to someone with SQL database experience. It uses SQLAlchemy as a persistence mechanism
and URL dispatch to map URLs to code. It can also be followed by people without any prior Python web
framework experience.

To code along with this tutorial, the developer will need a UNIX machine with development tools (Mac
OS X with XCode, any Linux or BSD variant, etc.) or a Windows system of any kind.

This tutorial runs on both Python 2 and 3 without modification.

Have fun!

Design

Following is a quick overview of the design of our wiki application to help us understand the changes that
we will be making as we work through the tutorial.

170 Contents
The Pyramid Web Framework, Version 1.9.4

Overall

We choose to use reStructuredText markup in the wiki text. Translation from reStructuredText to HTML
is provided by the widely used docutils Python module. We will add this module to the dependency
list in the project’s setup.py file.

Models

We’ll be using an SQLite database to hold our wiki data, and we’ll be using SQLAlchemy to access the
data in this database.

Within the database, we will define two tables:

• The users table which will store the id, name, password_hash and role of each wiki user.

• The pages table, whose elements will store the wiki pages. There are four columns: id, name,
data and creator_id.

There is a one-to-many relationship between users and pages tracking the user who created each wiki
page defined by the creator_id column on the pages table.

URLs like /PageName will try to find an element in the pages table that has a corresponding name.

To add a page to the wiki, a new row is created and the text is stored in data.

A page named FrontPage containing the text ”This is the front page” will be created when the storage
is initialized, and will be used as the wiki home page.

Wiki Views

There will be three views to handle the normal operations of adding, editing, and viewing wiki pages, plus
one view for the wiki front page. Two templates will be used, one for viewing, and one for both adding
and editing wiki pages.

As of version 1.5 Pyramid no longer ships with templating systems. In this tutorial, we will use Jinja2.
Jinja2 is a modern and designer-friendly templating language for Python, modeled after Django’s templates.

0.2. Tutorials 171


The Pyramid Web Framework, Version 1.9.4

Security

We’ll eventually be adding security to our application. To do this, we’ll be using a very simple role-based
security model. We’ll assign a single role category to each user in our system.

basic An authenticated user who can view content and create new pages. A basic user may also edit
the pages they have created but not pages created by other users.

editor An authenticated user who can create and edit any content in the system.

In order to accomplish this we’ll need to define an authentication policy which can identify users by their
userid and role. Then we’ll need to define a page resource which contains the appropriate ACL:

Action Principal Permission


Allow Everyone view
Allow group:basic create
Allow group:editors edit
Allow <creator of page> edit

Permission declarations will be added to the views to assert the security policies as each request is handled.

On the security side of the application there are two additional views for handling login and logout as well
as two exception views for handling invalid access attempts and unhandled URLs.

Summary

The URL, actions, template, and permission associated to each view are listed in the following table:

172 Contents
The Pyramid Web Framework, Version 1.9.4

URL Action View Template Permission


/ Redirect to view_wiki
/FrontPage
/PageName Display existing view_page1 view.jinja2 view
page2
/PageName/edit_pageDisplay edit form edit_page edit.jinja2 edit
with existing con-
tent.
If the form
was submit-
ted, redirect to
/PageName
/add_page/PageNameCreate the page add_page edit.jinja2 create
PageName in
storage, display
the edit form
without content.
If the form
was submit-
ted, redirect to
/PageName
/login Display login login login.jinja2
form, Forbidden3
If the form
was submitted,
authenticate.
• If authen-
tication
succeeds,
redirect to
the page
from which
we came.
• If authenti-
cation fails,
display
login form
with ”login
failed”
message.

/logout Redirect to logout


/FrontPage

0.2. Tutorials 173


The Pyramid Web Framework, Version 1.9.4

Installation

Before you begin

This tutorial assumes that you have already followed the steps in Installing Pyramid, except do not create
a virtual environment or install Pyramid. Thereby you will satisfy the following requirements.
• A Python interpreter is installed on your operating system.
• You’ve satisfied the Requirements for Installing Packages.

Install SQLite3 and its development packages

If you used a package manager to install your Python or if you compiled your Python from source, then
you must install SQLite3 and its development packages. If you downloaded your Python as an installer
from https://www.python.org, then you already have it installed and can skip this step.
If you need to install the SQLite3 packages, then, for example, using the Debian system and apt-get,
the command would be the following:

$ sudo apt-get install libsqlite3-dev

Install cookiecutter

We will use a cookiecutter to create a Python package project from a Python package project template. See
Cookiecutter Installation for instructions.

Generate a Pyramid project from a cookiecutter

We will create a Pyramid project in your home directory for UNIX or at the root for Windows. It is assumed
you know the path to where you installed cookiecutter. Issue the following commands and override
the defaults in the prompts as follows.

On UNIX

2 Pyramid will return a default 404 Not Found page if the page PageName does not exist yet.
1 This is the default view for a Page context when there is no view name.
3 pyramid.exceptions.Forbidden is reached when a user tries to invoke a view that is not authorized by the authorization

policy.

174 Contents
The Pyramid Web Framework, Version 1.9.4

$ cd ~
$ cookiecutter gh:Pylons/pyramid-cookiecutter-alchemy --checkout 1.
,→9-branch

On Windows

c:\> cd \
c:\> cookiecutter gh:Pylons/pyramid-cookiecutter-alchemy --checkout␣
,→1.9-branch

On all operating systems

If prompted for the first item, accept the default yes by hitting return.

You've cloned ~/.cookiecutters/pyramid-cookiecutter-alchemy before.


Is it okay to delete and re-clone it? [yes]: yes
project_name [Pyramid Scaffold]: myproj
repo_name [myproj]: tutorial

Change directory into your newly created project

On UNIX

$ cd tutorial

On Windows

c:\> cd tutorial

0.2. Tutorials 175


The Pyramid Web Framework, Version 1.9.4

Set and use a VENV environment variable

We will set the VENV environment variable to the absolute path of the virtual environment, and use it going
forward.

On UNIX

$ export VENV=~/tutorial

On Windows

c:\tutorial> set VENV=c:\tutorial

Create a virtual environment

On UNIX

$ python3 -m venv $VENV

On Windows

Each version of Python uses different paths, so you will need to adjust the path to the command for your
Python version. Recent versions of the Python 3 installer for Windows now install a Python launcher.

Python 2.7:

c:\tutorial> c:\Python27\Scripts\virtualenv %VENV%

Python 3.6:

176 Contents
The Pyramid Web Framework, Version 1.9.4

c:\tutorial> python -m venv %VENV%

Upgrade packaging tools in the virtual environment

On UNIX

$ $VENV/bin/pip install --upgrade pip setuptools

On Windows

c:\tutorial> %VENV%\Scripts\pip install --upgrade pip setuptools

Installing the project in development mode

In order to do development on the project easily, you must ”register” the project as a development egg
in your workspace. We will install testing requirements at the same time. We do so with the following
command.

On UNIX

$ $VENV/bin/pip install -e ".[testing]"

On Windows

c:\tutorial> %VENV%\Scripts\pip install -e ".[testing]"

0.2. Tutorials 177


The Pyramid Web Framework, Version 1.9.4

On all operating systems

The console will show pip checking for packages and installing missing packages. Success executing this
command will show a line like the following:

Successfully installed Jinja2-2.8 Mako-1.0.6 MarkupSafe-0.23 \


PasteDeploy-1.5.2 Pygments-2.1.3 SQLAlchemy-1.1.4 WebOb-1.6.3 \
WebTest-2.0.24 beautifulsoup4-4.5.1 coverage-4.2 py-1.4.32 pyramid-
,→1.7.3 \

pyramid-debugtoolbar-3.0.5 pyramid-jinja2-2.7 pyramid-mako-1.0.2 \


pyramid-tm-1.1.1 pytest-3.0.5 pytest-cov-2.4.0 repoze.lru-0.6 six-1.
,→10.0 \

transaction-2.0.3 translationstring-1.3 tutorial venusian-1.0 \


waitress-1.0.1 zope.deprecation-4.2.0 zope.interface-4.3.3 \
zope.sqlalchemy-0.7.7

Testing requirements are defined in our project’s setup.py file, in the tests_require and
extras_require stanzas.

24 tests_require = [
25 'WebTest >= 1.3.1', # py3 compat
26 'pytest',
27 'pytest-cov',
28 ]

48 extras_require={
49 'testing': tests_require,
50 },

Run the tests

After you’ve installed the project in development mode as well as the testing requirements, you may run
the tests for the project. The following commands provide options to py.test that specify the module for
which its tests shall be run, and to run py.test in quiet mode.

On UNIX

178 Contents
The Pyramid Web Framework, Version 1.9.4

$ $VENV/bin/py.test -q

On Windows

c:\tutorial> %VENV%\Scripts\py.test -q

For a successful test run, you should see output that ends like this:

..
2 passed in 0.44 seconds

Expose test coverage information

You can run the py.test command to see test coverage information. This runs the tests in the same way
that py.test does, but provides additional coverage information, exposing which lines of your project
are covered by the tests.

We’ve already installed the pytest-cov package into our virtual environment, so we can run the tests
with coverage.

On UNIX

$ $VENV/bin/py.test --cov --cov-report=term-missing

On Windows

c:\tutorial> %VENV%\Scripts\py.test --cov --cov-report=term-missing

If successful, you will see output something like this:

0.2. Tutorials 179


The Pyramid Web Framework, Version 1.9.4

======================== test session starts␣


,→========================

platform Python 3.6.0, pytest-3.0.5, py-1.4.31, pluggy-0.4.0


rootdir: /Users/stevepiercy/tutorial, inifile:
plugins: cov-2.4.0
collected 2 items

tutorial/tests.py ..
------------------ coverage: platform Python 3.6.0 -----------------
,→-

Name Stmts Miss Cover Missing


----------------------------------------------------------------
tutorial/__init__.py 8 6 25% 7-12
tutorial/models/__init__.py 22 0 100%
tutorial/models/meta.py 5 0 100%
tutorial/models/mymodel.py 8 0 100%
tutorial/routes.py 3 2 33% 2-3
tutorial/scripts/__init__.py 0 0 100%
tutorial/scripts/initializedb.py 26 16 38% 22-25, 29-
,→45

tutorial/views/__init__.py 0 0 100%
tutorial/views/default.py 12 0 100%
tutorial/views/notfound.py 4 2 50% 6-7
----------------------------------------------------------------
TOTAL 88 26 70%
===================== 2 passed in 0.57 seconds␣
,→======================

Our package doesn’t quite have 100% test coverage.

Test and coverage cookiecutter defaults

Cookiecutters include configuration defaults for py.test and test coverage. These configuration files
are pytest.ini and .coveragerc, located at the root of your package. Without these defaults, we
would need to specify the path to the module on which we want to run tests and coverage.

On UNIX

180 Contents
The Pyramid Web Framework, Version 1.9.4

$ $VENV/bin/py.test --cov=tutorial tutorial/tests.py -q

On Windows

c:\tutorial> %VENV%\Scripts\py.test --cov=tutorial tutorial\tests.


,→py -q

py.test follows conventions for Python test discovery, and the configuration defaults from the cookiecutter
tell py.test where to find the module on which we want to run tests and coverage.

See also:

See py.test’s documentation for Usage and Invocations or invoke py.test -h to see its full set of options.

Initializing the database

We need to use the initialize_tutorial_db console script to initialize our database.

The initialize_tutorial_db command does not perform a migration, but rather it simply
creates missing tables and adds some dummy data. If you already have a database, you should delete it
before running initialize_tutorial_db again.

Type the following command, making sure you are still in the tutorial directory (the directory with a
development.ini in it):

On UNIX

$ $VENV/bin/initialize_tutorial_db development.ini

On Windows

0.2. Tutorials 181


The Pyramid Web Framework, Version 1.9.4

c:\tutorial> %VENV%\Scripts\initialize_tutorial_db development.ini

The output to your console should be something like this:

2016-12-18 21:30:08,675 INFO [sqlalchemy.engine.base.


,→Engine:1235][MainThread] SELECT CAST('test plain returns' AS␣

,→VARCHAR(60)) AS anon_1

2016-12-18 21:30:08,675 INFO [sqlalchemy.engine.base.


,→Engine:1236][MainThread] ()

2016-12-18 21:30:08,676 INFO [sqlalchemy.engine.base.


,→Engine:1235][MainThread] SELECT CAST('test unicode returns' AS␣

,→VARCHAR(60)) AS anon_1

2016-12-18 21:30:08,676 INFO [sqlalchemy.engine.base.


,→Engine:1236][MainThread] ()

2016-12-18 21:30:08,676 INFO [sqlalchemy.engine.base.


,→Engine:1140][MainThread] PRAGMA table_info("models")

2016-12-18 21:30:08,676 INFO [sqlalchemy.engine.base.


,→Engine:1143][MainThread] ()

2016-12-18 21:30:08,677 INFO [sqlalchemy.engine.base.


,→Engine:1140][MainThread]

CREATE TABLE models (


id INTEGER NOT NULL,
name TEXT,
value INTEGER,
CONSTRAINT pk_models PRIMARY KEY (id)
)

2016-12-18 21:30:08,677 INFO [sqlalchemy.engine.base.


,→Engine:1143][MainThread] ()

2016-12-18 21:30:08,678 INFO [sqlalchemy.engine.base.


,→Engine:719][MainThread] COMMIT

2016-12-18 21:30:08,679 INFO [sqlalchemy.engine.base.


,→Engine:1140][MainThread] CREATE UNIQUE INDEX my_index ON models␣

,→(name)

2016-12-18 21:30:08,679 INFO [sqlalchemy.engine.base.


,→Engine:1143][MainThread] ()

2016-12-18 21:30:08,679 INFO [sqlalchemy.engine.base.


,→Engine:719][MainThread] COMMIT

2016-12-18 21:30:08,681 INFO [sqlalchemy.engine.base.


,→Engine:679][MainThread] BEGIN (implicit)

2016-12-18 21:30:08,682 INFO [sqlalchemy.engine.base.


,→Engine:1140][MainThread] INSERT INTO models (name, value) VALUES␣

,→(?, ?)
(continues on next page)

182 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


2016-12-18 21:30:08,682 INFO [sqlalchemy.engine.base.
,→Engine:1143][MainThread] ('one', 1)

2016-12-18 21:30:08,682 INFO [sqlalchemy.engine.base.


,→Engine:719][MainThread] COMMIT

Success! You should now have a tutorial.sqlite file in your current working directory. This is an
SQLite database with a single table defined in it (models).

Start the application

Start the application. See What Is This pserve Thing for more information on pserve.

On UNIX

$ $VENV/bin/pserve development.ini --reload

On Windows

c:\tutorial> %VENV%\Scripts\pserve development.ini --reload

Your OS firewall, if any, may pop up a dialog asking for authorization to allow python to accept
incoming network connections.

If successful, you will see something like this on your console:

Starting subprocess with file monitor


Starting server in PID 44078.
Serving on http://localhost:6543
Serving on http://localhost:6543

This means the server is ready to accept requests.

0.2. Tutorials 183


The Pyramid Web Framework, Version 1.9.4

Visit the application in a browser

In a browser, visit http://localhost:6543/. You will see the generated application’s default page.

One thing you’ll notice is the ”debug toolbar” icon on right hand side of the page. You can read more about
the purpose of the icon at The Debug Toolbar. It allows you to get information about your application while
you develop.

Decisions the alchemy cookiecutter has made for you

Creating a project using the alchemy cookiecutter makes the following assumptions:

• You are willing to use SQLite for persistent storage, although almost any SQL database could be
used with SQLAlchemy.

• You are willing to use SQLAlchemy for a database access tool.

• You are willing to use URL dispatch to map URLs to code.

• You want to use zope.sqlalchemy, pyramid_tm, and the transaction packages to scope sessions to
requests.

• You want to use pyramid_jinja2 to render your templates. Different templating engines can be used,
but we had to choose one to make this tutorial. See Available Add-On Template System Bindings for
some options.

Pyramid supports any persistent storage mechanism (e.g., object database or filesystem files). It also
supports an additional mechanism to map URLs to code (traversal). However, for the purposes of this
tutorial, we’ll only be using URL dispatch and SQLAlchemy.

Basic Layout

The starter files generated by the alchemy cookiecutter are very basic, but they provide a good orientation
for the high-level patterns common to most URL dispatch-based Pyramid projects.

184 Contents
The Pyramid Web Framework, Version 1.9.4

Application configuration with __init__.py

A directory on disk can be turned into a Python package by containing an __init__.py file. Even if
empty, this marks a directory as a Python package. We use __init__.py both as a marker, indicating
the directory in which it’s contained is a package, and to contain application configuration code.

Open tutorial/__init__.py. It should already contain the following:

1 from pyramid.config import Configurator


2

4 def main(global_config, **settings):


5 """ This function returns a Pyramid WSGI application.
6 """
7 config = Configurator(settings=settings)
8 config.include('pyramid_jinja2')
9 config.include('.models')
10 config.include('.routes')
11 config.scan()
12 return config.make_wsgi_app()

Let’s go over this piece-by-piece. First we need some imports to support later code:

1 from pyramid.config import Configurator


2

__init__.py defines a function named main. Here is the entirety of the main function we’ve defined
in our __init__.py:

4 def main(global_config, **settings):


5 """ This function returns a Pyramid WSGI application.
6 """
7 config = Configurator(settings=settings)
8 config.include('pyramid_jinja2')
9 config.include('.models')
10 config.include('.routes')
11 config.scan()
12 return config.make_wsgi_app()

0.2. Tutorials 185


The Pyramid Web Framework, Version 1.9.4

When you invoke the pserve development.ini command, the main function above is executed.
It accepts some settings and returns a WSGI application. (See Startup for more about pserve.)

Next in main, construct a Configurator object:

7 config = Configurator(settings=settings)

settings is passed to the Configurator as a keyword argument with the dictionary values passed
as the **settings argument. This will be a dictionary of settings parsed from the .ini file, which
contains deployment-related values, such as pyramid.reload_templates, sqlalchemy.url,
and so on.

Next include Jinja2 templating bindings so that we can use renderers with the .jinja2 extension within
our project.

8 config.include('pyramid_jinja2')

Next include the package models using a dotted Python path. The exact setup of the models will be
covered later.

9 config.include('.models')

Next include the routes module using a dotted Python path. This module will be explained in the next
section.

10 config.include('.routes')

Pyramid’s pyramid.config.Configurator.include() method is the primary mecha-


nism for extending the configurator and breaking your code into feature-focused modules.

main next calls the scan method of the configurator (pyramid.config.Configurator.


scan()), which will recursively scan our tutorial package, looking for @view_config and other
special decorators. When it finds a @view_config decorator, a view configuration will be registered,
allowing one of our application URLs to be mapped to some code.

11 config.scan()

Finally main is finished configuring things, so it uses the pyramid.config.Configurator.


make_wsgi_app() method to return a WSGI application:

186 Contents
The Pyramid Web Framework, Version 1.9.4

12 return config.make_wsgi_app()

Route declarations

Open the tutorial/routes.py file. It should already contain the following:

1 def includeme(config):
2 config.add_static_view('static', 'static', cache_max_age=3600)
3 config.add_route('home', '/')

On line 2, we call pyramid.config.Configurator.add_static_view() with three argu-


ments: static (the name), static (the path), and cache_max_age (a keyword argument).

This registers a static resource view which will match any URL that starts with the prefix /static
(by virtue of the first argument to add_static_view). This will serve up static resources for us from
within the static directory of our tutorial package, in this case via http://localhost:6543/
static/ and below (by virtue of the second argument to add_static_view). With this declaration,
we’re saying that any URL that starts with /static should go to the static view; any remainder of its
path (e.g., the /foo in /static/foo) will be used to compose a path to a static file resource, such as a
CSS file.

On line 3, the module registers a route configuration via the pyramid.config.Configurator.


add_route() method that will be used when the URL is /. Since this route has a pattern equaling
/, it is the route that will be matched when the URL / is visited, e.g., http://localhost:6543/.

View declarations via the views package

The main function of a web framework is mapping each URL pattern to code (a view callable) that is
executed when the requested URL matches the corresponding route. Our application uses the pyramid.
view.view_config() decorator to perform this mapping.

Open tutorial/views/default.py in the views package. It should already contain the follow-
ing:

0.2. Tutorials 187


The Pyramid Web Framework, Version 1.9.4

1 from pyramid.response import Response


2 from pyramid.view import view_config
3

4 from sqlalchemy.exc import DBAPIError


5

6 from ..models import MyModel


7

9 @view_config(route_name='home', renderer='../templates/mytemplate.
,→jinja2')

10 def my_view(request):
11 try:
12 query = request.dbsession.query(MyModel)
13 one = query.filter(MyModel.name == 'one').first()
14 except DBAPIError:
15 return Response(db_err_msg, content_type='text/plain',␣
,→status=500)

16 return {'one': one, 'project': 'myproj'}


17

18

19 db_err_msg = """\
20 Pyramid is having a problem using your SQL database. The problem
21 might be caused by one of the following things:
22

23 1. You may need to run the "initialize_tutorial_db" script


24 to initialize your database tables. Check your virtual
25 environment's "bin" directory for this script and try to run it.
26

27 2. Your database server may not be running. Check that the


28 database server referred to by the "sqlalchemy.url" setting in
29 your "development.ini" file is running.
30

31 After you fix the problem, please restart the Pyramid application to
32 try it again.
33 """

The important part here is that the @view_config decorator associates the function it decorates
(my_view) with a view configuration, consisting of:

• a route_name (home)

• a renderer, which is a template from the templates subdirectory of the package.

188 Contents
The Pyramid Web Framework, Version 1.9.4

When the pattern associated with the home view is matched during a request, my_view() will be
executed. my_view() returns a dictionary; the renderer will use the templates/mytemplate.
jinja2 template to create a response based on the values in the dictionary.

Note that my_view() accepts a single argument named request. This is the standard call signature
for a Pyramid view callable.

Remember in our __init__.py when we executed the pyramid.config.Configurator.


scan() method config.scan()? The purpose of calling the scan method was to find and process
this @view_config decorator in order to create a view configuration within our application. Without
being processed by scan, the decorator effectively does nothing. @view_config is inert without being
detected via a scan.

The sample my_view() created by the cookiecutter uses a try: and except: clause to detect if there
is a problem accessing the project database and provide an alternate error response. That response will
include the text shown at the end of the file, which will be displayed in the browser to inform the user
about possible actions to take to solve the problem.

Content models with the models package

In an SQLAlchemy-based application, a model object is an object composed by querying the SQL database.
The models package is where the alchemy cookiecutter put the classes that implement our models.

First, open tutorial/models/meta.py, which should already contain the following:

1 from sqlalchemy.ext.declarative import declarative_base


2 from sqlalchemy.schema import MetaData
3

4 # Recommended naming convention used by Alembic, as various␣


,→different database

5 # providers will autogenerate vastly different names making␣


,→migrations more

6 # difficult. See: http://alembic.zzzcomputing.com/en/latest/naming.


,→html

7 NAMING_CONVENTION = {
8 "ix": "ix_%(column_0_label)s",
9 "uq": "uq_%(table_name)s_%(column_0_name)s",
10 "ck": "ck_%(table_name)s_%(constraint_name)s",
11 "fk": "fk_%(table_name)s_%(column_0_name)s_%(referred_table_
,→name)s",

12 "pk": "pk_%(table_name)s"
(continues on next page)

0.2. Tutorials 189


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


13 }
14

15 metadata = MetaData(naming_convention=NAMING_CONVENTION)
16 Base = declarative_base(metadata=metadata)

meta.py contains imports and support code for defining the models. We create a dictionary
NAMING_CONVENTION as well for consistent naming of support objects like indices and constraints.

1 from sqlalchemy.ext.declarative import declarative_base


2 from sqlalchemy.schema import MetaData
3

4 # Recommended naming convention used by Alembic, as various␣


,→different database

5 # providers will autogenerate vastly different names making␣


,→migrations more

6 # difficult. See: http://alembic.zzzcomputing.com/en/latest/naming.


,→html

7 NAMING_CONVENTION = {
8 "ix": "ix_%(column_0_label)s",
9 "uq": "uq_%(table_name)s_%(column_0_name)s",
10 "ck": "ck_%(table_name)s_%(constraint_name)s",
11 "fk": "fk_%(table_name)s_%(column_0_name)s_%(referred_table_
,→name)s",

12 "pk": "pk_%(table_name)s"
13 }
14

Next we create a metadata object from the class sqlalchemy.schema.MetaData, using


NAMING_CONVENTION as the value for the naming_convention argument.

A MetaData object represents the table and other schema definitions for a single database. We also need
to create a declarative Base object to use as a base class for our models. Our models will inherit from this
Base, which will attach the tables to the metadata we created, and define our application’s database
schema.

15 metadata = MetaData(naming_convention=NAMING_CONVENTION)
16 Base = declarative_base(metadata=metadata)

Next open tutorial/models/mymodel.py, which should already contain the following:

190 Contents
The Pyramid Web Framework, Version 1.9.4

1 from sqlalchemy import (


2 Column,
3 Index,
4 Integer,
5 Text,
6 )
7

8 from .meta import Base


9

10

11 class MyModel(Base):
12 __tablename__ = 'models'
13 id = Column(Integer, primary_key=True)
14 name = Column(Text)
15 value = Column(Integer)
16

17

18 Index('my_index', MyModel.name, unique=True, mysql_length=255)

Notice we’ve defined the models as a package to make it straightforward for defining models in separate
modules. To give a simple example of a model class, we have defined one named MyModel in mymodel.
py:

11 class MyModel(Base):
12 __tablename__ = 'models'
13 id = Column(Integer, primary_key=True)
14 name = Column(Text)
15 value = Column(Integer)

Our example model does not require an __init__ method because SQLAlchemy supplies for us a default
constructor, if one is not already present, which accepts keyword arguments of the same name as that of
the mapped attributes.

Example usage of MyModel:

johnny = MyModel(name="John Doe", value=10)

The MyModel class has a __tablename__ attribute. This informs SQLAlchemy which table to use to
store the data representing instances of this class.

0.2. Tutorials 191


The Pyramid Web Framework, Version 1.9.4

Finally, open tutorial/models/__init__.py, which should already contain the following:

1 from sqlalchemy import engine_from_config


2 from sqlalchemy.orm import sessionmaker
3 from sqlalchemy.orm import configure_mappers
4 import zope.sqlalchemy
5

6 # import or define all models here to ensure they are attached to␣
,→the

7 # Base.metadata prior to any initialization routines


8 from .mymodel import MyModel # flake8: noqa
9

10 # run configure_mappers after defining all of the models to ensure


11 # all relationships can be setup
12 configure_mappers()
13

14

15 def get_engine(settings, prefix='sqlalchemy.'):


16 return engine_from_config(settings, prefix)
17

18

19 def get_session_factory(engine):
20 factory = sessionmaker()
21 factory.configure(bind=engine)
22 return factory
23

24

25 def get_tm_session(session_factory, transaction_manager):


26 """
27 Get a ``sqlalchemy.orm.Session`` instance backed by a␣
,→transaction.

28

29 This function will hook the session to the transaction manager␣


,→which
30 will take care of committing any changes.
31

32 - When using pyramid_tm it will automatically be committed or␣


,→aborted
33 depending on whether an exception is raised.
34

35 - When using scripts you should wrap the session in a manager␣


,→yourself.
(continues on next page)

192 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


36 For example::
37

38 import transaction
39

40 engine = get_engine(settings)
41 session_factory = get_session_factory(engine)
42 with transaction.manager:
43 dbsession = get_tm_session(session_factory,␣
,→transaction.manager)

44

45 """
46 dbsession = session_factory()
47 zope.sqlalchemy.register(
48 dbsession, transaction_manager=transaction_manager)
49 return dbsession
50

51

52 def includeme(config):
53 """
54 Initialize the model for a Pyramid app.
55

56 Activate this setup using ``config.include('tutorial.models')``.


57

58 """
59 settings = config.get_settings()
60 settings['tm.manager_hook'] = 'pyramid_tm.explicit_manager'
61

62 # use pyramid_tm to hook the transaction lifecycle to the␣


,→ request
63 config.include('pyramid_tm')
64

65 # use pyramid_retry to retry a request when transient␣


,→ exceptions occur
66 config.include('pyramid_retry')
67

68 session_factory = get_session_factory(get_engine(settings))
69 config.registry['dbsession_factory'] = session_factory
70

71 # make request.dbsession available for use in Pyramid


72 config.add_request_method(
73 # r.tm is the transaction manager used by pyramid_tm
(continues on next page)

0.2. Tutorials 193


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


74 lambda r: get_tm_session(session_factory, r.tm),
75 'dbsession',
76 reify=True
77 )

Our models/__init__.py module defines the primary API we will use for configuring the database
connections within our application, and it contains several functions we will cover below.

As we mentioned above, the purpose of the models.meta.metadata object is to describe the schema
of the database. This is done by defining models that inherit from the Base object attached to that
metadata object. In Python, code is only executed if it is imported, and so to attach the models
table defined in mymodel.py to the metadata, we must import it. If we skip this step, then later, when
we run sqlalchemy.schema.MetaData.create_all(), the table will not be created because
the metadata object does not know about it!

Another important reason to import all of the models is that, when defining relationships between
models, they must all exist in order for SQLAlchemy to find and build those internal mappings.
This is why, after importing all the models, we explicitly execute the function sqlalchemy.orm.
configure_mappers(), once we are sure all the models have been defined and before we start creating
connections.

Next we define several functions for connecting to our database. The first and lowest level is
the get_engine function. This creates an SQLAlchemy database engine using sqlalchemy.
engine_from_config() from the sqlalchemy.-prefixed settings in the development.ini
file’s [app:main] section. This setting is a URI (something like sqlite://).

15 def get_engine(settings, prefix='sqlalchemy.'):


16 return engine_from_config(settings, prefix)

The function get_session_factory accepts an SQLAlchemy database engine, and creates a


session_factory from the SQLAlchemy class sqlalchemy.orm.session.sessionmaker.
This session_factory is then used for creating sessions bound to the database engine.

19 def get_session_factory(engine):
20 factory = sessionmaker()
21 factory.configure(bind=engine)
22 return factory

The function get_tm_session registers a database session with a transaction manager, and returns a
dbsession object. With the transaction manager, our application will automatically issue a transaction
commit after every request, unless an exception is raised, in which case the transaction will be aborted.

194 Contents
The Pyramid Web Framework, Version 1.9.4

25 def get_tm_session(session_factory, transaction_manager):


26 """
27 Get a ``sqlalchemy.orm.Session`` instance backed by a␣
,→transaction.

28

29 This function will hook the session to the transaction manager␣


,→ which
30 will take care of committing any changes.
31

32 - When using pyramid_tm it will automatically be committed or␣


,→ aborted
33 depending on whether an exception is raised.
34

35 - When using scripts you should wrap the session in a manager␣


,→ yourself.
36 For example::
37

38 import transaction
39

40 engine = get_engine(settings)
41 session_factory = get_session_factory(engine)
42 with transaction.manager:
43 dbsession = get_tm_session(session_factory,␣
,→transaction.manager)

44

45 """
46 dbsession = session_factory()
47 zope.sqlalchemy.register(
48 dbsession, transaction_manager=transaction_manager)
49 return dbsession

Finally, we define an includeme function, which is a hook for use with pyramid.config.
Configurator.include() to activate code in a Pyramid application add-on. It is the code that is ex-
ecuted above when we ran config.include('.models') in our application’s main function. This
function will take the settings from the application, create an engine, and define a request.dbsession
property, which we can use to do work on behalf of an incoming request to our application.

52 def includeme(config):
53 """
54 Initialize the model for a Pyramid app.
55

(continues on next page)

0.2. Tutorials 195


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


56 Activate this setup using ``config.include('tutorial.models')``.
57

58 """
59 settings = config.get_settings()
60 settings['tm.manager_hook'] = 'pyramid_tm.explicit_manager'
61

62 # use pyramid_tm to hook the transaction lifecycle to the␣


request
,→

63 config.include('pyramid_tm')
64

65 # use pyramid_retry to retry a request when transient␣


exceptions occur
,→

66 config.include('pyramid_retry')
67

68 session_factory = get_session_factory(get_engine(settings))
69 config.registry['dbsession_factory'] = session_factory
70

71 # make request.dbsession available for use in Pyramid


72 config.add_request_method(
73 # r.tm is the transaction manager used by pyramid_tm
74 lambda r: get_tm_session(session_factory, r.tm),
75 'dbsession',
76 reify=True
77 )

That’s about all there is to it regarding models, views, and initialization code in our stock application.
The Index import and the Index object creation in mymodel.py is not required for this tutorial, and
will be removed in the next step.

Defining the Domain Model

The first change we’ll make to our stock cookiecutter-generated application will be to define a wiki page
domain model.

There is nothing special about the filename user.py or page.py except that they are Python
modules. A project may have many models throughout its codebase in arbitrarily named modules. Modules
implementing models often have model in their names or they may live in a Python subpackage of your
application package named models (as we’ve done in this tutorial), but this is only a convention and not
a requirement.

196 Contents
The Pyramid Web Framework, Version 1.9.4

Declaring dependencies in our setup.py file

The models code in our application will depend on a package which is not a dependency of the original
”tutorial” application. The original ”tutorial” application was generated by the cookiecutter; it doesn’t
know about our custom application requirements.

We need to add a dependency, the bcrypt package, to our tutorial package’s setup.py file by as-
signing this dependency to the requires parameter in the setup() function.

Open tutorial/setup.py and edit it to look like the following:

1 import os
2

3 from setuptools import setup, find_packages


4

5 here = os.path.abspath(os.path.dirname(__file__))
6 with open(os.path.join(here, 'README.txt')) as f:
7 README = f.read()
8 with open(os.path.join(here, 'CHANGES.txt')) as f:
9 CHANGES = f.read()
10

11 requires = [
12 'bcrypt',
13 'plaster_pastedeploy',
14 'pyramid >= 1.9a',
15 'pyramid_debugtoolbar',
16 'pyramid_jinja2',
17 'pyramid_retry',
18 'pyramid_tm',
19 'SQLAlchemy',
20 'transaction',
21 'zope.sqlalchemy',
22 'waitress',
23 ]
24

25 tests_require = [
26 'WebTest >= 1.3.1', # py3 compat
27 'pytest',
28 'pytest-cov',
29 ]
30

31 setup(
(continues on next page)

0.2. Tutorials 197


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


32 name='tutorial',
33 version='0.0',
34 description='myproj',
35 long_description=README + '\n\n' + CHANGES,
36 classifiers=[
37 'Programming Language :: Python',
38 'Framework :: Pyramid',
39 'Topic :: Internet :: WWW/HTTP',
40 'Topic :: Internet :: WWW/HTTP :: WSGI :: Application',
41 ],
42 author='',
43 author_email='',
44 url='',
45 keywords='web pyramid pylons',
46 packages=find_packages(),
47 include_package_data=True,
48 zip_safe=False,
49 extras_require={
50 'testing': tests_require,
51 },
52 install_requires=requires,
53 entry_points={
54 'paste.app_factory': [
55 'main = tutorial:main',
56 ],
57 'console_scripts': [
58 'initialize_tutorial_db = tutorial.scripts.
,→initializedb:main',

59 ],
60 },
61 )

Only the highlighted line needs to be added.

We are using the bcrypt package from PyPI to hash our passwords securely. There are other
one-way hash algorithms for passwords if bcrypt is an issue on your system. Just make sure that it’s an
algorithm approved for storing passwords versus a generic one-way hash.

198 Contents
The Pyramid Web Framework, Version 1.9.4

Running pip install -e .

Since a new software dependency was added, you will need to run pip install -e . again inside
the root of the tutorial package to obtain and register the newly added dependency distribution.

Make sure your current working directory is the root of the project (the directory in which setup.py
lives) and execute the following command.

On UNIX:

$ $VENV/bin/pip install -e .

On Windows:

c:\tutorial> %VENV%\Scripts\pip install -e .

Success executing this command will end with a line to the console something like the following.

Successfully installed bcrypt-3.1.2 cffi-1.9.1 pycparser-2.17␣


,→tutorial

Remove mymodel.py

Let’s delete the file tutorial/models/mymodel.py. The MyModel class is only a sample and
we’re not going to use it.

Add user.py

Create a new file tutorial/models/user.py with the following contents:

0.2. Tutorials 199


The Pyramid Web Framework, Version 1.9.4

1 import bcrypt
2 from sqlalchemy import (
3 Column,
4 Integer,
5 Text,
6 )
7

8 from .meta import Base


9

10

11 class User(Base):
12 """ The SQLAlchemy declarative model class for a User object. ""
,→"

13 __tablename__ = 'users'
14 id = Column(Integer, primary_key=True)
15 name = Column(Text, nullable=False, unique=True)
16 role = Column(Text, nullable=False)
17

18 password_hash = Column(Text)
19

20 def set_password(self, pw):


21 pwhash = bcrypt.hashpw(pw.encode('utf8'), bcrypt.gensalt())
22 self.password_hash = pwhash.decode('utf8')
23

24 def check_password(self, pw):


25 if self.password_hash is not None:
26 expected_hash = self.password_hash.encode('utf8')
27 return bcrypt.checkpw(pw.encode('utf8'), expected_hash)
28 return False

This is a very basic model for a user who can authenticate with our wiki.

We discussed briefly in the previous chapter that our models will inherit from an SQLAlchemy
sqlalchemy.ext.declarative.declarative_base(). This will attach the model to our
schema.

As you can see, our User class has a class-level attribute __tablename__ which equals the string
users. Our User class will also have class-level attributes named id, name, password_hash, and
role (all instances of sqlalchemy.schema.Column). These will map to columns in the users
table. The id attribute will be the primary key in the table. The name attribute will be a text column, each
value of which needs to be unique within the column. The password_hash is a nullable text attribute
that will contain a securely hashed password. Finally, the role text attribute will hold the role of the user.

200 Contents
The Pyramid Web Framework, Version 1.9.4

There are two helper methods that will help us later when using the user objects. The first is
set_password which will take a raw password and transform it using bcrypt into an irreversible
representation, a process known as ”hashing”. The second method, check_password, will allow us to
compare the hashed value of the submitted password against the hashed value of the password stored in
the user’s record in the database. If the two hashed values match, then the submitted password is valid,
and we can authenticate the user.

We hash passwords so that it is impossible to decrypt them and use them to authenticate in the application.
If we stored passwords foolishly in clear text, then anyone with access to the database could retrieve any
password to authenticate as any user.

Add page.py

Create a new file tutorial/models/page.py with the following contents:

1 from sqlalchemy import (


2 Column,
3 ForeignKey,
4 Integer,
5 Text,
6 )
7 from sqlalchemy.orm import relationship
8

9 from .meta import Base


10

11

12 class Page(Base):
13 """ The SQLAlchemy declarative model class for a Page object. ""
,→"

14 __tablename__ = 'pages'
15 id = Column(Integer, primary_key=True)
16 name = Column(Text, nullable=False, unique=True)
17 data = Column(Text, nullable=False)
18

19 creator_id = Column(ForeignKey('users.id'), nullable=False)


20 creator = relationship('User', backref='created_pages')

As you can see, our Page class is very similar to the User defined above, except with attributes focused
on storing information about a wiki page, including id, name, and data. The only new construct in-
troduced here is the creator_id column, which is a foreign key referencing the users table. Foreign

0.2. Tutorials 201


The Pyramid Web Framework, Version 1.9.4

keys are very useful at the schema-level, but since we want to relate User objects with Page objects,
we also define a creator attribute as an ORM-level mapping between the two tables. SQLAlchemy
will automatically populate this value using the foreign key referencing the user. Since the foreign key
has nullable=False, we are guaranteed that an instance of page will have a corresponding page.
creator, which will be a User instance.

Edit models/__init__.py

Since we are using a package for our models, we also need to update our __init__.py file to ensure
that the models are attached to the metadata.

Open the tutorial/models/__init__.py file and edit it to look like the following:

1 from sqlalchemy import engine_from_config


2 from sqlalchemy.orm import sessionmaker
3 from sqlalchemy.orm import configure_mappers
4 import zope.sqlalchemy
5

6 # import or define all models here to ensure they are attached to␣
,→the

7 # Base.metadata prior to any initialization routines


8 from .page import Page # noqa
9 from .user import User # noqa
10

11 # run configure_mappers after defining all of the models to ensure


12 # all relationships can be setup
13 configure_mappers()
14

15

16 def get_engine(settings, prefix='sqlalchemy.'):


17 return engine_from_config(settings, prefix)
18

19

20 def get_session_factory(engine):
21 factory = sessionmaker()
22 factory.configure(bind=engine)
23 return factory
24

25

26 def get_tm_session(session_factory, transaction_manager):


27 """
(continues on next page)

202 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


28 Get a ``sqlalchemy.orm.Session`` instance backed by a␣
,→transaction.

29

30 This function will hook the session to the transaction manager␣


,→ which
31 will take care of committing any changes.
32

33 - When using pyramid_tm it will automatically be committed or␣


,→ aborted
34 depending on whether an exception is raised.
35

36 - When using scripts you should wrap the session in a manager␣


,→ yourself.
37 For example::
38

39 import transaction
40

41 engine = get_engine(settings)
42 session_factory = get_session_factory(engine)
43 with transaction.manager:
44 dbsession = get_tm_session(session_factory,␣
,→transaction.manager)

45

46 """
47 dbsession = session_factory()
48 zope.sqlalchemy.register(
49 dbsession, transaction_manager=transaction_manager)
50 return dbsession
51

52

53 def includeme(config):
54 """
55 Initialize the model for a Pyramid app.
56

57 Activate this setup using ``config.include('tutorial.models')``.


58

59 """
60 settings = config.get_settings()
61 settings['tm.manager_hook'] = 'pyramid_tm.explicit_manager'
62

63 # use pyramid_tm to hook the transaction lifecycle to the␣


,→ request
(continues on next page)

0.2. Tutorials 203


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


64 config.include('pyramid_tm')
65

66 # use pyramid_retry to retry a request when transient␣


exceptions occur
,→

67 config.include('pyramid_retry')
68

69 session_factory = get_session_factory(get_engine(settings))
70 config.registry['dbsession_factory'] = session_factory
71

72 # make request.dbsession available for use in Pyramid


73 config.add_request_method(
74 # r.tm is the transaction manager used by pyramid_tm
75 lambda r: get_tm_session(session_factory, r.tm),
76 'dbsession',
77 reify=True
78 )

Here we align our imports with the names of the models, Page and User.

Edit scripts/initializedb.py

We haven’t looked at the details of this file yet, but within the scripts directory of your tutorial
package is a file named initializedb.py. Code in this file is executed whenever we run the
initialize_tutorial_db command, as we did in the installation step of this tutorial.

The command is named initialize_tutorial_db because of the mapping defined in the


[console_scripts] entry point of our project’s setup.py file.

Since we’ve changed our model, we need to make changes to our initializedb.py script. In particu-
lar, we’ll replace our import of MyModel with those of User and Page. We’ll also change the very end
of the script to create two User objects (basic and editor) as well as a Page, rather than a MyModel,
and add them to our dbsession.

Open tutorial/scripts/initializedb.py and edit it to look like the following:

204 Contents
The Pyramid Web Framework, Version 1.9.4

1 import os
2 import sys
3 import transaction
4

5 from pyramid.paster import (


6 get_appsettings,
7 setup_logging,
8 )
9

10 from pyramid.scripts.common import parse_vars


11

12 from ..models.meta import Base


13 from ..models import (
14 get_engine,
15 get_session_factory,
16 get_tm_session,
17 )
18 from ..models import Page, User
19

20

21 def usage(argv):
22 cmd = os.path.basename(argv[0])
23 print('usage: %s <config_uri> [var=value]\n'
24 '(example: "%s development.ini")' % (cmd, cmd))
25 sys.exit(1)
26

27

28 def main(argv=sys.argv):
29 if len(argv) < 2:
30 usage(argv)
31 config_uri = argv[1]
32 options = parse_vars(argv[2:])
33 setup_logging(config_uri)
34 settings = get_appsettings(config_uri, options=options)
35

36 engine = get_engine(settings)
37 Base.metadata.create_all(engine)
38

39 session_factory = get_session_factory(engine)
40

41 with transaction.manager:
42 dbsession = get_tm_session(session_factory, transaction.
,→manager) (continues on next page)

0.2. Tutorials 205


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


43

44 editor = User(name='editor', role='editor')


45 editor.set_password('editor')
46 dbsession.add(editor)
47

48 basic = User(name='basic', role='basic')


49 basic.set_password('basic')
50 dbsession.add(basic)
51

52 page = Page(
53 name='FrontPage',
54 creator=editor,
55 data='This is the front page',
56 )
57 dbsession.add(page)

Only the highlighted lines need to be changed.

Installing the project and re-initializing the database

Because our model has changed, and in order to reinitialize the database, we need to rerun the
initialize_tutorial_db command to pick up the changes we’ve made to both the models.py file
and to the initializedb.py file. See Initializing the database for instructions.

Success will look something like this:

2016-12-20 02:51:11,195 INFO [sqlalchemy.engine.base.


,→Engine:1235][MainThread] SELECT CAST('test plain returns' AS␣

,→VARCHAR(60)) AS anon_1

2016-12-20 02:51:11,195 INFO [sqlalchemy.engine.base.


,→Engine:1236][MainThread] ()

2016-12-20 02:51:11,195 INFO [sqlalchemy.engine.base.


,→Engine:1235][MainThread] SELECT CAST('test unicode returns' AS␣

,→VARCHAR(60)) AS anon_1

2016-12-20 02:51:11,195 INFO [sqlalchemy.engine.base.


,→Engine:1236][MainThread] ()

2016-12-20 02:51:11,196 INFO [sqlalchemy.engine.base.


,→Engine:1140][MainThread] PRAGMA table_info("pages")

2016-12-20 02:51:11,196 INFO [sqlalchemy.engine.base.


,→Engine:1143][MainThread] ()

(continues on next page)

206 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


2016-12-20 02:51:11,196 INFO [sqlalchemy.engine.base.
,→Engine:1140][MainThread] PRAGMA table_info("users")

2016-12-20 02:51:11,197 INFO [sqlalchemy.engine.base.


,→Engine:1143][MainThread] ()

2016-12-20 02:51:11,197 INFO [sqlalchemy.engine.base.


,→Engine:1140][MainThread]

CREATE TABLE users (


id INTEGER NOT NULL,
name TEXT NOT NULL,
role TEXT NOT NULL,
password_hash TEXT,
CONSTRAINT pk_users PRIMARY KEY (id),
CONSTRAINT uq_users_name UNIQUE (name)
)

2016-12-20 02:51:11,197 INFO [sqlalchemy.engine.base.


,→Engine:1143][MainThread] ()

2016-12-20 02:51:11,198 INFO [sqlalchemy.engine.base.


,→Engine:719][MainThread] COMMIT

2016-12-20 02:51:11,199 INFO [sqlalchemy.engine.base.


,→Engine:1140][MainThread]

CREATE TABLE pages (


id INTEGER NOT NULL,
name TEXT NOT NULL,
data TEXT NOT NULL,
creator_id INTEGER NOT NULL,
CONSTRAINT pk_pages PRIMARY KEY (id),
CONSTRAINT uq_pages_name UNIQUE (name),
CONSTRAINT fk_pages_creator_id_users FOREIGN KEY(creator_
,→id) REFERENCES users (id)

2016-12-20 02:51:11,199 INFO [sqlalchemy.engine.base.


,→Engine:1143][MainThread] ()

2016-12-20 02:51:11,200 INFO [sqlalchemy.engine.base.


,→Engine:719][MainThread] COMMIT

2016-12-20 02:51:11,755 INFO [sqlalchemy.engine.base.


,→Engine:679][MainThread] BEGIN (implicit)

2016-12-20 02:51:11,755 INFO [sqlalchemy.engine.base.


,→Engine:1140][MainThread] INSERT INTO users (name, role, password_

,→hash) VALUES (?, ?, ?) (continues on next page)

0.2. Tutorials 207


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


2016-12-20 02:51:11,755 INFO [sqlalchemy.engine.base.
,→Engine:1143][MainThread] ('editor', 'editor', '$2b$12$ds7h2Zb7.

,→l6TEFup5h8f4ekA9GRfEpE1yQGDRvT9PConw73kKuupG')

2016-12-20 02:51:11,756 INFO [sqlalchemy.engine.base.


,→Engine:1140][MainThread] INSERT INTO users (name, role, password_

,→hash) VALUES (?, ?, ?)

2016-12-20 02:51:11,756 INFO [sqlalchemy.engine.base.


,→Engine:1143][MainThread] ('basic', 'basic', '$2b$12

,→$KgruXP5Vv7rikr6dGB3TF.flGXYpiE0Li9K583EVomjY.SYmQOsyi')

2016-12-20 02:51:11,757 INFO [sqlalchemy.engine.base.


,→Engine:1140][MainThread] INSERT INTO pages (name, data, creator_

,→id) VALUES (?, ?, ?)

2016-12-20 02:51:11,757 INFO [sqlalchemy.engine.base.


,→Engine:1143][MainThread] ('FrontPage', 'This is the front page',␣

,→1)

2016-12-20 02:51:11,757 INFO [sqlalchemy.engine.base.


,→Engine:719][MainThread] COMMIT

View the application in a browser

We can’t. At this point, our system is in a ”non-runnable” state; we’ll need to change view-related files in
the next chapter to be able to start the application successfully. If you try to start the application (see Start
the application), you’ll wind up with a Python traceback on your console that ends with this exception:

ImportError: cannot import name MyModel

This will also happen if you attempt to run the tests.

Defining Views

A view callable in a Pyramid application is typically a simple Python function that accepts a single pa-
rameter named request. A view callable is assumed to return a response object.

The request object has a dictionary as an attribute named matchdict. A matchdict maps the place-
holders in the matching URL pattern to the substrings of the path in the request URL. For instance, if a
call to pyramid.config.Configurator.add_route() has the pattern /{one}/{two}, and a
user visits http://example.com/foo/bar, our pattern would be matched against /foo/bar and
the matchdict would look like {'one':'foo', 'two':'bar'}.

208 Contents
The Pyramid Web Framework, Version 1.9.4

Adding the docutils dependency

Remember in the previous chapter we added a new dependency of the bcrypt package. Again, the view
code in our application will depend on a package which is not a dependency of the original ”tutorial”
application.

We need to add a dependency on the docutils package to our tutorial package’s setup.py file
by assigning this dependency to the requires parameter in the setup() function.

Open tutorial/setup.py and edit it to look like the following:

1 import os
2

3 from setuptools import setup, find_packages


4

5 here = os.path.abspath(os.path.dirname(__file__))
6 with open(os.path.join(here, 'README.txt')) as f:
7 README = f.read()
8 with open(os.path.join(here, 'CHANGES.txt')) as f:
9 CHANGES = f.read()
10

11 requires = [
12 'bcrypt',
13 'docutils',
14 'plaster_pastedeploy',
15 'pyramid >= 1.9a',
16 'pyramid_debugtoolbar',
17 'pyramid_jinja2',
18 'pyramid_retry',
19 'pyramid_tm',
20 'SQLAlchemy',
21 'transaction',
22 'zope.sqlalchemy',
23 'waitress',
24 ]
25

26 tests_require = [
27 'WebTest >= 1.3.1', # py3 compat
28 'pytest',
29 'pytest-cov',
30 ]
31

(continues on next page)

0.2. Tutorials 209


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


32 setup(
33 name='tutorial',
34 version='0.0',
35 description='myproj',
36 long_description=README + '\n\n' + CHANGES,
37 classifiers=[
38 'Programming Language :: Python',
39 'Framework :: Pyramid',
40 'Topic :: Internet :: WWW/HTTP',
41 'Topic :: Internet :: WWW/HTTP :: WSGI :: Application',
42 ],
43 author='',
44 author_email='',
45 url='',
46 keywords='web pyramid pylons',
47 packages=find_packages(),
48 include_package_data=True,
49 zip_safe=False,
50 extras_require={
51 'testing': tests_require,
52 },
53 install_requires=requires,
54 entry_points={
55 'paste.app_factory': [
56 'main = tutorial:main',
57 ],
58 'console_scripts': [
59 'initialize_tutorial_db = tutorial.scripts.
,→initializedb:main',

60 ],
61 },
62 )

Only the highlighted line needs to be added.


Again, as we did in the previous chapter, the dependency now needs to be installed, so re-run the $VENV/
bin/pip install -e . command.

Static assets

Our templates name static assets, including CSS and images. We don’t need to create these files within our
package’s static directory because they were provided at the time we created the project.

210 Contents
The Pyramid Web Framework, Version 1.9.4

As an example, the CSS file will be accessed via http://localhost:6543/static/theme.


css by virtue of the call to the add_static_view directive we’ve made in the routes.py
file. Any number and type of static assets can be placed in this directory (or subdirectories) and
are just referred to by URL or by using the convenience method static_url, e.g., request.
static_url('<package>:static/foo.css') within templates.

Adding routes to routes.py

This is the URL Dispatch tutorial, so let’s start by adding some URL patterns to our app. Later we’ll attach
views to handle the URLs.

The routes.py file contains pyramid.config.Configurator.add_route() calls which


serve to add routes to our application. First we’ll get rid of the existing route created by the template
using the name 'home'. It’s only an example and isn’t relevant to our application.

We then need to add four calls to add_route. Note that the ordering of these declarations is very
important. Route declarations are matched in the order they’re registered.

1. Add a declaration which maps the pattern / (signifying the root URL) to the route named
view_wiki. In the next step, we will map it to our view_wiki view callable by virtue of the
@view_config decorator attached to the view_wiki view function, which in turn will be indi-
cated by route_name='view_wiki'.

2. Add a declaration which maps the pattern /{pagename} to the route named view_page. This
is the regular view for a page. Again, in the next step, we will map it to our view_page view
callable by virtue of the @view_config decorator attached to the view_page view function,
whin in turn will be indicated by route_name='view_page'.

3. Add a declaration which maps the pattern /add_page/{pagename} to the route named
add_page. This is the add view for a new page. We will map it to our add_page view callable
by virtue of the @view_config decorator attached to the add_page view function, which in
turn will be indicated by route_name='add_page'.

4. Add a declaration which maps the pattern /{pagename}/edit_page to the route named
edit_page. This is the edit view for a page. We will map it to our edit_page view callable by
virtue of the @view_config decorator attached to the edit_page view function, which in turn
will be indicated by route_name='edit_page'.

As a result of our edits, the routes.py file should look like the following:

0.2. Tutorials 211


The Pyramid Web Framework, Version 1.9.4

1 def includeme(config):
2 config.add_static_view('static', 'static', cache_max_age=3600)
3 config.add_route('view_wiki', '/')
4 config.add_route('view_page', '/{pagename}')
5 config.add_route('add_page', '/add_page/{pagename}')
6 config.add_route('edit_page', '/{pagename}/edit_page')

The highlighted lines are the ones that need to be added or edited.

The order of the routes is important! If you placed /{pagename}/edit_page before /


add_page/{pagename}, then we would never be able to add pages. This is because the first route
would always match a request to /add_page/edit_page whereas we want /add_page/.. to
have priority. This isn’t a huge problem in this particular app because wiki pages are always camel
case, but it’s important to be aware of this behavior in your own apps.

Adding view functions in views/default.py

It’s time for a major change. Open tutorial/views/default.py and edit it to look like the fol-
lowing:

1 from pyramid.compat import escape


2 import re
3 from docutils.core import publish_parts
4

5 from pyramid.httpexceptions import (


6 HTTPFound,
7 HTTPNotFound,
8 )
9

10 from pyramid.view import view_config


11

12 from ..models import Page, User


13

14 # regular expression used to find WikiWords


15 wikiwords = re.compile(r"\b([A-Z]\w+[A-Z]+\w+)")
16

(continues on next page)

212 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


17 @view_config(route_name='view_wiki')
18 def view_wiki(request):
19 next_url = request.route_url('view_page', pagename='FrontPage')
20 return HTTPFound(location=next_url)
21

22 @view_config(route_name='view_page', renderer='../templates/view.
,→jinja2')

23 def view_page(request):
24 pagename = request.matchdict['pagename']
25 page = request.dbsession.query(Page).filter_by(name=pagename).
,→first()

26 if page is None:
27 raise HTTPNotFound('No such page')
28

29 def add_link(match):
30 word = match.group(1)
31 exists = request.dbsession.query(Page).filter_by(name=word).
,→all()

32 if exists:
33 view_url = request.route_url('view_page', pagename=word)
34 return '<a href="%s">%s</a>' % (view_url, escape(word))
35 else:
36 add_url = request.route_url('add_page', pagename=word)
37 return '<a href="%s">%s</a>' % (add_url, escape(word))
38

39 content = publish_parts(page.data, writer_name='html')['html_


,→ body']
40 content = wikiwords.sub(add_link, content)
41 edit_url = request.route_url('edit_page', pagename=page.name)
42 return dict(page=page, content=content, edit_url=edit_url)
43

44 @view_config(route_name='edit_page', renderer='../templates/edit.
,→jinja2')

45 def edit_page(request):
46 pagename = request.matchdict['pagename']
47 page = request.dbsession.query(Page).filter_by(name=pagename).
,→one()

48 if 'form.submitted' in request.params:
49 page.data = request.params['body']
50 next_url = request.route_url('view_page', pagename=page.
,→name)

(continues on next page)

0.2. Tutorials 213


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


51 return HTTPFound(location=next_url)
52 return dict(
53 pagename=page.name,
54 pagedata=page.data,
55 save_url=request.route_url('edit_page', pagename=page.name),
56 )
57

58 @view_config(route_name='add_page', renderer='../templates/edit.
,→jinja2')

59 def add_page(request):
60 pagename = request.matchdict['pagename']
61 if request.dbsession.query(Page).filter_by(name=pagename).
,→count() > 0:

62 next_url = request.route_url('edit_page', pagename=pagename)


63 return HTTPFound(location=next_url)
64 if 'form.submitted' in request.params:
65 body = request.params['body']
66 page = Page(name=pagename, data=body)
67 page.creator = (
68 request.dbsession.query(User).filter_by(name='editor').
,→one())

69 request.dbsession.add(page)
70 next_url = request.route_url('view_page', pagename=pagename)
71 return HTTPFound(location=next_url)
72 save_url = request.route_url('add_page', pagename=pagename)
73 return dict(pagename=pagename, pagedata='', save_url=save_url)

The highlighted lines need to be added or edited.

We added some imports, and created a regular expression to find ”WikiWords”.

We got rid of the my_view view function and its decorator that was added when we originally rendered
the alchemy cookiecutter. It was only an example and isn’t relevant to our application. We also deleted
the db_err_msg string.

Then we added four view callable functions to our views/default.py module, as mentioned in the
previous step:

• view_wiki() - Displays the wiki itself. It will answer on the root URL.

• view_page() - Displays an individual page.

214 Contents
The Pyramid Web Framework, Version 1.9.4

• edit_page() - Allows the user to edit a page.

• add_page() - Allows the user to add a page.

We’ll describe each one briefly in the following sections.

There is nothing special about the filename default.py exept that it is a Python module. A
project may have many view callables throughout its codebase in arbitrarily named modules. Modules
implementing view callables often have view in their name (or may live in a Python subpackage of your
application package named views, as in our case), but this is only by convention, not a requirement.

The view_wiki view function

Following is the code for the view_wiki view function and its decorator:

17 @view_config(route_name='view_wiki')
18 def view_wiki(request):
19 next_url = request.route_url('view_page', pagename='FrontPage')
20 return HTTPFound(location=next_url)

view_wiki() is the default view that gets called when a request is made to the root URL of our wiki.
It always redirects to a URL which represents the path to our ”FrontPage”.

The view_wiki view callable always redirects to the URL of a Page resource named ”FrontPage”. To
do so, it returns an instance of the pyramid.httpexceptions.HTTPFound class (instances of
which implement the pyramid.interfaces.IResponse interface, like pyramid.response.
Response). It uses the pyramid.request.Request.route_url() API to construct a URL to
the FrontPage page (i.e., http://localhost:6543/FrontPage), and uses it as the ”location”
of the HTTPFound response, forming an HTTP redirect.

The view_page view function

Here is the code for the view_page view function and its decorator:

0.2. Tutorials 215


The Pyramid Web Framework, Version 1.9.4

22 @view_config(route_name='view_page', renderer='../templates/view.
,→jinja2')

23 def view_page(request):
24 pagename = request.matchdict['pagename']
25 page = request.dbsession.query(Page).filter_by(name=pagename).
,→first()

26 if page is None:
27 raise HTTPNotFound('No such page')
28

29 def add_link(match):
30 word = match.group(1)
31 exists = request.dbsession.query(Page).filter_by(name=word).
,→all()

32 if exists:
33 view_url = request.route_url('view_page', pagename=word)
34 return '<a href="%s">%s</a>' % (view_url, escape(word))
35 else:
36 add_url = request.route_url('add_page', pagename=word)
37 return '<a href="%s">%s</a>' % (add_url, escape(word))
38

39 content = publish_parts(page.data, writer_name='html')['html_


,→body']
40 content = wikiwords.sub(add_link, content)
41 edit_url = request.route_url('edit_page', pagename=page.name)
42 return dict(page=page, content=content, edit_url=edit_url)

view_page() is used to display a single page of our wiki. It renders the reStructuredText body of a page
(stored as the data attribute of a Page model object) as HTML. Then it substitutes an HTML anchor for
each WikiWord reference in the rendered HTML using a compiled regular expression.

The curried function named add_link is used as the first argument to wikiwords.sub, indicating
that it should be called to provide a value for each WikiWord match found in the content. If the wiki already
contains a page with the matched WikiWord name, add_link() generates a view link to be used as the
substitution value and returns it. If the wiki does not already contain a page with the matched WikiWord
name, add_link() generates an ”add” link as the substitution value and returns it.

As a result, the content variable is now a fully formed bit of HTML containing various view and add
links for WikiWords based on the content of our current page object.

We then generate an edit URL, because it’s easier to do here than in the template, and we return a dictionary
with a number of arguments. The fact that view_page() returns a dictionary (as opposed to a response
object) is a cue to Pyramid that it should try to use a renderer associated with the view configuration to

216 Contents
The Pyramid Web Framework, Version 1.9.4

render a response. In our case, the renderer used will be the view.jinja2 template, as indicated in the
@view_config decorator that is applied to view_page().

If the page does not exist, then we need to handle that by raising a pyramid.httpexceptions.
HTTPNotFound to trigger our 404 handling, defined in tutorial/views/notfound.py.

Using raise versus return with the HTTP exceptions is an important distinction that can com-
monly mess people up. In tutorial/views/notfound.py there is an exception view registered for
handling the HTTPNotFound exception. Exception views are only triggered for raised exceptions. If the
HTTPNotFound is returned, then it has an internal ”stock” template that it will use to render itself as a
response. If you aren’t seeing your exception view being executed, this is most likely the problem! See
Using Special Exceptions in View Callables for more information about exception views.

The edit_page view function

Here is the code for the edit_page view function and its decorator:

44 @view_config(route_name='edit_page', renderer='../templates/edit.
,→jinja2')

45 def edit_page(request):
46 pagename = request.matchdict['pagename']
47 page = request.dbsession.query(Page).filter_by(name=pagename).
,→one()

48 if 'form.submitted' in request.params:
49 page.data = request.params['body']
50 next_url = request.route_url('view_page', pagename=page.
,→name)

51 return HTTPFound(location=next_url)
52 return dict(
53 pagename=page.name,
54 pagedata=page.data,
55 save_url=request.route_url('edit_page', pagename=page.name),
56 )

edit_page() is invoked when a user clicks the ”Edit this Page” button on the view form. It renders an
edit form, but it also acts as the handler for the form which it renders. The matchdict attribute of the
request passed to the edit_page view will have a 'pagename' key matching the name of the page
that the user wants to edit.

0.2. Tutorials 217


The Pyramid Web Framework, Version 1.9.4

If the view execution is a result of a form submission (i.e., the expression 'form.submitted' in
request.params is True), the view grabs the body element of the request parameters and sets it as
the data attribute of the page object. It then redirects to the view_page view of the wiki page.

If the view execution is not a result of a form submission (i.e., the expression 'form.submitted'
in request.params is False), the view simply renders the edit form, passing the page object and a
save_url which will be used as the action of the generated form.

Since our request.dbsession defined in the previous chapter is registered with the
pyramid_tm transaction manager, any changes we make to objects managed by the that session will be
committed automatically. In the event that there was an error (even later, in our template code), the changes
would be aborted. This means the view itself does not need to concern itself with commit/rollback logic.

The add_page view function

Here is the code for the add_page view function and its decorator:

58 @view_config(route_name='add_page', renderer='../templates/edit.
,→jinja2')

59 def add_page(request):
60 pagename = request.matchdict['pagename']
61 if request.dbsession.query(Page).filter_by(name=pagename).
,→count() > 0:

62 next_url = request.route_url('edit_page', pagename=pagename)


63 return HTTPFound(location=next_url)
64 if 'form.submitted' in request.params:
65 body = request.params['body']
66 page = Page(name=pagename, data=body)
67 page.creator = (
68 request.dbsession.query(User).filter_by(name='editor').
,→one())

69 request.dbsession.add(page)
70 next_url = request.route_url('view_page', pagename=pagename)
71 return HTTPFound(location=next_url)
72 save_url = request.route_url('add_page', pagename=pagename)
73 return dict(pagename=pagename, pagedata='', save_url=save_url)

218 Contents
The Pyramid Web Framework, Version 1.9.4

add_page() is invoked when a user clicks on a WikiWord which isn’t yet represented as a page in the sys-
tem. The add_link function within the view_page view generates URLs to this view. add_page()
also acts as a handler for the form that is generated when we want to add a page object. The matchdict
attribute of the request passed to the add_page() view will have the values we need to construct URLs
and find model objects.

The matchdict will have a 'pagename' key that matches the name of the page we’d like to add. If
our add view is invoked via, for example, http://localhost:6543/add_page/SomeName, the
value for 'pagename' in the matchdict will be 'SomeName'.

Next a check is performed to determine whether the Page already exists in the database. If it already
exists, then the client is redirected to the edit_page view, else we continue to the next check.

If the view execution is a result of a form submission (i.e., the expression 'form.submitted' in
request.params is True), we grab the page body from the form data, create a Page object with this
page body and the name taken from matchdict['pagename'], and save it into the database using
request.dbession.add. Since we have not yet covered authentication, we don’t have a logged-in
user to add as the page’s creator. Until we get to that point in the tutorial, we’ll just assume that all
pages are created by the editor user. Thus we query for that object, and set it on page.creator.
Finally, we redirect the client back to the view_page view for the newly created page.

If the view execution is not a result of a form submission (i.e., the expression 'form.submitted' in
request.params is False), the view callable renders a template. To do so, it generates a save_url
which the template uses as the form post URL during rendering. We’re lazy here, so we’re going to use the
same template (templates/edit.jinja2) for the add view as well as the page edit view. To do so
we create a dummy Page object in order to satisfy the edit form’s desire to have some page object exposed
as page. Pyramid will render the template associated with this view to a response.

Adding templates

The view_page, add_page and edit_page views that we’ve added reference a template. Each
template is a Jinja2 template. These templates will live in the templates directory of our tutorial
package. Jinja2 templates must have a .jinja2 extension to be recognized as such.

The layout.jinja2 template

Update tutorial/templates/layout.jinja2 with the following content, as indicated by the


emphasized lines:

0.2. Tutorials 219


The Pyramid Web Framework, Version 1.9.4

1 <!DOCTYPE html>
2 <html lang="{{request.locale_name}}">
3 <head>
4 <meta charset="utf-8">
5 <meta http-equiv="X-UA-Compatible" content="IE=edge">
6 <meta name="viewport" content="width=device-width, initial-
,→scale=1.0">

7 <meta name="description" content="pyramid web application">


8 <meta name="author" content="Pylons Project">
9 <link rel="shortcut icon" href="{{request.static_url(
,→'tutorial:static/pyramid-16x16.png')}}">

10

11 <title>{% block subtitle %}{% endblock %}Pyramid tutorial wiki␣


,→(based on TurboGears 20-Minute Wiki)</title>
12

13 <!-- Bootstrap core CSS -->


14 <link href="//oss.maxcdn.com/libs/twitter-bootstrap/3.0.3/css/
,→bootstrap.min.css" rel="stylesheet">

15

16 <!-- Custom styles for this scaffold -->


17 <link href="{{request.static_url('tutorial:static/theme.css')}}
,→" rel="stylesheet">

18

19 <!-- HTML5 shim and Respond.js IE8 support of HTML5 elements␣


,→and media queries -->
20 <!--[if lt IE 9]>
21 <script src="//oss.maxcdn.com/libs/html5shiv/3.7.0/html5shiv.
,→js" integrity="sha384-
,→0s5Pv64cNZJieYFkXYOTId2HMA2Lfb6q2nAcx2n0RTLUnCAoTTsS0nKEO27XyKcY"␣

,→crossorigin="anonymous"></script>

22 <script src="//oss.maxcdn.com/libs/respond.js/1.3.0/respond.
,→min.js" integrity="sha384-f1r2UzjsxZ9T4V1f2zBO/
,→evUqSEOpeaUUZcMTz1Up63bl4ruYnFYeM+BxI4NhyI0" crossorigin=

,→"anonymous"></script>

23 <![endif]-->
24 </head>
25

26 <body>
27

28 <div class="starter-template">
29 <div class="container">
30 <div class="row">
31 <div class="col-md-2">
(continues on next page)

220 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


32 <img class="logo img-responsive" src="{{request.static_
,→url('tutorial:static/pyramid.png') }}" alt="pyramid web framework

,→">

33 </div>
34 <div class="col-md-10">
35 <div class="content">
36 {% block content %}{% endblock %}
37 </div>
38 </div>
39 </div>
40 <div class="row">
41 <div class="copyright">
42 Copyright &copy; Pylons Project
43 </div>
44 </div>
45 </div>
46 </div>
47

48

49 <!-- Bootstrap core JavaScript


50 ================================================== -->
51 <!-- Placed at the end of the document so the pages load faster␣
,→-->

52 <script src="//oss.maxcdn.com/libs/jquery/1.10.2/jquery.min.js"␣
,→integrity="sha384-
,→aBL3Lzi6c9LNDGvpHkZrrm3ZVsIwohDD7CDozL0pk8FwCrfmV7H9w8j3L7ikEv6h"␣

,→crossorigin="anonymous"></script>

53 <script src="//oss.maxcdn.com/libs/twitter-bootstrap/3.0.3/js/
,→bootstrap.min.js" integrity="sha384-s1ITto93iSMDxlp/
,→79qhWHi+LsIi9Gx6yL+cOKDuymvihkfol83TYbLbOw+W/wv4" crossorigin=

,→"anonymous"></script>

54 </body>
55 </html>

Since we’re using a templating engine, we can factor common boilerplate out of our page templates into
reusable components. One method for doing this is template inheritance via blocks.

• We have defined two placeholders in the layout template where a child template can override the
content. These blocks are named subtitle (line 11) and content (line 36).

• Please refer to the Jinja2 documentation for more information about template inheritance.

0.2. Tutorials 221


The Pyramid Web Framework, Version 1.9.4

The view.jinja2 template

Create tutorial/templates/view.jinja2 and add the following content:

1 {% extends 'layout.jinja2' %}
2

3 {% block subtitle %}{{page.name}} - {% endblock subtitle %}


4

5 {% block content %}
6 <p>{{ content|safe }}</p>
7 <p>
8 <a href="{{ edit_url }}">
9 Edit this page
10 </a>
11 </p>
12 <p>
13 Viewing <strong>{{page.name}}</strong>, created by <strong>{
,→{page.creator.name}}</strong>.

14 </p>
15 <p>You can return to the
16 <a href="{{request.route_url('view_page', pagename='FrontPage')}}">
,→FrontPage</a>.

17 </p>
18 {% endblock content %}

This template is used by view_page() for displaying a single wiki page.

• We begin by extending the layout.jinja2 template defined above, which provides the skeleton
of the page (line 1).

• We override the subtitle block from the base layout, inserting the page name into the page’s title
(line 3).

• We override the content block from the base layout to insert our markup into the body (lines
5-18).

• We use a variable that is replaced with the content value provided by the view (line 6). content
contains HTML, so the |safe filter is used to prevent escaping it (e.g., changing ”>” to ”&gt;”).

• We create a link that points at the ”edit” URL, which when clicked invokes the edit_page view
for the requested page (lines 8-10).

222 Contents
The Pyramid Web Framework, Version 1.9.4

The edit.jinja2 template

Create tutorial/templates/edit.jinja2 and add the following content:

1 {% extends 'layout.jinja2' %}
2

3 {% block subtitle %}Edit {{pagename}} - {% endblock subtitle %}


4

5 {% block content %}
6 <p>
7 Editing <strong>{{pagename}}</strong>
8 </p>
9 <p>You can return to the
10 <a href="{{request.route_url('view_page', pagename='FrontPage')}}">
,→FrontPage</a>.

11 </p>
12 <form action="{{ save_url }}" method="post">
13 <div class="form-group">
14 <textarea class="form-control" name="body" rows="10" cols="60">{
,→{ pagedata }}</textarea>

15 </div>
16 <div class="form-group">
17 <button type="submit" name="form.submitted" value="Save" class=
,→"btn btn-default">Save</button>

18 </div>
19 </form>
20 {% endblock content %}

This template serves two use cases. It is used by add_page() and edit_page() for adding and
editing a wiki page. It displays a page containing a form and which provides the following:

• Again, we extend the layout.jinja2 template, which provides the skeleton of the page (line 1).

• Override the subtitle block to affect the <title> tag in the head of the page (line 3).

• A 10-row by 60-column textarea field named body that is filled with any existing page data
when it is rendered (line 14).

• A submit button that has the name form.submitted (line 17).

• The form POSTs back to the save_url argument supplied by the view (line 12). The view will
use the body and form.submitted values.

0.2. Tutorials 223


The Pyramid Web Framework, Version 1.9.4

The 404.jinja2 template

Replace tutorial/templates/404.jinja2 with the following content:

1 {% extends "layout.jinja2" %}
2

3 {% block content %}
4 <div class="content">
5 <h1><span class="font-semi-bold">Pyramid tutorial wiki</span>
,→<span class="smaller">(based on TurboGears 20-Minute Wiki)</span>

,→</h1>

6 <p class="lead"><span class="font-semi-bold">404</span> Page Not␣


,→Found</p>

7 </div>
8 {% endblock content %}

This template is linked from the notfound_view defined in tutorial/views/notfound.py as


shown here:

1 from pyramid.view import notfound_view_config


2

4 @notfound_view_config(renderer='../templates/404.jinja2')
5 def notfound_view(request):
6 request.response.status = 404
7 return {}

There are several important things to note about this configuration:

• The notfound_view in the above snippet is called an exception view. For more information see
Using Special Exceptions in View Callables.

• The notfound_view sets the response status to 404. It’s possible to affect the response object
used by the renderer via Varying Attributes of Rendered Responses.

• The notfound_view is registered as an exception view and will be invoked only if pyramid.
httpexceptions.HTTPNotFound is raised as an exception. This means it will not be invoked
for any responses returned from a view normally. For example, on line 27 of tutorial/views/
default.py the exception is raised which will trigger the view.

224 Contents
The Pyramid Web Framework, Version 1.9.4

Finally, we may delete the tutorial/templates/mytemplate.jinja2 template that was pro-


vided by the alchemy cookiecutter, as we have created our own templates for the wiki.

Our templates use a request object that none of our tutorial views return in their dictionary.
request is one of several names that are available ”by default” in a template when a template renderer
is used. See System Values Used During Rendering for information about other names that are available
by default when a template is used as a renderer.

Viewing the application in a browser

We can finally examine our application in a browser (See Start the application). Launch a browser and
visit each of the following URLs, checking that the result is as expected:

• http://localhost:6543/ invokes the view_wiki view. This always redirects to the view_page
view of the FrontPage page object.

• http://localhost:6543/FrontPage invokes the view_page view of the FrontPage page object.

• http://localhost:6543/FrontPage/edit_page invokes the edit_page view for the FrontPage page


object.

• http://localhost:6543/add_page/SomePageName invokes the add_page view for a page. If the


page already exists, then it redirects the user to the edit_page view for the page object.

• http://localhost:6543/SomePageName/edit_page invokes the edit_page view for an existing


page, or generates an error if the page does not exist.

• To generate an error, visit http://localhost:6543/foobars/edit_page which will generate a


NoResultFound: No row was found for one() error. You’ll see an interactive trace-
back facility provided by pyramid_debugtoolbar.

0.2. Tutorials 225


The Pyramid Web Framework, Version 1.9.4

Adding authentication

Pyramid provides facilities for authentication and authorization. In this section we’ll focus solely on the
authentication APIs to add login and logout functionality to our wiki.

We will implement authentication with the following steps:

• Add an authentication policy and a request.user computed property (security.py).

• Add routes for /login and /logout (routes.py).

• Add login and logout views (views/auth.py).

• Add a login template (login.jinja2).

• Add ”Login” and ”Logout” links to every page based on the user’s authenticated state (layout.
jinja2).

• Make the existing views verify user state (views/default.py).

• Redirect to /login when a user is denied access to any of the views that require permission, instead
of a default ”403 Forbidden” page (views/auth.py).

Authenticating requests

The core of Pyramid authentication is an authentication policy which is used to identify authentication
information from a request, as well as handling the low-level login and logout operations required to
track users across requests (via cookies, headers, or whatever else you can imagine).

Add the authentication policy

Create a new file tutorial/security.py with the following content:

226 Contents
The Pyramid Web Framework, Version 1.9.4

1 from pyramid.authentication import AuthTktAuthenticationPolicy


2 from pyramid.authorization import ACLAuthorizationPolicy
3

4 from .models import User


5

7 class MyAuthenticationPolicy(AuthTktAuthenticationPolicy):
8 def authenticated_userid(self, request):
9 user = request.user
10 if user is not None:
11 return user.id
12

13 def get_user(request):
14 user_id = request.unauthenticated_userid
15 if user_id is not None:
16 user = request.dbsession.query(User).get(user_id)
17 return user
18

19 def includeme(config):
20 settings = config.get_settings()
21 authn_policy = MyAuthenticationPolicy(
22 settings['auth.secret'],
23 hashalg='sha512',
24 )
25 config.set_authentication_policy(authn_policy)
26 config.set_authorization_policy(ACLAuthorizationPolicy())
27 config.add_request_method(get_user, 'user', reify=True)

Here we’ve defined:

• A new authentication policy named MyAuthenticationPolicy, which is subclassed


from Pyramid’s pyramid.authentication.AuthTktAuthenticationPolicy, which
tracks the userid using a signed cookie (lines 7-11).

• A get_user function, which can convert the unauthenticated_userid from the policy
into a User object from our database (lines 13-17).

• The get_user is registered on the request as request.user to be used throughout our appli-
cation as the authenticated User object for the logged-in user (line 27).

The logic in this file is a little bit interesting, so we’ll go into detail about what’s happening here:

0.2. Tutorials 227


The Pyramid Web Framework, Version 1.9.4

First, the default authentication policies all provide a method named unauthenticated_userid
which is responsible for the low-level parsing of the information in the request (cookies, headers, etc.). If
a userid is found, then it is returned from this method. This is named unauthenticated_userid
because, at the lowest level, it knows the value of the userid in the cookie, but it doesn’t know if it’s actually
a user in our system (remember, anything the user sends to our app is untrusted).

Second, our application should only care about authenticated_userid and request.user,
which have gone through our application-specific process of validating that the user is logged in.

In order to provide an authenticated_userid we need a verification step. That can happen any-
where, so we’ve elected to do it inside of the cached request.user computed property. This is a
convenience that makes request.user the source of truth in our system. It is either None or a User
object from our database. This is why the get_user function uses the unauthenticated_userid
to check the database.

Configure the app

Since we’ve added a new tutorial/security.py module, we need to include it. Open the file
tutorial/__init__.py and edit the following lines:

1 from pyramid.config import Configurator


2

4 def main(global_config, **settings):


5 """ This function returns a Pyramid WSGI application.
6 """
7 config = Configurator(settings=settings)
8 config.include('pyramid_jinja2')
9 config.include('.models')
10 config.include('.routes')
11 config.include('.security')
12 config.scan()
13 return config.make_wsgi_app()

Our authentication policy is expecting a new setting, auth.secret. Open the file development.ini
and add the highlighted line below:

19 retry.attempts = 3
20

21 auth.secret = seekrit

228 Contents
The Pyramid Web Framework, Version 1.9.4

Finally, best practices tell us to use a different secret for production, so open production.ini and add
a different secret:

17 retry.attempts = 3
18

19 auth.secret = real-seekrit

Add permission checks

Pyramid has full support for declarative authorization, which we’ll cover in the next chapter. However,
many people looking to get their feet wet are just interested in authentication with some basic form of
home-grown authorization. We’ll show below how to accomplish the simple security goals of our wiki,
now that we can track the logged-in state of users.

Remember our goals:

• Allow only editor and basic logged-in users to create new pages.

• Only allow editor users and the page creator (possibly a basic user) to edit pages.

Open the file tutorial/views/default.py and fix the following imports:

5 from pyramid.httpexceptions import (


6 HTTPForbidden,
7 HTTPFound,
8 HTTPNotFound,
9 )
10

11 from pyramid.view import view_config


12

13 from ..models import Page

Change the two highlighted lines.

In the same file, now edit the edit_page view function:

0.2. Tutorials 229


The Pyramid Web Framework, Version 1.9.4

45 @view_config(route_name='edit_page', renderer='../templates/edit.
,→jinja2')

46 def edit_page(request):
47 pagename = request.matchdict['pagename']
48 page = request.dbsession.query(Page).filter_by(name=pagename).
,→one()

49 user = request.user
50 if user is None or (user.role != 'editor' and page.creator !=␣
,→user):

51 raise HTTPForbidden
52 if 'form.submitted' in request.params:
53 page.data = request.params['body']
54 next_url = request.route_url('view_page', pagename=page.
,→name)

55 return HTTPFound(location=next_url)
56 return dict(
57 pagename=page.name,
58 pagedata=page.data,
59 save_url=request.route_url('edit_page', pagename=page.name),
60 )

Only the highlighted lines need to be changed.

If the user either is not logged in or the user is not the page’s creator and not an editor, then we raise
HTTPForbidden.

In the same file, now edit the add_page view function:

62 @view_config(route_name='add_page', renderer='../templates/edit.
,→jinja2')

63 def add_page(request):
64 user = request.user
65 if user is None or user.role not in ('editor', 'basic'):
66 raise HTTPForbidden
67 pagename = request.matchdict['pagename']
68 if request.dbsession.query(Page).filter_by(name=pagename).
,→count() > 0:

69 next_url = request.route_url('edit_page', pagename=pagename)


70 return HTTPFound(location=next_url)
71 if 'form.submitted' in request.params:
72 body = request.params['body']
(continues on next page)

230 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


73 page = Page(name=pagename, data=body)
74 page.creator = request.user
75 request.dbsession.add(page)
76 next_url = request.route_url('view_page', pagename=pagename)

Only the highlighted lines need to be changed.

If the user either is not logged in or is not in the basic or editor roles, then we raise HTTPForbidden,
which will return a ”403 Forbidden” response to the user. However, we will hook this later to redirect to
the login page. Also, now that we have request.user, we no longer have to hard-code the creator as
the editor user, so we can finally drop that hack.

These simple checks should protect our views.

Login, logout

Now that we’ve got the ability to detect logged-in users, we need to add the /login and /logout views
so that they can actually login and logout!

Add routes for /login and /logout

Go back to tutorial/routes.py and add these two routes as highlighted:

3 config.add_route('view_wiki', '/')
4 config.add_route('login', '/login')
5 config.add_route('logout', '/logout')
6 config.add_route('view_page', '/{pagename}')

The preceding lines must be added before the following view_page route definition:

6 config.add_route('view_page', '/{pagename}')

This is because view_page’s route definition uses a catch-all ”replacement marker” /{pagename}
(see Route Pattern Syntax), which will catch any route that was not already caught by any route registered
before it. Hence, for login and logout views to have the opportunity of being matched (or ”caught”),
they must be above /{pagename}.

0.2. Tutorials 231


The Pyramid Web Framework, Version 1.9.4

Add login, logout, and forbidden views

Create a new file tutorial/views/auth.py, and add the following code to it:

1 from pyramid.httpexceptions import HTTPFound


2 from pyramid.security import (
3 remember,
4 forget,
5 )
6 from pyramid.view import (
7 forbidden_view_config,
8 view_config,
9 )
10

11 from ..models import User


12

13

14 @view_config(route_name='login', renderer='../templates/login.jinja2
,→')

15 def login(request):
16 next_url = request.params.get('next', request.referrer)
17 if not next_url:
18 next_url = request.route_url('view_wiki')
19 message = ''
20 login = ''
21 if 'form.submitted' in request.params:
22 login = request.params['login']
23 password = request.params['password']
24 user = request.dbsession.query(User).filter_by(name=login).
,→first()

25 if user is not None and user.check_password(password):


26 headers = remember(request, user.id)
27 return HTTPFound(location=next_url, headers=headers)
28 message = 'Failed login'
29

30 return dict(
31 message=message,
32 url=request.route_url('login'),
33 next_url=next_url,
34 login=login,
35 )
36

(continues on next page)

232 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


37 @view_config(route_name='logout')
38 def logout(request):
39 headers = forget(request)
40 next_url = request.route_url('view_wiki')
41 return HTTPFound(location=next_url, headers=headers)
42

43 @forbidden_view_config()
44 def forbidden_view(request):
45 next_url = request.route_url('login', _query={'next': request.
,→url})

46 return HTTPFound(location=next_url)

This code adds three new views to the application:

• The login view renders a login form and processes the post from the login form, checking creden-
tials against our users table in the database.

The check is done by first finding a User record in the database, then using our user.
check_password method to compare the hashed passwords.

If the credentials are valid, then we use our authentication policy to store the user’s id in the response
using pyramid.security.remember().

Finally, the user is redirected back to either the page which they were trying to access (next) or the
front page as a fallback. This parameter is used by our forbidden view, as explained below, to finish
the login workflow.

• The logout view handles requests to /logout by clearing the credentials using pyramid.
security.forget(), then redirecting them to the front page.

• The forbidden_view is registered using the pyramid.view.forbidden_view_config


decorator. This is a special exception view, which is invoked when a pyramid.
httpexceptions.HTTPForbidden exception is raised.

This view will handle a forbidden error by redirecting the user to /login. As a convenience, it also
sets the next= query string to the current URL (the one that is forbidding access). This way, if the
user successfully logs in, they will be sent back to the page which they had been trying to access.

Add the login.jinja2 template

Create tutorial/templates/login.jinja2 with the following content:

0.2. Tutorials 233


The Pyramid Web Framework, Version 1.9.4

{% extends 'layout.jinja2' %}

{% block title %}Login - {% endblock title %}

{% block content %}
<p>
<strong>
Login
</strong><br>
{{ message }}
</p>
<form action="{{ url }}" method="post">
<input type="hidden" name="next" value="{{ next_url }}">
<div class="form-group">
<label for="login">Username</label>
<input type="text" name="login" value="{{ login }}">
</div>
<div class="form-group">
<label for="password">Password</label>
<input type="password" name="password">
</div>
<div class="form-group">
<button type="submit" name="form.submitted" value="Log In"␣
,→class="btn btn-default">Log In</button>

</div>
</form>
{% endblock content %}

The above template is referenced in the login view that we just added in tutorial/views/auth.py.

Add ”Login” and ”Logout” links

Open tutorial/templates/layout.jinja2 and add the following code as indicated by the high-
lighted lines.

35 <div class="content">
36 {% if request.user is none %}
37 <p class="pull-right">
38 <a href="{{ request.route_url('login') }}">Login</a>
(continues on next page)

234 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


39 </p>
40 {% else %}
41 <p class="pull-right">
42 {{request.user.name}} <a href="{{request.route_url(
,→'logout')}}">Logout</a>

43 </p>
44 {% endif %}
45 {% block content %}{% endblock %}
46 </div>

The request.user will be None if the user is not authenticated, or a tutorial.models.User


object if the user is authenticated. This check will make the logout link shown only when the user is logged
in, and conversely the login link is only shown when the user is logged out.

Viewing the application in a browser

We can finally examine our application in a browser (See Start the application). Launch a browser and
visit each of the following URLs, checking that the result is as expected:

• http://localhost:6543/ invokes the view_wiki view. This always redirects to the view_page
view of the FrontPage page object. It is executable by any user.

• http://localhost:6543/FrontPage invokes the view_page view of the FrontPage page object.


There is a ”Login” link in the upper right corner while the user is not authenticated, else it is a
”Logout” link when the user is authenticated.

• http://localhost:6543/FrontPage/edit_page invokes the edit_page view for the FrontPage page


object. It is executable by only the editor user. If a different user (or the anonymous user) invokes
it, then a login form will be displayed. Supplying the credentials with the username editor and
password editor will display the edit page form.

• http://localhost:6543/add_page/SomePageName invokes the add_page view for a page. If the


page already exists, then it redirects the user to the edit_page view for the page object. It is
executable by either the editor or basic user. If a different user (or the anonymous user) invokes
it, then a login form will be displayed. Supplying the credentials with either the username editor
and password editor, or username basic and password basic, will display the edit page form.

• http://localhost:6543/SomePageName/edit_page invokes the edit_page view for an existing


page, or generates an error if the page does not exist. It is editable by the basic user if the page
was created by that user in the previous step. If, instead, the page was created by the editor user,
then the login page should be shown for the basic user.

0.2. Tutorials 235


The Pyramid Web Framework, Version 1.9.4

• After logging in (as a result of hitting an edit or add page and submitting the login form with the
editor credentials), we’ll see a ”Logout” link in the upper right hand corner. When we click it,
we’re logged out, redirected back to the front page, and a ”Login” link is shown in the upper right
hand corner.

Adding authorization

In the last chapter we built authentication into our wiki. We also went one step further and used the
request.user object to perform some explicit authorization checks. This is fine for a lot of applica-
tions, but Pyramid provides some facilities for cleaning this up and decoupling the constraints from the
view function itself.

We will implement access control with the following steps:

• Update the authentication policy to break down the userid into a list of principals (security.py).

• Define an authorization policy for mapping users, resources and permissions (security.py).

• Add new resource definitions that will be used as the context for the wiki pages (routes.py).

• Add an ACL to each resource (routes.py).

• Replace the inline checks on the views with permission declarations (views/default.py).

Add user principals

A principal is a level of abstraction on top of the raw userid that describes the user in terms of its capabil-
ities, roles, or other identifiers that are easier to generalize. The permissions are then written against the
principals without focusing on the exact user involved.

Pyramid defines two builtin principals used in every application: pyramid.security.Everyone


and pyramid.security.Authenticated. On top of these we have already mentioned the required
principals for this application in the original design. The user has two possible roles: editor or basic.
These will be prefixed by the string role: to avoid clashing with any other types of principals.

Open the file tutorial/security.py and edit it as follows:

236 Contents
The Pyramid Web Framework, Version 1.9.4

1 from pyramid.authentication import AuthTktAuthenticationPolicy


2 from pyramid.authorization import ACLAuthorizationPolicy
3 from pyramid.security import (
4 Authenticated,
5 Everyone,
6 )
7

8 from .models import User


9

10

11 class MyAuthenticationPolicy(AuthTktAuthenticationPolicy):
12 def authenticated_userid(self, request):
13 user = request.user
14 if user is not None:
15 return user.id
16

17 def effective_principals(self, request):


18 principals = [Everyone]
19 user = request.user
20 if user is not None:
21 principals.append(Authenticated)
22 principals.append(str(user.id))
23 principals.append('role:' + user.role)
24 return principals
25

26 def get_user(request):
27 user_id = request.unauthenticated_userid
28 if user_id is not None:
29 user = request.dbsession.query(User).get(user_id)
30 return user
31

32 def includeme(config):
33 settings = config.get_settings()
34 authn_policy = MyAuthenticationPolicy(
35 settings['auth.secret'],
36 hashalg='sha512',
37 )
38 config.set_authentication_policy(authn_policy)
39 config.set_authorization_policy(ACLAuthorizationPolicy())
40 config.add_request_method(get_user, 'user', reify=True)

Only the highlighted lines need to be added.

0.2. Tutorials 237


The Pyramid Web Framework, Version 1.9.4

Note that the role comes from the User object. We also add the user.id as a principal for when we
want to allow that exact user to edit pages which they have created.

Add the authorization policy

We already added the authorization policy in the previous chapter because Pyramid requires one when
adding an authentication policy. However, it was not used anywhere, so we’ll mention it now.
In the file tutorial/security.py, notice the following lines:

38 config.set_authentication_policy(authn_policy)
39 config.set_authorization_policy(ACLAuthorizationPolicy())
40 config.add_request_method(get_user, 'user', reify=True)

We’re using the pyramid.authorization.ACLAuthorizationPolicy, which will suffice for


most applications. It uses the context to define the mapping between a principal and permission for the
current request via the __acl__.

Add resources and ACLs

Resources are the hidden gem of Pyramid. You’ve made it!


Every URL in a web application represents a resource (the ”R” in Uniform Resource Locator). Often the
resource is something in your data model, but it could also be an abstraction over many models.
Our wiki has two resources:
1. A NewPage. Represents a potential Page that does not exist. Any logged-in user, having either
role of basic or editor, can create pages.
2. A PageResource. Represents a Page that is to be viewed or edited. editor users, as well as
the original creator of the Page, may edit the PageResource. Anyone may view it.

The wiki data model is simple enough that the PageResource is mostly redundant with our
models.Page SQLAlchemy class. It is completely valid to combine these into one class. However,
for this tutorial, they are explicitly separated to make clear the distinction between the parts about which
Pyramid cares versus application-defined objects.

There are many ways to define these resources, and they can even be grouped into collections with a
hierarchy. However, we’re keeping it simple here!
Open the file tutorial/routes.py and edit the following lines:

238 Contents
The Pyramid Web Framework, Version 1.9.4

1 from pyramid.httpexceptions import (


2 HTTPNotFound,
3 HTTPFound,
4 )
5 from pyramid.security import (
6 Allow,
7 Everyone,
8 )
9

10 from .models import Page


11

12 def includeme(config):
13 config.add_static_view('static', 'static', cache_max_age=3600)
14 config.add_route('view_wiki', '/')
15 config.add_route('login', '/login')
16 config.add_route('logout', '/logout')
17 config.add_route('view_page', '/{pagename}', factory=page_
,→factory)

18 config.add_route('add_page', '/add_page/{pagename}',
19 factory=new_page_factory)
20 config.add_route('edit_page', '/{pagename}/edit_page',
21 factory=page_factory)
22

23 def new_page_factory(request):
24 pagename = request.matchdict['pagename']
25 if request.dbsession.query(Page).filter_by(name=pagename).
,→count() > 0:

26 next_url = request.route_url('edit_page', pagename=pagename)


27 raise HTTPFound(location=next_url)
28 return NewPage(pagename)
29

30 class NewPage(object):
31 def __init__(self, pagename):
32 self.pagename = pagename
33

34 def __acl__(self):
35 return [
36 (Allow, 'role:editor', 'create'),
37 (Allow, 'role:basic', 'create'),
38 ]
39

40 def page_factory(request):
(continues on next page)

0.2. Tutorials 239


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


41 pagename = request.matchdict['pagename']
42 page = request.dbsession.query(Page).filter_by(name=pagename).
,→first()

43 if page is None:
44 raise HTTPNotFound
45 return PageResource(page)
46

47 class PageResource(object):
48 def __init__(self, page):
49 self.page = page
50

51 def __acl__(self):
52 return [
53 (Allow, Everyone, 'view'),
54 (Allow, 'role:editor', 'edit'),
55 (Allow, str(self.page.creator_id), 'edit'),
56 ]

The highlighted lines need to be edited or added.

The NewPage class has an __acl__ on it that returns a list of mappings from principal to permission.
This defines who can do what with that resource. In our case we want to allow only those users with the
principals of either role:editor or role:basic to have the create permission:

30 class NewPage(object):
31 def __init__(self, pagename):
32 self.pagename = pagename
33

34 def __acl__(self):
35 return [
36 (Allow, 'role:editor', 'create'),
37 (Allow, 'role:basic', 'create'),
38 ]

The NewPage is loaded as the context of the add_page route by declaring a factory on the route:

18 config.add_route('add_page', '/add_page/{pagename}',
19 factory=new_page_factory)

The PageResource class defines the ACL for a Page. It uses an actual Page object to determine who
can do what to the page.

240 Contents
The Pyramid Web Framework, Version 1.9.4

47 class PageResource(object):
48 def __init__(self, page):
49 self.page = page
50

51 def __acl__(self):
52 return [
53 (Allow, Everyone, 'view'),
54 (Allow, 'role:editor', 'edit'),
55 (Allow, str(self.page.creator_id), 'edit'),
56 ]

The PageResource is loaded as the context of the view_page and edit_page routes by declaring
a factory on the routes:

17 config.add_route('view_page', '/{pagename}', factory=page_


,→ factory)
18 config.add_route('add_page', '/add_page/{pagename}',
19 factory=new_page_factory)
20 config.add_route('edit_page', '/{pagename}/edit_page',
21 factory=page_factory)

Add view permissions

At this point we’ve modified our application to load the PageResource, including the actual Page
model in the page_factory. The PageResource is now the context for all view_page and
edit_page views. Similarly the NewPage will be the context for the add_page view.

Open the file tutorial/views/default.py.

First, you can drop a few imports that are no longer necessary:

5 from pyramid.httpexceptions import HTTPFound


6 from pyramid.view import view_config
7

Edit the view_page view to declare the view permission, and remove the explicit checks within the
view:

0.2. Tutorials 241


The Pyramid Web Framework, Version 1.9.4

18 @view_config(route_name='view_page', renderer='../templates/view.
,→jinja2',

19 permission='view')
20 def view_page(request):
21 page = request.context.page
22

23 def add_link(match):

The work of loading the page has already been done in the factory, so we can just pull the page object
out of the PageResource, loaded as request.context. Our factory also guarantees we will have
a Page, as it raises the HTTPNotFound exception if no Page exists, again simplifying the view logic.

Edit the edit_page view to declare the edit permission:

38 @view_config(route_name='edit_page', renderer='../templates/edit.
,→jinja2',

39 permission='edit')
40 def edit_page(request):
41 page = request.context.page
42 if 'form.submitted' in request.params:

Edit the add_page view to declare the create permission:

52 @view_config(route_name='add_page', renderer='../templates/edit.
,→jinja2',

53 permission='create')
54 def add_page(request):
55 pagename = request.context.pagename
56 if 'form.submitted' in request.params:

Note the pagename here is pulled off of the context instead of request.matchdict. The factory
has done a lot of work for us to hide the actual route pattern.

The ACLs defined on each resource are used by the authorization policy to determine if any principal
is allowed to have some permission. If this check fails (for example, the user is not logged in) then an
HTTPForbidden exception will be raised automatically. Thus we’re able to drop those exceptions and
checks from the views themselves. Rather we’ve defined them in terms of operations on a resource.

The final tutorial/views/default.py should look like the following:

242 Contents
The Pyramid Web Framework, Version 1.9.4

1 from pyramid.compat import escape


2 import re
3 from docutils.core import publish_parts
4

5 from pyramid.httpexceptions import HTTPFound


6 from pyramid.view import view_config
7

8 from ..models import Page


9

10 # regular expression used to find WikiWords


11 wikiwords = re.compile(r"\b([A-Z]\w+[A-Z]+\w+)")
12

13 @view_config(route_name='view_wiki')
14 def view_wiki(request):
15 next_url = request.route_url('view_page', pagename='FrontPage')
16 return HTTPFound(location=next_url)
17

18 @view_config(route_name='view_page', renderer='../templates/view.
,→jinja2',

19 permission='view')
20 def view_page(request):
21 page = request.context.page
22

23 def add_link(match):
24 word = match.group(1)
25 exists = request.dbsession.query(Page).filter_by(name=word).
,→all()

26 if exists:
27 view_url = request.route_url('view_page', pagename=word)
28 return '<a href="%s">%s</a>' % (view_url, escape(word))
29 else:
30 add_url = request.route_url('add_page', pagename=word)
31 return '<a href="%s">%s</a>' % (add_url, escape(word))
32

33 content = publish_parts(page.data, writer_name='html')['html_


,→ body']
34 content = wikiwords.sub(add_link, content)
35 edit_url = request.route_url('edit_page', pagename=page.name)
36 return dict(page=page, content=content, edit_url=edit_url)
37

38 @view_config(route_name='edit_page', renderer='../templates/edit.
,→jinja2',

(continues on next page)

0.2. Tutorials 243


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


39 permission='edit')
40 def edit_page(request):
41 page = request.context.page
42 if 'form.submitted' in request.params:
43 page.data = request.params['body']
44 next_url = request.route_url('view_page', pagename=page.
,→name)

45 return HTTPFound(location=next_url)
46 return dict(
47 pagename=page.name,
48 pagedata=page.data,
49 save_url=request.route_url('edit_page', pagename=page.name),
50 )
51

52 @view_config(route_name='add_page', renderer='../templates/edit.
,→jinja2',

53 permission='create')
54 def add_page(request):
55 pagename = request.context.pagename
56 if 'form.submitted' in request.params:
57 body = request.params['body']
58 page = Page(name=pagename, data=body)
59 page.creator = request.user
60 request.dbsession.add(page)
61 next_url = request.route_url('view_page', pagename=pagename)
62 return HTTPFound(location=next_url)
63 save_url = request.route_url('add_page', pagename=pagename)
64 return dict(pagename=pagename, pagedata='', save_url=save_url)

Viewing the application in a browser

We can finally examine our application in a browser (See Start the application). Launch a browser and
visit each of the following URLs, checking that the result is as expected:

• http://localhost:6543/ invokes the view_wiki view. This always redirects to the view_page
view of the FrontPage page object. It is executable by any user.

• http://localhost:6543/FrontPage invokes the view_page view of the FrontPage page object.


There is a ”Login” link in the upper right corner while the user is not authenticated, else it is a
”Logout” link when the user is authenticated.

244 Contents
The Pyramid Web Framework, Version 1.9.4

• http://localhost:6543/FrontPage/edit_page invokes the edit_page view for the FrontPage page


object. It is executable by only the editor user. If a different user (or the anonymous user) invokes
it, then a login form will be displayed. Supplying the credentials with the username editor and
password editor will display the edit page form.

• http://localhost:6543/add_page/SomePageName invokes the add_page view for a page. If the


page already exists, then it redirects the user to the edit_page view for the page object. It is
executable by either the editor or basic user. If a different user (or the anonymous user) invokes
it, then a login form will be displayed. Supplying the credentials with either the username editor
and password editor, or username basic and password basic, will display the edit page form.

• http://localhost:6543/SomePageName/edit_page invokes the edit_page view for an existing


page, or generates an error if the page does not exist. It is editable by the basic user if the page
was created by that user in the previous step. If, instead, the page was created by the editor user,
then the login page should be shown for the basic user.

• After logging in (as a result of hitting an edit or add page and submitting the login form with the
editor credentials), we’ll see a ”Logout” link in the upper right hand corner. When we click it,
we’re logged out, redirected back to the front page, and a ”Login” link is shown in the upper right
hand corner.

Adding Tests

We will now add tests for the models and views as well as a few functional tests in a new tests subpack-
age. Tests ensure that an application works, and that it continues to work when changes are made in the
future.

The file tests.py was generated as part of the alchemy cookiecutter, but it is a common practice to
put tests into a tests subpackage, especially as projects grow in size and complexity. Each module in the
test subpackage should contain tests for its corresponding module in our application. Each corresponding
pair of modules should have the same names, except the test module should have the prefix test_.

Start by deleting tests.py, then create a new directory to contain our new tests as well as a new empty
file tests/__init__.py.

It is very important when refactoring a Python module into a package to be sure to delete the
cache files (.pyc files or __pycache__ folders) sitting around! Python will prioritize the cache
files before traversing into folders, using the old code, and you will wonder why none of your changes
are working!

0.2. Tutorials 245


The Pyramid Web Framework, Version 1.9.4

Test the views

We’ll create a new tests/test_views.py file, adding a BaseTest class used as the base for other
test classes. Next we’ll add tests for each view function we previously added to our application. We’ll add
four test classes: ViewWikiTests, ViewPageTests, AddPageTests, and EditPageTests.
These test the view_wiki, view_page, add_page, and edit_page views.

Functional tests

We’ll test the whole application, covering security aspects that are not tested in the unit tests, like logging
in, logging out, checking that the basic user cannot edit pages that it didn’t create but the editor user
can, and so on.

View the results of all our edits to tests subpackage

Create tutorial/tests/test_views.py such that it appears as follows:

1 import unittest
2 import transaction
3

4 from pyramid import testing


5

7 def dummy_request(dbsession):
8 return testing.DummyRequest(dbsession=dbsession)
9

10

11 class BaseTest(unittest.TestCase):
12 def setUp(self):
13 from ..models import get_tm_session
14 self.config = testing.setUp(settings={
15 'sqlalchemy.url': 'sqlite:///:memory:'
16 })
17 self.config.include('..models')
18 self.config.include('..routes')
19

20 session_factory = self.config.registry['dbsession_factory']
21 self.session = get_tm_session(session_factory, transaction.
,→manager)

(continues on next page)

246 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


22

23 self.init_database()
24

25 def init_database(self):
26 from ..models.meta import Base
27 session_factory = self.config.registry['dbsession_factory']
28 engine = session_factory.kw['bind']
29 Base.metadata.create_all(engine)
30

31 def tearDown(self):
32 testing.tearDown()
33 transaction.abort()
34

35 def makeUser(self, name, role, password='dummy'):


36 from ..models import User
37 user = User(name=name, role=role)
38 user.set_password(password)
39 return user
40

41 def makePage(self, name, data, creator):


42 from ..models import Page
43 return Page(name=name, data=data, creator=creator)
44

45

46 class ViewWikiTests(unittest.TestCase):
47 def setUp(self):
48 self.config = testing.setUp()
49 self.config.include('..routes')
50

51 def tearDown(self):
52 testing.tearDown()
53

54 def _callFUT(self, request):


55 from tutorial.views.default import view_wiki
56 return view_wiki(request)
57

58 def test_it(self):
59 request = testing.DummyRequest()
60 response = self._callFUT(request)
61 self.assertEqual(response.location, 'http://example.com/
,→FrontPage')

(continues on next page)

0.2. Tutorials 247


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


62

63

64 class ViewPageTests(BaseTest):
65 def _callFUT(self, request):
66 from tutorial.views.default import view_page
67 return view_page(request)
68

69 def test_it(self):
70 from ..routes import PageResource
71

72 # add a page to the db


73 user = self.makeUser('foo', 'editor')
74 page = self.makePage('IDoExist', 'Hello CruelWorld IDoExist
,→', user)

75 self.session.add_all([page, user])
76

77 # create a request asking for the page we've created


78 request = dummy_request(self.session)
79 request.context = PageResource(page)
80

81 # call the view we're testing and check its behavior


82 info = self._callFUT(request)
83 self.assertEqual(info['page'], page)
84 self.assertEqual(
85 info['content'],
86 '<div class="document">\n'
87 '<p>Hello <a href="http://example.com/add_page/
,→CruelWorld">'

88 'CruelWorld</a> '
89 '<a href="http://example.com/IDoExist">'
90 'IDoExist</a>'
91 '</p>\n</div>\n')
92 self.assertEqual(info['edit_url'],
93 'http://example.com/IDoExist/edit_page')
94

95

96 class AddPageTests(BaseTest):
97 def _callFUT(self, request):
98 from tutorial.views.default import add_page
99 return add_page(request)
100

(continues on next page)

248 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


101 def test_it_pageexists(self):
102 from ..models import Page
103 from ..routes import NewPage
104 request = testing.DummyRequest({'form.submitted': True,
105 'body': 'Hello yo!'},
106 dbsession=self.session)
107 request.user = self.makeUser('foo', 'editor')
108 request.context = NewPage('AnotherPage')
109 self._callFUT(request)
110 pagecount = self.session.query(Page).filter_by(name=
,→'AnotherPage').count()

111 self.assertGreater(pagecount, 0)
112

113 def test_it_notsubmitted(self):


114 from ..routes import NewPage
115 request = dummy_request(self.session)
116 request.user = self.makeUser('foo', 'editor')
117 request.context = NewPage('AnotherPage')
118 info = self._callFUT(request)
119 self.assertEqual(info['pagedata'], '')
120 self.assertEqual(info['save_url'],
121 'http://example.com/add_page/AnotherPage')
122

123 def test_it_submitted(self):


124 from ..models import Page
125 from ..routes import NewPage
126 request = testing.DummyRequest({'form.submitted': True,
127 'body': 'Hello yo!'},
128 dbsession=self.session)
129 request.user = self.makeUser('foo', 'editor')
130 request.context = NewPage('AnotherPage')
131 self._callFUT(request)
132 page = self.session.query(Page).filter_by(name='AnotherPage
,→').one()

133 self.assertEqual(page.data, 'Hello yo!')


134

135

136 class EditPageTests(BaseTest):


137 def _callFUT(self, request):
138 from tutorial.views.default import edit_page
139 return edit_page(request)
(continues on next page)

0.2. Tutorials 249


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


140

141 def makeContext(self, page):


142 from ..routes import PageResource
143 return PageResource(page)
144

145 def test_it_notsubmitted(self):


146 user = self.makeUser('foo', 'editor')
147 page = self.makePage('abc', 'hello', user)
148 self.session.add_all([page, user])
149

150 request = dummy_request(self.session)


151 request.context = self.makeContext(page)
152 info = self._callFUT(request)
153 self.assertEqual(info['pagename'], 'abc')
154 self.assertEqual(info['save_url'],
155 'http://example.com/abc/edit_page')
156

157 def test_it_submitted(self):


158 user = self.makeUser('foo', 'editor')
159 page = self.makePage('abc', 'hello', user)
160 self.session.add_all([page, user])
161

162 request = testing.DummyRequest({'form.submitted': True,


163 'body': 'Hello yo!'},
164 dbsession=self.session)
165 request.context = self.makeContext(page)
166 response = self._callFUT(request)
167 self.assertEqual(response.location, 'http://example.com/abc
')
,→

168 self.assertEqual(page.data, 'Hello yo!')

Create tutorial/tests/test_functional.py such that it appears as follows:

1 import transaction
2 import unittest
3 import webtest
4

6 class FunctionalTests(unittest.TestCase):
7

8 basic_login = (
(continues on next page)

250 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


9 '/login?login=basic&password=basic'
10 '&next=FrontPage&form.submitted=Login')
11 basic_wrong_login = (
12 '/login?login=basic&password=incorrect'
13 '&next=FrontPage&form.submitted=Login')
14 basic_login_no_next = (
15 '/login?login=basic&password=basic'
16 '&form.submitted=Login')
17 editor_login = (
18 '/login?login=editor&password=editor'
19 '&next=FrontPage&form.submitted=Login')
20

21 @classmethod
22 def setUpClass(cls):
23 from tutorial.models.meta import Base
24 from tutorial.models import (
25 User,
26 Page,
27 get_tm_session,
28 )
29 from tutorial import main
30

31 settings = {
32 'sqlalchemy.url': 'sqlite://',
33 'auth.secret': 'seekrit',
34 }
35 app = main({}, **settings)
36 cls.testapp = webtest.TestApp(app)
37

38 session_factory = app.registry['dbsession_factory']
39 cls.engine = session_factory.kw['bind']
40 Base.metadata.create_all(bind=cls.engine)
41

42 with transaction.manager:
43 dbsession = get_tm_session(session_factory, transaction.
,→manager)

44 editor = User(name='editor', role='editor')


45 editor.set_password('editor')
46 basic = User(name='basic', role='basic')
47 basic.set_password('basic')
48 page1 = Page(name='FrontPage', data='This is the front␣
,→page')
(continues on next page)

0.2. Tutorials 251


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


49 page1.creator = editor
50 page2 = Page(name='BackPage', data='This is the back␣
page')
,→

51 page2.creator = basic
52 dbsession.add_all([basic, editor, page1, page2])
53

54 @classmethod
55 def tearDownClass(cls):
56 from tutorial.models.meta import Base
57 Base.metadata.drop_all(bind=cls.engine)
58

59 def test_root(self):
60 res = self.testapp.get('/', status=302)
61 self.assertEqual(res.location, 'http://localhost/FrontPage')
62

63 def test_FrontPage(self):
64 res = self.testapp.get('/FrontPage', status=200)
65 self.assertTrue(b'FrontPage' in res.body)
66

67 def test_unexisting_page(self):
68 self.testapp.get('/SomePage', status=404)
69

70 def test_successful_log_in(self):
71 res = self.testapp.get(self.basic_login, status=302)
72 self.assertEqual(res.location, 'http://localhost/FrontPage')
73

74 def test_successful_log_in_no_next(self):
75 res = self.testapp.get(self.basic_login_no_next, status=302)
76 self.assertEqual(res.location, 'http://localhost/')
77

78 def test_failed_log_in(self):
79 res = self.testapp.get(self.basic_wrong_login, status=200)
80 self.assertTrue(b'login' in res.body)
81

82 def test_logout_link_present_when_logged_in(self):
83 self.testapp.get(self.basic_login, status=302)
84 res = self.testapp.get('/FrontPage', status=200)
85 self.assertTrue(b'Logout' in res.body)
86

87 def test_logout_link_not_present_after_logged_out(self):
88 self.testapp.get(self.basic_login, status=302)
(continues on next page)

252 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


89 self.testapp.get('/FrontPage', status=200)
90 res = self.testapp.get('/logout', status=302)
91 self.assertTrue(b'Logout' not in res.body)
92

93 def test_anonymous_user_cannot_edit(self):
94 res = self.testapp.get('/FrontPage/edit_page', status=302).
,→follow()

95 self.assertTrue(b'Login' in res.body)
96

97 def test_anonymous_user_cannot_add(self):
98 res = self.testapp.get('/add_page/NewPage', status=302).
,→follow()

99 self.assertTrue(b'Login' in res.body)
100

101 def test_basic_user_cannot_edit_front(self):


102 self.testapp.get(self.basic_login, status=302)
103 res = self.testapp.get('/FrontPage/edit_page', status=302).
,→follow()

104 self.assertTrue(b'Login' in res.body)


105

106 def test_basic_user_can_edit_back(self):


107 self.testapp.get(self.basic_login, status=302)
108 res = self.testapp.get('/BackPage/edit_page', status=200)
109 self.assertTrue(b'Editing' in res.body)
110

111 def test_basic_user_can_add(self):


112 self.testapp.get(self.basic_login, status=302)
113 res = self.testapp.get('/add_page/NewPage', status=200)
114 self.assertTrue(b'Editing' in res.body)
115

116 def test_editors_member_user_can_edit(self):


117 self.testapp.get(self.editor_login, status=302)
118 res = self.testapp.get('/FrontPage/edit_page', status=200)
119 self.assertTrue(b'Editing' in res.body)
120

121 def test_editors_member_user_can_add(self):


122 self.testapp.get(self.editor_login, status=302)
123 res = self.testapp.get('/add_page/NewPage', status=200)
124 self.assertTrue(b'Editing' in res.body)
125

126 def test_editors_member_user_can_view(self):


(continues on next page)

0.2. Tutorials 253


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


127 self.testapp.get(self.editor_login, status=302)
128 res = self.testapp.get('/FrontPage', status=200)
129 self.assertTrue(b'FrontPage' in res.body)
130

131 def test_redirect_to_edit_for_existing_page(self):


132 self.testapp.get(self.editor_login, status=302)
133 res = self.testapp.get('/add_page/FrontPage', status=302)
134 self.assertTrue(b'FrontPage' in res.body)

Create tutorial/tests/test_initdb.py such that it appears as follows:

1 import os
2 import unittest
3

5 class TestInitializeDB(unittest.TestCase):
6

7 def test_usage(self):
8 from ..scripts.initializedb import main
9 with self.assertRaises(SystemExit):
10 main(argv=['foo'])
11

12 def test_run(self):
13 from ..scripts.initializedb import main
14 main(argv=['foo', 'development.ini'])
15 self.assertTrue(os.path.exists('tutorial.sqlite'))
16 os.remove('tutorial.sqlite')

Create tutorial/tests/test_security.py such that it appears as follows:

1 import unittest
2 from pyramid.testing import DummyRequest
3

5 class TestMyAuthenticationPolicy(unittest.TestCase):
6

7 def test_no_user(self):
8 request = DummyRequest()
9 request.user = None
10

(continues on next page)

254 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


11 from ..security import MyAuthenticationPolicy
12 policy = MyAuthenticationPolicy(None)
13 self.assertEqual(policy.authenticated_userid(request), None)
14

15 def test_authenticated_user(self):
16 from ..models import User
17 request = DummyRequest()
18 request.user = User()
19 request.user.id = 'foo'
20

21 from ..security import MyAuthenticationPolicy


22 policy = MyAuthenticationPolicy(None)
23 self.assertEqual(policy.authenticated_userid(request), 'foo
,→ ')

Create tutorial/tests/test_user_model.py such that it appears as follows:

1 import unittest
2 import transaction
3

4 from pyramid import testing


5

7 class BaseTest(unittest.TestCase):
8

9 def setUp(self):
10 from ..models import get_tm_session
11 self.config = testing.setUp(settings={
12 'sqlalchemy.url': 'sqlite:///:memory:'
13 })
14 self.config.include('..models')
15 self.config.include('..routes')
16

17 session_factory = self.config.registry['dbsession_factory']
18 self.session = get_tm_session(session_factory, transaction.
,→manager)

19

20 self.init_database()
21

22 def init_database(self):
23 from ..models.meta import Base
(continues on next page)

0.2. Tutorials 255


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


24 session_factory = self.config.registry['dbsession_factory']
25 engine = session_factory.kw['bind']
26 Base.metadata.create_all(engine)
27

28 def tearDown(self):
29 testing.tearDown()
30 transaction.abort()
31

32 def makeUser(self, name, role):


33 from ..models import User
34 return User(name=name, role=role)
35

36

37 class TestSetPassword(BaseTest):
38

39 def test_password_hash_saved(self):
40 user = self.makeUser(name='foo', role='bar')
41 self.assertFalse(user.password_hash)
42

43 user.set_password('secret')
44 self.assertTrue(user.password_hash)
45

46

47 class TestCheckPassword(BaseTest):
48

49 def test_password_hash_not_set(self):
50 user = self.makeUser(name='foo', role='bar')
51 self.assertFalse(user.password_hash)
52

53 self.assertFalse(user.check_password('secret'))
54

55 def test_correct_password(self):
56 user = self.makeUser(name='foo', role='bar')
57 user.set_password('secret')
58 self.assertTrue(user.password_hash)
59

60 self.assertTrue(user.check_password('secret'))
61

62 def test_incorrect_password(self):
63 user = self.makeUser(name='foo', role='bar')
64 user.set_password('secret')
(continues on next page)

256 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


65 self.assertTrue(user.password_hash)
66

67 self.assertFalse(user.check_password('incorrect'))

We’re utilizing the excellent WebTest package to do functional testing of the application. This is
defined in the tests_require section of our setup.py. Any other dependencies needed only for
testing purposes can be added there and will be installed automatically when running setup.py test.

Running the tests

We can run these tests similarly to how we did in Run the tests, but first delete the SQLite database
tutorial.sqlite. If you do not delete the database, then you will see an integrity error when running
the tests.
On UNIX:

$ rm tutorial.sqlite
$ $VENV/bin/py.test -q

On Windows:

c:\tutorial> del tutorial.sqlite


c:\tutorial> %VENV%\Scripts\py.test -q

The expected result should look like the following:

................................
32 passed in 9.90 seconds

Distributing Your Application

Once your application works properly, you can create a ”tarball” from it by using the setup.py sdist
command. The following commands assume your current working directory contains the tutorial
package and the setup.py file.
On UNIX:

0.2. Tutorials 257


The Pyramid Web Framework, Version 1.9.4

$ $VENV/bin/python setup.py sdist

On Windows:

c:\tutorial> %VENV%\Scripts\python setup.py sdist

The output of such a command will be something like:

running sdist
# more output
creating dist
Creating tar archive
removing 'tutorial-0.0' (and everything under it)

Note that this command creates a tarball in the dist subdirectory named tutorial-0.0.tar.gz.
You can send this file to your friends to show them your cool new application. They should be able to
install it by pointing the pip install command directly at it. Or you can upload it to PyPI and share it
with the rest of the world, where it can be downloaded via pip install remotely like any other package
people download from PyPI.

0.2.4 ZODB + Traversal Wiki Tutorial

This tutorial introduces a ZODB and traversal-based Pyramid application to a developer familiar with
Python. It will be most familiar to developers with previous Zope experience. When finished, the developer
will have created a basic Wiki application with authentication.

For cut and paste purposes, the source code for all stages of this tutorial can be browsed on GitHub at
GitHub for a specific branch or version under docs/tutorials/wiki/src, which corresponds to
the same location if you have Pyramid sources.

Background

This version of the Pyramid wiki tutorial presents a Pyramid application that uses technologies which will
be familiar to someone with Zope experience. It uses ZODB as a persistence mechanism and traversal to
map URLs to code. It can also be followed by people without any prior Python web framework experience.

To code along with this tutorial, the developer will need a UNIX machine with development tools (Mac
OS X with XCode, any Linux or BSD variant, and so on) or a Windows system of any kind.

258 Contents
The Pyramid Web Framework, Version 1.9.4

This tutorial has been written for Python 2. It is unlikely to work without modification under
Python 3.

Have fun!

Design

Following is a quick overview of the design of our wiki application, to help us understand the changes that
we will be making as we work through the tutorial.

Overall

We choose to use reStructuredText markup in the wiki text. Translation from reStructuredText to HTML
is provided by the widely used docutils Python module. We will add this module in the dependency
list on the project setup.py file.

Models

The root resource named Wiki will be a mapping of wiki page names to page resources. The page re-
sources will be instances of a Page class and they store the text content.

URLs like /PageName will be traversed using Wiki[ PageName ] => page, and the context that results is
the page resource of an existing page.

To add a page to the wiki, a new instance of the page resource is created and its name and reference are
added to the Wiki mapping.

A page named FrontPage containing the text This is the front page, will be created when the storage is
initialized, and will be used as the wiki home page.

Views

There will be three views to handle the normal operations of adding, editing, and viewing wiki pages, plus
one view for the wiki front page. Two templates will be used, one for viewing, and one for both adding
and editing wiki pages.

As of version 1.5 Pyramid no longer ships with templating systems. In this tutorial, we will use Chameleon.
Chameleon is a variant of ZPT , which is an XML-based templating language.

0.2. Tutorials 259


The Pyramid Web Framework, Version 1.9.4

Security

We’ll eventually be adding security to our application. The components we’ll use to do this are below.

• USERS, a dictionary mapping userids to their corresponding passwords.

• GROUPS, a dictionary mapping userids to a list of groups to which they belong.

• groupfinder, an authorization callback that looks up USERS and GROUPS. It will be provided
in a new security.py file.

• An ACL is attached to the root resource. Each row below details an ACE:

Action Principal Permission


Allow Everyone View
Allow group:editors Edit

• Permission declarations are added to the views to assert the security policies as each request is
handled.

Two additional views and one template will handle the login and logout tasks.

Summary

The URL, context, actions, template and permission associated to each view are listed in the following
table:

260 Contents
The Pyramid Web Framework, Version 1.9.4

URL View Context Action Template Permission


/ view_wiki Wiki Redirect to
/FrontPage
/PageName view_page1 Page Display exist- view.pt view
ing page2
/PageName/edit_page
edit_page Page Display edit edit.pt edit
form with
existing
content.
If the form
was submit-
ted, redirect to
/PageName
/add_page/PageName
add_page Wiki Create the edit.pt edit
page Pa-
geName in
storage, dis-
play the edit
form without
content.
If the form
was submit-
ted, redirect to
/PageName
/login login Wiki, Forbid- Display login login.pt
den3 form.
If the form
was sub-
mitted,
authenticate.
• If
authen-
tication
suc-
ceeds,
redirect
to the
page
that we
came
from.
• If
authen-
tication
fails,
0.2. Tutorials 261
display
login
form
The Pyramid Web Framework, Version 1.9.4

Installation

Before you begin

This tutorial assumes that you have already followed the steps in Installing Pyramid, except do not create
a virtual environment or install Pyramid. Thereby you will satisfy the following requirements.

• A Python interpreter is installed on your operating system.

• You’ve satisfied the Requirements for Installing Packages.

Install cookiecutter

We will use a cookiecutter to create a Python package project from a Python package project template. See
Cookiecutter Installation for instructions.

Generate a Pyramid project from a cookiecutter

We will create a Pyramid project in your home directory for UNIX or at the root for Windows. It is assumed
you know the path to where you installed cookiecutter. Issue the following commands and override
the defaults in the prompts as follows.

On UNIX

$ cd ~
$ cookiecutter gh:Pylons/pyramid-cookiecutter-zodb --checkout 1.9-
,→branch

On Windows

1 This is the default view for a Page context when there is no view name.
2 Pyramid will return a default 404 Not Found page if the page PageName does not exist yet.
3 pyramid.exceptions.Forbidden is reached when a user tries to invoke a view that is not authorized by the authorization

policy.

262 Contents
The Pyramid Web Framework, Version 1.9.4

c:\> cd \
c:\> cookiecutter gh:Pylons/pyramid-cookiecutter-zodb --checkout 1.
,→9-branch

On all operating systems

If prompted for the first item, accept the default yes by hitting return.

You've cloned ~/.cookiecutters/pyramid-cookiecutter-zodb before.


Is it okay to delete and re-clone it? [yes]: yes
project_name [Pyramid Scaffold]: myproj
repo_name [myproj]: tutorial

Change directory into your newly created project

On UNIX

$ cd tutorial

On Windows

c:\> cd tutorial

Set and use a VENV environment variable

We will set the VENV environment variable to the absolute path of the virtual environment, and use it going
forward.

On UNIX

0.2. Tutorials 263


The Pyramid Web Framework, Version 1.9.4

$ export VENV=~/tutorial

On Windows

c:\tutorial> set VENV=c:\tutorial

Create a virtual environment

On UNIX

$ python3 -m venv $VENV

On Windows

Each version of Python uses different paths, so you might need to adjust the path to the command for your
Python version. Recent versions of the Python 3 installer for Windows now install a Python launcher.

Python 2.7:

c:\tutorial> c:\Python27\Scripts\virtualenv %VENV%

Python 3.6:

c:\tutorial> python -m venv %VENV%

Upgrade packaging tools in the virtual environment

On UNIX

264 Contents
The Pyramid Web Framework, Version 1.9.4

$ $VENV/bin/pip install --upgrade pip setuptools

On Windows

c:\tutorial> %VENV%\Scripts\pip install --upgrade pip setuptools

Installing the project in development mode

In order to do development on the project easily, you must ”register” the project as a development egg
in your workspace. We will install testing requirements at the same time. We do so with the following
command.

On UNIX

$ $VENV/bin/pip install -e ".[testing]"

On Windows

c:\tutorial> %VENV%\Scripts\pip install -e ".[testing]"

On all operating systems

The console will show pip checking for packages and installing missing packages. Success executing this
command will show a line like the following:

0.2. Tutorials 265


The Pyramid Web Framework, Version 1.9.4

Successfully installed BTrees-4.3.1 Chameleon-3.0 Mako-1.0.6 \


MarkupSafe-0.23 PasteDeploy-1.5.2 Pygments-2.1.3 WebOb-1.6.3 \
WebTest-2.0.23 ZConfig-3.1.0 ZEO-5.0.4 ZODB-5.1.1 ZODB3-3.11.0 \
beautifulsoup4-4.5.1 coverage-4.2 mock-2.0.0 pbr-1.10.0 persistent-
,→4.2.2 \

py-1.4.31 pyramid-1.7.3 pyramid-chameleon-0.3 pyramid-debugtoolbar-


,→3.0.5 \

pyramid-mako-1.0.2 pyramid-tm-1.1.1 pyramid-zodbconn-0.7 pytest-3.0.


,→5 \

pytest-cov-2.4.0 repoze.lru-0.6 six-1.10.0 transaction-2.0.3 \


translationstring-1.3 tutorial venusian-1.0 waitress-1.0.1 \
zc.lockfile-1.2.1 zdaemon-4.2.0 zodbpickle-0.6.0 zodburi-2.0 \
zope.deprecation-4.2.0 zope.interface-4.3.3

Testing requirements are defined in our project’s setup.py file, in the tests_require and
extras_require stanzas.

24 tests_require = [
25 'WebTest >= 1.3.1', # py3 compat
26 'pytest',
27 'pytest-cov',
28 ]

48 extras_require={
49 'testing': tests_require,
50 },

Run the tests

After you’ve installed the project in development mode as well as the testing requirements, you may run
the tests for the project. The following commands provide options to py.test that specify the module for
which its tests shall be run, and to run py.test in quiet mode.

On UNIX

266 Contents
The Pyramid Web Framework, Version 1.9.4

$ $VENV/bin/py.test -q

On Windows

c:\tutorial> %VENV%\Scripts\py.test -q

For a successful test run, you should see output that ends like this:

.
1 passed in 0.24 seconds

Expose test coverage information

You can run the py.test command to see test coverage information. This runs the tests in the same way
that py.test does, but provides additional coverage information, exposing which lines of your project
are covered by the tests.

We’ve already installed the pytest-cov package into our virtual environment, so we can run the tests
with coverage.

On UNIX

$ $VENV/bin/py.test --cov --cov-report=term-missing

On Windows

c:\tutorial> %VENV%\Scripts\py.test --cov --cov-report=term-missing

If successful, you will see output something like this:

0.2. Tutorials 267


The Pyramid Web Framework, Version 1.9.4

======================== test session starts␣


,→========================

platform Python 3.6.0, pytest-3.0.5, py-1.4.31, pluggy-0.4.0


rootdir: /Users/stevepiercy/tutorial, inifile:
plugins: cov-2.4.0
collected 1 items

tutorial/tests.py .
------------------ coverage: platform Python 3.6.0 -----------------
,→-

Name Stmts Miss Cover Missing


-------------------------------------------------------
tutorial/__init__.py 14 9 36% 7-8, 14-20
tutorial/models.py 10 6 40% 9-14
tutorial/views.py 4 0 100%
-------------------------------------------------------
TOTAL 28 15 46%

===================== 1 passed in 0.31 seconds␣


,→======================

Our package doesn’t quite have 100% test coverage.

Test and coverage cookiecutter defaults

Cookiecutters include configuration defaults for py.test and test coverage. These configuration files
are pytest.ini and .coveragerc, located at the root of your package. Without these defaults, we
would need to specify the path to the module on which we want to run tests and coverage.

On UNIX

$ $VENV/bin/py.test --cov=tutorial tutorial/tests.py -q

On Windows

268 Contents
The Pyramid Web Framework, Version 1.9.4

c:\tutorial> %VENV%\Scripts\py.test --cov=tutorial tutorial\tests.


,→py -q

py.test follows conventions for Python test discovery, and the configuration defaults from the cookiecutter
tell py.test where to find the module on which we want to run tests and coverage.

See also:

See py.test’s documentation for Usage and Invocations or invoke py.test -h to see its full set of options.

Start the application

Start the application. See What Is This pserve Thing for more information on pserve.

On UNIX

$ $VENV/bin/pserve development.ini --reload

On Windows

c:\tutorial> %VENV%\Scripts\pserve development.ini --reload

Your OS firewall, if any, may pop up a dialog asking for authorization to allow python to accept
incoming network connections.

If successful, you will see something like this on your console:

Starting subprocess with file monitor


Starting server in PID 44078.
Serving on http://localhost:6543
Serving on http://localhost:6543

This means the server is ready to accept requests.

0.2. Tutorials 269


The Pyramid Web Framework, Version 1.9.4

Visit the application in a browser

In a browser, visit http://localhost:6543/. You will see the generated application’s default page.

One thing you’ll notice is the ”debug toolbar” icon on right hand side of the page. You can read more about
the purpose of the icon at The Debug Toolbar. It allows you to get information about your application while
you develop.

Decisions the zodb cookiecutter has made for you

Creating a project using the zodb cookiecutter makes the following assumptions:

• You are willing to use ZODB for persistent storage.

• You are willing to use traversal to map URLs to code.

• You want to use pyramid_zodbconn, pyramid_tm, and the transaction packages to manage connec-
tions and transactions with ZODB.

• You want to use pyramid_chameleon to render your templates. Different templating engines can
be used, but we had to choose one to make this tutorial. See Available Add-On Template System
Bindings for some options.

Pyramid supports any persistent storage mechanism (e.g., an SQL database or filesystem files). It
also supports an additional mechanism to map URLs to code (URL dispatch). However, for the purposes
of this tutorial, we’ll only be using traversal and ZODB.

Basic Layout

The starter files generated by the zodb cookiecutter are very basic, but they provide a good orientation
for the high-level patterns common to most traversal-based (and ZODB-based) Pyramid projects.

270 Contents
The Pyramid Web Framework, Version 1.9.4

Application configuration with __init__.py

A directory on disk can be turned into a Python package by containing an __init__.py file. Even if
empty, this marks a directory as a Python package. We use __init__.py both as a marker, indicating
the directory in which it’s contained is a package, and to contain application configuration code.

When you run the application using the pserve command using the development.ini gener-
ated configuration file, the application configuration points at a setuptools entry point described as
egg:tutorial. In our application, because the application’s setup.py file says so, this entry point
happens to be the main function within the file named __init__.py.

Open tutorial/__init__.py. It should already contain the following:

1 from pyramid.config import Configurator


2 from pyramid_zodbconn import get_connection
3 from .models import appmaker
4

6 def root_factory(request):
7 conn = get_connection(request)
8 return appmaker(conn.root())
9

10

11 def main(global_config, **settings):


12 """ This function returns a Pyramid WSGI application.
13 """
14 settings['tm.manager_hook'] = 'pyramid_tm.explicit_manager'
15 with Configurator(settings=settings) as config:
16 config.include('pyramid_chameleon')
17 config.include('pyramid_tm')
18 config.include('pyramid_retry')
19 config.include('pyramid_zodbconn')
20 config.set_root_factory(root_factory)
21 config.add_static_view('static', 'static', cache_max_
,→age=3600)

22 config.scan()
23 return config.make_wsgi_app()

1. Lines 1-3. Perform some dependency imports.

2. Lines 6-8. Define a root factory for our Pyramid application.

0.2. Tutorials 271


The Pyramid Web Framework, Version 1.9.4

3. Line 11. __init__.py defines a function named main.

4. Line 14. Use an explicit transaction manager for apps so that they do not implicitly create new
transactions when touching the manager outside of the pyramid_tm lifecycle.

5. Line 15. Construct a Configurator as a context manager with the settings keyword parsed by Past-
eDeploy.

6. Line 16. Include support for the Chameleon template rendering bindings, allowing us to use the .pt
templates.

7. Line 17. Include support for pyramid_tm, allowing Pyramid requests to join the active transaction
as provided by the transaction package.

8. Line 18. Include support for pyramid_retry to retry a request when transient exceptions occur.

9. Line 19. Include support for pyramid_zodbconn, providing integration between ZODB and a
Pyramid application.

10. Line 20. Set a root factory using our function named root_factory.

11. Line 21. Register a ”static view”, which answers requests whose URL paths start with /static, us-
ing the pyramid.config.Configurator.add_static_view() method. This statement
registers a view that will serve up static assets, such as CSS and image files, for us, in this case, at
http://localhost:6543/static/ and below. The first argument is the ”name” static,
which indicates that the URL path prefix of the view will be /static. The second argument of
this tag is the ”path”, which is a relative asset specification, so it finds the resources it should serve
within the static directory inside the tutorial package. Alternatively the cookiecutter could
have used an absolute asset specification as the path (tutorial:static).

12. Line 22. Perform a scan. A scan will find configuration decoration, such as view configuration
decorators (e.g., @view_config) in the source code of the tutorial package and will take
actions based on these decorators. We don’t pass any arguments to scan(), which implies that the
scan should take place in the current package (in this case, tutorial). The cookiecutter could
have equivalently said config.scan('tutorial'), but it chose to omit the package name
argument.

13. Line 23. Use the pyramid.config.Configurator.make_wsgi_app() method to return


a WSGI application.

272 Contents
The Pyramid Web Framework, Version 1.9.4

Resources and models with models.py

Pyramid uses the word resource to describe objects arranged hierarchically in a resource tree. This tree
is consulted by traversal to map URLs to code. In this application, the resource tree represents the site
structure, but it also represents the domain model of the application, because each resource is a node stored
persistently in a ZODB database. The models.py file is where the zodb cookiecutter put the classes
that implement our resource objects, each of which also happens to be a domain model object.

Here is the source for models.py:

1 from persistent.mapping import PersistentMapping


2

4 class MyModel(PersistentMapping):
5 __parent__ = __name__ = None
6

8 def appmaker(zodb_root):
9 if 'app_root' not in zodb_root:
10 app_root = MyModel()
11 zodb_root['app_root'] = app_root
12 return zodb_root['app_root']

1. Lines 4-5. The MyModel resource class is implemented here. Instances of this class are capa-
ble of being persisted in ZODB because the class inherits from the persistent.mapping.
PersistentMapping class. The __parent__ and __name__ are important parts of the
traversal protocol. By default, set these to None to indicate that this is the root object.

2. Lines 8-12. appmaker is used to return the application root object. It is called on every request to
the Pyramid application. It also performs bootstrapping by creating an application root (inside the
ZODB root object) if one does not already exist. It is used by the root_factory we’ve defined
in our __init__.py.

Bootstrapping is done by first seeing if the database has the persistent application root. If not, we
make an instance, store it, and commit the transaction. We then return the application root object.

Views With views.py

Our cookiecutter generated a default views.py on our behalf. It contains a single view, which is used to
render the page shown when you visit the URL http://localhost:6543/.

Here is the source for views.py:

0.2. Tutorials 273


The Pyramid Web Framework, Version 1.9.4

1 from pyramid.view import view_config


2 from .models import MyModel
3

5 @view_config(context=MyModel, renderer='templates/mytemplate.pt')
6 def my_view(request):
7 return {'project': 'myproj'}

Let’s try to understand the components in this module:

1. Lines 1-2. Perform some dependency imports.

2. Line 5. Use the pyramid.view.view_config() configuration decoration to perform a view


configuration registration. This view configuration registration will be activated when the applica-
tion is started. It will be activated by virtue of it being found as the result of a scan (when Line 14
of __init__.py is run).

The @view_config decorator accepts a number of keyword arguments. We use two keyword
arguments here: context and renderer.

The context argument signifies that the decorated view callable should only be run when traversal
finds the tutorial.models.MyModel resource to be the context of a request. In English, this
means that when the URL / is visited, because MyModel is the root model, this view callable will
be invoked.

The renderer argument names an asset specification of templates/mytemplate.pt. This


asset specification points at a Chameleon template which lives in the mytemplate.pt file within
the templates directory of the tutorial package. And indeed if you look in the templates
directory of this package, you’ll see a mytemplate.pt template file, which renders the default
home page of the generated project. This asset specification is relative (to the view.py’s current pack-
age). Alternatively we could have used the absolute asset specification tutorial:templates/
mytemplate.pt, but chose to use the relative version.

Since this call to @view_config doesn’t pass a name argument, the my_view function which it
decorates represents the ”default” view callable used when the context is of the type MyModel.

3. Lines 6-7. We define a view callable named my_view, which we decorated in the step above. This
view callable is a function we write generated by the zodb cookiecutter that is given a request
and which returns a dictionary. The mytemplate.pt renderer named by the asset specification
in the step above will convert this dictionary to a response on our behalf.

The function returns the dictionary {'project':'tutorial'}. This dictionary is used by the
template named by the mytemplate.pt asset specification to fill in certain values on the page.

274 Contents
The Pyramid Web Framework, Version 1.9.4

Configuration in development.ini

The development.ini (in the tutorial project directory, as opposed to the tutorial package
directory) looks like this:

###
# app configuration
# https://docs.pylonsproject.org/projects/pyramid/en/latest/narr/
,→environment.html

###

[app:main]
use = egg:tutorial

pyramid.reload_templates = true
pyramid.debug_authorization = false
pyramid.debug_notfound = false
pyramid.debug_routematch = false
pyramid.default_locale_name = en
pyramid.includes =
pyramid_debugtoolbar

zodbconn.uri = file://%(here)s/Data.fs?connection_cache_size=20000

retry.attempts = 3

# By default, the toolbar only appears for clients from IP addresses


# '127.0.0.1' and '::1'.
# debugtoolbar.hosts = 127.0.0.1 ::1

###
# wsgi server configuration
###

[server:main]
use = egg:waitress#main
listen = localhost:6543

###
# logging configuration
# https://docs.pylonsproject.org/projects/pyramid/en/latest/narr/
,→logging.html

(continues on next page)

0.2. Tutorials 275


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


###

[loggers]
keys = root, tutorial

[handlers]
keys = console

[formatters]
keys = generic

[logger_root]
level = INFO
handlers = console

[logger_tutorial]
level = DEBUG
handlers =
qualname = tutorial

[handler_console]
class = StreamHandler
args = (sys.stderr,)
level = NOTSET
formatter = generic

[formatter_generic]
format = %(asctime)s %(levelname)-5.5s [%(name)s:%(lineno)s][
,→%(threadName)s] %(message)s

Note the existence of a [app:main] section which specifies our WSGI application. Our ZODB database
settings are specified as the zodbconn.uri setting within this section. This value, and the other values
within this section, are passed as **settings to the main function we defined in __init__.py when
the server is started via pserve.

Defining the Domain Model

The first change we’ll make to our stock cookiecutter-generated application will be to define two resource
constructors, one representing a wiki page, and another representing the wiki as a mapping of wiki page
names to page objects. We’ll do this inside our models.py file.

276 Contents
The Pyramid Web Framework, Version 1.9.4

Because we’re using ZODB to represent our resource tree, each of these resource constructors represents
a domain model object, so we’ll call these constructors ”model constructors”. Both our Page and Wiki
constructors will be class objects. A single instance of the ”Wiki” class will serve as a container for
”Page” objects, which will be instances of the ”Page” class.

Delete the database

In the next step, we’re going to remove the MyModel Python model class from our models.py file.
Since this class is referred to within our persistent storage (represented on disk as a file named Data.fs),
we’ll have strange things happen the next time we want to visit the application in a browser. Remove the
Data.fs from the tutorial directory before proceeding any further. It’s always fine to do this as long
as you don’t care about the content of the database; the database itself will be recreated as necessary.

Edit models.py

There is nothing special about the filename models.py. A project may have many models through-
out its codebase in arbitrarily named files. Files implementing models often have model in their filenames
or they may live in a Python subpackage of your application package named models, but this is only by
convention.

Open tutorial/models.py file and edit it to look like the following:

1 from persistent import Persistent


2 from persistent.mapping import PersistentMapping
3

4 class Wiki(PersistentMapping):
5 __name__ = None
6 __parent__ = None
7

8 class Page(Persistent):
9 def __init__(self, data):
10 self.data = data
11

12 def appmaker(zodb_root):
13 if 'app_root' not in zodb_root:
14 app_root = Wiki()
(continues on next page)

0.2. Tutorials 277


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


15 frontpage = Page('This is the front page')
16 app_root['FrontPage'] = frontpage
17 frontpage.__name__ = 'FrontPage'
18 frontpage.__parent__ = app_root
19 zodb_root['app_root'] = app_root
20 return zodb_root['app_root']

The first thing we want to do is remove the MyModel class from the generated models.py file. The
MyModel class is only a sample and we’re not going to use it.

Then we’ll add an import at the top for the persistent.Persistent class. We’ll use this for a new
Page class in a moment.

Then we’ll add a Wiki class. We want it to inherit from the persistent.mapping.
PersistentMapping class because it provides mapping behavior, and it makes sure that our Wiki
page is stored as a ”first-class” persistent object in our ZODB database.

Our Wiki class should have two attributes set to None at class scope: __parent__ and __name__.
If a model has a __parent__ attribute of None in a traversal-based Pyramid application, it means that
it’s the root model. The __name__ of the root model is also always None.

Then we’ll add a Page class. This class should inherit from the persistent.Persistent class.
We’ll also give it an __init__ method that accepts a single parameter named data. This parameter will
contain the reStructuredText body representing the wiki page content. Note that Page objects don’t have
an initial __name__ or __parent__ attribute. All objects in a traversal graph must have a __name__
and a __parent__ attribute. We don’t specify these here because both __name__ and __parent__
will be set by a view function when a Page is added to our Wiki mapping.

As a last step, we want to change the appmaker function in our models.py file so that the root resource
of our application is a Wiki instance. We’ll also slot a single page object (the front page) into the Wiki
within the appmaker. This will provide traversal a resource tree to work against when it attempts to
resolve URLs to resources.

View the application in a browser

We can’t. At this point, our system is in a ”non-runnable” state; we’ll need to change view-related files in
the next chapter to be able to start the application successfully. If you try to start the application (See Start
the application), you’ll wind up with a Python traceback on your console that ends with this exception:

278 Contents
The Pyramid Web Framework, Version 1.9.4

ImportError: cannot import name MyModel

This will also happen if you attempt to run the tests.

Defining Views

A view callable in a traversal-based Pyramid application is typically a simple Python function that accepts
two parameters: context and request. A view callable is assumed to return a response object.

A Pyramid view can also be defined as callable which accepts only a request argument. You’ll
see this one-argument pattern used in other Pyramid tutorials and applications. Either calling convention
will work in any Pyramid application; the calling conventions can be used interchangeably as necessary.
In traversal-based applications, URLs are mapped to a context resource, and since our resource tree also
represents our application’s ”domain model”, we’re often interested in the context because it represents
the persistent storage of our application. For this reason, in this tutorial we define views as callables that
accept context in the callable argument list. If you do need the context within a view function that
only takes the request as a single argument, you can obtain it via request.context.

We’re going to define several view callable functions, then wire them into Pyramid using some view con-
figuration.

Declaring Dependencies in Our setup.py File

The view code in our application will depend on a package which is not a dependency of the original
”tutorial” application. The original ”tutorial” application was generated by the cookiecutter; it doesn’t
know about our custom application requirements.

We need to add a dependency on the docutils package to our tutorial package’s setup.py file
by assigning this dependency to the requires parameter in the setup() function.

Open setup.py and edit it to look like the following:

0.2. Tutorials 279


The Pyramid Web Framework, Version 1.9.4

1 import os
2

3 from setuptools import setup, find_packages


4

5 here = os.path.abspath(os.path.dirname(__file__))
6 with open(os.path.join(here, 'README.txt')) as f:
7 README = f.read()
8 with open(os.path.join(here, 'CHANGES.txt')) as f:
9 CHANGES = f.read()
10

11 requires = [
12 'plaster_pastedeploy',
13 'pyramid >= 1.9a',
14 'pyramid_chameleon',
15 'pyramid_debugtoolbar',
16 'pyramid_retry',
17 'pyramid_tm',
18 'pyramid_zodbconn',
19 'transaction',
20 'ZODB3',
21 'waitress',
22 'docutils',
23 ]
24

25 tests_require = [
26 'WebTest >= 1.3.1', # py3 compat
27 'pytest',
28 'pytest-cov',
29 ]
30

31 setup(
32 name='tutorial',
33 version='0.0',
34 description='myproj',
35 long_description=README + '\n\n' + CHANGES,
36 classifiers=[
37 'Programming Language :: Python',
38 'Framework :: Pyramid',
39 'Topic :: Internet :: WWW/HTTP',
40 'Topic :: Internet :: WWW/HTTP :: WSGI :: Application',
41 ],
42 author='',
(continues on next page)

280 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


43 author_email='',
44 url='',
45 keywords='web pyramid pylons',
46 packages=find_packages(),
47 include_package_data=True,
48 zip_safe=False,
49 extras_require={
50 'testing': tests_require,
51 },
52 install_requires=requires,
53 entry_points={
54 'paste.app_factory': [
55 'main = tutorial:main',
56 ],
57 },
58 )

Only the highlighted line needs to be added.

Running pip install -e .

Since a new software dependency was added, you will need to run pip install -e . again inside
the root of the tutorial package to obtain and register the newly added dependency distribution.

Make sure your current working directory is the root of the project (the directory in which setup.py
lives) and execute the following command.

On UNIX:

$ cd tutorial
$ $VENV/bin/pip install -e .

On Windows:

c:\> cd tutorial
c:\tutorial> %VENV%\Scripts\pip install -e .

Success executing this command will end with a line to the console something like:

0.2. Tutorials 281


The Pyramid Web Framework, Version 1.9.4

Successfully installed docutils-0.13.1 tutorial

Adding view functions in views.py

It’s time for a major change. Open tutorial/views.py and edit it to look like the following:

1 from docutils.core import publish_parts


2 import re
3

4 from pyramid.httpexceptions import HTTPFound


5 from pyramid.view import view_config
6

7 from .models import Page


8

9 # regular expression used to find WikiWords


10 wikiwords = re.compile(r"\b([A-Z]\w+[A-Z]+\w+)")
11

12 @view_config(context='.models.Wiki')
13 def view_wiki(context, request):
14 return HTTPFound(location=request.resource_url(context,
,→'FrontPage'))

15

16 @view_config(context='.models.Page', renderer='templates/view.pt')
17 def view_page(context, request):
18 wiki = context.__parent__
19

20 def check(match):
21 word = match.group(1)
22 if word in wiki:
23 page = wiki[word]
24 view_url = request.resource_url(page)
25 return '<a href="%s">%s</a>' % (view_url, word)
26 else:
27 add_url = request.application_url + '/add_page/' + word
28 return '<a href="%s">%s</a>' % (add_url, word)
29

30 content = publish_parts(context.data, writer_name='html')['html_


,→body']
31 content = wikiwords.sub(check, content)
(continues on next page)

282 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


32 edit_url = request.resource_url(context, 'edit_page')
33 return dict(page=context, content=content, edit_url=edit_url)
34

35 @view_config(name='add_page', context='.models.Wiki',
36 renderer='templates/edit.pt')
37 def add_page(context, request):
38 pagename = request.subpath[0]
39 if 'form.submitted' in request.params:
40 body = request.params['body']
41 page = Page(body)
42 page.__name__ = pagename
43 page.__parent__ = context
44 context[pagename] = page
45 return HTTPFound(location=request.resource_url(page))
46 save_url = request.resource_url(context, 'add_page', pagename)
47 page = Page('')
48 page.__name__ = pagename
49 page.__parent__ = context
50 return dict(page=page, save_url=save_url)
51

52 @view_config(name='edit_page', context='.models.Page',
53 renderer='templates/edit.pt')
54 def edit_page(context, request):
55 if 'form.submitted' in request.params:
56 context.data = request.params['body']
57 return HTTPFound(location=request.resource_url(context))
58

59 return dict(page=context,
60 save_url=request.resource_url(context, 'edit_page'))

We added some imports and created a regular expression to find ”WikiWords”.

We got rid of the my_view view function and its decorator that was added when we originally rendered
the zodb cookiecutter. It was only an example and isn’t relevant to our application.

Then we added four view callable functions to our views.py module:

• view_wiki() - Displays the wiki itself. It will answer on the root URL.

• view_page() - Displays an individual page.

• add_page() - Allows the user to add a page.

0.2. Tutorials 283


The Pyramid Web Framework, Version 1.9.4

• edit_page() - Allows the user to edit a page.

We’ll describe each one briefly in the following sections.

There is nothing special about the filename views.py. A project may have many view callables
throughout its codebase in arbitrarily named files. Files implementing view callables often have view in
their filenames (or may live in a Python subpackage of your application package named views), but this
is only by convention.

The view_wiki view function

Following is the code for the view_wiki view function and its decorator:

12 @view_config(context='.models.Wiki')
13 def view_wiki(context, request):
14 return HTTPFound(location=request.resource_url(context,
,→'FrontPage'))

In our code, we use an import that is relative to our package named tutorial, meaning we can
omit the name of the package in the import and context statements. In our narrative, however, we
refer to a class and thus we use the absolute form, meaning that the name of the package is included.

view_wiki() is the default view that gets called when a request is made to the root URL of our wiki.
It always redirects to an URL which represents the path to our ”FrontPage”.

We provide it with a @view_config decorator which names the class tutorial.models.Wiki as


its context. This means that when a Wiki resource is the context and no view name exists in the request, then
this view will be used. The view configuration associated with view_wiki does not use a renderer
because the view callable always returns a response object rather than a dictionary. No renderer is necessary
when a view returns a response object.

The view_wiki view callable always redirects to the URL of a Page resource named ”FrontPage”. To
do so, it returns an instance of the pyramid.httpexceptions.HTTPFound class (instances of
which implement the pyramid.interfaces.IResponse interface, like pyramid.response.
Response does). It uses the pyramid.request.Request.route_url() API to construct an
URL to the FrontPage page resource (i.e., http://localhost:6543/FrontPage), and uses it
as the ”location” of the HTTPFound response, forming an HTTP redirect.

284 Contents
The Pyramid Web Framework, Version 1.9.4

The view_page view function

Here is the code for the view_page view function and its decorator:

16 @view_config(context='.models.Page', renderer='templates/view.pt')
17 def view_page(context, request):
18 wiki = context.__parent__
19

20 def check(match):
21 word = match.group(1)
22 if word in wiki:
23 page = wiki[word]
24 view_url = request.resource_url(page)
25 return '<a href="%s">%s</a>' % (view_url, word)
26 else:
27 add_url = request.application_url + '/add_page/' + word
28 return '<a href="%s">%s</a>' % (add_url, word)
29

30 content = publish_parts(context.data, writer_name='html')['html_


,→ body']
31 content = wikiwords.sub(check, content)
32 edit_url = request.resource_url(context, 'edit_page')
33 return dict(page=context, content=content, edit_url=edit_url)

The view_page function is configured to respond as the default view of a Page resource. We provide
it with a @view_config decorator which names the class tutorial.models.Page as its context.
This means that when a Page resource is the context, and no view name exists in the request, this view will
be used. We inform Pyramid this view will use the templates/view.pt template file as a renderer.

The view_page function generates the reStructuredText body of a page (stored as the data attribute
of the context passed to the view; the context will be a Page resource) as HTML. Then it substitutes an
HTML anchor for each WikiWord reference in the rendered HTML using a compiled regular expression.

The curried function named check is used as the first argument to wikiwords.sub, indicating that
it should be called to provide a value for each WikiWord match found in the content. If the wiki (our
page’s __parent__) already contains a page with the matched WikiWord name, the check function
generates a view link to be used as the substitution value and returns it. If the wiki does not already contain
a page with the matched WikiWord name, the function generates an ”add” link as the substitution value
and returns it.

As a result, the content variable is now a fully formed bit of HTML containing various view and add
links for WikiWords based on the content of our current page resource.

0.2. Tutorials 285


The Pyramid Web Framework, Version 1.9.4

We then generate an edit URL because it’s easier to do here than in the template, and we wrap up a number
of arguments in a dictionary and return it.

The arguments we wrap into a dictionary include page, content, and edit_url. As a result, the
template associated with this view callable (via renderer= in its configuration) will be able to use
these names to perform various rendering tasks. The template associated with this view callable will be a
template which lives in templates/view.pt.

Note the contrast between this view callable and the view_wiki view callable. In the view_wiki
view callable, we unconditionally return a response object. In the view_page view callable, we return
a dictionary. It is always fine to return a response object from a Pyramid view. Returning a dictionary is
allowed only when there is a renderer associated with the view callable in the view configuration.

The add_page view function

Here is the code for the add_page view function and its decorator:

35 @view_config(name='add_page', context='.models.Wiki',
36 renderer='templates/edit.pt')
37 def add_page(context, request):
38 pagename = request.subpath[0]
39 if 'form.submitted' in request.params:
40 body = request.params['body']
41 page = Page(body)
42 page.__name__ = pagename
43 page.__parent__ = context
44 context[pagename] = page
45 return HTTPFound(location=request.resource_url(page))
46 save_url = request.resource_url(context, 'add_page', pagename)
47 page = Page('')
48 page.__name__ = pagename
49 page.__parent__ = context
50 return dict(page=page, save_url=save_url)

The add_page function is configured to respond when the context resource is a Wiki and the view name
is add_page. We provide it with a @view_config decorator which names the string add_page as
its view name (via name=), the class tutorial.models.Wiki as its context, and the renderer named
templates/edit.pt. This means that when a Wiki resource is the context, and a view name named
add_page exists as the result of traversal, this view will be used. We inform Pyramid this view will use
the templates/edit.pt template file as a renderer. We share the same template between add and
edit views, thus edit.pt instead of add.pt.

286 Contents
The Pyramid Web Framework, Version 1.9.4

The add_page function will be invoked when a user clicks on a WikiWord which isn’t yet represented as
a page in the system. The check function within the view_page view generates URLs to this view. It
also acts as a handler for the form that is generated when we want to add a page resource. The context
of the add_page view is always a Wiki resource (not a Page resource).

The request subpath in Pyramid is the sequence of names that are found after the view name in the URL
segments given in the PATH_INFO of the WSGI request as the result of traversal. If our add view is
invoked via, e.g., http://localhost:6543/add_page/SomeName, the subpath will be a tuple:
('SomeName',).

The add view takes the zeroth element of the subpath (the wiki page name), and aliases it to the name
attribute in order to know the name of the page we’re trying to add.

If the view rendering is not a result of a form submission (if the expression 'form.submitted' in
request.params is False), the view renders a template. To do so, it generates a ”save url” which the
template uses as the form post URL during rendering. We’re lazy here, so we’re trying to use the same
template (templates/edit.pt) for the add view as well as the page edit view. To do so, we create a
dummy Page resource object in order to satisfy the edit form’s desire to have some page object exposed as
page, and we’ll render the template to a response.

If the view rendering is a result of a form submission (if the expression 'form.submitted' in
request.params is True), we grab the page body from the form data, create a Page object using the
name in the subpath and the page body, and save it into ”our context” (the Wiki) using the __setitem__
method of the context. We then redirect back to the view_page view (the default view for a page) for
the newly created page.

The edit_page view function

Here is the code for the edit_page view function and its decorator:

52 @view_config(name='edit_page', context='.models.Page',
53 renderer='templates/edit.pt')
54 def edit_page(context, request):
55 if 'form.submitted' in request.params:
56 context.data = request.params['body']
57 return HTTPFound(location=request.resource_url(context))
58

59 return dict(page=context,
60 save_url=request.resource_url(context, 'edit_page'))

0.2. Tutorials 287


The Pyramid Web Framework, Version 1.9.4

The edit_page function is configured to respond when the context is a Page resource and the view name
is edit_page. We provide it with a @view_config decorator which names the string edit_page as
its view name (via name=), the class tutorial.models.Page as its context, and the renderer named
templates/edit.pt. This means that when a Page resource is the context, and a view name exists as
the result of traversal named edit_page, this view will be used. We inform Pyramid this view will use
the templates/edit.pt template file as a renderer.

The edit_page function will be invoked when a user clicks the ”Edit this Page” button on the view
form. It renders an edit form but it also acts as the form post view callable for the form it renders. The
context of the edit_page view will always be a Page resource (never a Wiki resource).

If the view execution is not a result of a form submission (if the expression 'form.submitted' in
request.params is False), the view simply renders the edit form, passing the page resource, and a
save_url which will be used as the action of the generated form.

If the view execution is a result of a form submission (if the expression 'form.submitted' in
request.params is True), the view grabs the body element of the request parameter and sets it
as the data attribute of the page context. It then redirects to the default view of the context (the page),
which will always be the view_page view.

Adding templates

The view_page, add_page and edit_page views that we’ve added reference a template. Each
template is a Chameleon ZPT template. These templates will live in the templates directory of our
tutorial package. Chameleon templates must have a .pt extension to be recognized as such.

The view.pt template

Rename tutorial/templates/mytemplate.pt to tutorial/templates/view.pt and


edit the emphasized lines to look like the following:

1 <!DOCTYPE html>
2 <html lang="${request.locale_name}">
3 <head>
4 <meta charset="utf-8">
5 <meta http-equiv="X-UA-Compatible" content="IE=edge">
6 <meta name="viewport" content="width=device-width, initial-
,→scale=1.0">

7 <meta name="description" content="pyramid web application">


(continues on next page)

288 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


8 <meta name="author" content="Pylons Project">
9 <link rel="shortcut icon" href="${request.static_url(
,→'tutorial:static/pyramid-16x16.png')}">

10

11 <title>${page.__name__} - Pyramid tutorial wiki (based on


12 TurboGears 20-Minute Wiki)</title>
13

14 <!-- Bootstrap core CSS -->


15 <link href="//oss.maxcdn.com/libs/twitter-bootstrap/3.0.3/css/
,→bootstrap.min.css" rel="stylesheet">

16

17 <!-- Custom styles for this scaffold -->


18 <link href="${request.static_url('tutorial:static/theme.css')}"␣
,→rel="stylesheet">

19

20 <!-- HTML5 shim and Respond.js IE8 support of HTML5 elements␣


,→and media queries -->
21 <!--[if lt IE 9]>
22 <script src="//oss.maxcdn.com/libs/html5shiv/3.7.0/html5shiv.
,→js" integrity="sha384-
,→0s5Pv64cNZJieYFkXYOTId2HMA2Lfb6q2nAcx2n0RTLUnCAoTTsS0nKEO27XyKcY"␣

,→crossorigin="anonymous"></script>

23 <script src="//oss.maxcdn.com/libs/respond.js/1.3.0/respond.
,→min.js" integrity="sha384-f1r2UzjsxZ9T4V1f2zBO/
,→evUqSEOpeaUUZcMTz1Up63bl4ruYnFYeM+BxI4NhyI0" crossorigin=

,→"anonymous"></script>

24 <![endif]-->
25 </head>
26

27 <body>
28

29 <div class="starter-template">
30 <div class="container">
31 <div class="row">
32 <div class="col-md-2">
33 <img class="logo img-responsive" src="${request.static_
,→url('tutorial:static/pyramid.png')}" alt="pyramid web framework">

34 </div>
35 <div class="col-md-10">
36 <div class="content">
37 <div tal:replace="structure content">
38 Page text goes here.

(continues on next page)

0.2. Tutorials 289


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


39 </div>
40 <p>
41 <a tal:attributes="href edit_url" href="">
42 Edit this page
43 </a>
44 </p>
45 <p>
46 Viewing <strong><span tal:replace="page.__name__">
47 Page Name Goes Here</span></strong>
48 </p>
49 <p>You can return to the
50 <a href="${request.application_url}">FrontPage</a>.
51 </p>
52 </div>
53 </div>
54 </div>
55 <div class="row">
56 <div class="copyright">
57 Copyright &copy; Pylons Project
58 </div>
59 </div>
60 </div>
61 </div>
62

63

64 <!-- Bootstrap core JavaScript


65 ================================================== -->
66 <!-- Placed at the end of the document so the pages load faster␣
,→-->

67 <script src="//oss.maxcdn.com/libs/jquery/1.10.2/jquery.min.js"␣
,→integrity="sha384-
,→aBL3Lzi6c9LNDGvpHkZrrm3ZVsIwohDD7CDozL0pk8FwCrfmV7H9w8j3L7ikEv6h"␣

,→crossorigin="anonymous"></script>

68 <script src="//oss.maxcdn.com/libs/twitter-bootstrap/3.0.3/js/
,→bootstrap.min.js" integrity="sha384-s1ITto93iSMDxlp/
,→79qhWHi+LsIi9Gx6yL+cOKDuymvihkfol83TYbLbOw+W/wv4" crossorigin=

,→"anonymous"></script>

69 </body>
70 </html>

This template is used by view_page() for displaying a single wiki page. It includes:

• A div element that is replaced with the content value provided by the view (lines 37-39).

290 Contents
The Pyramid Web Framework, Version 1.9.4

content contains HTML, so the structure keyword is used to prevent escaping it (i.e., chang-
ing ”>” to ”&gt;”, etc.)
• A link that points at the ”edit” URL which invokes the edit_page view for the page being viewed
(lines 41-43).

The edit.pt template

Copy tutorial/templates/view.pt to tutorial/templates/edit.pt and edit the em-


phasized lines to look like the following:

1 <!DOCTYPE html>
2 <html lang="${request.locale_name}">
3 <head>
4 <meta charset="utf-8">
5 <meta http-equiv="X-UA-Compatible" content="IE=edge">
6 <meta name="viewport" content="width=device-width, initial-
,→scale=1.0">

7 <meta name="description" content="pyramid web application">


8 <meta name="author" content="Pylons Project">
9 <link rel="shortcut icon" href="${request.static_url(
,→'tutorial:static/pyramid-16x16.png')}">

10

11 <title>${page.__name__} - Pyramid tutorial wiki (based on


12 TurboGears 20-Minute Wiki)</title>
13

14 <!-- Bootstrap core CSS -->


15 <link href="//oss.maxcdn.com/libs/twitter-bootstrap/3.0.3/css/
,→bootstrap.min.css" rel="stylesheet">

16

17 <!-- Custom styles for this scaffold -->


18 <link href="${request.static_url('tutorial:static/theme.css')}"␣
,→rel="stylesheet">

19

20 <!-- HTML5 shim and Respond.js IE8 support of HTML5 elements␣


,→and media queries -->
21 <!--[if lt IE 9]>
22 <script src="//oss.maxcdn.com/libs/html5shiv/3.7.0/html5shiv.
,→js" integrity="sha384-
,→0s5Pv64cNZJieYFkXYOTId2HMA2Lfb6q2nAcx2n0RTLUnCAoTTsS0nKEO27XyKcY"␣

,→crossorigin="anonymous"></script>

23 <script src="//oss.maxcdn.com/libs/respond.js/1.3.0/respond.
,→min.js" integrity="sha384-f1r2UzjsxZ9T4V1f2zBO/
,→evUqSEOpeaUUZcMTz1Up63bl4ruYnFYeM+BxI4NhyI0" crossorigin=
(continues on next page)
,→"anonymous"></script>

0.2. Tutorials 291


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


24 <![endif]-->
25 </head>
26 <body>
27

28 <div class="starter-template">
29 <div class="container">
30 <div class="row">
31 <div class="col-md-2">
32 <img class="logo img-responsive" src="${request.static_
,→url('tutorial:static/pyramid.png')}" alt="pyramid web framework">

33 </div>
34 <div class="col-md-10">
35 <div class="content">
36 <p>
37 Editing <strong><span tal:replace="page.__name__">
38 Page Name Goes Here</span></strong>
39 </p>
40 <p>You can return to the
41 <a href="${request.application_url}">FrontPage</a>.
42 </p>
43 <form action="${save_url}" method="post">
44 <div class="form-group">
45 <textarea class="form-control" name="body"␣
,→tal:content="page.data" rows="10" cols="60"></textarea>

46 </div>
47 <div class="form-group">
48 <button type="submit" name="form.submitted" value=
,→"Save" class="btn btn-default">Save</button>

49 </div>
50 </form>
51 </div>
52 </div>
53 </div>
54 <div class="row">
55 <div class="copyright">
56 Copyright &copy; Pylons Project
57 </div>
58 </div>
59 </div>
60 </div>
61

(continues on next page)

292 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


62

63 <!-- Bootstrap core JavaScript


64 ================================================== -->
65 <!-- Placed at the end of the document so the pages load faster␣
,→-->

66 <script src="//oss.maxcdn.com/libs/jquery/1.10.2/jquery.min.js"␣
,→integrity="sha384-
,→aBL3Lzi6c9LNDGvpHkZrrm3ZVsIwohDD7CDozL0pk8FwCrfmV7H9w8j3L7ikEv6h"␣

,→crossorigin="anonymous"></script>

67 <script src="//oss.maxcdn.com/libs/twitter-bootstrap/3.0.3/js/
,→bootstrap.min.js" integrity="sha384-s1ITto93iSMDxlp/
,→79qhWHi+LsIi9Gx6yL+cOKDuymvihkfol83TYbLbOw+W/wv4" crossorigin=

,→"anonymous"></script>

68 </body>
69 </html>

This template is used by add_page() and edit_page() for adding and editing a wiki page. It displays
a page containing a form that includes:
• A 10-row by 60-column textarea field named body that is filled with any existing page data
when it is rendered (line 46).
• A submit button that has the name form.submitted (line 49).
The form POSTs back to the save_url argument supplied by the view (line 44). The view will use the
body and form.submitted values.

Our templates use a request object that none of our tutorial views return in their dictionary.
request is one of several names that are available ”by default” in a template when a template renderer
is used. See System Values Used During Rendering for information about other names that are available
by default when a template is used as a renderer.

Static assets

Our templates name static assets, including CSS and images. We don’t need to create these files within our
package’s static directory because they were provided at the time we created the project.
As an example, the CSS file will be accessed via http://localhost:6543/static/theme.
css by virtue of the call to the add_static_view directive we’ve made in the __init__.py
file. Any number and type of static assets can be placed in this directory (or subdirectories) and
are just referred to by URL or by using the convenience method static_url, e.g., request.
static_url('<package>:static/foo.css') within templates.

0.2. Tutorials 293


The Pyramid Web Framework, Version 1.9.4

Viewing the application in a browser

We can finally examine our application in a browser (See Start the application). Launch a browser and
visit each of the following URLs, checking that the result is as expected:
• http://localhost:6543/ invokes the view_wiki view. This always redirects to the view_page
view of the FrontPage Page resource.
• http://localhost:6543/FrontPage/ invokes the view_page view of the front page resource. This is
because it’s the default view (a view without a name) for Page resources.
• http://localhost:6543/FrontPage/edit_page invokes the edit view for the FrontPage Page resource.
• http://localhost:6543/add_page/SomePageName invokes the add view for a Page.
• To generate an error, visit http://localhost:6543/add_page which will generate an IndexError:
tuple index out of range error. You’ll see an interactive traceback facility provided by
pyramid_debugtoolbar.

Adding authorization

Pyramid provides facilities for authentication and authorization. We’ll make use of both features to provide
security to our application. Our application currently allows anyone with access to the server to view, edit,
and add pages to our wiki. We’ll change that to allow only people who are members of a group named
group:editors to add and edit wiki pages, but we’ll continue allowing anyone with access to the server
to view pages.
We will also add a login page and a logout link on all the pages. The login page will be shown when a user
is denied access to any of the views that require permission, instead of a default ”403 Forbidden” page.
We will implement the access control with the following steps:
• Add password hashing dependencies.
• Add users and groups (security.py, a new module).
• Add an ACL (models.py).
• Add an authentication policy and an authorization policy (__init__.py).
• Add permission declarations to the edit_page and add_page views (views.py).
Then we will add the login and logout features:
• Add login and logout views (views.py).
• Add a login template (login.pt).
• Make the existing views return a logged_in flag to the renderer (views.py).
• Add a ”Logout” link to be shown when logged in and viewing or editing a page (view.pt, edit.
pt).

294 Contents
The Pyramid Web Framework, Version 1.9.4

Access control

Add dependencies

Just like in Defining Views, we need a new dependency. We need to add the bcrypt package, to our tutorial
package’s setup.py file by assigning this dependency to the requires parameter in the setup()
function.

Open setup.py and edit it to look like the following:

1 import os
2

3 from setuptools import setup, find_packages


4

5 here = os.path.abspath(os.path.dirname(__file__))
6 with open(os.path.join(here, 'README.txt')) as f:
7 README = f.read()
8 with open(os.path.join(here, 'CHANGES.txt')) as f:
9 CHANGES = f.read()
10

11 requires = [
12 'plaster_pastedeploy',
13 'pyramid >= 1.9a',
14 'pyramid_chameleon',
15 'pyramid_debugtoolbar',
16 'pyramid_retry',
17 'pyramid_tm',
18 'pyramid_zodbconn',
19 'transaction',
20 'ZODB3',
21 'waitress',
22 'docutils',
23 'bcrypt',
24 ]
25

26 tests_require = [
27 'WebTest >= 1.3.1', # py3 compat
28 'pytest',
29 'pytest-cov',
30 ]
31

(continues on next page)

0.2. Tutorials 295


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


32 setup(
33 name='tutorial',
34 version='0.0',
35 description='myproj',
36 long_description=README + '\n\n' + CHANGES,
37 classifiers=[
38 'Programming Language :: Python',
39 'Framework :: Pyramid',
40 'Topic :: Internet :: WWW/HTTP',
41 'Topic :: Internet :: WWW/HTTP :: WSGI :: Application',
42 ],
43 author='',
44 author_email='',
45 url='',
46 keywords='web pyramid pylons',
47 packages=find_packages(),
48 include_package_data=True,
49 zip_safe=False,
50 extras_require={
51 'testing': tests_require,
52 },
53 install_requires=requires,
54 entry_points={
55 'paste.app_factory': [
56 'main = tutorial:main',
57 ],
58 },
59 )

Only the highlighted line needs to be added.

Do not forget to run pip install -e . just like in Running pip install -e ..

We are using the bcrypt package from PyPI to hash our passwords securely. There are other
one-way hash algorithms for passwords if bcrypt is an issue on your system. Just make sure that it’s an
algorithm approved for storing passwords versus a generic one-way hash.

296 Contents
The Pyramid Web Framework, Version 1.9.4

Add users and groups

Create a new tutorial/security.py module with the following content:

1 import bcrypt
2

4 def hash_password(pw):
5 hashed_pw = bcrypt.hashpw(pw.encode('utf-8'), bcrypt.gensalt())
6 # return unicode instead of bytes because databases handle it␣
,→better

7 return hashed_pw.decode('utf-8')
8

9 def check_password(expected_hash, pw):


10 if expected_hash is not None:
11 return bcrypt.checkpw(pw.encode('utf-8'), expected_hash.
,→encode('utf-8'))

12 return False
13

14 USERS = {'editor': hash_password('editor'),


15 'viewer': hash_password('viewer')}
16 GROUPS = {'editor':['group:editors']}
17

18 def groupfinder(userid, request):


19 if userid in USERS:
20 return GROUPS.get(userid, [])

The groupfinder function accepts a userid and a request and returns one of these values:

• If userid exists in the system, it will return a sequence of group identifiers (or an empty sequence
if the user isn’t a member of any groups).

• If the userid does not exist in the system, it will return None.

For example, groupfinder('editor', request ) returns ['group:editor'],


groupfinder('viewer', request) returns [], and groupfinder('admin', request)
returns None. We will use groupfinder() as an authentication policy ”callback” that will provide
the principal or principals for a user.

There are two helper methods that will help us later to authenticate users. The first is hash_password
which takes a raw password and transforms it using bcrypt into an irreversible representation, a process
known as ”hashing”. The second method, check_password, will allow us to compare the hashed value

0.2. Tutorials 297


The Pyramid Web Framework, Version 1.9.4

of the submitted password against the hashed value of the password stored in the user’s record. If the two
hashed values match, then the submitted password is valid, and we can authenticate the user.

We hash passwords so that it is impossible to decrypt and use them to authenticate in the application. If
we stored passwords foolishly in clear text, then anyone with access to the database could retrieve any
password to authenticate as any user.

In a production system, user and group data will most often be saved and come from a database, but here
we use ”dummy” data to represent user and groups sources.

Add an ACL

Open tutorial/models.py and add the following import statement near the top:

4 from pyramid.security import (


5 Allow,
6 Everyone,
7 )
8

Add the following lines to the Wiki class:

9 class Wiki(PersistentMapping):
10 __name__ = None
11 __parent__ = None
12 __acl__ = [ (Allow, Everyone, 'view'),
13 (Allow, 'group:editors', 'edit') ]

We import Allow, an action that means that permission is allowed, and Everyone, a special principal
that is associated to all requests. Both are used in the ACE entries that make up the ACL.

The ACL is a list that needs to be named __acl__ and be an attribute of a class. We define an ACL
with two ACE entries: the first entry allows any user the view permission. The second entry allows the
group:editors principal the edit permission.

The Wiki class that contains the ACL is the resource constructor for the root resource, which is a Wiki
instance. The ACL is provided to each view in the context of the request as the context attribute.

It’s only happenstance that we’re assigning this ACL at class scope. An ACL can be attached to an object
instance too; this is how ”row level security” can be achieved in Pyramid applications. We actually need
only one ACL for the entire system, however, because our security requirements are simple, so this feature
is not demonstrated. See Assigning ACLs to Your Resource Objects for more information about what an
ACL represents.

298 Contents
The Pyramid Web Framework, Version 1.9.4

Add authentication and authorization policies

Open tutorial/__init__.py and add the highlighted import statements:

1 from pyramid.config import Configurator


2 from pyramid_zodbconn import get_connection
3

4 from pyramid.authentication import AuthTktAuthenticationPolicy


5 from pyramid.authorization import ACLAuthorizationPolicy
6

7 from .models import appmaker


8 from .security import groupfinder

Now add those policies to the configuration:

18 settings['tm.manager_hook'] = 'pyramid_tm.explicit_manager'
19 authn_policy = AuthTktAuthenticationPolicy(
20 'sosecret', callback=groupfinder, hashalg='sha512')
21 authz_policy = ACLAuthorizationPolicy()
22 with Configurator(settings=settings) as config:
23 config.set_authentication_policy(authn_policy)
24 config.set_authorization_policy(authz_policy)
25 config.include('pyramid_chameleon')

Only the highlighted lines need to be added.

We are enabling an AuthTktAuthenticationPolicy, which is based in an auth ticket that may be


included in the request. We are also enabling an ACLAuthorizationPolicy, which uses an ACL to
determine the allow or deny outcome for a view.

Note that the pyramid.authentication.AuthTktAuthenticationPolicy constructor ac-


cepts two arguments: secret and callback. secret is a string representing an encryption key used
by the ”authentication ticket” machinery represented by this policy: it is required. The callback is the
groupfinder() function that we created before.

Add permission declarations

Open tutorial/views.py and add a permission='edit' parameter to the @view_config


decorators for add_page() and edit_page():

0.2. Tutorials 299


The Pyramid Web Framework, Version 1.9.4

@view_config(name='add_page', context='.models.Wiki',
renderer='templates/edit.pt',
permission='edit')

@view_config(name='edit_page', context='.models.Page',
renderer='templates/edit.pt',
permission='edit')

Only the highlighted lines, along with their preceding commas, need to be edited and added.
The result is that only users who possess the edit permission at the time of the request may invoke those
two views.
Add a permission='view' parameter to the @view_config decorator for view_wiki() and
view_page() as follows:

@view_config(context='.models.Wiki',
permission='view')

@view_config(context='.models.Page', renderer='templates/view.pt',
permission='view')

Only the highlighted lines, along with their preceding commas, need to be edited and added.
This allows anyone to invoke these two views.
We are done with the changes needed to control access. The changes that follow will add the login and
logout feature.

Login, logout

Add login and logout views

We’ll add a login view which renders a login form and processes the post from the login form, checking
credentials.
We’ll also add a logout view callable to our application and provide a link to it. This view will clear the
credentials of the logged in user and redirect back to the front page.
Add the following import statements to the head of tutorial/views.py:

300 Contents
The Pyramid Web Framework, Version 1.9.4

from pyramid.view import (


view_config,
forbidden_view_config,
)

from pyramid.security import (


remember,
forget,
)

from .security import USERS, check_password

All the highlighted lines need to be added or edited.

forbidden_view_config() will be used to customize the default 403 Forbidden page.


remember() and forget() help to create and expire an auth ticket cookie.

Now add the login and logout views at the end of the file:

80 @view_config(context='.models.Wiki', name='login',
81 renderer='templates/login.pt')
82 @forbidden_view_config(renderer='templates/login.pt')
83 def login(request):
84 login_url = request.resource_url(request.context, 'login')
85 referrer = request.url
86 if referrer == login_url:
87 referrer = '/' # never use the login form itself as came_
,→from

88 came_from = request.params.get('came_from', referrer)


89 message = ''
90 login = ''
91 password = ''
92 if 'form.submitted' in request.params:
93 login = request.params['login']
94 password = request.params['password']
95 if check_password(USERS.get(login), password):
96 headers = remember(request, login)
97 return HTTPFound(location=came_from,
98 headers=headers)
99 message = 'Failed login'
(continues on next page)

0.2. Tutorials 301


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


100

101 return dict(


102 message=message,
103 url=request.application_url + '/login',
104 came_from=came_from,
105 login=login,
106 password=password,
107 )
108

109

110 @view_config(context='.models.Wiki', name='logout')


111 def logout(request):
112 headers = forget(request)
113 return HTTPFound(location=request.resource_url(request.context),
114 headers=headers)

login() has two decorators:

• a @view_config decorator which associates it with the login route and makes it visible when
we visit /login,

• a @forbidden_view_config decorator which turns it into a forbidden view. login() will be


invoked when a user tries to execute a view callable for which they lack authorization. For example,
if a user has not logged in and tries to add or edit a Wiki page, they will be shown the login form
before being allowed to continue.

The order of these two view configuration decorators is unimportant.

logout() is decorated with a @view_config decorator which associates it with the logout route.
It will be invoked when we visit /logout.

Add the login.pt Template

Create tutorial/templates/login.pt with the following content:

302 Contents
The Pyramid Web Framework, Version 1.9.4

<!DOCTYPE html>
<html lang="${request.locale_name}">
<head>
<meta charset="utf-8">
<meta http-equiv="X-UA-Compatible" content="IE=edge">
<meta name="viewport" content="width=device-width, initial-
,→scale=1.0">

<meta name="description" content="pyramid web application">


<meta name="author" content="Pylons Project">
<link rel="shortcut icon" href="${request.static_url(
,→'tutorial:static/pyramid-16x16.png')}">

<title>Login - Pyramid tutorial wiki (based on


TurboGears 20-Minute Wiki)</title>

<!-- Bootstrap core CSS -->


<link href="//oss.maxcdn.com/libs/twitter-bootstrap/3.0.3/css/
,→bootstrap.min.css" rel="stylesheet">

<!-- Custom styles for this scaffold -->


<link href="${request.static_url('tutorial:static/theme.css')}"␣
,→rel="stylesheet">

<!-- HTML5 shim and Respond.js IE8 support of HTML5 elements␣


,→and media queries -->
<!--[if lt IE 9]>
<script src="//oss.maxcdn.com/libs/html5shiv/3.7.0/html5shiv.
,→js" integrity="sha384-
,→0s5Pv64cNZJieYFkXYOTId2HMA2Lfb6q2nAcx2n0RTLUnCAoTTsS0nKEO27XyKcY"␣

,→crossorigin="anonymous"></script>

<script src="//oss.maxcdn.com/libs/respond.js/1.3.0/respond.
,→min.js" integrity="sha384-f1r2UzjsxZ9T4V1f2zBO/
,→evUqSEOpeaUUZcMTz1Up63bl4ruYnFYeM+BxI4NhyI0" crossorigin=

,→"anonymous"></script>

<![endif]-->
</head>

<body>

<div class="starter-template">
<div class="container">
<div class="row">
<div class="col-md-2">
(continues on next page)

0.2. Tutorials 303


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


<img class="logo img-responsive" src="${request.static_
,→url('tutorial:static/pyramid.png')}" alt="pyramid web framework">

</div>
<div class="col-md-10">
<div class="content">
<p>
<strong>
Login
</strong><br>
<span tal:replace="message"></span>
</p>
<form action="${url}" method="post">
<input type="hidden" name="came_from" value="${came_
,→from}">

<div class="form-group">
<label for="login">Username</label>
<input type="text" name="login" value="${login}">
</div>
<div class="form-group">
<label for="password">Password</label>
<input type="password" name="password" value="$
,→{password}">

</div>
<div class="form-group">
<button type="submit" name="form.submitted" value=
,→"Log In" class="btn btn-default">Log In</button>

</div>
</form>
</div>
</div>
</div>
<div class="row">
<div class="copyright">
Copyright &copy; Pylons Project
</div>
</div>
</div>
</div>

<!-- Bootstrap core JavaScript


(continues on next page)

304 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


================================================== -->
<!-- Placed at the end of the document so the pages load faster␣
,→-->

<script src="//oss.maxcdn.com/libs/jquery/1.10.2/jquery.min.js"␣
,→integrity="sha384-
,→aBL3Lzi6c9LNDGvpHkZrrm3ZVsIwohDD7CDozL0pk8FwCrfmV7H9w8j3L7ikEv6h"␣

,→crossorigin="anonymous"></script>

<script src="//oss.maxcdn.com/libs/twitter-bootstrap/3.0.3/js/
,→bootstrap.min.js" integrity="sha384-s1ITto93iSMDxlp/
,→79qhWHi+LsIi9Gx6yL+cOKDuymvihkfol83TYbLbOw+W/wv4" crossorigin=

,→"anonymous"></script>

</body>
</html>

The above template is referenced in the login view that we just added in views.py.

Return a logged_in flag to the renderer

Open tutorial/views.py again. Add a logged_in parameter to the return value of


view_page(), add_page(), and edit_page() as follows:

return dict(page=context, content=content, edit_url=edit_url,


logged_in=request.authenticated_userid)

return dict(page=page, save_url=save_url,


logged_in=request.authenticated_userid)

return dict(page=context,
save_url=request.resource_url(context, 'edit_page'),
logged_in=request.authenticated_userid)

Only the highlighted lines need to be added or edited.

The pyramid.request.Request.authenticated_userid() will be None if the user is not


authenticated, or a userid if the user is authenticated.

0.2. Tutorials 305


The Pyramid Web Framework, Version 1.9.4

Add a ”Logout” link when logged in

Open tutorial/templates/edit.pt and tutorial/templates/view.pt and add the fol-


lowing code as indicated by the highlighted lines.

<div class="col-md-10">
<div class="content">
<p tal:condition="logged_in" class="pull-right">
<a href="${request.application_url}/logout">Logout</
a>
,→

</p>

The attribute tal:condition="logged_in" will make the element be included when logged_in
is any user id. The link will invoke the logout view. The above element will not be included if logged_in
is None, such as when a user is not authenticated.

Reviewing our changes

Our tutorial/__init__.py will look like this when we’re done:

1 from pyramid.config import Configurator


2 from pyramid_zodbconn import get_connection
3

4 from pyramid.authentication import AuthTktAuthenticationPolicy


5 from pyramid.authorization import ACLAuthorizationPolicy
6

7 from .models import appmaker


8 from .security import groupfinder
9

10 def root_factory(request):
11 conn = get_connection(request)
12 return appmaker(conn.root())
13

14

15 def main(global_config, **settings):


16 """ This function returns a Pyramid WSGI application.
17 """
18 settings['tm.manager_hook'] = 'pyramid_tm.explicit_manager'
19 authn_policy = AuthTktAuthenticationPolicy(
(continues on next page)

306 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


20 'sosecret', callback=groupfinder, hashalg='sha512')
21 authz_policy = ACLAuthorizationPolicy()
22 with Configurator(settings=settings) as config:
23 config.set_authentication_policy(authn_policy)
24 config.set_authorization_policy(authz_policy)
25 config.include('pyramid_chameleon')
26 config.include('pyramid_tm')
27 config.include('pyramid_retry')
28 config.include('pyramid_zodbconn')
29 config.set_root_factory(root_factory)
30 config.add_static_view('static', 'static', cache_max_
,→age=3600)

31 config.scan()
32 return config.make_wsgi_app()

Only the highlighted lines need to be added or edited.

Our tutorial/models.py will look like this when we’re done:

1 from persistent import Persistent


2 from persistent.mapping import PersistentMapping
3

4 from pyramid.security import (


5 Allow,
6 Everyone,
7 )
8

9 class Wiki(PersistentMapping):
10 __name__ = None
11 __parent__ = None
12 __acl__ = [ (Allow, Everyone, 'view'),
13 (Allow, 'group:editors', 'edit') ]
14

15 class Page(Persistent):
16 def __init__(self, data):
17 self.data = data
18

19 def appmaker(zodb_root):
20 if 'app_root' not in zodb_root:
21 app_root = Wiki()
22 frontpage = Page('This is the front page')
(continues on next page)

0.2. Tutorials 307


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


23 app_root['FrontPage'] = frontpage
24 frontpage.__name__ = 'FrontPage'
25 frontpage.__parent__ = app_root
26 zodb_root['app_root'] = app_root
27 return zodb_root['app_root']

Only the highlighted lines need to be added or edited.

Our tutorial/views.py will look like this when we’re done:

1 from docutils.core import publish_parts


2 import re
3

4 from pyramid.httpexceptions import HTTPFound


5

6 from pyramid.view import (


7 view_config,
8 forbidden_view_config,
9 )
10

11 from pyramid.security import (


12 remember,
13 forget,
14 )
15

16

17 from .security import USERS, check_password


18 from .models import Page
19

20 # regular expression used to find WikiWords


21 wikiwords = re.compile(r"\b([A-Z]\w+[A-Z]+\w+)")
22

23 @view_config(context='.models.Wiki',
24 permission='view')
25 def view_wiki(context, request):
26 return HTTPFound(location=request.resource_url(context,
,→'FrontPage'))

27

28 @view_config(context='.models.Page', renderer='templates/view.pt',
29 permission='view')
30 def view_page(context, request):
(continues on next page)

308 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


31 wiki = context.__parent__
32

33 def check(match):
34 word = match.group(1)
35 if word in wiki:
36 page = wiki[word]
37 view_url = request.resource_url(page)
38 return '<a href="%s">%s</a>' % (view_url, word)
39 else:
40 add_url = request.application_url + '/add_page/' + word
41 return '<a href="%s">%s</a>' % (add_url, word)
42

43 content = publish_parts(context.data, writer_name='html')['html_


,→ body']
44 content = wikiwords.sub(check, content)
45 edit_url = request.resource_url(context, 'edit_page')
46 return dict(page=context, content=content, edit_url=edit_url,
47 logged_in=request.authenticated_userid)
48

49 @view_config(name='add_page', context='.models.Wiki',
50 renderer='templates/edit.pt',
51 permission='edit')
52 def add_page(context, request):
53 pagename = request.subpath[0]
54 if 'form.submitted' in request.params:
55 body = request.params['body']
56 page = Page(body)
57 page.__name__ = pagename
58 page.__parent__ = context
59 context[pagename] = page
60 return HTTPFound(location=request.resource_url(page))
61 save_url = request.resource_url(context, 'add_page', pagename)
62 page = Page('')
63 page.__name__ = pagename
64 page.__parent__ = context
65 return dict(page=page, save_url=save_url,
66 logged_in=request.authenticated_userid)
67

68 @view_config(name='edit_page', context='.models.Page',
69 renderer='templates/edit.pt',
70 permission='edit')
(continues on next page)

0.2. Tutorials 309


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


71 def edit_page(context, request):
72 if 'form.submitted' in request.params:
73 context.data = request.params['body']
74 return HTTPFound(location=request.resource_url(context))
75

76 return dict(page=context,
77 save_url=request.resource_url(context, 'edit_page'),
78 logged_in=request.authenticated_userid)
79

80 @view_config(context='.models.Wiki', name='login',
81 renderer='templates/login.pt')
82 @forbidden_view_config(renderer='templates/login.pt')
83 def login(request):
84 login_url = request.resource_url(request.context, 'login')
85 referrer = request.url
86 if referrer == login_url:
87 referrer = '/' # never use the login form itself as came_
,→from

88 came_from = request.params.get('came_from', referrer)


89 message = ''
90 login = ''
91 password = ''
92 if 'form.submitted' in request.params:
93 login = request.params['login']
94 password = request.params['password']
95 if check_password(USERS.get(login), password):
96 headers = remember(request, login)
97 return HTTPFound(location=came_from,
98 headers=headers)
99 message = 'Failed login'
100

101 return dict(


102 message=message,
103 url=request.application_url + '/login',
104 came_from=came_from,
105 login=login,
106 password=password,
107 )
108

109

110 @view_config(context='.models.Wiki', name='logout')


(continues on next page)

310 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


111 def logout(request):
112 headers = forget(request)
113 return HTTPFound(location=request.resource_url(request.context),
114 headers=headers)

Only the highlighted lines need to be added or edited.


Our tutorial/templates/edit.pt template will look like this when we’re done:

1 <!DOCTYPE html>
2 <html lang="${request.locale_name}">
3 <head>
4 <meta charset="utf-8">
5 <meta http-equiv="X-UA-Compatible" content="IE=edge">
6 <meta name="viewport" content="width=device-width, initial-
,→scale=1.0">

7 <meta name="description" content="pyramid web application">


8 <meta name="author" content="Pylons Project">
9 <link rel="shortcut icon" href="${request.static_url(
,→'tutorial:static/pyramid-16x16.png')}">

10

11 <title>${page.__name__} - Pyramid tutorial wiki (based on


12 TurboGears 20-Minute Wiki)</title>
13

14 <!-- Bootstrap core CSS -->


15 <link href="//oss.maxcdn.com/libs/twitter-bootstrap/3.0.3/css/
,→bootstrap.min.css" rel="stylesheet">

16

17 <!-- Custom styles for this scaffold -->


18 <link href="${request.static_url('tutorial:static/theme.css')}"␣
,→rel="stylesheet">

19

20 <!-- HTML5 shim and Respond.js IE8 support of HTML5 elements␣


,→and media queries -->
21 <!--[if lt IE 9]>
22 <script src="//oss.maxcdn.com/libs/html5shiv/3.7.0/html5shiv.
,→js" integrity="sha384-
,→0s5Pv64cNZJieYFkXYOTId2HMA2Lfb6q2nAcx2n0RTLUnCAoTTsS0nKEO27XyKcY"␣

,→crossorigin="anonymous"></script>

23 <script src="//oss.maxcdn.com/libs/respond.js/1.3.0/respond.
,→min.js" integrity="sha384-f1r2UzjsxZ9T4V1f2zBO/
,→evUqSEOpeaUUZcMTz1Up63bl4ruYnFYeM+BxI4NhyI0" crossorigin=

,→"anonymous"></script>
(continues on next page)

0.2. Tutorials 311


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


24 <![endif]-->
25 </head>
26

27 <body>
28

29 <div class="starter-template">
30 <div class="container">
31 <div class="row">
32 <div class="col-md-2">
33 <img class="logo img-responsive" src="${request.static_
,→url('tutorial:static/pyramid.png')}" alt="pyramid web framework">

34 </div>
35 <div class="col-md-10">
36 <div class="content">
37 <p tal:condition="logged_in" class="pull-right">
38 <a href="${request.application_url}/logout">Logout</
,→a>

39 </p>
40 <p>
41 Editing <strong><span tal:replace="page.__name__">
42 Page Name Goes Here</span></strong>
43 </p>
44 <p>You can return to the
45 <a href="${request.application_url}">FrontPage</a>.
46 </p>
47 <form action="${save_url}" method="post">
48 <div class="form-group">
49 <textarea class="form-control" name="body"␣
,→tal:content="page.data" rows="10" cols="60"></textarea>

50 </div>
51 <div class="form-group">
52 <button type="submit" name="form.submitted" value=
,→"Save" class="btn btn-default">Save</button>

53 </div>
54 </form>
55 </div>
56 </div>
57 </div>
58 <div class="row">
59 <div class="copyright">
60 Copyright &copy; Pylons Project
(continues on next page)

312 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


61 </div>
62 </div>
63 </div>
64 </div>
65

66

67 <!-- Bootstrap core JavaScript


68 ================================================== -->
69 <!-- Placed at the end of the document so the pages load faster␣
,→-->

70 <script src="//oss.maxcdn.com/libs/jquery/1.10.2/jquery.min.js"␣
,→integrity="sha384-
,→aBL3Lzi6c9LNDGvpHkZrrm3ZVsIwohDD7CDozL0pk8FwCrfmV7H9w8j3L7ikEv6h"␣

,→crossorigin="anonymous"></script>

71 <script src="//oss.maxcdn.com/libs/twitter-bootstrap/3.0.3/js/
,→bootstrap.min.js" integrity="sha384-s1ITto93iSMDxlp/
,→79qhWHi+LsIi9Gx6yL+cOKDuymvihkfol83TYbLbOw+W/wv4" crossorigin=

,→"anonymous"></script>

72 </body>
73 </html>

Only the highlighted lines need to be added or edited.


Our tutorial/templates/view.pt template will look like this when we’re done:

1 <!DOCTYPE html>
2 <html lang="${request.locale_name}">
3 <head>
4 <meta charset="utf-8">
5 <meta http-equiv="X-UA-Compatible" content="IE=edge">
6 <meta name="viewport" content="width=device-width, initial-
,→scale=1.0">

7 <meta name="description" content="pyramid web application">


8 <meta name="author" content="Pylons Project">
9 <link rel="shortcut icon" href="${request.static_url(
,→'tutorial:static/pyramid-16x16.png')}">

10

11 <title>${page.__name__} - Pyramid tutorial wiki (based on


12 TurboGears 20-Minute Wiki)</title>
13

14 <!-- Bootstrap core CSS -->


15 <link href="//oss.maxcdn.com/libs/twitter-bootstrap/3.0.3/css/
,→bootstrap.min.css" rel="stylesheet">
(continues on next page)

0.2. Tutorials 313


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


16

17 <!-- Custom styles for this scaffold -->


18 <link href="${request.static_url('tutorial:static/theme.css')}"␣
,→rel="stylesheet">

19

20 <!-- HTML5 shim and Respond.js IE8 support of HTML5 elements␣


,→and media queries -->
21 <!--[if lt IE 9]>
22 <script src="//oss.maxcdn.com/libs/html5shiv/3.7.0/html5shiv.
,→js" integrity="sha384-
,→0s5Pv64cNZJieYFkXYOTId2HMA2Lfb6q2nAcx2n0RTLUnCAoTTsS0nKEO27XyKcY"␣

,→crossorigin="anonymous"></script>

23 <script src="//oss.maxcdn.com/libs/respond.js/1.3.0/respond.
,→min.js" integrity="sha384-f1r2UzjsxZ9T4V1f2zBO/
,→evUqSEOpeaUUZcMTz1Up63bl4ruYnFYeM+BxI4NhyI0" crossorigin=

,→"anonymous"></script>

24 <![endif]-->
25 </head>
26

27 <body>
28

29 <div class="starter-template">
30 <div class="container">
31 <div class="row">
32 <div class="col-md-2">
33 <img class="logo img-responsive" src="${request.static_
,→url('tutorial:static/pyramid.png')}" alt="pyramid web framework">

34 </div>
35 <div class="col-md-10">
36 <div class="content">
37 <p tal:condition="logged_in" class="pull-right">
38 <a href="${request.application_url}/logout">Logout</
,→a>

39 </p>
40 <div tal:replace="structure content">
41 Page text goes here.
42 </div>
43 <p>
44 <a tal:attributes="href edit_url" href="">
45 Edit this page
46 </a>
47 </p>

(continues on next page)

314 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


48 <p>
49 Viewing <strong><span tal:replace="page.__name__">
50 Page Name Goes Here</span></strong>
51 </p>
52 <p>You can return to the
53 <a href="${request.application_url}">FrontPage</a>.
54 </p>
55 </div>
56 </div>
57 </div>
58 <div class="row">
59 <div class="copyright">
60 Copyright &copy; Pylons Project
61 </div>
62 </div>
63 </div>
64 </div>
65

66

67 <!-- Bootstrap core JavaScript


68 ================================================== -->
69 <!-- Placed at the end of the document so the pages load faster␣
,→-->

70 <script src="//oss.maxcdn.com/libs/jquery/1.10.2/jquery.min.js"␣
,→integrity="sha384-
,→aBL3Lzi6c9LNDGvpHkZrrm3ZVsIwohDD7CDozL0pk8FwCrfmV7H9w8j3L7ikEv6h"␣

,→crossorigin="anonymous"></script>

71 <script src="//oss.maxcdn.com/libs/twitter-bootstrap/3.0.3/js/
,→bootstrap.min.js" integrity="sha384-s1ITto93iSMDxlp/
,→79qhWHi+LsIi9Gx6yL+cOKDuymvihkfol83TYbLbOw+W/wv4" crossorigin=

,→"anonymous"></script>

72 </body>
73 </html>

Only the highlighted lines need to be added or edited.

Viewing the application in a browser

We can finally examine our application in a browser (See Start the application). Launch a browser and
visit each of the following URLs, checking that the result is as expected:

0.2. Tutorials 315


The Pyramid Web Framework, Version 1.9.4

• http://localhost:6543/ invokes the view_wiki view. This always redirects to the view_page
view of the FrontPage Page resource. It is executable by any user.

• http://localhost:6543/FrontPage invokes the view_page view of the FrontPage Page resource.


This is because it’s the default view (a view without a name) for Page resources. It is executable
by any user.

• http://localhost:6543/FrontPage/edit_page invokes the edit view for the FrontPage object. It is ex-
ecutable by only the editor user. If a different user (or the anonymous user) invokes it, a login
form will be displayed. Supplying the credentials with the username editor, password editor
will display the edit page form.

• http://localhost:6543/add_page/SomePageName invokes the add view for a page. It is executable by


only the editor user. If a different user (or the anonymous user) invokes it, a login form will be
displayed. Supplying the credentials with the username editor, password editor will display
the edit page form.

• After logging in (as a result of hitting an edit or add page and submitting the login form with the
editor credentials), we’ll see a Logout link in the upper right hand corner. When we click it, we’re
logged out, and redirected back to the front page.

Adding Tests

We will now add tests for the models and the views and a few functional tests in tests.py. Tests ensure
that an application works, and that it continues to work when changes are made in the future.

Test the models

We write tests for the model classes and the appmaker. Changing tests.py, we’ll write a separate
test class for each model class, and we’ll write a test class for the appmaker.

To do so, we’ll retain the tutorial.tests.ViewTests class that was generated as part of the zodb
cookiecutter. We’ll add three test classes: one for the Page model named PageModelTests, one for
the Wiki model named WikiModelTests, and one for the appmaker named AppmakerTests.

Test the views

We’ll modify our tests.py file, adding tests for each view function we added previously. As a re-
sult, we’ll delete the ViewTests class that the zodb cookiecutter provided, and add four other test
classes: ViewWikiTests, ViewPageTests, AddPageTests, and EditPageTests. These test
the view_wiki, view_page, add_page, and edit_page views.

316 Contents
The Pyramid Web Framework, Version 1.9.4

Functional tests

We’ll test the whole application, covering security aspects that are not tested in the unit tests, like logging
in, logging out, checking that the viewer user cannot add or edit pages, but the editor user can, and
so on.

View the results of all our edits to tests.py

Open the tutorial/tests.py module, and edit it such that it appears as follows:

1 import unittest
2

3 from pyramid import testing


4

5 class PageModelTests(unittest.TestCase):
6

7 def _getTargetClass(self):
8 from .models import Page
9 return Page
10

11 def _makeOne(self, data=u'some data'):


12 return self._getTargetClass()(data=data)
13

14 def test_constructor(self):
15 instance = self._makeOne()
16 self.assertEqual(instance.data, u'some data')
17

18 class WikiModelTests(unittest.TestCase):
19

20 def _getTargetClass(self):
21 from .models import Wiki
22 return Wiki
23

24 def _makeOne(self):
25 return self._getTargetClass()()
26

27 def test_it(self):
28 wiki = self._makeOne()
29 self.assertEqual(wiki.__parent__, None)
30 self.assertEqual(wiki.__name__, None)
(continues on next page)

0.2. Tutorials 317


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


31

32 class AppmakerTests(unittest.TestCase):
33

34 def _callFUT(self, zodb_root):


35 from .models import appmaker
36 return appmaker(zodb_root)
37

38 def test_it(self):
39 root = {}
40 self._callFUT(root)
41 self.assertEqual(root['app_root']['FrontPage'].data,
42 'This is the front page')
43

44 class ViewWikiTests(unittest.TestCase):
45 def test_it(self):
46 from .views import view_wiki
47 context = testing.DummyResource()
48 request = testing.DummyRequest()
49 response = view_wiki(context, request)
50 self.assertEqual(response.location, 'http://example.com/
,→FrontPage')

51

52 class ViewPageTests(unittest.TestCase):
53 def _callFUT(self, context, request):
54 from .views import view_page
55 return view_page(context, request)
56

57 def test_it(self):
58 wiki = testing.DummyResource()
59 wiki['IDoExist'] = testing.DummyResource()
60 context = testing.DummyResource(data='Hello CruelWorld␣
,→IDoExist')

61 context.__parent__ = wiki
62 context.__name__ = 'thepage'
63 request = testing.DummyRequest()
64 info = self._callFUT(context, request)
65 self.assertEqual(info['page'], context)
66 self.assertEqual(
67 info['content'],
68 '<div class="document">\n'
69 '<p>Hello <a href="http://example.com/add_page/
,→CruelWorld">'
(continues on next page)

318 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


70 'CruelWorld</a> '
71 '<a href="http://example.com/IDoExist/">'
72 'IDoExist</a>'
73 '</p>\n</div>\n')
74 self.assertEqual(info['edit_url'],
75 'http://example.com/thepage/edit_page')
76

77

78 class AddPageTests(unittest.TestCase):
79 def _callFUT(self, context, request):
80 from .views import add_page
81 return add_page(context, request)
82

83 def test_it_notsubmitted(self):
84 context = testing.DummyResource()
85 request = testing.DummyRequest()
86 request.subpath = ['AnotherPage']
87 info = self._callFUT(context, request)
88 self.assertEqual(info['page'].data,'')
89 self.assertEqual(
90 info['save_url'],
91 request.resource_url(context, 'add_page', 'AnotherPage
,→'))

92

93 def test_it_submitted(self):
94 context = testing.DummyResource()
95 request = testing.DummyRequest({'form.submitted':True,
96 'body':'Hello yo!'})
97 request.subpath = ['AnotherPage']
98 self._callFUT(context, request)
99 page = context['AnotherPage']
100 self.assertEqual(page.data, 'Hello yo!')
101 self.assertEqual(page.__name__, 'AnotherPage')
102 self.assertEqual(page.__parent__, context)
103

104 class EditPageTests(unittest.TestCase):


105 def _callFUT(self, context, request):
106 from .views import edit_page
107 return edit_page(context, request)
108

109 def test_it_notsubmitted(self):


(continues on next page)

0.2. Tutorials 319


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


110 context = testing.DummyResource()
111 request = testing.DummyRequest()
112 info = self._callFUT(context, request)
113 self.assertEqual(info['page'], context)
114 self.assertEqual(info['save_url'],
115 request.resource_url(context, 'edit_page'))
116

117 def test_it_submitted(self):


118 context = testing.DummyResource()
119 request = testing.DummyRequest({'form.submitted':True,
120 'body':'Hello yo!'})
121 response = self._callFUT(context, request)
122 self.assertEqual(response.location, 'http://example.com/')
123 self.assertEqual(context.data, 'Hello yo!')
124

125 class SecurityTests(unittest.TestCase):


126 def test_hashing(self):
127 from .security import hash_password, check_password
128 password = 'secretpassword'
129 hashed_password = hash_password(password)
130 self.assertTrue(check_password(hashed_password, password))
131

132 self.assertFalse(check_password(hashed_password,
'attackerpassword'))
,→

133

134 self.assertFalse(check_password(None, password))


135

136 class FunctionalTests(unittest.TestCase):


137

138 viewer_login = '/login?login=viewer&password=viewer' \


139 '&came_from=FrontPage&form.submitted=Login'
140 viewer_wrong_login = '/login?login=viewer&password=incorrect' \
141 '&came_from=FrontPage&form.submitted=Login'
142 editor_login = '/login?login=editor&password=editor' \
143 '&came_from=FrontPage&form.submitted=Login'
144

145 def setUp(self):


146 import tempfile
147 import os.path
148 from . import main
149 self.tmpdir = tempfile.mkdtemp()
(continues on next page)

320 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


150

151 dbpath = os.path.join( self.tmpdir, 'test.db')


152 uri = 'file://' + dbpath
153 settings = { 'zodbconn.uri' : uri ,
154 'pyramid.includes': ['pyramid_zodbconn',
,→'pyramid_tm'] }

155

156 app = main({}, **settings)


157 self.db = app.registry._zodb_databases['']
158 from webtest import TestApp
159 self.testapp = TestApp(app)
160

161 def tearDown(self):


162 import shutil
163 self.db.close()
164 shutil.rmtree( self.tmpdir )
165

166 def test_root(self):


167 res = self.testapp.get('/', status=302)
168 self.assertEqual(res.location, 'http://localhost/FrontPage')
169

170 def test_FrontPage(self):


171 res = self.testapp.get('/FrontPage', status=200)
172 self.assertTrue(b'FrontPage' in res.body)
173

174 def test_unexisting_page(self):


175 res = self.testapp.get('/SomePage', status=404)
176 self.assertTrue(b'Not Found' in res.body)
177

178 def test_referrer_is_login(self):


179 res = self.testapp.get('/login', status=200)
180 self.assertTrue(b'name="came_from" value="/"' in res.body)
181

182 def test_successful_log_in(self):


183 res = self.testapp.get( self.viewer_login, status=302)
184 self.assertEqual(res.location, 'http://localhost/FrontPage')
185

186 def test_failed_log_in(self):


187 res = self.testapp.get( self.viewer_wrong_login, status=200)
188 self.assertTrue(b'login' in res.body)
189

(continues on next page)

0.2. Tutorials 321


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


190 def test_logout_link_present_when_logged_in(self):
191 res = self.testapp.get( self.viewer_login, status=302)
192 res = self.testapp.get('/FrontPage', status=200)
193 self.assertTrue(b'Logout' in res.body)
194

195 def test_logout_link_not_present_after_logged_out(self):


196 res = self.testapp.get( self.viewer_login, status=302)
197 res = self.testapp.get('/FrontPage', status=200)
198 res = self.testapp.get('/logout', status=302)
199 self.assertTrue(b'Logout' not in res.body)
200

201 def test_anonymous_user_cannot_edit(self):


202 res = self.testapp.get('/FrontPage/edit_page', status=200)
203 self.assertTrue(b'Login' in res.body)
204

205 def test_anonymous_user_cannot_add(self):


206 res = self.testapp.get('/add_page/NewPage', status=200)
207 self.assertTrue(b'Login' in res.body)
208

209 def test_viewer_user_cannot_edit(self):


210 res = self.testapp.get( self.viewer_login, status=302)
211 res = self.testapp.get('/FrontPage/edit_page', status=200)
212 self.assertTrue(b'Login' in res.body)
213

214 def test_viewer_user_cannot_add(self):


215 res = self.testapp.get( self.viewer_login, status=302)
216 res = self.testapp.get('/add_page/NewPage', status=200)
217 self.assertTrue(b'Login' in res.body)
218

219 def test_editors_member_user_can_edit(self):


220 res = self.testapp.get( self.editor_login, status=302)
221 res = self.testapp.get('/FrontPage/edit_page', status=200)
222 self.assertTrue(b'Editing' in res.body)
223

224 def test_editors_member_user_can_add(self):


225 res = self.testapp.get( self.editor_login, status=302)
226 res = self.testapp.get('/add_page/NewPage', status=200)
227 self.assertTrue(b'Editing' in res.body)
228

229 def test_editors_member_user_can_view(self):


230 res = self.testapp.get( self.editor_login, status=302)
(continues on next page)

322 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


231 res = self.testapp.get('/FrontPage', status=200)
232 self.assertTrue(b'FrontPage' in res.body)

Running the tests

We can run these tests by using py.test similarly to how we did in Run the tests. Courtesy of the
cookiecutter, our testing dependencies have already been satisfied and py.test and coverage have already
been configured, so we can jump right to running tests.

On UNIX:

$ $VENV/bin/py.test -q

On Windows:

c:\tutorial> %VENV%\Scripts\py.test -q

The expected result should look like the following:

.........................
25 passed in 6.87 seconds

Distributing Your Application

Once your application works properly, you can create a ”tarball” from it by using the setup.py sdist
command. The following commands assume your current working directory contains the tutorial
package and the setup.py file.

On UNIX:

$ $VENV/bin/python setup.py sdist

On Windows:

0.2. Tutorials 323


The Pyramid Web Framework, Version 1.9.4

c:\tutorial> %VENV%\Scripts\python setup.py sdist

The output of such a command will be something like:

running sdist
# more output
creating dist
Creating tar archive
removing 'tutorial-0.0' (and everything under it)

Note that this command creates a tarball in the ”dist” subdirectory named tutorial-0.0.tar.gz.
You can send this file to your friends to show them your cool new application. They should be able to
install it by pointing the pip install command directly at it. Or you can upload it to PyPI and share it
with the rest of the world, where it can be downloaded via pip install remotely like any other package
people download from PyPI.

0.2.5 Running a Pyramid Application under mod_wsgi

mod_wsgi is an Apache module developed by Graham Dumpleton. It allows WSGI programs to be served
using the Apache web server.
This guide will outline broad steps that can be used to get a Pyramid application running under Apache via
mod_wsgi. This particular tutorial was developed under Apple’s Mac OS X platform (Snow Leopard, on
a 32-bit Mac), but the instructions should be largely the same for all systems, delta specific path information
for commands and files.

Unfortunately these instructions almost certainly won’t work for deploying a Pyramid application on
a Windows system using mod_wsgi. If you have experience with Pyramid and mod_wsgi on Windows
systems, please help us document this experience by submitting documentation to the Pylons-devel maillist.

1. The tutorial assumes you have Apache already installed on your system. If you do not, install Apache
2.X for your platform in whatever manner makes sense.
2. It is also assumed that you have satisfied the Requirements for Installing Packages.
3. Once you have Apache installed, install mod_wsgi. Use the (excellent) installation instructions for
your platform into your system’s Apache installation.
4. Create a Pyramid application. For this tutorial we’ll use the starter cookiecutter. See Creating
a Pyramid Project for more in-depth information about creating a new project.

324 Contents
The Pyramid Web Framework, Version 1.9.4

$ cd ~
$ cookiecutter gh:Pylons/pyramid-cookiecutter-starter --
,→checkout 1.9-branch

If prompted for the first item, accept the default yes by hitting return.

You've cloned ~/.cookiecutters/pyramid-cookiecutter-starter␣


,→before.

Is it okay to delete and re-clone it? [yes]: yes


project_name [Pyramid Scaffold]: myproject
repo_name [myproject]: myproject
Select template_language:
1 - jinja2
2 - chameleon
3 - mako
Choose from 1, 2, 3 [1]: 1

5. Create a virtual environment which we’ll use to install our application. It is important to use the
same base Python interpreter that was used to build mod_wsgi. For example, if mod_wsgi was
built against the system Python 3.x, then your project should use a virtual environment created from
that same system Python 3.x.

$ cd myproject
$ python3 -m venv env

6. Install your Pyramid application and its dependencies.

$ env/bin/pip install -e .

7. Within the project directory (~/myproject), create a script named pyramid.wsgi. Give it
these contents:

from pyramid.paster import get_app, setup_logging


ini_path = '/Users/chrism/myproject/production.ini'
setup_logging(ini_path)
application = get_app(ini_path, 'main')

0.2. Tutorials 325


The Pyramid Web Framework, Version 1.9.4

The first argument to pyramid.paster.get_app() is the project configuration file name.


It’s best to use the production.ini file provided by your cookiecutter, as it contains settings
appropriate for production. The second is the name of the section within the .ini file that should
be loaded by mod_wsgi. The assignment to the name application is important: mod_wsgi
requires finding such an assignment when it opens the file.

The call to pyramid.paster.setup_logging() initializes the standard library’s logging


module to allow logging within your application. See Logging Configuration.

There is no need to make the pyramid.wsgi script executable. However, you’ll need to make sure
that two users have access to change into the ~/myproject directory: your current user (mine is
chrism and the user that Apache will run as often named apache or httpd). Make sure both of
these users can ”cd” into that directory.

8. Edit your Apache configuration and add some stuff. I happened to create a file named /etc/
apache2/other/modwsgi.conf on my own system while installing Apache, so this stuff went
in there.

# Use only 1 Python sub-interpreter. Multiple sub-interpreters


# play badly with C extensions. See
# http://stackoverflow.com/a/10558360/209039
WSGIApplicationGroup %{GLOBAL}
WSGIPassAuthorization On
WSGIDaemonProcess pyramid user=chrism group=staff threads=4 \
python-path=/Users/chrism/myproject/env/lib/python3.5/site-
,→packages

WSGIScriptAlias /myapp /Users/chrism/myproject/pyramid.wsgi

<Directory /Users/chrism/myproject>
WSGIProcessGroup pyramid
Require all granted
</Directory>

9. Restart Apache

$ sudo /usr/sbin/apachectl restart

10. Visit http://localhost/myapp in a browser. You should see the sample application rendered
in your browser.

mod_wsgi has many knobs and a great variety of deployment modes. This is just one representation of
how you might use it to serve up a Pyramid application. See the mod_wsgi configuration documentation
for more in-depth configuration information.

326 Contents
The Pyramid Web Framework, Version 1.9.4

0.3 Narrative Documentation

0.3.1 Pyramid Introduction

Pyramid is a Python web application framework. It is designed to make creating web applications easier.
It is open source.

What Is a Framework?

A framework provides capabilities that developers can enhance or extend. A web application framework
provides many of the common needs of building web applications allowing developers to concentrate
only on the parts that are specific to their application.

Every framework makes choices about how a particular problem should be solved. When developers
choose to use a framework, they cede control over the portions of their application that are provided
by the framework. It is possible to write a complete web application without any framework, by using
Python libraries. In practice, however, it is often more practical to use a framework, so long as your
chosen framework fits the requirements of your application.

Pyramid follows these design and engineering principles:

Simplicity Pyramid is designed to be easy to use. You can get started even if you don’t understand it all.
And when you’re ready to do more, Pyramid will be there for you.

Minimalism Out of the box, Pyramid provides only the core tools needed for nearly all web applications:
mapping URLs to code, security, and serving static assets (files like JavaScript and CSS). Additional
tools provide templating, database integration and more. But with Pyramid you can ”pay only for
what you eat”.

Documentation Pyramid is committed to comprehensive and up-to-date documentation.

Speed Pyramid is designed to be noticeably fast.

Reliability Pyramid is developed conservatively and tested exhaustively. Our motto is: ”If it ain’t tested,
it’s broke”.

Openness As with Python, the Pyramid software is distributed under a permissive open source license.

0.3. Narrative Documentation 327


The Pyramid Web Framework, Version 1.9.4

Why Pyramid?

In a world filled with web frameworks, why should you choose Pyramid?

Modern

Pyramid is fully compatible with Python 3. If you develop a Pyramid application today, you can rest
assured that you’ll be able to use the most modern features of your favorite language. And in the years to
come, you’ll continue to be working on a framework that is up-to-date and forward-looking.

Tested

Untested code is broken by design. The Pyramid community has a strong testing culture and our framework
reflects that. Every release of Pyramid has 100% statement coverage (as measured by coverage) and 95%
decision/condition coverage. (as measured by instrumental) It is automatically tested using Travis and
Jenkins on supported versions of Python after each commit to its GitHub repository. Official Pyramid
add-ons are held to a similar testing standard.
We still find bugs in Pyramid, but we’ve noticed we find a lot fewer of them while working on projects
with a solid testing regime.

Documented

The Pyramid documentation is comprehensive. We strive to keep our narrative documentation both com-
plete and friendly to newcomers. We also maintain the Pyramid Community Cookbook of recipes demon-
strating common scenarios you might face. Contributions in the form of improvements to our documenta-
tion are always appreciated. And we always welcome improvements to our official tutorials as well as new
contributions to our community maintained tutorials.

Supported

You can get help quickly with Pyramid. It’s our goal that no Pyramid question go unanswered. Whether
you ask a question on IRC, on the Pylons-discuss mailing list, or on StackOverflow, you’re likely to get a
reasonably prompt response.
Pyramid is also a welcoming, friendly space for newcomers. We don’t tolerate ”support trolls” or those
who enjoy berating fellow users in our support channels. We try to keep it well-lit and new-user-friendly.
See also:
See also our #pyramid IRC channel, our pylons-discuss mailing list, and support-and-development.

328 Contents
The Pyramid Web Framework, Version 1.9.4

What makes Pyramid unique

There are many tools available for web development. What would make someone want to use Pyramid
instead? What makes Pyramid unique?

With Pyramid you can write very small applications without needing to know a lot. And by learning a bit
more, you can write very large applications too. Pyramid will allow you to become productive quickly, and
will grow with you. It won’t hold you back when your application is small, and it won’t get in your way
when your application becomes large. Other application frameworks seem to fall into two non-overlapping
categories: those that support ”small apps” and those designed for ”big apps”.

We don’t believe you should have to make this choice. You can’t really know how large your application
will become. You certainly shouldn’t have to rewrite a small application in another framework when it
gets ”too big”. A well-designed framework should be able to be good at both. Pyramid is that kind of
framework.

Pyramid provides a set of features that are unique among Python web frameworks. Others may provide
some, but only Pyramid provides them all, in one place, fully documented, and à la carte without needing
to pay for the whole banquet.

Build single-file applications

You can write a Pyramid application that lives entirely in one Python file. Such an application is easy to
understand since everything is in one place. It is easy to deploy because you don’t need to know much
about Python packaging. Pyramid allows you to do almost everything that so-called microframeworks can
in very similar ways.

from wsgiref.simple_server import make_server


from pyramid.config import Configurator
from pyramid.response import Response

def hello_world(request):
return Response('Hello %(name)s!' % request.matchdict)

if __name__ == '__main__':
with Configurator() as config:
config.add_route('hello', '/hello/{name}')
config.add_view(hello_world, route_name='hello')
app = config.make_wsgi_app()
server = make_server('0.0.0.0', 8080, app)
server.serve_forever()

0.3. Narrative Documentation 329


The Pyramid Web Framework, Version 1.9.4

See also:

See also Creating Your First Pyramid Application.

Configure applications with decorators

Pyramid allows you to keep your configuration right next to your code. That way you don’t have to switch
files to see your configuration. For example:

from pyramid.view import view_config


from pyramid.response import Response

@view_config(route_name='fred')
def fred_view(request):
return Response('fred')

However, using Pyramid configuration decorators does not change your code. It remains easy to extend,
test, or reuse. You can test your code as if the decorators were not there. You can instruct the framework
to ignore some decorators. You can even use an imperative style to write your configuration, skipping
decorators entirely.

See also:

See also Adding View Configuration Using the @view_config Decorator.

Generate application URLs

Dynamic web applications produce URLs that can change depending on what you are viewing. Pyramid
provides flexible, consistent, easy to use tools for generating URLs. When you use these tools to write
your application, you can change your configuration without fear of breaking links in your web pages.

See also:

See also Generating Route URLs.

330 Contents
The Pyramid Web Framework, Version 1.9.4

Serve static assets

Web applications often require JavaScript, CSS, images and other so-called static assets. Pyramid provides
flexible tools for serving these kinds of files. You can serve them directly from Pyramid, or host them on
an external server or CDN (content delivery network). Either way, Pyramid can help you to generate URLs
so you can change where your files come from without changing any code.

See also:

See also Serving Static Assets.

Develop interactively

Pyramid can automatically detect changes you make to template files and code, so your changes are im-
mediately available in your browser. You can debug using plain old print() calls, which will display to
your console.

Pyramid has a debug toolbar that allows you to see information about how your application is working
right in your browser. See configuration, installed packages, SQL queries, logging statements and more.

When your application has an error, an interactive debugger allows you to poke around from your browser
to find out what happened.

To use the Pyramid debug toolbar, build your project with a Pyramid cookiecutter.

See also:

See also The Debug Toolbar.

Debug with power

When things go wrong, Pyramid gives you powerful ways to fix the problem.

You can configure Pyramid to print helpful information to the console. The debug_notfound setting
shows information about URLs that aren’t matched. The debug_authorization setting provides
helpful messages about why you aren’t allowed to do what you just tried.

Pyramid also has command line tools to help you verify your configuration. You can use proutes and
pviews to inspect how URLs are connected to your application code.

See also:

See also Debugging View Authorization Failures, Command-Line Pyramid, and p* Scripts Documentation

0.3. Narrative Documentation 331


The Pyramid Web Framework, Version 1.9.4

Extend your application

Pyramid add-ons extend the core of the framework with useful abilities. There are add-ons available for
your favorite template language, SQL and NoSQL databases, authentication services and more.

Supported Pyramid add-ons are held to the same demanding standards as the framework itself. You will
find them to be fully tested and well documented.

See also:

See also https://trypyramid.com/resources-extending-pyramid.html

Write your views, your way

A fundamental task for any framework is to map URLs to code. In Pyramid, that code is called a view
callable. View callables can be functions, class methods or even callable class instances. You are free to
choose the approach that best fits your use case. Regardless of your choice, Pyramid treats them the same.
You can change your mind at any time without any penalty. There are no artificial distinctions between the
various approaches.

Here’s a view callable defined as a function:

1 from pyramid.response import Response


2 from pyramid.view import view_config
3

4 @view_config(route_name='aview')
5 def aview(request):
6 return Response('one')

Here’s a few views defined as methods of a class instead:

1 from pyramid.response import Response


2 from pyramid.view import view_config
3

4 class AView(object):
5 def __init__(self, request):
6 self.request = request
7

8 @view_config(route_name='view_one')
(continues on next page)

332 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


9 def view_one(self):
10 return Response('one')
11

12 @view_config(route_name='view_two')
13 def view_two(self):
14 return Response('two')

See also:

See also @view_config Placement.

Find your static assets

In many web frameworks, the static assets required by an application are kept in a globally shared location,
”the static directory”. Others use a lookup scheme, like an ordered set of template directories. Both of
these approaches have problems when it comes to customization.

Pyramid takes a different approach. Static assets are located using asset specifications, strings that contain
reference both to a Python package name and a file or directory name, e.g. MyPackage:static/
index.html. These specifications are used for templates, JavaScript and CSS, translation files, and any
other package-bound static resource. By using asset specifications, Pyramid makes it easy to extend your
application with other packages without worrying about conflicts.

What happens if another Pyramid package you are using provides an asset you need to customize? Maybe
that page template needs better HTML, or you want to update some CSS. With asset specifications you
can override the assets from other packages using simple wrappers.

Examples: Understanding Asset Specifications and Overriding Assets.

Use your templates

In Pyramid, the job of creating a Response belongs to a renderer. Any templating system—Mako,
Chameleon, Jinja2—can be a renderer. In fact, packages exist for all of these systems. But if you’d rather
use another, a structured API exists allowing you to create a renderer using your favorite templating system.
You can use the templating system you understand, not one required by the framework.

What’s more, Pyramid does not make you use a single templating system exclusively. You can use multiple
templating systems, even in the same project.

Example: Using Templates Directly.

0.3. Narrative Documentation 333


The Pyramid Web Framework, Version 1.9.4

Write testable views

When you use a renderer with your view callable, you are freed from needing to return a ”webby”
Response object. Instead your views can return a simple Python dictionary. Pyramid will take care
of rendering the information in that dictionary to a Response on your behalf. As a result, your views are
more easily tested, since you don’t need to parse HTML to evaluate the results. Pyramid makes it a snap
to write unit tests for your views, instead of requiring you to use functional tests.
For example, a typical web framework might return a Response object from a render_to_response
call:

1 from pyramid.renderers import render_to_response


2

3 def myview(request):
4 return render_to_response('myapp:templates/mytemplate.pt', {'a
,→':1},

5 request=request)

While you can do this in Pyramid, you can also return a Python dictionary:

1 from pyramid.view import view_config


2

3 @view_config(renderer='myapp:templates/mytemplate.pt')
4 def myview(request):
5 return {'a':1}

By configuring your view to use a renderer, you tell Pyramid to use the {'a':1} dictionary and the
specified template to render a response on your behalf.
The string passed as renderer= above is an asset specification. Asset specifications are widely used in
Pyramid. They allow for more reliable customization. See Find your static assets for more information.
Example: Renderers.

Use events to coordinate actions

When writing web applications, it is often important to have your code run at a specific point in the lifecycle
of a request. In Pyramid, you can accomplish this using subscribers and events.
For example, you might have a job that needs to be done each time your application handles a new request.
Pyramid emits a NewRequest event at this point in the request handling lifecycle. You can register your
code as a subscriber to this event using a clear, declarative style:

334 Contents
The Pyramid Web Framework, Version 1.9.4

from pyramid.events import NewRequest


from pyramid.events import subscriber

@subscriber(NewRequest)
def my_job(event):
do_something(event.request)

Pyramid’s event system can be extended as well. If you need, you can create events of your own and send
them using Pyramid’s event system. Then anyone working with your application can subscribe to your
events and coordinate their code with yours.

Example: Using Events and Event Types.

Build international applications

Pyramid ships with internationalization-related features in its core: localization, pluralization, and creating
message catalogs from source files and templates. Pyramid allows for a plurality of message catalogs via
the use of translation domains. You can create a system that has its own translations without conflict with
other translations in other domains.

Example: Internationalization and Localization.

Build efficient applications

Pyramid provides an easy way to cache the results of slow or expensive views. You can indicate in view
configuration that you want a view to be cached:

@view_config(http_cache=3600) # 60 minutes
def myview(request):
# ...

Pyramid will automatically add the appropriate Cache-Control and Expires headers to the response
it creates.

See the add_view() method’s http_cache documentation for more information.

0.3. Narrative Documentation 335


The Pyramid Web Framework, Version 1.9.4

Build fast applications

The Pyramid core is fast. It has been engineered from the ground up for speed. It only does as much
work as absolutely necessary when you ask it to get a job done. If you need speed from your application,
Pyramid is the right choice for you.

Example: https://blog.curiasolutions.com/pages/the-great-web-framework-shootout.html

Store session data

Pyramid has built-in support for HTTP sessions, so you can associate data with specific users between
requests. Lots of other frameworks also support sessions. But Pyramid allows you to plug in your own
custom sessioning system. So long as your system conforms to a documented interface, you can drop it in
in place of the provided system.

Currently there is a binding package for the third-party Redis sessioning system that does exactly this. But
if you have a specialized need (perhaps you want to store your session data in MongoDB), you can. You
can even switch between implementations without changing your application code.

Example: Sessions.

Handle problems with grace

Mistakes happen. Problems crop up. No one writes bug-free code. Pyramid‘provides a way to handle the
exceptions your code encounters. An :term:‘exception view is a special kind of view which is automatically
called when a particular exception type arises without being handled by your application.

For example, you might register an exception view for the Exception exception type, which will catch
all exceptions, and present a pretty ”well, this is embarrassing” page. Or you might choose to register an
exception view for only certain application-specific exceptions. You can make one for when a file is not
found, or when the user doesn’t have permission to do something. In the former case, you can show a
pretty ”Not Found” page; in the latter case you might show a login form.

Example: Custom Exception Views.

And much, much more...

Pyramid has been built with a number of other sophisticated design features that make it adaptable. Read
more about them below.

336 Contents
The Pyramid Web Framework, Version 1.9.4

Advanced Pyramid Design Features

Pyramid has been built from the ground up to avoid the problems that other frameworks can suffer.

You Don’t Need Singletons

Have you ever struggled with parameterizing Django’s settings.py file for multiple installations of the
same Django application? Have you ever needed to monkey-patch a framework fixture to get it to behave
properly for your use case? Have you ever tried to deploy your application using an asynchronous server
and failed?

All these problems are symptoms of mutable global state, also known as import time side effects and arise
from the use of singleton data structures.

Pyramid is written so that you don’t run into these types of problems. It is even possible to run multiple
copies of the same Pyramid application configured differently within a single Python process. This makes
running Pyramid in shared hosting environments a snap.

Simplify your View Code with Predicates

How many times have you found yourself beginning the logic of your view code with something like this:

1 if request.user.is_authenticated:
2 # do one thing
3 else:
4 # do something else

Unlike many other systems, Pyramid allows you to associate more than one view with a single route. For
example, you can create a route with the pattern /items and when the route is matched, you can send the
request to one view if the request method is GET, another view if the request method is POST, and so on.

Pyramid uses a system of view predicates to allow this. Matching the request method is one basic thing
you can do with a view predicate. You can also associate views with other request parameters, such as
elements in the query string, the Accept header, whether the request is an AJAX (XHR) request or not, and
lots of other things.

For our example above, you can do this instead:

0.3. Narrative Documentation 337


The Pyramid Web Framework, Version 1.9.4

1 @view_config(route_name="items", effective_principals=pyramid.
,→security.Authenticated)

2 def auth_view(request):
3 # do one thing
4

5 @view_config(route_name="items")
6 def anon_view(request):
7 # do something else

This approach allows you to develop view code that is simpler, more easily understandable, and more
directly testable.

See also:

See also View Configuration Parameters.

Stop Worrying About Transactions

Pyramid’s cookiecutters render projects that include a transaction management system. When you use
this system, you can stop worrying about when to commit your changes, Pyramid handles it for you. The
system will commit at the end of a request or abort if there was an exception.

Why is that a good thing? Imagine a situation where you manually commit a change to your persistence
layer. It’s very likely that other framework code will run after your changes are done. If an error happens
in that other code, you can easily wind up with inconsistent data if you’re not extremely careful.

Using transaction management saves you from needing to think about this. Either a request completes
successfully and all changes are committed, or it does not and all changes are aborted.

Pyramid’s transaction management is extendable, so you can synchronize commits between multiple
databases or databases of different kinds. It also allows you to do things like conditionally send email
if a transaction is committed, but otherwise keep quiet.

See also:

See also SQLAlchemy + URL dispatch wiki tutorial (note the lack of commit statements anywhere in
application code).

338 Contents
The Pyramid Web Framework, Version 1.9.4

Stop Worrying About Configuration

When a system is small, it’s reasonably easy to keep it all in your head. But as systems grow large, con-
figuration grows more complex. Your app may grow to have hundreds or even thousands of configuration
statements.
Pyramid’s configuration system keeps track of each of your statements. If you accidentally add two that
are identical, or Pyramid can’t make sense out of what it would mean to have both statements active at the
same time, it will complain loudly at startup time.
Pyramid’s configuration system is not dumb though. If you use the include() system, it can automat-
ically resolve conflicts on its own. More local statements are preferred over less local ones. So you can
intelligently factor large systems into smaller ones.
See also:
See also Conflict Detection.

Compose Powerful Apps From Simple Parts

Speaking of the Pyramid structured include() mechanism, it allows you to compose complex appli-
cations from multiple, simple Python packages. All the configuration statements that can be performed
in your main Pyramid application can also be used in included packages. You can add views, routes, and
subscribers, and even set authentication and authorization policies.
If you need, you can extend or override the configuration of an existing application by including its con-
figuration in your own and then modifying it.
For example, if you want to reuse an existing application that already has a bunch of routes, you can just
use the include statement with a route_prefix. All the routes of that application will be availabe,
prefixed as you requested:

1 from pyramid.config import Configurator


2

3 if __name__ == '__main__':
4 config = Configurator()
5 config.include('pyramid_jinja2')
6 config.include('pyramid_exclog')
7 config.include('some.other.package', route_prefix='/somethingelse
,→')

See also:
See also Including Configuration from External Sources and Rules for Building an Extensible Application.

0.3. Narrative Documentation 339


The Pyramid Web Framework, Version 1.9.4

Authenticate Users Your Way

Pyramid ships with prebuilt, well-tested authentication and authorization schemes out of the box. Using a
scheme is a matter of configuration. So if you need to change approaches later, you need only update your
configuration.
In addition, the system that handles authentication and authorization is flexible and pluggable. If you
want to use another security add-on, or define your own, you can. And again, you need only update your
application configuration to make the change.
See also:
See also Enabling an Authorization Policy.

Build Trees of Resources

Pyramid supports traversal, a way of mapping URLs to a concrete resource tree. If your application
naturally consists of an arbitrary heirarchy of different types of content (like a CMS or a Document Man-
agement System), traversal is for you. If you have a requirement for a highly granular security model (”Jane
can edit documents in this folder, but not that one”), traversal can be a powerful approach.
See also:
See also Hello Traversal World and Much Ado About Traversal.

Take Action on Each Request with Tweens

Pyramid has a system for applying an arbitrary action to each request or response called a tween. The
system is similar in concept to WSGI middleware, but can be more useful since tweens run in the Pyramid
context, and have access to templates, request objects, and other niceties.
The Pyramid debug toolbar is a tween, as is the pyramid_tm transaction manager.
See also:
See also Registering Tweens.

Return What You Want From Your Views

We have shown elsewhere (in the Pyramid Introduction) how using a renderer allows you to return simple
Python dictionaries from your view code. But some frameworks allow you to return strings or tuples
from view callables. When frameworks allow for this, code looks slightly prettier because there are fewer
imports and less code. For example, compare this:

340 Contents
The Pyramid Web Framework, Version 1.9.4

1 from pyramid.response import Response


2

3 def aview(request):
4 return Response("Hello world!")

To this:

1 def aview(request):
2 return "Hello world!"

Nicer to look at, right?

Out of the box, Pyramid will raise an exception if you try to run the second example above. After all, a
view should return a response, and ”explicit is better than implicit”.

But if you’re a developer who likes the aesthetics of simplicity, Pyramid provides a way to support this sort
of thing, the response adapter:

1 from pyramid.config import Configurator


2 from pyramid.response import Response
3

4 def string_response_adapter(s):
5 response = Response(s)
6 response.content_type = 'text/html'
7 return response

A new response adapter is registered in configuration:

1 if __name__ == '__main__':
2 config = Configurator()
3 config.add_response_adapter(string_response_adapter, str)

With that, you may return strings from any of your view callables, e.g.:

1 def helloview(request):
2 return "Hello world!"
3

4 def goodbyeview(request):
5 return "Goodbye world!"

0.3. Narrative Documentation 341


The Pyramid Web Framework, Version 1.9.4

You can even use a response adapter to allow for custom content types and return codes:

1 from pyramid.config import Configurator


2

3 def tuple_response_adapter(val):
4 status_int, content_type, body = val
5 response = Response(body)
6 response.content_type = content_type
7 response.status_int = status_int
8 return response
9

10 def string_response_adapter(body):
11 response = Response(body)
12 response.content_type = 'text/html'
13 response.status_int = 200
14 return response
15

16 if __name__ == '__main__':
17 config = Configurator()
18 config.add_response_adapter(string_response_adapter, str)
19 config.add_response_adapter(tuple_response_adapter, tuple)

With this, both of these views will work as expected:

1 def aview(request):
2 return "Hello world!"
3

4 def anotherview(request):
5 return (403, 'text/plain', "Forbidden")

See also:

See also Changing How Pyramid Treats View Responses.

Use Global Response Objects

Views have to return responses. But constructing them in view code is a chore. And perhaps registering
a response adapter as shown above is just too much work. Pyramid provides a global response object as
well. You can use it directly, if you prefer:

342 Contents
The Pyramid Web Framework, Version 1.9.4

1 def aview(request):
2 response = request.response
3 response.body = 'Hello world!'
4 response.content_type = 'text/plain'
5 return response

See also:

See also Varying Attributes of Rendered Responses.

Extend Configuration

Perhaps the Pyramid configurator’s syntax feels a bit verbose to you. Or possibly you would like to add a
feature to configuration without asking the core developers to change Pyramid itself?

You can extend Pyramid’s configurator with your own directives. For example, let’s say you find yourself
calling pyramid.config.Configurator.add_view() repetitively. Usually you can get rid of
the boring with existing shortcuts, but let’s say that this is a case where there is no such shortcut:

1 from pyramid.config import Configurator


2

3 config = Configurator()
4 config.add_route('xhr_route', '/xhr/{id}')
5 config.add_view('my.package.GET_view', route_name='xhr_route',
6 xhr=True, permission='view', request_method='GET')
7 config.add_view('my.package.POST_view', route_name='xhr_route',
8 xhr=True, permission='view', request_method='POST')
9 config.add_view('my.package.HEAD_view', route_name='xhr_route',
10 xhr=True, permission='view', request_method='HEAD')

Pretty tedious right? You can add a directive to the Pyramid configurator to automate some of the tedium
away:

1 from pyramid.config import Configurator


2

3 def add_protected_xhr_views(config, module):


4 module = config.maybe_dotted(module)
5 for method in ('GET', 'POST', 'HEAD'):
(continues on next page)

0.3. Narrative Documentation 343


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


6 view = getattr(module, 'xhr_%s_view' % method, None)
7 if view is not None:
8 config.add_view(view, route_name='xhr_route', xhr=True,
9 permission='view', request_
,→method=method)

10

11 config = Configurator()
12 config.add_directive('add_protected_xhr_views', add_protected_xhr_
,→views)

Once that’s done, you can call the directive you’ve just added as a method of the configurator object:

1 config.add_route('xhr_route', '/xhr/{id}')
2 config.add_protected_xhr_views('my.package')

Much better!

You can share your configuration code with others, too. Add your code to a Python package. Put the call
to add_directive() in a function. When other programmers install your package, they’ll be able to
use your configuration by passing your function to a call to include().

See also:

See also Adding Methods to the Configurator via add_directive.

Introspect Your Application

If you’re building a large, pluggable system, it’s useful to be able to get a list of what has been plugged in
at application runtime. For example, you might want to show users a set of tabs at the top of the screen
based on a list of the views they registered.

Pyramid provides an introspector for just this purpose.

Here’s an example of using Pyramid’s introspector from within a view:

344 Contents
The Pyramid Web Framework, Version 1.9.4

1 from pyramid.view import view_config


2 from pyramid.response import Response
3

4 @view_config(route_name='bar')
5 def show_current_route_pattern(request):
6 introspector = request.registry.introspector
7 route_name = request.matched_route.name
8 route_intr = introspector.get('routes', route_name)
9 return Response(str(route_intr['pattern']))

See also:
See also Pyramid Configuration Introspection.

What Is The Pylons Project?

Pyramid is a member of the collection of software published under the Pylons Project. Pylons software is
written by a loose-knit community of contributors. The Pylons Project website includes details about how
Pyramid relates to the Pylons Project.

Pyramid and Other Web Frameworks

The first release of Pyramid’s predecessor (named repoze.bfg) was made in July of 2008. At the end
of 2010, we changed the name of repoze.bfg to Pyramid. It was merged into the Pylons project as
Pyramid in November of that year.
Pyramid was inspired by Zope, Pylons (version 1.0), and Django. As a result, Pyramid borrows several
concepts and features from each, combining them into a unique web framework.
Similar to Zope, Pyramid applications may easily be extended. If you work within the constraints of
the framework, you can produce applications that can be reused, modified, or extended without needing
to modify the original application code. Pyramid also inherits the concepts of traversal and declarative
security from Zope.
Similar to Pylons version 1.0, Pyramid is largely free of policy. It makes no assertions about which database
or template system you should use. You are free to use whatever third-party components fit the needs of
your specific application. Pyramid also inherits its approach to URL dispatch from Pylons.
Similar to Django, Pyramid values extensive documentation. In addition, the concept of a view is used by
Pyramid much as it would be by Django.
Other Python web frameworks advertise themselves as members of a class of web frameworks named
model-view-controller frameworks. The authors of Pyramid do not believe that the MVC pattern fits the
web particularly well. However, if this abstraction works for you, Pyramid also generally fits into this class.

0.3. Narrative Documentation 345


The Pyramid Web Framework, Version 1.9.4

0.3.2 Installing Pyramid

This installation guide emphasizes the use of Python 3.4 and greater for simplicity.

Before You Install Pyramid

Install Python version 3.4 or greater for your operating system, and satisfy the Requirements for Installing
Packages, as described in the following sections.

Python Versions

As of this writing, Pyramid is tested against Python 2.7, Python 3.4, Python 3.5, Python 3.6, and PyPy.

Pyramid is known to run on all popular UNIX-like systems such as Linux, Mac OS X, and FreeBSD, as
well as on Windows platforms. It is also known to run on PyPy (1.9+).

Pyramid installation does not require the compilation of any C code. However, some Pyramid dependencies
may attempt to build binary extensions from C code for performance speed ups. If a compiler or Python
headers are unavailable, the dependency will fall back to using pure Python instead.

If you see any warnings or errors related to failing to compile the binary extensions, in most cases
you may safely ignore those errors. If you wish to use the binary extensions, please verify that you have a
functioning compiler and the Python header files installed for your operating system.

For Mac OS X Users

Python comes pre-installed on Mac OS X, but due to Apple’s release cycle, it is often out of date. Unless
you have a need for a specific earlier version, it is recommended to install the latest 3.x version of Python.

You can install the latest version of Python for Mac OS X from the binaries on python.org.

Alternatively, you can use the homebrew package manager.

346 Contents
The Pyramid Web Framework, Version 1.9.4

# for python 3.x


$ brew install python3

If you use an installer for your Python, then you can skip to the section Installing Pyramid on a UNIX
System.

If You Don’t Yet Have a Python Interpreter (UNIX)

If your system doesn’t have a Python interpreter, and you’re on UNIX, you can either install Python using
your operating system’s package manager or you can install Python from source fairly easily on any UNIX
system that has development tools.

See also:

See the official Python documentation Using Python on Unix platforms for full details.

If You Don’t Yet Have a Python Interpreter (Windows)

If your Windows system doesn’t have a Python interpreter, you’ll need to install it by downloading a
Python 3.x-series interpreter executable from python.org’s download section (the files labeled ”Windows
Installer”). Once you’ve downloaded it, double click on the executable and select appropriate options dur-
ing the installation process. To standardize this documentation, we used the GUI installer and selected the
following options:

• Screen 1: Install Python 3.x.x (32- or 64-bit)

– Check ”Install launcher for all users (recommended)”.

– Check ”Add Python 3.x to PATH”.

– Click ”Install Now”.

• Screen 2: User Account Control

– Click ”Yes”.

0.3. Narrative Documentation 347


The Pyramid Web Framework, Version 1.9.4

See also:

See the official Python documentation Using Python on Windows for full details.

See also:

You might also need to download and install the Python for Windows extensions. Carefully read the
README.txt file at the end of the list of builds, and follow its directions. Make sure you get the proper
32- or 64-bit build and Python version.

See also:

Python launcher for Windows provides a command py that allows users to run any installed version of
Python.

After you install Python on Windows, you might need to add the directory where Python and
other programs—such as pip, setuptools, and cookiecutter—are installed to your environment’s Path.
This will make it possible to invoke them from a command prompt.

To do so, search for ”Environment Variables” on your computer (on Windows 10, it is under System
Properties –> Advanced) and add that directory to the Path environment variable, using the
GUI to edit path segments.

Example segments should look like C:\Users\<username>\AppData\Local\Programs\Python3x-32,


where you have your username instead of <username>, and your version of Python and whether
it is 32- or 64-bit. Additionally ensure you have the path segment ending with \Scripts, i.e.,
C:\Users\<username>\AppData\Local\Programs\Python3x-32\Scripts, and for
user-installed Python programs, %APPDATA%\Python\Python3x\Scripts.

You may need to restart your command prompt session to load the environment variables.

See also:

See Configuring Python (on Windows) for full details.

348 Contents
The Pyramid Web Framework, Version 1.9.4

Requirements for Installing Packages

Use pip for installing packages and python3 -m venv env for creating a virtual environment. A
virtual environment is a semi-isolated Python environment that allows packages to be installed for use by
a particular application, rather than being installed system wide.

See also:

See the Python Packaging Authority’s (PyPA) documention Requirements for Installing Packages for full
details.

Installing Pyramid on a UNIX System

After installing Python as described previously in For Mac OS X Users or If You Don’t Yet Have a Python
Interpreter (UNIX), and satisfying the Requirements for Installing Packages, you can now install Pyramid.

1. Make a virtual environment workspace:

$ export VENV=~/env
$ python3 -m venv $VENV

You can either follow the use of the environment variable $VENV, or replace it with the root directory
of the virtual environment. If you choose the former approach, ensure that $VENV is an absolute
path. In the latter case, the export command can be skipped.

2. (Optional) Consider using $VENV/bin/activate to make your shell environment wired to use
the virtual environment.

3. Use pip to get Pyramid and its direct dependencies installed:

$ $VENV/bin/pip install "pyramid==1.9.4"

Why use $VENV/bin/pip instead of source bin/activate, then pip?

$VENV/bin/pip clearly specifies that pip is run from within the virtual environment and not at the
system level.

activate makes changes to the user’s shell environment which can often be convenient. However, in the
context of long-form documentation, environment configuration can easily be forgotten. By keeping each

0.3. Narrative Documentation 349


The Pyramid Web Framework, Version 1.9.4

snippet explicit we can reduce copy / paste errors by users in which commands are executed against the
wrong Python environment. Also, deactivate might not correctly restore previous shell environment
variables. Avoiding activate keeps the environment more reproducible.

Although using source bin/activate, then pip, requires fewer key strokes to issue commands
once invoked, there are other things to consider. Michael F. Lamb (datagrok) presents a summary in
Virtualenv’s bin/activate is Doing It Wrong.

Ultimately we prefer to keep things clear and simple, so we use $VENV/bin/pip.

Installing Pyramid on a Windows System

After installing Python as described previously in If You Don’t Yet Have a Python Interpreter (Windows),
and satisfying the Requirements for Installing Packages, you can now install Pyramid.

1. Make a virtual environment workspace:

c:\> cd \
c:\> set VENV=c:\env
c:\> python -m venv %VENV%
c:\> cd %VENV%

You can either follow the use of the environment variable %VENV%, or replace it with the root
directory of the virtual environment. If you choose the former approach, ensure that %VENV% is an
absolute path. In the latter case, the set command can be skipped.

2. (Optional) Consider using %VENV%\Scripts\activate.bat to make your shell environment


wired to use the virtual environment.

3. Use pip to get Pyramid and its direct dependencies installed:

c:\> %VENV%\Scripts\pip install "pyramid==1.9.4"

See the note above for Why use $VENV/bin/pip instead of source bin/activate, then pip.

350 Contents
The Pyramid Web Framework, Version 1.9.4

What Gets Installed

When you install Pyramid, various libraries such as WebOb, PasteDeploy, and others are installed.

Additionally, as chronicled in Creating a Pyramid Project, cookiecutters will be used, which make it easy
to start a new Pyramid project.

0.3.3 Creating Your First Pyramid Application

In this chapter, we will walk through the creation of a tiny Pyramid application. After we’re finished
creating the application, we’ll explain in more detail how it works. It assumes you already have Pyramid
installed. If you do not, head over to the Installing Pyramid section.

Hello World

Here’s one of the very simplest Pyramid applications:

1 from wsgiref.simple_server import make_server


2 from pyramid.config import Configurator
3 from pyramid.response import Response
4

6 def hello_world(request):
7 return Response('Hello %(name)s!' % request.matchdict)
8

9 if __name__ == '__main__':
10 with Configurator() as config:
11 config.add_route('hello', '/hello/{name}')
12 config.add_view(hello_world, route_name='hello')
13 app = config.make_wsgi_app()
14 server = make_server('0.0.0.0', 8080, app)
15 server.serve_forever()

When this code is inserted into a Python script named helloworld.py and executed by a Python
interpreter which has the Pyramid software installed, an HTTP server is started on TCP port 8080.

On UNIX:

0.3. Narrative Documentation 351


The Pyramid Web Framework, Version 1.9.4

$ $VENV/bin/python helloworld.py

On Windows:

c:\> %VENV%\Scripts\python helloworld.py

This command will not return and nothing will be printed to the console. When port 8080 is visited by
a browser on the URL /hello/world, the server will simply serve up the text ”Hello world!”. If your
application is running on your local system, using http://localhost:8080/hello/world in a browser will show
this result.

Each time you visit a URL served by the application in a browser, a logging line will be emitted to the
console displaying the hostname, the date, the request method and path, and some additional information.
This output is done by the wsgiref server we’ve used to serve this application. It logs an ”access log” in
Apache combined logging format to the console.

Press Ctrl-C (or Ctrl-Break on Windows) to stop the application.

Now that we have a rudimentary understanding of what the application does, let’s examine it piece by
piece.

Imports

The above helloworld.py script uses the following set of import statements:

1 from wsgiref.simple_server import make_server


2 from pyramid.config import Configurator
3 from pyramid.response import Response

The script imports the Configurator class from the pyramid.config module. An instance of the
Configurator class is later used to configure your Pyramid application.

Like many other Python web frameworks, Pyramid uses the WSGI protocol to connect an application and
a web server together. The wsgiref server is used in this example as a WSGI server for convenience, as
it is shipped within the Python standard library.

The script also imports the pyramid.response.Response class for later use. An instance of this
class will be used to create a web response.

352 Contents
The Pyramid Web Framework, Version 1.9.4

View Callable Declarations

The above script, beneath its set of imports, defines a function named hello_world.

6 def hello_world(request):
7 return Response('Hello %(name)s!' % request.matchdict)

The function accepts a single argument (request) and it returns an instance of the pyramid.
response.Response class. The single argument to the class’ constructor is a string computed from
parameters matched from the URL. This value becomes the body of the response.

This function is known as a view callable. A view callable accepts a single argument, request. It is
expected to return a response object. A view callable doesn’t need to be a function; it can be represented
via another type of object, like a class or an instance, but for our purposes here, a function serves us well.

A view callable is always called with a request object. A request object is a representation of an HTTP
request sent to Pyramid via the active WSGI server.

A view callable is required to return a response object because a response object has all the information
necessary to formulate an actual HTTP response; this object is then converted to text by the WSGI server
which called Pyramid and it is sent back to the requesting browser. To return a response, each view callable
creates an instance of the Response class. In the hello_world function, a string is passed as the body
to the response.

Application Configuration

In the above script, the following code represents the configuration of this simple application. The ap-
plication is configured using the previously defined imports and function definitions, placed within the
confines of an if statement:

9 if __name__ == '__main__':
10 with Configurator() as config:
11 config.add_route('hello', '/hello/{name}')
12 config.add_view(hello_world, route_name='hello')
13 app = config.make_wsgi_app()
14 server = make_server('0.0.0.0', 8080, app)
15 server.serve_forever()

Let’s break this down piece by piece.

0.3. Narrative Documentation 353


The Pyramid Web Framework, Version 1.9.4

Configurator Construction

9 if __name__ == '__main__':
10 with Configurator() as config:

The if __name__ == '__main__': line in the code sample above represents a Python idiom: the
code inside this if clause is not invoked unless the script containing this code is run directly from the
operating system command line. For example, if the file named helloworld.py contains the entire
script body, the code within the if statement will only be invoked when python helloworld.py is
executed from the command line.

Using the if clause is necessary—or at least best practice—because code in a Python .py file may be
eventually imported via the Python import statement by another .py file. .py files that are imported by
other .py files are referred to as modules. By using the if __name__ == '__main__': idiom, the
script above is indicating that it does not want the code within the if statement to execute if this module is
imported from another; the code within the if block should only be run during a direct script execution.

The with Configurator() as config: line above creates an instance of the Configurator
class using a context manager. The resulting config object represents an API which the script uses to
configure this particular Pyramid application. Methods called on the Configurator will cause registrations
to be made in an application registry associated with the application.

Adding Configuration

11 config.add_route('hello', '/hello/{name}')
12 config.add_view(hello_world, route_name='hello')

The first line above calls the pyramid.config.Configurator.add_route() method, which


registers a route to match any URL path that begins with /hello/ followed by a string.

The second line registers the hello_world function as a view callable and makes sure that it will be
called when the hello route is matched.

WSGI Application Creation

354 Contents
The Pyramid Web Framework, Version 1.9.4

13 app = config.make_wsgi_app()

After configuring views and ending configuration, the script creates a WSGI application via the
pyramid.config.Configurator.make_wsgi_app() method. A call to make_wsgi_app
implies that all configuration is finished (meaning all method calls to the configurator, which sets up views
and various other configuration settings, have been performed). The make_wsgi_app method returns
a WSGI application object that can be used by any WSGI server to present an application to a requestor.
WSGI is a protocol that allows servers to talk to Python applications. We don’t discuss WSGI in any depth
within this book, but you can learn more about it by reading its documentation.

The Pyramid application object, in particular, is an instance of a class representing a Pyramid router. It
has a reference to the application registry which resulted from method calls to the configurator used to
configure it. The router consults the registry to obey the policy choices made by a single application.
These policy choices were informed by method calls to the Configurator made earlier; in our case, the
only policy choices made were implied by calls to its add_view and add_route methods.

WSGI Application Serving

14 server = make_server('0.0.0.0', 8080, app)


15 server.serve_forever()

Finally, we actually serve the application to requestors by starting up a WSGI server. We happen to use the
wsgiref make_server server maker for this purpose. We pass in as the first argument '0.0.0.0',
which means ”listen on all TCP interfaces”. By default, the HTTP server listens only on the 127.0.0.1
interface, which is problematic if you’re running the server on a remote system and you wish to access it
with a web browser from a local system. We also specify a TCP port number to listen on, which is 8080,
passing it as the second argument. The final argument is the app object (a router), which is the application
we wish to serve. Finally, we call the server’s serve_forever method, which starts the main loop in
which it will wait for requests from the outside world.

When this line is invoked, it causes the server to start listening on TCP port 8080. The server will serve
requests forever, or at least until we stop it by killing the process which runs it (usually by pressing Ctrl-C
or Ctrl-Break in the terminal we used to start it).

Conclusion

Our hello world application is one of the simplest possible Pyramid applications, configured ”impera-
tively”. We can see that it’s configured imperatively because the full power of Python is available to us as
we perform configuration tasks.

0.3. Narrative Documentation 355


The Pyramid Web Framework, Version 1.9.4

References

For more information about the API of a Configurator object, see Configurator .

For more information about view configuration, see View Configuration.

0.3.4 Application Configuration

Most people already understand ”configuration” as settings that influence the operation of an application.
For instance, it’s easy to think of the values in a .ini file parsed at application startup time as ”configu-
ration”. However, if you’re reasonably open-minded, it’s easy to think of code as configuration too. Since
Pyramid, like most other web application platforms, is a framework, it calls into code that you write (as
opposed to a library, which is code that exists purely for you to call). The act of plugging application code
that you’ve written into Pyramid is also referred to within this documentation as ”configuration”; you are
configuring Pyramid to call the code that makes up your application.

See also:

For information on .ini files for Pyramid applications see the Startup chapter.

There are two ways to configure a Pyramid application: imperative configuration and declarative config-
uration. Both are described below.

Imperative Configuration

”Imperative configuration” just means configuration done by Python statements, one after the next. Here’s
one of the simplest Pyramid applications, configured imperatively:

1 from wsgiref.simple_server import make_server


2 from pyramid.config import Configurator
3 from pyramid.response import Response
4

5 def hello_world(request):
6 return Response('Hello world!')
7

8 if __name__ == '__main__':
9 with Configurator() as config:
10 config.add_view(hello_world)
11 app = config.make_wsgi_app()
12 server = make_server('0.0.0.0', 8080, app)
13 server.serve_forever()

356 Contents
The Pyramid Web Framework, Version 1.9.4

We won’t talk much about what this application does yet. Just note that the configuration statements
take place underneath the if __name__ == '__main__': stanza in the form of method calls on a
Configurator object (e.g., config.add_view(...)). These statements take place one after the other,
and are executed in order, so the full power of Python, including conditionals, can be employed in this
mode of configuration.

Declarative Configuration

It’s sometimes painful to have all configuration done by imperative code, because often the code for a single
application may live in many files. If the configuration is centralized in one place, you’ll need to have at
least two files open at once to see the ”big picture”: the file that represents the configuration, and the file
that contains the implementation objects referenced by the configuration. To avoid this, Pyramid allows
you to insert configuration decoration statements very close to code that is referred to by the declaration
itself. For example:

1 from pyramid.response import Response


2 from pyramid.view import view_config
3

4 @view_config(name='hello', request_method='GET')
5 def hello(request):
6 return Response('Hello')

The mere existence of configuration decoration doesn’t cause any configuration registration to be per-
formed. Before it has any effect on the configuration of a Pyramid application, a configuration decoration
within application code must be found through a process known as a scan.

For example, the pyramid.view.view_config decorator in the code example above adds an at-
tribute to the hello function, making it available for a scan to find it later.

A scan of a module or a package and its subpackages for decorations happens when the pyramid.
config.Configurator.scan() method is invoked: scanning implies searching for configuration
declarations in a package and its subpackages. For example:

1 from wsgiref.simple_server import make_server


2 from pyramid.config import Configurator
3 from pyramid.response import Response
4 from pyramid.view import view_config
5

6 @view_config()
7 def hello(request):
(continues on next page)

0.3. Narrative Documentation 357


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


8 return Response('Hello')
9

10 if __name__ == '__main__':
11 with Configurator() as config:
12 config.scan()
13 app = config.make_wsgi_app()
14 server = make_server('0.0.0.0', 8080, app)
15 server.serve_forever()

The scanning machinery imports each module and subpackage in a package or module recursively, looking
for special attributes attached to objects defined within a module. These special attributes are typically
attached to code via the use of a decorator. For example, the view_config decorator can be attached
to a function or instance method.

Once scanning is invoked, and configuration decoration is found by the scanner, a set of calls are made
to a Configurator on your behalf. These calls replace the need to add imperative configuration statements
that don’t live near the code being configured.

The combination of configuration decoration and the invocation of a scan is collectively known as declar-
ative configuration.

In the example above, the scanner translates the arguments to view_config into a call to the pyramid.
config.Configurator.add_view() method, effectively:

config.add_view(hello)

Summary

There are two ways to configure a Pyramid application: declaratively and imperatively. You can choose
the mode with which you’re most comfortable; both are completely equivalent. Examples in this docu-
mentation will use both modes interchangeably.

0.3.5 Creating a Pyramid Project

As we saw in Creating Your First Pyramid Application, it’s possible to create a Pyramid application com-
pletely manually. However, it’s usually more convenient to use a cookiecutter to generate a basic Pyramid
project.

358 Contents
The Pyramid Web Framework, Version 1.9.4

A project is a directory that contains at least one Python package. You’ll use a cookiecutter to create a
project, and you’ll create your application logic within a package that lives inside the project. Even if your
application is extremely simple, it is useful to place code that drives the application within a package,
because (1) a package is more easily extended with new code, and (2) an application that lives inside a
package can also be distributed more easily than one which does not live within a package.

The Pylons Project provides several Pyramid cookiecutters that you can use to generate a project. Each
cookiecutter makes different configuration assumptions about what type of application you’re trying to
construct.

These cookiecutters are rendered using the cookiecutter command that you may install.

See also:

See also Cookiecutter Installation.

Pyramid cookiecutters

Pyramid cookiecutters released under the Pylons Project differ from each other on a number of axes:

• the persistence mechanism they offer (no persistence mechanism, SQLAlchemy with SQLite, or
ZODB)

• the mechanism they use to map URLs to code (URL dispatch or traversal)

• templating libraries (Jinja2, Chameleon, or Mako)

• pyramid-cookiecutter-starter

• pyramid-cookiecutter-alchemy

• pyramid-cookiecutter-zodb

These cookiecutters include:

pyramid-cookiecutter-starter URL dispatch for routing and either Jinja2, Chameleon, or


Mako for templating

pyramid-cookiecutter-alchemy SQLite for persistent storage, SQLAlchemy for an ORM, URL


dispatch for routing, and Jinja2 for templating.

pyramid-cookiecutter-zodb ZODB for persistent storage, traversal for routing, and Chameleon
for templating

0.3. Narrative Documentation 359


The Pyramid Web Framework, Version 1.9.4

Creating the Project

In Installing Pyramid, you created a virtual Python environment via the venv command. We called the
virtual environment directory env and set an environment variable VENV to its path.

We assume that you previously installed cookiecutter, following its installation instructions.

We’ll choose pyramid-cookiecutter-starter to start the project. When we invoke


cookiecutter, it will create a directory that represents our project.

We assume our current working directory is the value of VENV.

On all platforms, generate a project using cookiecutter.

$ cookiecutter gh:Pylons/pyramid-cookiecutter-starter --checkout 1.


,→9-branch

If prompted for the first item, accept the default yes by hitting return.

You've cloned ~/.cookiecutters/pyramid-cookiecutter-starter before.


Is it okay to delete and re-clone it? [yes]: yes
project_name [Pyramid Scaffold]: myproject
repo_name [myproject]: myproject
Select template_language:
1 - jinja2
2 - chameleon
3 - mako
Choose from 1, 2, 3 [1]: 1

We then run through the following commands.

On UNIX:

# Reset our environment variable for a new virtual environment.


$ export VENV=~/env/myproject/env
# Change directory into your newly created project.
$ cd myproject
# Create a new virtual environment...
$ python3 -m venv $VENV
# ...where we upgrade packaging tools.
$ env/bin/pip install --upgrade pip setuptools

Or on Windows:

360 Contents
The Pyramid Web Framework, Version 1.9.4

# Reset our environment variable for a new virtual environment.


c:\> set VENV=c:\env\myproject\env
# Change directory into your newly created project.
c:\> cd myproject
# Create a new virtual environment...
c:\myproject> python -m venv %VENV%
# ...where we upgrade packaging tools.
c:\myproject> %VENV%\Scripts\pip install --upgrade pip setuptools

As a result of invoking the cookiecutter command, a directory named myproject is created. That
directory is a project directory. The setup.py file in that directory can be used to distribute your appli-
cation, or install your application for deployment or development.

An .ini file named development.ini will be created in the project directory. You will use this .ini
file to configure a server, to run your application, and to debug your application. It contains configuration
that enables an interactive debugger and settings optimized for development.

Another .ini file named production.ini will also be created in the project directory. It contains
configuration that disables any interactive debugger (to prevent inappropriate access and disclosure), and
turns off a number of debugging settings. You can use this file to put your application into production.

The myproject project directory contains an additional subdirectory named myproject (note the case
difference) representing a Python package which holds very simple Pyramid sample code. This is where
you’ll edit your application’s Python code and templates.

We created this project in a directory next to its virtual environment directory. However, note that this is
not mandatory. The project directory can go more or less anywhere on your filesystem. You don’t need
to put it in a special ”web server” directory. You could put it within a virtual environment directory. The
author uses Linux mainly, and tends to put project directories which he creates within his ~/projects
directory. On Windows, it’s a good idea to put project directories within a directory that contains no space
characters, so it’s wise to avoid a path that contains, i.e., My Documents. As a result, the author, when
he uses Windows, just puts his projects in C:\projects.

You’ll need to avoid using cookiecutter to create a project with the same name as a Python
standard library component. In particular, this means you should avoid using the names site or
test, both of which conflict with Python standard library packages. You should also avoid using the
name pyramid, which will conflict with Pyramid itself.

0.3. Narrative Documentation 361


The Pyramid Web Framework, Version 1.9.4

Installing your Newly Created Project for Development

To install a newly created project for development, you should cd to the newly created project directory
and use the Python interpreter from the virtual environment you created during Installing Pyramid to
invoke the command pip install -e ., which installs the project in development mode (-e is for
”editable”) into the current directory (.).

The file named setup.py will be in the root of the cookiecutter-generated project directory. The python
you’re invoking should be the one that lives in the bin (or Scripts on Windows) directory of your
virtual Python environment. Your terminal’s current working directory must be the newly created project
directory.

On UNIX:

$ $VENV/bin/pip install -e .

Or on Windows:

c:\env\myproject> %VENV%\Scripts\pip install -e .

Elided output from a run of this command on UNIX is shown below:

Running setup.py develop for myproject


Successfully installed Jinja2-2.8 Mako-1.0.6 MarkupSafe-0.23 \
PasteDeploy-1.5.2 Pygments-2.1.3 WebOb-1.7.0 myproject pyramid-1.7.
,→3 \

pyramid-debugtoolbar-3.0.5 pyramid-jinja2-2.7 pyramid-mako-1.0.2 \


repoze.lru-0.6 translationstring-1.3 venusian-1.0 waitress-1.0.1 \
zope.deprecation-4.2.0 zope.interface-4.3.3

This will install a distribution representing your project into the virtual environment interpreter’s library
set so it can be found by import statements and by other console scripts such as pserve, pshell,
proutes, and pviews.

Running the Tests for Your Application

To run unit tests for your application, you must first install the testing dependencies.

On UNIX:

362 Contents
The Pyramid Web Framework, Version 1.9.4

$ $VENV/bin/pip install -e ".[testing]"

On Windows:

c:\env\myproject> %VENV%\Scripts\pip install -e ".[testing]"

Once the testing requirements are installed, then you can run the tests using the py.test command that
was just installed in the bin directory of your virtual environment.

On UNIX:

$ $VENV/bin/py.test -q

On Windows:

c:\env\myproject> %VENV%\Scripts\py.test -q

Here’s sample output from a test run on UNIX:

$ $VENV/bin/py.test -q
..
2 passed in 0.47 seconds

The tests themselves are found in the tests.py module in your cookiecutter-generated project.
Within a project generated by the pyramid-cookiecutter-starter cookiecutter, only two sample
tests exist.

The -q option is passed to the py.test command to limit the output to a stream of dots. If you
don’t pass -q, you’ll see verbose test result output (which normally isn’t very useful).

Alternatively, if you’d like to see test coverage, pass the --cov option to py.test:

$ $VENV/bin/py.test --cov -q

Cookiecutters include configuration defaults for py.test and test coverage. These configuration files
are pytest.ini and .coveragerc, located at the root of your package. Without these defaults, we
would need to specify the path to the module on which we want to run tests and coverage.

0.3. Narrative Documentation 363


The Pyramid Web Framework, Version 1.9.4

$ $VENV/bin/py.test --cov=myproject myproject/tests.py -q

See also:

See py.test’s documentation for Usage and Invocations or invoke py.test -h to see its full set of options.

Running the Project Application

See also:

See also the output of pserve –help.

Once a project is installed for development, you can run the application it represents using the pserve
command against the generated configuration file. In our case, this file is named development.ini.

On UNIX:

$ $VENV/bin/pserve development.ini

On Windows:

c:\env\myproject> %VENV%\Scripts\pserve development.ini

Here’s sample output from a run of pserve on UNIX:

$ $VENV/bin/pserve development.ini
Starting server in PID 77171.
Serving on http://localhost:6543
Serving on http://localhost:6543

Access is restricted such that only a browser running on the same machine as Pyramid will be able to access
your Pyramid application. However, if you want to open access to other machines on the same network,
then edit the development.ini file, and replace the listen value in the [server:main] section,
changing it from localhost:6543 to *:6543 (this is equivalent to 0.0.0.0:6543 [::]:6543).
For example:

364 Contents
The Pyramid Web Framework, Version 1.9.4

[server:main]
use = egg:waitress#main
listen = *:6543

Now when you use pserve to start the application, it will respond to requests on all IP addresses possessed
by your system, not just requests to localhost. This is what the 0.0.0.0 in serving on http:/
/0.0.0.0:6543 means. The server will respond to requests made to 127.0.0.1 and on any external
IP address. For example, your system might be configured to have an external IP address 192.168.1.
50. If that’s the case, if you use a browser running on the same system as Pyramid, it will be able to access
the application via http://127.0.0.1:6543/ as well as via http://192.168.1.50:6543/.
However, other people on other computers on the same network will also be able to visit your Pyramid
application in their browser by visiting http://192.168.1.50:6543/. The same holds true if you
use IPv6. [::] means the same as 0.0.0.0 but for IPv6 protocol.

You can change the port on which the server runs on by changing the same portion of the development.
ini file. For example, you can change the listen = localhost:6543 line in the development.
ini file’s [server:main] section to listen = localhost:8080 to run the server on port 8080
instead of port 6543.

You can shut down a server started this way by pressing Ctrl-C (or Ctrl-Break on Windows).

The default server used to run your Pyramid application when a project is created from a cookiecutter is
named Waitress. This server is what prints the Serving on... line when you run pserve. It’s a
good idea to use this server during development because it’s very simple. It can also be used for light
production. Setting your application up under a different server is not advised until you’ve done some
development work under the default server, particularly if you’re not yet experienced with Python web
development. Python web server setup can be complex, and you should get some confidence that your
application works in a default environment before trying to optimize it or make it ”more like production”.
It’s awfully easy to get sidetracked trying to set up a non-default server for hours without actually starting
to do any development. One of the nice things about Python web servers is that they’re largely interchange-
able, so if your application works under the default server, it will almost certainly work under any other
server in production if you eventually choose to use a different one. Don’t worry about it right now.

For more detailed information about the startup process, see Startup. For more information about environ-
ment variables and configuration file settings that influence startup and runtime behavior, see Environment
Variables and .ini File Settings.

Reloading Code

During development, it’s often useful to run pserve using its --reload option. When --reload is
passed to pserve, changes to any Python module your project uses will cause the server to restart. This

0.3. Narrative Documentation 365


The Pyramid Web Framework, Version 1.9.4

typically makes development easier, as changes to Python code made within a Pyramid application is not
put into effect until the server restarts.

For example, on UNIX:

$ $VENV/bin/pserve development.ini --reload


Starting subprocess with file monitor
Starting server in PID 16601.
Serving on http://localhost:6543
Serving on http://localhost:6543

Now if you make a change to any of your project’s .py files or .ini files, you’ll see the server restart
automatically:

development.ini changed; reloading...


-------------------- Restarting --------------------
Starting server in PID 16602.
Serving on http://localhost:6543
Serving on http://localhost:6543

Changes to template files (such as .pt or .mak files) won’t cause the server to restart. Changes to tem-
plate files don’t require a server restart as long as the pyramid.reload_templates setting in the
development.ini file is true. Changes made to template files when this setting is true will take
effect immediately without a server restart.

Viewing the Application

Once your application is running via pserve, you may visit http://localhost:6543/ in your
browser. You will see something in your browser like what is displayed in the following image:

366 Contents
The Pyramid Web Framework, Version 1.9.4

This is the page shown by default when you visit an unmodified cookiecutter generated
pyramid-cookiecutter-starter application in a browser.

The Debug Toolbar

0.3. Narrative Documentation 367


The Pyramid Web Framework, Version 1.9.4

If you click on the Pyramid logo at the top right of the page, a new target window will open to present
a debug toolbar that provides various niceties while you’re developing. This logo will float above every
HTML page served by Pyramid while you develop an application, and allows you to show the toolbar as
necessary.

If you don’t see the Pyramid logo on the top right of the page, it means you’re browsing from a system
that does not have debugging access. By default, for security reasons, only a browser originating from
localhost (127.0.0.1) can see the debug toolbar. To allow your browser on a remote system to
access the server, add a line within the [app:main] section of the development.ini file in the
form debugtoolbar.hosts = X .X.X.X. For example, if your Pyramid application is running
on a remote system, and you’re browsing from a host with the IP address 192.168.1.1, you’d add
something like this to enable the toolbar when your system contacts Pyramid:

[app:main]
# .. other settings ...
debugtoolbar.hosts = 192.168.1.1

368 Contents
The Pyramid Web Framework, Version 1.9.4

For more information about what the debug toolbar allows you to do, see the documentation for pyra-
mid_debugtoolbar.

The debug toolbar will not be shown (and all debugging will be turned off) when you use the
production.ini file instead of the development.ini ini file to run the application.

You can also turn the debug toolbar off by editing development.ini and commenting out a line. For
example, instead of:

1 [app:main]
2 # ... elided configuration
3 pyramid.includes =
4 pyramid_debugtoolbar

Put a hash mark at the beginning of the pyramid_debugtoolbar line:

1 [app:main]
2 # ... elided configuration
3 pyramid.includes =
4 # pyramid_debugtoolbar

Then restart the application to see that the toolbar has been turned off.

Note that if you comment out the pyramid_debugtoolbar line, the # must be in the first column.
If you put it anywhere else, and then attempt to restart the application, you’ll receive an error that ends
something like this:

ImportError: No module named #pyramid_debugtoolbar

The Project Structure

The pyramid-cookiecutter-starter cookiecutter generated a project (named myproject),


which contains a Python package. The package is also named myproject; the cookiecutter generates a
project which contains a package that shares its name.

All Pyramid cookiecutter-generated projects share a similar structure. The myproject project
we’ve generated has the following directory structure:

0.3. Narrative Documentation 369


The Pyramid Web Framework, Version 1.9.4

myproject/
├── .coveragerc
├── CHANGES.txt
├── MANIFEST.in
├── myproject
│ ├── __init__.py
│ ├── static
│ │ ├── pyramid-16x16.png
│ │ ├── pyramid.png
│ │ └── theme.css
│ ├── templates
│ │ ├── layout.jinja2
│ │ └── mytemplate.jinja2
│ ├── tests.py
│ └── views.py
├── README.txt
├── development.ini
├── production.ini
├── pytest.ini
└── setup.py

The myproject Project

The myproject project directory is the distribution and deployment wrapper for your application. It
contains both the myproject package representing your application as well as files used to describe,
run, and test your application.

1. .coveragerc configures coverage when running tests.

2. CHANGES.txt describes the changes you’ve made to the application. It is conventionally written
in reStructuredText format.

3. MANIFEST.in is a distutils ”manifest” file, naming which files should be included in a source
distribution of the package when python setup.py sdist is run.

4. README.txt describes the application in general. It is conventionally written in reStructuredText


format.

5. development.ini is a PasteDeploy configuration file that can be used to execute your applica-
tion during development.

370 Contents
The Pyramid Web Framework, Version 1.9.4

6. production.ini is a PasteDeploy configuration file that can be used to execute your application
in a production configuration.

7. pytest.ini is a configuration file for running tests.

8. setup.py is the file you’ll use to test and distribute your application. It is a standard setuptools
setup.py file.

development.ini

The development.ini file is a PasteDeploy configuration file. Its purpose is to specify an application
to run when you invoke pserve, as well as the deployment settings provided to that application.

The generated development.ini file looks like so:

1 ###
2 # app configuration
3 # https://docs.pylonsproject.org/projects/pyramid/en/latest/narr/
,→environment.html

4 ###
5

6 [app:main]
7 use = egg:myproject
8

9 pyramid.reload_templates = true
10 pyramid.debug_authorization = false
11 pyramid.debug_notfound = false
12 pyramid.debug_routematch = false
13 pyramid.default_locale_name = en
14 pyramid.includes =
15 pyramid_debugtoolbar
16

17 # By default, the toolbar only appears for clients from IP addresses


18 # '127.0.0.1' and '::1'.
19 # debugtoolbar.hosts = 127.0.0.1 ::1
20

21 ###
22 # wsgi server configuration
23 ###
24

(continues on next page)

0.3. Narrative Documentation 371


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


25 [server:main]
26 use = egg:waitress#main
27 listen = localhost:6543
28

29 ###
30 # logging configuration
31 # https://docs.pylonsproject.org/projects/pyramid/en/latest/narr/
,→logging.html

32 ###
33

34 [loggers]
35 keys = root, myproject
36

37 [handlers]
38 keys = console
39

40 [formatters]
41 keys = generic
42

43 [logger_root]
44 level = INFO
45 handlers = console
46

47 [logger_myproject]
48 level = DEBUG
49 handlers =
50 qualname = myproject
51

52 [handler_console]
53 class = StreamHandler
54 args = (sys.stderr,)
55 level = NOTSET
56 formatter = generic
57

58 [formatter_generic]
59 format = %(asctime)s %(levelname)-5.5s [%(name)s:%(lineno)s][
,→%(threadName)s] %(message)s

This file contains several sections including [app:main], [server:main], and several other sections
related to logging configuration.
The [app:main] section represents configuration for your Pyramid application. The use setting is the
only setting required to be present in the [app:main] section. Its default value, egg:myproject,

372 Contents
The Pyramid Web Framework, Version 1.9.4

indicates that our myproject project contains the application that should be served. Other settings added to
this section are passed as keyword arguments to the function named main in our package’s __init__.
py module. You can provide startup-time configuration parameters to your application by adding more
settings to this section.

See also:

See Entry Points and PasteDeploy .ini Files for more information about the meaning of the use =
egg:myproject value in this section.

The pyramid.reload_templates setting in the [app:main] section is a Pyramid-specific setting


which is passed into the framework. If it exists, and its value is true, supported template changes will not
require an application restart to be detected. See Automatically Reloading Templates for more information.

The pyramid.reload_templates option should be turned off for production applications,


as template rendering is slowed when it is turned on.

The pyramid.includes setting in the [app:main] section tells Pyramid to ”include” configuration
from another package. In this case, the line pyramid.includes = pyramid_debugtoolbar
tells Pyramid to include configuration from the pyramid_debugtoolbar package. This turns on a
debugging panel in development mode which can be opened by clicking on the Pyramid logo on the top
right of the screen. Including the debug toolbar will also make it possible to interactively debug exceptions
when an error occurs.

Various other settings may exist in this section having to do with debugging or influencing runtime behavior
of a Pyramid application. See Environment Variables and .ini File Settings for more information about
these settings.

The name main in [app:main] signifies that this is the default application run by pserve when it is
invoked against this configuration file. The name main is a convention used by PasteDeploy signifying
that it is the default application.

The [server:main] section of the configuration file configures a WSGI server which listens on TCP
port 6543. It is configured to listen on localhost only (127.0.0.1).

The sections after # logging configuration represent Python’s standard library logging mod-
ule configuration for your application. These sections are passed to the logging module’s config file con-
figuration engine when the pserve or pshell commands are executed. The default configuration sends
application logging output to the standard error output of your terminal. For more information about log-
ging configuration, see Logging.

See the PasteDeploy documentation for more information about other types of things you can put into this
.ini file, such as other applications, middleware, and alternate WSGI server implementations.

0.3. Narrative Documentation 373


The Pyramid Web Framework, Version 1.9.4

production.ini

The production.ini file is a PasteDeploy configuration file with a purpose much like that of
development.ini. However, it disables the debug toolbar, and filters all log messages except those
above the WARN level. It also turns off template development options such that templates are not automat-
ically reloaded when changed, and turns off all debugging options. This file is appropriate to use instead
of development.ini when you put your application into production.

It’s important to use production.ini (and not development.ini) to benchmark your applica-
tion and put it into production. development.ini configures your system with a debug toolbar that
helps development, but the inclusion of this toolbar slows down page rendering times by over an order of
magnitude. The debug toolbar is also a potential security risk if you have it configured incorrectly.

MANIFEST.in

The MANIFEST.in file is a distutils configuration file which specifies the non-Python files that should
be included when a distribution of your Pyramid project is created when you run python setup.py
sdist. Due to the information contained in the default MANIFEST.in, an sdist of your Pyramid project
will include .txt files, .ini files, .rst files, graphics files, and template files, as well as .py files. See
https://docs.python.org/2/distutils/sourcedist.html#the-manifest-in-template for more information about
the syntax and usage of MANIFEST.in.

Without the presence of a MANIFEST.in file or without checking your source code into a version con-
trol repository, setup.py sdist places only Python source files (files ending with a .py extension)
into tarballs generated by python setup.py sdist. This means, for example, if your project was
not checked into a setuptools-compatible source control system, and your project directory didn’t con-
tain a MANIFEST.in file that told the sdist machinery to include *.pt files, the myproject/
templates/mytemplate.pt file would not be included in the generated tarball.

Projects generated by Pyramid cookiecutters include a default MANIFEST.in file. The MANIFEST.in
file contains declarations which tell it to include files like *.pt, *.css and *.js in the generated tarball.
If you include files with extensions other than the files named in the project’s MANIFEST.in and you
don’t make use of a setuptools-compatible version control system, you’ll need to edit the MANIFEST.in
file and include the statements necessary to include your new files. See https://docs.python.org/2/distutils/
sourcedist.html#principle for more information about how to do this.

You can also delete MANIFEST.in from your project and rely on a setuptools feature which simply causes
all files checked into a version control system to be put into the generated tarball. To allow this to happen,
check all the files that you’d like to be distributed along with your application’s Python files into Subversion.
After you do this, when you rerun setup.py sdist, all files checked into the version control system
will be included in the tarball. If you don’t use Subversion, and instead use a different version control
system, you may need to install a setuptools add-on such as setuptools-git or setuptools-hg
for this behavior to work properly.

374 Contents
The Pyramid Web Framework, Version 1.9.4

setup.py

The setup.py file is a setuptools setup file. It is meant to be used to define requirements for installing
dependencies for your package and testing, as well as distributing your application.

setup.py is the de facto standard which Python developers use to distribute their reusable code.
You can read more about setup.py files and their usage in the Python Packaging User Guide and Se-
tuptools documentation.

Our generated setup.py looks like this:

1 import os
2

3 from setuptools import setup, find_packages


4

5 here = os.path.abspath(os.path.dirname(__file__))
6 with open(os.path.join(here, 'README.txt')) as f:
7 README = f.read()
8 with open(os.path.join(here, 'CHANGES.txt')) as f:
9 CHANGES = f.read()
10

11 requires = [
12 'plaster_pastedeploy',
13 'pyramid',
14 'pyramid_jinja2',
15 'pyramid_debugtoolbar',
16 'waitress',
17 ]
18

19 tests_require = [
20 'WebTest >= 1.3.1', # py3 compat
21 'pytest',
22 'pytest-cov',
23 ]
24

25 setup(
26 name='myproject',
27 version='0.0',
28 description='MyProject',
(continues on next page)

0.3. Narrative Documentation 375


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


29 long_description=README + '\n\n' + CHANGES,
30 classifiers=[
31 'Programming Language :: Python',
32 'Framework :: Pyramid',
33 'Topic :: Internet :: WWW/HTTP',
34 'Topic :: Internet :: WWW/HTTP :: WSGI :: Application',
35 ],
36 author='',
37 author_email='',
38 url='',
39 keywords='web pyramid pylons',
40 packages=find_packages(),
41 include_package_data=True,
42 zip_safe=False,
43 extras_require={
44 'testing': tests_require,
45 },
46 install_requires=requires,
47 entry_points={
48 'paste.app_factory': [
49 'main = myproject:main',
50 ],
51 },
52 )

The setup.py file calls the setuptools setup function, which does various things depending on the
arguments passed to pip on the command line.

Within the arguments to this function call, information about your application is kept. While it’s beyond the
scope of this documentation to explain everything about setuptools setup files, we’ll provide a whirlwind
tour of what exists in this file in this section.

Your application’s name can be any string; it is specified in the name field. The version number is
specified in the version value. A short description is provided in the description field. The
long_description is conventionally the content of the README and CHANGES files appended to-
gether. The classifiers field is a list of Trove classifiers describing your application. author and
author_email are text fields which probably don’t need any description. url is a field that should
point at your application project’s URL (if any). packages=find_packages() causes all pack-
ages within the project to be found when packaging the application. include_package_data will
include non-Python files when the application is packaged if those files are checked into version control.
zip_safe=False indicates that this package is not safe to use as a zipped egg; instead it will always un-
pack as a directory, which is more convenient. install_requires indicates that this package depends

376 Contents
The Pyramid Web Framework, Version 1.9.4

on the pyramid package. extras_require is a Python dictionary that defines what is required to be
installed for running tests. We examined entry_points in our discussion of the development.ini
file; this file defines the main entry point that represents our project’s application.

Usually you only need to think about the contents of the setup.py file when distributing your application
to other people, when adding Python package dependencies, or when versioning your application for your
own use. For fun, you can try this command now:

$ $VENV/bin/python setup.py sdist

This will create a tarball of your application in a dist subdirectory named myproject-0.0.tar.gz.
You can send this tarball to other people who want to install and use your application.

The myproject Package

The myproject package lives inside the myproject project. It contains:

1. An __init__.py file signifies that this is a Python package. It also contains code that helps users
run the application, including a main function which is used as a entry point for commands such
as pserve, pshell, pviews, and others.

2. A templates directory, which contains Jinja2 (or other types of) templates.

3. A tests.py module, which contains unit test code for the application.

4. A views.py module, which contains view code for the application.

These are purely conventions established by the cookiecutter. Pyramid doesn’t insist that you name things
in any particular way. However, it’s generally a good idea to follow Pyramid standards for naming, so that
other Pyramid developers can get up to speed quickly on your code when you need help.

__init__.py

We need a small Python module that configures our application and which advertises an entry point for use
by our PasteDeploy .ini file. This is the file named __init__.py. The presence of an __init__.
py also informs Python that the directory which contains it is a package.

0.3. Narrative Documentation 377


The Pyramid Web Framework, Version 1.9.4

1 from pyramid.config import Configurator


2

4 def main(global_config, **settings):


5 """ This function returns a Pyramid WSGI application.
6 """
7 config = Configurator(settings=settings)
8 config.include('pyramid_jinja2')
9 config.add_static_view('static', 'static', cache_max_age=3600)
10 config.add_route('home', '/')
11 config.scan()
12 return config.make_wsgi_app()

1. Line 1 imports the Configurator class from pyramid.config that we use later.

2. Lines 4-12 define a function named main that returns a Pyramid WSGI application. This function
is meant to be called by the PasteDeploy framework as a result of running pserve.

Within this function, application configuration is performed.

Line 7 creates an instance of a Configurator.

Line 8 adds support for Jinja2 templating bindings, allowing us to specify renderers with the .
jinja2 extension.

Line 9 registers a static view, which will serve up the files from the myproject:static asset
specification (the static directory of the myproject package).

Line 10 adds a route to the configuration. This route is later used by a view in the views module.

Line 11 calls config.scan(), which picks up view registrations declared elsewhere in the pack-
age (in this case, in the views.py module).

Line 12 returns a WSGI application to the caller of the function (Pyramid’s pserve).

views.py

Much of the heavy lifting in a Pyramid application is done by view callables. A view callable is the main
tool of a Pyramid web application developer; it is a bit of code which accepts a request and which returns
a response.

378 Contents
The Pyramid Web Framework, Version 1.9.4

1 from pyramid.view import view_config


2

4 @view_config(route_name='home', renderer='templates/mytemplate.
,→jinja2')

5 def my_view(request):
6 return {'project': 'MyProject'}

Lines 4-6 define and register a view callable named my_view. The function named my_view is
decorated with a view_config decorator (which is processed by the config.scan() line in our
__init__.py). The view_config decorator asserts that this view be found when a route named home is
matched. In our case, because our __init__.py maps the route named home to the URL pattern /, this
route will match when a visitor visits the root URL. The view_config decorator also names a renderer,
which in this case is a template that will be used to render the result of the view callable. This particular
view declaration points at templates/mytemplate.pt, which is an asset specification that spec-
ifies the mytemplate.pt file within the templates directory of the myproject package. The
asset specification could have also been specified as myproject:templates/mytemplate.pt;
the leading package name and colon is optional. The template file pointed to is a Jinja2 template file
(templates/my_template.jinja2).

This view callable function is handed a single piece of information: the request. The request is an instance
of the WebOb Request class representing the browser’s request to our server.

This view is configured to invoke a renderer on a template. The dictionary the view returns (on line 6)
provides the value the renderer substitutes into the template when generating HTML. The renderer then
returns the HTML in a response.

Dictionaries provide values to templates.

When the application is run with the cookiecutter’s default development.ini configuration, logging is
set up to aid debugging. If an exception is raised, uncaught tracebacks are displayed after the startup mes-
sages on the console running the server. Also print() statements may be inserted into the application
for debugging to send output to this console.

development.ini has a setting that controls how templates are reloaded, pyramid.
reload_templates.

0.3. Narrative Documentation 379


The Pyramid Web Framework, Version 1.9.4

• When set to True (as in the cookiecutter development.ini), changed templates automatically
reload without a server restart. This is convenient while developing, but slows template rendering
speed.

• When set to False (the default value), changing templates requires a server restart to reload them.
Production applications should use pyramid.reload_templates = False.

See also:

See also Writing View Callables Which Use a Renderer for more information about how views, renderers,
and templates relate and cooperate.

See also:

Pyramid can also dynamically reload changed Python files. See also Reloading Code.

See also:

See also the The Debug Toolbar, which provides interactive access to your application’s internals and,
should an exception occur, allows interactive access to traceback execution stack frames from the Python
interpreter.

static

This directory contains static assets which support the layout.jinja2 template. It includes CSS and
images.

templates/layout.jinja2

This is the base layout content. It contains a single marker for content block. Other templates inherit its
content, providing layout for the web application. Its contents are too long to show here, but here is an
excerpt:

34 <div class="col-md-10">
35 {% block content %}
36 <p>No content</p>
37 {% endblock content %}
38 </div>

380 Contents
The Pyramid Web Framework, Version 1.9.4

templates/mytemplate.jinja2

This is the content Jinja2 template that exists in the project. It is referenced by the call to @view_config
as the renderer of the my_view view callable in the views.py file. See Writing View Callables
Which Use a Renderer for more information about renderers. It inherits (”extends”) the HTML provided
by layout.jinja2, replacing the content block with its own content.

1 {% extends "layout.jinja2" %}
2

3 {% block content %}
4 <div class="content">
5 <h1><span class="font-semi-bold">Pyramid</span> <span class=
,→"smaller">Starter project</span></h1>

6 <p class="lead">Welcome to <span class="font-normal">MyProject</


,→span>, a&nbsp;Pyramid application generated&nbsp;by<br><span␣

,→class="font-normal">Cookiecutter</span>.</p>

7 </div>
8 {% endblock content %}

Templates are accessed and used by view configurations and sometimes by view functions themselves. See
Using Templates Directly and Templates Used as Renderers via Configuration.

tests.py

The tests.py module includes tests for your application.

1 import unittest
2

3 from pyramid import testing


4

6 class ViewTests(unittest.TestCase):
7 def setUp(self):
8 self.config = testing.setUp()
9

10 def tearDown(self):
11 testing.tearDown()
12

13 def test_my_view(self):
(continues on next page)

0.3. Narrative Documentation 381


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


14 from .views import my_view
15 request = testing.DummyRequest()
16 info = my_view(request)
17 self.assertEqual(info['project'], 'MyProject')
18

19

20 class FunctionalTests(unittest.TestCase):
21 def setUp(self):
22 from myproject import main
23 app = main({})
24 from webtest import TestApp
25 self.testapp = TestApp(app)
26

27 def test_root(self):
28 res = self.testapp.get('/', status=200)
29 self.assertTrue(b'Pyramid' in res.body)

This sample tests.py file has one unit test and one functional test defined within it. These tests are
executed when you run py.test -q. You may add more tests here as you build your application. You
are not required to write tests to use Pyramid. This file is simply provided for convenience and example.

See Unit, Integration, and Functional Testing for more information about writing Pyramid unit tests.

Modifying Package Structure

It is best practice for your application’s code layout to not stray too much from accepted Pyramid cook-
iecutter defaults. If you refrain from changing things very much, other Pyramid coders will be able to more
quickly understand your application. However, the code layout choices made for you by a cookiecutter are
in no way magical or required. Despite the choices made for you by any cookiecutter, you can decide to
lay your code out any way you see fit.

For example, the configuration method named add_view() requires you to pass a dotted Python name or
a direct object reference as the class or function to be used as a view. By default, the starter cookiecutter
would have you add view functions to the views.py module in your package. However, you might be
more comfortable creating a views directory, and adding a single file for each view.

If your project package name was myproject and you wanted to arrange all your views in a Python
subpackage within the myproject package named views instead of within a single views.py file,
you might do the following.

382 Contents
The Pyramid Web Framework, Version 1.9.4

• Create a views directory inside your myproject package directory (the same directory which
holds views.py).

• Create a file within the new views directory named __init__.py. (It can be empty. This just
tells Python that the views directory is a package.)

• Move the content from the existing views.py file to a file inside the new views directory named,
say, blog.py. Because the templates directory remains in the myproject package, the tem-
plate asset specification values in blog.py must now be fully qualified with the project’s package
name (myproject:templates/blog.pt).

You can then continue to add view callable functions to the blog.py module, but you can also add
other .py files which contain view callable functions to the views directory. As long as you use the
@view_config directive to register views in conjunction with config.scan(), they will be picked
up automatically when the application is restarted.

Using the Interactive Shell

It is possible to use the pshell command to load a Python interpreter prompt with a similar configuration
as would be loaded if you were running your Pyramid application via pserve. This can be a useful
debugging tool. See The Interactive Shell for more details.

What Is This pserve Thing

The code generated by a Pyramid cookiecutter assumes that you will be using the pserve command to
start your application while you do development. pserve is a command that reads a PasteDeploy .ini
file (e.g., development.ini), and configures a server to serve a Pyramid application based on the data
in the file.

pserve is by no means the only way to start up and serve a Pyramid application. As we saw in Creating
Your First Pyramid Application, pserve needn’t be invoked at all to run a Pyramid application. The use of
pserve to run a Pyramid application is purely conventional based on the output of its cookiecutter. But we
strongly recommend using pserve while developing your application because many other convenience
introspection commands (such as pviews, prequest, proutes, and others) are also implemented
in terms of configuration availability of this .ini file format. It also configures Pyramid logging and
provides the --reload switch for convenient restarting of the server when code changes.

0.3. Narrative Documentation 383


The Pyramid Web Framework, Version 1.9.4

Using an Alternate WSGI Server

Pyramid cookiecutters generate projects which use the Waitress WSGI server. Waitress is a server that is
suited for development and light production usage. It’s not the fastest nor the most featureful WSGI server.
Instead, its main feature is that it works on all platforms that Pyramid needs to run on, making it a good
choice as a default server from the perspective of Pyramid’s developers.

Any WSGI server is capable of running a Pyramid application. But we suggest you stick with the default
server for development, and that you wait to investigate other server options until you’re ready to deploy
your application to production. Unless for some reason you need to develop on a non-local system, inves-
tigating alternate server options is usually a distraction until you’re ready to deploy. But we recommend
developing using the default configuration on a local system that you have complete control over; it will
provide the best development experience.

One popular production alternative to the default Waitress server is mod_wsgi. You can use mod_wsgi
to serve your Pyramid application using the Apache web server rather than any ”pure-Python” server like
Waitress. It is fast and featureful. See Running a Pyramid Application under mod_wsgi for details.

Another good production alternative is Green Unicorn (aka gunicorn). It’s faster than Waitress and
slightly easier to configure than mod_wsgi, although it depends, in its default configuration, on having a
buffering HTTP proxy in front of it. It does not, as of this writing, work on Windows.

Automatically Reloading Your Code

During development, it can be really useful to automatically have the webserver restart when you make
changes. pserve has a --reload switch to enable this. It uses the hupper package to enable this
behavior. When your code crashes, hupper will wait for another change or the SIGHUP signal before
restarting again.

inotify support

By default hupper will poll the filesystem for changes to all Python code. This can be pretty inefficient
in larger projects. To be nicer to your hard drive, you should install the watchdog package in development.
hupper will automatically use watchdog to more efficiently poll the filesystem.

384 Contents
The Pyramid Web Framework, Version 1.9.4

Monitoring Custom Files

By default, pserve --reload will monitor all imported Python code (everything in sys.modules)
as well as the config file passed to pserve (e.g., development.ini). You can instruct pserve to
watch other files for changes as well by defining a [pserve] section in your configuration file. For
example, let’s say your application loads the favicon.ico file at startup and stores it in memory to
efficiently serve it many times. When you change it, you want pserve to restart:

[pserve]
watch_files =
myproject/static/favicon.ico

Paths may be absolute or relative to the configuration file. They may also be an asset specification. These
paths are passed to hupper, which has some basic support for globbing. Acceptable glob patterns depend
on the version of Python being used.

0.3.6 Startup

When you cause a Pyramid application to start up in a console window, you’ll see something much like
this show up on the console:

$ $VENV/bin/pserve development.ini
Starting server in PID 16305.
Serving on http://localhost:6543
Serving on http://localhost:6543

This chapter explains what happens between the time you press the ”Return” key on your key-
board after typing pserve development.ini and the time the lines Serving on http://
localhost:6543 are output to your console.

The Startup Process

The easiest and best-documented way to start and serve a Pyramid application is to use the pserve
command against a PasteDeploy .ini file. This uses the .ini file to infer settings and starts a server
listening on a port. For the purposes of this discussion, we’ll assume that you are using this command to
run your Pyramid application.

Here’s a high-level time-ordered overview of what happens when you press return after running pserve
development.ini.

0.3. Narrative Documentation 385


The Pyramid Web Framework, Version 1.9.4

1. The pserve command is invoked under your shell with the argument development.ini. As
a result, Pyramid recognizes that it is meant to begin to run and serve an application using the
information contained within the development.ini file.

2. pserve passes the development.ini path to plaster which finds an available configuration
loader that recognizes the ini format.

3. plaster finds the plaster_pastedeploy library which binds the PasteDeploy library and re-
turns a parser that can understand the format.

4. The PasteDeploy finds a section named either [app:main], [pipeline:main], or


[composite:main] in the .ini file. This section represents the configuration of a WSGI
application that will be served. If you’re using a simple application (e.g., [app:main]), the
application’s paste.app_factory entry point will be named on the use= line within the
section’s configuration. If instead of a simple application, you’re using a WSGI pipeline (e.g., a
[pipeline:main] section), the application named on the ”last” element will refer to your Pyra-
mid application. If instead of a simple application or a pipeline, you’re using a ”composite” (e.g.,
[composite:main]), refer to the documentation for that particular composite to understand
how to make it refer to your Pyramid application. In most cases, a Pyramid application built from a
cookiecutter will have a single [app:main] section in it, and this will be the application served.

5. The framework finds all logging related configuration in the .ini file and uses it to configure
the Python standard library logging system for this application. See Logging Configuration for more
information.

6. The application’s constructor named by the entry point referenced on the use= line of the section
representing your Pyramid application is passed the key/value parameters mentioned within the sec-
tion in which it’s defined. The constructor is meant to return a router instance, which is a WSGI
application.

For Pyramid applications, the constructor will be a function named main in the __init__.py
file within the package in which your application lives. If this function succeeds, it will return a
Pyramid router instance. Here’s the contents of an example __init__.py module:

1 from pyramid.config import Configurator


2

4 def main(global_config, **settings):


5 """ This function returns a Pyramid WSGI application.
6 """
7 config = Configurator(settings=settings)
8 config.include('pyramid_jinja2')
(continues on next page)

386 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


9 config.add_static_view('static', 'static', cache_max_
,→age=3600)

10 config.add_route('home', '/')
11 config.scan()
12 return config.make_wsgi_app()

Note that the constructor function accepts a global_config argument, which is a dictionary of
key/value pairs mentioned in the [DEFAULT] section of an .ini file (if [DEFAULT] is present).
It also accepts a **settings argument, which collects another set of arbitrary key/value pairs.
The arbitrary key/value pairs received by this function in **settings will be composed of all
the key/value pairs that are present in the [app:main] section (except for the use= setting) when
this function is called when you run pserve.

Our generated development.ini file looks like so:

1 ###
2 # app configuration
3 # https://docs.pylonsproject.org/projects/pyramid/en/latest/
,→narr/environment.html

4 ###
5

6 [app:main]
7 use = egg:myproject
8

9 pyramid.reload_templates = true
10 pyramid.debug_authorization = false
11 pyramid.debug_notfound = false
12 pyramid.debug_routematch = false
13 pyramid.default_locale_name = en
14 pyramid.includes =
15 pyramid_debugtoolbar
16

17 # By default, the toolbar only appears for clients from IP␣


,→addresses

18 # '127.0.0.1' and '::1'.


19 # debugtoolbar.hosts = 127.0.0.1 ::1
20

21 ###
22 # wsgi server configuration
23 ###
24

(continues on next page)

0.3. Narrative Documentation 387


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


25 [server:main]
26 use = egg:waitress#main
27 listen = localhost:6543
28

29 ###
30 # logging configuration
31 # https://docs.pylonsproject.org/projects/pyramid/en/latest/
,→narr/logging.html

32 ###
33

34 [loggers]
35 keys = root, myproject
36

37 [handlers]
38 keys = console
39

40 [formatters]
41 keys = generic
42

43 [logger_root]
44 level = INFO
45 handlers = console
46

47 [logger_myproject]
48 level = DEBUG
49 handlers =
50 qualname = myproject
51

52 [handler_console]
53 class = StreamHandler
54 args = (sys.stderr,)
55 level = NOTSET
56 formatter = generic
57

58 [formatter_generic]
59 format = %(asctime)s %(levelname)-5.5s [%(name)s:%(lineno)s][
,→%(threadName)s] %(message)s

In this case, the myproject.__init__:main function referred to by the entry point


URI egg:myproject (see development.ini for more information about entry point
URIs, and how they relate to callables) will receive the key/value pairs {pyramid.
reload_templates = true, pyramid.debug_authorization = false,

388 Contents
The Pyramid Web Framework, Version 1.9.4

pyramid.debug_notfound = false, pyramid.debug_routematch =


false, pyramid.default_locale_name = en, and pyramid.includes =
pyramid_debugtoolbar}. See Environment Variables and .ini File Settings for the meanings
of these keys.
7. The main function first constructs a Configurator instance, passing the settings dictionary
captured via the **settings kwarg as its settings argument.
The settings dictionary contains all the options in the [app:main] section of our .ini file ex-
cept the use option (which is internal to PasteDeploy) such as pyramid.reload_templates,
pyramid.debug_authorization, etc.
8. The main function then calls various methods on the instance of the class Configurator created
in the previous step. The intent of calling these methods is to populate an application registry, which
represents the Pyramid configuration related to the application.
9. The make_wsgi_app() method is called. The result is a router instance. The router is associated
with the application registry implied by the configurator previously populated by other methods run
against the Configurator. The router is a WSGI application.
10. An ApplicationCreated event is emitted (see Using Events for more information about
events).
11. Assuming there were no errors, the main function in myproject returns the router instance cre-
ated by pyramid.config.Configurator.make_wsgi_app() back to pserve. As far
as pserve is concerned, it is ”just another WSGI application”.
12. pserve starts the WSGI server defined within the [server:main] section. In our case, this is
the Waitress server (use = egg:waitress#main), and it will listen on all interfaces on port
6543 for both IPv4 and IPv6 (listen = localhost:6543). The server code itself is what
prints Serving on http://localhost:6543. The server serves the application, and the
application is running, waiting to receive requests.
See also:
Logging configuration is described in the Logging chapter. There, in Request Logging with Paste’s
TransLogger, you will also find an example of how to configure middleware to add pre-packaged func-
tionality to your application.

Deployment Settings

Note that an augmented version of the values passed as **settings to the Configurator constructor
will be available in Pyramid view callable code as request.registry.settings. You can create
objects you wish to access later from view code, and put them into the dictionary you pass to the configu-
rator as settings. They will then be present in the request.registry.settings dictionary at
application runtime.

0.3. Narrative Documentation 389


The Pyramid Web Framework, Version 1.9.4

390 Contents
The Pyramid Web Framework, Version 1.9.4

0.3.7 Request Processing

0.3. Narrative Documentation 391


The Pyramid Web Framework, Version 1.9.4

Once a Pyramid application is up and running, it is ready to accept requests and return responses. What
happens from the time a WSGI request enters a Pyramid application through to the point that Pyramid
hands off a response back to WSGI for upstream processing?

1. A user initiates a request from their browser to the hostname and port number of the WSGI server
used by the Pyramid application.

2. The WSGI server used by the Pyramid application passes the WSGI environment to the __call__
method of the Pyramid router object.

3. A request object is created based on the WSGI environment.

4. The application registry and the request object created in the last step are pushed on to the thread
local stack that Pyramid uses to allow the functions named get_current_request() and
get_current_registry() to work.

5. A NewRequest event is sent to any subscribers.

6. If any route has been defined within application configuration, the Pyramid router calls a URL
dispatch ”route mapper.” The job of the mapper is to examine the request to determine whether
any user-defined route matches the current WSGI environment. The router passes the request as an
argument to the mapper.

7. If any route matches, the route mapper adds the attributes matchdict and matched_route to
the request object. The former contains a dictionary representing the matched dynamic elements of
the request’s PATH_INFO value, and the latter contains the IRoute object representing the route
which matched.

8. A BeforeTraversal event is sent to any subscribers.

9. Continuing, if any route matches, the root object associated with the found route is generated. If the
route configuration which matched has an associated factory argument, then this factory is used
to generate the root object; otherwise a default root factory is used.

However, if no route matches, and if a root_factory argument was passed to the Configurator
constructor, that callable is used to generate the root object. If the root_factory argument
passed to the Configurator constructor was None, a default root factory is used to generate a root
object.

10. The Pyramid router calls a ”traverser” function with the root object and the request. The traverser
function attempts to traverse the root object (using any existing __getitem__ on the root object
and subobjects) to find a context. If the root object has no __getitem__ method, the root itself
is assumed to be the context. The exact traversal algorithm is described in Traversal. The traverser
function returns a dictionary, which contains a context and a view name as well as other ancillary
information.

392 Contents
The Pyramid Web Framework, Version 1.9.4

11. The request is decorated with various names returned from the traverser (such as context,
view_name, and so forth), so they can be accessed via, for example, request.context within
view code.

12. A ContextFound event is sent to any subscribers.

13. Pyramid looks up a view callable using the context, the request, and the view name. If a view
callable doesn’t exist for this combination of objects (based on the type of the context, the type
of the request, and the value of the view name, and any predicate attributes applied to the view
configuration), Pyramid raises a HTTPNotFound exception, which is meant to be caught by a
surrounding exception view.

14. If a view callable was found, Pyramid attempts to call it. If an authorization policy is in use, and the
view configuration is protected by a permission, Pyramid determines whether the view callable being
asked for can be executed by the requesting user based on credential information in the request and
security information attached to the context. If the view execution is allowed, Pyramid calls the view
callable to obtain a response. If view execution is forbidden, Pyramid raises a HTTPForbidden
exception.

15. If any exception is raised within a root factory, by traversal, by a view callable, or by Pyramid itself
(such as when it raises HTTPNotFound or HTTPForbidden), the router catches the exception,
and attaches it to the request as the exception attribute. It then attempts to find a exception view
for the exception that was caught. If it finds an exception view callable, that callable is called, and is
presumed to generate a response. If an exception view that matches the exception cannot be found,
the exception is reraised.

16. The following steps occur only when a response could be successfully generated by a normal view
callable or an exception view callable. Pyramid will attempt to execute any response callback func-
tions attached via add_response_callback(). A NewResponse event is then sent to any
subscribers. The response object’s __call__ method is then used to generate a WSGI response.
The response is sent back to the upstream WSGI server.

17. Pyramid will attempt to execute any finished callback functions attached via
add_finished_callback().

18. The thread local stack is popped.

0.3. Narrative Documentation 393


The Pyramid Web Framework, Version 1.9.4

394 Contents
The Pyramid Web Framework, Version 1.9.4

This is a very high-level overview that leaves out various details. For more detail about subsystems invoked
by the Pyramid router, such as traversal, URL dispatch, views, and event processing, see URL Dispatch,
Views, and Using Events.

0.3.8 URL Dispatch

URL dispatch provides a simple way to map URLs to view code using a simple pattern matching language.
An ordered set of patterns is checked one by one. If one of the patterns matches the path information
associated with a request, a particular view callable is invoked. A view callable is a specific bit of code,
defined in your application, that receives the request and returns a response object.

High-Level Operational Overview

If any route configuration is present in an application, the Pyramid Router checks every incoming request
against an ordered set of URL matching patterns present in a route map.

If any route pattern matches the information in the request, Pyramid will invoke the view lookup process
to find a matching view.

If no route pattern in the route map matches the information in the request provided in your application,
Pyramid will fail over to using traversal to perform resource location and view lookup.

Route Configuration

Route configuration is the act of adding a new route to an application. A route has a name, which acts as an
identifier to be used for URL generation. The name also allows developers to associate a view configuration
with the route. A route also has a pattern, meant to match against the PATH_INFO portion of a URL (the
portion following the scheme and port, e.g., /foo/bar in the URL http://localhost:8080/
foo/bar). It also optionally has a factory and a set of route predicate attributes.

Configuring a Route to Match a View

The pyramid.config.Configurator.add_route() method adds a single route configuration


to the application registry. Here’s an example:

0.3. Narrative Documentation 395


The Pyramid Web Framework, Version 1.9.4

# "config" below is presumed to be an instance of the


# pyramid.config.Configurator class; "myview" is assumed
# to be a "view callable" function
from views import myview
config.add_route('myroute', '/prefix/{one}/{two}')
config.add_view(myview, route_name='myroute')

When a view callable added to the configuration by way of add_view() becomes associated with a route
via its route_name predicate, that view callable will always be found and invoked when the associated
route pattern matches during a request.

More commonly, you will not use any add_view statements in your project’s ”setup” code. You will
instead use add_route statements, and use a scan to associate view callables with routes. For example,
if this is a portion of your project’s __init__.py:

config.add_route('myroute', '/prefix/{one}/{two}')
config.scan('mypackage')

Note that we don’t call add_view() in this setup code. However, the above scan execution config.
scan('mypackage') will pick up each configuration decoration, including any objects decorated with
the pyramid.view.view_config decorator in the mypackage Python package. For example, if
you have a views.py in your package, a scan will pick up any of its configuration decorators, so we can
add one there that references myroute as a route_name parameter:

from pyramid.view import view_config


from pyramid.response import Response

@view_config(route_name='myroute')
def myview(request):
return Response('OK')

The above combination of add_route and scan is completely equivalent to using the previous combi-
nation of add_route and add_view.

Route Pattern Syntax

The syntax of the pattern matching language used by Pyramid URL dispatch in the pattern argument is
straightforward. It is close to that of the Routes system used by Pylons.

396 Contents
The Pyramid Web Framework, Version 1.9.4

The pattern used in route configuration may start with a slash character. If the pattern does not start with
a slash character, an implicit slash will be prepended to it at matching time. For example, the following
patterns are equivalent:

{foo}/bar/baz

and:

/{foo}/bar/baz

If a pattern is a valid URL it won’t be matched against an incoming request. Instead it can be useful for
generating external URLs. See External routes for details.

A pattern segment (an individual item between / characters in the pattern) may either be a literal string (e.g.,
foo) or it may be a replacement marker (e.g., {foo}), or a certain combination of both. A replacement
marker does not need to be preceded by a / character.

A replacement marker is in the format {name}, where this means ”accept any characters up to the next
slash character and use this as the name matchdict value.”

A replacement marker in a pattern must begin with an uppercase or lowercase ASCII letter or an under-
score, and can be composed only of uppercase or lowercase ASCII letters, underscores, and numbers. For
example: a, a_b, _b, and b9 are all valid replacement marker names, but 0a is not.

Changed in version 1.2: A replacement marker could not start with an underscore until Pyramid 1.2.
Previous versions required that the replacement marker start with an uppercase or lowercase letter.

A matchdict is the dictionary representing the dynamic parts extracted from a URL based on the routing
pattern. It is available as request.matchdict. For example, the following pattern defines one literal
segment (foo) and two replacement markers (baz, and bar):

foo/{baz}/{bar}

The above pattern will match these URLs, generating the following matchdicts:

foo/1/2 -> {'baz':u'1', 'bar':u'2'}


foo/abc/def -> {'baz':u'abc', 'bar':u'def'}

It will not match the following patterns however:

0.3. Narrative Documentation 397


The Pyramid Web Framework, Version 1.9.4

foo/1/2/ -> No match (trailing slash)


bar/abc/def -> First segment literal mismatch

The match for a segment replacement marker in a segment will be done only up to the first non-
alphanumeric character in the segment in the pattern. So, for instance, if this route pattern was used:

foo/{name}.html

The literal path /foo/biz.html will match the above route pattern, and the match result will be
{'name':u'biz'}. However, the literal path /foo/biz will not match, because it does not con-
tain a literal .html at the end of the segment represented by {name}.html (it only contains biz, not
biz.html).

To capture both segments, two replacement markers can be used:

foo/{name}.{ext}

The literal path /foo/biz.html will match the above route pattern, and the match result will be
{'name': 'biz', 'ext': 'html'}. This occurs because there is a literal part of . (period)
between the two replacement markers {name} and {ext}.

Replacement markers can optionally specify a regular expression which will be used to decide whether
a path segment should match the marker. To specify that a replacement marker should match only a
specific set of characters as defined by a regular expression, you must use a slightly extended form of
replacement marker syntax. Within braces, the replacement marker name must be followed by a colon, then
directly thereafter, the regular expression. The default regular expression associated with a replacement
marker [^/]+ matches one or more characters which are not a slash. For example, under the hood, the
replacement marker {foo} can more verbosely be spelled as {foo:[^/]+}. You can change this to
be an arbitrary regular expression to match an arbitrary sequence of characters, such as {foo:\d+} to
match only digits.

It is possible to use two replacement markers without any literal characters between them, for instance
/{foo}{bar}. However, this would be a nonsensical pattern without specifying a custom regular ex-
pression to restrict what each marker captures.

Segments must contain at least one character in order to match a segment replacement marker. For example,
for the URL /abc/:

• /abc/{foo} will not match.

398 Contents
The Pyramid Web Framework, Version 1.9.4

• /{foo}/ will match.

Note that values representing matched path segments will be URL-unquoted and decoded from UTF-8
into Unicode within the matchdict. So for instance, the following pattern:

foo/{bar}

When matching the following URL:

http://example.com/foo/La%20Pe%C3%B1a

The matchdict will look like so (the value is URL-decoded / UTF-8 decoded):

{'bar':u'La Pe\xf1a'}

Literal strings in the path segment should represent the decoded value of the PATH_INFO provided to
Pyramid. You don’t want to use a URL-encoded value or a bytestring representing the literal encoded as
UTF-8 in the pattern. For example, rather than this:

/Foo%20Bar/{baz}

You’ll want to use something like this:

/Foo Bar/{baz}

For patterns that contain ”high-order” characters in its literals, you’ll want to use a Unicode value as the
pattern as opposed to any URL-encoded or UTF-8-encoded value. For example, you might be tempted to
use a bytestring pattern like this:

/La Pe\xc3\xb1a/{x}

But this will either cause an error at startup time or it won’t match properly. You’ll want to use a Unicode
value as the pattern instead rather than raw bytestring escapes. You can use a high-order Unicode value
as the pattern by using Python source file encoding plus the ”real” character in the Unicode pattern in the
source, like so:

0.3. Narrative Documentation 399


The Pyramid Web Framework, Version 1.9.4

/La Peña/{x}

Or you can ignore source file encoding and use equivalent Unicode escape characters in the pattern.

/La Pe\xf1a/{x}

Dynamic segment names cannot contain high-order characters, so this applies only to literals in the pattern.

If the pattern has a * in it, the name which follows it is considered a ”remainder match”. A remainder
match must come at the end of the pattern. Unlike segment replacement markers, it does not need to be
preceded by a slash. For example:

foo/{baz}/{bar}*fizzle

The above pattern will match these URLs, generating the following matchdicts:

foo/1/2/ ->
{'baz':u'1', 'bar':u'2', 'fizzle':()}

foo/abc/def/a/b/c ->
{'baz':u'abc', 'bar':u'def', 'fizzle':(u'a', u'b', u'c')}

Note that when a *stararg remainder match is matched, the value put into the matchdict is turned into
a tuple of path segments representing the remainder of the path. These path segments are URL-unquoted
and decoded from UTF-8 into Unicode. For example, for the following pattern:

foo/*fizzle

When matching the following path:

/foo/La%20Pe%C3%B1a/a/b/c

Will generate the following matchdict:

{'fizzle':(u'La Pe\xf1a', u'a', u'b', u'c')}

By default, the *stararg will parse the remainder sections into a tuple split by segment. Changing the
regular expression used to match a marker can also capture the remainder of the URL, for example:

400 Contents
The Pyramid Web Framework, Version 1.9.4

foo/{baz}/{bar}{fizzle:.*}

The above pattern will match these URLs, generating the following matchdicts:

foo/1/2/ -> {'baz':u'1', 'bar':u'2', 'fizzle':u''}


foo/abc/def/a/b/c -> {'baz':u'abc', 'bar':u'def', 'fizzle': u'a/b/c
,→'}

This occurs because the default regular expression for a marker is [^/]+ which will match everything up
to the first /, while {fizzle:.*} will result in a regular expression match of .* capturing the remainder
into a single value.

Route Declaration Ordering

Route configuration declarations are evaluated in a specific order when a request enters the system. As a
result, the order of route configuration declarations is very important. The order in which route declarations
are evaluated is the order in which they are added to the application at startup time. (This is unlike a
different way of mapping URLs to code that Pyramid provides, named traversal, which does not depend
on pattern ordering).

For routes added via the add_route method, the order that routes are evaluated is the order in which
they are added to the configuration imperatively.

For example, route configuration statements with the following patterns might be added in the following
order:

members/{def}
members/abc

In such a configuration, the members/abc pattern would never be matched. This is because the match
ordering will always match members/{def} first; the route configuration with members/abc will
never be evaluated.

0.3. Narrative Documentation 401


The Pyramid Web Framework, Version 1.9.4

Route Configuration Arguments

Route configuration add_route statements may specify a large number of arguments. They are docu-
mented as part of the API documentation at pyramid.config.Configurator.add_route().

Many of these arguments are route predicate arguments. A route predicate argument specifies that some
aspect of the request must be true for the associated route to be considered a match during the route match-
ing process. Examples of route predicate arguments are pattern, xhr, and request_method.

Other arguments are name and factory. These arguments represent neither predicates nor view con-
figuration information.

Route Matching

The main purpose of route configuration is to match (or not match) the PATH_INFO present in the WSGI
environment provided during a request against a URL path pattern. PATH_INFO represents the path
portion of the URL that was requested.

The way that Pyramid does this is very simple. When a request enters the system, for each route config-
uration declaration present in the system, Pyramid checks the request’s PATH_INFO against the pattern
declared. This checking happens in the order that the routes were declared via pyramid.config.
Configurator.add_route().

When a route configuration is declared, it may contain route predicate arguments. All route predicates
associated with a route declaration must be True for the route configuration to be used for a given request
during a check. If any predicate in the set of route predicate arguments provided to a route configuration
returns False during a check, that route is skipped and route matching continues through the ordered set
of routes.

If any route matches, the route matching process stops and the view lookup subsystem takes over to find
the most reasonable view callable for the matched route. Most often, there’s only one view that will
match (a view configured with a route_name argument matching the matched route). To gain a better
understanding of how routes and views are associated in a real application, you can use the pviews
command, as documented in Displaying Matching Views for a Given URL.

If no route matches after all route patterns are exhausted, Pyramid falls back to traversal to do resource
location and view lookup.

402 Contents
The Pyramid Web Framework, Version 1.9.4

The Matchdict

When the URL pattern associated with a particular route configuration is matched by a request, a dictionary
named matchdict is added as an attribute of the request object. Thus, request.matchdict will
contain the values that match replacement patterns in the pattern element. The keys in a matchdict will
be strings. The values will be Unicode objects.

If no route URL pattern matches, the matchdict object attached to the request will be None.

The Matched Route

When the URL pattern associated with a particular route configuration is matched by a request, an
object named matched_route is added as an attribute of the request object. Thus, request.
matched_route will be an object implementing the IRoute interface which matched the request.
The most useful attribute of the route object is name, which is the name of the route that matched.

If no route URL pattern matches, the matched_route object attached to the request will be None.

Routing Examples

Let’s check out some examples of how route configuration statements might be commonly declared, and
what will happen if they are matched by the information present in a request.

Example 1

The simplest route declaration which configures a route match to directly result in a particular view callable
being invoked:

1 config.add_route('idea', 'site/{id}')
2 config.scan()

0.3. Narrative Documentation 403


The Pyramid Web Framework, Version 1.9.4

When a route configuration with a view attribute is added to the system, and an incoming request matches
the pattern of the route configuration, the view callable named as the view attribute of the route config-
uration will be invoked.

Recall that the @view_config is equivalent to calling config.add_view, because the config.
scan() call will import mypackage.views, shown below, and execute config.add_view under
the hood. Each view then maps the route name to the matching view callable. In the case of the above
example, when the URL of a request matches /site/{id}, the view callable at the Python dotted path
name mypackage.views.site_view will be called with the request. In other words, we’ve associ-
ated a view callable directly with a route pattern.

When the /site/{id} route pattern matches during a request, the site_view view callable is in-
voked with that request as its sole argument. When this route matches, a matchdict will be gener-
ated and attached to the request as request.matchdict. If the specific URL matched is /site/
1, the matchdict will be a dictionary with a single key, id; the value will be the string '1', ex.:
{'id':'1'}.

The mypackage.views module referred to above might look like so:

1 from pyramid.view import view_config


2 from pyramid.response import Response
3

4 @view_config(route_name='idea')
5 def site_view(request):
6 return Response(request.matchdict['id'])

The view has access to the matchdict directly via the request, and can access variables within it that match
keys present as a result of the route pattern.

See Views, and View Configuration for more information about views.

Example 2

Below is an example of a more complicated set of route statements you might add to your application:

1 config.add_route('idea', 'ideas/{idea}')
2 config.add_route('user', 'users/{user}')
3 config.add_route('tag', 'tags/{tag}')
4 config.scan()

Here is an example of a corresponding mypackage.views module:

404 Contents
The Pyramid Web Framework, Version 1.9.4

1 from pyramid.view import view_config


2 from pyramid.response import Response
3

4 @view_config(route_name='idea')
5 def idea_view(request):
6 return Response(request.matchdict['idea'])
7

8 @view_config(route_name='user')
9 def user_view(request):
10 user = request.matchdict['user']
11 return Response(u'The user is {}.'.format(user))
12

13 @view_config(route_name='tag')
14 def tag_view(request):
15 tag = request.matchdict['tag']
16 return Response(u'The tag is {}.'.format(tag))

The above configuration will allow Pyramid to service URLs in these forms:

/ideas/{idea}
/users/{user}
/tags/{tag}

• When a URL matches the pattern /ideas/{idea}, the view callable available at the dotted
Python pathname mypackage.views.idea_view will be called. For the specific URL /
ideas/1, the matchdict generated and attached to the request will consist of {'idea':'1'}.

• When a URL matches the pattern /users/{user}, the view callable available at the dotted
Python pathname mypackage.views.user_view will be called. For the specific URL /
users/1, the matchdict generated and attached to the request will consist of {'user':'1'}.

• When a URL matches the pattern /tags/{tag}, the view callable available at the dotted Python
pathname mypackage.views.tag_view will be called. For the specific URL /tags/1, the
matchdict generated and attached to the request will consist of {'tag':'1'}.

In this example we’ve again associated each of our routes with a view callable directly. In all cases, the
request, which will have a matchdict attribute detailing the information found in the URL by the process
will be passed to the view callable.

0.3. Narrative Documentation 405


The Pyramid Web Framework, Version 1.9.4

Example 3

The context resource object passed in to a view found as the result of URL dispatch will, by default, be
an instance of the object returned by the root factory configured at startup time (the root_factory
argument to the Configurator used to configure the application).

You can override this behavior by passing in a factory argument to the add_route() method for a
particular route. The factory should be a callable that accepts a request and returns an instance of a
class that will be the context resource used by the view.

An example of using a route with a factory:

1 config.add_route('idea', 'ideas/{idea}', factory='myproject.


,→resources.Idea')

2 config.scan()

The above route will manufacture an Idea resource as a context, assuming that mypackage.
resources.Idea resolves to a class that accepts a request in its __init__. For example:

1 class Idea(object):
2 def __init__(self, request):
3 pass

In a more complicated application, this root factory might be a class representing a SQLAlchemy model.
The view mypackage.views.idea_view might look like this:

1 @view_config(route_name='idea')
2 def idea_view(request):
3 idea = request.context
4 return Response(idea)

Here, request.context is an instance of Idea. If indeed the resource object is a SQLAlchemy


model, you do not even have to perform a query in the view callable, since you have access to the resource
via request.context.

See Route Factories for more details about how to use route factories.

Matching the Root URL

It’s not entirely obvious how to use a route pattern to match the root URL (”/”). To do so, give the empty
string as a pattern in a call to add_route():

406 Contents
The Pyramid Web Framework, Version 1.9.4

1 config.add_route('root', '')

Or provide the literal string / as the pattern:

1 config.add_route('root', '/')

Generating Route URLs

Use the pyramid.request.Request.route_url() method to generate URLs based on route


patterns. For example, if you’ve configured a route with the name ”foo” and the pattern ”{a}/{b}/{c}”,
you might do this.

1 url = request.route_url('foo', a='1', b='2', c='3')

This would return something like the string http://example.com/1/2/3 (at least if the current
protocol and hostname implied http://example.com).

To generate only the path portion of a URL from a route, use the pyramid.request.Request.
route_path() API instead of route_url().

url = request.route_path('foo', a='1', b='2', c='3')

This will return the string /1/2/3 rather than a full URL.

Replacement values passed to route_url or route_path must be Unicode or bytestrings encoded


in UTF-8. One exception to this rule exists: if you’re trying to replace a ”remainder” match value (a
*stararg replacement value), the value may be a tuple containing Unicode strings or UTF-8 strings.

Note that URLs and paths generated by route_url and route_path are always URL-quoted string
types (they contain no non-ASCII characters). Therefore, if you’ve added a route like so:

config.add_route('la', u'/La Peña/{city}')

And you later generate a URL using route_path or route_url like so:

0.3. Narrative Documentation 407


The Pyramid Web Framework, Version 1.9.4

url = request.route_path('la', city=u'Québec')

You will wind up with the path encoded to UTF-8 and URL-quoted like so:

/La%20Pe%C3%B1a/Qu%C3%A9bec

If you have a *stararg remainder dynamic part of your route pattern:

config.add_route('abc', 'a/b/c/*foo')

And you later generate a URL using route_path or route_url using a string as the replacement
value:

url = request.route_path('abc', foo=u'Québec/biz')

The value you pass will be URL-quoted except for embedded slashes in the result:

/a/b/c/Qu%C3%A9bec/biz

You can get a similar result by passing a tuple composed of path elements:

url = request.route_path('abc', foo=(u'Québec', u'biz'))

Each value in the tuple will be URL-quoted and joined by slashes in this case:

/a/b/c/Qu%C3%A9bec/biz

Static Routes

Routes may be added with a static keyword argument. For example:

1 config = Configurator()
2 config.add_route('page', '/page/{action}', static=True)

408 Contents
The Pyramid Web Framework, Version 1.9.4

Routes added with a True static keyword argument will never be considered for matching at request
time. Static routes are useful for URL generation purposes only. As a result, it is usually nonsensical to
provide other non-name and non-pattern arguments to add_route() when static is passed as
True, as none of the other arguments will ever be employed. A single exception to this rule is use of the
pregenerator argument, which is not ignored when static is True.
External routes are implicitly static.
New in version 1.1: the static argument to add_route().

External Routes

New in version 1.5.


Route patterns that are valid URLs, are treated as external routes. Like static routes they are useful for
URL generation purposes only and are never considered for matching at request time.

1 >>> config = Configurator()


2 >>> config.add_route('youtube', 'https://youtube.com/watch/{video_
,→id}')

3 ...
4 >>> request.route_url('youtube', video_id='oHg5SJYRHA0')
5 >>> "https://youtube.com/watch/oHg5SJYRHA0"

Most pattern replacements and calls to pyramid.request.Request.route_url() will work as


expected. However, calls to pyramid.request.Request.route_path() against external pat-
terns will raise an exception, and passing _app_url to route_url() to generate a URL against a
route that has an external pattern will also raise an exception.

Redirecting to Slash-Appended Routes

For behavior like Django’s APPEND_SLASH=True, use the append_slash argument to pyramid.
config.Configurator.add_notfound_view() or the equivalent append_slash argument
to the pyramid.view.notfound_view_config decorator.
Adding append_slash=True is a way to automatically redirect requests where the URL lacks a trail-
ing slash, but requires one to match the proper route. When configured, along with at least one other
route in your application, this view will be invoked if the value of PATH_INFO does not already end
in a slash, and if the value of PATH_INFO plus a slash matches any route’s pattern. In this case it
does an HTTP redirect to the slash-appended PATH_INFO. In addition you may pass anything that im-
plements pyramid.interfaces.IResponse which will then be used in place of the default class
(pyramid.httpexceptions.HTTPFound).
Let’s use an example. If the following routes are configured in your application:

0.3. Narrative Documentation 409


The Pyramid Web Framework, Version 1.9.4

1 from pyramid.httpexceptions import HTTPNotFound


2

3 def notfound(request):
4 return HTTPNotFound()
5

6 def no_slash(request):
7 return Response('No slash')
8

9 def has_slash(request):
10 return Response('Has slash')
11

12 def main(g, **settings):


13 config = Configurator()
14 config.add_route('noslash', 'no_slash')
15 config.add_route('hasslash', 'has_slash/')
16 config.add_view(no_slash, route_name='noslash')
17 config.add_view(has_slash, route_name='hasslash')
18 config.add_notfound_view(notfound, append_slash=True)

If a request enters the application with the PATH_INFO value of /no_slash, the first route will match
and the browser will show ”No slash”. However, if a request enters the application with the PATH_INFO
value of /no_slash/, no route will match, and the slash-appending not found view will not find a
matching route with an appended slash. As a result, the notfound view will be called and it will return
a ”Not found” body.

If a request enters the application with the PATH_INFO value of /has_slash/, the second route will
match. If a request enters the application with the PATH_INFO value of /has_slash, a route will be
found by the slash-appending Not Found View. An HTTP redirect to /has_slash/ will be returned to
the user’s browser. As a result, the notfound view will never actually be called.

The following application uses the pyramid.view.notfound_view_config and pyramid.


view.view_config decorators and a scan to do exactly the same job:

1 from pyramid.httpexceptions import HTTPNotFound


2 from pyramid.view import notfound_view_config, view_config
3

4 @notfound_view_config(append_slash=True)
5 def notfound(request):
6 return HTTPNotFound()
7

8 @view_config(route_name='noslash')
(continues on next page)

410 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


9 def no_slash(request):
10 return Response('No slash')
11

12 @view_config(route_name='hasslash')
13 def has_slash(request):
14 return Response('Has slash')
15

16 def main(g, **settings):


17 config = Configurator()
18 config.add_route('noslash', 'no_slash')
19 config.add_route('hasslash', 'has_slash/')
20 config.scan()

You should not rely on this mechanism to redirect POST requests. The redirect of the slash-
appending Not Found View will turn a POST request into a GET, losing any POST data in the original
request.

See pyramid.view and Changing the Not Found View for a more general description of how to configure a
view and/or a Not Found View.

Debugging Route Matching

It’s useful to be able to take a peek under the hood when requests that enter your application aren’t matching
your routes as you expect them to. To debug route matching, use the PYRAMID_DEBUG_ROUTEMATCH
environment variable or the pyramid.debug_routematch configuration file setting (set either to
true). Details of the route matching decision for a particular request to the Pyramid application will be
printed to the stderr of the console which you started the application from. For example:

1 $ PYRAMID_DEBUG_ROUTEMATCH=true $VENV/bin/pserve development.ini


2 Starting server in PID 13586.
3 serving on 0.0.0.0:6543 view at http://127.0.0.1:6543
4 2010-12-16 14:45:19,956 no route matched for url \
5 http://localhost:6543/wontmatch
6 2010-12-16 14:45:20,010 no route matched for url \
7 http://localhost:6543/favicon.ico
8 2010-12-16 14:41:52,084 route matched for url \
9 http://localhost:6543/static/logo.png; \
10 route_name: 'static/', ....

0.3. Narrative Documentation 411


The Pyramid Web Framework, Version 1.9.4

See Environment Variables and .ini File Settings for more information about how and where to set these
values.

You can also use the proutes command to see a display of all the routes configured in your application.
For more information, see Displaying All Application Routes.

Using a Route Prefix to Compose Applications

New in version 1.2.

The pyramid.config.Configurator.include() method allows configuration statements to be


included from separate files. See Rules for Building an Extensible Application for information about this
method. Using pyramid.config.Configurator.include() allows you to build your applica-
tion from small and potentially reusable components.

The pyramid.config.Configurator.include() method accepts an argument named


route_prefix which can be useful to authors of URL-dispatch-based applications. If
route_prefix is supplied to the include method, it must be a string. This string represents a
route prefix that will be prepended to all route patterns added by the included configuration. Any calls
to pyramid.config.Configurator.add_route() within the included callable will have their
pattern prefixed with the value of route_prefix. This can be used to help mount a set of routes at
a different location than the included callable’s author intended while still maintaining the same route
names. For example:

1 from pyramid.config import Configurator


2

3 def users_include(config):
4 config.add_route('show_users', '/show')
5

6 def main(global_config, **settings):


7 config = Configurator()
8 config.include(users_include, route_prefix='/users')

In the above configuration, the show_users route will have an effective route pattern of /users/show
instead of /show because the route_prefix argument will be prepended to the pattern. The route will
then only match if the URL path is /users/show, and when the pyramid.request.Request.
route_url() function is called with the route name show_users, it will generate a URL with that
same path.

Route prefixes are recursive, so if a callable executed via an include itself turns around and includes another
callable, the second-level route prefix will be prepended with the first:

412 Contents
The Pyramid Web Framework, Version 1.9.4

1 from pyramid.config import Configurator


2

3 def timing_include(config):
4 config.add_route('show_times', '/times')
5

6 def users_include(config):
7 config.add_route('show_users', '/show')
8 config.include(timing_include, route_prefix='/timing')
9

10 def main(global_config, **settings):


11 config = Configurator()
12 config.include(users_include, route_prefix='/users')

In the above configuration, the show_users route will still have an effective route pattern of /users/
show. The show_times route, however, will have an effective pattern of /users/timing/times.

Route prefixes have no impact on the requirement that the set of route names in any given Pyramid con-
figuration must be entirely unique. If you compose your URL dispatch application out of many small sub-
applications using pyramid.config.Configurator.include(), it’s wise to use a dotted name
for your route names so they’ll be unlikely to conflict with other packages that may be added in the future.
For example:

1 from pyramid.config import Configurator


2

3 def timing_include(config):
4 config.add_route('timing.show_times', '/times')
5

6 def users_include(config):
7 config.add_route('users.show_users', '/show')
8 config.include(timing_include, route_prefix='/timing')
9

10 def main(global_config, **settings):


11 config = Configurator()
12 config.include(users_include, route_prefix='/users')

Custom Route Predicates

Each of the predicate callables fed to the custom_predicates argument of add_route() must
be a callable accepting two arguments. The first argument passed to a custom predicate is a dictionary
conventionally named info. The second argument is the current request object.

0.3. Narrative Documentation 413


The Pyramid Web Framework, Version 1.9.4

The info dictionary has a number of contained values, including match and route. match is a dictio-
nary which represents the arguments matched in the URL by the route. route is an object representing
the route which was matched (see pyramid.interfaces.IRoute for the API of such a route object).

info['match'] is useful when predicates need access to the route match. For example:

1 def any_of(segment_name, *allowed):


2 def predicate(info, request):
3 if info['match'][segment_name] in allowed:
4 return True
5 return predicate
6

7 num_one_two_or_three = any_of('num', 'one', 'two', 'three')


8

9 config.add_route('route_to_num', '/{num}',
10 custom_predicates=(num_one_two_or_three,))

The above any_of function generates a predicate which ensures that the match value named
segment_name is in the set of allowable values represented by allowed. We use this any_of func-
tion to generate a predicate function named num_one_two_or_three, which ensures that the num
segment is one of the values one, two, or three , and use the result as a custom predicate by feeding it
inside a tuple to the custom_predicates argument to add_route().

A custom route predicate may also modify the match dictionary. For instance, a predicate might do some
type conversion of values:

1 def integers(*segment_names):
2 def predicate(info, request):
3 match = info['match']
4 for segment_name in segment_names:
5 try:
6 match[segment_name] = int(match[segment_name])
7 except (TypeError, ValueError):
8 pass
9 return True
10 return predicate
11

12 ymd_to_int = integers('year', 'month', 'day')


13

14 config.add_route('ymd', '/{year}/{month}/{day}',
15 custom_predicates=(ymd_to_int,))

414 Contents
The Pyramid Web Framework, Version 1.9.4

Note that a conversion predicate is still a predicate, so it must return True or False. A predicate that
does only conversion, such as the one we demonstrate above, should unconditionally return True.

To avoid the try/except uncertainty, the route pattern can contain regular expressions specifying require-
ments for that marker. For instance:

1 def integers(*segment_names):
2 def predicate(info, request):
3 match = info['match']
4 for segment_name in segment_names:
5 match[segment_name] = int(match[segment_name])
6 return True
7 return predicate
8

9 ymd_to_int = integers('year', 'month', 'day')


10

11 config.add_route('ymd', '/{year:\d+}/{month:\d+}/{day:\d+}',
12 custom_predicates=(ymd_to_int,))

Now the try/except is no longer needed because the route will not match at all unless these markers match
\d+ which requires them to be valid digits for an int type conversion.

The match dictionary passed within info to each predicate attached to a route will be the same dictionary.
Therefore, when registering a custom predicate which modifies the match dict, the code registering the
predicate should usually arrange for the predicate to be the last custom predicate in the custom predicate
list. Otherwise, custom predicates which fire subsequent to the predicate which performs the match
modification will receive the modified match dictionary.

It is a poor idea to rely on ordering of custom predicates to build a conversion pipeline, where
one predicate depends on the side effect of another. For instance, it’s a poor idea to register two custom
predicates, one which handles conversion of a value to an int, the next which handles conversion of
that integer to some custom object. Just do all that in a single custom predicate.

The route object in the info dict is an object that has two useful attributes: name and pattern. The
name attribute is the route name. The pattern attribute is the route pattern. Here’s an example of using
the route in a set of route predicates:

0.3. Narrative Documentation 415


The Pyramid Web Framework, Version 1.9.4

1 def twenty_ten(info, request):


2 if info['route'].name in ('ymd', 'ym', 'y'):
3 return info['match']['year'] == '2010'
4

5 config.add_route('y', '/{year}', custom_predicates=(twenty_ten,))


6 config.add_route('ym', '/{year}/{month}', custom_predicates=(twenty_
,→ten,))

7 config.add_route('ymd', '/{year}/{month}/{day}',
8 custom_predicates=(twenty_ten,))

The above predicate, when added to a number of route configurations ensures that the year match argument
is ’2010’ if and only if the route name is ’ymd’, ’ym’, or ’y’.
You can also caption the predicates by setting the __text__ attribute. This will help you with the
pviews command (see Displaying All Application Routes) and the pyramid_debugtoolbar.
If a predicate is a class, just add __text__ property in a standard manner.

1 class DummyCustomPredicate1(object):
2 def __init__(self):
3 self.__text__ = 'my custom class predicate'
4

5 class DummyCustomPredicate2(object):
6 __text__ = 'my custom class predicate'

If a predicate is a method, you’ll need to assign it after method declaration (see PEP 232).

1 def custom_predicate():
2 pass
3 custom_predicate.__text__ = 'my custom method predicate'

If a predicate is a classmethod, using @classmethod will not work, but you can still easily do it by
wrapping it in a classmethod call.

1 def classmethod_predicate():
2 pass
3 classmethod_predicate.__text__ = 'my classmethod predicate'
4 classmethod_predicate = classmethod(classmethod_predicate)

The same will work with staticmethod, using staticmethod instead of classmethod.
See also:
See also pyramid.interfaces.IRoute for more API documentation about route objects.

416 Contents
The Pyramid Web Framework, Version 1.9.4

Route Factories

Although it is not a particularly common need in basic applications, a ”route” configuration declaration
can mention a ”factory”. When a route matches a request, and a factory is attached to the route, the root
factory passed at startup time to the Configurator is ignored. Instead the factory associated with the route
is used to generate a root object. This object will usually be used as the context resource of the view
callable ultimately found via view lookup.

1 config.add_route('abc', '/abc',
2 factory='myproject.resources.root_factory')
3 config.add_view('myproject.views.theview', route_name='abc')

The factory can either be a Python object or a dotted Python name (a string) which points to such a Python
object, as it is above.

In this way, each route can use a different factory, making it possible to supply a different context resource
object to the view related to each particular route.

A factory must be a callable which accepts a request and returns an arbitrary Python object. For example,
the below class can be used as a factory:

1 class Mine(object):
2 def __init__(self, request):
3 pass

A route factory is actually conceptually identical to the root factory described at The Resource Tree.

Supplying a different resource factory for each route is useful when you’re trying to use a Pyramid au-
thorization policy to provide declarative, ”context sensitive” security checks. Each resource can maintain
a separate ACL, as documented in Using Pyramid Security with URL Dispatch. It is also useful when
you wish to combine URL dispatch with traversal as documented within Combining Traversal and URL
Dispatch.

Using Pyramid Security with URL Dispatch

Pyramid provides its own security framework which consults an authorization policy before allowing any
application code to be called. This framework operates in terms of an access control list, which is stored
as an __acl__ attribute of a resource object. A common thing to want to do is to attach an __acl__
to the resource object dynamically for declarative security purposes. You can use the factory argument
that points at a factory which attaches a custom __acl__ to an object at its creation time.

Such a factory might look like so:

0.3. Narrative Documentation 417


The Pyramid Web Framework, Version 1.9.4

1 class Article(object):
2 def __init__(self, request):
3 matchdict = request.matchdict
4 article = matchdict.get('article', None)
5 if article == '1':
6 self.__acl__ = [ (Allow, 'editor', 'view') ]

If the route archives/{article} is matched, and the article number is 1, Pyramid will generate an
Article context resource with an ACL on it that allows the editor principal the view permission.
Obviously you can do more generic things than inspect the route’s match dict to see if the article
argument matches a particular string. Our sample Article factory class is not very ambitious.

See Security for more information about Pyramid security and ACLs.

Route View Callable Registration and Lookup Details

When a request enters the system which matches the pattern of the route, the usual result is simple: the
view callable associated with the route is invoked with the request that caused the invocation.

For most usage, you needn’t understand more than this. How it works is an implementation detail. In the
interest of completeness, however, we’ll explain how it does work in this section. You can skip it if you’re
uninterested.

When a view is associated with a route configuration, Pyramid ensures that a view configuration is regis-
tered that will always be found when the route pattern is matched during a request. To do so:

• A special route-specific interface is created at startup time for each route configuration declaration.

• When an add_view statement mentions a route name attribute, a view configuration is regis-
tered at startup time. This view configuration uses a route-specific interface as a request type.

• At runtime, when a request causes any route to match, the request object is decorated with the route-
specific interface.

• The fact that the request is decorated with a route-specific interface causes the view lookup machinery
to always use the view callable registered using that interface by the route configuration to service
requests that match the route pattern.

418 Contents
The Pyramid Web Framework, Version 1.9.4

As we can see from the above description, technically, URL dispatch doesn’t actually map a URL pattern
directly to a view callable. Instead URL dispatch is a resource location mechanism. A Pyramid resource
location subsystem (i.e., URL dispatch or traversal) finds a resource object that is the context of a request.
Once the context is determined, a separate subsystem named view lookup is then responsible for finding
and invoking a view callable based on information available in the context and the request. When URL
dispatch is used, the resource location and view lookup subsystems provided by Pyramid are still being
utilized, but in a way which does not require a developer to understand either of them in detail.
If no route is matched using URL dispatch, Pyramid falls back to traversal to handle the request.

References

A tutorial showing how URL dispatch can be used to create a Pyramid application exists in SQLAlchemy
+ URL dispatch wiki tutorial.

0.3.9 Views

One of the primary jobs of Pyramid is to find and invoke a view callable when a request reaches your
application. View callables are bits of code which do something interesting in response to a request made
to your application. They are the ”meat” of any interesting web application.

A Pyramid view callable is often referred to in conversational shorthand as a view. In this docu-
mentation, however, we need to use less ambiguous terminology because there are significant differences
between view configuration, the code that implements a view callable, and the process of view lookup.

This chapter describes how view callables should be defined. We’ll have to wait until a following chapter
(entitled View Configuration) to find out how we actually tell Pyramid to wire up view callables to particular
URL patterns and other request circumstances.

View Callables

View callables are, at the risk of sounding obvious, callable Python objects. Specifically, view callables can
be functions, classes, or instances that implement a __call__ method (making the instance callable).
View callables must, at a minimum, accept a single argument named request. This argument represents
a Pyramid Request object. A request object represents a WSGI environment provided to Pyramid by the
upstream WSGI server. As you might expect, the request object contains everything your application needs
to know about the specific HTTP request being made.
A view callable’s ultimate responsibility is to create a Pyramid Response object. This can be done by
creating a Response object in the view callable code and returning it directly or by raising special kinds of
exceptions from within the body of a view callable.

0.3. Narrative Documentation 419


The Pyramid Web Framework, Version 1.9.4

Defining a View Callable as a Function

One of the easiest ways to define a view callable is to create a function that accepts a single argument
named request, and which returns a Response object. For example, this is a ”hello world” view callable
implemented as a function:

1 from pyramid.response import Response


2

3 def hello_world(request):
4 return Response('Hello world!')

Defining a View Callable as a Class

A view callable may also be represented by a Python class instead of a function. When a view callable is
a class, the calling semantics are slightly different than when it is a function or another non-class callable.
When a view callable is a class, the class’s __init__ method is called with a request parameter. As
a result, an instance of the class is created. Subsequently, that instance’s __call__ method is invoked
with no parameters. Views defined as classes must have the following traits.

• an __init__ method that accepts a request argument

• a __call__ (or other) method that accepts no parameters and which returns a response

For example:

1 from pyramid.response import Response


2

3 class MyView(object):
4 def __init__(self, request):
5 self.request = request
6

7 def __call__(self):
8 return Response('hello')

The request object passed to __init__ is the same type of request object described in Defining a View
Callable as a Function.

If you’d like to use a different attribute than __call__ to represent the method expected to return a
response, you can use an attr value as part of the configuration for the view. See View Configuration
Parameters. The same view callable class can be used in different view configuration statements with
different attr values, each pointing at a different method of the class if you’d like the class to represent a
collection of related view callables.

420 Contents
The Pyramid Web Framework, Version 1.9.4

View Callable Responses

A view callable may return an object that implements the Pyramid Response interface. The easiest
way to return something that implements the Response interface is to return a pyramid.response.
Response object instance directly. For example:

1 from pyramid.response import Response


2

3 def view(request):
4 return Response('OK')

Pyramid provides a range of different ”exception” classes which inherit from pyramid.response.
Response. For example, an instance of the class pyramid.httpexceptions.HTTPFound is also
a valid response object because it inherits from Response. For examples, see HTTP Exceptions and
Using a View Callable to do an HTTP Redirect.

You can also return objects from view callables that aren’t instances of pyramid.response.
Response in various circumstances. This can be helpful when writing tests and when attempting to share
code between view callables. See Renderers for the common way to allow for this. A much less common
way to allow for view callables to return non-Response objects is documented in Changing How Pyramid
Treats View Responses.

Using Special Exceptions in View Callables

Usually when a Python exception is raised within a view callable, Pyramid allows the exception to prop-
agate all the way out to the WSGI server which invoked the application. It is usually caught and logged
there.

However, for convenience, a special set of exceptions exists. When one of these exceptions is raised within
a view callable, it will always cause Pyramid to generate a response. These are known as HTTP exception
objects.

0.3. Narrative Documentation 421


The Pyramid Web Framework, Version 1.9.4

HTTP Exceptions

All pyramid.httpexceptions classes which are documented as inheriting from the pyramid.
httpexceptions.HTTPException are http exception objects. Instances of an HTTP exception
object may either be returned or raised from within view code. In either case (return or raise) the instance
will be used as the view’s response.

For example, the pyramid.httpexceptions.HTTPUnauthorized exception can be raised. This


will cause a response to be generated with a 401 Unauthorized status:

1 from pyramid.httpexceptions import HTTPUnauthorized


2

3 def aview(request):
4 raise HTTPUnauthorized()

An HTTP exception, instead of being raised, can alternately be returned (HTTP exceptions are also valid
response objects):

1 from pyramid.httpexceptions import HTTPUnauthorized


2

3 def aview(request):
4 return HTTPUnauthorized()

A shortcut for creating an HTTP exception is the pyramid.httpexceptions.


exception_response() function. This function accepts an HTTP status code and returns the corre-
sponding HTTP exception. For example, instead of importing and constructing a HTTPUnauthorized
response object, you can use the exception_response() function to construct and return the same
object.

1 from pyramid.httpexceptions import exception_response


2

3 def aview(request):
4 raise exception_response(401)

This is the case because 401 is the HTTP status code for ”HTTP Unauthorized”. Therefore, raise
exception_response(401) is functionally equivalent to raise HTTPUnauthorized().
Documentation which maps each HTTP response code to its purpose and its associated HTTP exception
object is provided within pyramid.httpexceptions.

New in version 1.1: The exception_response() function.

422 Contents
The Pyramid Web Framework, Version 1.9.4

How Pyramid Uses HTTP Exceptions

HTTP exceptions are meant to be used directly by application developers. However, Pyramid itself will
raise two HTTP exceptions at various points during normal operations.

• HTTPNotFound gets raised when a view to service a request is not found.

• HTTPForbidden gets raised when authorization was forbidden by a security policy.

If HTTPNotFound is raised by Pyramid itself or within view code, the result of the Not Found View will
be returned to the user agent which performed the request.

If HTTPForbidden is raised by Pyramid itself or within view code, the result of the Forbidden View
will be returned to the user agent which performed the request.

Custom Exception Views

The machinery which allows HTTP exceptions to be raised and caught by specialized views as described in
Using Special Exceptions in View Callables can also be used by application developers to convert arbitrary
exceptions to responses.

To register an exception view that should be called whenever a particular exception is raised from within
Pyramid view code, use pyramid.config.Configurator.add_exception_view() to reg-
ister a view configuration which matches the exception (or a subclass of the exception) and points at a
view callable for which you’d like to generate a response. The exception will be passed as the context
argument to any view predicate registered with the view, as well as to the view itself. For convenience a
new decorator exists, pyramid.views.exception_view_config, which may be used to easily
register exception views.

For example, given the following exception class in a module named helloworld.exceptions:

1 class ValidationFailure(Exception):
2 def __init__(self, msg):
3 self.msg = msg

You can wire a view callable to be called whenever any of your other code raises a helloworld.
exceptions.ValidationFailure exception:

0.3. Narrative Documentation 423


The Pyramid Web Framework, Version 1.9.4

1 from pyramid.view import exception_view_config


2 from helloworld.exceptions import ValidationFailure
3

4 @exception_view_config(ValidationFailure)
5 def failed_validation(exc, request):
6 response = Response('Failed validation: %s' % exc.msg)
7 response.status_int = 500
8 return response

Assuming that a scan was run to pick up this view registration, this view callable will be invoked whenever a
helloworld.exceptions.ValidationFailure is raised by your application’s view code. The
same exception raised by a custom root factory, a custom traverser, or a custom view or route predicate is
also caught and hooked.

Other normal view predicates can also be used in combination with an exception view registration:

1 from pyramid.view import view_config


2 from helloworld.exceptions import ValidationFailure
3

4 @exception_view_config(ValidationFailure, route_name='home')
5 def failed_validation(exc, request):
6 response = Response('Failed validation: %s' % exc.msg)
7 response.status_int = 500
8 return response

The above exception view names the route_name of home, meaning that it will only be called when
the route matched has a name of home. You can therefore have more than one exception view for any
given exception in the system: the ”most specific” one will be called when the set of request circumstances
match the view registration.

The only view predicate that cannot be used successfully when creating an exception view configuration
is name. The name used to look up an exception view is always the empty string. Views registered as
exception views which have a name will be ignored.

In most cases, you should register an exception view by using pyramid.config.


Configurator.add_exception_view(). However, it is possible to register ”normal” (i.e., non-
exception) views against a context resource type which inherits from Exception (i.e., config.
add_view(context=Exception)). When the view configuration is processed, two views are reg-
istered. One as a ”normal” view, the other as an exception view. This means that you can use an exception
as context for a normal view.

424 Contents
The Pyramid Web Framework, Version 1.9.4

The view derivers that wrap these two views may behave differently. See Exception Views and View De-
rivers for more information about this.

Exception views can be configured with any view registration mechanism:


@exception_view_config decorator or imperative add_exception_view styles.

Pyramid’s exception view handling logic is implemented as a tween factory function: pyramid.
tweens.excview_tween_factory(). If Pyramid exception view handling is desired, and tween
factories are specified via the pyramid.tweens configuration setting, the pyramid.tweens.
excview_tween_factory() function must be added to the pyramid.tweens configuration set-
ting list explicitly. If it is not present, Pyramid will not perform exception view handling.

Using a View Callable to do an HTTP Redirect

You can issue an HTTP redirect by using the pyramid.httpexceptions.HTTPFound class. Rais-
ing or returning an instance of this class will cause the client to receive a ”302 Found” response.

To do so, you can return a pyramid.httpexceptions.HTTPFound instance.

1 from pyramid.httpexceptions import HTTPFound


2

3 def myview(request):
4 return HTTPFound(location='http://example.com')

Alternately, you can raise an HTTPFound exception instead of returning one.

1 from pyramid.httpexceptions import HTTPFound


2

3 def myview(request):
4 raise HTTPFound(location='http://example.com')

When the instance is raised, it is caught by the default exception response handler and turned into a re-
sponse.

0.3. Narrative Documentation 425


The Pyramid Web Framework, Version 1.9.4

Handling Form Submissions in View Callables (Unicode and Character Set Issues)

Most web applications need to accept form submissions from web browsers and various other clients.
In Pyramid, form submission handling logic is always part of a view. For a general overview of how
to handle form submission data using the WebOb API, see Request and Response Objects and ”Query
and POST variables” within the WebOb documentation. Pyramid defers to WebOb for its request and
response implementations, and handling form submission data is a property of the request implementation.
Understanding WebOb’s request API is the key to understanding how to process form submission data.
There are some defaults that you need to be aware of when trying to handle form submission data in a
Pyramid view. Having high-order (i.e., non-ASCII) characters in data contained within form submissions is
exceedingly common, and the UTF-8 encoding is the most common encoding used on the web for character
data. Since Unicode values are much saner than working with and storing bytestrings, Pyramid configures
the WebOb request machinery to attempt to decode form submission values into Unicode from UTF-8
implicitly. This implicit decoding happens when view code obtains form field values via the request.
params, request.GET, or request.POST APIs (see pyramid.request for details about these APIs).

Many people find the difference between Unicode and UTF-8 confusing. Unicode is a standard for
representing text that supports most of the world’s writing systems. However, there are many ways that
Unicode data can be encoded into bytes for transit and storage. UTF-8 is a specific encoding for Unicode
that is backwards-compatible with ASCII. This makes UTF-8 very convenient for encoding data where a
large subset of that data is ASCII characters, which is largely true on the web. UTF-8 is also the standard
character encoding for URLs.

As an example, let’s assume that the following form page is served up to a browser client, and its action
points at some Pyramid view code:

1 <html xmlns="http://www.w3.org/1999/xhtml">
2 <head>
3 <meta http-equiv="Content-Type" content="text/html; charset=UTF-
,→8"/>

4 </head>
5 <form method="POST" action="myview">
6 <div>
7 <input type="text" name="firstname"/>
8 </div>
9 <div>
10 <input type="text" name="lastname"/>
11 </div>
12 <input type="submit" value="Submit"/>
13 </form>
14 </html>

426 Contents
The Pyramid Web Framework, Version 1.9.4

The myview view code in the Pyramid application must expect that the values returned by request.
params will be of type unicode, as opposed to type str. The following will work to accept a form
post from the above form:

1 def myview(request):
2 firstname = request.params['firstname']
3 lastname = request.params['lastname']

But the following myview view code may not work, as it tries to decode already-decoded (unicode)
values obtained from request.params:

1 def myview(request):
2 # the .decode('utf-8') will break below if there are any high-
,→order

3 # characters in the firstname or lastname


4 firstname = request.params['firstname'].decode('utf-8')
5 lastname = request.params['lastname'].decode('utf-8')

For implicit decoding to work reliably, you should ensure that every form you render that posts to a Pyra-
mid view explicitly defines a charset encoding of UTF-8. This can be done via a response that has a ;
charset=UTF-8 in its Content-Type header; or, as in the form above, with a meta http-equiv
tag that implies that the charset is UTF-8 within the HTML head of the page containing the form. This
must be done explicitly because all known browser clients assume that they should encode form data in
the same character set implied by the Content-Type value of the response containing the form when
subsequently submitting that form. There is no other generally accepted way to tell browser clients which
charset to use to encode form data. If you do not specify an encoding explicitly, the browser client will
choose to encode form data in its default character set before submitting it, which may not be UTF-8
as the server expects. If a request containing form data encoded in a non-UTF-8 charset is handled
by your view code, eventually the request code accessed within your view will throw an error when it
can’t decode some high-order character encoded in another character set within form data, e.g., when
request.params['somename'] is accessed.
If you are using the Response class to generate a response, or if you use the render_template_*
templating APIs, the UTF-8 charset is set automatically as the default via the Content-Type
header. If you return a Content-Type header without an explicit charset, a request will add a ;
charset=utf-8 trailer to the Content-Type header value for you for response content types that
are textual (e.g., text/html or application/xml) as it is rendered. If you are using your own
response object, you will need to ensure you do this yourself.

Only the values of request params obtained via request.params, request.GET or request.
POST are decoded to Unicode objects implicitly in the Pyramid default configuration. The keys are still
(byte) strings.

0.3. Narrative Documentation 427


The Pyramid Web Framework, Version 1.9.4

Alternate View Callable Argument/Calling Conventions

Usually view callables are defined to accept only a single argument: request. However, a view callable
may alternately be defined as any class, function, or callable that accepts two positional arguments: a
context resource as the first argument and a request as the second argument.

The context and request arguments passed to a view function defined in this style can be defined as follows:

context The resource object found via tree traversal or URL dispatch.

request A Pyramid Request object representing the current WSGI request.

The following types work as view callables in this style:

1. Functions that accept two arguments: context and request, e.g.:

1 from pyramid.response import Response


2

3 def view(context, request):


4 return Response('OK')

2. Classes that have an __init__ method that accepts context, request, and a __call__
method which accepts no arguments, e.g.:

1 from pyramid.response import Response


2

3 class view(object):
4 def __init__(self, context, request):
5 self.context = context
6 self.request = request
7

8 def __call__(self):
9 return Response('OK')

3. Arbitrary callables that have a __call__ method that accepts context, request, e.g.:

1 from pyramid.response import Response


2

3 class View(object):
4 def __call__(self, context, request):
5 return Response('OK')
6 view = View() # this is the view callable

428 Contents
The Pyramid Web Framework, Version 1.9.4

This style of calling convention is most useful for traversal based applications, where the context object is
frequently used within the view callable code itself.
No matter which view calling convention is used, the view code always has access to the context via
request.context.

Passing Configuration Variables to a View

For information on passing a variable from the configuration .ini files to a view, see Deployment Settings.

Pylons-1.0-Style ”Controller” Dispatch

A package named pyramid_handlers (available from PyPI) provides an analogue of Pylons-style ”con-
trollers”, which are a special kind of view class which provides more automation when your application
uses URL dispatch solely.

0.3.10 Renderers
A view callable needn’t always return a Response object. If a view happens to return something which
does not implement the Pyramid Response interface, Pyramid will attempt to use a renderer to construct
a response. For example:

1 from pyramid.view import view_config


2

3 @view_config(renderer='json')
4 def hello_world(request):
5 return {'content':'Hello!'}

The above example returns a dictionary from the view callable. A dictionary does not implement the Pyra-
mid response interface, so you might believe that this example would fail. However, since a renderer is
associated with the view callable through its view configuration (in this case, using a renderer argument
passed to view_config()), if the view does not return a Response object, the renderer will attempt to
convert the result of the view to a response on the developer’s behalf.
Of course, if no renderer is associated with a view’s configuration, returning anything except an object
which implements the Response interface will result in an error. And, if a renderer is used, whatever is
returned by the view must be compatible with the particular kind of renderer used, or an error may occur
during view invocation.
One exception exists: it is always OK to return a Response object, even when a renderer is configured.
In such cases, the renderer is bypassed entirely.
Various types of renderers exist, including serialization renderers and renderers which use templating sys-
tems.

0.3. Narrative Documentation 429


The Pyramid Web Framework, Version 1.9.4

Writing View Callables Which Use a Renderer

As we’ve seen, a view callable needn’t always return a Response object. Instead, it may return an arbitrary
Python object, with the expectation that a renderer will convert that object into a response instance on your
behalf. Some renderers use a templating system, while other renderers use object serialization techniques.
In practice, renderers obtain application data values from Python dictionaries so, in practice, view callables
which use renderers return Python dictionaries.
View callables can explicitly call renderers, but typically don’t. Instead view configuration declares the
renderer used to render a view callable’s results. This is done with the renderer attribute. For example,
this call to add_view() associates the json renderer with a view callable:

config.add_view('myproject.views.my_view', renderer='json')

When this configuration is added to an application, the myproject.views.my_view view callable


will now use a json renderer, which renders view return values to a JSON response serialization.
Pyramid defines several Built-in Renderers, and additional renderers can be added by developers to the
system as necessary. See Adding and Changing Renderers.
Views which use a renderer and return a non-Response value can vary non-body response attributes (such
as headers and the HTTP status code) by attaching a property to the request.response attribute. See
Varying Attributes of Rendered Responses.
As already mentioned, if the view callable associated with a view configuration returns a Response object
(or its instance), any renderer associated with the view configuration is ignored, and the response is passed
back to Pyramid unchanged. For example:

1 from pyramid.response import Response


2 from pyramid.view import view_config
3

4 @view_config(renderer='json')
5 def view(request):
6 return Response('OK') # json renderer avoided

Likewise for an HTTP exception response:

1 from pyramid.httpexceptions import HTTPFound


2 from pyramid.view import view_config
3

4 @view_config(renderer='json')
5 def view(request):
6 return HTTPFound(location='http://example.com') # json renderer␣
,→avoided

430 Contents
The Pyramid Web Framework, Version 1.9.4

You can of course also return the request.response attribute instead to avoid rendering:

1 from pyramid.view import view_config


2

3 @view_config(renderer='json')
4 def view(request):
5 request.response.body = 'OK'
6 return request.response # json renderer avoided

Built-in Renderers

Several built-in renderers exist in Pyramid. These renderers can be used in the renderer attribute of
view configurations.

Bindings for officially supported templating languages can be found at Available Add-On Template
System Bindings.

string: String Renderer

The string renderer renders a view callable result to a string. If a view callable returns a non-Response
object, and the string renderer is associated in that view’s configuration, the result will be to run the
object through the Python str function to generate a string. Note that if a Unicode object is returned by
the view callable, it is not str()-ified.

Here’s an example of a view that returns a dictionary. If the string renderer is specified in the con-
figuration for this view, the view will render the returned dictionary to the str() representation of the
dictionary:

1 from pyramid.view import view_config


2

3 @view_config(renderer='string')
4 def hello_world(request):
5 return {'content':'Hello!'}

The body of the response returned by such a view will be a string representing the str() serialization of
the return value:

0.3. Narrative Documentation 431


The Pyramid Web Framework, Version 1.9.4

{'content': 'Hello!'}

Views which use the string renderer can vary non-body response attributes by using the API of the
request.response attribute. See Varying Attributes of Rendered Responses.

JSON Renderer

The json renderer renders view callable results to JSON. By default, it passes the return value through
the json.dumps standard library function, and wraps the result in a response object. It also sets the
response content-type to application/json.

Here’s an example of a view that returns a dictionary. Since the json renderer is specified in the config-
uration for this view, the view will render the returned dictionary to a JSON serialization:

1 from pyramid.view import view_config


2

3 @view_config(renderer='json')
4 def hello_world(request):
5 return {'content':'Hello!'}

The body of the response returned by such a view will be a string representing the JSON serialization of
the return value:

{"content": "Hello!"}

The return value needn’t be a dictionary, but the return value must contain values serializable by the con-
figured serializer (by default json.dumps).

You can configure a view to use the JSON renderer by naming json as the renderer argument of a
view configuration, e.g., by using add_view():

1 config.add_view('myproject.views.hello_world',
2 name='hello',
3 context='myproject.resources.Hello',
4 renderer='json')

Views which use the JSON renderer can vary non-body response attributes by using the API of the
request.response attribute. See Varying Attributes of Rendered Responses.

432 Contents
The Pyramid Web Framework, Version 1.9.4

Serializing Custom Objects

Some objects are not, by default, JSON-serializable (such as datetimes and other arbitrary Python objects).
You can, however, register code that makes non-serializable objects serializable in two ways:
• Define a __json__ method on objects in your application.
• For objects you don’t ”own”, you can register a JSON renderer that knows about an adapter for that
kind of object.

Using a Custom __json__ Method

Custom objects can be made easily JSON-serializable in Pyramid by defining a __json__ method on the
object’s class. This method should return values natively JSON-serializable (such as ints, lists, dictionaries,
strings, and so forth). It should accept a single additional argument, request, which will be the active
request object at render time.

1 from pyramid.view import view_config


2

3 class MyObject(object):
4 def __init__(self, x):
5 self.x = x
6

7 def __json__(self, request):


8 return {'x':self.x}
9

10 @view_config(renderer='json')
11 def objects(request):
12 return [MyObject(1), MyObject(2)]
13

14 # the JSON value returned by ``objects`` will be:


15 # [{"x": 1}, {"x": 2}]

Using the add_adapter Method of a Custom JSON Renderer

If you aren’t the author of the objects being serialized, it won’t be possible (or at least not reasonable) to
add a custom __json__ method to their classes in order to influence serialization. If the object passed
to the renderer is not a serializable type and has no __json__ method, usually a TypeError will be
raised during serialization. You can change this behavior by creating a custom JSON renderer and adding
adapters to handle custom types. The renderer will attempt to adapt non-serializable objects using the
registered adapters. A short example follows:

0.3. Narrative Documentation 433


The Pyramid Web Framework, Version 1.9.4

1 from pyramid.renderers import JSON


2

3 if __name__ == '__main__':
4 config = Configurator()
5 json_renderer = JSON()
6 def datetime_adapter(obj, request):
7 return obj.isoformat()
8 json_renderer.add_adapter(datetime.datetime, datetime_adapter)
9 config.add_renderer('json', json_renderer)

The add_adapter method should accept two arguments: the class of the object that you want this
adapter to run for (in the example above, datetime.datetime), and the adapter itself.

The adapter should be a callable. It should accept two arguments: the object needing to be serialized and
request, which will be the current request object at render time. The adapter should raise a TypeError
if it can’t determine what to do with the object.

See pyramid.renderers.JSON and Adding and Changing Renderers for more information.

New in version 1.4: Serializing custom objects.

JSONP Renderer

New in version 1.1.

pyramid.renderers.JSONP is a JSONP renderer factory helper which implements a hybrid


JSON/JSONP renderer. JSONP is useful for making cross-domain AJAX requests.

Unlike other renderers, a JSONP renderer needs to be configured at startup time ”by hand”. Configure a
JSONP renderer using the pyramid.config.Configurator.add_renderer() method:

from pyramid.config import Configurator


from pyramid.renderers import JSONP

config = Configurator()
config.add_renderer('jsonp', JSONP(param_name='callback'))

Once this renderer is registered via add_renderer() as above, you can use jsonp as the renderer=
parameter to @view_config or pyramid.config.Configurator.add_view():

434 Contents
The Pyramid Web Framework, Version 1.9.4

from pyramid.view import view_config

@view_config(renderer='jsonp')
def myview(request):
return {'greeting':'Hello world'}

When a view is called that uses a JSONP renderer:

• If there is a parameter in the request’s HTTP query string (aka request.GET) that matches the
param_name of the registered JSONP renderer (by default, callback), the renderer will return
a JSONP response.

• If there is no callback parameter in the request’s query string, the renderer will return a ”plain” JSON
response.

Javscript library AJAX functionality will help you make JSONP requests. For example, JQuery has a
getJSON function, and has equivalent (but more complicated) functionality in its ajax function.

For example (JavaScript):

var api_url = 'http://api.geonames.org/timezoneJSON' +


'?lat=38.301733840000004' +
'&lng=-77.45869621' +
'&username=fred' +
'&callback=?';
jqhxr = $.getJSON(api_url);

The string callback=? above in the url param to the JQuery getJSON function indicates to jQuery
that the query should be made as a JSONP request; the callback parameter will be automatically filled
in for you and used.

The same custom-object serialization scheme defined used for a ”normal” JSON renderer in Serializing
Custom Objects can be used when passing values to a JSONP renderer too.

0.3. Narrative Documentation 435


The Pyramid Web Framework, Version 1.9.4

Varying Attributes of Rendered Responses

Before a response constructed by a renderer is returned to Pyramid, several attributes of the request are
examined which have the potential to influence response behavior.

View callables that don’t directly return a response should use the API of the pyramid.response.
Response attribute, available as request.response during their execution, to influence associated
response behavior.

For example, if you need to change the response status from within a view callable that uses a renderer,
assign the status attribute to the response attribute of the request before returning a result:

1 from pyramid.view import view_config


2

3 @view_config(name='gone', renderer='templates/gone.pt')
4 def myview(request):
5 request.response.status = '404 Not Found'
6 return {'URL':request.URL}

Note that mutations of request.response in views which return a Response object directly will have
no effect unless the response object returned is request.response. For example, the following ex-
ample calls request.response.set_cookie, but this call will have no effect because a different
Response object is returned.

1 from pyramid.response import Response


2

3 def view(request):
4 request.response.set_cookie('abc', '123') # this has no effect
5 return Response('OK') # because we're returning a different␣
,→response

If you mutate request.response and you’d like the mutations to have an effect, you must return
request.response:

1 def view(request):
2 request.response.set_cookie('abc', '123')
3 return request.response

For more information on attributes of the request, see the API documentation in pyramid.request. For more
information on the API of request.response, see pyramid.request.Request.response.

436 Contents
The Pyramid Web Framework, Version 1.9.4

Adding and Changing Renderers

New templating systems and serializers can be associated with Pyramid renderer names. To this end,
configuration declarations can be made which change an existing renderer factory, and which add a new
renderer factory.

Renderers can be registered imperatively using the pyramid.config.Configurator.


add_renderer() API.

For example, to add a renderer which renders views which have a renderer attribute that is a path that
ends in .jinja2:

config.add_renderer('.jinja2', 'mypackage.MyJinja2Renderer')

The first argument is the renderer name. The second argument is a reference to an implementation of a
renderer factory or a dotted Python name referring to such an object.

Adding a New Renderer

You may add a new renderer by creating and registering a renderer factory.

A renderer factory implementation should conform to the pyramid.interfaces.


IRendererFactory interface. It should be capable of creating an object that conforms to the
pyramid.interfaces.IRenderer interface. A typical class that follows this setup is as follows:

1 class RendererFactory:
2 def __init__(self, info):
3 """ Constructor: info will be an object having the
4 following attributes: name (the renderer name), package
5 (the package that was 'current' at the time the
6 renderer was registered), type (the renderer type
7 name), registry (the current application registry) and
8 settings (the deployment settings dictionary). """
9

10 def __call__(self, value, system):


11 """ Call the renderer implementation with the value
12 and the system value passed in as arguments and return
13 the result (a string or unicode object). The value is
14 the return value of a view. The system value is a
15 dictionary containing available system values
16 (e.g., view, context, and request). """

0.3. Narrative Documentation 437


The Pyramid Web Framework, Version 1.9.4

The formal interface definition of the info object passed to a renderer factory constructor is available as
pyramid.interfaces.IRendererInfo.

There are essentially two different kinds of renderer factories:

• A renderer factory which expects to accept an asset specification, or an absolute path, as the name
attribute of the info object fed to its constructor. These renderer factories are registered with a
name value that begins with a dot (.). These types of renderer factories usually relate to a file on
the filesystem, such as a template.

• A renderer factory which expects to accept a token that does not represent a filesystem path or an
asset specification in the name attribute of the info object fed to its constructor. These renderer
factories are registered with a name value that does not begin with a dot. These renderer factories
are typically object serializers.

Asset Specifications

An asset specification is a colon-delimited identifier for an asset. The colon separates a Python package
name from a package subpath. For example, the asset specification my.package:static/baz.
css identifies the file named baz.css in the static subdirectory of the my.package Python
package.

Here’s an example of the registration of a simple renderer factory via add_renderer(), where config
is an instance of pyramid.config.Configurator():

config.add_renderer(name='amf', factory='my.package.MyAMFRenderer')

Adding the above code to your application startup configuration will allow you to use the my.package.
MyAMFRenderer renderer factory implementation in view configurations. Your application can use this
renderer by specifying amf in the renderer attribute of a view configuration:

1 from pyramid.view import view_config


2

3 @view_config(renderer='amf')
4 def myview(request):
5 return {'Hello':'world'}

438 Contents
The Pyramid Web Framework, Version 1.9.4

At startup time, when a view configuration is encountered which has a name attribute that does not contain
a dot, the full name value is used to construct a renderer from the associated renderer factory. In this case,
the view configuration will create an instance of an MyAMFRenderer for each view configuration which
includes amf as its renderer value. The name passed to the MyAMFRenderer constructor will always
be amf.

Here’s an example of the registration of a more complicated renderer factory, which expects to be passed
a filesystem path:

config.add_renderer(name='.jinja2', factory='my.package.
,→MyJinja2Renderer')

Adding the above code to your application startup will allow you to use the my.package.
MyJinja2Renderer renderer factory implementation in view configurations by referring to any
renderer which ends in .jinja2 in the renderer attribute of a view configuration:

1 from pyramid.view import view_config


2

3 @view_config(renderer='templates/mytemplate.jinja2')
4 def myview(request):
5 return {'Hello':'world'}

When a view configuration is encountered at startup time which has a name attribute that does contain a
dot, the value of the name attribute is split on its final dot. The second element of the split is typically the
filename extension. This extension is used to look up a renderer factory for the configured view. Then the
value of renderer is passed to the factory to create a renderer for the view. In this case, the view con-
figuration will create an instance of a MyJinja2Renderer for each view configuration which includes
anything ending with .jinja2 in its renderer value. The name passed to the MyJinja2Renderer
constructor will be the full value that was set as renderer= in the view configuration.

Adding a Default Renderer

To associate a default renderer with all view configurations (even ones which do not possess a renderer
attribute), pass None as the name attribute to the renderer tag:

config.add_renderer(None, 'mypackage.json_renderer_factory')

0.3. Narrative Documentation 439


The Pyramid Web Framework, Version 1.9.4

Changing an Existing Renderer

Pyramid supports overriding almost every aspect of its setup through its Conflict Resolution mechanism.
This means that, in most cases, overriding a renderer is as simple as using the pyramid.config.
Configurator.add_renderer() method to redefine the template extension. For example, if you
would like to override the json renderer to specify a new renderer, you could do the following:

json_renderer = pyramid.renderers.JSON()
config.add_renderer('json', json_renderer)

After doing this, any views registered with the json renderer will use the new renderer.

Overriding a Renderer at Runtime

This is an advanced feature, not typically used by ”civilians”.

In some circumstances, it is necessary to instruct the system to ignore the static renderer declaration pro-
vided by the developer in view configuration, replacing the renderer with another after a request starts.
For example, an ”omnipresent” XML-RPC implementation that detects that the request is from an XML-
RPC client might override a view configuration statement made by the user instructing the view to use a
template renderer with one that uses an XML-RPC renderer. This renderer would produce an XML-RPC
representation of the data returned by an arbitrary view callable.

To use this feature, create a NewRequest subscriber which sniffs at the request data and which con-
ditionally sets an override_renderer attribute on the request itself, which in turn is the name of a
registered renderer. For example:

1 from pyramid.events import subscriber


2 from pyramid.events import NewRequest
3

4 @subscriber(NewRequest)
5 def set_xmlrpc_params(event):
6 request = event.request
7 if (request.content_type == 'text/xml'
8 and request.method == 'POST'
9 and not 'soapaction' in request.headers
(continues on next page)

440 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


10 and not 'x-pyramid-avoid-xmlrpc' in request.headers):
11 params, method = parse_xmlrpc_request(request)
12 request.xmlrpc_params, request.xmlrpc_method = params,␣
,→method

13 request.is_xmlrpc = True
14 request.override_renderer = 'xmlrpc'
15 return True

The result of such a subscriber will be to replace any existing static renderer configured by the developer
with a (notional, nonexistent) XML-RPC renderer, if the request appears to come from an XML-RPC
client.

0.3.11 Templates

A template is a file on disk which can be used to render dynamic data provided by a view. Pyramid offers
a number of ways to perform templating tasks out of the box, and provides add-on templating support
through a set of bindings packages.

Before discussing how built-in templates are used in detail, we’ll discuss two ways to render templates
within Pyramid in general: directly and via renderer configuration.

Using Templates Directly

The most straightforward way to use a template within Pyramid is to cause it to be rendered directly within
a view callable. You may use whatever API is supplied by a given templating engine to do so.

Pyramid provides various APIs that allow you to render templates directly from within a view callable.
For example, if there is a Chameleon ZPT template named foo.pt in a directory named templates
in your application, you can render the template from within the body of a view callable like so:

1 from pyramid.renderers import render_to_response


2

3 def sample_view(request):
4 return render_to_response('templates/foo.pt',
5 {'foo':1, 'bar':2},
6 request=request)

0.3. Narrative Documentation 441


The Pyramid Web Framework, Version 1.9.4

The sample_view view callable function above returns a response object which contains the body of the
templates/foo.pt template. In this case, the templates directory should live in the same directory
as the module containing the sample_view function. The template author will have the names foo and
bar available as top-level names for replacement or comparison purposes.

In the example above, the path templates/foo.pt is relative to the directory containing the file
which defines the view configuration. In this case, this is the directory containing the file that de-
fines the sample_view function. Although a renderer path is usually just a simple relative path-
name, a path named as a renderer can be absolute, starting with a slash on UNIX or a drive letter
prefix on Windows. The path can alternatively be an asset specification in the form some.dotted.
package_name:relative/path. This makes it possible to address template assets which live in
another package. For example:

1 from pyramid.renderers import render_to_response


2

3 def sample_view(request):
4 return render_to_response('mypackage:templates/foo.pt',
5 {'foo':1, 'bar':2},
6 request=request)

An asset specification points at a file within a Python package. In this case, it points at a file named foo.
pt within the templates directory of the mypackage package. Using an asset specification instead of
a relative template name is usually a good idea, because calls to render_to_response() using asset
specifications will continue to work properly if you move the code containing them to another location.

In the examples above we pass in a keyword argument named request representing the current Pyramid
request. Passing a request keyword argument will cause the render_to_response function to supply
the renderer with more correct system values (see System Values Used During Rendering), because most
of the information required to compose proper system values is present in the request. If your template
relies on the name request or context, or if you’ve configured special renderer globals, make sure to
pass request as a keyword argument in every call to a pyramid.renderers.render_* function.

Every view must return a response object, except for views which use a renderer named via view configu-
ration (which we’ll see shortly). The pyramid.renderers.render_to_response() function is
a shortcut function that actually returns a response object. This allows the example view above to simply
return the result of its call to render_to_response() directly.

Obviously not all APIs you might call to get response data will return a response object. For example, you
might render one or more templates to a string that you want to use as response data. The pyramid.
renderers.render() API renders a template to a string. We can manufacture a response object
directly, and use that string as the body of the response:

442 Contents
The Pyramid Web Framework, Version 1.9.4

1 from pyramid.renderers import render


2 from pyramid.response import Response
3

4 def sample_view(request):
5 result = render('mypackage:templates/foo.pt',
6 {'foo':1, 'bar':2},
7 request=request)
8 response = Response(result)
9 return response

Because view callable functions are typically the only code in Pyramid that need to know anything about
templates, and because view functions are very simple Python, you can use whatever templating system
with which you’re most comfortable within Pyramid. Install the templating system, import its API func-
tions into your views module, use those APIs to generate a string, then return that string as the body of a
Pyramid Response object.

For example, here’s an example of using ”raw” Mako from within a Pyramid view:

1 from mako.template import Template


2 from pyramid.response import Response
3

4 def make_view(request):
5 template = Template(filename='/templates/template.mak')
6 result = template.render(name=request.params['name'])
7 response = Response(result)
8 return response

You probably wouldn’t use this particular snippet in a project, because it’s easier to use the supported Mako
bindings. But if your favorite templating system is not supported as a renderer extension for Pyramid, you
can create your own simple combination as shown above.

If you use third-party templating languages without cooperating Pyramid bindings directly within
view callables, the auto-template-reload strategy explained in Automatically Reloading Templates will not
be available, nor will the template asset overriding capability explained in Overriding Assets be available,
nor will it be possible to use any template using that language as a renderer. However, it’s reasonably easy
to write custom templating system binding packages for use under Pyramid so that templates written in the
language can be used as renderers. See Adding and Changing Renderers for instructions on how to create
your own template renderer and Available Add-On Template System Bindings for example packages.

0.3. Narrative Documentation 443


The Pyramid Web Framework, Version 1.9.4

If you need more control over the status code and content-type, or other response attributes from views
that use direct templating, you may set attributes on the response that influence these values.

Here’s an example of changing the content-type and status of the response object returned by
render_to_response():

1 from pyramid.renderers import render_to_response


2

3 def sample_view(request):
4 response = render_to_response('templates/foo.pt',
5 {'foo':1, 'bar':2},
6 request=request)
7 response.content_type = 'text/plain'
8 response.status_int = 204
9 return response

Here’s an example of manufacturing a response object using the result of render() (a string):

1 from pyramid.renderers import render


2 from pyramid.response import Response
3

4 def sample_view(request):
5 result = render('mypackage:templates/foo.pt',
6 {'foo':1, 'bar':2},
7 request=request)
8 response = Response(result)
9 response.content_type = 'text/plain'
10 return response

System Values Used During Rendering

When a template is rendered using render_to_response() or render(), or a renderer= argu-


ment to view configuration (see Templates Used as Renderers via Configuration), the renderer representing
the template will be provided with a number of system values. These values are provided to the template:

request The value provided as the request keyword argument to render_to_response or


render or the request object passed to the view when the renderer= argument to view con-
figuration is being used to render the template.

req An alias for request.

444 Contents
The Pyramid Web Framework, Version 1.9.4

context The current Pyramid context if request was provided as a keyword argument to
render_to_response or render, or None if the request keyword argument was not pro-
vided. This value will always be provided if the template is rendered as the result of a renderer=
argument to the view configuration being used.

get_csrf_token() A convenience function to access the current CSRF token. See Using the
get_csrf_token global in templates for more information.

renderer_name The renderer name used to perform the rendering, e.g., mypackage:templates/
foo.pt.

renderer_info An object implementing the pyramid.interfaces.IRendererInfo inter-


face. Basically, an object with the following attributes: name, package, and type.

view The view callable object that was used to render this template. If the view callable is a method of
a class-based view, this will be an instance of the class that the method was defined on. If the view
callable is a function or instance, it will be that function or instance. Note that this value will only
be automatically present when a template is rendered as a result of a renderer= argument; it will
be None when the render_to_response or render APIs are used.

You can define more values which will be passed to every template executed as a result of rendering by
defining renderer globals.

What any particular renderer does with these system values is up to the renderer itself, but most template
renderers make these names available as top-level template variables.

Templates Used as Renderers via Configuration

An alternative to using render_to_response() to render templates manually in your view callable


code is to specify the template as a renderer in your view configuration. This can be done with any of the
templating languages supported by Pyramid.

To use a renderer via view configuration, specify a template asset specification as the renderer argu-
ment, or attribute to the view configuration of a view callable. Then return a dictionary from that view
callable. The dictionary items returned by the view callable will be made available to the renderer template
as top-level names.

The association of a template as a renderer for a view configuration makes it possible to replace code within
a view callable that handles the rendering of a template.

Here’s an example of using a view_config decorator to specify a view configuration that names a
template renderer:

0.3. Narrative Documentation 445


The Pyramid Web Framework, Version 1.9.4

1 from pyramid.view import view_config


2

3 @view_config(renderer='templates/foo.pt')
4 def my_view(request):
5 return {'foo':1, 'bar':2}

You do not need to supply the request value as a key in the dictionary result returned from a
renderer-configured view callable. Pyramid automatically supplies this value for you, so that the ”most
correct” system values are provided to the renderer.

The renderer argument to the @view_config configuration decorator shown above is the
template path. In the example above, the path templates/foo.pt is relative. Relative to what,
you ask? Because we’re using a Chameleon renderer, it means ”relative to the directory in which the
file that defines the view configuration lives”. In this case, this is the directory containing the file that
defines the my_view function.

Similar renderer configuration can be done imperatively. See Writing View Callables Which Use a Ren-
derer.

See also:

See also Built-in Renderers.

Although a renderer path is usually just a simple relative pathname, a path named as a renderer can be
absolute, starting with a slash on UNIX or a drive letter prefix on Windows. The path can alternatively
be an asset specification in the form some.dotted.package_name:relative/path, making it
possible to address template assets which live in another package.

Not just any template from any arbitrary templating system may be used as a renderer. Bindings must exist
specifically for Pyramid to use a templating language template as a renderer.

446 Contents
The Pyramid Web Framework, Version 1.9.4

Why Use a Renderer via View Configuration

Using a renderer in view configuration is usually a better way to render templates than using any ren-
dering API directly from within a view callable because it makes the view callable more unit-testable.
Views which use templating or rendering APIs directly must return a Response object. Making testing
assertions about response objects is typically an indirect process, because it means that your test code
often needs to somehow parse information out of the response body (often HTML). View callables con-
figured with renderers externally via view configuration typically return a dictionary, as above. Making
assertions about results returned in a dictionary is almost always more direct and straightforward than
needing to parse HTML.

By default, views rendered via a template renderer return a Response object which has a status code of
200 OK, and a content-type of text/html. To vary attributes of the response of a view that uses a
renderer, such as the content-type, headers, or status attributes, you must use the API of the pyramid.
response.Response object exposed as request.response within the view before returning the
dictionary. See Varying Attributes of Rendered Responses for more information.

The same set of system values are provided to templates rendered via a renderer view configuration as
those provided to templates rendered imperatively. See System Values Used During Rendering.

Debugging Templates

A NameError exception resulting from rendering a template with an undefined variable (e.g.
${wrong}) might end up looking like this:

RuntimeError: Caught exception rendering template.


- Expression: ``wrong``
- Filename: /home/fred/env/proj/proj/templates/mytemplate.pt
- Arguments: renderer_name: proj:templates/mytemplate.pt
template: <PageTemplateFile - at 0x1d2ecf0>
xincludes: <XIncludes - at 0x1d3a130>
request: <Request - at 0x1d2ecd0>
project: proj
macros: <Macros - at 0x1d3aed0>
context: <MyResource None at 0x1d39130>
view: <function my_view at 0x1d23570>

NameError: wrong

The output tells you which template the error occurred in, as well as displaying the arguments passed to
the template itself.

0.3. Narrative Documentation 447


The Pyramid Web Framework, Version 1.9.4

Automatically Reloading Templates

It’s often convenient to see changes you make to a template file appear immediately without needing to
restart the application process. Pyramid allows you to configure your application development environment
so that a change to a template will be automatically detected, and the template will be reloaded on the next
rendering.

Auto-template-reload behavior is not recommended for production sites as it slows rendering


slightly; it’s usually only desirable during development.

In order to turn on automatic reloading of templates, you can use an environment variable or a configuration
file setting.

To use an environment variable, start your application under a shell using the
PYRAMID_RELOAD_TEMPLATES operating system environment variable set to 1, For example:

$ PYRAMID_RELOAD_TEMPLATES=1 $VENV/bin/pserve myproject.ini

To use a setting in the application .ini file for the same purpose, set the pyramid.
reload_templates key to true within the application’s configuration section, e.g.:

1 [app:main]
2 use = egg:MyProject
3 pyramid.reload_templates = true

Available Add-On Template System Bindings

The Pylons Project maintains several packages providing bindings to different templating languages in-
cluding the following:

Template Language Pyramid Bindings Default Extensions


Chameleon pyramid_chameleon .pt, .txt
Jinja2 pyramid_jinja2 .jinja2
Mako pyramid_mako .mak, .mako

448 Contents
The Pyramid Web Framework, Version 1.9.4

0.3.12 View Configuration

View lookup is the Pyramid subsystem responsible for finding and invoking a view callable. View configu-
ration controls how view lookup operates in your application. During any given request, view configuration
information is compared against request data by the view lookup subsystem in order to find the ”best” view
callable for that request.

In earlier chapters, you have been exposed to a few simple view configuration declarations without much
explanation. In this chapter we will explore the subject in detail.

Mapping a Resource or URL Pattern to a View Callable

A developer makes a view callable available for use within a Pyramid application via view configuration.
A view configuration associates a view callable with a set of statements that determine the set of circum-
stances which must be true for the view callable to be invoked.

A view configuration statement is made about information present in the context resource (or exception)
and the request.

View configuration is performed in one of two ways:

• By running a scan against application source code which has a pyramid.view.view_config


decorator attached to a Python object as per Adding View Configuration Using the @view_config
Decorator.

• By using the pyramid.config.Configurator.add_view() method as per Adding View


Configuration Using add_view().

View Configuration Parameters

All forms of view configuration accept the same general types of arguments.

Many arguments supplied during view configuration are view predicate arguments. View predicate argu-
ments used during view configuration are used to narrow the set of circumstances in which view lookup
will find a particular view callable.

View predicate attributes are an important part of view configuration that enables the view lookup subsys-
tem to find and invoke the appropriate view. The greater the number of predicate attributes possessed by
a view’s configuration, the more specific the circumstances need to be before the registered view callable

0.3. Narrative Documentation 449


The Pyramid Web Framework, Version 1.9.4

will be invoked. The fewer the number of predicates which are supplied to a particular view configuration,
the more likely it is that the associated view callable will be invoked. A view with five predicates will
always be found and evaluated before a view with two, for example.

This does not mean however, that Pyramid ”stops looking” when it finds a view registration with predicates
that don’t match. If one set of view predicates does not match, the ”next most specific” view (if any) is
consulted for predicates, and so on, until a view is found, or no view can be matched up with the request.
The first view with a set of predicates all of which match the request environment will be invoked.

If no view can be found with predicates which allow it to be matched up with the request, Pyramid will
return an error to the user’s browser, representing a ”not found” (404) page. See Changing the Not Found
View for more information about changing the default Not Found View.

Other view configuration arguments are non-predicate arguments. These tend to modify the response of
the view callable or prevent the view callable from being invoked due to an authorization policy. The
presence of non-predicate arguments in a view configuration does not narrow the circumstances in which
the view callable will be invoked.

Non-Predicate Arguments

permission The name of a permission that the user must possess in order to invoke the view callable.
See Configuring View Security for more information about view security and permissions.

If permission is not supplied, no permission is registered for this view (it’s accessible by any
caller).

attr The view machinery defaults to using the __call__ method of the view callable (or the function
itself, if the view callable is a function) to obtain a response. The attr value allows you to vary the
method attribute used to obtain the response. For example, if your view was a class, and the class
has a method named index and you wanted to use this method instead of the class’s __call__
method to return the response, you’d say attr="index" in the view configuration for the view.
This is most useful when the view definition is a class.

If attr is not supplied, None is used (implying the function itself if the view is a function, or the
__call__ callable attribute if the view is a class).

renderer Denotes the renderer implementation which will be used to construct a response from the
associated view callable’s return value.

See also:

450 Contents
The Pyramid Web Framework, Version 1.9.4

See also Renderers.

This is either a single string term (e.g., json) or a string implying a path or asset specification (e.g.,
templates/views.pt) naming a renderer implementation. If the renderer value does not
contain a dot (.), the specified string will be used to look up a renderer implementation, and that
renderer implementation will be used to construct a response from the view return value. If the
renderer value contains a dot (.), the specified term will be treated as a path, and the filename
extension of the last element in the path will be used to look up the renderer implementation, which
will be passed the full path.

When the renderer is a path—although a path is usually just a simple relative pathname (e.g.,
templates/foo.pt, implying that a template named ”foo.pt” is in the ”templates” directory
relative to the directory of the current package)—the path can be absolute, starting with a slash
on UNIX or a drive letter prefix on Windows. The path can alternatively be a asset specification
in the form some.dotted.package_name:relative/path, making it possible to address
template assets which live in a separate package.

The renderer attribute is optional. If it is not defined, the ”null” renderer is assumed (no rendering
is performed and the value is passed back to the upstream Pyramid machinery unchanged). Note that
if the view callable itself returns a response (see View Callable Responses), the specified renderer
implementation is never called.

http_cache When you supply an http_cache value to a view configuration, the Expires and
Cache-Control headers of a response generated by the associated view callable are modified.
The value for http_cache may be one of the following:

• A nonzero integer. If it’s a nonzero integer, it’s treated as a number of seconds. This num-
ber of seconds will be used to compute the Expires header and the Cache-Control:
max-age parameter of responses to requests which call this view. For example:
http_cache=3600 instructs the requesting browser to ’cache this response for an hour,
please’.

• A datetime.timedelta instance. If it’s a datetime.timedelta instance, it will be


converted into a number of seconds, and that number of seconds will be used to compute the
Expires header and the Cache-Control: max-age parameter of responses to requests
which call this view. For example: http_cache=datetime.timedelta(days=1)
instructs the requesting browser to ’cache this response for a day, please’.

• Zero (0). If the value is zero, the Cache-Control and Expires headers present in all
responses from this view will be composed such that client browser cache (and any intermediate
caches) are instructed to never cache the response.

0.3. Narrative Documentation 451


The Pyramid Web Framework, Version 1.9.4

• A two-tuple. If it’s a two-tuple (e.g., http_cache=(1, {'public':True})), the first


value in the tuple may be a nonzero integer or a datetime.timedelta instance. In either
case this value will be used as the number of seconds to cache the response. The second
value in the tuple must be a dictionary. The values present in the dictionary will be used
as input to the Cache-Control response header. For example: http_cache=(3600,
{'public':True}) means ’cache for an hour, and add public to the Cache-Control
header of the response’. All keys and values supported by the webob.cachecontrol.
CacheControl interface may be added to the dictionary. Supplying {'public':True}
is equivalent to calling response.cache_control.public = True.

Providing a non-tuple value as http_cache is equivalent to calling response.


cache_expires(value) within your view’s body.

Providing a two-tuple value as http_cache is equivalent to calling response.


cache_expires(value[0], **value[1]) within your view’s body.

If you wish to avoid influencing the Expires header, and instead wish to only influence
Cache-Control headers, pass a tuple as http_cache with the first element of None, i.e.,
(None, {'public':True}).

require_csrf

CSRF checks will affect any request method that is not defined as a ”safe” method by
RFC2616. In pratice this means that GET, HEAD, OPTIONS, and TRACE methods will
pass untouched and all others methods will require CSRF. This option is used in combination
with the pyramid.require_default_csrf setting to control which request parame-
ters are checked for CSRF tokens.

This feature requires a configured session factory.

If this option is set to True then CSRF checks will be enabled for POST requests
to this view. The required token will be whatever was specified by the pyramid.
require_default_csrf setting, or will fallback to csrf_token.

If this option is set to a string then CSRF checks will be enabled and it will be used as the
required token regardless of the pyramid.require_default_csrf setting.

If this option is set to False then CSRF checks will be disabled regardless of the pyramid.
require_default_csrf setting.

In addition, if this option is set to True or a string then CSRF origin checking will be enabled.

See Checking CSRF Tokens Automatically for more information.

New in version 1.7.

452 Contents
The Pyramid Web Framework, Version 1.9.4

wrapper The view name of a different view configuration which will receive the response body of
this view as the request.wrapped_body attribute of its own request, and the response re-
turned by this view as the request.wrapped_response attribute of its own request. Using
a wrapper makes it possible to ”chain” views together to form a composite response. The response
of the outermost wrapper view will be returned to the user. The wrapper view will be found as
any view is found. See View Configuration. The ”best” wrapper view will be found based on
the lookup ordering. ”Under the hood” this wrapper view is looked up via pyramid.view.
render_view_to_response(context, request, 'wrapper_viewname'). The
context and request of a wrapper view is the same context and request of the inner view.

If wrapper is not supplied, no wrapper view is used.

decorator A dotted Python name to a function (or the function itself) which will be used to deco-
rate the registered view callable. The decorator function will be called with the view callable as a
single argument. The view callable it is passed will accept (context, request). The deco-
rator must return a replacement view callable which also accepts (context, request). The
decorator may also be an iterable of decorators, in which case they will be applied one after the
other to the view, in reverse order. For example:

@view_config(..., decorator=(decorator2, decorator1))


def myview(request):
...

Is similar to decorating the view callable directly:

@view_config(...)
@decorator2
@decorator1
def myview(request):
...

An important distinction is that each decorator will receive a response object implementing
pyramid.interfaces.IResponse instead of the raw value returned from the view callable.
All decorators in the chain must return a response object or raise an exception:

def log_timer(wrapped):
def wrapper(context, request):
start = time.time()
response = wrapped(context, request)
duration = time.time() - start
response.headers['X-View-Time'] = '%.3f' % (duration,)
(continues on next page)

0.3. Narrative Documentation 453


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


log.info('view took %.3f seconds', duration)
return response
return wrapper

mapper A Python object or dotted Python name which refers to a view mapper, or None. By default it is
None, which indicates that the view should use the default view mapper. This plug-point is useful
for Pyramid extension developers, but it’s not very useful for ”civilians” who are just developing
stock Pyramid applications. Pay no attention to the man behind the curtain.

Predicate Arguments

These arguments modify view lookup behavior. In general the more predicate arguments that are supplied,
the more specific and narrower the usage of the configured view.

name The view name required to match this view callable. A name argument is typically only used when
your application uses traversal. Read Traversal to understand the concept of a view name.

If name is not supplied, the empty string is used (implying the default view).

context An object representing a Python class of which the context resource must be an instance or the
interface that the context resource must provide in order for this view to be found and called. This
predicate is true when the context resource is an instance of the represented class or if the context
resource provides the represented interface; it is otherwise false.

It is possible to pass an exception class as the context if your context may subclass an exception. In
this case two views will be registered. One will match normal incoming requests, and the other will
match as an exception view which only occurs when an exception is raised during the normal request
processing pipeline.

If context is not supplied, the value None, which matches any resource, is used.

exception_only

When this value is True, the context argument must be a subclass of Exception. This
flag indicates that only an exception view should be created, and that this view should not
match if the traversal context matches the context argument. If the context is a subclass
of Exception and this value is False (the default), then a view will be registered to match
the traversal context as well.

New in version 1.8.

454 Contents
The Pyramid Web Framework, Version 1.9.4

route_name If route_name is supplied, the view callable will be invoked only when the named route
has matched.

This value must match the name of a route configuration declaration (see URL Dispatch) that
must match before this view will be called. Note that the route configuration referred to by
route_name will usually have a *traverse token in the value of its pattern, representing a
part of the path that will be used by traversal against the result of the route’s root factory.

If route_name is not supplied, the view callable will only have a chance of being invoked if no
other route was matched. This is when the request/context pair found via resource location does not
indicate it matched any configured route.

request_type This value should be an interface that the request must provide in order for this view
to be found and called.

If request_type is not supplied, the value None is used, implying any request type.

This is an advanced feature, not often used by ”civilians”.

request_method This value can be either a string (such as "GET", "POST", "PUT", "DELETE",
"HEAD", or "OPTIONS") representing an HTTP REQUEST_METHOD or a tuple containing one or
more of these strings. A view declaration with this argument ensures that the view will only be called
when the method attribute of the request (i.e., the REQUEST_METHOD of the WSGI environment)
matches a supplied value.

Changed in version 1.4: The use of "GET" also implies that the view will respond to "HEAD".

If request_method is not supplied, the view will be invoked regardless of the


REQUEST_METHOD of the WSGI environment.

request_param This value can be any string or a sequence of strings. A view declaration with this
argument ensures that the view will only be called when the request has a key in the request.
params dictionary (an HTTP GET or POST variable) that has a name which matches the supplied
value.

If any value supplied has an = sign in it, e.g., request_param="foo=123", then the key (foo)
must both exist in the request.params dictionary, and the value must match the right hand side
of the expression (123) for the view to ”match” the current request.

If request_param is not supplied, the view will be invoked without consideration of keys and
values in the request.params dictionary.

0.3. Narrative Documentation 455


The Pyramid Web Framework, Version 1.9.4

match_param This param may be either a single string of the format ”key=value” or a tuple containing
one or more of these strings.

This argument ensures that the view will only be called when the request has key/value
pairs in its matchdict that equal those supplied in the predicate. For example,
match_param="action=edit" would require the action parameter in the matchdict
match the right hand side of the expression (edit) for the view to ”match” the current request.

If the match_param is a tuple, every key/value pair must match for the predicate to pass.

If match_param is not supplied, the view will be invoked without consideration of the keys and
values in request.matchdict.

New in version 1.2.

containment This value should be a reference to a Python class or interface that a parent object in the
context resource’s lineage must provide in order for this view to be found and called. The resources
in your resource tree must be ”location-aware” to use this feature.

If containment is not supplied, the interfaces and classes in the lineage are not considered when
deciding whether or not to invoke the view callable.

See Location-Aware Resources for more information about location-awareness.

xhr This value should be either True or False. If this value is specified and is True, the WSGI
environment must possess an HTTP_X_REQUESTED_WITH header (i.e., X-Requested-With)
that has the value XMLHttpRequest for the associated view callable to be found and called. This
is useful for detecting AJAX requests issued from jQuery, Prototype, and other Javascript libraries.

If xhr is not specified, the HTTP_X_REQUESTED_WITH HTTP header is not taken into consid-
eration when deciding whether or not to invoke the associated view callable.

accept The value of this argument represents a match query for one or more mimetypes in the Accept
HTTP request header. If this value is specified, it must be in one of the following forms: a mimetype
match token in the form text/plain, a wildcard mimetype match token in the form text/*,
or a match-all wildcard mimetype match token in the form */*. If any of the forms matches the
Accept header of the request, this predicate will be true.

If accept is not specified, the HTTP_ACCEPT HTTP header is not taken into consideration when
deciding whether or not to invoke the associated view callable.

456 Contents
The Pyramid Web Framework, Version 1.9.4

header This value represents an HTTP header name or a header name/value pair.

If header is specified, it must be a header name or a headername:headervalue pair.

If header is specified without a value (a bare header name only, e.g., If-Modified-Since),
the view will only be invoked if the HTTP header exists with any value in the request.

If header is specified, and possesses a name/value pair (e.g., User-Agent:Mozilla/.*),


the view will only be invoked if the HTTP header exists and the HTTP header matches the value
requested. When the headervalue contains a : (colon), it will be considered a name/value
pair (e.g., User-Agent:Mozilla/.* or Host:localhost). The value portion should be a
regular expression.

Whether or not the value represents a header name or a header name/value pair, the case of the
header name is not significant.

If header is not specified, the composition, presence, or absence of HTTP headers is not taken
into consideration when deciding whether or not to invoke the associated view callable.

path_info This value represents a regular expression pattern that will be tested against the
PATH_INFO WSGI environment variable to decide whether or not to call the associated view
callable. If the regex matches, this predicate will be True.

If path_info is not specified, the WSGI PATH_INFO is not taken into consideration when de-
ciding whether or not to invoke the associated view callable.

check_csrf If specified, this value should be one of None, True, False, or a string representing the
”check name”. If the value is True or a string, CSRF checking will be performed. If the value is
False or None, CSRF checking will not be performed.

If the value provided is a string, that string will be used as the ”check name”. If the value provided
is True, csrf_token will be used as the check name.

If CSRF checking is performed, the checked value will be the value of request.
POST[check_name]. This value will be compared against the value of request.session.
get_csrf_token(), and the check will pass if these two values are the same. If the check
passes, the associated view will be permitted to execute. If the check fails, the associated view will
not be permitted to execute.

Note that using this feature requires a session factory to have been configured.

New in version 1.4a2.

0.3. Narrative Documentation 457


The Pyramid Web Framework, Version 1.9.4

physical_path If specified, this value should be a string or a tuple representing the physical
path of the context found via traversal for this predicate to match as true. For example,
physical_path='/', physical_path='/a/b/c', or physical_path=('', 'a',
'b', 'c'). This is not a path prefix match or a regex, but a whole-path match. It’s useful when
you want to always potentially show a view when some object is traversed to, but you can’t be sure
about what kind of object it will be, so you can’t use the context predicate. The individual path
elements between slash characters or in tuple elements should be the Unicode representation of the
name of the resource and should not be encoded in any way.

New in version 1.4a3.

effective_principals If specified, this value should be a principal identifier or a sequence of


principal identifiers. If the pyramid.request.Request.effective_principals()
method indicates that every principal named in the argument list is present in the cur-
rent request, this predicate will return True; otherwise it will return False. For ex-
ample: effective_principals=pyramid.security.Authenticated or
effective_principals=('fred', 'group:admins').

New in version 1.4a4.

custom_predicates If custom_predicates is specified, it must be a sequence of references to


custom predicate callables. Use custom predicates when no set of predefined predicates do what you
need. Custom predicates can be combined with predefined predicates as necessary. Each custom
predicate callable should accept two arguments, context and request, and should return either
True or False after doing arbitrary evaluation of the context resource and/or the request. If all
callables return True, the associated view callable will be considered viable for a given request.

If custom_predicates is not specified, no custom predicates are used.

predicates Pass a key/value pair here to use a third-party predicate registered via pyramid.
config.Configurator.add_view_predicate(). More than one key/value pair can be
used at the same time. See View and Route Predicates for more information about third-party pred-
icates.

New in version 1.4a1.

Inverting Predicate Values

You can invert the meaning of any predicate value by wrapping it in a call to pyramid.config.not_.

458 Contents
The Pyramid Web Framework, Version 1.9.4

1 from pyramid.config import not_


2

3 config.add_view(
4 'mypackage.views.my_view',
5 route_name='ok',
6 request_method=not_('POST')
7 )

The above example will ensure that the view is called if the request method is not POST, at least if no other
view is more specific.

This technique of wrapping a predicate value in not_ can be used anywhere predicate values are accepted:

• pyramid.config.Configurator.add_view()

• pyramid.view.view_config()

New in version 1.5.

Adding View Configuration Using the @view_config Decorator

Using this feature tends to slow down application startup slightly, as more work is performed
at application startup to scan for view configuration declarations. For maximum startup performance,
use the view configuration method described in Adding View Configuration Using add_view() instead.

The view_config decorator can be used to associate view configuration information with a function,
method, or class that acts as a Pyramid view callable.

Here’s an example of the view_config decorator that lives within a Pyramid application module
views.py:

1 from resources import MyResource


2 from pyramid.view import view_config
3 from pyramid.response import Response
4

5 @view_config(route_name='ok', request_method='POST', permission=


,→'read')

6 def my_view(request):
7 return Response('OK')

0.3. Narrative Documentation 459


The Pyramid Web Framework, Version 1.9.4

Using this decorator as above replaces the need to add this imperative configuration stanza:

1 config.add_view('mypackage.views.my_view', route_name='ok',
2 request_method='POST', permission='read')

All arguments to view_config may be omitted. For example:

1 from pyramid.response import Response


2 from pyramid.view import view_config
3

4 @view_config()
5 def my_view(request):
6 """ My view """
7 return Response()

Such a registration as the one directly above implies that the view name will be my_view, registered with
a context argument that matches any resource type, using no permission, registered against requests
with any request method, request type, request param, route name, or containment.

The mere existence of a @view_config decorator doesn’t suffice to perform view configuration. All
that the decorator does is ”annotate” the function with your configuration declarations, it doesn’t process
them. To make Pyramid process your pyramid.view.view_config declarations, you must use the
scan method of a pyramid.config.Configurator:

1 # config is assumed to be an instance of the


2 # pyramid.config.Configurator class
3 config.scan()

Please see Declarative Configuration for detailed information about what happens when code is scanned
for configuration declarations resulting from use of decorators like view_config.

See pyramid.config for additional API arguments to the scan() method. For example, the method allows
you to supply a package argument to better control exactly which code will be scanned.

All arguments to the view_config decorator mean precisely the same thing as they would if they were
passed as arguments to the pyramid.config.Configurator.add_view() method save for the
view argument. Usage of the view_config decorator is a form of declarative configuration, while
pyramid.config.Configurator.add_view() is a form of imperative configuration. However,
they both do the same thing.

460 Contents
The Pyramid Web Framework, Version 1.9.4

@view_config Placement

A view_config decorator can be placed in various points in your application.

If your view callable is a function, it may be used as a function decorator:

1 from pyramid.view import view_config


2 from pyramid.response import Response
3

4 @view_config(route_name='edit')
5 def edit(request):
6 return Response('edited!')

If your view callable is a class, the decorator can also be used as a class decorator. All the arguments to
the decorator are the same when applied against a class as when they are applied against a function. For
example:

1 from pyramid.response import Response


2 from pyramid.view import view_config
3

4 @view_config(route_name='hello')
5 class MyView(object):
6 def __init__(self, request):
7 self.request = request
8

9 def __call__(self):
10 return Response('hello')

More than one view_config decorator can be stacked on top of any number of others. Each decorator
creates a separate view registration. For example:

1 from pyramid.view import view_config


2 from pyramid.response import Response
3

4 @view_config(route_name='edit')
5 @view_config(route_name='change')
6 def edit(request):
7 return Response('edited!')

This registers the same view under two different names.

The decorator can also be used against a method of a class:

0.3. Narrative Documentation 461


The Pyramid Web Framework, Version 1.9.4

1 from pyramid.response import Response


2 from pyramid.view import view_config
3

4 class MyView(object):
5 def __init__(self, request):
6 self.request = request
7

8 @view_config(route_name='hello')
9 def amethod(self):
10 return Response('hello')

When the decorator is used against a method of a class, a view is registered for the class, so the class
constructor must accept an argument list in one of two forms: either a single argument, request, or two
arguments, context, request.

The method which is decorated must return a response.

Using the decorator against a particular method of a class is equivalent to using the attr parameter in a
decorator attached to the class itself. For example, the above registration implied by the decorator being
used against the amethod method could be written equivalently as follows:

1 from pyramid.response import Response


2 from pyramid.view import view_config
3

4 @view_config(attr='amethod', route_name='hello')
5 class MyView(object):
6 def __init__(self, request):
7 self.request = request
8

9 def amethod(self):
10 return Response('hello')

Adding View Configuration Using add_view()

The pyramid.config.Configurator.add_view() method within pyramid.config is used to


configure a view ”imperatively” (without a view_config decorator). The arguments to this method
are very similar to the arguments that you provide to the view_config decorator. For example:

462 Contents
The Pyramid Web Framework, Version 1.9.4

1 from pyramid.response import Response


2

3 def hello_world(request):
4 return Response('hello!')
5

6 # config is assumed to be an instance of the


7 # pyramid.config.Configurator class
8 config.add_view(hello_world, route_name='hello')

The first argument, a view callable, is the only required argument. It must either be a Python object which
is the view itself or a dotted Python name to such an object. In the above example, the view callable
is the hello_world function.

When you use only add_view() to add view configurations, you don’t need to issue a scan in order for
the view configuration to take effect.

@view_defaults Class Decorator

New in version 1.3.

If you use a class as a view, you can use the pyramid.view.view_defaults class decorator on the
class to provide defaults to the view configuration information used by every @view_config decorator
that decorates a method of that class.

For instance, if you’ve got a class that has methods that represent ”REST actions”, all of which are mapped
to the same route but different request methods, instead of this:

1 from pyramid.view import view_config


2 from pyramid.response import Response
3

4 class RESTView(object):
5 def __init__(self, request):
6 self.request = request
7

8 @view_config(route_name='rest', request_method='GET')
9 def get(self):
10 return Response('get')
11

12 @view_config(route_name='rest', request_method='POST')
(continues on next page)

0.3. Narrative Documentation 463


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


13 def post(self):
14 return Response('post')
15

16 @view_config(route_name='rest', request_method='DELETE')
17 def delete(self):
18 return Response('delete')

You can do this:

1 from pyramid.view import view_defaults


2 from pyramid.view import view_config
3 from pyramid.response import Response
4

5 @view_defaults(route_name='rest')
6 class RESTView(object):
7 def __init__(self, request):
8 self.request = request
9

10 @view_config(request_method='GET')
11 def get(self):
12 return Response('get')
13

14 @view_config(request_method='POST')
15 def post(self):
16 return Response('post')
17

18 @view_config(request_method='DELETE')
19 def delete(self):
20 return Response('delete')

In the above example, we were able to take the route_name='rest' argument out of the call to each
individual @view_config statement because we used a @view_defaults class decorator to provide
the argument as a default to each view method it possessed.

Arguments passed to @view_config will override any default passed to @view_defaults.

The view_defaults class decorator can also provide defaults to the pyramid.config.
Configurator.add_view() directive when a decorated class is passed to that directive as its view
argument. For example, instead of this:

464 Contents
The Pyramid Web Framework, Version 1.9.4

1 from pyramid.response import Response


2 from pyramid.config import Configurator
3

4 class RESTView(object):
5 def __init__(self, request):
6 self.request = request
7

8 def get(self):
9 return Response('get')
10

11 def post(self):
12 return Response('post')
13

14 def delete(self):
15 return Response('delete')
16

17 def main(global_config, **settings):


18 config = Configurator()
19 config.add_route('rest', '/rest')
20 config.add_view(
21 RESTView, route_name='rest', attr='get', request_method='GET
,→')

22 config.add_view(
23 RESTView, route_name='rest', attr='post', request_method=
,→'POST')

24 config.add_view(
25 RESTView, route_name='rest', attr='delete', request_method=
,→'DELETE')

26 return config.make_wsgi_app()

To reduce the amount of repetition in the config.add_view statements, we can move the
route_name='rest' argument to a @view_defaults class decorator on the RESTView class:

1 from pyramid.view import view_defaults


2 from pyramid.response import Response
3 from pyramid.config import Configurator
4

5 @view_defaults(route_name='rest')
6 class RESTView(object):
7 def __init__(self, request):
8 self.request = request
(continues on next page)

0.3. Narrative Documentation 465


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


9

10 def get(self):
11 return Response('get')
12

13 def post(self):
14 return Response('post')
15

16 def delete(self):
17 return Response('delete')
18

19 def main(global_config, **settings):


20 config = Configurator()
21 config.add_route('rest', '/rest')
22 config.add_view(RESTView, attr='get', request_method='GET')
23 config.add_view(RESTView, attr='post', request_method='POST')
24 config.add_view(RESTView, attr='delete', request_method='DELETE
,→')

25 return config.make_wsgi_app()

pyramid.view.view_defaults accepts the same set of arguments that pyramid.view.


view_config does, and they have the same meaning. Each argument passed to view_defaults
provides a default for the view configurations of methods of the class it’s decorating.

Normal Python inheritance rules apply to defaults added via view_defaults. For example:

1 @view_defaults(route_name='rest')
2 class Foo(object):
3 pass
4

5 class Bar(Foo):
6 pass

The Bar class above will inherit its view defaults from the arguments passed to the view_defaults
decorator of the Foo class. To prevent this from happening, use a view_defaults decorator without
any arguments on the subclass:

1 @view_defaults(route_name='rest')
2 class Foo(object):
3 pass
4

(continues on next page)

466 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


5 @view_defaults()
6 class Bar(Foo):
7 pass

The view_defaults decorator only works as a class decorator; using it against a function or a method
will produce nonsensical results.

Configuring View Security

If an authorization policy is active, any permission attached to a view configuration found during view
lookup will be verified. This will ensure that the currently authenticated user possesses that permission
against the context resource before the view function is actually called. Here’s an example of specifying a
permission in a view configuration using add_view():

1 # config is an instance of pyramid.config.Configurator


2

3 config.add_route('add', '/add.html', factory='mypackage.Blog')


4 config.add_view('myproject.views.add_entry', route_name='add',
5 permission='add')

When an authorization policy is enabled, this view will be protected with the add permission. The view
will not be called if the user does not possess the add permission relative to the current context. Instead
the forbidden view result will be returned to the client as per Protecting Views with Permissions.

NotFound Errors

It’s useful to be able to debug NotFound error responses when they occur unexpectedly due to an ap-
plication registry misconfiguration. To debug these errors, use the PYRAMID_DEBUG_NOTFOUND envi-
ronment variable or the pyramid.debug_notfound configuration file setting. Details of why a view
was not found will be printed to stderr, and the browser representation of the error will include the same
information. See Environment Variables and .ini File Settings for more information about how, and where
to set these values.

0.3. Narrative Documentation 467


The Pyramid Web Framework, Version 1.9.4

Influencing HTTP Caching

New in version 1.1.


When a non-None http_cache argument is passed to a view configuration, Pyramid will set Expires
and Cache-Control response headers in the resulting response, causing browsers to cache the response
data for some time. See http_cache in Non-Predicate Arguments for the allowable values and what
they mean.
Sometimes it’s undesirable to have these headers set as the result of returning a response from a view, even
though you’d like to decorate the view with a view configuration decorator that has http_cache. Per-
haps there’s an alternative branch in your view code that returns a response that should never be cacheable,
while the ”normal” branch returns something that should always be cacheable. If this is the case, set the
prevent_auto attribute of the response.cache_control object to a non-False value. For ex-
ample, the below view callable is configured with a @view_config decorator that indicates any response
from the view should be cached for 3600 seconds. However, the view itself prevents caching from taking
place unless there’s a should_cache GET or POST variable:

from pyramid.view import view_config

@view_config(http_cache=3600)
def view(request):
response = Response()
if 'should_cache' not in request.params:
response.cache_control.prevent_auto = True
return response

Note that the http_cache machinery will overwrite or add to caching headers you set within the view
itself, unless you use prevent_auto.
You can also turn off the effect of http_cache entirely for the duration of a Pyramid application life-
time. To do so, set the PYRAMID_PREVENT_HTTP_CACHE environment variable or the pyramid.
prevent_http_cache configuration value setting to a true value. For more information, see Prevent-
ing HTTP Caching.
Note that setting pyramid.prevent_http_cache will have no effect on caching headers that your
application code itself sets. It will only prevent caching headers that would have been set by the Pyramid
HTTP caching machinery invoked as the result of the http_cache argument to view configuration.

Debugging View Configuration

See Displaying Matching Views for a Given URL for information about how to display each of the view
callables that might match for a given URL. This can be an effective way to figure out why a particular
view callable is being called instead of the one you’d like to be called.

468 Contents
The Pyramid Web Framework, Version 1.9.4

0.3.13 Static Assets

An asset is any file contained within a Python package which is not a Python source code file. For example,
each of the following is an asset:

• a GIF image file contained within a Python package or contained within any subdirectory of a Python
package.

• a CSS file contained within a Python package or contained within any subdirectory of a Python
package.

• a JavaScript source file contained within a Python package or contained within any subdirectory of
a Python package.

• A directory within a package that does not have an __init__.py in it (if it possessed an
__init__.py it would be a package).

• a Chameleon or Mako template file contained within a Python package.

The use of assets is quite common in most web development projects. For example, when you create a
Pyramid application using one of the available cookiecutters, as described in Creating the Project, the
directory representing the application contains a Python package. Within that Python package, there are
directories full of files which are static assets. For example, there’s a static directory which contains
.css, .js, and .gif files. These asset files are delivered when a user visits an application URL.

Understanding Asset Specifications

Let’s imagine you’ve created a Pyramid application that uses a Chameleon ZPT template via the
pyramid.renderers.render_to_response() API. For example, the application might ad-
dress the asset using the asset specification myapp:templates/some_template.pt using that API
within a views.py file inside a myapp package:

1 from pyramid.renderers import render_to_response


2 render_to_response('myapp:templates/some_template.pt', {}, request)

”Under the hood”, when this API is called, Pyramid attempts to make sense out of the string
myapp:templates/some_template.pt provided by the developer. This string is an asset speci-
fication. It is composed of two parts:

• The package name (myapp)

0.3. Narrative Documentation 469


The Pyramid Web Framework, Version 1.9.4

• The asset name (templates/some_template.pt), relative to the package directory.

The two parts are separated by a colon : character.

Pyramid uses the Python pkg_resources API to resolve the package name and asset name to an absolute
(operating system-specific) file name. It eventually passes this resolved absolute filesystem path to the
Chameleon templating engine, which then uses it to load, parse, and execute the template file.

There is a second form of asset specification: a relative asset specification. Instead of using an ”absolute”
asset specification which includes the package name, in certain circumstances you can omit the package
name from the specification. For example, you might be able to use templates/mytemplate.pt
instead of myapp:templates/some_template.pt. Such asset specifications are usually relative
to a ”current package”. The ”current package” is usually the package which contains the code that uses
the asset specification. Pyramid APIs which accept relative asset specifications typically describe to what
the asset is relative in their individual documentation.

Serving Static Assets

Pyramid makes it possible to serve up static asset files from a directory on a filesystem to an application
user’s browser. Use the pyramid.config.Configurator.add_static_view() to instruct
Pyramid to serve static assets, such as JavaScript and CSS files. This mechanism makes a directory of
static files available at a name relative to the application root URL, e.g., /static, or as an external URL.

add_static_view() cannot serve a single file, nor can it serve a directory of static files directly
relative to the root URL of a Pyramid application. For these features, see Advanced: Serving Static Assets
Using a View Callable.

Here’s an example of a use of add_static_view() that will serve files up from the /var/www/
static directory of the computer which runs the Pyramid application as URLs beneath the /static
URL prefix.

1 # config is an instance of pyramid.config.Configurator


2 config.add_static_view(name='static', path='/var/www/static')

The name represents a URL prefix. In order for files that live in the path directory to be served, a URL
that requests one of them must begin with that prefix. In the example above, name is static and path
is /var/www/static. In English this means that you wish to serve the files that live in /var/www/
static as sub-URLs of the /static URL prefix. Therefore, the file /var/www/static/foo.css
will be returned when the user visits your application’s URL /static/foo.css.

470 Contents
The Pyramid Web Framework, Version 1.9.4

A static directory named at path may contain subdirectories recursively, and any subdirectories may hold
files; these will be resolved by the static view as you would expect. The Content-Type header returned
by the static view for each particular type of file is dependent upon its file extension.

By default, all files made available via add_static_view() are accessible by completely anonymous
users. Simple authorization can be required, however. To protect a set of static files using a permission, in
addition to passing the required name and path arguments, also pass the permission keyword argu-
ment to add_static_view(). The value of the permission argument represents the permission
that the user must have relative to the current context when the static view is invoked. A user will be re-
quired to possess this permission to view any of the files represented by path of the static view. If your
static assets must be protected by a more complex authorization scheme, see Advanced: Serving Static
Assets Using a View Callable.

Here’s another example that uses an asset specification instead of an absolute path as the path argu-
ment. To convince add_static_view() to serve files up under the /static URL from the a/b/
c/static directory of the Python package named some_package, we can use a fully qualified asset
specification as the path:

1 # config is an instance of pyramid.config.Configurator


2 config.add_static_view(name='static', path='some_package:a/b/c/
,→static')

The path provided to add_static_view() may be a fully qualified asset specification or an absolute
path.

Instead of representing a URL prefix, the name argument of a call to add_static_view() can al-
ternately be a URL. Each of the examples we’ve seen so far have shown usage of the name argument as
a URL prefix. However, when name is a URL, static assets can be served from an external webserver.
In this mode, the name is used as the URL prefix when generating a URL using pyramid.request.
Request.static_url().

For example, add_static_view() may be fed a name argument which is http://example.


com/images:

1 # config is an instance of pyramid.config.Configurator


2 config.add_static_view(name='http://example.com/images',
3 path='mypackage:images')

Because add_static_view() is provided with a name argument that is the URL http://
example.com/images, subsequent calls to static_url() with paths that start with the path
argument passed to add_static_view() will generate a URL something like http://example.
com/images/logo.png. The external webserver listening on example.com must be itself config-
ured to respond properly to such a request. The static_url() API is discussed in more detail later in
this chapter.

0.3. Narrative Documentation 471


The Pyramid Web Framework, Version 1.9.4

Generating Static Asset URLs

When an add_static_view() method is used to register a static asset directory, a special helper API
named pyramid.request.Request.static_url() can be used to generate the appropriate URL
for an asset that lives in one of the directories named by the static registration path attribute.

For example, let’s assume you create a set of static declarations like so:

1 config.add_static_view(name='static1', path='mypackage:assets/1')
2 config.add_static_view(name='static2', path='mypackage:assets/2')

These declarations create URL-accessible directories which have URLs that begin with /static1 and /
static2, respectively. The assets in the assets/1 directory of the mypackage package are consulted
when a user visits a URL which begins with /static1, and the assets in the assets/2 directory of
the mypackage package are consulted when a user visits a URL which begins with /static2.

You needn’t generate the URLs to static assets ”by hand” in such a configuration. Instead, use the
static_url() API to generate them for you. For example:

1 from pyramid.renderers import render_to_response


2

3 def my_view(request):
4 css_url = request.static_url('mypackage:assets/1/foo.css')
5 js_url = request.static_url('mypackage:assets/2/foo.js')
6 return render_to_response('templates/my_template.pt',
7 dict(css_url=css_url, js_url=js_url),
8 request=request)

If the request ”application URL” of the running system is http://example.com, the css_url gener-
ated above would be: http://example.com/static1/foo.css. The js_url generated above
would be http://example.com/static2/foo.js.

One benefit of using the static_url() function rather than constructing static URLs ”by hand” is that
if you need to change the name of a static URL declaration, the generated URLs will continue to resolve
properly after the rename.

URLs may also be generated by static_url() to static assets that live outside the Pyramid application.
This will happen when the add_static_view() API associated with the path fed to static_url()
is a URL instead of a view name. For example, the name argument may be http://example.com
while the path given may be mypackage:images:

472 Contents
The Pyramid Web Framework, Version 1.9.4

1 config.add_static_view(name='http://example.com/images',
2 path='mypackage:images')

Under such a configuration, the URL generated by static_url for assets which begin with
mypackage:images will be prefixed with http://example.com/images:

1 request.static_url('mypackage:images/logo.png')
2 # -> http://example.com/images/logo.png

Using static_url() in conjunction with a add_static_view() makes it possible to put static


media on a separate webserver during production (if the name argument to add_static_view() is
a URL), while keeping static media package-internal and served by the development webserver during
development (if the name argument to add_static_view() is a URL prefix).
For example, we may define a custom setting named media_location which we can set to an external
URL in production when our assets are hosted on a CDN.

1 media_location = settings.get('media_location', 'static')


2

3 config = Configurator(settings=settings)
4 config.add_static_view(path='myapp:static', name=media_location)

Now we can optionally define the setting in our ini file:

1 # production.ini
2 [app:main]
3 use = egg:myapp#main
4

5 media_location = http://static.example.com/

It is also possible to serve assets that live outside of the source by referring to an absolute path on the
filesystem. There are two ways to accomplish this.
First, add_static_view() supports taking an absolute path directly instead of an asset spec. This
works as expected, looking in the file or folder of files and serving them up at some URL within your
application or externally. Unfortunately, this technique has a drawback in that it is not possible to use the
static_url() method to generate URLs, since it works based on an asset specification.
New in version 1.6.
The second approach, available in Pyramid 1.6+, uses the asset overriding APIs described in the Overriding
Assets section. It is then possible to configure a ”dummy” package which then serves its file or folder from
an absolute path.

0.3. Narrative Documentation 473


The Pyramid Web Framework, Version 1.9.4

config.add_static_view(path='myapp:static_images', name='static')
config.override_asset(to_override='myapp:static_images/',
override_with='/abs/path/to/images/')

From this configuration it is now possible to use static_url() to generate URLs to the data in the
folder by doing something like request.static_url('myapp:static_images/foo.png').
While it is not necessary that the static_images file or folder actually exist in the myapp package, it
is important that the myapp portion points to a valid package. If the folder does exist, then the overriden
folder is given priority, if the file’s name exists in both locations.

Cache Busting

New in version 1.6.

In order to maximize performance of a web application, you generally want to limit the number of times
a particular client requests the same static asset. Ideally a client would cache a particular static asset
”forever”, requiring it to be sent to the client a single time. The HTTP protocol allows you to send headers
with an HTTP response that can instruct a client to cache a particular asset for an amount of time. As long
as the client has a copy of the asset in its cache and that cache hasn’t expired, the client will use the cached
copy rather than request a new copy from the server. The drawback to sending cache headers to the client
for a static asset is that at some point the static asset may change, and then you’ll want the client to load a
new copy of the asset. Under normal circumstances you’d just need to wait for the client’s cached copy to
expire before they get the new version of the static resource.

A commonly used workaround to this problem is a technique known as cache busting. Cache busting
schemes generally involve generating a URL for a static asset that changes when the static asset changes.
This way headers can be sent along with the static asset instructing the client to cache the asset for a very
long time. When a static asset is changed, the URL used to refer to it in a web page also changes, so the
client sees it as a new resource and requests the asset, regardless of any caching policy set for the resource’s
old URL.

Pyramid can be configured to produce cache busting URLs for static assets using
add_cache_buster():

1 import time
2 from pyramid.static import QueryStringConstantCacheBuster
3

4 # config is an instance of pyramid.config.Configurator


5 config.add_static_view(name='static', path='mypackage:folder/static/
,→')

(continues on next page)

474 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


6 config.add_cache_buster(
7 'mypackage:folder/static/',
8 QueryStringConstantCacheBuster(str(int(time.time()))))

Adding the cachebuster instructs Pyramid to add the current time for a static asset to the query string in
the asset’s URL:

1 js_url = request.static_url('mypackage:folder/static/js/myapp.js')
2 # Returns: 'http://www.example.com/static/js/myapp.js?x=1445318121'

When the web server restarts, the time constant will change and therefore so will its URL.

Cache busting is an inherently complex topic as it integrates the asset pipeline and the web applica-
tion. It is expected and desired that application authors will write their own cache buster implementations
conforming to the properties of their own asset pipelines. See Customizing the Cache Buster for informa-
tion on writing your own.

Disabling the Cache Buster

It can be useful in some situations (e.g., development) to globally disable all configured cache busters with-
out changing calls to add_cache_buster(). To do this set the PYRAMID_PREVENT_CACHEBUST
environment variable or the pyramid.prevent_cachebust configuration value to a true value.

Customizing the Cache Buster

Calls to add_cache_buster() may use any object that implements the interface ICacheBuster.

Pyramid ships with a very simplistic QueryStringConstantCacheBuster, which adds an arbi-


trary token you provide to the query string of the asset’s URL. This is almost never what you want in
production as it does not allow fine-grained busting of individual assets.

In order to implement your own cache buster, you can write your own class from scratch which implements
the ICacheBuster interface. Alternatively you may choose to subclass one of the existing implementa-
tions. One of the most likely scenarios is you’d want to change the way the asset token is generated. To do
this just subclass QueryStringCacheBuster and define a tokenize(pathspec) method. Here
is an example which uses Git to get the hash of the current commit:

0.3. Narrative Documentation 475


The Pyramid Web Framework, Version 1.9.4

1 import os
2 import subprocess
3 from pyramid.static import QueryStringCacheBuster
4

5 class GitCacheBuster(QueryStringCacheBuster):
6 """
7 Assuming your code is installed as a Git checkout, as opposed␣
,→to an egg

8 from an egg repository like PYPI, you can use this cachebuster␣
,→to get

9 the current commit's SHA1 to use as the cache bust token.


10 """
11 def __init__(self, param='x', repo_path=None):
12 super(GitCacheBuster, self).__init__(param=param)
13 if repo_path is None:
14 repo_path = os.path.dirname(os.path.abspath(__file__))
15 self.sha1 = subprocess.check_output(
16 ['git', 'rev-parse', 'HEAD'],
17 cwd=repo_path).strip()
18

19 def tokenize(self, pathspec):


20 return self.sha1

A simple cache buster that modifies the path segment can be constructed as well:

1 import posixpath
2

3 class PathConstantCacheBuster(object):
4 def __init__(self, token):
5 self.token = token
6

7 def __call__(self, request, subpath, kw):


8 base_subpath, ext = posixpath.splitext(subpath)
9 new_subpath = base_subpath + self.token + ext
10 return new_subpath, kw

The caveat with this approach is that modifying the path segment changes the file name, and thus must
match what is actually on the filesystem in order for add_static_view() to find the file. It’s better to
use the ManifestCacheBuster for these situations, as described in the next section.

476 Contents
The Pyramid Web Framework, Version 1.9.4

Path Segments and Choosing a Cache Buster

Many caching HTTP proxies will fail to cache a resource if the URL contains a query string. Therefore, in
general, you should prefer a cache busting strategy which modifies the path segment rather than methods
which add a token to the query string.
You will need to consider whether the Pyramid application will be serving your static assets, whether
you are using an external asset pipeline to handle rewriting urls internal to the css/javascript, and how
fine-grained do you want the cache busting tokens to be.
In many cases you will want to host the static assets on another web server or externally on a CDN. In
these cases your Pyramid application may not even have access to a copy of the static assets. In order to
cache bust these assets you will need some information about them.
If you are using an external asset pipeline to generate your static files you should consider using the
ManifestCacheBuster. This cache buster can load a standard JSON formatted file generated by
your pipeline and use it to cache bust the assets. This has many performance advantages as Pyramid does
not need to look at the files to generate any cache busting tokens, but still supports fine-grained per-file
tokens.
Assuming an example manifest.json like:

{
"css/main.css": "css/main-678b7c80.css",
"images/background.png": "images/background-a8169106.png"
}

The following code would set up a cachebuster:

1 from pyramid.static import ManifestCacheBuster


2

3 config.add_static_view(
4 name='http://mycdn.example.com/',
5 path='mypackage:static')
6

7 config.add_cache_buster(
8 'mypackage:static/',
9 ManifestCacheBuster('myapp:static/manifest.json'))

It’s important to note that the cache buster only handles generating cache-busted URLs for static assets. It
does NOT provide any solutions for serving those assets. For example, if you generated a URL for css/
main-678b7c80.css then that URL needs to be valid either by configuring add_static_view
properly to point to the location of the files or some other mechanism such as the files existing on your
CDN or rewriting the incoming URL to remove the cache bust tokens.

0.3. Narrative Documentation 477


The Pyramid Web Framework, Version 1.9.4

CSS and JavaScript source and cache busting

Often one needs to refer to images and other static assets inside CSS and JavaScript files. If cache busting is
active, the final static asset URL is not available until the static assets have been assembled. These URLs
cannot be handwritten. Below is an example of how to integrate the cache buster into the entire stack.
Remember, it is just an example and should be modified to fit your specific tools.

• First, process the files by using a precompiler which rewrites URLs to their final cache-busted form.
Then, you can use the ManifestCacheBuster to synchronize your asset pipeline with Pyramid,
allowing the pipeline to have full control over the final URLs of your assets.

Now that you are able to generate static URLs within Pyramid, you’ll need to handle URLs that are out of
our control. To do this you may use some of the following options to get started:

• Configure your asset pipeline to rewrite URL references inline in CSS and JavaScript. This is the
best approach because then the files may be hosted by Pyramid or an external CDN without having
to change anything. They really are static.

• Templatize JS and CSS, and call request.static_url() inside their template code. While
this approach may work in certain scenarios, it is not recommended because your static assets will
not really be static and are now dependent on Pyramid to be served correctly. See Advanced: Serving
Static Assets Using a View Callable for more information on this approach.

If your CSS and JavaScript assets use URLs to reference other assets it is recommended that you implement
an external asset pipeline that can rewrite the generated static files with new URLs containing cache busting
tokens. The machinery inside Pyramid will not help with this step as it has very little knowledge of the
asset types your application may use. The integration into Pyramid is simply for linking those assets into
your HTML and other dynamic content.

Advanced: Serving Static Assets Using a View Callable

For more flexibility, static assets can be served by a view callable which you register manually. For example,
if you’re using URL dispatch, you may want static assets to only be available as a fallback if no previous
route matches. Alternatively, you might like to serve a particular static asset manually, because its download
requires authentication.

Note that you cannot use the static_url() API to generate URLs against assets made accessible by
registering a custom static view.

478 Contents
The Pyramid Web Framework, Version 1.9.4

Root-Relative Custom Static View (URL Dispatch Only)

The pyramid.static.static_view helper class generates a Pyramid view callable. This view
callable can serve static assets from a directory. An instance of this class is actually used by the
add_static_view() configuration method, so its behavior is almost exactly the same once it’s con-
figured.

The following example will not work for applications that use traversal; it will only work if
you use URL dispatch exclusively. The root-relative route we’ll be registering will always be matched
before traversal takes place, subverting any views registered via add_view (at least those without a
route_name). A static_view static view cannot be made root-relative when you use traversal
unless it’s registered as a Not Found View.

To serve files within a directory located on your filesystem at /path/to/static/dir as the result of
a ”catchall” route hanging from the root that exists at the end of your routing table, create an instance of
the static_view class inside a static.py file in your application root as below.

1 from pyramid.static import static_view


2 static_view = static_view('/path/to/static/dir', use_subpath=True)

For better cross-system flexibility, use an asset specification as the argument to static_view
instead of a physical absolute filesystem path, e.g., mypackage:static, instead of /path/to/
mypackage/static.

Subsequently, you may wire the files that are served by this view up to be accessible as /<filename>
using a configuration method in your application’s startup code.

1 # .. every other add_route declaration should come


2 # before this one, as it will, by default, catch all requests
3

4 config.add_route('catchall_static', '/*subpath')
5 config.add_view('myapp.static.static_view', route_name='catchall_
,→static')

The special name *subpath above is used by the static_view view callable to signify the path of
the file relative to the directory you’re serving.

0.3. Narrative Documentation 479


The Pyramid Web Framework, Version 1.9.4

Registering a View Callable to Serve a ”Static” Asset

You can register a simple view callable to serve a single static asset. To do so, do things ”by hand”. First
define the view callable.

1 import os
2 from pyramid.response import FileResponse
3

4 def favicon_view(request):
5 here = os.path.dirname(__file__)
6 icon = os.path.join(here, 'static', 'favicon.ico')
7 return FileResponse(icon, request=request)

The above bit of code within favicon_view computes ”here”, which is a path relative to the Python file
in which the function is defined. It then creates a pyramid.response.FileResponse using the file
path as the response’s path argument and the request as the response’s request argument. pyramid.
response.FileResponse will serve the file as quickly as possible when it’s used this way. It makes
sure to set the right content length and content_type, too, based on the file extension of the file you pass.

You might register such a view via configuration as a view callable that should be called as the result of a
traversal:

1 config.add_view('myapp.views.favicon_view', name='favicon.ico')

Or you might register it to be the view callable for a particular route:

1 config.add_route('favicon', '/favicon.ico')
2 config.add_view('myapp.views.favicon_view', route_name='favicon')

Because this is a simple view callable, it can be protected with a permission or can be configured to respond
under different circumstances using view predicate arguments.

Overriding Assets

It can often be useful to override specific assets from ”outside” a given Pyramid application. For example,
you may wish to reuse an existing Pyramid application more or less unchanged. However, some specific
template file owned by the application might have inappropriate HTML, or some static asset (such as a logo
file or some CSS file) might not be appropriate. You could just fork the application entirely, but it’s often

480 Contents
The Pyramid Web Framework, Version 1.9.4

more convenient to just override the assets that are inappropriate and reuse the application ”as is”. This
is particularly true when you reuse some ”core” application over and over again for some set of customers
(such as a CMS application, or some bug tracking application), and you want to make arbitrary visual
modifications to a particular application deployment without forking the underlying code.

To this end, Pyramid contains a feature that makes it possible to ”override” one asset with one or
more other assets. In support of this feature, a Configurator API exists named pyramid.config.
Configurator.override_asset(). This API allows you to override the following kinds of assets
defined in any Python package:

• Individual template files.

• A directory containing multiple template files.

• Individual static files served up by an instance of the pyramid.static.static_view helper


class.

• A directory of static files served up by an instance of the pyramid.static.static_view


helper class.

• Any other asset (or set of assets) addressed by code that uses the setuptools pkg_resources API.

The override_asset API

An individual call to override_asset() can override a single asset. For example:

1 config.override_asset(
2 to_override='some.package:templates/mytemplate.pt',
3 override_with='another.package:othertemplates/anothertemplate.pt
,→')

The string value passed to both to_override and override_with sent to the override_asset
API is called an asset specification. The colon separator in a specification separates the package name from
the asset name. The colon and the following asset name are optional. If they are not specified, the override
attempts to resolve every lookup into a package from the directory of another package. For example:

1 config.override_asset(to_override='some.package',
2 override_with='another.package')

Individual subdirectories within a package can also be overridden:

0.3. Narrative Documentation 481


The Pyramid Web Framework, Version 1.9.4

1 config.override_asset(to_override='some.package:templates/',
2 override_with='another.package:othertemplates/
,→')

If you wish to override a directory with another directory, you must make sure to attach the slash to the end
of both the to_override specification and the override_with specification. If you fail to attach a
slash to the end of a specification that points to a directory, you will get unexpected results.

You cannot override a directory specification with a file specification, and vice versa; a startup error will
occur if you try. You cannot override an asset with itself; a startup error will occur if you try.

Only individual package assets may be overridden. Overrides will not traverse through subpack-
ages within an overridden package. This means that if you want to override assets for both some.
package:templates, and some.package.views:templates, you will need to register two
overrides.

The package name in a specification may start with a dot, meaning that the package is relative to the package
in which the configuration construction file resides (or the package argument to the Configurator
class construction). For example:

1 config.override_asset(to_override='.subpackage:templates/',
2 override_with='another.package:templates/')

Multiple calls to override_asset which name a shared to_override but a different


override_with specification can be ”stacked” to form a search path. The first asset that exists in
the search path will be used; if no asset exists in the override path, the original asset is used.

Asset overrides can actually override assets other than templates and static files. Any soft-
ware which uses the pkg_resources.get_resource_filename(), pkg_resources.
get_resource_stream(), or pkg_resources.get_resource_string() APIs will obtain
an overridden file when an override is used.

New in version 1.6: As of Pyramid 1.6, it is also possible to override an asset by supplying an absolute
path to a file or directory. This may be useful if the assets are not distributed as part of a Python package.

482 Contents
The Pyramid Web Framework, Version 1.9.4

Cache Busting and Asset Overrides

Overriding static assets that are being hosted using pyramid.config.Configurator.


add_static_view() can affect your cache busting strategy when using any cache busters that
are asset-aware such as pyramid.static.ManifestCacheBuster. What sets asset-aware cache
busters apart is that they have logic tied to specific assets. For example, a manifest is only generated for
a specific set of pre-defined assets. Now, imagine you have overridden an asset defined in this manifest
with a new, unknown version. By default, the cache buster will be invoked for an asset it has never seen
before and will likely end up returning a cache busting token for the original asset rather than the asset
that will actually end up being served! In order to get around this issue, it’s possible to attach a different
pyramid.interfaces.ICacheBuster implementation to the new assets. This would cause the
original assets to be served by their manifest, and the new assets served by their own cache buster. To
do this, pyramid.config.Configurator.add_cache_buster() supports an explicit
option. For example:

1 from pyramid.static import ManifestCacheBuster


2

3 # define a static view for myapp:static assets


4 config.add_static_view('static', 'myapp:static')
5

6 # setup a cache buster for your app based on the myapp:static assets
7 my_cb = ManifestCacheBuster('myapp:static/manifest.json')
8 config.add_cache_buster('myapp:static', my_cb)
9

10 # override an asset
11 config.override_asset(
12 to_override='myapp:static/background.png',
13 override_with='theme:static/background.png')
14

15 # override the cache buster for theme:static assets


16 theme_cb = ManifestCacheBuster('theme:static/manifest.json')
17 config.add_cache_buster('theme:static', theme_cb, explicit=True)

In the above example there is a default cache buster, my_cb, for all assets served from the
myapp:static folder. This would also affect theme:static/background.png when gener-
ating URLs via request.static_url('myapp:static/background.png').

The theme_cb is defined explicitly for any assets loaded from the theme:static folder.
Explicit cache busters have priority and thus theme_cb would be invoked for request.
static_url('myapp:static/background.png'), but my_cb would be used for any other
assets like request.static_url('myapp:static/favicon.ico').

0.3. Narrative Documentation 483


The Pyramid Web Framework, Version 1.9.4

0.3.14 Request and Response Objects

This chapter is adapted from a portion of the WebOb documentation, originally written by Ian
Bicking.

Pyramid uses the WebOb package as a basis for its request and response object implementations. The
request object that is passed to a Pyramid view is an instance of the pyramid.request.Request
class, which is a subclass of webob.Request. The response returned from a Pyramid view renderer is an
instance of the pyramid.response.Response class, which is a subclass of the webob.Response
class. Users can also return an instance of pyramid.response.Response directly from a view as
necessary.

WebOb is a project separate from Pyramid with a separate set of authors and a fully separate set of docu-
mentation. Pyramid adds some functionality to the standard WebOb request, which is documented in the
pyramid.request API documentation.

WebOb provides objects for HTTP requests and responses. Specifically it does this by wrapping the WSGI
request environment and response status, header list, and app_iter (body) values.

WebOb request and response objects provide many conveniences for parsing WSGI requests and forming
WSGI responses. WebOb is a nice way to represent ”raw” WSGI requests and responses. However, we
won’t cover that use case in this document, as users of Pyramid don’t typically need to use the WSGI-related
features of WebOb directly. The reference documentation shows many examples of creating requests and
using response objects in this manner, however.

Request

The request object is a wrapper around the WSGI environ dictionary. This dictionary contains keys for
each header, keys that describe the request (including the path and query string), a file-like object for the
request body, and a variety of custom keys. You can always access the environ with req.environ.

Some of the most important and interesting attributes of a request object are below.

req.method The request method, e.g., GET, POST

req.GET A multidict with all the variables in the query string.

req.POST A multidict with all the variables in the request body. This only has variables if the request
was a POST and it is a form submission.

484 Contents
The Pyramid Web Framework, Version 1.9.4

req.params A multidict with a combination of everything in req.GET and req.POST.

req.body The contents of the body of the request. This contains the entire request body as a string.
This is useful when the request is a POST that is not a form submission, or a request like a PUT.
You can also get req.body_file for a file-like object.

req.json_body The JSON-decoded contents of the body of the request. See Dealing with a JSON-
Encoded Request Body.

req.cookies A simple dictionary of all the cookies.

req.headers A dictionary of all the headers. This dictionary is case-insensitive.

req.urlvars and req.urlargs req.urlvars are the keyword parameters associated with the
request URL. req.urlargs are the positional parameters. These are set by products like Routes
and Selector.

Also for standard HTTP request headers, there are usually attributes such as req.accept_language,
req.content_length, and req.user_agent. These properties expose the parsed form of
each header, for whatever parsing makes sense. For instance, req.if_modified_since returns a
datetime object (or None if the header is was not provided).

Full API documentation for the Pyramid request object is available in pyramid.request.

Special Attributes Added to the Request by Pyramid

In addition to the standard WebOb attributes, Pyramid adds special attributes to every re-
quest: context, registry, root, subpath, traversed, view_name, virtual_root,
virtual_root_path, session, matchdict, and matched_route. These attributes are docu-
mented further within the pyramid.request.Request API documentation.

0.3. Narrative Documentation 485


The Pyramid Web Framework, Version 1.9.4

URLs

In addition to these attributes, there are several ways to get the URL of the request and its parts. We’ll show
various values for an example URL http://localhost/app/blog?id=10, where the application
is mounted at http://localhost/app.

req.url The full request URL with query string, e.g., http://localhost/app/blog?id=10

req.host The host information in the URL, e.g., localhost

req.host_url The URL with the host, e.g., http://localhost

req.application_url The URL of the application (just the SCRIPT_NAME portion of the path,
not PATH_INFO), e.g., http://localhost/app

req.path_url The URL of the application including the PATH_INFO, e.g., http://localhost/
app/blog

req.path The URL including PATH_INFO without the host or scheme, e.g., /app/blog

req.path_qs The URL including PATH_INFO and the query string, e.g, /app/blog?id=10

req.query_string The query string in the URL, e.g., id=10

req.relative_url(url, to_application=False) Gives a URL relative to the current


URL. If to_application is True, then resolves it relative to req.application_url.

Methods

There are methods of request objects documented in pyramid.request.Request but you’ll find that
you won’t use very many of them. Here are a couple that might be useful:

Request.blank(base_url) Creates a new request with blank information, based at the given URL.
This can be useful for subrequests and artificial requests. You can also use req.copy() to copy an
existing request, or for subrequests req.copy_get() which copies the request but always turns
it into a GET (which is safer to share for subrequests).

req.get_response(wsgi_application) This method calls the given WSGI application with


this request, and returns a pyramid.response.Response object. You can also use this for
subrequests or testing.

486 Contents
The Pyramid Web Framework, Version 1.9.4

Text (Unicode)

Many of the properties of the request object will be text values (unicode under Python 2 or str
under Python 3) if the request encoding/charset is provided. If it is provided, the values in req.
POST, req.GET, req.params, and req.cookies will contain text. The client can indicate
the charset with something like Content-Type: application/x-www-form-urlencoded;
charset=utf8, but browsers seldom set this. You can reset the charset of an existing request
with newreq = req.decode('utf-8'), or during instantiation with Request(environ,
charset='utf8').

Multidict

Several attributes of a WebOb request are multidict structures (such as request.GET, request.
POST, and request.params). A multidict is a dictionary where a key can have multiple values. The
quintessential example is a query string like ?pref=red&pref=blue; the pref variable has two val-
ues: red and blue.

In a multidict, when you do request.GET['pref'], you’ll get back only "blue" (the last value
of pref). This returned result might not be expected—sometimes returning a string, and sometimes
returning a list—and may be cause of frequent exceptions. If you want all the values back, use request.
GET.getall('pref'). If you want to be sure there is one and only one value, use request.GET.
getone('pref'), which will raise an exception if there is zero or more than one value for pref.

When you use operations like request.GET.items(), you’ll get back something like [('pref',
'red'), ('pref', 'blue')]. All the key/value pairs will show up. Similarly request.GET.
keys() returns ['pref', 'pref']. Multidict is a view on a list of tuples; all the keys are ordered,
and all the values are ordered.

API documentation for a multidict exists as pyramid.interfaces.IMultiDict.

Dealing with a JSON-Encoded Request Body

New in version 1.1.

pyramid.request.Request.json_body is a property that returns a JSON-decoded representa-


tion of the request body. If the request does not have a body, or the body is not a properly JSON-encoded
value, an exception will be raised when this attribute is accessed.

This attribute is useful when you invoke a Pyramid view callable via, for example, jQuery’s $.ajax
function, which has the potential to send a request with a JSON-encoded body.

Using request.json_body is equivalent to:

0.3. Narrative Documentation 487


The Pyramid Web Framework, Version 1.9.4

from json import loads


loads(request.body, encoding=request.charset)

Here’s how to construct an AJAX request in JavaScript using jQuery that allows you to use the request.
json_body attribute when the request is sent to a Pyramid application:

jQuery.ajax({type:'POST',
url: 'http://localhost:6543/', // the pyramid server
data: JSON.stringify({'a':1}),
contentType: 'application/json; charset=utf-8'});

When such a request reaches a view in your application, the request.json_body attribute will be
available in the view callable body.

@view_config(renderer='string')
def aview(request):
print(request.json_body)
return 'OK'

For the above view, printed to the console will be:

{u'a': 1}

For bonus points, here’s a bit of client-side code that will produce a request that has a body suitable for
reading via request.json_body using Python’s urllib2 instead of a JavaScript AJAX request:

import urllib2
import json

json_payload = json.dumps({'a':1})
headers = {'Content-Type':'application/json; charset=utf-8'}
req = urllib2.Request('http://localhost:6543/', json_payload,␣
,→headers)

resp = urllib2.urlopen(req)

If you are doing Cross-origin resource sharing (CORS), then the standard requires the browser to do a
pre-flight HTTP OPTIONS request. The easiest way to handle this is to add an extra view_config for
the same route, with request_method set to OPTIONS, and set the desired response header before
returning. You can find examples of response headers Access control CORS, Preflighted requests.

488 Contents
The Pyramid Web Framework, Version 1.9.4

Cleaning up after a Request

Sometimes it’s required to perform some cleanup at the end of a request when a database connection is
involved.
For example, let’s say you have a mypackage Pyramid application package that uses SQLAlchemy, and
you’d like the current SQLAlchemy database session to be removed after each request. Put the following
in the mypackage.__init__ module:

1 from mypackage.models import DBSession


2

3 from pyramid.events import subscriber


4 from pyramid.events import NewRequest
5

6 def cleanup_callback(request):
7 DBSession.remove()
8

9 @subscriber(NewRequest)
10 def add_cleanup_callback(event):
11 event.request.add_finished_callback(cleanup_callback)

Registering the cleanup_callback finished callback at the start of a request (by causing the
add_cleanup_callback to receive a pyramid.events.NewRequest event at the start of each
request) will cause the DBSession to be removed whenever request processing has ended. Note that in the
example above, for the pyramid.events.subscriber decorator to work, the pyramid.config.
Configurator.scan() method must be called against your mypackage package during application
initialization.

This is only an example. In particular, it is not necessary to cause DBSession.remove to be


called in an application generated from a Pyramid cookiecutter, because these all use the pyramid_tm
package. The cleanup done by DBSession.remove is unnecessary when pyramid_tm middleware
is configured into the application.

More Details

More detail about the request object API is available as follows.


• pyramid.request.Request API documentation
• WebOb documentation. All methods and attributes of a webob.Request documented within the
WebOb documentation will work with request objects created by Pyramid.

0.3. Narrative Documentation 489


The Pyramid Web Framework, Version 1.9.4

Response

The Pyramid response object can be imported as pyramid.response.Response. This class is a


subclass of the webob.Response class. The subclass does not add or change any functionality, so the
WebOb Response documentation will be completely relevant for this class as well.
A response object has three fundamental parts:
response.status The response code plus reason message, like 200 OK. To set the code without a
message, use status_int, i.e., response.status_int = 200.
response.headerlist A list of all the headers, like [('Content-Type', 'text/html')].
There’s a case-insensitive multidict in response.headers that also allows you to access these
same headers.
response.app_iter An iterable (such as a list or generator) that will produce the content of the re-
sponse. This is also accessible as response.body (a string), response.text (a unicode ob-
ject, informed by response.charset), and response.body_file (a file-like object; writ-
ing to it appends to app_iter).
Everything else in the object typically derives from this underlying state. Here are some highlights:
response.content_type The content type not including the charset parameter.
Typical use: response.content_type = 'text/html'.
Default value: response.content_type = 'text/html'.
response.charset The charset parameter of the content-type, it also informs encoding in
response.text. response.content_type_params is a dictionary of all the parame-
ters.
response.set_cookie(name, value, max_age=None, path='/', ...) Set a
cookie. The keyword arguments control the various cookie parameters. The max_age argument
is the length for the cookie to live in seconds (you may also use a timedelta object). The Expires
key will also be set based on the value of max_age.
response.delete_cookie(name, path='/', domain=None) Delete a cookie from the
client. This sets max_age to 0 and the cookie value to ''.
response.cache_expires(seconds=0) This makes the response cacheable for the given num-
ber of seconds, or if seconds is 0 then the response is uncacheable (this also sets the Expires
header).
response(environ, start_response) The response object is a WSGI application. As an
application, it acts according to how you create it. It can do conditional responses if you pass
conditional_response=True when instantiating (or set that attribute later). It can also do
HEAD and Range requests.

490 Contents
The Pyramid Web Framework, Version 1.9.4

Headers

Like the request, most HTTP response headers are available as properties. These are parsed, so you can
do things like response.last_modified = os.path.getmtime(filename).

The details are available in the webob.response API documentation.

Instantiating the Response

Of course most of the time you just want to make a response. Generally any attribute of the response can
be passed in as a keyword argument to the class, e.g.:

1 from pyramid.response import Response


2 response = Response(body='hello world!', content_type='text/plain')

The status defaults to '200 OK'.

The value of content_type defaults to webob.response.Response.


default_content_type, which is text/html. You can subclass pyramid.response.
Response and set default_content_type to override this behavior.

Exception Responses

To facilitate error responses like 404 Not Found, the module pyramid.httpexceptions con-
tains classes for each kind of error response. These include boring but appropriate error bodies. The
exceptions exposed by this module, when used under Pyramid, should be imported from the pyramid.
httpexceptions module. This import location contains subclasses and replacements that mirror those
in the webob.exc module.

Each class is named pyramid.httpexceptions.HTTP*, where * is the reason for the error.
For instance, pyramid.httpexceptions.HTTPNotFound subclasses pyramid.response.
Response, so you can manipulate the instances in the same way. A typical example is:

1 from pyramid.httpexceptions import HTTPNotFound


2 from pyramid.httpexceptions import HTTPMovedPermanently
3

4 response = HTTPNotFound('There is no such resource')


5 # or:
6 response = HTTPMovedPermanently(location=new_url)

0.3. Narrative Documentation 491


The Pyramid Web Framework, Version 1.9.4

More Details

More details about the response object API are available in the pyramid.response documentation.
More details about exception responses are in the pyramid.httpexceptions API documentation.
The WebOb documentation is also useful.

0.3.15 Sessions

A session is a namespace which is valid for some period of continual activity that can be used to represent
a user’s interaction with a web application.

This chapter describes how to configure sessions, what session implementations Pyramid provides out of
the box, how to store and retrieve data from sessions, and a session-specific feature: flash messages.

Using the Default Session Factory

In order to use sessions, you must set up a session factory during your Pyramid configuration.

A very basic, insecure sample session factory implementation is provided in the Pyramid core. It uses a
cookie to store session information. This implementation has the following limitations:

• The session information in the cookies used by this implementation is not encrypted, so it can be
viewed by anyone with access to the cookie storage of the user’s browser or anyone with access to
the network along which the cookie travels.

• The maximum number of bytes that are storable in a serialized representation of the session is fewer
than 4000. This is suitable only for very small data sets.

It is digitally signed, however, and thus its data cannot easily be tampered with.

You can configure this session factory in your Pyramid application by using the pyramid.config.
Configurator.set_session_factory() method.

1 from pyramid.session import SignedCookieSessionFactory


2 my_session_factory = SignedCookieSessionFactory('itsaseekreet')
3

4 from pyramid.config import Configurator


5 config = Configurator()
6 config.set_session_factory(my_session_factory)

492 Contents
The Pyramid Web Framework, Version 1.9.4

By default the SignedCookieSessionFactory() implementation is unencrypted. You


should not use it when you keep sensitive information in the session object, as the information can
be easily read by both users of your application and third parties who have access to your users’ net-
work traffic. And, if you use this sessioning implementation, and you inadvertently create a cross-site
scripting vulnerability in your application, because the session data is stored unencrypted in a cookie,
it will also be easier for evildoers to obtain the current user’s cross-site scripting token. In short, use
a different session factory implementation (preferably one which keeps session data on the server) for
anything but the most basic of applications where ”session security doesn’t matter”, and you are sure
your application has no cross-site scripting vulnerabilities.

Using a Session Object

Once a session factory has been configured for your application, you can access session objects provided
by the session factory via the session attribute of any request object. For example:

1 from pyramid.response import Response


2

3 def myview(request):
4 session = request.session
5 if 'abc' in session:
6 session['fred'] = 'yes'
7 session['abc'] = '123'
8 if 'fred' in session:
9 return Response('Fred was in the session')
10 else:
11 return Response('Fred was not in the session')

The first time this view is invoked produces Fred was not in the session. Subsequent invo-
cations produce Fred was in the session, assuming of course that the client side maintains the
session’s identity across multiple requests.

You can use a session much like a Python dictionary. It supports all dictionary methods, along with some
extra attributes and methods.

Extra attributes:

created An integer timestamp indicating the time that this session was created.

0.3. Narrative Documentation 493


The Pyramid Web Framework, Version 1.9.4

new A boolean. If new is True, this session is new. Otherwise, it has been constituted from data that was
already serialized.

Extra methods:

changed() Call this when you mutate a mutable value in the session namespace. See the gotchas below
for details on when and why you should call this.

invalidate() Call this when you want to invalidate the session (dump all data, and perhaps set a
clearing cookie).

The formal definition of the methods and attributes supported by the session object are in the pyramid.
interfaces.ISession documentation.

Some gotchas:

• Keys and values of session data must be pickleable. This means, typically, that they are instances
of basic types of objects, such as strings, lists, dictionaries, tuples, integers, etc. If you place an
object in a session data key or value that is not pickleable, an error will be raised when the session
is serialized.

• If you place a mutable value (for example, a list or a dictionary) in a session object, and you sub-
sequently mutate that value, you must call the changed() method of the session object. In this
case, the session has no way to know that it was modified. However, when you modify a session
object directly, such as setting a value (i.e., __setitem__), or removing a key (e.g., del or pop),
the session will automatically know that it needs to re-serialize its data, thus calling changed() is
unnecessary. There is no harm in calling changed() in either case, so when in doubt, call it after
you’ve changed sessioning data.

Using Alternate Session Factories

The following session factories exist at the time of this writing.

Session Fac- Back- Description


tory end
pyra- Py- Defines an encrypting, pickle-based cookie serializer, using PyNaCl to gen-
mid_nacl_sessionNaCl erate the symmetric encryption for the cookie state.
pyra- Redis Server-side session library for Pyramid, using Redis for storage.
mid_redis_sessions
pyra- Beaker Session factory for Pyramid backed by the Beaker sessioning system.
mid_beaker

494 Contents
The Pyramid Web Framework, Version 1.9.4

Creating Your Own Session Factory

If none of the default or otherwise available sessioning implementations for Pyramid suit you, you may
create your own session object by implementing a session factory. Your session factory should return a ses-
sion. The interfaces for both types are available in pyramid.interfaces.ISessionFactory and
pyramid.interfaces.ISession. You might use the cookie implementation in the pyramid.
session module as inspiration.

Flash Messages

”Flash messages” are simply a queue of message strings stored in the session. To use flash messaging,
you must enable a session factory as described in Using the Default Session Factory or Using Alternate
Session Factories.

Flash messaging has two main uses: to display a status message only once to the user after performing an
internal redirect, and to allow generic code to log messages for single-time display without having direct
access to an HTML template. The user interface consists of a number of methods of the session object.

Using the session.flash Method

To add a message to a flash message queue, use a session object’s flash() method:

request.session.flash('mymessage')

The flash() method appends a message to a flash queue, creating the queue if necessary.

flash() accepts three arguments:

flash(message, queue=”, allow_duplicate=True)

The message argument is required. It represents a message you wish to later display to a user. It is
usually a string but the message you provide is not modified in any way.

The queue argument allows you to choose a queue to which to append the message you provide. This
can be used to push different kinds of messages into flash storage for later display in different places on
a page. You can pass any name for your queue, but it must be a string. Each queue is independent, and
can be popped by pop_flash() or examined via peek_flash() separately. queue defaults to the
empty string. The empty string represents the default flash message queue.

0.3. Narrative Documentation 495


The Pyramid Web Framework, Version 1.9.4

request.session.flash(msg, 'myappsqueue')

The allow_duplicate argument defaults to True. If this is False, and you attempt to add a message
value which is already present in the queue, it will not be added.

Using the session.pop_flash Method

Once one or more messages have been added to a flash queue by the session.flash() API, the
session.pop_flash() API can be used to pop an entire queue and return it for use.

To pop a particular queue of messages from the flash object, use the session object’s pop_flash()
method. This returns a list of the messages that were added to the flash queue, and empties the queue.

pop_flash(queue=”)

>>> request.session.flash('info message')


>>> request.session.pop_flash()
['info message']

Calling session.pop_flash() again like above without a corresponding call to session.


flash() will return an empty list, because the queue has already been popped.

>>> request.session.flash('info message')


>>> request.session.pop_flash()
['info message']
>>> request.session.pop_flash()
[]

Using the session.peek_flash Method

Once one or more messages have been added to a flash queue by the session.flash() API,
the session.peek_flash() API can be used to ”peek” at that queue. Unlike session.
pop_flash(), the queue is not popped from flash storage.

peek_flash(queue=”)

496 Contents
The Pyramid Web Framework, Version 1.9.4

>>> request.session.flash('info message')


>>> request.session.peek_flash()
['info message']
>>> request.session.peek_flash()
['info message']
>>> request.session.pop_flash()
['info message']
>>> request.session.peek_flash()
[]

0.3.16 Using Events

An event is an object broadcast by the Pyramid framework at interesting points during the lifetime of an
application. You don’t need to use events in order to create most Pyramid applications, but they can be
useful when you want to perform slightly advanced operations. For example, subscribing to an event can
allow you to run some code as the result of every new request.

Events in Pyramid are always broadcast by the framework. However, they only become useful when you
register a subscriber. A subscriber is a function that accepts a single argument named event:

1 def mysubscriber(event):
2 print(event)

The above is a subscriber that simply prints the event to the console when it’s called.

The mere existence of a subscriber function, however, is not sufficient to arrange for it to be called. To
arrange for the subscriber to be called, you’ll need to use the pyramid.config.Configurator.
add_subscriber() method or you’ll need to use the pyramid.events.subscriber() deco-
rator to decorate a function found via a scan.

Configuring an Event Listener Imperatively

You can imperatively configure a subscriber function to be called for some event type via the
add_subscriber() method:

0.3. Narrative Documentation 497


The Pyramid Web Framework, Version 1.9.4

1 from pyramid.events import NewRequest


2

3 from subscribers import mysubscriber


4

5 # "config" below is assumed to be an instance of a


6 # pyramid.config.Configurator object
7

8 config.add_subscriber(mysubscriber, NewRequest)

The first argument to add_subscriber() is the subscriber function (or a dotted Python name which
refers to a subscriber callable); the second argument is the event type.
See also:
See also Configurator.

Configuring an Event Listener Using a Decorator

You can configure a subscriber function to be called for some event type via the pyramid.events.
subscriber() function.

1 from pyramid.events import NewRequest


2 from pyramid.events import subscriber
3

4 @subscriber(NewRequest)
5 def mysubscriber(event):
6 event.request.foo = 1

When the subscriber() decorator is used, a scan must be performed against the package containing
the decorated function for the decorator to have any effect.
Either of the above registration examples implies that every time the Pyramid framework emits an event
object that supplies an pyramid.events.NewRequest interface, the mysubscriber function will
be called with an event object.
As you can see, a subscription is made in terms of a class (such as pyramid.events.NewResponse).
The event object sent to a subscriber will always be an object that possesses an interface. For pyramid.
events.NewResponse, that interface is pyramid.interfaces.INewResponse. The interface
documentation provides information about available attributes and methods of the event objects.
The return value of a subscriber function is ignored. Subscribers to the same event type are not guaranteed
to be called in any particular order relative to each other.
All the concrete Pyramid event types are documented in the pyramid.events API documentation.

498 Contents
The Pyramid Web Framework, Version 1.9.4

An Example

If you create event listener functions in a subscribers.py file in your application like so:

1 def handle_new_request(event):
2 print('request', event.request)
3

4 def handle_new_response(event):
5 print('response', event.response)

You may configure these functions to be called at the appropriate times by adding the following code to
your application’s configuration startup:

1 # config is an instance of pyramid.config.Configurator


2

3 config.add_subscriber('myproject.subscribers.handle_new_request',
4 'pyramid.events.NewRequest')
5 config.add_subscriber('myproject.subscribers.handle_new_response',
6 'pyramid.events.NewResponse')

Either mechanism causes the functions in subscribers.py to be registered as event subscribers. Under
this configuration, when the application is run, each time a new request or response is detected, a message
will be printed to the console.

Each of our subscriber functions accepts an event object and prints an attribute of the event object. This
begs the question: how can we know which attributes a particular event has?

We know that pyramid.events.NewRequest event objects have a request attribute, which is a


request object, because the interface defined at pyramid.interfaces.INewRequest says it must.
Likewise, we know that pyramid.interfaces.NewResponse events have a response attribute,
which is a response object constructed by your application, because the interface defined at pyramid.
interfaces.INewResponse says it must (pyramid.events.NewResponse objects also have
a request).

Creating Your Own Events

In addition to using the events that the Pyramid framework creates, you can create your own events for use
in your application. This can be useful to decouple parts of your application.

0.3. Narrative Documentation 499


The Pyramid Web Framework, Version 1.9.4

For example, suppose your application has to do many things when a new document is created. Rather
than putting all this logic in the view that creates the document, you can create the document in your view
and then fire a custom event. Subscribers to the custom event can take other actions, such as indexing the
document, sending email, or sending a message to a remote system.

An event is simply an object. There are no required attributes or method for your custom events. In general,
your events should keep track of the information that subscribers will need. Here are some example custom
event classes:

1 class DocCreated(object):
2 def __init__(self, doc, request):
3 self.doc = doc
4 self.request = request
5

6 class UserEvent(object):
7 def __init__(self, user):
8 self.user = user
9

10 class UserLoggedIn(UserEvent):
11 pass

Some Pyramid applications choose to define custom events classes in an events module.

You can subscribe to custom events in the same way that you subscribe to Pyramid events—either impera-
tively or with a decorator. You can also use custom events with subscriber predicates. Here’s an example
of subscribing to a custom event with a decorator:

1 from pyramid.events import subscriber


2 from .events import DocCreated
3 from .index import index_doc
4

5 @subscriber(DocCreated)
6 def index_doc(event):
7 # index the document using our application's index_doc function
8 index_doc(event.doc, event.request)

The above example assumes that the application defines a DocCreated event class and an index_doc
function.

To fire your custom events use the pyramid.registry.Registry.notify() method, which is


most often accessed as request.registry.notify. For example:

500 Contents
The Pyramid Web Framework, Version 1.9.4

1 from .events import DocCreated


2

3 def new_doc_view(request):
4 doc = MyDoc()
5 event = DocCreated(doc, request)
6 request.registry.notify(event)
7 return {'document': doc}

This example view will notify all subscribers to the custom DocCreated event.

Note that when you fire an event, all subscribers are run synchronously so it’s generally not a good idea to
create event handlers that may take a long time to run. Although event handlers could be used as a central
place to spawn tasks on your own message queues.

0.3.17 Environment Variables and .ini File Settings

Pyramid behavior can be configured through a combination of operating system environment variables and
.ini configuration file application section settings. The meaning of the environment variables and the
configuration file settings overlap.

Where a configuration file setting exists with the same meaning as an environment variable, and both
are present at application startup time, the environment variable setting takes precedence.

The term ”configuration file setting name” refers to a key in the .ini configuration for your application.
The configuration file setting names documented in this chapter are reserved for Pyramid use. You should
not use them to indicate application-specific configuration settings.

Reloading Templates

When this value is true, templates are automatically reloaded whenever they are modified without restarting
the application, so you can see changes to templates take effect immediately during development. This flag
is meaningful to Chameleon and Mako templates, as well as most third-party template rendering extensions.

Environment Variable Name Config File Setting Name


PYRAMID_RELOAD_TEMPLATES
pyramid.reload_templates or
reload_templates

0.3. Narrative Documentation 501


The Pyramid Web Framework, Version 1.9.4

Reloading Assets

Don’t cache any asset file data when this value is true.

See also:

See also Overriding Assets.

Environment Variable Name Config File Setting Name


PYRAMID_RELOAD_ASSETS pyramid.reload_assets or reload_assets

For backwards compatibility purposes, aliases can be used for configuring asset reloading:
PYRAMID_RELOAD_RESOURCES (envvar) and pyramid.reload_resources (config file).

Debugging Authorization

Print view authorization failure and success information to stderr when this value is true.

See also:

See also Debugging View Authorization Failures.

Environment Variable Name Config File Setting Name


PYRAMID_DEBUG_AUTHORIZATION
pyramid.debug_authorization or
debug_authorization

Debugging Not Found Errors

Print view-related NotFound debug messages to stderr when this value is true.

See also:

See also NotFound Errors.

Environment Variable Name Config File Setting Name


PYRAMID_DEBUG_NOTFOUND pyramid.debug_notfound or debug_notfound

502 Contents
The Pyramid Web Framework, Version 1.9.4

Debugging Route Matching

Print debugging messages related to url dispatch route matching when this value is true.

See also:

See also Debugging Route Matching.

Environment Variable Name Config File Setting Name


PYRAMID_DEBUG_ROUTEMATCH pyramid.debug_routematch or
debug_routematch

Preventing HTTP Caching

Prevent the http_cache view configuration argument from having any effect globally in this pro-
cess when this value is true. No HTTP caching-related response headers will be set by the Pyramid
http_cache view configuration feature when this is true.

See also:

See also Influencing HTTP Caching.

Environment Variable Name Config File Setting Name


PYRAMID_PREVENT_HTTP_CACHEpyramid.prevent_http_cache or
prevent_http_cache

Preventing Cache Busting

Prevent the cachebust static view configuration argument from having any effect globally in this process
when this value is true. No cache buster will be configured or used when this is true.

New in version 1.6.

See also:

See also Cache Busting.

Environment Variable Name Config File Setting Name


PYRAMID_PREVENT_CACHEBUST pyramid.prevent_cachebust or
prevent_cachebust

0.3. Narrative Documentation 503


The Pyramid Web Framework, Version 1.9.4

Debugging All

Turns on all debug* settings.

Environment Variable Name Config File Setting Name


PYRAMID_DEBUG_ALL pyramid.debug_all or debug_all

Reloading All

Turns on all reload* settings.

Environment Variable Name Config File Setting Name


PYRAMID_RELOAD_ALL pyramid.reload_all or reload_all

Default Locale Name

The value supplied here is used as the default locale name when a locale negotiator is not registered.
See also:
See also Localization-Related Deployment Settings.

Environment Variable Name Config File Setting Name


PYRAMID_DEFAULT_LOCALE_NAME
pyramid.default_locale_name or
default_locale_name

Including Packages

pyramid.includes instructs your application to include other packages. Using the setting is equiva-
lent to using the pyramid.config.Configurator.include() method.

Config File Setting Name


pyramid.includes

The value assigned to pyramid.includes should be a sequence. The sequence can take several dif-
ferent forms.
1) It can be a string.
If it is a string, the package names can be separated by spaces:

504 Contents
The Pyramid Web Framework, Version 1.9.4

package1 package2 package3

The package names can also be separated by carriage returns:

package1
package2
package3

2) It can be a Python list, where the values are strings:

['package1', 'package2', 'package3']

Each value in the sequence should be a dotted Python name.

pyramid.includes vs. pyramid.config.Configurator.include()

Two methods exist for including packages: pyramid.includes and pyramid.config.


Configurator.include(). This section explains their equivalence.

Using PasteDeploy

Using the following pyramid.includes setting in the PasteDeploy .ini file in your application:

[app:main]
pyramid.includes = pyramid_debugtoolbar
pyramid_tm

Is equivalent to using the following statements in your configuration code:

1 from pyramid.config import Configurator


2

3 def main(global_config, **settings):


4 config = Configurator(settings=settings)
5 # ...
6 config.include('pyramid_debugtoolbar')
7 config.include('pyramid_tm')
8 # ...

It is fine to use both or either form.

0.3. Narrative Documentation 505


The Pyramid Web Framework, Version 1.9.4

Plain Python

Using the following pyramid.includes setting in your plain-Python Pyramid application:

1 from pyramid.config import Configurator


2

3 if __name__ == '__main__':
4 settings = {'pyramid.includes':'pyramid_debugtoolbar pyramid_tm
,→'}

5 config = Configurator(settings=settings)

Is equivalent to using the following statements in your configuration code:

1 from pyramid.config import Configurator


2

3 if __name__ == '__main__':
4 settings = {}
5 config = Configurator(settings=settings)
6 config.include('pyramid_debugtoolbar')
7 config.include('pyramid_tm')

It is fine to use both or either form.

Explicit Tween Configuration

This value allows you to perform explicit tween ordering in your configuration. Tweens are bits of code
used by add-on authors to extend Pyramid. They form a chain, and require ordering.

Ideally you won’t need to use the pyramid.tweens setting at all. Tweens are generally ordered and
included ”implicitly” when an add-on package which registers a tween is ”included”. Packages are included
when you name a pyramid.includes setting in your configuration or when you call pyramid.
config.Configurator.include().

Authors of included add-ons provide ”implicit” tween configuration ordering hints to Pyramid when their
packages are included. However, the implicit tween ordering is only best-effort. Pyramid will attempt to
provide an implicit order of tweens as best it can using hints provided by add-on authors, but because it’s
only best-effort, if very precise tween ordering is required, the only surefire way to get it is to use an explicit
tween order. You may be required to inspect your tween ordering (see Displaying ”Tweens”) and add a
pyramid.tweens configuration value at the behest of an add-on author.

506 Contents
The Pyramid Web Framework, Version 1.9.4

Config File Setting Name


pyramid.tweens

The value assigned to pyramid.tweens should be a sequence. The sequence can take several different
forms.

1) It can be a string.

If it is a string, the tween names can be separated by spaces:

pkg.tween_factory1 pkg.tween_factory2 pkg.tween_factory3

The tween names can also be separated by carriage returns:

pkg.tween_factory1
pkg.tween_factory2
pkg.tween_factory3

2) It can be a Python list, where the values are strings:

['pkg.tween_factory1', 'pkg.tween_factory2', 'pkg.tween_factory3


,→']

Each value in the sequence should be a dotted Python name.

PasteDeploy Configuration vs. Plain-Python Configuration

Using the following pyramid.tweens setting in the PasteDeploy .ini file in your application:

[app:main]
pyramid.tweens = pyramid_debugtoolbar.toolbar.tween_factory
pyramid.tweens.excview_tween_factory
pyramid_tm.tm_tween_factory

Is equivalent to using the following statements in your configuration code:

0.3. Narrative Documentation 507


The Pyramid Web Framework, Version 1.9.4

1 from pyramid.config import Configurator


2

3 def main(global_config, **settings):


4 settings['pyramid.tweens'] = [
5 'pyramid_debugtoolbar.toolbar.tween_factory',
6 'pyramid.tweebs.excview_tween_factory',
7 'pyramid_tm.tm_tween_factory',
8 ]
9 config = Configurator(settings=settings)

It is fine to use both or either form.

Examples

Let’s presume your configuration file is named MyProject.ini, and there is a section representing
your application named [app:main] within the file that represents your Pyramid application. The
configuration file settings documented in the above ”Config File Setting Name” column would go in the
[app:main] section. Here’s an example of such a section:

1 [app:main]
2 use = egg:MyProject
3 pyramid.reload_templates = true
4 pyramid.debug_authorization = true

You can also use environment variables to accomplish the same purpose for settings documented as such.
For example, you might start your Pyramid application using the following command line:

$ PYRAMID_DEBUG_AUTHORIZATION=1 PYRAMID_RELOAD_TEMPLATES=1 \
$VENV/bin/pserve MyProject.ini

If you started your application this way, your Pyramid application would behave in the same manner as if
you had placed the respective settings in the [app:main] section of your application’s .ini file.

If you want to turn all debug settings (every setting that starts with pyramid.debug_) on in one
fell swoop, you can use PYRAMID_DEBUG_ALL=1 as an environment variable setting or you may use
pyramid.debug_all=true in the config file. Note that this does not affect settings that do not start
with pyramid.debug_* such as pyramid.reload_templates.

508 Contents
The Pyramid Web Framework, Version 1.9.4

If you want to turn all pyramid.reload settings (every setting that starts with pyramid.reload_)
on in one fell swoop, you can use PYRAMID_RELOAD_ALL=1 as an environment variable setting or you
may use pyramid.reload_all=true in the config file. Note that this does not affect settings that do
not start with pyramid.reload_* such as pyramid.debug_notfound.

Specifying configuration settings via environment variables is generally most useful during devel-
opment, where you may wish to augment or override the more permanent settings in the configuration
file. This is useful because many of the reload and debug settings may have performance or security (i.e.,
disclosure) implications that make them undesirable in a production environment.

Understanding the Distinction Between reload_templates and reload_assets

The difference between pyramid.reload_assets and pyramid.reload_templates is a bit


subtle. Templates are themselves also treated by Pyramid as asset files (along with other static files), so
the distinction can be confusing. It’s helpful to read Overriding Assets for some context about assets in
general.

When pyramid.reload_templates is true, Pyramid takes advantage of the underlying templat-


ing system’s ability to check for file modifications to an individual template file. When pyramid.
reload_templates is true, but pyramid.reload_assets is not true, the template filename re-
turned by the pkg_resources package (used under the hood by asset resolution) is cached by Pyramid
on the first request. Subsequent requests for the same template file will return a cached template filename.
The underlying templating system checks for modifications to this particular file for every request. Setting
pyramid.reload_templates to True doesn’t affect performance dramatically (although it should
still not be used in production because it has some effect).

However, when pyramid.reload_assets is true, Pyramid will not cache the template filename,
meaning you can see the effect of changing the content of an overridden asset directory for templates
without restarting the server after every change. Subsequent requests for the same template file may re-
turn different filenames based on the current state of overridden asset directories. Setting pyramid.
reload_assets to True affects performance dramatically, slowing things down by an order of mag-
nitude for each template rendering. However, it’s convenient to enable when moving files around in over-
ridden asset directories. pyramid.reload_assets makes the system very slow when templates are
in use. Never set pyramid.reload_assets to True on a production system.

0.3. Narrative Documentation 509


The Pyramid Web Framework, Version 1.9.4

Adding a Custom Setting

From time to time, you may need to add a custom setting to your application. Here’s how:

• If you’re using an .ini file, change the .ini file, adding the setting to the [app:foo] section
representing your Pyramid application. For example:

[app:main]
# .. other settings
debug_frobnosticator = True

• In the main() function that represents the place that your Pyramid WSGI application is created,
anticipate that you’ll be getting this key/value pair as a setting and do any type conversion necessary.

If you’ve done any type conversion of your custom value, reset the converted values into the
settings dictionary before you pass the dictionary as settings to the Configurator. For ex-
ample:

def main(global_config, **settings):


# ...
from pyramid.settings import asbool
debug_frobnosticator = asbool(settings.get(
'debug_frobnosticator', 'false'))
settings['debug_frobnosticator'] = debug_frobnosticator
config = Configurator(settings=settings)

It’s especially important that you mutate the settings dictionary with the converted version
of the variable before passing it to the Configurator: the configurator makes a copy of settings,
it doesn’t use the one you pass directly.

• When creating an includeme function that will be later added to your application’s configuration
you may access the settings dictionary through the instance of the Configurator that is passed
into the function as its only argument. For Example:

def includeme(config):
settings = config.registry.settings
debug_frobnosticator = settings['debug_frobnosticator']

510 Contents
The Pyramid Web Framework, Version 1.9.4

• In the runtime code from where you need to access the new settings value, find the value in the
registry.settings dictionary and use it. In view code (or any other code that has access to
the request), the easiest way to do this is via request.registry.settings. For example:

settings = request.registry.settings
debug_frobnosticator = settings['debug_frobnosticator']

If you wish to use the value in code that does not have access to the request and you wish to use the
value, you’ll need to use the pyramid.threadlocal.get_current_registry() API to
obtain the current registry, then ask for its settings attribute. For example:

registry = pyramid.threadlocal.get_current_registry()
settings = registry.settings
debug_frobnosticator = settings['debug_frobnosticator']

0.3.18 Logging

Pyramid allows you to make use of the Python standard library logging module. This chapter describes
how to configure logging and how to send log messages to loggers that you’ve configured.

This chapter assumes you’ve used a cookiecutter to create a project which contains
development.ini and production.ini files which help configure logging. All of the Pyra-
mid cookiecutters provided by the Pylons Project do this. If you’re not using a cookiecutter, or if you’ve
used a third-party cookiecutter which does not create these files, the configuration information in this
chapter may not be applicable.

Logging Configuration

A Pyramid project created from a cookiecutter is configured to allow you to send messages to Python
standard library logging package loggers from within your application. In particular, the
PasteDeploy development.ini and production.ini files created when you use a cookiecutter
include a basic configuration for the Python logging package.

PasteDeploy .ini files use the Python standard library ConfigParser format. This is the same
format used as the Python logging module’s Configuration file format. The application-related and logging-
related sections in the configuration file can coexist peacefully, and the logging-related sections in the file
are used from when you run pserve.

0.3. Narrative Documentation 511


The Pyramid Web Framework, Version 1.9.4

The pserve command calls the pyramid.paster.setup_logging() function, a thin wrap-


per around the logging.config.fileConfig() using the specified .ini file, if it contains a
[loggers] section (all of the cookiecutter-generated .ini files do). setup_logging reads the
logging configuration from the ini file upon which pserve was invoked.

Default logging configuration is provided in both the default development.ini and the
production.ini files. If you use pyramid-cookiecutter-starter to generate a Pyra-
mid project with the name of the package as hello_world, then the logging configuration in the
development.ini file is as follows:

29 ###
30 # logging configuration
31 # https://docs.pylonsproject.org/projects/pyramid/en/latest/narr/
,→logging.html

32 ###
33

34 [loggers]
35 keys = root, myproject
36

37 [handlers]
38 keys = console
39

40 [formatters]
41 keys = generic
42

43 [logger_root]
44 level = INFO
45 handlers = console
46

47 [logger_myproject]
48 level = DEBUG
49 handlers =
50 qualname = myproject
51

52 [handler_console]
53 class = StreamHandler
54 args = (sys.stderr,)
55 level = NOTSET
56 formatter = generic
57

58 [formatter_generic]
59 format = %(asctime)s %(levelname)-5.5s [%(name)s:%(lineno)s][
,→%(threadName)s] %(message)s

512 Contents
The Pyramid Web Framework, Version 1.9.4

The production.ini file uses the WARN level in its logger configuration instead of DEBUG, but it is
otherwise identical.

In this logging configuration:

• a logger named root is created that logs messages at a level above or equal to the INFO level to
stderr, with the following format:

2007-08-17 15:04:08,704 INFO [packagename] Loading resource,␣


,→id: 86

• a logger named myproject is configured that logs messages sent at a level above or equal to DEBUG
to stderr in the same format as the root logger.

The root logger will be used by all applications in the Pyramid process that ask for a logger (via
logging.getLogger) that has a name which begins with anything except your project’s package name
(e.g., myproject). The logger with the same name as your package name is reserved for your own usage
in your Pyramid application. Its existence means that you can log to a known logging location from any
Pyramid application generated via a cookiecutter.

Pyramid and many other libraries (such as Beaker, SQLAlchemy, Paste) log a number of messages to the
root logger for debugging purposes. Switching the root logger level to DEBUG reveals them:

[logger_root]
#level = INFO
level = DEBUG
handlers = console

Some cookiecutters configure additional loggers for additional subsystems they use (such as
SQLALchemy). Take a look at the production.ini and development.ini files rendered when
you create a project from a cookiecutter.

Sending Logging Messages

Python’s special __name__ variable refers to the current module’s fully qualified name. From any
module in a package named myproject, the __name__ builtin variable will always be something
like myproject, or myproject.subpackage or myproject.package.subpackage if your
project is named myproject. Sending a message to this logger will send it to the myproject logger.

To log messages to the package-specific logger configured in your .ini file, simply create a logger object
using the __name__ builtin and call methods on it.

0.3. Narrative Documentation 513


The Pyramid Web Framework, Version 1.9.4

1 import logging
2 log = logging.getLogger(__name__)
3

4 def myview(request):
5 content_type = 'text/plain'
6 content = 'Hello World!'
7 log.debug('Returning: %s (content-type: %s)', content, content_
,→type)

8 request.response.content_type = content_type
9 return request.response

This will result in the following printed to the console, on stderr:

16:20:20,440 DEBUG [myproject.views] Returning: Hello World!


(content-type: text/plain)

Filtering log messages

Often there’s too much log output to sift through, such as when switching the root logger’s level to DEBUG.

For example, you’re diagnosing database connection issues in your application and only want to see
SQLAlchemy’s DEBUG messages in relation to database connection pooling. You can leave the root log-
ger’s level at the less verbose INFO level and set that particular SQLAlchemy logger to DEBUG on its own,
apart from the root logger:

[logger_sqlalchemy.pool]
level = DEBUG
handlers =
qualname = sqlalchemy.pool

then add it to the list of loggers:

[loggers]
keys = root, myproject, sqlalchemy.pool

No handlers need to be configured for this logger as by default non-root loggers will propagate their log
records up to their parent logger’s handlers. The root logger is the top level parent of all loggers.

This technique is used in the default development.ini. The root logger’s level is set to INFO, whereas
the application’s log level is set to DEBUG:

514 Contents
The Pyramid Web Framework, Version 1.9.4

# Begin logging configuration

[loggers]
keys = root, myproject

[logger_myproject]
level = DEBUG
handlers =
qualname = myproject

All of the child loggers of the myproject logger will inherit the DEBUG level unless they’re explicitly
set differently. Meaning the myproject.views, myproject.models, and all your app’s modules’
loggers by default have an effective level of DEBUG too.
For more advanced filtering, the logging module provides a logging.Filter object; however it cannot
be used directly from the configuration file.

Advanced Configuration

To capture log output to a separate file, use logging.FileHandler (or logging.handlers.


RotatingFileHandler):

[handler_filelog]
class = FileHandler
args = ('%(here)s/myproject.log','a')
level = INFO
formatter = generic

Before it’s recognized, it needs to be added to the list of handlers:

[handlers]
keys = console, myproject, filelog

and finally utilized by a logger.

[logger_root]
level = INFO
handlers = console, filelog

These final three lines of configuration direct all of the root logger’s output to the myproject.log as
well as the console.

0.3. Narrative Documentation 515


The Pyramid Web Framework, Version 1.9.4

Logging Exceptions

To log or email exceptions generated by your Pyramid application, use the pyramid_exclog package. De-
tails about its configuration are in its documentation.

Request Logging with Paste’s TransLogger

The WSGI design is modular. Waitress logs error conditions, debugging output, etc., but not web traffic.
For web traffic logging, Paste provides the TransLogger middleware. TransLogger produces logs in the
Apache Combined Log Format. But TransLogger does not write to files; the Python logging system must
be configured to do this. The Python logging.FileHandler logging handler can be used alongside
TransLogger to create an access.log file similar to Apache’s.

Like any standard middleware with a Paste entry point, TransLogger can be configured to wrap
your application using .ini file syntax. First rename your Pyramid .ini file’s [app:main]
section to [app:mypyramidapp], then add a [filter:translogger] section, then use a
[pipeline:main] section file to form a WSGI pipeline with both the translogger and your application
in it. For instance, change from this:

[app:main]
use = egg:myproject

To this:

[app:mypyramidapp]
use = egg:myproject

[filter:translogger]
use = egg:Paste#translogger
setup_console_handler = False

[pipeline:main]
pipeline = translogger
mypyramidapp

Using PasteDeploy this way to form and serve a pipeline is equivalent to wrapping your app in a TransLog-
ger instance via the bottom of the main function of your project’s __init__ file:

516 Contents
The Pyramid Web Framework, Version 1.9.4

...
app = config.make_wsgi_app()
from paste.translogger import TransLogger
app = TransLogger(app, setup_console_handler=False)
return app

TransLogger will automatically setup a logging handler to the console when called with no arguments,
so it ”just works” in environments that don’t configure logging. Since our logging handlers are configured,
we disable the automation via setup_console_handler = False.

With the filter in place, TransLogger’s logger (named the wsgi logger) will propagate its log messages to
the parent logger (the root logger), sending its output to the console when we request a page:

00:50:53,694 INFO [myproject.views] Returning: Hello World!


(content-type: text/plain)
00:50:53,695 INFO [wsgi] 192.168.1.111 - - [11/Aug/2011:20:09:33 -
,→0700] "GET /hello

HTTP/1.1" 404 - "-"


"Mozilla/5.0 (Macintosh; U; Intel Mac OS X; en-US; rv:1.8.1.6)␣
,→Gecko/20070725

Firefox/2.0.0.6"

To direct TransLogger to an access.log FileHandler, we need the following to add a FileHandler


(named accesslog) to the list of handlers, and ensure that the wsgi logger is configured and uses
this handler accordingly:

# Begin logging configuration

[loggers]
keys = root, myproject, wsgi

[handlers]
keys = console, accesslog

[logger_wsgi]
level = INFO
handlers = accesslog
qualname = wsgi
(continues on next page)

0.3. Narrative Documentation 517


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


propagate = 0

[handler_accesslog]
class = FileHandler
args = ('%(here)s/access.log','a')
level = INFO
formatter = generic

As mentioned above, non-root loggers by default propagate their log records to the root logger’s handlers
(currently the console handler). Setting propagate to 0 (False) here disables this; so the wsgi logger
directs its records only to the accesslog handler.

Finally, there’s no need to use the generic formatter with TransLogger as TransLogger itself provides
all the information we need. We’ll use a formatter that passes through the log messages as is. Add a new
formatter called accesslog by including the following in your configuration file:

[formatters]
keys = generic, accesslog

[formatter_accesslog]
format = %(message)s

Finally alter the existing configuration to wire this new accesslog formatter into the FileHandler:

[handler_accesslog]
class = FileHandler
args = ('%(here)s/access.log','a')
level = INFO
formatter = accesslog

0.3.19 PasteDeploy Configuration Files

Packages generated via a cookiecutter make use of a system created by Ian Bicking named PasteDeploy.
PasteDeploy defines a way to declare WSGI application configuration in an .ini file.

Pyramid uses this configuration file format as input to its WSGI server runner pserve, as well as other
commands such as pviews, pshell, proutes, and ptweens.

518 Contents
The Pyramid Web Framework, Version 1.9.4

PasteDeploy is not a particularly integral part of Pyramid. It’s possible to create a Pyramid application
which does not use PasteDeploy at all. We show a Pyramid application that doesn’t use PasteDeploy in
Creating Your First Pyramid Application. However, all Pyramid cookiecutters render PasteDeploy con-
figuration files, to provide new developers with a standardized way of setting deployment values, and to
provide new users with a standardized way of starting, stopping, and debugging an application.

This chapter is not a replacement for documentation about PasteDeploy; it only contextualizes the use
of PasteDeploy within Pyramid. For detailed documentation, see https://pastedeploy.readthedocs.io/en/
latest/.

PasteDeploy

plaster is the system that Pyramid uses to load settings from configuration files. The most common for-
mat for these files is an .ini format structured in a way defined by PasteDeploy. The format supports
mechanisms to define WSGI app deployment settings, WSGI server settings and logging. This allows the
pserve command to work, allowing you to stop and start a Pyramid application easily.

Entry Points and PasteDeploy .ini Files

In the Creating a Pyramid Project chapter, we breezed over the meaning of a configuration line in the
deployment.ini file. This was the use = egg:myproject line in the [app:main] section.
We breezed over it because it’s pretty confusing and ”too much information” for an introduction to the
system. We’ll try to give it a bit of attention here. Let’s see the config file again:

1 ###
2 # app configuration
3 # https://docs.pylonsproject.org/projects/pyramid/en/latest/narr/
,→environment.html

4 ###
5

6 [app:main]
7 use = egg:myproject
8

9 pyramid.reload_templates = true
10 pyramid.debug_authorization = false
11 pyramid.debug_notfound = false
12 pyramid.debug_routematch = false
13 pyramid.default_locale_name = en
14 pyramid.includes =
(continues on next page)

0.3. Narrative Documentation 519


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


15 pyramid_debugtoolbar
16

17 # By default, the toolbar only appears for clients from IP addresses


18 # '127.0.0.1' and '::1'.
19 # debugtoolbar.hosts = 127.0.0.1 ::1
20

21 ###
22 # wsgi server configuration
23 ###
24

25 [server:main]
26 use = egg:waitress#main
27 listen = localhost:6543
28

29 ###
30 # logging configuration
31 # https://docs.pylonsproject.org/projects/pyramid/en/latest/narr/
,→logging.html

32 ###
33

34 [loggers]
35 keys = root, myproject
36

37 [handlers]
38 keys = console
39

40 [formatters]
41 keys = generic
42

43 [logger_root]
44 level = INFO
45 handlers = console
46

47 [logger_myproject]
48 level = DEBUG
49 handlers =
50 qualname = myproject
51

52 [handler_console]
53 class = StreamHandler
54 args = (sys.stderr,)
(continues on next page)

520 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


55 level = NOTSET
56 formatter = generic
57

58 [formatter_generic]
59 format = %(asctime)s %(levelname)-5.5s [%(name)s:%(lineno)s][
,→%(threadName)s] %(message)s

The line in [app:main] above that says use = egg:myproject is actually shorthand for a longer
spelling: use = egg:myproject#main. The #main part is omitted for brevity, as #main is a
default defined by PasteDeploy. egg:myproject#main is a string which has meaning to PasteDeploy.
It points at a setuptools entry point named main defined in the myproject project.

Take a look at the generated setup.py file for this project.

1 import os
2

3 from setuptools import setup, find_packages


4

5 here = os.path.abspath(os.path.dirname(__file__))
6 with open(os.path.join(here, 'README.txt')) as f:
7 README = f.read()
8 with open(os.path.join(here, 'CHANGES.txt')) as f:
9 CHANGES = f.read()
10

11 requires = [
12 'plaster_pastedeploy',
13 'pyramid',
14 'pyramid_jinja2',
15 'pyramid_debugtoolbar',
16 'waitress',
17 ]
18

19 tests_require = [
20 'WebTest >= 1.3.1', # py3 compat
21 'pytest',
22 'pytest-cov',
23 ]
24

25 setup(
26 name='myproject',
27 version='0.0',
(continues on next page)

0.3. Narrative Documentation 521


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


28 description='MyProject',
29 long_description=README + '\n\n' + CHANGES,
30 classifiers=[
31 'Programming Language :: Python',
32 'Framework :: Pyramid',
33 'Topic :: Internet :: WWW/HTTP',
34 'Topic :: Internet :: WWW/HTTP :: WSGI :: Application',
35 ],
36 author='',
37 author_email='',
38 url='',
39 keywords='web pyramid pylons',
40 packages=find_packages(),
41 include_package_data=True,
42 zip_safe=False,
43 extras_require={
44 'testing': tests_require,
45 },
46 install_requires=requires,
47 entry_points={
48 'paste.app_factory': [
49 'main = myproject:main',
50 ],
51 },
52 )

Note that entry_points is assigned a string which looks a lot like an .ini file. This string represen-
tation of an .ini file has a section named [paste.app_factory]. Within this section, there is a key
named main (the entry point name) which has a value myproject:main. The key main is what our
egg:myproject#main value of the use section in our config file is pointing at, although it is actually
shortened to egg:myproject there. The value represents a dotted Python name path, which refers to a
callable in our myproject package’s __init__.py module.
The egg: prefix in egg:myproject indicates that this is an entry point URI specifier, where the
”scheme” is ”egg”. An ”egg” is created when you run setup.py install or setup.py develop
within your project.
In English, this entry point can thus be referred to as a ”PasteDeploy application factory in the myproject
project which has the entry point named main where the entry point refers to a main function in
the mypackage module”. Indeed, if you open up the __init__.py module generated within any
cookiecutter-generated package, you’ll see a main function. This is the function called by PasteDeploy
when the pserve command is invoked against our application. It accepts a global configuration object
and returns an instance of our application.

522 Contents
The Pyramid Web Framework, Version 1.9.4

[DEFAULT] Section of a PasteDeploy .ini File

You can add a [DEFAULT] section to your PasteDeploy .ini file. Such a section should consist of
global parameters that are shared by all the applications, servers, and middleware defined within the con-
figuration file. The values in a [DEFAULT] section will be passed to your application’s main function
as global_config (see the reference to the main function in __init__.py).

Alternative Configuration File Formats

It is possible to use different file formats with Pyramid if you do not like PasteDeploy. Under the hood all
command-line scripts such as pserve and pshell pass the config_uri (e.g. development.ini
or production.ini) to the plaster library which performs a lookup for an appropriate parser. For
.ini files it uses PasteDeploy but you can register your own configuration formats that plaster will find
instead.

0.3.20 Command-Line Pyramid

Your Pyramid application can be controlled and inspected using a variety of command-line utilities. These
utilities are documented in this chapter.

Displaying Matching Views for a Given URL

See also:

See also the output of pviews –help.

For a big application with several views, it can be hard to keep the view configuration details in your head,
even if you defined all the views yourself. You can use the pviews command in a terminal window
to print a summary of matching routes and views for a given URL in your application. The pviews
command accepts two arguments. The first argument to pviews is the path to your application’s .ini
file and section name inside the .ini file which points to your application. This should be of the format
config_file#section_name. The second argument is the URL to test for matching views. The
section_name may be omitted; if it is, it’s considered to be main.

Here is an example for a simple view configuration using traversal:

0.3. Narrative Documentation 523


The Pyramid Web Framework, Version 1.9.4

1 $ $VENV/bin/pviews development.ini#tutorial /FrontPage


2

3 URL = /FrontPage
4

5 context: <tutorial.models.Page object at 0xa12536c>


6 view name:
7

8 View:
9 -----
10 tutorial.views.view_page
11 required permission = view

The output always has the requested URL at the top and below that all the views that matched with their
view configuration details. In this example only one view matches, so there is just a single View section. For
each matching view, the full code path to the associated view callable is shown, along with any permissions
and predicates that are part of that view configuration.

A more complex configuration might generate something like this:

1 $ $VENV/bin/pviews development.ini#shootout /about


2

3 URL = /about
4

5 context: <shootout.models.RootFactory object at 0xa56668c>


6 view name: about
7

8 Route:
9 ------
10 route name: about
11 route pattern: /about
12 route path: /about
13 subpath:
14 route predicates (request method = GET)
15

16 View:
17 -----
18 shootout.views.about_view
19 required permission = view
20 view predicates (request_param testing, header X/header)
21

22 Route:
(continues on next page)

524 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


23 ------
24 route name: about_post
25 route pattern: /about
26 route path: /about
27 subpath:
28 route predicates (request method = POST)
29

30 View:
31 -----
32 shootout.views.about_view_post
33 required permission = view
34 view predicates (request_param test)
35

36 View:
37 -----
38 shootout.views.about_view_post2
39 required permission = view
40 view predicates (request_param test2)

In this case, we are dealing with a URL dispatch application. This specific URL has two matching routes.
The matching route information is displayed first, followed by any views that are associated with that route.
As you can see from the second matching route output, a route can be associated with more than one view.

For a URL that doesn’t match any views, pviews will simply print out a Not found message.

The Interactive Shell

See also:

See also the output of pshell –help.

Once you’ve installed your program for development using pip install -e ., you can use an inter-
active Python shell to execute expressions in a Python environment exactly like the one that will be used
when your application runs ”for real”. To do so, use the pshell command line utility.

The argument to pshell follows the format config_file#section_name where config_file


is the path to your application’s .ini file and section_name is the app section name inside the
.ini file which points to your application. For example, your application .ini file might have an
[app:main] section that looks like so:

0.3. Narrative Documentation 525


The Pyramid Web Framework, Version 1.9.4

1 [app:main]
2 use = egg:MyProject
3 pyramid.reload_templates = true
4 pyramid.debug_authorization = false
5 pyramid.debug_notfound = false
6 pyramid.debug_templates = true
7 pyramid.default_locale_name = en

If so, you can use the following command to invoke a debug shell using the name main as a section name:

$ $VENV/bin/pshell starter/development.ini#main
Python 2.6.5 (r265:79063, Apr 29 2010, 00:31:32)
[GCC 4.4.3] on linux2
Type "help" for more information.

Environment:
app The WSGI application.
registry Active Pyramid registry.
request Active request object.
root Root of the default resource tree.
root_factory Default root factory used to create `root`.

>>> root
<myproject.resources.MyResource object at 0x445270>
>>> registry
<Registry myproject>
>>> registry.settings['pyramid.debug_notfound']
False
>>> from myproject.views import my_view
>>> from pyramid.request import Request
>>> r = Request.blank('/')
>>> my_view(r)
{'project': 'myproject'}

The WSGI application that is loaded will be available in the shell as the app global. Also, if the application
that is loaded is the Pyramid app with no surrounding middleware, the root object returned by the default
root factory, registry, and request will be available.

You can also simply rely on the main default section name by omitting any hash after the filename:

526 Contents
The Pyramid Web Framework, Version 1.9.4

$ $VENV/bin/pshell starter/development.ini

Press Ctrl-D to exit the interactive shell (or Ctrl-Z on Windows).

Extending the Shell

It is convenient when using the interactive shell often to have some variables significant to your application
already loaded as globals when you start the pshell. To facilitate this, pshell will look for a special
[pshell] section in your INI file and expose the subsequent key/value pairs to the shell. Each key is a
variable name that will be global within the pshell session; each value is a dotted Python name. If specified,
the special key setup should be a dotted Python name pointing to a callable that accepts the dictionary
of globals that will be loaded into the shell. This allows for some custom initializing code to be executed
each time the pshell is run. The setup callable can also be specified from the commandline using the
--setup option which will override the key in the INI file.

For example, you want to expose your model to the shell along with the database session so that you can
mutate the model on an actual database. Here, we’ll assume your model is stored in the myapp.models
package.

1 [pshell]
2 setup = myapp.lib.pshell.setup
3 m = myapp.models
4 session = myapp.models.DBSession
5 t = transaction

By defining the setup callable, we will create the module myapp.lib.pshell containing a callable
named setup that will receive the global environment before it is exposed to the shell. Here we mutate
the environment’s request as well as add a new value containing a WebTest version of the application to
which we can easily submit requests.

1 # myapp/lib/pshell.py
2 from webtest import TestApp
3

4 def setup(env):
5 env['request'].host = 'www.example.com'
6 env['request'].scheme = 'https'
7 env['testapp'] = TestApp(env['app'])

0.3. Narrative Documentation 527


The Pyramid Web Framework, Version 1.9.4

When this INI file is loaded, the extra variables m, session and t will be available for use immediately.
Since a setup callable was also specified, it is executed and a new variable testapp is exposed, and
the request is configured to generate urls from the host http://www.example.com. For example:

$ $VENV/bin/pshell starter/development.ini
Python 2.6.5 (r265:79063, Apr 29 2010, 00:31:32)
[GCC 4.4.3] on linux2
Type "help" for more information.

Environment:
app The WSGI application.
registry Active Pyramid registry.
request Active request object.
root Root of the default resource tree.
root_factory Default root factory used to create `root`.
testapp <webtest.TestApp object at ...>

Custom Variables:
m myapp.models
session myapp.models.DBSession
t transaction

>>> testapp.get('/')
<200 OK text/html body='<!DOCTYPE...l>\n'/3337>
>>> request.route_url('home')
'https://www.example.com/'

Alternative Shells

The pshell command can be easily extended with alternate REPLs if the default python REPL is
not satisfactory. Assuming you have a binding installed such as pyramid_ipython it will normally
be auto-selected and used. You may also specifically invoke your choice with the -p choice or
--python-shell choice option.

$ $VENV/bin/pshell -p ipython development.ini#MyProject

You may use the --list-shells option to see the available shells.

528 Contents
The Pyramid Web Framework, Version 1.9.4

$ $VENV/bin/pshell --list-shells
Available shells:
bpython
ipython
python

If you want to use a shell that isn’t supported out of the box, you can introduce a new shell by registering
an entry point in your setup.py:

setup(
entry_points={
'pyramid.pshell_runner': [
'myshell=my_app:ptpython_shell_factory',
],
},
)

And then your shell factory should return a function that accepts two arguments, env and help, which
would look like this:

from ptpython.repl import embed

def ptpython_shell_runner(env, help):


print(help)
return embed(locals=env)

Changed in version 1.6: User-defined shells may be registered using entry points. Prior to this the only
supported shells were ipython, bpython and python.

ipython and bpython have been moved into their respective packages pyramid_ipython and
pyramid_bpython.

Setting a Default Shell

You may use the default_shell option in your [pshell] ini section to specify a list of preferred
shells.

0.3. Narrative Documentation 529


The Pyramid Web Framework, Version 1.9.4

1 [pshell]
2 default_shell = ptpython ipython bpython

New in version 1.6.

Displaying All Application Routes

See also:

See also the output of proutes –help.

You can use the proutes command in a terminal window to print a summary of routes related to your
application. Much like the pshell command (see The Interactive Shell), the proutes command accepts
one argument with the format config_file#section_name. The config_file is the path to
your application’s .ini file, and section_name is the app section name inside the .ini file which
points to your application. By default, the section_name is main and can be omitted.

For example:

1 $ $VENV/bin/proutes development.ini
2 Name Pattern View ␣
,→ Method
3 ---- ------- ---- ␣
,→ ------
4 debugtoolbar /_debug_toolbar/*subpath <wsgiapp> ␣
,→ *
5 __static/ /static/*subpath dummy_
,→starter:static/ *
6 __static2/ /static2/*subpath /var/www/
,→static/ *
7 __pdt_images/ /pdt_images/*subpath pyramid_
,→debugtoolbar:static/img/ *
8 a / <unknown> ␣
,→ *
9 no_view_attached / <unknown> ␣
,→ *
10 route_and_view_attached / app1.
,→standard_views.route_and_view_attached *
11 method_conflicts /conflicts app1.
,→standard_conflicts <route mismatch>
(continues on next page)

530 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


12 multiview /multiview app1.
,→standard_views.multiview GET,PATCH
13 not_post /not_post app1.
,→standard_views.multview !POST,*

proutes generates a table with four columns: Name, Pattern, View, and Method. The items listed in the
Name column are route names, the items listed in the Pattern column are route patterns, the items listed
in the View column are representations of the view callable that will be invoked when a request matches
the associated route pattern, and the items listed in the Method column are the request methods that are
associated with the route name. The View column may show <unknown> if no associated view callable
could be found. The Method column, for the route name, may show either <route mismatch> if the
view callable does not accept any of the route’s request methods, or * if the view callable will accept any
of the route’s request methods. If no routes are configured within your application, nothing will be printed
to the console when proutes is executed.

It is convenient when using the proutes command often to configure which columns and the order you
would like to view them. To facilitate this, proutes will look for a special [proutes] section in your
.ini file and use those as defaults.

For example you may remove the request method and place the view first:

1 [proutes]
2 format = view
3 name
4 pattern

You can also separate the formats with commas or spaces:

1 [proutes]
2 format = view name pattern
3

4 [proutes]
5 format = view, name, pattern

If you want to temporarily configure the columns and order, there is the argument --format, which is a
comma separated list of columns you want to include. The current available formats are name, pattern,
view, and method.

0.3. Narrative Documentation 531


The Pyramid Web Framework, Version 1.9.4

Displaying ”Tweens”

See also:

See also the output of ptweens –help.

A tween is a bit of code that sits between the main Pyramid application request handler and the WSGI
application which calls it. A user can get a representation of both the implicit tween ordering (the ordering
specified by calls to pyramid.config.Configurator.add_tween()) and the explicit tween or-
dering (specified by the pyramid.tweens configuration setting) using the ptweens command. Tween
factories will show up represented by their standard Python dotted name in the ptweens output.

For example, here’s the ptweens command run against a system configured without any explicit tweens:

1 $ $VENV/bin/ptweens development.ini
2 "pyramid.tweens" config value NOT set (implicitly ordered tweens␣
,→used)

4 Implicit Tween Chain


5

6 Position Name ␣
,→Alias

7 -------- ---- ----


,→-

8 - - ␣
,→INGRESS

9 0 pyramid_debugtoolbar.toolbar.toolbar_tween_factory pdbt
10 1 pyramid.tweens.excview_tween_factory ␣
,→excview

11 - - MAIN

Here’s the ptweens command run against a system configured with explicit tweens defined in its
development.ini file:

1 $ ptweens development.ini
2 "pyramid.tweens" config value set (explicitly ordered tweens used)
3

4 Explicit Tween Chain (used)


5

6 Position Name
7 -------- ----
(continues on next page)

532 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


8 - INGRESS
9 0 starter.tween_factory2
10 1 starter.tween_factory1
11 2 pyramid.tweens.excview_tween_factory
12 - MAIN
13

14 Implicit Tween Chain (not used)


15

16 Position Name
17 -------- ----
18 - INGRESS
19 0 pyramid_debugtoolbar.toolbar.toolbar_tween_factory
20 1 pyramid.tweens.excview_tween_factory
21 - MAIN

Here’s the application configuration section of the development.ini used by the above ptweens
command which reports that the explicit tween chain is used:

1 [app:main]
2 use = egg:starter
3 reload_templates = true
4 debug_authorization = false
5 debug_notfound = false
6 debug_routematch = false
7 debug_templates = true
8 default_locale_name = en
9 pyramid.include = pyramid_debugtoolbar
10 pyramid.tweens = starter.tween_factory2
11 starter.tween_factory1
12 pyramid.tweens.excview_tween_factory

See Registering Tweens for more information about tweens.

Invoking a Request

See also:

See also the output of prequest –help.

0.3. Narrative Documentation 533


The Pyramid Web Framework, Version 1.9.4

You can use the prequest command-line utility to send a request to your application and see the response
body without starting a server.

There are two required arguments to prequest:

• The config file/section: follows the format config_file#section_name, where


config_file is the path to your application’s .ini file and section_name is the
app section name inside the .ini file. The section_name is optional; it defaults to main.
For example: development.ini.

• The path: this should be the non-URL-quoted path element of the URL to the resource you’d like
to be rendered on the server. For example, /.

For example:

$ $VENV/bin/prequest development.ini /

This will print the body of the response to the console on which it was invoked.

Several options are supported by prequest. These should precede any config file name or URL.

prequest has a -d (i.e., --display-headers) option which prints the status and headers returned
by the server before the output:

$ $VENV/bin/prequest -d development.ini /

This will print the status, headers, and the body of the response to the console.

You can add request header values by using the --header option:

$ $VENV/bin/prequest --header=Host:example.com development.ini /

Headers are added to the WSGI environment by converting them to their CGI/WSGI equivalents (e.g.,
Host=example.com will insert the HTTP_HOST header variable as the value example.com).
Multiple --header options can be supplied. The special header value content-type sets the
CONTENT_TYPE in the WSGI environment.

By default, prequest sends a GET request. You can change this by using the -m (aka --method)
option. GET, HEAD, POST, and DELETE are currently supported. When you use POST, the standard
input of the prequest process is used as the POST body:

534 Contents
The Pyramid Web Framework, Version 1.9.4

$ $VENV/bin/prequest -mPOST development.ini / < somefile

Using Custom Arguments to Python when Running p* Scripts

New in version 1.5.

Each of Pyramid’s console scripts (pserve, pviews, etc.) can be run directly using python3 -m,
allowing custom arguments to be sent to the Python interpreter at runtime. For example:

python3 -m pyramid.scripts.pserve development.ini

Showing All Installed Distributions and Their Versions

New in version 1.5.

See also:

See also the output of pdistreport –help.

You can use the pdistreport command to show the Pyramid version in use, the Python version in use,
and all installed versions of Python distributions in your Python environment:

$ $VENV/bin/pdistreport
Pyramid version: 1.5dev
Platform Linux-3.2.0-51-generic-x86_64-with-debian-wheezy-sid
Packages:
authapp 0.0
/home/chrism/projects/foo/src/authapp
beautifulsoup4 4.1.3
/home/chrism/projects/foo/lib/python2.7/site-packages/
,→beautifulsoup4-4.1.3-py2.7.egg

... more output ...

pdistreport takes no options. Its output is useful to paste into a pastebin when you are having problems
and need someone with more familiarity with Python packaging and distribution than you have to look at
your environment.

0.3. Narrative Documentation 535


The Pyramid Web Framework, Version 1.9.4

Writing a Script

All web applications are, at their hearts, systems which accept a request and return a response. When a
request is accepted by a Pyramid application, the system receives state from the request which is later relied
on by your application code. For example, one view callable may assume it’s working against a request that
has a request.matchdict of a particular composition, while another assumes a different composition
of the matchdict.

In the meantime, it’s convenient to be able to write a Python script that can work ”in a Pyramid envi-
ronment”, for instance to update database tables used by your Pyramid application. But a ”real” Pyramid
environment doesn’t have a completely static state independent of a request; your application (and Pyra-
mid itself) is almost always reliant on being able to obtain information from a request. When you run a
Python script that simply imports code from your application and tries to run it, there just is no request
data, because there isn’t any real web request. Therefore some parts of your application and some Pyramid
APIs will not work.

For this reason, Pyramid makes it possible to run a script in an environment much like the environ-
ment produced when a particular request reaches your Pyramid application. This is achieved by using
the pyramid.paster.bootstrap() command in the body of your script.

New in version 1.1: pyramid.paster.bootstrap()

Changed in version 1.8: Added the ability for bootstrap to cleanup automatically via the with state-
ment.

In the simplest case, pyramid.paster.bootstrap() can be used with a single argument, which
accepts the PasteDeploy .ini file representing your Pyramid application’s configuration as a single ar-
gument:

from pyramid.paster import bootstrap

with bootstrap('/path/to/my/development.ini') as env:


print(env['request'].route_url('home'))

pyramid.paster.bootstrap() returns a dictionary containing framework-related information.


This dictionary will always contain a request object as its request key.

The following keys are available in the env dictionary returned by pyramid.paster.bootstrap():

request

A pyramid.request.Request object implying the current request state for your script.

536 Contents
The Pyramid Web Framework, Version 1.9.4

app

The WSGI application object generated by bootstrapping.

root

The resource root of your Pyramid application. This is an object generated by the root factory
configured in your application.

registry

The application registry of your Pyramid application.

closer

A parameterless callable that can be used to pop an internal Pyramid threadlocal stack
(used by pyramid.threadlocal.get_current_registry() and pyramid.
threadlocal.get_current_request()) when your scripting job is finished.

Let’s assume that the /path/to/my/development.ini file used in the example above looks like
so:

[pipeline:main]
pipeline = translogger
another

[filter:translogger]
filter_app_factory = egg:Paste#translogger
setup_console_handler = False
logger_name = wsgi

[app:another]
use = egg:MyProject

The configuration loaded by the above bootstrap example will use the configuration implied by
the [pipeline:main] section of your configuration file by default. Specifying /path/to/
my/development.ini is logically equivalent to specifying /path/to/my/development.
ini#main. In this case, we’ll be using a configuration that includes an app object which is wrapped
in the Paste ”translogger” middleware (which logs requests to the console).

You can also specify a particular section of the PasteDeploy .ini file to load instead of main:

0.3. Narrative Documentation 537


The Pyramid Web Framework, Version 1.9.4

from pyramid.paster import bootstrap

with bootstrap('/path/to/my/development.ini#another') as env:


print(env['request'].route_url('home'))

The above example specifies the another app, pipeline, or composite section of your PasteDe-
ploy configuration file. The app object present in the env dictionary returned by pyramid.paster.
bootstrap() will be a Pyramid router.

Changing the Request

By default, Pyramid will generate a request object in the env dictionary for the URL http://
localhost:80/. This means that any URLs generated by Pyramid during the execution of your script
will be anchored here. This is generally not what you want.

So how do we make Pyramid generate the correct URLs?

Assuming that you have a route configured in your application like so:

config.add_route('verify', '/verify/{code}')

You need to inform the Pyramid environment that the WSGI application is handling requests from a certain
base. For example, we want to simulate mounting our application at https://example.com/prefix, to ensure
that the generated URLs are correct for our deployment. This can be done by either mutating the resulting
request object, or more simply by constructing the desired request and passing it into bootstrap():

from pyramid.paster import bootstrap


from pyramid.request import Request

request = Request.blank('/', base_url='https://example.com/prefix')


with bootstrap('/path/to/my/development.ini#another',␣
,→request=request) as env:

print(env['request'].application_url)
# will print 'https://example.com/prefix'

Now you can readily use Pyramid’s APIs for generating URLs:

538 Contents
The Pyramid Web Framework, Version 1.9.4

env['request'].route_url('verify', code='1337')
# will return 'https://example.com/prefix/verify/1337'

Cleanup

If you’re using the with-statement variant then there’s nothing to worry about. However if you’re using
the returned environment directly then when your scripting logic finishes, it’s good manners to call the
closer callback:

from pyramid.paster import bootstrap


env = bootstrap('/path/to/my/development.ini')

# .. do stuff ...

env['closer']()

Setting Up Logging

By default, pyramid.paster.bootstrap() does not configure logging parameters present in the


configuration file. If you’d like to configure logging based on [logger] and related sections in the
configuration file, use the following command:

import pyramid.paster
pyramid.paster.setup_logging('/path/to/my/development.ini')

See Logging for more information on logging within Pyramid.

Making Your Script into a Console Script

A ”console script” is setuptools terminology for a script that gets installed into the bin directory of a
Python virtual environment (or ”base” Python environment) when a distribution which houses that script
is installed. Because it’s installed into the bin directory of a virtual environment when the distribution is
installed, it’s a convenient way to package and distribute functionality that you can call from the command-
line. It’s often more convenient to create a console script than it is to create a .py script and instruct people

0.3. Narrative Documentation 539


The Pyramid Web Framework, Version 1.9.4

to call it with the ”right” Python interpreter. A console script generates a file that lives in bin, and when
it’s invoked it will always use the ”right” Python environment, which means it will always be invoked in
an environment where all the libraries it needs (such as Pyramid) are available.

In general, you can make your script into a console script by doing the following:

• Use an existing distribution (such as one you’ve already created via cookiecutter) or create a
new distribution that possesses at least one package or module. It should, within any module within
the distribution, house a callable (usually a function) that takes no arguments and which runs any of
the code you wish to run.

• Add a [console_scripts] section to the entry_points argument of the distribution which


creates a mapping between a script name and a dotted name representing the callable you added to
your distribution.

• Run pip install -e . or pip install . to get your distribution reinstalled. When you
reinstall your distribution, a file representing the script that you named in the last step will be in
the bin directory of the virtual environment in which you installed the distribution. It will be
executable. Invoking it from a terminal will execute your callable.

As an example, let’s create some code that can be invoked by a console script that prints the deployment
settings of a Pyramid application. To do so, we’ll pretend you have a distribution with a package in it
named myproject. Within this package, we’ll pretend you’ve added a scripts.py module which
contains the following code:

1 # myproject.scripts module
2

3 import optparse
4 import sys
5 import textwrap
6

7 from pyramid.paster import bootstrap


8

9 def settings_show():
10 description = """\
11 Print the deployment settings for a Pyramid application. ␣
,→Example:

12 'show_settings deployment.ini'
13 """
14 usage = "usage: %prog config_uri"
15 parser = optparse.OptionParser(
16 usage=usage,
(continues on next page)

540 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


17 description=textwrap.dedent(description)
18 )
19 parser.add_option(
20 '-o', '--omit',
21 dest='omit',
22 metavar='PREFIX',
23 type='string',
24 action='append',
25 help=("Omit settings which start with PREFIX (you can use␣
,→this "

26 "option multiple times)")


27 )
28

29 options, args = parser.parse_args(sys.argv[1:])


30 if not len(args) >= 1:
31 print('You must provide at least one argument')
32 return 2
33 config_uri = args[0]
34 omit = options.omit
35 if omit is None:
36 omit = []
37 with bootstrap(config_uri) as env:
38 settings = env['registry'].settings
39 for k, v in settings.items():
40 if any([k.startswith(x) for x in omit]):
41 continue
42 print('%-40s %-20s' % (k, v))

This script uses the Python optparse module to allow us to make sense out of extra arguments passed
to the script. It uses the pyramid.paster.bootstrap() function to get information about the
application defined by a config file, and prints the deployment settings defined in that config file.

After adding this script to the package, you’ll need to tell your distribution’s setup.py about its existence.
Within your distribution’s top-level directory, your setup.py file will look something like this:

1 import os
2

3 from setuptools import setup, find_packages


4

5 here = os.path.abspath(os.path.dirname(__file__))
6 with open(os.path.join(here, 'README.txt')) as f:
(continues on next page)

0.3. Narrative Documentation 541


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


7 README = f.read()
8 with open(os.path.join(here, 'CHANGES.txt')) as f:
9 CHANGES = f.read()
10

11 requires = ['pyramid', 'pyramid_debugtoolbar']


12

13 tests_require = [
14 'WebTest >= 1.3.1', # py3 compat
15 'pytest', # includes virtualenv
16 'pytest-cov',
17 ]
18

19 setup(name='MyProject',
20 version='0.0',
21 description='My project',
22 long_description=README + '\n\n' + CHANGES,
23 classifiers=[
24 "Programming Language :: Python",
25 "Framework :: Pyramid",
26 "Topic :: Internet :: WWW/HTTP",
27 "Topic :: Internet :: WWW/HTTP :: WSGI :: Application",
28 ],
29 author='',
30 author_email='',
31 url='',
32 keywords='web pyramid pylons',
33 packages=find_packages(),
34 include_package_data=True,
35 zip_safe=False,
36 install_requires=requires,
37 extras_require={
38 'testing': tests_require,
39 },
40 entry_points = """\
41 [paste.app_factory]
42 main = myproject:main
43 """,
44 )

We’re going to change the setup.py file to add a [console_scripts] section within the
entry_points string. Within this section, you should specify a scriptname = dotted.path.
to:yourfunction line. For example:

542 Contents
The Pyramid Web Framework, Version 1.9.4

[console_scripts]
show_settings = myproject.scripts:settings_show

The show_settings name will be the name of the script that is installed into bin. The colon (:)
between myproject.scripts and settings_show above indicates that myproject.scripts
is a Python module, and settings_show is the function in that module which contains the code you’d
like to run as the result of someone invoking the show_settings script from their command line.

The result will be something like:

1 import os
2

3 from setuptools import setup, find_packages


4

5 here = os.path.abspath(os.path.dirname(__file__))
6 with open(os.path.join(here, 'README.txt')) as f:
7 README = f.read()
8 with open(os.path.join(here, 'CHANGES.txt')) as f:
9 CHANGES = f.read()
10

11 requires = ['pyramid', 'pyramid_debugtoolbar']


12

13 tests_require = [
14 'WebTest >= 1.3.1', # py3 compat
15 'pytest', # includes virtualenv
16 'pytest-cov',
17 ]
18

19 setup(name='MyProject',
20 version='0.0',
21 description='My project',
22 long_description=README + '\n\n' + CHANGES,
23 classifiers=[
24 "Programming Language :: Python",
25 "Framework :: Pyramid",
26 "Topic :: Internet :: WWW/HTTP",
27 "Topic :: Internet :: WWW/HTTP :: WSGI :: Application",
28 ],
29 author='',
30 author_email='',
31 url='',
(continues on next page)

0.3. Narrative Documentation 543


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


32 keywords='web pyramid pylons',
33 packages=find_packages(),
34 include_package_data=True,
35 zip_safe=False,
36 install_requires=requires,
37 extras_require={
38 'testing': tests_require,
39 },
40 entry_points = """\
41 [paste.app_factory]
42 main = myproject:main
43 [console_scripts]
44 show_settings = myproject.scripts:settings_show
45 """,
46 )

Once you’ve done this, invoking $VENV/bin/pip install -e . will install a file named
show_settings into the $somevenv/bin directory with a small bit of Python code that points to
your entry point. It will be executable. Running it without any arguments will print an error and exit.
Running it with a single argument that is the path of a config file will print the settings. Running it with
an --omit=foo argument will omit the settings that have keys that start with foo. Running it with two
”omit” options (e.g., --omit=foo --omit=bar) will omit all settings that have keys that start with
either foo or bar:

$ $VENV/bin/show_settings development.ini --omit=pyramid --


,→omit=debugtoolbar

debug_routematch False
debug_templates True
reload_templates True
mako.directories []
debug_notfound False
default_locale_name en
reload_resources False
debug_authorization False
reload_assets False
prevent_http_cache False

Pyramid’s pserve, pcreate, pshell, prequest, ptweens, and other p* scripts are implemented
as console scripts. When you invoke one of those, you are using a console script.

544 Contents
The Pyramid Web Framework, Version 1.9.4

0.3.21 Internationalization and Localization

Internationalization (i18n) is the act of creating software with a user interface that can potentially be
displayed in more than one language or cultural context. Localization (l10n) is the process of displaying
the user interface of an internationalized application in a particular language or cultural context.

Pyramid offers internationalization and localization subsystems that can be used to translate the text of
buttons, error messages, and other software- and template-defined values into the native language of a user
of your application.

Creating a Translation String

While you write your software, you can insert specialized markup into your Python code that makes it
possible for the system to translate text values into the languages used by your application’s users. This
markup creates a translation string. A translation string is an object that behaves mostly like a normal
Unicode object, except that it also carries around extra information related to its job as part of the Pyramid
translation machinery.

Using the TranslationString Class

The most primitive way to create a translation string is to use the pyramid.i18n.
TranslationString callable:

1 from pyramid.i18n import TranslationString


2 ts = TranslationString('Add')

This creates a Unicode-like object that is a TranslationString.

For people more familiar with Zope i18n, a TranslationString is a lot like a zope.
i18nmessageid.Message object. It is not a subclass, however. For people more familiar with Pylons
or Django i18n, using a TranslationString is a lot like using ”lazy” versions of related gettext APIs.

The first argument to TranslationString is the msgid; it is required. It represents the key into
the translation mappings provided by a particular localization. The msgid argument must be a Unicode
object or an ASCII string. The msgid may optionally contain replacement markers. For instance:

0.3. Narrative Documentation 545


The Pyramid Web Framework, Version 1.9.4

1 from pyramid.i18n import TranslationString


2 ts = TranslationString('Add ${number}')

Within the string above, ${number} is a replacement marker. It will be replaced by whatever is in the
mapping for a translation string. The mapping may be supplied at the same time as the replacement marker
itself:

1 from pyramid.i18n import TranslationString


2 ts = TranslationString('Add ${number}', mapping={'number':1})

Any number of replacement markers can be present in the msgid value, any number of times. Only markers
which can be replaced by the values in the mapping will be replaced at translation time. The others will
not be interpolated and will be output literally.
A translation string should also usually carry a domain. The domain represents a translation category to
disambiguate it from other translations of the same msgid, in case they conflict.

1 from pyramid.i18n import TranslationString


2 ts = TranslationString('Add ${number}', mapping={'number':1},
3 domain='form')

The above translation string named a domain of form. A translator function will often use the domain
to locate the right translator file on the filesystem which contains translations for a given domain. In this
case, if it were trying to translate our msgid to German, it might try to find a translation from a gettext file
within a translation directory like this one:

locale/de/LC_MESSAGES/form.mo

In other words, it would want to take translations from the form.mo translation file in the German lan-
guage.
Finally, the TranslationString constructor accepts a default argument. If a default argument is sup-
plied, it replaces usages of the msgid as the default value for the translation string. When default is
None, the msgid value passed to a TranslationString is used as an implicit message identifier. Message
identifiers are matched with translations in translation files, so it is often useful to create translation strings
with ”opaque” message identifiers unrelated to their default text:

1 from pyramid.i18n import TranslationString


2 ts = TranslationString('add-number', default='Add ${number}',
3 domain='form', mapping={'number':1})

When default text is used, Default text objects may contain replacement values.

546 Contents
The Pyramid Web Framework, Version 1.9.4

Using the TranslationStringFactory Class

Another way to generate a translation string is to use the TranslationStringFactory object. This
object is a translation string factory. Basically a translation string factory presets the domain value of
any translation string generated by using it. For example:

1 from pyramid.i18n import TranslationStringFactory


2 _ = TranslationStringFactory('pyramid')
3 ts = _('add-number', default='Add ${number}', mapping={'number':1})

We assigned the translation string factory to the name _. This is a convention which will be supported
by translation file generation tools.

After assigning _ to the result of a TranslationStringFactory(), the subsequent result of calling


_ will be a TranslationString instance. Even though a domain value was not passed to _ (as
would have been necessary if the TranslationString constructor were used instead of a translation
string factory), the domain attribute of the resulting translation string will be pyramid. As a result, the
previous code example is completely equivalent (except for spelling) to:

1 from pyramid.i18n import TranslationString as _


2 ts = _('add-number', default='Add ${number}', mapping={'number':1},
3 domain='pyramid')

You can set up your own translation string factory much like the one provided above by using the
TranslationStringFactory class. For example, if you’d like to create a translation string fac-
tory which presets the domain value of generated translation strings to form, you’d do something like
this:

1 from pyramid.i18n import TranslationStringFactory


2 _ = TranslationStringFactory('form')
3 ts = _('add-number', default='Add ${number}', mapping={'number':1})

Creating a unique domain for your application via a translation string factory is best practice. Using your
own unique translation domain allows another person to reuse your application without needing to merge
your translation files with their own. Instead they can just include your package’s translation directory via
the pyramid.config.Configurator.add_translation_dirs() method.

For people familiar with Zope internationalization, a TranslationStringFactory is a lot like a zope.
i18nmessageid.MessageFactory object. It is not a subclass, however.

0.3. Narrative Documentation 547


The Pyramid Web Framework, Version 1.9.4

Working with gettext Translation Files

The basis of Pyramid translation services is GNU gettext. Once your application source code files and
templates are marked up with translation markers, you can work on translations by creating various kinds
of gettext files.

The steps a developer must take to work with gettext message catalog files within a Pyramid appli-
cation are very similar to the steps a Pylons developer must take to do the same. See the Pylons Interna-
tionalization and Localization documentation for more information.

GNU gettext uses three types of files in the translation framework, .pot files, .po files, and .mo files.

.pot (Portable Object Template) files

A .pot file is created by a program which searches through your project’s source code and
which picks out every message identifier passed to one of the _() functions (e.g., translation
string constructions). The list of all message identifiers is placed into a .pot file, which
serves as a template for creating .po files.

.po (Portable Object) files

The list of messages in a .pot file are translated by a human to a particular language; the
result is saved as a .po file.

.mo (Machine Object) files

A .po file is turned into a machine-readable binary file, which is the .mo file. Compiling the
translations to machine code makes the localized program start faster.

The tools for working with gettext translation files related to a Pyramid application are Lingua and Gettext.
Lingua can scrape i18n references out of Python and Chameleon files and create the .pot file. Gettext
includes msgmerge tool to update a .po file from an updated .pot file and msgfmt to compile .po
files to .mo files.

Installing Lingua and Gettext

In order for the commands related to working with gettext translation files to work properly, you will
need to have Lingua and Gettext installed into the same environment in which Pyramid is installed.

548 Contents
The Pyramid Web Framework, Version 1.9.4

Installation on UNIX

Gettext is often already installed on UNIX systems. You can check if it is installed by testing if the msgfmt
command is available. If it is not available you can install it through the packaging system from your OS; the
package name is almost always gettext. For example on a Debian or Ubuntu system run this command:

$ sudo apt-get install gettext

Installing Lingua is done with the Python packaging tools. If the virtual environment into which you’ve
installed your Pyramid application lives at the environment variable $VENV, you can install Lingua like
so:

$ $VENV/bin/pip install lingua

Installation on Windows

There are several ways to install Gettext on Windows: it is included in the Cygwin collection, or you can
use the installer from the GnuWin32, or compile it yourself. Make sure the installation path is added to
your $PATH.

Installing Lingua is done with the Python packaging tools. If the virtual environment into which you’ve
installed your Pyramid application lives at the environment variable %VENV%, you can install Lingua like
so:

c:\> %VENV%\Scripts\pip install lingua

Extracting Messages from Code and Templates

Once Lingua is installed, you may extract a message catalog template from the code and Chameleon tem-
plates which reside in your Pyramid application. You run a pot-create command to extract the mes-
sages:

$ cd /file/path/to/myapplication_setup.py
$ mkdir -p myapplication/locale
$ $VENV/bin/pot-create -o myapplication/locale/myapplication.pot src

The message catalog .pot template will end up in myapplication/locale/myapplication.


pot.

0.3. Narrative Documentation 549


The Pyramid Web Framework, Version 1.9.4

Initializing a Message Catalog File

Once you’ve extracted messages into a .pot file (see Extracting Messages from Code and Templates), to
begin localizing the messages present in the .pot file, you need to generate at least one .po file. A .po
file represents translations of a particular set of messages to a particular locale. Initialize a .po file for a
specific locale from a pre-generated .pot template by using the msginit command from Gettext:

$ cd /file/path/to/myapplication_setup.py
$ cd myapplication/locale
$ mkdir -p es/LC_MESSAGES
$ msginit -l es -o es/LC_MESSAGES/myapplication.po

This will create a new message catalog .po file in myapplication/locale/es/LC_MESSAGES/


myapplication.po.

Once the file is there, it can be worked on by a human translator. One tool which may help with this is
Poedit.

Note that Pyramid itself ignores the existence of all .po files. For a running application to have translations
available, a .mo file must exist. See Compiling a Message Catalog File.

Updating a Catalog File

If more translation strings are added to your application, or translation strings change, you will need to
update existing .po files based on changes to the .pot file, so that the new and changed messages can
also be translated or re-translated.

First, regenerate the .pot file as per Extracting Messages from Code and Templates. Then use the
msgmerge command from Gettext.

$ cd /file/path/to/myapplication_setup.py
$ cd myapplication/locale
$ msgmerge --update es/LC_MESSAGES/myapplication.po myapplication.
,→pot

Compiling a Message Catalog File

Finally, to prepare an application for performing actual runtime translations, compile .po files to .mo
files using the msgfmt command from Gettext:

550 Contents
The Pyramid Web Framework, Version 1.9.4

$ cd /file/path/to/myapplication_setup.py
$ msgfmt -o myapplication/locale/es/LC_MESSAGES/myapplication.mo \
myapplication/locale/es/LC_MESSAGES/myapplication.po

This will create a .mo file for each .po file in your application. As long as the translation directory in
which the .mo file ends up in is configured into your application (see Adding a Translation Directory),
these translations will be available to Pyramid.

Using a Localizer

A localizer is an object that allows you to perform translation or pluralization ”by hand” in an application.
You may use the pyramid.request.Request.localizer attribute to obtain a localizer. The
localizer object will be configured to produce translations implied by the active locale negotiator, or a
default localizer object if no explicit locale negotiator is registered.

1 def aview(request):
2 localizer = request.localizer

If you need to create a localizer for a locale, use the pyramid.i18n.make_localizer()


function.

Performing a Translation

A localizer has a translate method which accepts either a translation string or a Unicode string and
which returns a Unicode object representing the translation. Generating a translation in a view component
of an application might look like so:

1 from pyramid.i18n import TranslationString


2

3 ts = TranslationString('Add ${number}', mapping={'number':1},


4 domain='pyramid')
5

6 def aview(request):
7 localizer = request.localizer
8 translated = localizer.translate(ts) # translation string
9 # ... use translated ...

0.3. Narrative Documentation 551


The Pyramid Web Framework, Version 1.9.4

The request.localizer attribute will be a pyramid.i18n.Localizer object bound to the lo-


cale name represented by the request. The translation returned from its pyramid.i18n.Localizer.
translate() method will depend on the domain attribute of the provided translation string as well
as the locale of the localizer.

If you’re using Chameleon templates, you don’t need to pre-translate translation strings this way. See
Chameleon Template Support for Translation Strings.

Performing a Pluralization

A localizer has a pluralize method with the following signature:

1 def pluralize(singular, plural, n, domain=None, mapping=None):


2 ...

The simplest case is the singular and plural arguments being passed as Unicode literals. This re-
turns the appropriate literal according to the locale pluralization rules for the number n, and interpolates
mapping.

1 def aview(request):
2 localizer = request.localizer
3 translated = localizer.pluralize('Item', 'Items', 1, 'mydomain')
4 # ... use translated ...

However, for support of other languages, the singular argument should be a Unicode value representing
a message identifier. In this case the plural value is ignored. domain should be a translation domain,
and mapping should be a dictionary that is used for replacement value interpolation of the translated
string.

The value of n will be used to find the appropriate plural form for the current language, and pluralize
will return a Unicode translation for the message id singular. The message file must have defined
singular as a translation with plural forms.

The argument provided as singular may be a translation string object, but the domain and mapping
information attached is ignored.

552 Contents
The Pyramid Web Framework, Version 1.9.4

1 def aview(request):
2 localizer = request.localizer
3 num = 1
4 translated = localizer.pluralize('item_plural', '${number} items
,→',

5 num, 'mydomain', mapping={'number':num})

The corresponding message catalog must have language plural definitions and plural alternatives set.

1 "Plural-Forms: nplurals=3; plural=n==0 ? 0 : n==1 ? 1 : 2;"


2

3 msgid "item_plural"
4 msgid_plural ""
5 msgstr[0] "No items"
6 msgstr[1] "${number} item"
7 msgstr[2] "${number} items"

More information on complex plurals can be found in the gettext documentation.

Obtaining the Locale Name for a Request

You can obtain the locale name related to a request by using the pyramid.request.Request.
locale_name() attribute of the request.

1 def aview(request):
2 locale_name = request.locale_name

The locale name of a request is dynamically computed; it will be the locale name negotiated by the cur-
rently active locale negotiator, or the default locale name if the locale negotiator returns None. You
can change the default locale name by changing the pyramid.default_locale_name setting. See
Default Locale Name.

Once locale_name() is first run, the locale name is stored on the request object. Subsequent calls to
locale_name() will return the stored locale name without invoking the locale negotiator. To avoid
this caching, you can use the pyramid.i18n.negotiate_locale_name() function:

0.3. Narrative Documentation 553


The Pyramid Web Framework, Version 1.9.4

1 from pyramid.i18n import negotiate_locale_name


2

3 def aview(request):
4 locale_name = negotiate_locale_name(request)

You can also obtain the locale name related to a request using the locale_name attribute of a localizer.

1 def aview(request):
2 localizer = request.localizer
3 locale_name = localizer.locale_name

Obtaining the locale name as an attribute of a localizer is equivalent to obtaining a locale name by asking
for the locale_name() attribute.

Performing Date Formatting and Currency Formatting

Pyramid does not itself perform date and currency formatting for different locales. However, Babel can
help you do this via the babel.core.Locale class. The Babel documentation for this class provides
minimal information about how to perform date and currency related locale operations. See Installing
Lingua and Gettext for information about how to install Babel.

The babel.core.Locale class requires a locale name as an argument to its constructor. You can use
Pyramid APIs to obtain the locale name for a request to pass to the babel.core.Locale constructor.
See Obtaining the Locale Name for a Request. For example:

1 from babel.core import Locale


2

3 def aview(request):
4 locale_name = request.locale_name
5 locale = Locale(locale_name)

Chameleon Template Support for Translation Strings

When a translation string is used as the subject of textual rendering by a Chameleon template renderer,
it will automatically be translated to the requesting user’s language if a suitable translation exists. This is
true of both the ZPT and text variants of the Chameleon template renderers.

For example, in a Chameleon ZPT template, the translation string represented by


”some_translation_string” in each example below will go through translation before being rendered:

554 Contents
The Pyramid Web Framework, Version 1.9.4

1 <span tal:content="some_translation_string"/>

1 <span tal:replace="some_translation_string"/>

1 <span>${some_translation_string}</span>

1 <a tal:attributes="href some_translation_string">Click here</a>

The features represented by attributes of the i18n namespace of Chameleon will also consult the Pyramid
translations. See https://chameleon.readthedocs.io/en/latest/reference.html#translation-i18n.

Unlike when Chameleon is used outside of Pyramid, when it is used within Pyramid, it does not
support use of the zope.i18n translation framework. Applications which use Pyramid should use the
features documented in this chapter rather than zope.i18n.

Third party Pyramid template renderers might not provide this support out of the box and may need special
code to do an equivalent. For those, you can always use the more manual translation facility described in
Performing a Translation.

Mako Pyramid i18n Support

There exists a recipe within the Pyramid Community Cookbook named Mako Internationalization which
explains how to add idiomatic i18n support to Mako templates.

Jinja2 Pyramid i18n Support

The add-on pyramid_jinja2 provides a scaffold with an example of how to use internationalization with
Jinja2 in Pyramid. See the documentation sections Internalization (i18n) and Paster Template I18N.

Localization-Related Deployment Settings

A Pyramid application will have a pyramid.default_locale_name setting. This value represents


the default locale name used when the locale negotiator returns None. Pass it to the Configurator
constructor at startup time:

0.3. Narrative Documentation 555


The Pyramid Web Framework, Version 1.9.4

1 from pyramid.config import Configurator


2 config = Configurator(settings={'pyramid.default_locale_name':'de'})

You may alternately supply a pyramid.default_locale_name via an application’s .ini file:

1 [app:main]
2 use = egg:MyProject
3 pyramid.reload_templates = true
4 pyramid.debug_authorization = false
5 pyramid.debug_notfound = false
6 pyramid.default_locale_name = de

If this value is not supplied via the Configurator constructor or via a config file, it will default to en.

If this setting is supplied within the Pyramid application .ini file, it will be available as a settings key:

1 from pyramid.threadlocal import get_current_registry


2 settings = get_current_registry().settings
3 default_locale_name = settings['pyramid.default_locale_name']

”Detecting” Available Languages

Other systems provide an API that returns the set of ”available languages” as indicated by the union of all
languages in all translation directories on disk at the time of the call to the API.

It is by design that Pyramid doesn’t supply such an API. Instead the application itself is responsible for
knowing the ”available languages”. The rationale is this: any particular application deployment must
always know which languages it should be translatable to anyway, regardless of which translation files are
on disk.

Here’s why: it’s not a given that because translations exist in a particular language within the registered set
of translation directories that this particular deployment wants to allow translation to that language. For
example, some translations may exist but they may be incomplete or incorrect. Or there may be translations
to a language but not for all translation domains.

Any nontrivial application deployment will always need to be able to selectively choose to allow only some
languages even if that set of languages is smaller than all those detected within registered translation direc-
tories. The easiest way to allow for this is to make the application entirely responsible for knowing which

556 Contents
The Pyramid Web Framework, Version 1.9.4

languages are allowed to be translated to instead of relying on the framework to divine this information
from translation directory file info.

You can set up a system to allow a deployer to select available languages based on convention by using the
pyramid.settings mechanism.

Allow a deployer to modify your application’s .ini file:

1 [app:main]
2 use = egg:MyProject
3 # ...
4 available_languages = fr de en ru

Then as a part of the code of a custom locale negotiator:

1 from pyramid.settings import aslist


2

3 def my_locale_negotiator(request):
4 languages = aslist(request.registry.settings['available_
,→languages'])

5 # ...

This is only a suggestion. You can create your own ”available languages” configuration scheme as neces-
sary.

Activating Translation

By default, a Pyramid application performs no translation. To turn translation on you must:

• add at least one translation directory to your application.

• ensure that your application sets the locale name correctly.

0.3. Narrative Documentation 557


The Pyramid Web Framework, Version 1.9.4

Adding a Translation Directory

gettext is the underlying machinery behind the Pyramid translation machinery. A translation directory is
a directory organized to be useful to gettext. A translation directory usually includes a listing of language
directories, each of which itself includes an LC_MESSAGES directory. Each LC_MESSAGES directory
should contain one or more .mo files. Each .mo file represents a message catalog, which is used to provide
translations to your application.
Adding a translation directory registers all of its constituent message catalog files within your Pyramid
application to be available to use for translation services. This includes all of the .mo files found within
all LC_MESSAGES directories within each locale directory in the translation directory.
You can add a translation directory imperatively by using the pyramid.config.Configurator.
add_translation_dirs() during application startup. For example:

1 from pyramid.config import Configurator


2 config.add_translation_dirs('my.application:locale/',
3 'another.application:locale/')

A message catalog in a translation directory added via add_translation_dirs() will be merged


into translations from a message catalog added earlier if both translation directories contain translations
for the same locale and translation domain.

Setting the Locale

When the default locale negotiator (see The Default Locale Negotiator) is in use, you can inform Pyramid
of the current locale name by doing any of these things before any translations need to be performed:
• Set the _LOCALE_ attribute of the request to a valid locale name (usually directly within view code),
e.g., request._LOCALE_ = 'de'.
• Ensure that a valid locale name value is in the request.params dictionary under the key
named _LOCALE_. This is usually the result of passing a _LOCALE_ value in the query string
or in the body of a form post associated with a request. For example, visiting http://my.
application?_LOCALE_=de.
• Ensure that a valid locale name value is in the request.cookies dictionary under the key named
_LOCALE_. This is usually the result of setting a _LOCALE_ cookie in a prior response, e.g.,
response.set_cookie('_LOCALE_', 'de').

If this locale negotiation scheme is inappropriate for a particular application, you can configure a
custom locale negotiator function into that application as required. See Using a Custom Locale Negotiator.

558 Contents
The Pyramid Web Framework, Version 1.9.4

Locale Negotiators

A locale negotiator informs the operation of a localizer by telling it what locale name is related to a
particular request. A locale negotiator is a bit of code which accepts a request and which returns a lo-
cale name. It is consulted when pyramid.i18n.Localizer.translate() or pyramid.i18n.
Localizer.pluralize() is invoked. It is also consulted when locale_name() is accessed or
when negotiate_locale_name() is invoked.

The Default Locale Negotiator

Most applications can make use of the default locale negotiator, which requires no additional coding or
configuration.

The default locale negotiator implementation named default_locale_negotiator uses the fol-
lowing set of steps to determine the locale name.

• First the negotiator looks for the _LOCALE_ attribute of the request object (possibly set directly by
view code or by a listener for an event).

• Then it looks for the request.params['_LOCALE_'] value.

• Then it looks for the request.cookies['_LOCALE_'] value.

• If no locale can be found via the request, it falls back to using the default locale name (see
Localization-Related Deployment Settings).

• Finally if the default locale name is not explicitly set, it uses the locale name en.

Using a Custom Locale Negotiator

Locale negotiation is sometimes policy-laden and complex. If the (simple) default locale negotiation
scheme described in Activating Translation is inappropriate for your application, you may create a spe-
cial locale negotiator. Subsequently you may override the default locale negotiator by adding your newly
created locale negotiator to your application’s configuration.

A locale negotiator is simply a callable which accepts a request and returns a single locale name or None
if no locale can be determined.

Here’s an implementation of a simple locale negotiator:

0.3. Narrative Documentation 559


The Pyramid Web Framework, Version 1.9.4

1 def my_locale_negotiator(request):
2 locale_name = request.params.get('my_locale')
3 return locale_name

If a locale negotiator returns None, it signifies to Pyramid that the default application locale name should
be used.

You may add your newly created locale negotiator to your application’s configuration by passing
an object which can act as the negotiator (or a dotted Python name referring to the object) as the
locale_negotiator argument of the Configurator instance during application startup. For ex-
ample:

1 from pyramid.config import Configurator


2 config = Configurator(locale_negotiator=my_locale_negotiator)

Alternatively, use the pyramid.config.Configurator.set_locale_negotiator()


method.

For example:

1 from pyramid.config import Configurator


2 config = Configurator()
3 config.set_locale_negotiator(my_locale_negotiator)

0.3.22 Virtual Hosting

”Virtual hosting” is, loosely, the act of serving a Pyramid application or a portion of a Pyramid application
under a URL space that it does not ”naturally” inhabit.

Pyramid provides facilities for serving an application under a URL ”prefix”, as well as serving a portion
of a traversal based application under a root URL.

560 Contents
The Pyramid Web Framework, Version 1.9.4

Hosting an Application Under a URL Prefix

Pyramid supports a common form of virtual hosting whereby you can host a Pyramid application as a ”sub-
set” of some other site (e.g., under http://example.com/mypyramidapplication/ as opposed
to under http://example.com/).

If you use a ”pure Python” environment, this functionality can be provided by rutter, forming a ”composite”
WSGI application. Alternatively, you can use mod_wsgi to serve your application, which handles this
virtual hosting translation for you ”under the hood”.

If you use the rutter composite application ”in front” of a Pyramid application or if you use mod_wsgi
to serve up a Pyramid application, nothing special needs to be done within the application for URLs to
be generated that contain a prefix. Rutter and mod_wsgi manipulate the WSGI environment in such a way
that the PATH_INFO and SCRIPT_NAME variables are correct for some given prefix.

Here’s an example of a PasteDeploy configuration snippet that includes a rutter composite.

1 [app:mypyramidapp]
2 use = egg:mypyramidapp
3

4 [composite:main]
5 use = egg:rutter#urlmap
6 /pyramidapp = mypyramidapp

This ”roots” the Pyramid application at the prefix /pyramidapp and serves up the composite as the
”main” application in the file.

If you’re using an Apache server to proxy to a urlmap composite, you may have to use
the ProxyPreserveHost directive to pass the original HTTP_HOST header along to the application,
so URLs get generated properly. As of this writing the urlmap composite does not seem to re-
spect the HTTP_X_FORWARDED_HOST parameter, which will contain the original host header even if
HTTP_HOST is incorrect.

If you use mod_wsgi, you do not need to use a composite application in your .ini file. The
WSGIScriptAlias configuration setting in a mod_wsgi configuration does the work for you:

1 WSGIScriptAlias /pyramidapp /Users/chrism/projects/modwsgi/env/


,→pyramid.wsgi

In the above configuration, we root a Pyramid application at /pyramidapp within the Apache configu-
ration.

0.3. Narrative Documentation 561


The Pyramid Web Framework, Version 1.9.4

Virtual Root Support

Pyramid also supports ”virtual roots”, which can be used in traversal-based (but not URL dispatch-based)
applications.

Virtual root support is useful when you’d like to host some resource in a Pyramid resource tree as an
application under a URL pathname that does not include the resource path itself. For example, you might
want to serve the object at the traversal path /cms as an application reachable via http://example.
com/ (as opposed to http://example.com/cms).

To specify a virtual root, cause an environment variable to be inserted into the WSGI environ named
HTTP_X_VHM_ROOT with a value that is the absolute pathname to the resource object in the resource
tree that should behave as the ”root” resource. As a result, the traversal machinery will respect this value
during traversal (prepending it to the PATH_INFO before traversal starts), and the pyramid.request.
Request.resource_url() API will generate the ”correct” virtually-rooted URLs.

An example of an Apache mod_proxy configuration that will host the /cms subobject as http://
www.example.com/ using this facility is below:

1 NameVirtualHost *:80
2

3 <VirtualHost *:80>
4 ServerName www.example.com
5 RewriteEngine On
6 RewriteRule ^/(.*) http://127.0.0.1:6543/$1 [L,P]
7 ProxyPreserveHost on
8 RequestHeader add X-Vhm-Root /cms
9 </VirtualHost>

Use of the RequestHeader directive requires that the Apache mod_headers module be available
in the Apache environment you’re using.

For a Pyramid application running under mod_wsgi, the same can be achieved using SetEnv:

1 <Location />
2 SetEnv HTTP_X_VHM_ROOT /cms
3 </Location>

Setting a virtual root has no effect when using an application based on URL dispatch.

562 Contents
The Pyramid Web Framework, Version 1.9.4

Further Documentation and Examples

The API documentation in pyramid.traversal documents a pyramid.traversal.


virtual_root() API. When called, it returns the virtual root object (or the physical root object if no
virtual root has been specified).
Running a Pyramid Application under mod_wsgi has detailed information about using mod_wsgi to serve
Pyramid applications.

0.3.23 Unit, Integration, and Functional Testing

Unit testing is, not surprisingly, the act of testing a ”unit” in your application. In this context, a ”unit” is
often a function or a method of a class instance. The unit is also referred to as a ”unit under test”.
The goal of a single unit test is to test only some permutation of the ”unit under test”. If you write a unit
test that aims to verify the result of a particular codepath through a Python function, you need only be
concerned about testing the code that lives in the function body itself. If the function accepts a parameter
that represents a complex application ”domain object” (such as a resource, a database connection, or an
SMTP server), the argument provided to this function during a unit test need not be and likely should not
be a ”real” implementation object. For example, although a particular function implementation may accept
an argument that represents an SMTP server object, and the function may call a method of this object when
the system is operating normally that would result in an email being sent, a unit test of this codepath of
the function does not need to test that an email is actually sent. It just needs to make sure that the function
calls the method of the object provided as an argument that would send an email if the argument happened
to be the ”real” implementation of an SMTP server object.
An integration test, on the other hand, is a different form of testing in which the interaction between two
or more ”units” is explicitly tested. Integration tests verify that the components of your application work
together. You might make sure that an email was actually sent in an integration test.
A functional test is a form of integration test in which the application is run ”literally”. You would have
to make sure that an email was actually sent in a functional test, because it tests your code end to end.
It is often considered best practice to write each type of tests for any given codebase. Unit testing often
provides the opportunity to obtain better ”coverage”: it’s usually possible to supply a unit under test with
arguments and/or an environment which causes all of its potential codepaths to be executed. This is usually
not as easy to do with a set of integration or functional tests, but integration and functional testing provides
a measure of assurance that your ”units” work together, as they will be expected to when your application
is run in production.
The suggested mechanism for unit and integration testing of a Pyramid application is the Python
unittest module. Although this module is named unittest, it is actually capable of driving both unit
and integration tests. A good unittest tutorial is available within Dive Into Python by Mark Pilgrim.
Pyramid provides a number of facilities that make unit, integration, and functional tests easier to write.
The facilities become particularly useful when your code calls into Pyramid-related framework functions.

0.3. Narrative Documentation 563


The Pyramid Web Framework, Version 1.9.4

Test Set Up and Tear Down

Pyramid uses a ”global” (actually thread local) data structure to hold two items: the current request and
the current application registry. These data structures are available via the pyramid.threadlocal.
get_current_request() and pyramid.threadlocal.get_current_registry() func-
tions, respectively. See Thread Locals for information about these functions and the data structures they
return.

If your code uses these get_current_* functions or calls Pyramid code which uses get_current_*
functions, you will need to call pyramid.testing.setUp() in your test setup and you will need to
call pyramid.testing.tearDown() in your test teardown. setUp() pushes a registry onto the
thread local stack, which makes the get_current_* functions work. It returns a Configurator object
which can be used to perform extra configuration required by the code under test. tearDown() pops the
thread local stack.

Normally when a Configurator is used directly with the main block of a Pyramid application, it defers
performing any ”real work” until its .commit method is called (often implicitly by the pyramid.
config.Configurator.make_wsgi_app() method). The Configurator returned by setUp()
is an autocommitting Configurator, however, which performs all actions implied by methods called on it
immediately. This is more convenient for unit testing purposes than needing to call pyramid.config.
Configurator.commit() in each test after adding extra configuration statements.

The use of the setUp() and tearDown() functions allows you to supply each unit test method in a test
case with an environment that has an isolated registry and an isolated request for the duration of a single
test. Here’s an example of using this feature:

1 import unittest
2 from pyramid import testing
3

4 class MyTest(unittest.TestCase):
5 def setUp(self):
6 self.config = testing.setUp()
7

8 def tearDown(self):
9 testing.tearDown()

The above will make sure that get_current_registry() called within a test case method of
MyTest will return the application registry associated with the config Configurator instance. Each
test case method attached to MyTest will use an isolated registry.

The setUp() and tearDown() functions accept various arguments that influence the environment
of the test. See the pyramid.testing API for information about the extra arguments supported by these
functions.

564 Contents
The Pyramid Web Framework, Version 1.9.4

If you also want to make get_current_request() return something other than None during the
course of a single test, you can pass a request object into the pyramid.testing.setUp() within the
setUp method of your test:

1 import unittest
2 from pyramid import testing
3

4 class MyTest(unittest.TestCase):
5 def setUp(self):
6 request = testing.DummyRequest()
7 self.config = testing.setUp(request=request)
8

9 def tearDown(self):
10 testing.tearDown()

If you pass a request object into pyramid.testing.setUp() within your test case’s setUp, any test
method attached to the MyTest test case that directly or indirectly calls get_current_request()
will receive the request object. Otherwise, during testing, get_current_request() will return
None. We use a ”dummy” request implementation supplied by pyramid.testing.DummyRequest
because it’s easier to construct than a ”real” Pyramid request object.

Test setup using a context manager

An alternative style of setting up a test configuration is to use the with statement and pyramid.
testing.testConfig() to create a context manager. The context manager will call pyramid.
testing.setUp() before the code under test and pyramid.testing.tearDown() afterwards.

This style is useful for small self-contained tests. For example:

1 import unittest
2

3 class MyTest(unittest.TestCase):
4

5 def test_my_function(self):
6 from pyramid import testing
7 with testing.testConfig() as config:
8 config.add_route('bar', '/bar/{id}')
9 my_function_which_needs_route_bar()

0.3. Narrative Documentation 565


The Pyramid Web Framework, Version 1.9.4

What?

Thread local data structures are always a bit confusing, especially when they’re used by frameworks.
Sorry. So here’s a rule of thumb: if you don’t know whether you’re calling code that uses the
get_current_registry() or get_current_request() functions, or you don’t care about any
of this, but you still want to write test code, just always call pyramid.testing.setUp() in your test’s
setUp method and pyramid.testing.tearDown() in your tests’ tearDown method. This won’t
really hurt anything if the application you’re testing does not call any get_current* function.

Using the Configurator and pyramid.testing APIs in Unit Tests

The Configurator API and the pyramid.testing module provide a number of functions which
can be used during unit testing. These functions make configuration declaration calls to the current ap-
plication registry, but typically register a ”stub” or ”dummy” feature in place of the ”real” feature that the
code would call if it was being run normally.

For example, let’s imagine you want to unit test a Pyramid view function.

1 from pyramid.httpexceptions import HTTPForbidden


2

3 def view_fn(request):
4 if request.has_permission('edit'):
5 raise HTTPForbidden
6 return {'greeting':'hello'}

This code implies that you have defined a renderer imperatively in a relevant pyramid.config.
Configurator instance, otherwise it would fail when run normally.

Without doing anything special during a unit test, the call to has_permission() in this view func-
tion will always return a True value. When a Pyramid application starts normally, it will populate an
application registry using configuration declaration calls made against a Configurator. But if this ap-
plication registry is not created and populated (e.g., by initializing the configurator with an authorization
policy), like when you invoke application code via a unit test, Pyramid API functions will tend to either
fail or return default results. So how do you test the branch of the code in this view function that raises
HTTPForbidden?

The testing API provided by Pyramid allows you to simulate various application registry registrations for
use under a unit testing framework without needing to invoke the actual application configuration implied
by its main function. For example, if you wanted to test the above view_fn (assuming it lived in the
package named my.package), you could write a unittest.TestCase that used the testing API.

566 Contents
The Pyramid Web Framework, Version 1.9.4

1 import unittest
2 from pyramid import testing
3

4 class MyTest(unittest.TestCase):
5 def setUp(self):
6 self.config = testing.setUp()
7

8 def tearDown(self):
9 testing.tearDown()
10

11 def test_view_fn_forbidden(self):
12 from pyramid.httpexceptions import HTTPForbidden
13 from my.package import view_fn
14 self.config.testing_securitypolicy(userid='hank',
15 permissive=False)
16 request = testing.DummyRequest()
17 request.context = testing.DummyResource()
18 self.assertRaises(HTTPForbidden, view_fn, request)
19

20 def test_view_fn_allowed(self):
21 from my.package import view_fn
22 self.config.testing_securitypolicy(userid='hank',
23 permissive=True)
24 request = testing.DummyRequest()
25 request.context = testing.DummyResource()
26 response = view_fn(request)
27 self.assertEqual(response, {'greeting':'hello'})

In the above example, we create a MyTest test case that inherits from unittest.TestCase. If it’s in
our Pyramid application, it will be found when py.test is run. It has two test methods.

The first test method, test_view_fn_forbidden tests the view_fn when the authentication policy
forbids the current user the edit permission. Its third line registers a ”dummy” ”non-permissive” autho-
rization policy using the testing_securitypolicy() method, which is a special helper method
for unit testing.

We then create a pyramid.testing.DummyRequest object which simulates a WebOb request object


API. A pyramid.testing.DummyRequest is a request object that requires less setup than a ”real”
Pyramid request. We call the function being tested with the manufactured request. When the function is
called, pyramid.request.Request.has_permission() will call the ”dummy” authentication
policy we’ve registered through testing_securitypolicy(), which denies access. We check that
the view function raises a HTTPForbidden error.

0.3. Narrative Documentation 567


The Pyramid Web Framework, Version 1.9.4

The second test method, named test_view_fn_allowed, tests the alternate case, where the authen-
tication policy allows access. Notice that we pass different values to testing_securitypolicy()
to obtain this result. We assert at the end of this that the view function returns a value.

Note that the test calls the pyramid.testing.setUp() function in its setUp method and the
pyramid.testing.tearDown() function in its tearDown method. We assign the result of
pyramid.testing.setUp() as config on the unittest class. This is a Configurator object and all
methods of the configurator can be called as necessary within tests. If you use any of the Configurator
APIs during testing, be sure to use this pattern in your test case’s setUp and tearDown; these methods
make sure you’re using a ”fresh” application registry per test run.

See the pyramid.testing chapter for the entire Pyramid-specific testing API. This chapter describes APIs
for registering a security policy, registering resources at paths, registering event listeners, registering views
and view permissions, and classes representing ”dummy” implementations of a request and a resource.

See also:

See also the various methods of the Configurator documented in pyramid.config that begin with the
testing_ prefix.

Creating Integration Tests

In Pyramid, a unit test typically relies on ”mock” or ”dummy” implementations to give the code under test
enough context to run.

”Integration testing” implies another sort of testing. In the context of a Pyramid integration test, the test
logic exercises the functionality of the code under test and its integration with the rest of the Pyramid
framework.

Creating an integration test for a Pyramid application usually means invoking the application’s
includeme function via pyramid.config.Configurator.include() within the test’s setup
code. This causes the entire Pyramid environment to be set up, simulating what happens when your appli-
cation is run ”for real”. This is a heavy-hammer way of making sure that your tests have enough context
to run properly, and tests your code’s integration with the rest of Pyramid.

See also:

See also Including Configuration from External Sources

Writing unit tests that use the Configurator API to set up the right ”mock” registrations is often
preferred to creating integration tests. Unit tests will run faster (because they do less for each test) and are
usually easier to reason about.

568 Contents
The Pyramid Web Framework, Version 1.9.4

Creating Functional Tests

Functional tests test your literal application.

In Pyramid, functional tests are typically written using the WebTest package, which provides APIs for
invoking HTTP(S) requests to your application. We also like py.test and pytest-cov to provide
simple testing and coverage reports.

Regardless of which testing package you use, be sure to add a tests_require dependency on that
package to your application’s setup.py file. Using the project myproject generated by the starter
cookiecutter as described in Creating a Pyramid Project, we would insert the following code immediately
following the requires block in the file myproject/setup.py.

11 requires = [
12 'plaster_pastedeploy',
13 'pyramid',
14 'pyramid_jinja2',
15 'pyramid_debugtoolbar',
16 'waitress',
17 ]
18

19 tests_require = [
20 'WebTest >= 1.3.1', # py3 compat
21 'pytest',
22 'pytest-cov',
23 ]

Remember to change the dependency.

42 zip_safe=False,
43 extras_require={
44 'testing': tests_require,
45 },
46 install_requires=requires,

As always, whenever you change your dependencies, make sure to run the correct pip install -e
command.

$VENV/bin/pip install -e ".[testing]"

0.3. Narrative Documentation 569


The Pyramid Web Framework, Version 1.9.4

In your MyPackage project, your package is named myproject which contains a views module,
which in turn contains a view function my_view that returns an HTML body when the root URL is
invoked:

1 from pyramid.view import view_config


2

4 @view_config(route_name='home', renderer='templates/
,→mytemplate.jinja2')

5 def my_view(request):
6 return {'project': 'MyProject'}

The following example functional test demonstrates invoking the above view:

1 class FunctionalTests(unittest.TestCase):
2 def setUp(self):
3 from myproject import main
4 app = main({})
5 from webtest import TestApp
6 self.testapp = TestApp(app)
7

8 def test_root(self):
9 res = self.testapp.get('/', status=200)
10 self.assertTrue(b'Pyramid' in res.body)

When this test is run, each test method creates a ”real” WSGI application using the main function in your
myproject.__init__ module, using WebTest to wrap that WSGI application. It assigns the result
to self.testapp. In the test named test_root, the TestApp’s GET method is used to invoke the
root URL. Finally, an assertion is made that the returned HTML contains the text Pyramid.

See the WebTest documentation for further information about the methods available to a webtest.app.
TestApp instance.

0.3.24 Resources

A resource is an object that represents a ”place” in a tree related to your application. Every Pyramid
application has at least one resource object: the root resource. Even if you don’t define a root resource
manually, a default one is created for you. The root resource is the root of a resource tree. A resource tree
is a set of nested dictionary-like objects which you can use to represent your website’s structure.

570 Contents
The Pyramid Web Framework, Version 1.9.4

In an application which uses traversal to map URLs to code, the resource tree structure is used heavily to
map each URL to a view callable. When traversal is used, Pyramid will walk through the resource tree
by traversing through its nested dictionary structure in order to find a context resource. Once a context
resource is found, the context resource and data in the request will be used to find a view callable.
In an application which uses URL dispatch, the resource tree is only used indirectly, and is often ”invisible”
to the developer. In URL dispatch applications, the resource ”tree” is often composed of only the root
resource by itself. This root resource sometimes has security declarations attached to it, but is not required
to have any. In general, the resource tree is much less important in applications that use URL dispatch than
applications that use traversal.
In ”Zope-like” Pyramid applications, resource objects also often store data persistently, and offer methods
related to mutating that persistent data. In these kinds of applications, resources not only represent the site
structure of your website, but they become the domain model of the application.
Also:
• The context and containment predicate arguments to add_view() (or a
view_config() decorator) reference a resource class or resource interface.
• A root factory returns a resource.
• A resource is exposed to view code as the context of a view.
• Various helpful Pyramid API methods expect a resource as an argument (e.g., resource_url()
and others).

Defining a Resource Tree

When traversal is used (as opposed to a purely URL dispatch based application), Pyramid expects to be
able to traverse a tree composed of resources (the resource tree). Traversal begins at a root resource, and
descends into the tree recursively, trying each resource’s __getitem__ method to resolve a path segment
to another resource object. Pyramid imposes the following policy on resource instances in the tree:
• A container resource (a resource which contains other resources) must supply a __getitem__
method which is willing to resolve a Unicode name to a sub-resource. If a sub-resource by a particular
name does not exist in a container resource, the __getitem__ method of the container resource
must raise a KeyError. If a sub-resource by that name does exist, the container’s __getitem__
should return the sub-resource.
• Leaf resources, which do not contain other resources, must not implement a __getitem__, or if
they do, their __getitem__ method must always raise a KeyError.
See Traversal for more information about how traversal works against resource instances.
Here’s a sample resource tree, represented by a variable named root:

0.3. Narrative Documentation 571


The Pyramid Web Framework, Version 1.9.4

1 class Resource(dict):
2 pass
3

4 root = Resource({'a':Resource({'b':Resource({'c':Resource()})})})

The resource tree we’ve created above is represented by a dictionary-like root object which has a single
child named 'a'. 'a' has a single child named 'b', and 'b' has a single child named 'c', which has
no children. It is therefore possible to access the 'c' leaf resource like so:

1 root['a']['b']['c']

If you returned the above root object from a root factory, the path /a/b/c would find the 'c' object
in the resource tree as the result of traversal.

In this example, each of the resources in the tree is of the same class. This is not a requirement. Resource
elements in the tree can be of any type. We used a single class to represent all resources in the tree for the
sake of simplicity, but in a ”real” app, the resources in the tree can be arbitrary.

Although the example tree above can service a traversal, the resource instances in the above example are
not aware of location, so their utility in a ”real” application is limited. To make best use of built-in Pyramid
API facilities, your resources should be ”location-aware”. The next section details how to make resources
location-aware.

Location-Aware Resources

In order for certain Pyramid location, security, URL-generation, and traversal APIs to work properly against
the resources in a resource tree, all resources in the tree must be location-aware. This means they must
have two attributes: __parent__ and __name__.

The __parent__ attribute of a location-aware resource should be a reference to the resource’s parent
resource instance in the tree. The __name__ attribute should be the name with which a resource’s parent
refers to the resource via __getitem__.

The __parent__ of the root resource should be None and its __name__ should be the empty string.
For instance:

1 class MyRootResource(object):
2 __name__ = ''
3 __parent__ = None

572 Contents
The Pyramid Web Framework, Version 1.9.4

A resource returned from the root resource’s __getitem__ method should have a __parent__ at-
tribute that is a reference to the root resource, and its __name__ attribute should match the name by
which it is reachable via the root resource’s __getitem__. A container resource within the root re-
source should have a __getitem__ that returns resources with a __parent__ attribute that points at
the container, and these sub-objects should have a __name__ attribute that matches the name by which
they are retrieved from the container via __getitem__. This pattern continues recursively ”up” the tree
from the root.

The __parent__ attributes of each resource form a linked list that points ”downwards” toward the root.
This is analogous to the .. entry in filesystem directories. If you follow the __parent__ values from any
resource in the resource tree, you will eventually come to the root resource, just like if you keep executing
the cd .. filesystem command, eventually you will reach the filesystem root directory.

If your root resource has a __name__ argument that is not None or the empty string, URLs
returned by the resource_url() function, and paths generated by the resource_path() and
resource_path_tuple() APIs, will be generated improperly. The value of __name__ will
be prepended to every path and URL generated (as opposed to a single leading slash or empty tuple
element).

For your convenience

If you’d rather not manage the __name__ and __parent__ attributes of your resources ”by hand”,
an add-on package named pyramid_traversalwrapper can help.

In order to use this helper feature, you must first install the pyramid_traversalwrapper package
(available via PyPI), then register its ModelGraphTraverser as the traversal policy, rather than the
default Pyramid traverser. The package contains instructions for doing so.

Once Pyramid is configured with this feature, you will no longer need to manage the __parent__ and
__name__ attributes on resource objects ”by hand”. Instead, as necessary during traversal, Pyramid
will wrap each resource (even the root resource) in a LocationProxy, which will dynamically assign
a __name__ and a __parent__ to the traversed resource, based on the last traversed resource and
the name supplied to __getitem__. The root resource will have a __name__ attribute of None
and a __parent__ attribute of None.

Applications which use tree-walking Pyramid APIs require location-aware resources.


These APIs include (but are not limited to) resource_url(), find_resource(),
find_root(), find_interface(), resource_path(), resource_path_tuple(),

0.3. Narrative Documentation 573


The Pyramid Web Framework, Version 1.9.4

traverse(), virtual_root(), and (usually) has_permission() and


principals_allowed_by_permission().

In general, since so much Pyramid infrastructure depends on location-aware resources, it’s a good idea to
make each resource in your tree location-aware.

Generating the URL of a Resource

If your resources are location-aware, you can use the pyramid.request.Request.


resource_url() API to generate a URL for the resource. This URL will use the resource’s
position in the parent tree to create a resource path, and it will prefix the path with the current application
URL to form a fully-qualified URL with the scheme, host, port, and path. You can also pass extra
arguments to resource_url() to influence the generated URL.

The simplest call to resource_url() looks like this:

1 url = request.resource_url(resource)

The request in the above example is an instance of a Pyramid request object.

If the resource referred to as resource in the above example was the root resource, and the host that
was used to contact the server was example.com, the URL generated would be http://example.
com/. However, if the resource was a child of the root resource named a, the generated URL would be
http://example.com/a/.

A slash is appended to all resource URLs when resource_url() is used to generate them in this simple
manner, because resources are ”places” in the hierarchy, and URLs are meant to be clicked on to be visited.
Relative URLs that you include on HTML pages rendered as the result of the default view of a resource
are more apt to be relative to these resources than relative to their parent.

You can also pass extra elements to resource_url():

1 url = request.resource_url(resource, 'foo', 'bar')

If the resource referred to as resource in the above example was the root resource, and the host that
was used to contact the server was example.com, the URL generated would be http://example.
com/foo/bar. Any number of extra elements can be passed to resource_url() as extra positional
arguments. When extra elements are passed, they are appended to the resource’s URL. A slash is not
appended to the final segment when elements are passed.

You can also pass a query string:

574 Contents
The Pyramid Web Framework, Version 1.9.4

1 url = request.resource_url(resource, query={'a':'1'})

If the resource referred to as resource in the above example was the root resource, and the host that
was used to contact the server was example.com, the URL generated would be http://example.
com/?a=1.

When a virtual root is active, the URL generated by resource_url() for a resource may be ”shorter”
than its physical tree path. See Virtual Root Support for more information about virtually rooting a re-
source.

For more information about generating resource URLs, see the documentation for pyramid.request.
Request.resource_url().

Overriding Resource URL Generation

If a resource object implements a __resource_url__ method, this method will be called when
resource_url() is called to generate a URL for the resource, overriding the default URL returned
for the resource by resource_url().

The __resource_url__ hook is passed two arguments: request and info. request is the re-
quest object passed to resource_url(). info is a dictionary with the following keys:

physical_path A string representing the ”physical path” computed for the resource, as defined by
pyramid.traversal.resource_path(resource). It will begin and end with a slash.

virtual_path A string representing the ”virtual path” computed for the resource, as defined by Virtual
Root Support. This will be identical to the physical path if virtual rooting is not enabled. It will begin
and end with a slash.

app_url A string representing the application URL generated during request.resource_url. It


will not end with a slash. It represents a potentially customized URL prefix, containing potentially
custom scheme, host and port information passed by the user to request.resource_url. It
should be preferred over use of request.application_url.

The __resource_url__ method of a resource should return a string representing a URL. If it cannot
override the default, it should return None. If it returns None, the default URL will be returned.

Here’s an example __resource_url__ method.

0.3. Narrative Documentation 575


The Pyramid Web Framework, Version 1.9.4

1 class Resource(object):
2 def __resource_url__(self, request, info):
3 return info['app_url'] + info['virtual_path']

The above example actually just generates and returns the default URL, which would have been what
was generated by the default resource_url machinery, but your code can perform arbitrary logic as
necessary. For example, your code may wish to override the hostname or port number of the generated
URL.

Note that the URL generated by __resource_url__ should be fully qualified, should end in a
slash, and should not contain any query string or anchor elements (only path elements) to work with
resource_url().

Generating the Path To a Resource

pyramid.traversal.resource_path() returns a string object representing the absolute physical


path of the resource object based on its position in the resource tree. Each segment of the path is separated
with a slash character.

1 from pyramid.traversal import resource_path


2 url = resource_path(resource)

If resource in the example above was accessible in the tree as root['a']['b'], the above example
would generate the string /a/b.

Any positional arguments passed in to resource_path() will be appended as path segments to the
end of the resource path.

1 from pyramid.traversal import resource_path


2 url = resource_path(resource, 'foo', 'bar')

If resource in the example above was accessible in the tree as root['a']['b'], the above example
would generate the string /a/b/foo/bar.

The resource passed in must be location-aware.

The presence or absence of a virtual root has no impact on the behavior of resource_path().

576 Contents
The Pyramid Web Framework, Version 1.9.4

Finding a Resource by Path

If you have a string path to a resource, you can grab the resource from that place in the application’s
resource tree using pyramid.traversal.find_resource().

You can resolve an absolute path by passing a string prefixed with a / as the path argument:

1 from pyramid.traversal import find_resource


2 url = find_resource(anyresource, '/path')

Or you can resolve a path relative to the resource that you pass in to pyramid.traversal.
find_resource() by passing a string that isn’t prefixed by /:

1 from pyramid.traversal import find_resource


2 url = find_resource(anyresource, 'path')

Often the paths you pass to find_resource() are generated by the resource_path() API. These
APIs are ”mirrors” of each other.

If the path cannot be resolved when calling find_resource() (if the respective resource in the tree
does not exist), a KeyError will be raised.

See the pyramid.traversal.find_resource() documentation for more information about re-


solving a path to a resource.

Obtaining the Lineage of a Resource

pyramid.location.lineage() returns a generator representing the lineage of the location-aware


resource object.

The lineage() function returns the resource that is passed into it, then each parent of the resource in
order. For example, if the resource tree is composed like so:

1 class Thing(object): pass


2

3 thing1 = Thing()
4 thing2 = Thing()
5 thing2.__parent__ = thing1

Calling lineage(thing2) will return a generator. When we turn it into a list, we will get:

0.3. Narrative Documentation 577


The Pyramid Web Framework, Version 1.9.4

1 list(lineage(thing2))
2 [ <Thing object at thing2>, <Thing object at thing1> ]

The generator returned by lineage() first returns unconditionally the resource that was passed into
it. Then, if the resource supplied a __parent__ attribute, it returns the resource represented by
resource.__parent__. If that resource has a __parent__ attribute, it will return that resource’s
parent, and so on, until the resource being inspected either has no __parent__ attribute or has a
__parent__ attribute of None.

See the documentation for pyramid.location.lineage() for more information.

Determining if a Resource is in the Lineage of Another Resource

Use the pyramid.location.inside() function to determine if one resource is in the lineage of


another resource.

For example, if the resource tree is:

1 class Thing(object): pass


2

3 a = Thing()
4 b = Thing()
5 b.__parent__ = a

Calling inside(b, a) will return True, because b has a lineage that includes a. However, calling
inside(a, b) will return False because a does not have a lineage that includes b.

The argument list for inside() is (resource1, resource2). resource1 is ”inside”


resource2 if resource2 is a lineage ancestor of resource1. It is a lineage ancestor if its par-
ent (or one of its parent’s parents, etc.) is an ancestor.

See pyramid.location.inside() for more information.

Finding the Root Resource

Use the pyramid.traversal.find_root() API to find the root resource. The root resource is
the resource at the root of the resource tree. The API accepts a single argument: resource. This is a
resource that is location-aware. It can be any resource in the tree for which you want to find the root.

For example, if the resource tree is:

578 Contents
The Pyramid Web Framework, Version 1.9.4

1 class Thing(object): pass


2

3 a = Thing()
4 b = Thing()
5 b.__parent__ = a

Calling find_root(b) will return a.

The root resource is also available as request.root within view callable code.

The presence or absence of a virtual root has no impact on the behavior of find_root(). The root
object returned is always the physical root object.

Resources Which Implement Interfaces

Resources can optionally be made to implement an interface. An interface is used to tag a resource object
with a ”type” that later can be referred to within view configuration and by pyramid.traversal.
find_interface().

Specifying an interface instead of a class as the context or containment predicate arguments within
view configuration statements makes it possible to use a single view callable for more than one class of
resource objects. If your application is simple enough that you see no reason to want to do this, you can
skip reading this section of the chapter.

For example, here’s some code which describes a blog entry which also declares that the blog entry im-
plements an interface.

1 import datetime
2 from zope.interface import implementer
3 from zope.interface import Interface
4

5 class IBlogEntry(Interface):
6 pass
7

8 @implementer(IBlogEntry)
9 class BlogEntry(object):
10 def __init__(self, title, body, author):
11 self.title = title
12 self.body = body
13 self.author = author
14 self.created = datetime.datetime.now()

0.3. Narrative Documentation 579


The Pyramid Web Framework, Version 1.9.4

This resource consists of two things: the class which defines the resource constructor as the class
BlogEntry, and an interface attached to the class via an implementer class decorator using the
IBlogEntry interface as its sole argument.

The interface object used must be an instance of a class that inherits from zope.interface.
Interface.

A resource class may implement zero or more interfaces. You specify that a resource implements an
interface by using the zope.interface.implementer() function as a class decorator. The above
BlogEntry resource implements the IBlogEntry interface.

You can also specify that a particular resource instance provides an interface as opposed to its class. When
you declare that a class implements an interface, all instances of that class will also provide that interface.
However, you can also just say that a single object provides the interface. To do so, use the zope.
interface.directlyProvides() function:

1 import datetime
2 from zope.interface import directlyProvides
3 from zope.interface import Interface
4

5 class IBlogEntry(Interface):
6 pass
7

8 class BlogEntry(object):
9 def __init__(self, title, body, author):
10 self.title = title
11 self.body = body
12 self.author = author
13 self.created = datetime.datetime.now()
14

15 entry = BlogEntry('title', 'body', 'author')


16 directlyProvides(entry, IBlogEntry)

zope.interface.directlyProvides() will replace any existing interface that was previously


provided by an instance. If a resource object already has instance-level interface declarations that you
don’t want to replace, use the zope.interface.alsoProvides() function:

1 import datetime
2 from zope.interface import alsoProvides
3 from zope.interface import directlyProvides
4 from zope.interface import Interface
5

(continues on next page)

580 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


6 class IBlogEntry1(Interface):
7 pass
8

9 class IBlogEntry2(Interface):
10 pass
11

12 class BlogEntry(object):
13 def __init__(self, title, body, author):
14 self.title = title
15 self.body = body
16 self.author = author
17 self.created = datetime.datetime.now()
18

19 entry = BlogEntry('title', 'body', 'author')


20 directlyProvides(entry, IBlogEntry1)
21 alsoProvides(entry, IBlogEntry2)

zope.interface.alsoProvides() will augment the set of interfaces directly provided by an in-


stance instead of overwriting them like zope.interface.directlyProvides() does.

For more information about how resource interfaces can be used by view configuration, see Using Resource
Interfaces in View Configuration.

Finding a Resource with a Class or Interface in Lineage

Use the find_interface() API to locate a parent that is of a particular Python class, or which im-
plements some interface.

For example, if your resource tree is composed as follows:

1 class Thing1(object): pass


2 class Thing2(object): pass
3

4 a = Thing1()
5 b = Thing2()
6 b.__parent__ = a

0.3. Narrative Documentation 581


The Pyramid Web Framework, Version 1.9.4

Calling find_interface(a, Thing1) will return the a resource because a is of class Thing1 (the
resource passed as the first argument is considered first, and is returned if the class or interface specification
matches).

Calling find_interface(b, Thing1) will return the a resource because a is of class Thing1 and
a is the first resource in b’s lineage of this class.

Calling find_interface(b, Thing2) will return the b resource.

The second argument to find_interface may also be a interface instead of a class. If it is an interface,
each resource in the lineage is checked to see if the resource implements the specificed interface (instead
of seeing if the resource is of a class).

See also:

See also Resources Which Implement Interfaces.

Pyramid API Functions That Act Against Resources

A resource object is used as the context provided to a view. See Traversal and URL Dispatch for more
information about how a resource object becomes the context.

The APIs provided by pyramid.traversal are used against resource objects. These functions can be used to
find the ”path” of a resource, the root resource in a resource tree, or to generate a URL for a resource.

The APIs provided by pyramid.location are used against resources. These can be used to walk down a
resource tree, or conveniently locate one resource ”inside” another.

Some APIs on the pyramid.request.Request accept a resource object as a parameter. For example,
the has_permission() API accepts a resource object as one of its arguments; the ACL is obtained
from this resource or one of its ancestors. Other security related APIs on the pyramid.request.
Request class also accept context as an argument, and a context is always a resource.

0.3.25 Hello Traversal World

Traversal is an alternative to URL dispatch which allows Pyramid applications to map URLs to code.

If code speaks louder than words, maybe this will help. Here is a single-file Pyramid application that uses
traversal:

582 Contents
The Pyramid Web Framework, Version 1.9.4

1 from wsgiref.simple_server import make_server


2 from pyramid.config import Configurator
3 from pyramid.response import Response
4

5 class Resource(dict):
6 pass
7

8 def get_root(request):
9 return Resource({'a': Resource({'b': Resource({'c': Resource()}
,→)})})

10

11 def hello_world_of_resources(context, request):


12 output = "Here's a resource and its children: %s" % context
13 return Response(output)
14

15 if __name__ == '__main__':
16 config = Configurator(root_factory=get_root)
17 config.add_view(hello_world_of_resources, context=Resource)
18 app = config.make_wsgi_app()
19 server = make_server('0.0.0.0', 8080, app)
20 server.serve_forever()
21

22

You may notice that this application is intentionally very similar to the ”hello world” application from
Creating Your First Pyramid Application.

On lines 5-6, we create a trivial resource class that’s just a dictionary subclass.

On lines 8-9, we hard-code a resource tree in our root factory function.

On lines 11-13, we define a single view callable that can display a single instance of our Resource class,
passed as the context argument.

The rest of the file sets up and serves our Pyramid WSGI app. Line 18 is where our view gets configured
for use whenever the traversal ends with an instance of our Resource class.

Interestingly, there are no URLs explicitly configured in this application. Instead, the URL space is defined
entirely by the keys in the resource tree.

0.3. Narrative Documentation 583


The Pyramid Web Framework, Version 1.9.4

Example requests

If this example is running on http://localhost:8080, and the user browses to http://localhost:8080/a/b, Pyra-
mid will call get_root(request) to get the root resource, then traverse the tree from there by key;
starting from the root, it will find the child with key "a", then its child with key "b"; then use that as the
context argument for calling hello_world_of_resources.

Or, if the user browses to http://localhost:8080/, Pyramid will stop at the root—the outermost Resource
instance, in this case—and use that as the context argument to the same view.

Or, if the user browses to a key that doesn’t exist in this resource tree, like http://localhost:8080/xyz or
http://localhost:8080/a/b/c/d, the traversal will end by raising a KeyError, and Pyramid will turn that into
a 404 HTTP response.

A more complicated application could have many types of resources, with different view callables defined
for each type, and even multiple views for each type.

See also:

Full technical details may be found in Traversal.

For more about why you might use traversal, see Much Ado About Traversal.

0.3.26 Much Ado About Traversal

(Or, why you should care about it.)

This chapter was adapted, with permission, from a blog post by Rob Miller.

Traversal is an alternative to URL dispatch which allows Pyramid applications to map URLs to code.

Ex-Zope users who are already familiar with traversal and view lookup conceptually may want to
skip directly to the Traversal chapter, which discusses technical details. This chapter is mostly aimed at
people who have previous Pylons experience or experience in another framework which does not provide
traversal, and need an introduction to the ”why” of traversal.

584 Contents
The Pyramid Web Framework, Version 1.9.4

Some folks who have been using Pylons and its Routes-based URL matching for a long time are being
exposed for the first time, via Pyramid, to new ideas such as ”traversal” and ”view lookup” as a way to
route incoming HTTP requests to callable code. Some of the same folks believe that traversal is hard to
understand. Others question its usefulness; URL matching has worked for them so far, so why should they
even consider dealing with another approach, one which doesn’t fit their brain and which doesn’t provide
any immediately obvious value?

You can be assured that if you don’t want to understand traversal, you don’t have to. You can happily build
Pyramid applications with only URL dispatch. However, there are some straightforward, real-world use
cases that are much more easily served by a traversal-based approach than by a pattern-matching mecha-
nism. Even if you haven’t yet hit one of these use cases yourself, understanding these new ideas is worth
the effort for any web developer so you know when you might want to use them. Traversal is actually a
straightforward metaphor easily comprehended by anyone who’s ever used a run-of-the-mill file system
with folders and files.

URL Dispatch

Let’s step back and consider the problem we’re trying to solve. An HTTP request for a particular path
has been routed to our web application. The requested path will possibly invoke a specific view callable
function defined somewhere in our app. We’re trying to determine which callable function, if any, should
be invoked for a given requested URL.

Many systems, including Pyramid, offer a simple solution. They offer the concept of ”URL matching”.
URL matching approaches this problem by parsing the URL path and comparing the results to a set of
registered ”patterns”, defined by a set of regular expressions or some other URL path templating syntax.
Each pattern is mapped to a callable function somewhere; if the request path matches a specific pattern, the
associated function is called. If the request path matches more than one pattern, some conflict resolution
scheme is used, usually a simple order precedence so that the first match will take priority over any subse-
quent matches. If a request path doesn’t match any of the defined patterns, a ”404 Not Found” response is
returned.

In Pyramid, we offer an implementation of URL matching which we call URL dispatch. Using Pyra-
mid syntax, we might have a match pattern such as /{userid}/photos/{photoid}, mapped to
a photo_view() function defined somewhere in our code. Then a request for a path such as /
joeschmoe/photos/photo1 would be a match, and the photo_view() function would be in-
voked to handle the request. Similarly, /{userid}/blog/{year}/{month}/{postid} might
map to a blog_post_view() function, so /joeschmoe/blog/2010/12/urlmatching would
trigger the function, which presumably would know how to find and render the urlmatching blog post.

0.3. Narrative Documentation 585


The Pyramid Web Framework, Version 1.9.4

Historical Refresher

Now that we’ve refreshed our understanding of URL dispatch, we’ll dig in to the idea of traversal. Before
we do, though, let’s take a trip down memory lane. If you’ve been doing web work for a while, you
may remember a time when we didn’t have fancy web frameworks like Pylons and Pyramid. Instead, we
had general purpose HTTP servers that primarily served files off of a file system. The ”root” of a given
site mapped to a particular folder somewhere on the file system. Each segment of the request URL path
represented a subdirectory. The final path segment would be either a directory or a file, and once the server
found the right file it would package it up in an HTTP response and send it back to the client. So serving
up a request for /joeschmoe/photos/photo1 literally meant that there was a joeschmoe folder
somewhere, which contained a photos folder, which in turn contained a photo1 file. If at any point
along the way we find that there is not a folder or file matching the requested path, we return a 404 response.

As the web grew more dynamic, however, a little bit of extra complexity was added. Technologies such as
CGI and HTTP server modules were developed. Files were still looked up on the file system, but if the file
ended with (for example) .cgi or .php, or if it lived in a special folder, instead of simply sending the
file to the client the server would read the file, execute it using an interpreter of some sort, and then send
the output from this process to the client as the final result. The server configuration specified which files
would trigger some dynamic code, with the default case being to just serve the static file.

Traversal (a.k.a., Resource Location)

Believe it or not, if you understand how serving files from a file system works, you understand traversal.
And if you understand that a server might do something different based on what type of file a given request
specifies, then you understand view lookup.

The major difference between file system lookup and traversal is that a file system lookup steps through
nested directories and files in a file system tree, while traversal steps through nested dictionary-type objects
in a resource tree. Let’s take a detailed look at one of our example paths, so we can see what I mean.

The path /joeschmoe/photos/photo1, has four segments: /, joeschmoe, photos and


photo1. With file system lookup we might have a root folder (/) containing a nested folder
(joeschmoe), which contains another nested folder (photos), which finally contains a JPG file
(photo1). With traversal, we instead have a dictionary-like root object. Asking for the joeschmoe key
gives us another dictionary-like object. Asking in turn for the photos key gives us yet another mapping
object, which finally (hopefully) contains the resource that we’re looking for within its values, referenced
by the photo1 key.

In pure Python terms, then, the traversal or ”resource location” portion of satisfying the /joeschmoe/
photos/photo1 request will look something like this pseudocode:

586 Contents
The Pyramid Web Framework, Version 1.9.4

get_root()['joeschmoe']['photos']['photo1']

get_root() is some function that returns a root traversal resource. If all of the specified keys exist, then
the returned object will be the resource that is being requested, analogous to the JPG file that was retrieved
in the file system example. If a KeyError is generated anywhere along the way, Pyramid will return 404.
(This isn’t precisely true, as you’ll see when we learn about view lookup below, but the basic idea holds.)

What Is a ”Resource”?

”Files on a file system I understand”, you might say. ”But what are these nested dictionary things? Where
do these objects, these ’resources’, live? What are they?”
Since Pyramid is not a highly opinionated framework, it makes no restriction on how a resource is im-
plemented; a developer can implement them as they wish. One common pattern used is to persist all
of the resources, including the root, in a database as a graph. The root object is a dictionary-like ob-
ject. Dictionary-like objects in Python supply a __getitem__ method which is called when key lookup
is done. Under the hood, when adict is a dictionary-like object, Python translates adict['a'] to
adict.__getitem__('a'). Try doing this in a Python interpreter prompt if you don’t believe us:

>>> adict = {}
>>> adict['a'] = 1
>>> adict['a']
1
>>> adict.__getitem__('a')
1

The dictionary-like root object stores the ids of all of its subresources as keys, and provides a
__getitem__ implementation that fetches them. So get_root() fetches the unique root object,
while get_root()['joeschmoe'] returns a different object, also stored in the database, which in
turn has its own subresources and __getitem__ implementation, and so on. These resources might be
persisted in a relational database, one of the many ”NoSQL” solutions that are becoming popular these
days, or anywhere else; it doesn’t matter. As long as the returned objects provide the dictionary-like API
(i.e., as long as they have an appropriately implemented __getitem__ method), then traversal will work.
In fact, you don’t need a ”database” at all. You could use plain dictionaries, with your site’s URL struc-
ture hard-coded directly in the Python source. Or you could trivially implement a set of objects with
__getitem__ methods that search for files in specific directories, and thus precisely recreate the tradi-
tional mechanism of having the URL path mapped directly to a folder structure on the file system. Traversal
is in fact a superset of file system lookup.

See the chapter entitled Resources for a more technical overview of resources.

0.3. Narrative Documentation 587


The Pyramid Web Framework, Version 1.9.4

View Lookup

At this point we’re nearly there. We’ve covered traversal, which is the process by which a specific resource
is retrieved according to a specific URL path. But what is ”view lookup”?

The need for view lookup is simple: there is more than one possible action that you might want to take
after finding a resource. With our photo example, for instance, you might want to view the photo in a
page, but you might also want to provide a way for the user to edit the photo and any associated metadata.
We’ll call the former the view view, and the latter will be the edit view. (Original, I know.) Pyramid
has a centralized view application registry where named views can be associated with specific resource
types. So in our example, we’ll assume that we’ve registered view and edit views for photo objects, and
that we’ve specified the view view as the default, so that /joeschmoe/photos/photo1/view and
/joeschmoe/photos/photo1 are equivalent. The edit view would sensibly be provided by a request
for /joeschmoe/photos/photo1/edit.

Hopefully it’s clear that the first portion of the edit view’s URL path is going to re-
solve to the same resource as the non-edit version, specifically the resource returned by
get_root()['joeschmoe']['photos']['photo1']. But traversal ends there; the photo1
resource doesn’t have an edit key. In fact, it might not even be a dictionary-like object, in which case
photo1['edit'] would be meaningless. When the Pyramid resource location has been resolved to
a leaf resource, but the entire request path has not yet been expended, the very next path segment is
treated as a view name. The registry is then checked to see if a view of the given name has been specified
for a resource of the given type. If so, the view callable is invoked, with the resource passed in as the
related context object (also available as request.context). If a view callable could not be found,
Pyramid will return a ”404 Not Found” response.

You might conceptualize a request for /joeschmoe/photos/photo1/edit as ultimately converted


into the following piece of Pythonic pseudocode:

context = get_root()['joeschmoe']['photos']['photo1']
view_callable = get_view(context, 'edit')
request.context = context
view_callable(request)

The get_root and get_view functions don’t really exist. Internally, Pyramid does something more
complicated. But the example above is a reasonable approximation of the view lookup algorithm in pseu-
docode.

588 Contents
The Pyramid Web Framework, Version 1.9.4

Use Cases

Why should we care about traversal? URL matching is easier to explain, and it’s good enough, right?

In some cases, yes, but certainly not in all cases. So far we’ve had very structured URLs, where our paths
have had a specific, small number of pieces, like this:

/{userid}/{typename}/{objectid}[/{view_name}]

In all of the examples thus far, we’ve hard coded the typename value, assuming that we’d know at de-
velopment time what names were going to be used (”photos”, ”blog”, etc.). But what if we don’t know
what these names will be? Or, worse yet, what if we don’t know anything about the structure of the URLs
inside a user’s folder? We could be writing a CMS where we want the end user to be able to arbitrarily add
content and other folders inside his folder. He might decide to nest folders dozens of layers deep. How
will you construct matching patterns that could account for every possible combination of paths that might
develop?

It might be possible, but it certainly won’t be easy. The matching patterns are going to become complex
quickly as you try to handle all of the edge cases.

With traversal, however, it’s straightforward. Twenty layers of nesting would be no problem. Pyramid
will happily call __getitem__ as many times as it needs to, until it runs out of path segments or until
a resource raises a KeyError. Each resource only needs to know how to fetch its immediate children,
and the traversal algorithm takes care of the rest. Also, since the structure of the resource tree can live
in the database and not in the code, it’s simple to let users modify the tree at runtime to set up their own
personalized ”directory” structures.

Another use case in which traversal shines is when there is a need to support a context-dependent secu-
rity policy. One example might be a document management infrastructure for a large corporation, where
members of different departments have varying access levels to the various other departments’ files. Rea-
sonably, even specific files might need to be made available to specific individuals. Traversal does well
here if your resources actually represent the data objects related to your documents, because the idea of
a resource authorization is baked right into the code resolution and calling process. Resource objects can
store ACLs, which can be inherited and/or overridden by the subresources.

If each resource can thus generate a context-based ACL, then whenever view code is attempting to perform a
sensitive action, it can check against that ACL to see whether the current user should be allowed to perform
the action. In this way you achieve so called ”instance based” or ”row level” security which is considerably
harder to model using a traditional tabular approach. Pyramid actively supports such a scheme, and in fact
if you register your views with guarded permissions and use an authorization policy, Pyramid can check
against a resource’s ACL when deciding whether or not the view itself is available to the current user.

0.3. Narrative Documentation 589


The Pyramid Web Framework, Version 1.9.4

In summary, there are entire classes of problems that are more easily served by traversal and view lookup
than by URL dispatch. If your problems don’t require it, great, stick with URL dispatch. But if you’re
using Pyramid and you ever find that you do need to support one of these use cases, you’ll be glad you
have traversal in your toolkit.

It is even possible to mix and match traversal with URL dispatch in the same Pyramid application.
See the Combining Traversal and URL Dispatch chapter for details.

0.3.27 Traversal

This chapter explains the technical details of how traversal works in Pyramid.

For a quick example, see Hello Traversal World.

For more about why you might use traversal, see Much Ado About Traversal.

A traversal uses the URL (Universal Resource Locator) to find a resource located in a resource tree, which
is a set of nested dictionary-like objects. Traversal is done by using each segment of the path portion of the
URL to navigate through the resource tree. You might think of this as looking up files and directories in
a file system. Traversal walks down the path until it finds a published resource, analogous to a file system
”directory” or ”file”. The resource found as the result of a traversal becomes the context of the request.
Then, the view lookup subsystem is used to find some view code willing to ”publish” this resource by
generating a response.

Using Traversal to map a URL to code is optional. If you’re creating your first Pyramid application, it
probably makes more sense to use URL dispatch to map URLs to code instead of traversal, as new Pyramid
developers tend to find URL dispatch slightly easier to understand. If you use URL dispatch, you needn’t
read this chapter.

Traversal Details

Traversal is dependent on information in a request object. Every request object contains URL path infor-
mation in the PATH_INFO portion of the WSGI environment. The PATH_INFO string is the portion of a
request’s URL following the hostname and port number, but before any query string elements or fragment

590 Contents
The Pyramid Web Framework, Version 1.9.4

element. For example the PATH_INFO portion of the URL http://example.com:8080/a/b/c?


foo=1 is /a/b/c.

Traversal treats the PATH_INFO segment of a URL as a sequence of path segments. For example, the
PATH_INFO string /a/b/c is converted to the sequence ['a', 'b', 'c'].

This path sequence is then used to descend through the resource tree, looking up a resource for each path
segment. Each lookup uses the __getitem__ method of a resource in the tree.

For example, if the path info sequence is ['a', 'b', 'c']:

• Traversal starts by acquiring the root resource of the application by calling the root factory. The
root factory can be configured to return whatever object is appropriate as the traversal root of your
application.

• Next, the first element ('a') is popped from the path segment sequence and is used as a key to
lookup the corresponding resource in the root. This invokes the root resource’s __getitem__
method using that value ('a') as an argument.

• If the root resource ”contains” a resource with key 'a', its __getitem__ method will return it.
The context temporarily becomes the ”A” resource.

• The next segment ('b') is popped from the path sequence, and the ”A” resource’s __getitem__
is called with that value ('b') as an argument; we’ll presume it succeeds.

• The ”A” resource’s __getitem__ returns another resource, which we’ll call ”B”. The context
temporarily becomes the ”B” resource.

Traversal continues until the path segment sequence is exhausted or a path element cannot be resolved to
a resource. In either case, the context resource is the last object that the traversal successfully resolved.
If any resource found during traversal lacks a __getitem__ method, or if its __getitem__ method
raises a KeyError, traversal ends immediately, and that resource becomes the context.

The results of a traversal also include a view name. If traversal ends before the path segment sequence is
exhausted, the view name is the next remaining path segment element. If the traversal expends all of the
path segments, then the view name is the empty string ('').

The combination of the context resource and the view name found via traversal is used later in the same
request by the view lookup subsystem to find a view callable. How Pyramid performs view lookup is
explained within the View Configuration chapter.

0.3. Narrative Documentation 591


The Pyramid Web Framework, Version 1.9.4

The Resource Tree

The resource tree is a set of nested dictionary-like resource objects that begins with a root resource. In
order to use traversal to resolve URLs to code, your application must supply a resource tree to Pyramid.

In order to supply a root resource for an application the Pyramid Router is configured with a callback known
as a root factory. The root factory is supplied by the application at startup time as the root_factory
argument to the Configurator.

The root factory is a Python callable that accepts a request object, and returns the root object of the resource
tree. A function or class is typically used as an application’s root factory. Here’s an example of a simple
root factory class:

1 class Root(dict):
2 def __init__(self, request):
3 pass

Here’s an example of using this root factory within startup configuration, by passing it to an instance of a
Configurator named config:

1 config = Configurator(root_factory=Root)

The root_factory argument to the Configurator constructor registers this root factory to be called
to generate a root resource whenever a request enters the application. The root factory registered this way
is also known as the global root factory. A root factory can alternatively be passed to the Configurator
as a dotted Python name which can refer to a root factory defined in a different module.

If no root factory is passed to the Pyramid Configurator constructor, or if the root_factory value
specified is None, a default root factory is used. The default root factory always returns a resource that
has no child resources; it is effectively empty.

Usually a root factory for a traversal-based application will be more complicated than the above Root
class. In particular it may be associated with a database connection or another persistence mechanism.
The above Root class is analogous to the default root factory present in Pyramid. The default root factory
is very simple and not very useful.

If the items contained within the resource tree are ”persistent” (they have state that lasts longer than
the execution of a single process), they become analogous to the concept of domain model objects used by
many other frameworks.

592 Contents
The Pyramid Web Framework, Version 1.9.4

The resource tree consists of container resources and leaf resources. There is only one difference between
a container resource and a leaf resource: container resources possess a __getitem__ method (making
it ”dictionary-like”) while leaf resources do not. The __getitem__ method was chosen as the signifying
difference between the two types of resources because the presence of this method is how Python itself
typically determines whether an object is ”containerish” or not (dictionary objects are ”containerish”).

Each container resource is presumed to be willing to return a child resource or raise a KeyError based
on a name passed to its __getitem__.

Leaf-level instances must not have a __getitem__. If instances that you’d like to be leaves already
happen to have a __getitem__ through some historical inequity, you should subclass these resource
types and cause their __getitem__ methods to simply raise a KeyError. Or just disuse them and
think up another strategy.

Usually the traversal root is a container resource, and as such it contains other resources. However, it
doesn’t need to be a container. Your resource tree can be as shallow or as deep as you require.

In general, the resource tree is traversed beginning at its root resource using a sequence of path elements
described by the PATH_INFO of the current request. If there are path segments, the root resource’s
__getitem__ is called with the next path segment, and it is expected to return another resource. The
resulting resource’s __getitem__ is called with the very next path segment, and it is expected to return
another resource. This happens ad infinitum until all path segments are exhausted.

The Traversal Algorithm

This section will attempt to explain the Pyramid traversal algorithm. We’ll provide a description of the
algorithm, a diagram of how the algorithm works, and some example traversal scenarios that might help
you understand how the algorithm operates against a specific resource tree.

We’ll also talk a bit about view lookup. The View Configuration chapter discusses view lookup in detail,
and it is the canonical source for information about views. Technically, view lookup is a Pyramid subsystem
that is separated from traversal entirely. However, we’ll describe the fundamental behavior of view lookup
in the examples in the next few sections to give you an idea of how traversal and view lookup cooperate,
because they are almost always used together.

0.3. Narrative Documentation 593


The Pyramid Web Framework, Version 1.9.4

A Description of the Traversal Algorithm

When a user requests a page from your traversal-powered application, the system uses this algorithm to
find a context resource and a view name.

1. The request for the page is presented to the Pyramid router in terms of a standard WSGI request,
which is represented by a WSGI environment and a WSGI start_response callable.

2. The router creates a request object based on the WSGI environment.

3. The root factory is called with the request. It returns a root resource.

4. The router uses the WSGI environment’s PATH_INFO information to determine the path segments
to traverse. The leading slash is stripped off PATH_INFO, and the remaining path segments are
split on the slash character to form a traversal sequence.

The traversal algorithm by default attempts to first URL-unquote and then Unicode-decode each path
segment derived from PATH_INFO from its natural byte string (str type) representation. URL un-
quoting is performed using the Python standard library urllib.unquote function. Conversion
from a URL-decoded string into Unicode is attempted using the UTF-8 encoding. If any URL-
unquoted path segment in PATH_INFO is not decodeable using the UTF-8 decoding, a TypeError
is raised. A segment will be fully URL-unquoted and UTF8-decoded before it is passed in to the
__getitem__ of any resource during traversal.

Thus a request with a PATH_INFO variable of /a/b/c maps to the traversal sequence [u'a',
u'b', u'c'].

5. Traversal begins at the root resource returned by the root factory. For the traversal sequence [u'a',
u'b', u'c'], the root resource’s __getitem__ is called with the name 'a'. Traversal con-
tinues through the sequence. In our example, if the root resource’s __getitem__ called with
the name a returns a resource (a.k.a. resource ”A”), that resource’s __getitem__ is called
with the name 'b'. If resource ”A” returns a resource ”B” when asked for 'b', resource B’s
__getitem__ is then asked for the name 'c', and may return resource ”C”.

6. Traversal ends when either (a) the entire path is exhausted, (b) when any resource raises a
KeyError from its __getitem__, (c) when any non-final path element traversal does not have
a __getitem__ method (resulting in an AttributeError), or (d) when any path element is
prefixed with the set of characters @@ (indicating that the characters following the @@ token should
be treated as a view name).

7. When traversal ends for any of the reasons in the previous step, the last resource found during traver-
sal is deemed to be the context. If the path has been exhausted when traversal ends, the view name
is deemed to be the empty string (''). However, if the path was not exhausted before traversal
terminated, the first remaining path segment is treated as the view name.

594 Contents
The Pyramid Web Framework, Version 1.9.4

8. Any subsequent path elements after the view name is found are deemed the subpath. The subpath is
always a sequence of path segments that come from PATH_INFO that are ”left over” after traversal
has completed.

Once the context resource, the view name, and associated attributes such as the subpath are located, the
job of traversal is finished. It passes back the information it obtained to its caller, the Pyramid Router,
which subsequently invokes view lookup with the context and view name information.

The traversal algorithm exposes two special cases:

• You will often end up with a view name that is the empty string as the result of a particular traversal.
This indicates that the view lookup machinery should lookup the default view. The default view is a
view that is registered with no name or a view which is registered with a name that equals the empty
string.

• If any path segment element begins with the special characters @@ (think of them as goggles), the
value of that segment minus the goggle characters is considered the view name immediately and
traversal stops there. This allows you to address views that may have the same names as resource
names in the tree unambiguously.

Finally, traversal is responsible for locating a virtual root. A virtual root is used during ”virtual hosting”.
See the Virtual Hosting chapter for information. We won’t speak more about it in this chapter.

0.3. Narrative Documentation 595


The Pyramid Web Framework, Version 1.9.4

596 Contents
The Pyramid Web Framework, Version 1.9.4

Traversal Algorithm Examples

No one can be expected to understand the traversal algorithm by analogy and description alone, so let’s
examine some traversal scenarios that use concrete URLs and resource tree compositions.

Let’s pretend the user asks for http://example.com/foo/bar/baz/biz/buz.txt. The re-


quest’s PATH_INFO in that case is /foo/bar/baz/biz/buz.txt. Let’s further pretend that when
this request comes in, we’re traversing the following resource tree:

/--
|
|-- foo
|
----bar

Here’s what happens:

• traversal traverses the root, and attempts to find ”foo”, which it finds.

• traversal traverses ”foo”, and attempts to find ”bar”, which it finds.

• traversal traverses ”bar”, and attempts to find ”baz”, which it does not find (the ”bar” resource raises
a KeyError when asked for ”baz”).

The fact that it does not find ”baz” at this point does not signify an error condition. It signifies the following:

• The context is the ”bar” resource (the context is the last resource found during traversal).

• The view name is baz.

• The subpath is ('biz', 'buz.txt').

At this point, traversal has ended, and view lookup begins.

Because it’s the ”context” resource, the view lookup machinery examines ”bar” to find out what ”type” it
is. Let’s say it finds that the context is a Bar type (because ”bar” happens to be an instance of the class
Bar). Using the view name (baz) and the type, view lookup asks the application registry this question:

• Please find me a view callable registered using a view configuration with the name ”baz” that can
be used for the class Bar.

Let’s say that view lookup finds no matching view type. In this circumstance, the Pyramid router returns
the result of the Not Found View and the request ends.

However, for this tree:

0.3. Narrative Documentation 597


The Pyramid Web Framework, Version 1.9.4

/--
|
|-- foo
|
----bar
|
----baz
|
biz

The user asks for http://example.com/foo/bar/baz/biz/buz.txt

• traversal traverses ”foo”, and attempts to find ”bar”, which it finds.

• traversal traverses ”bar”, and attempts to find ”baz”, which it finds.

• traversal traverses ”baz”, and attempts to find ”biz”, which it finds.

• traversal traverses ”biz”, and attempts to find ”buz.txt”, which it does not find.

The fact that it does not find a resource related to ”buz.txt” at this point does not signify an error condition.
It signifies the following:

• The context is the ”biz” resource (the context is the last resource found during traversal).

• The view name is ”buz.txt”.

• The subpath is an empty sequence ( () ).

At this point, traversal has ended, and view lookup begins.

Because it’s the ”context” resource, the view lookup machinery examines the ”biz” resource to find out
what ”type” it is. Let’s say it finds that the resource is a Biz type (because ”biz” is an instance of the
Python class Biz). Using the view name (buz.txt) and the type, view lookup asks the application
registry this question:

• Please find me a view callable registered with a view configuration with the name buz.txt that
can be used for class Biz.

Let’s say that question is answered by the application registry. In such a situation, the application registry
returns a view callable. The view callable is then called with the current WebOb request as the sole
argument, request. It is expected to return a response.

598 Contents
The Pyramid Web Framework, Version 1.9.4

The Example View Callables Accept Only a Request; How Do I Access the Context Resource?

Most of the examples in this documentation assume that a view callable is typically passed only a
request object. Sometimes your view callables need access to the context resource, especially when
you use traversal. You might use a supported alternative view callable argument list in your view
callables such as the (context, request) calling convention described in Alternate View Callable
Argument/Calling Conventions. But you don’t need to if you don’t want to. In view callables that accept
only a request, the context resource found by traversal is available as the context attribute of the
request object, e.g., request.context. The view name is available as the view_name attribute
of the request object, e.g., request.view_name. Other Pyramid-specific request attributes are also
available as described in Special Attributes Added to the Request by Pyramid.

Using Resource Interfaces in View Configuration

Instead of registering your views with a context that names a Python resource class, you can optionally
register a view callable with a context which is an interface. An interface can be attached arbitrarily to
any resource object. View lookup treats context interfaces specially, and therefore the identity of a resource
can be divorced from that of the class which implements it. As a result, associating a view with an interface
can provide more flexibility for sharing a single view between two or more different implementations of a
resource type. For example, if two resource objects of different Python class types share the same interface,
you can use the same view configuration to specify both of them as a context.

In order to make use of interfaces in your application during view dispatch, you must create an interface
and mark up your resource classes or instances with interface declarations that refer to this interface.

To attach an interface to a resource class, you define the interface and use the zope.interface.
implementer() class decorator to associate the interface with the class.

1 from zope.interface import Interface


2 from zope.interface import implementer
3

4 class IHello(Interface):
5 """ A marker interface """
6

7 @implementer(IHello)
8 class Hello(object):
9 pass

0.3. Narrative Documentation 599


The Pyramid Web Framework, Version 1.9.4

To attach an interface to a resource instance, you define the interface and use the zope.interface.
alsoProvides() function to associate the interface with the instance. This function mutates the in-
stance in such a way that the interface is attached to it.

1 from zope.interface import Interface


2 from zope.interface import alsoProvides
3

4 class IHello(Interface):
5 """ A marker interface """
6

7 class Hello(object):
8 pass
9

10 def make_hello():
11 hello = Hello()
12 alsoProvides(hello, IHello)
13 return hello

Regardless of how you associate an interface—with either a resource instance or a resource class—the
resulting code to associate that interface with a view callable is the same. Assuming the above code that
defines an IHello interface lives in the root of your application, and its module is named ”resources.py”,
the interface declaration below will associate the mypackage.views.hello_world view with re-
sources that implement, or provide, this interface.

1 # config is an instance of pyramid.config.Configurator


2

3 config.add_view('mypackage.views.hello_world', name='hello.html',
4 context='mypackage.resources.IHello')

Any time a resource that is determined to be the context provides this interface, and a view named hello.
html is looked up against it as per the URL, the mypackage.views.hello_world view callable
will be invoked.

Note, in cases where a view is registered against a resource class, and a view is also registered against an
interface that the resource class implements, an ambiguity arises. Views registered for the resource class
take precedence over any views registered for any interface the resource class implements. Thus, if one
view configuration names a context of both the class type of a resource, and another view configuration
names a context of interface implemented by the resource’s class, and both view configurations are
otherwise identical, the view registered for the context’s class will ”win”.

For more information about defining resources with interfaces for use within view configuration, see Re-
sources Which Implement Interfaces.

600 Contents
The Pyramid Web Framework, Version 1.9.4

References

A tutorial showing how traversal can be used within a Pyramid application exists in ZODB + Traversal
Wiki Tutorial.

See the View Configuration chapter for detailed information about view lookup.

The pyramid.traversal module contains API functions that deal with traversal, such as traversal
invocation from within application code.

The pyramid.request.Request.resource_url() method generates a URL when given a re-


source retrieved from a resource tree.

0.3.28 Security

Pyramid provides an optional, declarative, security system. Security in Pyramid is separated into authenti-
cation and authorization. The two systems communicate via principal identifiers. Authentication is merely
the mechanism by which credentials provided in the request are resolved to one or more principal identi-
fiers. These identifiers represent the users and groups that are in effect during the request. Authorization
then determines access based on the principal identifiers, the requested permission, and a context.

The Pyramid authorization system can prevent a view from being invoked based on an authorization policy.
Before a view is invoked, the authorization system can use the credentials in the request along with the
context resource to determine if access will be allowed. Here’s how it works at a high level:

• A user may or may not have previously visited the application and supplied authentication cre-
dentials, including a userid. If so, the application may have called pyramid.security.
remember() to remember these.

• A request is generated when a user visits the application.

• Based on the request, a context resource is located through resource location. A context is located
differently depending on whether the application uses traversal or URL dispatch, but a context is
ultimately found in either case. See the URL Dispatch chapter for more information.

• A view callable is located by view lookup using the context as well as other attributes of the request.

• If an authentication policy is in effect, it is passed the request. It will return some number of principal
identifiers. To do this, the policy would need to determine the authenticated userid present in the
request.

0.3. Narrative Documentation 601


The Pyramid Web Framework, Version 1.9.4

• If an authorization policy is in effect and the view configuration associated with the view callable that
was found has a permission associated with it, the authorization policy is passed the context, some
number of principal identifiers returned by the authentication policy, and the permission associated
with the view; it will allow or deny access.

• If the authorization policy allows access, the view callable is invoked.

• If the authorization policy denies access, the view callable is not invoked. Instead the forbidden
view is invoked.

Authorization is enabled by modifying your application to include an authentication policy and autho-
rization policy. Pyramid comes with a variety of implementations of these policies. To provide maximal
flexibility, Pyramid also allows you to create custom authentication policies and authorization policies.

Enabling an Authorization Policy

Pyramid does not enable any authorization policy by default. All views are accessible by completely
anonymous users. In order to begin protecting views from execution based on security settings, you need
to enable an authorization policy.

Enabling an Authorization Policy Imperatively

Use the set_authorization_policy() method of the Configurator to enable an authoriza-


tion policy.

You must also enable an authentication policy in order to enable the authorization policy. This is because
authorization, in general, depends upon authentication. Use the set_authentication_policy()
method during application setup to specify the authentication policy.

For example:

1 from pyramid.config import Configurator


2 from pyramid.authentication import AuthTktAuthenticationPolicy
3 from pyramid.authorization import ACLAuthorizationPolicy
4 authn_policy = AuthTktAuthenticationPolicy('seekrit', hashalg=
,→'sha512')

5 authz_policy = ACLAuthorizationPolicy()
6 config = Configurator()
7 config.set_authentication_policy(authn_policy)
8 config.set_authorization_policy(authz_policy)

602 Contents
The Pyramid Web Framework, Version 1.9.4

The authentication_policy and authorization_policy arguments may also be


passed to their respective methods mentioned above as dotted Python name values, each representing the
dotted name path to a suitable implementation global defined at Python module scope.

The above configuration enables a policy which compares the value of an ”auth ticket” cookie passed in the
request’s environment which contains a reference to a single userid, and matches that userid’s principals
against the principals present in any ACL found in the resource tree when attempting to call some view.

While it is possible to mix and match different authentication and authorization policies, it is an error to
configure a Pyramid application with an authentication policy but without the authorization policy or vice
versa. If you do this, you’ll receive an error at application startup time.

See also:

See also the pyramid.authorization and pyramid.authentication modules for alternative


implementations of authorization and authentication policies.

Protecting Views with Permissions

To protect a view callable from invocation based on a user’s security settings when a particular type of
resource becomes the context, you must pass a permission to view configuration. Permissions are usually
just strings, and they have no required composition: you can name permissions whatever you like.

For example, the following view declaration protects the view named add_entry.html when the con-
text resource is of type Blog with the add permission using the pyramid.config.Configurator.
add_view() API:

1 # config is an instance of pyramid.config.Configurator


2

3 config.add_view('mypackage.views.blog_entry_add_view',
4 name='add_entry.html',
5 context='mypackage.resources.Blog',
6 permission='add')

The equivalent view registration including the add permission name may be performed via the
@view_config decorator:

0.3. Narrative Documentation 603


The Pyramid Web Framework, Version 1.9.4

1 from pyramid.view import view_config


2 from resources import Blog
3

4 @view_config(context=Blog, name='add_entry.html', permission='add')


5 def blog_entry_add_view(request):
6 """ Add blog entry code goes here """
7 pass

As a result of any of these various view configuration statements, if an authorization policy is in place when
the view callable is found during normal application operations, the requesting user will need to possess the
add permission against the context resource in order to be able to invoke the blog_entry_add_view
view. If they do not, the Forbidden view will be invoked.

Setting a Default Permission

If a permission is not supplied to a view configuration, the registered view will always be executable by
entirely anonymous users: any authorization policy in effect is ignored.

In support of making it easier to configure applications which are ”secure by default”, Pyramid allows you
to configure a default permission. If supplied, the default permission is used as the permission string to
all view registrations which don’t otherwise name a permission argument.

The pyramid.config.Configurator.set_default_permission() method supports con-


figuring a default permission for an application.

When a default permission is registered:

• If a view configuration names an explicit permission, the default permission is ignored for that
view registration, and the view-configuration-named permission is used.

• If a view configuration names the permission pyramid.security.


NO_PERMISSION_REQUIRED, the default permission is ignored, and the view is registered
without a permission (making it available to all callers regardless of their credentials).

When you register a default permission, all views (even exception view views) are protected
by a permission. For all views which are truly meant to be anonymously accessible, you will need to
associate the view’s configuration with the pyramid.security.NO_PERMISSION_REQUIRED
permission.

604 Contents
The Pyramid Web Framework, Version 1.9.4

Assigning ACLs to Your Resource Objects

When the default Pyramid authorization policy determines whether a user possesses a particular permis-
sion with respect to a resource, it examines the ACL associated with the resource. An ACL is associated
with a resource by adding an __acl__ attribute to the resource object. This attribute can be defined on
the resource instance if you need instance-level security, or it can be defined on the resource class if you
just need type-level security.
For example, an ACL might be attached to the resource for a blog via its class:

1 from pyramid.security import Allow


2 from pyramid.security import Everyone
3

4 class Blog(object):
5 __acl__ = [
6 (Allow, Everyone, 'view'),
7 (Allow, 'group:editors', 'add'),
8 (Allow, 'group:editors', 'edit'),
9 ]

Or, if your resources are persistent, an ACL might be specified via the __acl__ attribute of an instance
of a resource:

1 from pyramid.security import Allow


2 from pyramid.security import Everyone
3

4 class Blog(object):
5 pass
6

7 blog = Blog()
8

9 blog.__acl__ = [
10 (Allow, Everyone, 'view'),
11 (Allow, 'group:editors', 'add'),
12 (Allow, 'group:editors', 'edit'),
13 ]

Whether an ACL is attached to a resource’s class or an instance of the resource itself, the effect is the
same. It is useful to decorate individual resource instances with an ACL (as opposed to just decorating
their class) in applications such as content management systems where fine-grained access is required on
an object-by-object basis.
Dynamic ACLs are also possible by turning the ACL into a callable on the resource. This may allow the
ACL to dynamically generate rules based on properties of the instance.

0.3. Narrative Documentation 605


The Pyramid Web Framework, Version 1.9.4

1 from pyramid.security import Allow


2 from pyramid.security import Everyone
3

4 class Blog(object):
5 def __acl__(self):
6 return [
7 (Allow, Everyone, 'view'),
8 (Allow, self.owner, 'edit'),
9 (Allow, 'group:editors', 'edit'),
10 ]
11

12 def __init__(self, owner):


13 self.owner = owner

Writing __acl__ as properties is discouraged because an AttributeError occurring in


fget or fset will be silently dismissed (this is consistent with Python getattr and hasattr
behaviors). For dynamic ACLs, simply use callables, as documented above.

Elements of an ACL

Here’s an example ACL:

1 from pyramid.security import Allow


2 from pyramid.security import Everyone
3

4 __acl__ = [
5 (Allow, Everyone, 'view'),
6 (Allow, 'group:editors', 'add'),
7 (Allow, 'group:editors', 'edit'),
8 ]

The example ACL indicates that the pyramid.security.Everyone principal—a special system-
defined principal indicating, literally, everyone—is allowed to view the blog, and the group:editors
principal is allowed to add to and edit the blog.

Each element of an ACL is an ACE, or access control entry. For example, in the above code block, there are
three ACEs: (Allow, Everyone, 'view'), (Allow, 'group:editors', 'add'), and
(Allow, 'group:editors', 'edit').

606 Contents
The Pyramid Web Framework, Version 1.9.4

The first element of any ACE is either pyramid.security.Allow, or pyramid.security.


Deny, representing the action to take when the ACE matches. The second element is a principal. The
third argument is a permission or sequence of permission names.

A principal is usually a user id, however it also may be a group id if your authentication system provides
group information and the effective authentication policy policy is written to respect group information.
See Extending Default Authentication Policies.

Each ACE in an ACL is processed by an authorization policy in the order dictated by the ACL. So if you
have an ACL like this:

1 from pyramid.security import Allow


2 from pyramid.security import Deny
3 from pyramid.security import Everyone
4

5 __acl__ = [
6 (Allow, Everyone, 'view'),
7 (Deny, Everyone, 'view'),
8 ]

The default authorization policy will allow everyone the view permission, even though later in the ACL
you have an ACE that denies everyone the view permission. On the other hand, if you have an ACL like
this:

1 from pyramid.security import Everyone


2 from pyramid.security import Allow
3 from pyramid.security import Deny
4

5 __acl__ = [
6 (Deny, Everyone, 'view'),
7 (Allow, Everyone, 'view'),
8 ]

The authorization policy will deny everyone the view permission, even though later in the ACL, there is
an ACE that allows everyone.

The third argument in an ACE can also be a sequence of permission names instead of a single permission
name. So instead of creating multiple ACEs representing a number of different permission grants to a
single group:editors group, we can collapse this into a single ACE, as below.

0.3. Narrative Documentation 607


The Pyramid Web Framework, Version 1.9.4

1 from pyramid.security import Allow


2 from pyramid.security import Everyone
3

4 __acl__ = [
5 (Allow, Everyone, 'view'),
6 (Allow, 'group:editors', ('add', 'edit')),
7 ]

Special Principal Names

Special principal names exist in the pyramid.security module. They can be imported for use in your
own code to populate ACLs, e.g., pyramid.security.Everyone.

pyramid.security.Everyone

Literally, everyone, no matter what. This object is actually a string under the hood (system.
Everyone). Every user is the principal named ”Everyone” during every request, even if a
security policy is not in use.

pyramid.security.Authenticated

Any user with credentials as determined by the current security policy. You might think of
it as any user that is ”logged in”. This object is actually a string under the hood (system.
Authenticated).

Special Permissions

Special permission names exist in the pyramid.security module. These can be imported for use in
ACLs.

pyramid.security.ALL_PERMISSIONS

An object representing, literally, all permissions. Useful in an ACL like so: (Allow,
'fred', ALL_PERMISSIONS). The ALL_PERMISSIONS object is actually a stand-in
object that has a __contains__ method that always returns True, which, for all known
authorization policies, has the effect of indicating that a given principal has any permission
asked for by the system.

608 Contents
The Pyramid Web Framework, Version 1.9.4

Special ACEs

A convenience ACE is defined representing a deny to everyone of all permissions in pyramid.


security.DENY_ALL. This ACE is often used as the last ACE of an ACL to explicitly cause inheriting
authorization policies to ”stop looking up the traversal tree” (effectively breaking any inheritance). For
example, an ACL which allows only fred the view permission for a particular resource, despite what
inherited ACLs may say when the default authorization policy is in effect, might look like so:

1 from pyramid.security import Allow


2 from pyramid.security import DENY_ALL
3

4 __acl__ = [ (Allow, 'fred', 'view'), DENY_ALL ]

Under the hood, the pyramid.security.DENY_ALL ACE equals the following:

1 from pyramid.security import ALL_PERMISSIONS


2 __acl__ = [ (Deny, Everyone, ALL_PERMISSIONS) ]

ACL Inheritance and Location-Awareness

While the default authorization policy is in place, if a resource object does not have an ACL when it is the
context, its parent is consulted for an ACL. If that object does not have an ACL, its parent is consulted for
an ACL, ad infinitum, until we’ve reached the root and there are no more parents left.
In order to allow the security machinery to perform ACL inheritance, resource objects must provide
location-awareness. Providing location-awareness means two things: the root object in the resource tree
must have a __name__ attribute and a __parent__ attribute.

1 class Blog(object):
2 __name__ = ''
3 __parent__ = None

An object with a __parent__ attribute and a __name__ attribute is said to be location-aware.


Location-aware objects define a __parent__ attribute which points at their parent object. The root
object’s __parent__ is None.
See also:
See also pyramid.location for documentations of functions which use location-awareness.
See also:
See also Location-Aware Resources.

0.3. Narrative Documentation 609


The Pyramid Web Framework, Version 1.9.4

Changing the Forbidden View

When Pyramid denies a view invocation due to an authorization denial, the special forbidden view is
invoked. Out of the box, this forbidden view is very plain. See Changing the Forbidden View within Using
Hooks for instructions on how to create a custom forbidden view and arrange for it to be called when view
authorization is denied.

Debugging View Authorization Failures

If your application in your judgment is allowing or denying view access inappropriately, start your appli-
cation under a shell using the PYRAMID_DEBUG_AUTHORIZATION environment variable set to 1. For
example:

$ PYRAMID_DEBUG_AUTHORIZATION=1 $VENV/bin/pserve myproject.ini

When any authorization takes place during a top-level view rendering, a message will be logged to the
console (to stderr) about what ACE in which ACL permitted or denied the authorization based on authen-
tication information.

This behavior can also be turned on in the application .ini file by setting the pyramid.
debug_authorization key to true within the application’s configuration section, e.g.:

1 [app:main]
2 use = egg:MyProject
3 pyramid.debug_authorization = true

With this debug flag turned on, the response sent to the browser will also contain security debugging
information in its body.

Debugging Imperative Authorization Failures

The pyramid.request.Request.has_permission() API is used to check security within view


functions imperatively. It returns instances of objects that are effectively booleans. But these objects are not
raw True or False objects, and have information attached to them about why the permission was allowed
or denied. The object will be one of pyramid.security.ACLAllowed, pyramid.security.
ACLDenied, pyramid.security.Allowed, or pyramid.security.Denied, as documented
in pyramid.security. At the very minimum, these objects will have a msg attribute, which is a string
indicating why the permission was denied or allowed. Introspecting this information in the debugger or
via print statements when a call to has_permission() fails is often useful.

610 Contents
The Pyramid Web Framework, Version 1.9.4

Extending Default Authentication Policies

Pyramid ships with some built in authentication policies for use in your applications. See pyramid.
authentication for the available policies. They differ on their mechanisms for tracking authentication
credentials between requests, however they all interface with your application in mostly the same way.

Above you learned about Assigning ACLs to Your Resource Objects. Each principal
used in the ACL is matched against the list returned from pyramid.interfaces.
IAuthenticationPolicy.effective_principals(). Similarly, pyramid.
request.Request.authenticated_userid() maps to pyramid.interfaces.
IAuthenticationPolicy.authenticated_userid().

You may control these values by subclassing the default authentication policies. For example, below we
subclass the pyramid.authentication.AuthTktAuthenticationPolicy and define extra
functionality to query our database before confirming that the userid is valid in order to avoid blindly
trusting the value in the cookie (what if the cookie is still valid, but the user has deleted their account?).
We then use that userid to augment the effective_principals with information about groups and
other state for that user.

1 from pyramid.authentication import AuthTktAuthenticationPolicy


2

3 class MyAuthenticationPolicy(AuthTktAuthenticationPolicy):
4 def authenticated_userid(self, request):
5 userid = self.unauthenticated_userid(request)
6 if userid:
7 if request.verify_userid_is_still_valid(userid):
8 return userid
9

10 def effective_principals(self, request):


11 principals = [Everyone]
12 userid = self.authenticated_userid(request)
13 if userid:
14 principals += [Authenticated, str(userid)]
15 return principals

In most instances authenticated_userid and effective_principals are application-


specific, whereas unauthenticated_userid, remember, and forget are generic and focused
on transport and serialization of data between consecutive requests.

0.3. Narrative Documentation 611


The Pyramid Web Framework, Version 1.9.4

Creating Your Own Authentication Policy

Pyramid ships with a number of useful out-of-the-box security policies (see pyramid.
authentication). However, creating your own authentication policy is often necessary when
you want to control the ”horizontal and vertical” of how your users authenticate. Doing so is a matter of
creating an instance of something that implements the following interface:

1 class IAuthenticationPolicy(object):
2 """ An object representing a Pyramid authentication policy. """
3

4 def authenticated_userid(self, request):


5 """ Return the authenticated :term:`userid` or ``None`` if
6 no authenticated userid can be found. This method of the
7 policy should ensure that a record exists in whatever
8 persistent store is used related to the user (the user
9 should not have been deleted); if a record associated with
10 the current id does not exist in a persistent store, it
11 should return ``None``.
12

13 """
14

15 def unauthenticated_userid(self, request):


16 """ Return the *unauthenticated* userid. This method
17 performs the same duty as ``authenticated_userid`` but is
18 permitted to return the userid based only on data present
19 in the request; it needn't (and shouldn't) check any
20 persistent store to ensure that the user record related to
21 the request userid exists.
22

23 This method is intended primarily a helper to assist the


24 ``authenticated_userid`` method in pulling credentials out
25 of the request data, abstracting away the specific headers,
26 query strings, etc that are used to authenticate the␣
,→request.

27

28 """
29

30 def effective_principals(self, request):


31 """ Return a sequence representing the effective principals
32 typically including the :term:`userid` and any groups␣
,→belonged

33 to by the current user, always including 'system' groups␣


,→such
(continues on next page)

612 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


34 as ``pyramid.security.Everyone`` and
35 ``pyramid.security.Authenticated``.
36

37 """
38

39 def remember(self, request, userid, **kw):


40 """ Return a set of headers suitable for 'remembering' the
41 :term:`userid` named ``userid`` when set in a response. An
42 individual authentication policy and its consumers can
43 decide on the composition and meaning of **kw.
44

45 """
46

47 def forget(self, request):


48 """ Return a set of headers suitable for 'forgetting' the
49 current user on subsequent requests.
50

51 """

After you do so, you can pass an instance of such a class into the set_authentication_policy
method at configuration time to use it.

Creating Your Own Authorization Policy

An authorization policy is a policy that allows or denies access after a user has been au-
thenticated. Most Pyramid applications will use the default pyramid.authorization.
ACLAuthorizationPolicy.

However, in some cases, it’s useful to be able to use a different authorization policy than the default
ACLAuthorizationPolicy. For example, it might be desirable to construct an alternate authoriza-
tion policy which allows the application to use an authorization mechanism that does not involve ACL
objects.

Pyramid ships with only a single default authorization policy, so you’ll need to create your own if you’d
like to use a different one. Creating and using your own authorization policy is a matter of creating an
instance of an object that implements the following interface:

0.3. Narrative Documentation 613


The Pyramid Web Framework, Version 1.9.4

1 class IAuthorizationPolicy(object):
2 """ An object representing a Pyramid authorization policy. """
3 def permits(self, context, principals, permission):
4 """ Return ``True`` if any of the ``principals`` is allowed␣
,→the

5 ``permission`` in the current ``context``, else return␣


,→``False``

6 """
7

8 def principals_allowed_by_permission(self, context, permission):


9 """ Return a set of principal identifiers allowed by the
10 ``permission`` in ``context``. This behavior is optional;␣
,→if you

11 choose to not implement it you should define this method as


12 something which raises a ``NotImplementedError``. This␣
,→method

13 will only be called when the


14 ``pyramid.security.principals_allowed_by_permission`` API is
15 used."""

After you do so, you can pass an instance of such a class into the set_authorization_policy
method at configuration time to use it.

Admonishment Against Secret-Sharing

A ”secret” is required by various components of Pyramid. For example, the authentication policy below
uses a secret value seekrit:

authn_policy = AuthTktAuthenticationPolicy('seekrit', hashalg=


,→'sha512')

A session factory also requires a secret:

my_session_factory = SignedCookieSessionFactory('itsaseekreet')

It is tempting to use the same secret for multiple Pyramid subsystems. For example, you might be tempted
to use the value seekrit as the secret for both the authentication policy and the session factory defined
above. This is a bad idea, because in both cases, these secrets are used to sign the payload of the data.

614 Contents
The Pyramid Web Framework, Version 1.9.4

If you use the same secret for two different parts of your application for signing purposes, it may allow
an attacker to get his chosen plaintext signed, which would allow the attacker to control the content of the
payload. Re-using a secret across two different subsystems might drop the security of signing to zero. Keys
should not be re-used across different contexts where an attacker has the possibility of providing a chosen
plaintext.

Preventing Cross-Site Request Forgery Attacks

Cross-site request forgery attacks are a phenomenon whereby a user who is logged in to your website might
inadvertantly load a URL because it is linked from, or embedded in, an attacker’s website. If the URL is
one that may modify or delete data, the consequences can be dire.

You can avoid most of these attacks by issuing a unique token to the browser and then requiring that it be
present in all potentially unsafe requests. Pyramid provides facilities to create and check CSRF tokens.

By default Pyramid comes with a session-based CSRF implementation pyramid.csrf.


SessionCSRFStoragePolicy. To use it, you must first enable a session factory as described
in Using the Default Session Factory or Using Alternate Session Factories. Alternatively, you can
use a cookie-based implementation pyramid.csrf.CookieCSRFStoragePolicy which gives
some additional flexibility as it does not require a session for each user. You can also define your
own implementation of pyramid.interfaces.ICSRFStoragePolicy and register it with the
pyramid.config.Configurator.set_csrf_storage_policy() directive.

For example:

from pyramid.config import Configurator

config = Configurator()
config.set_csrf_storage_policy(MyCustomCSRFPolicy())

Using the csrf.get_csrf_token Method

To get the current CSRF token, use the pyramid.csrf.get_csrf_token method.

from pyramid.csrf import get_csrf_token


token = get_csrf_token(request)

The get_csrf_token() method accepts a single argument: the request. It returns a CSRF token
string. If get_csrf_token() or new_csrf_token() was invoked previously for this user, then
the existing token will be returned. If no CSRF token previously existed for this user, then a new token
will be set into the session and returned. The newly created token will be opaque and randomized.

0.3. Narrative Documentation 615


The Pyramid Web Framework, Version 1.9.4

Using the get_csrf_token global in templates

Templates have a get_csrf_token() method inserted into their globals, which allows you to get the
current token without modifying the view code. This method takes no arguments and returns a CSRF
token string. You can use the returned token as the value of a hidden field in a form that posts to a method
that requires elevated privileges, or supply it as a request header in AJAX requests.
For example, include the CSRF token as a hidden field:

<form method="post" action="/myview">


<input type="hidden" name="csrf_token" value="${get_csrf_token()}
,→">

<input type="submit" value="Delete Everything">


</form>

Or include it as a header in a jQuery AJAX request:

var csrfToken = "${get_csrf_token()}";


$.ajax({
type: "POST",
url: "/myview",
headers: { 'X-CSRF-Token': csrfToken }
}).done(function() {
alert("Deleted");
});

The handler for the URL that receives the request should then require that the correct CSRF token is
supplied.

Using the csrf.new_csrf_token Method

To explicitly create a new CSRF token, use the csrf.new_csrf_token() method. This differs only
from csrf.get_csrf_token() inasmuch as it clears any existing CSRF token, creates a new CSRF
token, sets the token into the user, and returns the token.

from pyramid.csrf import new_csrf_token


token = new_csrf_token(request)

It is not possible to force a new CSRF token from a template. If you want to regenerate your CSRF
token then do it in the view code and return the new token as part of the context.

616 Contents
The Pyramid Web Framework, Version 1.9.4

Checking CSRF Tokens Manually

In request handling code, you can check the presence and validity of a CSRF token with pyramid.
csrf.check_csrf_token(). If the token is valid, it will return True, otherwise it will raise
HTTPBadRequest. Optionally, you can specify raises=False to have the check return False
instead of raising an exception.

By default, it checks for a POST parameter named csrf_token or a header named X-CSRF-Token.

from pyramid.csrf import check_csrf_token

def myview(request):
# Require CSRF Token
check_csrf_token(request)

# ...

Checking CSRF Tokens Automatically

New in version 1.7.

Pyramid supports automatically checking CSRF tokens on requests with an unsafe method as defined
by RFC2616. Any other request may be checked manually. This feature can be turned on globally for
an application using the pyramid.config.Configurator.set_default_csrf_options()
directive. For example:

from pyramid.config import Configurator

config = Configurator()
config.set_default_csrf_options(require_csrf=True)

CSRF checking may be explicitly enabled or disabled on a per-view basis using the require_csrf view
option. A value of True or False will override the default set by set_default_csrf_options.
For example:

@view_config(route_name='hello', require_csrf=False)
def myview(request):
# ...

0.3. Narrative Documentation 617


The Pyramid Web Framework, Version 1.9.4

When CSRF checking is active, the token and header used to find the supplied CSRF to-
ken will be csrf_token and X-CSRF-Token, respectively, unless otherwise overridden by
set_default_csrf_options. The token is checked against the value in request.POST which
is the submitted form body. If this value is not present, then the header will be checked.

In addition to token based CSRF checks, if the request is using HTTPS then the automatic CSRF checking
will also check the referrer of the request to ensure that it matches one of the trusted origins. By default the
only trusted origin is the current host, however additional origins may be configured by setting pyramid.
csrf_trusted_origins to a list of domain names (and ports if they are non-standard). If a host in
the list of domains starts with a . then that will allow all subdomains as well as the domain without the ..

If CSRF checks fail then a pyramid.exceptions.BadCSRFToken or pyramid.exceptions.


BadCSRFOrigin exception will be raised. This exception may be caught and handled by an exception
view but, by default, will result in a 400 Bad Request response being sent to the client.

Checking CSRF Tokens with a View Predicate

Deprecated since version 1.7: Use the require_csrf option or read Checking CSRF Tokens Automat-
ically instead to have pyramid.exceptions.BadCSRFToken exceptions raised.

A convenient way to require a valid CSRF token for a particular view is to include check_csrf=True
as a view predicate. See pyramid.config.Configurator.add_view().

@view_config(request_method='POST', check_csrf=True, ...)


def myview(request):
...

A mismatch of a CSRF token is treated like any other predicate miss, and the predicate system, when
it doesn’t find a view, raises HTTPNotFound instead of HTTPBadRequest, so check_csrf=True
behavior is different from calling pyramid.csrf.check_csrf_token().

0.3.29 Combining Traversal and URL Dispatch

When you write most Pyramid applications, you’ll be using one or the other of two available resource
location subsystems: traversal or URL dispatch. However, to solve a limited set of problems, it’s useful to
use both traversal and URL dispatch together within the same application. Pyramid makes this possible
via hybrid applications.

618 Contents
The Pyramid Web Framework, Version 1.9.4

Reasoning about the behavior of a ”hybrid” URL dispatch + traversal application can be challeng-
ing. To successfully reason about using URL dispatch and traversal together, you need to understand
URL pattern matching, root factories, and the traversal algorithm, and the potential interactions be-
tween them. Therefore, we don’t recommend creating an application that relies on hybrid behavior
unless you must.

A Review of Non-Hybrid Applications

When used according to the tutorials in its documentation, Pyramid is a ”dual-mode” framework: the
tutorials explain how to create an application in terms of using either URL dispatch or traversal. This
chapter details how you might combine these two dispatch mechanisms, but we’ll review how they work
in isolation before trying to combine them.

URL Dispatch Only

An application that uses URL dispatch exclusively to map URLs to code will often have statements like
this within its application startup configuration:

1 # config is an instance of pyramid.config.Configurator


2

3 config.add_route('foobar', '{foo}/{bar}')
4 config.add_route('bazbuz', '{baz}/{buz}')
5

6 config.add_view('myproject.views.foobar', route_name='foobar')
7 config.add_view('myproject.views.bazbuz', route_name='bazbuz')

Each route corresponds to one or more view callables. Each view callable is associated with a route by
passing a route_name parameter that matches its name during a call to add_view(). When a route
is matched during a request, view lookup is used to match the request to its associated view callable. The
presence of calls to add_route() signify that an application is using URL dispatch.

Traversal Only

An application that uses only traversal will have view configuration declarations that look like this:

0.3. Narrative Documentation 619


The Pyramid Web Framework, Version 1.9.4

1 # config is an instance of pyramid.config.Configurator


2

3 config.add_view('mypackage.views.foobar', name='foobar')
4 config.add_view('mypackage.views.bazbuz', name='bazbuz')

When the above configuration is applied to an application, the mypackage.views.foobar view


callable above will be called when the URL /foobar is visited. Likewise, the view mypackage.
views.bazbuz will be called when the URL /bazbuz is visited.

Typically, an application that uses traversal exclusively won’t perform any calls to pyramid.config.
Configurator.add_route() in its startup code.

Hybrid Applications

Either traversal or URL dispatch alone can be used to create a Pyramid application. However, it is also
possible to combine the concepts of traversal and URL dispatch when building an application, the result
of which is a hybrid application. In a hybrid application, traversal is performed after a particular route has
matched.

A hybrid application is a lot more like a ”pure” traversal-based application than it is like a ”pure” URL-
dispatch based application. But unlike in a ”pure” traversal-based application, in a hybrid application
traversal is performed during a request after a route has already matched. This means that the URL pattern
that represents the pattern argument of a route must match the PATH_INFO of a request, and after the
route pattern has matched, most of the ”normal” rules of traversal with respect to resource location and
view lookup apply.

There are only four real differences between a purely traversal-based application and a hybrid application:

• In a purely traversal-based application, no routes are defined. In a hybrid application, at least one
route will be defined.

• In a purely traversal-based application, the root object used is global, implied by the root factory
provided at startup time. In a hybrid application, the root object at which traversal begins may be
varied on a per-route basis.

• In a purely traversal-based application, the PATH_INFO of the underlying WSGI environment is


used wholesale as a traversal path. In a hybrid application, the traversal path is not the entire
PATH_INFO string, but a portion of the URL determined by a matching pattern in the matched
route configuration’s pattern.

620 Contents
The Pyramid Web Framework, Version 1.9.4

• In a purely traversal-based application, view configurations which do not mention a route_name


argument are considered during view lookup. In a hybrid application, when a route is matched, only
view configurations which mention that route’s name as a route_name are considered during view
lookup.

More generally, a hybrid application is a traversal-based application except:

• the traversal root is chosen based on the route configuration of the route that matched, instead of
from the root_factory supplied during application startup configuration.

• the traversal path is chosen based on the route configuration of the route that matched, rather than
from the PATH_INFO of a request.

• the set of views that may be chosen during view lookup when a route matches are limited to those
which specifically name a route_name in their configuration that is the same as the matched
route’s name.

To create a hybrid mode application, use a route configuration that implies a particular root factory and
which also includes a pattern argument that contains a special dynamic part: either *traverse or
*subpath.

The Root Object for a Route Match

A hybrid application implies that traversal is performed during a request after a route has matched. Traver-
sal, by definition, must always begin at a root object. Therefore it’s important to know which root object
will be traversed after a route has matched.

Figuring out which root object results from a particular route match is straightforward. When a route is
matched:

• If the route’s configuration has a factory argument which points to a root factory callable, that
callable will be called to generate a root object.

• If the route’s configuration does not have a factory argument, the global root factory will be called
to generate a root object. The global root factory is the callable implied by the root_factory
argument passed to the Configurator at application startup time.

• If a root_factory argument is not provided to the Configurator at startup time, a default


root factory is used. The default root factory is used to generate a root object.

Root factories related to a route were explained previously within Route Factories. Both the global
root factory and default root factory were explained previously within The Resource Tree.

0.3. Narrative Documentation 621


The Pyramid Web Framework, Version 1.9.4

Using *traverse in a Route Pattern

A hybrid application most often implies the inclusion of a route configuration that contains the special
token *traverse at the end of a route’s pattern:

1 config.add_route('home', '{foo}/{bar}/*traverse')

A *traverse token at the end of the pattern in a route’s configuration implies a ”remainder” capture
value. When it is used, it will match the remainder of the path segments of the URL. This remainder
becomes the path used to perform traversal.

The *remainder route pattern syntax is explained in more detail within Route Pattern Syntax.

A hybrid mode application relies more heavily on traversal to do resource location and view lookup than
most examples indicate within URL Dispatch.

Because the pattern of the above route ends with *traverse, when this route configuration is matched
during a request, Pyramid will attempt to use traversal against the root object implied by the root factory
that is implied by the route’s configuration. Since no root_factory argument is explicitly specified for
this route, this will either be the global root factory for the application, or the default root factory. Once
traversal has found a context resource, view lookup will be invoked in almost exactly the same way it would
have been invoked in a ”pure” traversal-based application.

Let’s assume there is no global root factory configured in this application. The default root factory cannot
be traversed; it has no useful __getitem__ method. So we’ll need to associate this route configuration
with a custom root factory in order to create a useful hybrid application. To that end, let’s imagine that
we’ve created a root factory that looks like so in a module named routes.py:

1 class Resource(object):
2 def __init__(self, subobjects):
3 self.subobjects = subobjects
4

5 def __getitem__(self, name):


6 return self.subobjects[name]
7

8 root = Resource(
9 {'a': Resource({'b': Resource({'c': Resource({})})})}
10 )
11

12 def root_factory(request):
13 return root

622 Contents
The Pyramid Web Framework, Version 1.9.4

Above we’ve defined a (bogus) resource tree that can be traversed, and a root_factory function that
can be used as part of a particular route configuration statement:

1 config.add_route('home', '{foo}/{bar}/*traverse',
2 factory='mypackage.routes.root_factory')

The factory above points at the function we’ve defined. It will return an instance of the Resource
class as a root object whenever this route is matched. Instances of the Resource class can be used for
tree traversal because they have a __getitem__ method that does something nominally useful. Since
traversal uses __getitem__ to walk the resources of a resource tree, using traversal against the root
resource implied by our route statement is a reasonable thing to do.

We could have also used our root_factory function as the root_factory argument of the
Configurator constructor, instead of associating it with a particular route inside the route’s configu-
ration. Every hybrid route configuration that is matched, but which does not name a factory attribute,
will use the global root_factory function to generate a root object.

When the route configuration named home above is matched during a request, the matchdict generated will
be based on its pattern: {foo}/{bar}/*traverse. The ”capture value” implied by the *traverse
element in the pattern will be used to traverse the resource tree in order to find a context resource, starting
from the root object returned from the root factory. In the above example, the root object found will be the
instance named root in routes.py.

If the URL that matched a route with the pattern {foo}/{bar}/*traverse is http://example.
com/one/two/a/b/c, the traversal path used against the root object will be a/b/c. As a result,
Pyramid will attempt to traverse through the edges 'a', 'b', and 'c', beginning at the root object.

In our above example, this particular set of traversal steps will mean that the context resource of the view
would be the Resource object we’ve named 'c' in our bogus resource tree, and the view name resulting
from traversal will be the empty string. If you need a refresher about why this outcome is presumed, see
The Traversal Algorithm.

At this point, a suitable view callable will be found and invoked using view lookup as described in View
Configuration, but with a caveat: in order for view lookup to work, we need to define a view configuration
that will match when view lookup is invoked after a route matches:

1 config.add_route('home', '{foo}/{bar}/*traverse',
2 factory='mypackage.routes.root_factory')
3 config.add_view('mypackage.views.myview', route_name='home')

0.3. Narrative Documentation 623


The Pyramid Web Framework, Version 1.9.4

Note that the above call to add_view() includes a route_name argument. View configurations that
include a route_name argument are meant to associate a particular view declaration with a route, using
the route’s name, in order to indicate that the view should only be invoked when the route matches.

Calls to add_view() may pass a route_name attribute, which refers to the value of an existing route’s
name argument. In the above example, the route name is home, referring to the name of the route defined
above it.

The above mypackage.views.myview view callable will be invoked when the following conditions
are met:

• The route named ”home” is matched.

• The view name resulting from traversal is the empty string.

• The context resource is any object.

It is also possible to declare alternative views that may be invoked when a hybrid route is matched:

1 config.add_route('home', '{foo}/{bar}/*traverse',
2 factory='mypackage.routes.root_factory')
3 config.add_view('mypackage.views.myview', route_name='home')
4 config.add_view('mypackage.views.another_view', route_name='home',
5 name='another')

The add_view call for mypackage.views.another_view above names a different view and,
more importantly, a different view name. The above mypackage.views.another_view view will
be invoked when the following conditions are met:

• The route named ”home” is matched.

• The view name resulting from traversal is another.

• The context resource is any object.

For instance, if the URL http://example.com/one/two/a/another is provided to an applica-


tion that uses the previously mentioned resource tree, the mypackage.views.another_view view
callable will be called instead of the mypackage.views.myview view callable because the view name
will be another instead of the empty string.

More complicated matching can be composed. All arguments to route configuration statements and view
configuration statements are supported in hybrid applications (such as predicate arguments).

624 Contents
The Pyramid Web Framework, Version 1.9.4

Using the traverse Argument in a Route Definition

Rather than using the *traverse remainder marker in a pattern, you can use the traverse argument
to the add_route() method.

When you use the *traverse remainder marker, the traversal path is limited to being the remainder
segments of a request URL when a route matches. However, when you use the traverse argument or
attribute, you have more control over how to compose a traversal path.

Here’s a use of the traverse pattern in a call to add_route():

1 config.add_route('abc', '/articles/{article}/edit',
2 traverse='/{article}')

The syntax of the traverse argument is the same as it is for pattern.

If, as above, the pattern provided is /articles/{article}/edit, and the traverse argument
provided is /{article}, when a request comes in that causes the route to match in such a way that the
article match value is 1 (when the request URI is /articles/1/edit), the traversal path will be
generated as /1. This means that the root object’s __getitem__ will be called with the name 1 during
the traversal phase. If the 1 object exists, it will become the context of the request. The Traversal chapter
has more information about traversal.

If the traversal path contains segment marker names which are not present in the pattern argument, a
runtime error will occur. The traverse pattern should not contain segment markers that do not exist in
the path.

Note that the traverse argument is ignored when attached to a route that has a *traverse remainder
marker in its pattern.

Traversal will begin at the root object implied by this route (either the global root, or the object returned
by the factory associated with this route).

Making Global Views Match

By default, only view configurations that mention a route_name will be found during view lookup when
a route that has a *traverse in its pattern matches. You can allow views without a route_name
attribute to match a route by adding the use_global_views flag to the route definition. For example,
the myproject.views.bazbuz view below will be found if the route named abc below is matched
and the PATH_INFO is /abc/bazbuz, even though the view configuration statement does not have the
route_name="abc" attribute.

0.3. Narrative Documentation 625


The Pyramid Web Framework, Version 1.9.4

1 config.add_route('abc', '/abc/*traverse', use_global_views=True)


2 config.add_view('myproject.views.bazbuz', name='bazbuz')

Using *subpath in a Route Pattern

There are certain extremely rare cases when you’d like to influence the traversal subpath when a route
matches without actually performing traversal. For instance, the pyramid.wsgi.wsgiapp2() dec-
orator and the pyramid.static.static_view helper attempt to compute PATH_INFO from the
request’s subpath when its use_subpath argument is True, so it’s useful to be able to influence this
value.

When *subpath exists in a pattern, no path is actually traversed, but the traversal algorithm will return
a subpath list implied by the capture value of *subpath. You’ll see this pattern most commonly in route
declarations that look like this:

1 from pyramid.static import static_view


2

3 www = static_view('mypackage:static', use_subpath=True)


4

5 config.add_route('static', '/static/*subpath')
6 config.add_view(www, route_name='static')

mypackage.views.www is an instance of pyramid.static.static_view. This effectively


tells the static helper to traverse everything in the subpath as a filename.

Generating Hybrid URLs

New in version 1.5.

The pyramid.request.Request.resource_url() method and the pyramid.request.


Request.resource_path() method both accept optional keyword arguments that make it easier
to generate route-prefixed URLs that contain paths to traversal resources: route_name, route_kw,
and route_remainder_name.

Any route that has a pattern that contains a *remainder pattern (any stararg remainder pattern, such as
*traverse, *subpath, or *fred) can be used as the target name for request.resource_url(.
.., route_name=) and request.resource_path(..., route_name=).

For example, let’s imagine you have a route defined in your Pyramid application like so:

626 Contents
The Pyramid Web Framework, Version 1.9.4

config.add_route('mysection', '/mysection*traverse')

If you’d like to generate the URL http://example.com/mysection/a/, you can use the following
incantation, assuming that the variable a below points to a resource that is a child of the root with a
__name__ of a:

request.resource_url(a, route_name='mysection')

You can generate only the path portion /mysection/a/ assuming the same:

request.resource_path(a, route_name='mysection')

The path is virtual host aware, so if the X-Vhm-Root environment variable is present in the request, and
it’s set to /a, the above call to request.resource_url would generate http://example.com/
mysection/, and the above call to request.resource_path would generate /mysection/.
See Virtual Root Support for more information.

If the route you’re trying to use needs simple dynamic part values to be filled in to succesfully generate the
URL, you can pass these as the route_kw argument to resource_url and resource_path. For
example, assuming that the route definition is like so:

config.add_route('mysection', '/{id}/mysection*traverse')

You can pass route_kw in to fill in {id} above:

request.resource_url(a, route_name='mysection', route_kw={'id':'1'})

If you pass route_kw but do not pass route_name, route_kw will be ignored.

By default this feature works by calling route_url under the hood, and passing the value of the resource
path to that function as traverse. If your route has a different *stararg remainder name (such as
*subpath), you can tell resource_url or resource_path to use that instead of traverse by
passing route_remainder_name. For example, if you have the following route:

config.add_route('mysection', '/mysection*subpath')

You can fill in the *subpath value using resource_url by doing:

0.3. Narrative Documentation 627


The Pyramid Web Framework, Version 1.9.4

request.resource_path(a, route_name='mysection',
route_remainder_name='subpath')

If you pass route_remainder_name but do not pass route_name, route_remainder_name


will be ignored.

If you try to use resource_path or resource_url when the route_name argument points at a
route that does not have a remainder stararg, an error will not be raised, but the generated URL will not
contain any remainder information either.

All other values that are normally passable to resource_path and resource_url (such as query,
anchor, host, port, and positional elements) work as you might expect in this configuration.

Note that this feature is incompatible with the __resource_url__ feature (see Overriding Resource
URL Generation) implemented on resource objects. Any __resource_url__ supplied by your re-
source will be ignored when you pass route_name.

0.3.30 Invoking a Subrequest

New in version 1.4.

Pyramid allows you to invoke a subrequest at any point during the processing of a request. Invoking a
subrequest allows you to obtain a response object from a view callable within your Pyramid application
while you’re executing a different view callable within the same application.

Here’s an example application which uses a subrequest:

1 from wsgiref.simple_server import make_server


2 from pyramid.config import Configurator
3 from pyramid.request import Request
4

5 def view_one(request):
6 subreq = Request.blank('/view_two')
7 response = request.invoke_subrequest(subreq)
8 return response
9

10 def view_two(request):
11 request.response.body = 'This came from view_two'
12 return request.response
(continues on next page)

628 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


13

14 if __name__ == '__main__':
15 config = Configurator()
16 config.add_route('one', '/view_one')
17 config.add_route('two', '/view_two')
18 config.add_view(view_one, route_name='one')
19 config.add_view(view_two, route_name='two')
20 app = config.make_wsgi_app()
21 server = make_server('0.0.0.0', 8080, app)
22 server.serve_forever()

When /view_one is visted in a browser, the text printed in the browser pane will be This
came from view_two. The view_one view used the pyramid.request.Request.
invoke_subrequest() API to obtain a response from another view (view_two) within the same
application when it executed. It did so by constructing a new request that had a URL that it knew would
match the view_two view registration, and passed that new request along to pyramid.request.
Request.invoke_subrequest(). The view_two view callable was invoked, and it returned a re-
sponse. The view_one view callable then simply returned the response it obtained from the view_two
view callable.

Note that it doesn’t matter if the view callable invoked via a subrequest actually returns a literal
Response object. Any view callable that uses a renderer or which returns an object that can be
interpreted by a response adapter when found and invoked via pyramid.request.Request.
invoke_subrequest() will return a Response object:

1 from wsgiref.simple_server import make_server


2 from pyramid.config import Configurator
3 from pyramid.request import Request
4

5 def view_one(request):
6 subreq = Request.blank('/view_two')
7 response = request.invoke_subrequest(subreq)
8 return response
9

10 def view_two(request):
11 return 'This came from view_two'
12

13 if __name__ == '__main__':
14 config = Configurator()
15 config.add_route('one', '/view_one')
16 config.add_route('two', '/view_two')
(continues on next page)

0.3. Narrative Documentation 629


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


17 config.add_view(view_one, route_name='one')
18 config.add_view(view_two, route_name='two', renderer='string')
19 app = config.make_wsgi_app()
20 server = make_server('0.0.0.0', 8080, app)
21 server.serve_forever()

Even though the view_two view callable returned a string, it was invoked in such a way that the string
renderer associated with the view registration that was found turned it into a ”real” response object for
consumption by view_one.

Being able to unconditionally obtain a response object by invoking a view callable indirectly is the main
advantage to using pyramid.request.Request.invoke_subrequest() instead of simply im-
porting a view callable and executing it directly. Note that there’s not much advantage to invoking a view
using a subrequest if you can invoke a view callable directly. Subrequests are slower and are less conve-
nient if you actually do want just the literal information returned by a function that happens to be a view
callable.

Note that, by default, if a view callable invoked by a subrequest raises an exception, the exception will be
raised to the caller of invoke_subrequest() even if you have a exception view configured:

1 from wsgiref.simple_server import make_server


2 from pyramid.config import Configurator
3 from pyramid.request import Request
4

5 def view_one(request):
6 subreq = Request.blank('/view_two')
7 response = request.invoke_subrequest(subreq)
8 return response
9

10 def view_two(request):
11 raise ValueError('foo')
12

13 def excview(request):
14 request.response.body = b'An exception was raised'
15 request.response.status_int = 500
16 return request.response
17

18 if __name__ == '__main__':
19 config = Configurator()
20 config.add_route('one', '/view_one')
(continues on next page)

630 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


21 config.add_route('two', '/view_two')
22 config.add_view(view_one, route_name='one')
23 config.add_view(view_two, route_name='two', renderer='string')
24 config.add_view(excview, context=Exception)
25 app = config.make_wsgi_app()
26 server = make_server('0.0.0.0', 8080, app)
27 server.serve_forever()

When we run the above code and visit /view_one in a browser, the excview exception view will not
be executed. Instead, the call to invoke_subrequest() will cause a ValueError exception to be
raised and a response will never be generated. We can change this behavior; how to do so is described
below in our discussion of the use_tweens argument.

Subrequests with Tweens

The pyramid.request.Request.invoke_subrequest() API accepts two arguments: a re-


quired positional argument request, and an optional keyword argument use_tweens which defaults
to False.

The request object passed to the API must be an object that implements the Pyramid request interface
(such as a pyramid.request.Request instance). If use_tweens is True, the request will be
sent to the tween in the tween stack closest to the request ingress. If use_tweens is False, the request
will be sent to the main router handler, and no tweens will be invoked.

In the example above, the call to invoke_subrequest() will always raise an exception. This is
because it’s using the default value for use_tweens, which is False. Alternatively, you can pass
use_tweens=True to ensure that it will convert an exception to a Response if an exception view is
configured, instead of raising the exception. This is because exception views are called by the exception
view tween as described in Custom Exception Views when any view raises an exception.

We can cause the subrequest to be run through the tween stack by passing use_tweens=True to the
call to invoke_subrequest(), like this:

1 from wsgiref.simple_server import make_server


2 from pyramid.config import Configurator
3 from pyramid.request import Request
4

5 def view_one(request):
6 subreq = Request.blank('/view_two')
(continues on next page)

0.3. Narrative Documentation 631


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


7 response = request.invoke_subrequest(subreq, use_tweens=True)
8 return response
9

10 def view_two(request):
11 raise ValueError('foo')
12

13 def excview(request):
14 request.response.body = b'An exception was raised'
15 request.response.status_int = 500
16 return request.response
17

18 if __name__ == '__main__':
19 config = Configurator()
20 config.add_route('one', '/view_one')
21 config.add_route('two', '/view_two')
22 config.add_view(view_one, route_name='one')
23 config.add_view(view_two, route_name='two', renderer='string')
24 config.add_view(excview, context=Exception)
25 app = config.make_wsgi_app()
26 server = make_server('0.0.0.0', 8080, app)
27 server.serve_forever()

In the above case, the call to request.invoke_subrequest(subreq) will not raise an exception.
Instead, it will retrieve a ”500” response from the attempted invocation of view_two, because the tween
which invokes an exception view to generate a response is run, and therefore excview is executed.

This is one of the major differences between specifying the use_tweens=True and
use_tweens=False arguments to invoke_subrequest(). use_tweens=True may
also imply invoking a transaction commit or abort for the logic executed in the subrequest if you’ve got
pyramid_tm in the tween list, injecting debug HTML if you’ve got pyramid_debugtoolbar in
the tween list, and other tween-related side effects as defined by your particular tween list.

The invoke_subrequest() function also unconditionally does the following:

• It manages the threadlocal stack so that get_current_request() and


get_current_registry() work during a request (they will return the subrequest instead of
the original request).

• It adds a registry attribute and an invoke_subrequest attribute (a callable) to the request


object to which it is handed.

632 Contents
The Pyramid Web Framework, Version 1.9.4

• It sets request extensions (such as those added via add_request_method() or


set_request_property()) on the subrequest object passed as request.

• It causes a NewRequest event to be sent at the beginning of request processing.

• It causes a ContextFound event to be sent when a context resource is found.

• It ensures that the user implied by the request passed in has the necessary authorization to invoke
the view callable before calling it.

• It calls any response callback functions defined within the subrequest’s lifetime if a response is
obtained from the Pyramid application.

• It causes a NewResponse event to be sent if a response is obtained.

• It calls any finished callback functions defined within the subrequest’s lifetime.

The invocation of a subrequest has more or less exactly the same effect as the invocation of a
request received by the Pyramid router from a web client when use_tweens=True. When
use_tweens=False, the tweens are skipped but all the other steps take place.

It’s a poor idea to use the original request object as an argument to invoke_subrequest().
You should construct a new request instead as demonstrated in the above example, using pyramid.
request.Request.blank(). Once you’ve constructed a request object, you’ll need to massage it
to match the view callable that you’d like to be executed during the subrequest. This can be done by ad-
justing the subrequest’s URL, its headers, its request method, and other attributes. The documentation for
pyramid.request.Request exposes the methods you should call and attributes you should set on
the request that you create, then massage it into something that will actually match the view you’d like to
call via a subrequest.

We’ve demonstrated use of a subrequest from within a view callable, but you can use the
invoke_subrequest() API from within a tween or an event handler as well. Even though you can
do it, it’s usually a poor idea to invoke invoke_subrequest() from within a tween, because tweens
already, by definition, have access to a function that will cause a subrequest (they are passed a handle
function). It’s fine to invoke invoke_subrequest() from within an event handler, however.

0.3. Narrative Documentation 633


The Pyramid Web Framework, Version 1.9.4

Invoking an Exception View

New in version 1.7.

Pyramid apps may define exception views which can handle any raised exceptions that escape from your
code while processing a request. By default an unhandled exception will be caught by the EXCVIEW tween,
which will then lookup an exception view that can handle the exception type, generating an appropriate
error response.

In Pyramid 1.7 the pyramid.request.Request.invoke_exception_view() was intro-


duced, allowing a user to invoke an exception view while manually handling an exception. This can be
useful in a few different circumstances:

• Manually handling an exception losing the current call stack or flow.

• Handling exceptions outside of the context of the EXCVIEW tween. The tween only covers certain
parts of the request processing pipeline (See Request Processing). There are also some corner cases
where an exception can be raised that will still bubble up to middleware, and possibly to the web
server in which case a generic 500 Internal Server Error will be returned to the client.

Below is an example usage of pyramid.request.Request.invoke_exception_view():

1 def foo(request):
2 try:
3 some_func_that_errors()
4 return response
5 except Exception:
6 response = request.invoke_exception_view()
7 if response is not None:
8 return response
9 else:
10 # there is no exception view for this exception, simply
11 # re-raise and let someone else handle it
12 raise

Please note that in most cases you do not need to write code like this, and you may rely on the EXCVIEW
tween to handle this for you.

0.3.31 Using Hooks

”Hooks” can be used to influence the behavior of the Pyramid framework in various ways.

634 Contents
The Pyramid Web Framework, Version 1.9.4

Changing the Not Found View

When Pyramid can’t map a URL to view code, it invokes a Not Found View, which is a view callable. The
default Not Found View can be overridden through application configuration.

If your application uses imperative configuration, you can replace the Not Found View by using the
pyramid.config.Configurator.add_notfound_view() method:

1 def notfound(request):
2 return Response('Not Found', status='404 Not Found')
3

4 def main(globals, **settings):


5 config = Configurator()
6 config.add_notfound_view(notfound)

The Not Found View callable is a view callable like any other.

If your application instead uses pyramid.view.view_config decorators and a scan, you can replace
the Not Found View by using the pyramid.view.notfound_view_config decorator:

1 from pyramid.view import notfound_view_config


2

3 @notfound_view_config()
4 def notfound(request):
5 return Response('Not Found', status='404 Not Found')
6

7 def main(globals, **settings):


8 config = Configurator()
9 config.scan()

This does exactly what the imperative example above showed.

Your application can define multiple Not Found Views if necessary. Both pyramid.config.
Configurator.add_notfound_view() and pyramid.view.notfound_view_config
take most of the same arguments as pyramid.config.Configurator.add_view and
pyramid.view.view_config, respectively. This means that Not Found Views can carry predicates
limiting their applicability. For example:

0.3. Narrative Documentation 635


The Pyramid Web Framework, Version 1.9.4

1 from pyramid.view import notfound_view_config


2

3 @notfound_view_config(request_method='GET')
4 def notfound_get(request):
5 return Response('Not Found during GET', status='404 Not Found')
6

7 @notfound_view_config(request_method='POST')
8 def notfound_post(request):
9 return Response('Not Found during POST', status='404 Not Found')
10

11 def main(globals, **settings):


12 config = Configurator()
13 config.scan()

The notfound_get view will be called when a view could not be found and the request method was
GET. The notfound_post view will be called when a view could not be found and the request method
was POST.

Like any other view, the Not Found View must accept at least a request parameter, or both context
and request. The request is the current request representing the denied action. The context (if
used in the call signature) will be the instance of the HTTPNotFound exception that caused the view to
be called.

Both pyramid.config.Configurator.add_notfound_view() and pyramid.view.


notfound_view_config can be used to automatically redirect requests to slash-appended routes.
See Redirecting to Slash-Appended Routes for examples.

Here’s some sample code that implements a minimal Not Found View callable:

1 from pyramid.httpexceptions import HTTPNotFound


2

3 def notfound(request):
4 return HTTPNotFound()

When a Not Found View callable is invoked, it is passed a request. The exception attribute of the
request will be an instance of the HTTPNotFound exception that caused the Not Found View to be called.
The value of request.exception.message will be a value explaining why the Not Found exception
was raised. This message has different values depending on whether the pyramid.debug_notfound
environment setting is true or false.

636 Contents
The Pyramid Web Framework, Version 1.9.4

When a Not Found View callable accepts an argument list as described in Alternate View Callable
Argument/Calling Conventions, the context passed as the first argument to the view callable will be
the HTTPNotFound exception instance. If available, the resource context will still be available as
request.context.

The Not Found View callables are only invoked when a HTTPNotFound exception is raised. If
the exception is returned from a view then it will be treated as a regular response object and it will not
trigger the custom view.

Changing the Forbidden View

When Pyramid can’t authorize execution of a view based on the authorization policy in use, it invokes a
forbidden view. The default forbidden response has a 403 status code and is very plain, but the view which
generates it can be overridden as necessary.

The forbidden view callable is a view callable like any other. The view configuration which
causes it to be a ”forbidden” view consists of using the pyramid.config.Configurator.
add_forbidden_view() API or the pyramid.view.forbidden_view_config decorator.

For example, you can add a forbidden view by using the pyramid.config.Configurator.
add_forbidden_view() method to register a forbidden view:

1 def forbidden(request):
2 return Response('forbidden')
3

4 def main(globals, **settings):


5 config = Configurator()
6 config.add_forbidden_view(forbidden)

If instead you prefer to use decorators and a scan, you can use the pyramid.view.
forbidden_view_config decorator to mark a view callable as a forbidden view:

0.3. Narrative Documentation 637


The Pyramid Web Framework, Version 1.9.4

1 from pyramid.view import forbidden_view_config


2

3 @forbidden_view_config()
4 def forbidden(request):
5 return Response('forbidden')
6

7 def main(globals, **settings):


8 config = Configurator()
9 config.scan()

Like any other view, the forbidden view must accept at least a request parameter, or both context and
request. If a forbidden view callable accepts both context and request, the HTTP Exception is
passed as context. The context as found by the router when the view was denied (which you normally
would expect) is available as request.context. The request is the current request representing
the denied action.

Here’s some sample code that implements a minimal forbidden view:

1 from pyramid.view import view_config


2 from pyramid.response import Response
3

4 def forbidden_view(request):
5 return Response('forbidden')

When a forbidden view callable is invoked, it is passed a request. The exception attribute
of the request will be an instance of the HTTPForbidden exception that caused the forbidden view
to be called. The value of request.exception.message will be a value explaining why the for-
bidden exception was raised, and request.exception.result will be extended information about
the forbidden exception. These messages have different values depending on whether the pyramid.
debug_authorization environment setting is true or false.

The forbidden view callables are only invoked when a HTTPForbidden exception is raised. If
the exception is returned from a view then it will be treated as a regular response object and it will not
trigger the custom view.

638 Contents
The Pyramid Web Framework, Version 1.9.4

Changing the Request Factory

Whenever Pyramid handles a request from a WSGI server, it creates a request object based on the WSGI
environment it has been passed. By default, an instance of the pyramid.request.Request class is
created to represent the request object.

The class (a.k.a., ”factory”) that Pyramid uses to create a request object instance can be changed by passing
a request_factory argument to the constructor of the configurator. This argument can be either a
callable or a dotted Python name representing a callable.

1 from pyramid.request import Request


2

3 class MyRequest(Request):
4 pass
5

6 config = Configurator(request_factory=MyRequest)

If you’re doing imperative configuration, and you’d rather do it after you’ve already con-
structed a configurator, it can also be registered via the pyramid.config.Configurator.
set_request_factory() method:

1 from pyramid.config import Configurator


2 from pyramid.request import Request
3

4 class MyRequest(Request):
5 pass
6

7 config = Configurator()
8 config.set_request_factory(MyRequest)

Adding Methods or Properties to a Request Object

New in version 1.4.

Since each Pyramid application can only have one request factory, changing the request factory is not that
extensible, especially if you want to build composable features (e.g., Pyramid add-ons and plugins).

A lazy property can be registered to the request object via the pyramid.config.Configurator.
add_request_method() API. This allows you to specify a callable that will be available on the re-
quest object, but will not actually execute the function until accessed.

0.3. Narrative Documentation 639


The Pyramid Web Framework, Version 1.9.4

This will silently override methods and properties from request factory that have the same name.

1 from pyramid.config import Configurator


2

3 def total(request, *args):


4 return sum(args)
5

6 def prop(request):
7 print("getting the property")
8 return "the property"
9

10 config = Configurator()
11 config.add_request_method(total)
12 config.add_request_method(prop, reify=True)

In the above example, total is added as a method. However, prop is added as a property and its result is
cached per-request by setting reify=True. This way, we eliminate the overhead of running the function
multiple times.

>>> request.total(1, 2, 3)
6
>>> request.prop
getting the property
'the property'
>>> request.prop
'the property'

To not cache the result of request.prop, set property=True instead of reify=True.

Here is an example of passing a class to Configurator.add_request_method:

1 from pyramid.config import Configurator


2 from pyramid.decorator import reify
3

4 class ExtraStuff(object):
5

6 def __init__(self, request):


7 self.request = request
(continues on next page)

640 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


8

9 def total(self, *args):


10 return sum(args)
11

12 # use @property if you don't want to cache the result


13 @reify
14 def prop(self):
15 print("getting the property")
16 return "the property"
17

18 config = Configurator()
19 config.add_request_method(ExtraStuff, 'extra', reify=True)

We attach and cache an object named extra to the request object.

>>> request.extra.total(1, 2, 3)
6
>>> request.extra.prop
getting the property
'the property'
>>> request.extra.prop
'the property'

Changing the Response Factory

New in version 1.6.

Whenever Pyramid returns a response from a view, it creates a response object. By default, an instance of
the pyramid.response.Response class is created to represent the response object.

The factory that Pyramid uses to create a response object instance can be changed by passing a pyramid.
interfaces.IResponseFactory argument to the constructor of the configurator. This argument
can be either a callable or a dotted Python name representing a callable.

The factory takes a single positional argument, which is a Request object. The argument may be None.

0.3. Narrative Documentation 641


The Pyramid Web Framework, Version 1.9.4

1 from pyramid.response import Response


2

3 class MyResponse(Response):
4 pass
5

6 config = Configurator(response_factory=lambda r: MyResponse())

If you’re doing imperative configuration and you’d rather do it after you’ve already con-
structed a configurator, it can also be registered via the pyramid.config.Configurator.
set_response_factory() method:

1 from pyramid.config import Configurator


2 from pyramid.response import Response
3

4 class MyResponse(Response):
5 pass
6

7 config = Configurator()
8 config.set_response_factory(lambda r: MyResponse())

Using the Before Render Event

Subscribers to the pyramid.events.BeforeRender event may introspect and modify the set of
renderer globals before they are passed to a renderer. This event object iself has a dictionary-like interface
that can be used for this purpose. For example:

1 from pyramid.events import subscriber


2 from pyramid.events import BeforeRender
3

4 @subscriber(BeforeRender)
5 def add_global(event):
6 event['mykey'] = 'foo'

An object of this type is sent as an event just before a renderer is invoked.

If a subscriber attempts to add a key that already exists in the renderer globals dictionary, a KeyError is
raised. This limitation is enforced because event subscribers do not possess any relative ordering. The set
of keys added to the renderer globals dictionary by all pyramid.events.BeforeRender subscribers
and renderer globals factories must be unique.

642 Contents
The Pyramid Web Framework, Version 1.9.4

The dictionary returned from the view is accessible through the rendering_val attribute of a
BeforeRender event.

Suppose you return {'mykey': 'somevalue', 'mykey2': 'somevalue2'} from your view
callable, like so:

1 from pyramid.view import view_config


2

3 @view_config(renderer='some_renderer')
4 def myview(request):
5 return {'mykey': 'somevalue', 'mykey2': 'somevalue2'}

rendering_val can be used to access these values from the BeforeRender object:

1 from pyramid.events import subscriber


2 from pyramid.events import BeforeRender
3

4 @subscriber(BeforeRender)
5 def read_return(event):
6 # {'mykey': 'somevalue'} is returned from the view
7 print(event.rendering_val['mykey'])

See the API documentation for the BeforeRender event interface at pyramid.interfaces.
IBeforeRender.

Using Response Callbacks

Unlike many other web frameworks, Pyramid does not eagerly create a global response object. Adding a
response callback allows an application to register an action to be performed against whatever response
object is returned by a view, usually in order to mutate the response.

The pyramid.request.Request.add_response_callback() method is used to register a


response callback.

A response callback is a callable which accepts two positional parameters: request and response.
For example:

0.3. Narrative Documentation 643


The Pyramid Web Framework, Version 1.9.4

1 def cache_callback(request, response):


2 """Set the cache_control max_age for the response"""
3 if request.exception is not None:
4 response.cache_control.max_age = 360
5 request.add_response_callback(cache_callback)

No response callback is called if an unhandled exception happens in application code, or if the response
object returned by a view callable is invalid. Response callbacks are, however, invoked when a exception
view is rendered successfully. In such a case, the request.exception attribute of the request when
it enters a response callback will be an exception object instead of its default value of None.

Response callbacks are called in the order they’re added (first-to-most-recently-added). All response call-
backs are called before the NewResponse event is sent. Errors raised by response callbacks are not
handled specially. They will be propagated to the caller of the Pyramid router application.

A response callback has a lifetime of a single request. If you want a response callback to happen as the
result of every request, you must re-register the callback into every new request (perhaps within a subscriber
of a NewRequest event).

Using Finished Callbacks

A finished callback is a function that will be called unconditionally by the Pyramid router at the very
end of request processing. A finished callback can be used to perform an action at the end of a request
unconditionally.

The pyramid.request.Request.add_finished_callback() method is used to register a


finished callback.

A finished callback is a callable which accepts a single positional parameter: request. For example:

1 import logging
2

3 log = logging.getLogger(__name__)
4

5 def log_callback(request):
6 """Log information at the end of request"""
7 log.debug('Request is finished.')
8 request.add_finished_callback(log_callback)

644 Contents
The Pyramid Web Framework, Version 1.9.4

Finished callbacks are called in the order they’re added (first-to-most-recently-added). Finished callbacks
(unlike a response callback) are always called, even if an exception happens in application code that pre-
vents a response from being generated.

The set of finished callbacks associated with a request are called very late in the processing of that request;
they are essentially the very last thing called by the router before a request ”ends”. They are called after
response processing has already occurred in a top-level finally: block within the router request pro-
cessing code. As a result, mutations performed to the request provided to a finished callback will have
no meaningful effect, because response processing will have already occurred, and the request’s scope will
expire almost immediately after all finished callbacks have been processed.

Errors raised by finished callbacks are not handled specially. They will be propagated to the caller of the
Pyramid router application.

A finished callback has a lifetime of a single request. If you want a finished callback to happen as the result
of every request, you must re-register the callback into every new request (perhaps within a subscriber of
a NewRequest event).

Changing the Traverser

The default traversal algorithm that Pyramid uses is explained in The Traversal Algorithm. Though it is
rarely necessary, this default algorithm can be swapped out selectively for a different traversal pattern via
configuration.

1 from pyramid.config import Configurator


2 from myapp.traversal import Traverser
3 config = Configurator()
4 config.add_traverser(Traverser)

In the example above, myapp.traversal.Traverser is assumed to be a class that implements the


following interface:

1 class Traverser(object):
2 def __init__(self, root):
3 """ Accept the root object returned from the root factory ""
,→"

5 def __call__(self, request):


6 """ Return a dictionary with (at least) the keys ``root``,
7 ``context``, ``view_name``, ``subpath``, ``traversed``,
(continues on next page)

0.3. Narrative Documentation 645


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


8 ``virtual_root``, and ``virtual_root_path``. These values␣
are
,→

9 typically the result of a resource tree traversal. ``root``


10 is the physical root object, ``context`` will be a resource
11 object, ``view_name`` will be the view name used (a Unicode
12 name), ``subpath`` will be a sequence of Unicode names that
13 followed the view name but were not traversed, ``traversed``
14 will be a sequence of Unicode names that were traversed
15 (including the virtual root path, if any) ``virtual_root``
16 will be a resource object representing the virtual root (or␣
the
,→

17 physical root if traversal was not performed), and


18 ``virtual_root_path`` will be a sequence representing the
19 virtual root path (a sequence of Unicode names) or None if
20 traversal was not performed.
21

22 Extra keys for special purpose functionality can be added as


23 necessary.
24

25 All values returned in the dictionary will be made available


26 as attributes of the ``request`` object.
27 """

More than one traversal algorithm can be active at the same time. For instance, if your root factory returns
more than one type of object conditionally, you could claim that an alternative traverser adapter is ”for”
only one particular class or interface. When the root factory returned an object that implemented that
class or interface, a custom traverser would be used. Otherwise the default traverser would be used. For
example:

1 from myapp.traversal import Traverser


2 from myapp.resources import MyRoot
3 from pyramid.config import Configurator
4 config = Configurator()
5 config.add_traverser(Traverser, MyRoot)

If the above stanza was added to a Pyramid __init__.py file’s main function, Pyramid would use
the myapp.traversal.Traverser only when the application root factory returned an instance of
the myapp.resources.MyRoot object. Otherwise it would use the default Pyramid traverser to do
traversal.

646 Contents
The Pyramid Web Framework, Version 1.9.4

Changing How pyramid.request.Request.resource_url() Generates a URL

When you add a traverser as described in Changing the Traverser, it’s often convenient to continue to
use the pyramid.request.Request.resource_url() API. However, since the way traversal
is done will have been modified, the URLs it generates by default may be incorrect when used against
resources derived from your custom traverser.

If you’ve added a traverser, you can change how resource_url() generates a URL
for a specific type of resource by adding a call to pyramid.config.Configurator.
add_resource_url_adapter().

For example:

1 from myapp.traversal import ResourceURLAdapter


2 from myapp.resources import MyRoot
3

4 config.add_resource_url_adapter(ResourceURLAdapter, MyRoot)

In the above example, the myapp.traversal.ResourceURLAdapter class will be used to provide


services to resource_url() any time the resource passed to resource_url is of the class myapp.
resources.MyRoot. The resource_iface argument MyRoot represents the type of interface that
must be possessed by the resource for this resource url factory to be found. If the resource_iface
argument is omitted, this resource URL adapter will be used for all resources.

The API that must be implemented by a class that provides IResourceURL is as follows:

1 class MyResourceURL(object):
2 """ An adapter which provides the virtual and physical paths of␣
,→a

3 resource
4 """
5 def __init__(self, resource, request):
6 """ Accept the resource and request and set self.physical_
,→path and

7 self.virtual_path """
8 self.virtual_path = some_function_of(resource, request)
9 self.virtual_path_tuple = some_function_of(resource,␣
,→request)

10 self.physical_path = some_other_function_of(resource,␣
,→request)

11 self.physical_path_tuple = some_function_of(resource,␣
,→request)

0.3. Narrative Documentation 647


The Pyramid Web Framework, Version 1.9.4

The default context URL generator is available for perusal as the class pyramid.traversal.
ResourceURL in the traversal module of the Pylons GitHub Pyramid repository.

See pyramid.config.Configurator.add_resource_url_adapter() for more informa-


tion.

Changing How Pyramid Treats View Responses

New in version 1.1.

It is possible to control how Pyramid treats the result of calling a view callable on a per-type basis by
using a hook involving pyramid.config.Configurator.add_response_adapter() or the
response_adapter decorator.

Pyramid, in various places, adapts the result of calling a view callable to the IResponse interface
to ensure that the object returned by the view callable is a ”true” response object. The vast majority
of time, the result of this adaptation is the result object itself, as view callables written by ”civilians”
who read the narrative documentation contained in this manual will always return something that imple-
ments the IResponse interface. Most typically, this will be an instance of the pyramid.response.
Response class or a subclass. If a civilian returns a non-Response object from a view callable that isn’t
configured to use a renderer, they will typically expect the router to raise an error. However, you can hook
Pyramid in such a way that users can return arbitrary values from a view callable by providing an adapter
which converts the arbitrary return value into something that implements IResponse.

For example, if you’d like to allow view callables to return bare string objects (without requiring a renderer
to convert a string to a response object), you can register an adapter which converts the string to a Response:

1 from pyramid.response import Response


2

3 def string_response_adapter(s):
4 response = Response(s)
5 return response
6

7 # config is an instance of pyramid.config.Configurator


8

9 config.add_response_adapter(string_response_adapter, str)

Likewise, if you want to be able to return a simplified kind of response object from view callables, you can
use the IResponse hook to register an adapter to the more complex IResponse interface:

648 Contents
The Pyramid Web Framework, Version 1.9.4

1 from pyramid.response import Response


2

3 class SimpleResponse(object):
4 def __init__(self, body):
5 self.body = body
6

7 def simple_response_adapter(simple_response):
8 response = Response(simple_response.body)
9 return response
10

11 # config is an instance of pyramid.config.Configurator


12

13 config.add_response_adapter(simple_response_adapter, SimpleResponse)

If you want to implement your own Response object instead of using the pyramid.response.
Response object in any capacity at all, you’ll have to make sure that the object implements every at-
tribute and method outlined in pyramid.interfaces.IResponse and you’ll have to ensure that it
uses zope.interface.implementer(IResponse) as a class decorator.

1 from pyramid.interfaces import IResponse


2 from zope.interface import implementer
3

4 @implementer(IResponse)
5 class MyResponse(object):
6 # ... an implementation of every method and attribute
7 # documented in IResponse should follow ...

When an alternate response object implementation is returned by a view callable, if that object asserts
that it implements IResponse (via zope.interface.implementer(IResponse)) , an adapter
needn’t be registered for the object; Pyramid will use it directly.

An IResponse adapter for webob.Response (as opposed to pyramid.response.Response) is


registered by Pyramid by default at startup time, as by their nature, instances of this class (and instances of
subclasses of the class) will natively provide IResponse. The adapter registered for webob.Response
simply returns the response object.

Instead of using pyramid.config.Configurator.add_response_adapter(), you can use


the pyramid.response.response_adapter decorator:

0.3. Narrative Documentation 649


The Pyramid Web Framework, Version 1.9.4

1 from pyramid.response import Response


2 from pyramid.response import response_adapter
3

4 @response_adapter(str)
5 def string_response_adapter(s):
6 response = Response(s)
7 return response

The above example, when scanned, has the same effect as:

config.add_response_adapter(string_response_adapter, str)

The response_adapter decorator will have no effect until activated by a scan.

Using a View Mapper

The default calling conventions for view callables are documented in the Views chapter. You can change
the way users define view callables by employing a view mapper.

A view mapper is an object that accepts a set of keyword arguments and which returns a callable. The
returned callable is called with the view callable object. The returned callable should itself return another
callable which can be called with the ”internal calling protocol” (context, request).

You can use a view mapper in a number of ways:

• by setting a __view_mapper__ attribute (which is the view mapper object) on the view callable
itself

• by passing the mapper object to pyramid.config.Configurator.add_view() (or its


declarative and decorator equivalents) as the mapper argument

• by registering a default view mapper

Here’s an example of a view mapper that emulates (somewhat) a Pylons ”controller”. The mapper is
initialized with some keyword arguments. Its __call__ method accepts the view object (which will be
a class). It uses the attr keyword argument it is passed to determine which attribute should be used as an
action method. The wrapper method it returns accepts (context, request) and returns the result of
calling the action method with keyword arguments implied by the matchdict after popping the action out
of it. This somewhat emulates the Pylons style of calling action methods with routing parameters pulled
out of the route matching dict as keyword arguments.

650 Contents
The Pyramid Web Framework, Version 1.9.4

1 # framework
2

3 class PylonsControllerViewMapper(object):
4 def __init__(self, **kw):
5 self.kw = kw
6

7 def __call__(self, view):


8 attr = self.kw['attr']
9 def wrapper(context, request):
10 matchdict = request.matchdict.copy()
11 matchdict.pop('action', None)
12 inst = view(request)
13 meth = getattr(inst, attr)
14 return meth(**matchdict)
15 return wrapper
16

17 class BaseController(object):
18 __view_mapper__ = PylonsControllerViewMapper

A user might make use of these framework components like so:

1 # user application
2

3 from pyramid.response import Response


4 from pyramid.config import Configurator
5 import pyramid_handlers
6 from wsgiref.simple_server import make_server
7

8 class MyController(BaseController):
9 def index(self, id):
10 return Response(id)
11

12 if __name__ == '__main__':
13 config = Configurator()
14 config.include(pyramid_handlers)
15 config.add_handler('one', '/{id}', MyController, action='index')
16 config.add_handler('two', '/{action}/{id}', MyController)
17 server.make_server('0.0.0.0', 8080, config.make_wsgi_app())
18 server.serve_forever()

The pyramid.config.Configurator.set_view_mapper() method can be used to set a de-


fault view mapper (overriding the superdefault view mapper used by Pyramid itself).

0.3. Narrative Documentation 651


The Pyramid Web Framework, Version 1.9.4

A single view registration can use a view mapper by passing the mapper as the mapper argument to
add_view().

Registering Configuration Decorators

Decorators such as view_config don’t change the behavior of the functions or classes they’re deco-
rating. Instead when a scan is performed, a modified version of the function or class is registered with
Pyramid.

You may wish to have your own decorators that offer such behaviour. This is possible by using the Venusian
package in the same way that it is used by Pyramid.

By way of example, let’s suppose you want to write a decorator that registers the function it wraps with
a Zope Component Architecture ”utility” within the application registry provided by Pyramid. The ap-
plication registry and the utility inside the registry is likely only to be available once your application’s
configuration is at least partially completed. A normal decorator would fail as it would be executed before
the configuration had even begun.

However, using Venusian, the decorator could be written as follows:

1 import venusian
2 from mypackage.interfaces import IMyUtility
3

4 class registerFunction(object):
5

6 def __init__(self, path):


7 self.path = path
8

9 def register(self, scanner, name, wrapped):


10 registry = scanner.config.registry
11 registry.getUtility(IMyUtility).register(
12 self.path, wrapped)
13

14 def __call__(self, wrapped):


15 venusian.attach(wrapped, self.register)
16 return wrapped

This decorator could then be used to register functions throughout your code:

652 Contents
The Pyramid Web Framework, Version 1.9.4

1 @registerFunction('/some/path')
2 def my_function():
3 do_stuff()

However, the utility would only be looked up when a scan was performed, enabling you to set up the utility
in advance:

1 from zope.interface import implementer


2

3 from wsgiref.simple_server import make_server


4 from pyramid.config import Configurator
5 from mypackage.interfaces import IMyUtility
6

7 @implementer(IMyUtility)
8 class UtilityImplementation:
9

10 def __init__(self):
11 self.registrations = {}
12

13 def register(self, path, callable_):


14 self.registrations[path] = callable_
15

16 if __name__ == '__main__':
17 config = Configurator()
18 config.registry.registerUtility(UtilityImplementation())
19 config.scan()
20 app = config.make_wsgi_app()
21 server = make_server('0.0.0.0', 8080, app)
22 server.serve_forever()

For full details, please read the Venusian documentation.

Registering Tweens

New in version 1.2: Tweens

A tween (a contraction of the word ”between”) is a bit of code that sits between the Pyramid router’s main
request handling function and the upstream WSGI component that uses Pyramid as its ”app”. This is a
feature that may be used by Pyramid framework extensions to provide, for example, Pyramid-specific view

0.3. Narrative Documentation 653


The Pyramid Web Framework, Version 1.9.4

timing support bookkeeping code that examines exceptions before they are returned to the upstream WSGI
application. Tweens behave a bit like WSGI middleware, but they have the benefit of running in a context in
which they have access to the Pyramid request, response, and application registry, as well as the Pyramid
rendering machinery.

Creating a Tween

To create a tween, you must write a ”tween factory”. A tween factory must be a globally importable
callable which accepts two arguments: handler and registry. handler will be either the main
Pyramid request handling function or another tween. registry will be the Pyramid application registry
represented by this Configurator. A tween factory must return the tween (a callable object) when it is
called.

A tween is called with a single argument, request, which is the request created by Pyramid’s router
when it receives a WSGI request. A tween should return a response, usually the one generated by the
downstream Pyramid application.

You can write the tween factory as a simple closure-returning function:

1 def simple_tween_factory(handler, registry):


2 # one-time configuration code goes here
3

4 def simple_tween(request):
5 # code to be executed for each request before
6 # the actual application code goes here
7

8 response = handler(request)
9

10 # code to be executed for each request after


11 # the actual application code goes here
12

13 return response
14

15 return simple_tween

Alternatively, the tween factory can be a class with the __call__ magic method:

654 Contents
The Pyramid Web Framework, Version 1.9.4

1 class simple_tween_factory(object):
2 def __init__(self, handler, registry):
3 self.handler = handler
4 self.registry = registry
5

6 # one-time configuration code goes here


7

8 def __call__(self, request):


9 # code to be executed for each request before
10 # the actual application code goes here
11

12 response = self.handler(request)
13

14 # code to be executed for each request after


15 # the actual application code goes here
16

17 return response

You should avoid mutating any state on the tween instance. The tween is invoked once per request and any
shared mutable state needs to be carefully handled to avoid any race conditions.

The closure style performs slightly better and enables you to conditionally omit the tween from the request
processing pipeline (see the following timing tween example), whereas the class style makes it easier to
have shared mutable state and allows subclassing.

Here’s a complete example of a tween that logs the time spent processing each request:

1 # in a module named myapp.tweens


2

3 import time
4 from pyramid.settings import asbool
5 import logging
6

7 log = logging.getLogger(__name__)
8

9 def timing_tween_factory(handler, registry):


10 if asbool(registry.settings.get('do_timing')):
11 # if timing support is enabled, return a wrapper
12 def timing_tween(request):
13 start = time.time()
14 try:
(continues on next page)

0.3. Narrative Documentation 655


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


15 response = handler(request)
16 finally:
17 end = time.time()
18 log.debug('The request took %s seconds' %
19 (end - start))
20 return response
21 return timing_tween
22 # if timing support is not enabled, return the original
23 # handler
24 return handler

In the above example, the tween factory defines a timing_tween tween and returns it if
asbool(registry.settings.get('do_timing')) is true. It otherwise simply returns the
handler which it was given. The registry.settings attribute is a handle to the deployment set-
tings provided by the user (usually in an .ini file). In this case, if the user has defined a do_timing
setting and that setting is True, the user has said they want to do timing, so the tween factory returns the
timing tween; it otherwise just returns the handler it has been provided, preventing any timing.

The example timing tween simply records the start time, calls the downstream handler, logs the number of
seconds consumed by the downstream handler, and returns the response.

Registering an Implicit Tween Factory

Once you’ve created a tween factory, you can register it into the implicit tween chain using the pyramid.
config.Configurator.add_tween() method using its dotted Python name.

Here’s an example of registering a tween factory as an ”implicit” tween in a Pyramid application:

1 from pyramid.config import Configurator


2 config = Configurator()
3 config.add_tween('myapp.tweens.timing_tween_factory')

Note that you must use a dotted Python name as the first argument to pyramid.config.
Configurator.add_tween(); this must point at a tween factory. You cannot pass the tween fac-
tory object itself to the method: it must be dotted Python name that points to a globally importable
object. In the above example, we assume that a timing_tween_factory tween factory was de-
fined in a module named myapp.tweens, so the tween factory is importable as myapp.tweens.
timing_tween_factory.

656 Contents
The Pyramid Web Framework, Version 1.9.4

When you use pyramid.config.Configurator.add_tween(), you’re instructing the system


to use your tween factory at startup time unless the user has provided an explicit tween list in their config-
uration. This is what’s meant by an ”implicit” tween. A user can always elect to supply an explicit tween
list, reordering or disincluding implicitly added tweens. See Explicit Tween Ordering for more information
about explicit tween ordering.

If more than one call to pyramid.config.Configurator.add_tween() is made within a sin-


gle application configuration, the tweens will be chained together at application startup time. The first
tween factory added via add_tween will be called with the Pyramid exception view tween factory as
its handler argument, then the tween factory added directly after that one will be called with the result
of the first tween factory as its handler argument, and so on, ad infinitum until all tween factories have
been called. The Pyramid router will use the outermost tween produced by this chain (the tween generated
by the very last tween factory added) as its request handler function. For example:

1 from pyramid.config import Configurator


2

3 config = Configurator()
4 config.add_tween('myapp.tween_factory1')
5 config.add_tween('myapp.tween_factory2')

The above example will generate an implicit tween chain that looks like this:

INGRESS (implicit)
myapp.tween_factory2
myapp.tween_factory1
pyramid.tweens.excview_tween_factory (implicit)
MAIN (implicit)

Suggesting Implicit Tween Ordering

By default, as described above, the ordering of the chain is controlled entirely by the relative ordering of
calls to pyramid.config.Configurator.add_tween(). However, the caller of add_tween
can provide an optional hint that can influence the implicit tween chain ordering by supplying under or
over (or both) arguments to add_tween(). These hints are only used when an explicit tween ordering
is not used. See Explicit Tween Ordering for a description of how to set an explicit tween ordering.

Allowable values for under or over (or both) are:

• None (the default),

0.3. Narrative Documentation 657


The Pyramid Web Framework, Version 1.9.4

• a dotted Python name to a tween factory: a string representing the predicted dotted name of a tween
factory added in a call to add_tween in the same configuration session,

• one of the constants pyramid.tweens.MAIN, pyramid.tweens.INGRESS, or pyramid.


tweens.EXCVIEW , or

• an iterable of any combination of the above. This allows the user to specify fallbacks if the desired
tween is not included, as well as compatibility with multiple other tweens.

Effectively, over means ”closer to the request ingress than” and under means ”closer to the main Pyramid
application than”. You can think of an onion with outer layers over the inner layers, the application being
under all the layers at the center.

For example, the following call to add_tween() will attempt to place the tween factory represented by
myapp.tween_factory directly ”above” (in ptweens order) the main Pyramid request handler.

1 import pyramid.tweens
2

3 config.add_tween('myapp.tween_factory', over=pyramid.tweens.MAIN)

The above example will generate an implicit tween chain that looks like this:

INGRESS (implicit)
pyramid.tweens.excview_tween_factory (implicit)
myapp.tween_factory
MAIN (implicit)

Likewise, calling the following call to add_tween() will attempt to place this tween factory ”above”
the main handler but ”below” a separately added tween factory:

1 import pyramid.tweens
2

3 config.add_tween('myapp.tween_factory1',
4 over=pyramid.tweens.MAIN)
5 config.add_tween('myapp.tween_factory2',
6 over=pyramid.tweens.MAIN,
7 under='myapp.tween_factory1')

The above example will generate an implicit tween chain that looks like this:

658 Contents
The Pyramid Web Framework, Version 1.9.4

INGRESS (implicit)
pyramid.tweens.excview_tween_factory (implicit)
myapp.tween_factory1
myapp.tween_factory2
MAIN (implicit)

Specifying neither over nor under is equivalent to specifying under=INGRESS.

If all options for under (or over) cannot be found in the current configuration, it is an error. If some op-
tions are specified purely for compatibilty with other tweens, just add a fallback of MAIN or INGRESS. For
example, under=('someothertween', 'someothertween2', INGRESS). This constraint
will require the tween to be located under the someothertween tween, the someothertween2
tween, and INGRESS. If any of these is not in the current configuration, this constraint will only organize
itself based on the tweens that are present.

Explicit Tween Ordering

Implicit tween ordering is obviously only best-effort. Pyramid will attempt to provide an implicit order of
tweens as best it can using hints provided by calls to add_tween(). But because it’s only best-effort, if
very precise tween ordering is required, the only surefire way to get it is to use an explicit tween order. The
deploying user can override the implicit tween inclusion and ordering implied by calls to add_tween()
entirely by using the pyramid.tweens settings value. When used, this settings value must be a list of
Python dotted names which will override the ordering (and inclusion) of tween factories in the implicit
tween chain. For example:

1 [app:main]
2 use = egg:MyApp
3 pyramid.reload_templates = true
4 pyramid.debug_authorization = false
5 pyramid.debug_notfound = false
6 pyramid.debug_routematch = false
7 pyramid.debug_templates = true
8 pyramid.tweens = myapp.my_cool_tween_factory
9 pyramid.tweens.excview_tween_factory

In the above configuration, calls made during configuration to pyramid.config.Configurator.


add_tween() are ignored, and the user is telling the system to use the tween factories he has listed in the
pyramid.tweens configuration setting (each is a dotted Python name which points to a tween factory)
instead of any tween factories added via pyramid.config.Configurator.add_tween(). The

0.3. Narrative Documentation 659


The Pyramid Web Framework, Version 1.9.4

first tween factory in the pyramid.tweens list will be used as the producer of the effective Pyramid
request handling function; it will wrap the tween factory declared directly ”below” it, ad infinitum. The
”main” Pyramid request handler is implicit, and always ”at the bottom”.

Pyramid’s own exception view handling logic is implemented as a tween factory function:
pyramid.tweens.excview_tween_factory(). If Pyramid exception view handling is desired,
and tween factories are specified via the pyramid.tweens configuration setting, the pyramid.
tweens.excview_tween_factory() function must be added to the pyramid.tweens config-
uration setting list explicitly. If it is not present, Pyramid will not perform exception view handling.

Tween Conflicts and Ordering Cycles

Pyramid will prevent the same tween factory from being added to the tween chain more than once us-
ing configuration conflict detection. If you wish to add the same tween factory more than once in
a configuration, you should either: (a) use a tween factory that is a separate globally importable in-
stance object from the factory that it conflicts with; (b) use a function or class as a tween factory with
the same logic as the other tween factory it conflicts with, but with a different __name__ attribute;
or (c) call pyramid.config.Configurator.commit() between calls to pyramid.config.
Configurator.add_tween().
If a cycle is detected in implicit tween ordering when over and under are used in any call to
add_tween, an exception will be raised at startup time.

Displaying Tween Ordering

The ptweens command-line utility can be used to report the current implict and explicit tween chains
used by an application. See Displaying ”Tweens”.

Adding a Third Party View, Route, or Subscriber Predicate

New in version 1.4.

View and Route Predicates

View and route predicates used during configuration allow you to narrow the set of circumstances under
which a view or route will match. For example, the request_method view predicate can be used to
ensure a view callable is only invoked when the request’s method is POST:

660 Contents
The Pyramid Web Framework, Version 1.9.4

@view_config(request_method='POST')
def someview(request):
...

Likewise, a similar predicate can be used as a route predicate:

config.add_route('name', '/foo', request_method='POST')

Many other built-in predicates exists (request_param, and others). You can add third-
party predicates to the list of available predicates by using one of pyramid.config.
Configurator.add_view_predicate() or pyramid.config.Configurator.
add_route_predicate(). The former adds a view predicate, the latter a route predicate.

When using one of those APIs, you pass a name and a factory to add a predicate during Pyramid’s config-
uration stage. For example:

config.add_view_predicate('content_type', ContentTypePredicate)

The above example adds a new predicate named content_type to the list of available predicates for
views. This will allow the following view configuration statement to work:

1 @view_config(content_type='File')
2 def aview(request): ...

The first argument to pyramid.config.Configurator.add_view_predicate(), the name,


is a string representing the name that is expected to be passed to view_config (or its imperative analogue
add_view).

The second argument is a view or route predicate factory, or a dotted Python name which refers to a
view or route predicate factory. A view or route predicate factory is most often a class with a constructor
(__init__), a text method, a phash method, and a __call__ method. For example:

1 class ContentTypePredicate(object):
2 def __init__(self, val, config):
3 self.val = val
4

5 def text(self):
6 return 'content_type = %s' % (self.val,)
(continues on next page)

0.3. Narrative Documentation 661


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


7

8 phash = text
9

10 def __call__(self, context, request):


11 return request.content_type == self.val

The constructor of a predicate factory takes two arguments: val and config. The val argument will
be the argument passed to view_config (or add_view). In the example above, it will be the string
File. The second argument, config, will be the Configurator instance at the time of configuration.

The text method must return a string. It should be useful to describe the behavior of the predicate in
error messages.

The phash method must return a string or a sequence of strings. It’s most often the same as text, as long
as text uniquely describes the predicate’s name and the value passed to the constructor. If text is more
general, or doesn’t describe things that way, phash should return a string with the name and the value
serialized. The result of phash is not seen in output anywhere, it just informs the uniqueness constraints
for view configuration.

The __call__ method differs depending on whether the predicate is used as a view predicate or a route
predicate:

• When used as a route predicate, the __call__ signature is (info, request). The info
object is a dictionary containing two keys: match and route. info['match'] is the match-
dict containing the patterns matched in the route pattern. info['route'] is the pyramid.
interfaces.IRoute object for the current route.

• When used as a view predicate, the __call__ signature is (context, request). The
context is the result of traversal performed using either the route’s root factory or the app’s
default root factory.

In both cases the __call__ method is expected to return True or False.

It is possible to use the same predicate factory as both a view predicate and as a route predicate, but they’ll
need to handle the info or context argument specially (many predicates do not need this argument)
and you’ll need to call add_view_predicate and add_route_predicate separately with the
same factory.

662 Contents
The Pyramid Web Framework, Version 1.9.4

Subscriber Predicates

Subscriber predicates work almost exactly like view and route predicates. They narrow the set of circum-
stances in which a subscriber will be called. There are several minor differences between a subscriber
predicate and a view or route predicate:

• There are no default subscriber predicates. You must register one to use one.

• The __call__ method of a subscriber predicate accepts a single event object instead of a
context and a request.

• Not every subscriber predicate can be used with every event type. Some subscriber predicates will
assume a certain event type.

Here’s an example of a subscriber predicate that can be used in conjunction with a subscriber that subscribes
to the pyramid.events.NewRequest event type.

1 class RequestPathStartsWith(object):
2 def __init__(self, val, config):
3 self.val = val
4

5 def text(self):
6 return 'path_startswith = %s' % (self.val,)
7

8 phash = text
9

10 def __call__(self, event):


11 return event.request.path.startswith(self.val)

Once you’ve created a subscriber predicate, it may be registered via pyramid.config.


Configurator.add_subscriber_predicate(). For example:

config.add_subscriber_predicate(
'request_path_startswith', RequestPathStartsWith)

Once a subscriber predicate is registered, you can use it in a call to pyramid.config.


Configurator.add_subscriber() or to pyramid.events.subscriber. Here’s an ex-
ample of using the previously registered request_path_startswith predicate in a call to
add_subscriber():

0.3. Narrative Documentation 663


The Pyramid Web Framework, Version 1.9.4

1 # define a subscriber in your code


2

3 def yosubscriber(event):
4 event.request.yo = 'YO!'
5

6 # and at configuration time


7

8 config.add_subscriber(yosubscriber, NewRequest,
9 request_path_startswith='/add_yo')

Here’s the same subscriber/predicate/event-type combination used via subscriber.

1 from pyramid.events import subscriber


2

3 @subscriber(NewRequest, request_path_startswith='/add_yo')
4 def yosubscriber(event):
5 event.request.yo = 'YO!'

In either of the above configurations, the yosubscriber callable will only be called if the request path
starts with /add_yo. Otherwise the event subscriber will not be called.

Note that the request_path_startswith subscriber you defined can be used with events that have
a request attribute, but not ones that do not. So, for example, the predicate can be used with subscribers
registered for pyramid.events.NewRequest and pyramid.events.ContextFound events,
but it cannot be used with subscribers registered for pyramid.events.ApplicationCreated be-
cause the latter type of event has no request attribute. The point being, unlike route and view predicates,
not every type of subscriber predicate will necessarily be applicable for use in every subscriber registra-
tion. It is not the responsibility of the predicate author to make every predicate make sense for every event
type; it is the responsibility of the predicate consumer to use predicates that make sense for a particular
event type registration.

View Derivers

New in version 1.7.

Every URL processed by Pyramid is matched against a custom view pipeline. See Request Processing
for how this works. The view pipeline itself is built from the user-supplied view callable, which is then
composed with view derivers. A view deriver is a composable element of the view pipeline which is used
to wrap a view with added functionality. View derivers are very similar to the decorator argument to

664 Contents
The Pyramid Web Framework, Version 1.9.4

pyramid.config.Configurator.add_view(), except that they have the option to execute for


every view in the application.

It is helpful to think of a view deriver as middleware for views. Unlike tweens or WSGI middleware which
are scoped to the application itself, a view deriver is invoked once per view in the application, and can use
configuration options from the view to customize its behavior.

Built-in View Derivers

There are several built-in view derivers that Pyramid will automatically apply to any view. Below they are
defined in order from furthest to closest to the user-defined view callable:

secured_view

Enforce the permission defined on the view. This element is a no-op if no permission is
defined. Note there will always be a permission defined if a default permission was assigned
via pyramid.config.Configurator.set_default_permission() unless the
view is an exception view.

This element will also output useful debugging information when pyramid.
debug_authorization is enabled.

csrf_view

Used to check the CSRF token provided in the request. This element is a no-op if
require_csrf view option is not True. Note there will always be a require_csrf
option if a default value was assigned via pyramid.config.Configurator.
set_default_csrf_options() unless the view is an exception view.

owrapped_view

Invokes the wrapped view defined by the wrapper option.

http_cached_view

Applies cache control headers to the response defined by the http_cache option. This
element is a no-op if the pyramid.prevent_http_cache setting is enabled or the
http_cache option is None.

decorated_view

0.3. Narrative Documentation 665


The Pyramid Web Framework, Version 1.9.4

Wraps the view with the decorators from the decorator option.

rendered_view

Adapts the result of the view callable into a response object. Below this point the result may
be any Python object.

mapped_view

Applies the view mapper defined by the mapper option or the application’s default view
mapper to the view callable. This is always the closest deriver to the user-defined view and
standardizes the view pipeline interface to accept (context, request) from all previous
view derivers.

Any view derivers defined under the rendered_view are not guaranteed to receive a valid
response object. Rather they will receive the result from the view mapper which is likely the original
response returned from the view. This is possibly a dictionary for a renderer but it may be any Python
object that may be adapted into a response.

Custom View Derivers

It is possible to define custom view derivers which will affect all views in an application. There are
many uses for this, but most will likely be centered around monitoring and security. In order to regis-
ter a custom view deriver, you should create a callable that conforms to the pyramid.interfaces.
IViewDeriver interface, and then register it with your application using pyramid.config.
Configurator.add_view_deriver(). The callable should accept the view to be wrapped and
the info object which is an instance of pyramid.interfaces.IViewDeriverInfo. For exam-
ple, below is a callable that can provide timing information for the view pipeline:

1 import time
2

3 def timing_view(view, info):


4 if info.options.get('timed'):
5 def wrapper_view(context, request):
6 start = time.time()
7 response = view(context, request)
8 end = time.time()
9 response.headers['X-View-Performance'] = '%.3f' % (end -
,→ start,)

(continues on next page)

666 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


10 return response
11 return wrapper_view
12 return view
13

14 timing_view.options = ('timed',)
15

16 config.add_view_deriver(timing_view)

The setting of timed on the timing_view signifies to Pyramid that timed is a valid view_config
keyword argument now. The timing_view custom view deriver as registered above will only be active
for any view defined with a timed=True value passed as one of its view_config keywords.

For example, this view configuration will not be a timed view:

1 @view_config(route_name='home')
2 def home(request):
3 return Response('Home')

But this view will have timing information added to the response headers:

1 @view_config(route_name='home', timed=True)
2 def home(request):
3 return Response('Home')

View derivers are unique in that they have access to most of the options passed to pyramid.config.
Configurator.add_view() in order to decide what to do, and they have a chance to affect every
view in the application.

Exception Views and View Derivers

A view deriver has the opportunity to wrap any view, including an exception view. In general this is fine, but
certain view derivers may wish to avoid doing certain things when handling exceptions. For example, the
csrf_view and secured_view built-in view derivers will not perform security checks on exception
views unless explicitly told to do so.

You can check for info.exception_only on the pyramid.interfaces.


IViewDeriverInfo object when wrapping the view to determine whether you are wrapping an
exception view or a normal view.

0.3. Narrative Documentation 667


The Pyramid Web Framework, Version 1.9.4

Ordering View Derivers

By default, every new view deriver is added between the decorated_view and rendered_view
built-in derivers. It is possible to customize this ordering using the over and under options. Each
option can use the names of other view derivers in order to specify an ordering. There should rarely be a
reason to worry about the ordering of the derivers except when the deriver depends on other operations in
the view pipeline.

Both over and under may also be iterables of constraints. For either option, if one or more constraints
was defined, at least one must be satisfied, else a pyramid.exceptions.ConfigurationError
will be raised. This may be used to define fallback constraints if another deriver is missing.

Two sentinel values exist, pyramid.viewderivers.INGRESS and pyramid.viewderivers.


VIEW , which may be used when specifying constraints at the edges of the view pipeline. For example, to
add a deriver at the start of the pipeline you may use under=INGRESS.

It is not possible to add a view deriver under the mapped_view as the view mapper is intimately tied
to the signature of the user-defined view callable. If you simply need to know what the original view
callable was, it can be found as info.original_view on the provided pyramid.interfaces.
IViewDeriverInfo object passed to every view deriver.

The default constraints for any view deriver are over='rendered_view' and
under='decorated_view'. When escaping these constraints you must take care to avoid
cyclic dependencies between derivers. For example, if you want to add a new view deriver before
secured_view then simply specifying over='secured_view' is not enough, because the de-
fault is also under decorated view there will be an unsatisfiable cycle. You must specify a valid
under constraint as well, such as under=INGRESS to fall between INGRESS and secured_view
at the beginning of the view pipeline.

0.3.32 Pyramid Configuration Introspection

New in version 1.3.

When Pyramid starts up, each call to a configuration directive causes one or more introspectable objects
to be registered with an introspector. The introspector can be queried by application code to obtain in-
formation about the configuration of the running application. This feature is useful for debug toolbars,
command-line scripts which show some aspect of configuration, and for runtime reporting of startup-time
configuration settings.

668 Contents
The Pyramid Web Framework, Version 1.9.4

Using the Introspector

Here’s an example of using Pyramid’s introspector from within a view callable:

1 from pyramid.view import view_config


2 from pyramid.response import Response
3

4 @view_config(route_name='bar')
5 def show_current_route_pattern(request):
6 introspector = request.registry.introspector
7 route_name = request.matched_route.name
8 route_intr = introspector.get('routes', route_name)
9 return Response(str(route_intr['pattern']))

This view will return a response that contains the ”pattern” argument provided to the add_route
method of the route which matched when the view was called. It uses the pyramid.interfaces.
IIntrospector.get() method to return an introspectable in the category routes with a discrim-
inator equal to the matched route name. It then uses the returned introspectable to obtain a ”pattern”
value.

The introspectable returned by the query methods of the introspector has methods and attributes described
by pyramid.interfaces.IIntrospectable. In particular, the get(), get_category(),
categories(), categorized(), and related() methods of an introspector can be used to query
for introspectables.

Introspectable Objects

Introspectable objects are returned from query methods of an introspector. Each introspectable object
implements the attributes and methods documented at pyramid.interfaces.IIntrospectable.

The important attributes shared by all introspectables are the following:

title

A human-readable text title describing the introspectable

category_name

A text category name describing the introspection category to which this introspectable be-
longs. It is often a plural if there are expected to be more than one introspectable registered
within the category.

0.3. Narrative Documentation 669


The Pyramid Web Framework, Version 1.9.4

discriminator

A hashable object representing the unique value of this introspectable within its category.

discriminator_hash

The integer hash of the discriminator (useful in HTML links).

type_name

The text name of a subtype within this introspectable’s category. If there is only one type name
in this introspectable’s category, this value will often be a singular version of the category name
but it can be an arbitrary value.

action_info

An object describing the directive call site which caused this introspectable to be registered.
It contains attributes described in pyramid.interfaces.IActionInfo.

Besides having the attributes described above, an introspectable is a dictionary-like object. An intro-
spectable can be queried for data values via its __getitem__, get, keys, values, or items meth-
ods. For example:

1 route_intr = introspector.get('routes', 'edit_user')


2 pattern = route_intr['pattern']

Pyramid Introspection Categories

The list of concrete introspection categories provided by built-in Pyramid configuration directives follows.
Add-on packages may supply other introspectables in categories not described here.

subscribers

Each introspectable in the subscribers category represents a call to pyramid.


config.Configurator.add_subscriber() (or the decorator equivalent). Each
will have the following data.

subscriber

The subscriber callable object (the resolution of the subscriber argument


passed to add_subscriber).

670 Contents
The Pyramid Web Framework, Version 1.9.4

interfaces

A sequence of interfaces (or classes) that are subscribed to (the resolution of the
ifaces argument passed to add_subscriber).

derived_subscriber

A wrapper around the subscriber used internally by the system so it can call it with
more than one argument if your original subscriber accepts only one.

predicates

The predicate objects created as the result of passing predicate arguments to


add_subscriber.

derived_predicates

Wrappers around the predicate objects created as the result of passing predicate
arguments to add_subscriber (to be used when predicates take only one value
but must be passed more than one).

response adapters

Each introspectable in the response adapters category represents a call to pyramid.


config.Configurator.add_response_adapter() (or a decorator equivalent).
Each will have the following data.

adapter

The adapter object (the resolved adapter argument to


add_response_adapter).

type

The resolved type_or_iface argument passed to


add_response_adapter.

root factories

Each introspectable in the root factories category represents a call to pyramid.


config.Configurator.set_root_factory() (or the Configurator constructor
equivalent) or a factory argument passed to pyramid.config.Configurator.
add_route(). Each will have the following data.

factory

0.3. Narrative Documentation 671


The Pyramid Web Framework, Version 1.9.4

The factory object (the resolved factory argument to set_root_factory).

route_name

The name of the route which will use this factory. If this is the default root factory
(if it’s registered during a call to set_root_factory), this value will be None.

session factory

Only one introspectable will exist in the session factory category. It represents a call
to pyramid.config.Configurator.set_session_factory() (or the Config-
urator constructor equivalent). It will have the following data.

factory

The factory object (the resolved factory argument to


set_session_factory).

request factory

Only one introspectable will exist in the request factory category. It represents a call
to pyramid.config.Configurator.set_request_factory() (or the Config-
urator constructor equivalent). It will have the following data.

factory

The factory object (the resolved factory argument to


set_request_factory).

locale negotiator

Only one introspectable will exist in the locale negotiator category. It represents
a call to pyramid.config.Configurator.set_locale_negotiator() (or the
Configurator constructor equivalent). It will have the following data.

negotiator

The factory object (the resolved negotiator argument to


set_locale_negotiator).

renderer factories

672 Contents
The Pyramid Web Framework, Version 1.9.4

Each introspectable in the renderer factories category represents a call to


pyramid.config.Configurator.add_renderer() (or the Configurator con-
structor equivalent). Each will have the following data.

name

The name of the renderer (the value of the name argument to add_renderer).

factory

The factory object (the resolved factory argument to add_renderer).

routes

Each introspectable in the routes category represents a call to pyramid.config.


Configurator.add_route(). Each will have the following data.

name

The name argument passed to add_route.

pattern

The pattern argument passed to add_route.

factory

The (resolved) factory argument passed to add_route.

xhr

The xhr argument passed to add_route.

request_method

The request_method argument passed to add_route.

request_methods

A sequence of request method names implied by the request_method argu-


ment passed to add_route or the value None if a request_method argu-
ment was not supplied.

0.3. Narrative Documentation 673


The Pyramid Web Framework, Version 1.9.4

path_info

The path_info argument passed to add_route.

request_param

The request_param argument passed to add_route.

header

The header argument passed to add_route.

accept

The accept argument passed to add_route.

traverse

The traverse argument passed to add_route.

custom_predicates

The custom_predicates argument passed to add_route.

pregenerator

The pregenerator argument passed to add_route.

static

The static argument passed to add_route.

use_global_views

The use_global_views argument passed to add_route.

object

The pyramid.interfaces.IRoute object that is used to perform matching


and generation for this route.

authentication policy

674 Contents
The Pyramid Web Framework, Version 1.9.4

There will be one and only one introspectable in the authentication policy
category. It represents a call to the pyramid.config.Configurator.
set_authentication_policy() method (or its Configurator constructor equivalent).
It will have the following data.

policy

The policy object (the resolved policy argument to


set_authentication_policy).

authorization policy

There will be one and only one introspectable in the authorization policy
category. It represents a call to the pyramid.config.Configurator.
set_authorization_policy() method (or its Configurator constructor equivalent).
It will have the following data.

policy

The policy object (the resolved policy argument to


set_authorization_policy).

default permission

There will be one and only one introspectable in the default permission
category. It represents a call to the pyramid.config.Configurator.
set_default_permission() method (or its Configurator constructor equivalent). It
will have the following data.

value

The permission name passed to set_default_permission.

default csrf options

There will be one and only one introspectable in the default csrf options
category. It represents a call to the pyramid.config.Configurator.
set_default_csrf_options() method. It will have the following data.

require_csrf

The default value for require_csrf if left unspecified on calls to pyramid.


config.Configurator.add_view().

0.3. Narrative Documentation 675


The Pyramid Web Framework, Version 1.9.4

token

The name of the token searched in request.POST to find a valid CSRF token.

header

The name of the request header searched to find a valid CSRF token.

safe_methods

The list of HTTP methods considered safe and exempt from CSRF checks.

views

Each introspectable in the views category represents a call to pyramid.config.


Configurator.add_view(). Each will have the following data.

name

The name argument passed to add_view.

context

The (resolved) context argument passed to add_view.

containment

The (resolved) containment argument passed to add_view.

request_param

The request_param argument passed to add_view.

request_methods

A sequence of request method names implied by the request_method argu-


ment passed to add_view or the value None if a request_method argument
was not supplied.

route_name

The route_name argument passed to add_view.

676 Contents
The Pyramid Web Framework, Version 1.9.4

attr

The attr argument passed to add_view.

xhr

The xhr argument passed to add_view.

accept

The accept argument passed to add_view.

header

The header argument passed to add_view.

path_info

The path_info argument passed to add_view.

match_param

The match_param argument passed to add_view.

csrf_token

The csrf_token argument passed to add_view.

callable

The (resolved) view argument passed to add_view. Represents the ”raw” view
callable.

derived_callable

The view callable derived from the view argument passed to add_view. Rep-
resents the view callable which Pyramid itself calls (wrapped in security and other
wrappers).

mapper

The (resolved) mapper argument passed to add_view.

0.3. Narrative Documentation 677


The Pyramid Web Framework, Version 1.9.4

decorator

The (resolved) decorator argument passed to add_view.

permissions

Each introspectable in the permissions category represents a call to pyramid.


config.Configurator.add_view() that has an explicit permission argument or
a call to pyramid.config.Configurator.set_default_permission(). Each
will have the following data.

value

The permission name passed to add_view or set_default_permission.

templates

Each introspectable in the templates category represents a call to pyramid.config.


Configurator.add_view() that has a renderer argument which points to a tem-
plate. Each will have the following data.

name

The renderer’s name (a string).

type

The renderer’s type (a string).

renderer

The pyramid.interfaces.IRendererInfo object which represents this


template’s renderer.

view mappers

Each introspectable in the view mappers category represents a call to pyramid.


config.Configurator.add_view() that has an explicit mapper argument or a call
to pyramid.config.Configurator.set_view_mapper(). Each will have the
following data.

mapper

678 Contents
The Pyramid Web Framework, Version 1.9.4

The (resolved) mapper argument passed to add_view or


set_view_mapper.

asset overrides

Each introspectable in the asset overrides category represents a call to pyramid.


config.Configurator.override_asset(). Each will have the following data.

to_override

The to_override argument (an asset spec) passed to override_asset.

override_with

The override_with argument (an asset spec) passed to override_asset.

translation directories

Each introspectable in the translation directories category represents an indi-


vidual element in a specs argument passed to pyramid.config.Configurator.
add_translation_dirs(). Each will have the following data.

directory

The absolute path of the translation directory.

spec

The asset specification passed to add_translation_dirs.

tweens

Each introspectable in the tweens category represents a call to pyramid.config.


Configurator.add_tween(). Each will have the following data.

name

The dotted name to the tween factory as a string (passed as the tween_factory
argument to add_tween).

factory

The (resolved) tween factory object.

0.3. Narrative Documentation 679


The Pyramid Web Framework, Version 1.9.4

type
implicit or explicit as a string.
under
The under argument passed to add_tween (a string).
over
The over argument passed to add_tween (a string).
static views
Each introspectable in the static views category represents a call to pyramid.
config.Configurator.add_static_view(). Each will have the following data.
name
The name argument provided to add_static_view.
spec
A normalized version of the spec argument provided to add_static_view.
traversers
Each introspectable in the traversers category represents a call to pyramid.config.
Configurator.add_traverser(). Each will have the following data.
iface
The (resolved) interface or class object that represents the return value of a root
factory for which this traverser will be used.
adapter
The (resolved) traverser class.
resource url adapters
Each introspectable in the resource url adapters category represents a call to
pyramid.config.Configurator.add_resource_url_adapter(). Each will
have the following data.
adapter
The (resolved) resource URL adapter class.
resource_iface
The (resolved) interface or class object that represents the resource interface for
which this URL adapter is registered.
request_iface
The (resolved) interface or class object that represents the request interface for
which this URL adapter is registered.

680 Contents
The Pyramid Web Framework, Version 1.9.4

Introspection in the Toolbar

The Pyramid debug toolbar (part of the pyramid_debugtoolbar package) provides a canned view
of all registered introspectables and their relationships. It is currently under the ”Global” tab in the main
navigation, and it looks something like this:

Disabling Introspection

You can disable Pyramid introspection by passing the flag introspection=False to the Configurator
constructor in your application setup:

0.3. Narrative Documentation 681


The Pyramid Web Framework, Version 1.9.4

from pyramid.config import Configurator


config = Configurator(..., introspection=False)

When introspection is False, all introspectables generated by configuration directives are thrown
away.

0.3.33 Extending an Existing Pyramid Application

If a Pyramid developer has obeyed certain constraints while building an application, a third party should
be able to change the application’s behavior without needing to modify its source code. The behavior of a
Pyramid application that obeys certain constraints can be overridden or extended without modification.

We’ll define some jargon here for the benefit of identifying the parties involved in such an effort.

Developer The original application developer.

Integrator Another developer who wishes to reuse the application written by the original application
developer in an unanticipated context. They may also wish to modify the original application without
changing the original application’s source code.

The Difference Between ”Extensible” and ”Pluggable” Applications

Other web frameworks, such as Django, advertise that they allow developers to create ”pluggable applica-
tions”. They claim that if you create an application in a certain way, it will be integratable in a sensible,
structured way into another arbitrarily-written application or project created by a third-party developer.

Pyramid, as a platform, does not claim to provide such a feature. The platform provides no guarantee that
you can create an application and package it up such that an arbitrary integrator can use it as a subcomponent
in a larger Pyramid application or project. Pyramid does not mandate the constraints necessary for such a
pattern to work satisfactorily. Because Pyramid is not very ”opinionated”, developers are able to use wildly
different patterns and technologies to build an application. A given Pyramid application may happen to be
reusable by a particular third party integrator because the integrator and the original developer may share
similar base technology choices (such as the use of a particular relational database or ORM). But the same
application may not be reusable by a different developer, because they have made different technology
choices which are incompatible with the original developer’s.

As a result, the concept of a ”pluggable application” is left to layers built above Pyramid, such as a ”CMS”
layer or ”application server” layer. Such layers are apt to provide the necessary ”opinions” (such as man-
dating a storage layer, a templating system, and a structured, well-documented pattern of registering that

682 Contents
The Pyramid Web Framework, Version 1.9.4

certain URLs map to certain bits of code) which makes the concept of a ”pluggable application” possible.
”Pluggable applications”, thus, should not plug into Pyramid itself but should instead plug into a system
written atop Pyramid.

Although it does not provide for ”pluggable applications”, Pyramid does provide a rich set of mechanisms
which allows for the extension of a single existing application. Such features can be used by frameworks
built using Pyramid as a base. All Pyramid applications may not be pluggable, but all Pyramid applications
are extensible.

Rules for Building an Extensible Application

There is only one rule you need to obey if you want to build a maximally extensible Pyramid application:
as a developer, you should factor any overridable imperative configuration you’ve created into functions
which can be used via pyramid.config.Configurator.include(), rather than inlined as calls
to methods of a Configurator within the main function in your application’s __init__.py. For exam-
ple, rather than:

1 from pyramid.config import Configurator


2

3 if __name__ == '__main__':
4 config = Configurator()
5 config.add_view('myapp.views.view1', name='view1')
6 config.add_view('myapp.views.view2', name='view2')

You should move the calls to add_view outside of the (non-reusable) if __name__ ==
'__main__' block, and into a reusable function:

1 from pyramid.config import Configurator


2

3 if __name__ == '__main__':
4 config = Configurator()
5 config.include(add_views)
6

7 def add_views(config):
8 config.add_view('myapp.views.view1', name='view1')
9 config.add_view('myapp.views.view2', name='view2')

Doing this allows an integrator to maximally reuse the configuration statements that relate to your appli-
cation by allowing them to selectively include or exclude the configuration functions you’ve created from
an ”override package”.

0.3. Narrative Documentation 683


The Pyramid Web Framework, Version 1.9.4

Alternatively you can use ZCML for the purpose of making configuration extensible and overridable.
ZCML declarations that belong to an application can be overridden and extended by integrators as nec-
essary in a similar fashion. If you use only ZCML to configure your application, it will automatically be
maximally extensible without any manual effort. See pyramid_zcml for information about using ZCML.

Fundamental Plugpoints

The fundamental ”plug points” of an application developed using Pyramid are routes, views, and as-
sets. Routes are declarations made using the pyramid.config.Configurator.add_route()
method. Views are declarations made using the pyramid.config.Configurator.add_view()
method. Assets are files that are accessed by Pyramid using the pkg_resources API such as static files and
templates via a asset specification. Other directives and configurator methods also deal in routes, views,
and assets. For example, the add_handler directive of the pyramid_handlers package adds a
single route and some number of views.

Extending an Existing Application

The steps for extending an existing application depend largely on whether the application does or does not
use configuration decorators or imperative code.

If the Application Has Configuration Decorations

You’ve inherited a Pyramid application which you’d like to extend or override that uses pyramid.view.
view_config decorators or other configuration decoration decorators.

If you just want to extend the application, you can run a scan against the application’s package, then add
additional configuration that registers more views or routes.

1 if __name__ == '__main__':
2 config.scan('someotherpackage')
3 config.add_view('mypackage.views.myview', name='myview')

If you want to override configuration in the application, you may need to run pyramid.config.
Configurator.commit() after performing the scan of the original package, then add additional
configuration that registers more views or routes which perform overrides.

684 Contents
The Pyramid Web Framework, Version 1.9.4

1 if __name__ == '__main__':
2 config.scan('someotherpackage')
3 config.commit()
4 config.add_view('mypackage.views.myview', name='myview')

Once this is done, you should be able to extend or override the application like any other (see Extending
the Application).

You can alternatively just prevent a scan from happening by omitting any call to the pyramid.config.
Configurator.scan() method. This will cause the decorators attached to objects in the target ap-
plication to do nothing. At this point, you will need to convert all the configuration done in decorators into
equivalent imperative configuration or ZCML, and add that configuration or ZCML to a separate Python
package as described in Extending the Application.

Extending the Application

To extend or override the behavior of an existing application, you will need to create a new package which
includes the configuration of the old package, and you’ll perhaps need to create implementations of the
types of things you’d like to override (such as views), to which they are referred within the original package.

The general pattern for extending an existing application looks something like this:

• Create a new Python package. The easiest way to do this is to create a new Pyramid application
using a cookiecutter. See Creating the Project for more information.

• In the new package, create Python files containing views and other overridden elements, such as
templates and static assets as necessary.

• Install the new package into the same Python environment as the original application (e.g., $VENV/
bin/pip install -e . or $VENV/bin/pip install .).

• Change the main function in the new package’s __init__.py to include the original Pyramid
application’s configuration functions via pyramid.config.Configurator.include()
statements or a scan.

• Wire the new views and assets created in the new package up using imperative registrations within
the main function of the __init__.py file of the new application. This wiring should happen
after including the configuration functions of the old application. These registrations will extend or
override any registrations performed by the original application. See Overriding Views, Overriding
Routes, and Overriding Assets.

0.3. Narrative Documentation 685


The Pyramid Web Framework, Version 1.9.4

Overriding Views

The view configuration declarations that you make which override application behavior will usually have
the same view predicate attributes as the original that you wish to override. These <view> declarations
will point at ”new” view code in the override package that you’ve created. The new view code itself will
usually be copy-and-paste copies of view callables from the original application with slight tweaks.

For example, if the original application has the following configure_views configuration method:

1 def configure_views(config):
2 config.add_view('theoriginalapp.views.theview', name='theview')

You can override the first view configuration statement made by configure_views within the override
package, after loading the original configuration function:

1 from pyramid.config import Configurator


2 from originalapp import configure_views
3

4 if __name == '__main__':
5 config = Configurator()
6 config.include(configure_views)
7 config.add_view('theoverrideapp.views.theview', name='theview')

In this case, the theoriginalapp.views.theview view will never be executed. Instead, a new
view, theoverrideapp.views.theview will be executed when request circumstances dictate.

A similar pattern can be used to extend the application with add_view declarations. Just register a new
view against some other set of predicates to make sure the URLs it implies are available on some other
page rendering.

Overriding Routes

Route setup is currently typically performed in a sequence of ordered calls to add_route(). Because
these calls are ordered relative to each other, and because this ordering is typically important, you should re-
tain their relative ordering when performing an override. Typically this means copying all the add_route
statements into the override package’s file and changing them as necessary. Then exclude any add_route
statements from the original application.

686 Contents
The Pyramid Web Framework, Version 1.9.4

Overriding Assets

Assets are files on the filesystem that are accessible within a Python package. An entire chapter is devoted to
assets: Static Assets. Within this chapter is a section named Overriding Assets. This section of that chapter
describes in detail how to override package assets with other assets by using the pyramid.config.
Configurator.override_asset() method. Add such override_asset calls to your override
package’s __init__.py to perform overrides.

0.3.34 Advanced Configuration

To support application extensibility, the Pyramid Configurator by default detects configuration conflicts
and allows you to include configuration imperatively from other packages or modules. It also by default
performs configuration in two separate phases. This allows you to ignore relative configuration statement
ordering in some circumstances.

Conflict Detection

Here’s a familiar example of one of the simplest Pyramid applications, configured imperatively:

1 from wsgiref.simple_server import make_server


2 from pyramid.config import Configurator
3 from pyramid.response import Response
4

5 def hello_world(request):
6 return Response('Hello world!')
7

8 if __name__ == '__main__':
9 config = Configurator()
10 config.add_view(hello_world)
11 app = config.make_wsgi_app()
12 server = make_server('0.0.0.0', 8080, app)
13 server.serve_forever()

When you start this application, all will be OK. However, what happens if we try to add another view to
the configuration with the same set of predicate arguments as one we’ve already added?

0.3. Narrative Documentation 687


The Pyramid Web Framework, Version 1.9.4

1 from wsgiref.simple_server import make_server


2 from pyramid.config import Configurator
3 from pyramid.response import Response
4

5 def hello_world(request):
6 return Response('Hello world!')
7

8 def goodbye_world(request):
9 return Response('Goodbye world!')
10

11 if __name__ == '__main__':
12 config = Configurator()
13

14 config.add_view(hello_world, name='hello')
15

16 # conflicting view configuration


17 config.add_view(goodbye_world, name='hello')
18

19 app = config.make_wsgi_app()
20 server = make_server('0.0.0.0', 8080, app)
21 server.serve_forever()

The application now has two conflicting view configuration statements. When we try to start it again, it
won’t start. Instead we’ll receive a traceback that ends something like this:

1 Traceback (most recent call last):


2 File "app.py", line 12, in <module>
3 app = config.make_wsgi_app()
4 File "pyramid/config.py", line 839, in make_wsgi_app
5 self.commit()
6 File "pyramid/pyramid/config.py", line 473, in commit
7 self._ctx.execute_actions()
8 ... more code ...
9 pyramid.exceptions.ConfigurationConflictError:
10 Conflicting configuration actions
11 For: ('view', None, '', None, <InterfaceClass pyramid.interfaces.
,→IView>,

12 None, None, None, None, None, False, None, None, None)


13 Line 14 of file app.py in <module>: 'config.add_view(hello_world)'
14 Line 17 of file app.py in <module>: 'config.add_view(goodbye_
,→world)'

688 Contents
The Pyramid Web Framework, Version 1.9.4

This traceback is trying to tell us:

• We’ve got conflicting information for a set of view configuration statements (The For: line).

• There are two statements which conflict, shown beneath the For: line: config.
add_view(hello_world. 'hello') on line 14 of app.py, and config.
add_view(goodbye_world, 'hello') on line 17 of app.py.

These two configuration statements are in conflict because we’ve tried to tell the system that the set
of predicate values for both view configurations are exactly the same. Both the hello_world and
goodbye_world views are configured to respond under the same set of circumstances. This circum-
stance, the view name represented by the name= predicate, is hello.

This presents an ambiguity that Pyramid cannot resolve. Rather than allowing the circumstance to go
unreported, by default Pyramid raises a ConfigurationConflictError error and prevents the ap-
plication from running.

Conflict detection happens for any kind of configuration: imperative configuration or configuration that
results from the execution of a scan.

Manually Resolving Conflicts

There are a number of ways to manually resolve conflicts: by changing registrations to not conflict, by
strategically using pyramid.config.Configurator.commit(), or by using an ”autocommit-
ting” configurator.

The Right Thing

The most correct way to resolve conflicts is to ”do the needful”: change your configuration code
to not have conflicting configuration statements. The details of how this is done depends en-
tirely on the configuration statements made by your application. Use the detail provided in the
ConfigurationConflictError to track down the offending conflicts and modify your configu-
ration code accordingly.

If you’re getting a conflict while trying to extend an existing application, and that application has a function
which performs configuration like this one:

0.3. Narrative Documentation 689


The Pyramid Web Framework, Version 1.9.4

1 def add_routes(config):
2 config.add_route(...)

Don’t call this function directly with config as an argument. Instead, use pyramid.config.
Configurator.include():

1 config.include(add_routes)

Using include() instead of calling the function directly provides a modicum of automated conflict
resolution, with the configuration statements you define in the calling code overriding those of the included
function.

See also:

See also Automatic Conflict Resolution and Including Configuration from External Sources.

Using config.commit()

You can manually commit a configuration by using the commit() method between configuration calls.
For example, we prevent conflicts from occurring in the application we examined previously as the result
of adding a commit. Here’s the application that generates conflicts:

1 from wsgiref.simple_server import make_server


2 from pyramid.config import Configurator
3 from pyramid.response import Response
4

5 def hello_world(request):
6 return Response('Hello world!')
7

8 def goodbye_world(request):
9 return Response('Goodbye world!')
10

11 if __name__ == '__main__':
12 config = Configurator()
13

14 config.add_view(hello_world, name='hello')
15

16 # conflicting view configuration


(continues on next page)

690 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


17 config.add_view(goodbye_world, name='hello')
18

19 app = config.make_wsgi_app()
20 server = make_server('0.0.0.0', 8080, app)
21 server.serve_forever()

We can prevent the two add_view calls from conflicting by issuing a call to commit() between them:

1 from wsgiref.simple_server import make_server


2 from pyramid.config import Configurator
3 from pyramid.response import Response
4

5 def hello_world(request):
6 return Response('Hello world!')
7

8 def goodbye_world(request):
9 return Response('Goodbye world!')
10

11 if __name__ == '__main__':
12 config = Configurator()
13

14 config.add_view(hello_world, name='hello')
15

16 config.commit() # commit any pending configuration actions


17

18 # no-longer-conflicting view configuration


19 config.add_view(goodbye_world, name='hello')
20

21 app = config.make_wsgi_app()
22 server = make_server('0.0.0.0', 8080, app)
23 server.serve_forever()

In the above example we’ve issued a call to commit() between the two add_view calls. commit()
will execute any pending configuration statements.

Calling commit() is safe at any time. It executes all pending configuration actions and leaves the con-
figuration action list ”clean”.

Note that commit() has no effect when you’re using an autocommitting configurator (see Using an Au-
tocommitting Configurator).

0.3. Narrative Documentation 691


The Pyramid Web Framework, Version 1.9.4

Using an Autocommitting Configurator

You can also use a heavy hammer to circumvent conflict detection by using a configurator constructor
parameter: autocommit=True. For example:

1 from pyramid.config import Configurator


2

3 if __name__ == '__main__':
4 config = Configurator(autocommit=True)

When the autocommit parameter passed to the Configurator is True, conflict detection (and Two-
Phase Configuration) is disabled. Configuration statements will be executed immediately, and succeeding
statements will override preceding ones.

commit() has no effect when autocommit is True.

If you use a Configurator in code that performs unit testing, it’s usually a good idea to use an autocommitting
Configurator, because you are usually unconcerned about conflict detection or two-phase configuration in
test code.

Automatic Conflict Resolution

If your code uses the include() method to include external configuration, some conflicts are automat-
ically resolved. Configuration statements that are made as the result of an ”include” will be overridden by
configuration statements that happen within the caller of the ”include” method.

Automatic conflict resolution supports this goal. If a user wants to reuse a Pyramid application, and they
want to customize the configuration of this application without hacking its code ”from outside”, they can
”include” a configuration function from the package and override only some of its configuration statements
within the code that does the include. No conflicts will be generated by configuration statements within
the code that does the including, even if configuration statements in the included code would conflict if it
was moved ”up” to the calling code.

692 Contents
The Pyramid Web Framework, Version 1.9.4

Methods Which Provide Conflict Detection

These are the methods of the configurator which provide conflict detection:
add_view(), add_route(), add_renderer(), add_request_method(),
set_request_factory(), set_session_factory(), set_request_property(),
set_root_factory(), set_view_mapper(), set_authentication_policy(),
set_authorization_policy(), set_locale_negotiator(),
set_default_permission(), add_traverser(), add_resource_url_adapter(),
and add_response_adapter().
add_static_view() also indirectly provides conflict detection, because it’s implemented in terms of
the conflict-aware add_route and add_view methods.

Including Configuration from External Sources

Some application programmers will factor their configuration code in such a way that it is easy to reuse
and override configuration statements. For example, such a developer might factor out a function used to
add routes to their application:

1 def add_routes(config):
2 config.add_route(...)

Rather than calling this function directly with config as an argument, instead use pyramid.config.
Configurator.include():

1 config.include(add_routes)

Using include rather than calling the function directly will allow Automatic Conflict Resolution to work.
include() can also accept a module as an argument:

1 import myapp
2

3 config.include(myapp)

For this to work properly, the myapp module must contain a callable with the special name includeme,
which should perform configuration (like the add_routes callable we showed above as an example).
include() can also accept a dotted Python name to a function or a module.

See The <include> Tag for a declarative alternative to the include() method.

0.3. Narrative Documentation 693


The Pyramid Web Framework, Version 1.9.4

Two-Phase Configuration

When a non-autocommitting Configurator is used to do configuration (the default), configuration execution


happens in two phases. In the first phase, ”eager” configuration actions (actions that must happen before
all others, such as registering a renderer) are executed, and discriminators are computed for each of the
actions that depend on the result of the eager actions. In the second phase, the discriminators of all actions
are compared to do conflict detection.

Due to this, for configuration methods that have no internal ordering constraints, execution order of
configuration method calls is not important. For example, the relative ordering of add_view() and
add_renderer() is unimportant when a non-autocommitting configurator is used. This code snippet:

1 config.add_view('some.view', renderer='path_to_custom/renderer.rn')
2 config.add_renderer('.rn', SomeCustomRendererFactory)

Has the same result as:

1 config.add_renderer('.rn', SomeCustomRendererFactory)
2 config.add_view('some.view', renderer='path_to_custom/renderer.rn')

Even though the view statement depends on the registration of a custom renderer, due to two-phase con-
figuration, the order in which the configuration statements are issued is not important. add_view will
be able to find the .rn renderer even if add_renderer is called after add_view.

The same is untrue when you use an autocommitting configurator (see Using an Autocommitting Config-
urator). When an autocommitting configurator is used, two-phase configuration is disabled, and configu-
ration statements must be ordered in dependency order.

Some configuration methods, such as add_route() have internal ordering constraints: the routes they
imply require relative ordering. Such ordering constraints are not absolved by two-phase configuration.
Routes are still added in configuration execution order.

More Information

For more information, see the article A Whirlwind Tour of Advanced Configuration Tactics in the Pyramid
Community Cookbook.

694 Contents
The Pyramid Web Framework, Version 1.9.4

0.3.35 Extending Pyramid Configuration

Pyramid allows you to extend its Configurator with custom directives. Custom directives can use other
directives, they can add a custom action, they can participate in conflict resolution, and they can provide
some number of introspectable objects.

Adding Methods to the Configurator via add_directive

Framework extension writers can add arbitrary methods to a Configurator by using the
pyramid.config.Configurator.add_directive() method of the configurator. Using
add_directive() makes it possible to extend a Pyramid configurator in arbitrary ways, and allows it
to perform application-specific tasks more succinctly.

The add_directive() method accepts two positional arguments: a method name and a callable object.
The callable object is usually a function that takes the configurator instance as its first argument and accepts
other arbitrary positional and keyword arguments. For example:

1 from pyramid.events import NewRequest


2 from pyramid.config import Configurator
3

4 def add_newrequest_subscriber(config, subscriber):


5 config.add_subscriber(subscriber, NewRequest)
6

7 if __name__ == '__main__':
8 config = Configurator()
9 config.add_directive('add_newrequest_subscriber',
10 add_newrequest_subscriber)

Once add_directive() is called, a user can then call the added directive by its given name as if it
were a built-in method of the Configurator:

1 def mysubscriber(event):
2 print(event.request)
3

4 config.add_newrequest_subscriber(mysubscriber)

A call to add_directive() is often ”hidden” within an includeme function within a ”frameworky”


package meant to be included as per Including Configuration from External Sources via include(). For
example, if you put this code in a package named pyramid_subscriberhelpers:

0.3. Narrative Documentation 695


The Pyramid Web Framework, Version 1.9.4

1 def includeme(config):
2 config.add_directive('add_newrequest_subscriber',
3 add_newrequest_subscriber)

The user of the add-on package pyramid_subscriberhelpers would then be able to install it and
subsequently do:

1 def mysubscriber(event):
2 print(event.request)
3

4 from pyramid.config import Configurator


5 config = Configurator()
6 config.include('pyramid_subscriberhelpers')
7 config.add_newrequest_subscriber(mysubscriber)

Using config.action in a Directive

If a custom directive can’t do its work exclusively in terms of existing configurator methods (such as
pyramid.config.Configurator.add_subscriber() as above), the directive may need to
make use of the pyramid.config.Configurator.action() method. This method adds an entry
to the list of ”actions” that Pyramid will attempt to process when pyramid.config.Configurator.
commit() is called. An action is simply a dictionary that includes a discriminator, possibly a callback
function, and possibly other metadata used by Pyramid’s action system.

Here’s an example directive which uses the ”action” method:

1 def add_jammyjam(config, jammyjam):


2 def register():
3 config.registry.jammyjam = jammyjam
4 config.action('jammyjam', register)
5

6 if __name__ == '__main__':
7 config = Configurator()
8 config.add_directive('add_jammyjam', add_jammyjam)

Fancy, but what does it do? The action method accepts a number of arguments. In the above directive
named add_jammyjam, we call action() with two arguments: the string jammyjam is passed as
the first argument named discriminator, and the closure function named register is passed as the
second argument named callable.

696 Contents
The Pyramid Web Framework, Version 1.9.4

When the action() method is called, it appends an action to the list of pending configuration actions. All
pending actions with the same discriminator value are potentially in conflict with one another (see Conflict
Detection). When the commit() method of the Configurator is called (either explicitly or as the result
of calling make_wsgi_app()), conflicting actions are potentially automatically resolved as per Auto-
matic Conflict Resolution. If a conflict cannot be automatically resolved, a pyramid.exceptions.
ConfigurationConflictError is raised and application startup is prevented.

In our above example, therefore, if a consumer of our add_jammyjam directive did this:

config.add_jammyjam('first')
config.add_jammyjam('second')

When the action list was committed resulting from the set of calls above, our user’s application would not
start, because the discriminators of the actions generated by the two calls are in direct conflict. Automatic
conflict resolution cannot resolve the conflict (because no config.include is involved), and the user
provided no intermediate pyramid.config.Configurator.commit() call between the calls to
add_jammyjam to ensure that the successive calls did not conflict with each other.

This demonstrates the purpose of the discriminator argument to the action method: it’s used to indicate a
uniqueness constraint for an action. Two actions with the same discriminator will conflict unless the conflict
is automatically or manually resolved. A discriminator can be any hashable object, but it is generally a
string or a tuple. You use a discriminator to declaratively ensure that the user doesn’t provide ambiguous
configuration statements.

But let’s imagine that a consumer of add_jammyjam used it in such a way that no configuration conflicts
are generated.

config.add_jammyjam('first')

What happens now? When the add_jammyjam method is called, an action is appended to the pending
actions list. When the pending configuration actions are processed during commit(), and no conflicts
occur, the callable provided as the second argument to the action() method within add_jammyjam
is called with no arguments. The callable in add_jammyjam is the register closure function. It
simply sets the value config.registry.jammyjam to whatever the user passed in as the jammyjam
argument to the add_jammyjam function. Therefore, the result of the user’s call to our directive will set
the jammyjam attribute of the registry to the string first. A callable is used by a directive to defer the
result of a user’s call to the directive until conflict detection has had a chance to do its job.

Other arguments exist to the action() method, including args, kw, order, and
introspectables.

args and kw exist as values, which if passed will be used as arguments to the callable function when
it is called back. For example, our directive might use them like so:

0.3. Narrative Documentation 697


The Pyramid Web Framework, Version 1.9.4

1 def add_jammyjam(config, jammyjam):


2 def register(*arg, **kw):
3 config.registry.jammyjam_args = arg
4 config.registry.jammyjam_kw = kw
5 config.registry.jammyjam = jammyjam
6 config.action('jammyjam', register, args=('one',), kw={'two':
,→'two'})

In the above example, when this directive is used to generate an action, and that action is commit-
ted, config.registry.jammyjam_args will be set to ('one',) and config.registry.
jammyjam_kw will be set to {'two':'two'}. args and kw are honestly not very useful when your
callable is a closure function, because you already usually have access to every local in the directive
without needing them to be passed back. They can be useful, however, if you don’t use a closure as a
callable.

order is a crude order control mechanism. order defaults to the integer 0; it can be set to any
other integer. All actions that share an order will be called before other actions that share a higher
order. This makes it possible to write a directive with callable logic that relies on the execution
of the callable of another directive being done first. For example, Pyramid’s pyramid.config.
Configurator.add_view() directive registers an action with a higher order than the pyramid.
config.Configurator.add_route() method. Due to this, the add_view method’s callable
can assume that, if a route_name was passed to it, that a route by this name was already registered by
add_route, and if such a route has not already been registered, it’s a configuration error (a view that
names a nonexistent route via its route_name parameter will never be called).

Changed in version 1.6: As of Pyramid 1.6 it is possible for one action to invoke another. See Ordering
Actions for more information.

Finally, introspectables is a sequence of introspectable objects. You can pass a sequence of intro-
spectables to the action() method, which allows you to augment Pyramid’s configuration introspection
system.

Ordering Actions

In Pyramid every action has an inherent ordering relative to other actions. The logic within actions
is deferred until a call to pyramid.config.Configurator.commit() (which is automatically
invoked by pyramid.config.Configurator.make_wsgi_app()). This means you may call
config.add_view(route_name='foo') before config.add_route('foo', '/foo')
because nothing actually happens until commit-time. During a commit cycle, conflicts are resolved, and
actions are ordered and executed.

698 Contents
The Pyramid Web Framework, Version 1.9.4

By default, almost every action in Pyramid has an order of pyramid.config.PHASE3_CONFIG.


Every action within the same order-level will be executed in the order it was called. This means that
if an action must be reliably executed before or after another action, the order must be defined ex-
plicitly to make this work. For example, views are dependent on routes being defined. Thus the ac-
tion created by pyramid.config.Configurator.add_route() has an order of pyramid.
config.PHASE2_CONFIG.

Pre-defined Phases

pyramid.config.PHASE0_CONFIG

• This phase is reserved for developers who want to execute actions prior to Pyramid’s core directives.

pyramid.config.PHASE1_CONFIG

• pyramid.config.Configurator.add_renderer()

• pyramid.config.Configurator.add_route_predicate()

• pyramid.config.Configurator.add_subscriber_predicate()

• pyramid.config.Configurator.add_view_predicate()

• pyramid.config.Configurator.add_view_deriver()

• pyramid.config.Configurator.override_asset()

• pyramid.config.Configurator.set_authorization_policy()

• pyramid.config.Configurator.set_default_csrf_options()

• pyramid.config.Configurator.set_default_permission()

• pyramid.config.Configurator.set_view_mapper()

pyramid.config.PHASE2_CONFIG

• pyramid.config.Configurator.add_route()

• pyramid.config.Configurator.set_authentication_policy()

pyramid.config.PHASE3_CONFIG

• The default for all builtin or custom directives unless otherwise specified.

0.3. Narrative Documentation 699


The Pyramid Web Framework, Version 1.9.4

Calling Actions from Actions

New in version 1.6.

Pyramid’s configurator allows actions to be added during a commit-cycle as long as they are added to the
current or a later order phase. This means that your custom action can defer decisions until commit-
time and then do things like invoke pyramid.config.Configurator.add_route(). It can also
provide better conflict detection if your addon needs to call more than one other action.

For example, let’s make an addon that invokes add_route and add_view, but we want it to conflict
with any other call to our addon:

1 from pyramid.config import PHASE0_CONFIG


2

3 def includeme(config):
4 config.add_directive('add_auto_route', add_auto_route)
5

6 def add_auto_route(config, name, view):


7 def register():
8 config.add_view(route_name=name, view=view)
9 config.add_route(name, '/' + name)
10 config.action(('auto route', name), register, order=PHASE0_
,→CONFIG)

Now someone else can use your addon and be informed if there is a conflict between this route and an-
other, or two calls to add_auto_route. Notice how we had to invoke our action before add_view or
add_route. If we tried to invoke this afterward, the subsequent calls to add_view and add_route
would cause conflicts because that phase had already been executed, and the configurator cannot go back
in time to add more views during that commit-cycle.

1 from pyramid.config import Configurator


2

3 def main(global_config, **settings):


4 config = Configurator()
5 config.include('auto_route_addon')
6 config.add_auto_route('foo', my_view)
7

8 def my_view(request):
9 return request.response

700 Contents
The Pyramid Web Framework, Version 1.9.4

Adding Configuration Introspection

New in version 1.3.

Pyramid provides a configuration introspection system that can be used by debugging tools to provide
visibility into the configuration of a running application.

All built-in Pyramid directives (such as pyramid.config.Configurator.add_view() and


pyramid.config.Configurator.add_route()) register a set of introspectables when called.
For example, when you register a view via add_view, the directive registers at least one introspectable:
an introspectable about the view registration itself, providing human-consumable values for the arguments
passed into it. You can later use the introspection query system to determine whether a particular view
uses a renderer, or whether a particular view is limited to a particular request method, or against which
routes a particular view is registered. The Pyramid ”debug toolbar” makes use of the introspection system
in various ways to display information to Pyramid developers.

Introspection values are set when a sequence of introspectable objects is passed to the action() method.
Here’s an example of a directive which uses introspectables:

1 def add_jammyjam(config, value):


2 def register():
3 config.registry.jammyjam = value
4 intr = config.introspectable(category_name='jammyjams',
5 discriminator='jammyjam',
6 title='a jammyjam',
7 type_name=None)
8 intr['value'] = value
9 config.action('jammyjam', register, introspectables=(intr,))
10

11 if __name__ == '__main__':
12 config = Configurator()
13 config.add_directive('add_jammyjam', add_jammyjam)

If you notice, the above directive uses the introspectable attribute of a Configurator (pyramid.
config.Configurator.introspectable) to create an introspectable object. The introspectable
object’s constructor requires at least four arguments: the category_name, the discriminator, the
title, and the type_name.

The category_name is a string representing the logical category for this introspectable. Usually the
category_name is a pluralization of the type of object being added via the action.

The discriminator is a value unique within the category (unlike the action discriminator, which must
be unique within the entire set of actions). It is typically a string or tuple representing the values unique

0.3. Narrative Documentation 701


The Pyramid Web Framework, Version 1.9.4

to this introspectable within the category. It is used to generate links and as part of a relationship-forming
target for other introspectables.

The title is a human-consumable string that can be used by introspection system frontends to show a
friendly summary of this introspectable.

The type_name is a value that can be used to subtype this introspectable within its category for sorting
and presentation purposes. It can be any value.

An introspectable is also dictionary-like. It can contain any set of key/value pairs, typically related to the
arguments passed to its related directive. While the category_name, discriminator, title, and
type_name are metadata about the introspectable, the values provided as key/value pairs are the actual
data provided by the introspectable. In the above example, we set the value key to the value of the value
argument passed to the directive.

Our directive above mutates the introspectable, and passes it in to the action method as the first element
of a tuple as the value of the introspectable keyword argument. This associates this introspectable
with the action. Introspection tools will then display this introspectable in their index.

Introspectable Relationships

Two introspectables may have relationships between each other.

1 def add_jammyjam(config, value, template):


2 def register():
3 config.registry.jammyjam = (value, template)
4 intr = config.introspectable(category_name='jammyjams',
5 discriminator='jammyjam',
6 title='a jammyjam',
7 type_name=None)
8 intr['value'] = value
9 tmpl_intr = config.introspectable(category_name='jammyjam␣
,→templates',

10 discriminator=template,
11 title=template,
12 type_name=None)
13 tmpl_intr['value'] = template
14 intr.relate('jammyjam templates', template)
15 config.action('jammyjam', register, introspectables=(intr, tmpl_
,→intr))

16

(continues on next page)

702 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


17 if __name__ == '__main__':
18 config = Configurator()
19 config.add_directive('add_jammyjam', add_jammyjam)

In the above example, the add_jammyjam directive registers two introspectables: the first is related to
the value passed to the directive, and the second is related to the template passed to the directive. If
you believe a concept within a directive is important enough to have its own introspectable, you can cause
the same directive to register more than one introspectable, registering one introspectable for the ”main
idea” and another for a related concept.

The call to intr.relate above (pyramid.interfaces.IIntrospectable.relate()) is


passed two arguments: a category name and a directive. The example above effectively indicates that
the directive wishes to form a relationship between the intr introspectable and the tmpl_intr intro-
spectable; the arguments passed to relate are the category name and discriminator of the tmpl_intr
introspectable.

Relationships need not be made between two introspectables created by the same directive. Instead a re-
lationship can be formed between an introspectable created in one directive and another introspectable
created in another by calling relate on either side with the other directive’s category name and discrim-
inator. An error will be raised at configuration commit time if you attempt to relate an introspectable with
another nonexistent introspectable, however.

Introspectable relationships will show up in frontend system renderings of introspection values. For ex-
ample, if a view registration names a route name, the introspectable related to the view callable will show
a reference to the route to which it relates and vice versa.

0.3.36 Pyramid cookiecutters

New in version 1.8.

A cookiecutter is a command-line utility that creates projects from cookiecutters (project templates), e.g.,
creating a Python package project from a Python package project template.

Pyramid cookiecutters have replaced the now deprecated Pyramid scaffolds, and should be used going
forward. Pyramid cookiecutters released under the Pylons Project include:

• pyramid-cookiecutter-alchemy

• pyramid-cookiecutter-starter

0.3. Narrative Documentation 703


The Pyramid Web Framework, Version 1.9.4

• pyramid-cookiecutter-zodb

See also:

See also Cookiecutter Installation and Cookiecutter Features. Development of cookiecutters is documented
under Learn the Basics of Cookiecutter by Creating a Cookiecutter.

See also:

See also scaffold.

0.3.37 Creating Pyramid Scaffolds

Deprecated since version 1.8: Scaffolds and the pcreate script used to generate Pyramid projects from
scaffolds have been deprecated. Use Pyramid cookiecutters instead.

You can extend Pyramid by creating a scaffold template. A scaffold template is useful if you’d like to
distribute a customizable configuration of Pyramid to other users. Once you’ve created a scaffold, and
someone has installed the distribution that houses the scaffold, they can use the pcreate script to create
a custom version of your scaffold’s template. Pyramid itself uses scaffolds to allow people to bootstrap new
projects. For example, pcreate -s alchemy MyStuff causes Pyramid to render the alchemy
scaffold template to the MyStuff directory.

Basics

A scaffold template is just a bunch of source files and directories on disk. A small definition class points
at this directory. It is in turn pointed at by a setuptools ”entry point” which registers the scaffold so it can
be found by the pcreate command.

To create a scaffold template, create a Python distribution to house the scaffold which includes a setup.
py that relies on the setuptools package. See Packaging and Distributing Projects for more information
about how to do this. For example, we’ll pretend the distribution you create is named CoolExtension,
and it has a package directory within it named coolextension.

Once you’ve created the distribution, put a ”scaffolds” directory within your distribution’s package direc-
tory, and create a file within that directory named __init__.py with something like the following:

704 Contents
The Pyramid Web Framework, Version 1.9.4

1 # CoolExtension/coolextension/scaffolds/__init__.py
2

3 from pyramid.scaffolds import PyramidTemplate


4

5 class CoolExtensionTemplate(PyramidTemplate):
6 _template_dir = 'coolextension_scaffold'
7 summary = 'My cool extension'

Once this is done, within the scaffolds directory, create a template directory. Our example used a
template directory named coolextension_scaffold.

As you create files and directories within the template directory, note that:

• Files which have a name which are suffixed with the value _tmpl will be rendered, and replacing
any instance of the literal string {{var}} with the string value of the variable named var provided
to the scaffold.

• Files and directories with filenames that contain the string +var+ will have that string replaced with
the value of the var variable provided to the scaffold.

• Files that start with a dot (e.g., .env) are ignored and will not be copied over to the destination
directory. If you want to include a file with a leading dot, then you must replace the dot with +dot+
(e.g., +dot+env).

Otherwise, files and directories which live in the template directory will be copied directly without modi-
fication to the pcreate output location.

The variables provided by the default PyramidTemplate include project (the project name provided
by the user as an argument to pcreate), package (a lowercasing and normalizing of the project name
provided by the user), random_string (a long random string), and package_logger (the name of
the package’s logger).

See Pyramid’s ”scaffolds” package (https://github.com/Pylons/pyramid/tree/master/pyramid/scaffolds) for


concrete examples of scaffold directories (zodb, alchemy, and starter, for example).

After you’ve created the template directory, add the following to the entry_points value of your dis-
tribution’s setup.py:

[pyramid.scaffold]
coolextension=coolextension.scaffolds:CoolExtensionTemplate

For example:

0.3. Narrative Documentation 705


The Pyramid Web Framework, Version 1.9.4

def setup(
...,
entry_points = """\
[pyramid.scaffold]
coolextension=coolextension.scaffolds:CoolExtensionTemplate
"""
)

Run your distribution’s setup.py develop or setup.py install command. After that, you
should be able to see your scaffolding template listed when you run pcreate -l. It will be named
coolextension because that’s the name we gave it in the entry point setup. Running pcreate -s
coolextension MyStuff will then render your scaffold to an output directory named MyStuff.

See the module documentation for pyramid.scaffolds for information about the API of the
pyramid.scaffolds.Template class and related classes. You can override methods of this class
to get special behavior.

Supporting Older Pyramid Versions

Because different versions of Pyramid handled scaffolding differently, if you want to have extension scaf-
folds that can work across Pyramid 1.0.X, 1.1.X, 1.2.X and 1.3.X, you’ll need to use something like this
bit of horror while defining your scaffold template:

1 try: # pyramid 1.0.X


2 # "pyramid.paster.paste_script..." doesn't exist past 1.0.X
3 from pyramid.paster import paste_script_template_renderer
4 from pyramid.paster import PyramidTemplate
5 except ImportError:
6 try: # pyramid 1.1.X, 1.2.X
7 # trying to import "paste_script_template_renderer" fails␣
,→on 1.3.X

8 from pyramid.scaffolds import paste_script_template_renderer


9 from pyramid.scaffolds import PyramidTemplate
10 except ImportError: # pyramid >=1.3a2
11 paste_script_template_renderer = None
12 from pyramid.scaffolds import PyramidTemplate
13

14 class CoolExtensionTemplate(PyramidTemplate):
15 _template_dir = 'coolextension_scaffold'
16 summary = 'My cool extension'
17 template_renderer = staticmethod(paste_script_template_renderer)

706 Contents
The Pyramid Web Framework, Version 1.9.4

And then in the setup.py of the package that contains your scaffold, define the template as a target of
both paste.paster_create_template (for paster create) and pyramid.scaffold (for
pcreate).

[paste.paster_create_template]
coolextension=coolextension.scaffolds:CoolExtensionTemplate
[pyramid.scaffold]
coolextension=coolextension.scaffolds:CoolExtensionTemplate

Doing this hideousness will allow your scaffold to work as a paster create target (under 1.0, 1.1, or
1.2) or as a pcreate target (under 1.3). If an invoker tries to run paster create against a scaffold
defined this way under 1.3, an error is raised instructing them to use pcreate instead.

If you want to support Pyramid 1.3 only, it’s much cleaner, and the API is stable:

1 from pyramid.scaffolds import PyramidTemplate


2

3 class CoolExtensionTemplate(PyramidTemplate):
4 _template_dir = 'coolextension_scaffold'
5 summary = 'My cool_extension'

You only need to specify a paste.paster_create_template entry point target in your setup.
py if you want your scaffold to be consumable by users of Pyramid 1.0, 1.1, or 1.2. To support only
1.3, specifying only the pyramid.scaffold entry point is good enough. If you want to support both
paster create and pcreate (meaning you want to support Pyramid 1.2 and some older version),
you’ll need to define both.

Examples

Existing third-party distributions which house scaffolding are available via PyPI. The pyramid_jqm,
pyramid_zcml, and pyramid_jinja2 packages house scaffolds. You can install and examine these
packages to see how they work in the quest to develop your own scaffolding.

0.3.38 Upgrading Pyramid

When a new version of Pyramid is released, it will sometimes deprecate a feature or remove a feature that
was deprecated in an older release. When features are removed from Pyramid, applications that depend
on those features will begin to break. This chapter explains how to ensure your Pyramid applications keep
working when you upgrade the Pyramid version you’re using.

0.3. Narrative Documentation 707


The Pyramid Web Framework, Version 1.9.4

About Release Numbering

Conventionally, application version numbering in Python is described as major.minor.micro. If


your Pyramid version is ”1.2.3”, it means you’re running a version of Pyramid with the major version
”1”, the minor version ”2” and the micro version ”3”. A ”major” release is one that increments the
first-dot number; 2.X.X might follow 1.X.X. A ”minor” release is one that increments the second-dot
number; 1.3.X might follow 1.2.X. A ”micro” release is one that increments the third-dot number; 1.2.3
might follow 1.2.2. In general, micro releases are ”bugfix-only”, and contain no new features, minor
releases contain new features but are largely backwards compatible with older versions, and a major
release indicates a large set of backwards incompatibilities.

The Pyramid core team is conservative when it comes to removing features. We don’t remove features
unnecessarily, but we’re human and we make mistakes which cause some features to be evolutionary dead
ends. Though we are willing to support dead-end features for some amount of time, some eventually have
to be removed when the cost of supporting them outweighs the benefit of keeping them around, because
each feature in Pyramid represents a certain documentation and maintenance burden.

Deprecation and removal policy

When a feature is scheduled for removal from Pyramid or any of its official add-ons, the core development
team takes these steps:

• Using the feature will begin to generate a DeprecationWarning, indicating the version in which the
feature became deprecated.

• A note is added to the documentation indicating that the feature is deprecated.

• A note is added to the Pyramid Change History about the deprecation.

When a deprecated feature is eventually removed:

• The feature is removed.

• A note is added to the Pyramid Change History about the removal.

708 Contents
The Pyramid Web Framework, Version 1.9.4

Features are never removed in micro releases. They are only removed in minor and major releases. Depre-
cated features are kept around for at least three minor releases from the time the feature became deprecated.
Therefore, if a feature is added in Pyramid 1.0, but it’s deprecated in Pyramid 1.1, it will be kept around
through all 1.1.X releases, all 1.2.X releases and all 1.3.X releases. It will finally be removed in the first
1.4.X release.

Sometimes features are ”docs-deprecated” instead of formally deprecated. This means that the feature will
be kept around indefinitely, but it will be removed from the documentation or a note will be added to the
documentation telling folks to use some other newer feature. This happens when the cost of keeping an old
feature around is very minimal and the support and documentation burden is very low. For example, we
might rename a function that is an API without changing the arguments it accepts. In this case, we’ll often
rename the function, and change the docs to point at the new function name, but leave around a backwards
compatibility alias to the old function name so older code doesn’t break.

”Docs deprecated” features tend to work ”forever”, meaning that they won’t be removed, and they’ll never
generate a deprecation warning. However, such changes are noted in the Pyramid Change History, so it’s
possible to know that you should change older spellings to newer ones to ensure that people reading your
code can find the APIs you’re using in the Pyramid docs.

Python support policy

At the time of a Pyramid version release, each supports all versions of Python through the end of their
lifespans. The end-of-life for a given version of Python is when security updates are no longer released.

• Python 3.2 Lifespan ends February 2016.

• Python 3.3 Lifespan ends September 2017.

• Python 3.4 Lifespan TBD.

• Python 3.5 Lifespan TBD.

• Python 3.6 Lifespan December 2021.

To determine the Python support for a specific release of Pyramid, view its tox.ini file at the root of
the repository’s version.

0.3. Narrative Documentation 709


The Pyramid Web Framework, Version 1.9.4

Consulting the change history

Your first line of defense against application failures caused by upgrading to a newer Pyramid release is
always to read the Pyramid Change History to find the deprecations and removals for each release be-
tween the release you’re currently running and the one to which you wish to upgrade. The change his-
tory notes every deprecation within a Deprecation section and every removal within a Backwards
Incompatibilies section for each release.

The change history often contains instructions for changing your code to avoid deprecation warnings and
how to change docs-deprecated spellings to newer ones. You can follow along with each deprecation
explanation in the change history, simply doing a grep or other code search to your application, using the
change log examples to remediate each potential problem.

Testing your application under a new Pyramid release

Once you’ve upgraded your application to a new Pyramid release and you’ve remediated as much as pos-
sible by using the change history notes, you’ll want to run your application’s tests (see Run the tests) in
such a way that you can see DeprecationWarnings printed to the console when the tests run.

$ python -Wd setup.py test -q

The -Wd argument tells Python to print deprecation warnings to the console. See the Python -W flag
documentation for more information.

As your tests run, deprecation warnings will be printed to the console explaining the deprecation and
providing instructions about how to prevent the deprecation warning from being issued. For example:

$ python -Wd setup.py test -q


# .. elided ...
running build_ext
/home/chrism/projects/pyramid/env27/myproj/myproj/views.py:3:
DeprecationWarning: static: The "pyramid.view.static" class is␣
,→deprecated

as of Pyramid 1.1; use the "pyramid.static.static_view" class␣


,→instead with

the "use_subpath" argument set to True.


from pyramid.view import static
.
--------------------------------------------------------------------
,→--

(continues on next page)

710 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


Ran 1 test in 0.014s

OK

In the above case, it’s line #3 in the myproj.views module (from pyramid.view import
static) that is causing the problem:

1 from pyramid.view import view_config


2

3 from pyramid.view import static


4 myview = static('static', 'static')

The deprecation warning tells me how to fix it, so I can change the code to do things the newer way:

1 from pyramid.view import view_config


2

3 from pyramid.static import static_view


4 myview = static_view('static', 'static', use_subpath=True)

When I run the tests again, the deprecation warning is no longer printed to my console:

$ python -Wd setup.py test -q


# .. elided ...
running build_ext
.
--------------------------------------------------------------------
,→--

Ran 1 test in 0.014s

OK

My application doesn’t have any tests or has few tests

If your application has no tests, or has only moderate test coverage, running tests won’t tell you very much,
because the Pyramid codepaths that generate deprecation warnings won’t be executed.

In this circumstance, you can start your application interactively under a server run with the
PYTHONWARNINGS environment variable set to default. On UNIX, you can do that via:

0.3. Narrative Documentation 711


The Pyramid Web Framework, Version 1.9.4

$ PYTHONWARNINGS=default $VENV/bin/pserve development.ini

On Windows, you need to issue two commands:

c:\> set PYTHONWARNINGS=default


c:\> Scripts\pserve development.ini

At this point, it’s ensured that deprecation warnings will be printed to the console whenever a codepath is
hit that generates one. You can then click around in your application interactively to try to generate them,
and remediate as explained in Testing your application under a new Pyramid release.

See the PYTHONWARNINGS environment variable documentation or the Python -W flag documentation
for more information.

Upgrading to the very latest Pyramid release

When you upgrade your application to the most recent Pyramid release, it’s advisable to upgrade step-wise
through each most recent minor release, beginning with the one that you know your application currently
runs under, and ending on the most recent release. For example, if your application is running in production
on Pyramid 1.2.1, and the most recent Pyramid 1.3 release is Pyramid 1.3.3, and the most recent Pyramid
release is 1.4.4, it’s advisable to do this:

• Upgrade your environment to the most recent 1.2 release. For example, the most recent 1.2 release
might be 1.2.3, so upgrade to it. Then run your application’s tests under 1.2.3 as described in Testing
your application under a new Pyramid release. Note any deprecation warnings and remediate.

• Upgrade to the most recent 1.3 release, 1.3.3. Run your application’s tests, note any deprecation
warnings, and remediate.

• Upgrade to 1.4.4. Run your application’s tests, note any deprecation warnings, and remediate.

If you skip testing your application under each minor release (for example if you upgrade directly from
1.2.1 to 1.4.4), you might miss a deprecation warning and waste more time trying to figure out an error
caused by a feature removal than it would take to upgrade stepwise through each minor release.

712 Contents
The Pyramid Web Framework, Version 1.9.4

0.3.39 Thread Locals

A thread local variable is a variable that appears to be a ”global” variable to an application which uses
it. However, unlike a true global variable, one thread or process serving the application may receive a
different value than another thread or process when that variable is ”thread local”.

When a request is processed, Pyramid makes two thread local variables available to the application: a
”registry” and a ”request”.

Why and How Pyramid Uses Thread Local Variables

How are thread locals beneficial to Pyramid and application developers who use Pyramid? Well, usually
they’re decidedly not. Using a global or a thread local variable in any application usually makes it a lot
harder to understand for a casual reader. Use of a thread local or a global is usually just a way to avoid
passing some value around between functions, which is itself usually a very bad idea, at least if code
readability counts as an important concern.

For historical reasons, however, thread local variables are indeed consulted by various Pyramid
API functions. For example, the implementation of the pyramid.security function named
authenticated_userid() (deprecated as of 1.5) retrieves the thread local application registry
as a matter of course to find an authentication policy. It uses the pyramid.threadlocal.
get_current_registry() function to retrieve the application registry, from which it looks up the
authentication policy; it then uses the authentication policy to retrieve the authenticated user id. This is
how Pyramid allows arbitrary authentication policies to be ”plugged in”.

When they need to do so, Pyramid internals use two API functions to retrieve the request and application
registry: get_current_request() and get_current_registry(). The former returns the
”current” request; the latter returns the ”current” registry. Both get_current_* functions retrieve an
object from a thread-local data structure. These API functions are documented in pyramid.threadlocal.

These values are thread locals rather than true globals because one Python process may be handling multi-
ple simultaneous requests or even multiple Pyramid applications. If they were true globals, Pyramid could
not handle multiple simultaneous requests or allow more than one Pyramid application instance to exist in
a single Python process.

Because one Pyramid application is permitted to call another Pyramid application from its own view code
(perhaps as a WSGI app with help from the pyramid.wsgi.wsgiapp2() decorator), these variables
are managed in a stack during normal system operations. The stack instance itself is a threading.
local.

During normal operations, the thread locals stack is managed by a Router object. At the beginning of a
request, the Router pushes the application’s registry and the request on to the stack. At the end of a request,

0.3. Narrative Documentation 713


The Pyramid Web Framework, Version 1.9.4

the stack is popped. The topmost request and registry on the stack are considered ”current”. Therefore,
when the system is operating normally, the very definition of ”current” is defined entirely by the behavior
of a pyramid Router.

However, during unit testing, no Router code is ever invoked, and the definition of ”current” is defined by
the boundary between calls to the pyramid.config.Configurator.begin() and pyramid.
config.Configurator.end() methods (or between calls to the pyramid.testing.setUp()
and pyramid.testing.tearDown() functions). These functions push and pop the threadlocal stack
when the system is under test. See Test Set Up and Tear Down for the definitions of these functions.

Scripts which use Pyramid machinery but never actually start a WSGI server or receive requests via HTTP,
such as scripts which use the pyramid.scripting API, will never cause any Router code to be exe-
cuted. However, the pyramid.scripting APIs also push some values on to the thread locals stack
as a matter of course. Such scripts should expect the get_current_request() function to always
return None, and should expect the get_current_registry() function to return exactly the same
application registry for every request.

Why You Shouldn’t Abuse Thread Locals

You probably should almost never use the get_current_request() or


get_current_registry() functions, except perhaps in tests. In particular, it’s almost al-
ways a mistake to use get_current_request or get_current_registry in application
code because its usage makes it possible to write code that can be neither easily tested nor scripted.
Inappropriate usage is defined as follows:

• get_current_request should never be called within the body of a view callable, or within
code called by a view callable. View callables already have access to the request (it’s passed in to
each as request).

• get_current_request should never be called in resource code. If a resource needs access to


the request, it should be passed the request by a view callable.

• get_current_request function should never be called because it’s ”easier” or ”more elegant”
to think about calling it than to pass a request through a series of function calls when creating some
API design. Your application should instead, almost certainly, pass around data derived from the
request rather than relying on being able to call this function to obtain the request in places that
actually have no business knowing about it. Parameters are meant to be passed around as function
arguments; this is why they exist. Don’t try to ”save typing” or create ”nicer APIs” by using this
function in the place where a request is required; this will only lead to sadness later.

714 Contents
The Pyramid Web Framework, Version 1.9.4

• Neither get_current_request nor get_current_registry should ever be called within


application-specific forks of third-party library code. The library you’ve forked almost certainly has
nothing to do with Pyramid, and making it dependent on Pyramid (rather than making your pyramid
application depend upon it) means you’re forming a dependency in the wrong direction.
Use of the get_current_request() function in application code is still useful in very limited cir-
cumstances. As a rule of thumb, usage of get_current_request is useful within code which is
meant to eventually be removed. For instance, you may find yourself wanting to deprecate some API that
expects to be passed a request object in favor of one that does not expect to be passed a request object. But
you need to keep implementations of the old API working for some period of time while you deprecate the
older API. So you write a ”facade” implementation of the new API which calls into the code which imple-
ments the older API. Since the new API does not require the request, your facade implementation doesn’t
have local access to the request when it needs to pass it into the older API implementation. After some pe-
riod of time, the older implementation code is disused and the hack that uses get_current_request
is removed. This would be an appropriate place to use the get_current_request.
Use of the get_current_registry() function should be limited to testing scenarios. The registry
made current by use of the pyramid.config.Configurator.begin() method during a test (or
via pyramid.testing.setUp()) when you do not pass one in is available to you via this API.

0.3.40 Using the Zope Component Architecture in Pyramid

Under the hood, Pyramid uses a Zope Component Architecture component registry as its application reg-
istry. The Zope Component Architecture is referred to colloquially as the ”ZCA.”
The zope.component API used to access data in a traditional Zope application can be opaque. For
example, here is a typical ”unnamed utility” lookup using the zope.component.getUtility()
global API as it might appear in a traditional Zope application:

1 from pyramid.interfaces import ISettings


2 from zope.component import getUtility
3 settings = getUtility(ISettings)

After this code runs, settings will be a Python dictionary. But it’s unlikely that any ”civilian” will be
able to figure this out just by reading the code casually. When the zope.component.getUtility
API is used by a developer, the conceptual load on a casual reader of code is high.
While the ZCA is an excellent tool with which to build a framework such as Pyramid, it is not always
the best tool with which to build an application due to the opacity of the zope.component APIs.
Accordingly, Pyramid tends to hide the presence of the ZCA from application developers. You needn’t
understand the ZCA to create a Pyramid application; its use is effectively only a framework implementation
detail.
However, developers who are already used to writing Zope applications often still wish to use the ZCA
while building a Pyramid application. Pyramid makes this possible.

0.3. Narrative Documentation 715


The Pyramid Web Framework, Version 1.9.4

Using the ZCA global API in a Pyramid application

Zope uses a single ZCA registry—the ”global” ZCA registry—for all Zope applications that run in the
same Python process, effectively making it impossible to run more than one Zope application in a single
process.

However, for ease of deployment, it’s often useful to be able to run more than a single application per
process. For example, use of a PasteDeploy ”composite” allows you to run separate individual WSGI
applications in the same process, each answering requests for some URL prefix. This makes it possible to
run, for example, a TurboGears application at /turbogears and a Pyramid application at /pyramid,
both served up using the same WSGI server within a single Python process.

Most production Zope applications are relatively large, making it impractical due to memory constraints
to run more than one Zope application per Python process. However, a Pyramid application may be very
small and consume very little memory, so it’s a reasonable goal to be able to run more than one Pyramid
application per process.

In order to make it possible to run more than one Pyramid application in a single process, Pyramid defaults
to using a separate ZCA registry per application.

While this services a reasonable goal, it causes some issues when trying to use patterns which you might
use to build a typical Zope application to build a Pyramid application. Without special help, ZCA ”global”
APIs such as zope.component.getUtility() and zope.component.getSiteManager()
will use the ZCA ”global” registry. Therefore, these APIs will appear to fail when used in a Pyramid appli-
cation, because they’ll be consulting the ZCA global registry rather than the component registry associated
with your Pyramid application.

There are three ways to fix this: by disusing the ZCA global API entirely, by using pyramid.config.
Configurator.hook_zca() or by passing the ZCA global registry to the Configurator constructor
at startup time. We’ll describe all three methods in this section.

Disusing the global ZCA API

ZCA ”global” API functions such as zope.component.getSiteManager, zope.


component.getUtility, zope.component.getAdapter(), and zope.component.
getMultiAdapter() aren’t strictly necessary. Every component registry has a method API that
offers the same functionality; it can be used instead. For example, presuming the registry value
below is a Zope Component Architecture component registry, the following bit of code is equivalent to
zope.component.getUtility(IFoo):

716 Contents
The Pyramid Web Framework, Version 1.9.4

registry.getUtility(IFoo)

The full method API is documented in the zope.component package, but it largely mirrors the ”global”
API almost exactly.

If you are willing to disuse the ”global” ZCA APIs and use the method interface of a registry instead, you
need only know how to obtain the Pyramid component registry.

There are two ways of doing so:

• use the pyramid.threadlocal.get_current_registry() function within Pyramid


view or resource code. This will always return the ”current” Pyramid application registry.

• use the attribute of the request object named registry in your Pyramid view code, e.g.,
request.registry. This is the ZCA component registry related to the running Pyramid appli-
cation.

See Thread Locals for more information about pyramid.threadlocal.


get_current_registry().

Enabling the ZCA global API by using hook_zca

Consider the following bit of idiomatic Pyramid startup code:

1 from pyramid.config import Configurator


2

3 def app(global_settings, **settings):


4 config = Configurator(settings=settings)
5 config.include('some.other.package')
6 return config.make_wsgi_app()

When the app function above is run, a Configurator is constructed. When the configurator is created, it
creates a new application registry (a ZCA component registry). A new registry is constructed whenever
the registry argument is omitted, when a Configurator constructor is called, or when a registry
argument with a value of None is passed to a Configurator constructor.

During a request, the application registry created by the Configurator is ”made current”. This means calls
to get_current_registry() in the thread handling the request will return the component registry
associated with the application.

0.3. Narrative Documentation 717


The Pyramid Web Framework, Version 1.9.4

As a result, application developers can use get_current_registry to get the registry and thus get
access to utilities and such, as per Disusing the global ZCA API. But they still cannot use the global ZCA
API. Without special treatment, the ZCA global APIs will always return the global ZCA registry (the one
in zope.component.globalregistry.base).

To ”fix” this and make the ZCA global APIs use the ”current” Pyramid registry, you need to call
hook_zca() within your setup code. For example:

1 from pyramid.config import Configurator


2

3 def app(global_settings, **settings):


4 config = Configurator(settings=settings)
5 config.hook_zca()
6 config.include('some.other.application')
7 return config.make_wsgi_app()

We’ve added a line to our original startup code, line number 5, which calls config.hook_zca(). The
effect of this line under the hood is that an analogue of the following code is executed:

1 from zope.component import getSiteManager


2 from pyramid.threadlocal import get_current_registry
3 getSiteManager.sethook(get_current_registry)

This causes the ZCA global API to start using the Pyramid application registry in threads which are running
a Pyramid request.

Calling hook_zca is usually sufficient to ”fix” the problem of being able to use the global ZCA API
within a Pyramid application. However, it also means that a Zope application that is running in the same
process may start using the Pyramid global registry instead of the Zope global registry, effectively inverting
the original problem. In such a case, follow the steps in the next section, Enabling the ZCA global API by
using the ZCA global registry.

Enabling the ZCA global API by using the ZCA global registry

You can tell your Pyramid application to use the ZCA global registry at startup time instead of constructing
a new one:

718 Contents
The Pyramid Web Framework, Version 1.9.4

1 from zope.component import getGlobalSiteManager


2 from pyramid.config import Configurator
3

4 def app(global_settings, **settings):


5 globalreg = getGlobalSiteManager()
6 config = Configurator(registry=globalreg)
7 config.setup_registry(settings=settings)
8 config.include('some.other.application')
9 return config.make_wsgi_app()

Lines 5, 6, and 7 above are the interesting ones. Line 5 retrieves the global ZCA component registry.
Line 6 creates a Configurator, passing the global ZCA registry into its constructor as the registry
argument. Line 7 ”sets up” the global registry with Pyramid-specific registrations; this is code that is
normally executed when a registry is constructed rather than created, but we must call it ”by hand” when
we pass an explicit registry.

At this point, Pyramid will use the ZCA global registry rather than creating a new application-specific
registry. Since by default the ZCA global API will use this registry, things will work as you might expect
in a Zope app when you use the global ZCA API.

0.4 API Documentation

0.4.1 API Documentation

Comprehensive reference material for every public API exposed by Pyramid:

pyramid.authentication

Authentication Policies

class AuthTktAuthenticationPolicy(secret, callback=None,


cookie_name=’auth_tkt’, secure=False,
include_ip=False, timeout=None, reis-
sue_time=None, max_age=None, path=’/’,
http_only=False, wild_domain=True,
debug=False, hashalg=’sha512’, par-
ent_domain=False, domain=None)
A Pyramid authentication policy which obtains data from a Pyramid ”auth ticket” cookie.

0.4. API Documentation 719


The Pyramid Web Framework, Version 1.9.4

Constructor Arguments

secret

The secret (a string) used for auth_tkt cookie signing. This value should be unique across
all values provided to Pyramid for various subsystem secrets (see Admonishment Against
Secret-Sharing). Required.

callback

Default: None. A callback passed the userid and the request, expected to return None if
the userid doesn’t exist or a sequence of principal identifiers (possibly empty) if the user
does exist. If callback is None, the userid will be assumed to exist with no principals.
Optional.

cookie_name

Default: auth_tkt. The cookie name used (string). Optional.

secure

Default: False. Only send the cookie back over a secure conn. Optional.

include_ip

Default: False. Make the requesting IP address part of the authentication data in the
cookie. Optional.

For IPv6 this option is not recommended. The mod_auth_tkt specification does not
specify how to handle IPv6 addresses, so using this option in combination with IPv6
addresses may cause an incompatible cookie. It ties the authentication ticket to that in-
dividual’s IPv6 address.

timeout

Default: None. Maximum number of seconds which a newly issued ticket will be con-
sidered valid. After this amount of time, the ticket will expire (effectively logging the
user out). If this value is None, the ticket never expires. Optional.

reissue_time

720 Contents
The Pyramid Web Framework, Version 1.9.4

Default: None. If this parameter is set, it represents the number of seconds that must pass
before an authentication token cookie is automatically reissued as the result of a request
which requires authentication. The duration is measured as the number of seconds since
the last auth_tkt cookie was issued and ’now’. If this value is 0, a new ticket cookie will
be reissued on every request which requires authentication.

A good rule of thumb: if you want auto-expired cookies based on inactivity: set the
timeout value to 1200 (20 mins) and set the reissue_time value to perhaps a tenth
of the timeout value (120 or 2 mins). It’s nonsensical to set the timeout value lower
than the reissue_time value, as the ticket will never be reissued if so. However, such
a configuration is not explicitly prevented.

Optional.

max_age

Default: None. The max age of the auth_tkt cookie, in seconds. This differs from
timeout inasmuch as timeout represents the lifetime of the ticket contained in the
cookie, while this value represents the lifetime of the cookie itself. When this value
is set, the cookie’s Max-Age and Expires settings will be set, allowing the auth_tkt
cookie to last between browser sessions. It is typically nonsensical to set this to a value
that is lower than timeout or reissue_time, although it is not explicitly prevented.
Optional.

path

Default: /. The path for which the auth_tkt cookie is valid. May be desirable if the
application only serves part of a domain. Optional.

http_only

Default: False. Hide cookie from JavaScript by setting the HttpOnly flag. Not honored
by all browsers. Optional.

wild_domain

Default: True. An auth_tkt cookie will be generated for the wildcard domain. If your
site is hosted as example.com this will make the cookie available for sites underneath
example.com such as www.example.com. Optional.

parent_domain

0.4. API Documentation 721


The Pyramid Web Framework, Version 1.9.4

Default: False. An auth_tkt cookie will be generated for the parent domain of the
current site. For example if your site is hosted under www.example.com a cookie will
be generated for .example.com. This can be useful if you have multiple sites sharing
the same domain. This option supercedes the wild_domain option. Optional.
This option is available as of Pyramid 1.5.
domain
Default: None. If provided the auth_tkt cookie will only be set for this domain. This
option is not compatible with wild_domain and parent_domain. Optional.
This option is available as of Pyramid 1.5.
hashalg
Default: sha512 (the literal string).
Any hash algorithm supported by Python’s hashlib.new() function can be used as
the hashalg.
Cookies generated by different instances of AuthTktAuthenticationPolicy using differ-
ent hashalg options are not compatible. Switching the hashalg will imply that all
existing users with a valid cookie will be required to re-login.
This option is available as of Pyramid 1.4.
Optional.
debug
Default: False. If debug is True, log messages to the Pyramid debug logger about the
results of various authentication steps. The output from debugging is useful for reporting
to maillist or IRC channels when asking for support.
Objects of this class implement the interface described by pyramid.interfaces.
IAuthenticationPolicy.
authenticated_userid(request)
Return the authenticated userid or None.
If no callback is registered, this will be the same as unauthenticated_userid.
If a callback is registered, this will return the userid if and only if the callback returns a
value that is not None.
effective_principals(request)
A list of effective principals derived from request.
This will return a list of principals including, at least, pyramid.security.Everyone.
If there is no authenticated userid, or the callback returns None, this will be the only
principal:

722 Contents
The Pyramid Web Framework, Version 1.9.4

return [Everyone]

If the callback does not return None and an authenticated userid is found,
then the principals will include pyramid.security.Authenticated, the
authenticated_userid and the list of principals returned by the callback:

extra_principals = callback(userid, request)


return [Everyone, Authenticated, userid] + extra_principals

forget(request)
A list of headers which will delete appropriate cookies.

remember(request, userid, **kw)


Accepts the following kw args: max_age=<int-seconds>,
``tokens=<sequence-of-ascii-strings>.

Return a list of headers which will set appropriate cookies on the response.

unauthenticated_userid(request)
The userid key within the auth_tkt cookie.

class RemoteUserAuthenticationPolicy(environ_key=’REMOTE_USER’, call-


back=None, debug=False)
A Pyramid authentication policy which obtains data from the REMOTE_USER WSGI environment
variable.

Constructor Arguments

environ_key

Default: REMOTE_USER. The key in the WSGI environ which provides the userid.

callback

Default: None. A callback passed the userid and the request, expected to return None if
the userid doesn’t exist or a sequence of principal identifiers (possibly empty) represent-
ing groups if the user does exist. If callback is None, the userid will be assumed to
exist with no group principals.

debug

0.4. API Documentation 723


The Pyramid Web Framework, Version 1.9.4

Default: False. If debug is True, log messages to the Pyramid debug logger about the
results of various authentication steps. The output from debugging is useful for reporting
to maillist or IRC channels when asking for support.

Objects of this class implement the interface described by pyramid.interfaces.


IAuthenticationPolicy.

authenticated_userid(request)
Return the authenticated userid or None.

If no callback is registered, this will be the same as unauthenticated_userid.

If a callback is registered, this will return the userid if and only if the callback returns a
value that is not None.

effective_principals(request)
A list of effective principals derived from request.

This will return a list of principals including, at least, pyramid.security.Everyone.


If there is no authenticated userid, or the callback returns None, this will be the only
principal:

return [Everyone]

If the callback does not return None and an authenticated userid is found,
then the principals will include pyramid.security.Authenticated, the
authenticated_userid and the list of principals returned by the callback:

extra_principals = callback(userid, request)


return [Everyone, Authenticated, userid] + extra_principals

forget(request)
A no-op. The REMOTE_USER does not provide a protocol for forgetting the user. This will be
application-specific and can be done somewhere else or in a subclass.

remember(request, userid, **kw)


A no-op. The REMOTE_USER does not provide a protocol for remembering the user. This
will be application-specific and can be done somewhere else or in a subclass.

unauthenticated_userid(request)
The REMOTE_USER value found within the environ.

724 Contents
The Pyramid Web Framework, Version 1.9.4

class SessionAuthenticationPolicy(prefix=’auth.’, callback=None, debug=False)


A Pyramid authentication policy which gets its data from the configured session. For this authenti-
cation policy to work, you will have to follow the instructions in the Sessions to configure a session
factory.

Constructor Arguments

prefix

A prefix used when storing the authentication parameters in the session. Defaults to
’auth.’. Optional.

callback

Default: None. A callback passed the userid and the request, expected to return None if
the userid doesn’t exist or a sequence of principal identifiers (possibly empty) if the user
does exist. If callback is None, the userid will be assumed to exist with no principals.
Optional.

debug

Default: False. If debug is True, log messages to the Pyramid debug logger about the
results of various authentication steps. The output from debugging is useful for reporting
to maillist or IRC channels when asking for support.

authenticated_userid(request)
Return the authenticated userid or None.

If no callback is registered, this will be the same as unauthenticated_userid.

If a callback is registered, this will return the userid if and only if the callback returns a
value that is not None.

effective_principals(request)
A list of effective principals derived from request.

This will return a list of principals including, at least, pyramid.security.Everyone.


If there is no authenticated userid, or the callback returns None, this will be the only
principal:

return [Everyone]

If the callback does not return None and an authenticated userid is found,
then the principals will include pyramid.security.Authenticated, the
authenticated_userid and the list of principals returned by the callback:

0.4. API Documentation 725


The Pyramid Web Framework, Version 1.9.4

extra_principals = callback(userid, request)


return [Everyone, Authenticated, userid] + extra_principals

forget(request)
Remove the stored userid from the session.

remember(request, userid, **kw)


Store a userid in the session.

class BasicAuthAuthenticationPolicy(check, realm=’Realm’, debug=False)


A Pyramid authentication policy which uses HTTP standard basic authentication protocol to au-
thenticate users. To use this policy you will need to provide a callback which checks the supplied
user credentials against your source of login data.

Constructor Arguments

check

A callback function passed a username, password and request, in that order as positional
arguments. Expected to return None if the userid doesn’t exist or a sequence of principal
identifiers (possibly empty) if the user does exist.

realm

Default: "Realm". The Basic Auth Realm string. Usually displayed to the user by the
browser in the login dialog.

debug

Default: False. If debug is True, log messages to the Pyramid debug logger about the
results of various authentication steps. The output from debugging is useful for reporting
to maillist or IRC channels when asking for support.

Issuing a challenge

Regular browsers will not send username/password credentials unless they first receive a challenge
from the server. The following recipe will register a view that will send a Basic Auth challenge to
the user whenever there is an attempt to call a view which results in a Forbidden response:

726 Contents
The Pyramid Web Framework, Version 1.9.4

from pyramid.httpexceptions import HTTPUnauthorized


from pyramid.security import forget
from pyramid.view import forbidden_view_config

@forbidden_view_config()
def forbidden_view(request):
if request.authenticated_userid is None:
response = HTTPUnauthorized()
response.headers.update(forget(request))
return response
return HTTPForbidden()

authenticated_userid(request)
Return the authenticated userid or None.

If no callback is registered, this will be the same as unauthenticated_userid.

If a callback is registered, this will return the userid if and only if the callback returns a
value that is not None.

effective_principals(request)
A list of effective principals derived from request.

This will return a list of principals including, at least, pyramid.security.Everyone.


If there is no authenticated userid, or the callback returns None, this will be the only
principal:

return [Everyone]

If the callback does not return None and an authenticated userid is found,
then the principals will include pyramid.security.Authenticated, the
authenticated_userid and the list of principals returned by the callback:

extra_principals = callback(userid, request)


return [Everyone, Authenticated, userid] + extra_principals

forget(request)
Returns challenge headers. This should be attached to a response to indicate that credentials
are required.

0.4. API Documentation 727


The Pyramid Web Framework, Version 1.9.4

remember(request, userid, **kw)


A no-op. Basic authentication does not provide a protocol for remembering the user. Creden-
tials are sent on every request.

unauthenticated_userid(request)
The userid parsed from the Authorization request header.

class RepozeWho1AuthenticationPolicy(identifier_name=’auth_tkt’, call-


back=None)
A Pyramid authentication policy which obtains data from the repoze.who 1.X WSGI ’API’ (the
repoze.who.identity key in the WSGI environment).

Constructor Arguments

identifier_name

Default: auth_tkt. The repoze.who plugin name that performs remember/forget.


Optional.

callback

Default: None. A callback passed the repoze.who identity and the request, expected
to return None if the user represented by the identity doesn’t exist or a sequence of princi-
pal identifiers (possibly empty) representing groups if the user does exist. If callback
is None, the userid will be assumed to exist with no group principals.

Objects of this class implement the interface described by pyramid.interfaces.


IAuthenticationPolicy.

authenticated_userid(request)
Return the authenticated userid or None.

If no callback is registered, this will be the same as unauthenticated_userid.

If a callback is registered, this will return the userid if and only if the callback returns a
value that is not None.

effective_principals(request)
A list of effective principals derived from the identity.

This will return a list of principals including, at least, pyramid.security.Everyone.


If there is no identity, or the callback returns None, this will be the only principal.

If the callback does not return None and an identity is found, then the principals will
include pyramid.security.Authenticated, the authenticated_userid and
the list of principals returned by the callback.

728 Contents
The Pyramid Web Framework, Version 1.9.4

forget(request)
Forget the current authenticated user.

Return headers that, if included in a response, will delete the cookie responsible for tracking
the current user.

remember(request, userid, **kw)


Store the userid as repoze.who.userid.

The identity to authenticated to repoze.who will contain the given userid as userid, and
provide all keyword arguments as additional identity keys. Useful keys could be max_age or
userdata.

unauthenticated_userid(request)
Return the repoze.who.userid key from the detected identity.

Helper Classes

class AuthTktCookieHelper(secret, cookie_name=’auth_tkt’, se-


cure=False, include_ip=False, timeout=None,
reissue_time=None, max_age=None,
http_only=False, path=’/’, wild_domain=True,
hashalg=’md5’, parent_domain=False, do-
main=None)
A helper class for use in third-party authentication policy implementations.
See pyramid.authentication.AuthTktAuthenticationPolicy for the
meanings of the constructor arguments.

class AuthTicket(secret, userid, ip, tokens=(), user_data=”,


time=None, cookie_name=’auth_tkt’, secure=False,
hashalg=’md5’)
This class represents an authentication token. You must pass in the shared secret,
the userid, and the IP address. Optionally you can include tokens (a list of strings,
representing role names), ’user_data’, which is arbitrary data available for your own
use in later scripts. Lastly, you can override the cookie name and timestamp.

Once you provide all the arguments, use .cookie_value() to generate the appropriate
authentication ticket.

Usage:

0.4. API Documentation 729


The Pyramid Web Framework, Version 1.9.4

token = AuthTicket('sharedsecret', 'username',


os.environ['REMOTE_ADDR'], tokens=['admin'])
val = token.cookie_value()

exception BadTicket(msg, expected=None)


Exception raised when a ticket can’t be parsed. If we get far enough to determine
what the expected digest should have been, expected is set. This should not be
shown by default, but can be useful for debugging.

forget(request)
Return a set of expires Set-Cookie headers, which will destroy any existing auth_tkt
cookie when attached to a response

identify(request)
Return a dictionary with authentication information, or None if no valid auth_tkt
is attached to request

static parse_ticket(secret, ticket, ip, hashalg=’md5’)


Parse the ticket, returning (timestamp, userid, tokens, user_data).

If the ticket cannot be parsed, a BadTicket exception will be raised with an ex-
planation.

remember(request, userid, max_age=None, tokens=())


Return a set of Set-Cookie headers; when set into a response, these headers will
represent a valid authentication ticket.
max_age The max age of the auth_tkt cookie, in seconds. When this value is set,
the cookie’s Max-Age and Expires settings will be set, allowing the auth_tkt
cookie to last between browser sessions. If this value is None, the max_age
value provided to the helper itself will be used as the max_age value. Default:
None.
tokens A sequence of strings that will be placed into the auth_tkt tokens field.
Each string in the sequence must be of the Python str type and must match
the regex ^[A-Za-z][A-Za-z0-9+_-]*$. Tokens are available in the re-
turned identity when an auth_tkt is found in the request and unpacked. Default:
().

class HTTPBasicCredentials(username, password)

password
Alias for field number 1

username
Alias for field number 0

730 Contents
The Pyramid Web Framework, Version 1.9.4

Helper Functions

extract_http_basic_credentials(request)
A helper function for extraction of HTTP Basic credentials from a given request.
Returns a HTTPBasicCredentials 2-tuple with username and password at-
tributes or None if no credentials could be found.

pyramid.authorization

class ACLAuthorizationPolicy
An authorization policy which consults an ACL object attached to a context to determine autho-
rization information about a principal or multiple principals. If the context is part of a lineage, the
context’s parents are consulted for ACL information too. The following is true about this security
policy.
• When checking whether the ’current’ user is permitted (via the permits method), the secu-
rity policy consults the context for an ACL first. If no ACL exists on the context, or one does
exist but the ACL does not explicitly allow or deny access for any of the effective principals,
consult the context’s parent ACL, and so on, until the lineage is exhausted or we determine
that the policy permits or denies.
During this processing, if any pyramid.security.Deny ACE is found matching
any principal in principals, stop processing by returning an pyramid.security.
ACLDenied instance (equals False) immediately. If any pyramid.security.
Allow ACE is found matching any principal, stop processing by returning an pyramid.
security.ACLAllowed instance (equals True) immediately. If we exhaust the con-
text’s lineage, and no ACE has explicitly permitted or denied access, return an instance of
pyramid.security.ACLDenied (equals False).
• When computing principals allowed by a permission via the pyramid.security.
principals_allowed_by_permission() method, we compute the set of principals
that are explicitly granted the permission in the provided context. We do this by walk-
ing ’up’ the object graph from the root to the context. During this walking process, if we find an
explicit pyramid.security.Allow ACE for a principal that matches the permission,
the principal is included in the allow list. However, if later in the walking process that prin-
cipal is mentioned in any pyramid.security.Deny ACE for the permission, the prin-
cipal is removed from the allow list. If a pyramid.security.Deny to the principal
pyramid.security.Everyone is encountered during the walking process that matches
the permission, the allow list is cleared for all principals encountered in previous ACLs.
The walking process ends after we’ve processed the any ACL directly attached to context;
a set of principals is returned.
Objects of this class implement the pyramid.interfaces.IAuthorizationPolicy in-
terface.

0.4. API Documentation 731


The Pyramid Web Framework, Version 1.9.4

pyramid.compat

The pyramid.compat module provides platform and version compatibility for Pyramid and its add-
ons across Python platform and version differences. APIs will be removed from this module over time as
Pyramid ceases to support systems which require compatibility imports.

ascii_native_(s)
Python 3: If s is an instance of text_type, return s.encode('ascii'), otherwise return
str(s, 'ascii', 'strict')

Python 2: If s is an instance of text_type, return s.encode('ascii'), otherwise return


str(s)

binary_type
Binary type for this platform. For Python 3, it’s bytes. For Python 2, it’s str.

bytes_(s, encoding=’latin-1’, errors=’strict’)


If s is an instance of text_type, return s.encode(encoding, errors), otherwise return
s

class_types
Sequence of class types for this platform. For Python 3, it’s (type,). For Python 2, it’s (type,
types.ClassType).

configparser
On Python 2, the ConfigParser module, on Python 3, the configparser module.

escape(v)
On Python 2, the cgi.escape function, on Python 3, the html.escape function.

exec_(code, globs=None, locs=None)


Exec code in a compatible way on both Python 2 and 3.

im_func
On Python 2, the string value im_func, on Python 3, the string value __func__.

input_(v)
On Python 2, the raw_input function, on Python 3, the input function.

integer_types
Sequence of integer types for this platform. For Python 3, it’s (int,). For Python 2, it’s (int,
long).

732 Contents
The Pyramid Web Framework, Version 1.9.4

is_nonstr_iter(v)
Return True if v is a non-str iterable on both Python 2 and Python 3.

iteritems_(d)
Return d.items() on Python 3, d.iteritems() on Python 2.

itervalues_(d)
Return d.values() on Python 3, d.itervalues() on Python 2.

iterkeys_(d)
Return d.keys() on Python 3, d.iterkeys() on Python 2.

long
Long type for this platform. For Python 3, it’s int. For Python 2, it’s long.

map_(v)
Return list(map(v)) on Python 3, map(v) on Python 2.

pickle
cPickle module if it exists, pickle module otherwise.

PY3
True if running on Python 3, False otherwise.

PYPY
True if running on PyPy, False otherwise.

reraise(tp, value, tb=None)


Reraise an exception in a compatible way on both Python 2 and Python 3, e.g. reraise(*sys.
exc_info()).

string_types
Sequence of string types for this platform. For Python 3, it’s (str,). For Python 2, it’s
(basestring,).

SimpleCookie
On Python 2, the Cookie.SimpleCookie class, on Python 3, the http.cookies.
SimpleCookie module.

text_(s, encoding=’latin-1’, errors=’strict’)


If s is an instance of binary_type, return s.decode(encoding, errors), otherwise
return s

0.4. API Documentation 733


The Pyramid Web Framework, Version 1.9.4

text_type
Text type for this platform. For Python 3, it’s str. For Python 2, it’s unicode.

native_(s, encoding=’latin-1’, errors=’strict’)


Python 3: If s is an instance of text_type, return s, otherwise return str(s, encoding,
errors)

Python 2: If s is an instance of text_type, return s.encode(encoding, errors), oth-


erwise return str(s)

urlparse
urlparse module on Python 2, urllib.parse module on Python 3.

url_quote
urllib.quote function on Python 2, urllib.parse.quote function on Python 3.

url_quote_plus
urllib.quote_plus function on Python 2, urllib.parse.quote_plus function on
Python 3.

url_unquote
urllib.unquote function on Python 2, urllib.parse.unquote function on Python 3.

url_encode
urllib.urlencode function on Python 2, urllib.parse.urlencode function on Python
3.

url_open
urllib2.urlopen function on Python 2, urllib.request.urlopen function on Python
3.

url_unquote_text(v, encoding=’utf-8’, errors=’replace’)


On Python 2, return url_unquote(v).decode(encoding(encoding, errors)); on
Python 3, return the result of urllib.parse.unquote.

url_unquote_native(v, encoding=’utf-8’, errors=’replace’)


On Python 2, return native_(url_unquote_text_v, encoding, errors)); on
Python 3, return the result of urllib.parse.unquote.

734 Contents
The Pyramid Web Framework, Version 1.9.4

pyramid.config

class Configurator(registry=None, package=None, settings=None, root_factory=None,


authentication_policy=None, authorization_policy=None, ren-
derers=None, debug_logger=None, locale_negotiator=None,
request_factory=None, response_factory=None, de-
fault_permission=None, session_factory=None, de-
fault_view_mapper=None, autocommit=False, exceptionre-
sponse_view=<function default_exceptionresponse_view>,
route_prefix=None, introspection=True, root_package=None)
A Configurator is used to configure a Pyramid application registry.

The Configurator lifecycle can be managed by using a context manager to automatically


handle calling pyramid.config.Configurator.begin() and pyramid.config.
Configurator.end() as well as pyramid.config.Configurator.commit().

with Configurator(settings=settings) as config:


config.add_route('home', '/')
app = config.make_wsgi_app()

If the registry argument is not None, it must be an instance of the pyramid.registry.


Registry class representing the registry to configure. If registry is None, the configurator
will create a pyramid.registry.Registry instance itself; it will also perform some default
configuration that would not otherwise be done. After its construction, the configurator may be used
to add further configuration to the registry.

If registry is assigned the above-mentioned class instance, all other constructor argu-
ments are ignored, with the exception of package.

If the package argument is passed, it must be a reference to a Python package (e.g. sys.
modules['thepackage']) or a dotted Python name to the same. This value is used as a basis
to convert relative paths passed to various configuration methods, such as methods which accept a
renderer argument, into absolute paths. If None is passed (the default), the package is assumed
to be the Python package in which the caller of the Configurator constructor lives.

If the root_package is passed, it will propagate through the configuration hierarchy as a way for
included packages to locate resources relative to the package in which the main Configurator
was created. If None is passed (the default), the root_package will be derived from the

0.4. API Documentation 735


The Pyramid Web Framework, Version 1.9.4

package argument. The package attribute is always pointing at the package being included
when using include(), whereas the root_package does not change.

If the settings argument is passed, it should be a Python dictionary representing the deploy-
ment settings for this application. These are later retrievable using the pyramid.registry.
Registry.settings attribute (aka request.registry.settings).

If the root_factory argument is passed, it should be an object representing the default root
factory for your application or a dotted Python name to the same. If it is None, a default root
factory will be used.

If authentication_policy is passed, it should be an instance of an authentication policy or


a dotted Python name to the same.

If authorization_policy is passed, it should be an instance of an authorization policy or a


dotted Python name to the same.

A ConfigurationError will be raised when an authorization policy is supplied without


also supplying an authentication policy (authorization requires authentication).

If renderers is None (the default), a default set of renderer factories is used. Else, it should be a
list of tuples representing a set of renderer factories which should be configured into this application,
and each tuple representing a set of positional values that should be passed to pyramid.config.
Configurator.add_renderer().

If debug_logger is not passed, a default debug logger that logs to a logger will be used (the logger
name will be the package name of the caller of this configurator). If it is passed, it should be an
instance of the logging.Logger (PEP 282) standard library class or a Python logger name. The
debug logger is used by Pyramid itself to log warnings and authorization debugging information.

If locale_negotiator is passed, it should be a locale negotiator implementation or a dotted


Python name to same. See Using a Custom Locale Negotiator.

If request_factory is passed, it should be a request factory implementation or a dotted Python


name to the same. See Changing the Request Factory. By default it is None, which means use the
default request factory.

If response_factory is passed, it should be a response factory implementation or a dotted


Python name to the same. See Changing the Response Factory. By default it is None, which means
use the default response factory.

736 Contents
The Pyramid Web Framework, Version 1.9.4

If default_permission is passed, it should be a permission string to be used as the default


permission for all view configuration registrations performed against this Configurator. An exam-
ple of a permission string:'view'. Adding a default permission makes it unnecessary to protect
each view configuration with an explicit permission, unless your application policy requires some
exception for a particular view. By default, default_permission is None, meaning that view
configurations which do not explicitly declare a permission will always be executable by entirely
anonymous users (any authorization policy in effect is ignored).

See also:

See also Setting a Default Permission.

If session_factory is passed, it should be an object which implements the session factory


interface. If a nondefault value is passed, the session_factory will be used to create a ses-
sion object when request.session is accessed. Note that the same outcome can be achieved
by calling pyramid.config.Configurator.set_session_factory(). By default,
this argument is None, indicating that no session factory will be configured (and thus accessing
request.session will throw an error) unless set_session_factory is called later dur-
ing configuration.

If autocommit is True, every method called on the configurator will cause an immediate action,
and no configuration conflict detection will be used. If autocommit is False, most methods of
the configurator will defer their action until pyramid.config.Configurator.commit()
is called. When pyramid.config.Configurator.commit() is called, the actions implied
by the called methods will be checked for configuration conflicts unless autocommit is True. If
a conflict is detected, a ConfigurationConflictError will be raised. Calling pyramid.
config.Configurator.make_wsgi_app() always implies a final commit.

If default_view_mapper is passed, it will be used as the default view mapper fac-


tory for view configurations that don’t otherwise specify one (see pyramid.interfaces.
IViewMapperFactory). If default_view_mapper is not passed, a superdefault view map-
per will be used.

If exceptionresponse_view is passed, it must be a view callable or None. If it is


a view callable, it will be used as an exception view callable when an exception response is
raised. If exceptionresponse_view is None, no exception response view will be regis-
tered, and all raised exception responses will be bubbled up to Pyramid’s caller. By default, the
pyramid.httpexceptions.default_exceptionresponse_view function is used as
the exceptionresponse_view.

If route_prefix is passed, all routes added with pyramid.config.Configurator.


add_route() will have the specified path prepended to their pattern.

0.4. API Documentation 737


The Pyramid Web Framework, Version 1.9.4

If introspection is passed, it must be a boolean value. If it’s True, introspection values during
actions will be kept for use for tools like the debug toolbar. If it’s False, introspection values
provided by registrations will be ignored. By default, it is True.

New in version 1.1: The exceptionresponse_view argument.

New in version 1.2: The route_prefix argument.

New in version 1.3: The introspection argument.

New in version 1.6: The root_package argument. The response_factory argument.

New in version 1.9: The ability to use the configurator as a context manager with the with-statement
to make threadlocal configuration available for further configuration with an implicit commit.

Controlling Configuration State

commit()
Commit any pending configuration actions. If a configuration conflict is
detected in the pending configuration actions, this method will raise a
ConfigurationConflictError; within the traceback of this error will be
information about the source of the conflict, usually including file names and line
numbers of the cause of the configuration conflicts.

You should think very carefully before manually invoking commit().


Especially not as part of any reusable configuration methods. Normally it should
only be done by an application author at the end of configuration in order to
override certain aspects of an addon.

begin(request=<object object>)
Indicate that application or test configuration has begun. This pushes a dictionary
containing the application registry implied by registry attribute of this configu-
rator and the request implied by the request argument onto the thread local stack
consulted by various pyramid.threadlocal API functions.

If request is not specified and the registry owned by the configurator is already
pushed as the current threadlocal registry then this method will keep the current
threadlocal request unchanged.

Changed in version 1.8: The current threadlocal request is propagated if the current
threadlocal registry remains unchanged.

738 Contents
The Pyramid Web Framework, Version 1.9.4

end()
Indicate that application or test configuration has ended. This pops the last value
pushed onto the thread local stack (usually by the begin method) and returns that
value.

include(callable, route_prefix=None)
Include a configuration callable, to support imperative application extensibility.

In versions of Pyramid prior to 1.2, this function accepted *callables,


but this has been changed to support only a single callable.

A configuration callable should be a callable that accepts a single argument named


config, which will be an instance of a Configurator. However, be warned that
it will not be the same configurator instance on which you call this method. The
code which runs as a result of calling the callable should invoke methods on the
configurator passed to it which add configuration state. The return value of a callable
will be ignored.

Values allowed to be presented via the callable argument to this method: any
callable Python object or any dotted Python name which resolves to a callable
Python object. It may also be a Python module, in which case, the module will
be searched for a callable named includeme, which will be treated as the config-
uration callable.

For example, if the includeme function below lives in a module named myapp.
myconfig:

1 # myapp.myconfig module
2

3 def my_view(request):
4 from pyramid.response import Response
5 return Response('OK')
6

7 def includeme(config):
8 config.add_view(my_view)

You might cause it to be included within your Pyramid application like so:

0.4. API Documentation 739


The Pyramid Web Framework, Version 1.9.4

1 from pyramid.config import Configurator


2

3 def main(global_config, **settings):


4 config = Configurator()
5 config.include('myapp.myconfig.includeme')

Because the function is named includeme, the function name can also be omitted
from the dotted name reference:

1 from pyramid.config import Configurator


2

3 def main(global_config, **settings):


4 config = Configurator()
5 config.include('myapp.myconfig')

Included configuration statements will be overridden by local configuration state-


ments if an included callable causes a configuration conflict by registering something
with the same configuration parameters.
If the route_prefix is supplied, it must be a string. Any calls to pyramid.
config.Configurator.add_route() within the included callable will
have their pattern prefixed with the value of route_prefix. This can be used
to help mount a set of routes at a different location than the included callable’s au-
thor intended, while still maintaining the same route names. For example:

1 from pyramid.config import Configurator


2

3 def included(config):
4 config.add_route('show_users', '/show')
5

6 def main(global_config, **settings):


7 config = Configurator()
8 config.include(included, route_prefix='/users')

In the above configuration, the show_users route will have an effective route pat-
tern of /users/show, instead of /show because the route_prefix argument
will be prepended to the pattern.
New in version 1.2: The route_prefix parameter.
Changed in version 1.9: The included function is wrapped with a call
to pyramid.config.Configurator.begin() and pyramid.config.
Configurator.end() while it is executed.

740 Contents
The Pyramid Web Framework, Version 1.9.4

make_wsgi_app()
Commits any pending configuration statements, sends a pyramid.events.
ApplicationCreated event to all listeners, adds this configuration’s registry to
pyramid.config.global_registries, and returns a Pyramid WSGI ap-
plication representing the committed configuration state.

scan(package=None, categories=None, onerror=None, ignore=None, **kw)


Scan a Python package and any of its subpackages for objects marked with con-
figuration decoration such as pyramid.view.view_config. Any decorated
object found will influence the current configuration state.

The package argument should be a Python package or module object (or a dotted
Python name which refers to such a package or module). If package is None, the
package of the caller is used.

The categories argument, if provided, should be the Venusian ’scan categories’


to use during scanning. Providing this argument is not often necessary; specifying
scan categories is an extremely advanced usage. By default, categories is None
which will execute all Venusian decorator callbacks including Pyramid-related dec-
orators such as pyramid.view.view_config. See the Venusian documenta-
tion for more information about limiting a scan by using an explicit set of categories.

The onerror argument, if provided, should be a Venusian onerror callback


function. The onerror function is passed to venusian.Scanner.scan() to
influence error behavior when an exception is raised during the scanning process.
See the Venusian documentation for more information about onerror callbacks.

The ignore argument, if provided, should be a Venusian ignore value. Pro-


viding an ignore argument allows the scan to ignore particular modules, pack-
ages, or global objects during a scan. ignore can be a string or a callable, or
a list containing strings or callables. The simplest usage of ignore is to pro-
vide a module or package by providing a full path to its dotted name. For exam-
ple: config.scan(ignore='my.module.subpackage') would ignore
the my.module.subpackage package during a scan, which would prevent the
subpackage and any of its submodules from being imported and scanned. See the
Venusian documentation for more information about the ignore argument.

To perform a scan, Pyramid creates a Venusian Scanner object. The kw ar-


gument represents a set of keyword arguments to pass to the Venusian Scanner
object’s constructor. See the venusian documentation (its Scanner class) for more
information about the constructor. By default, the only keyword arguments passed
to the Scanner constructor are {'config':self} where self is this configu-
rator object. This services the requirement of all built-in Pyramid decorators, but

0.4. API Documentation 741


The Pyramid Web Framework, Version 1.9.4

extension systems may require additional arguments. Providing this argument is not
often necessary; it’s an advanced usage.

New in version 1.1: The **kw argument.

New in version 1.3: The ignore argument.

Adding Routes and Views

add_route(name, pattern=None, permission=None, factory=None, for_=None,


header=None, xhr=None, accept=None, path_info=None, re-
quest_method=None, request_param=None, traverse=None, cus-
tom_predicates=(), use_global_views=False, path=None, pregener-
ator=None, static=False, **predicates)
Add a route configuration to the current configuration state, as well as possibly a
view configuration to be used to specify a view callable that will be invoked when
this route matches. The arguments to this method are divided into predicate, non-
predicate, and view-related types. Route predicate arguments narrow the circum-
stances in which a route will be match a request; non-predicate arguments are infor-
mational.

Non-Predicate Arguments

name
The name of the route, e.g. myroute. This attribute is required. It must
be unique among all defined routes in a given application.
factory
A Python object (often a function or a class) or a dotted Python name which
refers to the same object that will generate a Pyramid root resource ob-
ject when this route matches. For example, mypackage.resources.
MyFactory. If this argument is not specified, a default root factory will
be used. See The Resource Tree for more information about root factories.
traverse
If you would like to cause the context to be something other than the root
object when this route matches, you can spell a traversal pattern as the
traverse argument. This traversal pattern will be used as the traver-
sal path: traversal will begin at the root object implied by this route (either
the global root, or the object returned by the factory associated with this
route).

The syntax of the traverse argument is the same as it is for


pattern. For example, if the pattern provided to add_route is
articles/{article}/edit, and the traverse argument provided
to add_route is /{article}, when a request comes in that causes the

742 Contents
The Pyramid Web Framework, Version 1.9.4

route to match in such a way that the article match value is '1' (when
the request URI is /articles/1/edit), the traversal path will be gen-
erated as /1. This means that the root object’s __getitem__ will be
called with the name '1' during the traversal phase. If the '1' object
exists, it will become the context of the request. Traversal has more infor-
mation about traversal.

If the traversal path contains segment marker names which are not present in
the pattern argument, a runtime error will occur. The traverse pat-
tern should not contain segment markers that do not exist in the pattern
argument.

A similar combining of routing and traversal is available when a route is


matched which contains a *traverse remainder marker in its pattern
(see Using *traverse in a Route Pattern). The traverse argument to
add_route allows you to associate route patterns with an arbitrary traversal
path without using a *traverse remainder marker; instead you can use
other match information.

Note that the traverse argument to add_route is ignored when at-


tached to a route that has a *traverse remainder marker in its pattern.
pregenerator
This option should be a callable object that implements the pyramid.
interfaces.IRoutePregenerator interface. A pregenerator is a
callable called by the pyramid.request.Request.route_url()
function to augment or replace the arguments it is passed when generating a
URL for the route. This is a feature not often used directly by applications,
it is meant to be hooked by frameworks that use Pyramid as a base.
use_global_views
When a request matches this route, and view lookup cannot find a view
which has a route_name predicate argument that matches the route, try
to fall back to using a view that otherwise matches the context, request, and
view name (but which does not match the route_name predicate).
static
If static is True, this route will never match an incoming request; it
will only be useful for URL generation. By default, static is False.
See Static Routes.

New in version 1.1.


accept
This value represents a match query for one or more mimetypes in the
Accept HTTP request header. If this value is specified, it must be in one of
the following forms: a mimetype match token in the form text/plain,

0.4. API Documentation 743


The Pyramid Web Framework, Version 1.9.4

a wildcard mimetype match token in the form text/* or a match-all wild-


card mimetype match token in the form */*. If any of the forms matches
the Accept header of the request, or if the Accept header isn’t set at all
in the request, this will match the current route. If this does not match the
Accept header of the request, route matching continues.
Predicate Arguments

pattern
The pattern of the route e.g. ideas/{idea}. This argument is required.
See Route Pattern Syntax for information about the syntax of route patterns.
If the pattern doesn’t match the current URL, route matching continues.

For backwards compatibility purposes (as of Pyramid 1.0), a path


keyword argument passed to this function will be used to represent the pat-
tern value if the pattern argument is None. If both path and pattern
are passed, pattern wins.

xhr
This value should be either True or False. If this value is specified and
is True, the request must possess an HTTP_X_REQUESTED_WITH (aka
X-Requested-With) header for this route to match. This is useful for
detecting AJAX requests issued from jQuery, Prototype and other Javascript
libraries. If this predicate returns False, route matching continues.
request_method
A string representing an HTTP method name, e.g. GET, POST, HEAD,
DELETE, PUT or a tuple of elements containing HTTP method names. If
this argument is not specified, this route will match if the request has any
request method. If this predicate returns False, route matching continues.

Changed in version 1.2: The ability to pass a tuple of items as


request_method. Previous versions allowed only a string.
path_info
This value represents a regular expression pattern that will be tested against
the PATH_INFO WSGI environment variable. If the regex matches, this
predicate will return True. If this predicate returns False, route matching
continues.
request_param
This value can be any string. A view declaration with this argument en-
sures that the associated route will only match when the request has a key in
the request.params dictionary (an HTTP GET or POST variable) that
has a name which matches the supplied value. If the value supplied as the
argument has a = sign in it, e.g. request_param="foo=123", then

744 Contents
The Pyramid Web Framework, Version 1.9.4

the key (foo) must both exist in the request.params dictionary, and
the value must match the right hand side of the expression (123) for the
route to ”match” the current request. If this predicate returns False, route
matching continues.
header
This argument represents an HTTP header name or a header name/value
pair. If the argument contains a : (colon), it will be con-
sidered a name/value pair (e.g. User-Agent:Mozilla/.* or
Host:localhost). If the value contains a colon, the value por-
tion should be a regular expression. If the value does not contain a
colon, the entire value will be considered to be the header name (e.g.
If-Modified-Since). If the value evaluates to a header name only
without a value, the header specified by the name must be present in the
request for this predicate to be true. If the value evaluates to a header
name/value pair, the header specified by the name must be present in the
request and the regular expression specified as the value must match the
header value. Whether or not the value represents a header name or a header
name/value pair, the case of the header name is not significant. If this pred-
icate returns False, route matching continues.
effective_principals
If specified, this value should be a principal identifier or a sequence
of principal identifiers. If the pyramid.request.Request.
effective_principals property indicates that every princi-
pal named in the argument list is present in the current request,
this predicate will return True; otherwise it will return False. For
example: effective_principals=pyramid.security.
Authenticated or effective_principals=('fred',
'group:admins').

New in version 1.4a4.


custom_predicates
Deprecated since version 1.5: This value should be a sequence of references
to custom predicate callables. Use custom predicates when no set of prede-
fined predicates does what you need. Custom predicates can be combined
with predefined predicates as necessary. Each custom predicate callable
should accept two arguments: info and request and should return ei-
ther True or False after doing arbitrary evaluation of the info and/or the
request. If all custom and non-custom predicate callables return True the
associated route will be considered viable for a given request. If any predi-
cate callable returns False, route matching continues. Note that the value
info passed to a custom route predicate is a dictionary containing match-
ing information; see Custom Route Predicates for more information about
info.
predicates

0.4. API Documentation 745


The Pyramid Web Framework, Version 1.9.4

Pass a key/value pair here to use a third-party predicate registered via


pyramid.config.Configurator.add_route_predicate().
More than one key/value pair can be used at the same time. See View and
Route Predicates for more information about third-party predicates.

New in version 1.4.


add_static_view(name, path, **kw)
Add a view used to render static assets such as images and CSS files.

The name argument is a string representing an application-relative local URL prefix.


It may alternately be a full URL.

The path argument is the path on disk where the static files reside. This can be an
absolute path, a package-relative path, or a asset specification.

The cache_max_age keyword argument is input to set the Expires and


Cache-Control headers for static assets served. Note that this argument has
no effect when the name is a url prefix. By default, this argument is None, meaning
that no particular Expires or Cache-Control headers are set in the response.

The permission keyword argument is used to specify the permission required by


a user to execute the static view. By default, it is the string pyramid.security.
NO_PERMISSION_REQUIRED, a special sentinel which indicates that, even if a
default permission exists for the current application, the static view should be ren-
derered to completely anonymous users. This default value is permissive because, in
most web apps, static assets seldom need protection from viewing. If permission
is specified, the security checking will be performed against the default root factory
ACL.

Any other keyword arguments sent to add_static_view are passed on to


pyramid.config.Configurator.add_route() (e.g. factory, per-
haps to define a custom factory with a custom ACL for this static view).

Usage

The add_static_view function is typically used in conjunction


with the pyramid.request.Request.static_url() method.
add_static_view adds a view which renders a static asset when some
URL is visited; pyramid.request.Request.static_url() generates a
URL to that asset.

The name argument to add_static_view is usually a simple URL prefix


(e.g. 'images'). When this is the case, the pyramid.request.Request.
static_url() API will generate a URL which points to a Pyramid view, which
will serve up a set of assets that live in the package itself. For example:

746 Contents
The Pyramid Web Framework, Version 1.9.4

add_static_view('images', 'mypackage:images/')

Code that registers such a view can generate URLs to the view via pyramid.
request.Request.static_url():

request.static_url('mypackage:images/logo.png')

When add_static_view is called with a name argument that represents a


URL prefix, as it is above, subsequent calls to pyramid.request.Request.
static_url() with paths that start with the path argument passed to
add_static_view will generate a URL something like http://<Pyramid
app URL>/images/logo.png, which will cause the logo.png file in the
images subdirectory of the mypackage package to be served.

add_static_view can alternately be used with a name argument which is a


URL, causing static assets to be served from an external webserver. This happens
when the name argument is a fully qualified URL (e.g. starts with http:// or
similar). In this mode, the name is used as the prefix of the full URL when gener-
ating a URL using pyramid.request.Request.static_url(). Further-
more, if a protocol-relative URL (e.g. //example.com/images) is used as the
name argument, the generated URL will use the protocol of the request (http or
https, respectively).

For example, if add_static_view is called like so:

add_static_view('http://example.com/images',
,→'mypackage:images/')

Subsequently, the URLs generated by pyramid.request.Request.


static_url() for that static view will be prefixed with http://example.
com/images (the external webserver listening on example.com must be itself
configured to respond properly to such a request.):

static_url('mypackage:images/logo.png', request)

See Serving Static Assets for more information.

0.4. API Documentation 747


The Pyramid Web Framework, Version 1.9.4

add_view(view=None, name=”, for_=None, permission=None, re-


quest_type=None, route_name=None, request_method=None, re-
quest_param=None, containment=None, attr=None, renderer=None,
wrapper=None, xhr=None, accept=None, header=None,
path_info=None, custom_predicates=(), context=None, decora-
tor=None, mapper=None, http_cache=None, match_param=None,
check_csrf=None, require_csrf=None, exception_only=False,
**view_options)
Add a view configuration to the current configuration state. Arguments to
add_view are broken down below into predicate arguments and non-predicate ar-
guments. Predicate arguments narrow the circumstances in which the view callable
will be invoked when a request is presented to Pyramid; non-predicate arguments
are informational.

Non-Predicate Arguments

view
A view callable or a dotted Python name which refers to a view callable.
This argument is required unless a renderer argument also exists. If a
renderer argument is passed, and a view argument is not provided, the
view callable defaults to a callable that returns an empty dictionary (see
Writing View Callables Which Use a Renderer).
permission
A permission that the user must possess in order to invoke the view callable.
See Configuring View Security for more information about view security
and permissions. This is often a string like view or edit.

If permission is omitted, a default permission may be used


for this view registration if one was named as the pyramid.
config.Configurator constructor’s default_permission
argument, or if pyramid.config.Configurator.
set_default_permission() was used prior to this
view registration. Pass the value pyramid.security.
NO_PERMISSION_REQUIRED as the permission argument to explicitly
indicate that the view should always be executable by entirely anonymous
users, regardless of the default permission, bypassing any authorization
policy that may be in effect.
attr
This knob is most useful when the view definition is a class.

The view machinery defaults to using the __call__ method of the view
callable (or the function itself, if the view callable is a function) to ob-
tain a response. The attr value allows you to vary the method attribute
used to obtain the response. For example, if your view was a class, and

748 Contents
The Pyramid Web Framework, Version 1.9.4

the class has a method named index and you wanted to use this method
instead of the class’ __call__ method to return the response, you’d say
attr="index" in the view configuration for the view.
renderer
This is either a single string term (e.g. json) or a string implying a path
or asset specification (e.g. templates/views.pt) naming a renderer
implementation. If the renderer value does not contain a dot ., the spec-
ified string will be used to look up a renderer implementation, and that ren-
derer implementation will be used to construct a response from the view
return value. If the renderer value contains a dot (.), the specified term
will be treated as a path, and the filename extension of the last element in
the path will be used to look up the renderer implementation, which will be
passed the full path. The renderer implementation will be used to construct
a response from the view return value.

Note that if the view itself returns a response (see View Callable Responses),
the specified renderer implementation is never called.

When the renderer is a path, although a path is usually just a simple rel-
ative pathname (e.g. templates/foo.pt, implying that a template
named ”foo.pt” is in the ”templates” directory relative to the directory of
the current package of the Configurator), a path can be absolute, start-
ing with a slash on UNIX or a drive letter prefix on Windows. The
path can alternately be a asset specification in the form some.dotted.
package_name:relative/path, making it possible to address tem-
plate assets which live in a separate package.

The renderer attribute is optional. If it is not defined, the ”null” renderer


is assumed (no rendering is performed and the value is passed back to the
upstream Pyramid machinery unmodified).
http_cache
New in version 1.1.

When you supply an http_cache value to a view configuration, the


Expires and Cache-Control headers of a response generated by the
associated view callable are modified. The value for http_cache may be
one of the following:
• A nonzero integer. If it’s a nonzero integer, it’s treated as a number of
seconds. This number of seconds will be used to compute the Expires
header and the Cache-Control: max-age parameter of responses
to requests which call this view. For example: http_cache=3600 in-
structs the requesting browser to ’cache this response for an hour, please’.

0.4. API Documentation 749


The Pyramid Web Framework, Version 1.9.4

• A datetime.timedelta instance. If it’s a datetime.


timedelta instance, it will be converted into a number of seconds, and
that number of seconds will be used to compute the Expires header and
the Cache-Control: max-age parameter of responses to requests
which call this view. For example: http_cache=datetime.
timedelta(days=1) instructs the requesting browser to ’cache this
response for a day, please’.
• Zero (0). If the value is zero, the Cache-Control and Expires
headers present in all responses from this view will be composed such
that client browser cache (and any intermediate caches) are instructed to
never cache the response.
• A two-tuple. If it’s a two tuple (e.g. http_cache=(1,
{'public':True})), the first value in the tuple may be a nonzero
integer or a datetime.timedelta instance; in either case this value
will be used as the number of seconds to cache the response. The second
value in the tuple must be a dictionary. The values present in the dic-
tionary will be used as input to the Cache-Control response header.
For example: http_cache=(3600, {'public':True}) means
’cache for an hour, and add public to the Cache-Control header
of the response’. All keys and values supported by the webob.
cachecontrol.CacheControl interface may be added to the
dictionary. Supplying {'public':True} is equivalent to calling
response.cache_control.public = True.
Providing a non-tuple value as http_cache is equivalent to calling
response.cache_expires(value) within your view’s body.

Providing a two-tuple value as http_cache is equivalent to calling


response.cache_expires(value[0], **value[1]) within
your view’s body.

If you wish to avoid influencing, the Expires header, and instead wish to
only influence Cache-Control headers, pass a tuple as http_cache
with the first element of None, e.g.: (None, {'public':True}).

If you wish to prevent a view that uses http_cache in its configura-


tion from having its caching response headers changed by this machin-
ery, set response.cache_control.prevent_auto = True be-
fore returning the response from the view. This effectively disables any
HTTP caching done by http_cache for that response.
require_csrf
New in version 1.7.

A boolean option or None. Default: None.

750 Contents
The Pyramid Web Framework, Version 1.9.4

If this option is set to True then CSRF checks will be enabled for requests
to this view. The required token or header default to csrf_token and
X-CSRF-Token, respectively.

CSRF checks only affect ”unsafe” methods as defined by RFC2616. By


default, these methods are anything except GET, HEAD, OPTIONS, and
TRACE.

The defaults here may be overridden by pyramid.config.


Configurator.set_default_csrf_options().

This feature requires a configured session factory.

If this option is set to False then CSRF checks will be dis-


abled regardless of the default require_csrf setting passed to
set_default_csrf_options.

See Checking CSRF Tokens Automatically for more information.


wrapper
The view name of a different view configuration which will receive the re-
sponse body of this view as the request.wrapped_body attribute of
its own request, and the response returned by this view as the request.
wrapped_response attribute of its own request. Using a wrapper
makes it possible to ”chain” views together to form a composite re-
sponse. The response of the outermost wrapper view will be returned
to the user. The wrapper view will be found as any view is found:
see View Configuration. The ”best” wrapper view will be found based
on the lookup ordering: ”under the hood” this wrapper view is looked
up via pyramid.view.render_view_to_response(context,
request, 'wrapper_viewname'). The context and request of a
wrapper view is the same context and request of the inner view. If this
attribute is unspecified, no view wrapping is done.
decorator
A dotted Python name to function (or the function itself, or an iterable
of the aforementioned) which will be used to decorate the registered view
callable. The decorator function(s) will be called with the view callable as
a single argument. The view callable it is passed will accept (context,
request). The decorator(s) must return a replacement view callable
which also accepts (context, request).

If decorator is an iterable, the callables will be combined and used in the


order provided as a decorator. For example:

0.4. API Documentation 751


The Pyramid Web Framework, Version 1.9.4

@view_config(...,
decorator=(decorator2,
decorator1))
def myview(request):
....

Is similar to doing:

@view_config(...)
@decorator2
@decorator1
def myview(request):
...

Except with the existing benefits of decorator= (having a common dec-


orator syntax for all view calling conventions and not having to think about
preserving function attributes such as __name__ and __module__
within decorator logic).

An important distinction is that each decorator will receive a response object


implementing pyramid.interfaces.IResponse instead of the raw
value returned from the view callable. All decorators in the chain must
return a response object or raise an exception:

def log_timer(wrapped):
def wrapper(context, request):
start = time.time()
response = wrapped(context, request)
duration = time.time() - start
response.headers['X-View-Time'] = '%.3f
,→' % (duration,)

log.info('view took %.3f seconds',␣


,→duration)

return response
return wrapper

Changed in version 1.4a4: Passing an iterable.


mapper

752 Contents
The Pyramid Web Framework, Version 1.9.4

A Python object or dotted Python name which refers to a view mapper,


or None. By default it is None, which indicates that the view should use
the default view mapper. This plug-point is useful for Pyramid extension
developers, but it’s not very useful for ’civilians’ who are just developing
stock Pyramid applications. Pay no attention to the man behind the curtain.
accept
This value represents a match query for one or more mimetypes in the
Accept HTTP request header. If this value is specified, it must be in one of
the following forms: a mimetype match token in the form text/plain,
a wildcard mimetype match token in the form text/* or a match-all wild-
card mimetype match token in the form */*. If any of the forms matches
the Accept header of the request, or if the Accept header isn’t set at all
in the request, this will match the current view. If this does not match the
Accept header of the request, view matching continues.
Predicate Arguments

name
The view name. Read Traversal to understand the concept of a view name.
context
An object or a dotted Python name referring to an interface or class object
that the context must be an instance of, or the interface that the context
must provide in order for this view to be found and called. This predicate is
true when the context is an instance of the represented class or if the con-
text provides the represented interface; it is otherwise false. This argument
may also be provided to add_view as for_ (an older, still-supported
spelling). If the view should only match when handling exceptions, then set
the exception_only to True.
exception_only
New in version 1.8.

When this value is True, the context argument must be a subclass of


Exception. This flag indicates that only an exception view should be
created, and that this view should not match if the traversal context matches
the context argument. If the context is a subclass of Exception and
this value is False (the default), then a view will be registered to match
the traversal context as well.
route_name
This value must match the name of a route configuration declaration (see
URL Dispatch) that must match before this view will be called.
request_type
This value should be an interface that the request must provide in order
for this view to be found and called. This value exists only for backwards
compatibility purposes.
request_method

0.4. API Documentation 753


The Pyramid Web Framework, Version 1.9.4

This value can be either a string (such as "GET", "POST", "PUT",


"DELETE", "HEAD" or "OPTIONS") representing an HTTP
REQUEST_METHOD, or a tuple containing one or more of these
strings. A view declaration with this argument ensures that the view
will only be called when the method attribute of the request (aka the
REQUEST_METHOD of the WSGI environment) matches a supplied value.
Note that use of GET also implies that the view will respond to HEAD as of
Pyramid 1.4.

Changed in version 1.2: The ability to pass a tuple of items as


request_method. Previous versions allowed only a string.
request_param
This value can be any string or any sequence of strings. A view declaration
with this argument ensures that the view will only be called when the request
has a key in the request.params dictionary (an HTTP GET or POST
variable) that has a name which matches the supplied value (if the value is
a string) or values (if the value is a tuple). If any value supplied has a = sign
in it, e.g. request_param="foo=123", then the key (foo) must both
exist in the request.params dictionary, and the value must match the
right hand side of the expression (123) for the view to ”match” the current
request.
match_param
New in version 1.2.

This value can be a string of the format ”key=value” or a tuple containing


one or more of these strings.

A view declaration with this argument ensures that the view will only be
called when the request has key/value pairs in its matchdict that equal those
supplied in the predicate. e.g. match_param="action=edit" would
require the action parameter in the matchdict match the right hand side
of the expression (edit) for the view to ”match” the current request.

If the match_param is a tuple, every key/value pair must match for the
predicate to pass.
containment
This value should be a Python class or interface (or a dotted Python name)
that an object in the lineage of the context must provide in order for this view
to be found and called. The nodes in your object graph must be ”location-
aware” to use this feature. See Location-Aware Resources for more infor-
mation about location-awareness.
xhr

754 Contents
The Pyramid Web Framework, Version 1.9.4

This value should be either True or False. If this value is specified and
is True, the request must possess an HTTP_X_REQUESTED_WITH (aka
X-Requested-With) header that has the value XMLHttpRequest for
this view to be found and called. This is useful for detecting AJAX requests
issued from jQuery, Prototype and other Javascript libraries.
header
This value represents an HTTP header name or a header name/value pair.
If the value contains a : (colon), it will be considered a name/value pair
(e.g. User-Agent:Mozilla/.* or Host:localhost). The value
portion should be a regular expression. If the value does not contain a
colon, the entire value will be considered to be the header name (e.g.
If-Modified-Since). If the value evaluates to a header name only
without a value, the header specified by the name must be present in the
request for this predicate to be true. If the value evaluates to a header
name/value pair, the header specified by the name must be present in the
request and the regular expression specified as the value must match the
header value. Whether or not the value represents a header name or a header
name/value pair, the case of the header name is not significant.
path_info
This value represents a regular expression pattern that will be tested against
the PATH_INFO WSGI environment variable. If the regex matches, this
predicate will be True.
check_csrf
Deprecated since version 1.7: Use the require_csrf option or
see Checking CSRF Tokens Automatically instead to have pyramid.
exceptions.BadCSRFToken exceptions raised.

If specified, this value should be one of None, True, False, or a string


representing the ’check name’. If the value is True or a string, CSRF check-
ing will be performed. If the value is False or None, CSRF checking will
not be performed.

If the value provided is a string, that string will be used as the ’check name’.
If the value provided is True, csrf_token will be used as the check
name.

If CSRF checking is performed, the checked value will be the


value of request.params[check_name]. This value will
be compared against the value of policy.get_csrf_token()
(where policy is an implementation of pyramid.interfaces.
ICSRFStoragePolicy()), and the check will pass if these two values
are the same. If the check passes, the associated view will be permitted
to execute. If the check fails, the associated view will not be permitted to
execute.

0.4. API Documentation 755


The Pyramid Web Framework, Version 1.9.4

New in version 1.4a2.


Changed in version 1.9: This feature requires either a session factory to have
been configured, or a CSRF storage policy other than the default to be in
use.
physical_path
If specified, this value should be a string or a tuple representing the phys-
ical path of the context found via traversal for this predicate to match as
true. For example: physical_path='/' or physical_path='/
a/b/c' or physical_path=('', 'a', 'b', 'c'). This is not
a path prefix match or a regex, it’s a whole-path match. It’s useful when
you want to always potentially show a view when some object is traversed
to, but you can’t be sure about what kind of object it will be, so you can’t
use the context predicate. The individual path elements inbetween slash
characters or in tuple elements should be the Unicode representation of the
name of the resource and should not be encoded in any way.
New in version 1.4a3.
effective_principals
If specified, this value should be a principal identifier or a sequence
of principal identifiers. If the pyramid.request.Request.
effective_principals property indicates that every princi-
pal named in the argument list is present in the current request,
this predicate will return True; otherwise it will return False. For
example: effective_principals=pyramid.security.
Authenticated or effective_principals=('fred',
'group:admins').
New in version 1.4a4.
custom_predicates
Deprecated since version 1.5: This value should be a sequence of references
to custom predicate callables. Use custom predicates when no set of pre-
defined predicates do what you need. Custom predicates can be combined
with predefined predicates as necessary. Each custom predicate callable
should accept two arguments: context and request and should re-
turn either True or False after doing arbitrary evaluation of the con-
text and/or the request. The predicates argument to this method and
the ability to register third-party view predicates via pyramid.config.
Configurator.add_view_predicate() obsoletes this argument,
but it is kept around for backwards compatibility.
view_options
Pass a key/value pair here to use a third-party predicate or
set a value for a view deriver. See pyramid.config.
Configurator.add_view_predicate() and pyramid.
config.Configurator.add_view_deriver(). See View and

756 Contents
The Pyramid Web Framework, Version 1.9.4

Route Predicates for more information about third-party predicates and


View Derivers for information about view derivers.

add_notfound_view(view=None, attr=None, renderer=None, wrap-


per=None, route_name=None, request_type=None,
request_method=None, request_param=None, contain-
ment=None, xhr=None, accept=None, header=None,
path_info=None, custom_predicates=(), decora-
tor=None, mapper=None, match_param=None,
append_slash=False, **view_options)
Add a default Not Found View to the current configuration state. The
view will be called when Pyramid or application code raises an pyramid.
httpexceptions.HTTPNotFound exception (e.g., when a view cannot be
found for the request). The simplest example is:

def notfound(request):
return Response('Not Found', status='404␣
,→Not Found')

config.add_notfound_view(notfound)

If view argument is not provided, the view callable defaults to


default_exceptionresponse_view().

All arguments except append_slash have the same meaning as pyramid.


config.Configurator.add_view() and each predicate argument restricts
the set of circumstances under which this notfound view will be invoked. Unlike
pyramid.config.Configurator.add_view(), this method will raise an
exception if passed name, permission, require_csrf, context, for_, or
exception_only keyword arguments. These argument values make no sense in
the context of a Not Found View.

If append_slash is True, when this Not Found View is invoked, and the current
path info does not end in a slash, the notfound logic will attempt to find a route that
matches the request’s path info suffixed with a slash. If such a route exists, Pyramid
will issue a redirect to the URL implied by the route; if it does not, Pyramid will
return the result of the view callable provided as view, as normal.

If the argument provided as append_slash is not a boolean but in-


stead implements IResponse, the append_slash logic will behave as if
append_slash=True was passed, but the provided class will be used as the re-
sponse class instead of the default HTTPFound response class when a redirect is
performed. For example:

0.4. API Documentation 757


The Pyramid Web Framework, Version 1.9.4

from pyramid.httpexceptions import␣


,→HTTPMovedPermanently

config.add_notfound_view(append_
,→slash=HTTPMovedPermanently)

The above means that a redirect to a slash-appended route will be attempted,


but instead of HTTPFound being used, HTTPMovedPermanently will be
used for the redirect response if a slash-appended route is found.

New in version 1.3.

Changed in version 1.6: The append_slash argument was modified to allow any
object that implements the IResponse interface to specify the response class used
when a redirect is performed.

Changed in version 1.8: The view is created using exception_only=True.

add_forbidden_view(view=None, attr=None, renderer=None,


wrapper=None, route_name=None, re-
quest_type=None, request_method=None, re-
quest_param=None, containment=None, xhr=None,
accept=None, header=None, path_info=None, cus-
tom_predicates=(), decorator=None, mapper=None,
match_param=None, **view_options)
Add a forbidden view to the current configuration state. The view will be
called when Pyramid or application code raises a pyramid.httpexceptions.
HTTPForbidden exception and the set of circumstances implied by the predicates
provided are matched. The simplest example is:

def forbidden(request):
return Response('Forbidden', status='403␣
,→Forbidden')

config.add_forbidden_view(forbidden)

If view argument is not provided, the view callable defaults to


default_exceptionresponse_view().

All arguments have the same meaning as pyramid.config.Configurator.


add_view() and each predicate argument restricts the set of circumstances
under which this forbidden view will be invoked. Unlike pyramid.
config.Configurator.add_view(), this method will raise an excep-
tion if passed name, permission, require_csrf, context, for_, or

758 Contents
The Pyramid Web Framework, Version 1.9.4

exception_only keyword arguments. These argument values make no sense


in the context of a forbidden exception view.

New in version 1.3.

Changed in version 1.8: The view is created using exception_only=True.

add_exception_view(view=None, context=None, **view_options)


Add an exception view for the specified exception to the current configuration
state. The view will be called when Pyramid or application code raises the given
exception.

This method accepts almost all of the same arguments as pyramid.config.


Configurator.add_view() except for name, permission, for_,
require_csrf, and exception_only.

By default, this method will set context=Exception, thus registering for most
default Python exceptions. Any subclass of Exception may be specified.

New in version 1.8.

Adding an Event Subscriber

add_subscriber(subscriber, iface=None, **predicates)


Add an event subscriber for the event stream implied by the supplied iface inter-
face.

The subscriber argument represents a callable object (or a dotted Python name
which identifies a callable); it will be called with a single object event whenever
Pyramid emits an event associated with the iface, which may be an interface or a
class or a dotted Python name to a global object representing an interface or a class.

Using the default iface value, None will cause the subscriber to be registered for
all event types. See Using Events for more information about events and subscribers.

Any number of predicate keyword arguments may be passed in **predicates.


Each predicate named will narrow the set of circumstances in which the subscriber
will be invoked. Each named predicate must have been registered via pyramid.
config.Configurator.add_subscriber_predicate() before it can
be used. See Subscriber Predicates for more information.

New in version 1.4: The **predicates argument.

0.4. API Documentation 759


The Pyramid Web Framework, Version 1.9.4

Using Security

set_authentication_policy(policy)
Override the Pyramid authentication policy in the current configuration.
The policy argument must be an instance of an authentication policy or
a dotted Python name that points at an instance of an authentication policy.

Using the authentication_policy argument to the


pyramid.config.Configurator constructor can be used to
achieve the same purpose.

set_authorization_policy(policy)
Override the Pyramid authorization policy in the current configuration.
The policy argument must be an instance of an authorization policy or
a dotted Python name that points at an instance of an authorization policy.

Using the authorization_policy argument to the pyramid.


config.Configurator constructor can be used to achieve the same
purpose.

set_default_csrf_options(require_csrf=True, to-
ken=’csrf_token’,
header=’X-CSRF-Token’,
safe_methods=(’GET’, ’HEAD’,
’OPTIONS’, ’TRACE’), call-
back=None)
Set the default CSRF options used by subsequent view registrations.

require_csrf controls whether CSRF checks will be automatically


enabled on each view in the application. This value is used as the fall-
back when require_csrf is left at the default of None on pyramid.
config.Configurator.add_view().

token is the name of the CSRF token used in the body of the request,
accessed via request.POST[token]. Default: csrf_token.

header is the name of the header containing the CSRF token, accessed
via request.headers[header]. Default: X-CSRF-Token.

760 Contents
The Pyramid Web Framework, Version 1.9.4

If token or header are set to None they will not be used for checking
CSRF tokens.

safe_methods is an iterable of HTTP methods which are expected to


not contain side-effects as defined by RFC2616. Safe methods will never be
automatically checked for CSRF tokens. Default: ('GET', 'HEAD',
'OPTIONS', TRACE').

If callback is set, it must be a callable accepting (request) and re-


turning True if the request should be checked for a valid CSRF token. This
callback allows an application to support alternate authentication methods
that do not rely on cookies which are not subject to CSRF attacks. For
example, if a request is authenticated using the Authorization header
instead of a cookie, this may return False for that request so that clients do
not need to send the X-CSRF-Token header. The callback is only tested
for non-safe methods as defined by safe_methods.

New in version 1.7.

Changed in version 1.8: Added the callback option.

set_csrf_storage_policy(policy)
Set the CSRF storage policy used by subsequent view registrations.

policy is a class that implements the pyramid.interfaces.


ICSRFStoragePolicy() interface and defines how to generate and
persist CSRF tokens.

set_default_permission(permission)
Set the default permission to be used by all subsequent view configuration
registrations. permission should be a permission string to be used as the
default permission. An example of a permission string:'view'. Adding a
default permission makes it unnecessary to protect each view configuration
with an explicit permission, unless your application policy requires some
exception for a particular view.

If a default permission is not set, views represented by view configuration


registrations which do not explicitly declare a permission will be executable
by entirely anonymous users (any authorization policy is ignored).

Later calls to this method override will conflict with earlier calls; there can
be only one default permission active at a time within an application.

0.4. API Documentation 761


The Pyramid Web Framework, Version 1.9.4

If a default permission is in effect, view configurations


meant to create a truly anonymously accessible view (even excep-
tion view views) must use the value of the permission importable as
pyramid.security.NO_PERMISSION_REQUIRED. When this
string is used as the permission for a view configuration, the default
permission is ignored, and the view is registered, making it available to
all callers regardless of their credentials.

See also:

See also Setting a Default Permission.

Using the default_permission argument to the pyramid.


config.Configurator constructor can be used to achieve the same
purpose.

add_permission(permission_name)
A configurator directive which registers a free-standing permission without
associating it with a view callable. This can be used so that the permission
shows up in the introspectable data under the permissions category
(permissions mentioned via add_view already end up in there). For ex-
ample:

config = Configurator()
config.add_permission('view')

Extending the Request Object

add_request_method(callable=None, name=None, prop-


erty=False, reify=False)
Add a property or method to the request object.

When adding a method to the request, callable may be any function that
receives the request object as the first parameter. If name is None then it
will be computed from the name of the callable.

When adding a property to the request, callable can either be a callable


that accepts the request as its single positional parameter, or it can be a

762 Contents
The Pyramid Web Framework, Version 1.9.4

property descriptor. If name is None, the name of the property will be


computed from the name of the callable.

If the callable is a property descriptor a ValueError will be raised


if name is None or reify is True.

See pyramid.request.Request.set_property() for more de-


tails on property vs reify. When reify is True, the value of
property is assumed to also be True.

In all cases, callable may also be a dotted Python name which refers to
either a callable or a property descriptor.

If callable is None then the method is only used to assist in conflict


detection between different addons requesting the same attribute on the re-
quest object.

This is the recommended method for extending the request


object and should be used in favor of providing a custom
request factory via pyramid.config.Configurator.
set_request_factory().

New in version 1.4.

set_request_property(callable, name=None, reify=False)


Add a property to the request object.

Deprecated since version 1.5: pyramid.config.Configurator.


add_request_method() should be used instead. (This method was
docs-deprecated in 1.4 and issues a real deprecation warning in 1.5).

New in version 1.3.

Using I18N

add_translation_dirs(*specs, **kw)
Add one or more translation directory paths to the current configuration
state. The specs argument is a sequence that may contain absolute di-
rectory paths (e.g. /usr/share/locale) or asset specification names
naming a directory path (e.g. some.package:locale) or a combina-
tion of the two.

Example:

0.4. API Documentation 763


The Pyramid Web Framework, Version 1.9.4

config.add_translation_dirs('/usr/share/locale
,→',

'some.
,→package:locale')

The translation directories are defined as a list in which translations defined


later have precedence over translations defined earlier.

By default, consecutive calls to add_translation_dirs will add


directories to the start of the list. This means later calls to
add_translation_dirs will have their translations trumped by ear-
lier calls. If you explicitly need this call to trump an earlier call then you
may set override to True.

If multiple specs are provided in a single call to


add_translation_dirs, the directories will be inserted in the
order they’re provided (earlier items are trumped by later items).

Changed in version 1.8: The override parameter was added to allow a


later call to add_translation_dirs to override an earlier call, insert-
ing folders at the beginning of the translation directory list.

set_locale_negotiator(negotiator)
Set the locale negotiator for this application. The locale negotiator is a
callable which accepts a request object and which returns a locale name.
The negotiator argument should be the locale negotiator implementa-
tion or a dotted Python name which refers to such an implementation.

Later calls to this method override earlier calls; there can be only one locale
negotiator active at a time within an application. See Activating Translation
for more information.

Using the locale_negotiator argument to the pyramid.


config.Configurator constructor can be used to achieve the same
purpose.

Overriding Assets

764 Contents
The Pyramid Web Framework, Version 1.9.4

override_asset(to_override, override_with, _override=None)


Add a Pyramid asset override to the current configuration state.

to_override is an asset specification to the asset being overridden.

override_with is an asset specification to the asset that is performing


the override. This may also be an absolute path.

See Static Assets for more information about asset overrides.

Getting and Adding Settings

add_settings(settings=None, **kw)
Augment the deployment settings with one or more key/value pairs.

You may pass a dictionary:

config.add_settings({'external_uri':'http://
,→example.com'})

Or a set of key/value pairs:

config.add_settings(external_uri='http://
,→example.com')

This function is useful when you need to test code that accesses
the pyramid.registry.Registry.settings API (or the
pyramid.config.Configurator.get_settings() API) and
which uses values from that API.

get_settings()
Return a deployment settings object for the current application. A de-
ployment settings object is a dictionary-like object that contains key/value
pairs based on the dictionary passed as the settings argument to the
pyramid.config.Configurator constructor.

the pyramid.registry.Registry.settings API performs


the same duty.

0.4. API Documentation 765


The Pyramid Web Framework, Version 1.9.4

Hooking Pyramid Behavior

add_renderer(name, factory)
Add a Pyramid renderer factory to the current configuration state.

The name argument is the renderer name. Use None to represent the de-
fault renderer (a renderer which will be used for all views unless they name
another renderer specifically).

The factory argument is Python reference to an implementation of a


renderer factory or a dotted Python name to same.

add_resource_url_adapter(adapter, resource_iface=None)
New in version 1.3.

When you add a traverser as described in Changing the Traverser, it’s


convenient to continue to use the pyramid.request.Request.
resource_url() API. However, since the way traversal is done may
have been modified, the URLs that resource_url generates by default
may be incorrect when resources are returned by a custom traverser.

If you’ve added a traverser, you can change how resource_url() gen-


erates a URL for a specific type of resource by calling this method.

The adapter argument represents a class that implements the


IResourceURL interface. The class constructor should accept two ar-
guments in its constructor (the resource and the request) and the re-
sulting instance should provide the attributes detailed in that interface
(virtual_path and physical_path, in particular).

The resource_iface argument represents a class or interface that


the resource should possess for this url adapter to be used when
pyramid.request.Request.resource_url() looks up a re-
source url adapter. If resource_iface is not passed, or it is passed
as None, the url adapter will be used for every type of resource.

See Changing How pyramid.request.Request.resource_url() Generates a


URL for more information.

766 Contents
The Pyramid Web Framework, Version 1.9.4

add_response_adapter(adapter, type_or_iface)
When an object of type (or interface) type_or_iface is returned from
a view callable, Pyramid will use the adapter adapter to convert it into
an object which implements the pyramid.interfaces.IResponse
interface. If adapter is None, an object returned of type (or interface)
type_or_iface will itself be used as a response object.

adapter and type_or_interface may be Python objects or strings


representing dotted names to importable Python global objects.

See Changing How Pyramid Treats View Responses for more information.

add_traverser(adapter, iface=None)
The superdefault traversal algorithm that Pyramid uses is explained in The
Traversal Algorithm. Though it is rarely necessary, this default algorithm
can be swapped out selectively for a different traversal pattern via configu-
ration. The section entitled Changing the Traverser details how to create a
traverser class.

For example, to override the superdefault traverser used by Pyramid, you


might do something like this:

from myapp.traversal import MyCustomTraverser


config.add_traverser(MyCustomTraverser)

This would cause the Pyramid superdefault traverser to never be used; in-
stead all traversal would be done using your MyCustomTraverser class,
no matter which object was returned by the root factory of this applica-
tion. Note that we passed no arguments to the iface keyword parameter.
The default value of iface, None represents that the registered traverser
should be used when no other more specific traverser is available for the
object returned by the root factory.

However, more than one traversal algorithm can be active at the same time.
The traverser used can depend on the result of the root factory. For instance,
if your root factory returns more than one type of object conditionally, you
could claim that an alternate traverser adapter should be used against one
particular class or interface returned by that root factory. When the root
factory returned an object that implemented that class or interface, a custom
traverser would be used. Otherwise, the default traverser would be used.
The iface argument represents the class of the object that the root factory
might return or an interface that the object might implement.

To use a particular traverser only when the root factory returns a particular
class:

0.4. API Documentation 767


The Pyramid Web Framework, Version 1.9.4

config.add_traverser(MyCustomTraverser,␣
,→MyRootClass)

When more than one traverser is active, the ”most specific” traverser will
be used (the one that matches the class or interface of the value returned by
the root factory most closely).

Note that either adapter or iface can be a dotted Python name or a


Python object.

See Changing the Traverser for more information.

add_tween(tween_factory, under=None, over=None)


New in version 1.2.

Add a ’tween factory’. A tween (a contraction of ’between’) is a bit of code


that sits between the Pyramid router’s main request handling function and
the upstream WSGI component that uses Pyramid as its ’app’. Tweens are
a feature that may be used by Pyramid framework extensions, to provide,
for example, Pyramid-specific view timing support, bookkeeping code that
examines exceptions before they are returned to the upstream WSGI ap-
plication, or a variety of other features. Tweens behave a bit like WSGI
’middleware’ but they have the benefit of running in a context in which
they have access to the Pyramid application registry as well as the Pyramid
rendering machinery.

You can view the tween ordering configured into a given Pyramid
application by using the ptweens command. See Displaying ”Tweens”.

The tween_factory argument must be a dotted Python name to a global


object representing the tween factory.

The under and over arguments allow the caller of add_tween to pro-
vide a hint about where in the tween chain this tween factory should be
placed when an implicit tween chain is used. These hints are only used
when an explicit tween chain is not used (when the pyramid.tweens
configuration value is not set). Allowable values for under or over (or
both) are:
• None (the default).

768 Contents
The Pyramid Web Framework, Version 1.9.4

• A dotted Python name to a tween factory: a string representing the dotted


name of a tween factory added in a call to add_tween in the same
configuration session.
• One of the constants pyramid.tweens.MAIN, pyramid.
tweens.INGRESS, or pyramid.tweens.EXCVIEW .
• An iterable of any combination of the above. This allows the user to spec-
ify fallbacks if the desired tween is not included, as well as compatibility
with multiple other tweens.
under means ’closer to the main Pyramid application than’, over means
’closer to the request ingress than’.

For example, calling add_tween('myapp.tfactory',


over=pyramid.tweens.MAIN) will attempt to place the tween
factory represented by the dotted name myapp.tfactory directly
’above’ (in ptweens order) the main Pyramid request handler. Likewise,
calling add_tween('myapp.tfactory', over=pyramid.
tweens.MAIN, under='mypkg.someothertween') will
attempt to place this tween factory ’above’ the main handler but ’below’
(a fictional) ’mypkg.someothertween’ tween factory.

If all options for under (or over) cannot be found in the current
configuration, it is an error. If some options are specified purely
for compatibilty with other tweens, just add a fallback of MAIN
or INGRESS. For example, under=('mypkg.someothertween',
'mypkg.someothertween2', INGRESS). This constraint will re-
quire the tween to be located under both the ’mypkg.someothertween’
tween, the ’mypkg.someothertween2’ tween, and INGRESS. If any of these
is not in the current configuration, this constraint will only organize itself
based on the tweens that are present.

Specifying neither over nor under is equivalent to specifying


under=INGRESS.

Implicit tween ordering is obviously only best-effort. Pyramid will attempt


to present an implicit order of tweens as best it can, but the only surefire way
to get any particular ordering is to use an explicit tween order. A user may
always override the implicit tween ordering by using an explicit pyramid.
tweens configuration value setting.

under, and over arguments are ignored when an explicit tween chain is
specified using the pyramid.tweens configuration value.

For more information, see Registering Tweens.

0.4. API Documentation 769


The Pyramid Web Framework, Version 1.9.4

add_route_predicate(name, factory, weighs_more_than=None,


weighs_less_than=None)
Adds a route predicate factory. The view predicate can later be named
as a keyword argument to pyramid.config.Configurator.
add_route().
name should be the name of the predicate. It must be a valid Python iden-
tifier (it will be used as a keyword argument to add_route).
factory should be a predicate factory or dotted Python name which
refers to a predicate factory.
See View and Route Predicates for more information.
New in version 1.4.
add_subscriber_predicate(name, factory,
weighs_more_than=None,
weighs_less_than=None)
New in version 1.4.
Adds a subscriber predicate factory. The associated subscriber predicate
can later be named as a keyword argument to pyramid.config.
Configurator.add_subscriber() in the **predicates
anonymous keyword argument dictionary.
name should be the name of the predicate. It must be a valid Python
identifier (it will be used as a **predicates keyword argument to
add_subscriber()).
factory should be a predicate factory or dotted Python name which
refers to a predicate factory.
See Subscriber Predicates for more information.
add_view_predicate(name, factory, weighs_more_than=None,
weighs_less_than=None)
New in version 1.4.
Adds a view predicate factory. The associated view predicate can
later be named as a keyword argument to pyramid.config.
Configurator.add_view() in the predicates anonyous key-
word argument dictionary.
name should be the name of the predicate. It must be a valid Python iden-
tifier (it will be used as a keyword argument to add_view by others).
factory should be a predicate factory or dotted Python name which
refers to a predicate factory.
See View and Route Predicates for more information.

770 Contents
The Pyramid Web Framework, Version 1.9.4

add_view_deriver(deriver, name=None, under=None, over=None)


New in version 1.7.

Add a view deriver to the view pipeline. View derivers are a feature used
by extension authors to wrap views in custom code controllable by view-
specific options.

deriver should be a callable conforming to the pyramid.


interfaces.IViewDeriver interface.

name should be the name of the view deriver. There are no restrictions on
the name of a view deriver. If left unspecified, the name will be constructed
from the name of the deriver.

The under and over options can be used to control the ordering of view
derivers by providing hints about where in the view pipeline the deriver is
used. Each option may be a string or a list of strings. At least one view
deriver in each, the over and under directions, must exist to fully satisfy the
constraints.

under means closer to the user-defined view callable, and over means
closer to view pipeline ingress.

The default value for over is rendered_view and under is


decorated_view. This places the deriver somewhere between the
two in the view pipeline. If the deriver should be placed else-
where in the pipeline, such as above decorated_view, then you
MUST also specify under to something earlier in the order, or a
CyclicDependencyError will be raised when trying to sort the de-
rivers.

See View Derivers for more information.

set_execution_policy(policy)
Override the Pyramid execution policy in the current configuration. The
policy argument must be an instance of an pyramid.interfaces.
IExecutionPolicy or a dotted Python name that points at an instance
of an execution policy.

0.4. API Documentation 771


The Pyramid Web Framework, Version 1.9.4

set_request_factory(factory)
The object passed as factory should be an object (or a dotted Python
name which refers to an object) which will be used by the Pyramid router to
create all request objects. This factory object must have the same methods
and attributes as the pyramid.request.Request class (particularly
__call__, and blank).

See pyramid.config.Configurator.
add_request_method() for a less intrusive way to extend the
request objects with custom methods and properties.

Using the request_factory argument to the pyramid.


config.Configurator constructor can be used to achieve the same
purpose.

set_root_factory(factory)
Add a root factory to the current configuration state. If the factory ar-
gument is None a default root factory will be registered.

Using the root_factory argument to the pyramid.config.


Configurator constructor can be used to achieve the same purpose.

set_session_factory(factory)
Configure the application with a session factory. If this method is called,
the factory argument must be a session factory callable or a dotted
Python name to that factory.

Using the session_factory argument to the pyramid.


config.Configurator constructor can be used to achieve the same
purpose.

set_view_mapper(mapper)
Setting a view mapper makes it possible to make use of view callable ob-
jects which implement different call signatures than the ones supported by
Pyramid as described in its narrative documentation.

772 Contents
The Pyramid Web Framework, Version 1.9.4

The mapper argument should be an object implementing pyramid.


interfaces.IViewMapperFactory or a dotted Python name to
such an object. The provided mapper will become the default view map-
per to be used by all subsequent view configuration registrations.

See also:

See also Using a View Mapper.

Using the default_view_mapper argument to the pyramid.


config.Configurator constructor can be used to achieve the same
purpose.

Extension Author APIs

action(discriminator, callable=None, args=(), kw=None, order=0, in-


trospectables=(), **extra)
Register an action which will be executed when pyramid.config.
Configurator.commit() is called (or executed immediately if
autocommit is True).

This method is typically only used by Pyramid framework exten-


sion authors, not by Pyramid application developers.

The discriminator uniquely identifies the action. It must be given,


but it can be None, to indicate that the action never conflicts. It must be a
hashable value.

The callable is a callable object which performs the task associated


with the action when the action is executed. It is optional.

args and kw are tuple and dict objects respectively, which are passed to
callable when this action is executed. Both are optional.

order is a grouping mechanism; an action with a lower order will be exe-


cuted before an action with a higher order (has no effect when autocommit
is True).

0.4. API Documentation 773


The Pyramid Web Framework, Version 1.9.4

introspectables is a sequence of introspectable objects (or the empty


sequence if no introspectable objects are associated with this action). If this
configurator’s introspection attribute is False, these introspecta-
bles will be ignored.

extra provides a facility for inserting extra keys and values into an action
dictionary.

add_directive(name, directive, action_wrap=True)


Add a directive method to the configurator.

This method is typically only used by Pyramid framework exten-


sion authors, not by Pyramid application developers.

Framework extenders can add directive methods to a con-


figurator by instructing their users to call config.
add_directive('somename', 'some.callable'). This
will make some.callable accessible as config.somename.
some.callable should be a function which accepts config as a
first argument, and arbitrary positional and keyword arguments following.
It should use config.action as necessary to perform actions. Directive
methods can then be invoked like ’built-in’ directives such as add_view,
add_route, etc.

The action_wrap argument should be True for directives which


perform config.action with potentially conflicting discriminators.
action_wrap will cause the directive to be wrapped in a decorator which
provides more accurate conflict cause information.

add_directive does not participate in conflict detection, and later calls


to add_directive will override earlier calls.

with_package(package)
Return a new Configurator instance with the same registry as this configura-
tor. package may be an actual Python package object or a dotted Python
name representing a package.

derive_view(view, attr=None, renderer=None)


Create a view callable using the function, instance, or class (or dotted
Python name referring to the same) provided as view object.

774 Contents
The Pyramid Web Framework, Version 1.9.4

This method is typically only used by Pyramid framework exten-


sion authors, not by Pyramid application developers.

This is API is useful to framework extenders who create pluggable systems


which need to register ’proxy’ view callables for functions, instances, or
classes which meet the requirements of being a Pyramid view callable. For
example, a some_other_framework function in another framework
may want to allow a user to supply a view callable, but he may want to wrap
the view callable in his own before registering the wrapper as a Pyramid
view callable. Because a Pyramid view callable can be any of a number of
valid objects, the framework extender will not know how to call the user-
supplied object. Running it through derive_view normalizes it to a
callable which accepts two arguments: context and request.

For example:

def some_other_framework(user_supplied_view):
config = Configurator(reg)
proxy_view = config.derive_view(user_
,→supplied_view)

def my_wrapper(context, request):


do_something_that_mutates(request)
return proxy_view(context, request)
config.add_view(my_wrapper)

The view object provided should be one of the following:


• A function or another non-class callable object that accepts a request as
a single positional argument and which returns a response object.
• A function or other non-class callable object that accepts two positional
arguments, context, request and which returns a response object.
• A class which accepts a single positional argument in its constructor
named request, and which has a __call__ method that accepts no
arguments that returns a response object.
• A class which accepts two positional arguments named context,
request, and which has a __call__ method that accepts no argu-
ments that returns a response object.
• A dotted Python name which refers to any of the kinds of objects above.
This API returns a callable which accepts the arguments context,
request and which returns the result of calling the provided view ob-
ject.

0.4. API Documentation 775


The Pyramid Web Framework, Version 1.9.4

The attr keyword argument is most useful when the view object is a class.
It names the method that should be used as the callable. If attr is not
provided, the attribute effectively defaults to __call__. See Defining a
View Callable as a Class for more information.

The renderer keyword argument should be a renderer name. If supplied,


it will cause the returned callable to use a renderer to convert the user-
supplied view result to a response object. If a renderer argument is not
supplied, the user-supplied view must itself return a response object.

Utility Methods

absolute_asset_spec(relative_spec)
Resolve the potentially relative asset specification string passed as
relative_spec into an absolute asset specification string and return
the string. Use the package of this configurator as the package to which
the asset specification will be considered relative when generating an ab-
solute asset specification. If the provided relative_spec argument is
already absolute, or if the relative_spec is not a string, it is simply
returned.

maybe_dotted(dotted)
Resolve the dotted Python name dotted to a global Python object. If
dotted is not a string, return it without attempting to do any name res-
olution. If dotted is a relative dotted name (e.g. .foo.bar, consider
it relative to the package argument supplied to this Configurator’s con-
structor.

ZCA-Related APIs

hook_zca()
Call zope.component.getSiteManager.sethook() with the
argument pyramid.threadlocal.get_current_registry,
causing the Zope Component Architecture ’global’ APIs such as
zope.component.getSiteManager(), zope.component.
getAdapter() and others to use the Pyramid application registry
rather than the Zope ’global’ registry.

unhook_zca()
Call zope.component.getSiteManager.reset() to undo the
action of pyramid.config.Configurator.hook_zca().

776 Contents
The Pyramid Web Framework, Version 1.9.4

setup_registry(settings=None, root_factory=None, au-


thentication_policy=None, authoriza-
tion_policy=None, renderers=None, de-
bug_logger=None, locale_negotiator=None,
request_factory=None, response_factory=None,
default_permission=None, session_factory=None,
default_view_mapper=None, excep-
tionresponse_view=<function de-
fault_exceptionresponse_view>)
When you pass a non-None registry argument to the Configurator
constructor, no initial setup is performed against the registry. This is be-
cause the registry you pass in may have already been initialized for use
under Pyramid via a different configurator. However, in some circum-
stances (such as when you want to use a global registry instead of a reg-
istry created as a result of the Configurator constructor), or when you want
to reset the initial setup of a registry, you do want to explicitly initialize
the registry associated with a Configurator for use under Pyramid. Use
setup_registry to do this initialization.

setup_registry configures settings, a root factory, security policies,


renderers, a debug logger, a locale negotiator, and various other settings
using the configurator’s current registry, as per the descriptions in the Con-
figurator constructor.

Testing Helper APIs

testing_add_renderer(path, renderer=None)
Unit/integration testing helper: register a renderer at path (usually a
relative filename ala templates/foo.pt or an asset specification)
and return the renderer object. If the renderer argument is None,
a ’dummy’ renderer will be used. This function is useful when test-
ing code that calls the pyramid.renderers.render() function or
pyramid.renderers.render_to_response() function or any
other render_* or get_* API of the pyramid.renderers module.

Note that calling this method for with a path argument representing a ren-
derer factory type (e.g. for foo.pt usually implies the chameleon_zpt
renderer factory) clobbers any existing renderer factory registered for that
type.

This method is also available under the alias


testing_add_template (an older name for it).

0.4. API Documentation 777


The Pyramid Web Framework, Version 1.9.4

testing_add_subscriber(event_iface=None)
Unit/integration testing helper: Registers a subscriber which listens for
events of the type event_iface. This method returns a list object which
is appended to by the subscriber whenever an event is captured.

When an event is dispatched that matches the value implied by the


event_iface argument, that event will be appended to the list.
You can then compare the values in the list to expected event no-
tifications. This method is useful when testing code that wants
to call pyramid.registry.Registry.notify(), or zope.
component.event.dispatch().

The default value of event_iface (None) implies a subscriber regis-


tered for any kind of event.

testing_resources(resources)
Unit/integration testing helper: registers a dictionary of resource
objects that can be resolved via the pyramid.traversal.
find_resource() API.

The pyramid.traversal.find_resource() API is called with a


path as one of its arguments. If the dictionary you register when calling
this method contains that path as a string key (e.g. /foo/bar or foo/
bar), the corresponding value will be returned to find_resource (and
thus to your code) when pyramid.traversal.find_resource()
is called with an equivalent path string or tuple.

testing_securitypolicy(userid=None, groupids=(), permis-


sive=True, remember_result=None,
forget_result=None)
Unit/integration testing helper: Registers a pair of faux Pyramid security
policies: a authentication policy and a authorization policy.

The behavior of the registered authorization policy depends on the


permissive argument. If permissive is true, a permissive autho-
rization policy is registered; this policy allows all access. If permissive
is false, a nonpermissive authorization policy is registered; this policy de-
nies all access.

remember_result, if provided, should be the result returned by the


remember method of the faux authentication policy. If it is not provided
(or it is provided, and is None), the default value [] (the empty list) will
be returned by remember.

778 Contents
The Pyramid Web Framework, Version 1.9.4

forget_result, if provided, should be the result returned by the


forget method of the faux authentication policy. If it is not provided
(or it is provided, and is None), the default value [] (the empty list) will
be returned by forget.

The behavior of the registered authentication policy depends on the


values provided for the userid and groupids argument. The authen-
tication policy will return the userid identifier implied by the userid
argument and the group ids implied by the groupids argument when
the pyramid.request.Request.authenticated_userid or
pyramid.request.Request.effective_principals APIs
are used.

This function is most useful when testing code that uses the APIs named
pyramid.request.Request.has_permission(), pyramid.
request.Request.authenticated_userid, pyramid.
request.Request.effective_principals, and pyramid.
security.principals_allowed_by_permission().

New in version 1.4: The remember_result argument.

New in version 1.4: The forget_result argument.

Attributes

introspectable
A shortcut attribute which points to the pyramid.registry.
Introspectable class (used during directives to provide introspection
to actions).

New in version 1.3.

introspector
The introspector related to this configuration. It is an instance implement-
ing the pyramid.interfaces.IIntrospector interface.

New in version 1.3.

registry
The application registry which holds the configuration associated with this
configurator.

0.4. API Documentation 779


The Pyramid Web Framework, Version 1.9.4

global_registries
The set of registries that have been created for Pyramid applications, one for each call to pyramid.
config.Configurator.make_wsgi_app() in the current process. The object itself sup-
ports iteration and has a last property containing the last registry loaded.

The registries contained in this object are stored as weakrefs, thus they will only exist for the lifetime
of the actual applications for which they are being used.

class not_(value)
You can invert the meaning of any predicate value by wrapping it in a call to pyramid.config.
not_.

1 from pyramid.config import not_


2

3 config.add_view(
4 'mypackage.views.my_view',
5 route_name='ok',
6 request_method=not_('POST')
7 )

The above example will ensure that the view is called if the request method is not POST, at least if
no other view is more specific.

This technique of wrapping a predicate value in not_ can be used anywhere predicate values are
accepted:

• pyramid.config.Configurator.add_view()

• pyramid.config.Configurator.add_route()

• pyramid.config.Configurator.add_subscriber()

• pyramid.view.view_config()

• pyramid.events.subscriber()

New in version 1.5.

PHASE0_CONFIG

PHASE1_CONFIG

PHASE2_CONFIG

PHASE3_CONFIG

780 Contents
The Pyramid Web Framework, Version 1.9.4

pyramid.csrf

class LegacySessionCSRFStoragePolicy
A CSRF storage policy that defers control of CSRF storage to the session.

This policy maintains compatibility with legacy ISession implementations that know how
to manage CSRF tokens themselves via ISession.new_csrf_token and ISession.
get_csrf_token.

Note that using this CSRF implementation requires that a session factory is configured.

New in version 1.9.

check_csrf_token(request, supplied_token)
Returns True if the supplied_token is valid.

get_csrf_token(request)
Returns the currently active CSRF token from the session, generating a new one if needed.

new_csrf_token(request)
Sets a new CSRF token into the session and returns it.

class SessionCSRFStoragePolicy(key=’_csrft_’)
A CSRF storage policy that persists the CSRF token in the session.

Note that using this CSRF implementation requires that a session factory is configured.

key

The session key where the CSRF token will be stored. Default: _csrft_.

New in version 1.9.

check_csrf_token(request, supplied_token)
Returns True if the supplied_token is valid.

get_csrf_token(request)
Returns the currently active CSRF token from the session, generating a new one if needed.

new_csrf_token(request)
Sets a new CSRF token into the session and returns it.

0.4. API Documentation 781


The Pyramid Web Framework, Version 1.9.4

class CookieCSRFStoragePolicy(cookie_name=’csrf_token’, secure=False,


httponly=False, domain=None, max_age=None,
path=’/’)
An alternative CSRF implementation that stores its information in unauthenticated cookies, known
as the ’Double Submit Cookie’ method in the OWASP CSRF guidelines. This gives some additional
flexibility with regards to scaling as the tokens can be generated and verified by a front-end server.
New in version 1.9.
check_csrf_token(request, supplied_token)
Returns True if the supplied_token is valid.
get_csrf_token(request)
Returns the currently active CSRF token by checking the cookies sent with the current request.
new_csrf_token(request)
Sets a new CSRF token into the request and returns it.
get_csrf_token(request)
Get the currently active CSRF token for the request passed, generating a new one using
new_csrf_token(request) if one does not exist. This calls the equivalent method in the
chosen CSRF protection implementation.
New in version 1.9.
new_csrf_token(request)
Generate a new CSRF token for the request passed and persist it in an implementation defined man-
ner. This calls the equivalent method in the chosen CSRF protection implementation.
New in version 1.9.
check_csrf_origin(request, trusted_origins=None, raises=True)
Check the Origin of the request to see if it is a cross site request or not.
If the value supplied by the Origin or Referer header isn’t one of the trusted origins and
raises is True, this function will raise a pyramid.exceptions.BadCSRFOrigin excep-
tion, but if raises is False, this function will return False instead. If the CSRF origin checks
are successful this function will return True unconditionally.
Additional trusted origins may be added by passing a list of domain (and ports if non-standard
like ['example.com', 'dev.example.com:8080']) in with the trusted_origins
parameter. If trusted_origins is None (the default) this list of additional domains will be
pulled from the pyramid.csrf_trusted_origins setting.
Note that this function will do nothing if request.scheme is not https.
New in version 1.7.
Changed in version 1.9: Moved from pyramid.session to pyramid.csrf

782 Contents
The Pyramid Web Framework, Version 1.9.4

check_csrf_token(request, token=’csrf_token’, header=’X-CSRF-Token’, raises=True)


Check the CSRF token returned by the pyramid.interfaces.ICSRFStoragePolicy
implementation against the value in request.POST.get(token) (if a POST request) or
request.headers.get(header). If a token keyword is not supplied to this function, the
string csrf_token will be used to look up the token in request.POST. If a header keyword
is not supplied to this function, the string X-CSRF-Token will be used to look up the token in
request.headers.

If the value supplied by post or by header cannot be verified by the pyramid.interfaces.


ICSRFStoragePolicy, and raises is True, this function will raise an pyramid.
exceptions.BadCSRFToken exception. If the values differ and raises is False, this func-
tion will return False. If the CSRF check is successful, this function will return True uncondi-
tionally.

See Checking CSRF Tokens Automatically for information about how to secure your application
automatically against CSRF attacks.

New in version 1.4a2.

Changed in version 1.7a1: A CSRF token passed in the query string of the request is no longer
considered valid. It must be passed in either the request body or a header.

Changed in version 1.9: Moved from pyramid.session to pyramid.csrf and updated to use
the configured pyramid.interfaces.ICSRFStoragePolicy to verify the CSRF token.

pyramid.decorator

reify(wrapped)
Use as a class method decorator. It operates almost exactly like the Python @property decorator,
but it puts the result of the method it decorates into the instance dict after the first call, effectively
replacing the function it decorates with an instance variable. It is, in Python parlance, a non-data
descriptor. The following is an example and its usage:

>>> from pyramid.decorator import reify

>>> class Foo(object):


... @reify
... def jammy(self):
... print('jammy called')
... return 1

(continues on next page)

0.4. API Documentation 783


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


>>> f = Foo()
>>> v = f.jammy
jammy called
>>> print(v)
1
>>> f.jammy
1
>>> # jammy func not called the second time; it replaced itself␣
,→with 1

>>> # Note: reassignment is possible


>>> f.jammy = 2
>>> f.jammy
2

pyramid.events

Functions

subscriber(*ifaces, **predicates)
Decorator activated via a scan which treats the function being decorated as an event subscriber for
the set of interfaces passed as *ifaces and the set of predicate terms passed as **predicates
to the decorator constructor.

For example:

from pyramid.events import NewRequest


from pyramid.events import subscriber

@subscriber(NewRequest)
def mysubscriber(event):
event.request.foo = 1

More than one event type can be passed as a constructor argument. The decorated subscriber will
be called for each event type.

784 Contents
The Pyramid Web Framework, Version 1.9.4

from pyramid.events import NewRequest, NewResponse


from pyramid.events import subscriber

@subscriber(NewRequest, NewResponse)
def mysubscriber(event):
print(event)

When the subscriber decorator is used without passing an arguments, the function it decorates
is called for every event sent:

from pyramid.events import subscriber

@subscriber()
def mysubscriber(event):
print(event)

This method will have no effect until a scan is performed against the package or module which
contains it, ala:

from pyramid.config import Configurator


config = Configurator()
config.scan('somepackage_containing_subscribers')

Any **predicate arguments will be passed along to pyramid.config.Configurator.


add_subscriber(). See Subscriber Predicates for a description of how predicates can narrow
the set of circumstances in which a subscriber will be called.

Two additional keyword arguments which will be passed to the venusian attach function are
_depth and _category.

_depth is provided for people who wish to reuse this class from another decorator. The default
value is 0 and should be specified relative to the subscriber invocation. It will be passed in to the
venusian attach function as the depth of the callstack when Venusian checks if the decorator is
being used in a class or module context. It’s not often used, but it can be useful in this circumstance.

_category sets the decorator category name. It can be useful in combination with the category
argument of scan to control which views should be processed.

See the venusian.attach() function in Venusian for more information about the _depth and
_category arguments.

Changed in version 1.9.1: Added the _depth and _category arguments.

0.4. API Documentation 785


The Pyramid Web Framework, Version 1.9.4

Event Types

class ApplicationCreated(app)
An instance of this class is emitted as an event when the pyramid.config.Configurator.
make_wsgi_app() is called. The instance has an attribute, app, which is an instance of the
router that will handle WSGI requests. This class implements the pyramid.interfaces.
IApplicationCreated interface.

For backwards compatibility purposes, this class can also be imported as pyramid.
events.WSGIApplicationCreatedEvent. This was the name of the event class before
Pyramid 1.0.

class NewRequest(request)
An instance of this class is emitted as an event whenever Pyramid begins to process a new request.
The event instance has an attribute, request, which is a request object. This event class imple-
ments the pyramid.interfaces.INewRequest interface.

class ContextFound(request)
An instance of this class is emitted as an event after the Pyramid router finds a context object (after it
performs traversal) but before any view code is executed. The instance has an attribute, request,
which is the request object generated by Pyramid.

Notably, the request object will have an attribute named context, which is the context that will be
provided to the view which will eventually be called, as well as other attributes attached by context-
finding code.

This class implements the pyramid.interfaces.IContextFound interface.

As of Pyramid 1.0, for backwards compatibility purposes, this event may also be imported as
pyramid.events.AfterTraversal.

class BeforeTraversal(request)
An instance of this class is emitted as an event after the Pyramid router has attempted to find a route
object but before any traversal or view code is executed. The instance has an attribute, request,
which is the request object generated by Pyramid.

Notably, the request object may have an attribute named matched_route, which is the matched
route if found. If no route matched, this attribute is not available.

This class implements the pyramid.interfaces.IBeforeTraversal interface.

786 Contents
The Pyramid Web Framework, Version 1.9.4

class NewResponse(request, response)


An instance of this class is emitted as an event whenever any Pyramid view or exception view returns
a response.

The instance has two attributes:request, which is the request which caused the response, and
response, which is the response object returned by a view or renderer.

If the response was generated by an exception view, the request will have an attribute named
exception, which is the exception object which caused the exception view to be executed. If the
response was generated by a ’normal’ view, this attribute of the request will be None.

This event will not be generated if a response cannot be created due to an exception that is not caught
by an exception view (no response is created under this circumstace).

This class implements the pyramid.interfaces.INewResponse interface.

Postprocessing a response is usually better handled in a WSGI middleware component than


in subscriber code that is called by a pyramid.interfaces.INewResponse event. The
pyramid.interfaces.INewResponse event exists almost purely for symmetry with the
pyramid.interfaces.INewRequest event.

class BeforeRender(system, rendering_val=None)


Subscribers to this event may introspect and modify the set of renderer globals before they are passed
to a renderer. This event object iself has a dictionary-like interface that can be used for this purpose.
For example:

from pyramid.events import subscriber


from pyramid.events import BeforeRender

@subscriber(BeforeRender)
def add_global(event):
event['mykey'] = 'foo'

An object of this type is sent as an event just before a renderer is invoked.

If a subscriber adds a key via __setitem__ that already exists in the renderer globals dictio-
nary, it will overwrite the older value there. This can be problematic because event subscribers to
the BeforeRender event do not possess any relative ordering. For maximum interoperability with
other third-party subscribers, if you write an event subscriber meant to be used as a BeforeRender
subscriber, your subscriber code will need to ensure no value already exists in the renderer globals

0.4. API Documentation 787


The Pyramid Web Framework, Version 1.9.4

dictionary before setting an overriding value (which can be done using .get or __contains__
of the event object).

The dictionary returned from the view is accessible through the rendering_val attribute of a
BeforeRender event.

Suppose you return {'mykey': 'somevalue', 'mykey2': 'somevalue2'} from


your view callable, like so:

from pyramid.view import view_config

@view_config(renderer='some_renderer')
def myview(request):
return {'mykey': 'somevalue', 'mykey2': 'somevalue2'}

rendering_val can be used to access these values from the BeforeRender object:

from pyramid.events import subscriber


from pyramid.events import BeforeRender

@subscriber(BeforeRender)
def read_return(event):
# {'mykey': 'somevalue'} is returned from the view
print(event.rendering_val['mykey'])

In other words, rendering_val is the (non-system) value returned by a view or passed to


render* as value. This feature is new in Pyramid 1.2.

For a description of the values present in the renderer globals dictionary, see System Values Used
During Rendering.

See also:

See also pyramid.interfaces.IBeforeRender.

update(E, **F)
Update D from dict/iterable E and F. If E has a .keys() method, does: for k in E: D[k] = E[k] If
E lacks .keys() method, does: for (k, v) in E: D[k] = v. In either case, this is followed by: for
k in F: D[k] = F[k].

clear() → None. Remove all items from D.

788 Contents
The Pyramid Web Framework, Version 1.9.4

copy() → a shallow copy of D

fromkeys()
Create a new dictionary with keys from iterable and values set to value.

get()
Return the value for key if key is in the dictionary, else default.

items() → a set-like object providing a view on D’s items

keys() → a set-like object providing a view on D’s keys

pop(k [, d ]) → v, remove specified key and return the corresponding value.


If key is not found, d is returned if given, otherwise KeyError is raised

popitem() → (k, v), remove and return some (key, value) pair as a
2-tuple; but raise KeyError if D is empty.

setdefault()
Insert key with a value of default if key is not in the dictionary.

Return the value for key if key is in the dictionary, else default.

values() → an object providing a view on D’s values

See Using Events for more information about how to register code which subscribes to these events.

pyramid.exceptions

exception BadCSRFOrigin(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)
This exception indicates the request has failed cross-site request forgery origin validation.

exception BadCSRFToken(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)
This exception indicates the request has failed cross-site request forgery token validation.

0.4. API Documentation 789


The Pyramid Web Framework, Version 1.9.4

exception PredicateMismatch(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)
This exception is raised by multiviews when no view matches all given predicates.

This exception subclasses the HTTPNotFound exception for a specific reason: if it reaches the main
exception handler, it should be treated as HTTPNotFound` by any exception view registrations.
Thus, typically, this exception will not be seen publicly.

However, this exception will be raised if the predicates of all views configured to handle an-
other exception context cannot be successfully matched. For instance, if a view is configured
to handle a context of HTTPForbidden and the configured with additional predicates, then
PredicateMismatch will be raised if:

• An original view callable has raised HTTPForbidden (thus invoking an exception view);
and

• The given request fails to match all predicates for said exception view associated with
HTTPForbidden.

The same applies to any type of exception being handled by an exception view.

Forbidden
alias of pyramid.httpexceptions.HTTPForbidden

NotFound
alias of pyramid.httpexceptions.HTTPNotFound

exception ConfigurationError
Raised when inappropriate input values are supplied to an API method of a Configurator

exception URLDecodeError
This exception is raised when Pyramid cannot successfully decode a URL or a URL path segment.
This exception behaves just like the Python builtin UnicodeDecodeError. It is a subclass of
the builtin UnicodeDecodeError exception only for identity purposes, mostly so an exception
view can be registered when a URL cannot be decoded.

790 Contents
The Pyramid Web Framework, Version 1.9.4

pyramid.httpexceptions

HTTP Exceptions

This module contains Pyramid HTTP exception classes. Each class relates to a single HTTP status code.
Each class is a subclass of the HTTPException. Each exception class is also a response object.

Each exception class has a status code according to RFC 2068: codes with 100-300 are not really errors;
400s are client errors, and 500s are server errors.

Exception

HTTPException

HTTPSuccessful

• 200 - HTTPOk

• 201 - HTTPCreated

• 202 - HTTPAccepted

• 203 - HTTPNonAuthoritativeInformation

• 204 - HTTPNoContent

• 205 - HTTPResetContent

• 206 - HTTPPartialContent

HTTPRedirection

• 300 - HTTPMultipleChoices

• 301 - HTTPMovedPermanently

• 302 - HTTPFound

• 303 - HTTPSeeOther

• 304 - HTTPNotModified

0.4. API Documentation 791


The Pyramid Web Framework, Version 1.9.4

• 305 - HTTPUseProxy

• 307 - HTTPTemporaryRedirect

HTTPError

HTTPClientError

• 400 - HTTPBadRequest

• 401 - HTTPUnauthorized

• 402 - HTTPPaymentRequired

• 403 - HTTPForbidden

• 404 - HTTPNotFound

• 405 - HTTPMethodNotAllowed

• 406 - HTTPNotAcceptable

• 407 - HTTPProxyAuthenticationRequired

• 408 - HTTPRequestTimeout

• 409 - HTTPConflict

• 410 - HTTPGone

• 411 - HTTPLengthRequired

• 412 - HTTPPreconditionFailed

• 413 - HTTPRequestEntityTooLarge

• 414 - HTTPRequestURITooLong

• 415 - HTTPUnsupportedMediaType

• 416 - HTTPRequestRangeNotSatisfiable

• 417 - HTTPExpectationFailed

792 Contents
The Pyramid Web Framework, Version 1.9.4

• 422 - HTTPUnprocessableEntity

• 423 - HTTPLocked

• 424 - HTTPFailedDependency

• 428 - HTTPPreconditionRequired

• 429 - HTTPTooManyRequests

• 431 - HTTPRequestHeaderFieldsTooLarge

HTTPServerError

• 500 - HTTPInternalServerError

• 501 - HTTPNotImplemented

• 502 - HTTPBadGateway

• 503 - HTTPServiceUnavailable

• 504 - HTTPGatewayTimeout

• 505 - HTTPVersionNotSupported

• 507 - HTTPInsufficientStorage

HTTP exceptions are also response objects, thus they accept most of the same parameters that can be
passed to a regular Response. Each HTTP exception also has the following attributes:

code the HTTP status code for the exception

title remainder of the status line (stuff after the code)

explanation a plain-text explanation of the error message that is not subject to environ-
ment or header substitutions; it is accessible in the template via ${explanation}

detail a plain-text message customization that is not subject to environment or header sub-
stitutions; accessible in the template via ${detail}

0.4. API Documentation 793


The Pyramid Web Framework, Version 1.9.4

body_template a String.template-format content fragment used for environment


and header substitution; the default template includes both the explanation and further
detail provided in the message.

Each HTTP exception accepts the following parameters, any others will be forwarded to its Response
superclass:

detail a plain-text override of the default detail

headers a list of (k,v) header pairs, or a dict, to be added to the response; use the con-
tent_type=’application/json’ kwarg and other similar kwargs to to change properties of
the response supported by the pyramid.response.Response superclass

comment a plain-text additional information which is usually stripped/hidden for end-users

body_template a string.Template object containing a content fragment in HTML


that frames the explanation and further detail

body a string that will override the body_template and be used as the body of the re-
sponse.

Substitution of response headers into template values is always performed. Substitution of WSGI environ-
ment values is performed if a request is passed to the exception’s constructor.

The subclasses of _HTTPMove (HTTPMultipleChoices, HTTPMovedPermanently,


HTTPFound, HTTPSeeOther, HTTPUseProxy and HTTPTemporaryRedirect) are redi-
rections that require a Location field. Reflecting this, these subclasses have one additional keyword
argument: location, which indicates the location to which to redirect.

status_map
A mapping of integer status code to HTTP exception class (eg. the integer ”401” maps to
pyramid.httpexceptions.HTTPUnauthorized). All mapped exception classes are chil-
dren of pyramid.httpexceptions,

exception_response(status_code, **kw)
Creates an HTTP exception based on a status code. Example:

raise exception_response(404) # raises an HTTPNotFound␣


,→exception.

The values passed as kw are provided to the exception’s constructor.

794 Contents
The Pyramid Web Framework, Version 1.9.4

exception HTTPException(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)

exception HTTPOk(detail=None, headers=None, comment=None, body_template=None,


json_formatter=None, **kw)
subclass of HTTPSuccessful

Indicates that the request has succeeded.

code: 200, title: OK

exception HTTPRedirection(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)
base class for exceptions with status codes in the 300s (redirections)

This is an abstract base class for 3xx redirection. It indicates that further action needs to be taken
by the user agent in order to fulfill the request. It does not necessarly signal an error condition.

exception HTTPError(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)
base class for exceptions with status codes in the 400s and 500s

This is an exception which indicates that an error has occurred, and that any work in progress should
not be committed.

exception HTTPClientError(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)
base class for the 400s, where the client is in error

This is an error condition in which the client is presumed to be in-error. This is an expected problem,
and thus is not considered a bug. A server-side traceback is not warranted. Unless specialized, this
is a ’400 Bad Request’

exception HTTPServerError(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)
base class for the 500s, where the server is in-error

This is an error condition in which the server is presumed to be in-error. Unless specialized, this is
a ’500 Internal Server Error’.

exception HTTPCreated(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)
subclass of HTTPSuccessful

This indicates that request has been fulfilled and resulted in a new resource being created.

code: 201, title: Created

0.4. API Documentation 795


The Pyramid Web Framework, Version 1.9.4

exception HTTPAccepted(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)
subclass of HTTPSuccessful

This indicates that the request has been accepted for processing, but the processing has not been
completed.

code: 202, title: Accepted

exception HTTPNonAuthoritativeInformation(detail=None, headers=None, com-


ment=None, body_template=None,
json_formatter=None, **kw)
subclass of HTTPSuccessful

This indicates that the returned metainformation in the entity-header is not the definitive set as avail-
able from the origin server, but is gathered from a local or a third-party copy.

code: 203, title: Non-Authoritative Information

exception HTTPNoContent(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)
subclass of HTTPSuccessful

This indicates that the server has fulfilled the request but does not need to return an entity-body, and
might want to return updated metainformation.

code: 204, title: No Content

exception HTTPResetContent(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)
subclass of HTTPSuccessful

This indicates that the server has fulfilled the request and the user agent SHOULD reset the document
view which caused the request to be sent.

code: 205, title: Reset Content

exception HTTPPartialContent(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)
subclass of HTTPSuccessful

This indicates that the server has fulfilled the partial GET request for the resource.

code: 206, title: Partial Content

796 Contents
The Pyramid Web Framework, Version 1.9.4

exception HTTPMultipleChoices(location=”, detail=None, headers=None, com-


ment=None, body_template=None, **kw)
subclass of _HTTPMove

This indicates that the requested resource corresponds to any one of a set of representations, each
with its own specific location, and agent-driven negotiation information is being provided so that the
user can select a preferred representation and redirect its request to that location.

code: 300, title: Multiple Choices

exception HTTPMovedPermanently(location=”, detail=None, headers=None, com-


ment=None, body_template=None, **kw)
subclass of _HTTPMove

This indicates that the requested resource has been assigned a new permanent URI and any future
references to this resource SHOULD use one of the returned URIs.

code: 301, title: Moved Permanently

exception HTTPFound(location=”, detail=None, headers=None, comment=None,


body_template=None, **kw)
subclass of _HTTPMove

This indicates that the requested resource resides temporarily under a different URI.

code: 302, title: Found

exception HTTPSeeOther(location=”, detail=None, headers=None, comment=None,


body_template=None, **kw)
subclass of _HTTPMove

This indicates that the response to the request can be found under a different URI and SHOULD be
retrieved using a GET method on that resource.

code: 303, title: See Other

exception HTTPNotModified(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)
subclass of HTTPRedirection

This indicates that if the client has performed a conditional GET request and access is allowed, but
the document has not been modified, the server SHOULD respond with this status code.

code: 304, title: Not Modified

0.4. API Documentation 797


The Pyramid Web Framework, Version 1.9.4

exception HTTPUseProxy(location=”, detail=None, headers=None, comment=None,


body_template=None, **kw)
subclass of _HTTPMove

This indicates that the requested resource MUST be accessed through the proxy given by the Location
field.

code: 305, title: Use Proxy

exception HTTPTemporaryRedirect(location=”, detail=None, headers=None, com-


ment=None, body_template=None, **kw)
subclass of _HTTPMove

This indicates that the requested resource resides temporarily under a different URI.

code: 307, title: Temporary Redirect

exception HTTPBadRequest(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)
subclass of HTTPClientError

This indicates that the body or headers failed validity checks, preventing the server from being able
to continue processing.

code: 400, title: Bad Request

exception HTTPUnauthorized(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)
subclass of HTTPClientError

This indicates that the request requires user authentication.

code: 401, title: Unauthorized

exception HTTPPaymentRequired(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)
subclass of HTTPClientError

code: 402, title: Payment Required

798 Contents
The Pyramid Web Framework, Version 1.9.4

exception HTTPForbidden(detail=None, headers=None, comment=None,


body_template=None, result=None, **kw)
subclass of HTTPClientError

This indicates that the server understood the request, but is refusing to fulfill it.

code: 403, title: Forbidden

Raise this exception within view code to immediately return the forbidden view to the invoking
user. Usually this is a basic 403 page, but the forbidden view can be customized as necessary. See
Changing the Forbidden View. A Forbidden exception will be the context of a Forbidden
View.

This exception’s constructor treats two arguments specially. The first argument, detail, should
be a string. The value of this string will be used as the message attribute of the exception object.
The second special keyword argument, result is usually an instance of pyramid.security.
Denied or pyramid.security.ACLDenied each of which indicates a reason for the forbid-
den error. However, result is also permitted to be just a plain boolean False object or None.
The result value will be used as the result attribute of the exception object. It defaults to
None.

The Forbidden View can use the attributes of a Forbidden exception as necessary to provide extended
information in an error report shown to a user.

exception HTTPNotFound(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)
subclass of HTTPClientError

This indicates that the server did not find anything matching the Request-URI.

code: 404, title: Not Found

Raise this exception within view code to immediately return the Not Found View to the invoking
user. Usually this is a basic 404 page, but the Not Found View can be customized as necessary. See
Changing the Not Found View.

This exception’s constructor accepts a detail argument (the first argument), which should be a
string. The value of this string will be available as the message attribute of this exception, for
availability to the Not Found View.

0.4. API Documentation 799


The Pyramid Web Framework, Version 1.9.4

exception HTTPMethodNotAllowed(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None,
**kw)
subclass of HTTPClientError

This indicates that the method specified in the Request-Line is not allowed for the resource identified
by the Request-URI.

code: 405, title: Method Not Allowed

exception HTTPNotAcceptable(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)
subclass of HTTPClientError

This indicates the resource identified by the request is only capable of generating response entities
which have content characteristics not acceptable according to the accept headers sent in the request.

code: 406, title: Not Acceptable

exception HTTPProxyAuthenticationRequired(detail=None, headers=None, com-


ment=None, body_template=None,
json_formatter=None, **kw)
subclass of HTTPClientError

This is similar to 401, but indicates that the client must first authenticate itself with the proxy.

code: 407, title: Proxy Authentication Required

exception HTTPRequestTimeout(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)
subclass of HTTPClientError

This indicates that the client did not produce a request within the time that the server was prepared
to wait.

code: 408, title: Request Timeout

exception HTTPConflict(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)
subclass of HTTPClientError

This indicates that the request could not be completed due to a conflict with the current state of the
resource.

code: 409, title: Conflict

800 Contents
The Pyramid Web Framework, Version 1.9.4

exception HTTPGone(detail=None, headers=None, comment=None, body_template=None,


json_formatter=None, **kw)
subclass of HTTPClientError

This indicates that the requested resource is no longer available at the server and no forwarding
address is known.

code: 410, title: Gone

exception HTTPLengthRequired(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)
subclass of HTTPClientError

This indicates that the server refuses to accept the request without a defined Content-Length.

code: 411, title: Length Required

exception HTTPPreconditionFailed(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None,
**kw)
subclass of HTTPClientError

This indicates that the precondition given in one or more of the request-header fields evaluated to
false when it was tested on the server.

code: 412, title: Precondition Failed

exception HTTPRequestEntityTooLarge(detail=None, headers=None, com-


ment=None, body_template=None,
json_formatter=None, **kw)
subclass of HTTPClientError

This indicates that the server is refusing to process a request because the request entity is larger than
the server is willing or able to process.

code: 413, title: Request Entity Too Large

exception HTTPRequestURITooLong(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None,
**kw)
subclass of HTTPClientError

This indicates that the server is refusing to service the request because the Request-URI is longer
than the server is willing to interpret.

code: 414, title: Request-URI Too Long

0.4. API Documentation 801


The Pyramid Web Framework, Version 1.9.4

exception HTTPUnsupportedMediaType(detail=None, headers=None, com-


ment=None, body_template=None,
json_formatter=None, **kw)
subclass of HTTPClientError

This indicates that the server is refusing to service the request because the entity of the request is in
a format not supported by the requested resource for the requested method.

code: 415, title: Unsupported Media Type

exception HTTPRequestRangeNotSatisfiable(detail=None, headers=None, com-


ment=None, body_template=None,
json_formatter=None, **kw)
subclass of HTTPClientError

The server SHOULD return a response with this status code if a request included a Range request-
header field, and none of the range-specifier values in this field overlap the current extent of the
selected resource, and the request did not include an If-Range request-header field.

code: 416, title: Request Range Not Satisfiable

exception HTTPExpectationFailed(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None,
**kw)
subclass of HTTPClientError

This indidcates that the expectation given in an Expect request-header field could not be met by this
server.

code: 417, title: Expectation Failed

exception HTTPUnprocessableEntity(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None,
**kw)
subclass of HTTPClientError

This indicates that the server is unable to process the contained instructions.

May be used to notify the client that their JSON/XML is well formed, but not correct for the current
request.

See RFC4918 section 11 for more information.

code: 422, title: Unprocessable Entity

802 Contents
The Pyramid Web Framework, Version 1.9.4

exception HTTPLocked(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)
subclass of HTTPClientError

This indicates that the resource is locked.

code: 423, title: Locked

exception HTTPFailedDependency(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None,
**kw)
subclass of HTTPClientError

This indicates that the method could not be performed because the requested action depended on
another action and that action failed.

code: 424, title: Failed Dependency

exception HTTPInternalServerError(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None,
**kw)
subclass of HTTPServerError

This indicates that the server encountered an unexpected condition which prevented it from fulfilling
the request.

code: 500, title: Internal Server Error

exception HTTPNotImplemented(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)
subclass of HTTPServerError

This indicates that the server does not support the functionality required to fulfill the request.

code: 501, title: Not Implemented

exception HTTPBadGateway(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)
subclass of HTTPServerError

This indicates that the server, while acting as a gateway or proxy, received an invalid response from
the upstream server it accessed in attempting to fulfill the request.

code: 502, title: Bad Gateway

0.4. API Documentation 803


The Pyramid Web Framework, Version 1.9.4

exception HTTPServiceUnavailable(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None,
**kw)
subclass of HTTPServerError

This indicates that the server is currently unable to handle the request due to a temporary overloading
or maintenance of the server.

code: 503, title: Service Unavailable

exception HTTPGatewayTimeout(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None, **kw)
subclass of HTTPServerError

This indicates that the server, while acting as a gateway or proxy, did not receive a timely response
from the upstream server specified by the URI (e.g. HTTP, FTP, LDAP) or some other auxiliary
server (e.g. DNS) it needed to access in attempting to complete the request.

code: 504, title: Gateway Timeout

exception HTTPVersionNotSupported(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None,
**kw)
subclass of HTTPServerError

This indicates that the server does not support, or refuses to support, the HTTP protocol version that
was used in the request message.

code: 505, title: HTTP Version Not Supported

exception HTTPInsufficientStorage(detail=None, headers=None, comment=None,


body_template=None, json_formatter=None,
**kw)
subclass of HTTPServerError

This indicates that the server does not have enough space to save the resource.

code: 507, title: Insufficient Storage

804 Contents
The Pyramid Web Framework, Version 1.9.4

pyramid.i18n

class TranslationString
The constructor for a translation string. A translation string is a Unicode-like object that has some
extra metadata.

This constructor accepts one required argument named msgid. msgid must be the message iden-
tifier for the translation string. It must be a unicode object or a str object encoded in the default
system encoding.

Optional keyword arguments to this object’s constructor include domain, default, and
mapping.

domain represents the translation domain. By default, the translation domain is None, indicating
that this translation string is associated with the default translation domain (usually messages).

default represents an explicit default text for this translation string. Default text appears when
the translation string cannot be translated. Usually, the msgid of a translation string serves double
duty as its default text. However, using this option you can provide a different default text for this
translation string. This feature is useful when the default of a translation string is too complicated
or too long to be used as a message identifier. If default is provided, it must be a unicode
object or a str object encoded in the default system encoding (usually means ASCII). If default
is None (its default value), the msgid value used by this translation string will be assumed to be
the value of default.

mapping, if supplied, must be a dictionary-like object which represents the replacement values for
any translation string replacement marker instances found within the msgid (or default) value
of this translation string.

context represents the translation context. By default, the translation context is None.

After a translation string is constructed, it behaves like most other unicode objects; its msgid
value will be displayed when it is treated like a unicode object. Only when its ugettext method
is called will it be translated.

Its default value is available as the default attribute of the object, its translation domain is avail-
able as the domain attribute, and the mapping is available as the mapping attribute. The object
otherwise behaves much like a Unicode string.

TranslationStringFactory(factory_domain)
Create a factory which will generate translation strings without requiring that each call to the factory
be passed a domain value. A single argument is passed to this class’ constructor: domain. This
value will be used as the domain values of translationstring.TranslationString
objects generated by the __call__ of this class. The msgid, mapping, and default values
provided to the __call__ method of an instance of this class have the meaning as described by
the constructor of the translationstring.TranslationString

0.4. API Documentation 805


The Pyramid Web Framework, Version 1.9.4

class Localizer(locale_name, translations)


An object providing translation and pluralizations related to the current request’s locale
name. A pyramid.i18n.Localizer object is created using the pyramid.i18n.
get_localizer() function.

locale_name
The locale name for this localizer (e.g. en or en_US).

pluralize(singular, plural, n, domain=None, mapping=None)


Return a Unicode string translation by using two message identifier objects as a singular/plural
pair and an n value representing the number that appears in the message using gettext plural
forms support. The singular and plural objects should be unicode strings. There is no
reason to use translation string objects as arguments as all metadata is ignored.

n represents the number of elements. domain is the translation domain to use to do the
pluralization, and mapping is the interpolation mapping that should be used on the result. If
the domain is not supplied, a default domain is used (usually messages).

Example:

num = 1
translated = localizer.pluralize('Add ${num} item',
'Add ${num} items',
num,
mapping={'num':num})

If using the gettext plural support, which is required for languages that have pluralisation rules
other than n != 1, the singular argument must be the message_id defined in the translation
file. The plural argument is not used in this case.

Example:

num = 1
translated = localizer.pluralize('item_plural',
'',
num,
mapping={'num':num})

translate(tstring, domain=None, mapping=None)


Translate a translation string to the current language and interpolate any replacement mark-
ers in the result. The translate method accepts three arguments: tstring (required),
domain (optional) and mapping (optional). When called, it will translate the tstring

806 Contents
The Pyramid Web Framework, Version 1.9.4

translation string to a unicode object using the current locale. If the current locale could
not be determined, the result of interpolation of the default value is returned. The optional
domain argument can be used to specify or override the domain of the tstring (useful
when tstring is a normal string rather than a translation string). The optional mapping
argument can specify or override the tstring interpolation mapping, useful when the
tstring argument is a simple string instead of a translation string.

Example:

from pyramid.18n import TranslationString


ts = TranslationString('Add ${item}', domain='mypackage',
mapping={'item':'Item'})
translated = localizer.translate(ts)

Example:

translated = localizer.translate('Add ${item}', domain=


,→'mypackage',

mapping={'item':'Item'})

get_localizer(request)
Deprecated since version 1.5: Use the pyramid.request.Request.localizer attribute
directly instead. Retrieve a pyramid.i18n.Localizer object corresponding to the current
request’s locale name.

negotiate_locale_name(request)
Negotiate and return the locale name associated with the current request.

get_locale_name(request)
Deprecated since version 1.5: Use pyramid.request.Request.locale_name directly in-
stead. Return the locale name associated with the current request.

default_locale_negotiator(request)
The default locale negotiator. Returns a locale name or None.

• First, the negotiator looks for the _LOCALE_ attribute of the request object (possibly set by a
view or a listener for an event). If the attribute exists and it is not None, its value will be used.

• Then it looks for the request.params['_LOCALE_'] value.

• Then it looks for the request.cookies['_LOCALE_'] value.

0.4. API Documentation 807


The Pyramid Web Framework, Version 1.9.4

• Finally, the negotiator returns None if the locale could not be determined via any of the pre-
vious checks (when a locale negotiator returns None, it signifies that the default locale name
should be used.)

make_localizer(current_locale_name, translation_directories)
Create a pyramid.i18n.Localizer object corresponding to the provided locale name from
the translations found in the list of translation directories.

See Internationalization and Localization for more information about using Pyramid internationalization
and localization services within an application.

pyramid.interfaces

Event-Related Interfaces

interface IApplicationCreated
Event issued when the pyramid.config.Configurator.make_wsgi_app()
method is called. See the documentation attached to pyramid.events.
ApplicationCreated for more information.

For backwards compatibility with Pyramid versions before


1.0, this interface can also be imported as pyramid.interfaces.
IWSGIApplicationCreatedEvent.

app
Created application

interface INewRequest
An event type that is emitted whenever Pyramid begins to process a new request. See the
documentation attached to pyramid.events.NewRequest for more information.

request
The request object

808 Contents
The Pyramid Web Framework, Version 1.9.4

interface IContextFound
An event type that is emitted after Pyramid finds a context object but before it calls any
view code. See the documentation attached to pyramid.events.ContextFound
for more information.

For backwards compatibility with versions of Pyramid before 1.0, this event in-
terface can also be imported as pyramid.interfaces.IAfterTraversal.

request
The request object

interface IBeforeTraversal
An event type that is emitted after Pyramid attempted to find a route but before it calls
any traversal or view code. See the documentation attached to pyramid.events.
Routefound for more information.

request
The request object

interface INewResponse
An event type that is emitted whenever any Pyramid view returns a response. See
the documentation attached to pyramid.events.NewResponse for more infor-
mation.

request
The request object

response
The response object

interface IBeforeRender
Extends: pyramid.interfaces.IDict

Subscribers to this event may introspect and modify the set of renderer globals before
they are passed to a renderer. The event object itself provides a dictionary-like interface
for adding and removing renderer globals. The keys and values of the dictionary are
those globals. For example:

0.4. API Documentation 809


The Pyramid Web Framework, Version 1.9.4

from repoze.events import subscriber


from pyramid.interfaces import IBeforeRender

@subscriber(IBeforeRender)
def add_global(event):
event['mykey'] = 'foo'

See also:

See also Using the Before Render Event.

rendering_val
The value returned by a view or passed to a render method for this rendering.
This feature is new in Pyramid 1.2.

Other Interfaces

interface IAuthenticationPolicy
An object representing a Pyramid authentication policy.

authenticated_userid(request)
Return the authenticated userid or None if no authenticated userid can be found.
This method of the policy should ensure that a record exists in whatever persistent
store is used related to the user (the user should not have been deleted); if a record
associated with the current id does not exist in a persistent store, it should return
None.

unauthenticated_userid(request)
Return the unauthenticated userid. This method performs the same duty as
authenticated_userid but is permitted to return the userid based only on
data present in the request; it needn’t (and shouldn’t) check any persistent store to
ensure that the user record related to the request userid exists.

This method is intended primarily a helper to assist the


authenticated_userid method in pulling credentials out of the re-
quest data, abstracting away the specific headers, query strings, etc that are used to
authenticate the request.

810 Contents
The Pyramid Web Framework, Version 1.9.4

effective_principals(request)
Return a sequence representing the effective principals typically including the
userid and any groups belonged to by the current user, always including
’system’ groups such as pyramid.security.Everyone and pyramid.
security.Authenticated.

remember(request, userid, **kw)


Return a set of headers suitable for ’remembering’ the userid named userid when
set in a response. An individual authentication policy and its consumers can decide
on the composition and meaning of **kw.

forget(request)
Return a set of headers suitable for ’forgetting’ the current user on subsequent re-
quests.

interface IAuthorizationPolicy
An object representing a Pyramid authorization policy.

permits(context, principals, permission)


Return an instance of pyramid.security.Allowed if any of the
principals is allowed the permission in the current context, else
return an instance of pyramid.security.Denied.

principals_allowed_by_permission(context, permission)
Return a set of principal identifiers allowed by the permission in context.
This behavior is optional; if you choose to not implement it you should de-
fine this method as something which raises a NotImplementedError.
This method will only be called when the pyramid.security.
principals_allowed_by_permission API is used.

interface IExceptionResponse
Extends: pyramid.interfaces.IException, pyramid.interfaces.
IResponse

An interface representing a WSGI response which is also an exception object. Register


an exception view using this interface as a context to apply the registered view
for all exception types raised by Pyramid internally (any exception that inherits from
pyramid.response.Response, including pyramid.httpexceptions.
HTTPNotFound and pyramid.httpexceptions.HTTPForbidden).

prepare(environ)
Prepares the response for being called as a WSGI application

0.4. API Documentation 811


The Pyramid Web Framework, Version 1.9.4

interface IRoute
Interface representing the type of object returned from IRoutesMapper.
get_route
name
The route name
pattern
The route pattern
factory
The root factory used by the Pyramid router when this route matches (or None)
predicates
A sequence of route predicate objects used to determine if a request matches this
route or not after basic pattern matching has been completed.
pregenerator
This attribute should either be None or a callable object implementing the
IRoutePregenerator interface
match(path)
If the path passed to this function can be matched by the pattern of this route,
return a dictionary (the ’matchdict’), which will contain keys representing the dy-
namic segment markers in the pattern mapped to values extracted from the provided
path.
If the path passed to this function cannot be matched by the pattern of this
route, return None.
generate(kw)
Generate a URL based on filling in the dynamic segment markers in the pattern
using the kw dictionary provided.
interface IRoutePregenerator

__call__(request, elements, kw)


A pregenerator is a function associated by a developer with a route. The pregen-
erator for a route is called by pyramid.request.Request.route_url()
in order to adjust the set of arguments passed to it by the user for special pur-
poses, such as Pylons ’subdomain’ support. It will influence the URL returned
by route_url.
A pregenerator should return a two-tuple of (elements, kw) after examin-
ing the originals passed to this function, which are the arguments (request,
elements, kw). The simplest pregenerator is:

812 Contents
The Pyramid Web Framework, Version 1.9.4

def pregenerator(request, elements, kw):


return elements, kw

You can employ a pregenerator by passing a pregenerator argument to the


pyramid.config.Configurator.add_route() function.

interface ICSRFStoragePolicy
An object that offers the ability to verify CSRF tokens and generate new ones.

new_csrf_token(request)
Create and return a new, random cross-site request forgery protection token. The
token will be an ascii-compatible unicode string.

get_csrf_token(request)
Return a cross-site request forgery protection token. It will be an ascii-
compatible unicode string. If a token was previously set for this user via
new_csrf_token, that token will be returned. If no CSRF token was previ-
ously set, new_csrf_token will be called, which will create and set a token,
and this token will be returned.

check_csrf_token(request, token)
Determine if the supplied token is valid. Most implementations should simply
compare the token to the current value of get_csrf_token but it is possible
to verify the token using any mechanism necessary using this method.

Returns True if the token is valid, otherwise False.

interface ISession
Extends: pyramid.interfaces.IDict

An interface representing a session (a web session object, usually accessed via


request.session.

Keys and values of a session must be pickleable.

Changed in version 1.9: Sessions are no longer required to implement


get_csrf_token and new_csrf_token. CSRF token support was moved
to the pluggable pyramid.interfaces.ICSRFStoragePolicy configuration
hook.

created
Integer representing Epoch time when created.

0.4. API Documentation 813


The Pyramid Web Framework, Version 1.9.4

new
Boolean attribute. If True, the session is new.

invalidate()
Invalidate the session. The action caused by invalidate is implementation-
dependent, but it should have the effect of completely dissociating any data stored
in the session with the current request. It might set response values (such as one
which clears a cookie), or it might not.

An invalidated session may be used after the call to invalidate with the effect
that a new session is created to store the data. This enables workflows requiring an
entirely new session, such as in the case of changing privilege levels or preventing
fixation attacks.

changed()
Mark the session as changed. A user of a session should call this method after
he or she mutates a mutable object that is a value of the session (it should not be
required after mutating the session itself). For example, if the user has stored a dic-
tionary in the session under the key foo, and he or she does session['foo']
= {}, changed() needn’t be called. However, if subsequently he or she does
session['foo']['a'] = 1, changed() must be called for the sessioning
machinery to notice the mutation of the internal dictionary.

flash(msg, queue=”, allow_duplicate=True)


Push a flash message onto the end of the flash queue represented by queue. An
alternate flash message queue can used by passing an optional queue, which must
be a string. If allow_duplicate is false, if the msg already exists in the queue,
it will not be re-added.

pop_flash(queue=”)
Pop a queue from the flash storage. The queue is removed from flash storage after
this message is called. The queue is returned; it is a list of flash messages added by
pyramid.interfaces.ISession.flash()

peek_flash(queue=”)
Peek at a queue in the flash storage. The queue remains in flash storage after this
message is called. The queue is returned; it is a list of flash messages added by
pyramid.interfaces.ISession.flash()

interface ISessionFactory
An interface representing a factory which accepts a request object and returns an ISession
object

814 Contents
The Pyramid Web Framework, Version 1.9.4

__call__(request)
Return an ISession object

interface IRendererInfo
An object implementing this interface is passed to every renderer factory constructor as
its only argument (conventionally named info)

name
The value passed by the user as the renderer name

package
The ”current package” when the renderer configuration statement was found

type
The renderer type name

registry
The ”current” application registry when the renderer was created

settings
The deployment settings dictionary related to the current application

clone()
Return a shallow copy that does not share any mutable state.

interface IRendererFactory

__call__(info)
Return an object that implements pyramid.interfaces.IRenderer. info
is an object that implements pyramid.interfaces.IRendererInfo.

interface IRenderer

__call__(value, system)
Call the renderer with the result of the view (value) passed in and return a result
(a string or unicode object useful as a response body). Values computed by the
system are passed by the system in the system parameter, which is a dictionary.
Keys in the dictionary include: view (the view callable that returned the value),
renderer_name (the template name or simple name of the renderer), context
(the context object passed to the view), and request (the request object passed to
the view).

0.4. API Documentation 815


The Pyramid Web Framework, Version 1.9.4

interface IRequestFactory
A utility which generates a request

__call__(environ)
Return an instance of pyramid.request.Request

blank(path)
Return an empty request object (see pyramid.request.Request.
blank())

interface IResponseFactory
A utility which generates a response

__call__(request)
Return a response object implementing IResponse, e.g. pyramid.response.
Response). It should handle the case when request is None.

interface IRouter
WSGI application which routes requests to ’view’ code based on a view registry.

registry
Component architecture registry local to this application.

request_context(environ)
Create a new request context from a WSGI environ.

The request context is used to push/pop the threadlocals required when processing
the request. It also contains an initialized pyramid.interfaces.IRequest
instance using the registered pyramid.interfaces.IRequestFactory.
The context may be used as a context manager to control the threadlocal lifecycle:

with router.request_context(environ) as request:


...

Alternatively, the context may be used without the with statement by manually
invoking its begin() and end() methods.

ctx = router.request_context(environ)
request = ctx.begin()
try:
...
finally:
ctx.end()

816 Contents
The Pyramid Web Framework, Version 1.9.4

invoke_request(request)
Invoke the Pyramid request pipeline.

See Request Processing for information on the request pipeline.

The output should be a pyramid.interfaces.IResponse object or a raised


exception.

interface IViewMapperFactory

__call__(self, **kw)
Return an object which implements pyramid.interfaces.IViewMapper.
kw will be a dictionary containing view-specific arguments, such as permission,
predicates, attr, renderer, and other items. An IViewMapperFactory
is used by pyramid.config.Configurator.add_view() to provide a
plugpoint to extension developers who want to modify potential view callable in-
vocation signatures and response values.

interface IViewMapper

__call__(self, object)
Provided with an arbitrary object (a function, class, or instance), returns a callable
with the call signature (context, request). The callable returned should
itself return a Response object. An IViewMapper is returned by pyramid.
interfaces.IViewMapperFactory.

interface IDict

__contains__(k)
Return True if key k exists in the dictionary.

__setitem__(k, value)
Set a key/value pair into the dictionary

__delitem__(k)
Delete an item from the dictionary which is passed to the renderer as the renderer
globals dictionary.

__getitem__(k)
Return the value for key k from the dictionary or raise a KeyError if the key doesn’t
exist

0.4. API Documentation 817


The Pyramid Web Framework, Version 1.9.4

__iter__()
Return an iterator over the keys of this dictionary

get(k, default=None)
Return the value for key k from the renderer dictionary, or the default if no such
value exists.

items()
Return a list of [(k,v)] pairs from the dictionary

keys()
Return a list of keys from the dictionary

values()
Return a list of values from the dictionary

pop(k, default=None)
Pop the key k from the dictionary and return its value. If k doesn’t exist, and default
is provided, return the default. If k doesn’t exist and default is not provided, raise a
KeyError.

popitem()
Pop the item with key k from the dictionary and return it as a two-tuple (k, v). If k
doesn’t exist, raise a KeyError.

setdefault(k, default=None)
Return the existing value for key k in the dictionary. If no value with k exists in
the dictionary, set the default value into the dictionary under the k name passed.
If a value already existed in the dictionary, return it. If a value did not exist in the
dictionary, return the default

update(d)
Update the renderer dictionary with another dictionary d.

clear()
Clear all values from the dictionary

interface IMultiDict
Extends: pyramid.interfaces.IDict

An ordered dictionary that can have multiple values for each key. A multidict adds the
methods getall, getone, mixed, extend, add, and dict_of_lists to the
normal dictionary interface. A multidict data structure is used as request.POST,
request.GET, and request.params within an Pyramid application.

818 Contents
The Pyramid Web Framework, Version 1.9.4

add(key, value)
Add the key and value, not overwriting any previous value.

dict_of_lists()
Returns a dictionary where each key is associated with a list of values.

extend(other=None, **kwargs)
Add a set of keys and values, not overwriting any previous values. The other
structure may be a list of two-tuples or a dictionary. If **kwargs is passed, its
value will overwrite existing values.

getall(key)
Return a list of all values matching the key (may be an empty list)

getone(key)
Get one value matching the key, raising a KeyError if multiple values were found.

mixed()
Returns a dictionary where the values are either single values, or a list of values
when a key/value appears more than once in this dictionary. This is similar to the
kind of dictionary often used to represent the variables in a web request.

interface IResponse
Represents a WSGI response using the WebOb response interface. Some attribute and
method documentation of this interface references RFC 2616.

This interface is most famously implemented by pyramid.response.Response


and the HTTP exception classes in pyramid.httpexceptions.

RequestClass
Alias for pyramid.request.Request

__call__(environ, start_response)
WSGI call interface, should call the start_response callback and should return an
iterable

accept_ranges
Gets and sets and deletes the Accept-Ranges header. For more information on
Accept-Ranges see RFC 2616, section 14.5

age
Gets and sets and deletes the Age header. Converts using int. For more information
on Age see RFC 2616, section 14.6.

0.4. API Documentation 819


The Pyramid Web Framework, Version 1.9.4

allow
Gets and sets and deletes the Allow header. Converts using list. For more informa-
tion on Allow see RFC 2616, Section 14.7.

app_iter
Returns the app_iter of the response.

If body was set, this will create an app_iter from that body (a single-item list)

app_iter_range(start, stop)
Return a new app_iter built from the response app_iter that serves up only the given
start:stop range.

body
The body of the response, as a str. This will read in the entire app_iter if necessary.

body_file
A file-like object that can be used to write to the body. If you passed in a list app_iter,
that app_iter will be modified by writes.

cache_control
Get/set/modify the Cache-Control header (RFC 2616 section 14.9)

cache_expires
Get/set the Cache-Control and Expires headers. This sets the response to expire in
the number of seconds passed when set.

charset
Get/set the charset (in the Content-Type)

conditional_response_app(environ, start_response)
Like the normal __call__ interface, but checks conditional headers:
• If-Modified-Since (304 Not Modified; only on GET, HEAD)
• If-None-Match (304 Not Modified; only on GET, HEAD)
• Range (406 Partial Content; only on GET, HEAD)

content_disposition
Gets and sets and deletes the Content-Disposition header. For more information on
Content-Disposition see RFC 2616 section 19.5.1.

content_encoding
Gets and sets and deletes the Content-Encoding header. For more information about
Content-Encoding see RFC 2616 section 14.11.

820 Contents
The Pyramid Web Framework, Version 1.9.4

content_language
Gets and sets and deletes the Content-Language header. Converts using list. For
more information about Content-Language see RFC 2616 section 14.12.

content_length
Gets and sets and deletes the Content-Length header. For more information on
Content-Length see RFC 2616 section 14.17. Converts using int.

content_location
Gets and sets and deletes the Content-Location header. For more information on
Content-Location see RFC 2616 section 14.14.

content_md5
Gets and sets and deletes the Content-MD5 header. For more information on
Content-MD5 see RFC 2616 section 14.14.

content_range
Gets and sets and deletes the Content-Range header. For more information on
Content-Range see section 14.16. Converts using ContentRange object.

content_type
Get/set the Content-Type header (or None), without the charset or any parameters.
If you include parameters (or ; at all) when setting the content_type, any existing
parameters will be deleted; otherwise they will be preserved.

content_type_params
A dictionary of all the parameters in the content type. This is not a view, set to
change, modifications of the dict would not be applied otherwise.

copy()
Makes a copy of the response and returns the copy.

date
Gets and sets and deletes the Date header. For more information on Date see RFC
2616 section 14.18. Converts using HTTP date.

delete_cookie(name, path=’/’, domain=None)


Delete a cookie from the client. Note that path and domain must match how the
cookie was originally set. This sets the cookie to the empty string, and max_age=0
so that it should expire immediately.

encode_content(encoding=’gzip’, lazy=False)
Encode the content with the given encoding (only gzip and identity are supported).

0.4. API Documentation 821


The Pyramid Web Framework, Version 1.9.4

environ
Get/set the request environ associated with this response, if any.

etag
Gets and sets and deletes the ETag header. For more information on ETag see RFC
2616 section 14.19. Converts using Entity tag.

expires
Gets and sets and deletes the Expires header. For more information on Expires see
RFC 2616 section 14.21. Converts using HTTP date.

headerlist
The list of response headers.

headers
The headers in a dictionary-like object

last_modified
Gets and sets and deletes the Last-Modified header. For more information on Last-
Modified see RFC 2616 section 14.29. Converts using HTTP date.

location
Gets and sets and deletes the Location header. For more information on Location
see RFC 2616 section 14.30.

md5_etag(body=None, set_content_md5=False)
Generate an etag for the response object using an MD5 hash of the body (the body
parameter, or self.body if not given). Sets self.etag. If set_content_md5 is True sets
self.content_md5 as well

merge_cookies(resp)
Merge the cookies that were set on this response with the given resp object (which
can be any WSGI application). If the resp is a webob.Response object, then the
other object will be modified in-place.

pragma
Gets and sets and deletes the Pragma header. For more information on Pragma see
RFC 2616 section 14.32.

request
Return the request associated with this response if any.

822 Contents
The Pyramid Web Framework, Version 1.9.4

retry_after
Gets and sets and deletes the Retry-After header. For more information on Retry-
After see RFC 2616 section 14.37. Converts using HTTP date or delta seconds.

server
Gets and sets and deletes the Server header. For more information on Server see
RFC216 section 14.38.

set_cookie(name, value=”, max_age=None, path=’/’, domain=None, se-


cure=False, httponly=False, comment=None, expires=None,
overwrite=False)
Set (add) a cookie for the response

status
The status string.

status_int
The status as an integer

unicode_body
Get/set the unicode value of the body (using the charset of the Content-Type)

unset_cookie(name, strict=True)
Unset a cookie with the given name (remove it from the response).

vary
Gets and sets and deletes the Vary header. For more information on Vary see section
14.44. Converts using list.

www_authenticate
Gets and sets and deletes the WWW-Authenticate header. For more information on
WWW-Authenticate see RFC 2616 section 14.47. Converts using ’parse_auth’ and
’serialize_auth’.

interface IIntrospectable
An introspectable object used for configuration introspection. In addition to the methods
below, objects which implement this interface must also implement all the methods of
Python’s collections.MutableMapping (the ”dictionary interface”), and must
be hashable.

title
Text title describing this introspectable

0.4. API Documentation 823


The Pyramid Web Framework, Version 1.9.4

type_name
Text type name describing this introspectable
order
integer order in which registered with introspector (managed by introspector, usu-
ally)
category_name
introspection category name
discriminator
introspectable discriminator (within category) (must be hashable)
discriminator_hash
an integer hash of the discriminator
action_info
An IActionInfo object representing the caller that invoked the creation of this intro-
spectable (usually a sentinel until updated during self.register)
relate(category_name, discriminator)
Indicate an intent to relate this IIntrospectable with another IIntrospectable (the
one associated with the category_name and discriminator) during action
execution.
unrelate(category_name, discriminator)
Indicate an intent to break the relationship between this IIntrospectable with
another IIntrospectable (the one associated with the category_name and
discriminator) during action execution.
register(introspector, action_info)
Register this IIntrospectable with an introspector. This method is invoked
during action execution. Adds the introspectable and its relations to the in-
trospector. introspector should be an object implementing IIntrospec-
tor. action_info should be a object implementing the interface pyramid.
interfaces.IActionInfo representing the call that registered this intro-
spectable. Pseudocode for an implementation of this method:

def register(self, introspector, action_info):


self.action_info = action_info
introspector.add(self)
for methodname, category_name, discriminator in␣
,→self._relations:

method = getattr(introspector, methodname)


method((i.category_name, i.discriminator),
(category_name, discriminator))

824 Contents
The Pyramid Web Framework, Version 1.9.4

__hash__()
Introspectables must be hashable. The typical implementation of an in-
trosepectable’s __hash__ is:

return hash((self.category_name,) + (self.


,→discriminator,))

interface IIntrospector

get(category_name, discriminator, default=None)


Get the IIntrospectable related to the category_name and the discriminator (or dis-
criminator hash) discriminator. If it does not exist in the introspector, return
the value of default

get_category(category_name, default=None, sort_key=None)


Get a sequence of dictionaries in the form
[{'introspectable':IIntrospectable,
'related':[sequence of related IIntrospectables]},
...] where each introspectable is part of the category associated with
category_name .

If the category named category_name does not exist in the introspector the value
passed as default will be returned.

If sort_key is None, the sequence will be returned in the order the introspecta-
bles were added to the introspector. Otherwise, sort_key should be a function that
accepts an IIntrospectable and returns a value from it (ala the key function of
Python’s sorted callable).

categories()
Return a sorted sequence of category names known by this introspector

categorized(sort_key=None)
Get a sequence of tuples in the form [(category_name,
[{'introspectable':IIntrospectable,
'related':[sequence of related IIntrospectables]}, .
..])] representing all known introspectables. If sort_key is None, each
introspectables sequence will be returned in the order the introspectables were
added to the introspector. Otherwise, sort_key should be a function that accepts
an IIntrospectable and returns a value from it (ala the key function of Python’s
sorted callable).

0.4. API Documentation 825


The Pyramid Web Framework, Version 1.9.4

remove(category_name, discriminator)
Remove the IIntrospectable related to category_name and discriminator
from the introspector, and fix up any relations that the introspectable participates
in. This method will not raise an error if an introspectable related to the category
name and discriminator does not exist.

related(intr)
Return a sequence of IIntrospectables related to the IIntrospectable intr. Return
the empty sequence if no relations for exist.

add(intr)
Add the IIntrospectable intr (use instead of pyramid.interfaces.
IIntrospector.add() when you have a custom IIntrospectable). Replaces
any existing introspectable registered using the same category/discriminator.

This method is not typically called directly, instead it’s called indirectly by
pyramid.interfaces.IIntrospector.register()

relate(*pairs)
Given any number of (category_name, discriminator) pairs passed as
positional arguments, relate the associated introspectables to each other. The in-
trospectable related to each pair must have already been added via .add or .
add_intr; a KeyError will result if this is not true. An error will not be raised
if any pair has already been associated with another.

This method is not typically called directly, instead it’s called indirectly by
pyramid.interfaces.IIntrospector.register()

unrelate(*pairs)
Given any number of (category_name, discriminator) pairs passed as
positional arguments, unrelate the associated introspectables from each other. The
introspectable related to each pair must have already been added via .add or .
add_intr; a KeyError will result if this is not true. An error will not be raised
if any pair is not already related to another.

This method is not typically called directly, instead it’s called indirectly by
pyramid.interfaces.IIntrospector.register()

interface IActionInfo
Class which provides code introspection capability associated with an action. The
ParserInfo class used by ZCML implements the same interface.

file
Filename of action-invoking code as a string

826 Contents
The Pyramid Web Framework, Version 1.9.4

line
Starting line number in file (as an integer) of action-invoking code.This will be
None if the value could not be determined.

__str__()
Return a representation of the action information (including source code from file,
if possible)

interface IAssetDescriptor
Describes an asset.

absspec()
Returns the absolute asset specification for this asset (e.g.
mypackage:templates/foo.pt).

abspath()
Returns an absolute path in the filesystem to the asset.

stream()
Returns an input stream for reading asset contents. Raises an exception if the asset
is a directory or does not exist.

isdir()
Returns True if the asset is a directory, otherwise returns False.

listdir()
Returns iterable of filenames of directory contents. Raises an exception if asset is
not a directory.

exists()
Returns True if asset exists, otherwise returns False.

interface IResourceURL

virtual_path
The virtual url path of the resource as a string.

physical_path
The physical url path of the resource as a string.

virtual_path_tuple
The virtual url path of the resource as a tuple. (New in 1.5)

0.4. API Documentation 827


The Pyramid Web Framework, Version 1.9.4

physical_path_tuple
The physical url path of the resource as a tuple. (New in 1.5)

interface ICacheBuster
A cache buster modifies the URL generation machinery for static_url(). See
Cache Busting.

New in version 1.6.

__call__(request, subpath, kw)


Modifies a subpath and/or keyword arguments from which a static asset URL will
be computed during URL generation.

The subpath argument is a path of /-delimited segments that represent the por-
tion of the asset URL which is used to find the asset. The kw argument is a dict of
keywords that are to be passed eventually to static_url() for URL generation.
The return value should be a two-tuple of (subpath, kw) where subpath is
the relative URL from where the file is served and kw is the same input argument.
The return value should be modified to include the cache bust token in the generated
URL.

The kw dictionary contains extra arguments passed to static_url() as well as


some extra items that may be usful including:
• pathspec is the path specification for the resource to be cache busted.
• rawspec is the original location of the file, ignoring any calls to pyramid.
config.Configurator.override_asset().
The pathspec and rawspec values are only different in cases where
an asset has been mounted into a virtual location using pyramid.
config.Configurator.override_asset(). For example,
with a call to request.static_url('myapp:static/foo.
png'), the ``pathspec is myapp:static/foo.png whereas the
rawspec may be themepkg:bar.png, assuming a call to config.
override_asset('myapp:static/foo.png', 'themepkg:bar.
png').

interface IViewDeriver

options
A list of supported options to be passed to pyramid.config.
Configurator.add_view(). This attribute is optional.

828 Contents
The Pyramid Web Framework, Version 1.9.4

__call__(view, info)
Derive a new view from the supplied view.

View options, package information and registry are available on info, an instance
of pyramid.interfaces.IViewDeriverInfo.

The view is a callable accepting (context, request).

interface IViewDeriverInfo
An object implementing this interface is passed to every view deriver during configura-
tion.

registry
The ”current” application registry where the view was created

package
The ”current package” where the view configuration statement was found

settings
The deployment settings dictionary related to the current application

options
The view options passed to the view, including any default values that were not
overriden

predicates
The list of predicates active on the view

original_view
The original view object being wrapped

exception_only
The view will only be invoked for exceptions

pyramid.location

lineage(resource)
Return a generator representing the lineage of the resource object implied by the resource ar-
gument. The generator first returns resource unconditionally. Then, if resource supplies a
__parent__ attribute, return the resource represented by resource.__parent__. If that
resource has a __parent__ attribute, return that resource’s parent, and so on, until the resource
being inspected either has no __parent__ attribute or which has a __parent__ attribute of
None. For example, if the resource tree is:

0.4. API Documentation 829


The Pyramid Web Framework, Version 1.9.4

thing1 = Thing()
thing2 = Thing()
thing2.__parent__ = thing1

Calling lineage(thing2) will return a generator. When we turn it into a list, we will get:

list(lineage(thing2))
[ <Thing object at thing2>, <Thing object at thing1> ]

inside(resource1, resource2)
Is resource1 ’inside’ resource2? Return True if so, else False.

resource1 is ’inside’ resource2 if resource2 is a lineage ancestor of resource1. It is


a lineage ancestor if its parent (or one of its parent’s parents, etc.) is an ancestor.

pyramid.paster

bootstrap(config_uri, request=None, options=None)


Load a WSGI application from the PasteDeploy config file specified by config_uri. The envi-
ronment will be configured as if it is currently serving request, leaving a natural environment in
place to write scripts that can generate URLs and utilize renderers.

This function returns a dictionary with app, root, closer, request, and registry keys.
app is the WSGI app loaded (based on the config_uri), root is the traversal root resource
of the Pyramid application, and closer is a parameterless callback that may be called when your
script is complete (it pops a threadlocal stack).

Most operations within Pyramid expect to be invoked within the context of a WSGI request,
thus it’s important when loading your application to anchor it when executing scripts and other code
that is not normally invoked during active WSGI requests.

For a complex config file containing multiple Pyramid applications, this function will
setup the environment under the context of the last-loaded Pyramid application. You may
load a specific application yourself by using the lower-level functions pyramid.paster.
get_app() and pyramid.scripting.prepare() in conjunction with pyramid.
config.global_registries.

830 Contents
The Pyramid Web Framework, Version 1.9.4

config_uri – specifies the PasteDeploy config file to use for the interactive shell. The format is
inifile#name. If the name is left off, main will be assumed.

request – specified to anchor the script to a given set of WSGI parameters. For example, most
people would want to specify the host, scheme and port such that their script will generate URLs
in relation to those parameters. A request with default parameters is constructed for you if none is
provided. You can mutate the request’s environ later to setup a specific host/port/scheme/etc.

options Is passed to get_app for use as variable assignments like {’http_port’: 8080} and then
use %(http_port)s in the config file.

This function may be used as a context manager to call the closer automatically:

with bootstrap('development.ini') as env:


request = env['request']
# ...

See Writing a Script for more information about how to use this function.

Changed in version 1.8: Added the ability to use the return value as a context manager.

get_app(config_uri, name=None, options=None)


Return the WSGI application named name in the PasteDeploy config file specified by
config_uri.

options, if passed, should be a dictionary used as variable assignments like {'http_port':


8080}. This is useful if e.g. %(http_port)s is used in the config file.

If the name is None, this will attempt to parse the name from the config_uri string expecting
the format inifile#name. If no name is found, the name will default to ”main”.

get_appsettings(config_uri, name=None, options=None)


Return a dictionary representing the key/value pairs in an app section within the file represented by
config_uri.

options, if passed, should be a dictionary used as variable assignments like {'http_port':


8080}. This is useful if e.g. %(http_port)s is used in the config file.

If the name is None, this will attempt to parse the name from the config_uri string expecting
the format inifile#name. If no name is found, the name will default to ”main”.

setup_logging(config_uri, global_conf=None)
Set up Python logging with the filename specified via config_uri (a string in the form
filename#sectionname).

Extra defaults can optionally be specified as a dict in global_conf.

0.4. API Documentation 831


The Pyramid Web Framework, Version 1.9.4

pyramid.path

CALLER_PACKAGE
A constant used by the constructor of pyramid.path.DottedNameResolver and
pyramid.path.AssetResolver.

class DottedNameResolver(package=pyramid.path.CALLER_PACKAGE)
A class used to resolve a dotted Python name to a package or module object.

New in version 1.3.

The constructor accepts a single argument named package which may be any of:

• A fully qualified (not relative) dotted name to a module or package

• a Python module or package object

• The value None

• The constant value pyramid.path.CALLER_PACKAGE.

The default value is pyramid.path.CALLER_PACKAGE.

The package is used when a relative dotted name is supplied to the resolve() method. A
dotted name which has a . (dot) or : (colon) as its first character is treated as relative.

If package is None, the resolver will only be able to resolve fully qualified (not relative) names.
Any attempt to resolve a relative name will result in an ValueError exception.

If package is pyramid.path.CALLER_PACKAGE, the resolver will treat relative dotted names


as relative to the caller of the resolve() method.

If package is a module or module name (as opposed to a package or package name), its containing
package is computed and this package used to derive the package name (all names are resolved rela-
tive to packages, never to modules). For example, if the package argument to this type was passed
the string xml.dom.expatbuilder, and .mindom is supplied to the resolve() method, the
resulting import would be for xml.minidom, because xml.dom.expatbuilder is a module
object, not a package object.

If package is a package or package name (as opposed to a module or module name), this package
will be used to relative compute dotted names. For example, if the package argument to this
type was passed the string xml.dom, and .minidom is supplied to the resolve() method, the
resulting import would be for xml.minidom.

maybe_resolve(dotted)
This method behaves just like resolve(), except if the dotted value passed is not a string,
it is simply returned. For example:

832 Contents
The Pyramid Web Framework, Version 1.9.4

import xml
r = DottedNameResolver()
v = r.maybe_resolve(xml)
# v is the xml module; no exception raised

resolve(dotted)
This method resolves a dotted name reference to a global Python object (an object which can
be imported) to the object itself.

Two dotted name styles are supported:

• pkg_resources-style dotted names where non-module attributes of a package are sep-


arated from the rest of the path using a : e.g. package.module:attr.

• zope.dottedname-style dotted names where non-module attributes of a package are


separated from the rest of the path using a . e.g. package.module.attr.

These styles can be used interchangeably. If the supplied name contains a : (colon),
the pkg_resources resolution mechanism will be chosen, otherwise the zope.
dottedname resolution mechanism will be chosen.

If the dotted argument passed to this method is not a string, a ValueError will be raised.

When a dotted name cannot be resolved, a ValueError error is raised.

Example:

r = DottedNameResolver()
v = r.resolve('xml') # v is the xml module

class AssetResolver(package=pyramid.path.CALLER_PACKAGE)
A class used to resolve an asset specification to an asset descriptor.

New in version 1.3.

The constructor accepts a single argument named package which may be any of:

• A fully qualified (not relative) dotted name to a module or package

• a Python module or package object

0.4. API Documentation 833


The Pyramid Web Framework, Version 1.9.4

• The value None


• The constant value pyramid.path.CALLER_PACKAGE.
The default value is pyramid.path.CALLER_PACKAGE.
The package is used when a relative asset specification is supplied to the resolve() method.
An asset specification without a colon in it is treated as relative.
If package is None, the resolver will only be able to resolve fully qualified (not relative) asset
specifications. Any attempt to resolve a relative asset specification will result in an ValueError
exception.
If package is pyramid.path.CALLER_PACKAGE, the resolver will treat relative asset speci-
fications as relative to the caller of the resolve() method.
If package is a module or module name (as opposed to a package or package name), its con-
taining package is computed and this package is used to derive the package name (all names are
resolved relative to packages, never to modules). For example, if the package argument to this
type was passed the string xml.dom.expatbuilder, and template.pt is supplied to the
resolve() method, the resulting absolute asset spec would be xml.minidom:template.
pt, because xml.dom.expatbuilder is a module object, not a package object.
If package is a package or package name (as opposed to a module or module name), this package
will be used to compute relative asset specifications. For example, if the package argument to this
type was passed the string xml.dom, and template.pt is supplied to the resolve() method,
the resulting absolute asset spec would be xml.minidom:template.pt.
resolve(spec)
Resolve the asset spec named as spec to an object that has the attributes and methods de-
scribed in pyramid.interfaces.IAssetDescriptor.
If spec is an absolute filename (e.g. /path/to/myproject/templates/foo.pt)
or an absolute asset spec (e.g. myproject:templates.foo.pt), an asset descriptor is
returned without taking into account the package passed to this class’ constructor.
If spec is a relative asset specification (an asset specification without a : in it, e.g.
templates/foo.pt), the package argument of the constructor is used as the package
portion of the asset spec. For example:

a = AssetResolver('myproject')
resolver = a.resolve('templates/foo.pt')
print(resolver.abspath())
# -> /path/to/myproject/templates/foo.pt

If the AssetResolver is constructed without a package argument of None, and a relative asset
specification is passed to resolve, an ValueError exception is raised.

834 Contents
The Pyramid Web Framework, Version 1.9.4

pyramid.registry

class Registry(package_name=pyramid.path.CALLER_PACKAGE, *args, **kw)


A registry object is an application registry.

It is used by the framework itself to perform mappings of URLs to view callables, as well as servic-
ing other various framework duties. A registry has its own internal API, but this API is rarely used
by Pyramid application developers (it’s usually only used by developers of the Pyramid framework
and Pyramid addons). But it has a number of attributes that may be useful to application devel-
opers within application code, such as settings, which is a dictionary containing application
deployment settings.

For information about the purpose and usage of the application registry, see Using the Zope Com-
ponent Architecture in Pyramid.

The registry may be used both as an pyramid.interfaces.IDict and as a Zope component


registry. These two ways of storing configuration are independent. Applications will tend to prefer
to store information as key-values whereas addons may prefer to use the component registry to avoid
naming conflicts and to provide more complex lookup mechanisms.

The application registry is usually accessed as request.registry in application code. By the


time a registry is used to handle requests it should be considered frozen and read-only. Any changes
to its internal state should be done with caution and concern for thread-safety.

settings
The dictionary-like deployment settings object. See Deployment Settings for information. This
object is often accessed as request.registry.settings or config.registry.
settings in a typical Pyramid application.

package_name
New in version 1.6.

When a registry is set up (or created) by a Configurator, this attribute will be the shortcut for
pyramid.config.Configurator.package_name.

This attribute is often accessed as request.registry.package_name or config.


registry.package_name or config.package_name in a typical Pyramid applica-
tion.

0.4. API Documentation 835


The Pyramid Web Framework, Version 1.9.4

introspector
New in version 1.3.

When a registry is set up (or created) by a Configurator, the registry will be decorated
with an instance named introspector implementing the pyramid.interfaces.
IIntrospector interface.

See also:

See also pyramid.config.Configurator.introspector.

When a registry is created ”by hand”, however, this attribute will not exist until set up by a
configurator.

This attribute is often accessed as request.registry.introspector in a typical


Pyramid application.

notify(*events)
Fire one or more events. All event subscribers to the event(s) will be notified. The subscribers
will be called synchronously. This method is often accessed as request.registry.
notify in Pyramid applications to fire custom events. See Creating Your Own Events for
more information.

class Introspectable
New in version 1.3.

The default implementation of the interface pyramid.interfaces.IIntrospectable


used by framework exenders. An instance of this class is created when pyramid.config.
Configurator.introspectable is called.

class Deferred(func)
Can be used by a third-party configuration extender to wrap a discriminator during configuration if
an immediately hashable discriminator cannot be computed because it relies on unresolved values.
The function should accept no arguments and should return a hashable discriminator.

New in version 1.4.

undefer(v)
Function which accepts an object and returns it unless it is a pyramid.registry.Deferred
instance. If it is an instance of that class, its resolve method is called, and the result of the method
is returned.

New in version 1.4.

class predvalseq
A subtype of tuple used to represent a sequence of predicate values

New in version 1.4.

836 Contents
The Pyramid Web Framework, Version 1.9.4

pyramid.renderers

get_renderer(renderer_name, package=None)
Return the renderer object for the renderer renderer_name.

You may supply a relative asset spec as renderer_name. If the package argument is supplied,
a relative renderer name will be converted to an absolute asset specification by combining the pack-
age package with the relative asset specification renderer_name. If package is None (the
default), the package name of the caller of this function will be used as the package.

render(renderer_name, value, request=None, package=None)


Using the renderer renderer_name (a template or a static renderer), render the value (or set of
values) present in value. Return the result of the renderer’s __call__ method (usually a string
or Unicode).

If the renderer_name refers to a file on disk, such as when the renderer is a template, it’s usually
best to supply the name as an asset specification (e.g. packagename:path/to/template.
pt).

You may supply a relative asset spec as renderer_name. If the package argument is supplied,
a relative renderer path will be converted to an absolute asset specification by combining the pack-
age package with the relative asset specification renderer_name. If package is None (the
default), the package name of the caller of this function will be used as the package.

The value provided will be supplied as the input to the renderer. Usually, for template renderings,
this should be a dictionary. For other renderers, this will need to be whatever sort of value the
renderer expects.

The ’system’ values supplied to the renderer will include a basic set of top-level system names,
such as request, context, renderer_name, and view. See System Values Used During
Rendering for the full list. If renderer globals have been specified, these will also be used to augment
the value.

Supply a request parameter in order to provide the renderer with the most correct ’system’ values
(request and context in particular).

render_to_response(renderer_name, value, request=None, package=None, re-


sponse=None)
Using the renderer renderer_name (a template or a static renderer), render the value (or set of
values) using the result of the renderer’s __call__ method (usually a string or Unicode) as the
response body.

If the renderer name refers to a file on disk (such as when the renderer is a template), it’s usually
best to supply the name as a asset specification.

0.4. API Documentation 837


The Pyramid Web Framework, Version 1.9.4

You may supply a relative asset spec as renderer_name. If the package argument is supplied, a
relative renderer name will be converted to an absolute asset specification by combining the package
package with the relative asset specification renderer_name. If you do not supply a package
(or package is None) the package name of the caller of this function will be used as the package.

The value provided will be supplied as the input to the renderer. Usually, for template renderings,
this should be a dictionary. For other renderers, this will need to be whatever sort of value the
renderer expects.

The ’system’ values supplied to the renderer will include a basic set of top-level system names,
such as request, context, renderer_name, and view. See System Values Used During
Rendering for the full list. If renderer globals have been specified, these will also be used to argument
the value.

Supply a request parameter in order to provide the renderer with the most correct ’system’ val-
ues (request and context in particular). Keep in mind that any changes made to request.
response prior to calling this function will not be reflected in the resulting response object. A
new response object will be created for each call unless one is passed as the response argument.

Changed in version 1.6: In previous versions, any changes made to request.response outside
of this function call would affect the returned response. This is no longer the case. If you wish to
send in a pre-initialized response then you may pass one in the response argument.

class JSON(serializer=<function dumps>, adapters=(), **kw)


Renderer that returns a JSON-encoded string.

Configure a custom JSON renderer using the add_renderer() API at application startup time:

from pyramid.config import Configurator

config = Configurator()
config.add_renderer('myjson', JSON(indent=4))

Once this renderer is registered as above, you can use myjson as the renderer= parameter to
@view_config or add_view():

from pyramid.view import view_config

@view_config(renderer='myjson')
def myview(request):
return {'greeting':'Hello world'}

838 Contents
The Pyramid Web Framework, Version 1.9.4

Custom objects can be serialized using the renderer by either implementing the __json__ magic
method, or by registering adapters with the renderer. See Serializing Custom Objects for more in-
formation.

The default serializer uses json.JSONEncoder. A different serializer can be specified via
the serializer argument. Custom serializers should accept the object, a callback default,
and any extra kw keyword arguments passed during renderer construction. This feature isn’t widely
used but it can be used to replace the stock JSON serializer with, say, simplejson. If all you want to
do, however, is serialize custom objects, you should use the method explained in Serializing Custom
Objects instead of replacing the serializer.

New in version 1.4: Prior to this version, there was no public API for supplying options to the
underlying serializer without defining a custom renderer.

add_adapter(type_or_iface, adapter)
When an object of the type (or interface) type_or_iface fails to automatically encode
using the serializer, the renderer will use the adapter adapter to convert it into a JSON-
serializable object. The adapter must accept two arguments: the object and the currently active
request.

class Foo(object):
x = 5

def foo_adapter(obj, request):


return obj.x

renderer = JSON(indent=4)
renderer.add_adapter(Foo, foo_adapter)

When you’ve done this, the JSON renderer will be able to serialize instances of the Foo class
when they’re encountered in your view results.

class JSONP(param_name=’callback’, **kw)


JSONP renderer factory helper which implements a hybrid json/jsonp renderer. JSONP is useful for
making cross-domain AJAX requests.

Configure a JSONP renderer using the pyramid.config.Configurator.


add_renderer() API at application startup time:

0.4. API Documentation 839


The Pyramid Web Framework, Version 1.9.4

from pyramid.config import Configurator

config = Configurator()
config.add_renderer('jsonp', JSONP(param_name='callback'))

The class’ constructor also accepts arbitrary keyword arguments. All keyword arguments except
param_name are passed to the json.dumps function as its keyword arguments.

from pyramid.config import Configurator

config = Configurator()
config.add_renderer('jsonp', JSONP(param_name='callback',␣
,→indent=4))

Changed in version 1.4: The ability of this class to accept a **kw in its constructor.

The arguments passed to this class’ constructor mean the same thing as the arguments passed to
pyramid.renderers.JSON (including serializer and adapters).

Once this renderer is registered via add_renderer() as above, you can use jsonp as
the renderer= parameter to @view_config or pyramid.config.Configurator.
add_view`():

from pyramid.view import view_config

@view_config(renderer='jsonp')
def myview(request):
return {'greeting':'Hello world'}

When a view is called that uses the JSONP renderer:

• If there is a parameter in the request’s HTTP query string that matches the param_name
of the registered JSONP renderer (by default, callback), the renderer will return a JSONP
response.

• If there is no callback parameter in the request’s query string, the renderer will return a ’plain’
JSON response.

840 Contents
The Pyramid Web Framework, Version 1.9.4

New in version 1.1.

See also:

See also JSONP Renderer.

add_adapter(type_or_iface, adapter)
When an object of the type (or interface) type_or_iface fails to automatically encode
using the serializer, the renderer will use the adapter adapter to convert it into a JSON-
serializable object. The adapter must accept two arguments: the object and the currently active
request.

class Foo(object):
x = 5

def foo_adapter(obj, request):


return obj.x

renderer = JSON(indent=4)
renderer.add_adapter(Foo, foo_adapter)

When you’ve done this, the JSON renderer will be able to serialize instances of the Foo class
when they’re encountered in your view results.

null_renderer
An object that can be used in advanced integration cases as input to the view configuration
renderer= argument. When the null renderer is used as a view renderer argument, Pyramid
avoids converting the view callable result into a Response object. This is useful if you want to reuse
the view configuration and lookup machinery outside the context of its use by the Pyramid router.

pyramid.request

class Request(environ, charset=None, unicode_errors=None, decode_param_names=None,


**kw)
A subclass of the WebOb Request class. An instance of this class is created by the router and is
provided to a view callable (and to other subsystems) as the request argument.

The documentation below (save for the add_response_callback and


add_finished_callback methods, which are defined in this subclass itself, and the attributes
context, registry, root, subpath, traversed, view_name, virtual_root , and

0.4. API Documentation 841


The Pyramid Web Framework, Version 1.9.4

virtual_root_path, each of which is added to the request by the router at request ingress
time) are autogenerated from the WebOb source code used when this documentation was generated.

Due to technical constraints, we can’t yet display the WebOb version number from which this doc-
umentation is autogenerated, but it will be the ’prevailing WebOb version’ at the time of the release
of this Pyramid version. See https://webob.org/ for further information.

context
The context will be available as the context attribute of the request object. It will be the
context object implied by the current request. See Traversal for information about context
objects.

registry
The application registry will be available as the registry attribute of the request object. See
Using the Zope Component Architecture in Pyramid for more information about the application
registry.

root
The root object will be available as the root attribute of the request object. It will be the
resource object at which traversal started (the root). See Traversal for information about root
objects.

subpath
The traversal subpath will be available as the subpath attribute of the request object. It will
be a sequence containing zero or more elements (which will be Unicode objects). See Traversal
for information about the subpath.

traversed
The ”traversal path” will be available as the traversed attribute of the request object. It will
be a sequence representing the ordered set of names that were used to traverse to the context,
not including the view name or subpath. If there is a virtual root associated with the request,
the virtual root path is included within the traversal path. See Traversal for more information.

view_name
The view name will be available as the view_name attribute of the request object. It will be
a single string (possibly the empty string if we’re rendering a default view). See Traversal for
information about view names.

virtual_root
The virtual root will be available as the virtual_root attribute of the request object. It
will be the virtual root object implied by the current request. See Virtual Hosting for more
information about virtual roots.

842 Contents
The Pyramid Web Framework, Version 1.9.4

virtual_root_path
The virtual root path will be available as the virtual_root_path attribute of the request
object. It will be a sequence representing the ordered set of names that were used to traverse
to the virtual root object. See Virtual Hosting for more information about virtual roots.

exception
If an exception was raised by a root factory or a view callable, or at various other points where
Pyramid executes user-defined code during the processing of a request, the exception object
which was caught will be available as the exception attribute of the request within a excep-
tion view, a response callback or a finished callback. If no exception occurred, the value of
request.exception will be None within response and finished callbacks.

exc_info
If an exception was raised by a root factory or a view callable, or at various other points
where Pyramid executes user-defined code during the processing of a request, result of sys.
exc_info() will be available as the exc_info attribute of the request within a excep-
tion view, a response callback or a finished callback. If no exception occurred, the value of
request.exc_info will be None within response and finished callbacks.

response
This attribute is actually a ”reified” property which returns an instance of the pyramid.
response.Response class. The response object returned does not exist until this attribute
is accessed. Once it is accessed, subsequent accesses to this request object will return the same
Response object.

The request.response API can is used by renderers. A render obtains the response ob-
ject it will return from a view that uses that renderer by accessing request.response.
Therefore, it’s possible to use the request.response API to set up a response object
with ”the right” attributes (e.g. by calling request.response.set_cookie(...)
or request.response.content_type = 'text/plain', etc) within a view that
uses a renderer. For example, within a view that uses a renderer:

response = request.response
response.set_cookie('mycookie', 'mine, all mine!')
return {'text':'Value that will be used by the renderer'}

Mutations to this response object will be preserved in the response sent to the client after
rendering. For more information about using request.response in conjunction with a
renderer, see Varying Attributes of Rendered Responses.

Non-renderer code can also make use of request.response instead of creating a response ”by
hand”. For example, in view code:

0.4. API Documentation 843


The Pyramid Web Framework, Version 1.9.4

response = request.response
response.body = 'Hello!'
response.content_type = 'text/plain'
return response

Note that the response in this circumstance is not ”global”; it still must be returned from the
view code if a renderer is not used.

session
If a session factory has been configured, this attribute will represent the current user’s session
object. If a session factory has not been configured, requesting the request.session
attribute will cause a pyramid.exceptions.ConfigurationError to be raised.

matchdict
If a route has matched during this request, this attribute will be a dictionary containing the
values matched by the URL pattern associated with the route. If a route has not matched
during this request, the value of this attribute will be None. See The Matchdict.

matched_route
If a route has matched during this request, this attribute will be an object representing the route
matched by the URL pattern associated with the route. If a route has not matched during this
request, the value of this attribute will be None. See The Matched Route.

authenticated_userid
New in version 1.5.

A property which returns the userid of the currently authenticated user or None if there is
no authentication policy in effect or there is no currently authenticated user. This differs from
unauthenticated_userid, because the effective authentication policy will have ensured
that a record associated with the userid exists in persistent storage; if it has not, this value will
be None.

unauthenticated_userid
New in version 1.5.

A property which returns a value which represents the claimed (not verified) userid of the cre-
dentials present in the request. None if there is no authentication policy in effect or there is no
user data associated with the current request. This differs from authenticated_userid,
because the effective authentication policy will not ensure that a record associated with the
userid exists in persistent storage. Even if the userid does not exist in persistent storage, this
value will be the value of the userid claimed by the request data.

844 Contents
The Pyramid Web Framework, Version 1.9.4

effective_principals
New in version 1.5.

A property which returns the list of ’effective’ principal identifiers for this request. This list
typically includes the userid of the currently authenticated user if a user is currently authen-
ticated, but this depends on the authentication policy in effect. If no authentication policy is
in effect, this will return a sequence containing only the pyramid.security.Everyone
principal.

invoke_subrequest(request, use_tweens=False)
New in version 1.4a1.

Obtain a response object from the Pyramid application based on information in the request
object provided. The request object must be an object that implements the Pyramid re-
quest interface (such as a pyramid.request.Request instance). If use_tweens is
True, the request will be sent to the tween in the tween stack closest to the request ingress. If
use_tweens is False, the request will be sent to the main router handler, and no tweens
will be invoked.

This function also:

• manages the threadlocal stack (so that get_current_request() and


get_current_registry() work during a request)

• Adds a registry attribute (the current Pyramid registry) and a


invoke_subrequest attribute (a callable) to the request object it’s handed.

• sets request extensions (such as those added via add_request_method() or


set_request_property()) on the request it’s passed.

• causes a NewRequest event to be sent at the beginning of request processing.

• causes a ContextFound event to be sent when a context resource is found.

• Ensures that the user implied by the request passed has the necessary authorization to
invoke view callable before calling it.

• Calls any response callback functions defined within the request’s lifetime if a response
is obtained from the Pyramid application.

• causes a NewResponse event to be sent if a response is obtained.

• Calls any finished callback functions defined within the request’s lifetime.

0.4. API Documentation 845


The Pyramid Web Framework, Version 1.9.4

invoke_subrequest isn’t actually a method of the Request object; it’s a callable added
when the Pyramid router is invoked, or when a subrequest is invoked. This means that it’s not
available for use on a request provided by e.g. the pshell environment.

See also:

See also Invoking a Subrequest.

invoke_exception_view(exc_info=None, request=None, secure=True,


reraise=False)
Executes an exception view related to the request it’s called upon. The arguments it takes are
these:

exc_info

If provided, should be a 3-tuple in the form provided by sys.exc_info(). If


not provided, sys.exc_info() will be called to obtain the current interpreter
exception information. Default: None.

request

If the request to be used is not the same one as the instance that this method is called
upon, it may be passed here. Default: None.

secure

If the exception view should not be rendered if the current user does not have the
appropriate permission, this should be True. Default: True.

reraise

A boolean indicating whether the original error should be reraised if a response


object could not be created. If False then an pyramid.httpexceptions.
HTTPNotFound` exception will be raised. Default: False.

If a response is generated then request.exception and request.exc_info will be


left at the values used to render the response. Otherwise the previous values for request.
exception and request.exc_info will be restored.

New in version 1.7.

Changed in version 1.9: The request.exception and request.exc_info properties


will reflect the exception used to render the response where previously they were reset to the
values prior to invoking the method.

Also added the reraise argument.

846 Contents
The Pyramid Web Framework, Version 1.9.4

has_permission(permission, context=None)
Given a permission and an optional context, returns an instance of pyramid.security.
Allowed if the permission is granted to this request with the provided context, or the
context already associated with the request. Otherwise, returns an instance of pyramid.
security.Denied. This method delegates to the current authentication and authoriza-
tion policies. Returns pyramid.security.Allowed unconditionally if no authentica-
tion policy has been registered for this request. If context is not supplied or is supplied as
None, the context used is the request.context attribute.
Parameters
• permission (unicode, str) – Does this request have the given permis-
sion?
• context (object) – A resource object or None
Returns Either pyramid.security.Allowed or pyramid.security.
Denied.
New in version 1.5.
add_response_callback(callback)
Add a callback to the set of callbacks to be called by the router at a point after a response object
is successfully created. Pyramid does not have a global response object: this functionality
allows an application to register an action to be performed against the response once one is
created.
A ’callback’ is a callable which accepts two positional parameters: request and response.
For example:

1 def cache_callback(request, response):


2 'Set the cache_control max_age for the response'
3 response.cache_control.max_age = 360
4 request.add_response_callback(cache_callback)

Response callbacks are called in the order they’re added (first-to-most-recently-added). No


response callback is called if an exception happens in application code, or if the response
object returned by view code is invalid.
All response callbacks are called after the tweens and before the pyramid.events.
NewResponse event is sent.
Errors raised by callbacks are not handled specially. They will be propagated to the caller of
the Pyramid router application.
See also:
See also Using Response Callbacks.

0.4. API Documentation 847


The Pyramid Web Framework, Version 1.9.4

add_finished_callback(callback)
Add a callback to the set of callbacks to be called unconditionally by the router at the very end
of request processing.

callback is a callable which accepts a single positional parameter: request. For example:

1 import transaction
2

3 def commit_callback(request):
4 '''commit or abort the transaction associated with␣
,→request'''

5 if request.exception is not None:


6 transaction.abort()
7 else:
8 transaction.commit()
9 request.add_finished_callback(commit_callback)

Finished callbacks are called in the order they’re added ( first- to most-recently- added). Fin-
ished callbacks (unlike response callbacks) are always called, even if an exception happens in
application code that prevents a response from being generated.

The set of finished callbacks associated with a request are called very late in the processing
of that request; they are essentially the last thing called by the router. They are called after
response processing has already occurred in a top-level finally: block within the router
request processing code. As a result, mutations performed to the request provided to a
finished callback will have no meaningful effect, because response processing will have already
occurred, and the request’s scope will expire almost immediately after all finished callbacks
have been processed.

Errors raised by finished callbacks are not handled specially. They will be propagated to the
caller of the Pyramid router application.

See also:

See also Using Finished Callbacks.

route_url(route_name, *elements, **kw)


Generates a fully qualified URL for a named Pyramid route configuration.

Use the route’s name as the first positional argument. Additional positional arguments
(*elements) are appended to the URL as path segments after it is generated.

848 Contents
The Pyramid Web Framework, Version 1.9.4

Use keyword arguments to supply values which match any dynamic path elements in the route
definition. Raises a KeyError exception if the URL cannot be generated for any reason (not
enough arguments, for example).

For example, if you’ve defined a route named ”foobar” with the path {foo}/{bar}/
*traverse:

request.route_url('foobar',
foo='1') => <KeyError␣
,→exception>

request.route_url('foobar',
foo='1',
bar='2') => <KeyError␣
,→exception>

request.route_url('foobar',
foo='1',
bar='2',
traverse=('a','b')) => http://e.com/1/2/
,→a/b

request.route_url('foobar',
foo='1',
bar='2',
traverse='/a/b') => http://e.com/1/2/
,→a/b

Values replacing :segment arguments can be passed as strings or Unicode objects. They
will be encoded to UTF-8 and URL-quoted before being placed into the generated URL.

Values replacing *remainder arguments can be passed as strings or tuples of Unicode/string


values. If a tuple is passed as a *remainder replacement value, its values are URL-quoted
and encoded to UTF-8. The resulting strings are joined with slashes and rendered into the
URL. If a string is passed as a *remainder replacement value, it is tacked on to the URL
after being URL-quoted-except-for-embedded-slashes.

If _query is provided, it will be used to compose a query string that will be tacked on
to the end of the URL. The value of _query may be a sequence of two-tuples or a data
structure with an .items() method that returns a sequence of two-tuples (presumably a
dictionary). This data structure will be turned into a query string per the documentation
of the pyramid.url.urlencode() function. This will produce a query string in the
x-www-form-urlencoded format. A non-x-www-form-urlencoded query string
may be used by passing a string value as _query in which case it will be URL-quoted (e.g.
query=”foo bar” will become ”foo%20bar”). However, the result will not need to be in k=v

0.4. API Documentation 849


The Pyramid Web Framework, Version 1.9.4

form as required by x-www-form-urlencoded. After the query data is turned into a query
string, a leading ? is prepended, and the resulting string is appended to the generated URL.

Python data structures that are passed as _query which are sequences or dictionaries
are turned into a string under the same rules as when run through urllib.urlencode()
with the doseq argument equal to True. This means that sequences can be passed as values,
and a k=v pair will be placed into the query string for each value.

If a keyword argument _anchor is present, its string representation will be quoted per RFC
3986#section-3.5 and used as a named anchor in the generated URL (e.g. if _anchor is
passed as foo and the route URL is http://example.com/route/url, the resulting
generated URL will be http://example.com/route/url#foo).

If _anchor is passed as a string, it should be UTF-8 encoded. If _anchor is passed


as a Unicode object, it will be converted to UTF-8 before being appended to the URL.

If both _anchor and _query are specified, the anchor element will always follow the query
element, e.g. http://example.com?foo=1#bar.

If any of the keyword arguments _scheme, _host, or _port is passed and is non-None,
the provided value will replace the named portion in the generated URL. For example, if you
pass _host='foo.com', and the URL that would have been generated without the host
replacement is http://example.com/a, the result will be http://foo.com/a.

Note that if _scheme is passed as https, and _port is not passed, the _port value is
assumed to have been passed as 443. Likewise, if _scheme is passed as http and _port
is not passed, the _port value is assumed to have been passed as 80. To avoid this behavior,
always explicitly pass _port whenever you pass _scheme.

If a keyword _app_url is present, it will be used as the protocol/hostname/port/leading path


prefix of the generated URL. For example, using an _app_url of http://example.
com:8080/foo would cause the URL http://example.com:8080/foo/fleeb/
flub to be returned from this function if the expansion of the route pattern associated with
the route_name expanded to /fleeb/flub. If _app_url is not specified, the result of
request.application_url will be used as the prefix (the default).

If both _app_url and any of _scheme, _host, or _port are passed, _app_url takes
precedence and any values passed for _scheme, _host, and _port will be ignored.

850 Contents
The Pyramid Web Framework, Version 1.9.4

This function raises a KeyError if the URL cannot be generated due to missing replacement
names. Extra replacement names are ignored.

If the route object which matches the route_name argument has a pregenerator, the
*elements and **kw arguments passed to this function might be augmented or changed.

Changed in version 1.5: Allow the _query option to be a string to enable alternative encod-
ings.

The _anchor option will be escaped instead of using its raw string representation.

Changed in version 1.9: If _query or _anchor are falsey (such as None or an empty string)
they will not be included in the generated url.

route_path(route_name, *elements, **kw)


Generates a path (aka a ’relative URL’, a URL minus the host, scheme, and port) for a named
Pyramid route configuration.

This function accepts the same argument as pyramid.request.Request.


route_url() and performs the same duty. It just omits the host, port, and scheme
information in the return value; only the script_name, path, query parameters, and anchor
data are present in the returned string.

For example, if you’ve defined a route named ’foobar’ with the path /{foo}/{bar}, this
call to route_path:

request.route_path('foobar', foo='1', bar='2')

Will return the string /1/2.

Calling request.route_path('route') is the same as calling request.


route_url('route', _app_url=request.script_name). pyramid.
request.Request.route_path() is, in fact, implemented in terms of pyramid.
request.Request.route_url() in just this way. As a result, any _app_url passed
within the **kw values to route_path will be ignored.

0.4. API Documentation 851


The Pyramid Web Framework, Version 1.9.4

current_route_url(*elements, **kw)
Generates a fully qualified URL for a named Pyramid route configuration based on the ’current
route’.

This function supplements pyramid.request.Request.route_url(). It presents


an easy way to generate a URL for the ’current route’ (defined as the route which matched
when the request was generated).

The arguments to this method have the same meaning as those with the same names passed
to pyramid.request.Request.route_url(). It also understands an extra argument
which route_url does not named _route_name.

The route name used to generate a URL is taken from either the _route_name key-
word argument or the name of the route which is currently associated with the request if
_route_name was not passed. Keys and values from the current request matchdict are
combined with the kw arguments to form a set of defaults named newkw. Then request.
route_url(route_name, *elements, **newkw) is called, returning a URL.

Examples follow.

If the ’current route’ has the route pattern /foo/{page} and the current url path
is /foo/1 , the matchdict will be {'page':'1'}. The result of request.
current_route_url() in this situation will be /foo/1.

If the ’current route’ has the route pattern /foo/{page} and the current url path
is /foo/1, the matchdict will be {'page':'1'}. The result of request.
current_route_url(page='2') in this situation will be /foo/2.

Usage of the _route_name keyword argument: if our routing table defines routes /
foo/{action} named ’foo’ and /foo/{action}/{page} named fooaction, and
the current url pattern is /foo/view (which has matched the /foo/{action} route),
we may want to use the matchdict args to generate a URL to the fooaction route.
In this scenario, request.current_route_url(_route_name='fooaction',
page='5') Will return string like: /foo/view/5.

current_route_path(*elements, **kw)
Generates a path (aka a ’relative URL’, a URL minus the host, scheme, and port) for the Pyra-
mid route configuration matched by the current request.

This function accepts the same argument as pyramid.request.Request.


current_route_url() and performs the same duty. It just omits the host, port,
and scheme information in the return value; only the script_name, path, query parameters,
and anchor data are present in the returned string.

For example, if the route matched by the current request has the pattern /{foo}/{bar}, this
call to current_route_path:

852 Contents
The Pyramid Web Framework, Version 1.9.4

request.current_route_path(foo='1', bar='2')

Will return the string /1/2.

Calling request.current_route_path('route') is the same as


calling request.current_route_url('route', _app_url=request.
script_name). pyramid.request.Request.current_route_path()
is, in fact, implemented in terms of pyramid.request.Request.
current_route_url() in just this way. As a result, any _app_url passed within the
**kw values to current_route_path will be ignored.

static_url(path, **kw)
Generates a fully qualified URL for a static asset. The asset must live within a location defined
via the pyramid.config.Configurator.add_static_view() configuration dec-
laration (see Serving Static Assets).

Example:

request.static_url('mypackage:static/foo.css') =>

http://example.com/static/foo.css

The path argument points at a file or directory on disk which a URL should be generated for.
The path may be either a relative path (e.g. static/foo.css) or an absolute path (e.g. /
abspath/to/static/foo.css) or a asset specification (e.g. mypackage:static/
foo.css).

The purpose of the **kw argument is the same as the purpose of the pyramid.request.
Request.route_url() **kw argument. See the documentation for that function to un-
derstand the arguments which you can provide to it. However, typically, you don’t need to
pass anything as *kw when generating a static asset URL.

This function raises a ValueError if a static view definition cannot be found which matches
the path specification.

0.4. API Documentation 853


The Pyramid Web Framework, Version 1.9.4

static_path(path, **kw)
Generates a path (aka a ’relative URL’, a URL minus the host, scheme, and port) for a static
resource.

This function accepts the same argument as pyramid.request.Request.


static_url() and performs the same duty. It just omits the host, port, and scheme
information in the return value; only the script_name, path, query parameters, and anchor
data are present in the returned string.

Example:

request.static_path('mypackage:static/foo.css') =>

/static/foo.css

Calling request.static_path(apath) is the same as calling request.


static_url(apath, _app_url=request.script_name). pyramid.
request.Request.static_path() is, in fact, implemented in terms of pyramid.
request.Request.static_url() in just this way. As a result, any _app_url
passed within the **kw values to static_path will be ignored.

resource_url(resource, *elements, **kw)


Generate a string representing the absolute URL of the resource object based on the wsgi.
url_scheme, HTTP_HOST or SERVER_NAME in the request, plus any SCRIPT_NAME.
The overall result of this method is always a UTF-8 encoded string.

Examples:

request.resource_url(resource) =>

http://example.com/

request.resource_url(resource, 'a.html') =>

http://example.com/a.html

request.resource_url(resource, 'a.html', query={'q':'1'}) =>

http://example.com/a.html?q=1
(continues on next page)

854 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)

request.resource_url(resource, 'a.html', anchor='abc') =>

http://example.com/a.html#abc

request.resource_url(resource, app_url='') =>

Any positional arguments passed in as elements must be strings Unicode objects, or integer
objects. These will be joined by slashes and appended to the generated resource URL. Each
of the elements passed in is URL-quoted before being appended; if any element is Unicode, it
will converted to a UTF-8 bytestring before being URL-quoted. If any element is an integer, it
will be converted to its string representation before being URL-quoted.

if no elements arguments are specified, the resource URL will end with a trailing
slash. If any elements are used, the generated URL will not end in a trailing slash.

If query is provided, it will be used to compose a query string that will be tacked on
to the end of the URL. The value of query may be a sequence of two-tuples or a data
structure with an .items() method that returns a sequence of two-tuples (presumably a
dictionary). This data structure will be turned into a query string per the documentation
of the pyramid.url.urlencode() function. This will produce a query string in the
x-www-form-urlencoded format. A non-x-www-form-urlencoded query string
may be used by passing a string value as query in which case it will be URL-quoted (e.g.
query=”foo bar” will become ”foo%20bar”). However, the result will not need to be in k=v
form as required by x-www-form-urlencoded. After the query data is turned into a query
string, a leading ? is prepended, and the resulting string is appended to the generated URL.

Python data structures that are passed as query which are sequences or dictionaries are
turned into a string under the same rules as when run through urllib.urlencode() with
the doseq argument equal to True. This means that sequences can be passed as values, and
a k=v pair will be placed into the query string for each value.

If a keyword argument anchor is present, its string representation will be used as a named
anchor in the generated URL (e.g. if anchor is passed as foo and the resource URL is

0.4. API Documentation 855


The Pyramid Web Framework, Version 1.9.4

http://example.com/resource/url, the resulting generated URL will be http:/


/example.com/resource/url#foo).

If anchor is passed as a string, it should be UTF-8 encoded. If anchor is passed as


a Unicode object, it will be converted to UTF-8 before being appended to the URL.

If both anchor and query are specified, the anchor element will always follow the query
element, e.g. http://example.com?foo=1#bar.

If any of the keyword arguments scheme, host, or port is passed and is non-None, the
provided value will replace the named portion in the generated URL. For example, if you pass
host='foo.com', and the URL that would have been generated without the host replace-
ment is http://example.com/a, the result will be http://foo.com/a.

If scheme is passed as https, and an explicit port is not passed, the port value is assumed
to have been passed as 443. Likewise, if scheme is passed as http and port is not passed,
the port value is assumed to have been passed as 80. To avoid this behavior, always explicitly
pass port whenever you pass scheme.

If a keyword argument app_url is passed and is not None, it should be a string that will
be used as the port/hostname/initial path portion of the generated URL instead of the default
request application URL. For example, if app_url='http://foo', then the resulting url
of a resource that has a path of /baz/bar will be http://foo/baz/bar. If you want
to generate completely relative URLs with no leading scheme, host, port, or initial path, you
can pass app_url=''. Passing app_url='' when the resource path is /baz/bar will
return /baz/bar.

If app_url is passed and any of scheme, port, or host are also passed, app_url will
take precedence and the values passed for scheme, host, and/or port will be ignored.

If the resource passed in has a __resource_url__ method, it will be used to gener-


ate the URL (scheme, host, port, path) for the base resource which is operated upon by this
function.

See also:

See also Overriding Resource URL Generation.

If route_name is passed, this function will delegate its URL production to the route_url
function. Calling resource_url(someresource, 'element1', 'element2',
query={'a':1}, route_name='blogentry') is roughly equivalent to doing:

856 Contents
The Pyramid Web Framework, Version 1.9.4

traversal_path = request.resource_path(someobject)
url = request.route_url(
'blogentry',
'element1',
'element2',
_query={'a':'1'},
traverse=traversal_path,
)

It is only sensible to pass route_name if the route being named has a *remainder stararg
value such as *traverse. The remainder value will be ignored in the output otherwise.

By default, the resource path value will be passed as the name traverse when route_url
is called. You can influence this by passing a different route_remainder_name value if
the route has a different *stararg value at its end. For example if the route pattern you want
to replace has a *subpath stararg ala /foo*subpath:

request.resource_url(
resource,
route_name='myroute',
route_remainder_name='subpath'
)

If route_name is passed, it is also permissible to pass route_kw,


which will passed as additional keyword arguments to route_url. Say-
ing resource_url(someresource, 'element1', 'element2',
route_name='blogentry', route_kw={'id':'4'}, _query={'a':'1'})
is roughly equivalent to:

traversal_path = request.resource_path_tuple(someobject)
kw = {'id':'4', '_query':{'a':'1'}, 'traverse':traversal_
,→path}

url = request.route_url(
'blogentry',
'element1',
'element2',
**kw,
)

If route_kw or route_remainder_name is passed, but route_name is not passed,


both route_kw and route_remainder_name will be ignored. If route_name is

0.4. API Documentation 857


The Pyramid Web Framework, Version 1.9.4

passed, the __resource_url__ method of the resource passed is ignored unconditionally.


This feature is incompatible with resources which generate their own URLs.

If the resource used is the result of a traversal, it must be location-aware. The resource
can also be the context of a URL dispatch; contexts found this way do not need to be location-
aware.

If a ’virtual root path’ is present in the request environment (the value of the WSGI
environ key HTTP_X_VHM_ROOT), and the resource was obtained via traversal, the URL
path will not include the virtual root prefix (it will be stripped off the left hand side of the
generated URL).

For backwards compatibility purposes, this method is also aliased as the model_url
method of request.

Changed in version 1.3: Added the app_url keyword argument.

Changed in version 1.5: Allow the query option to be a string to enable alternative encodings.

The anchor option will be escaped instead of using its raw string representation.

Added the route_name, route_kw, and route_remainder_name keyword argu-


ments.

Changed in version 1.9: If query or anchor are falsey (such as None or an empty string)
they will not be included in the generated url.

resource_path(resource, *elements, **kw)


Generates a path (aka a ’relative URL’, a URL minus the host, scheme, and port) for a resource.

This function accepts the same argument as pyramid.request.Request.


resource_url() and performs the same duty. It just omits the host, port, and
scheme information in the return value; only the script_name, path, query parameters, and
anchor data are present in the returned string.

858 Contents
The Pyramid Web Framework, Version 1.9.4

Calling request.resource_path(resource) is the same as calling


request.resource_path(resource, app_url=request.script_name).
pyramid.request.Request.resource_path() is, in fact, implemented in terms
of pyramid.request.Request.resource_url() in just this way. As a result,
any app_url passed within the **kw values to route_path will be ignored. scheme,
host, and port are also ignored.

json_body
This property will return the JSON-decoded variant of the request body. If the request body
is not well-formed JSON, or there is no body associated with this request, this property will
raise an exception.

See also:

See also Dealing with a JSON-Encoded Request Body.

set_property(callable, name=None, reify=False)


Add a callable or a property descriptor to the request instance.

Properties, unlike attributes, are lazily evaluated by executing an underlying callable when
accessed. They can be useful for adding features to an object without any cost if those features
go unused.

A property may also be reified via the pyramid.decorator.reify decorator by set-


ting reify=True, allowing the result of the evaluation to be cached. Thus the value of the
property is only computed once for the lifetime of the object.

callable can either be a callable that accepts the request as its single positional parameter,
or it can be a property descriptor.

If the callable is a property descriptor a ValueError will be raised if name is None or


reify is True.

If name is None, the name of the property will be computed from the name of the callable.

0.4. API Documentation 859


The Pyramid Web Framework, Version 1.9.4

1 def _connect(request):
2 conn = request.registry.dbsession()
3 def cleanup(request):
4 # since version 1.5, request.exception is no
5 # longer eagerly cleared
6 if request.exception is not None:
7 conn.rollback()
8 else:
9 conn.commit()
10 conn.close()
11 request.add_finished_callback(cleanup)
12 return conn
13

14 @subscriber(NewRequest)
15 def new_request(event):
16 request = event.request
17 request.set_property(_connect, 'db', reify=True)

The subscriber doesn’t actually connect to the database, it just provides the API which, when
accessed via request.db, will create the connection. Thanks to reify, only one connection
is made per-request even if request.db is accessed many times.

This pattern provides a way to augment the request object without having to subclass it,
which can be useful for extension authors.

New in version 1.3.

localizer
A localizer which will use the current locale name to translate values.

New in version 1.5.

locale_name
The locale name of the current request as computed by the locale negotiator.

New in version 1.5.

GET
Return a MultiDict containing all the variables from the QUERY_STRING.

860 Contents
The Pyramid Web Framework, Version 1.9.4

POST
Return a MultiDict containing all the variables from a form request. Returns an empty dict-like
object for non-form requests.

Form requests are typically POST requests, however any other requests with an appropriate
Content-Type are also supported.

ResponseClass
alias of pyramid.response.Response

accept
Property representing the Accept header.

(RFC 7231, section 5.3.2)

The header value in the request environ is parsed and a new object representing the header is
created every time we get the value of the property. (set and del change the header value in the
request environ, and do not involve parsing.)

accept_charset
Property representing the Accept-Charset header.

(RFC 7231, section 5.3.3)

The header value in the request environ is parsed and a new object representing the header is
created every time we get the value of the property. (set and del change the header value in the
request environ, and do not involve parsing.)

accept_encoding
Property representing the Accept-Encoding header.

(RFC 7231, section 5.3.4)

The header value in the request environ is parsed and a new object representing the header is
created every time we get the value of the property. (set and del change the header value in the
request environ, and do not involve parsing.)

accept_language
Property representing the Accept-Language header.

(RFC 7231, section 5.3.5)

The header value in the request environ is parsed and a new object representing the header is
created every time we get the value of the property. (set and del change the header value in the
request environ, and do not involve parsing.)

0.4. API Documentation 861


The Pyramid Web Framework, Version 1.9.4

application_url
The URL including SCRIPT_NAME (no PATH_INFO or query string)

as_bytes(skip_body=False)
Return HTTP bytes representing this request. If skip_body is True, exclude the body. If
skip_body is an integer larger than one, skip body only if its length is bigger than that number.

authorization
Gets and sets the Authorization header (HTTP spec section 14.8). Converts it using
parse_auth and serialize_auth.

classmethod blank(path, environ=None, base_url=None, headers=None,


POST=None, **kw)
Create a blank request environ (and Request wrapper) with the given path (path should be
urlencoded), and any keys from environ.

The path will become path_info, with any query string split off and used.

All necessary keys will be added to the environ, but the values you pass in will take precedence.
If you pass in base_url then wsgi.url_scheme, HTTP_HOST, and SCRIPT_NAME will be
filled in from that value.

Any extra keyword will be passed to __init__.

body
Return the content of the request body.

body_file
Input stream of the request (wsgi.input). Setting this property resets the content_length and
seekable flag (unlike setting req.body_file_raw).

body_file_raw
Gets and sets the wsgi.input key in the environment.

body_file_seekable
Get the body of the request (wsgi.input) as a seekable file-like object. Middleware and routing
applications should use this attribute over .body_file.

If you access this value, CONTENT_LENGTH will also be updated.

cache_control
Get/set/modify the Cache-Control header (HTTP spec section 14.9)

862 Contents
The Pyramid Web Framework, Version 1.9.4

call_application(application, catch_exc_info=False)
Call the given WSGI application, returning (status_string, headerlist,
app_iter)

Be sure to call app_iter.close() if it’s there.

If catch_exc_info is true, then returns (status_string, headerlist, app_iter,


exc_info), where the fourth item may be None, but won’t be if there was an exception. If
you don’t do this and there was an exception, the exception will be raised directly.

client_addr
The effective client IP address as a string. If the HTTP_X_FORWARDED_FOR header exists in
the WSGI environ, this attribute returns the client IP address present in that header (e.g. if the
header value is 192.168.1.1, 192.168.1.2, the value will be 192.168.1.1). If no
HTTP_X_FORWARDED_FOR header is present in the environ at all, this attribute will return
the value of the REMOTE_ADDR header. If the REMOTE_ADDR header is unset, this attribute
will return the value None.

It is possible for user agents to put someone else’s IP or just any string in
HTTP_X_FORWARDED_FOR as it is a normal HTTP header. Forward proxies can
also provide incorrect values (private IP addresses etc). You cannot ”blindly” trust
the result of this method to provide you with valid data unless you’re certain that
HTTP_X_FORWARDED_FOR has the correct values. The WSGI server must be behind
a trusted proxy for this to be true.

content_length
Gets and sets the Content-Length header (HTTP spec section 14.13). Converts it using
int.

content_type
Return the content type, but leaving off any parameters (like charset, but also things like the
type in application/atom+xml; type=entry)

If you set this property, you can include parameters, or if you don’t include any parameters in
the value then existing parameters will be preserved.

cookies
Return a dictionary of cookies as found in the request.

0.4. API Documentation 863


The Pyramid Web Framework, Version 1.9.4

copy()
Copy the request and environment object.

This only does a shallow copy, except of wsgi.input

copy_body()
Copies the body, in cases where it might be shared with another request object and that is not
desired.

This copies the body either into a BytesIO object (through setting req.body) or a temporary
file.

copy_get()
Copies the request and environment object, but turning this request into a GET along the way.
If this was a POST request (or any other verb) then it becomes GET, and the request body is
thrown away.

date
Gets and sets the Date header (HTTP spec section 14.8). Converts it using HTTP date.

domain
Returns the domain portion of the host value. Equivalent to:

domain = request.host
if ':' in domain and domain[-1] != ']': # Check for ]␣
,→because of IPv6

domain = domain.rsplit(':', 1)[0]

This will be equivalent to the domain portion of the HTTP_HOST value in the environment
if it exists, or the SERVER_NAME value in the environment if it doesn’t. For example, if the
environment contains an HTTP_HOST value of foo.example.com:8000, request.
domain will return foo.example.com.

Note that this value cannot be set on the request. To set the host value use webob.request.
Request.host() instead.

classmethod from_bytes(b)
Create a request from HTTP bytes data. If the bytes contain extra data after the request, raise
a ValueError.

864 Contents
The Pyramid Web Framework, Version 1.9.4

classmethod from_file(fp)
Read a request from a file-like object (it must implement .read(size) and .
readline()).

It will read up to the end of the request, not the end of the file (unless the request is a POST or
PUT and has no Content-Length, in that case, the entire file is read).

This reads the request as represented by str(req); it may not read every valid HTTP request
properly.

get_response(application=None, catch_exc_info=False)
Like .call_application(application), except returns a response object with .
status, .headers, and .body attributes.

This will use self.ResponseClass to figure out the class of the response object to return.

If application is not given, this will send the request to self.


make_default_send_app()

headers
All the request headers as a case-insensitive dictionary-like object.

host
Host name provided in HTTP_HOST, with fall-back to SERVER_NAME

host_port
The effective server port number as a string. If the HTTP_HOST header exists in the WSGI
environ, this attribute returns the port number present in that header. If the HTTP_HOST
header exists but contains no explicit port number: if the WSGI url scheme is ”https” , this
attribute returns ”443”, if the WSGI url scheme is ”http”, this attribute returns ”80” . If no
HTTP_HOST header is present in the environ at all, this attribute will return the value of the
SERVER_PORT header (which is guaranteed to be present).

host_url
The URL through the host (no path)

http_version
Gets and sets the SERVER_PROTOCOL key in the environment.

if_match
Gets and sets the If-Match header (HTTP spec section 14.24). Converts it as a Etag.

0.4. API Documentation 865


The Pyramid Web Framework, Version 1.9.4

if_modified_since
Gets and sets the If-Modified-Since header (HTTP spec section 14.25). Converts it
using HTTP date.

if_none_match
Gets and sets the If-None-Match header (HTTP spec section 14.26). Converts it as a Etag.

if_range
Gets and sets the If-Range header (HTTP spec section 14.27). Converts it using IfRange
object.

if_unmodified_since
Gets and sets the If-Unmodified-Since header (HTTP spec section 14.28). Converts it
using HTTP date.

is_body_readable
webob.is_body_readable is a flag that tells us that we can read the input stream even though
CONTENT_LENGTH is missing.

is_body_seekable
Gets and sets the webob.is_body_seekable key in the environment.

is_response(ob)
Return True if the object passed as ob is a valid response object, False otherwise.

is_xhr
Is X-Requested-With header present and equal to XMLHttpRequest?

Note: this isn’t set by every XMLHttpRequest request, it is only set if you are using a Javascript
library that sets it (or you set the header yourself manually). Currently Prototype and jQuery
are known to set this header.

json
Access the body of the request as JSON

json_body
Access the body of the request as JSON

localizer
Convenience property to return a localizer

866 Contents
The Pyramid Web Framework, Version 1.9.4

make_body_seekable()
This forces environ['wsgi.input'] to be seekable. That means that, the content is
copied into a BytesIO or temporary file and flagged as seekable, so that it will not be unneces-
sarily copied again.

After calling this method the .body_file is always seeked to the start of file and .content_length
is not None.

The choice to copy to BytesIO is made from self.request_body_tempfile_limit

make_tempfile()
Create a tempfile to store big request body. This API is not stable yet. A ’size’ argument might
be added.

max_forwards
Gets and sets the Max-Forwards header (HTTP spec section 14.31). Converts it using int.

method
Gets and sets the REQUEST_METHOD key in the environment.

params
A dictionary-like object containing both the parameters from the query string and request body.

path
The path of the request, without host or query string

path_info
Gets and sets the PATH_INFO key in the environment.

path_info_peek()
Returns the next segment on PATH_INFO, or None if there is no next segment. Doesn’t modify
the environment.

path_info_pop(pattern=None)
’Pops’ off the next segment of PATH_INFO, pushing it onto SCRIPT_NAME, and returning
the popped segment. Returns None if there is nothing left on PATH_INFO.

Does not return '' when there’s an empty segment (like /path//path); these segments are
just ignored.

Optional pattern argument is a regexp to match the return value before returning. If there
is no match, no changes are made to the request and None is returned.

0.4. API Documentation 867


The Pyramid Web Framework, Version 1.9.4

path_qs
The path of the request, without host but with query string

path_url
The URL including SCRIPT_NAME and PATH_INFO, but not QUERY_STRING

pragma
Gets and sets the Pragma header (HTTP spec section 14.32).

query_string
Gets and sets the QUERY_STRING key in the environment.

range
Gets and sets the Range header (HTTP spec section 14.35). Converts it using Range object.

referer
Gets and sets the Referer header (HTTP spec section 14.36).

referrer
Gets and sets the Referer header (HTTP spec section 14.36).

relative_url(other_url, to_application=False)
Resolve other_url relative to the request URL.

If to_application is True, then resolve it relative to the URL with only SCRIPT_NAME

remote_addr
Gets and sets the REMOTE_ADDR key in the environment.

remote_host
Gets and sets the None header (HTTP spec section 4.1.9).

remote_user
Gets and sets the REMOTE_USER key in the environment.

remove_conditional_headers(remove_encoding=True, remove_range=True, re-


move_match=True, remove_modified=True)
Remove headers that make the request conditional.

These headers can cause the response to be 304 Not Modified, which in some cases you may
not want to be possible.

This does not remove headers like If-Match, which are used for conflict detection.

868 Contents
The Pyramid Web Framework, Version 1.9.4

request_iface = <InterfaceClass pyramid.interfaces.IRequest>

response
This attribute is actually a ”reified” property which returns an instance of the pyramid.
response.Response. class. The response object returned does not exist until this attribute
is accessed. Subsequent accesses will return the same Response object.

The request.response API is used by renderers. A render obtains the response object it
will return from a view that uses that renderer by accessing request.response. Therefore,
it’s possible to use the request.response API to set up a response object with ”the right”
attributes (e.g. by calling request.response.set_cookie()) within a view that uses
a renderer. Mutations to this response object will be preserved in the response sent to the client.

scheme
Gets and sets the wsgi.url_scheme key in the environment.

script_name
Gets and sets the SCRIPT_NAME key in the environment.

send(application=None, catch_exc_info=False)
Like .call_application(application), except returns a response object with .
status, .headers, and .body attributes.

This will use self.ResponseClass to figure out the class of the response object to return.

If application is not given, this will send the request to self.


make_default_send_app()

server_name
Gets and sets the SERVER_NAME key in the environment.

server_port
Gets and sets the SERVER_PORT key in the environment. Converts it using int.

session
Obtain the session object associated with this request. If a session factory has
not been registered during application configuration, a pyramid.exceptions.
ConfigurationError will be raised

text
Get/set the text value of the body

0.4. API Documentation 869


The Pyramid Web Framework, Version 1.9.4

upath_info
Gets and sets the PATH_INFO key in the environment.

url
The full request URL, including QUERY_STRING

url_encoding
Gets and sets the webob.url_encoding key in the environment.

urlargs
Return any positional variables matched in the URL.

Takes values from environ['wsgiorg.routing_args']. Systems like routes set


this value.

urlvars
Return any named variables matched in the URL.

Takes values from environ['wsgiorg.routing_args']. Systems like routes set


this value.

uscript_name
Gets and sets the SCRIPT_NAME key in the environment.

user_agent
Gets and sets the User-Agent header (HTTP spec section 14.43).

For information about the API of a multidict structure (such as that used as request.GET,
request.POST, and request.params), see pyramid.interfaces.IMultiDict.

apply_request_extensions(request)
Apply request extensions (methods and properties) to an instance of pyramid.interfaces.
IRequest. This method is dependent on the request containing a properly initialized registry.

After invoking this method, the request should have the methods and properties that were defined
using pyramid.config.Configurator.add_request_method().

870 Contents
The Pyramid Web Framework, Version 1.9.4

pyramid.response

class Response(body=None, status=None, headerlist=None, app_iter=None, con-


tent_type=None, conditional_response=None, charset=<object object>,
**kw)

accept_ranges
Gets and sets the Accept-Ranges header (HTTP spec section 14.5).

age
Gets and sets the Age header (HTTP spec section 14.6). Converts it using int.

allow
Gets and sets the Allow header (HTTP spec section 14.7). Converts it using list.

app_iter
Returns the app_iter of the response.

If body was set, this will create an app_iter from that body (a single-item list).

app_iter_range(start, stop)
Return a new app_iter built from the response app_iter, that serves up only the given
start:stop range.

body
The body of the response, as a bytes. This will read in the entire app_iter if necessary.

body_file
A file-like object that can be used to write to the body. If you passed in a list app_iter, that
app_iter will be modified by writes.

cache_control
Get/set/modify the Cache-Control header (HTTP spec section 14.9).

charset
Get/set the charset specified in Content-Type.

There is no checking to validate that a content_type actually allows for a charset pa-
rameter.

conditional_response_app(environ, start_response)
Like the normal __call__ interface, but checks conditional headers:

0.4. API Documentation 871


The Pyramid Web Framework, Version 1.9.4

• If-Modified-Since (304 Not Modified; only on GET, HEAD)

• If-None-Match (304 Not Modified; only on GET, HEAD)

• Range (406 Partial Content; only on GET, HEAD)

content_disposition
Gets and sets the Content-Disposition header (HTTP spec section 19.5.1).

content_encoding
Gets and sets the Content-Encoding header (HTTP spec section 14.11).

content_language
Gets and sets the Content-Language header (HTTP spec section 14.12). Converts it using
list.

content_length
Gets and sets the Content-Length header (HTTP spec section 14.17). Converts it using
int.

content_location
Gets and sets the Content-Location header (HTTP spec section 14.14).

content_md5
Gets and sets the Content-MD5 header (HTTP spec section 14.14).

content_range
Gets and sets the Content-Range header (HTTP spec section 14.16). Converts it using
ContentRange object.

content_type
Get/set the Content-Type header. If no Content-Type header is set, this will return
None.

Changed in version 1.7: Setting a new Content-Type will remove all Content-Type
parameters and reset the charset to the default if the Content-Type is text/* or XML
(application/xml or */*+xml).

To preserve all Content-Type parameters, you may use the following code:

resp = Response()
params = resp.content_type_params
resp.content_type = 'application/something'
resp.content_type_params = params

872 Contents
The Pyramid Web Framework, Version 1.9.4

content_type_params
A dictionary of all the parameters in the content type.

(This is not a view, set to change, modifications of the dict will not be applied otherwise.)

copy()
Makes a copy of the response.

date
Gets and sets the Date header (HTTP spec section 14.18). Converts it using HTTP date.

delete_cookie(name, path=’/’, domain=None)


Delete a cookie from the client. Note that path and domain must match how the cookie was
originally set.

This sets the cookie to the empty string, and max_age=0 so that it should expire immediately.

encode_content(encoding=’gzip’, lazy=False)
Encode the content with the given encoding (only gzip and identity are supported).

etag
Gets and sets the ETag header (HTTP spec section 14.19). Converts it using Entity tag.

expires
Gets and sets the Expires header (HTTP spec section 14.21). Converts it using HTTP date.

classmethod from_file(fp)
Reads a response from a file-like object (it must implement .read(size) and .
readline()).

It will read up to the end of the response, not the end of the file.

This reads the response as represented by str(resp); it may not read every valid HTTP
response properly. Responses must have a Content-Length.

has_body
Determine if the the response has a body. In contrast to simply accessing body, this method
will not read the underlying app_iter.

headerlist
The list of response headers.

0.4. API Documentation 873


The Pyramid Web Framework, Version 1.9.4

headers
The headers in a dictionary-like object.

json
Set/get the body of the response as JSON.

This will automatically decode() the body as UTF-8 on get, and encode() the
json.dumps() as UTF-8 before assigning to body.

json_body
Set/get the body of the response as JSON.

This will automatically decode() the body as UTF-8 on get, and encode() the
json.dumps() as UTF-8 before assigning to body.

last_modified
Gets and sets the Last-Modified header (HTTP spec section 14.29). Converts it using
HTTP date.

location
Gets and sets the Location header (HTTP spec section 14.30).

md5_etag(body=None, set_content_md5=False)
Generate an etag for the response object using an MD5 hash of the body (the body parameter,
or self.body if not given).

Sets self.etag.

If set_content_md5 is True, sets self.content_md5 as well.

merge_cookies(resp)
Merge the cookies that were set on this response with the given resp object (which can be
any WSGI application).

If the resp is a webob.Response object, then the other object will be modified in-place.

pragma
Gets and sets the Pragma header (HTTP spec section 14.32).

874 Contents
The Pyramid Web Framework, Version 1.9.4

retry_after
Gets and sets the Retry-After header (HTTP spec section 14.37). Converts it using HTTP
date or delta seconds.

server
Gets and sets the Server header (HTTP spec section 14.38).

set_cookie(name, value=”, max_age=None, path=’/’, domain=None, secure=False,


httponly=False, comment=None, expires=None, overwrite=False, same-
site=None)
Set (add) a cookie for the response.

Arguments are:

name

The cookie name.

value

The cookie value, which should be a string or None. If value is None, it’s equiva-
lent to calling the webob.response.Response.unset_cookie() method
for this cookie key (it effectively deletes the cookie on the client).

max_age

An integer representing a number of seconds, datetime.timedelta, or None.


This value is used as the Max-Age of the generated cookie. If expires is not
passed and this value is not None, the max_age value will also influence the
Expires value of the cookie (Expires will be set to now + max_age). If this
value is None, the cookie will not have a Max-Age value (unless expires is set).
If both max_age and expires are set, this value takes precedence.

path

A string representing the cookie Path value. It defaults to /.

domain

A string representing the cookie Domain, or None. If domain is None, no Domain


value will be sent in the cookie.

secure

0.4. API Documentation 875


The Pyramid Web Framework, Version 1.9.4

A boolean. If it’s True, the secure flag will be sent in the cookie, if it’s False,
the secure flag will not be sent in the cookie.

httponly

A boolean. If it’s True, the HttpOnly flag will be sent in the cookie, if it’s False,
the HttpOnly flag will not be sent in the cookie.

samesite

A string representing the SameSite attribute of the cookie or None. If samesite is


None no SameSite value will be sent in the cookie. Should only be "Strict"
or "Lax".

comment

A string representing the cookie Comment value, or None. If comment is None,


no Comment value will be sent in the cookie.

expires

A datetime.timedelta object representing an amount of time, datetime.


datetime or None. A non-None value is used to generate the Expires value of
the generated cookie. If max_age is not passed, but this value is not None, it will
influence the Max-Age header. If this value is None, the Expires cookie value
will be unset (unless max_age is set). If max_age is set, it will be used to generate
the expires and this value is ignored.

If a datetime.datetime is provided it has to either be timezone aware or be


based on UTC. datetime.datetime objects that are local time are not supported.
Timezone aware datetime.datetime objects are converted to UTC.

This argument will be removed in future versions of WebOb (version 1.9).

overwrite

If this key is True, before setting the cookie, unset any existing cookie.

status
The status string.

status_code
The status as an integer.

876 Contents
The Pyramid Web Framework, Version 1.9.4

status_int
The status as an integer.

text
Get/set the text value of the body using the charset of the Content-Type or the
default_body_encoding.

ubody
Deprecated alias for .text

unicode_body
Deprecated alias for .text

unset_cookie(name, strict=True)
Unset a cookie with the given name (remove it from the response).

vary
Gets and sets the Vary header (HTTP spec section 14.44). Converts it using list.

www_authenticate
Gets and sets the WWW-Authenticate header (HTTP spec section 14.47). Converts it using
parse_auth and serialize_auth.

class FileResponse(path, request=None, cache_max_age=None, content_type=None, con-


tent_encoding=None)
A Response object that can be used to serve a static file from disk simply.

path is a file path on disk.

request must be a Pyramid request object. Note that a request must be passed if the response is
meant to attempt to use the wsgi.file_wrapper feature of the web server that you’re using to
serve your Pyramid application.

cache_max_age is the number of seconds that should be used to HTTP cache this response.

content_type is the content_type of the response.

content_encoding is the content_encoding of the response. It’s generally safe to leave this
set to None if you’re serving a binary file. This argument will be ignored if you also leave
content-type as None.

class FileIter(file, block_size=262144)


A fixed-block-size iterator for use as a WSGI app_iter.

file is a Python file pointer (or at least an object with a read method that takes a size hint).

block_size is an optional block size for iteration.

0.4. API Documentation 877


The Pyramid Web Framework, Version 1.9.4

Functions

response_adapter(*types_or_ifaces, **kwargs)
Decorator activated via a scan which treats the function being decorated as a response adapter for
the set of types or interfaces passed as *types_or_ifaces to the decorator constructor.

For example, if you scan the following response adapter:

from pyramid.response import Response


from pyramid.response import response_adapter

@response_adapter(int)
def myadapter(i):
return Response(status=i)

You can then return an integer from your view callables, and it will be converted into a response
with the integer as the status code.

More than one type or interface can be passed as a constructor argument. The decorated response
adapter will be called for each type or interface.

import json

from pyramid.response import Response


from pyramid.response import response_adapter

@response_adapter(dict, list)
def myadapter(ob):
return Response(json.dumps(ob))

This method will have no effect until a scan is performed agains the package or module which
contains it, ala:

from pyramid.config import Configurator


config = Configurator()
config.scan('somepackage_containing_adapters')

Two additional keyword arguments which will be passed to the venusian attach function are
_depth and _category.

878 Contents
The Pyramid Web Framework, Version 1.9.4

_depth is provided for people who wish to reuse this class from another decorator. The default
value is 0 and should be specified relative to the response_adapter invocation. It will be
passed in to the venusian attach function as the depth of the callstack when Venusian checks if
the decorator is being used in a class or module context. It’s not often used, but it can be useful in
this circumstance.
_category sets the decorator category name. It can be useful in combination with the category
argument of scan to control which views should be processed.
See the venusian.attach() function in Venusian for more information about the _depth and
_category arguments.
Changed in version 1.9.1: Added the _depth and _category arguments.

pyramid.scaffolds

class Template(name)
Inherit from this base class and override methods to use the Pyramid scaffolding system.
post(command, output_dir, vars)
Called after template is applied.
pre(command, output_dir, vars)
Called before template is applied.
render_template(content, vars, filename=None)
Return a bytestring representing a templated file based on the input (content) and the variable
names defined (vars). filename is used for exception reporting.
template_dir()
Return the template directory of the scaffold. By default, it returns the value of
os.path.join(self.module_dir(), self._template_dir) (self.
module_dir() returns the module in which your subclass has been defined). If self.
_template_dir is a tuple this method just returns the value instead of trying to construct
a path. If _template_dir is a tuple, it should be a 2-element tuple: (package_name,
package_relative_path).
class PyramidTemplate(name)
A class that can be used as a base class for Pyramid scaffolding templates.
post(command, output_dir, vars)
Overrides pyramid.scaffolds.template.Template.post(), to print ”Welcome
to Pyramid. Sorry for the convenience.” after a successful scaffolding rendering.
pre(command, output_dir, vars)
Overrides pyramid.scaffolds.template.Template.pre(), adding several vari-
ables to the default variables list (including random_string, and package_logger).
It also prevents common misnamings (such as naming a package ”site” or naming a package
logger ”root”.

0.4. API Documentation 879


The Pyramid Web Framework, Version 1.9.4

pyramid.scripting

get_root(app, request=None)
Return a tuple composed of (root, closer) when provided a router instance as the app ar-
gument. The root returned is the application root object. The closer returned is a callable
(accepting no arguments) that should be called when your scripting application is finished using the
root.

request is passed to the Pyramid application root factory to compute the root. If request
is None, a default will be constructed using the registry’s Request Factory via the pyramid.
interfaces.IRequestFactory.blank() method.

prepare(request=None, registry=None)
This function pushes data onto the Pyramid threadlocal stack (request and registry), making those
objects ’current’. It returns a dictionary useful for bootstrapping a Pyramid application in a scripting
environment.

request is passed to the Pyramid application root factory to compute the root. If request
is None, a default will be constructed using the registry’s Request Factory via the pyramid.
interfaces.IRequestFactory.blank() method.

If registry is not supplied, the last registry loaded from pyramid.config.


global_registries will be used. If you have loaded more than one Pyramid application
in the current process, you may not want to use the last registry loaded, thus you can search the
global_registries and supply the appropriate one based on your own criteria.

The function returns a dictionary composed of root, closer, registry, request and
root_factory. The root returned is the application’s root resource object. The closer re-
turned is a callable (accepting no arguments) that should be called when your scripting application
is finished using the root. registry is the resolved registry object. request is the request object
passed or the constructed request if no request is passed. root_factory is the root factory used
to construct the root.

This function may be used as a context manager to call the closer automatically:

registry = config.registry
with prepare(registry) as env:
request = env['request']
# ...

Changed in version 1.8: Added the ability to use the return value as a context manager.

880 Contents
The Pyramid Web Framework, Version 1.9.4

pyramid.security

Authentication API Functions

authenticated_userid(request)
A function that returns the value of the property pyramid.request.Request.
authenticated_userid.

Deprecated since version 1.5: Use pyramid.request.Request.


authenticated_userid instead.

unauthenticated_userid(request)
A function that returns the value of the property pyramid.request.Request.
unauthenticated_userid.

Deprecated since version 1.5: Use pyramid.request.Request.


unauthenticated_userid instead.

effective_principals(request)
A function that returns the value of the property pyramid.request.Request.
effective_principals.

Deprecated since version 1.5: Use pyramid.request.Request.


effective_principals instead.

forget(request)
Return a sequence of header tuples (e.g. [('Set-Cookie', 'foo=abc')]) suitable for ’for-
getting’ the set of credentials possessed by the currently authenticated user. A common usage might
look like so within the body of a view function (response is assumed to be an WebOb -style
response object computed previously by the view code):

from pyramid.security import forget


headers = forget(request)
response.headerlist.extend(headers)
return response

If no authentication policy is in use, this function will always return an empty sequence.

remember(request, userid, **kwargs)


Returns a sequence of header tuples (e.g. [('Set-Cookie', 'foo=abc')]) on this request’s
response. These headers are suitable for ’remembering’ a set of credentials implied by the data
passed as userid and *kw using the current authentication policy. Common usage might look
like so within the body of a view function (response is assumed to be a WebOb -style response
object computed previously by the view code):

0.4. API Documentation 881


The Pyramid Web Framework, Version 1.9.4

from pyramid.security import remember


headers = remember(request, 'chrism', password='123', max_age=
,→'86400')

response = request.response
response.headerlist.extend(headers)
return response

If no authentication policy is in use, this function will always return an empty sequence. If used,
the composition and meaning of **kw must be agreed upon by the calling code and the effective
authentication policy.
Deprecated since version 1.6: Renamed the principal argument to userid to clarify its pur-
pose.

Authorization API Functions

has_permission(permission, context, request)


A function that calls pyramid.request.Request.has_permission() and returns its re-
sult.
Deprecated since version 1.5: Use pyramid.request.Request.has_permission() in-
stead.
Changed in version 1.5a3: If context is None, then attempt to use the context attribute of self; if not
set, then the AttributeError is propagated.
principals_allowed_by_permission(context, permission)
Provided a context (a resource object), and a permission (a string or unicode object), if a
authorization policy is in effect, return a sequence of principal ids that possess the permission in the
context. If no authorization policy is in effect, this will return a sequence with the single value
pyramid.security.Everyone (the special principal identifier representing all principals).

even if an authorization policy is in effect, some (exotic) authorization policies may not
implement the required machinery for this function; those will cause a NotImplementedError
exception to be raised when this function is invoked.

view_execution_permitted(context, request, name=”)


If the view specified by context and name is protected by a permission, check the permission
associated with the view using the effective authentication/authorization policies and the request.
Return a boolean result. If no authorization policy is in effect, or if the view is not protected by a
permission, return True. If no view can view found, an exception will be raised.
Changed in version 1.4a4: An exception is raised if no view is found.

882 Contents
The Pyramid Web Framework, Version 1.9.4

Constants

Everyone
The special principal id named ’Everyone’. This principal id is granted to all requests. Its actual
value is the string ’system.Everyone’.

Authenticated
The special principal id named ’Authenticated’. This principal id is granted to all requests which
contain any other non-Everyone principal id (according to the authentication policy). Its actual value
is the string ’system.Authenticated’.

ALL_PERMISSIONS
An object that can be used as the permission member of an ACE which matches all permissions
unconditionally. For example, an ACE that uses ALL_PERMISSIONS might be composed like so:
('Deny', 'system.Everyone', ALL_PERMISSIONS).

DENY_ALL
A convenience shorthand ACE that defines ('Deny', 'system.Everyone',
ALL_PERMISSIONS). This is often used as the last ACE in an ACL in systems that use
an ”inheriting” security policy, representing the concept ”don’t inherit any other ACEs”.

NO_PERMISSION_REQUIRED
A special permission which indicates that the view should always be executable by entirely anony-
mous users, regardless of the default permission, bypassing any authorization policy that may be in
effect. Its actual value is the string ’__no_permission_required__’.

Return Values

Allow
The ACE ”action” (the first element in an ACE e.g. (Allow, Everyone, 'read') that means
allow access. A sequence of ACEs makes up an ACL. It is a string, and its actual value is ”Allow”.

Deny
The ACE ”action” (the first element in an ACE e.g. (Deny, 'george', 'read') that means
deny access. A sequence of ACEs makes up an ACL. It is a string, and its actual value is ”Deny”.

class Denied
An instance of Denied is returned when a security-related API or other Pyramid code denies an
action unrelated to an ACL check. It evaluates equal to all boolean false types. It has an attribute
named msg describing the circumstances for the deny.

0.4. API Documentation 883


The Pyramid Web Framework, Version 1.9.4

static __new__(cls, s, *args)


Create a new instance.

Parameters

• fmt – A format string explaining the reason for denial.

• args – Arguments are stored and used with the format string to generate the
msg.

msg
A string indicating why the result was generated.

class Allowed
An instance of Allowed is returned when a security-related API or other Pyramid code allows an
action unrelated to an ACL check. It evaluates equal to all boolean true types. It has an attribute
named msg describing the circumstances for the allow.

static __new__(cls, s, *args)


Create a new instance.

Parameters

• fmt – A format string explaining the reason for denial.

• args – Arguments are stored and used with the format string to generate the
msg.

msg
A string indicating why the result was generated.

class ACLDenied
An instance of ACLDenied is a specialization of pyramid.security.Denied that represents
that a security check made explicitly against ACL was denied. It evaluates equal to all boolean
false types. It also has the following attributes: acl, ace, permission, principals, and
context. These attributes indicate the security values involved in the request. Its __str__
method prints a summary of these attributes for debugging purposes. The same summary is available
as the msg attribute.

static __new__(cls, ace, acl, permission, principals, context)


Create a new instance.

Parameters

884 Contents
The Pyramid Web Framework, Version 1.9.4

• ace – The ACE that matched, triggering the result.

• acl – The ACL containing ace.

• permission – The required permission.

• principals – The list of principals provided.

• context – The context providing the lineage searched.

msg
A string indicating why the result was generated.

class ACLAllowed
An instance of ACLAllowed is a specialization of pyramid.security.Allowed that rep-
resents that a security check made explicitly against ACL was allowed. It evaluates equal to all
boolean true types. It also has the following attributes: acl, ace, permission, principals,
and context. These attributes indicate the security values involved in the request. Its __str__
method prints a summary of these attributes for debugging purposes. The same summary is available
as the msg attribute.

static __new__(cls, ace, acl, permission, principals, context)


Create a new instance.

Parameters

• ace – The ACE that matched, triggering the result.

• acl – The ACL containing ace.

• permission – The required permission.

• principals – The list of principals provided.

• context – The context providing the lineage searched.

msg
A string indicating why the result was generated.

pyramid.session

signed_serialize(data, secret)
Serialize any pickleable structure (data) and sign it using the secret (must be a string). Return
the serialization, which includes the signature as its first 40 bytes. The signed_deserialize
method will deserialize such a value.

This function is useful for creating signed cookies. For example:

0.4. API Documentation 885


The Pyramid Web Framework, Version 1.9.4

cookieval = signed_serialize({'a':1}, 'secret')


response.set_cookie('signed_cookie', cookieval)

signed_deserialize(serialized, secret, hmac=<module ’hmac’ from


’/home/docs/checkouts/readthedocs.org/user_builds/pyramid/envs/1.9-
branch/lib/python3.7/hmac.py’>)
Deserialize the value returned from signed_serialize. If the value cannot be deserialized for
any reason, a ValueError exception will be raised.

This function is useful for deserializing a signed cookie value created by signed_serialize.
For example:

cookieval = request.cookies['signed_cookie']
data = signed_deserialize(cookieval, 'secret')

SignedCookieSessionFactory(secret, cookie_name=’session’, max_age=None,


path=’/’, domain=None, secure=False, httponly=False,
set_on_exception=True, timeout=1200, reissue_time=0,
hashalg=’sha512’, salt=’pyramid.session.’, serial-
izer=None)
New in version 1.5.

Configure a session factory which will provide signed cookie-based sessions. The return value of
this function is a session factory, which may be provided as the session_factory argument of
a pyramid.config.Configurator constructor, or used as the session_factory argu-
ment of the pyramid.config.Configurator.set_session_factory() method.

The session factory returned by this function will create sessions which are limited to storing fewer
than 4000 bytes of data (as the payload must fit into a single cookie).

Parameters:

secret A string which is used to sign the cookie. The secret should be at least as long as the block
size of the selected hash algorithm. For sha512 this would mean a 512 bit (64 character)
secret. It should be unique within the set of secret values provided to Pyramid for its various
subsystems (see Admonishment Against Secret-Sharing).

hashalg The HMAC digest algorithm to use for signing. The algorithm must be supported by the
hashlib library. Default: 'sha512'.

886 Contents
The Pyramid Web Framework, Version 1.9.4

salt A namespace to avoid collisions between different uses of a shared secret. Reusing a secret
for different parts of an application is strongly discouraged (see Admonishment Against Secret-
Sharing). Default: 'pyramid.session.'.

cookie_name The name of the cookie used for sessioning. Default: 'session'.

max_age The maximum age of the cookie used for sessioning (in seconds). Default: None
(browser scope).

path The path used for the session cookie. Default: '/'.

domain The domain used for the session cookie. Default: None (no domain).

secure The ’secure’ flag of the session cookie. Default: False.

httponly Hide the cookie from Javascript by setting the ’HttpOnly’ flag of the session cookie.
Default: False.

timeout A number of seconds of inactivity before a session times out. If None then the cookie
never expires. This lifetime only applies to the value within the cookie. Meaning that if the
cookie expires due to a lower max_age, then this setting has no effect. Default: 1200.

reissue_time The number of seconds that must pass before the cookie is automatically reissued
as the result of accessing the session. The duration is measured as the number of seconds since
the last session cookie was issued and ’now’. If this value is 0, a new cookie will be reissued on
every request accessing the session. If None then the cookie’s lifetime will never be extended.

A good rule of thumb: if you want auto-expired cookies based on inactivity: set the timeout
value to 1200 (20 mins) and set the reissue_time value to perhaps a tenth of the
timeout value (120 or 2 mins). It’s nonsensical to set the timeout value lower than the
reissue_time value, as the ticket will never be reissued. However, such a configuration is
not explicitly prevented.

Default: 0.

set_on_exception If True, set a session cookie even if an exception occurs while rendering
a view. Default: True.

serializer An object with two methods: loads and dumps. The loads method should
accept bytes and return a Python object. The dumps method should accept a Python object
and return bytes. A ValueError should be raised for malformed inputs. If a serializer is not
passed, the pyramid.session.PickleSerializer serializer will be used.

0.4. API Documentation 887


The Pyramid Web Framework, Version 1.9.4

UnencryptedCookieSessionFactoryConfig(secret, timeout=1200,
cookie_name=’session’,
cookie_max_age=None,
cookie_path=’/’, cookie_domain=None,
cookie_secure=False,
cookie_httponly=False,
cookie_on_exception=True,
signed_serialize=<function
signed_serialize>,
signed_deserialize=<function
signed_deserialize>)
Deprecated since version 1.5: Use pyramid.session.
SignedCookieSessionFactory() instead. Caveat: Cookies generated using
SignedCookieSessionFactory are not compatible with cookies generated using
UnencryptedCookieSessionFactory, so existing user session data will be destroyed
if you switch to it.

Configure a session factory which will provide unencrypted (but signed) cookie-based ses-
sions. The return value of this function is a session factory, which may be provided as
the session_factory argument of a pyramid.config.Configurator constructor,
or used as the session_factory argument of the pyramid.config.Configurator.
set_session_factory() method.

The session factory returned by this function will create sessions which are limited to storing fewer
than 4000 bytes of data (as the payload must fit into a single cookie).

Parameters:

secret A string which is used to sign the cookie.

timeout A number of seconds of inactivity before a session times out.

cookie_name The name of the cookie used for sessioning.

cookie_max_age The maximum age of the cookie used for sessioning (in seconds). Default:
None (browser scope).

cookie_path The path used for the session cookie.

cookie_domain The domain used for the session cookie. Default: None (no domain).

cookie_secure The ’secure’ flag of the session cookie.

cookie_httponly The ’httpOnly’ flag of the session cookie.

888 Contents
The Pyramid Web Framework, Version 1.9.4

cookie_on_exception If True, set a session cookie even if an exception occurs while ren-
dering a view.

signed_serialize A callable which takes more or less arbitrary Python data structure and
a secret and returns a signed serialization in bytes. Default: signed_serialize (using
pickle).

signed_deserialize A callable which takes a signed and serialized data structure in bytes
and a secret and returns the original data structure if the signature is valid. Default:
signed_deserialize (using pickle).

BaseCookieSessionFactory(serializer, cookie_name=’session’, max_age=None,


path=’/’, domain=None, secure=False, httponly=False,
timeout=1200, reissue_time=0, set_on_exception=True)
New in version 1.5.

Configure a session factory which will provide cookie-based sessions. The return value of this
function is a session factory, which may be provided as the session_factory argument of
a pyramid.config.Configurator constructor, or used as the session_factory argu-
ment of the pyramid.config.Configurator.set_session_factory() method.

The session factory returned by this function will create sessions which are limited to storing fewer
than 4000 bytes of data (as the payload must fit into a single cookie).

Parameters:

serializer An object with two methods: loads and dumps. The loads method should
accept bytes and return a Python object. The dumps method should accept a Python object
and return bytes. A ValueError should be raised for malformed inputs.

cookie_name The name of the cookie used for sessioning. Default: 'session'.

max_age The maximum age of the cookie used for sessioning (in seconds). Default: None
(browser scope).

path The path used for the session cookie. Default: '/'.

domain The domain used for the session cookie. Default: None (no domain).

secure The ’secure’ flag of the session cookie. Default: False.

httponly Hide the cookie from Javascript by setting the ’HttpOnly’ flag of the session cookie.
Default: False.

0.4. API Documentation 889


The Pyramid Web Framework, Version 1.9.4

timeout A number of seconds of inactivity before a session times out. If None then the cookie
never expires. This lifetime only applies to the value within the cookie. Meaning that if the
cookie expires due to a lower max_age, then this setting has no effect. Default: 1200.

reissue_time The number of seconds that must pass before the cookie is automatically reissued
as the result of a request which accesses the session. The duration is measured as the number
of seconds since the last session cookie was issued and ’now’. If this value is 0, a new cookie
will be reissued on every request accessing the session. If None then the cookie’s lifetime will
never be extended.

A good rule of thumb: if you want auto-expired cookies based on inactivity: set the timeout
value to 1200 (20 mins) and set the reissue_time value to perhaps a tenth of the
timeout value (120 or 2 mins). It’s nonsensical to set the timeout value lower than the
reissue_time value, as the ticket will never be reissued. However, such a configuration is
not explicitly prevented.

Default: 0.

set_on_exception If True, set a session cookie even if an exception occurs while rendering
a view. Default: True.

class PickleSerializer(protocol=4)
A serializer that uses the pickle protocol to dump Python data to bytes.

This is the default serializer used by Pyramid.

protocol may be specified to control the version of pickle used. Defaults to pickle.
HIGHEST_PROTOCOL.

pyramid.settings

asbool(s)
Return the boolean value True if the case-lowered value of string input s is a truthy string. If s is
already one of the boolean values True or False, return it.

aslist(value, flatten=True)
Return a list of strings, separating the input based on newlines and, if flatten=True (the default), also
split on spaces within each line.

890 Contents
The Pyramid Web Framework, Version 1.9.4

pyramid.static

class static_view(root_dir, cache_max_age=3600, package_name=None,


use_subpath=False, index=’index.html’)
An instance of this class is a callable which can act as a Pyramid view callable; this view will serve
static files from a directory on disk based on the root_dir you provide to its constructor.

The directory may contain subdirectories (recursively); the static view implementation will descend
into these directories as necessary based on the components of the URL in order to resolve a path
into a response.

You may pass an absolute or relative filesystem path or a asset specification representing the directory
containing static files as the root_dir argument to this class’ constructor.

If the root_dir path is relative, and the package_name argument is None, root_dir will
be considered relative to the directory in which the Python file which calls static resides. If
the package_name name argument is provided, and a relative root_dir is provided, the
root_dir will be considered relative to the Python package specified by package_name (a
dotted path to a Python package).

cache_max_age influences the Expires and Max-Age response headers returned by the view
(default is 3600 seconds or one hour).

use_subpath influences whether request.subpath will be used as PATH_INFO when call-


ing the underlying WSGI application which actually serves the static files. If it is True, the static
application will consider request.subpath as PATH_INFO input. If it is False, the static
application will consider request.environ[PATH_INFO] as PATH_INFO input. By default, this is
False.

If the root_dir is relative to a package, or is a asset specification the Pyramid pyramid.


config.Configurator method can be used to override assets within the named root_dir
package-relative directory. However, if the root_dir is absolute, configuration will not be able to
override the assets it contains.

class ManifestCacheBuster(manifest_spec, reload=False)


An implementation of ICacheBuster which uses a supplied manifest file to map an asset path to
a cache-busted version of the path.

The manifest_spec can be an absolute path or a asset specification pointing to a package-relative


file.

The manifest file is expected to conform to the following simple JSON format:

0.4. API Documentation 891


The Pyramid Web Framework, Version 1.9.4

{
"css/main.css": "css/main-678b7c80.css",
"images/background.png": "images/background-a8169106.png",
}

By default, it is a JSON-serialized dictionary where the keys are the source asset paths used in calls
to static_url(). For example:

>>> request.static_url('myapp:static/css/main.css')
"http://www.example.com/static/css/main-678b7c80.css"

The file format and location can be changed by subclassing and overriding parse_manifest().

If a path is not found in the manifest it will pass through unchanged.

If reload is True then the manifest file will be reloaded when changed. It is not recommended
to leave this enabled in production.

If the manifest file cannot be found on disk it will be treated as an empty mapping unless reload
is False.

New in version 1.6.

static exists(path)
Test whether a path exists. Returns False for broken symbolic links

static getmtime(filename)
Return the last modification time of a file, reported by os.stat().

manifest
The current manifest dictionary.

parse_manifest(content)
Parse the content read from the manifest_path into a dictionary mapping.

Subclasses may override this method to use something other than json.loads to load any
type of file format and return a conforming dictionary.

892 Contents
The Pyramid Web Framework, Version 1.9.4

class QueryStringCacheBuster(param=’x’)
An implementation of ICacheBuster which adds a token for cache busting in the query string
of an asset URL.

The optional param argument determines the name of the parameter added to the query string and
defaults to 'x'.

To use this class, subclass it and provide a tokenize method which accepts request,
pathspec, kw and returns a token.

New in version 1.6.

class QueryStringConstantCacheBuster(token, param=’x’)


An implementation of ICacheBuster which adds an arbitrary token for cache busting in the
query string of an asset URL.

The token parameter is the token string to use for cache busting and will be the same for every
request.

The optional param argument determines the name of the parameter added to the query string and
defaults to 'x'.

New in version 1.6.

pyramid.testing

setUp(registry=None, request=None, hook_zca=True, autocommit=True, settings=None, pack-


age=None)
Set Pyramid registry and request thread locals for the duration of a single unit test.

Use this function in the setUp method of a unittest test case which directly or indirectly uses:

• any method of the pyramid.config.Configurator object returned by this function.

• the pyramid.threadlocal.get_current_registry() or pyramid.


threadlocal.get_current_request() functions.

0.4. API Documentation 893


The Pyramid Web Framework, Version 1.9.4

If you use the get_current_* functions (or call Pyramid code that uses these functions) without
calling setUp, pyramid.threadlocal.get_current_registry() will return a global
application registry, which may cause unit tests to not be isolated with respect to registrations they
perform.

If the registry argument is None, a new empty application registry will be created (an instance
of the pyramid.registry.Registry class). If the registry argument is not None, the
value passed in should be an instance of the pyramid.registry.Registry class or a suitable
testing analogue.

After setUp is finished, the registry returned by the pyramid.threadlocal.


get_current_registry() function will be the passed (or constructed) registry until
pyramid.testing.tearDown() is called (or pyramid.testing.setUp() is called
again) .

If the hook_zca argument is True, setUp will attempt to perform the operation
zope.component.getSiteManager.sethook( pyramid.threadlocal.
get_current_registry), which will cause the Zope Component Architecture global
API (e.g. zope.component.getSiteManager(), zope.component.getAdapter(),
and so on) to use the registry constructed by setUp as the value it returns from zope.
component.getSiteManager(). If the zope.component package cannot be imported,
or if hook_zca is False, the hook will not be set.

If settings is not None, it must be a dictionary representing the values passed to a Configurator
as its settings= argument.

If package is None it will be set to the caller’s package. The package setting in the
pyramid.config.Configurator will affect any relative imports made via pyramid.
config.Configurator.include() or pyramid.config.Configurator.
maybe_dotted().

This function returns an instance of the pyramid.config.Configurator class, which


can be used for further configuration to set up an environment suitable for a unit or integra-
tion test. The registry attribute attached to the Configurator instance represents the ’cur-
rent’ application registry; the same registry will be returned by pyramid.threadlocal.
get_current_registry() during the execution of the test.

tearDown(unhook_zca=True)
Undo the effects of pyramid.testing.setUp(). Use this function in the tearDown method
of a unit test that uses pyramid.testing.setUp() in its setUp method.

If the unhook_zca argument is True (the default), call zope.component.


getSiteManager.reset(). This undoes the action of pyramid.testing.setUp()
when called with the argument hook_zca=True. If zope.component cannot be imported,
unhook_zca is set to False.

894 Contents
The Pyramid Web Framework, Version 1.9.4

testConfig(registry=None, request=None, hook_zca=True, autocommit=True, set-


tings=None)
Returns a context manager for test set up.

This context manager calls pyramid.testing.setUp() when entering and pyramid.


testing.tearDown() when exiting.

All arguments are passed directly to pyramid.testing.setUp(). If the ZCA is hooked, it


will always be un-hooked in tearDown.

This context manager allows you to write test code like this:

1 with testConfig() as config:


2 config.add_route('bar', '/bar/{id}')
3 req = DummyRequest()
4 resp = myview(req)

cleanUp(*arg, **kw)
An alias for pyramid.testing.setUp().

class DummyResource(__name__=None, __parent__=None, __provides__=None, **kw)


A dummy Pyramid resource object.

clone(__name__=<object object>, __parent__=<object object>, **kw)


Create a clone of the resource object. If __name__ or __parent__ arguments are passed,
use these values to override the existing __name__ or __parent__ of the resource. If any
extra keyword args are passed in via the kw argument, use these keywords to add to or override
existing resource keywords (attributes).

items()
Return the items set by __setitem__

keys()
Return the keys set by __setitem__

values()
Return the values set by __setitem__

0.4. API Documentation 895


The Pyramid Web Framework, Version 1.9.4

class DummyRequest(params=None, environ=None, headers=None, path=’/’, cook-


ies=None, post=None, **kw)
A DummyRequest object (incompletely) imitates a request object.

The params, environ, headers, path, and cookies arguments correspond to their WebOb
equivalents.

The post argument, if passed, populates the request’s POST attribute, but not params, in order
to allow testing that the app accepts data for a given view only from POST requests. This argument
also sets self.method to ”POST”.

Extra keyword arguments are assigned as attributes of the request itself.

Note that DummyRequest does not have complete fidelity with a ”real” request. For example, by
default, the DummyRequest GET and POST attributes are of type dict, unlike a normal Request’s
GET and POST, which are of type MultiDict. If your code uses the features of MultiDict, you
should either use a real pyramid.request.Request or adapt your DummyRequest by replac-
ing the attributes with MultiDict instances.

Other similar incompatibilities exist. If you need all the features of a Request, use the pyramid.
request.Request class itself rather than this class while writing tests.

request_iface = <InterfaceClass pyramid.interfaces.IRequest>

class DummyTemplateRenderer(string_response=”)
An instance of this class is returned from pyramid.config.Configurator.
testing_add_renderer(). It has a helper function (assert_) that makes it possible
to make an assertion which compares data passed to the renderer by the view function against
expected key/value pairs.

assert_(**kw)
Accept an arbitrary set of assertion key/value pairs. For each assertion key/value pair assert that
the renderer (eg. pyramid.renderers.render_to_response()) received the key
with a value that equals the asserted value. If the renderer did not receive the key at all, or the
value received by the renderer doesn’t match the assertion value, raise an AssertionError.

896 Contents
The Pyramid Web Framework, Version 1.9.4

pyramid.threadlocal

get_current_request()
Return the currently active request or None if no request is currently active.

This function should be used extremely sparingly, usually only in unit testing code. It’s almost
always usually a mistake to use get_current_request outside a testing context because its
usage makes it possible to write code that can be neither easily tested nor scripted.

get_current_registry()
Return the currently active application registry or the global application registry if no request is
currently active.

This function should be used extremely sparingly, usually only in unit testing code. It’s almost always
usually a mistake to use get_current_registry outside a testing context because its usage
makes it possible to write code that can be neither easily tested nor scripted.

pyramid.traversal

find_interface(resource, class_or_interface)
Return the first resource found in the lineage of resource which, a) if class_or_interface
is a Python class object, is an instance of the class or any subclass of that class or b) if
class_or_interface is a interface, provides the specified interface. Return None if no re-
source providing interface_or_class can be found in the lineage. The resource passed
in must be location-aware.

find_resource(resource, path)
Given a resource object and a string or tuple representing a path (such as the re-
turn value of pyramid.traversal.resource_path() or pyramid.traversal.
resource_path_tuple()), return a resource in this application’s resource tree at the specified
path. The resource passed in must be location-aware. If the path cannot be resolved (if the respective
node in the resource tree does not exist), a KeyError will be raised.

This function is the logical inverse of pyramid.traversal.resource_path() and


pyramid.traversal.resource_path_tuple(); it can resolve any path string or tuple
generated by either of those functions.

Rules for passing a string as the path argument: if the first character in the path string is the / char-
acter, the path is considered absolute and the resource tree traversal will start at the root resource.
If the first character of the path string is not the / character, the path is considered relative and
resource tree traversal will begin at the resource object supplied to the function as the resource

0.4. API Documentation 897


The Pyramid Web Framework, Version 1.9.4

argument. If an empty string is passed as path, the resource passed in will be returned. Re-
source path strings must be escaped in the following manner: each Unicode path segment must be
encoded as UTF-8 and as each path segment must escaped via Python’s urllib.quote. For ex-
ample, /path/to%20the/La%20Pe%C3%B1a (absolute) or to%20the/La%20Pe%C3%B1a
(relative). The pyramid.traversal.resource_path() function generates strings which
follow these rules (albeit only absolute ones).

Rules for passing text (Unicode) as the path argument are the same as those for a string. In partic-
ular, the text may not have any nonascii characters in it.

Rules for passing a tuple as the path argument: if the first element in the path tuple is the empty
string (for example ('', 'a', 'b', 'c'), the path is considered absolute and the resource
tree traversal will start at the resource tree root object. If the first element in the path tuple is not
the empty string (for example ('a', 'b', 'c')), the path is considered relative and resource
tree traversal will begin at the resource object supplied to the function as the resource argument.
If an empty sequence is passed as path, the resource passed in itself will be returned. No
URL-quoting or UTF-8-encoding of individual path segments within the tuple is required (each
segment may be any string or unicode object representing a resource name). Resource path tuples
generated by pyramid.traversal.resource_path_tuple() can always be resolved by
find_resource.

find_root(resource)
Find the root node in the resource tree to which resource belongs. Note that resource should
be location-aware. Note that the root resource is available in the request object by accessing the
request.root attribute.

resource_path(resource, *elements)
Return a string object representing the absolute physical path of the resource object based on its
position in the resource tree, e.g /foo/bar. Any positional arguments passed in as elements
will be appended as path segments to the end of the resource path. For instance, if the resource’s
path is /foo/bar and elements equals ('a', 'b'), the returned string will be /foo/bar/
a/b. The first character in the string will always be the / character (a leading / character in a path
string represents that the path is absolute).

Resource path strings returned will be escaped in the following manner: each unicode path segment
will be encoded as UTF-8 and each path segment will be escaped via Python’s urllib.quote.
For example, /path/to%20the/La%20Pe%C3%B1a.

This function is a logical inverse of pyramid.traversal.find_resource: it can be used


to generate path references that can later be resolved via that function.

The resource passed in must be location-aware.

898 Contents
The Pyramid Web Framework, Version 1.9.4

Each segment in the path string returned will use the __name__ attribute of the resource
it represents within the resource tree. Each of these segments should be a unicode or string object
(as per the contract of location-awareness). However, no conversion or safety checking of resource
names is performed. For instance, if one of the resources in your tree has a __name__ which (by
error) is a dictionary, the pyramid.traversal.resource_path() function will attempt to
append it to a string and it will cause a pyramid.exceptions.URLDecodeError.

The root resource must have a __name__ attribute with a value of either None or the empty
string for paths to be generated properly. If the root resource has a non-null __name__ attribute,
its name will be prepended to the generated path rather than a single leading ’/’ character.

resource_path_tuple(resource, *elements)
Return a tuple representing the absolute physical path of the resource object based on its po-
sition in a resource tree, e.g ('', 'foo', 'bar'). Any positional arguments passed in as
elements will be appended as elements in the tuple representing the resource path. For instance,
if the resource’s path is ('', 'foo', 'bar') and elements equals ('a', 'b'), the returned
tuple will be ('', 'foo', 'bar', 'a', 'b'). The first element of this tuple will always
be the empty string (a leading empty string element in a path tuple represents that the path is abso-
lute).

This function is a logical inverse of pyramid.traversal.find_resource(): it can be used


to generate path references that can later be resolved by that function.

The resource passed in must be location-aware.

Each segment in the path tuple returned will equal the __name__ attribute of the resource
it represents within the resource tree. Each of these segments should be a unicode or string object
(as per the contract of location-awareness). However, no conversion or safety checking of resource
names is performed. For instance, if one of the resources in your tree has a __name__ which (by
error) is a dictionary, that dictionary will be placed in the path tuple; no warning or error will be
given.

The root resource must have a __name__ attribute with a value of either None or the
empty string for path tuples to be generated properly. If the root resource has a non-null __name__
attribute, its name will be the first element in the generated path tuple rather than the empty string.

0.4. API Documentation 899


The Pyramid Web Framework, Version 1.9.4

quote_path_segment(segment, safe=”~!$&’()*+, ;=:@”)

virtual_root(resource, request)
Provided any resource and a request object, return the resource object representing the virtual root
of the current request. Using a virtual root in a traversal -based Pyramid application permits rooting.
For example, the resource at the traversal path /cms will be found at http://example.com/
instead of rooting it at http://example.com/cms/.

If the resource passed in is a context obtained via traversal, and if the HTTP_X_VHM_ROOT
key is in the WSGI environment, the value of this key will be treated as a ’virtual root path’: the
pyramid.traversal.find_resource() API will be used to find the virtual root resource
using this path; if the resource is found, it will be returned. If the HTTP_X_VHM_ROOT key is not
present in the WSGI environment, the physical root of the resource tree will be returned instead.

Virtual roots are not useful at all in applications that use URL dispatch. Contexts obtained via
URL dispatch don’t really support being virtually rooted (each URL dispatch context is both its own
physical and virtual root). However if this API is called with a resource argument which is a
context obtained via URL dispatch, the resource passed in will be returned unconditionally.

traverse(resource, path)
Given a resource object as resource and a string or tuple representing a path as path (such as
the return value of pyramid.traversal.resource_path() or pyramid.traversal.
resource_path_tuple() or the value of request.environ['PATH_INFO']), re-
turn a dictionary with the keys context, root, view_name, subpath, traversed,
virtual_root, and virtual_root_path.

A definition of each value in the returned dictionary:

• context: The context (a resource object) found via traversal or url dispatch. If the path
passed in is the empty string, the value of the resource argument passed to this function is
returned.

• root: The resource object at which traversal begins. If the resource passed in was
found via url dispatch or if the path passed in was relative (non-absolute), the value of the
resource argument passed to this function is returned.

• view_name: The view name found during traversal or url dispatch; if the resource was
found via traversal, this is usually a representation of the path segment which directly follows
the path to the context in the path. The view_name will be a Unicode object or the
empty string. The view_name will be the empty string if there is no element which follows
the context path. An example: if the path passed is /foo/bar, and a resource object is
found at /foo (but not at /foo/bar), the ’view name’ will be u'bar'. If the resource
was found via urldispatch, the view_name will be the name the route found was registered with.

900 Contents
The Pyramid Web Framework, Version 1.9.4

• subpath: For a resource found via traversal, this is a sequence of path segments found
in the path that follow the view_name (if any). Each of these items is a Unicode object.
If no path segments follow the view_name, the subpath will be the empty sequence. An
example: if the path passed is /foo/bar/baz/buz, and a resource object is found at /foo
(but not /foo/bar), the ’view name’ will be u'bar' and the subpath will be [u'baz',
u'buz']. For a resource found via url dispatch, the subpath will be a sequence of values
discerned from *subpath in the route pattern matched or the empty sequence.

• traversed: The sequence of path elements traversed from the root to find the context
object during traversal. Each of these items is a Unicode object. If no path segments were
traversed to find the context object (e.g. if the path provided is the empty string), the
traversed value will be the empty sequence. If the resource is a resource found via url
dispatch, traversed will be None.

• virtual_root: A resource object representing the ’virtual’ root of the resource tree being
traversed during traversal. See Virtual Hosting for a definition of the virtual root object. If
no virtual hosting is in effect, and the path passed in was absolute, the virtual_root
will be the physical root resource object (the object at which traversal begins). If the
resource passed in was found via URL dispatch or if the path passed in was relative,
the virtual_root will always equal the root object (the resource passed in).

• virtual_root_path – If traversal was used to find the resource, this will be the se-
quence of path elements traversed to find the virtual_root resource. Each of these items
is a Unicode object. If no path segments were traversed to find the virtual_root resource
(e.g. if virtual hosting is not in effect), the traversed value will be the empty list. If url
dispatch was used to find the resource, this will be None.

If the path cannot be resolved, a KeyError will be raised.

Rules for passing a string as the path argument: if the first character in the path string is the with the
/ character, the path will considered absolute and the resource tree traversal will start at the root re-
source. If the first character of the path string is not the / character, the path is considered relative and
resource tree traversal will begin at the resource object supplied to the function as the resource
argument. If an empty string is passed as path, the resource passed in will be returned. Re-
source path strings must be escaped in the following manner: each Unicode path segment must
be encoded as UTF-8 and each path segment must escaped via Python’s urllib.quote. For ex-
ample, /path/to%20the/La%20Pe%C3%B1a (absolute) or to%20the/La%20Pe%C3%B1a
(relative). The pyramid.traversal.resource_path() function generates strings which
follow these rules (albeit only absolute ones).

Rules for passing a tuple as the path argument: if the first element in the path tuple is the empty
string (for example ('', 'a', 'b', 'c'), the path is considered absolute and the resource
tree traversal will start at the resource tree root object. If the first element in the path tuple is not the

0.4. API Documentation 901


The Pyramid Web Framework, Version 1.9.4

empty string (for example ('a', 'b', 'c')), the path is considered relative and resource tree
traversal will begin at the resource object supplied to the function as the resource argument. If
an empty sequence is passed as path, the resource passed in itself will be returned. No URL-
quoting or UTF-8-encoding of individual path segments within the tuple is required (each segment
may be any string or unicode object representing a resource name).
Explanation of the conversion of path segment values to Unicode during traversal: Each segment is
URL-unquoted, and decoded into Unicode. Each segment is assumed to be encoded using the UTF-8
encoding (or a subset, such as ASCII); a pyramid.exceptions.URLDecodeError is raised
if a segment cannot be decoded. If a segment name is empty or if it is ., it is ignored. If a segment
name is .., the previous segment is deleted, and the .. is ignored. As a result of this process,
the return values view_name, each element in the subpath, each element in traversed, and
each element in the virtual_root_path will be Unicode as opposed to a string, and will be
URL-decoded.
traversal_path(path)
Variant of pyramid.traversal.traversal_path_info() suitable for decoding paths
that are URL-encoded.
If this function is passed a Unicode object instead of a sequence of bytes as path, that Uni-
code object must directly encodeable to ASCII. For example, u’/foo’ will work but u’/<unprintable
unicode>’ (a Unicode object with characters that cannot be encoded to ascii) will not. A
UnicodeEncodeError will be raised if the Unicode cannot be encoded directly to ASCII.

pyramid.tweens

excview_tween_factory(handler, registry)
A tween factory which produces a tween that catches an exception raised by downstream tweens (or
the main Pyramid request handler) and, if possible, converts it into a Response using an exception
view.
Changed in version 1.9: The request.response will be remain unchanged even if the tween
handles an exception. Previously it was deleted after handling an exception.
Also, request.exception and request.exc_info are only set if the tween handles an
exception and returns a response otherwise they are left at their original values.
MAIN
Constant representing the main Pyramid handling function, for use in under and over arguments
to pyramid.config.Configurator.add_tween().
INGRESS
Constant representing the request ingress, for use in under and over arguments to pyramid.
config.Configurator.add_tween().
EXCVIEW
Constant representing the exception view tween, for use in under and over arguments to
pyramid.config.Configurator.add_tween().

902 Contents
The Pyramid Web Framework, Version 1.9.4

pyramid.url

Utility functions for dealing with URLs in pyramid

resource_url(resource, request, *elements, **kw)


This is a backwards compatibility function. Its result is the same as calling:

request.resource_url(resource, *elements, **kw)

See pyramid.request.Request.resource_url() for more information.

route_url(route_name, request, *elements, **kw)


This is a backwards compatibility function. Its result is the same as calling:

request.route_url(route_name, *elements, **kw)

See pyramid.request.Request.route_url() for more information.

current_route_url(request, *elements, **kw)


This is a backwards compatibility function. Its result is the same as calling:

request.current_route_url(*elements, **kw)

See pyramid.request.Request.current_route_url() for more information.

route_path(route_name, request, *elements, **kw)


This is a backwards compatibility function. Its result is the same as calling:

request.route_path(route_name, *elements, **kw)

See pyramid.request.Request.route_path() for more information.

current_route_path(request, *elements, **kw)


This is a backwards compatibility function. Its result is the same as calling:

request.current_route_path(*elements, **kw)

See pyramid.request.Request.current_route_path() for more information.

static_url(path, request, **kw)


This is a backwards compatibility function. Its result is the same as calling:

0.4. API Documentation 903


The Pyramid Web Framework, Version 1.9.4

request.static_url(path, **kw)

See pyramid.request.Request.static_url() for more information.

static_path(path, request, **kw)


This is a backwards compatibility function. Its result is the same as calling:

request.static_path(path, **kw)

See pyramid.request.Request.static_path() for more information.

urlencode(query, doseq=True, quote_via=<function quote_plus>)


An alternate implementation of Python’s stdlib urllib.parse.urlencode() function which
accepts unicode keys and values within the query dict/sequence; all Unicode keys and values are
first converted to UTF-8 before being used to compose the query string.

The value of query must be a sequence of two-tuples representing key/value pairs or an object
(often a dictionary) with an .items() method that returns a sequence of two-tuples representing
key/value pairs.

For minimal calling convention backwards compatibility, this version of urlencode accepts but ig-
nores a second argument conventionally named doseq. The Python stdlib version behaves differ-
ently when doseq is False and when a sequence is presented as one of the values. This version
always behaves in the doseq=True mode, no matter what the value of the second argument.

Both the key and value are encoded using the quote_via function which by default is using a
similar algorithm to urllib.parse.quote_plus() which converts spaces into ’+’ characters
and ’/’ into ’%2F’.

Changed in version 1.5: In a key/value pair, if the value is None then it will be dropped from the
resulting output.

Changed in version 1.9: Added the quote_via argument to allow alternate quoting algorithms to
be used.

904 Contents
The Pyramid Web Framework, Version 1.9.4

pyramid.view

render_view_to_response(context, request, name=”, secure=True)


Call the view callable configured with a view configuration that matches the view name name regis-
tered against the specified context and request and return a response object. This function will
return None if a corresponding view callable cannot be found (when no view configuration matches
the combination of name / context / and request).
If secure‘ is True, and the view callable found is protected by a permission, the permission will be
checked before calling the view function. If the permission check disallows view execution (based on
the current authorization policy), a pyramid.httpexceptions.HTTPForbidden exception
will be raised. The exception’s args attribute explains why the view access was disallowed.
If secure is False, no permission checking is done.
render_view_to_iterable(context, request, name=”, secure=True)
Call the view callable configured with a view configuration that matches the view name name regis-
tered against the specified context and request and return an iterable object which represents
the body of a response. This function will return None if a corresponding view callable cannot be
found (when no view configuration matches the combination of name / context / and request).
Additionally, this function will raise a ValueError if a view function is found and called but the
view function’s result does not have an app_iter attribute.
You can usually get the bytestring representation of the return value of this function by calling b''.
join(iterable), or just use pyramid.view.render_view() instead.
If secure is True, and the view is protected by a permission, the permission will be checked before
the view function is invoked. If the permission check disallows view execution (based on the current
authentication policy), a pyramid.httpexceptions.HTTPForbidden exception will be
raised; its args attribute explains why the view access was disallowed.
If secure is False, no permission checking is done.
render_view(context, request, name=”, secure=True)
Call the view callable configured with a view configuration that matches the view name name reg-
istered against the specified context and request and unwind the view response’s app_iter
(see View Callable Responses) into a single bytestring. This function will return None if a corre-
sponding view callable cannot be found (when no view configuration matches the combination of
name / context / and request). Additionally, this function will raise a ValueError if a view
function is found and called but the view function’s result does not have an app_iter attribute.
This function will return None if a corresponding view cannot be found.
If secure is True, and the view is protected by a permission, the permission will be checked
before the view is invoked. If the permission check disallows view execution (based on the cur-
rent authorization policy), a pyramid.httpexceptions.HTTPForbidden exception will
be raised; its args attribute explains why the view access was disallowed.
If secure is False, no permission checking is done.

0.4. API Documentation 905


The Pyramid Web Framework, Version 1.9.4

class view_config(**settings)
A function, class or method decorator which allows a developer to create view registrations nearer
to a view callable definition than use imperative configuration to do the same.

For example, this code in a module views.py:

from resources import MyResource

@view_config(name='my_view', context=MyResource, permission=


,→'read',

route_name='site1')
def my_view(context, request):
return 'OK'

Might replace the following call to the pyramid.config.Configurator.add_view()


method:

import views
from resources import MyResource
config.add_view(views.my_view, context=MyResource, name='my_view
,→',

permission='read', route_name='site1')

pyramid.view.view_config supports the following keyword arguments: context,


exception, permission, name, request_type, route_name, request_method,
request_param, containment, xhr, accept, header, path_info,
custom_predicates, decorator, mapper, http_cache, require_csrf,
match_param, check_csrf, physical_path, and view_options.

The meanings of these arguments are the same as the arguments passed to pyramid.config.
Configurator.add_view(). If any argument is left out, its default will be the equivalent
add_view default.

Two additional keyword arguments which will be passed to the venusian attach function are
_depth and _category.

_depth is provided for people who wish to reuse this class from another decorator. The default
value is 0 and should be specified relative to the view_config invocation. It will be passed in to
the venusian attach function as the depth of the callstack when Venusian checks if the decorator is
being used in a class or module context. It’s not often used, but it can be useful in this circumstance.

906 Contents
The Pyramid Web Framework, Version 1.9.4

_category sets the decorator category name. It can be useful in combination with the category
argument of scan to control which views should be processed.

See the venusian.attach() function in Venusian for more information about the _depth and
_category arguments.

See also:

See also Adding View Configuration Using the @view_config Decorator for details about using
pyramid.view.view_config.

view_config will work ONLY on module top level members because of the limitation
of venusian.Scanner.scan.

class view_defaults(**settings)
A class decorator which, when applied to a class, will provide defaults for all view configura-
tions that use the class. This decorator accepts all the arguments accepted by pyramid.view.
view_config(), and each has the same meaning.

See @view_defaults Class Decorator for more information.

class notfound_view_config(**settings)
New in version 1.3.

An analogue of pyramid.view.view_config which registers a Not Found View using


pyramid.config.Configurator.add_notfound_view().

The notfound_view_config constructor accepts most of the same arguments as the construc-
tor of pyramid.view.view_config. It can be used in the same places, and behaves in largely
the same way, except it always registers a not found exception view instead of a ’normal’ view.

Example:

from pyramid.view import notfound_view_config


from pyramid.response import Response

@notfound_view_config()
def notfound(request):
return Response('Not found!', status='404 Not Found')

0.4. API Documentation 907


The Pyramid Web Framework, Version 1.9.4

All arguments except append_slash have the same meaning as pyramid.view.


view_config() and each predicate argument restricts the set of circumstances under which this
notfound view will be invoked.

If append_slash is True, when the Not Found View is invoked, and the current path info does
not end in a slash, the notfound logic will attempt to find a route that matches the request’s path info
suffixed with a slash. If such a route exists, Pyramid will issue a redirect to the URL implied by the
route; if it does not, Pyramid will return the result of the view callable provided as view, as normal.

If the argument provided as append_slash is not a boolean but instead implements IResponse,
the append_slash logic will behave as if append_slash=True was passed, but the provided class
will be used as the response class instead of the default HTTPFound response class when a redirect
is performed. For example:

from pyramid.httpexceptions import (


HTTPMovedPermanently,
HTTPNotFound
)

@notfound_view_config(append_slash=HTTPMovedPermanently)
def aview(request):
return HTTPNotFound('not found')

The above means that a redirect to a slash-appended route will be attempted, but instead of
HTTPFound being used, HTTPMovedPermanently will be used for the redirect re-
sponse if a slash-appended route is found.

See Changing the Not Found View for detailed usage information.

Changed in version 1.9.1: Added the _depth and _category arguments.

class forbidden_view_config(**settings)
New in version 1.3.

An analogue of pyramid.view.view_config which registers a forbidden view using


pyramid.config.Configurator.add_forbidden_view().

The forbidden_view_config constructor accepts most of the same arguments as the constructor of
pyramid.view.view_config. It can be used in the same places, and behaves in largely the
same way, except it always registers a forbidden exception view instead of a ’normal’ view.

Example:

908 Contents
The Pyramid Web Framework, Version 1.9.4

from pyramid.view import forbidden_view_config


from pyramid.response import Response

@forbidden_view_config()
def forbidden(request):
return Response('You are not allowed', status='403 Forbidden
,→')

All arguments passed to this function have the same meaning as pyramid.view.
view_config() and each predicate argument restricts the set of circumstances under which this
notfound view will be invoked.

See Changing the Forbidden View for detailed usage information.

Changed in version 1.9.1: Added the _depth and _category arguments.

class exception_view_config(*args, **settings)


New in version 1.8.

An analogue of pyramid.view.view_config which registers an exception view using


pyramid.config.Configurator.add_exception_view().

The exception_view_config constructor requires an exception context, and additionally ac-


cepts most of the same arguments as the constructor of pyramid.view.view_config. It can
be used in the same places, and behaves in largely the same way, except it always registers an excep-
tion view instead of a ”normal” view that dispatches on the request context.

Example:

from pyramid.view import exception_view_config


from pyramid.response import Response

@exception_view_config(ValueError, renderer='json')
def error_view(request):
return {'error': str(request.exception)}

All arguments passed to this function have the same meaning as pyramid.view.
view_config(), and each predicate argument restricts the set of circumstances under which
this exception view will be invoked.

Changed in version 1.9.1: Added the _depth and _category arguments.

0.4. API Documentation 909


The Pyramid Web Framework, Version 1.9.4

pyramid.viewderivers

INGRESS
Constant representing the request ingress, for use in under arguments to pyramid.config.
Configurator.add_view_deriver().

VIEW
Constant representing the view callable at the end of the view pipeline, for use in over arguments
to pyramid.config.Configurator.add_view_deriver().

pyramid.wsgi

wsgiapp(wrapped)
Decorator to turn a WSGI application into a Pyramid view callable. This decorator differs
from the pyramid.wsgi.wsgiapp2() decorator inasmuch as fixups of PATH_INFO and
SCRIPT_NAME within the WSGI environment are not performed before the application is invoked.

E.g., the following in a views.py module:

@wsgiapp
def hello_world(environ, start_response):
body = 'Hello world'
start_response('200 OK', [ ('Content-Type', 'text/plain'),
('Content-Length', len(body)) ] )
return [body]

Allows the following call to pyramid.config.Configurator.add_view():

from views import hello_world


config.add_view(hello_world, name='hello_world.txt')

The wsgiapp decorator will convert the result of the WSGI application to a Response and return
it to Pyramid as if the WSGI app were a Pyramid view.

wsgiapp2(wrapped)
Decorator to turn a WSGI application into a Pyramid view callable. This decorator differs
from the pyramid.wsgi.wsgiapp() decorator inasmuch as fixups of PATH_INFO and
SCRIPT_NAME within the WSGI environment are performed before the application is invoked.

E.g. the following in a views.py module:

910 Contents
The Pyramid Web Framework, Version 1.9.4

@wsgiapp2
def hello_world(environ, start_response):
body = 'Hello world'
start_response('200 OK', [ ('Content-Type', 'text/plain'),
('Content-Length', len(body)) ] )
return [body]

Allows the following call to pyramid.config.Configurator.add_view():

from views import hello_world


config.add_view(hello_world, name='hello_world.txt')

The wsgiapp2 decorator will convert the result of the WSGI application to a Response and return it
to Pyramid as if the WSGI app were a Pyramid view. The SCRIPT_NAME and PATH_INFO values
present in the WSGI environment are fixed up before the application is invoked. In particular, a new
WSGI environment is generated, and the subpath of the request passed to wsgiapp2 is used as the
new request’s PATH_INFO and everything preceding the subpath is used as the SCRIPT_NAME.
The new environment is passed to the downstream WSGI application.

0.5 p* Scripts Documentation

0.5.1 p* Scripts Documentation

Command line programs (p* scripts) included with Pyramid.

pcreate

Render Pyramid scaffolding to an output directory.

Note: As of Pyramid 1.8, this command is deprecated. Use a specific cookiecutter instead: https://github.
com/Pylons/?q=cookiecutter

0.5. p* Scripts Documentation 911


The Pyramid Web Framework, Version 1.9.4

usage: pcreate [-h] [-s SCAFFOLD_NAME] [-t SCAFFOLD_NAME] [-l]


[--list-templates] [--package-name PACKAGE_NAME] [--
,→simulate]

[--overwrite] [--interactive] [--ignore-conflicting-


,→name]

[output_directory]

output_directory
The directory where the project will be created.

-h, --help
show this help message and exit

-s <scaffold_name>, --scaffold <scaffold_name>


Add a scaffold to the create process (multiple -s args accepted)

-t <scaffold_name>, --template <scaffold_name>


A backwards compatibility alias for -s/–scaffold. Add a scaffold to the create process (multiple -t
args accepted)

-l, --list
List all available scaffold names

--list-templates
A backwards compatibility alias for -l/–list. List all available scaffold names.

--package-name <package_name>
Package name to use. The name provided is assumed to be a valid Python package name, and will
not be validated. By default the package name is derived from the value of output_directory.

--simulate
Simulate but do no work

--overwrite
Always overwrite

--interactive
When a file would be overwritten, interrogate (this is the default, but you may specify it to override
–overwrite)

--ignore-conflicting-name
Do create a project even if the chosen name is the name of an already existing / importable package.

See also:

Creating the Project

912 Contents
The Pyramid Web Framework, Version 1.9.4

pdistreport

Show Python distribution versions and locations in use

usage: pdistreport [-h]

-h, --help
show this help message and exit

See also:

Showing All Installed Distributions and Their Versions

prequest

Submit a HTTP request to a web application.

This command makes an artifical request to a web application that uses a PasteDeploy (.ini) configuration
file for the server and application.

Use ”prequest config.ini /path” to request ”/path”.

Use ”prequest –method=POST config.ini /path < data” to do a POST with the given request body.

Use ”prequest –method=PUT config.ini /path < data” to do a PUT with the given request body.

Use ”prequest –method=PATCH config.ini /path < data” to do a PATCH with the given request body.

Use ”prequest –method=OPTIONS config.ini /path” to do an OPTIONS request.

Use ”prequest –method=PROPFIND config.ini /path” to do a PROPFIND request.

If the path is relative (doesn’t begin with ”/”) it is interpreted as relative to ”/”. The path passed to this
script should be URL-quoted. The path can be succeeded with a query string (e.g. ’/path?a=1&=b2’).

The variable ”environ[’paste.command_request’]” will be set to ”True” in the request’s WSGI environment,
so your application can distinguish these calls from normal requests.

0.5. p* Scripts Documentation 913


The Pyramid Web Framework, Version 1.9.4

usage: prequest [-h] [-n NAME] [--header NAME:VALUE] [-d]


[-m {GET,HEAD,POST,PUT,PATCH,DELETE,PROPFIND,
,→OPTIONS}]

[-l LOGIN]
[config_uri] [path_info] [config_vars [config_vars .
,→..]]

config_uri
The URI to the configuration file.

path_info
The path of the request.

config_vars
Variables required by the config file. For example, http_port=%(http_port)s would expect
http_port=8080 to be passed here.

-h, --help
show this help message and exit

-n <name>, --app-name <name>


Load the named application from the config file (default ’main’)

--header <name:value>
Header to add to request (you can use this option multiple times)

-d, --display-headers
Display status and headers before the response body

-m {GET,HEAD,POST,PUT,PATCH,DELETE,PROPFIND,OPTIONS}, --method {GET,HEAD,POST,PUT,


Request method type (GET, POST, PUT, PATCH, DELETE, PROPFIND, OPTIONS)

-l <login>, --login <login>


HTTP basic auth username:password pair

See also:

Invoking a Request

914 Contents
The Pyramid Web Framework, Version 1.9.4

proutes

Print all URL dispatch routes used by a Pyramid application in the order in which they are evaluated. Each
route includes the name of the route, the pattern of the route, and the view callable which will be invoked
when the route is matched.

This command accepts one positional argument named ’config_uri’. It specifies the PasteDeploy config
file to use for the interactive shell. The format is ’inifile#name’. If the name is left off, ’main’ will be
assumed. Example: ’proutes myapp.ini’.

usage: proutes [-h] [-g GLOB] [-f FORMAT]


[config_uri] [config_vars [config_vars ...]]

config_uri
The URI to the configuration file.

config_vars
Variables required by the config file. For example, http_port=%(http_port)s would expect
http_port=8080 to be passed here.

-h, --help
show this help message and exit

-g <glob>, --glob <glob>


Display routes matching glob pattern

-f <format>, --format <format>


Choose which columns to display, this will override the format key in the [proutes] ini section

See also:

Displaying All Application Routes

pserve

This command serves a web application that uses a PasteDeploy configuration file for the server and ap-
plication.

You can also include variable assignments like ’http_port=8080’ and then use %(http_port)s in your config
files.

0.5. p* Scripts Documentation 915


The Pyramid Web Framework, Version 1.9.4

usage: pserve [-h] [-n NAME] [-s SERVER_TYPE] [--server-name␣


,→SECTION_NAME]

[--reload] [--reload-interval RELOAD_INTERVAL] [-b] [-


,→v] [-q]

[config_uri] [config_vars [config_vars ...]]

config_uri
The URI to the configuration file.

config_vars
Variables required by the config file. For example, http_port=%(http_port)s would expect
http_port=8080 to be passed here.

-h, --help
show this help message and exit

-n <name>, --app-name <name>


Load the named application (default main)

-s <server_type>, --server <server_type>


Use the named server.

--server-name <section_name>
Use the named server as defined in the configuration file (default: main)

--reload
Use auto-restart file monitor

--reload-interval <reload_interval>
Seconds between checking files (low number can cause significant CPU usage)

-b, --browser
Open a web browser to the server url. The server url is determined from the ’open_url’ setting in the
’pserve’ section of the configuration file.

-v, --verbose
Set verbose level (default 1)

-q, --quiet
Suppress verbose output

See also:

Running the Project Application

916 Contents
The Pyramid Web Framework, Version 1.9.4

pshell

Open an interactive shell with a Pyramid app loaded. This command accepts one positional argument
named ”config_uri” which specifies the PasteDeploy config file to use for the interactive shell. The format
is ”inifile#name”. If the name is left off, the Pyramid default application will be assumed. Example:
”pshell myapp.ini#main”.

If you do not point the loader directly at the section of the ini file containing your Pyramid application, the
command will attempt to find the app for you. If you are loading a pipeline that contains more than one
Pyramid application within it, the loader will use the last one.

usage: pshell [-h] [-p PYTHON_SHELL] [-l] [--setup SETUP]


[config_uri] [config_vars [config_vars ...]]

config_uri
The URI to the configuration file.

config_vars
Variables required by the config file. For example, http_port=%(http_port)s would expect
http_port=8080 to be passed here.

-h, --help
show this help message and exit

-p <python_shell>, --python-shell <python_shell>


Select the shell to use. A list of possible shells is available using the –list-shells option.

-l, --list-shells
List all available shells.

--setup <setup>
A callable that will be passed the environment before it is made available to the shell. This option
will override the ’setup’ key in the [pshell] ini section.

See also:

The Interactive Shell

0.5. p* Scripts Documentation 917


The Pyramid Web Framework, Version 1.9.4

ptweens

Print all implicit and explicit tween objects used by a Pyramid application. The handler output includes
whether the system is using an explicit tweens ordering (will be true when the ”pyramid.tweens” deploy-
ment setting is used) or an implicit tweens ordering (will be true when the ”pyramid.tweens” deployment
setting is not used).

This command accepts one positional argument named ”config_uri” which specifies the PasteDeploy con-
fig file to use for the interactive shell. The format is ”inifile#name”. If the name is left off, ”main” will be
assumed. Example: ”ptweens myapp.ini#main”.

usage: ptweens [-h] [config_uri] [config_vars [config_vars ...]]

config_uri
The URI to the configuration file.

config_vars
Variables required by the config file. For example, http_port=%(http_port)s would expect
http_port=8080 to be passed here.

-h, --help
show this help message and exit

See also:

Displaying ”Tweens”

pviews

Print, for a given URL, the views that might match. Underneath each potentially matching route, list
the predicates required. Underneath each route+predicate set, print each view that might match and its
predicates.

This command accepts two positional arguments: ’config_uri’ specifies the PasteDeploy config file to use
for the interactive shell. The format is ’inifile#name’. If the name is left off, ’main’ will be assumed.
’url’ specifies the path info portion of a URL that will be used to find matching views. Example: ’proutes
myapp.ini#main /url’

918 Contents
The Pyramid Web Framework, Version 1.9.4

usage: pviews [-h] [config_uri] [url] [config_vars [config_vars ...


,→]]

config_uri
The URI to the configuration file.

url
The path info portion of the URL.

config_vars
Variables required by the config file. For example, http_port=%(http_port)s would expect
http_port=8080 to be passed here.

-h, --help
show this help message and exit

See also:

Displaying Matching Views for a Given URL

0.6 Change History

0.6.1 What’s New in Pyramid 1.7

This article explains the new features in Pyramid version 1.7 as compared to its predecessor, Pyramid
1.6. It also documents backwards incompatibilities between the two versions and deprecations added to
Pyramid 1.7, as well as software dependency changes and notable documentation additions.

Backwards Incompatibilities

• The default hash algorithm for pyramid.authentication.


AuthTktAuthenticationPolicy has changed from md5 to sha512. If you are using the
authentication policy and need to continue using md5, please explicitly set hashalg='md5'.

If you are not currently specifying the hashalg option in your apps, then this change means any
existing auth tickets (and associated cookies) will no longer be valid, users will be logged out, and
have to login to their accounts again.

This change has been issuing a DeprecationWarning since Pyramid 1.4.

See https://github.com/Pylons/pyramid/pull/2496

0.6. Change History 919


The Pyramid Web Framework, Version 1.9.4

• Python 2.6 and 3.2 are no longer supported by Pyramid. See https://github.com/Pylons/pyramid/
issues/2368 and https://github.com/Pylons/pyramid/pull/2256

• The pyramid.session.check_csrf_token() function no longer validates a csrf token in


the query string of a request. Only headers and request bodies are supported. See https://github.
com/Pylons/pyramid/pull/2500

• A global permission set via pyramid.config.Configurator.


set_default_permission() will no longer affect exception views. A permission must be
set explicitly on the view for it to be enforced. See https://github.com/Pylons/pyramid/pull/2534

Feature Additions

• A new View Derivers concept has been added to Pyramid to allow framework authors to inject
elements into the standard Pyramid view pipeline and affect all views in an application. This is
similar to a decorator except that it has access to options passed to config.add_view and can
affect other stages of the pipeline such as the raw response from a view or prior to security checks.
See https://github.com/Pylons/pyramid/pull/2021

• Added a require_csrf view option which will enforce CSRF checks on requests with an un-
safe method as defined by RFC2616. If the CSRF check fails a BadCSRFToken exception will
be raised and may be caught by exception views (the default response is a 400 Bad Request).
This option should be used in place of the deprecated check_csrf view predicate which would
normally result in unexpected 404 Not Found response to the client instead of a catchable ex-
ception. See Checking CSRF Tokens Automatically, https://github.com/Pylons/pyramid/pull/2413
and https://github.com/Pylons/pyramid/pull/2500

• Added a new method, pyramid.config.Configurator.


set_csrf_default_options(), for configuring CSRF checks used by the
require_csrf=True view option. This method can be used to turn on CSRF checks
globally for every view in the application. This should be considered a good default for web-
sites built on Pyramid. It is possible to opt-out of CSRF checks on a per-view basis by setting
require_csrf=False on those views. See Checking CSRF Tokens Automatically and
https://github.com/Pylons/pyramid/pull/2413 and https://github.com/Pylons/pyramid/pull/2518

• Added an additional CSRF validation that checks the origin/referrer of a request and makes sure it
matches the current request.domain. This particular check is only active when accessing a site
over HTTPS as otherwise browsers don’t always send the required information. If this additional
CSRF validation fails a BadCSRFOrigin exception will be raised and may be caught by exception
views (the default response is 400 Bad Request). Additional allowed origins may be configured
by setting pyramid.csrf_trusted_origins to a list of domain names (with ports if on a
non standard port) to allow. Subdomains are not allowed unless the domain name has been prefixed
with a .. See https://github.com/Pylons/pyramid/pull/2501

920 Contents
The Pyramid Web Framework, Version 1.9.4

• Added a new pyramid.session.check_csrf_origin() API for validating the origin or


referrer headers against the request’s domain. See https://github.com/Pylons/pyramid/pull/2501

• Subclasses of pyramid.httpexceptions.HTTPException will now take into account the


best match for the clients Accept header, and depending on what is requested will return text/
html, application/json or text/plain. The default for */* is still text/html, but
if application/json is explicitly mentioned it will now receive a valid JSON response. See
https://github.com/Pylons/pyramid/pull/2489

• A new event, pyramid.events.BeforeTraversal, and interface pyramid.


interfaces.IBeforeTraversal have been introduced that will notify listeners before
traversal starts in the router. See Request Processing as well as https://github.com/Pylons/pyramid/
pull/2469 and https://github.com/Pylons/pyramid/pull/1876

• A new method, pyramid.request.Request.invoke_exception_view(), which can


be used to invoke an exception view and get back a response. This is useful for rendering an exception
view outside of the context of the EXCVIEW tween where you may need more control over the
request. See https://github.com/Pylons/pyramid/pull/2393

• A global permission set via pyramid.config.Configurator.


set_default_permission() will no longer affect exception views. A permission must be
set explicitly on the view for it to be enforced. See https://github.com/Pylons/pyramid/pull/2534

• Allow a leading = on the key of the request param predicate. For example, '=abc=1' is equivalent
down to request.params['=abc'] == '1'. See https://github.com/Pylons/pyramid/pull/
1370

• Allow using variable substitutions like %(LOGGING_LOGGER_ROOT_LEVEL)s for logging sec-


tions of the .ini file and populate these variables from the pserve command line – e.g.:

pserve development.ini LOGGING_LOGGER_ROOT_LEVEL=DEBUG

This support is thanks to the new global_conf option on pyramid.paster.


setup_logging(). See https://github.com/Pylons/pyramid/pull/2399

• The pyramid.tweens.EXCVIEW tween will now re-raise the original exception if no exception
view could be found to handle it. This allows the exception to be handled upstream by another tween
or middleware. See https://github.com/Pylons/pyramid/pull/2567

0.6. Change History 921


The Pyramid Web Framework, Version 1.9.4

Deprecations

• The check_csrf view predicate has been deprecated. Use the new require_csrf option or
the pyramid.require_default_csrf setting to ensure that the pyramid.exceptions.
BadCSRFToken exception is raised. See https://github.com/Pylons/pyramid/pull/2413
• Support for Python 3.3 will be removed in Pyramid 1.8. https://github.com/Pylons/pyramid/issues/
2477

Scaffolding Enhancements

• A complete overhaul of the alchemy scaffold to show more modern best practices with regards
to SQLAlchemy session management, as well as a more modular approach to configuration, sepa-
rating routes into a separate module to illustrate uses of pyramid.config.Configurator.
include(). See https://github.com/Pylons/pyramid/pull/2024

Documentation Enhancements

A massive overhaul of the packaging and tools used in the documentation was completed in https://github.
com/Pylons/pyramid/pull/2468. A summary follows:
• All docs now recommend using pip instead of easy_install.
• The installation docs now expect the user to be using Python 3.4 or greater with access to the
python3 -m venv tool to create virtual environments.
• Tutorials now use py.test and pytest-cov instead of nose and coverage.
• Further updates to the scaffolds as well as tutorials and their src files.
Along with the overhaul of the alchemy scaffold came a total overhaul of the SQLAlchemy + URL
dispatch wiki tutorial tutorial to introduce more modern features into the usage of SQLAlchemy with
Pyramid and provide a better starting point for new projects. See https://github.com/Pylons/pyramid/pull/
2024 for more. Highlights were:
• New SQLAlchemy session management without any global DBSession. Replaced by a per-request
request.dbsession property.
• A new authentication chapter demonstrating how to get simple authentication bootstrapped quickly
in an application.
• Authorization was overhauled to show the use of per-route context factories which demonstrate
object-level authorization on top of simple group-level authorization. Did you want to restrict page
edits to only the owner but couldn’t figure it out before? Here you go!
• The users and groups are stored in the database now instead of within tutorial-specific global vari-
ables.
• User passwords are stored using bcrypt.

922 Contents
The Pyramid Web Framework, Version 1.9.4

0.6.2 What’s New in Pyramid 1.6

This article explains the new features in Pyramid version 1.6 as compared to its predecessor, Pyramid
1.5. It also documents backwards incompatibilities between the two versions and deprecations added to
Pyramid 1.6, as well as software dependency changes and notable documentation additions.

Backwards Incompatibilities

• IPython and BPython support have been removed from pshell in the core. To continue using them
on Pyramid 1.6+, you must install the binding packages explicitly. One way to do this is by adding
pyramid_ipython (or pyramid_bpython) to the install_requires section of your
package’s setup.py file, then re-running setup.py develop:

setup(
#...
install_requires=[
'pyramid_ipython', # new dependency
'pyramid',
#...
],
)

• request.response will no longer be mutated when using the render_to_response()


API. It is now necessary to pass in a response= argument to render_to_response()
if you wish to supply the renderer with a custom response object. If you do not pass one,
then a response object will be created using the current response factory. Almost all render-
ers mutate the request.response response object (for example, the JSON renderer sets
request.response.content_type to application/json). However, when invoking
render_to_response, it is not expected that the response object being returned would be the
same one used later in the request. The response object returned from render_to_response is
now explicitly different from request.response. This does not change the API of a renderer.
See https://github.com/Pylons/pyramid/pull/1563

• In an effort to combat a common issue it is now a ConfigurationError to register a view


callable that is actually an unbound method when using the default view mapper. As unbound
methods do not exist in PY3+ possible errors are detected by checking if the first parameter is
named self. For example, config.add_view(ViewClass.some_method, ...) should actually be con-
fig.add_view(ViewClass, attr=’some_method)’. This was always an issue in Pyramid on PY2 but
the backward incompatibility is on PY3+ where you may not use a function with the first parameter
named self. In this case it looks too much like a common error and the exception will be raised.
See https://github.com/Pylons/pyramid/pull/1498

0.6. Change History 923


The Pyramid Web Framework, Version 1.9.4

Feature Additions

• Python 3.5 and pypy3 compatibility.

• pserve --reload will no longer crash on syntax errors. See https://github.com/Pylons/


pyramid/pull/2044

• Cache busting for static resources has been added and is available via a new pyramid.config.
Configurator.add_cache_buster() API. Core APIs are shipped for both cache busting
via query strings and via asset manifests for integrating into custom asset pipelines. See https://
github.com/Pylons/pyramid/pull/1380 and https://github.com/Pylons/pyramid/pull/1583 and https:
//github.com/Pylons/pyramid/pull/2171

• Assets can now be overidden by an absolute path on the filesystem when us-
ing the override_asset() API. This makes it possible to fully support serv-
ing up static content from a mutable directory while still being able to use the
static_url() API and add_static_view(). Previously it was not possible to
use add_static_view() with an absolute path and generate urls to the content. This
change replaces the call, config.add_static_view('/abs/path', 'static'),
with config.add_static_view('myapp:static', 'static') and config.
override_asset(to_override='myapp:static/', override_with='/abs/
path/'). The myapp:static asset spec is completely made up and does not need to exist—it
is used for generating URLs via request.static_url('myapp:static/foo.png').
See https://github.com/Pylons/pyramid/issues/1252

• Added set_response_factory() and the response_factory keyword argument to the


constructor of Configurator for defining a factory that will return a custom Response class.
See https://github.com/Pylons/pyramid/pull/1499

• Added pyramid.config.Configurator.root_package attribute and init parameter to


assist with includible packages that wish to resolve resources relative to the package in which the
configurator was created. This is especially useful for add-ons that need to load asset specs from
settings, in which case it may be natural for a developer to define imports or assets relative to the
top-level package. See https://github.com/Pylons/pyramid/pull/1337

• Overall improvements for the proutes command. Added --format and --glob arguments
to the command, introduced the method column for displaying available request methods, and
improved the view output by showing the module instead of just __repr__. See https://github.
com/Pylons/pyramid/pull/1488

• pserve can now take a -b or --browser option to open the server URL in a web browser. See
https://github.com/Pylons/pyramid/pull/1533

924 Contents
The Pyramid Web Framework, Version 1.9.4

• Support keyword-only arguments and function annotations in views in Python 3. See https://github.
com/Pylons/pyramid/pull/1556

• The append_slash argument of add_notfound_view() will now accept anything that im-
plements the IResponse interface and will use that as the response class instead of the default
HTTPFound. See https://github.com/Pylons/pyramid/pull/1610

• The Configurator has grown the ability to allow actions to call other actions during a commit
cycle. This enables much more logic to be placed into actions, such as the ability to invoke other
actions or group them for improved conflict detection. We have also exposed and documented the
configuration phases that Pyramid uses in order to further assist in building conforming add-ons.
See https://github.com/Pylons/pyramid/pull/1513

• Allow an iterator to be returned from a renderer. Previously it was only possible to return bytes or
unicode. See https://github.com/Pylons/pyramid/pull/1417

• Improve robustness to timing attacks in the AuthTktCookieHelper and the


SignedCookieSessionFactory classes by using the stdlib’s hmac.compare_digest if
it is available (such as Python 2.7.7+ and 3.3+). See https://github.com/Pylons/pyramid/pull/1457

• Improve the readability of the pcreate shell script output. See https://github.com/Pylons/pyramid/
pull/1453

• Make it simple to define notfound and forbidden views that wish to use the default exception-
response view, but with altered predicates and other configuration options. The view argument is
now optional in add_notfound_view() and add_forbidden_view() See https://github.
com/Pylons/pyramid/issues/494

• The pshell script will now load a PYTHONSTARTUP file if one is defined in the environment
prior to launching the interpreter. See https://github.com/Pylons/pyramid/pull/1448

• Add new HTTP exception objects for status codes 428 Precondition Required, 429
Too Many Requests and 431 Request Header Fields Too Large in pyramid.
httpexceptions. See https://github.com/Pylons/pyramid/pull/1372/files

• pcreate when run without a scaffold argument will now print information on the missing flag,
as well as a list of available scaffolds. See https://github.com/Pylons/pyramid/pull/1566 and https:
//github.com/Pylons/pyramid/issues/1297

• pcreate will now ask for confirmation if invoked with an argument for a project name that already
exists or is importable in the current environment. See https://github.com/Pylons/pyramid/issues/
1357 and https://github.com/Pylons/pyramid/pull/1837

0.6. Change History 925


The Pyramid Web Framework, Version 1.9.4

• Add pyramid.request.apply_request_extensions() function which can be used in


testing to apply any request extensions configured via config.add_request_method. Pre-
viously it was only possible to test the extensions by going through Pyramid’s router. See https:
//github.com/Pylons/pyramid/pull/1581
• Make it possible to subclass pyramid.request.Request and also use pyramid.
request.Request.add_request.method. See https://github.com/Pylons/pyramid/
issues/1529
• Additional shells for pshell can now be registered as entry points. See https://github.com/Pylons/
pyramid/pull/1891 and https://github.com/Pylons/pyramid/pull/2012
• The variables injected into pshell are now displayed with their docstrings instead of the default
str(obj) when possible. See https://github.com/Pylons/pyramid/pull/1929

Deprecations

• The pserve command’s daemonization features, as well as --monitor-restart, have been


deprecated. This includes the [start,stop,restart,status] subcommands, as well
as the --daemon, --stop-daemon, --pid-file, --status, --user, and --group
flags. See https://github.com/Pylons/pyramid/pull/2120 and https://github.com/Pylons/pyramid/
pull/2189 and https://github.com/Pylons/pyramid/pull/1641
Please use a real process manager in the future instead of relying on pserve to daemonize itself.
Many options exist, including your operating system’s services, such as Systemd or Upstart, as well
as Python-based solutions like Circus and Supervisor.
See https://github.com/Pylons/pyramid/pull/1641 and https://github.com/Pylons/pyramid/pull/
2120
• The principal argument to pyramid.security.remember() was renamed to userid.
Using principal as the argument name still works and will continue to work for the next few
releases, but a deprecation warning is printed.

Scaffolding Enhancements

• Added line numbers to the log formatters in the scaffolds to assist with debugging. See https://github.
com/Pylons/pyramid/pull/1326
• Updated scaffold generating machinery to return the version of Pyramid and its documentation for
use in scaffolds. Updated starter, alchemy and zodb templates to have links to correctly
versioned documentation, and to reflect which Pyramid was used to generate the scaffold.
• Removed non-ASCII copyright symbol from templates, as this was causing the scaffolds to fail for
project generation.

926 Contents
The Pyramid Web Framework, Version 1.9.4

Documentation Enhancements

• Removed logging configuration from Quick Tutorial ini files, except for scaffolding- and logging-
related chapters, to avoid needing to explain it too early.

• Improve and clarify the documentation on what Pyramid defines as a principal and a userid
in its security APIs. See https://github.com/Pylons/pyramid/pull/1399

• Moved the documentation for accept on pyramid.config.Configurator.


add_view() to no longer be part of the predicate list. See https://github.com/Pylons/
pyramid/issues/1391 for a bug report stating not_ was failing on accept. Discussion
with @mcdonc led to the conclusion that it should not be documented as a predicate. See
https://github.com/Pylons/pyramid/pull/1487 for this PR.

• Clarify a previously-implied detail of the ISession.invalidate API documentation.

• Add documentation of command line programs (p* scripts). See https://github.com/Pylons/


pyramid/pull/2191

0.6.3 What’s New in Pyramid 1.5

This article explains the new features in Pyramid version 1.5 as compared to its predecessor, Pyramid
1.4. It also documents backwards incompatibilities between the two versions and deprecations added to
Pyramid 1.5, as well as software dependency changes and notable documentation additions.

Major Backwards Incompatibilities

• Pyramid no longer depends on or configures the Mako and Chameleon templating system renderers
by default. Disincluding these templating systems by default means that the Pyramid core has fewer
dependencies and can run on future platforms without immediate concern for the compatibility of
its templating add-ons. It also makes maintenance slightly more effective, as different people can
maintain the templating system add-ons that they understand and care about without needing commit
access to the Pyramid core, and it allows users who just don’t want to see any packages they don’t
use come along for the ride when they install Pyramid.

This means that upon upgrading to Pyramid 1.5a2+, projects that use either of these templating
systems will see a traceback that ends something like this when their application attempts to render
a Chameleon or Mako template:

0.6. Change History 927


The Pyramid Web Framework, Version 1.9.4

ValueError: No such renderer factory .pt

Or:

ValueError: No such renderer factory .mako

Or:

ValueError: No such renderer factory .mak

Support for Mako templating has been moved into an add-on package named pyramid_mako,
and support for Chameleon templating has been moved into an add-on package named
pyramid_chameleon. These packages are drop-in replacements for the old built-in support
for these templating langauges. All you have to do is install them and make them active in your con-
figuration to register renderer factories for .pt and/or .mako (or .mak) to make your application
work again.

To re-add support for Chameleon and/or Mako template renderers into your existing projects, follow
the below steps.

If you depend on Mako templates:

– Make sure the pyramid_mako package is installed. One way to do this is by adding
pyramid_mako to the install_requires section of your package’s setup.py file
and afterwards rerunning setup.py develop:

setup(
#...
install_requires=[
'pyramid_mako', # new dependency
'pyramid',
#...
],
)

– Within the portion of your application which instantiates a Pyramid Configurator (of-
ten the main() function in your project’s __init__.py file), tell Pyramid to include the
pyramid_mako includeme:

928 Contents
The Pyramid Web Framework, Version 1.9.4

config = Configurator(.....)
config.include('pyramid_mako')

If you depend on Chameleon templates:

– Make sure the pyramid_chameleon package is installed. One way to do this is by adding
pyramid_chameleon to the install_requires section of your package’s setup.
py file and afterwards rerunning setup.py develop:

setup(
#...
install_requires=[
'pyramid_chameleon', # new dependency
'pyramid',
#...
],
)

– Within the portion of your application which instantiates a Pyramid Configurator (of-
ten the main() function in your project’s __init__.py file), tell Pyramid to include the
pyramid_chameleon includeme:

config = Configurator(.....)
config.include('pyramid_chameleon')

Note that it’s also fine to install these packages into older Pyramids for forward compatibility pur-
poses. Even if you don’t upgrade to Pyramid 1.5 immediately, performing the above steps in a
Pyramid 1.4 installation is perfectly fine, won’t cause any difference, and will give you forward
compatibility when you eventually do upgrade to Pyramid 1.5.

With the removal of Mako and Chameleon support from the core, some unit tests that use
the pyramid.renderers.render* methods may begin to fail. If any of your unit
tests are invoking either pyramid.renderers.render() or pyramid.renderers.
render_to_response() with either Mako or Chameleon templates then the pyramid.
config.Configurator instance in effect during the unit test should be also be updated to
include the addons, as shown above. For example:

0.6. Change History 929


The Pyramid Web Framework, Version 1.9.4

class ATest(unittest.TestCase):
def setUp(self):
self.config = pyramid.testing.setUp()
self.config.include('pyramid_mako')

def test_it(self):
result = pyramid.renderers.render('mypkg:templates/home.
,→mako', {})

Or:

class ATest(unittest.TestCase):
def setUp(self):
self.config = pyramid.testing.setUp()
self.config.include('pyramid_chameleon')

def test_it(self):
result = pyramid.renderers.render('mypkg:templates/home.
,→pt', {})

• If you’re using the Pyramid debug toolbar, when you upgrade Pyramid to 1.5a2+, you’ll also need to
upgrade the pyramid_debugtoolbar package to at least version 1.0.8, as older toolbar versions
are not compatible with Pyramid 1.5a2+ due to the removal of Mako support from the core. It’s fine
to use this newer version of the toolbar code with older Pyramids too.

Feature Additions

The feature additions in Pyramid 1.5 follow.

• Python 3.4 compatibility.

• Add pdistreport script, which prints the Python version in use, the Pyramid version in use, and
the version number and location of all Python distributions currently installed.

• Add the ability to invert the result of any view, route, or subscriber predicate value using the not_
class. For example:

930 Contents
The Pyramid Web Framework, Version 1.9.4

from pyramid.config import not_

@view_config(route_name='myroute', request_method=not_('POST'))
def myview(request): ...

The above example will ensure that the view is called if the request method is not POST, at least if
no other view is more specific.

The pyramid.config.not_ class can be used against any value that is a predicate value passed
in any of these contexts:

– pyramid.config.Configurator.add_view()

– pyramid.config.Configurator.add_route()

– pyramid.config.Configurator.add_subscriber()

– pyramid.view.view_config()

– pyramid.events.subscriber()

• View lookup will now search for valid views based on the inheritance hierarchy of the context. It
tries to find views based on the most specific context first, and upon predicate failure, will move
up the inheritance chain to test views found by the super-type of the context. In the past, only the
most specific type containing views would be checked and if no matching view could be found then
a PredicateMismatch would be raised. Now predicate mismatches don’t hide valid views registered
on super-types. Here’s an example that now works:

class IResource(Interface):

...

@view_config(context=IResource)
def get(context, request):

...

@view_config(context=IResource, request_method='POST')
def post(context, request):

...
(continues on next page)

0.6. Change History 931


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)

@view_config(context=IResource, request_method='DELETE')
def delete(context, request):

...

@implementer(IResource)
class MyResource:

...

@view_config(context=MyResource, request_method='POST')
def override_post(context, request):

...

Previously the override_post view registration would hide the get and delete views in the context of
MyResource – leading to a predicate mismatch error when trying to use GET or DELETE meth-
ods. Now the views are found and no predicate mismatch is raised. See https://github.com/Pylons/
pyramid/pull/786 and https://github.com/Pylons/pyramid/pull/1004 and https://github.com/Pylons/
pyramid/pull/1046

• scripts/prequest.py (aka the prequest console script): added support for submitting
PUT and PATCH requests. See https://github.com/Pylons/pyramid/pull/1033. add support for sub-
mitting OPTIONS and PROPFIND requests, and allow users to specify basic authentication creden-
tials in the request via a --login argument to the script. See https://github.com/Pylons/pyramid/
pull/1039.

• The pyramid.config.Configurator.add_route() method now supports being called


with an external URL as pattern. See https://github.com/Pylons/pyramid/issues/611 and the docu-
mentation section External Routes.

• pyramid.authorization.ACLAuthorizationPolicy supports __acl__ as a


callable. This removes the ambiguity between the potential AttributeError that would be
raised on the context when the property was not defined and the AttributeError that could
be raised from any user-defined code within a dynamic property. It is recommended to define a dy-
namic ACL as a callable to avoid this ambiguity. See https://github.com/Pylons/pyramid/issues/735.

• Allow a protocol-relative URL (e.g. //example.com/images) to be passed to pyramid.


config.Configurator.add_static_view(). This allows externally-hosted static URLs
to be generated based on the current protocol.

932 Contents
The Pyramid Web Framework, Version 1.9.4

• The pyramid.authentication.AuthTktAuthenticationPolicy class has two new


options to configure its domain usage:

– parent_domain: if set the authentication cookie is set on the parent domain. This is useful
if you have multiple sites sharing the same domain.

– domain: if provided the cookie is always set for this domain, bypassing all usual logic.

See https://github.com/Pylons/pyramid/pull/1028, https://github.com/Pylons/pyramid/pull/1072


and https://github.com/Pylons/pyramid/pull/1078.

• The pyramid.authentication.AuthTktPolicy now supports IPv6 addresses when us-


ing the include_ip=True option. This is possibly incompatible with alternative auth_tkt
implementations, as the specification does not define how to properly handle IPv6. See https:
//github.com/Pylons/pyramid/issues/831.

• Make it possible to use variable arguments via pyramid.paster.get_appsettings().


This also allowed the generated initialize_db script from the alchemy scaffold to grow
support for options in the form a=1 b=2 so you can fill in values in a parameterized .ini
file, e.g. initialize_myapp_db etc/development.ini a=1 b=2. See https://github.
com/Pylons/pyramid/pull/911

• The request.session.check_csrf_token() method and the check_csrf view pred-


icate now take into account the value of the HTTP header named X-CSRF-Token (as well as the
csrf_token form parameter, which they always did). The header is tried when the form param-
eter does not exist.

• You can now generate ”hybrid” urldispatch/traversal URLs more easily by using the new
route_name, route_kw and route_remainder_name arguments to resource_url()
and resource_path(). See Generating Hybrid URLs.

• A new http exception superclass named HTTPSuccessful was added. You can use this class as
the context of an exception view to catch all 200-series ”exceptions” (e.g. ”raise HTTPOk”). This
also allows you to catch only the HTTPOk exception itself; previously this was impossible because
a number of other exceptions (such as HTTPNoContent) inherited from HTTPOk, but now they
do not.

• It is now possible to escape double braces in Pyramid scaffolds (unescaped, these represent replace-
ment values). You can use \{\{a\}\} to represent a ”bare” {{a}}. See https://github.com/
Pylons/pyramid/pull/862

• Add localizer and locale_name properties (reified) to pyramid.request.


Request. See https://github.com/Pylons/pyramid/issues/508. Note that the pyramid.
i18n.get_localizer() and pyramid.i18n.get_locale_name() functions now
simply look up these properties on the request.

0.6. Change History 933


The Pyramid Web Framework, Version 1.9.4

• The pserve command now takes a -v (or --verbose) flag and a -q (or --quiet) flag. Output
from running pserve can be controlled using these flags. -v can be specified multiple times to
increase verbosity. -q sets verbosity to 0 unconditionally. The default verbosity level is 1.
• The alchemy scaffold tests now provide better coverage. See https://github.com/Pylons/pyramid/
pull/1029
• Users can now provide dotted Python names to as the factory argument the Con-
figurator methods named add_view_predicate(), add_route_predicate() and
add_subscriber_predicate(). Instead of passing the predicate factory directly, you can
pass a dotted name which refers to the factory.
• pyramid.path.package_name() no longer thows an exception when resolving the package
name for namespace packages that have no __file__ attribute.
• An authorization API has been added as a method of the request: pyramid.request.
Request.has_permission(). It is a method-based alternative to the pyramid.
security.has_permission() API and works exactly the same. The older API is now dep-
recated.
• Property API attributes have been added to the request for easier access to authentica-
tion data: pyramid.request.Request.authenticated_userid, pyramid.
request.Request.unauthenticated_userid, and pyramid.request.Request.
effective_principals. These are analogues, respectively, of pyramid.security.
authenticated_userid(), pyramid.security.unauthenticated_userid(),
and pyramid.security.effective_principals(). They operate exactly the same,
except they are attributes of the request instead of functions accepting a request. They are properties,
so they cannot be assigned to. The older function-based APIs are now deprecated.
• Pyramid’s console scripts (pserve, pviews, etc) can now be run directly, allowing custom argu-
ments to be sent to the python interpreter at runtime. For example:

python -3 -m pyramid.scripts.pserve development.ini

• Added a specific subclass of pyramid.httpexceptions.HTTPBadRequest named


pyramid.exceptions.BadCSRFToken which will now be raised in response to failures in
the check_csrf_token view predicate. See https://github.com/Pylons/pyramid/pull/1149
• Added a new SignedCookieSessionFactory which is very similar to the
UnencryptedCookieSessionFactoryConfig but with a clearer focus on sign-
ing content. The custom serializer arguments to this function should only focus on se-
rializing, unlike its predecessor which required the serializer to also perform signing.
See https://github.com/Pylons/pyramid/pull/1142 . Note that cookies generated using
SignedCookieSessionFactory are not compatible with cookies generated using
UnencryptedCookieSessionFactory, so existing user session data will be destroyed
if you switch to it.

934 Contents
The Pyramid Web Framework, Version 1.9.4

• Added a new BaseCookieSessionFactory which acts as a generic cookie factory that can be
used by framework implementors to create their own session implementations. It provides a reusable
API which focuses strictly on providing a dictionary-like object that properly handles renewals, time-
outs, and conformance with the ISession API. See https://github.com/Pylons/pyramid/pull/1142

• We no longer eagerly clear request.exception and request.exc_info in the exception


view tween. This makes it possible to inspect exception information within a finished callback. See
https://github.com/Pylons/pyramid/issues/1223.

Other Backwards Incompatibilities

• Modified the current_route_url() method. The method previously returned the URL with-
out the query string by default, it now does attach the query string unless it is overriden.

• The route_url() and route_path() APIs no longer quote / to %2F when a replacement
value contains a /. This was pointless, as WSGI servers always unquote the slash anyway, and
Pyramid never sees the quoted value.

• It is no longer possible to set a locale_name attribute of the request, nor is it possible to set a
localizer attribute of the request. These are now ”reified” properties that look up a locale name
and localizer respectively using the machinery described in Internationalization and Localization.

• If you send an X-Vhm-Root header with a value that ends with any number of slashes, the trail-
ing slashes will be removed before the URL is generated when you use resource_url() or
resource_path(). Previously the virtual root path would not have trailing slashes stripped,
which would influence URL generation.

• The pyramid.interfaces.IResourceURL interface has now grown two new attributes:


virtual_path_tuple and physical_path_tuple. These should be the tuple form of
the resource’s path (physical and virtual).

• Removed the request.response_* varying attributes (such as‘‘request.response_headers‘‘) .


These attributes had been deprecated since Pyramid 1.1, and as per the deprecation policy, have now
been removed.

• request.response will no longer be mutated when using the pyramid.renderers.


render() API. Almost all renderers mutate the request.response response object (for
example, the JSON renderer sets request.response.content_type to application/
json), but this is only necessary when the renderer is generating a response; it was a bug when it
was done as a side effect of calling pyramid.renderers.render().

• Removed the bfg2pyramid fixer script.

0.6. Change History 935


The Pyramid Web Framework, Version 1.9.4

• The pyramid.events.NewResponse event is now sent after response callbacks are executed.
It previously executed before response callbacks were executed. Rationale: it’s more useful to be
able to inspect the response after response callbacks have done their jobs instead of before.

• Removed the class named pyramid.view.static that had been deprecated since Pyramid 1.1.
Instead use pyramid.static.static_view with the use_subpath=True argument.

• Removed the pyramid.view.is_response function that had been deprecated since Pyramid
1.1. Use the pyramid.request.Request.is_response() method instead.

• Removed the ability to pass the following arguments to pyramid.config.Configurator.


add_route(): view, view_context. view_for, view_permission,
view_renderer, and view_attr. Using these arguments had been deprecated since
Pyramid 1.1. Instead of passing view-related arguments to add_route, use a separate call to
pyramid.config.Configurator.add_view() to associate a view with a route using its
route_name argument. Note that this impacts the pyramid.config.Configurator.
add_static_view() function too, because it delegates to‘‘add_route‘‘.

• Removed the ability to influence and query a pyramid.request.Request object as if it were a


dictionary. Previously it was possible to use methods like __getitem__, get, items, and other
dictlike methods to access values in the WSGI environment. This behavior had been deprecated
since Pyramid 1.1. Use methods of request.environ (a real dictionary) instead.

• Removed ancient backwards compatibily hack in pyramid.traversal.


DefaultRootFactory which populated the __dict__ of the factory with the matchdict
values for compatibility with BFG 0.9.

• The renderer_globals_factory argument to the pyramid.config.Configurator


constructor and the coresponding argument to setup_registry() has been removed. The
set_renderer_globals_factory method of Configurator has also been removed. The
(internal) pyramid.interfaces.IRendererGlobals interface was also removed. These
arguments, methods and interfaces had been deprecated since 1.1. Use a BeforeRender event
subscriber as documented in the ”Hooks” chapter of the Pyramid narrative documentation instead
of providing renderer globals values to the configurator.

• The key/values in the _query parameter of pyramid.request.Request.route_url()


and the query parameter of pyramid.request.Request.resource_url() (and their
variants), used to encode a value of None as the string 'None', leaving the resulting query string
to be a=b&key=None. The value is now dropped in this situation, leaving a query string of
a=b&key=. See https://github.com/Pylons/pyramid/issues/1119

936 Contents
The Pyramid Web Framework, Version 1.9.4

Deprecations

• Returning a ("defname", dict) tuple from a view which has a Mako renderer is now depre-
cated. Instead you should use the renderer spelling foo#defname.mak in the view configuration
definition and return a dict only.

• The pyramid.config.Configurator.set_request_property() method now issues


a deprecation warning when used. It had been docs-deprecated in 1.4 but did not issue a deprecation
warning when used.

• pyramid.security.has_permission() is now deprecated in favor of using pyramid.


request.Request.has_permission().

• The pyramid.security.authenticated_userid(), pyramid.


security.unauthenticated_userid(), and pyramid.security.
effective_principals() functions have been deprecated. Use pyramid.
request.Request.authenticated_userid, pyramid.request.
Request.unauthenticated_userid and pyramid.request.Request.
effective_principals instead.

• Deprecate the pyramid.interfaces.ITemplateRenderer interface. It was ill-defined


and became unused when Mako and Chameleon template bindings were split into their own pack-
ages.

• The pyramid.session.UnencryptedCookieSessionFactoryConfig
API has been deprecated and is superseded by the pyramid.session.
SignedCookieSessionFactory. Note that while the cookies generated by the
UnencryptedCookieSessionFactoryConfig are compatible with cookies gener-
ated by old releases, cookies generated by the SignedCookieSessionFactory are not. See
https://github.com/Pylons/pyramid/pull/1142

Documentation Enhancements

• A new documentation chapter named Quick Tour of Pyramid was added. It describes starting out
with Pyramid from a high level.

• Added a Quick Tutorial for Pyramid to go with the Quick Tour

• Many other enhancements.

0.6. Change History 937


The Pyramid Web Framework, Version 1.9.4

Scaffolding Enhancements

• All scaffolds have a new HTML + CSS theme.

• Updated docs and scaffolds to keep in step with new 2.0 release of Lingua. This included removing
all setup.cfg files from scaffolds and documentation environments.

Dependency Changes

• Pyramid no longer depends upon Mako or Chameleon.

• Pyramid now depends on WebOb>=1.3 (it uses webob.cookies.CookieProfile from 1.3+).

0.6.4 What’s New in Pyramid 1.4

This article explains the new features in Pyramid version 1.4 as compared to its predecessor, Pyramid
1.3. It also documents backwards incompatibilities between the two versions and deprecations added to
Pyramid 1.4, as well as software dependency changes and notable documentation additions.

Major Feature Additions

The major feature additions in Pyramid 1.4 follow.

Third-Party Predicates

• Third-party custom view, route, and subscriber predicates can now be added for use by
view authors via pyramid.config.Configurator.add_view_predicate(),
pyramid.config.Configurator.add_route_predicate() and pyramid.
config.Configurator.add_subscriber_predicate(). So, for example, doing
this:

config.add_view_predicate('abc', my.package.ABCPredicate)

Might allow a view author to do this in an application that configured that predicate:

938 Contents
The Pyramid Web Framework, Version 1.9.4

@view_config(abc=1)

Similar features exist for pyramid.config.Configurator.add_route(), and


pyramid.config.Configurator.add_subscriber(). See Adding a Third Party
View, Route, or Subscriber Predicate for more information.

Easy Custom JSON Serialization

• Views can now return custom objects which will be serialized to JSON by a JSON renderer by
defining a __json__ method on the object’s class. This method should return values natively
serializable by json.dumps (such as ints, lists, dictionaries, strings, and so forth). See Serializing
Custom Objects for more information. The JSON renderer now also allows for the definition of
custom type adapters to convert unknown objects to JSON serializations, in case you can’t add a
__json__ method to returned objects.

Partial Mako and Chameleon Template Renderings

• The Mako renderer now supports using a def name in an asset spec. When the def name is present
in the asset spec, the system will render the template named def within the template instead of
rendering the entire template. An example asset spec which names a def is package:path/to/
template#defname.mako. This will render the def named defname inside the template.
mako template instead of rendering the entire template. The old way of returning a tuple in the form
('defname', {}) from the view is supported for backward compatibility.

• The Chameleon ZPT renderer now supports using a macro name in an asset spec. When the macro
name is present in the asset spec, the system will render the macro listed as a define-macro and
return the result instead of rendering the entire template. An example asset spec: package:path/
to/template#macroname.pt. This will render the macro defined as macroname within the
template.pt template instead of the entire template.

Subrequest Support

• Developers may invoke a subrequest by using the pyramid.request.Request.


invoke_subrequest() API. This allows a developer to obtain a response from one view
callable by issuing a subrequest from within a different view callable. See Invoking a Subrequest
for more information.

0.6. Change History 939


The Pyramid Web Framework, Version 1.9.4

Minor Feature Additions

• pyramid.authentication.AuthTktAuthenticationPolicy has been updated to


support newer hashing algorithms such as sha512. Existing applications should consider updating
if possible for improved security over the default md5 hashing.

• pyramid.config.Configurator.add_directive() now accepts arbitrary callables


like partials or objects implementing __call__ which don’t have __name__ and __doc__
attributes. See https://github.com/Pylons/pyramid/issues/621 and https://github.com/Pylons/
pyramid/pull/647.

• As of this release, the request_method view/route predicate, when


used, will also imply that HEAD is implied when you use GET. For ex-
ample, using @view_config(request_method='GET') is equivalent
to using @view_config(request_method=('GET', 'HEAD')). Using
@view_config(request_method=('GET', 'POST') is equivalent to using
@view_config(request_method=('GET', 'HEAD', 'POST'). This is because
HEAD is a variant of GET that omits the body, and WebOb has special support to return an empty
body when a HEAD is used.

• pyramid.config.Configurator.add_request_method() has been intro-


duced to support extending request objects with arbitrary callables. This method ex-
pands on the now documentation-deprecated pyramid.config.Configurator.
set_request_property() by supporting methods as well as properties. This method also
causes less code to be executed at request construction time than set_request_property().

• The static view machinery now raises rather than returns pyramid.httpexceptions.
HTTPNotFound and pyramid.httpexceptions.HTTPMovedPermanently excep-
tions, so these can be caught by the Not Found View (and other exception views).

• When there is a predicate mismatch exception (seen when no view matches for a given request due
to predicates not working), the exception now contains a textual description of the predicate which
didn’t match.

• An pyramid.config.Configurator.add_permission() directive method was added


to the Configurator. This directive registers a free-standing permission introspectable into the Pyra-
mid introspection system. Frameworks built atop Pyramid can thus use the permissions intro-
spectable category data to build a comprehensive list of permissions supported by a running system.
Before this method was added, permissions were already registered in this introspectable category
as a side effect of naming them in an pyramid.config.Configurator.add_view() call,
this method just makes it possible to arrange for a permission to be put into the permissions in-
trospectable category without naming it along with an associated view. Here’s an example of usage
of add_permission:

940 Contents
The Pyramid Web Framework, Version 1.9.4

config = Configurator()
config.add_permission('view')

• The pyramid.session.UnencryptedCookieSessionFactoryConfig() function


now accepts signed_serialize and signed_deserialize hooks which may be used to
influence how the sessions are marshalled (by default this is done with HMAC+pickle).

• pyramid.testing.DummyRequest now supports methods supplied by the pyramid.


util.InstancePropertyMixin class such as set_property.

• Request properties and methods added via pyramid.config.Configurator.


add_request_method() or pyramid.config.Configurator.
set_request_property() are now available to tweens.

• Request properties and methods added via pyramid.config.Configurator.


add_request_method() or pyramid.config.Configurator.
set_request_property() are now available in the request object returned from pyramid.
paster.bootstrap().

• request.context of environment request during pyramid.paster.bootstrap() is now


the root object if a context isn’t already set on a provided request.

• pyramid.decorator.reify is now an API, and was added to the API documentation.

• Added the pyramid.testing.testConfig() context manager, which can be used to gener-


ate a configurator in a test, e.g. with testing.testConfig(...):.

• A new pyramid.session.check_csrf_token() convenience API function was added.

• A check_csrf view predicate was added. For example, you can now do config.
add_view(someview, check_csrf=True). When the predicate is checked, if the
csrf_token value in request.params matches the csrf token in the request’s session, the
view will be permitted to execute. Otherwise, it will not be permitted to execute.

• Add Base.metadata.bind = engine to alchemy scaffold, so that tables defined impera-


tively will work.

• Comments with references to documentation sections placed in scaffold .ini files.

• Allow multiple values to be specified to the request_param view/route predicate as a sequence.


Previously only a single string value was allowed. See https://github.com/Pylons/pyramid/pull/705

0.6. Change History 941


The Pyramid Web Framework, Version 1.9.4

• Added an HTTP Basic authentication policy at pyramid.authentication.


BasicAuthAuthenticationPolicy.

• The pyramid.config.Configurator.testing_securitypolicy() method now re-


turns the policy object it creates.

• The DummySecurityPolicy created by pyramid.config.Configurator.


testing_securitypolicy() now sets a forgotten value on the policy (the value
True) when its forget method is called.

• The DummySecurityPolicy created by pyramid.config.Configurator.


testing_securitypolicy() now sets a remembered value on the policy, which is
the value of the principal argument it’s called with when its remember method is called.

• New physical_path view predicate. If specified, this value should be a string or a tuple
representing the physical traversal path of the context found via traversal for this predicate to
match as true. For example: physical_path='/' or physical_path='/a/b/c' or
physical_path=('', 'a', 'b', 'c'). It’s useful when you want to always potentially
show a view when some object is traversed to, but you can’t be sure about what kind of object it will
be, so you can’t use the context predicate.

• Added an effective_principals route and view predicate.

• Do not allow the userid returned from the pyramid.security.


authenticated_userid() or the userid that is one of the list of principals returned by
pyramid.security.effective_principals() to be either of the strings system.
Everyone or system.Authenticated when any of the built-in authorization policies that
live in pyramid.authentication are in use. These two strings are reserved for internal usage
by Pyramid and they will no longer be accepted as valid userids.

• Allow a _depth argument to pyramid.view.view_config, which will permit limited com-


position reuse of the decorator by other software that wants to provide custom decorators that are
much like view_config.

• Allow an iterable of decorators to be passed to pyramid.config.Configurator.


add_view(). This allows views to be wrapped by more than one decorator without requiring
combining the decorators yourself.

• pyramid.security.view_execution_permitted() used to return True if no view


could be found. It now raises a TypeError exception in that case, as it doesn’t make sense to assert
that a nonexistent view is execution-permitted. See https://github.com/Pylons/pyramid/issues/299.

942 Contents
The Pyramid Web Framework, Version 1.9.4

• Small microspeed enhancement which anticipates that a pyramid.response.Response ob-


ject is likely to be returned from a view. Some code is shortcut if the class of the object returned by
a view is this class. A similar microoptimization was done to pyramid.request.Request.
is_response().

• Make it possible to use variable arguments on all p* commands (pserve, pshell, pviews, etc)
in the form a=1 b=2 so you can fill in values in parameterized .ini file, e.g. pshell etc/
development.ini http_port=8080.

• In order to allow people to ignore unused arguments to subscriber callables and to normalize the
relationship between event subscribers and subscriber predicates, we now allow both subscribers
and subscriber predicates to accept only a single event argument even if they’ve been subscribed
for notifications that involve multiple interfaces.

Backwards Incompatibilities

• The Pyramid router no longer adds the values bfg.routes.route or bfg.routes.


matchdict to the request’s WSGI environment dictionary. These values were docs-deprecated
in repoze.bfg 1.0 (effectively seven minor releases ago). If your code depended on these values,
use request.matched_route and request.matchdict instead.

• It is no longer possible to pass an environ dictionary directly to pyramid.traversal.


ResourceTreeTraverser.__call__ (aka ModelGraphTraverser.__call__). In-
stead, you must pass a request object. Passing an environment instead of a request has generated a
deprecation warning since Pyramid 1.1.

• Pyramid will no longer work properly if you use the webob.request.LegacyRequest as a


request factory. Instances of the LegacyRequest class have a request.path_info which re-
turn a string. This Pyramid release assumes that request.path_info will unconditionally be
Unicode.

• The functions from pyramid.chameleon_zpt and pyramid.chameleon_text


named get_renderer, get_template, render_template, and
render_template_to_response have been removed. These have issued a depreca-
tion warning upon import since Pyramid 1.0. Use pyramid.renderers.get_renderer(),
pyramid.renderers.get_renderer().implementation(), pyramid.
renderers.render() or pyramid.renderers.render_to_response() re-
spectively instead of these functions.

• The pyramid.configuration module was removed. It had been deprecated since Pyramid
1.0 and printed a deprecation warning upon its use. Use pyramid.config instead.

0.6. Change History 943


The Pyramid Web Framework, Version 1.9.4

• The pyramid.paster.PyramidTemplate API was removed. It had been deprecated since


Pyramid 1.1 and issued a warning on import. If your code depended on this, adjust your code to
import pyramid.scaffolds.PyramidTemplate instead.

• The pyramid.settings.get_settings() API was removed. It had been printing a


deprecation warning since Pyramid 1.0. If your code depended on this API, use pyramid.
threadlocal.get_current_registry().settings instead or use the settings at-
tribute of the registry available from the request (request.registry.settings).

• These APIs from the pyramid.testing module were removed. They have been printing depre-
cation warnings since Pyramid 1.0:

– registerDummySecurityPolicy, use pyramid.config.Configurator.


testing_securitypolicy() instead.

– registerResources (aka registerModels), use pyramid.config.


Configurator.testing_resources() instead.

– registerEventListener, use pyramid.config.Configurator.


testing_add_subscriber() instead.

– registerTemplateRenderer (aka registerDummyRenderer), use pyramid.


config.Configurator.testing_add_renderer() instead.

– registerView, use pyramid.config.Configurator.add_view() instead.

– registerUtility, use pyramid.config.Configurator.registry.


registerUtility() instead.

– registerAdapter, use pyramid.config.Configurator.registry.


registerAdapter() instead.

– registerSubscriber, use pyramid.config.Configurator.


add_subscriber() instead.

– registerRoute, use pyramid.config.Configurator.add_route() instead.

– registerSettings, use pyramid.config.Configurator.add_settings()


instead.

• In Pyramid 1.3 and previous, the __call__ method of a Response object returned by a view was
invoked before any finished callbacks were executed. As of this release, the __call__ method
of a Response object is invoked after finished callbacks are executed. This is in support of the
pyramid.request.Request.invoke_subrequest() feature.

944 Contents
The Pyramid Web Framework, Version 1.9.4

Deprecations

• The pyramid.config.Configurator.set_request_property() directive has been


documentation-deprecated. The method remains usable but the more featureful pyramid.
config.Configurator.add_request_method() should be used in its place (it has all
of the same capabilities but can also extend the request object with methods).

• pyramid.authentication.AuthTktAuthenticationPolicy will emit a deprecation


warning if an application is using the policy without explicitly passing a hashalg argument. This
is because the default is ”md5” which is considered theoretically subject to collision attacks. If you
really want ”md5” then you must specify it explicitly to get rid of the warning.

Documentation Enhancements

• Added an Upgrading Pyramid chapter to the narrative documentation. It describes how to cope
with deprecations and removals of Pyramid APIs and how to show Pyramid-generated deprecation
warnings while running tests and while running a server.

• Added a Invoking a Subrequest chapter to the narrative documentation.

• All of the tutorials that use pyramid.authentication.


AuthTktAuthenticationPolicy now explicitly pass sha512 as a hashalg argument.

• Many cleanups and improvements to narrative and API docs.

Dependency Changes

• Pyramid now requires WebOb 1.2b3+ (the prior Pyramid release only relied on 1.2dev+). This is to
ensure that we obtain a version of WebOb that returns request.path_info as text.

0.6.5 What’s New in Pyramid 1.3

This article explains the new features in Pyramid version 1.3 as compared to its predecessor, Pyramid
1.2. It also documents backwards incompatibilities between the two versions and deprecations added to
Pyramid 1.3, as well as software dependency changes and notable documentation additions.

0.6. Change History 945


The Pyramid Web Framework, Version 1.9.4

Major Feature Additions

The major feature additions in Pyramid 1.3 follow.

Python 3 Compatibility

Pyramid continues to run on Python 2, but Pyramid is now also Python 3 compatible. To use Pyramid
under Python 3, Python 3.3 or better is required.

Many Pyramid add-ons are already Python 3 compatible. For example, pyramid_debugtoolbar,
pyramid_jinja2, pyramid_exclog, pyramid_tm, pyramid_mailer, and
pyramid_handlers are all Python 3-ready. But other add-ons are known to work only under
Python 2. Also, some scaffolding dependencies (particularly ZODB) do not yet work under Python 3.

Please be patient as we gain full ecosystem support for Python 3. You can see more details about ongoing
porting efforts at https://github.com/Pylons/pyramid/wiki/Python-3-Porting .

Python 3 compatibility required dropping some package dependencies and support for older Python ver-
sions and platforms. See the ”Backwards Incompatibilities” section below for more information.

The paster Command Has Been Replaced

We’ve replaced the paster command with Pyramid-specific analogues. Why? The libraries that sup-
ported the paster command named Paste and PasteScript do not run under Python 3, and we
were unwilling to port and maintain them ourselves. As a result, we’ve had to make some changes.

Previously (in Pyramid 1.0, 1.1 and 1.2), you created a Pyramid application using paster create, like
so:

946 Contents
The Pyramid Web Framework, Version 1.9.4

$ $VENV/bin/paster create -t pyramid_starter foo

In 1.3, you’re now instead required to create an application using pcreate like so:

$ $VENV/bin/pcreate -s starter foo

pcreate is required to be used for internal Pyramid scaffolding; externally distributed scaffolding may
allow for both pcreate and/or paster create.

In previous Pyramid versions, you ran a Pyramid application like so:

$ $VENV/bin/paster serve development.ini

Instead, you now must use the pserve command in 1.3:

$ $VENV/bin/pserve development.ini

The ini configuration file format supported by Pyramid has not changed. As a result, Python 2-only users
can install PasteScript manually and use paster serve instead if they like. However, using pserve
will work under both Python 2 and Python 3.

Analogues of paster pshell, paster pviews, paster request and paster ptweens
also exist under the respective console script names pshell, pviews, prequest and ptweens.

paste.httpserver replaced by waitress in Scaffolds

Because the paste.httpserver server we used previously in scaffolds is not Python 3 compatible,
we’ve made the default WSGI server used by Pyramid scaffolding the waitress server. The waitress server
is both Python 2 and Python 3 compatible.

Once you create a project from a scaffold, its development.ini and production.ini will have
the following line:

use = egg:waitress#main

Instead of this (which was the default in older versions):

0.6. Change History 947


The Pyramid Web Framework, Version 1.9.4

use = egg:Paste#http

paste.httpserver ”helped” by converting header values that were Unicode into strings, which
was a feature that subverted the WSGI specification. The waitress server, on the other hand imple-
ments the WSGI spec more fully. This specifically may affect you if you are modifying headers on your
responses. The following error might be an indicator of this problem: AssertionError: Header val-
ues must be strings, please check the type of the header being returned. A common case would be
returning Unicode headers instead of string headers.

Compatibility Helper Library

A new pyramid.compat module was added which provides Python 2/3 straddling support for Pyramid
add-ons and development environments.

Introspection

A configuration introspection system was added; see Pyramid Configuration Introspection and Adding
Configuration Introspection for more information on using the introspection system as a developer.

The latest release of the pyramid debug toolbar (0.9.7+) provides an ”Introspection” panel that exposes
introspection information to a Pyramid application developer.

New APIs were added to support introspection pyramid.registry.Introspectable,


pyramid.config.Configurator.introspector, pyramid.config.Configurator.
introspectable, pyramid.registry.Registry.introspector.

@view_defaults Decorator

If you use a class as a view, you can use the new pyramid.view.view_defaults class decorator
on the class to provide defaults to the view configuration information used by every @view_config
decorator that decorates a method of that class.

For instance, if you’ve got a class that has methods that represent ”REST actions”, all which are mapped
to the same route, but different request methods, instead of this:

948 Contents
The Pyramid Web Framework, Version 1.9.4

1 from pyramid.view import view_config


2 from pyramid.response import Response
3

4 class RESTView(object):
5 def __init__(self, request):
6 self.request = request
7

8 @view_config(route_name='rest', request_method='GET')
9 def get(self):
10 return Response('get')
11

12 @view_config(route_name='rest', request_method='POST')
13 def post(self):
14 return Response('post')
15

16 @view_config(route_name='rest', request_method='DELETE')
17 def delete(self):
18 return Response('delete')

You can do this:

1 from pyramid.view import view_defaults


2 from pyramid.view import view_config
3 from pyramid.response import Response
4

5 @view_defaults(route_name='rest')
6 class RESTView(object):
7 def __init__(self, request):
8 self.request = request
9

10 @view_config(request_method='GET')
11 def get(self):
12 return Response('get')
13

14 @view_config(request_method='POST')
15 def post(self):
16 return Response('post')
17

18 @view_config(request_method='DELETE')
19 def delete(self):
20 return Response('delete')

0.6. Change History 949


The Pyramid Web Framework, Version 1.9.4

This also works for imperative view configurations that involve a class.

See @view_defaults Class Decorator for more information.

Extending a Request without Subclassing

It is now possible to extend a pyramid.request.Request object with property descriptors without


having to create a custom request factory. The new method pyramid.config.Configurator.
set_request_property() provides an entry point for addons to register properties which will be
added to each request. New properties may be reified, effectively caching the return value for the lifetime
of the instance. Common use-cases for this would be to get a database connection for the request or
identify the current user. The new method pyramid.request.Request.set_property() has
been added, as well, but the configurator method should be preferred as it provides conflict detection and
consistency in the lifetime of the properties.

Not Found and Forbidden View Helpers

Not Found helpers:

• New API: pyramid.config.Configurator.add_notfound_view(). This is a wrap-


per for pyramid.config.Configurator.add_view() which provides support for an ”ap-
pend_slash” feature as well as doing the right thing when it comes to permissions (a Not Found
View should always be public). It should be preferred over calling add_view directly with
context=HTTPNotFound as was previously recommended.

• New API: pyramid.view.notfound_view_config. This is a decorator construc-


tor like pyramid.view.view_config that calls pyramid.config.Configurator.
add_notfound_view() when scanned. It should be preferred over using pyramid.view.
view_config with context=HTTPNotFound as was previously recommended.

Forbidden helpers:

• New API: pyramid.config.Configurator.add_forbidden_view(). This is


a wrapper for pyramid.config.Configurator.add_view() which does the right
thing about permissions. It should be preferred over calling add_view directly with
context=HTTPForbidden as was previously recommended.

• New API: pyramid.view.forbidden_view_config. This is a decorator construc-


tor like pyramid.view.view_config that calls pyramid.config.Configurator.
add_forbidden_view() when scanned. It should be preferred over using pyramid.view.
view_config with context=HTTPForbidden as was previously recommended.

950 Contents
The Pyramid Web Framework, Version 1.9.4

Minor Feature Additions

• New APIs: pyramid.path.AssetResolver and pyramid.path.


DottedNameResolver. The former can be used to resolve an asset specification to an
API that can be used to read the asset’s data, the latter can be used to resolve a dotted Python name
to a module or a package.

• A mako.directories setting is no longer required to use Mako templates Rationale: Mako


template renderers can be specified using an absolute asset spec. An entire application can be written
with such asset specs, requiring no ordered lookup path.

• bpython interpreter compatibility in pshell. See Alternative Shells for more information.

• Added pyramid.paster.get_appsettings() API function. This function returns the set-


tings defined within an [app:...] section in a PasteDeploy ini file.

• Added pyramid.paster.setup_logging() API function. This function sets up Python


logging according to the logging configuration in a PasteDeploy ini file.

• Configuration conflict reporting is reported in a more understandable way (”Line 11 in file...” vs. a
repr of a tuple of similar info).

• We allow extra keyword arguments to be passed to the pyramid.config.Configurator.


action() method.

• Responses generated by Pyramid’s pyramid.static.static_view now


use a wsgi.file_wrapper (see http://www.python.org/dev/peps/pep-0333/
#optional-platform-specific-file-handling) when one is provided by the web server.

• The pyramid.config.Configurator.scan() method can be passed an ignore argu-


ment, which can be a string, a callable, or a list consisting of strings and/or callables. This feature al-
lows submodules, subpackages, and global objects from being scanned. See http://readthedocs.org/
docs/venusian/en/latest/#ignore-scan-argument for more information about how to use the ignore
argument to scan.

• Add pyramid.config.Configurator.add_traverser() API method. See Changing


the Traverser for more information. This is not a new feature, it just provides an API for adding a
traverser without needing to use the ZCA API.

• Add pyramid.config.Configurator.add_resource_url_adapter() API


method. See Changing How pyramid.request.Request.resource_url() Generates a URL for more
information. This is not a new feature, it just provides an API for adding a resource url adapter
without needing to use the ZCA API.

0.6. Change History 951


The Pyramid Web Framework, Version 1.9.4

• Better error messages when a view callable returns a value that cannot be converted to a response
(for example, when a view callable returns a dictionary without a renderer defined, or doesn’t return
any value at all). The error message now contains information about the view callable itself as well
as the result of calling it.

• Better error message when a .pyc-only module is config.include -ed. This is not permitted due
to error reporting requirements, and a better error message is shown when it is attempted. Previously
it would fail with something like ”AttributeError: ’NoneType’ object has no attribute ’rfind’”.

• The system value req is now supplied to renderers as an alias for request. This means that
you can now, for example, in a template, do req.route_url(...) instead of request.
route_url(...). This is purely a change to reduce the amount of typing required to use request
methods and attributes from within templates. The value request is still available too, this is just
an alternative.

• A new interface was added: pyramid.interfaces.IResourceURL. An adapter implement-


ing its interface can be used to override resource URL generation when pyramid.request.
Request.resource_url() is called. This interface replaces the now-deprecated pyramid.
interfaces.IContextURL interface.

• The dictionary passed to a resource’s __resource_url__ method (see Overriding Resource


URL Generation) now contains an app_url key, representing the application URL generated dur-
ing pyramid.request.Request.resource_url(). It represents a potentially customized
URL prefix, containing potentially custom scheme, host and port information passed by the user
to request.resource_url. It should be used instead of request.application_url
where necessary.

• The pyramid.request.Request.resource_url() API now accepts these arguments:


app_url, scheme, host, and port. The app_url argument can be used to replace the URL
prefix wholesale during url generation. The scheme, host, and port arguments can be used to
replace the respective default values of request.application_url partially.

• A new API named pyramid.request.Request.resource_path() now exists. It works


like pyramid.request.Request.resource_url() but produces a relative URL rather
than an absolute one.

• The pyramid.request.Request.route_url() API now accepts these arguments:


_app_url, _scheme, _host, and _port. The _app_url argument can be used to replace
the URL prefix wholesale during url generation. The _scheme, _host, and _port arguments
can be used to replace the respective default values of request.application_url partially.

• New APIs: pyramid.response.FileResponse and pyramid.response.FileIter,


for usage in views that must serve files ”manually”.

952 Contents
The Pyramid Web Framework, Version 1.9.4

Backwards Incompatibilities

• Pyramid no longer runs on Python 2.5. This includes the most recent release of Jython and the
Python 2.5 version of Google App Engine.

The reason? We could not easily ”straddle” Python 2 and 3 versions and support Python 2 versions
older than Python 2.6. You will need Python 2.6 or better to run this version of Pyramid. If you
need to use Python 2.5, you should use the most recent 1.2.X release of Pyramid.

• The names of available scaffolds have changed and the flags supported by pcreate are different
than those that were supported by paster create. For example, pyramid_alchemy is now
just alchemy.

• The paster command is no longer the documented way to create projects, start the server, or
run debugging commands. To create projects from scaffolds, paster create is replaced by
the pcreate console script. To serve up a project, paster serve is replaced by the pserve
console script. New console scripts named pshell, pviews, proutes, and ptweens do what
their paster <commandname> equivalents used to do. All relevant narrative documentation has
been updated. Rationale: the Paste and PasteScript packages do not run under Python 3.

• The default WSGI server run as the result of pserve from newly rendered scaffolding is now the
waitress WSGI server instead of the paste.httpserver server. Rationale: the Paste and
PasteScript packages do not run under Python 3.

• The pshell command (see ”paster pshell”) no longer accepts a --disable-ipython


command-line argument. Instead, it accepts a -p or --python-shell argument, which can
be any of the values python, ipython or bpython.

• Removed the pyramid.renderers.renderer_from_name function. It has been depre-


cated since Pyramid 1.0, and was never an API.

• To use ZCML with versions of Pyramid >= 1.3, you will need pyramid_zcml version >= 0.8
and zope.configuration version >= 3.8.0. The pyramid_zcml package version 0.8 is
backwards compatible all the way to Pyramid 1.0, so you won’t be warned if you have older versions
installed and upgrade Pyramid itself ”in-place”; it may simply break instead (particularly if you use
ZCML’s includeOverrides directive).

• String values passed to pyramid.request.Request.route_url() or pyramid.


request.Request.route_path() that are meant to replace ”remainder” matches will now
be URL-quoted except for embedded slashes. For example:

0.6. Change History 953


The Pyramid Web Framework, Version 1.9.4

config.add_route('remain', '/foo*remainder')
request.route_path('remain', remainder='abc / def')
# -> '/foo/abc%20/%20def'

Previously string values passed as remainder replacements were tacked on untouched, without any
URL-quoting. But this doesn’t really work logically if the value passed is Unicode (raw unicode
cannot be placed in a URL or in a path) and it is inconsistent with the rest of the URL generation
machinery if the value is a string (it won’t be quoted unless by the caller).

Some folks will have been relying on the older behavior to tack on query string elements and anchor
portions of the URL; sorry, you’ll need to change your code to use the _query and/or _anchor
arguments to route_path or route_url to do this now.

• If you pass a bytestring that contains non-ASCII characters to pyramid.config.


Configurator.add_route() as a pattern, it will now fail at startup time. Use Unicode
instead.

• The path_info route and view predicates now match against request.upath_info (Uni-
code) rather than request.path_info (indeterminate value based on Python 3 vs. Python 2).
This has to be done to normalize matching on Python 2 and Python 3.

• The match_param view predicate no longer accepts a dict. This will have no negative affect
because the implementation was broken for dict-based arguments.

• The pyramid.interfaces.IContextURL interface has been deprecated. People have been


instructed to use this to register a resource url adapter in the ”Hooks” chapter to use to influence
pyramid.request.Request.resource_url() URL generation for resources found via
custom traversers since Pyramid 1.0.

The interface still exists and registering an adapter using it as documented in older ver-
sions still works, but this interface will be removed from the software after a few ma-
jor Pyramid releases. You should replace it with an equivalent pyramid.interfaces.
IResourceURL adapter, registered using the new pyramid.config.Configurator.
add_resource_url_adapter() API. A deprecation warning is now emitted when
a pyramid.interfaces.IContextURL adapter is found when pyramid.request.
Request.resource_url() is called.

• Remove pyramid.config.Configurator.with_context class method. It was never an


API, it is only used by pyramid_zcml and its functionality has been moved to that package’s
latest release. This means that you’ll need to use the 0.9.2 or later release of pyramid_zcml with
this release of Pyramid.

954 Contents
The Pyramid Web Framework, Version 1.9.4

• The older deprecated set_notfound_view Configurator method is now an alias for


the new add_notfound_view Configurator method. Likewise, the older deprecated
set_forbidden_view is now an alias for the new add_forbidden_view Config-
urator method. This has the following impact: the context sent to views with
a (context, request) call signature registered via the set_notfound_view or
set_forbidden_view will now be an exception object instead of the actual resource con-
text found. Use request.context to get the actual resource context. It’s also recom-
mended to disuse set_notfound_view in favor of add_notfound_view, and disuse
set_forbidden_view in favor of add_forbidden_view despite the aliasing.

Deprecations

• The API documentation for pyramid.view.append_slash_notfound_view and


pyramid.view.AppendSlashNotFoundViewFactory was removed. These names
still exist and are still importable, but they are no longer APIs. Use pyramid.config.
Configurator.add_notfound_view(append_slash=True) or pyramid.view.
notfound_view_config(append_slash=True) to get the same behavior.

• The set_forbidden_view and set_notfound_view methods of the Configurator were


removed from the documentation. They have been deprecated since Pyramid 1.1.

• All references to the tmpl_context request variable were removed from the docs. Its existence in
Pyramid is confusing for people who were never Pylons users. It was added as a porting convenience
for Pylons users in Pyramid 1.0, but it never caught on because the Pyramid rendering system is a
lot different than Pylons’ was, and alternate ways exist to do what it was designed to offer in Pylons.
It will continue to exist ”forever” but it will not be recommended or mentioned in the docs.

• Remove references to do-nothing pyramid.debug_templates setting in all Pyramid-provided


.ini files. This setting previously told Chameleon to render better exceptions; now Chameleon always
renders nice exceptions regardless of the value of this setting.

Known Issues

• As of this writing (the release of Pyramid 1.3b2), if you attempt to install a Pyramid project that
used the alchemy scaffold via setup.py develop on Python 3.2, it will quit with an in-
stallation error while trying to install Pygments. If this happens, please just rerun the setup.
py develop command again, and it will complete successfully. This is due to a minor bug in
SQLAlchemy 0.7.5 under Python 3, and has been fixed in a later SQLAlchemy release. Keep an eye
on http://www.sqlalchemy.org/trac/ticket/2421

0.6. Change History 955


The Pyramid Web Framework, Version 1.9.4

Documentation Enhancements

• The SQLAlchemy + URL dispatch wiki tutorial has been updated. It now uses @view_config
decorators and an explicit database population script.

• Minor updates to the ZODB + Traversal Wiki Tutorial.

• A narrative documentation chapter named Extending Pyramid Configuration was added; it de-
scribes how to add a custom configuration directive, and how use the pyramid.config.
Configurator.action() method within custom directives. It also describes how to add in-
trospectable objects.

• A narrative documentation chapter named Pyramid Configuration Introspection was added. It de-
scribes how to query the introspection system.

• Added an API docs chapter for pyramid.scaffolds.

• Added a narrative docs chapter named Creating Pyramid Scaffolds.

• Added a description of the prequest command-line script at Invoking a Request.

• Added a section to the ”Command-Line Pyramid” chapter named Making Your Script into a Console
Script.

• Removed the ”Running Pyramid on Google App Engine” tutorial from the main docs. It survives
on in the Pyramid Community Cookbook as Pyramid on Google’s App Engine (using appengine-
monkey). Rationale: it provides the correct info for the Python 2.5 version of GAE only, and this
version of Pyramid does not support Python 2.5.

• Updated the Changing the Forbidden View section, replacing explanations of registering a
view using add_view or view_config with ones using add_forbidden_view or
forbidden_view_config.

• Updated the Changing the Not Found View section, replacing explanations of registering
a view using add_view or view_config with ones using add_notfound_view or
notfound_view_config.

• Updated the Redirecting to Slash-Appended Routes section, replacing explanations of register-


ing a view using add_view or view_config with ones using add_notfound_view or
notfound_view_config

• Updated all tutorials to use pyramid.view.forbidden_view_config rather than


pyramid.view.view_config with an HTTPForbidden context.

956 Contents
The Pyramid Web Framework, Version 1.9.4

Dependency Changes

• Pyramid no longer depends on the zope.component package, except as a testing dependency.

• Pyramid now depends on the following package versions: zope.interface>=3.8.0, WebOb>=1.2dev,


repoze.lru>=0.4, zope.deprecation>=3.5.0, translationstring>=0.4 for Python 3 compatibility pur-
poses. It also, as a testing dependency, depends on WebTest>=1.3.1 for the same reason.

• Pyramid no longer depends on the Paste or PasteScript packages. These packages are not
Python 3 compatible.

• Depend on venusian >= 1.0a3 to provide scan ignore support.

Scaffolding Changes

• Rendered scaffolds have now been changed to be more relocatable (fewer mentions of the package
name within files in the package).

• The routesalchemy scaffold has been renamed alchemy, replacing the older (traversal-based)
alchemy scaffold (which has been retired).

• The alchemy and starter scaffolds are Python 3 compatible.

• The starter scaffold now uses URL dispatch by default.

0.6.6 What’s New in Pyramid 1.2

This article explains the new features in Pyramid version 1.2 as compared to its predecessor, Pyramid
1.1. It also documents backwards incompatibilities between the two versions and deprecations added to
Pyramid 1.2, as well as software dependency changes and notable documentation additions.

Major Feature Additions

The major feature additions in Pyramid 1.2 follow.

0.6. Change History 957


The Pyramid Web Framework, Version 1.9.4

Debug Toolbar

The scaffolding packages that come with Pyramid now include a debug toolbar component which can be
used to interactively debug an application. See The Debug Toolbar for more information.

route_prefix Argument to include

The pyramid.config.Configurator.include() method now accepts a route_prefix ar-


gument. This argument allows you to compose URL dispatch applications together from disparate pack-
ages. See Using a Route Prefix to Compose Applications for more information.

Tweens

A tween is used to wrap the Pyramid router’s primary request handling function. This is a feature that can
be used by Pyramid framework extensions, to provide, for example, view timing support and can provide
a convenient place to hang bookkeeping code. Tweens are a little like WSGI middleware, but have access
to Pyramid functionality such as renderers and a full-featured request object.
To support this feature, a new configurator directive exists named pyramid.config.
Configurator.add_tween(). This directive adds a ”tween”.
Tweens are further described in Registering Tweens.
A new paster command now exists: paster ptweens. This command prints the current tween config-
uration for an application. See the section entitled Displaying ”Tweens” for more info.

Scaffolding Changes

• All scaffolds now use the pyramid_tm package rather than the repoze.tm2 middleware to
manage transaction management.
• The ZODB scaffold now uses the pyramid_zodbconn package rather than the repoze.
zodbconn package to provide ZODB integration.
• All scaffolds now use the pyramid_debugtoolbar package rather than the WebError pack-
age to provide interactive debugging features.
• Projects created via a scaffold no longer depend on the WebError package at all; configuration
in the production.ini file which used to require its error_catcher middleware has been
removed. Configuring error catching / email sending is now the domain of the pyramid_exclog
package (see http://docs.pylonsproject.org/projects/pyramid_exclog/dev/).
• All scaffolds now send the cache_max_age parameter to the add_static_view method.

958 Contents
The Pyramid Web Framework, Version 1.9.4

Minor Feature Additions

• The [pshell] section in an ini configuration file now treats a setup key as a dotted name that
points to a callable that is passed the bootstrap environment. It can mutate the environment as
necessary during a paster pshell session. This feature is described in Writing a Script.

• A new configuration setting named pyramid.includes is now available. It is described in


Including Packages.

• Added a pyramid.security.NO_PERMISSION_REQUIRED constant for use in


permission= statements to view configuration. This constant has a value of the string
__no_permission_required__. This string value was previously referred to in documenta-
tion; now the documentation uses the constant.

• Added a decorator-based way to configure a response adapter: pyramid.response.


response_adapter. This decorator has the same use as pyramid.config.
Configurator.add_response_adapter() but it’s declarative.

• The pyramid.events.BeforeRender event now has an attribute named rendering_val.


This can be used to introspect the value returned by a view in a BeforeRender subscriber.

• The Pyramid debug logger now uses the standard logging configuration (usually set up
by Paste as part of startup). This means that output from e.g. debug_notfound,
debug_authorization, etc. will go to the normal logging channels. The logger name of the
debug logger will be the package name of the caller of the Configurator’s constructor.

• A new attribute is available on request objects: exc_info. Its value will be None until an excep-
tion is caught by the Pyramid router, after which it will be the result of sys.exc_info().

• pyramid.testing.DummyRequest now implements the add_finished_callback and


add_response_callback methods implemented by pyramid.request.Request.

• New methods of the pyramid.config.Configurator class:


set_authentication_policy() and set_authorization_policy(). These
are meant to be consumed mostly by add-on authors who wish to offer packages which register
security policies.

• New Configurator method: pyramid.config.Configurator.set_root_factory(),


which can set the root factory after the Configurator has been constructed.

• Pyramid no longer eagerly commits some default configuration statements at Configu-


rator construction time, which permits values passed in as constructor arguments (e.g.
authentication_policy and authorization_policy) to override the same settings ob-
tained via the pyramid.config.Configurator.include() method.

0.6. Change History 959


The Pyramid Web Framework, Version 1.9.4

• Better Mako rendering exceptions; the template line which caused the error is now shown when a
Mako rendering raises an exception.

• New request methods: current_route_url(), current_route_path(), and


static_path().

• New functions in the pyramid.url module: current_route_path() and


static_path().

• The pyramid.request.Request.static_url() API (and its brethren pyramid.


request.Request.static_path(), pyramid.url.static_url(), and pyramid.
url.static_path()) now accept an absolute filename as a ”path” argument. This will generate
a URL to an asset as long as the filename is in a directory which was previously registered as a static
view. Previously, trying to generate a URL to an asset using an absolute file path would raise a
ValueError.

• The RemoteUserAuthenticationPolicy, AuthTktAuthenticationPolicy, and


SessionAuthenticationPolicy constructors now accept an additional keyword argument
named debug. By default, this keyword argument is False. When it is True, debug information
will be sent to the Pyramid debug logger (usually on stderr) when the authenticated_userid
or effective_principals method is called on any of these policies. The output produced
can be useful when trying to diagnose authentication-related problems.

• New view predicate: match_param. Example: a view added via config.add_view(aview,


match_param='action=edit') will be called only when the request.matchdict has
a value inside it named action with a value of edit.

• Support an onerror keyword argument to pyramid.config.Configurator.scan().


This argument is passed to venusian.Scanner.scan() to influence error behavior when an
exception is raised during scanning.

• The request_method predicate argument to pyramid.config.Configurator.


add_view() and pyramid.config.Configurator.add_route() is now permitted to
be a tuple of HTTP method names. Previously it was restricted to being a string representing a
single HTTP method name.

• Undeprecated pyramid.traversal.find_model, pyramid.traversal.


model_path, pyramid.traversal.model_path_tuple, and pyramid.url.
model_url, which were all deprecated in Pyramid 1.0. There’s just not much cost to keeping
them around forever as aliases to their renamed resource_* prefixed functions.

• Undeprecated pyramid.view.bfg_view, which was deprecated in Pyramid 1.0. This is a low-


cost alias to pyramid.view.view_config which we’ll just keep around forever.

• Route pattern replacement marker names can now begin with an underscore. See https://github.com/
Pylons/pyramid/issues/276.

960 Contents
The Pyramid Web Framework, Version 1.9.4

Deprecations

• All Pyramid-related deployment settings (e.g. debug_all, debug_notfound) are now meant to
be prefixed with the prefix pyramid.. For example: debug_all -> pyramid.debug_all.
The old non-prefixed settings will continue to work indefinitely but supplying them may print a
deprecation warning. All scaffolds and tutorials have been changed to use prefixed settings.

• The deployment settings dictionary now raises a deprecation warning when you attempt to access its
values via __getattr__ instead of via __getitem__.

Backwards Incompatibilities

• If a string is passed as the debug_logger parameter to a Configurator, that string is considered


to be the name of a global Python logger rather than a dotted name to an instance of a logger.

• The pyramid.config.Configurator.include() method now accepts only a single


callable argument. A sequence of callables used to be permitted. If you are passing more than
one callable to pyramid.config.Configurator.include(), it will break. You now
must now instead make a separate call to the method for each callable.

• It may be necessary to more strictly order configuration route and view statements when using an
”autocommitting” Configurator. In the past, it was possible to add a view which named a route name
before adding a route with that name when you used an autocommitting configurator. For example:

config = Configurator(autocommit=True)
config.add_view('my.pkg.someview', route_name='foo')
config.add_route('foo', '/foo')

The above will raise an exception when the view attempts to add itself. Now you must add the route
before adding the view:

config = Configurator(autocommit=True)
config.add_route('foo', '/foo')
config.add_view('my.pkg.someview', route_name='foo')

This won’t effect ”normal” users, only people who have legacy BFG codebases that used an autom-
mitting configurator and possibly tests that use the configurator API (the configurator returned by
pyramid.testing.setUp() is an autocommitting configurator). The right way to get around
this is to use a default non-autocommitting configurator, which does not have these directive ordering
requirements:

0.6. Change History 961


The Pyramid Web Framework, Version 1.9.4

config = Configurator()
config.add_view('my.pkg.someview', route_name='foo')
config.add_route('foo', '/foo')

The above will work fine.

• The pyramid.config.Configurator.add_route() directive no longer returns a route


object. This change was required to make route vs. view configuration processing work properly.

Behavior Differences

• An ETag header is no longer set when serving a static file. A Last-Modified header is set instead.
• Static file serving no longer supports the wsgi.file_wrapper extension.
• Instead of returning a 403 Forbidden error when a static file is served that cannot be accessed
by the Pyramid process’ user due to file permissions, an IOError (or similar) will be raised.

Documentation Enhancements

• Narrative and API documentation which used the route_url, route_path, resource_url,
static_url, and current_route_url functions in the pyramid.url package have now
been changed to use eponymous methods of the request instead.
• Added a section entitled Using a Route Prefix to Compose Applications to the ”URL Dispatch”
narrative documentation chapter.
• Added a new module to the API docs: pyramid.tweens.
• Added a Registering Tweens section to the ”Hooks” narrative chapter.
• Added a Displaying ”Tweens” section to the ”Command-Line Pyramid” narrative chapter.
• Added documentation for Explicit Tween Configuration and Including Packages to the ”Environment
Variables and .ini Files Settings” chapter.
• Added a Logging chapter to the narrative docs.
• All tutorials now use - The route_url, route_path, resource_url, static_url, and
current_route_url methods of the pyramid.request.Request rather than the func-
tion variants imported from pyramid.url.
• The ZODB wiki tutorial now uses the pyramid_zodbconn package rather than the repoze.
zodbconn package to provide ZODB integration.
• Added What makes Pyramid unique to the Introduction narrative chapter.

962 Contents
The Pyramid Web Framework, Version 1.9.4

Dependency Changes

• Pyramid now relies on PasteScript >= 1.7.4. This version contains a feature important for allowing
flexible logging configuration.

• Pyramid now requires Venusian 1.0a1 or better to support the onerror keyword argument to
pyramid.config.Configurator.scan().

• The zope.configuration package is no longer a dependency.

0.6.7 What’s New in Pyramid 1.1

This article explains the new features in Pyramid version 1.1 as compared to its predecessor, Pyramid
1.0. It also documents backwards incompatibilities between the two versions and deprecations added to
Pyramid 1.1, as well as software dependency changes and notable documentation additions.

Terminology Changes

The term ”template” used by the Pyramid documentation used to refer to both ”paster templates” and
”rendered templates” (templates created by a rendering engine. i.e. Mako, Chameleon, Jinja, etc.). ”Paster
templates” will now be referred to as ”scaffolds”, whereas the name for ”rendered templates” will remain
as ”templates.”

Major Feature Additions

The major feature additions in Pyramid 1.1 are:

• Support for the request.response attribute.

• New views introspection feature: paster pviews.

• Support for ”static” routes.

• Default HTTP exception view.

• http_cache view configuration parameter causes Pyramid to set HTTP caching headers.

• Features that make it easier to write scripts that work in a Pyramid environment.

0.6. Change History 963


The Pyramid Web Framework, Version 1.9.4

request.response

• Instances of the pyramid.request.Request class now have a response attribute.

The object passed to a view callable as request is an instance of pyramid.request.


Request. request.response is an instance of the class pyramid.response.
Response. View callables that are configured with a renderer will return this response object
to the Pyramid router. Therefore, code in a renderer-using view callable can set response attributes
such as request.response.content_type (before they return, e.g. a dictionary to the ren-
derer) and this will influence the HTTP return value of the view callable.

request.response can also be used in view callable code that is not configured to use a
renderer. For example, a view callable might do request.response.body = '123';
return request.response. However, the response object that is produced by request.
response must be returned when a renderer is not in play in order to have any effect on the HTTP
response (it is not a ”global” response, and modifications to it are not somehow merged into a sepa-
rately returned response object).

The request.response object is lazily created, so its introduction does not negatively impact
performance.

paster pviews

• A new paster command named paster pviews was added. This command prints a summary of
potentially matching views for a given path. See the section entitled Displaying Matching Views for
a Given URL for more information.

Static Routes

• The add_route method of the Configurator now accepts a static argument. If this argument
is True, the added route will never be considered for matching when a request is handled. Instead,
it will only be useful for URL generation via route_url and route_path. See the section
entitled Static Routes for more information.

964 Contents
The Pyramid Web Framework, Version 1.9.4

Default HTTP Exception View

• A default exception view for the interface pyramid.interfaces.IExceptionResponse


is now registered by default. This means that an instance of any exception class imported from
pyramid.httpexceptions (such as HTTPFound) can now be raised from within view code;
when raised, this exception view will render the exception to a response.

To allow for configuration of this feature, the Configurator now accepts an additional keyword argu-
ment named exceptionresponse_view. By default, this argument is populated with a default
exception view function that will be used when an HTTP exception is raised. When None is passed
for this value, an exception view for HTTP exceptions will not be registered. Passing None returns
the behavior of raising an HTTP exception to that of Pyramid 1.0 (the exception will propagate to
middleware and to the WSGI server).

http_cache

A new value http_cache can be used as a view configuration parameter.

When you supply an http_cache value to a view configuration, the Expires and Cache-Control
headers of a response generated by the associated view callable are modified. The value for http_cache
may be one of the following:

• A nonzero integer. If it’s a nonzero integer, it’s treated as a number of seconds. This number of
seconds will be used to compute the Expires header and the Cache-Control: max-age pa-
rameter of responses to requests which call this view. For example: http_cache=3600 instructs
the requesting browser to ’cache this response for an hour, please’.

• A datetime.timedelta instance. If it’s a datetime.timedelta instance, it will be con-


verted into a number of seconds, and that number of seconds will be used to compute the Expires
header and the Cache-Control: max-age parameter of responses to requests which call this
view. For example: http_cache=datetime.timedelta(days=1) instructs the requesting
browser to ’cache this response for a day, please’.

• Zero (0). If the value is zero, the Cache-Control and Expires headers present in all responses
from this view will be composed such that client browser cache (and any intermediate caches) are
instructed to never cache the response.

0.6. Change History 965


The Pyramid Web Framework, Version 1.9.4

• A two-tuple. If it’s a two tuple (e.g. http_cache=(1, {'public':True})), the first value
in the tuple may be a nonzero integer or a datetime.timedelta instance; in either case this
value will be used as the number of seconds to cache the response. The second value in the tuple must
be a dictionary. The values present in the dictionary will be used as input to the Cache-Control
response header. For example: http_cache=(3600, {'public':True}) means ’cache
for an hour, and add public to the Cache-Control header of the response’. All keys and values sup-
ported by the webob.cachecontrol.CacheControl interface may be added to the dictio-
nary. Supplying {'public':True} is equivalent to calling response.cache_control.
public = True.

Providing a non-tuple value as http_cache is equivalent to calling response.


cache_expires(value) within your view’s body.

Providing a two-tuple value as http_cache is equivalent to calling response.


cache_expires(value[0], **value[1]) within your view’s body.

If you wish to avoid influencing, the Expires header, and instead wish to only influence
Cache-Control headers, pass a tuple as http_cache with the first element of None, e.g.: (None,
{'public':True}).

The environment setting PYRAMID_PREVENT_HTTP_CACHE and configuration file value


prevent_http_cache are synonymous and allow you to prevent HTTP cache headers from
being set by Pyramid’s http_cache machinery globally in a process. see Influencing HTTP Caching
and Preventing HTTP Caching.

Easier Scripting Writing

A new API function pyramid.paster.bootstrap() has been added to make writing scripts that
need to work under Pyramid environment easier, e.g.:

from pyramid.paster import bootstrap


info = bootstrap('/path/to/my/development.ini')
request = info['request']
print request.route_url('myroute')

See Writing a Script for more details.

966 Contents
The Pyramid Web Framework, Version 1.9.4

Minor Feature Additions

• It is now possible to invoke paster pshell even if the paste ini file section name pointed to in
its argument is not actually a Pyramid WSGI application. The shell will work in a degraded mode,
and will warn the user. See ”The Interactive Shell” in the ”Creating a Pyramid Project” narrative
documentation section.

• The paster pshell, paster pviews, and paster proutes commands each now under
the hood uses pyramid.paster.bootstrap(), which makes it possible to supply an .ini
file without naming the ”right” section in the file that points at the actual Pyramid application. In-
stead, you can generally just run paster {pshell|proutes|pviews} development.
ini and it will do mostly the right thing.

• It is now possible to add a [pshell] section to your application’s .ini configuration file, which
influences the global names available to a pshell session. See Extending the Shell.

• The pyramid.config.Configurator.scan() method has grown a **kw argument. kw


argument represents a set of keyword arguments to pass to the Venusian Scanner object created
by Pyramid. (See the Venusian documentation for more information about Scanner).

• New request property: json_body. This property will return the JSON-decoded variant of the
request body. If the request body is not well-formed JSON, this property will raise an exception.

• A JSONP renderer. See JSONP Renderer for more details.

• New authentication policy: pyramid.authentication.


SessionAuthenticationPolicy, which uses a session to store credentials.

• A function named pyramid.httpexceptions.exception_response() is a shortcut


that can be used to create HTTP exception response objects using an HTTP integer status code.

• Integers and longs passed as elements to pyramid.url.resource_url() or pyramid.


request.Request.resource_url() e.g. resource_url(context, request,
1, 2) (1 and 2 are the elements) will now be converted implicitly to strings in the result. Pre-
viously passing integers or longs as elements would cause a TypeError.

• pyramid_alchemy scaffold now uses query.get rather than query.filter_by to take


better advantage of identity map caching.

• pyramid_alchemy scaffold now has unit tests.

• Added a pyramid.i18n.make_localizer() API.

0.6. Change History 967


The Pyramid Web Framework, Version 1.9.4

• An exception raised by a pyramid.events.NewRequest event subscriber can now be caught


by an exception view.

• It is now possible to get information about why Pyramid raised a Forbidden exception from within an
exception view. The ACLDenied object returned by the permits method of each stock autho-
rization policy (pyramid.interfaces.IAuthorizationPolicy.permits()) is now
attached to the Forbidden exception as its result attribute. Therefore, if you’ve created a Forbid-
den exception view, you can see the ACE, ACL, permission, and principals involved in the request
as eg. context.result.permission, context.result.acl, etc within the logic of the
Forbidden exception view.

• Don’t explicitly prevent the timeout from being lower than the reissue_time when setting
up an pyramid.authentication.AuthTktAuthenticationPolicy (previously such
a configuration would raise a ValueError, now it’s allowed, although typically nonsensical).
Allowing the nonsensical configuration made the code more understandable and required fewer tests.

• The pyramid.request.Request class now has a ResponseClass attribute which points


at pyramid.response.Response.

• The pyramid.response.Response class now has a RequestClass interface which points


at pyramid.request.Request.

• It is now possible to return an arbitrary object from a Pyramid view callable even if a renderer
is not used, as long as a suitable adapter to pyramid.interfaces.IResponse is regis-
tered for the type of the returned object by using the new pyramid.config.Configurator.
add_response_adapter() API. See the section in the Hooks chapter of the documentation
entitled Changing How Pyramid Treats View Responses.

• The Pyramid router will now, by default, call the __call__ method of response objects when
returning a WSGI response. This means that, among other things, the conditional_response
feature response objects inherited from WebOb will now behave properly.

• New method named pyramid.request.Request.is_response(). This method should


be used instead of the pyramid.view.is_response() function, which has been deprecated.

• pyramid.exceptions.NotFound is now just an alias for pyramid.httpexceptions.


HTTPNotFound.

• pyramid.exceptions.Forbidden is now just an alias for pyramid.


httpexceptions.HTTPForbidden.

• Added mako.preprocessor config file parameter; allows for a Mako preprocessor to be spec-
ified as a Python callable or Python dotted name. See https://github.com/Pylons/pyramid/pull/183
for rationale.

968 Contents
The Pyramid Web Framework, Version 1.9.4

• New API class: pyramid.static.static_view. This supersedes the (now deprecated)


pyramid.view.static class. pyramid.static.static_view, by default, serves up
documents as the result of the request’s path_info, attribute rather than it’s subpath at-
tribute (the inverse was true of pyramid.view.static, and still is). pyramid.static.
static_view exposes a use_subpath flag for use when you want the static view to behave
like the older deprecated version.

• A new api function pyramid.scripting.prepare() has been added. It is a lower-level


analogue of pyramid.paster.bootstrap() that accepts a request and a registry instead of
a config file argument, and is used for the same purpose:

from pyramid.scripting import prepare


info = prepare(registry=myregistry)
request = info['request']
print request.route_url('myroute')

• A new API function pyramid.scripting.make_request() has been added. The resulting


request will have a registry attribute. It is meant to be used in conjunction with pyramid.
scripting.prepare() and/or pyramid.paster.bootstrap() (both of which accept a
request as an argument):

from pyramid.scripting import make_request


request = make_request('/')

• New API attribute pyramid.config.global_registries is an iterable object that con-


tains references to every Pyramid registry loaded into the current process via pyramid.config.
Configurator.make_wsgi_app(). It also has a last attribute containing the last registry
loaded. This is used by the scripting machinery, and is available for introspection.

• Added the pyramid.renderers.null_renderer object as an API. The null renderer is an


object that can be used in advanced integration cases as input to the view configuration renderer=
argument. When the null renderer is used as a view renderer argument, Pyramid avoids converting
the view callable result into a Response object. This is useful if you want to reuse the view configu-
ration and lookup machinery outside the context of its use by the Pyramid router. (This feature was
added for consumption by the pyramid_rpc package, which uses view configuration and lookup
outside the context of a router in exactly this way.)

Backwards Incompatibilities

• Pyramid no longer supports Python 2.4. Python 2.5 or better is required to run Pyramid 1.1+. Pyra-
mid, however, does not work under any version of Python 3 yet.

0.6. Change History 969


The Pyramid Web Framework, Version 1.9.4

• The Pyramid router now, by default, expects response objects returned from view callables to im-
plement the pyramid.interfaces.IResponse interface. Unlike the Pyramid 1.0 version of
this interface, objects which implement IResponse now must define a __call__ method that ac-
cepts environ and start_response, and which returns an app_iter iterable, among other
things. Previously, it was possible to return any object which had the three WebOb app_iter,
headerlist, and status attributes as a response, so this is a backwards incompatibility. It is
possible to get backwards compatibility back by registering an adapter to IResponse from the type
of object you’re now returning from view callables. See the section in the Hooks chapter of the
documentation entitled Changing How Pyramid Treats View Responses.

• The pyramid.interfaces.IResponse interface is now much more extensive. Previously


it defined only app_iter, status and headerlist; now it is basically intended to directly
mirror the webob.Response API, which has many methods and attributes.

• The pyramid.httpexceptions classes named HTTPFound, HTTPMultipleChoices,


HTTPMovedPermanently, HTTPSeeOther, HTTPUseProxy, and
HTTPTemporaryRedirect now accept location as their first positional argument rather
than detail. This means that you can do, e.g. return pyramid.httpexceptions.
HTTPFound('http://foo') rather than return pyramid.httpexceptions.
HTTPFound(location='http//foo') (the latter will of course continue to work).

• The pyramid Router attempted to set a value into the key environ['repoze.bfg.message']
when it caught a view-related exception for backwards compatibility with applications written for
repoze.bfg during error handling. It did this by using code that looked like so:

# "why" is an exception object


try:
msg = why[0]
except:
msg = ''

environ['repoze.bfg.message'] = msg

Use of the value environ['repoze.bfg.message'] was docs-deprecated in Pyramid 1.0.


Our standing policy is to not remove features after a deprecation for two full major releases, so this
code was originally slated to be removed in Pyramid 1.2. However, computing the repoze.bfg.
message value was the source of at least one bug found in the wild (https://github.com/Pylons/
pyramid/issues/199), and there isn’t a foolproof way to both preserve backwards compatibility and
to fix the bug. Therefore, the code which sets the value has been removed in this release. Code
in exception views which relies on this value’s presence in the environment should now use the
exception attribute of the request (e.g. request.exception[0]) to retrieve the message
instead of relying on request.environ['repoze.bfg.message'].

970 Contents
The Pyramid Web Framework, Version 1.9.4

Deprecations and Behavior Differences

Under Python 2.7+, it’s necessary to pass the Python interpreter the correct warning flags to see
deprecation warnings emitted by Pyramid when porting your application from an older version of Pyra-
mid. Use the PYTHONWARNINGS environment variable with the value all in the shell you use to in-
voke paster serve to see these warnings, e.g. on UNIX, PYTHONWARNINGS=all $VENV/bin/
paster serve development.ini. Python 2.5 and 2.6 show deprecation warnings by default, so
this is unnecessary there. All deprecation warnings are emitted to the console.

• The pyramid.view.static class has been deprecated in favor of the newer pyramid.
static.static_view class. A deprecation warning is raised when it is used. You should re-
place it with a reference to pyramid.static.static_view with the use_subpath=True
argument.

• The paster pshell, paster proutes, and paster pviews commands now take a sin-
gle argument in the form /path/to/config.ini#sectionname rather than the previous 2-
argument spelling /path/to/config.ini sectionname. #sectionname may be omit-
ted, in which case #main is assumed.

• The default Mako renderer is now configured to escape all HTML in expression tags. This is intended
to help prevent XSS attacks caused by rendering unsanitized input from users. To revert this behavior
in user’s templates, they need to filter the expression through the ’n’ filter:

${ myhtml | n }.

See https://github.com/Pylons/pyramid/issues/193.

• Deprecated all assignments to request.response_* attributes (for example request.


response_content_type = 'foo' is now deprecated). Assignments and mutations of
assignable request attributes that were considered by the framework for response influence are now
deprecated: response_content_type, response_headerlist, response_status,
response_charset, and response_cache_for. Instead of assigning these to the re-
quest object for later detection by the rendering machinery, users should use the appropri-
ate API of the Response object created by accessing request.response (e.g. code which
does request.response_content_type = 'abc' should be changed to request.
response.content_type = 'abc').

• Passing view-related parameters to pyramid.config.Configurator.add_route() is


now deprecated. Previously, a view was permitted to be connected to a route using a set of view*
parameters passed to the add_route method of the Configurator. This was a shorthand which
replaced the need to perform a subsequent call to add_view. For example, it was valid (and often
recommended) to do:

0.6. Change History 971


The Pyramid Web Framework, Version 1.9.4

config.add_route('home', '/', view='mypackage.views.myview',


view_renderer='some/renderer.pt')

Passing view* arguments to add_route is now deprecated in favor of connecting a view to


a predefined route via pyramid.config.Configurator.add_view() using the route’s
route_name parameter. As a result, the above example should now be spelled:

config.add_route('home', '/')
config.add_view('mypackage.views.myview', route_name='home',
renderer='some/renderer.pt')

This deprecation was done to reduce confusion observed in IRC, as well as to (eventually) reduce
documentation burden. A deprecation warning is now issued when any view-related parameter is
passed to add_route.

See also:

See also issue #164 on GitHub.

• Passing an environ dictionary to the __call__ method of a ”traverser” (e.g. an object


that implements pyramid.interfaces.ITraverser such as an instance of pyramid.
traversal.ResourceTreeTraverser) as its request argument now causes a depreca-
tion warning to be emitted. Consumer code should pass a request object instead. The fact that
passing an environ dict is permitted has been documentation-deprecated since repoze.bfg 1.1,
and this capability will be removed entirely in a future version.

• The following (undocumented, dictionary-like) methods of the pyramid.request.Request


object have been deprecated: __contains__, __delitem__, __getitem__, __iter__,
__setitem__, get, has_key, items, iteritems, itervalues, keys, pop, popitem,
setdefault, update, and values. Usage of any of these methods will cause a deprecation
warning to be emitted. These methods were added for internal compatibility in repoze.bfg 1.1
(code that currently expects a request object expected an environ object in BFG 1.0 and before). In
a future version, these methods will be removed entirely.

• A custom request factory is now required to return a request object that has a response attribute
(or ”reified”/lazy property) if the request is meant to be used in a view that uses a renderer. This
response attribute should be an instance of the class pyramid.response.Response.

• The JSON and string renderer factories now assign to request.response.content_type


rather than request.response_content_type.

972 Contents
The Pyramid Web Framework, Version 1.9.4

• Each built-in renderer factory now determines whether it should change the content type of the
response by comparing the response’s content type against the response’s default content type; if
the content type is the default content type (usually text/html), the renderer changes the content
type (to application/json or text/plain for JSON and string renderers respectively).

• The pyramid.wsgi.wsgiapp2() now uses a slightly different method of figuring out how to
”fix” SCRIPT_NAME and PATH_INFO for the downstream application. As a result, those values
may differ slightly from the perspective of the downstream application (for example, SCRIPT_NAME
will now never possess a trailing slash).

• Previously, pyramid.request.Request inherited from webob.request.Request and


implemented __getattr__, __setattr__ and __delattr__ itself in order to override ”ad-
hoc attr” WebOb behavior where attributes of the request are stored in the environ. Now, pyramid.
request.Request inherits from (the more recent) webob.request.BaseRequest instead
of webob.request.Request, which provides the same behavior. pyramid.request.
Request no longer implements its own __getattr__, __setattr__ or __delattr__ as
a result.

• Deprecated pyramid.view.is_response() function in favor of (newly-added) pyramid.


request.Request.is_response() method. Determining if an object is truly a valid re-
sponse object now requires access to the registry, which is only easily available as a request attribute.
The pyramid.view.is_response() function will still work until it is removed, but now may
return an incorrect answer under some (very uncommon) circumstances.

• pyramid.response.Response is now a subclass of webob.response.Response (in


order to directly implement the pyramid.interfaces.IResponse interface, to speed up re-
sponse generation).

• The ”exception response” objects importable from pyramid.httpexceptions (e.g.


HTTPNotFound) are no longer just import aliases for classes that actually live in webob.exc.
Instead, we’ve defined our own exception classes within the module that mirror and emulate the
webob.exc exception response objects almost entirely. See Pyramid uses its own HTTP excep-
tion class hierarchy rather than webob.exc in the Design Defense chapter for more information.

• When visiting a URL that represented a static view which resolved to a subdirectory, the index.
html of that subdirectory would not be served properly. Instead, a redirect to /subdir would be
issued. This has been fixed, and now visiting a subdirectory that contains an index.html within
a static view returns the index.html properly.

See also:

See also issue #67 on GitHub.

0.6. Change History 973


The Pyramid Web Framework, Version 1.9.4

• Deprecated the pyramid.config.Configurator.set_renderer_globals_factory


method and the renderer_globals Configurator constructor parameter. Users should convert
code using this feature to use a BeforeRender event. See the section Using the Before Render Event
in the Hooks chapter.

• In Pyramid 1.0, the pyramid.events.subscriber directive behaved contrary to the docu-


mentation when passed more than one interface object to its constructor. For example, when the
following listener was registered:

@subscriber(IFoo, IBar)
def expects_ifoo_events_and_ibar_events(event):
print event

The Events chapter docs claimed that the listener would be registered and listening for both IFoo
and IBar events. Instead, it registered an ”object event” subscriber which would only be called if an
IObjectEvent was emitted where the object interface was IFoo and the event interface was IBar.

The behavior now matches the documentation. If you were relying on the buggy behavior of the
1.0 subscriber directive in order to register an object event subscriber, you must now pass a
sequence to indicate you’d like to register a subscriber for an object event. e.g.:

@subscriber([IFoo, IBar])
def expects_object_event(object, event):
print object, event

• In 1.0, if a pyramid.events.BeforeRender event subscriber added a value via the


__setitem__ or update methods of the event object with a key that already existed
in the renderer globals dictionary, a KeyError was raised. With the deprecation of the
”add_renderer_globals” feature of the configurator, there was no way to override an existing value
in the renderer globals dictionary that already existed. Now, the event object will overwrite an older
value that is already in the globals dictionary when its __setitem__ or update is called (as well
as the new setdefault method), just like a plain old dictionary. As a result, for maximum inter-
operability with other third-party subscribers, if you write an event subscriber meant to be used as a
BeforeRender subscriber, your subscriber code will now need to (using .get or __contains__
of the event object) ensure no value already exists in the renderer globals dictionary before setting
an overriding value.

• The pyramid.config.Configurator.add_route() method allowed two routes with the


same route to be added without an intermediate call to pyramid.config.Configurator.
commit(). If you now receive a ConfigurationError at startup time that appears to be
add_route related, you’ll need to either a) ensure that all of your route names are unique or b)
call config.commit() before adding a second route with the name of a previously added name
or c) use a Configurator that works in autocommit mode.

974 Contents
The Pyramid Web Framework, Version 1.9.4

Dependency Changes

• Pyramid now depends on WebOb >= 1.0.2 as tests depend on the bugfix in that release: ”Fix handling
of WSGI environs with missing SCRIPT_NAME”. (Note that in reality, everyone should probably
be using 1.0.4 or better though, as WebOb 1.0.2 and 1.0.3 were effectively brownbag releases.)

Documentation Enhancements

• Added a section entitled Writing a Script to the ”Command-Line Pyramid” chapter.

• The ZODB + Traversal Wiki Tutorial was updated slightly.

• The SQLAlchemy + URL dispatch wiki tutorial was updated slightly.

• Made pyramid.interfaces.IAuthenticationPolicy and pyramid.


interfaces.IAuthorizationPolicy public interfaces, and they are now referred to
within the pyramid.authentication and pyramid.authorization API docs.

• Render the function definitions for each exposed interface in pyramid.interfaces.

• Add missing docs reference to pyramid.config.Configurator.set_view_mapper()


and refer to it within the documentation section entitled Using a View Mapper.

• Added section to the ”Environment Variables and .ini File Settings” chapter in the narrative doc-
umentation section entitled Adding a Custom Setting.

• Added documentation for a multidict as pyramid.interfaces.IMultiDict.

• Added a section to the ”URL Dispatch” narrative chapter regarding the new ”static” route feature
entitled Static Routes.

• Added API docs for pyramid.httpexceptions.exception_response().

• Added HTTP Exceptions section to Views narrative chapter including a description of pyramid.
httpexceptions.exception_response().

• Added API docs for pyramid.authentication.SessionAuthenticationPolicy.

0.6. Change History 975


The Pyramid Web Framework, Version 1.9.4

0.6.8 What’s New in Pyramid 1.0

This article explains the new features in Pyramid version 1.0 as compared to its predecessor, repoze.
bfg 1.3. It also documents backwards incompatibilities between the two versions and deprecations added
to Pyramid 1.0, as well as software dependency changes and notable documentation additions.

Major Feature Additions

The major feature additions in Pyramid 1.0 are:

• New name and branding association with the Pylons Project.

• BFG conversion script

• Scaffold improvements

• Terminology changes

• Better platform compatibility and support

• Direct built-in support for the Mako templating language.

• Built-in support for sessions.

• Updated URL dispatch features

• Better imperative extensibility

• ZCML externalized

• Better support for global template variables during rendering

• View mappers

• Testing system improvements

• Authentication support improvements

• Documentation improvements

976 Contents
The Pyramid Web Framework, Version 1.9.4

New Name and Branding

The name of repoze.bfg has been changed to Pyramid. The project is also now a subproject of a new
entity, ”The Pylons Project”. The Pylons Project is the project name for a collection of web-framework-
related technologies. Pyramid was the first package in the Pylons Project. Other packages to the collection
have been added over time, such as support packages useful for Pylons 1 users as well as ex-Zope users.
Pyramid is the successor to both repoze.bfg and Pylons version 1.

The Pyramid codebase is derived almost entirely from repoze.bfg with some changes made for the
sake of Pylons 1 compatibility.

Pyramid is technically backwards incompatible with repoze.bfg, as it has a new package name, so
older imports from the repoze.bfg module will fail if you do nothing to your existing repoze.bfg
application. However, you won’t have to do much to use your existing BFG applications on Pyramid.
There’s automation which will change most of your import statements and ZCML declarations. See http:
//docs.pylonsproject.org/projects/pyramid/current/tutorials/bfg/index.html for upgrade instructions.

Pylons 1 users will need to do more work to use Pyramid, as Pyramid shares no ”DNA” with Pylons. It is
hoped that over time documentation and upgrade code will be developed to help Pylons 1 users transition
to Pyramid more easily.

repoze.bfg version 1.3 will be its last major release. Minor updates will be made for critical bug fixes.
Pylons version 1 will continue to see maintenance releases, as well.

The Repoze project will continue to exist. Repoze will be able to regain its original focus: bringing Zope
technologies to WSGI. The popularity of repoze.bfg as its own web framework hindered this goal.

We hope that people are attracted at first by the spirit of cooperation demonstrated by the Pylons Project
and the merging of development communities. It takes humility to sacrifice a little sovereignty and work
together. The opposite, forking or splintering of projects, is much more common in the open source world.
We feel there is a limited amount of oxygen in the space of ”top-tier” Python web frameworks and we
don’t do the Python community a service by over-crowding. By merging the repoze.bfg and the
philosophically-similar Pylons communities, both gain an expanded audience and a stronger chance of
future success.

BFG Conversion Script

The bfg2pyramid conversion script performs a mostly automated conversion of an existing repoze.
bfg application to Pyramid. The process is described in ”Converting a BFG Application to Pyramid”.

0.6. Change History 977


The Pyramid Web Framework, Version 1.9.4

Scaffold Improvements

• The scaffolds now have much nicer CSS and graphics.

• The development.ini, generated by all scaffolds, is now configured to use the WebError inter-
active exception debugger by default.

• All scaffolds have been normalized: each now uses the name main to represent the function that
returns a WSGI application, and each now has roughly the same shape of development.ini style.

• All preexisting scaffolds now use ”imperative” configuration (starter, routesalchemy,


alchemy, zodb) instead of ZCML configuration.

• The pyramid_zodb, routesalchemy and pyramid_alchemy scaffolds now use a default


”commit veto” hook when configuring the repoze.tm2 transaction manager in development.
ini. This prevents a transaction from being committed when the response status code is within the
400 or 500 ranges.

See also:

See also http://docs.repoze.org/tm2/#using-a-commit-veto.

Terminology Changes

• The Pyramid concept previously known as ”model” is now known as ”resource”. As a result, the
following API renames have been made. Backwards compatibility shims for the old names have
been left in place in all cases:

pyramid.url.model_url ->
pyramid.url.resource_url

pyramid.traversal.find_model ->
pyramid.url.find_resource

pyramid.traversal.model_path ->
pyramid.traversal.resource_path

pyramid.traversal.model_path_tuple ->
pyramid.traversal.resource_path_tuple
(continues on next page)

978 Contents
The Pyramid Web Framework, Version 1.9.4

(continued from previous page)

pyramid.traversal.ModelGraphTraverser ->
pyramid.traversal.ResourceTreeTraverser

pyramid.config.Configurator.testing_models ->
pyramid.config.Configurator.testing_resources

pyramid.testing.registerModels ->
pyramid.testing.registerResources

pyramid.testing.DummyModel ->
pyramid.testing.DummyResource

• All documentation which previously referred to ”model” now refers to ”resource”.

• The starter scaffold now has a resources.py module instead of a models.py module.

• Positional argument names of various APIs have been changed from model to resource.

• The Pyramid concept previously known as ”resource” is now known as ”asset”. As a result, the
following API changes were made. Backwards compatibility shims have been left in place as nec-
essary:

pyramid.config.Configurator.absolute_resource_spec ->
pyramid.config.Configurator.absolute_asset_
,→spec

pyramid.config.Configurator.override_resource ->
pyramid.config.Configurator.override_asset

• The (non-API) module previously known as pyramid.resource is now known as pyramid.


asset.

• All docs that previously referred to ”resource specification” now refer to ”asset specification”.

• The setting previously known as BFG_RELOAD_RESOURCES (envvar) or reload_resources


(config file) is now known, respectively, as PYRAMID_RELOAD_ASSETS and reload_assets.

0.6. Change History 979


The Pyramid Web Framework, Version 1.9.4

Better Platform Compatibility and Support

We’ve made Pyramid’s test suite pass on both Jython and PyPy. However, Chameleon doesn’t work on
either, so you’ll need to use Mako or Jinja2 templates on these platforms.

Sessions

Pyramid now has built-in sessioning support, documented in Sessions. The sessioning implementation is
pluggable. It also provides flash messaging and cross-site-scripting prevention features.

Using request.session now returns a (dictionary-like) session object if a session factory has been
configured.

A new argument to the Configurator constructor exists: session_factory and a new method on the
configurator exists: pyramid.config.Configurator.set_session_factory().

Mako

In addition to Chameleon templating, Pyramid now also provides built-in support for Mako templating.
See Available Add-On Template System Bindings for more information.

URL Dispatch

• URL Dispatch now allows for replacement markers to be located anywhere in the pattern, instead of
immediately following a /.

• URL Dispatch now uses the form {marker} to denote a replace marker in the route pattern instead
of :marker. The old colon-style marker syntax is still accepted for backwards compatibility. The
new format allows a regular expression for that marker location to be used instead of the default
[^/]+, for example {marker:\d+} is now valid to require the marker to be digits.

• Addded a new API pyramid.url.current_route_url(), which computes a URL based


on the ”current” route (if any) and its matchdict values.

• Added a paster proute command which displays a summary of the routing table. See the
narrative documentation section entitled Displaying All Application Routes.

980 Contents
The Pyramid Web Framework, Version 1.9.4

• Added debug_routematch configuration setting (settable in your .ini file) that logs matched
routes including the matchdict and predicates.

• Add a pyramid.url.route_path() API, allowing folks to generate relative URLs. Call-


ing route_path is the same as calling pyramid.url.route_url() with the argument
_app_url equal to the empty string.

• Add a pyramid.request.Request.route_path() API. This is a convenience method of


the request which calls pyramid.url.route_url().

• Added class vars matchdict and matched_route to pyramid.request.Request. Each


is set to None when a route isn’t matched during a request.

ZCML Externalized

• The load_zcml method of a Configurator has been removed from the Pyramid core. Loading
ZCML is now a feature of the pyramid_zcml package, which can be downloaded from PyPI. Doc-
umentation for the package should be available via http://docs.pylonsproject.org/projects/pyramid_
zcml/en/latest/, which describes how to add a configuration statement to your main block to re-
obtain this method. You will also need to add an install_requires dependency upon the
pyramid_zcml distribution to your setup.py file.

• The ”Declarative Configuration” narrative chapter has been removed (it was moved to the
pyramid_zcml package).

• Most references to ZCML in narrative chapters have been removed or redirected to pyramid_zcml
locations.

• The starter_zcml paster scaffold has been moved to the pyramid_zcml package.

Imperative Two-Phase Configuration

To support application extensibility, the Pyramid Configurator, by default, now detects configuration con-
flicts and allows you to include configuration imperatively from other packages or modules. It also, by
default, performs configuration in two separate phases. This allows you to ignore relative configuration
statement ordering in some circumstances. See Advanced Configuration for more information.

The pyramid.config.Configurator.add_directive() allows framework extenders to add


methods to the configurator, which allows extenders to avoid subclassing a Configurator just to add meth-
ods. See Adding Methods to the Configurator via add_directive for more info.

Surrounding application configuration with config.begin() and config.end() is no longer nec-


essary. All scaffolds have been changed to no longer call these functions.

0.6. Change History 981


The Pyramid Web Framework, Version 1.9.4

Better Support for Global Template Variables During Rendering

A new event type named pyramid.interfaces.IBeforeRender is now sent as an event before


a renderer is invoked. Applications may now subscribe to the IBeforeRender event type in order to
introspect the and modify the set of renderer globals before they are passed to a renderer. The event object
iself has a dictionary-like interface that can be used for this purpose. For example:

from repoze.events import subscriber


from pyramid.interfaces import IRendererGlobalsEvent

@subscriber(IRendererGlobalsEvent)
def add_global(event):
event['mykey'] = 'foo'

View Mappers

A ”view mapper” subsystem has been extracted, which allows framework extenders to control how view
callables are constructed and called. This feature is not useful for ”civilians”, only for extension writers.
See Using a View Mapper for more information.

Testing Support Improvements

The pyramid.testing.setUp() and pyramid.testing.tearDown() APIs have been un-


deprecated. They are now the canonical setup and teardown APIs for test configuration, replacing ”direct”
creation of a Configurator. This is a change designed to provide a facade that will protect against any future
Configurator deprecations.

Authentication Support Improvements

• The pyramid.interfaces.IAuthenticationPolicy interface now specifies an


unauthenticated_userid method. This method supports an important optimization
required by people who are using persistent storages which do not support object caching and whom
want to create a ”user object” as a request attribute.

• A new API has been added to the pyramid.security module named


unauthenticated_userid. This API function calls the unauthenticated_userid
method of the effective security policy.

982 Contents
The Pyramid Web Framework, Version 1.9.4

• The class pyramid.authentication.AuthTktCookieHelper is now an API. This class


can be used by third-party authentication policy developers to help in the mechanics of authentication
cookie-setting.

• The pyramid.authentication.AuthTktAuthenticationPolicy now accepts a


tokens parameter via pyramid.security.remember(). The value must be a sequence
of strings. Tokens are placed into the auth_tkt ”tokens” field and returned in the auth_tkt cookie.

• Added a wild_domain argument to pyramid.authentication.


AuthTktAuthenticationPolicy, which defaults to True. If it is set to False, the
feature of the policy which sets a cookie with a wilcard domain will be turned off.

Documentation Improvements

• Casey Duncan, a good friend, and an excellent technical writer has given us the gift of professionally
editing the entire Pyramid documentation set. Any faults in the documentation are the development
team’s, and all improvements are his.

• The ”Resource Location and View Lookup” chapter has been replaced with a variant of Rob
Miller’s ”Much Ado About Traversal” (originally published at http://blog.nonsequitarian.org/2010/
much-ado-about-traversal/).

• Many users have contributed documentation fixes and improvements including Ben Bangert, Blaise
Laflamme, Rob Miller, Mike Orr, Carlos de la Guardia, Paul Everitt, Tres Seaver, John Shipman,
Marius Gedminas, Chris Rossi, Joachim Krebs, Xavier Spriet, Reed O’Brien, William Chambers,
Charlie Choiniere, and Jamaludin Ahmad.

Minor Feature Additions

• The settings dictionary passed to the Configurator is now available as config.registry.


settings in configuration code and request.registry.settings in view code).

• pyramid.config.Configurator.add_view() now accepts a decorator keyword ar-


gument, a callable which will decorate the view callable before it is added to the registry.

• Allow static renderer provided during view registration to be overridden at request time via a request
attribute named override_renderer, which should be the name of a previously registered ren-
derer. Useful to provide ”omnipresent” RPC using existing rendered views.

0.6. Change History 983


The Pyramid Web Framework, Version 1.9.4

• If a resource implements a __resource_url__ method, it will be called as the result of invoking


the pyramid.url.resource_url() function to generate a URL, overriding the default logic.
See Generating the URL of a Resource for more information.

• The name registry is now available in a pshell environment by default. It is the application
registry object.

• Added support for json on Google App Engine by catching NotImplementedError and im-
porting simplejson from django.utils.

• Added the pyramid.httpexceptions module, which is a facade for the webob.exc module.

• New class: pyramid.response.Response. This is a pure facade for webob.Response


(old code need not change to use this facade, it’s existence is mostly for vanity and documentation-
generation purposes).

• The request now has a new attribute: tmpl_context for benefit of Pylons users.

• New API methods for pyramid.request.Request: model_url, route_url, and


static_url. These are simple passthroughs for their respective functions in pyramid.url.

Backwards Incompatibilities

• When a pyramid.exceptions.Forbidden error is raised, its status code now 403


Forbidden. It was previously 401 Unauthorized, for backwards compatibility purposes
with repoze.bfg. This change will cause problems for users of Pyramid with repoze.who,
which intercepts 401 Unauthorized by default, but allows 403 Forbidden to pass through.
Those deployments will need to configure repoze.who to also react to 403 Forbidden. To
do so, use a repoze.who challenge_decider that looks like this:

import zope.interface
from repoze.who.interfaces import IChallengeDecider

def challenge_decider(environ, status, headers):


return status.startswith('403') or status.startswith('401')
zope.interface.directlyProvides(challenge_decider,␣
,→IChallengeDecider)

• The paster bfgshell command is now known as paster pshell.

984 Contents
The Pyramid Web Framework, Version 1.9.4

• There is no longer an IDebugLogger object registered as a named utility with the name repoze.
bfg.debug.
• These deprecated APIs have been removed: pyramid.testing.
registerViewPermission, pyramid.testing.registerRoutesMapper,
pyramid.request.get_request, pyramid.security.Unauthorized, pyramid.
view.view_execution_permitted, pyramid.view.NotFound
• The Venusian ”category” for all built-in Venusian decorators (e.g. subscriber and
view_config/bfg_view) is now pyramid instead of bfg.
• The pyramid.renderers.rendered_response function removed; use pyramid.
renderers.render_to_response() instead.
• Renderer factories now accept a renderer info object rather than an absolute resource specification or
an absolute path. The object has the following attributes: name (the renderer= value), package
(the ’current package’ when the renderer configuration statement was found), type: the renderer
type, registry: the current registry, and settings: the deployment settings dictionary. Third-
party repoze.bfg renderer implementations that must be ported to Pyramid will need to account
for this. This change was made primarily to support more flexible Mako template rendering.
• The presence of the key repoze.bfg.message in the WSGI environment when an exception oc-
curs is now deprecated. Instead, code which relies on this environ value should use the exception
attribute of the request (e.g. request.exception[0]) to retrieve the message.
• The values bfg_localizer and bfg_locale_name kept on the request during internation-
alization for caching purposes were never APIs. These however have changed to localizer and
locale_name, respectively.
• The default cookie_name value of the pyramid.authentication.
AuthTktAuthenticationPolicy now defaults to auth_tkt (it used to default to
repoze.bfg.auth_tkt).
• The pyramid.testing.zcml_configure() API has been removed. It had been advertised
as removed since repoze.bfg 1.2a1, but hadn’t actually been.
• All environment variables which used to be prefixed with BFG_ are now prefixed with PYRAMID_
(e.g. BFG_DEBUG_NOTFOUND is now PYRAMID_DEBUG_NOTFOUND)
• Since the pyramid.interfaces.IAuthenticationPolicy interface now specifies that a
policy implementation must implement an unauthenticated_userid method, all third-party
custom authentication policies now must implement this method. It, however, will only be called
when the global function named pyramid.security.unauthenticated_userid() is
invoked, so if you’re not invoking that, you will not notice any issues.
• The configure_zcml setting within the deployment settings (within **settings passed to a
Pyramid main function) has ceased to have any meaning.
• The make_app function has been removed from the pyramid.router module. It continues
life within the pyramid_zcml package. This leaves the pyramid.router module without
any API functions.

0.6. Change History 985


The Pyramid Web Framework, Version 1.9.4

Deprecations and Behavior Differences

• pyramid.configuration.Configurator is now deprecated. Use pyramid.config.


Configurator, passing its constructor autocommit=True instead. The pyramid.
configuration.Configurator alias will live for a long time, as every application uses
it, but its import now issues a deprecation warning. The pyramid.config.Configurator
class has the same API as the pyramid.configuration.Configurator class, which it
means to replace, except by default it is a non-autocommitting configurator. The now-deprecated
pyramid.configuration.Configurator will autocommit every time a configuration
method is called. The pyramid.configuration module remains, but it is deprecated. Use
pyramid.config instead.

• The pyramid.settings.get_settings() API is now deprecated. Use pyramid.


threadlocals.get_current_registry().settings instead or use the settings
attribute of the registry available from the request (request.registry.settings).

• The decorator previously known as pyramid.view.bfg_view is now known most formally as


pyramid.view.view_config in docs and scaffolds.

• Obtaining the settings object via registry.{get|query}Utility(ISettings) is


now deprecated. Instead, obtain the settings object via the registry.settings attribute.
A backwards compatibility shim was added to the registry object to register the settings object as
an ISettings utility when setattr(registry, 'settings', foo) is called, but it will be
removed in a later release.

• Obtaining the settings object via pyramid.settings.get_settings() is now depre-


cated. Obtain it instead as the settings attribute of the registry now (obtain the registry via
pyramid.threadlocal.get_registry() or as request.registry).

Dependency Changes

• Depend on Venusian >= 0.5 (for scanning conflict exception decoration).

Documentation Enhancements

• Added a pyramid.httpexceptions API documentation chapter.

• Added a pyramid.session API documentation chapter.

986 Contents
The Pyramid Web Framework, Version 1.9.4

• Added an API chapter for the pyramid.response module.

• Added a Sessions narrative documentation chapter.

• All documentation which previously referred to webob.Response now uses pyramid.


response.Response instead.

• The documentation has been overhauled to use imperative configuration, moving declarative con-
figuration (ZCML) explanations to an external package, pyramid_zcml.

• Removed zodbsessions tutorial chapter. It’s still useful, but we now have a SessionFactory
abstraction which competes with it, and maintaining documentation on both ways to do it is a dis-
traction.

• Added an example of WebTest functional testing to the testing narrative chapter at Creating Func-
tional Tests.

• Extended the Resources chapter with examples of calls to resource-related APIs.

• Add ”Pyramid Provides More Than One Way to Do It” to Design Defense documentation.

• The (weak) ”Converting a CMF Application to Pyramid” tutorial has been removed from the tu-
torials section. It was moved to the pyramid_tutorials Github repository at http://docs.
pylonsproject.org/projects/pyramid_tutorials/dev/.

• Moved ”Using ZODB With ZEO” and ”Using repoze.catalog Within Pyramid” tutorials out of core
documentation and into the Pyramid Tutorials site (http://docs.pylonsproject.org/projects/pyramid_
tutorials/dev/).

• Removed API documentation for deprecated pyramid.testing APIs


named registerDummySecurityPolicy, registerResources,
registerModels, registerEventListener, registerTemplateRenderer,
registerDummyRenderer, registerView, registerUtility, registerAdapter,
registerSubscriber, registerRoute, and registerSettings.

0.6.9 Pyramid Change History

1.9.5 (unreleased)

• Fix docs build for Sphinx 2.0. See https://github.com/Pylons/pyramid/pull/3482

0.6. Change History 987


The Pyramid Web Framework, Version 1.9.4

1.9.4 (2019-01-30)

• Fix a bug in pyramid.testing.DummySecurityPolicy in which


principals_allows_by_permission would return all principals instead of an empty list
if permissive is False. See https://github.com/Pylons/pyramid/pull/3451
• Fix a bug in which pyramid.exceptions.ConfigurationConflictError may not ren-
der the appropriate error message on certain conflicts that were not sortable on Python 3 due to
differing types. See https://github.com/Pylons/pyramid/pull/3458
• Avoid configuring logging in the monitor process using the logging config intended for the applica-
tion. This avoids opening files for writing in both processes which can cause issues on some systems.
See https://github.com/Pylons/pyramid/pull/3461

1.9.3 (2018-10-31)

• Set appropriate code and title attributes on the HTTPClientError and


HTTPServerError exception classes. This prevents inadvertently returning a 520 error
code. See https://github.com/Pylons/pyramid/pull/3280

1.9.2 (2018-04-23)

• Pin to webob >= 1.7.0 instead of 1.7.0rc2 to avoid accidentally opting users into pre-
releases because a downstream dependency allowed it. See https://github.com/Pylons/pyramid/
issues/3220
• Fix pyramid.scripting.get_root which was broken by the execution policy feature added
in the 1.9 release. See https://github.com/Pylons/pyramid/pull/3265

1.9.1 (2017-07-13)

• Add a _depth and _category arguments to all of the venusian decorators. The
_category argument can be used to affect which actions are registered when performing a
config.scan(..., category=...) with a specific category. The _depth argument
should be used when wrapping the decorator in your own. This change affects pyramid.
view.view_config, pyramid.view.exception_view_config, pyramid.view.
forbidden_view_config, pyramid.view.notfound_view_config, pyramid.
events.subscriber and pyramid.response.response_adapter decorators. See
https://github.com/Pylons/pyramid/pull/3121 and https://github.com/Pylons/pyramid/pull/3123
• Fix a circular import which made it impossible to import pyramid.viewderivers before
pyramid.config. See https://github.com/Pylons/pyramid/pull/3124
• Improve documentation to show the pyramid.config.Configurator being used as a context
manager in more places. See https://github.com/Pylons/pyramid/pull/3126

988 Contents
The Pyramid Web Framework, Version 1.9.4

1.9 (2017-06-26)

• No major changes from 1.9b1.

• Updated documentation links for docs.pylonsproject.org to use HTTPS.

1.9b1 (2017-06-19)

• Add an informative error message when unknown predicates are supplied. The new message suggests
alternatives based on the list of known predicates. See https://github.com/Pylons/pyramid/pull/3054

• Added integrity attributes for JavaScripts in cookiecutters, scaffolds, and resulting source files in
tutorials. See https://github.com/Pylons/pyramid/issues/2548

• Update RELEASING.txt for updating cookiecutters. Change cookiecutter URLs to use shortcut.
See https://github.com/Pylons/pyramid/issues/3042

• Ensure the correct threadlocals are pushed during view execution when invoked from request.
invoke_exception_view. See https://github.com/Pylons/pyramid/pull/3060

• Fix a bug in which pyramid.security.ALL_PERMISSIONS failed to return a valid iterator


in its __iter__ implementation. See https://github.com/Pylons/pyramid/pull/3074

• Normalize the permission results to a proper class hierarchy. pyramid.security.


ACLAllowed is now a subclass of pyramid.security.Allowed and pyramid.
security.ACLDenied is now a subclass of pyramid.security.Denied. See https:
//github.com/Pylons/pyramid/pull/3084

• Add a quote_via argument to pyramid.encode.urlencode to follow the stdlib’s version


and enable custom quoting functions. See https://github.com/Pylons/pyramid/pull/3088

• Support _query=None and _anchor=None in request.route_url as well as query=None


and anchor=None in request.resource_url. Previously this would cause an ? and a
#, respectively, in the url with nothing after it. Now the unnecessary parts are dropped from the
generated URL. See https://github.com/Pylons/pyramid/pull/3034

• Revamp the IRouter API used by IExecutionPolicy to force pushing/popping the re-
quest threadlocals. The IRouter.make_request(environ) API has been replaced by
IRouter.request_context(environ) which should be used as a context manager. See
https://github.com/Pylons/pyramid/pull/3086

0.6. Change History 989


The Pyramid Web Framework, Version 1.9.4

1.9a2 (2017-05-09)

Backward Incompatibilities

• request.exception and request.exc_info will only be set if the response was generated
by the EXCVIEW tween. This is to avoid any confusion where a response was generated elsewhere
in the pipeline and not in direct relation to the original exception. If anyone upstream wants to
catch and render responses for exceptions they should set request.exception and request.
exc_info themselves to indicate the exception that was squashed when generating the response.

Similar behavior occurs with request.invoke_exception_view in which the exception


properties are set to reflect the exception if a response is successfully generated by the method.

This is a very minor incompatibility. Most tweens right now would give priority to the raised ex-
ception and ignore request.exception. This change just improves and clarifies that book-
keeping by trying to be more clear about the relationship between the response and its squashed ex-
ception. See https://github.com/Pylons/pyramid/pull/3029 and https://github.com/Pylons/pyramid/
pull/3031

1.9a1 (2017-05-01)

Major Features

• The file format used by all p* command line scripts such as pserve and pshell, as well as
the pyramid.paster.bootstrap function is now replaceable thanks to a new dependency on
plaster.

For now, Pyramid is still shipping with integrated support for the PasteDeploy INI format by de-
pending on the plaster_pastedeploy binding library. This may change in the future.

See https://github.com/Pylons/pyramid/pull/2985

• Added an execution policy hook to the request pipeline. An execution policy has the ability to control
creation and execution of the request objects before they enter the rest of the pipeline. This means
for a single request environ the policy may create more than one request object.

The first library to use this feature is pyramid_retry.

See https://github.com/Pylons/pyramid/pull/2964

990 Contents
The Pyramid Web Framework, Version 1.9.4

• CSRF support has been refactored out of sessions and into its own independent API
in the pyramid.csrf module. It supports a pluggable pyramid.interfaces.
ICSRFStoragePolicy which can be used to define your own mechanism for gener-
ating and validating CSRF tokens. By default, Pyramid continues to use the pyramid.
csrf.LegacySessionCSRFStoragePolicy that uses the request.session.
get_csrf_token and request.session.new_csrf_token APIs under the hood
to preserve compatibility. Two new policies are shipped as well, pyramid.csrf.
SessionCSRFStoragePolicy and pyramid.csrf.CookieCSRFStoragePolicy
which will store the CSRF tokens in the session and in a standalone cookie, respectively.
The storage policy can be changed by using the new pyramid.config.Configurator.
set_csrf_storage_policy config directive.

CSRF tokens should be used via the new pyramid.csrf.get_csrf_token, pyramid.


csrf.new_csrf_token and pyramid.csrf.check_csrf_token APIs in order to con-
tinue working if the storage policy is changed. Also, the pyramid.csrf.get_csrf_token
function is injected into templates to be used conveniently in UI code.

See https://github.com/Pylons/pyramid/pull/2854 and https://github.com/Pylons/pyramid/pull/


3019

Minor Features

• Support an open_url config setting in the pserve section of the config file. This url
is used to open a web browser when pserve --browser is invoked. When this setting
is unavailable the pserve script will attempt to guess the port the server is using from the
server:<server_name> section of the config file but there is no requirement that the server is
being run in this format so it may fail. See https://github.com/Pylons/pyramid/pull/2984

• The pyramid.config.Configurator can now be used as a context manager which will au-
tomatically push/pop threadlocals (similar to config.begin() and config.end()). It will
also automatically perform a config.commit() and thus it is only recommended to be used at
the top-level of your app. See https://github.com/Pylons/pyramid/pull/2874

• The threadlocals are now available inside any function invoked via config.include. This
means the only config-time code that cannot rely on threadlocals is code executed from non-
actions inside the main. This can be alleviated by invoking config.begin() and config.
end() appropriately or using the new context manager feature of the configurator. See https:
//github.com/Pylons/pyramid/pull/2989

0.6. Change History 991


The Pyramid Web Framework, Version 1.9.4

Bug Fixes

• HTTPException’s accepts a detail kwarg that may be used to pass additional details to the exception.
You may now pass objects so long as they have a valid __str__ method. See https://github.com/
Pylons/pyramid/pull/2951

• Fix a reference cycle causing memory leaks in which the registry would keep a Configurator
instance alive even after the configurator was discarded. Another fix was also added for the
global_registries object in which the registry was stored in a closure preventing it from
being deallocated. See https://github.com/Pylons/pyramid/pull/2967

• Fix a bug directly invoking pyramid.scripts.pserve.main with the --reload option


in which sys.argv is always used in the subprocess instead of the supplied argv. See https:
//github.com/Pylons/pyramid/pull/2962

Deprecations

• Pyramid currently depends on plaster_pastedeploy to simplify the transition to plaster


by maintaining integrated support for INI files. This dependency on plaster_pastedeploy
should be considered subject to Pyramid’s deprecation policy and may be removed in the future.
Applications should depend on the appropriate plaster binding to satisfy their needs.

• Retrieving CSRF token from the session has been deprecated in favor of equivalent methods
in the pyramid.csrf module. The CSRF methods (ISession.get_csrf_token and
ISession.new_csrf_token) are no longer required on the ISession interface except when
using the default pyramid.csrf.LegacySessionCSRFStoragePolicy.

Also, pyramid.session.check_csrf_token is now located at pyramid.csrf.


check_csrf_token.

See https://github.com/Pylons/pyramid/pull/2854 and https://github.com/Pylons/pyramid/pull/


3019

Documentation Changes

• Added the execution policy to the routing diagram in the Request Processing chapter. See https:
//github.com/Pylons/pyramid/pull/2993

992 Contents
The Pyramid Web Framework, Version 1.9.4

1.8 (2017-01-21)

• No major changes from 1.8b1.

1.8b1 (2017-01-17)

Features

• Added an override option to config.add_translation_dirs to allow later calls to place


translation directories at a higher priority than earlier calls. See https://github.com/Pylons/pyramid/
pull/2902

Documentation Changes

• Improve registry documentation to discuss uses as a component registry and as a dictionary. See
https://github.com/Pylons/pyramid/pull/2893

• Quick Tour, Quick Tutorial, and most other remaining documentation updated to use cookiecut-
ters instead of pcreate and scaffolds. See https://github.com/Pylons/pyramid/pull/2888 and https:
//github.com/Pylons/pyramid/pull/2889

• Fix unittests in wiki2 to work without different dependencies between py2 and py3. See https:
//github.com/Pylons/pyramid/pull/2899

• Update Windows documentation to track newer Python 3 improvements to the installer. See https:
//github.com/Pylons/pyramid/pull/2900

• Updated the mod_wsgi tutorial to use cookiecutters and Apache 2.4+. See https://github.com/
Pylons/pyramid/pull/2901

0.6. Change History 993


The Pyramid Web Framework, Version 1.9.4

1.8a1 (2016-12-25)

Backward Incompatibilities

• Support for the IContextURL interface that was deprecated in Pyramid 1.3 has been removed.
See https://github.com/Pylons/pyramid/pull/2822

• Following the Pyramid deprecation period (1.6 -> 1.8), daemon support for pserve has been removed.
This includes removing the daemon commands (start, stop, restart, status) as well as the following
arguments: --daemon, --pid-file, --log-file, --monitor-restart, --status,
--user, --group, --stop-daemon

To run your server as a daemon you should use a process manager instead of pserve.

See https://github.com/Pylons/pyramid/pull/2615

• pcreate is now interactive by default. You will be prompted if a file already exists with differ-
ent content. Previously if there were similar files it would silently skip them unless you specified
--interactive or --overwrite. See https://github.com/Pylons/pyramid/pull/2775

• Removed undocumented argument cachebust_match from pyramid.static.


static_view. This argument was shipped accidentally in Pyramid 1.6. See https:
//github.com/Pylons/pyramid/pull/2681

• Change static view to avoid setting the Content-Encoding response header to an encoding
guessed using Python’s mimetypes module. This was causing clients to decode the content of
gzipped files when downloading them. The client would end up with a foo.txt.gz file on disk
that was already decoded, thus should really be foo.txt. Also, the Content-Encoding should
only have been used if the client itself broadcast support for the encoding via Accept-Encoding
request headers. See https://github.com/Pylons/pyramid/pull/2810

• Settings are no longer accessible as attributes on the settings object (e.g. request.registry.
settings.foo). This was deprecated in Pyramid 1.2. See https://github.com/Pylons/pyramid/
pull/2823

994 Contents
The Pyramid Web Framework, Version 1.9.4

Features

• Python 3.6 compatibility. https://github.com/Pylons/pyramid/issues/2835

• pcreate learned about --package-name to allow you to create a new project in an existing
folder with a different package name than the project name. See https://github.com/Pylons/pyramid/
pull/2783

• The _get_credentials private method of BasicAuthAuthenticationPolicy


has been extracted into standalone function extract_http_basic_credentials in
pyramid.authentication module, this function extracts HTTP Basic credentials from a
request object, and returns them as a named tuple. See https://github.com/Pylons/pyramid/pull/
2662

• Pyramid 1.4 silently dropped a feature of the configurator that has been restored. It’s again possible
for action discriminators to conflict across different action orders. See https://github.com/Pylons/
pyramid/pull/2757

• pyramid.paster.bootstrap and its sibling pyramid.scripting.prepare can now


be used as context managers to automatically invoke the closer and pop threadlocals off of the
stack to prevent memory leaks. See https://github.com/Pylons/pyramid/pull/2760

• Added pyramid.config.Configurator.add_exception_view and the pyramid.


view.exception_view_config decorator. It is now possible using these methods or via the
new exception_only=True option to add_view to add a view which will only be matched
when handling an exception. Previously any exception views were also registered for a traversal
context that inherited from the exception class which prevented any exception-only optimizations.
See https://github.com/Pylons/pyramid/pull/2660

• Added the exception_only boolean to pyramid.interfaces.IViewDeriverInfo


which can be used by view derivers to determine if they are wrapping a view which only handles
exceptions. This means that it is no longer necessary to perform request-time checks for request.
exception to determine if the view is handling an exception - the pipeline can be optimized at
config-time. See https://github.com/Pylons/pyramid/pull/2660

• pserve should now work with gevent and other workers that need to monkeypatch the process,
assuming the server and / or the app do so as soon as possible before importing the rest of pyramid.
See https://github.com/Pylons/pyramid/pull/2797

• Pyramid no longer copies the settings object passed to the pyramid.config.


Configurator(settings=). The original dict is kept. See https://github.com/Pylons/
pyramid/pull/2823

0.6. Change History 995


The Pyramid Web Framework, Version 1.9.4

• The csrf trusted origins setting may now be a whitespace-separated list of domains. Previously only a
python list was allowed. Also, it can now be set using the PYRAMID_CSRF_TRUSTED_ORIGINS
environment variable similar to other settings. See https://github.com/Pylons/pyramid/pull/2823

• pserve --reload now uses the hupper <http://docs.pylonsproject.org/projects/hupper/en/latest/>


library to monitor file changes. This comes with many improvements:

– If the watchdog package is installed then monitoring will be done using inotify instead of cpu
and disk-intensive polling.

– The monitor is now a separate process that will not crash and starts up before any of your code.

– The monitor will not restart the process after a crash until a file is saved.

– The monitor works on windows.

– You can now trigger a reload manually from a pyramid view or any other code via hupper.
get_reloader().trigger_reload(). Kind of neat.

– You can trigger a reload by issuing a SIGHUP to the monitor process.

See https://github.com/Pylons/pyramid/pull/2805

• A new [pserve] section is supported in your config files with a watch_files key that can con-
figure pserve --reload to monitor custom file paths. See https://github.com/Pylons/pyramid/
pull/2827

• Allow streaming responses to be made from subclasses of pyramid.httpexceptions.


HTTPException. Previously the response would be unrolled while testing for a body, making
it impossible to stream a response. See https://github.com/Pylons/pyramid/pull/2863

• Update starter, alchemy and zodb scaffolds to support IPv6 by using the new listen directives in
waitress. See https://github.com/Pylons/pyramid/pull/2853

• All p* scripts now use argparse instead of optparse. This improves their --help output as well as
enabling nicer documentation of their options. See https://github.com/Pylons/pyramid/pull/2864

• Any deferred configuration action registered via config.action may now depend on threadlocal
state, such as asset overrides, being active when the action is executed. See https://github.com/
Pylons/pyramid/pull/2873

• Asset specifications for directories passed to config.add_translation_dirs now support


overriding the entire asset specification, including the folder name. Previously only the package
name was supported and the folder would always need to have the same name. See https://github.
com/Pylons/pyramid/pull/2873

• config.begin() will propagate the current threadlocal request through as long as the registry
is the same. For example:

996 Contents
The Pyramid Web Framework, Version 1.9.4

request = Request.blank(...)
config.begin(request) # pushes a request
config.begin() # propagates the previous request␣
,→through unchanged

assert get_current_request() is request

See https://github.com/Pylons/pyramid/pull/2873

• Added a new callback option to config.set_default_csrf_options which can be


used to determine per-request whether CSRF checking should be enabled to allow for a mix au-
thentication methods. Only cookie-based methods generally require CSRF checking. See https:
//github.com/Pylons/pyramid/pull/2778

Bug Fixes

• Fixed bug in proutes such that it now shows the correct view when a class and attr is involved.
See: https://github.com/Pylons/pyramid/pull/2687

• Fix a FutureWarning in Python 3.5 when using re.split on the format setting to the
proutes script. See https://github.com/Pylons/pyramid/pull/2714

• Fix a RuntimeWarning emitted by WebOb when using arbitrary objects as the userid in the
AuthTktAuthenticationPolicy. This is now caught by the policy and the object is serial-
ized as a base64 string to avoid the cryptic warning. Since the userid will be read back as a string
on subsequent requests a more useful warning is emitted encouraging you to use a primitive type
instead. See https://github.com/Pylons/pyramid/pull/2715

• Pyramid 1.6 introduced the ability for an action to invoke another action. There was a bug in the
way that config.add_view would interact with custom view derivers introduced in Pyramid 1.7
because the view’s discriminator cannot be computed until view derivers and view predicates have
been created in earlier orders. Invoking an action from another action would trigger an unrolling of
the pipeline and would compute discriminators before they were ready. The new behavior respects
the order of the action and ensures the discriminators are not computed until dependent actions
from previous orders have executed. See https://github.com/Pylons/pyramid/pull/2757

• Fix bug in i18n where the default domain would always use the Germanic plural style, even if a
different plural function is defined in the relevant messages file. See https://github.com/Pylons/
pyramid/pull/2859

• The config.override_asset method now occurs during pyramid.config.


PHASE1_CONFIG such that it is ordered to execute before any calls to config.
add_translation_dirs. See https://github.com/Pylons/pyramid/pull/2873

0.6. Change History 997


The Pyramid Web Framework, Version 1.9.4

Deprecations

• The pcreate script and related scaffolds have been deprecated in favor of the popular cookiecutter
project.

All of Pyramid’s official scaffolds as well as the tutorials have been ported to cookiecutters:

– pyramid-cookiecutter-starter

– pyramid-cookiecutter-alchemy

– pyramid-cookiecutter-zodb

See https://github.com/Pylons/pyramid/pull/2780

Documentation Changes

• Update Typographical Conventions. https://github.com/Pylons/pyramid/pull/2838

• Add pyramid_nacl_session to session factories. See https://github.com/Pylons/pyramid/issues/2791

• Update HACKING.txt from stale branch that was never merged to master. See https://github.com/
Pylons/pyramid/pull/2782

• Updated Windows installation instructions and related bits. See https://github.com/Pylons/pyramid/


issues/2661

• Fix an inconsistency in the documentation between view predicates and route predicates and high-
light the differences in their APIs. See https://github.com/Pylons/pyramid/pull/2764

• Clarify a possible misuse of the headers kwarg to subclasses of pyramid.


httpexceptions.HTTPException in which more appropriate kwargs from the
parent class pyramid.response.Response should be used instead. See https:
//github.com/Pylons/pyramid/pull/2750

• The SQLAlchemy + URL Dispatch + Jinja2 (wiki2) and ZODB + Traversal + Chameleon (wiki)
tutorials have been updated to utilize the new cookiecutters and drop support for the pcreate
scaffolds.

See https://github.com/Pylons/pyramid/pull/2881 and https://github.com/Pylons/pyramid/pull/


2883.

• Improve output of p* script descriptions for help. See https://github.com/Pylons/pyramid/pull/2886

• Quick Tour updated to use cookiecutters instead of pcreate and scaffolds. See https://github.com/
Pylons/pyramid/pull/2888

998 Contents
The Pyramid Web Framework, Version 1.9.4

1.7 (2016-05-19)

• Fix a bug in the wiki2 tutorial where bcrypt is always expecting byte strings. See https://github.com/
Pylons/pyramid/pull/2576

• Simplify windows detection code and remove some duplicated data. See https://github.com/Pylons/
pyramid/pull/2585 and https://github.com/Pylons/pyramid/pull/2586

1.7b4 (2016-05-12)

• Fixed the exception view tween to re-raise the original exception if no exception view could be found
to handle the exception. This better allows tweens further up the chain to handle exceptions that were
left unhandled. Previously they would be converted into a PredicateMismatch exception if
predicates failed to allow the view to handle the exception. See https://github.com/Pylons/pyramid/
pull/2567

• Exposed the pyramid.interfaces.IRequestFactory interface to mirror the public


pyramid.interfaces.IResponseFactory interface.

1.7b3 (2016-05-10)

• Fix request.invoke_exception_view to raise an HTTPNotFound exception if no


view is matched. Previously None would be returned if no views were matched and a
PredicateMismatch would be raised if a view ”almost” matched (a view was found match-
ing the context). See https://github.com/Pylons/pyramid/pull/2564

• Add defaults for py.test configuration and coverage to all three scaffolds, and update documentation
accordingly. See https://github.com/Pylons/pyramid/pull/2550

• Add linkcheck to Makefile for Sphinx. To check the documentation for broken links, use
the command make linkcheck SPHINXBUILD=$VENV/bin/sphinx-build. Also re-
moved and fixed dozens of broken external links.

• Fix the internal runner for scaffold tests to ensure they work with pip and py.test. See https://github.
com/Pylons/pyramid/pull/2565

0.6. Change History 999


The Pyramid Web Framework, Version 1.9.4

1.7b2 (2016-05-01)

• Removed inclusion of pyramid_tm in development.ini for alchemy scaffold See https://github.com/


Pylons/pyramid/issues/2538

• A default permission set via config.set_default_permission will no longer be enforced


on an exception view. This has been the case for a while with the default exception views (config.
add_notfound_view and config.add_forbidden_view), however for any other excep-
tion view a developer had to remember to set permission=NO_PERMISSION_REQUIRED or
be surprised when things didn’t work. It is still possible to force a permission check on an exception
view by setting the permission argument manually to config.add_view. This behavior
is consistent with the new CSRF features added in the 1.7 series. See https://github.com/Pylons/
pyramid/pull/2534

1.7b1 (2016-04-25)

• This release announces the beta period for 1.7.

• Fix an issue where some files were being included in the alchemy scafffold which had been removed
from the 1.7 series. See https://github.com/Pylons/pyramid/issues/2525

1.7a2 (2016-04-19)

Features

• Automatic CSRF checks are now disabled by default on exception views. They can be turned back on
by setting the appropriate require_csrf option on the view. See https://github.com/Pylons/pyramid/
pull/2517

• The automatic CSRF API was reworked to use a config directive for setting the options. The
pyramid.require_default_csrf setting is no longer supported. Instead, a new config.
set_default_csrf_options directive has been introduced that allows the developer to spec-
ify the default value for require_csrf as well as change the CSRF token, header and safe
request methods. The pyramid.csrf_trusted_origins setting is still supported. See
https://github.com/Pylons/pyramid/pull/2518

1000 Contents
The Pyramid Web Framework, Version 1.9.4

Bug fixes

• CSRF origin checks had a bug causing the checks to always fail. See https://github.com/Pylons/
pyramid/pull/2512

• Fix the test suite to pass on windows. See https://github.com/Pylons/pyramid/pull/2520

1.7a1 (2016-04-16)

Backward Incompatibilities

• Following the Pyramid deprecation period (1.4 -> 1.6), AuthTktAuthenticationPolicy’s default hash-
ing algorithm is changing from md5 to sha512. If you are using the authentication policy and need
to continue using md5, please explicitly set hashalg to ’md5’.

This change does mean that any existing auth tickets (and associated cookies) will no longer be valid,
and users will no longer be logged in, and have to login to their accounts again.

See https://github.com/Pylons/pyramid/pull/2496

• The check_csrf_token function no longer validates a csrf token in the query string of a request.
Only headers and request bodies are supported. See https://github.com/Pylons/pyramid/pull/2500

Features

• Added a new setting, pyramid.require_default_csrf which may be used to turn on CSRF


checks globally for every POST request in the application. This should be considered a good default
for websites built on Pyramid. It is possible to opt-out of CSRF checks on a per-view basis by setting
require_csrf=False on those views. See https://github.com/Pylons/pyramid/pull/2413

• Added a require_csrf view option which will enforce CSRF checks on any request with an
unsafe method as defined by RFC2616. If the CSRF check fails a BadCSRFToken exception will
be raised and may be caught by exception views (the default response is a 400 Bad Request).
This option should be used in place of the deprecated check_csrf view predicate which would
normally result in unexpected 404 Not Found response to the client instead of a catchable ex-
ception. See https://github.com/Pylons/pyramid/pull/2413 and https://github.com/Pylons/pyramid/
pull/2500

0.6. Change History 1001


The Pyramid Web Framework, Version 1.9.4

• Added an additional CSRF validation that checks the origin/referrer of a request and makes sure it
matches the current request.domain. This particular check is only active when accessing a site
over HTTPS as otherwise browsers don’t always send the required information. If this additional
CSRF validation fails a BadCSRFOrigin exception will be raised and may be caught by exception
views (the default response is 400 Bad Request). Additional allowed origins may be configured
by setting pyramid.csrf_trusted_origins to a list of domain names (with ports if on a
non standard port) to allow. Subdomains are not allowed unless the domain name has been prefixed
with a .. See https://github.com/Pylons/pyramid/pull/2501

• Added a new pyramid.session.check_csrf_origin API for validating the origin or re-


ferrer headers against the request’s domain. See https://github.com/Pylons/pyramid/pull/2501

• Pyramid HTTPExceptions will now take into account the best match for the clients Accept header,
and depending on what is requested will return text/html, application/json or text/plain. The default
for / is still text/html, but if application/json is explicitly mentioned it will now receive a valid JSON
response. See https://github.com/Pylons/pyramid/pull/2489

• A new event and interface (BeforeTraversal) has been introduced that will notify listeners before
traversal starts in the router. See https://github.com/Pylons/pyramid/pull/2469 and https://github.
com/Pylons/pyramid/pull/1876

• Add a new ”view deriver” concept to Pyramid to allow framework authors to inject elements into the
standard Pyramid view pipeline and affect all views in an application. This is similar to a decorator
except that it has access to options passed to config.add_view and can affect other stages of
the pipeline such as the raw response from a view or prior to security checks. See https://github.
com/Pylons/pyramid/pull/2021

• Allow a leading = on the key of the request param predicate. For example, ’=abc=1’ is equivalent
down to request.params['=abc'] == '1'. See https://github.com/Pylons/pyramid/pull/
1370

• A new request.invoke_exception_view(...) method which can be used to invoke an


exception view and get back a response. This is useful for rendering an exception view outside of
the context of the excview tween where you may need more control over the request. See https:
//github.com/Pylons/pyramid/pull/2393

• Allow using variable substitutions like %(LOGGING_LOGGER_ROOT_LEVEL)s for logging


sections of the .ini file and populate these variables from the pserve command line –
e.g.: pserve development.ini LOGGING_LOGGER_ROOT_LEVEL=DEBUG See https:
//github.com/Pylons/pyramid/pull/2399

1002 Contents
The Pyramid Web Framework, Version 1.9.4

Documentation Changes

• A complete overhaul of the docs:

– Use pip instead of easy_install.

– Become opinionated by preferring Python 3.4 or greater to simplify installation of Python and
its required packaging tools.

– Use venv for the tool, and virtual environment for the thing created, instead of virtualenv.

– Use py.test and pytest-cov instead of nose and coverage.

– Further updates to the scaffolds as well as tutorials and their src files.

See https://github.com/Pylons/pyramid/pull/2468

• A complete overhaul of the alchemy scaffold as well as the Wiki2 SQLAlchemy + URLDispatch
tutorial to introduce more modern features into the usage of SQLAlchemy with Pyramid and provide
a better starting point for new projects. See https://github.com/Pylons/pyramid/pull/2024

Bug Fixes

• Fix pserve --browser to use the --server-name instead of the app name when selecting
a section to use. This was only working for people who had server and app sections with the same
name, for example [app:main] and [server:main]. See https://github.com/Pylons/pyramid/
pull/2292

Deprecations

• The check_csrf view predicate has been deprecated. Use the new require_csrf option or
the pyramid.require_default_csrf setting to ensure that the BadCSRFToken exception
is raised. See https://github.com/Pylons/pyramid/pull/2413

• Support for Python 3.3 will be removed in Pyramid 1.8. https://github.com/Pylons/pyramid/issues/


2477

• Python 2.6 is no longer supported by Pyramid. See https://github.com/Pylons/pyramid/issues/2368

• Dropped Python 3.2 support. See https://github.com/Pylons/pyramid/pull/2256

0.6. Change History 1003


The Pyramid Web Framework, Version 1.9.4

1.6 (2016-01-03)

Deprecations

• Continue removal of pserve daemon/process management features by deprecating --user and


--group options. See https://github.com/Pylons/pyramid/pull/2190

1.6b3 (2015-12-17)

Backward Incompatibilities

• Remove the cachebust option from config.add_static_view. See config.


add_cache_buster for the new way to attach cache busters to static assets. See https://github.
com/Pylons/pyramid/pull/2186

• Modify the pyramid.interfaces.ICacheBuster API to be a simple callable instead of


an object with match and pregenerate methods. Cache busters are now focused solely on
generation. Matching has been dropped.

Note this affects usage of pyramid.static.QueryStringCacheBuster and pyramid.


static.ManifestCacheBuster.

See https://github.com/Pylons/pyramid/pull/2186

Features

• Add a new config.add_cache_buster API for attaching cache busters to static assets. See
https://github.com/Pylons/pyramid/pull/2186

Bug Fixes

• Ensure that IAssetDescriptor.abspath always returns an absolute path. There were cases
depending on the process CWD that a relative path would be returned. See https://github.com/
Pylons/pyramid/issues/2188

1004 Contents
The Pyramid Web Framework, Version 1.9.4

1.6b2 (2015-10-15)

Features

• Allow asset specifications to be supplied to pyramid.static.ManifestCacheBuster in-


stead of requiring a filesystem path.

1.6b1 (2015-10-15)

Backward Incompatibilities

• IPython and BPython support have been removed from pshell in the core. To continue using them
on Pyramid 1.6+ you must install the binding packages explicitly:

$ pip install pyramid_ipython

or

$ pip install pyramid_bpython

• Remove default cache busters introduced in 1.6a1 including PathSegmentCacheBuster,


PathSegmentMd5CacheBuster, and QueryStringMd5CacheBuster. See https://
github.com/Pylons/pyramid/pull/2116

Features

• Additional shells for pshell can now be registered as entrypoints. See https://github.com/Pylons/
pyramid/pull/1891 and https://github.com/Pylons/pyramid/pull/2012
• The variables injected into pshell are now displayed with their docstrings instead of the default
str(obj) when possible. See https://github.com/Pylons/pyramid/pull/1929
• Add new pyramid.static.ManifestCacheBuster for use with external asset pipelines as
well as examples of common usages in the narrative. See https://github.com/Pylons/pyramid/pull/
2116
• Fix pserve --reload to not crash on syntax errors!!! See https://github.com/Pylons/pyramid/
pull/2125
• Fix an issue when user passes unparsed strings to pyramid.session.CookieSession
and pyramid.authentication.AuthTktCookieHelper for time related parameters
timeout, reissue_time, max_age that expect an integer value. See https://github.com/
Pylons/pyramid/pull/2050

0.6. Change History 1005


The Pyramid Web Framework, Version 1.9.4

Bug Fixes

• pyramid.httpexceptions.HTTPException now defaults to 520 Unknown Error in-


stead of None None to conform with changes in WebOb 1.5. See https://github.com/Pylons/
pyramid/pull/1865

• pshell will now preserve the capitalization of variables in the [pshell] section of the INI file.
This makes exposing classes to the shell a little more straightfoward. See https://github.com/Pylons/
pyramid/pull/1883

• Fixed usage of pserve --monitor-restart --daemon which would fail in horrible ways.
See https://github.com/Pylons/pyramid/pull/2118

• Explicitly prevent pserve --reload --daemon from being used. It’s never been supported
but would work and fail in weird ways. See https://github.com/Pylons/pyramid/pull/2119

• Fix an issue on Windows when running pserve --reload in which the process failed to fork
because it could not find the pserve script to run. See https://github.com/Pylons/pyramid/pull/2138

Deprecations

• Deprecate pserve --monitor-restart in favor of user’s using a real process manager such
as Systemd or Upstart as well as Python-based solutions like Circus and Supervisor. See https:
//github.com/Pylons/pyramid/pull/2120

1.6a2 (2015-06-30)

Bug Fixes

• Ensure that pyramid.httpexceptions.exception_response returns the appropriate


”concrete” class for 400 and 500 status codes. See https://github.com/Pylons/pyramid/issues/1832

• Fix an infinite recursion bug introduced in 1.6a1 when pyramid.view.


render_view_to_response was called directly or indirectly. See https://github.com/
Pylons/pyramid/issues/1643

• Further fix the JSONP renderer by prefixing the returned content with a comment. This should
mitigate attacks from Flash (See CVE-2014-4671). See https://github.com/Pylons/pyramid/pull/
1649

• Allow periods and brackets ([]) in the JSONP callback. The original fix was overly-restrictive and
broke Angular. See https://github.com/Pylons/pyramid/pull/1649

1006 Contents
The Pyramid Web Framework, Version 1.9.4

1.6a1 (2015-04-15)

Features

• pcreate will now ask for confirmation if invoked with an argument for a project name that already
exists or is importable in the current environment. See https://github.com/Pylons/pyramid/issues/
1357 and https://github.com/Pylons/pyramid/pull/1837

• Make it possible to subclass pyramid.request.Request and also use pyramid.


request.Request.add_request.method. See https://github.com/Pylons/pyramid/
issues/1529

• The pyramid.config.Configurator has grown the ability to allow actions to call other
actions during a commit-cycle. This enables much more logic to be placed into actions, such as the
ability to invoke other actions or group them for improved conflict detection. We have also exposed
and documented the config phases that Pyramid uses in order to further assist in building conforming
addons. See https://github.com/Pylons/pyramid/pull/1513

• Add pyramid.request.apply_request_extensions function which can be used in


testing to apply any request extensions configured via config.add_request_method. Pre-
viously it was only possible to test the extensions by going through Pyramid’s router. See https:
//github.com/Pylons/pyramid/pull/1581

• pcreate when run without a scaffold argument will now print information on the missing flag, as
well as a list of available scaffolds. See https://github.com/Pylons/pyramid/pull/1566 and https:
//github.com/Pylons/pyramid/issues/1297

• Added support / testing for ’pypy3’ under Tox and Travis. See https://github.com/Pylons/pyramid/
pull/1469

• Automate code coverage metrics across py2 and py3 instead of just py2. See https://github.com/
Pylons/pyramid/pull/1471

• Cache busting for static resources has been added and is available via a new argument to pyramid.
config.Configurator.add_static_view: cachebust. Core APIs are shipped for
both cache busting via query strings and path segments and may be extended to fit into custom
asset pipelines. See https://github.com/Pylons/pyramid/pull/1380 and https://github.com/Pylons/
pyramid/pull/1583

• Add pyramid.config.Configurator.root_package attribute and init parameter to as-


sist with includeable packages that wish to resolve resources relative to the package in which the
Configurator was created. This is especially useful for addons that need to load asset specs
from settings, in which case it is may be natural for a developer to define imports or assets relative
to the top-level package. See https://github.com/Pylons/pyramid/pull/1337

0.6. Change History 1007


The Pyramid Web Framework, Version 1.9.4

• Added line numbers to the log formatters in the scaffolds to assist with debugging. See https://github.
com/Pylons/pyramid/pull/1326

• Add new HTTP exception objects for status codes 428 Precondition Required, 429
Too Many Requests and 431 Request Header Fields Too Large in pyramid.
httpexceptions. See https://github.com/Pylons/pyramid/pull/1372/files

• The pshell script will now load a PYTHONSTARTUP file if one is defined in the environment
prior to launching the interpreter. See https://github.com/Pylons/pyramid/pull/1448

• Make it simple to define notfound and forbidden views that wish to use the default exception-
response view but with altered predicates and other configuration options. The view argument
is now optional in config.add_notfound_view and config.add_forbidden_view..
See https://github.com/Pylons/pyramid/issues/494

• Greatly improve the readability of the pcreate shell script output. See https://github.com/Pylons/
pyramid/pull/1453

• Improve robustness to timing attacks in the AuthTktCookieHelper and the


SignedCookieSessionFactory classes by using the stdlib’s hmac.compare_digest if
it is available (such as Python 2.7.7+ and 3.3+). See https://github.com/Pylons/pyramid/pull/1457

• Assets can now be overidden by an absolute path on the filesystem when using the config.
override_asset API. This makes it possible to fully support serving up static content
from a mutable directory while still being able to use the request.static_url API
and config.add_static_view. Previously it was not possible to use config.
add_static_view with an absolute path and generate urls to the content. This
change replaces the call, config.add_static_view('/abs/path', 'static'),
with config.add_static_view('myapp:static', 'static') and config.
override_asset(to_override='myapp:static/', override_with='/abs/
path/'). The myapp:static asset spec is completely made up and does not need to exist - it
is used for generating urls via request.static_url('myapp:static/foo.png'). See
https://github.com/Pylons/pyramid/issues/1252

• Added pyramid.config.Configurator.set_response_factory and the


response_factory keyword argument to the Configurator for defining a factory
that will return a custom Response class. See https://github.com/Pylons/pyramid/pull/1499

• Allow an iterator to be returned from a renderer. Previously it was only possible to return bytes or
unicode. See https://github.com/Pylons/pyramid/pull/1417

• pserve can now take a -b or --browser option to open the server URL in a web browser. See
https://github.com/Pylons/pyramid/pull/1533

1008 Contents
The Pyramid Web Framework, Version 1.9.4

• Overall improvments for the proutes command. Added --format and --glob arguments
to the command, introduced the method column for displaying available request methods, and
improved the view output by showing the module instead of just __repr__. See https://github.
com/Pylons/pyramid/pull/1488

• Support keyword-only arguments and function annotations in views in Python 3. See https://github.
com/Pylons/pyramid/pull/1556

• request.response will no longer be mutated when using the pyramid.renderers.


render_to_response() API. It is now necessary to pass in a response= argument to
render_to_response if you wish to supply the renderer with a custom response object
for it to use. If you do not pass one then a response object will be created using the appli-
cation’s IResponseFactory. Almost all renderers mutate the request.response re-
sponse object (for example, the JSON renderer sets request.response.content_type to
application/json). However, when invoking render_to_response it is not expected
that the response object being returned would be the same one used later in the request. The re-
sponse object returned from render_to_response is now explicitly different from request.
response. This does not change the API of a renderer. See https://github.com/Pylons/pyramid/
pull/1563

• The append_slash argument of `Configurator().add_notfound_view() will now


accept anything that implements the IResponse interface and will use that as the response class
instead of the default HTTPFound. See https://github.com/Pylons/pyramid/pull/1610

Bug Fixes

• The JSONP renderer created JavaScript code in such a way that a callback variable could be used to
arbitrarily inject javascript into the response object. https://github.com/Pylons/pyramid/pull/1627

• Work around an issue where pserve --reload would leave terminal echo disabled if it reloaded
during a pdb session. See https://github.com/Pylons/pyramid/pull/1577, https://github.com/Pylons/
pyramid/pull/1592

• pyramid.wsgi.wsgiapp and pyramid.wsgi.wsgiapp2 now raise ValueError when


accidentally passed None. See https://github.com/Pylons/pyramid/pull/1320

• Fix an issue whereby predicates would be resolved as maybe_dotted in the introspectable but not
when passed for registration. This would mean that add_route_predicate for example can
not take a string and turn it into the actual callable function. See https://github.com/Pylons/pyramid/
pull/1306

0.6. Change History 1009


The Pyramid Web Framework, Version 1.9.4

• Fix pyramid.testing.setUp to return a Configurator with a proper package. Previ-


ously it was not possible to do package-relative includes using the returned Configurator dur-
ing testing. There is now a package argument that can override this behavior as well. See
https://github.com/Pylons/pyramid/pull/1322

• Fix an issue where a pyramid.response.FileResponse may apply a charset where it does


not belong. See https://github.com/Pylons/pyramid/pull/1251

• Work around a bug introduced in Python 2.7.7 on Windows where mimetypes.guess_type


returns Unicode rather than str for the content type, unlike any previous version of Python. See
https://github.com/Pylons/pyramid/issues/1360 for more information.

• pcreate now normalizes the package name by converting hyphens to underscores. See https:
//github.com/Pylons/pyramid/pull/1376

• Fix an issue with the final response/finished callback being unable to add another callback to the
list. See https://github.com/Pylons/pyramid/pull/1373

• Fix a failing unittest caused by differing mimetypes across various OSs. See https://github.com/
Pylons/pyramid/issues/1405

• Fix route generation for static view asset specifications having no path. See https://github.com/
Pylons/pyramid/pull/1377

• Allow the pyramid.renderers.JSONP renderer to work even if there is no valid request ob-
ject. In this case it will not wrap the object in a callback and thus behave just like the pyramid.
renderers.JSON renderer. See https://github.com/Pylons/pyramid/pull/1561

• Prevent ”parameters to load are deprecated” DeprecationWarning from setuptools>=11.3. See


https://github.com/Pylons/pyramid/pull/1541

• Avoiding sharing the IRenderer objects across threads when attached to a view using the ren-
derer= argument. These renderers were instantiated at time of first render and shared between re-
quests, causing potentially subtle effects like pyramid.reload_templates = true failing to work in
pyramid_mako. See https://github.com/Pylons/pyramid/pull/1575 and https://github.com/Pylons/
pyramid/issues/1268

• Avoiding timing attacks against CSRF tokens. See https://github.com/Pylons/pyramid/pull/1574

• request.finished_callbacks and request.response_callbacks now default to


an iterable instead of None. It may be checked for a length of 0. This was the behavior in 1.5.

1010 Contents
The Pyramid Web Framework, Version 1.9.4

Deprecations

• The pserve command’s daemonization features have been deprecated. This includes
the [start,stop,restart,status] subcommands as well as the --daemon,
--stop-server, --pid-file, and --status flags.
Please use a real process manager in the future instead of relying on the pserve to daemonize itself.
Many options exist including your Operating System’s services such as Systemd or Upstart, as well
as Python-based solutions like Circus and Supervisor.
See https://github.com/Pylons/pyramid/pull/1641
• Renamed the principal argument to pyramid.security.remember() to userid in or-
der to clarify its intended purpose. See https://github.com/Pylons/pyramid/pull/1399

Docs

• Moved the documentation for accept on Configurator.add_view to no longer be part of


the predicate list. See https://github.com/Pylons/pyramid/issues/1391 for a bug report stating not_
was failing on accept. Discussion with @mcdonc led to the conclusion that it should not be
documented as a predicate. See https://github.com/Pylons/pyramid/pull/1487 for this PR
• Removed logging configuration from Quick Tutorial ini files except for scaffolding- and logging-
related chapters to avoid needing to explain it too early.
• Clarify a previously-implied detail of the ISession.invalidate API documentation.
• Improve and clarify the documentation on what Pyramid defines as a principal and a userid
in its security APIs. See https://github.com/Pylons/pyramid/pull/1399
• Add documentation of command line programs (p* scripts). See https://github.com/Pylons/
pyramid/pull/2191

Scaffolds

• Update scaffold generating machinery to return the version of pyramid and pyramid docs for use in
scaffolds. Updated starter, alchemy and zodb templates to have links to correctly versioned docu-
mentation and reflect which pyramid was used to generate the scaffold.
• Removed non-ascii copyright symbol from templates, as this was causing the scaffolds to fail for
project generation.
• You can now run the scaffolding func tests via tox py2-scaffolds and tox
py3-scaffolds.

0.6. Change History 1011


The Pyramid Web Framework, Version 1.9.4

1.5 (2014-04-08)

• Python 3.4 compatibility.

• Avoid crash in pserve --reload under Py3k, when iterating over possibly mutated sys.
modules.

• UnencryptedCookieSessionFactoryConfig failed if the secret contained higher order


characters. See https://github.com/Pylons/pyramid/issues/1246

• Fixed a bug in UnencryptedCookieSessionFactoryConfig and


SignedCookieSessionFactory where timeout=None would cause a new session
to always be created. Also in SignedCookieSessionFactory a reissue_time=None
would cause an exception when modifying the session. See https://github.com/Pylons/pyramid/
issues/1247

• Updated docs and scaffolds to keep in step with new 2.0 release of Lingua. This included removing
all setup.cfg files from scaffolds and documentation environments.

1.5b1 (2014-02-08)

Features

• We no longer eagerly clear request.exception and request.exc_info in the exception


view tween. This makes it possible to inspect exception information within a finished callback. See
https://github.com/Pylons/pyramid/issues/1223.

1.5a4 (2014-01-28)

Features

• Updated scaffolds with new theme, fixed documentation and sample project.

1012 Contents
The Pyramid Web Framework, Version 1.9.4

Bug Fixes

• Depend on a newer version of WebOb so that we pull in some crucial bug-fixes that were showstop-
pers for functionality in Pyramid.

• Add a trailing semicolon to the JSONP response. This fixes JavaScript syntax errors for old IE
versions. See https://github.com/Pylons/pyramid/pull/1205

• Fix a memory leak when the configurator’s set_request_property method was used or when
the configurator’s add_request_method method was used with the property=True at-
tribute. See https://github.com/Pylons/pyramid/issues/1212 .

1.5a3 (2013-12-10)

Features

• An authorization API has been added as a method of the request: request.has_permission.

request.has_permission is a method-based alternative to the pyramid.security.


has_permission API and works exactly the same. The older API is now deprecated.

• Property API attributes have been added to the request for easier access to authentication
data: request.authenticated_userid, request.unauthenticated_userid, and
request.effective_principals.

These are analogues, respectively, of pyramid.security.authenticated_userid,


pyramid.security.unauthenticated_userid, and pyramid.security.
effective_principals. They operate exactly the same, except they are attributes of
the request instead of functions accepting a request. They are properties, so they cannot be assigned
to. The older function-based APIs are now deprecated.

• Pyramid’s console scripts (pserve, pviews, etc) can now be run directly, allowing custom argu-
ments to be sent to the python interpreter at runtime. For example:

python -3 -m pyramid.scripts.pserve development.ini

• Added a specific subclass of HTTPBadRequest named pyramid.exceptions.


BadCSRFToken which will now be raised in response to failures in check_csrf_token. See
https://github.com/Pylons/pyramid/pull/1149

0.6. Change History 1013


The Pyramid Web Framework, Version 1.9.4

• Added a new SignedCookieSessionFactory which is very similar to the


UnencryptedCookieSessionFactoryConfig but with a clearer focus on sign-
ing content. The custom serializer arguments to this function should only focus on se-
rializing, unlike its predecessor which required the serializer to also perform signing.
See https://github.com/Pylons/pyramid/pull/1142 . Note that cookies generated using
SignedCookieSessionFactory are not compatible with cookies generated using
UnencryptedCookieSessionFactory, so existing user session data will be destroyed
if you switch to it.

• Added a new BaseCookieSessionFactory which acts as a generic cookie factory that can be
used by framework implementors to create their own session implementations. It provides a reusable
API which focuses strictly on providing a dictionary-like object that properly handles renewals, time-
outs, and conformance with the ISession API. See https://github.com/Pylons/pyramid/pull/1142

• The anchor argument to pyramid.request.Request.route_url and pyramid.


request.Request.resource_url and their derivatives will now be escaped via URL quot-
ing to ensure minimal conformance. See https://github.com/Pylons/pyramid/pull/1183

• Allow sending of _query and _anchor options to pyramid.request.Request.


static_url when an external URL is being generated. See https://github.com/Pylons/pyramid/
pull/1183

• You can now send a string as the _query argument to pyramid.request.Request.


route_url and pyramid.request.Request.resource_url and their derivatives.
When a string is sent instead of a list or dictionary. it is URL-quoted however it does not need
to be in k=v form. This is useful if you want to be able to use a different query string format than
x-www-form-urlencoded. See https://github.com/Pylons/pyramid/pull/1183

• pyramid.testing.DummyRequest now has a domain attribute to match the new WebOb


1.3 API. Its value is example.com.

Bug Fixes

• Fix the pcreate script so that when the target directory name ends with a slash it does not produce
a non-working project directory structure. Previously saying pcreate -s starter /foo/
bar/ produced different output than saying pcreate -s starter /foo/bar. The former
did not work properly.

• Fix the principals_allowed_by_permission method of


ACLAuthorizationPolicy so it anticipates a callable __acl__ on resources. Previ-
ously it did not try to call the __acl__ if it was callable.

1014 Contents
The Pyramid Web Framework, Version 1.9.4

• The pviews script did not work when a url required custom request methods in order to perform
traversal. Custom methods and descriptors added via pyramid.config.Configurator.
add_request_method will now be present, allowing traversal to continue. See https://github.
com/Pylons/pyramid/issues/1104

• Remove unused renderer argument from Configurator.add_route.

• Allow the BasicAuthenticationPolicy to work with non-ascii usernames and passwords.


The charset is not passed as part of the header and different browsers alternate between UTF-8 and
Latin-1, so the policy now attempts to decode with UTF-8 first, and will fallback to Latin-1. See
https://github.com/Pylons/pyramid/pull/1170

• The @view_defaults now apply to notfound and forbidden views that are defined as methods
of a decorated class. See https://github.com/Pylons/pyramid/issues/1173

Documentation

• Added a ”Quick Tutorial” to go with the Quick Tour

• Removed mention of pyramid_beaker from docs. Beaker is no longer maintained. Point people
at pyramid_redis_sessions instead.

• Add documentation for pyramid.interfaces.IRendererFactory and pyramid.


interfaces.IRenderer.

Backwards Incompatibilities

• The key/values in the _query parameter of request.route_url and the query parameter
of request.resource_url (and their variants), used to encode a value of None as the string
'None', leaving the resulting query string to be a=b&key=None. The value is now dropped in this
situation, leaving a query string of a=b&key=. See https://github.com/Pylons/pyramid/issues/1119

0.6. Change History 1015


The Pyramid Web Framework, Version 1.9.4

Deprecations

• Deprecate the pyramid.interfaces.ITemplateRenderer interface. It was ill-defined


and became unused when Mako and Chameleon template bindings were split into their own pack-
ages.

• The pyramid.session.UnencryptedCookieSessionFactoryConfig
API has been deprecated and is superseded by the pyramid.session.
SignedCookieSessionFactory. Note that while the cookies generated by the
UnencryptedCookieSessionFactoryConfig are compatible with cookies gener-
ated by old releases, cookies generated by the SignedCookieSessionFactory are not. See
https://github.com/Pylons/pyramid/pull/1142

• The pyramid.security.has_permission API is now deprecated. Instead, use the newly-


added has_permission method of the request object.

• The pyramid.security.effective_principals API is now deprecated. Instead, use


the newly-added effective_principals attribute of the request object.

• The pyramid.security.authenticated_userid API is now deprecated. Instead, use


the newly-added authenticated_userid attribute of the request object.

• The pyramid.security.unauthenticated_userid API is now deprecated. Instead, use


the newly-added unauthenticated_userid attribute of the request object.

Dependencies

• Pyramid now depends on WebOb>=1.3 (it uses webob.cookies.CookieProfile from 1.3+).

1.5a2 (2013-09-22)

Features

• Users can now provide dotted Python names to as the factory argument the Configurator meth-
ods named add_{view,route,subscriber}_predicate (instead of passing the predicate
factory directly, you can pass a dotted name which refers to the factory).

1016 Contents
The Pyramid Web Framework, Version 1.9.4

Bug Fixes

• Fix an exception in pyramid.path.package_name when resolving the package name for


namespace packages that had no __file__ attribute.

Backwards Incompatibilities

• Pyramid no longer depends on or configures the Mako and Chameleon templating system renderers
by default. Disincluding these templating systems by default means that the Pyramid core has fewer
dependencies and can run on future platforms without immediate concern for the compatibility of
its templating add-ons. It also makes maintenance slightly more effective, as different people can
maintain the templating system add-ons that they understand and care about without needing commit
access to the Pyramid core, and it allows users who just don’t want to see any packages they don’t
use come along for the ride when they install Pyramid.

This means that upon upgrading to Pyramid 1.5a2+, projects that use either of these templating
systems will see a traceback that ends something like this when their application attempts to render
a Chameleon or Mako template:

ValueError: No such renderer factory .pt

Or:

ValueError: No such renderer factory .mako

Or:

ValueError: No such renderer factory .mak

Support for Mako templating has been moved into an add-on package named pyramid_mako,
and support for Chameleon templating has been moved into an add-on package named
pyramid_chameleon. These packages are drop-in replacements for the old built-in support
for these templating langauges. All you have to do is install them and make them active in your con-
figuration to register renderer factories for .pt and/or .mako (or .mak) to make your application
work again.

To re-add support for Chameleon and/or Mako template renderers into your existing projects, follow
the below steps.

If you depend on Mako templates:

0.6. Change History 1017


The Pyramid Web Framework, Version 1.9.4

– Make sure the pyramid_mako package is installed. One way to do this is by adding
pyramid_mako to the install_requires section of your package’s setup.py file
and afterwards rerunning setup.py develop:

setup(
#...
install_requires=[
'pyramid_mako', # new dependency
'pyramid',
#...
],
)

– Within the portion of your application which instantiates a Pyramid pyramid.config.


Configurator (often the main() function in your project’s __init__.py file), tell
Pyramid to include the pyramid_mako includeme:

config = Configurator(.....)
config.include('pyramid_mako')

If you depend on Chameleon templates:

– Make sure the pyramid_chameleon package is installed. One way to do this is by adding
pyramid_chameleon to the install_requires section of your package’s setup.
py file and afterwards rerunning setup.py develop:

setup(
#...
install_requires=[
'pyramid_chameleon', # new dependency
'pyramid',
#...
],
)

– Within the portion of your application which instantiates a Pyramid ~pyramid.config.


Configurator (often the main() function in your project’s __init__.py file), tell
Pyramid to include the pyramid_chameleon includeme:

1018 Contents
The Pyramid Web Framework, Version 1.9.4

config = Configurator(.....)
config.include('pyramid_chameleon')

Note that it’s also fine to install these packages into older Pyramids for forward compatibility pur-
poses. Even if you don’t upgrade to Pyramid 1.5 immediately, performing the above steps in a
Pyramid 1.4 installation is perfectly fine, won’t cause any difference, and will give you forward
compatibility when you eventually do upgrade to Pyramid 1.5.

With the removal of Mako and Chameleon support from the core, some unit tests that use
the pyramid.renderers.render* methods may begin to fail. If any of your unit
tests are invoking either pyramid.renderers.render() or pyramid.renderers.
render_to_response() with either Mako or Chameleon templates then the pyramid.
config.Configurator instance in effect during the unit test should be also be updated to
include the addons, as shown above. For example:

class ATest(unittest.TestCase):
def setUp(self):
self.config = pyramid.testing.setUp()
self.config.include('pyramid_mako')

def test_it(self):
result = pyramid.renderers.render('mypkg:templates/home.
,→mako', {})

Or:

class ATest(unittest.TestCase):
def setUp(self):
self.config = pyramid.testing.setUp()
self.config.include('pyramid_chameleon')

def test_it(self):
result = pyramid.renderers.render('mypkg:templates/home.
,→pt', {})

• If you’re using the Pyramid debug toolbar, when you upgrade Pyramid to 1.5a2+, you’ll also need to
upgrade the pyramid_debugtoolbar package to at least version 1.0.8, as older toolbar versions
are not compatible with Pyramid 1.5a2+ due to the removal of Mako support from the core. It’s fine
to use this newer version of the toolbar code with older Pyramids too.

0.6. Change History 1019


The Pyramid Web Framework, Version 1.9.4

• Removed the request.response_* varying attributes. These attributes have been deprecated
since Pyramid 1.1, and as per the deprecation policy, have now been removed.

• request.response will no longer be mutated when using the pyramid.renderers.


render() API. Almost all renderers mutate the request.response response object (for
example, the JSON renderer sets request.response.content_type to application/
json), but this is only necessary when the renderer is generating a response; it was a bug when it
was done as a side effect of calling pyramid.renderers.render().

• Removed the bfg2pyramid fixer script.

• The pyramid.events.NewResponse event is now sent after response callbacks are executed.
It previously executed before response callbacks were executed. Rationale: it’s more useful to be
able to inspect the response after response callbacks have done their jobs instead of before.

• Removed the class named pyramid.view.static that had been deprecated since Pyramid 1.1.
Instead use pyramid.static.static_view with use_subpath=True argument.

• Removed the pyramid.view.is_response function that had been deprecated since Pyramid
1.1. Use the pyramid.request.Request.is_response method instead.

• Removed the ability to pass the following arguments to pyramid.config.Configurator.


add_route: view, view_context. view_for, view_permission, view_renderer,
and view_attr. Using these arguments had been deprecated since Pyramid 1.1. Instead of
passing view-related arguments to add_route, use a separate call to pyramid.config.
Configurator.add_view to associate a view with a route using its route_name argument.
Note that this impacts the pyramid.config.Configurator.add_static_view function
too, because it delegates to add_route.

• Removed the ability to influence and query a pyramid.request.Request object as if it were a


dictionary. Previously it was possible to use methods like __getitem__, get, items, and other
dictlike methods to access values in the WSGI environment. This behavior had been deprecated
since Pyramid 1.1. Use methods of request.environ (a real dictionary) instead.

• Removed ancient backwards compatibily hack in pyramid.traversal.


DefaultRootFactory which populated the __dict__ of the factory with the matchdict
values for compatibility with BFG 0.9.

• The renderer_globals_factory argument to the pyramid.config.Configurator`


constructor and its ``setup_registry method has been removed. The
set_renderer_globals_factory method of pyramid.config.Configurator
has also been removed. The (internal) pyramid.interfaces.IRendererGlobals inter-
face was also removed. These arguments, methods and interfaces had been deprecated since 1.1.
Use a BeforeRender event subscriber as documented in the ”Hooks” chapter of the Pyramid
narrative documentation instead of providing renderer globals values to the configurator.

1020 Contents
The Pyramid Web Framework, Version 1.9.4

Deprecations

• The pyramid.config.Configurator.set_request_property method now issues a


deprecation warning when used. It had been docs-deprecated in 1.4 but did not issue a deprecation
warning when used.

1.5a1 (2013-08-30)

Features

• A new http exception subclass named pyramid.httpexceptions.HTTPSuccessful was


added. You can use this class as the context of an exception view to catch all 200-series ”ex-
ceptions” (e.g. ”raise HTTPOk”). This also allows you to catch only the HTTPOk exception itself;
previously this was impossible because a number of other exceptions (such as HTTPNoContent)
inherited from HTTPOk, but now they do not.

• You can now generate ”hybrid” urldispatch/traversal URLs more easily by using the new
route_name, route_kw and route_remainder_name arguments to request.
resource_url and request.resource_path. See the new section of the ”Combining
Traversal and URL Dispatch” documentation chapter entitled ”Hybrid URL Generation”.

• It is now possible to escape double braces in Pyramid scaffolds (unescaped, these represent replace-
ment values). You can use \{\{a\}\} to represent a ”bare” {{a}}. See https://github.com/
Pylons/pyramid/pull/862

• Add localizer and locale_name properties (reified) to the request. See https://github.com/
Pylons/pyramid/issues/508. Note that the pyramid.i18n.get_localizer and pyramid.
i18n.get_locale_name functions now simply look up these properties on the request.

• Add pdistreport script, which prints the Python version in use, the Pyramid version in use, and
the version number and location of all Python distributions currently installed.

• Add the ability to invert the result of any view, route, or subscriber predicate using the not_ class.
For example:

from pyramid.config import not_

@view_config(route_name='myroute', request_method=not_('POST'))
def myview(request): ...

0.6. Change History 1021


The Pyramid Web Framework, Version 1.9.4

The above example will ensure that the view is called if the request method is not POST (at least if
no other view is more specific).

The pyramid.config.not_ class can be used against any value that is a predicate value passed
in any of these contexts:

– pyramid.config.Configurator.add_view

– pyramid.config.Configurator.add_route

– pyramid.config.Configurator.add_subscriber

– pyramid.view.view_config

– pyramid.events.subscriber

• scripts/prequest.py: add support for submitting PUT and PATCH requests. See https:
//github.com/Pylons/pyramid/pull/1033. add support for submitting OPTIONS and PROPFIND re-
quests, and allow users to specify basic authentication credentials in the request via a --login
argument to the script. See https://github.com/Pylons/pyramid/pull/1039.

• ACLAuthorizationPolicy supports __acl__ as a callable. This removes the ambiguity


between the potential AttributeError that would be raised on the context when the property
was not defined and the AttributeError that could be raised from any user-defined code within
a dynamic property. It is recommended to define a dynamic ACL as a callable to avoid this ambiguity.
See https://github.com/Pylons/pyramid/issues/735.

• Allow a protocol-relative URL (e.g. //example.com/images) to be passed to pyramid.


config.Configurator.add_static_view. This allows externally-hosted static URLs to
be generated based on the current protocol.

• The AuthTktAuthenticationPolicy has two new options to configure its domain usage:

– parent_domain: if set the authentication cookie is set on the parent domain. This is useful
if you have multiple sites sharing the same domain.

– domain: if provided the cookie is always set for this domain, bypassing all usual logic.

See https://github.com/Pylons/pyramid/pull/1028, https://github.com/Pylons/pyramid/pull/1072


and https://github.com/Pylons/pyramid/pull/1078.

1022 Contents
The Pyramid Web Framework, Version 1.9.4

• The AuthTktAuthenticationPolicy now supports IPv6 addresses when using the


include_ip=True option. This is possibly incompatible with alternative auth_tkt imple-
mentations, as the specification does not define how to properly handle IPv6. See https://github.
com/Pylons/pyramid/issues/831.

• Make it possible to use variable arguments via pyramid.paster.get_appsettings. This


also allowed the generated initialize_db script from the alchemy scaffold to grow sup-
port for options in the form a=1 b=2 so you can fill in values in a parameterized .ini file,
e.g. initialize_myapp_db etc/development.ini a=1 b=2. See https://github.
com/Pylons/pyramid/pull/911

• The request.session.check_csrf_token() method and the check_csrf view pred-


icate now take into account the value of the HTTP header named X-CSRF-Token (as well as the
csrf_token form parameter, which they always did). The header is tried when the form param-
eter does not exist.

• View lookup will now search for valid views based on the inheritance hierarchy of the context. It
tries to find views based on the most specific context first, and upon predicate failure, will move
up the inheritance chain to test views found by the super-type of the context. In the past, only the
most specific type containing views would be checked and if no matching view could be found then
a PredicateMismatch would be raised. Now predicate mismatches don’t hide valid views registered
on super-types. Here’s an example that now works:

class IResource(Interface):

...

@view_config(context=IResource)
def get(context, request):

...

@view_config(context=IResource, request_method='POST')
def post(context, request):

...

@view_config(context=IResource, request_method='DELETE')
def delete(context, request):

...

@implementer(IResource)
(continues on next page)

0.6. Change History 1023


The Pyramid Web Framework, Version 1.9.4

(continued from previous page)


class MyResource:

...

@view_config(context=MyResource, request_method='POST')
def override_post(context, request):

...

Previously the override_post view registration would hide the get and delete views in the context of
MyResource – leading to a predicate mismatch error when trying to use GET or DELETE meth-
ods. Now the views are found and no predicate mismatch is raised. See https://github.com/Pylons/
pyramid/pull/786 and https://github.com/Pylons/pyramid/pull/1004 and https://github.com/Pylons/
pyramid/pull/1046

• The pserve command now takes a -v (or --verbose) flag and a -q (or --quiet) flag. Output
from running pserve can be controlled using these flags. -v can be specified multiple times to
increase verbosity. -q sets verbosity to 0 unconditionally. The default verbosity level is 1.

• The alchemy scaffold tests now provide better coverage. See https://github.com/Pylons/pyramid/
pull/1029

• The pyramid.config.Configurator.add_route method now supports being called with


an external URL as pattern. See https://github.com/Pylons/pyramid/issues/611 and the documenta-
tion section in the ”URL Dispatch” chapter entitled ”External Routes” for more information.

Bug Fixes

• It was not possible to use pyramid.httpexceptions.HTTPException as the context of


an exception view as very general catchall for http-related exceptions when you wanted that exception
view to override the default exception view. See https://github.com/Pylons/pyramid/issues/985

• When the pyramid.reload_templates setting was true, and a Chameleon template was
reloaded, and the renderer specification named a macro (e.g. foo#macroname.pt), renderings
of the template after the template was reloaded due to a file change would produce the entire template
body instead of just a rendering of the macro. See https://github.com/Pylons/pyramid/issues/1013.

• Fix an obscure problem when combining a virtual root with a route with a *traverse in its pat-
tern. Now the traversal path generated in such a configuration will be correct, instead of an element
missing a leading slash.

1024 Contents
The Pyramid Web Framework, Version 1.9.4

• Fixed a Mako renderer bug returning a tuple with a previous defname value in some circumstances.
See https://github.com/Pylons/pyramid/issues/1037 for more information.

• Make the pyramid.config.assets.PackageOverrides object implement the API for


__loader__ objects specified in PEP 302. Proxies to the __loader__ set by the importer,
if present; otherwise, raises NotImplementedError. This makes Pyramid static view over-
rides work properly under Python 3.3 (previously they would not). See https://github.com/Pylons/
pyramid/pull/1015 for more information.

• mako_templating: added defensive workaround for non-importability of mako due to upstream


markupsafe dropping Python 3.2 support. Mako templating will no longer work under the com-
bination of MarkupSafe 0.17 and Python 3.2 (although the combination of MarkupSafe 0.17 and
Python 3.3 or any supported Python 2 version will work OK).

• Spaces and dots may now be in mako renderer template paths. This was broken when support for
the new makodef syntax was added in 1.4a1. See https://github.com/Pylons/pyramid/issues/950

• pyramid.debug_authorization=true will now correctly print out Allowed for views


registered with NO_PERMISSION_REQUIRED instead of invoking the permits method of the
authorization policy. See https://github.com/Pylons/pyramid/issues/954

• Pyramid failed to install on some systems due to being packaged with some test files containing
higher order characters in their names. These files have now been removed. See https://github.com/
Pylons/pyramid/issues/981

• pyramid.testing.DummyResource didn’t define __bool__, so code under Python 3


would use __len__ to find truthiness; this usually caused an instance of DummyResource to be
”falsy” instead of ”truthy”. See https://github.com/Pylons/pyramid/pull/1032

• The alchemy scaffold would break when the database was MySQL during tables creation. See
https://github.com/Pylons/pyramid/pull/1049

• The current_route_url method now attaches the query string to the URL by default. See
https://github.com/Pylons/pyramid/issues/1040

• Make pserve.cherrypy_server_runner Python 3 compatible. See https://github.com/


Pylons/pyramid/issues/718

0.6. Change History 1025


The Pyramid Web Framework, Version 1.9.4

Backwards Incompatibilities

• Modified the current_route_url method in pyramid.Request. The method previously re-


turned the URL without the query string by default, it now does attach the query string unless it
is overriden.

• The route_url and route_path APIs no longer quote / to %2F when a replacement value
contains a /. This was pointless, as WSGI servers always unquote the slash anyway, and Pyramid
never sees the quoted value.

• It is no longer possible to set a locale_name attribute of the request, nor is it possible to set a
localizer attribute of the request. These are now ”reified” properties that look up a locale name
and localizer respectively using the machinery described in the ”Internationalization” chapter of the
documentation.

• If you send an X-Vhm-Root header with a value that ends with a slash (or any number of slashes),
the trailing slash(es) will be removed before a URL is generated when you use use request.
resource_url or request.resource_path. Previously the virtual root path would not
have trailing slashes stripped, which would influence URL generation.

• The pyramid.interfaces.IResourceURL interface has now grown two new attributes:


virtual_path_tuple and physical_path_tuple. These should be the tuple form of
the resource’s path (physical and virtual).

1.4 (2012-12-18)

Docs

• Fix functional tests in the ZODB tutorial

1.4b3 (2012-12-10)

• Packaging release only, no code changes. 1.4b2 was a brownbag release due to missing directories
in the tarball.

1026 Contents
The Pyramid Web Framework, Version 1.9.4

1.4b2 (2012-12-10)

Docs

• Scaffolding is now PEP-8 compliant (at least for a brief shining moment).

• Tutorial improvements.

Backwards Incompatibilities

• Modified the _depth argument to pyramid.view.view_config to accept a value relative


to the invocation of view_config itself. Thus, when it was previously expecting a value of 1
or greater, to reflect that the caller of view_config is 1 stack frame away from venusian.
attach, this implementation detail is now hidden.

• Modified the _backframes argument to pyramid.util.action_method in a similar way


to the changes described to _depth above. This argument remains undocumented, but might be
used in the wild by some insane person.

1.4b1 (2012-11-21)

Features

• Small microspeed enhancement which anticipates that a pyramid.response.Response ob-


ject is likely to be returned from a view. Some code is shortcut if the class of the object returned by
a view is this class. A similar microoptimization was done to pyramid.request.Request.
is_response.

• Make it possible to use variable arguments on p* commands (pserve, pshell, pviews, etc)
in the form a=1 b=2 so you can fill in values in parameterized .ini file, e.g. pshell etc/
development.ini http_port=8080. See https://github.com/Pylons/pyramid/pull/714

• A somewhat advanced and obscure feature of Pyramid event handlers is their ability to handle ”multi-
interface” notifications. These notifications have traditionally presented multiple objects to the sub-
scriber callable. For instance, if an event was sent by code like this:

0.6. Change History 1027


The Pyramid Web Framework, Version 1.9.4

registry.notify(event, context)

In the past, in order to catch such an event, you were obligated to write and register an event subscriber
that mentioned both the event and the context in its argument list:

@subscriber([SomeEvent, SomeContextType])
def asubscriber(event, context):
pass

In many subscriber callables registered this way, it was common for the logic in the subscriber
callable to completely ignore the second and following arguments (e.g. context in the above
example might be ignored), because they usually existed as attributes of the event anyway. You
could usually get the same value by doing event.context or similar.

The fact that you needed to put an extra argument which you usually ignored in the subscriber
callable body was only a minor annoyance until we added ”subscriber predicates”, used to narrow
the set of circumstances under which a subscriber will be executed, in a prior 1.4 alpha release. Once
those were added, the annoyance was escalated, because subscriber predicates needed to accept the
same argument list and arity as the subscriber callables that they were configured against. So, for
example, if you had these two subscriber registrations in your code:

@subscriber([SomeEvent, SomeContextType])
def asubscriber(event, context):
pass

@subscriber(SomeOtherEvent)
def asubscriber(event):
pass

And you wanted to use a subscriber predicate:

@subscriber([SomeEvent, SomeContextType], mypredicate=True)


def asubscriber1(event, context):
pass

@subscriber(SomeOtherEvent, mypredicate=True)
def asubscriber2(event):
pass

1028 Contents
The Pyramid Web Framework, Version 1.9.4

If an existing mypredicate subscriber predicate had been written in such a way that it accepted
only one argument in its __call__, you could not use it against a subscription which named more
than one interface in its subscriber interface list. Similarly, if you had written a subscriber predicate
that accepted two arguments, you couldn’t use it against a registration that named only a single
interface type.

For example, if you created this predicate:

class MyPredicate(object):
# portions elided...
def __call__(self, event):
return self.val == event.context.foo

It would not work against a multi-interface-registered subscription, so in the above example, when
you attempted to use it against asubscriber1, it would fail at runtime with a TypeError, claiming
something was attempting to call it with too many arguments.

To hack around this limitation, you were obligated to design the mypredicate predicate to expect
to receive in its __call__ either a single event argument (a SomeOtherEvent object) or a pair
of arguments (a SomeEvent object and a SomeContextType object), presumably by doing something
like this:

class MyPredicate(object):
# portions elided...
def __call__(self, event, context=None):
return self.val == event.context.foo

This was confusing and bad.

In order to allow people to ignore unused arguments to subscriber callables and to normalize the
relationship between event subscribers and subscriber predicates, we now allow both subscribers
and subscriber predicates to accept only a single event argument even if they’ve been subscribed
for notifications that involve multiple interfaces. Subscribers and subscriber predicates that accept
only one argument will receive the first object passed to notify; this is typically (but not always)
the event object. The other objects involved in the subscription lookup will be discarded. You can
now write an event subscriber that accepts only event even if it subscribes to multiple interfaces:

@subscriber([SomeEvent, SomeContextType])
def asubscriber(event):
# this will work!

0.6. Change History 1029


The Pyramid Web Framework, Version 1.9.4

This prevents you from needing to match the subscriber callable parameters to the subscription type
unnecessarily, especially when you don’t make use of any argument in your subscribers except for
the event object itself.

Note, however, that if the event object is not the first object in the call to notify, you’ll run into
trouble. For example, if notify is called with the context argument first:

registry.notify(context, event)

You won’t be able to take advantage of the event-only feature. It will ”work”, but the object received
by your event handler won’t be the event object, it will be the context object, which won’t be very
useful:

@subscriber([SomeContextType, SomeEvent])
def asubscriber(event):
# bzzt! you'll be getting the context here as ``event``,␣
,→and it'll

# be useless

Existing multiple-argument subscribers continue to work without issue, so you should continue use
those if your system notifies using multiple interfaces and the first interface is not the event interface.
For example:

@subscriber([SomeContextType, SomeEvent])
def asubscriber(context, event):
# this will still work!

The event-only feature makes it possible to use a subscriber predicate that accepts only a request ar-
gument within both multiple-interface subscriber registrations and single-interface subscriber regis-
trations. You needn’t make slightly different variations of predicates depending on the subscription
type arguments. Instead, just write all your subscriber predicates so they only accept event in their
__call__ and they’ll be useful across all registrations for subscriptions that use an event as their
first argument, even ones which accept more than just event.

However, the same caveat applies to predicates as to subscriber callables: if you’re subscribing to
a multi-interface event, and the first interface is not the event interface, the predicate won’t work
properly. In such a case, you’ll need to match the predicate __call__ argument ordering and
composition to the ordering of the interfaces. For example, if the registration for the subscription
uses [SomeContext, SomeEvent], you’ll need to reflect that in the ordering of the parameters
of the predicate’s __call__ method:

1030 Contents
The Pyramid Web Framework, Version 1.9.4

def __call__(self, context, event):


return event.request.path.startswith(self.val)

tl;dr: 1) When using multi-interface subscriptions, always use the event type as the first subscription
registration argument and 2) When 1 is true, use only event in your subscriber and subscriber
predicate parameter lists, no matter how many interfaces the subscriber is notified with. This com-
bination will result in the maximum amount of reusability of subscriber predicates and the least
amount of thought on your part. Drink responsibly.

Bug Fixes

• A failure when trying to locate the attribute __text__ on route and view predicates existed when
the debug_routematch setting was true or when the pviews command was used. See https:
//github.com/Pylons/pyramid/pull/727

Documentation

• Sync up tutorial source files with the files that are rendered by the scaffold that each uses.

1.4a4 (2012-11-14)

Features

• pyramid.authentication.AuthTktAuthenticationPolicy has been updated to


support newer hashing algorithms such as sha512. Existing applications should consider updating
if possible for improved security over the default md5 hashing.

• Added an effective_principals route and view predicate.

• Do not allow the userid returned from the authenticated_userid or the userid that is one of
the list of principals returned by effective_principals to be either of the strings system.
Everyone or system.Authenticated when any of the built-in authorization policies that
live in pyramid.authentication are in use. These two strings are reserved for internal usage
by Pyramid and they will not be accepted as valid userids.

0.6. Change History 1031


The Pyramid Web Framework, Version 1.9.4

• Slightly better debug logging from pyramid.authentication.


RepozeWho1AuthenticationPolicy.

• pyramid.security.view_execution_permitted used to return True if no view could


be found. It now raises a TypeError exception in that case, as it doesn’t make sense to assert that
a nonexistent view is execution-permitted. See https://github.com/Pylons/pyramid/issues/299.

• Allow a _depth argument to pyramid.view.view_config, which will permit limited com-


position reuse of the decorator by other software that wants to provide custom decorators that are
much like view_config.

• Allow an iterable of decorators to be passed to pyramid.config.Configurator.


add_view. This allows views to be wrapped by more than one decorator without requiring com-
bining the decorators yourself.

Bug Fixes

• In the past if a renderer returned None, the body of the resulting response would be set explicitly to
the empty string. Instead, now, the body is left unchanged, which allows the renderer to set a body
itself by using e.g. request.response.body = b'foo'. The body set by the renderer will
be unmolested on the way out. See https://github.com/Pylons/pyramid/issues/709

• In uncommon cases, the pyramid_excview_tween_factory might have inadvertently raised


a KeyError looking for request_iface as an attribute of the request. It no longer fails in this
case. See https://github.com/Pylons/pyramid/issues/700

• Be more tolerant of potential error conditions in match_param and physical_path predicate


implementations; instead of raising an exception, return False.

• pyramid.view.render_view was not functioning properly under Python 3.x due to a


byte/unicode discrepancy. See https://github.com/Pylons/pyramid/issues/721

Deprecations

• pyramid.authentication.AuthTktAuthenticationPolicy will emit a warning if


an application is using the policy without explicitly passing a hashalg argument. This is because
the default is ”md5” which is considered theoretically subject to collision attacks. If you really want
”md5” then you must specify it explicitly to get rid of the warning.

1032 Contents
The Pyramid Web Framework, Version 1.9.4

Documentation

• All of the tutorials that use pyramid.authentication.


AuthTktAuthenticationPolicy now explicitly pass sha512 as a hashalg argument.

Internals

• Move TopologicalSorter from pyramid.config.util to pyramid.util, move


CyclicDependencyError from pyramid.config.util to pyramid.exceptions,
rename Singleton to Sentinel and move from pyramid.config.util to pyramid.
util; this is in an effort to move that stuff that may be an API one day out of pyramid.config.
util, because that package should never be imported from non-Pyramid code. TopologicalSorter
is still not an API, but may become one.

• Get rid of shady monkeypatching of pyramid.request.Request and pyramid.


response.Response done within the __init__.py of Pyramid. Webob no longer relies
on this being done. Instead, the ResponseClass attribute of the Pyramid Request class is assigned
to the Pyramid response class; that’s enough to satisfy WebOb and behave as it did before with the
monkeypatching.

1.4a3 (2012-10-26)

Bug Fixes

• The match_param predicate’s text method was fixed to sort its values. Part of https://github.com/
Pylons/pyramid/pull/705

• 1.4a pyramid.scripting.prepare behaved differently than 1.3 series function of same


name. In particular, if passed a request, it would not set the registry attribute of the request
like 1.3 did. A symptom would be that passing a request to pyramid.paster.bootstrap
(which uses the function) that did not have a registry attribute could assume that the registry
would be attached to the request by Pyramid. This assumption could be made in 1.3, but not in 1.4.
The assumption can now be made in 1.4 too (a registry is attached to a request passed to bootstrap
or prepare).

• When registering a view configuration that named a Chameleon ZPT renderer with a macro name in
it (e.g. renderer='some/template#somemacro.pt) as well as a view configuration with-
out a macro name in it that pointed to the same template (e.g. renderer='some/template.
pt'), internal caching could confuse the two, and your code might have rendered one instead of the
other.

0.6. Change History 1033


The Pyramid Web Framework, Version 1.9.4

Features

• Allow multiple values to be specified to the request_param view/route predicate as a sequence.


Previously only a single string value was allowed. See https://github.com/Pylons/pyramid/pull/705

• Comments with references to documentation sections placed in scaffold .ini files.

• Added an HTTP Basic authentication policy at pyramid.authentication.


BasicAuthAuthenticationPolicy.

• The Configurator testing_securitypolicy method now returns the policy object it creates.

• The Configurator testing_securitypolicy method accepts two new arguments:


remember_result and forget_result. If supplied, these values influence the result
of the policy’s remember and forget methods, respectively.

• The DummySecurityPolicy created by testing_securitypolicy now sets a forgotten


value on the policy (the value True) when its forget method is called.

• The DummySecurityPolicy created by testing_securitypolicy now sets a remembered


value on the policy, which is the value of the principal argument it’s called with when its
remember method is called.

• New physical_path view predicate. If specified, this value should be a string or a tuple
representing the physical traversal path of the context found via traversal for this predicate to
match as true. For example: physical_path='/' or physical_path='/a/b/c' or
physical_path=('', 'a', 'b', 'c'). This is not a path prefix match or a regex, it’s
a whole-path match. It’s useful when you want to always potentially show a view when some ob-
ject is traversed to, but you can’t be sure about what kind of object it will be, so you can’t use the
context predicate. The individual path elements inbetween slash characters or in tuple elements
should be the Unicode representation of the name of the resource and should not be encoded in any
way.

1.4a2 (2012-09-27)

Bug Fixes

• When trying to determine Mako defnames and Chameleon macro names in asset specifications, take
into account that the filename may have a hyphen in it. See https://github.com/Pylons/pyramid/pull/
692

1034 Contents
The Pyramid Web Framework, Version 1.9.4

Features

• A new pyramid.session.check_csrf_token convenience function was added.


• A check_csrf view predicate was added. For example, you can now do config.
add_view(someview, check_csrf=True). When the predicate is checked, if the
csrf_token value in request.params matches the CSRF token in the request’s session, the
view will be permitted to execute. Otherwise, it will not be permitted to execute.
• Add Base.metadata.bind = engine to alchemy template, so that tables defined impera-
tively will work.

Documentation

• update wiki2 SQLA tutorial with the changes required after inserting Base.metadata.bind =
engine into the alchemy scaffold.

1.4a1 (2012-09-16)

Bug Fixes

• Forward port from 1.3 branch: When no authentication policy was configured, a call to pyramid.
security.effective_principals would unconditionally return the empty list. This was
incorrect, it should have unconditionally returned [Everyone], and now does.
• Explicit url dispatch regexes can now contain colons. https://github.com/Pylons/pyramid/issues/629
• On at least one 64-bit Ubuntu system under Python 3.2, using the view_config decorator caused
a RuntimeError: dictionary changed size during iteration exception. It no
longer does. See https://github.com/Pylons/pyramid/issues/635 for more information.
• In Mako Templates lookup, check if the uri is already adjusted and bring it back to an asset spec. Nor-
mally occurs with inherited templates or included components. https://github.com/Pylons/pyramid/
issues/606 https://github.com/Pylons/pyramid/issues/607
• In Mako Templates lookup, check for absolute uri (using mako directories) when mixing up inheri-
tance with asset specs. https://github.com/Pylons/pyramid/issues/662
• HTTP Accept headers were not being normalized causing potentially conflicting view registrations
to go unnoticed. Two views that only differ in the case (’text/html’ vs. ’text/HTML’) will now raise
an error. https://github.com/Pylons/pyramid/pull/620
• Forward-port from 1.3 branch: when registering multiple views with an accept predicate in a Pyra-
mid application runing under Python 3, you might have received a TypeError: unorderable
types: function() < function() exception.

0.6. Change History 1035


The Pyramid Web Framework, Version 1.9.4

Features

• Python 3.3 compatibility.

• Configurator.add_directive now accepts arbitrary callables like partials or objects implementing


__call__ which dont have __name__ and __doc__ attributes. See https://github.com/Pylons/
pyramid/issues/621 and https://github.com/Pylons/pyramid/pull/647.

• Third-party custom view, route, and subscriber predicates can now be added for use by view authors
via pyramid.config.Configurator.add_view_predicate, pyramid.config.
Configurator.add_route_predicate and pyramid.config.Configurator.
add_subscriber_predicate. So, for example, doing this:

config.add_view_predicate('abc', my.package.ABCPredicate)

Might allow a view author to do this in an application that configured that predicate:

@view_config(abc=1)

Similar features exist for add_route, and add_subscriber. See ”Adding A Third Party View,
Route, or Subscriber Predicate” in the Hooks chapter for more information.

Note that changes made to support the above feature now means that only actions registered using the
same ”order” can conflict with one another. It used to be the case that actions registered at different
orders could potentially conflict, but to my knowledge nothing ever depended on this behavior (it
was a bit silly).

• Custom objects can be made easily JSON-serializable in Pyramid by defining a __json__ method
on the object’s class. This method should return values natively serializable by json.dumps (such
as ints, lists, dictionaries, strings, and so forth).

• The JSON renderer now allows for the definition of custom type adapters to convert unknown objects
to JSON serializations.

• As of this release, the request_method predicate, when used, will also imply that HEAD is
implied when you use GET. For example, using @view_config(request_method='GET')
is equivalent to using @view_config(request_method=('GET', 'HEAD')). Us-
ing @view_config(request_method=('GET', 'POST') is equivalent to using
@view_config(request_method=('GET', 'HEAD', 'POST'). This is because
HEAD is a variant of GET that omits the body, and WebOb has special support to return an empty
body when a HEAD is used.

1036 Contents
The Pyramid Web Framework, Version 1.9.4

• config.add_request_method has been introduced to support extending request objects with


arbitrary callables. This method expands on the previous config.set_request_property
by supporting methods as well as properties. This method now causes less code to be executed at
request construction time than config.set_request_property in version 1.3.

• Don’t add a ? to URLs generated by request.resource_url if the query argument is pro-


vided but empty.

• Don’t add a ? to URLs generated by request.route_url if the _query argument is provided


but empty.

• The static view machinery now raises (rather than returns) HTTPNotFound and
HTTPMovedPermanently exceptions, so these can be caught by the Not Found View
(and other exception views).

• The Mako renderer now supports a def name in an asset spec. When the def name is present in the
asset spec, the system will render the template def within the template and will return the result.
An example asset spec is package:path/to/template#defname.mako. This will render
the def named defname inside the template.mako template instead of rendering the entire
template. The old way of returning a tuple in the form ('defname', {}) from the view is
supported for backward compatibility,

• The Chameleon ZPT renderer now accepts a macro name in an asset spec. When the macro name is
present in the asset spec, the system will render the macro listed as a define-macro and return
the result instead of rendering the entire template. An example asset spec: package:path/to/
template#macroname.pt. This will render the macro defined as macroname within the
template.pt template instead of the entire templae.

• When there is a predicate mismatch exception (seen when no view matches for a given request due
to predicates not working), the exception now contains a textual description of the predicate which
didn’t match.

• An add_permission directive method was added to the Configurator. This directive registers
a free-standing permission introspectable into the Pyramid introspection system. Frameworks built
atop Pyramid can thus use the permissions introspectable category data to build a comprehensive
list of permissions supported by a running system. Before this method was added, permissions were
already registered in this introspectable category as a side effect of naming them in an add_view
call, this method just makes it possible to arrange for a permission to be put into the permissions
introspectable category without naming it along with an associated view. Here’s an example of usage
of add_permission:

config = Configurator()
config.add_permission('view')

0.6. Change History 1037


The Pyramid Web Framework, Version 1.9.4

• The UnencryptedCookieSessionFactoryConfig now accepts signed_serialize


and signed_deserialize hooks which may be used to influence how the sessions are mar-
shalled (by default this is done with HMAC+pickle).

• pyramid.testing.DummyRequest now supports methods supplied by the pyramid.


util.InstancePropertyMixin class such as set_property.

• Request properties and methods added via config.set_request_property or config.


add_request_method are now available to tweens.

• Request properties and methods added via config.set_request_property or config.


add_request_method are now available in the request object returned from pyramid.
paster.bootstrap.

• request.context of environment request during bootstrap is now the root object if a context
isn’t already set on a provided request.

• The pyramid.decorator.reify function is now an API, and was added to the API documen-
tation.

• Added the pyramid.testing.testConfig context manager, which can be used to generate


a configurator in a test, e.g. with testing.testConfig(...):.

• Users can now invoke a subrequest from within view code using a new request.
invoke_subrequest API.

Deprecations

• The pyramid.config.Configurator.set_request_property has been


documentation-deprecated. The method remains usable but the more featureful pyramid.
config.Configurator.add_request_method should be used in its place (it has all of
the same capabilities but can also extend the request object with methods).

1038 Contents
The Pyramid Web Framework, Version 1.9.4

Backwards Incompatibilities

• The Pyramid router no longer adds the values bfg.routes.route or bfg.routes.


matchdict to the request’s WSGI environment dictionary. These values were docs-deprecated
in repoze.bfg 1.0 (effectively seven minor releases ago). If your code depended on these values,
use request.matched_route and request.matchdict instead.

• It is no longer possible to pass an environ dictionary directly to pyramid.traversal.


ResourceTreeTraverser.__call__ (aka ModelGraphTraverser.__call__). In-
stead, you must pass a request object. Passing an environment instead of a request has generated a
deprecation warning since Pyramid 1.1.

• Pyramid will no longer work properly if you use the webob.request.LegacyRequest as a


request factory. Instances of the LegacyRequest class have a request.path_info which re-
turn a string. This Pyramid release assumes that request.path_info will unconditionally be
Unicode.

• The functions from pyramid.chameleon_zpt and pyramid.chameleon_text


named get_renderer, get_template, render_template, and
render_template_to_response have been removed. These have issued a depreca-
tion warning upon import since Pyramid 1.0. Use pyramid.renderers.get_renderer(),
pyramid.renderers.get_renderer().implementation(), pyramid.
renderers.render() or pyramid.renderers.render_to_response respectively
instead of these functions.

• The pyramid.configuration module was removed. It had been deprecated since Pyramid
1.0 and printed a deprecation warning upon its use. Use pyramid.config instead.

• The pyramid.paster.PyramidTemplate API was removed. It had been deprecated since


Pyramid 1.1 and issued a warning on import. If your code depended on this, adjust your code to
import pyramid.scaffolds.PyramidTemplate instead.

• The pyramid.settings.get_settings() API was removed. It had been printing a


deprecation warning since Pyramid 1.0. If your code depended on this API, use pyramid.
threadlocal.get_current_registry().settings instead or use the settings at-
tribute of the registry available from the request (request.registry.settings).

• These APIs from the pyramid.testing module were removed. They have been printing depre-
cation warnings since Pyramid 1.0:

– registerDummySecurityPolicy, use pyramid.config.Configurator.


testing_securitypolicy instead.

0.6. Change History 1039


The Pyramid Web Framework, Version 1.9.4

– registerResources (aka registerModels, use pyramid.config.


Configurator.testing_resources instead.

– registerEventListener, use pyramid.config.Configurator.


testing_add_subscriber instead.

– registerTemplateRenderer (aka registerDummyRenderer‘), use pyramid.


config.Configurator.testing_add_template instead.

– registerView, use pyramid.config.Configurator.add_view instead.

– registerUtility, use pyramid.config.Configurator.registry.


registerUtility instead.

– registerAdapter, use pyramid.config.Configurator.registry.


registerAdapter instead.

– registerSubscriber, use pyramid.config.Configurator.


add_subscriber instead.

– registerRoute, use pyramid.config.Configurator.add_route instead.

– registerSettings, use pyramid.config.Configurator.add_settings in-


stead.

• In Pyramid 1.3 and previous, the __call__ method of a Response object was invoked before
any finished callbacks were executed. As of this release, the __call__ method of a Response
object is invoked after finished callbacks are executed. This is in support of the request.
invoke_subrequest feature.

• The 200-series exception responses named HTTPCreated, HTTPAccepted,


HTTPNonAuthoritativeInformation, HTTPNoContent, HTTPResetContent,
and HTTPPartialContent in pyramid.httpexceptions no longer inherit from
HTTPOk. Instead they inherit from a new base class named HTTPSuccessful. This will have
no effect on you unless you’ve registered an exception view for HTTPOk and expect that exception
view to catch all the aforementioned exceptions.

Documentation

• Added an ”Upgrading Pyramid” chapter to the narrative documentation. It describes how to cope
with deprecations and removals of Pyramid APIs and how to show Pyramid-generated deprecation
warnings while running tests and while running a server.

• Added a ”Invoking a Subrequest” chapter to the documentation. It describes how to use the new
request.invoke_subrequest API.

1040 Contents
The Pyramid Web Framework, Version 1.9.4

Dependencies

• Pyramid now requires WebOb 1.2b3+ (the prior Pyramid release only relied on 1.2dev+). This is to
ensure that we obtain a version of WebOb that returns request.path_info as text.

1.3 (2012-03-21)

Bug Fixes

• When pyramid.wsgi.wsgiapp2 calls the downstream WSGI app, the app’s environ will
no longer have (deprecated and potentially misleading) bfg.routes.matchdict or bfg.
routes.route keys in it. A symptom of this bug would be a wsgiapp2-wrapped Pyramid
app finding the wrong view because it mistakenly detects that a route was matched when, in fact, it
was not.

• The fix for issue https://github.com/Pylons/pyramid/issues/461 (which made it possible for instance


methods to be used as view callables) introduced a backwards incompatibility when methods that
declared only a request argument were used. See https://github.com/Pylons/pyramid/issues/503

1.3b3 (2012-03-17)

Bug Fixes

• config.add_view(<aninstancemethod>) raised AttributeError involving __text__.


See https://github.com/Pylons/pyramid/issues/461

• Remove references to do-nothing pyramid.debug_templates setting in all Pyramid-provided


.ini files. This setting previously told Chameleon to render better exceptions; now Chameleon
always renders nice exceptions regardless of the value of this setting.

Scaffolds

• The alchemy scaffold now shows an informative error message in the browser if the person creating
the project forgets to run the initialization script.

• The alchemy scaffold initialization script is now called initialize_<projectname>_db


instead of populate_<projectname>.

0.6. Change History 1041


The Pyramid Web Framework, Version 1.9.4

Documentation

• Wiki tutorials improved due to collaboration at PyCon US 2012 sprints.

1.3b2 (2012-03-02)

Bug Fixes

• The method pyramid.request.Request.partial_application_url is no longer in


the API docs. It was meant to be a private method; its publication in the documentation as an API
method was a mistake, and it has been renamed to something private.

• When a static view was registered using an absolute filesystem path on Windows, the request.
static_url function did not work to generate URLs to its resources. Symptom: ”No static URL
definition matching c:\foo\bar\baz”.

• Make all tests pass on Windows XP.

• Bug in ACL authentication checking on Python 3: the permits and


principals_allowed_by_permission method of pyramid.authorization.
ACLAuthenticationPolicy could return an inappropriate True value when a permission
on an ACL was a string rather than a sequence, and then only if the ACL permission string was a
substring of the permission value passed to the function.

This bug effects no Pyramid deployment under Python 2; it is a bug that exists only in deployments
running on Python 3. It has existed since Pyramid 1.3a1.

This bug was due to the presence of an __iter__ attribute on strings under Python 3 which is not
present under strings in Python 2.

1.3b1 (2012-02-26)

Bug Fixes

• pyramid.config.Configurator.with_package didn’t work if the Configurator was an


old-style pyramid.configuration.Configurator instance.

• Pyramid authorization policies did not show up in the introspector.

1042 Contents
The Pyramid Web Framework, Version 1.9.4

Deprecations

• All references to the tmpl_context request variable were removed from the docs. Its existence in
Pyramid is confusing for people who were never Pylons users. It was added as a porting convenience
for Pylons users in Pyramid 1.0, but it never caught on because the Pyramid rendering system is a
lot different than Pylons’ was, and alternate ways exist to do what it was designed to offer in Pylons.
It will continue to exist ”forever” but it will not be recommended or mentioned in the docs.

1.3a9 (2012-02-22)

Features

• Add an introspection boolean to the Configurator constructor. If this is True, actions reg-
istered using the Configurator will be registered with the introspector. If it is False, they won’t.
The default is True. Setting it to False during action processing will prevent introspection for
any following registration statements, and setting it to True will start them up again. This addi-
tion is to service a requirement that the debug toolbar’s own views and methods not show up in the
introspector.

• New API: pyramid.config.Configurator.add_notfound_view. This is a wrapper


for pyramid.Config.configurator.add_view which provides easy append_slash sup-
port and does the right thing about permissions. It should be preferred over calling add_view
directly with context=HTTPNotFound as was previously recommended.

• New API: pyramid.view.notfound_view_config. This is a decorator construc-


tor like pyramid.view.view_config that calls pyramid.config.Configurator.
add_notfound_view when scanned. It should be preferred over using pyramid.view.
view_config with context=HTTPNotFound as was previously recommended.

• New API: pyramid.config.Configurator.add_forbidden_view. This is a wrapper


for pyramid.Config.configurator.add_view which does the right thing about permis-
sions. It should be preferred over calling add_view directly with context=HTTPForbidden
as was previously recommended.

• New API: pyramid.view.forbidden_view_config. This is a decorator construc-


tor like pyramid.view.view_config that calls pyramid.config.Configurator.
add_forbidden_view when scanned. It should be preferred over using pyramid.view.
view_config with context=HTTPForbidden as was previously recommended.

• New APIs: pyramid.response.FileResponse and pyramid.response.FileIter,


for usage in views that must serve files ”manually”.

0.6. Change History 1043


The Pyramid Web Framework, Version 1.9.4

Backwards Incompatibilities

• Remove pyramid.config.Configurator.with_context class method. It was never an


API, it is only used by pyramid_zcml and its functionality has been moved to that package’s
latest release. This means that you’ll need to use the 0.9.2 or later release of pyramid_zcml with
this release of Pyramid.

• The introspector argument to the pyramid.config.Configurator constructor API


has been removed. It has been replaced by the boolean introspection flag.

• The pyramid.registry.noop_introspector API object has been removed.

• The older deprecated set_notfound_view Configurator method is now an alias for


the new add_notfound_view Configurator method. Likewise, the older deprecated
set_forbidden_view is now an alias for the new add_forbidden_view. This has
the following impact: the context sent to views with a (context, request) call sig-
nature registered via the set_notfound_view or set_forbidden_view will now be
an exception object instead of the actual resource context found. Use request.context
to get the actual resource context. It’s also recommended to disuse set_notfound_view
in favor of add_notfound_view, and disuse set_forbidden_view in favor of
add_forbidden_view despite the aliasing.

Deprecations

• The API documentation for pyramid.view.append_slash_notfound_view and


pyramid.view.AppendSlashNotFoundViewFactory was removed. These names
still exist and are still importable, but they are no longer APIs. Use pyramid.config.
Configurator.add_notfound_view(append_slash=True) or pyramid.view.
notfound_view_config(append_slash=True) to get the same behavior.

• The set_forbidden_view and set_notfound_view methods of the Configurator were


removed from the documentation. They have been deprecated since Pyramid 1.1.

Bug Fixes

• The static file response object used by config.add_static_view opened the static file twice,
when it only needed to open it once.

• The AppendSlashNotFoundViewFactory used request.path to match routes. This was wrong because
request.path contains the script name, and this would cause it to fail in circumstances where the script
name was not empty. It should have used request.path_info, and now does.

1044 Contents
The Pyramid Web Framework, Version 1.9.4

Documentation

• Updated the ”Creating a Not Found View” section of the ”Hooks” chapter, replacing explanations of
registering a view using add_view or view_config with ones using add_notfound_view
or notfound_view_config.

• Updated the ”Creating a Not Forbidden View” section of the ”Hooks” chapter, replacing
explanations of registering a view using add_view or view_config with ones using
add_forbidden_view or forbidden_view_config.

• Updated the ”Redirecting to Slash-Appended Routes” section of the ”URL Dispatch” chapter, re-
placing explanations of registering a view using add_view or view_config with ones using
add_notfound_view or notfound_view_config

• Updated all tutorials to use pyramid.view.forbidden_view_config rather than


pyramid.view.view_config with an HTTPForbidden context.

1.3a8 (2012-02-19)

Features

• The scan method of a Configurator can be passed an ignore argument, which can be a string,
a callable, or a list consisting of strings and/or callables. This feature allows submodules, subpack-
ages, and global objects from being scanned. See http://readthedocs.org/docs/venusian/en/latest/
#ignore-scan-argument for more information about how to use the ignore argument to scan.

• Better error messages when a view callable returns a value that cannot be converted to a response
(for example, when a view callable returns a dictionary without a renderer defined, or doesn’t return
any value at all). The error message now contains information about the view callable itself as well
as the result of calling it.

• Better error message when a .pyc-only module is config.include -ed. This is not permitted due
to error reporting requirements, and a better error message is shown when it is attempted. Previously
it would fail with something like ”AttributeError: ’NoneType’ object has no attribute ’rfind’”.

• Add pyramid.config.Configurator.add_traverser API method. See the Hooks nar-


rative documentation section entitled ”Changing the Traverser” for more information. This is not a
new feature, it just provides an API for adding a traverser without needing to use the ZCA API.

0.6. Change History 1045


The Pyramid Web Framework, Version 1.9.4

• Add pyramid.config.Configurator.add_resource_url_adapter API


method. See the Hooks narrative documentation section entitled ”Changing How pyra-
mid.request.Request.resource_url Generates a URL” for more information. This is not a new
feature, it just provides an API for adding a resource url adapter without needing to use the ZCA
API.

• The system value req is now supplied to renderers as an alias for request. This means that
you can now, for example, in a template, do req.route_url(...) instead of request.
route_url(...). This is purely a change to reduce the amount of typing required to use request
methods and attributes from within templates. The value request is still available too, this is just
an alternative.

• A new interface was added: pyramid.interfaces.IResourceURL. An adapter im-


plementing its interface can be used to override resource URL generation when request.
resource_url is called. This interface replaces the now-deprecated pyramid.
interfaces.IContextURL interface.

• The dictionary passed to a resource’s __resource_url__ method (see ”Overriding Re-


source URL Generation” in the ”Resources” chapter) now contains an app_url key, represent-
ing the application URL generated during request.resource_url. It represents a poten-
tially customized URL prefix, containing potentially custom scheme, host and port information
passed by the user to request.resource_url. It should be used instead of request.
application_url where necessary.

• The request.resource_url API now accepts these arguments: app_url, scheme, host,
and port. The app_url argument can be used to replace the URL prefix wholesale during url
generation. The scheme, host, and port arguments can be used to replace the respective default
values of request.application_url partially.

• A new API named request.resource_path now exists. It works like request.


resource_url but produces a relative URL rather than an absolute one.

• The request.route_url API now accepts these arguments: _app_url, _scheme, _host,
and _port. The _app_url argument can be used to replace the URL prefix wholesale during url
generation. The _scheme, _host, and _port arguments can be used to replace the respective
default values of request.application_url partially.

Backwards Incompatibilities

• The pyramid.interfaces.IContextURL interface has been deprecated. People have been


instructed to use this to register a resource url adapter in the ”Hooks” chapter to use to influence

1046 Contents
The Pyramid Web Framework, Version 1.9.4

request.resource_url URL generation for resources found via custom traversers since Pyra-
mid 1.0.

The interface still exists and registering such an adapter still works, but this interface will be
removed from the software after a few major Pyramid releases. You should replace it with
an equivalent pyramid.interfaces.IResourceURL adapter, registered using the new
pyramid.config.Configurator.add_resource_url_adapter API. A deprecation
warning is now emitted when a pyramid.interfaces.IContextURL adapter is found when
request.resource_url is called.

Documentation

• Don’t create a session instance in SQLA Wiki tutorial, use raw DBSession instead (this is more
common in real SQLA apps).

Scaffolding

• Put pyramid.includes targets within ini files in scaffolds on separate lines in order to be able
to tell people to comment out only the pyramid_debugtoolbar line when they want to disable
the toolbar.

Dependencies

• Depend on venusian >= 1.0a3 to provide scan ignore support.

Internal

• Create a ”MakoRendererFactoryHelper” that provides customizable settings key prefixes. Allows


settings prefixes other than ”mako.” to be used to create different factories that don’t use the global
mako settings. This will be useful for the debug toolbar, which can currently be sabotaged by some-
one using custom mako configuration settings.

0.6. Change History 1047


The Pyramid Web Framework, Version 1.9.4

1.3a7 (2012-02-07)

Features

• More informative error message when a config.include cannot find an includeme. See
https://github.com/Pylons/pyramid/pull/392.

• Internal: catch unhashable discriminators early (raise an error instead of allowing them to find their
way into resolveConflicts).

• The match_param view predicate now accepts a string or a tuple. This replaces the broken behavior
of accepting a dict. See https://github.com/Pylons/pyramid/issues/425 for more information.

Bug Fixes

• The process will now restart when pserve is used with the --reload flag when the
development.ini file (or any other .ini file in use) is changed. See https://github.com/Pylons/
pyramid/issues/377 and https://github.com/Pylons/pyramid/pull/411

• The prequest script would fail when used against URLs which did not return HTML or text. See
https://github.com/Pylons/pyramid/issues/381

Backwards Incompatibilities

• The match_param view predicate no longer accepts a dict. This will have no negative affect because
the implementation was broken for dict-based arguments.

Documentation

• Add a traversal hello world example to the narrative docs.

1048 Contents
The Pyramid Web Framework, Version 1.9.4

1.3a6 (2012-01-20)

Features

• New API: pyramid.config.Configurator.set_request_property. Add lazy prop-


erty descriptors to a request without changing the request factory. This method provides conflict
detection and is the suggested way to add properties to a request.

• Responses generated by Pyramid’s static_view now use a wsgi.file_wrapper (see http:


//www.python.org/dev/peps/pep-0333/#optional-platform-specific-file-handling) when one is pro-
vided by the web server.

Bug Fixes

• Views registered with an accept could not be overridden correctly with a different view that had the
same predicate arguments. See https://github.com/Pylons/pyramid/pull/404 for more information.

• When using a dotted name for a view argument to Configurator.add_view that pointed
to a class with a view_defaults decorator, the view defaults would not be applied. See https:
//github.com/Pylons/pyramid/issues/396 .

• Static URL paths were URL-quoted twice. See https://github.com/Pylons/pyramid/issues/407 .

1.3a5 (2012-01-09)

Bug Fixes

• The pyramid.view.view_defaults decorator did not work properly when more than one
view relied on the defaults being different for configuration conflict resolution. See https://github.
com/Pylons/pyramid/issues/394.

Backwards Incompatibilities

• The path_info route and view predicates now match against request.upath_info (Uni-
code) rather than request.path_info (indeterminate value based on Python 3 vs. Python 2).
This has to be done to normalize matching on Python 2 and Python 3.

0.6. Change History 1049


The Pyramid Web Framework, Version 1.9.4

1.3a4 (2012-01-05)

Features

• New API: pyramid.request.Request.set_property. Add lazy property descriptors to


a request without changing the request factory. New properties may be reified, effectively caching
the value for the lifetime of the instance. Common use-cases for this would be to get a database
connection for the request or identify the current user.

• Use the waitress WSGI server instead of wsgiref in scaffolding.

Bug Fixes

• The documentation of pyramid.events.subscriber indicated that using it as a decorator


with no arguments like this:

@subscriber()
def somefunc(event):
pass

Would register somefunc to receive all events sent via the registry, but this was untrue. Instead,
it would receive no events at all. This has now been fixed and the code matches the documentation.
See also https://github.com/Pylons/pyramid/issues/386

• Literal portions of route patterns were not URL-quoted when route_url or route_path was
used to generate a URL or path.

• The result of route_path or route_url might have been unicode or str depending on the
input. It is now guaranteed to always be str.

• URL matching when the pattern contained non-ASCII characters in literal parts was indeterminate.
Now the pattern supplied to add_route is assumed to be either: a unicode value, or a str
value that contains only ASCII characters. If you now want to match the path info from a URL that
contains high order characters, you can pass the Unicode representation of the decoded path portion
in the pattern.

• When using a traverse= route predicate, traversal would fail with a URLDecodeError if there
were any high-order characters in the traversal pattern or in the matched dynamic segments.

• Using a dynamic segment named traverse in a route pattern like this:

1050 Contents
The Pyramid Web Framework, Version 1.9.4

config.add_route('trav_route', 'traversal/{traverse:.*}')

Would cause a UnicodeDecodeError when the route was matched and the matched portion of
the URL contained any high-order characters. See https://github.com/Pylons/pyramid/issues/385 .
• When using a *traverse stararg in a route pattern, a URL that matched that possessed a @@ in its
name (signifying a view name) would be inappropriately quoted by the traversal machinery during
traversal, resulting in the view not being found properly. See https://github.com/Pylons/pyramid/
issues/382 and https://github.com/Pylons/pyramid/issues/375 .

Backwards Incompatibilities

• String values passed to route_url or route_path that are meant to replace ”remainder”
matches will now be URL-quoted except for embedded slashes. For example:

config.add_route('remain', '/foo*remainder')
request.route_path('remain', remainder='abc / def')
# -> '/foo/abc%20/%20def'

Previously string values passed as remainder replacements were tacked on untouched, without any
URL-quoting. But this doesn’t really work logically if the value passed is Unicode (raw unicode
cannot be placed in a URL or in a path) and it is inconsistent with the rest of the URL generation
machinery if the value is a string (it won’t be quoted unless by the caller).
Some folks will have been relying on the older behavior to tack on query string elements and anchor
portions of the URL; sorry, you’ll need to change your code to use the _query and/or _anchor
arguments to route_path or route_url to do this now.
• If you pass a bytestring that contains non-ASCII characters to add_route as a pattern, it will now
fail at startup time. Use Unicode instead.

1.3a3 (2011-12-21)

Features

• Added a prequest script (along the lines of paster request). It is documented in the
”Command-Line Pyramid” chapter in the section entitled ”Invoking a Request”.
• Add undocumented __discriminator__ API to derived view callables. e.g. adapters.
lookup(...).__discriminator__(context, request). It will be used by superdy-
namic systems that require the discriminator to be used for introspection after manual view lookup.

0.6. Change History 1051


The Pyramid Web Framework, Version 1.9.4

Bug Fixes

• Normalized exit values and -h output for all p* scripts (pviews, proutes, etc).

Documentation

• Added a section named ”Making Your Script into a Console Script” in the ”Command-Line Pyra-
mid” chapter.

• Removed the ”Running Pyramid on Google App Engine” tutorial from the main docs. It survives on
in the Cookbook (http://docs.pylonsproject.org/projects/pyramid_cookbook/en/latest/deployment/
gae.html). Rationale: it provides the correct info for the Python 2.5 version of GAE only, and this
version of Pyramid does not support Python 2.5.

1.3a2 (2011-12-14)

Features

• New API: pyramid.view.view_defaults. If you use a class as a view, you can use the
new view_defaults class decorator on the class to provide defaults to the view configuration
information used by every @view_config decorator that decorates a method of that class. It also
works against view configurations involving a class made imperatively.

• Added a backwards compatibility knob to pcreate to emulate paster create handling for
the --list-templates option.

• Changed scaffolding machinery around a bit to make it easier for people who want to have exten-
sion scaffolds that can work across Pyramid 1.0.X, 1.1.X, 1.2.X and 1.3.X. See the new ”Creating
Pyramid Scaffolds” chapter in the narrative documentation for more info.

Documentation

• Added documentation to ”View Configuration” narrative documentation chapter about


view_defaults class decorator.

• Added API docs for view_defaults class decorator.

• Added an API docs chapter for pyramid.scaffolds.

• Added a narrative docs chapter named ”Creating Pyramid Scaffolds”.

1052 Contents
The Pyramid Web Framework, Version 1.9.4

Backwards Incompatibilities

• The template_renderer method of pyramid.scaffolds.PyramidScaffold was re-


named to render_template. If you were overriding it, you’re a bad person, because it wasn’t
an API before now. But we’re nice so we’re letting you know.

1.3a1 (2011-12-09)

Features

• Python 3.2 compatibility.

• New pyramid.compat module and API documentation which provides Python 2/3 straddling
support for Pyramid add-ons and development environments.

• A mako.directories setting is no longer required to use Mako templates Rationale: Mako


template renderers can be specified using an absolute asset spec. An entire application can be written
with such asset specs, requiring no ordered lookup path.

• bpython interpreter compatibility in pshell. See the ”Command-Line Pyramid” narrative docs
chapter for more information.

• Added get_appsettings API function to the pyramid.paster module. This function re-
turns the settings defined within an [app:...] section in a PasteDeploy ini file.

• Added setup_logging API function to the pyramid.paster module. This function sets up
Python logging according to the logging configuration in a PasteDeploy ini file.

• Configuration conflict reporting is reported in a more understandable way (”Line 11 in file...” vs. a
repr of a tuple of similar info).

• A configuration introspection system was added; see the narrative documentation chapter entitled
”Pyramid Configuration Introspection” for more information. New APIs: pyramid.registry.
Introspectable, pyramid.config.Configurator.introspector, pyramid.
config.Configurator.introspectable, pyramid.registry.Registry.
introspector.

• Allow extra keyword arguments to be passed to the pyramid.config.Configurator.


action method.

• New APIs: pyramid.path.AssetResolver and pyramid.path.


DottedNameResolver. The former can be used to resolve asset specifications, the latter
can be used to resolve dotted names to modules or packages.

0.6. Change History 1053


The Pyramid Web Framework, Version 1.9.4

Bug Fixes

• Make test suite pass on 32-bit systems; closes #286. closes #306. See also https://github.com/
Pylons/pyramid/issues/286

• The pyramid.view.view_config decorator did not accept a match_params predicate ar-


gument. See https://github.com/Pylons/pyramid/pull/308

• The AuthTktCookieHelper could potentially generate Unicode headers inappropriately when the
tokens argument to remember was used. See https://github.com/Pylons/pyramid/pull/314.

• The AuthTktAuthenticationPolicy did not use a timing-attack-aware string comparator. See https:
//github.com/Pylons/pyramid/pull/320 for more info.

• The DummySession in pyramid.testing now generates a new CSRF token if one doesn’t yet
exist.

• request.static_url now generates URL-quoted URLs when fed a path argument which
contains characters that are unsuitable for URLs. See https://github.com/Pylons/pyramid/issues/349
for more info.

• Prevent a scaffold rendering from being named site (conflicts with Python internal site.py).

• Support for using instances as targets of the pyramid.wsgi.wsgiapp and pryramid.wsgi.


wsgiapp2 functions. See https://github.com/Pylons/pyramid/pull/370 for more info.

Backwards Incompatibilities

• Pyramid no longer runs on Python 2.5 (which includes the most recent release of Jython and the
Python 2.5 version of GAE as of this writing).

• The paster command is no longer the documented way to create projects, start the server, or
run debugging commands. To create projects from scaffolds, paster create is replaced by
the pcreate console script. To serve up a project, paster serve is replaced by the pserve
console script. New console scripts named pshell, pviews, proutes, and ptweens do what
their paster <commandname> equivalents used to do. Rationale: the Paste and PasteScript
packages do not run under Python 3.

• The default WSGI server run as the result of pserve from newly rendered scaffolding is now the
wsgiref WSGI server instead of the paste.httpserver server. Rationale: Rationale: the
Paste and PasteScript packages do not run under Python 3.

1054 Contents
The Pyramid Web Framework, Version 1.9.4

• The pshell command (see ”paster pshell”) no longer accepts a --disable-ipython


command-line argument. Instead, it accepts a -p or --python-shell argument, which can
be any of the values python, ipython or bpython.

• Removed the pyramid.renderers.renderer_from_name function. It has been depre-


cated since Pyramid 1.0, and was never an API.

• To use ZCML with versions of Pyramid >= 1.3, you will need pyramid_zcml version >= 0.8
and zope.configuration version >= 3.8.0. The pyramid_zcml package version 0.8 is
backwards compatible all the way to Pyramid 1.0, so you won’t be warned if you have older versions
installed and upgrade Pyramid ”in-place”; it may simply break instead.

Dependencies

• Pyramid no longer depends on the zope.component package, except as a testing dependency.

• Pyramid now depends on a zope.interface>=3.8.0, WebOb>=1.2dev, repoze.lru>=0.4,


zope.deprecation>=3.5.0, translationstring>=0.4 (for Python 3 compatibility purposes). It
also, as a testing dependency, depends on WebTest>=1.3.1 for the same reason.

• Pyramid no longer depends on the Paste or PasteScript packages.

Documentation

• The SQLAlchemy Wiki tutorial has been updated. It now uses @view_config decorators and an
explicit database population script.

• Minor updates to the ZODB Wiki tutorial.

• A narrative documentation chapter named ”Extending Pyramid Configuration” was added; it de-
scribes how to add a new directive, and how use the pyramid.config.Configurator.
action method within custom directives. It also describes how to add introspectable objects.

• A narrative documentation chapter named ”Pyramid Configuration Introspection” was added. It


describes how to query the introspection system.

0.6. Change History 1055


The Pyramid Web Framework, Version 1.9.4

Scaffolds

• Rendered scaffolds have now been changed to be more relocatable (fewer mentions of the package
name within files in the package).

• The routesalchemy scaffold has been renamed alchemy, replacing the older (traversal-based)
alchemy scaffold (which has been retired).

• The starter scaffold now uses URL dispatch by default.

1.2 (2011-09-12)

Features

• Route pattern replacement marker names can now begin with an underscore. See https://github.com/
Pylons/pyramid/issues/276.

1.2b3 (2011-09-11)

Bug Fixes

• The route prefix was not taken into account when a static view was added in an ”include”. See
https://github.com/Pylons/pyramid/issues/266 .

1.2b2 (2011-09-08)

Bug Fixes

• The 1.2b1 tarball was a brownbag (particularly for Windows users) because it contained filenames
with stray quotation marks in inappropriate places. We depend on setuptools-git to produce
release tarballs, and when it was run to produce the 1.2b1 tarball, it didn’t yet cope well with files
present in git repositories with high-order characters in their filenames.

1056 Contents
The Pyramid Web Framework, Version 1.9.4

Documentation

• Minor tweaks to the ”Introduction” narrative chapter example app and wording.

1.2b1 (2011-09-08)

Bug Fixes

• Sometimes falling back from territory translations (de_DE) to language translations (de) would not
work properly when using a localizer. See https://github.com/Pylons/pyramid/issues/263

• The static file serving machinery could not serve files that started with a . (dot) character.

• Static files with high-order (super-ASCII) characters in their names could not be served by a static
view. The static file serving machinery inappropriately URL-quoted path segments in filenames
when asking for files from the filesystem.

• Within pyramid.traversal.traversal_path , canonicalize URL segments from UTF-8


to Unicode before checking whether a segment matches literally one of ., the empty string, or ..
in case there’s some sneaky way someone might tunnel those strings via UTF-8 that don’t match the
literals before decoded.

Documentation

• Added a ”What Makes Pyramid Unique” section to the Introduction narrative chapter.

1.2a6 (2011-09-06)

Bug Fixes

• AuthTktAuthenticationPolicy with a reissue_time interfered with logout. See https://github.


com/Pylons/pyramid/issues/262.

0.6. Change History 1057


The Pyramid Web Framework, Version 1.9.4

Internal

• Internalize code previously depended upon as imports from the paste.auth module (future-
proof).

• Replaced use of paste.urlparser.StaticURLParser with a derivative of Chris Rossi’s


”happy” static file serving code (futureproof).

• Fixed test suite; on some systems tests would fail due to indeterminate test run ordering and a double-
push-single-pop of a shared test variable.

Behavior Differences

• An ETag header is no longer set when serving a static file. A Last-Modified header is set instead.

• Static file serving no longer supports the wsgi.file_wrapper extension.

• Instead of returning a 403 Forbidden error when a static file is served that cannot be accessed
by the Pyramid process’ user due to file permissions, an IOError (or similar) will be raised.

Scaffolds

• All scaffolds now send the cache_max_age parameter to the add_static_view method.

1.2a5 (2011-09-04)

Bug Fixes

• The route_prefix of a configurator was not properly taken into account when registering routes
in certain circumstances. See https://github.com/Pylons/pyramid/issues/260

Dependencies

• The zope.configuration package is no longer a dependency.

1058 Contents
The Pyramid Web Framework, Version 1.9.4

1.2a4 (2011-09-02)

Features

• Support an onerror keyword argument to pyramid.config.Configurator.scan().


This onerror keyword argument is passed to venusian.Scanner.scan() to influence error
behavior when an exception is raised during scanning.

• The request_method predicate argument to pyramid.config.Configurator.


add_view and pyramid.config.Configurator.add_route is now permitted to be a
tuple of HTTP method names. Previously it was restricted to being a string representing a single
HTTP method name.

• Undeprecated pyramid.traversal.find_model, pyramid.traversal.


model_path, pyramid.traversal.model_path_tuple, and pyramid.url.
model_url, which were all deprecated in Pyramid 1.0. There’s just not much cost to keeping
them around forever as aliases to their renamed resource_* prefixed functions.

• Undeprecated pyramid.view.bfg_view, which was deprecated in Pyramid 1.0. This is a low-


cost alias to pyramid.view.view_config which we’ll just keep around forever.

Dependencies

• Pyramid now requires Venusian 1.0a1 or better to support the onerror keyword argument to
pyramid.config.Configurator.scan.

1.2a3 (2011-08-29)

Bug Fixes

• Pyramid did not properly generate static URLs using pyramid.url.static_url when passed
a caller-package relative path due to a refactoring done in 1.2a1.

• The settings object emitted a deprecation warning any time __getattr__ was called upon
it. However, there are legitimate situations in which __getattr__ is called on arbitrary objects
(e.g. hasattr). Now, the settings object only emits the warning upon successful lookup.

0.6. Change History 1059


The Pyramid Web Framework, Version 1.9.4

Internal

• Use config.with_package in view_config decorator rather than manufacturing a new renderer


helper (cleanup).

1.2a2 (2011-08-27)

Bug Fixes

• When a renderers= argument is not specified to the Configurator constructor, eagerly register
and commit the default renderer set. This permits the overriding of the default renderers, which was
broken in 1.2a1 without a commit directly after Configurator construction.

• Mako rendering exceptions had the wrong value for an error message.

• An include could not set a root factory successfully because the Configurator constructor uncondi-
tionally registered one that would be treated as if it were ”the word of the user”.

Features

• A session factory can now be passed in using the dotted name syntax.

1.2a1 (2011-08-24)

Features

• The [pshell] section in an ini configuration file now treats a setup key as a dotted name that
points to a callable that is passed the bootstrap environment. It can mutate the environment as
necessary for great justice.

• A new configuration setting named pyramid.includes is now available. It is described in the


”Environment Variables and .ini Files Settings” narrative documentation chapter.

1060 Contents
The Pyramid Web Framework, Version 1.9.4

• Added a route_prefix argument to the pyramid.config.Configurator.include


method. This argument allows you to compose URL dispatch applications together. See the section
entitled ”Using a Route Prefix to Compose Applications” in the ”URL Dispatch” narrative docu-
mentation chapter.

• Added a pyramid.security.NO_PERMISSION_REQUIRED constant for use in


permission= statements to view configuration. This constant has a value of the string
__no_permission_required__. This string value was previously referred to in documenta-
tion; now the documentation uses the constant.

• Added a decorator-based way to configure a response adapter: pyramid.response.


response_adapter. This decorator has the same use as pyramid.config.
Configurator.add_response_adapter but it’s declarative.

• The pyramid.events.BeforeRender event now has an attribute named rendering_val.


This can be used to introspect the value returned by a view in a BeforeRender subscriber.

• New configurator directive: pyramid.config.Configurator.add_tween. This directive


adds a ”tween”. A ”tween” is used to wrap the Pyramid router’s primary request handling function.
This is a feature may be used by Pyramid framework extensions, to provide, for example, view timing
support and as a convenient place to hang bookkeeping code.

Tweens are further described in the narrative docs section in the Hooks chapter, named ”Registering
Tweens”.

• New paster command paster ptweens, which prints the current ”tween” configuration for an
application. See the section entitled ”Displaying Tweens” in the Command-Line Pyramid chapter
of the narrative documentation for more info.

• The Pyramid debug logger now uses the standard logging configuration (usually set up
by Paste as part of startup). This means that output from e.g. debug_notfound,
debug_authorization, etc. will go to the normal logging channels. The logger name of the
debug logger will be the package name of the caller of the Configurator’s constructor.

• A new attribute is available on request objects: exc_info. Its value will be None until an excep-
tion is caught by the Pyramid router, after which it will be the result of sys.exc_info().

• pyramid.testing.DummyRequest now implements the add_finished_callback and


add_response_callback methods.

• New methods of the pyramid.config.Configurator class:


set_authentication_policy and set_authorization_policy. These are
meant to be consumed mostly by add-on authors.

0.6. Change History 1061


The Pyramid Web Framework, Version 1.9.4

• New Configurator method: set_root_factory.

• Pyramid no longer eagerly commits some default configuration statements at Configu-


rator construction time, which permits values passed in as constructor arguments (e.g.
authentication_policy and authorization_policy) to override the same settings ob-
tained via an ”include”.

• Better Mako rendering exceptions via pyramid.mako_templating.


MakoRenderingException

• New request methods: current_route_url, current_route_path, and static_path.

• New functions in pyramid.url: current_route_path and static_path.

• The pyramid.request.Request.static_url API (and its brethren pyramid.


request.Request.static_path, pyramid.url.static_url, and pyramid.url.
static_path) now accept an asbolute filename as a ”path” argument. This will generate a URL
to an asset as long as the filename is in a directory which was previously registered as a static
view. Previously, trying to generate a URL to an asset using an absolute file path would raise a
ValueError.

• The RemoteUserAuthenticationPolicy ``, ``AuthTktAuthenticationPolicy,


and SessionAuthenticationPolicy constructors now accept an additional keyword ar-
gument named debug. By default, this keyword argument is False. When it is True,
debug information will be sent to the Pyramid debug logger (usually on stderr) when the
authenticated_userid or effective_principals method is called on any of these
policies. The output produced can be useful when trying to diagnose authentication-related
problems.

• New view predicate: match_param. Example: a view added via config.add_view(aview,


match_param='action=edit') will be called only when the request.matchdict has
a value inside it named action with a value of edit.

Internal

• The Pyramid ”exception view” machinery is now implemented as a ”tween” (pyramid.tweens.


excview_tween_factory).

• WSGIHTTPException (HTTPFound, HTTPNotFound, etc) now has a new API named ”prepare”
which renders the body and content type when it is provided with a WSGI environ. Required for
debug toolbar.

1062 Contents
The Pyramid Web Framework, Version 1.9.4

• Once __call__ or prepare is called on a WSGIHTTPException, the body will be set, and sub-
sequent calls to __call__ will always return the same body. Delete the body attribute to rerender
the exception body.

• Previously the pyramid.events.BeforeRender event wrapped a dictionary (it addressed it


as its _system attribute). Now it is a dictionary (it inherits from dict), and it’s the value that is
passed to templates as a top-level dictionary.

• The route_url, route_path, resource_url, static_url, and


current_route_url functions in the pyramid.url package now delegate to a method on
the request they’ve been passed, instead of the other way around. The pyramid.request.Request
object now inherits from a mixin named pyramid.url.URLMethodsMixin to make this possible, and
all url/path generation logic is embedded in this mixin.

• Refactor pyramid.config into a package.

• Removed the _set_security_policies method of the Configurator.

• Moved the StaticURLInfo class from pyramid.static to pyramid.config.views.

• Move the Settings class from pyramid.settings to pyramid.config.settings.

• Move the OverrideProvider, PackageOverrides, DirectoryOverride, and


FileOverride classes from pyramid.asset to pyramid.config.assets.

Deprecations

• All Pyramid-related deployment settings (e.g. debug_all, debug_notfound) are now meant
to be prefixed with the prefix pyramid.. For example: debug_all -> pyramid.debug_all.
The old non-prefixed settings will continue to work indefinitely but supplying them may eventually
print a deprecation warning. All scaffolds and tutorials have been changed to use prefixed settings.

• The settings dictionary now raises a deprecation warning when you attempt to access its values
via __getattr__ instead of via __getitem__.

0.6. Change History 1063


The Pyramid Web Framework, Version 1.9.4

Backwards Incompatibilities

• If a string is passed as the debug_logger parameter to a Configurator, that string is considered


to be the name of a global Python logger rather than a dotted name to an instance of a logger.

• The pyramid.config.Configurator.include method now accepts only a single


callable argument (a sequence of callables used to be permitted). If you are passing more than
one callable to pyramid.config.Configurator.include, it will break. You now
must now instead make a separate call to the method for each callable. This change was introduced
to support the route_prefix feature of include.

• It may be necessary to more strictly order configuration route and view statements when using an
”autocommitting” Configurator. In the past, it was possible to add a view which named a route name
before adding a route with that name when you used an autocommitting configurator. For example:

config = Configurator(autocommit=True)
config.add_view('my.pkg.someview', route_name='foo')
config.add_route('foo', '/foo')

The above will raise an exception when the view attempts to add itself. Now you must add the route
before adding the view:

config = Configurator(autocommit=True)
config.add_route('foo', '/foo')
config.add_view('my.pkg.someview', route_name='foo')

This won’t effect ”normal” users, only people who have legacy BFG codebases that used an au-
tommitting configurator and possibly tests that use the configurator API (the configurator returned
by pyramid.testing.setUp is an autocommitting configurator). The right way to get around
this is to use a non-autocommitting configurator (the default), which does not have these directive
ordering requirements.

• The pyramid.config.Configurator.add_route directive no longer returns a route ob-


ject. This change was required to make route vs. view configuration processing work properly.

1064 Contents
The Pyramid Web Framework, Version 1.9.4

Documentation

• Narrative and API documentation which used the route_url, route_path, resource_url,
static_url, and current_route_url functions in the pyramid.url package have now
been changed to use eponymous methods of the request instead.

• Added a section entitled ”Using a Route Prefix to Compose Applications” to the ”URL Dispatch”
narrative documentation chapter.

• Added a new module to the API docs: pyramid.tweens.

• Added a ”Registering Tweens” section to the ”Hooks” narrative chapter.

• Added a ”Displaying Tweens” section to the ”Command-Line Pyramid” narrative chapter.

• Added documentation for the pyramid.tweens and pyramid.includes configuration set-


tings to the ”Environment Variables and .ini Files Settings” chapter.

• Added a Logging chapter to the narrative docs (based on the Pylons logging docs, thanks Phil).

• Added a Paste chapter to the narrative docs (moved content from the Project chapter).

• Added the pyramid.interfaces.IDict interface representing the methods of a dictionary,


for documentation purposes only (IMultiDict and IBeforeRender inherit from it).

• All tutorials now use - The route_url, route_path, resource_url, static_url, and
current_route_url methods of the request rather than the function variants imported from
pyramid.url.

• The ZODB wiki tutorial now uses the pyramid_zodbconn package rather than the repoze.
zodbconn package to provide ZODB integration.

Dependency Changes

• Pyramid now relies on PasteScript >= 1.7.4. This version contains a feature important for allowing
flexible logging configuration.

0.6. Change History 1065


The Pyramid Web Framework, Version 1.9.4

Scaffolds

• All scaffolds now use the pyramid_tm package rather than the repoze.tm2 middleware to
manage transaction management.

• The ZODB scaffold now uses the pyramid_zodbconn package rather than the repoze.
zodbconn package to provide ZODB integration.

• All scaffolds now use the pyramid_debugtoolbar package rather than the WebError pack-
age to provide interactive debugging features.

• Projects created via a scaffold no longer depend on the WebError package at all; configuration
in the production.ini file which used to require its error_catcher middleware has been
removed. Configuring error catching / email sending is now the domain of the pyramid_exclog
package (see http://docs.pylonsproject.org/projects/pyramid_exclog/en/latest/).

Bug Fixes

• Fixed an issue with the default renderer not working at certain times. See https://github.com/Pylons/
pyramid/issues/249

1.1 (2011-07-22)

Features

• Added the pyramid.renderers.null_renderer object as an API. The null renderer is an


object that can be used in advanced integration cases as input to the view configuration renderer=
argument. When the null renderer is used as a view renderer argument, Pyramid avoids converting
the view callable result into a Response object. This is useful if you want to reuse the view configu-
ration and lookup machinery outside the context of its use by the Pyramid router. This feature was
added for consumption by the pyramid_rpc package, which uses view configuration and lookup
outside the context of a router in exactly this way. pyramid_rpc has been broken under 1.1 since
1.1b1; adding it allows us to make it work again.

• Change all scaffolding templates that point to docs.pylonsproject.org to use /projects/


pyramid/current rather than /projects/pyramid/dev.

1066 Contents
The Pyramid Web Framework, Version 1.9.4

Internals

• Remove compat code that served only the purpose of providing backwards compatibility with
Python 2.4.

• Add a deprecation warning for non-API function pyramid.renderers.


renderer_from_name which has seen use in the wild.

• Add a clone method to pyramid.renderers.RendererHelper for use by the pyramid.


view.view_config decorator.

Documentation

• Fixed two typos in wiki2 (SQLA + URL Dispatch) tutorial.

• Reordered chapters in narrative section for better new user friendliness.

• Added more indexing markers to sections in documentation.

1.1b4 (2011-07-18)

Documentation

• Added a section entitled ”Writing a Script” to the ”Command-Line Pyramid” chapter.

Backwards Incompatibilities

• We added the pyramid.scripting.make_request API too hastily in 1.1b3. It has been


removed. Sorry for any inconvenience. Use the pyramid.request.Request.blank API
instead.

0.6. Change History 1067


The Pyramid Web Framework, Version 1.9.4

Features

• The paster pshell, paster pviews, and paster proutes commands each now under
the hood uses pyramid.paster.bootstrap, which makes it possible to supply an .ini file
without naming the ”right” section in the file that points at the actual Pyramid application. Instead,
you can generally just run paster {pshell|proutes|pviews} development.ini and
it will do mostly the right thing.

Bug Fixes

• Omit custom environ variables when rendering a custom exception template in pyramid.
httpexceptions.WSGIHTTPException._set_default_attrs; stringifying thse may
trigger code that should not be executed; see https://github.com/Pylons/pyramid/issues/239

1.1b3 (2011-07-15)

Features

• Fix corner case to ease semifunctional testing of views: create a new rendererinfo to clear out old
registry on a rescan. See https://github.com/Pylons/pyramid/pull/234.

• New API class: pyramid.static.static_view. This supersedes the deprecated


pyramid.view.static class. pyramid.static.static_view by default serves up
documents as the result of the request’s path_info, attribute rather than it’s subpath at-
tribute (the inverse was true of pyramid.view.static, and still is). pyramid.static.
static_view exposes a use_subpath flag for use when you want the static view to behave
like the older deprecated version.

• A new API function pyramid.paster.bootstrap has been added to make writing scripts
that bootstrap a Pyramid environment easier, e.g.:

from pyramid.paster import bootstrap


info = bootstrap('/path/to/my/development.ini')
request = info['request']
print request.route_url('myroute')

• A new API function pyramid.scripting.prepare has been added. It is a lower-level ana-


logue of pyramid.paster.boostrap that accepts a request and a registry instead of a config
file argument, and is used for the same purpose:

1068 Contents
The Pyramid Web Framework, Version 1.9.4

from pyramid.scripting import prepare


info = prepare(registry=myregistry)
request = info['request']
print request.route_url('myroute')

• A new API function pyramid.scripting.make_request has been added. The resulting


request will have a registry attribute. It is meant to be used in conjunction with pyramid.
scripting.prepare and/or pyramid.paster.bootstrap (both of which accept a re-
quest as an argument):

from pyramid.scripting import make_request


request = make_request('/')

• New API attribute pyramid.config.global_registries is an iterable object that con-


tains references to every Pyramid registry loaded into the current process via pyramid.config.
Configurator.make_app. It also has a last attribute containing the last registry loaded.
This is used by the scripting machinery, and is available for introspection.

Deprecations

• The pyramid.view.static class has been deprecated in favor of the newer pyramid.
static.static_view class. A deprecation warning is raised when it is used. You should re-
place it with a reference to pyramid.static.static_view with the use_subpath=True
argument.

Bug Fixes

• Without a mo-file loaded for the combination of domain/locale, pyramid.i18n.Localizer.


pluralize run using that domain/locale combination raised an inscrutable ”translations object
has no attr ’plural’” error. Now, instead it ”works” (it uses a germanic pluralization by default).
It’s nonsensical to try to pluralize something without translations for that locale/domain available,
but this behavior matches the behavior of pyramid.i18n.Localizer.translate so it’s at
least consistent; see https://github.com/Pylons/pyramid/issues/235.

0.6. Change History 1069


The Pyramid Web Framework, Version 1.9.4

1.1b2 (2011-07-13)

Features

• New environment setting PYRAMID_PREVENT_HTTP_CACHE and new configuration file value


prevent_http_cache. These are synomymous and allow you to prevent HTTP cache headers
from being set by Pyramid’s http_cache machinery globally in a process. see the ”Influencing
HTTP Caching” section of the ”View Configuration” narrative chapter and the detailed documen-
tation for this setting in the ”Environment Variables and Configuration Settings” narrative chapter.

Behavior Changes

• Previously, If a BeforeRender event subscriber added a value via the __setitem__ or


update methods of the event object with a key that already existed in the renderer globals dic-
tionary, a KeyError was raised. With the deprecation of the ”add_renderer_globals” feature of
the configurator, there was no way to override an existing value in the renderer globals dictionary
that already existed. Now, the event object will overwrite an older value that is already in the glob-
als dictionary when its __setitem__ or update is called (as well as the new setdefault
method), just like a plain old dictionary. As a result, for maximum interoperability with other third-
party subscribers, if you write an event subscriber meant to be used as a BeforeRender subscriber,
your subscriber code will now need to (using .get or __contains__ of the event object) ensure
no value already exists in the renderer globals dictionary before setting an overriding value.

Bug Fixes

• The Configurator.add_route method allowed two routes with the same route to be added
without an intermediate config.commit(). If you now receive a ConfigurationError at
startup time that appears to be add_route related, you’ll need to either a) ensure that all of your
route names are unique or b) call config.commit() before adding a second route with the name
of a previously added name or c) use a Configurator that works in autocommit mode.

• The pyramid_routesalchemy and pyramid_alchemy scaffolds inappropriately used


DBSession.rollback() instead of transaction.abort() in one place.

• We now clear request.response before we invoke an exception view; an exception view will
be working with a request.response that has not been touched by any code prior to the exception.

• Views associated with routes with spaces in the route name may not have been looked up correctly
when using Pyramid with zope.interface 3.6.4 and better. See https://github.com/Pylons/
pyramid/issues/232.

1070 Contents
The Pyramid Web Framework, Version 1.9.4

Documentation

• Wiki2 (SQLAlchemy + URL Dispatch) tutorial models.initialize_sql didn’t match the


pyramid_routesalchemy scaffold function of the same name; it didn’t get synchronized when
it was changed in the scaffold.

• New documentation section in View Configuration narrative chapter: ”Influencing HTTP Caching”.

1.1b1 (2011-07-10)

Features

• It is now possible to invoke paster pshell even if the paste ini file section name pointed to in
its argument is not actually a Pyramid WSGI application. The shell will work in a degraded mode,
and will warn the user. See ”The Interactive Shell” in the ”Creating a Pyramid Project” narrative
documentation section.

• paster pshell now offers more built-in global variables by default (including app and
settings). See ”The Interactive Shell” in the ”Creating a Pyramid Project” narrative documen-
tation section.

• It is now possible to add a [pshell] section to your application’s .ini configuration file, which
influences the global names available to a pshell session. See ”Extending the Shell” in the ”Creating
a Pyramid Project” narrative documentation chapter.

• The config.scan method has grown a **kw argument. kw argument represents a set of key-
word arguments to pass to the Venusian Scanner object created by Pyramid. (See the Venusian
documentation for more information about Scanner).

• New request property: json_body. This property will return the JSON-decoded variant of the
request body. If the request body is not well-formed JSON, this property will raise an exception.

• A new value http_cache can be used as a view configuration parameter.

When you supply an http_cache value to a view configuration, the Expires and
Cache-Control headers of a response generated by the associated view callable are modified.
The value for http_cache may be one of the following:

0.6. Change History 1071


The Pyramid Web Framework, Version 1.9.4

– A nonzero integer. If it’s a nonzero integer, it’s treated as a number of seconds. This num-
ber of seconds will be used to compute the Expires header and the Cache-Control:
max-age parameter of responses to requests which call this view. For example:
http_cache=3600 instructs the requesting browser to ’cache this response for an hour,
please’.

– A datetime.timedelta instance. If it’s a datetime.timedelta instance, it will be


converted into a number of seconds, and that number of seconds will be used to compute the
Expires header and the Cache-Control: max-age parameter of responses to requests
which call this view. For example: http_cache=datetime.timedelta(days=1)
instructs the requesting browser to ’cache this response for a day, please’.

– Zero (0). If the value is zero, the Cache-Control and Expires headers present in all
responses from this view will be composed such that client browser cache (and any intermediate
caches) are instructed to never cache the response.

– A two-tuple. If it’s a two tuple (e.g. http_cache=(1, {'public':True})), the first


value in the tuple may be a nonzero integer or a datetime.timedelta instance; in either
case this value will be used as the number of seconds to cache the response. The second
value in the tuple must be a dictionary. The values present in the dictionary will be used
as input to the Cache-Control response header. For example: http_cache=(3600,
{'public':True}) means ’cache for an hour, and add public to the Cache-Control
header of the response’. All keys and values supported by the webob.cachecontrol.
CacheControl interface may be added to the dictionary. Supplying {'public':True}
is equivalent to calling response.cache_control.public = True.

Providing a non-tuple value as http_cache is equivalent to calling response.


cache_expires(value) within your view’s body.

Providing a two-tuple value as http_cache is equivalent to calling response.


cache_expires(value[0], **value[1]) within your view’s body.

If you wish to avoid influencing, the Expires header, and instead wish to only influence
Cache-Control headers, pass a tuple as http_cache with the first element of None, e.g.:
(None, {'public':True}).

Bug Fixes

• Framework wrappers of the original view (such as http_cached and so on) relied on being able to
trust that the response they were receiving was an IResponse. It wasn’t always, because the response
was resolved by the router instead of early in the view wrapping process. This has been fixed.

1072 Contents
The Pyramid Web Framework, Version 1.9.4

Documentation

• Added a section in the ”Webob” chapter named ”Dealing With A JSON-Encoded Request Body”
(usage of request.json_body).

Behavior Changes

• The paster pshell, paster proutes, and paster pviews commands now take a sin-
gle argument in the form /path/to/config.ini#sectionname rather than the previous 2-
argument spelling /path/to/config.ini sectionname. #sectionname may be omit-
ted, in which case #main is assumed.

1.1a4 (2011-07-01)

Bug Fixes

• pyramid.testing.DummyRequest now raises deprecation warnings when attributes dep-


recated for pyramid.request.Request are accessed (like response_content_type).
This is for the benefit of folks running unit tests which use DummyRequest instead of a ”real” re-
quest, so they know things are deprecated without necessarily needing a functional test suite.

• The pyramid.events.subscriber directive behaved contrary to the documentation when


passed more than one interface object to its constructor. For example, when the following listener
was registered:

@subscriber(IFoo, IBar)
def expects_ifoo_events_and_ibar_events(event):
print event

The Events chapter docs claimed that the listener would be registered and listening for both IFoo
and IBar events. Instead, it registered an ”object event” subscriber which would only be called if an
IObjectEvent was emitted where the object interface was IFoo and the event interface was IBar.

The behavior now matches the documentation. If you were relying on the buggy behavior of the
1.0 subscriber directive in order to register an object event subscriber, you must now pass a
sequence to indicate you’d like to register a subscriber for an object event. e.g.:

0.6. Change History 1073


The Pyramid Web Framework, Version 1.9.4

@subscriber([IFoo, IBar])
def expects_object_event(object, event):
print object, event

Features

• Add JSONP renderer (see ”JSONP renderer” in the Renderers chapter of the documentation).

Deprecations

• Deprecated the set_renderer_globals_factory method of the Configurator and the


renderer_globals Configurator constructor parameter.

Documentation

• The Wiki and Wiki2 tutorial ”Tests” chapters each had two bugs: neither did told the user to depend
on WebTest, and 2 tests failed in each as the result of changes to Pyramid itself. These issues have
been fixed.

• Move 1.0.X CHANGES.txt entries to HISTORY.txt.

1.1a3 (2011-06-26)

Features

• Added mako.preprocessor config file parameter; allows for a Mako preprocessor to be spec-
ified as a Python callable or Python dotted name. See https://github.com/Pylons/pyramid/pull/183
for rationale.

1074 Contents
The Pyramid Web Framework, Version 1.9.4

Bug fixes

• Pyramid would raise an AttributeError in the Configurator when attempting to set a __text__
attribute on a custom predicate that was actually a classmethod. See https://github.com/Pylons/
pyramid/pull/217 .

• Accessing or setting deprecated response_* attrs on request (e.g. response_content_type)


now issues a deprecation warning at access time rather than at rendering time.

1.1a2 (2011-06-22)

Bug Fixes

• 1.1a1 broke Akhet by not providing a backwards compatibility import shim for pyramid.
paster.PyramidTemplate. Now one has been added, although a deprecation warning is emit-
ted when Akhet imports it.

• If multiple specs were provided in a single call to config.add_translation_dirs, the di-


rectories were inserted into the beginning of the directory list in the wrong order: they were inserted
in the reverse of the order they were provided in the *specs list (items later in the list were added
before ones earlier in the list). This is now fixed.

Backwards Incompatibilities

• The pyramid Router attempted to set a value into the key environ['repoze.bfg.message']
when it caught a view-related exception for backwards compatibility with applications written for
repoze.bfg during error handling. It did this by using code that looked like so:

# "why" is an exception object


try:
msg = why[0]
except:
msg = ''

environ['repoze.bfg.message'] = msg

0.6. Change History 1075


The Pyramid Web Framework, Version 1.9.4

Use of the value environ['repoze.bfg.message'] was docs-deprecated in Pyramid 1.0.


Our standing policy is to not remove features after a deprecation for two full major releases, so this
code was originally slated to be removed in Pyramid 1.2. However, computing the repoze.bfg.
message value was the source of at least one bug found in the wild (https://github.com/Pylons/
pyramid/issues/199), and there isn’t a foolproof way to both preserve backwards compatibility and
to fix the bug. Therefore, the code which sets the value has been removed in this release. Code
in exception views which relies on this value’s presence in the environment should now use the
exception attribute of the request (e.g. request.exception[0]) to retrieve the message
instead of relying on request.environ['repoze.bfg.message'].

1.1a1 (2011-06-20)

Documentation

• The term ”template” used to refer to both ”paster templates” and ”rendered templates” (templates
created by a rendering engine. i.e. Mako, Chameleon, Jinja, etc.). ”Paster templates” will now be
refered to as ”scaffolds”, whereas the name for ”rendered templates” will remain as ”templates.”
• The wiki (ZODB+Traversal) tutorial was updated slightly.
• The wiki2 (SQLA+URL Dispatch) tutorial was updated slightly.
• Make pyramid.interfaces.IAuthenticationPolicy and pyramid.
interfaces.IAuthorizationPolicy public interfaces, and refer to them within the
pyramid.authentication and pyramid.authorization API docs.
• Render the function definitions for each exposed interface in pyramid.interfaces.
• Add missing docs reference to pyramid.config.Configurator.set_view_mapper and
refer to it within Hooks chapter section named ”Using a View Mapper”.
• Added section to the ”Environment Variables and .ini File Settings” chapter in the narrative doc-
umentation section entitled ”Adding a Custom Setting”.
• Added documentation for a ”multidict” (e.g. the API of request.POST) as interface API docu-
mentation.
• Added a section to the ”URL Dispatch” narrative chapter regarding the new ”static” route feature.
• Added ”What’s New in Pyramid 1.1” to HTML rendering of documentation.
• Added API docs for pyramid.authentication.SessionAuthenticationPolicy.
• Added API docs for pyramid.httpexceptions.exception_response.
• Added ”HTTP Exceptions” section to Views narrative chapter including a description of pyramid.
httpexceptions.exception_response.

1076 Contents
The Pyramid Web Framework, Version 1.9.4

Features

• Add support for language fallbacks: when trying to translate for a specific territory (such as en_GB)
fall back to translations for the language (ie en). This brings the translation behaviour in line with
GNU gettext and fixes partially translated texts when using C extensions.

• New authentication policy: pyramid.authentication.


SessionAuthenticationPolicy, which uses a session to store credentials.

• Accessing the response attribute of a pyramid.request.Request object (e.g. request.


response within a view) now produces a new pyramid.response.Response object. This
feature is meant to be used mainly when a view configured with a renderer needs to set response
attributes: all renderers will use the Response object implied by request.response as the
response object returned to the router.

request.response can also be used by code in a view that does not use a renderer, however
the response object that is produced by request.response must be returned when a renderer
is not in play (it is not a ”global” response).

• Integers and longs passed as elements to pyramid.url.resource_url or pyramid.


request.Request.resource_url e.g. resource_url(context, request, 1,
2) (1 and 2 are the elements) will now be converted implicitly to strings in the result. Pre-
viously passing integers or longs as elements would cause a TypeError.

• pyramid_alchemy paster template now uses query.get rather than query.filter_by to


take better advantage of identity map caching.

• pyramid_alchemy paster template now has unit tests.

• Added pyramid.i18n.make_localizer API (broken out from get_localizer guts).

• An exception raised by a NewRequest event subscriber can now be caught by an exception view.

• It is now possible to get information about why Pyramid raised a Forbidden exception from within
an exception view. The ACLDenied object returned by the permits method of each stock au-
thorization policy (pyramid.interfaces.IAuthorizationPolicy.permits) is now
attached to the Forbidden exception as its result attribute. Therefore, if you’ve created a Forbid-
den exception view, you can see the ACE, ACL, permission, and principals involved in the request
as eg. context.result.permission, context.result.acl, etc within the logic of the
Forbidden exception view.

0.6. Change History 1077


The Pyramid Web Framework, Version 1.9.4

• Don’t explicitly prevent the timeout from being lower than the reissue_time when set-
ting up an AuthTktAuthenticationPolicy (previously such a configuration would raise
a ValueError, now it’s allowed, although typically nonsensical). Allowing the nonsensical con-
figuration made the code more understandable and required fewer tests.
• A new paster command named paster pviews was added. This command prints a summary of
potentially matching views for a given path. See the section entitled ”Displaying Matching Views
for a Given URL” in the ”View Configuration” chapter of the narrative documentation for more
information.
• The add_route method of the Configurator now accepts a static argument. If this argument
is True, the added route will never be considered for matching when a request is handled. Instead,
it will only be useful for URL generation via route_url and route_path. See the section
entitled ”Static Routes” in the URL Dispatch narrative chapter for more information.
• A default exception view for the context pyramid.interfaces.IExceptionResponse is
now registered by default. This means that an instance of any exception response class imported
from pyramid.httpexceptions (such as HTTPFound) can now be raised from within view
code; when raised, this exception view will render the exception to a response.
• A function named pyramid.httpexceptions.exception_response is a shortcut that
can be used to create HTTP exception response objects using an HTTP integer status code.
• The Configurator now accepts an additional keyword argument named
exceptionresponse_view. By default, this argument is populated with a default ex-
ception view function that will be used when a response is raised as an exception. When None is
passed for this value, an exception view for responses will not be registered. Passing None returns
the behavior of raising an HTTP exception to that of Pyramid 1.0 (the exception will propagate to
middleware and to the WSGI server).
• The pyramid.request.Request class now has a ResponseClass interface which points
at pyramid.response.Response.
• The pyramid.response.Response class now has a RequestClass interface which points
at pyramid.request.Request.
• It is now possible to return an arbitrary object from a Pyramid view callable even if a renderer
is not used, as long as a suitable adapter to pyramid.interfaces.IResponse is regis-
tered for the type of the returned object by using the new pyramid.config.Configurator.
add_response_adapter API. See the section in the Hooks chapter of the documentation en-
titled ”Changing How Pyramid Treats View Responses”.
• The Pyramid router will now, by default, call the __call__ method of WebOb response
objects when returning a WSGI response. This means that, among other things, the
conditional_response feature of WebOb response objects will now behave properly.
• New method named pyramid.request.Request.is_response. This method should be
used instead of the pyramid.view.is_response function, which has been deprecated.

1078 Contents
The Pyramid Web Framework, Version 1.9.4

Bug Fixes

• URL pattern markers used in URL dispatch are permitted to specify a custom regex. For example,
the pattern /{foo:\d+} means to match /12345 (foo==12345 in the match dictionary) but not
/abc. However, custom regexes in a pattern marker which used squiggly brackets did not work.
For example, /{foo:\d{4}} would fail to match /1234 and /{foo:\d{1,2}} would fail
to match /1 or /11. One level of inner squiggly brackets is now recognized so that the prior two
patterns given as examples now work. See also https://github.com/Pylons/pyramid/issues/#issue/
123.

• Don’t send port numbers along with domain information in cookies set by AuthTktCookieHelper
(see https://github.com/Pylons/pyramid/issues/131).

• pyramid.url.route_path (and the shortcut pyramid.request.Request.


route_url method) now include the WSGI SCRIPT_NAME at the front of the path if it
is not empty (see https://github.com/Pylons/pyramid/issues/135).

• pyramid.testing.DummyRequest now has a script_name attribute (the empty string).

• Don’t quote :@&+$, symbols in *elements passed to pyramid.url.route_url or


pyramid.url.resource_url (see https://github.com/Pylons/pyramid/issues#issue/141).

• Include SCRIPT_NAME in redirects issued by pyramid.view.


append_slash_notfound_view (see https://github.com/Pylons/pyramid/issues#issue/149).

• Static views registered with config.add_static_view which also included a permission


keyword argument would not work as expected, because add_static_view also registered a
route factory internally. Because a route factory was registered internally, the context checked by
the Pyramid permission machinery never had an ACL. add_static_view no longer registers a
route with a factory, so the default root factory will be used.

• config.add_static_view now passes extra keyword arguments it receives to config.


add_route (calling add_static_view is mostly logically equivalent to adding a view of the type
pyramid.static.static_view hooked up to a route with a subpath). This makes it possible
to pass e.g., factory= to add_static_view to protect a particular static view with a custom
ACL.

• testing.DummyRequest used the wrong registry (the global registry) as self.registry if


a dummy request was created before testing.setUp was executed (testing.setUp pushes a
local registry onto the threadlocal stack). Fixed by implementing registry as a property for Dum-
myRequest instead of eagerly assigning an attribute. See also https://github.com/Pylons/pyramid/
issues/165

0.6. Change History 1079


The Pyramid Web Framework, Version 1.9.4

• When visiting a URL that represented a static view which resolved to a subdirectory, the index.
html of that subdirectory would not be served properly. Instead, a redirect to /subdir would be
issued. This has been fixed, and now visiting a subdirectory that contains an index.html within
a static view returns the index.html properly. See also https://github.com/Pylons/pyramid/issues/67.

• Redirects issued by a static view did not take into account any existing SCRIPT_NAME (such as one
set by a url mapping composite). Now they do.

• The pyramid.wsgi.wsgiapp2 decorator did not take into account the SCRIPT_NAME in the
origin request.

• The pyramid.wsgi.wsgiapp2 decorator effectively only worked when it decorated a view


found via traversal; it ignored the PATH_INFO that was part of a url-dispatch-matched view.

Deprecations

• Deprecated all assignments to request.response_* attributes (for example request.


response_content_type = 'foo' is now deprecated). Assignments and mutations of
assignable request attributes that were considered by the framework for response influence are now
deprecated: response_content_type, response_headerlist, response_status,
response_charset, and response_cache_for. Instead of assigning these to the re-
quest object for later detection by the rendering machinery, users should use the appropri-
ate API of the Response object created by accessing request.response (e.g. code which
does request.response_content_type = 'abc' should be changed to request.
response.content_type = 'abc').

• Passing view-related parameters to pyramid.config.Configurator.add_route is now


deprecated. Previously, a view was permitted to be connected to a route using a set of view*
parameters passed to the add_route method of the Configurator. This was a shorthand which
replaced the need to perform a subsequent call to add_view. For example, it was valid (and often
recommended) to do:

config.add_route('home', '/', view='mypackage.views.myview',


view_renderer='some/renderer.pt')

Passing view* arguments to add_route is now deprecated in favor of connecting a view to a


predefined route via Configurator.add_view using the route’s route_name parameter. As
a result, the above example should now be spelled:

1080 Contents
The Pyramid Web Framework, Version 1.9.4

config.add_route('home', '/')
config.add_view('mypackage.views.myview', route_name='home')
renderer='some/renderer.pt')

This deprecation was done to reduce confusion observed in IRC, as well as to (eventually) re-
duce documentation burden (see also https://github.com/Pylons/pyramid/issues/164). A depre-
cation warning is now issued when any view-related parameter is passed to Configurator.
add_route.

• Passing an environ dictionary to the __call__ method of a ”traverser” (e.g. an object


that implements pyramid.interfaces.ITraverser such as an instance of pyramid.
traversal.ResourceTreeTraverser) as its request argument now causes a depreca-
tion warning to be emitted. Consumer code should pass a request object instead. The fact that
passing an environ dict is permitted has been documentation-deprecated since repoze.bfg 1.1,
and this capability will be removed entirely in a future version.

• The following (undocumented, dictionary-like) methods of the pyramid.request.Request


object have been deprecated: __contains__, __delitem__, __getitem__, __iter__,
__setitem__, get, has_key, items, iteritems, itervalues, keys, pop, popitem,
setdefault, update, and values. Usage of any of these methods will cause a deprecation
warning to be emitted. These methods were added for internal compatibility in repoze.bfg 1.1
(code that currently expects a request object expected an environ object in BFG 1.0 and before). In
a future version, these methods will be removed entirely.

• Deprecated pyramid.view.is_response function in favor of (newly-added) pyramid.


request.Request.is_response method. Determining if an object is truly a valid response
object now requires access to the registry, which is only easily available as a request attribute. The
pyramid.view.is_response function will still work until it is removed, but now may return
an incorrect answer under some (very uncommon) circumstances.

Behavior Changes

• The default Mako renderer is now configured to escape all HTML in expression tags. This is intended
to help prevent XSS attacks caused by rendering unsanitized input from users. To revert this behavior
in user’s templates, they need to filter the expression through the ’n’ filter. For example, ${ myhtml
| n }. See https://github.com/Pylons/pyramid/issues/193.

• A custom request factory is now required to return a request object that has a response attribute
(or ”reified”/lazy property) if they the request is meant to be used in a view that uses a renderer.
This response attribute should be an instance of the class pyramid.response.Response.

0.6. Change History 1081


The Pyramid Web Framework, Version 1.9.4

• The JSON and string renderer factories now assign to request.response.content_type


rather than request.response_content_type.

• Each built-in renderer factory now determines whether it should change the content type of the
response by comparing the response’s content type against the response’s default content type; if
the content type is the default content type (usually text/html), the renderer changes the content
type (to application/json or text/plain for JSON and string renderers respectively).

• The pyramid.wsgi.wsgiapp2 now uses a slightly different method of figuring out how to ”fix”
SCRIPT_NAME and PATH_INFO for the downstream application. As a result, those values may
differ slightly from the perspective of the downstream application (for example, SCRIPT_NAME
will now never possess a trailing slash).

• Previously, pyramid.request.Request inherited from webob.request.Request and


implemented __getattr__, __setattr__ and __delattr__ itself in order to overidde
”adhoc attr” WebOb behavior where attributes of the request are stored in the environ. Now,
pyramid.request.Request object inherits from (the more recent) webob.request.
BaseRequest instead of webob.request.Request, which provides the same behavior.
pyramid.request.Request no longer implements its own __getattr__, __setattr__
or __delattr__ as a result.

• pyramid.response.Response is now a subclass of webob.response.Response (in


order to directly implement the pyramid.interfaces.IResponse interface).

• The ”exception response” objects importable from pyramid.httpexceptions (e.g.


HTTPNotFound) are no longer just import aliases for classes that actually live in webob.exc.
Instead, we’ve defined our own exception classes within the module that mirror and emulate the
webob.exc exception response objects almost entirely. See the ”Design Defense” doc section
named ”Pyramid Uses its Own HTTP Exception Classes” for more information.

Backwards Incompatibilities

• Pyramid no longer supports Python 2.4. Python 2.5 or better is required to run Pyramid 1.1+.

• The Pyramid router now, by default, expects response objects returned from view callables to im-
plement the pyramid.interfaces.IResponse interface. Unlike the Pyramid 1.0 version of
this interface, objects which implement IResponse now must define a __call__ method that ac-
cepts environ and start_response, and which returns an app_iter iterable, among other
things. Previously, it was possible to return any object which had the three WebOb app_iter,
headerlist, and status attributes as a response, so this is a backwards incompatibility. It is
possible to get backwards compatibility back by registering an adapter to IResponse from the type
of object you’re now returning from view callables. See the section in the Hooks chapter of the
documentation entitled ”Changing How Pyramid Treats View Responses”.

1082 Contents
The Pyramid Web Framework, Version 1.9.4

• The pyramid.interfaces.IResponse interface is now much more extensive. Previously


it defined only app_iter, status and headerlist; now it is basically intended to directly
mirror the webob.Response API, which has many methods and attributes.

• The pyramid.httpexceptions classes named HTTPFound, HTTPMultipleChoices,


HTTPMovedPermanently, HTTPSeeOther, HTTPUseProxy, and
HTTPTemporaryRedirect now accept location as their first positional argument rather
than detail. This means that you can do, e.g. return pyramid.httpexceptions.
HTTPFound('http://foo') rather than return pyramid.httpexceptions.
HTTPFound(location='http//foo') (the latter will of course continue to work).

Dependencies

• Pyramid now depends on WebOb >= 1.0.2 as tests depend on the bugfix in that release: ”Fix handling
of WSGI environs with missing SCRIPT_NAME”. (Note that in reality, everyone should probably
be using 1.0.4 or better though, as WebOb 1.0.2 and 1.0.3 were effectively brownbag releases.)

1.0 (2011-01-30)

Documentation

• Fixed bug in ZODB Wiki tutorial (missing dependency on docutils in ”models” step within
setup.py).

• Removed API documentation for pyramid.testing APIs named


registerDummySecurityPolicy, registerResources, registerModels,
registerEventListener, registerTemplateRenderer,
registerDummyRenderer, registerView, registerUtility, registerAdapter,
registerSubscriber, registerRoute, and registerSettings.

• Moved ”Using ZODB With ZEO” and ”Using repoze.catalog Within Pyramid” tutorials out of core
documentation and into the Pyramid Tutorials site (http://docs.pylonsproject.org/projects/pyramid_
tutorials/en/latest/).

• Changed ”Cleaning up After a Request” section in the URL Dispatch chapter to use request.
add_finished_callback instead of jamming an object with a __del__ into the WSGI en-
vironment.

• Remove duplication of add_route API documentation from URL Dispatch narrative chapter.

0.6. Change History 1083


The Pyramid Web Framework, Version 1.9.4

• Remove duplication of API and narrative documentation in pyramid.view.view_config API


docs by pointing to pyramid.config.add_view documentation and narrative chapter docu-
mentation.

• Removed some API documentation duplicated in narrative portions of documentation

• Removed ”Overall Flow of Authentication” from SQLAlchemy + URL Dispatch wiki tutorial due
to print space concerns (moved to Pyramid Tutorials site).

Bug Fixes

• Deprecated-since-BFG-1.2 APIs from pyramid.testing now properly emit deprecation warn-


ings.

• Added egg:repoze.retry#retry middleware to the WSGI pipeline in ZODB templates (retry


ZODB conflict errors which occur in normal operations).

• Removed duplicate implementations of is_response. Two competing implementations existed:


one in pyramid.config and one in pyramid.view. Now the one defined in pyramid.view
is used internally by pyramid.config and continues to be advertised as an API.

1.0b3 (2011-01-28)

Bug Fixes

• Use &copy; instead of copyright symbol in paster templates / tutorial templates for the benefit of
folks who cutnpaste and save to a non-UTF8 format.

• pyramid.view.append_slash_notfound_view now preserves GET query parameters


across redirects.

Documentation

• Beef up documentation related to set_default_permission: explicitly mention that default


permissions also protect exception views.

• Paster templates and tutorials now use spaces instead of tabs in their HTML templates.

1084 Contents
The Pyramid Web Framework, Version 1.9.4

1.0b2 (2011-01-24)

Bug Fixes

• The production.ini generated by all paster templates now have an effective logging level of
WARN, which prevents e.g. SQLAlchemy statement logging and other inappropriate output.

• The production.ini of the pyramid_routesalchemy and pyramid_alchemy


paster templates did not have a sqlalchemy logger section, preventing paster serve
production.ini from working.

• The pyramid_routesalchemy and pyramid_alchemy paster templates used


the {{package}} variable in a place where it should have used the {{project}}
variable, causing applications created with uppercase letters e.g. paster create
-t pyramid_routesalchemy Dibbus to fail to start when paster serve
development.ini was used against the result. See https://github.com/Pylons/pyramid/
issues/#issue/107

• The render_view method of pyramid.renderers.RendererHelper passed an in-


correct value into the renderer for renderer_info. It now passes an instance of
RendererHelper instead of a dictionary, which is consistent with other usages. See https:
//github.com/Pylons/pyramid/issues#issue/106

• A bug existed in the pyramid.authentication.AuthTktCookieHelper which would


break any usage of an AuthTktAuthenticationPolicy when one was configured to reissue its tokens
(reissue_time < timeout / max_age). Symptom: ValueError: ('Invalid token
%r', ''). See https://github.com/Pylons/pyramid/issues#issue/108.

1.0b1 (2011-01-21)

Features

• The AuthTktAuthenticationPolicy now accepts a tokens parameter via pyramid.security.


remember. The value must be a sequence of strings. Tokens are placed into the auth_tkt ”tokens”
field and returned in the auth_tkt cookie.

• Add wild_domain argument to AuthTktAuthenticationPolicy, which defaults to True. If it is set


to False, the feature of the policy which sets a cookie with a wildcard domain will be turned off.

• Add a MANIFEST.in file to each paster template. See https://github.com/Pylons/pyramid/issues#


issue/95

0.6. Change History 1085


The Pyramid Web Framework, Version 1.9.4

Bug Fixes

• testing.setUp now adds a settings attribute to the registry (both when it’s passed a registry
without any settings and when it creates one).

• The testing.setUp function now takes a settings argument, which should be a dictionary.
Its values will subsequently be available on the returned config object as config.registry.
settings.

Documentation

• Added ”What’s New in Pyramid 1.0” chapter to HTML rendering of documentation.

• Merged caseman-master narrative editing branch, many wording fixes and extensions.

• Fix deprecated example showing chameleon_zpt API call in testing narrative chapter.

• Added ”Adding Methods to the Configurator via add_directive” section to Advanced Config-
uration narrative chapter.

• Add docs for add_finished_callback, add_response_callback, route_path,


route_url, and static_url methods to pyramid.request.Request API docs.

• Add (minimal) documentation about using I18N within Mako templates to ”Internationalization and
Localization” narrative chapter.

• Move content of ”Forms” chapter back to ”Views” chapter; I can’t think of a better place to put it.

• Slightly improved interface docs for IAuthorizationPolicy.

• Minimally explain usage of custom regular expressions in URL dispatch replacement markers within
URL Dispatch chapter.

Deprecations

• Using the pyramid.view.bfg_view alias for pyramid.view.view_config (a back-


wards compatibility shim) now issues a deprecation warning.

1086 Contents
The Pyramid Web Framework, Version 1.9.4

Backwards Incompatibilities

• Using testing.setUp now registers an ISettings utility as a side effect. Some test code which
queries for this utility after testing.setUp via queryAdapter will expect a return value of None.
This code will need to be changed.

• When a pyramid.exceptions.Forbidden error is raised, its status code now 403


Forbidden. It was previously 401 Unauthorized, for backwards compatibility purposes
with repoze.bfg. This change will cause problems for users of Pyramid with repoze.who,
which intercepts 401 Unauthorized by default, but allows 403 Forbidden to pass through.
Those deployments will need to configure repoze.who to also react to 403 Forbidden.

• The default value for the cookie_on_exception parameter to pyramid.session.


UnencyrptedCookieSessionFactory is now True. This means that when view code
causes an exception to be raised, and the session has been mutated, a cookie will be sent back
in the response. Previously its default value was False.

Paster Templates

• The pyramid_zodb, pyramid_routesalchemy and pyramid_alchemy paster templates


now use a default ”commit veto” hook when configuring the repoze.tm2 transaction manager in
development.ini. This prevents a transaction from being committed when the response status
code is within the 400 or 500 ranges. See also http://docs.repoze.org/tm2/#using-a-commit-veto.

1.0a10 (2011-01-18)

Bug Fixes

• URL dispatch now properly handles a .* or * appearing in a regex match when used inside brackets.
Resolves issue #90.

0.6. Change History 1087


The Pyramid Web Framework, Version 1.9.4

Backwards Incompatibilities

• The add_handler method of a Configurator has been removed from the Pyramid core. Han-
dlers are now a feature of the pyramid_handlers package, which can be downloaded from
PyPI. Documentation for the package should be available via http://docs.pylonsproject.org/projects/
pyramid_handlers/en/latest/, which describes how to add a configuration statement to your main
block to reobtain this method. You will also need to add an install_requires dependency
upon pyramid_handlers to your setup.py file.

• The load_zcml method of a Configurator has been removed from the Pyramid core. Load-
ing ZCML is now a feature of the pyramid_zcml package, which can be downloaded from
PyPI. Documentation for the package should be available via http://docs.pylonsproject.org/projects/
pyramid_zcml/en/latest/, which describes how to add a configuration statement to your main block
to reobtain this method. You will also need to add an install_requires dependency upon
pyramid_zcml to your setup.py file.

• The pyramid.includes subpackage has been removed. ZCML files which use in-
clude the package pyramid.includes (e.g. <include package="pyramid.
includes"/>) now must include the pyramid_zcml package instead (e.g. <include
package="pyramid_zcml"/>).

• The pyramid.view.action decorator has been removed from the Pyramid core. Handlers
are now a feature of the pyramid_handlers package. It should now be imported from
pyramid_handlers e.g. from pyramid_handlers import action.

• The handler ZCML directive has been removed. It is now a feature of the pyramid_handlers
package.

• The pylons_minimal, pylons_basic and pylons_sqla paster templates were removed.


Use pyramid_sqla (available from PyPI) as a generic replacement for Pylons-esque develop-
ment.

• The make_app function has been removed from the pyramid.router module. It continues
life within the pyramid_zcml package. This leaves the pyramid.router module without
any API functions.

• The configure_zcml setting within the deployment settings (within **settings passed to a
Pyramid main function) has ceased to have any meaning.

1088 Contents
The Pyramid Web Framework, Version 1.9.4

Features

• pyramid.testing.setUp and pyramid.testing.tearDown have been undeprecated.


They are now the canonical setup and teardown APIs for test configuration, replacing ”direct” cre-
ation of a Configurator. This is a change designed to provide a facade that will protect against any
future Configurator deprecations.
• Add charset attribute to pyramid.testing.DummyRequest (unconditionally UTF-8).
• Add add_directive method to configurator, which allows framework extenders to add methods
to the configurator (ala ZCML directives).
• When Configurator.include is passed a module as an argument, it defaults to attempting to
find and use a callable named includeme within that module. This makes it possible to use
config.include('some.module') rather than config.include('some.module.
somefunc') as long as the include function within some.module is named includeme.
• The bfg2pyramid script now converts ZCML include tags that have repoze.
bfg.includes as a package attribute to the value pyramid_zcml. For example,
<include package="repoze.bfg.includes"> will be converted to <include
package="pyramid_zcml">.

Paster Templates

• All paster templates now use pyramid.testing.setUp and pyramid.testing.


tearDown rather than creating a Configurator ”by hand” within their tests.py module, as per
decision in features above.
• The starter_zcml paster template has been moved to the pyramid_zcml package.

Documentation

• The wiki and wiki2 tutorials now use pyramid.testing.setUp and pyramid.testing.
tearDown rather than creating a Configurator ”by hand”, as per decision in features above.
• The ”Testing” narrative chapter now explains pyramid.testing.setUp and pyramid.
testing.tearDown instead of Configurator creation and Configurator.begin() and
Configurator.end().
• Document the request.override_renderer attribute within the narrative ”Renderers”
chapter in a section named ”Overriding A Renderer at Runtime”.
• The ”Declarative Configuration” narrative chapter has been removed (it was moved to the
pyramid_zcml package).
• Most references to ZCML in narrative chapters have been removed or redirected to pyramid_zcml
locations.

0.6. Change History 1089


The Pyramid Web Framework, Version 1.9.4

Deprecations

• Deprecation warnings related to import of the following API functions were added:
pyramid.traversal.find_model, pyramid.traversal.model_path, pyramid.
traversal.model_path_tuple, pyramid.url.model_url. The instructions emitted
by the deprecation warnings instruct the developer to change these method spellings to their
resource equivalents. This is a consequence of the mass concept rename of ”model” to
”resource” performed in 1.0a7.

1.0a9 (2011-01-08)

Bug Fixes

• The proutes command tried too hard to resolve the view for printing, resulting in exceptions when
an exceptional root factory was encountered. Instead of trying to resolve the view, if it cannot, it will
now just print <unknown>.

• The self argument was included in new methods of the ISession interface signature, causing
pyramid_beaker tests to fail.

• Readd pyramid.traversal.model_path_tuple as an alias for pyramid.


traversal.resource_path_tuple for backwards compatibility.

Features

• Add a new API pyramid.url.current_route_url, which computes a URL based on the


”current” route (if any) and its matchdict values.

• config.add_view now accepts a decorator keyword argument, a callable which will deco-
rate the view callable before it is added to the registry.

• If a handler class provides an __action_decorator__ attribute (usually a classmethod or stat-


icmethod), use that as the decorator for each view registration for that handler.

• The pyramid.interfaces.IAuthenticationPolicy interface now specifies an


unauthenticated_userid method. This method supports an important optimization
required by people who are using persistent storages which do not support object caching and whom
want to create a ”user object” as a request attribute.

1090 Contents
The Pyramid Web Framework, Version 1.9.4

• A new API has been added to the pyramid.security module named


unauthenticated_userid. This API function calls the unauthenticated_userid
method of the effective security policy.

• An unauthenticated_userid method has been added to the dummy authentication policy


returned by pyramid.config.Configurator.testing_securitypolicy. It returns
the same thing as that the dummy authentication policy’s authenticated_userid method.

• The class pyramid.authentication.AuthTktCookieHelper is now an API. This class


can be used by third-party authentication policy developers to help in the mechanics of authentication
cookie-setting.

• New constructor argument to Configurator: default_view_mapper. Useful to create sys-


tems that have alternate view calling conventions. A view mapper allows objects that are meant
to be used as view callables to have an arbitrary argument list and an arbitrary result. The
object passed as default_view_mapper should implement the pyramid.interfaces.
IViewMapperFactory interface.

• add a set_view_mapper API to Configurator. Has the same result as passing


default_view_mapper to the Configurator constructor.

• config.add_view now accepts a mapper keyword argument, which should either be None, a
string representing a Python dotted name, or an object which is an IViewMapperFactory. This
feature is not useful for ”civilians”, only for extension writers.

• Allow static renderer provided during view registration to be overridden at request time via a request
attribute named override_renderer, which should be the name of a previously registered ren-
derer. Useful to provide ”omnipresent” RPC using existing rendered views.

• Instances of pyramid.testing.DummyRequest now have a session object, which is


mostly a dictionary, but also implements the other session API methods for flash and CSRF.

Backwards Incompatibilities

• Since the pyramid.interfaces.IAuthenticationPolicy interface now specifies that


a policy implementation must implement an unauthenticated_userid method, all third-
party custom authentication policies now must implement this method. It, however, will only be
called when the global function named pyramid.security.unauthenticated_userid
is invoked, so if you’re not invoking that, you will not notice any issues.

• pyramid.interfaces.ISession.get_csrf_token now mandates that an implementa-


tion should return a new token if one doesn’t already exist in the session (previously it would return
None). The internal sessioning implementation has been changed.

0.6. Change History 1091


The Pyramid Web Framework, Version 1.9.4

Documentation

• The (weak) ”Converting a CMF Application to Pyramid” tutorial has been removed from the tutorials
section. It was moved to the pyramid_tutorials Github repository.
• The ”Resource Location and View Lookup” chapter has been replaced with a variant of Rob
Miller’s ”Much Ado About Traversal” (originally published at http://blog.nonsequitarian.org/2010/
much-ado-about-traversal/).
• Many minor wording tweaks and refactorings (merged Casey Duncan’s docs fork, in which he is
working on general editing).
• Added (weak) description of new view mapper feature to Hooks narrative chapter.
• Split views chapter into 2: View Callables and View Configuration.
• Reorder Renderers and Templates chapters after View Callables but before View Configuration.
• Merge Session Objects, Cross-Site Request Forgery, and Flash Messaging chapter into a single Ses-
sions chapter.
• The Wiki and Wiki2 tutorials now have much nicer CSS and graphics.

Internals

• The ”view derivation” code is now factored into a set of classes rather than a large number of stan-
dalone functions (a side effect of the view mapper refactoring).
• The pyramid.renderer.RendererHelper class has grown a render_view method,
which is used by the default view mapper (a side effect of the view mapper refactoring).
• The object passed as renderer to the ”view deriver” is now an instance of pyramid.
renderers.RendererHelper rather than a dictionary (a side effect of view mapper refac-
toring).
• The class used as the ”page template” in pyramid.chameleon_text was removed, in prefer-
ence to using a Chameleon-inbuilt version.
• A view callable wrapper registered in the registry now contains an __original_view__ at-
tribute which references the original view callable (or class).
• The (non-API) method of all internal authentication policy implementations previously named
_get_userid is now named unauthenticated_userid, promoted to an API method. If
you were overriding this method, you’ll now need to override it as unauthenticated_userid
instead.
• Remove (non-API) function of config.py named _map_view.

1092 Contents
The Pyramid Web Framework, Version 1.9.4

1.0a8 (2010-12-27)

Bug Fixes

• The name registry was not available in the paster pshell environment under IPython.

Features

• If a resource implements a __resource_url__ method, it will be called as the result of invoking


the pyramid.url.resource_url function to generate a URL, overriding the default logic.
See the new ”Generating The URL Of A Resource” section within the Resources narrative chapter.

• Added flash messaging, as described in the ”Flash Messaging” narrative documentation chapter.

• Added CSRF token generation, as described in the narrative chapter entitled ”Preventing Cross-Site
Request Forgery Attacks”.

• Prevent misunderstanding of how the view and view_permission arguments to add_route


work by raising an exception during configuration if view-related arguments exist but no view
argument is passed.

• Add paster proute command which displays a summary of the routing table. See the narra-
tive documentation section within the ”URL Dispatch” chapter entitled ”Displaying All Application
Routes”.

Paster Templates

• The pyramid_zodb Paster template no longer employs ZCML. Instead, it is based on scanning.

0.6. Change History 1093


The Pyramid Web Framework, Version 1.9.4

Documentation

• Added ”Generating The URL Of A Resource” section to the Resources narrative chapter (includes
information about overriding URL generation using __resource_url__).
• Added ”Generating the Path To a Resource” section to the Resources narrative chapter.
• Added ”Finding a Resource by Path” section to the Resources narrative chapter.
• Added ”Obtaining the Lineage of a Resource” to the Resources narrative chapter.
• Added ”Determining if a Resource is In The Lineage of Another Resource” to Resources narrative
chapter.
• Added ”Finding the Root Resource” to Resources narrative chapter.
• Added ”Finding a Resource With a Class or Interface in Lineage” to Resources narrative chapter.
• Added a ”Flash Messaging” narrative documentation chapter.
• Added a narrative chapter entitled ”Preventing Cross-Site Request Forgery Attacks”.
• Changed the ”ZODB + Traversal Wiki Tutorial” based on changes to pyramid_zodb Paster tem-
plate.
• Added ”Advanced Configuration” narrative chapter which documents how to deal with configuration
conflicts, two-phase configuration, include and commit.
• Fix API documentation rendering for pyramid.view.static
• Add ”Pyramid Provides More Than One Way to Do It” to Design Defense documentation.
• Changed ”Static Assets” narrative chapter: clarify that name represents a prefix unless it’s a URL,
added an example of a root-relative static view fallback for URL dispatch, added an example of
creating a simple view that returns the body of a file.
• Move ZCML usage in Hooks chapter to Declarative Configuration chapter.
• Merge ”Static Assets” chapter into the ”Assets” chapter.
• Added narrative documentation section within the ”URL Dispatch” chapter entitled ”Displaying All
Application Routes” (for paster proutes command).

1.0a7 (2010-12-20)

Terminology Changes

• The Pyramid concept previously known as ”model” is now known as ”resource”. As a result:
– The following API changes have been made:

1094 Contents
The Pyramid Web Framework, Version 1.9.4

pyramid.url.model_url ->
pyramid.url.resource_url

pyramid.traversal.find_model ->
pyramid.url.find_resource

pyramid.traversal.model_path ->
pyramid.traversal.resource_path

pyramid.traversal.model_path_tuple ->
pyramid.traversal.resource_path_tuple

pyramid.traversal.ModelGraphTraverser ->
pyramid.traversal.ResourceTreeTraverser

pyramid.config.Configurator.testing_models ->
pyramid.config.Configurator.testing_
,→resources

pyramid.testing.registerModels ->
pyramid.testing.registerResources

pyramid.testing.DummyModel ->
pyramid.testing.DummyResource

– All documentation which previously referred to ”model” now refers to ”resource”.

– The starter and starter_zcml paster templates now have a resources.py module
instead of a models.py module.

– Positional argument names of various APIs have been changed from model to resource.

Backwards compatibility shims have been left in place in all cases. They will continue to work
”forever”.

• The Pyramid concept previously known as ”resource” is now known as ”asset”. As a result:

– The (non-API) module previously known as pyramid.resource is now known as


pyramid.asset.

– All docs that previously referred to ”resource specification” now refer to ”asset specification”.

– The following API changes were made:

0.6. Change History 1095


The Pyramid Web Framework, Version 1.9.4

pyramid.config.Configurator.absolute_resource_spec ->
pyramid.config.Configurator.absolute_
,→asset_spec

pyramid.config.Configurator.override_resource ->
pyramid.config.Configurator.override_asset

– The ZCML directive previously known as resource is now known as asset.

– The setting previously known as BFG_RELOAD_RESOURCES (envvar)


or reload_resources (config file) is now known, respectively, as
PYRAMID_RELOAD_ASSETS and reload_assets.

Backwards compatibility shims have been left in place in all cases. They will continue to work
”forever”.

Bug Fixes

• Make it possible to succesfully run all tests via nosetests command directly (rather than indi-
rectly via python setup.py nosetests).

• When a configuration conflict is encountered during scanning, the conflict exception now shows the
decorator information that caused the conflict.

Features

• Added debug_routematch configuration setting that logs matched routes (including the match-
dict and predicates).

• The name registry is now available in a pshell environment by default. It is the application
registry object.

Environment

• All environment variables which used to be prefixed with BFG_ are now prefixed with PYRAMID_
(e.g. BFG_DEBUG_NOTFOUND is now PYRAMID_DEBUG_NOTFOUND)

1096 Contents
The Pyramid Web Framework, Version 1.9.4

Documentation

• Added ”Debugging Route Matching” section to the urldispatch narrative documentation chapter.

• Added reference to PYRAMID_DEBUG_ROUTEMATCH envvar and debug_routematch config


file setting to the Environment narrative docs chapter.

• Changed ”Project” chapter slightly to expand on use of paster pshell.

• Direct Jython users to Mako rather than Jinja2 in ”Install” narrative chapter.

• Many changes to support terminological renaming of ”model” to ”resource” and ”resource” to ”as-
set”.

• Added an example of WebTest functional testing to the testing narrative chapter.

• Rearranged chapter ordering by popular demand (URL dispatch first, then traversal). Put hybrid
chapter after views chapter.

• Split off ”Renderers” as its own chapter from ”Views” chapter in narrative documentation.

Paster Templates

• Added debug_routematch = false to all paster templates.

Dependencies

• Depend on Venusian >= 0.5 (for scanning conflict exception decoration).

1.0a6 (2010-12-15)

Bug Fixes

• 1.0a5 introduced a bug when pyramid.config.Configurator.scan was used


without a package argument (e.g. config.scan() as opposed to config.
scan('packagename'). The symptoms were: lots of deprecation warnings printed to
the console about imports of deprecated Pyramid functions and classes and non-detection of view
callables decorated with view_config decorators. This has been fixed.

• Tests now pass on Windows (no bugs found, but a few tests in the test suite assumed UNIX path
segments in filenames).

0.6. Change History 1097


The Pyramid Web Framework, Version 1.9.4

Documentation

• If you followed it to-the-letter, the ZODB+Traversal Wiki tutorial would instruct you to run a test
which would fail because the view callable generated by the pyramid_zodb tutorial used a one-
arg view callable, but the test in the sample code used a two-arg call.
• Updated ZODB+Traversal tutorial setup.py of all steps to match what’s generated by
pyramid_zodb.
• Fix reference to repoze.bfg.traversalwrapper in ”Models” chapter (point at
pyramid_traversalwrapper instead).

1.0a5 (2010-12-14)

Features

• Add a handler ZCML directive. This directive does the same thing as pyramid.
configuration.add_handler.
• A new module named pyramid.config was added. It subsumes the duties of the older
pyramid.configuration module.
• The new pyramid.config.Configurator` class has API methods that the
older ``pyramid.configuration.Configurator class did not: with_context (a
classmethod), include, action, and commit. These methods exist for imperative application
extensibility purposes.
• The pyramid.testing.setUp function now accepts an autocommit keyword argument,
which defaults to True. If it is passed False, the Config object returned by setUp will be a
non-autocommiting Config object.
• Add logging configuration to all paster templates.
• pyramid_alchemy, pyramid_routesalchemy, and pylons_sqla paster templates now
use idiomatic SQLAlchemy configuration in their respective .ini files and Python code.
• pyramid.testing.DummyRequest now has a class variable, query_string, which de-
faults to the empty string.
• Add support for json on GAE by catching NotImplementedError and importing simplejson from
django.utils.
• The Mako renderer now accepts a resource specification for mako.module_directory.
• New boolean Mako settings variable mako.strict_undefined. See Mako Context Variables
for its meaning.

1098 Contents
The Pyramid Web Framework, Version 1.9.4

Dependencies

• Depend on Mako 0.3.6+ (we now require the strict_undefined feature).

Bug Fixes

• When creating a Configurator from within a paster pshell session, you were required to
pass a package argument although package is not actually required. If you didn’t pass
package, you would receive an error something like KeyError: '__name__' emanating
from the pyramid.path.caller_module function. This has now been fixed.

• The pyramid_routesalchemy paster template’s unit tests failed (AssertionError:


'SomeProject' != 'someproject'). This is fixed.

• Make default renderer work (renderer factory registered with no name, which is active for every view
unless the view names a specific renderer).

• The Mako renderer did not properly turn the mako.imports, mako.default_filters, and
mako.imports settings into lists.

• The Mako renderer did not properly convert the mako.error_handler setting from a dotted
name to a callable.

Documentation

• Merged many wording, readability, and correctness changes to narrative documentation chapters
from https://github.com/caseman/pyramid (up to and including ”Models” narrative chapter).

• ”Sample Applications” section of docs changed to note existence of Cluegun, Shootout and Virginia
sample applications, ported from their repoze.bfg origin packages.

• SQLAlchemy+URLDispatch tutorial updated to integrate changes to


pyramid_routesalchemy template.

• Add pyramid.interfaces.ITemplateRenderer interface to Interfaces API chapter (has


implementation() method, required to be used when getting at Chameleon macros).

• Add a ”Modifying Package Structure” section to the project narrative documentation chapter (explain
turning a module into a package).

• Documentation was added for the new handler ZCML directive in the ZCML section.

0.6. Change History 1099


The Pyramid Web Framework, Version 1.9.4

Deprecations

• pyramid.configuration.Configurator is now deprecated. Use pyramid.config.


Configurator, passing its constructor autocommit=True instead. The pyramid.
configuration.Configurator alias will live for a long time, as every application uses it,
but its import now issues a deprecation warning. The pyramid.config.Configurator class
has the same API as pyramid.configuration.Configurator class, which it means to re-
place, except by default it is a non-autocommitting configurator. The now-deprecated pyramid.
configuration.Configurator will autocommit every time a configuration method is
called.

The pyramid.configuration module remains, but it is deprecated. Use pyramid.config


instead.

1.0a4 (2010-11-21)

Features

• URL Dispatch now allows for replacement markers to be located anywhere in the pattern, instead of
immediately following a /.

• URL Dispatch now uses the form {marker} to denote a replace marker in the route pattern instead
of :marker. The old colon-style marker syntax is still accepted for backwards compatibility. The
new format allows a regular expression for that marker location to be used instead of the default
[^/]+, for example {marker:\d+} is now valid to require the marker to be digits.

• Add a pyramid.url.route_path API, allowing folks to generate relative URLs. Calling


route_path is the same as calling pyramid.url.route_url with the argument _app_url
equal to the empty string.

• Add a pyramid.request.Request.route_path API. This is a convenience method of the


request which calls pyramid.url.route_url.

• Make test suite pass on Jython (requires PasteScript trunk, presumably to be 1.7.4).

• Make test suite pass on PyPy (Chameleon doesn’t work).

• Surrounding application configuration with config.begin() and config.end() is no longer


necessary. All paster templates have been changed to no longer call these functions.

• Fix configurator to not convert ImportError to ConfigurationError if the import that


failed was unrelated to the import requested via a dotted name when resolving dotted names (such
as view dotted names).

1100 Contents
The Pyramid Web Framework, Version 1.9.4

Documentation

• SQLAlchemy+URLDispatch and ZODB+Traversal tutorials have been updated to not call


config.begin() or config.end().

Bug Fixes

• Add deprecation warnings to import of pyramid.chameleon_text and pyramid.


chameleon_zpt of get_renderer, get_template, render_template, and
render_template_to_response.

• Add deprecation warning for import of pyramid.zcml.zcml_configure and pyramid.


zcml.file_configure.

• The pyramid_alchemy paster template had a typo, preventing an import from working.

• Fix apparent failures when calling pyramid.traversal.find_model(root, path) or


pyramid.traversal.traverse(path) when path is (erroneously) a Unicode object. The
user is meant to pass these APIs a string object, never a Unicode object. In practice, however, users
indeed pass Unicode. Because the string that is passed must be ASCII encodeable, now, if they pass
a Unicode object, its data is eagerly converted to an ASCII string rather than being passed along to
downstream code as a convenience to the user and to prevent puzzling second-order failures from
cropping up (all failures will occur within pyramid.traversal.traverse rather than later
down the line as the result of calling e.g. traversal_path).

Backwards Incompatibilities

• The pyramid.testing.zcml_configure API has been removed. It had been advertised as


removed since repoze.bfg 1.2a1, but hadn’t actually been.

Deprecations

• The pyramid.settings.get_settings API is now deprecated. Use pyramid.


threadlocals.get_current_registry().settings instead or use the settings
attribute of the registry available from the request (request.registry.settings).

0.6. Change History 1101


The Pyramid Web Framework, Version 1.9.4

Documentation

• Removed zodbsessions tutorial chapter. It’s still useful, but we now have a SessionFactory
abstraction which competes with it, and maintaining documentation on both ways to do it is a dis-
traction.

Internal

• Replace Twill with WebTest in internal integration tests (avoid deprecation warnings generated by
Twill).

1.0a3 (2010-11-16)

Features

• Added Mako TemplateLookup settings for mako.error_handler, mako.


default_filters, and mako.imports.

• Normalized all paster templates: each now uses the name main to represent the function that returns
a WSGI application, each now uses WebError, each now has roughly the same shape of develop-
ment.ini style.

• Added class vars matchdict and matched_route to pyramid.request.Request. Each


is set to None.

• New API method: pyramid.settings.asbool.

• New API methods for pyramid.request.Request: model_url, route_url, and


static_url. These are simple passthroughs for their respective functions in pyramid.url.

• The settings object which used to be available only when request.settings.


get_settings was called is now available as registry.settings (e.g. request.
registry.settings in view code).

1102 Contents
The Pyramid Web Framework, Version 1.9.4

Bug Fixes

• The pylons_* paster templates erroneously used the {squiggly} routing syntax as the pattern
supplied to add_route. This style of routing is not supported. They were replaced with :colon
style route patterns.

• The pylons_* paster template used the same string (your_app_secret_string) for the
session.secret setting in the generated development.ini. This was a security risk if
left unchanged in a project that used one of the templates to produce production applications. It now
uses a randomly generated string.

Documentation

• ZODB+traversal wiki (wiki) tutorial updated due to changes to pyramid_zodb paster template.

• SQLAlchemy+urldispach wiki (wiki2) tutorial updated due to changes to


pyramid_routesalchemy paster template.

• Documented the matchdict and matched_route attributes of the request object in the Request
API documentation.

Deprecations

• Obtaining the settings object via registry.{get|query}Utility(ISettings) is


now deprecated. Instead, obtain the settings object via the registry.settings attribute.
A backwards compatibility shim was added to the registry object to register the settings object as
an ISettings utility when setattr(registry, 'settings', foo) is called, but it will be
removed in a later release.

• Obtaining the settings object via pyramid.settings.get_settings is now deprecated.


Obtain it as the settings attribute of the registry now (obtain the registry via pyramid.
threadlocal.get_registry or as request.registry).

0.6. Change History 1103


The Pyramid Web Framework, Version 1.9.4

Behavior Differences

• Internal: ZCML directives no longer call get_current_registry() if there’s a registry attribute on


the ZCML context (kill off use of threadlocals).

• Internal: Chameleon template renderers now accept two arguments: path and lookup. Lookup
will be an instance of a lookup class which supplies (late-bound) arguments for debug, reload, and
translate. Any third-party renderers which use (the non-API) function pyramid.renderers.
template_renderer_factory will need to adjust their implementations to obey the new call-
back argument list. This change was to kill off inappropriate use of threadlocals.

1.0a2 (2010-11-09)

Documentation

• All references to events by interface (e.g. pyramid.interfaces.INewRequest) have been


changed to reference their concrete classes (e.g. pyramid.events.NewRequest) in documen-
tation about making subscriptions.

• All references to Pyramid-the-application were changed from mod-pyramid to app-Pyramid. A


custom role setting was added to docs/conf.py to allow for this. (internal)

1.0a1 (2010-11-05)

Features (delta from BFG 1.3)

• Mako templating renderer supports resource specification format for template lookups and within
Mako templates. Absolute filenames must be used in Pyramid to avoid this lookup process.

• Add pyramid.httpexceptions module, which is a facade for the webob.exc module.

• Direct built-in support for the Mako templating language.

• A new configurator method exists: add_handler. This method adds a Pylons-style ”view han-
dler” (such a thing used to be called a ”controller” in Pylons 1.0).

• New argument to configurator: session_factory.

1104 Contents
The Pyramid Web Framework, Version 1.9.4

• New method on configurator: set_session_factory

• Using request.session now returns a (dictionary-like) session object if a session factory has
been configured.

• The request now has a new attribute: tmpl_context for benefit of Pylons users.

• The decorator previously known as pyramid.view.bfg_view is now known most formally as


pyramid.view.view_config in docs and paster templates. An import of pyramid.view.
bfg_view, however, will continue to work ”forever”.

• New API methods in pyramid.session: signed_serialize and


signed_deserialize.

• New interface: pyramid.interfaces.IRendererInfo. An object of this type is passed to


renderer factory constructors (see ”Backwards Incompatibilities”).

• New event type: pyramid.interfaces.IBeforeRender. An object of this type is sent as an


event before a renderer is invoked (but after the application-level renderer globals factory added via
pyramid.configurator.configuration.set_renderer_globals_factory, if
any, has injected its own keys). Applications may now subscribe to the IBeforeRender event
type in order to introspect the and modify the set of renderer globals before they are passed to a
renderer. The event object iself has a dictionary-like interface that can be used for this purpose. For
example:

from repoze.events import subscriber


from pyramid.interfaces import IRendererGlobalsEvent

@subscriber(IRendererGlobalsEvent)
def add_global(event):
event['mykey'] = 'foo'

If a subscriber attempts to add a key that already exist in the renderer globals dictionary, a
KeyError is raised. This limitation is due to the fact that subscribers cannot be ordered rela-
tive to each other. The set of keys added to the renderer globals dictionary by all subscribers and
app-level globals factories must be unique.

• New class: pyramid.response.Response. This is a pure facade for webob.Response


(old code need not change to use this facade, it’s existence is mostly for vanity and documentation-
generation purposes).

• All preexisting paster templates (except zodb) now use ”imperative” configuration (starter,
routesalchemy, alchemy).

• A new paster template named pyramid_starter_zcml exists, which uses declarative configu-
ration.

0.6. Change History 1105


The Pyramid Web Framework, Version 1.9.4

Documentation (delta from BFG 1.3)

• Added a pyramid.httpexceptions API documentation chapter.

• Added a pyramid.session API documentation chapter.

• Added a Session Objects narrative documentation chapter.

• Added an API chapter for the pyramid.personality module.

• Added an API chapter for the pyramid.response module.

• All documentation which previously referred to webob.Response now uses pyramid.


response.Response instead.

• The documentation has been overhauled to use imperative configuration, moving declarative con-
figuration (ZCML) explanations to a separate narrative chapter declarative.rst.

• The ZODB Wiki tutorial was updated to take into account changes to the pyramid_zodb paster
template.

• The SQL Wiki tutorial was updated to take into account changes to the
pyramid_routesalchemy paster template.

Backwards Incompatibilities (with BFG 1.3)

• There is no longer an IDebugLogger registered as a named utility with the name repoze.bfg.
debug.

• The logger which used to have the name of repoze.bfg.debug now has the name pyramid.
debug.

• The deprecated API pyramid.testing.registerViewPermission has been removed.

• The deprecated API named pyramid.testing.registerRoutesMapper has been re-


moved.

• The deprecated API named pyramid.request.get_request was removed.

• The deprecated API named pyramid.security.Unauthorized was removed.

1106 Contents
The Pyramid Web Framework, Version 1.9.4

• The deprecated API named pyramid.view.view_execution_permitted was removed.

• The deprecated API named pyramid.view.NotFound was removed.

• The bfgshell paster command is now named pshell.

• The Venusian ”category” for all built-in Venusian decorators (e.g. subscriber and
view_config/bfg_view) is now pyramid instead of bfg.

• pyramid.renderers.rendered_response function removed; use render_pyramid.


renderers.render_to_response instead.

• Renderer factories now accept a renderer info object rather than an absolute resource specification or
an absolute path. The object has the following attributes: name (the renderer= value), package
(the ’current package’ when the renderer configuration statement was found), type: the renderer
type, registry: the current registry, and settings: the deployment settings dictionary.

Third-party repoze.bfg renderer implementations that must be ported to Pyramid will need to
account for this.

This change was made primarily to support more flexible Mako template rendering.

• The presence of the key repoze.bfg.message in the WSGI environment when an exception oc-
curs is now deprecated. Instead, code which relies on this environ value should use the exception
attribute of the request (e.g. request.exception[0]) to retrieve the message.

• The values bfg_localizer and bfg_locale_name kept on the request during internation-
alization for caching purposes were never APIs. These however have changed to localizer and
locale_name, respectively.

• The default cookie_name value of the authtktauthenticationpolicy ZCML now de-


faults to auth_tkt (it used to default to repoze.bfg.auth_tkt).

• The default cookie_name value of the pyramid.authentication.


AuthTktAuthenticationPolicy constructor now defaults to auth_tkt (it used to
default to repoze.bfg.auth_tkt).

• The request_type argument to the view ZCML directive, the pyramid.configuration.


Configurator.add_view method, or the pyramid.view.view_config decorator (nee
bfg_view) is no longer permitted to be one of the strings GET, HEAD, PUT, POST or DELETE, and
now must always be an interface. Accepting the method-strings as request_type was a back-
wards compatibility strategy servicing repoze.bfg 1.0 applications. Use the request_method
parameter instead to specify that a view a string request-method predicate.

0.6. Change History 1107


The Pyramid Web Framework, Version 1.9.4

0.6.10 repoze.bfg Change History (previous name for Pyramid)

1.3b1 (2010-10-25)

Features

• The paster template named bfg_routesalchemy has been updated to use SQLAlchemy
declarative syntax. Thanks to Ergo^.

Bug Fixes

• When a renderer factory could not be found, a misleading error message was raised if the renderer
name was not a string.

Documentation

• The ””bfgwiki2” (SQLAlchemy + url dispatch) tutorial has been updated slightly. In particular, the
source packages no longer attempt to use a private index, and the recommended Python version
is now 2.6. It was also updated to take into account the changes to the bfg_routesalchemy
template used to set up an environment.
• The ”bfgwiki” (ZODB + traversal) tutorial has been updated slightly. In particular, the source pack-
ages no longer attempt to use a private index, and the recommended Python version is now 2.6.

1.3a15 (2010-09-30)

Features

• The repoze.bfg.traversal.traversal_path API now eagerly attempts to encode a


Unicode path into ASCII before attempting to split it and decode its segments. This is for con-
venience, effectively to allow a (stored-as-Unicode-in-a-database, or retrieved-as-Unicode-from-a-
request-parameter) Unicode path to be passed to find_model, which eventually internally uses
the traversal_path function under the hood. In version 1.2 and prior, if the path was Uni-
code, that Unicode was split on slashes and each resulting segment value was Unicode. An in-
appropriate call to the decode() method of a resulting Unicode path segment could cause a
UnicodeDecodeError to occur even if the Unicode representation of the path contained no
’high order’ characters (it effectively did a ”double decode”). By converting the Unicode path argu-
ment to ASCII before we attempt to decode and split, genuine errors will occur in a more obvious
place while also allowing us to handle (for convenience) the case that it’s a Unicode representation
formed entirely from ASCII-compatible characters.

1108 Contents
The Pyramid Web Framework, Version 1.9.4

1.3a14 (2010-09-14)

Bug Fixes

• If an exception view was registered through the legacy set_notfound_view or


set_forbidden_view APIs, the context sent to the view was incorrect (could be None
inappropriately).

Features

• Compatibility with WebOb 1.0.

Requirements

• Now requires WebOb >= 1.0.

Backwards Incompatibilities

• Due to changes introduced WebOb 1.0, the repoze.bfg.request.make_request_ascii


event subscriber no longer works, so it has been removed. This subscriber was meant to be used in a
deployment so that code written before BFG 0.7.0 could run unchanged. At this point, such code will
need to be rewritten to expect Unicode from request.GET, request.POST and request.
params or it will need to be changed to use request.str_POST, request.str_GET and/or
request.str_params instead of the non-str versions of same, as the non-str versions of
the same APIs always now perform decoding to Unicode.

Errata

• A prior changelog entry asserted that the INewResponse event was not sent to listeners if the
response was not ”valid” (if a view or renderer returned a response object that did not have a sta-
tus/headers/app_iter). This is not true in this release, nor was it true in 1.3a13.

0.6. Change History 1109


The Pyramid Web Framework, Version 1.9.4

1.3a13 (2010-09-14)

Bug Fixes

• The traverse route predicate could not successfully generate a traversal path.

Features

• In support of making it easier to configure applications which are ”secure by default”, a default
permission feature was added. If supplied, the default permission is used as the permission string to
all view registrations which don’t otherwise name a permission. These APIs are in support of that:

– A new constructor argument was added to the Configurator: default_permission.

– A new method was added to the Configurator: set_default_permission.

– A new ZCML directive was added: default_permission.

• Add a new request API: request.add_finished_callback. Finished callbacks are called


by the router unconditionally near the very end of request processing. See the ”Using Finished
Callbacks” section of the ”Hooks” narrative chapter of the documentation for more information.

• A request.matched_route attribute is now added to the request when a route has matched.
Its value is the ”route” object that matched (see the IRoute interface within repoze.bfg.
interfaces API documentation for the API of a route object).

• The exception attribute of the request is now set slightly earlier and in a slightly different set
of scenarios, for benefit of ”finished callbacks” and ”response callbacks”. In previous versions, the
exception attribute of the request was not set at all if an exception view was not found. In this
version, the request.exception attribute is set immediately when an exception is caught by
the router, even if an exception view could not be found.

• The add_route method of a Configurator now accepts a pregenerator argument. The pregen-
erator for the resulting route is called by route_url in order to adjust the set of arguments passed
to it by the user for special purposes, such as Pylons ’subdomain’ support. It will influence the URL
returned by route_url. See the repoze.bfg.interfaces.IRoutePregenerator in-
terface for more information.

1110 Contents
The Pyramid Web Framework, Version 1.9.4

Backwards Incompatibilities

• The router no longer sets the value wsgiorg.routing_args into the environ when a route
matches. The value used to be something like ((), matchdict). This functionality was only
ever obliquely referred to in change logs; it was never documented as an API.

• The exception attribute of the request now defaults to None. In prior versions, the request.
exception attribute did not exist if an exception was not raised by user code during request pro-
cessing; it only began existence once an exception view was found.

Deprecations

• The repoze.bfg.interfaces.IWSGIApplicationCreatedEvent event interface was


renamed to repoze.bfg.interfaces.IApplicationCreated. Likewise, the repoze.
bfg.events.WSGIApplicationCreatedEvent class was renamed to repoze.bfg.
events.ApplicationCreated. The older aliases will continue to work indefinitely.

• The repoze.bfg.interfaces.IAfterTraversal event interface was renamed to


repoze.bfg.interfaces.IContextFound. Likewise, the repoze.bfg.events.
AfterTraversal class was renamed to repoze.bfg.events.ContextFound. The older
aliases will continue to work indefinitely.

• References to the WSGI environment values bfg.routes.matchdict and bfg.routes.


route were removed from documentation. These will stick around internally for several more re-
leases, but it is request.matchdict and request.matched_route are now the ”official”
way to obtain the matchdict and the route object which resulted in the match.

Documentation

• Added documentation for the default_permission ZCML directive.

• Added documentation for the default_permission constructor value and the


set_default_permission method in the Configurator API documentation.

• Added a new section to the ”security” chapter named ”Setting a Default Permission”.

• Document renderer_globals_factory and request_factory arguments to Configu-


rator constructor.

0.6. Change History 1111


The Pyramid Web Framework, Version 1.9.4

• Added two sections to the ”Hooks” chapter of the documentation: ”Using Response Callbacks” and
”Using Finished Callbacks”.

• Added documentation of the request.exception attribute to the repoze.bfg.request.


Request API documentation.

• Added glossary entries for ”response callback” and ”finished callback”.

• The ”Request Processing” narrative chapter has been updated to note finished and response callback
steps.

• New interface in interfaces API documentation: IRoutePregenerator.

• Added a ”The Matched Route” section to the URL Dispatch narrative docs chapter, detailing the
matched_route attribute.

1.3a12 (2010-09-08)

Bug Fixes

• Fix a bug in repoze.bfg.url.static_url URL generation: if two resource specifications


were used to create two separate static views, but they shared a common prefix, it was possible that
static_url would generate an incorrect URL.

• Fix another bug in repoze.bfg.static_url URL generation: too many slashes in generated
URL.

• Prevent a race condition which could result in a RuntimeError when rendering a Chameleon
template that has not already been rendered once. This would usually occur directly after a restart,
when more than one person or thread is trying to execute the same view at the same time: https:
//bugs.launchpad.net/karl3/+bug/621364

Features

• The argument to repoze.bfg.configuration.Configurator.add_route which was


previously called path is now called pattern for better explicability. For backwards compatibil-
ity purposes, passing a keyword argument named path to add_route will still work indefinitely.

• The path attribute to the ZCML route directive is now named pattern for better explicability.
The older path attribute will continue to work indefinitely.

1112 Contents
The Pyramid Web Framework, Version 1.9.4

Documentation

• All narrative, API, and tutorial docs which referred to a route pattern as a path have now been
updated to refer to them as a pattern.

• The repoze.bfg.interfaces API documentation page is now rendered via repoze.


sphinx.autointerface.

• The URL Dispatch narrative chapter now refers to the interfaces chapter to explain the API of
an IRoute object.

Paster Templates

• The routesalchemy template has been updated to use pattern in its route declarations rather than
path.

Dependencies

• tests_require now includes repoze.sphinx.autointerface as a dependency.

Internal

• Add an API to the Configurator named get_routes_mapper. This returns an object im-
plementing the IRoutesMapper interface.

• The repoze.bfg.urldispatch.RoutesMapper object now has a get_route method


which returns a single Route object or None.

• A new interface repoze.bfg.interfaces.IRoute was added. The repoze.bfg.


urldispatch.Route object implements this interface.

• The canonical attribute for accessing the routing pattern from a route object is now pattern rather
than path.

• Use hash() rather than id() when computing the ”phash” of a custom route/view predicate in
order to allow the custom predicate some control over which predicates are ”equal”.

0.6. Change History 1113


The Pyramid Web Framework, Version 1.9.4

• Use response.headerlist.append instead of response.headers.add in repoze.


bfg.request.add_global_response_headers in case the response is not a WebOb re-
sponse.

• The repoze.bfg.urldispatch.Route constructor (not an API) now accepts a dif-


ferent ordering of arguments. Previously it was (pattern, name, factory=None,
predicates=()). It is now (name, pattern, factory=None, predicates=()).
This is in support of consistency with configurator.add_route.

• The repoze.bfg.urldispatch.RoutesMapper.connect method (not an API)


now accepts a different ordering of arguments. Previously it was (pattern, name,
factory=None, predicates=()). It is now (name, pattern, factory=None,
predicates=()). This is in support of consistency with configurator.add_route.

1.3a11 (2010-09-05)

Bug Fixes

• Process the response callbacks and the NewResponse event earlier, to enable mutations to the re-
sponse to take effect.

1.3a10 (2010-09-05)

Features

• A new repoze.bfg.request.Request.add_response_callback API has been


added. This method is documented in the new repoze.bfg.request API chapter. It can be
used to influence response values before a concrete response object has been created.

• The repoze.bfg.interfaces.INewResponse interface now includes a request at-


tribute; as a result, a handler for INewResponse now has access to the request which caused the
response.

• Each of the follow methods of the Configurator now allow the below-named arguments to be passed
as ”dotted name strings” (e.g. ”foo.bar.baz”) rather than as actual implementation objects that must
be imported:

setup_registry root_factory, authentication_policy, authorization_policy, debug_logger, lo-


cale_negotiator, request_factory, renderer_globals_factory

1114 Contents
The Pyramid Web Framework, Version 1.9.4

add_subscriber subscriber, iface

derive_view view

add_view view, for_, context, request_type, containment

add_route() view, view_for, factory, for_, view_context

scan package

add_renderer factory

set_forbidden_view view

set_notfound_view view

set_request_factory factory

set_renderer_globals_factory() factory

set_locale_negotiator negotiator

testing_add_subscriber event_iface

Bug Fixes

• The route pattern registered internally for a local ”static view” (either via the static ZCML direc-
tive or via the add_static_view method of the configurator) was incorrect. It was regsistered
for e.g. static*traverse, while it should have been registered for static/*traverse.
Symptom: two static views could not reliably be added to a system when they both shared the same
path prefix (e.g. /static and /static2).

Backwards Incompatibilities

• The INewResponse event is now not sent to listeners if the response returned by view code (or
a renderer) is not a ”real” response (e.g. if it does not have .status, .headerlist and .
app_iter attribtues).

0.6. Change History 1115


The Pyramid Web Framework, Version 1.9.4

Documentation

• Add an API chapter for the repoze.bfg.request module, which includes documentation for
the repoze.bfg.request.Request class (the ”request object”).

• Modify the ”Request and Response” narrative chapter to reference the new repoze.bfg.
request API chapter. Some content was moved from this chapter into the API documentation
itself.

• Various changes to denote that Python dotted names are now allowed as input to Configurator meth-
ods.

Internal

• The (internal) feature which made it possible to attach a global_response_headers attribute


to the request (which was assumed to contain a sequence of header key/value pairs which would later
be added to the response by the router), has been removed. The functionality of repoze.bfg.
request.Request.add_response_callback takes its place.

• The repoze.bfg.events.NewResponse class’s construct has changed: it now must be cre-


ated with (request, response) rather than simply (response).

1.3a9 (2010-08-22)

Features

• The Configurator now accepts a dotted name string to a package as a package constructor argu-
ment. The package argument was previously required to be a package object (not a dotted name
string).

• The repoze.bfg.configuration.Configurator.with_package method was added.


This method returns a new Configurator using the same application registry as the configurator object
it is called upon. The new configurator is created afresh with its package constructor argument set
to the value passed to with_package. This feature will make it easier for future BFG versions to
allow dotted names as arguments in places where currently only object references are allowed (the
work to allow dotted names isntead of object references everywhere has not yet been done, however).

1116 Contents
The Pyramid Web Framework, Version 1.9.4

• The new repoze.bfg.configuration.Configurator.maybe_dotted method re-


solves a Python dotted name string supplied as its dotted argument to a global Python object.
If the value cannot be resolved, a repoze.bfg.configuration.ConfigurationError
is raised. If the value supplied as dotted is not a string, the value is returned unconditionally
without any resolution attempted.

• The new repoze.bfg.configuration.Configurator.


absolute_resource_spec method resolves a potentially relative ”resource specification”
string into an absolute version. If the value supplied as relative_spec is not a string, the value
is returned unconditionally without any resolution attempted.

Backwards Incompatibilities

• The functions in repoze.bfg.renderers named render and render_to_response in-


troduced in 1.3a6 previously took a set of **values arguments for the values to be passed to the
renderer. This was wrong, as renderers don’t need to accept only dictionaries (they can accept any
type of object). Now, the value sent to the renderer must be supplied as a positional argument named
value. The request argument is still a keyword argument, however.

• The functions in repoze.bfg.renderers named render and render_to_response


now accept an additonal keyword argument named package.

• The get_renderer API in repoze.bfg.renderers now accepts a package argument.

Documentation

• The ZCML include directive docs were incorrect: they specified filename rather than (the
correct) file as an allowable attribute.

Internal

• The repoze.bfg.resource.resolve_resource_spec function can now accept a pack-


age object as its pname argument instead of just a package name.

• The _renderer_factory_from_name and _renderer_from_name methods of the Con-


figurator were removed. These were never APIs.

0.6. Change History 1117


The Pyramid Web Framework, Version 1.9.4

• The _render, _render_to_response and _make_response functions with repoze.


bfg.render (added in 1.3a6) have been removed.

• A new helper class repoze.bfg.renderers.RendererHelper was added.

• The _map_view function of repoze.bfg.configuration now takes only a renderer_name


argument instead of both a renderer and renderer``_name argument. It also
takes a ``package argument now.

• Use imp.get_suffixes indirection in repoze.bfg.path.package_name instead of


hardcoded .py .pyc and .pyo to use for comparison when attemtping to decide if a directory
is a package.

• Make tests runnable again under Jython (although they do not all pass currently).

• The reify decorator now maintains the docstring of the function it wraps.

1.3a8 (2010-08-08)

Features

• New public interface: repoze.bfg.exceptions.IExceptionResponse. This interface


is provided by all internal exception classes (such as repoze.bfg.exceptions.NotFound
and repoze.bfg.exceptions.Forbidden), instances of which are both exception objects
and can behave as WSGI response objects. This interface is made public so that exception classes
which are also valid WSGI response factories can be configured to implement them or exception
instances which are also or response instances can be configured to provide them.

• New API class: repoze.bfg.view.AppendSlashNotFoundViewFactory.

There can only be one Not Found view in any repoze.bfg application. Even if you use repoze.
bfg.view.append_slash_notfound_view as the Not Found view, repoze.bfg still
must generate a 404 Not Found response when it cannot redirect to a slash-appended URL;
this not found response will be visible to site users.

If you don’t care what this 404 response looks like, and you only need redirections to slash-appended
route URLs, you may use the repoze.bfg.view.append_slash_notfound_view object
as the Not Found view. However, if you wish to use a custom notfound view callable when a URL
cannot be redirected to a slash-appended URL, you may wish to use an instance of the repoze.
bfg.view.AppendSlashNotFoundViewFactory class as the Not Found view, supplying
the notfound view callable as the first argument to its constructor. For instance:

1118 Contents
The Pyramid Web Framework, Version 1.9.4

from repoze.bfg.exceptions import NotFound


from repoze.bfg.view import AppendSlashNotFoundViewFactory

def notfound_view(context, request):


return HTTPNotFound('It aint there, stop trying!')

custom_append_slash = AppendSlashNotFoundViewFactory(notfound_
,→view)

config.add_view(custom_append_slash, context=NotFound)

The notfound_view supplied must adhere to the two-argument view callable calling convention
of (context, request) (context will be the exception object).

Documentation

• Expanded the ”Cleaning Up After a Request” section of the URL Dispatch narrative chapter.

• Expanded the ”Redirecting to Slash-Appended Routes” section of the URL Dispatch narrative chap-
ter.

Internal

• Previously, two default view functions were registered at Configurator setup (one for repoze.
bfg.exceptions.NotFound named default_notfound_view and one for repoze.
bfg.exceptions.Forbidden named default_forbidden_view) to render internal ex-
ception responses. Those default view functions have been removed, replaced with a generic default
view function which is registered at Configurator setup for the repoze.bfg.interfaces.
IExceptionResponse interface that simply returns the exception instance; the NotFound and
Forbidden classes are now still exception factories but they are also response factories which gen-
erate instances that implement the new repoze.bfg.interfaces.IExceptionResponse
interface.

0.6. Change History 1119


The Pyramid Web Framework, Version 1.9.4

1.3a7 (2010-08-01)

Features

• The repoze.bfg.configuration.Configurator.add_route API now returns the


route object that was added.
• A repoze.bfg.events.subscriber decorator was added. This decorator decorates
module-scope functions, which are then treated as event listeners after a scan() is performed. See
the Events narrative documentation chapter and the repoze.bfg.events module documenta-
tion for more information.

Bug Fixes

• When adding a view for a route which did not yet exist (”did not yet exist” meaning, temporally, a
view was added with a route name for a route which had not yet been added via add_route), the value
of the custom_predicate argument to add_view was lost. Symptom: wrong view matches
when using URL dispatch and custom view predicates together.
• Pattern matches for a :segment marker in a URL dispatch route pattern now always match at least
one character. See ”Backwards Incompatibilities” below in this changelog.

Backwards Incompatibilities

• A bug existed in the regular expression to do URL matching. As an example, the URL matching ma-
chinery would cause the pattern /{foo} to match the root URL / resulting in a match dictionary
of {'foo':u''} or the pattern /{fud}/edit might match the URL ``//edit re-
sulting in a match dictionary of {'fud':u''}. It was always the intent that :segment markers
in the pattern would need to match at least one character, and never match the empty string. This,
however, means that in certain circumstances, a routing match which your application inadvertently
depended upon may no longer happen.

Documentation

• Added description of the repoze.bfg.events.subscriber decorator to the Events narrative


chapter.
• Added repoze.bfg.events.subscriber API documentation to repoze.bfg.events
API docs.
• Added a section named ”Zope 3 Enforces ’TTW’ Authorization Checks By Default; BFG Does Not”
to the ”Design Defense” chapter.

1120 Contents
The Pyramid Web Framework, Version 1.9.4

1.3a6 (2010-07-25)

Features

• New argument to repoze.bfg.configuration.Configurator.add_route and the


route ZCML directive: traverse. If you would like to cause the context to be some-
thing other than the root object when this route matches, you can spell a traversal pattern as the
traverse argument. This traversal pattern will be used as the traversal path: traversal will begin
at the root object implied by this route (either the global root, or the object returned by the factory
associated with this route).

The syntax of the traverse argument is the same as it is for path. For example, if the path pro-
vided is articles/:article/edit, and the traverse argument provided is /:article,
when a request comes in that causes the route to match in such a way that the article match value
is ’1’ (when the request URI is /articles/1/edit), the traversal path will be generated as /1.
This means that the root object’s __getitem__ will be called with the name 1 during the traversal
phase. If the 1 object exists, it will become the context of the request. The Traversal narrative
has more information about traversal.

If the traversal path contains segment marker names which are not present in the path argument, a
runtime error will occur. The traverse pattern should not contain segment markers that do not
exist in the path.

A similar combining of routing and traversal is available when a route is matched which contains a
*traverse remainder marker in its path. The traverse argument allows you to associate route
patterns with an arbitrary traversal path without using a *traverse remainder marker; instead
you can use other match information.

Note that the traverse argument is ignored when attached to a route that has a *traverse
remainder marker in its path.

• A new method of the Configurator exists: set_request_factory. If used, this method


will set the factory used by the repoze.bfg router to create all request objects.

• The Configurator constructor takes an additional argument: request_factory. If used,


this argument will set the factory used by the repoze.bfg router to create all request objects.

• The Configurator constructor takes an additional argument: request_factory. If used,


this argument will set the factory used by the repoze.bfg router to create all request objects.

• A new method of the Configurator exists: set_renderer_globals_factory. If used,


this method will set the factory used by the repoze.bfg router to create renderer globals.

0.6. Change History 1121


The Pyramid Web Framework, Version 1.9.4

• A new method of the Configurator exists: get_settings. If used, this method will
return the current settings object (performs the same job as the repoze.bfg.settings.
get_settings API).

• The Configurator constructor takes an additional argument:


renderer_globals_factory. If used, this argument will set the factory used by the
repoze.bfg router to create renderer globals.

• Add repoze.bfg.renderers.render, repoze.bfg.renderers.


render_to_response and repoze.bfg.renderers.get_renderer functions.
These are imperative APIs which will use the same rendering machinery used by view configura-
tions with a renderer= attribute/argument to produce a rendering or renderer. Because these
APIs provide a central API for all rendering, they now form the preferred way to perform imperative
template rendering. Using functions named render_* from modules such as repoze.bfg.
chameleon_zpt and repoze.bfg.chameleon_text is now discouraged (although not
deprecated). The code the backing older templating-system-specific APIs now calls into the newer
repoze.bfg.renderer code.

• The repoze.bfg.configuration.Configurator.testing_add_template has


been renamed to testing_add_renderer. A backwards compatibility alias is present using
the old name.

Documentation

• The Hybrid narrative chapter now contains a description of the traverse route argument.

• The Hooks narrative chapter now contains sections about changing the request factory and adding
a renderer globals factory.

• The API documentation includes a new module: repoze.bfg.renderers.

• The Templates chapter was updated; all narrative that used templating-specific APIs
within examples to perform rendering (such as the repoze.bfg.chameleon_zpt.
render_template_to_response method) was changed to use repoze.bfg.
renderers.render_* functions.

Bug Fixes

• The header predicate (when used as either a view predicate or a route predicate) had a problem
when specified with a name/regex pair. When the header did not exist in the headers dictionary, the
regex match could be fed None, causing it to throw a TypeError: expected string or
buffer exception. Now, the predicate returns False as intended.

1122 Contents
The Pyramid Web Framework, Version 1.9.4

Deprecations

• The repoze.bfg.renderers.rendered_response function was never an official API,


but may have been imported by extensions in the wild. It is officially deprecated in this release. Use
repoze.bfg.renderers.render_to_response instead.

• The following APIs are documentation deprecated (meaning they are officially deprecated in doc-
umentation but do not raise a deprecation error upon their usage, and may continue to work for an
indefinite period of time):

In the repoze.bfg.chameleon_zpt module: get_renderer, get_template,


render_template, render_template_to_response. The suggested alternatives are
documented within the docstrings of those methods (which are still present in the documentation).

In the repoze.bfg.chameleon_text module: get_renderer, get_template,


render_template, render_template_to_response. The suggested alternatives are
documented within the docstrings of those methods (which are still present in the documentation).

In general, to perform template-related functions, one should now use the various methods in the
repoze.bfg.renderers module.

Backwards Incompatibilities

• A new internal exception class (not an API) named repoze.bfg.exceptions.


PredicateMismatch now exists. This exception is currently raised when no constituent
view of a multiview can be called (due to no predicate match). Previously, in this situation, a
repoze.bfg.exceptions.NotFound was raised. We provide backwards compatibility for
code that expected a NotFound to be raised when no predicates match by causing repoze.
bfg.exceptions.PredicateMismatch to inherit from NotFound. This will cause any
exception view registered for NotFound to be called when a predicate mismatch occurs, as was
the previous behavior.

There is however, one perverse case that will expose a backwards incompatibility. If 1) you had
a view that was registered as a member of a multiview 2) this view explicitly raised a NotFound
exception in order to proceed to the next predicate check in the multiview, that code will now behave
differently: rather than skipping to the next view match, a NotFound will be raised to the top-level
exception handling machinery instead. For code to be depending upon the behavior of a view raising
NotFound to proceed to the next predicate match, would be tragic, but not impossible, given that
NotFound is a public interface. repoze.bfg.exceptions.PredicateMismatch is not
a public API and cannot be depended upon by application code, so you should not change your
view code to raise PredicateMismatch. Instead, move the logic which raised the NotFound
exception in the view out into a custom view predicate.

0.6. Change History 1123


The Pyramid Web Framework, Version 1.9.4

• If, when you run your application’s unit test suite under BFG 1.3, a KeyError nam-
ing a template or a ValueError indicating that a ’renderer factory’ is not registered
may is raised (e.g. ValueError: No factory for renderer named '.pt' when
looking up karl.views:templates/snippets.pt), you may need to perform some
extra setup in your test code.

The best solution is to use the repoze.bfg.configuration.Configurator.


testing_add_renderer (or, alternately the deprecated repoze.bfg.testing.
registerTemplateRenderer or registerDummyRenderer) API within the code
comprising each individual unit test suite to register a ”dummy” renderer for each of the templates
and renderers used by code under test. For example:

config = Configurator()
config.testing_add_renderer('karl.views:templates/snippets.pt')

This will register a basic dummy renderer for this particular missing template. The
testing_add_renderer API actually returns the renderer, but if you don’t care about how
the render is used, you don’t care about having a reference to it either.

A more rough way to solve the issue exists. It causes the ”real” template implementations to be used
while the system is under test, which is suboptimal, because tests will run slower, and unit tests won’t
actually be unit tests, but it is easier. Always ensure you call the setup_registry() method of
the Configurator . Eg:

reg = MyRegistry()
config = Configurator(registry=reg)
config.setup_registry()

Calling setup_registry only has an effect if you’re passing in a registry argument to the
Configurator constructor. setup_registry is called by the course of normal operations anyway
if you do not pass in a registry.

If your test suite isn’t using a Configurator yet, and is still using the older repoze.bfg.testing
APIs name setUp or cleanUp, these will register the renderers on your behalf.

A variant on the symptom for this theme exists: you may already be dutifully register-
ing a dummy template or renderer for a template used by the code you’re testing using
testing_register_renderer or registerTemplateRenderer, but (perhaps unbe-
knownst to you) the code under test expects to be able to use a ”real” template renderer imple-
mentation to retrieve or render another template that you forgot was being rendered as a side effect
of calling the code you’re testing. This happened to work because it found the real template while
the system was under test previously, and now it cannot. The solution is the same.

1124 Contents
The Pyramid Web Framework, Version 1.9.4

It may also help reduce confusion to use a resource specification to specify the template path in the
test suite and code rather than a relative path in either. A resource specification is unambiguous,
while a relative path needs to be relative to ”here”, where ”here” isn’t always well-defined (”here” in
a test suite may or may not be the same as ”here” in the code under test).

1.3a5 (2010-07-14)

Features

• New internal exception: repoze.bfg.exceptions.URLDecodeError. This URL is a sub-


class of the built-in Python exception named UnicodeDecodeError.

• When decoding a URL segment to Unicode fails, the exception raised is now repoze.bfg.
exceptions.URLDecodeError instead of UnicodeDecodeError. This makes it possible
to register an exception view invoked specifically when repoze.bfg cannot decode a URL.

Bug Fixes

• Fix regression in repoze.bfg.configuration.Configurator.add_static_view.


Before 1.3a4, view names that contained a slash were supported as route prefixes. 1.3a4 broke
this by trying to treat them as full URLs.

Documentation

• The repoze.bfg.exceptions.URLDecodeError exception was added to the exceptions


chapter of the API documentation.

Backwards Incompatibilities

• in previous releases, when a URL could not be decoded from UTF-8 during traversal, a
TypeError was raised. Now the error which is raised is a repoze.bfg.exceptions.
URLDecodeError.

0.6. Change History 1125


The Pyramid Web Framework, Version 1.9.4

1.3a4 (2010-07-03)

Features

• Undocumented hook: make get_app and get_root of the repoze.bfg.paster.


BFGShellCommand hookable in cases where endware may interfere with the default versions.

• In earlier versions, a custom route predicate associated with a url dispatch route (each of the predicate
functions fed to the custom_predicates argument of repoze.bfg.configuration.
Configurator.add_route) has always required a 2-positional argument signature, e.g.
(context, request). Before this release, the context argument was always None.

As of this release, the first argument passed to a predicate is now a dictionary conventionally named
info consisting of route, and match. match is a dictionary: it represents the arguments
matched in the URL by the route. route is an object representing the route which was matched.

This is useful when predicates need access to the route match. For example:

def any_of(segment_name, *args):


def predicate(info, request):
if info['match'][segment_name] in args:
return True
return predicate

num_one_two_or_three = any_of('num, 'one', 'two', 'three')

add_route('num', '/:num', custom_predicates=(num_one_two_or_


,→three,))

The route object is an object that has two useful attributes: name and path. The name attribute
is the route name. The path attribute is the route pattern. An example of using the route in a set
of route predicates:

def twenty_ten(info, request):


if info['route'].name in ('ymd', 'ym', 'y'):
return info['match']['year'] == '2010'

add_route('y', '/:year', custom_predicates=(twenty_ten,))


add_route('ym', '/:year/:month', custom_predicates=(twenty_ten,
,→))

add_route('ymd', '/:year/:month:/day', custom_


,→predicates=(twenty_ten,))

1126 Contents
The Pyramid Web Framework, Version 1.9.4

• The repoze.bfg.url.route_url API has changed. If a keyword _app_url is present in


the arguments passed to route_url, this value will be used as the protocol/hostname/port/leading
path prefix of the generated URL. For example, using an _app_url of http://example.
com:8080/foo would cause the URL http://example.com:8080/foo/fleeb/flub
to be returned from this function if the expansion of the route pattern associated with the
route_name expanded to /fleeb/flub.

• It is now possible to use a URL as the name argument fed to repoze.bfg.configuration.


Configurator.add_static_view. When the name argument is a URL, the repoze.
bfg.url.static_url API will generate join this URL (as a prefix) to a path including the
static file name. This makes it more possible to put static media on a separate webserver for produc-
tion, while keeping static media package-internal and served by the development webserver during
development.

Documentation

• The authorization chapter of the ZODB Wiki Tutorial (docs/tutorials/bfgwiki) was changed to
demonstrate authorization via a group rather than via a direct username (thanks to Alex Marandon).

• The authorization chapter of the SQLAlchemy Wiki Tutorial (docs/tutorials/bfgwiki2) was changed
to demonstrate authorization via a group rather than via a direct username.

• Redirect requests for tutorial sources to http://docs.repoze.org/bfgwiki-1.3 and http://docs.repoze.


org/bfgwiki2-1.3/ respectively.

• A section named Custom Route Predicates was added to the URL Dispatch narrative chap-
ter.

• The Static Resources chapter has been updated to mention using static_url to generate URLs
to external webservers.

Internal

• Removed repoze.bfg.static.StaticURLFactory in favor of a new abstraction revolving


around the (still-internal) repoze.bfg.static.StaticURLInfo helper class.

0.6. Change History 1127


The Pyramid Web Framework, Version 1.9.4

1.3a3 (2010-05-01)

Paster Templates

• The bfg_alchemy and bfg_routesalchemy templates no longer register a


handle_teardown event listener which calls DBSession.remove. This was found by
Chris Withers to be unnecessary.

Documentation

• The ”bfgwiki2” (URL dispatch wiki) tutorial code and documentation was changed to remove the
handle_teardown event listener which calls DBSession.remove.

• Any mention of the handle_teardown event listener as used by the paster templates was removed
from the URL Dispatch narrative chapter.

• A section entitled Detecting Available Languages was added to the i18n narrative docs chapter.

1.3a2 (2010-04-28)

Features

• A locale negotiator no longer needs to be registered explicitly. The default locale negotiator at
repoze.bfg.i18n.default_locale_negotiator is now used unconditionally as... um,
the default locale negotiator.

• The default locale negotiator has become more complex.

– First, the negotiator looks for the _LOCALE_ attribute of the request object (possibly set by a
view or an event listener).

– Then it looks for the request.params['_LOCALE_'] value.

– Then it looks for the request.cookies['_LOCALE_'] value.

1128 Contents
The Pyramid Web Framework, Version 1.9.4

Backwards Incompatibilities

• The default locale negotiator now looks for the parameter named _LOCALE_ rather than a parameter
named locale in request.params.

Behavior Changes

• A locale negotiator may now return None, signifying that the default locale should be used.

Documentation

• Documentation concerning locale negotiation in the Internationalizationa and Localization chapter


was updated.

• Expanded portion of i18n narrative chapter docs which discuss working with gettext files.

1.3a1 (2010-04-26)

Features

• Added ”exception views”. When you use an exception (anything that inherits from the Python
Exception builtin) as view context argument, e.g.:

from repoze.bfg.view import bfg_view


from repoze.bfg.exceptions import NotFound
from webob.exc import HTTPNotFound

@bfg_view(context=NotFound)
def notfound_view(request):
return HTTPNotFound()

For the above example, when the repoze.bfg.exceptions.NotFound exception is raised


by any view or any root factory, the notfound_view view callable will be invoked and its response
returned.

Other normal view predicates can also be used in combination with an exception view registration:

0.6. Change History 1129


The Pyramid Web Framework, Version 1.9.4

from repoze.bfg.view import bfg_view


from repoze.bfg.exceptions import NotFound
from webob.exc import HTTPNotFound

@bfg_view(context=NotFound, route_name='home')
def notfound_view(request):
return HTTPNotFound()

The above exception view names the route_name of home, meaning that it will only be called
when the route matched has a name of home. You can therefore have more than one exception view
for any given exception in the system: the ”most specific” one will be called when the set of request
circumstances which match the view registration. The only predicate that cannot be not be used
successfully is name. The name used to look up an exception view is always the empty string.
Existing (pre-1.3) normal views registered against objects inheriting from Exception will con-
tinue to work. Exception views used for user-defined exceptions and system exceptions used as
contexts will also work.
The feature can be used with any view registration mechanism (@bfg_view decorator, ZCML, or
imperative config.add_view styles).
This feature was kindly contributed by Andrey Popp.
• Use ”Venusian” (http://docs.repoze.org/venusian) to perform bfg_view decorator scanning rather
than relying on a BFG-internal decorator scanner. (Truth be told, Venusian is really just a general-
ization of the BFG-internal decorator scanner).
• Internationalization and localization features as documented in the narrative documentation chapter
entitled Internationalization and Localization.
• A new deployment setting named default_locale_name was added. If this string is present
as a Paster .ini file option, it will be considered the default locale name. The default locale name
is used during locale-related operations such as language translation.
• It is now possible to turn on Chameleon template ”debugging mode” for all Chameleon BFG tem-
plates by setting a BFG-related Paster .ini file setting named debug_templates. The ex-
ceptions raised by Chameleon templates when a rendering fails are sometimes less than helpful.
debug_templates allows you to configure your application development environment so that
exceptions generated by Chameleon during template compilation and execution will contain more
helpful debugging information. This mode is on by default in all new projects.
• Add a new method of the Configurator named derive_view which can be used to generate
a BFG view callable from a user-supplied function, instance, or class. This useful for external
framework and plugin authors wishing to wrap callables supplied by their users which follow the
same calling conventions and response conventions as objects that can be supplied directly to BFG
as a view callable. See the derive_view method in the repoze.bfg.configuration.
Configurator docs.

1130 Contents
The Pyramid Web Framework, Version 1.9.4

ZCML

• Add a translationdir ZCML directive to support localization.

• Add a localenegotiator ZCML directive to support localization.

Deprecations

• The exception views feature replaces the need for the set_notfound_view and
set_forbidden_view methods of the Configurator as well as the notfound and
forbidden ZCML directives. Those methods and directives will continue to work for the
foreseeable future, but they are deprecated in the documentation.

Dependencies

• A new install-time dependency on the venusian distribution was added.

• A new install-time dependency on the translationstring distribution was added.

• Chameleon 1.2.3 or better is now required (internationalization and per-template debug settings).

Internal

• View registrations and lookups are now done with three ”requires” arguments instead of two to
accomodate orthogonality of exception views.

• The repoze.bfg.interfaces.IForbiddenView and repoze.bfg.interfaces.


INotFoundView interfaces were removed; they weren’t APIs and they became vestigial with the
addition of exception views.

• Remove repoze.bfg.compat.pkgutil_26.py and import alias repoze.bfg.compat.


walk_packages. These were only required by internal scanning machinery; Venusian replaced
the internal scanning machinery, so these are no longer required.

0.6. Change History 1131


The Pyramid Web Framework, Version 1.9.4

Documentation

• Exception view documentation was added to the Hooks narrative chapter.

• A new narrative chapter entitled Internationalization and Localization was added.

• The ”Environment Variables and ini File Settings” chapter was changed: documentation about the
default_locale_name setting was added.

• A new API chapter for the repoze.bfg.i18n module was added.

• Documentation for the new translationdir and localenegotiator ZCML directives


were added.

• A section was added to the Templates chapter entitled ”Nicer Exceptions in Templates” describing
the result of setting debug_templates = true.

Paster Templates

• All paster templates now create a setup.cfg which includes commands related to nose testing
and Babel message catalog extraction/compilation.

• A default_locale_name = en setting was added to each existing paster template.

• A debug_templates = true setting was added to each existing paster template.

Licensing

• The Edgewall (BSD) license was added to the LICENSES.txt file, as some code in the repoze.
bfg.i18n derives from Babel source.

1.2 (2010-02-10)

• No changes from 1.2b6.

1132 Contents
The Pyramid Web Framework, Version 1.9.4

1.2b6 (2010-02-06)

Backwards Incompatibilities

• Remove magical feature of repoze.bfg.url.model_url which prepended a fully-expanded


urldispatch route URL before a the model’s path if it was noticed that the request had matched a
route. This feature was ill-conceived, and didn’t work in all scenarios.

Bug Fixes

• More correct conversion of provided renderer values to resource specification values (internal).

1.2b5 (2010-02-04)

Bug Fixes

• 1.2b4 introduced a bug whereby views added via a route configuration that named a view callable
and also a view_attr became broken. Symptom: MyViewClass is not callable or the
__call__ of a class was being called instead of the method named via view_attr.

• Fix a bug whereby a renderer argument to the @bfg_view decorator that provided a package-
relative template filename might not have been resolved properly. Symptom: inappropriate
Missing template resource errors.

1.2b4 (2010-02-03)

Documentation

• Update GAE tutorial to use Chameleon instead of Jinja2 (now that it’s possible).

Bug Fixes

• Ensure that secure flag for AuthTktAuthenticationPolicy constructor does what it’s documented
to do (merge Daniel Holth’s fancy-cookies-2 branch).

0.6. Change History 1133


The Pyramid Web Framework, Version 1.9.4

Features

• Add path and http_only options to AuthTktAuthenticationPolicy constructor (merge Daniel


Holth’s fancy-cookies-2 branch).

Backwards Incompatibilities

• Remove view_header, view_accept, view_xhr, view_path_info,


view_request_method, view_request_param, and view_containment predi-
cate arguments from the Configurator.add_route argument list. These arguments were
speculative. If you need the features exposed by these arguments, add a view associated with a
route using the route_name argument to the add_view method instead.

• Remove view_header, view_accept, view_xhr, view_path_info,


view_request_method, view_request_param, and view_containment predi-
cate arguments from the route ZCML directive attribute set. These attributes were speculative.
If you need the features exposed by these attributes, add a view associated with a route using the
route_name attribute of the view ZCML directive instead.

Dependencies

• Remove dependency on sourcecodegen (not depended upon by Chameleon 1.1.1+).

1.2b3 (2010-01-24)

Bug Fixes

• When ”hybrid mode” (both traversal and urldispatch) is in use, default to finding route-related views
even if a non-route-related view registration has been made with a more specific context. The default
used to be to find views with a more specific context first. Use the new use_global_views
argument to the route definition to get back the older behavior.

1134 Contents
The Pyramid Web Framework, Version 1.9.4

Features

• Add use_global_views argument to add_route method of Configurator. When this argu-


ment is true, views registered for no route will be found if no more specific view related to the route
is found.

• Add use_global_views attribute to ZCML <route> directive (see above).

Internal

• When registering a view, register the view adapter with the ”requires” interfaces as
(request_type, context_type) rather than (context_type, request_type).
This provides for saner lookup, because the registration will always be made with a specific re-
quest interface, but registration may not be made with a specific context interface. In general, when
creating multiadapters, you want to order the requires interfaces so that the elements which are more
likely to be registered using specific interfaces are ordered before those which are less likely.

1.2b2 (2010-01-21)

Bug Fixes

• When the Configurator is passed an instance of zope.component.registry.


Components as a registry constructor argument, fix the instance up to have the attributes
we expect of an instance of repoze.bfg.registry.Registry when setup_registry
is called. This makes it possible to use the global Zope component registry as a BFG application
registry.

• When WebOb 0.9.7.1 was used, a deprecation warning was issued for the class attribute named
charset within repoze.bfg.request.Request. BFG now requires WebOb >= 0.9.7, and
code was added so that this deprecation warning has disappeared.

• Fix a view lookup ordering bug whereby a view with a larger number of predicates registered first
(literally first, not ”earlier”) for a triad would lose during view lookup to one registered with fewer.

• Make sure views with exactly N custom predicates are always called before views with exactly N
non-custom predicates given all else is equal in the view configuration.

0.6. Change History 1135


The Pyramid Web Framework, Version 1.9.4

Documentation

• Change renderings of ZCML directive documentation.

• Add a narrative documentation chapter: ”Using the Zope Component Architecture in repoze.bfg”.

Dependencies

• Require WebOb >= 0.9.7

1.2b1 (2010-01-18)

Bug Fixes

• In bfg_routesalchemy, bfg_alchemy paster templates and the bfgwiki2 tutorial, clean


up the SQLAlchemy connection by registering a repoze.tm.after_end callback instead of
relying on a __del__ method of a Cleanup class added to the WSGI environment. The __del__
strategy was fragile and caused problems in the wild. Thanks to Daniel Holth for testing.

Features

• Read logging configuration from PasteDeploy config file loggers section (and related) when
paster bfgshell is invoked.

Documentation

• Major rework in preparation for book publication.

1.2a11 (2010-01-05)

Bug Fixes

• Make paster bfgshell and paster create -t bfg_xxx work on Jython (fix minor
incompatibility with treatment of __doc__ at the class level).

• Updated dependency on WebOb to require a version which supports features now used in tests.

1136 Contents
The Pyramid Web Framework, Version 1.9.4

Features

• Jython compatibility (at least when repoze.bfg.jinja2 is used as the templating engine; Chameleon
does not work under Jython).
• Show the derived abspath of template resource specifications in the traceback when a renderer tem-
plate cannot be found.
• Show the original traceback when a Chameleon template cannot be rendered due to a platform in-
compatibility.

1.2a10 (2010-01-04)

Features

• The Configurator.add_view method now accepts an argument named context. This is an


alias for the older argument named for_; it is preferred over for_, but for_ will continue to be
supported ”forever”.
• The view ZCML directive now accepts an attribute named context. This is an alias for the older
attribute named for; it is preferred over for, but for will continue to be supported ”forever”.
• The Configurator.add_route method now accepts an argument named view_context.
This is an alias for the older argument named view_for; it is preferred over view_for, but
view_for will continue to be supported ”forever”.
• The route ZCML directive now accepts an attribute named view_context. This is an alias
for the older attribute named view_for; it is preferred over view_for, but view_for will
continue to be supported ”forever”.

Documentation and Paster Templates

• LaTeX rendering tweaks.


• All uses of the Configurator.add_view method that used its for_ argument now use the
context argument instead.
• All uses of the Configurator.add_route method that used its view_for argument now
use the view_context argument instead.
• All uses of the view ZCML directive that used its for attribute now use the context attribute
instead.
• All uses of the route ZCML directive that used its view_for attribute now use the
view_context attribute instead.
• Add a (minimal) tutorial dealing with use of repoze.catalog in a repoze.bfg application.

0.6. Change History 1137


The Pyramid Web Framework, Version 1.9.4

Documentation Licensing

• Loosen the documentation licensing to allow derivative works: it is now offered under the Creative
Commons Attribution-Noncommercial-Share Alike 3.0 United States License. This is only a docu-
mentation licensing change; the repoze.bfg software continues to be offered under the Repoze
Public License at http://repoze.org/license.html (BSD-like).

1.2a9 (2009-12-27)

Documentation Licensing

• The documentation (the result of make <html|latex|htmlhelp> within the docs direc-
tory) in this release is now offered under the Creative Commons Attribution-Noncommercial-No
Derivative Works 3.0 United States License as described by http://creativecommons.org/licenses/
by-nc-nd/3.0/us/ . This is only a licensing change for the documentation; the repoze.bfg soft-
ware continues to be offered under the Repoze Public License at http://repoze.org/license.html
(BSD-like).

Documentation

• Added manual index entries to generated index.

• Document the previously existing (but non-API) repoze.bfg.configuration.


Configurator.setup_registry method as an official API of a Configurator.

• Fix syntax errors in various documentation code blocks.

• Created new top-level documentation section: ”ZCML Directives”. This section contains detailed
ZCML directive information, some of which was removed from various narrative chapters.

• The LaTeX rendering of the documentation has been improved.

• Added a ”Fore-Matter” section with author, copyright, and licensing information.

1138 Contents
The Pyramid Web Framework, Version 1.9.4

1.2a8 (2009-12-24)

Features

• Add a **kw arg to the Configurator.add_settings API.

• Add hook_zca and unhook_zca methods to the Configurator API.

• The repoze.bfg.testing.setUp method now returns a Configurator instance which


can be used to do further configuration during unit tests.

Bug Fixes

• The json renderer failed to set the response content type to application/json. It now does,
by setting request.response_content_type unless this attribute is already set.

• The string renderer failed to set the response content type to text/plain. It now does, by
setting request.response_content_type unless this attribute is already set.

Documentation

• General documentation improvements by using better Sphinx roles such as ”class”, ”func”, ”meth”,
and so on. This means that there are many more hyperlinks pointing to API documentation for API
definitions in all narrative, tutorial, and API documentation elements.

• Added a description of imperative configuration in various places which only described ZCML con-
figuration.

• A syntactical refreshing of various tutorials.

• Added the repoze.bfg.authentication, repoze.bfg.authorization, and


repoze.bfg.interfaces modules to API documentation.

Deprecations

• The repoze.bfg.testing.registerRoutesMapper API (added in an early 1.2 alpha)


was deprecated. Its import now generates a deprecation warning.

0.6. Change History 1139


The Pyramid Web Framework, Version 1.9.4

1.2a7 (2009-12-20)

Features

• Add four new testing-related APIs to the repoze.bfg.configuration.Configurator


class: testing_securitypolicy, testing_models, testing_add_subscriber,
and testing_add_template. These were added in order to provide more
direct access to the functionality of the repoze.bfg.testing APIs named
registerDummySecurityPolicy, registerModels, registerEventListener,
and registerTemplateRenderer when a configurator is used. The testing APIs named
are nominally deprecated (although they will likely remain around ”forever”, as they are in heavy
use in the wild).

• Add a new API to the repoze.bfg.configuration.Configurator class:


add_settings. This API can be used to add ”settings” (information returned within via
the repoze.bfg.settings.get_settings API) after the configurator has been initially
set up. This is most useful for testing purposes.

• Add a custom_predicates argument to the Configurator add_view method,


the bfg_view decorator and the attribute list of the ZCML view directive. If
custom_predicates is specified, it must be a sequence of predicate callables (a predi-
cate callable accepts two arguments: context and request and returns True or False). The
associated view callable will only be invoked if all custom predicates return True. Use one or
more custom predicates when no existing predefined predicate is useful. Predefined and custom
predicates can be mixed freely.

• Add a custom_predicates argument to the Configurator add_route and the attribute


list of the ZCML route directive. If custom_predicates is specified, it must be a sequence
of predicate callables (a predicate callable accepts two arguments: context and request and
returns True or False). The associated route will match will only be invoked if all custom pred-
icates return True, else route matching continues. Note that the value context will always be
None when passed to a custom route predicate. Use one or more custom predicates when no exist-
ing predefined predicate is useful. Predefined and custom predicates can be mixed freely.

Internal

• Remove the repoze.bfg.testing.registerTraverser function. This function was


never an API.

1140 Contents
The Pyramid Web Framework, Version 1.9.4

Documenation

• Doc-deprecated most helper functions in the repoze.bfg.testing module. These helper func-
tions likely won’t be removed any time soon, nor will they generate a warning any time soon, due to
their heavy use in the wild, but equivalent behavior exists in methods of a Configurator.

1.2a6 (2009-12-18)

Features

• The Configurator object now has two new methods: begin and end. The begin method is
meant to be called before any ”configuration” begins (e.g. before add_view, et. al are called). The
end method is meant to be called after all ”configuration” is complete.

Previously, before there was imperative configuration at all (1.1 and prior), configuration begin and
end was invariably implied by the process of loading a ZCML file. When a ZCML load happened, the
threadlocal data structure containing the request and registry was modified before the load, and torn
down after the load, making sure that all framework code that needed get_current_registry
for the duration of the ZCML load was satisfied.

Some API methods called during imperative configuration, (such as Configurator.add_view


when a renderer is involved) end up for historical reasons calling get_current_registry.
However, in 1.2a5 and below, the Configurator supplied no functionality that allowed people to make
sure that get_current_registry returned the registry implied by the configurator being used.
begin now serves this purpose. Inversely, end pops the thread local stack, undoing the actions of
begin.

We make this boundary explicit to reduce the potential for confusion when the configurator is used
in different circumstances (e.g. in unit tests and app code vs. just in initial app setup).

Existing code written for 1.2a1-1.2a5 which does not call begin or end continues to work in the
same manner it did before. It is however suggested that this code be changed to call begin and end
to reduce the potential for confusion in the future.

• All paster templates which generate an application skeleton now make use of the new begin and
end methods of the Configurator they use in their respective copies of run.py and tests.py.

0.6. Change History 1141


The Pyramid Web Framework, Version 1.9.4

Documentation

• All documentation that makes use of a Configurator object to do application setup and test
setup now makes use of the new begin and end methods of the configurator.

Bug Fixes

• When a repoze.bfg.exceptions.NotFound or repoze.bfg.exceptions.


Forbidden class (as opposed to instance) was raised as an exception within a root factory
(or route root factory), the exception would not be caught properly by the repoze.bfg. Router
and it would propagate to up the call stack, as opposed to rendering the not found view or the
forbidden view as would have been expected.

• When Chameleon page or text templates used as renderers were added imperatively (via
Configurator.add_view or some derivative), they too-eagerly attempted to look up the
reload_templates setting via get_settings, meaning they were always registered in non-
auto-reload-mode (the default). Each now waits until its respective template attribute is accessed
to look up the value.

• When a route with the same name as a previously registered route was added, the old route was
not removed from the mapper’s routelist. Symptom: the old registered route would be used (and
possibly matched) during route lookup when it should not have had a chance to ever be used.

1.2a5 (2009-12-10)

Features

• When the repoze.bfg.exceptions.NotFound or repoze.bfg.exceptions.


Forbidden error is raised from within a custom root factory or the factory of a route, the
appropriate response is now sent to the requesting user agent (the result of the notfound view or
the forbidden view, respectively). When these errors are raised from within a root factory, the
context passed to the notfound or forbidden view will be None. Also, the request will not be
decorated with view_name, subpath, context, etc. as would normally be the case if traversal
had been allowed to take place.

1142 Contents
The Pyramid Web Framework, Version 1.9.4

Internals

• The exception class representing the error raised by various methods of a Configurator is now
importable as repoze.bfg.exceptions.ConfigurationError.

Documentation

• General documentation freshening which takes imperative configuration into account in more places
and uses glossary references more liberally.

• Remove explanation of changing the request type in a new request event subscriber, as other predi-
cates are now usually an easier way to get this done.

• Added ”Thread Locals” narrative chapter to documentation, and added a API chapter documenting
the repoze.bfg.threadlocals module.

• Added a ”Special Exceptions” section to the ”Views” narrative documentation chapter explaining the
effect of raising repoze.bfg.exceptions.NotFound and repoze.bfg.exceptions.
Forbidden from within view code.

Dependencies

• A new dependency on the twill package was added to the setup.py tests_require ar-
gument (Twill will only be downloaded when repoze.bfg setup.py test or setup.py
nosetests is invoked).

1.2a4 (2009-12-07)

Features

• repoze.bfg.testing.DummyModel now accepts a new constructor keyword argument:


__provides__. If this constructor argument is provided, it should be an interface or a tuple
of interfaces. The resulting model will then provide these interfaces (they will be attached to the
constructed model via zope.interface.alsoProvides).

0.6. Change History 1143


The Pyramid Web Framework, Version 1.9.4

Bug Fixes

• Operation on GAE was broken, presumably because the repoze.bfg.configuration


module began to attempt to import the repoze.bfg.chameleon_zpt and repoze.bfg.
chameleon_text modules, and these cannot be used on non-CPython platforms. It now toler-
ates startup time import failures for these modules, and only raise an import error when a template
from one of these packages is actually used.

1.2a3 (2009-12-02)

Bug Fixes

• The repoze.bfg.url.route_url function inappropriately passed along _query and/or


_anchor arguments to the mapper.generate function, resulting in blowups.

• When two views were registered with differering for interfaces or classes, and the for of first view
registered was a superclass of the second, the repoze.bfg view machinery would incorrectly
associate the two views with the same ”multiview”. Multiviews are meant to be collections of views
that have exactly the same for/request/viewname values, without taking inheritance into account.
Symptom: wrong view callable found even when you had correctly specified a for_ interface/class
during view configuration for one or both view configurations.

Backwards Incompatibilities

• The repoze.bfg.templating module has been removed; it had been deprecated in 1.1 and
never actually had any APIs in it.

1.2a2 (2009-11-29)

Bug Fixes

• The long description of this package (as shown on PyPI) was not valid reStructuredText, and so was
not renderable.

• Trying to use an HTTP method name string such as GET as a request_type predicate
argument caused a startup time failure when it was encountered in imperative configuration
or in a decorator (symptom: Type Error: Required specification must be a
specification). This now works again, although request_method is now the preferred
predicate argument for associating a view configuration with an HTTP request method.

1144 Contents
The Pyramid Web Framework, Version 1.9.4

Documentation

• Fixed ”Startup” narrative documentation chapter; it was explaining ”the old way” an application
constructor worked.

1.2a1 (2009-11-28)

Features

• An imperative configuration mode.

A repoze.bfg application can now begin its life as a single Python file. Later, the application
might evolve into a set of Python files in a package. Even later, it might start making use of other
configuration features, such as ZCML. But neither the use of a package nor the use of non-imperative
configuration is required to create a simple repoze.bfg application any longer.

Imperative configuration makes repoze.bfg competetive with ”microframeworks” such as Bottle


and Tornado. repoze.bfg has a good deal of functionality that most microframeworks lack, so
this is hopefully a ”best of both worlds” feature.

The simplest possible repoze.bfg application is now:

from webob import Response


from wsgiref import simple_server
from repoze.bfg.configuration import Configurator

def hello_world(request):
return Response('Hello world!')

if __name__ == '__main__':
config = Configurator()
config.add_view(hello_world)
app = config.make_wsgi_app()
simple_server.make_server('', 8080, app).serve_forever()

• A new class now exists: repoze.bfg.configuration.Configurator. This class forms


the basis for sharing machinery between ”imperatively” configured applications and traditional
declaratively-configured applications.

0.6. Change History 1145


The Pyramid Web Framework, Version 1.9.4

• The repoze.bfg.testing.setUp function now accepts three extra optional keyword argu-
ments: registry, request and hook_zca.

If the registry argument is not None, the argument will be treated as the registry
that is set as the ”current registry” (it will be returned by repoze.bfg.threadlocal.
get_current_registry) for the duration of the test. If the registry argument is None
(the default), a new registry is created and used for the duration of the test.

The value of the request argument is used as the ”current request” (it will be returned by
repoze.bfg.threadlocal.get_current_request) for the duration of the test; it de-
faults to None.

If hook_zca is True (the default), the zope.component.getSiteManager func-


tion will be hooked with a function that returns the value of registry (or the default-
created registry if registry is None) instead of the registry returned by zope.
component.getGlobalSiteManager, causing the Zope Component Architecture API
(getSiteManager, getAdapter, getUtility, and so on) to use the testing registry instead
of the global ZCA registry.

• The repoze.bfg.testing.tearDown function now accepts an unhook_zca argument. If


this argument is True (the default), zope.component.getSiteManager.reset() will
be called. This will cause the result of the zope.component.getSiteManager function to
be the global ZCA registry (the result of zope.component.getGlobalSiteManager) once
again.

• The run.py module in various repoze.bfg paster templates now use a repoze.bfg.
configuration.Configurator class instead of the (now-legacy) repoze.bfg.router.
make_app function to produce a WSGI application.

Documentation

• The documentation now uses the ”request-only” view calling convention in most examples (as
opposed to the context, request convention). This is a documentation-only change; the
context, request convention is also supported and documented, and will be ”forever”.

• repoze.bfg.configuration API documentation has been added.

• A narrative documentation chapter entitled ”Creating Your First repoze.bfg Application”


has been added. This chapter details usage of the new repoze.bfg.configuration.
Configurator class, and demonstrates a simplified ”imperative-mode” configuration; doing
repoze.bfg application configuration imperatively was previously much more difficult.

1146 Contents
The Pyramid Web Framework, Version 1.9.4

• A narrative documentation chapter entitled ”Configuration, Decorations and Code Scanning” ex-
plaining ZCML- vs. imperative- vs. decorator-based configuration equivalence.

• The ”ZCML Hooks” chapter has been renamed to ”Hooks”; it documents how to override hooks
now via imperative configuration and ZCML.

• The explanation about how to supply an alternate ”response factory” has been removed from the
”Hooks” chapter. This feature may be removed in a later release (it still works now, it’s just not
documented).

• Add a section entitled ”Test Set Up and Tear Down” to the unittesting chapter.

Bug Fixes

• The ACL authorization policy debugging output when debug_authorization console debug-
ging output was turned on wasn’t as clear as it could have been when a view execution was denied
due to an authorization failure resulting from the set of principals passed never having matched any
ACE in any ACL in the lineage. Now in this case, we report <default deny> as the ACE value
and either the root ACL or <No ACL found on any object in model lineage> if no
ACL was found.

• When two views were registered with the same accept argument, but were otherwise registered
with the same arguments, if a request entered the application which had an Accept header that
accepted either of the media types defined by the set of views registered with predicates that oth-
erwise matched, a more or less ”random” one view would ”win”. Now, we try harder to use the
view callable associated with the view configuration that has the most specific accept argument.
Thanks to Alberto Valverde for an initial patch.

Internals

• The routes mapper is no longer a root factory wrapper. It is now consulted directly by the router.

• The repoze.bfg.registry.make_registry callable has been removed.

• The repoze.bfg.view.map_view callable has been removed.

• The repoze.bfg.view.owrap_view callable has been removed.

• The repoze.bfg.view.predicate_wrap callable has been removed.

0.6. Change History 1147


The Pyramid Web Framework, Version 1.9.4

• The repoze.bfg.view.secure_view callable has been removed.

• The repoze.bfg.view.authdebug_view callable has been removed.

• The repoze.bfg.view.renderer_from_name callable has been removed. Use repoze.


bfg.configuration.Configurator.renderer_from_name instead (still not an API,
however).

• The repoze.bfg.view.derive_view callable has been removed. Use repoze.bfg.


configuration.Configurator.derive_view instead (still not an API, however).

• The repoze.bfg.settings.get_options callable has been removed. Its job has been sub-
sumed by the repoze.bfg.settings.Settings class constructor.

• The repoze.bfg.view.requestonly function has been moved to repoze.bfg.


configuration.requestonly.

• The repoze.bfg.view.rendered_response function has been moved to repoze.bfg.


configuration.rendered_response.

• The repoze.bfg.view.decorate_view function has been moved to repoze.bfg.


configuration.decorate_view.

• The repoze.bfg.view.MultiView class has been moved to repoze.bfg.


configuration.MultiView.

• The repoze.bfg.zcml.Uncacheable class has been removed.

• The repoze.bfg.resource.resource_spec function has been removed.

• All ZCML directives which deal with attributes which are paths now use the path method of the
ZCML context to resolve a relative name to an absolute one (imperative configuration requirement).

• The repoze.bfg.scripting.get_root API now uses a ’real’ WebOb request rather than a
FakeRequest when it sets up the request as a threadlocal.

• The repoze.bfg.traversal.traverse API now uses a ’real’ WebOb request rather than a
FakeRequest when it calls the traverser.

• The repoze.bfg.request.FakeRequest class has been removed.

1148 Contents
The Pyramid Web Framework, Version 1.9.4

• Most uses of the ZCA threadlocal API (the getSiteManager, getUtility, getAdapter,
getMultiAdapter threadlocal API) have been removed from the core. Instead, when a threadlo-
cal is necessary, the core uses the repoze.bfg.threadlocal.get_current_registry
API to obtain the registry.
• The internal ILogger utility named repoze.bfg.debug is now just an IDebugLogger unnamed
utility. A named utility with the old name is registered for b/w compat.
• The repoze.bfg.interfaces.ITemplateRendererFactory interface was removed; it
has become unused.
• Instead of depending on the martian package to do code scanning, we now just use our own
scanning routines.
• We now no longer have a dependency on repoze.zcml package; instead, the repoze.bfg
package includes implementations of the adapter, subscriber and utility directives.
• Relating to the following functions:
repoze.bfg.view.render_view
repoze.bfg.view.render_view_to_iterable
repoze.bfg.view.render_view_to_response
repoze.bfg.view.append_slash_notfound_view
repoze.bfg.view.default_notfound_view
repoze.bfg.view.default_forbidden_view
repoze.bfg.configuration.rendered_response
repoze.bfg.security.has_permission
repoze.bfg.security.authenticated_userid
repoze.bfg.security.effective_principals
repoze.bfg.security.view_execution_permitted
repoze.bfg.security.remember
repoze.bfg.security.forget
repoze.bfg.url.route_url
repoze.bfg.url.model_url
repoze.bfg.url.static_url
repoze.bfg.traversal.virtual_root
Each of these functions now expects to be called with a request object that has a registry attribute
which represents the current repoze.bfg registry. They fall back to obtaining the registry from
the threadlocal API.

0.6. Change History 1149


The Pyramid Web Framework, Version 1.9.4

Backwards Incompatibilites

• Unit tests which use zope.testing.cleanup.cleanUp for the purpose of isolating tests from
one another may now begin to fail due to lack of isolation between tests.
Here’s why: In repoze.bfg 1.1 and prior, the registry returned by repoze.bfg.threadlocal.
get_current_registry when no other registry had been pushed on to the threadlo-
cal stack was the zope.component.globalregistry.base global registry (aka the re-
sult of zope.component.getGlobalSiteManager()). In repoze.bfg 1.2+, however,
the registry returned in this situation is the new module-scope repoze.bfg.registry.
global_registry object. The zope.testing.cleanup.cleanUp function clears the
zope.component.globalregistry.base global registry unconditionally. However, it
does not know about the repoze.bfg.registry.global_registry object, so it does not
clear it.
If you use the zope.testing.cleanup.cleanUp function in the setUp of test cases in your
unit test suite instead of using the (more correct as of 1.1) repoze.bfg.testing.setUp, you
will need to replace all calls to zope.testing.cleanup.cleanUp with a call to repoze.
bfg.testing.setUp.
If replacing all calls to zope.testing.cleanup.cleanUp with a call to repoze.bfg.
testing.setUp is infeasible, you can put this bit of code somewhere that is executed exactly
once (not for each test in a test suite; in the ‘‘ __init__.py‘‘ of your package or your package’s
tests subpackage would be a reasonable place):

import zope.testing.cleanup
from repoze.bfg.testing import setUp
zope.testing.cleanup.addCleanUp(setUp)

• When there is no ”current registry” in the repoze.bfg.threadlocal.manager threadlocal


data structure (this is the case when there is no ”current request” or we’re not in the midst of a r.
b.testing.setUp-bounded unit test), the .get method of the manager returns a data structure
containing a global registry. In previous releases, this function returned the global Zope ”base” reg-
istry: the result of zope.component.getGlobalSiteManager, which is an instance of the
zope.component.registry.Component class. In this release, however, the global registry
returns a globally importable instance of the repoze.bfg.registry.Registry class. This
registry instance can always be imported as repoze.bfg.registry.global_registry.
Effectively, this means that when you call repoze.bfg.threadlocal.
get_current_registry when no request or setUp bounded unit test is in effect, you will
always get back the global registry that lives in repoze.bfg.registry.global_registry.
It also means that repoze.bfg APIs that call get_current_registry will use this registry.
This change was made because repoze.bfg now expects the registry it uses to have a slightly
different API than a bare instance of zope.component.registry.Components.

1150 Contents
The Pyramid Web Framework, Version 1.9.4

• View registration no longer registers a repoze.bfg.interfaces.IViewPermission


adapter (it is no longer checked by the framework; since 1.1, views have been responsible for pro-
viding their own security).

• The repoze.bfg.router.make_app callable no longer accepts the


authentication_policy nor the authorization_policy arguments. This fea-
ture was deprecated in version 1.0 and has been removed.

• Obscure: the machinery which configured views with a request_type and a route_name
would ignore the request interface implied by route_name registering a view only for the interface
implied by request_type. In the unlikely event that you were trying to use these two features
together, the symptom would have been that views that named a request_type but which were
also associated with routes were not found when the route matched. Now if a view is configured
with both a request_type and a route_name, an error is raised.

• The route ZCML directive now no longer accepts the request_type or


view_request_type attributes. These attributes didn’t actually work in any useful way
(see entry above this one).

• Because the repoze.bfg package now includes implementations of the adapter,


subscriber and utility ZCML directives, it is now an error to have <include
package="repoze.zcml" file="meta.zcml"/> in the ZCML of a repoze.bfg
application. A ZCML conflict error will be raised if your ZCML does so. This shouldn’t be an issue
for ”normal” installations; it has always been the responsibility of the repoze.bfg.includes
ZCML to include this file in the past; it now just doesn’t.

• The repoze.bfg.testing.zcml_configure API was removed. Use the


Configurator.load_zcml API instead.

Deprecations

• The repoze.bfg.router.make_app function is now nominally deprecated. Its import and


usage does not throw a warning, nor will it probably ever disappear. However, using a repoze.
bfg.configuration.Configurator class is now the preferred way to generate a WSGI
application.

Note that make_app calls zope.component.getSiteManager.sethook( repoze.


bfg.threadlocal.get_current_registry) on the caller’s behalf, hooking ZCA global
API lookups, for backwards compatibility purposes. If you disuse make_app, your calling
code will need to perform this call itself, at least if your application uses the ZCA global API
(getSiteManager, getAdapter, etc).

0.6. Change History 1151


The Pyramid Web Framework, Version 1.9.4

Dependencies

• A dependency on the martian package has been removed (its functionality is replaced internally).

• A dependency on the repoze.zcml package has been removed (its functionality is replaced in-
ternally).

1.1.1 (2009-11-21)

Bug Fixes

• ”Hybrid mode” applications (applications which explicitly used traversal after url dispatch via
<route> paths containing the *traverse element) were broken in 1.1-final and all 1.1 alpha
and beta releases. Views registered without a route_name route shadowed views registered with
a route_name inappropriately.

1.1 (2009-11-15)

Internals

• Remove dead IRouteRequirement interface from repoze.bfg.zcml module.

Documentation

• Improve the ”Extending an Existing Application” narrative chapter.

• Add more sections to the ”Defending Design” chapter.

1.1b4 (2009-11-12)

Bug Fixes

• Use alsoProvides in the urldispatch module to attach an interface to the request rather than
directlyProvides to avoid disturbing interfaces set in a NewRequest event handler.

1152 Contents
The Pyramid Web Framework, Version 1.9.4

Documentation

• Move 1.0.1 and previous changelog to HISTORY.txt.

• Add examples to repoze.bfg.url.model_url docstring.

• Add ”Defending BFG Design” chapter to frontpage docs.

Templates

• Remove ez_setup.py and its import from all paster templates, samples, and tutorials for
distribute compatibility. The documentation already explains how to install virtualenv (which
will include some setuptools package), so these files, imports and usages were superfluous.

Deprecations

• The options kw arg to the repoze.bfg.router.make_app function is deprecated. In its


place is the keyword argument settings. The options keyword continues to work, and a depre-
cation warning is not emitted when it is detected. However, the paster templates, code samples, and
documentation now make reference to settings rather than options. This change/deprecation
was mainly made for purposes of clarity and symmetry with the get_settings() API and di-
cussions of ”settings” in various places in the docs: we want to use the same name to refer to the
same thing everywhere.

1.1b3 (2009-11-06)

Features

• repoze.bfg.testing.registerRoutesMapper testing facility added. This testing func-


tion registers a routes ”mapper” object in the registry, for tests which require its presence. This
function is documented in the repoze.bfg.testing API documentation.

Bug Fixes

• Compound statements that used an assignment entered into in an interactive IPython session invoked
via paster bfgshell no longer fail to mutate the shell namespace correctly. For example, this
set of statements used to fail:

0.6. Change History 1153


The Pyramid Web Framework, Version 1.9.4

In [2]: def bar(x): return x


...:
In [3]: list(bar(x) for x in 'abc')
Out[3]: NameError: 'bar'

In this release, the bar function is found and the correct output is now sent to the console. Thanks
to Daniel Holth for the patch.

• The bfgshell command did not function properly; it was still expecting to be able to call the root
factory with a bare environ rather than a request object.

Backwards Incompatibilities

• The repoze.bfg.scripting.get_root function now expects a request object as its sec-


ond argument rather than an environ.

1.1b2 (2009-11-02)

Bug Fixes

• Prevent PyPI installation failure due to easy_install trying way too hard to guess the best ver-
sion of Paste. When easy_install pulls from PyPI it reads links off various pages to determine
”more up to date” versions. It incorrectly picks up a link for an ancient version of a package named
”Paste-Deploy-0.1” (note the dash) when trying to find the ”Paste” distribution and somehow be-
lieves it’s the latest version of ”Paste”. It also somehow ”helpfully” decides to check out a version of
this package from SVN. We pin the Paste dependency version to a version greater than 1.7 to work
around this easy_install bug.

Documentation

• Fix ”Hybrid” narrative chapter: stop claiming that <view> statements that mention a route_name
need to come afer (in XML order) the <route> statement which creates the route. This hasn’t been
true since 1.1a1.

• ”What’s New in repoze.bfg 1.1” document added to narrative documentation.

1154 Contents
The Pyramid Web Framework, Version 1.9.4

Features

• Add a new event type: repoze.bfg.events.AfterTraversal. Events of this type will


be sent after traversal is completed, but before any view code is invoked. Like repoze.bfg.
events.NewRequest, This event will have a single attribute: request representing the cur-
rent request. Unlike the request attribute of repoze.bfg.events.NewRequest however, dur-
ing an AfterTraversal event, the request object will possess attributes set by the traverser, most no-
tably context, which will be the context used when a view is found and invoked. The interface
repoze.bfg.events.IAfterTraversal can be used to subscribe to the event. For exam-
ple:

<subscriber for="repoze.bfg.interfaces.IAfterTraversal"
handler="my.app.handle_after_traverse"/>

Like any framework event, a subscriber function should expect one parameter: event.

Dependencies

• Rather than depending on chameleon.core and chameleon.zpt distributions individually,


depend on Malthe’s repackaged Chameleon distribution (which includes both chameleon.
core and chameleon.zpt).

1.1b1 (2009-11-01)

Bug Fixes

• The routes root factory called route factories and the default route factory with an environ rather
than a request. One of the symptoms of this bug: applications generated using the bfg_zodb
paster template in 1.1a9 did not work properly.

• Reinstate renderer alias for view_renderer in the <route> ZCML directive (in-the-wild
1.1a bw compat).

• bfg_routesalchemy paster template: change <route> declarations: rename renderer at-


tribute to view_renderer.

0.6. Change History 1155


The Pyramid Web Framework, Version 1.9.4

• Header values returned by the authtktauthenticationpolicy remember and forget


methods would be of type unicode. This violated the WSGI spec, causing a TypeError to be
raised when these headers were used under mod_wsgi.

• If a BFG app that had a route matching the root URL was mounted under a path in mod-
wsgi, ala WSGIScriptAlias /myapp /Users/chrism/projects/modwsgi/env/
bfg.wsgi, the home route (a route with the path of '/' or '') would not match when the path
/myapp was visited (only when the path /myapp/ was visited). This is now fixed: if the urldis-
patch root factory notes that the PATH_INFO is empty, it converts it to a single slash before trying
to do matching.

Documentation

• In <route> declarations in tutorial ZCML, rename renderer attribute to view_renderer


(fwd compat).

• Fix various tutorials broken by 1.1a9 <route> directive changes.

Internal

• Deal with a potential circref in the traversal module.

1.1a9 (2009-10-31)

Bug Fixes

• An incorrect ZCML conflict would be encountered when the request_param predicate attribute
was used on the ZCML view directive if any two otherwise same-predicated views had the combi-
nation of a predicate value with an = sign and one without (e.g. a vs. a=123).

1156 Contents
The Pyramid Web Framework, Version 1.9.4

Features

• In previous versions of BFG, the ”root factory” (the get_root callable passed to make_app or
a function pointed to by the factory attribute of a route) was called with a ”bare” WSGI envi-
ronment. In this version, and going forward, it will be called with a request object. The request
object passed to the factory implements dictionary-like methods in such a way that existing root
factory code which expects to be passed an environ will continue to work.

• The __call__ of a plugin ”traverser” implementation (registered as an adapter for ITraverser


or ITraverserFactory) will now receive a request as the single argument to its __call__
method. In previous versions it was passed a WSGI environ object. The request object passed
to the factory implements dictionary-like methods in such a way that existing traverser code which
expects to be passed an environ will continue to work.

• The ZCML route directive’s attributes xhr, request_method, path_info,


request_param, header and accept are now route predicates rather than view predi-
cates. If one or more of these predicates is specified in the route configuration, all of the predicates
must return true for the route to match a request. If one or more of the route predicates associated
with a route returns False when checked during a request, the route match fails, and the next
match in the routelist is tried. This differs from the previous behavior, where no route predicates
existed and all predicates were considered view predicates, because in that scenario, the next route
was not tried.

Documentation

• Various changes were made to narrative and API documentation supporting the change from passing
a request rather than an environ to root factories and traversers.

Internal

• The request implements dictionary-like methods that mutate and query the WSGI environ. This
is only for the purpose of backwards compatibility with root factories which expect an environ
rather than a request.

• The repoze.bfg.request.create_route_request_factory function, which


returned a request factory was removed in favor of a repoze.bfg.request.
route_request_interface function, which returns an interface.

0.6. Change History 1157


The Pyramid Web Framework, Version 1.9.4

• The repoze.bfg.request.Request class, which is a subclass of webob.Request now


defines its own __setattr__, __getattr__ and __delattr__ methods, which override
the default WebOb behavior. The default WebOb behavior stores attributes of the request in
self.environ['webob.adhoc_attrs'], and retrieves them from that dictionary during
a __getattr__. This behavior was undesirable for speed and ”expectation” reasons. Now at-
tributes of the request are stored in request.__dict__ (as you otherwise might expect from
an object that did not override these methods).

• The router no longer calls repoze.bfg.traversal._traverse and does its work ”inline”
(speed).

• Reverse the order in which the router calls the request factory and the root factory. The request
factory is now called first; the resulting request is passed to the root factory.

• The repoze.bfg.request.request_factory function has been removed. Its functional-


ity is no longer required.

• The ”routes root factory” that wraps the default root factory when there are routes men-
tioned in the configuration now attaches an interface to the request via zope.interface.
directlyProvides. This replaces logic in the (now-gone) repoze.bfg.request.
request_factory function.

• The route and view ZCML directives now register an interface as a named utility (re-
trieved from repoze.bfg.request.route_request_interface) rather than a re-
quest factory (the previous return value of the now-missing repoze.bfg.request.
create_route_request_factory.

• The repoze.bfg.functional module was renamed to repoze.bfg.compat.

Backwards Incompatibilities

• Explicitly revert the feature introduced in 1.1a8: where the name root is available as an attribute
of the request before a NewRequest event is emitted. This makes some potential future features
impossible, or at least awkward (such as grouping traversal and view lookup into a single adapter
lookup).

• The containment, attr and renderer attributes of the route ZCML directive were re-
moved.

1158 Contents
The Pyramid Web Framework, Version 1.9.4

1.1a8 (2009-10-27)

Features

• Add path_info view configuration predicate.

• paster bfgshell now supports IPython if it’s available for import. Thanks to Daniel Holth for
the initial patch.

• Add repoze.bfg.testing.registerSettings API, which is documented in the ”re-


poze.bfg.testing” API chapter. This allows for registration of ”settings” values obtained via
repoze.bfg.settings.get_settings() for use in unit tests.

• The name root is available as an attribute of the request slightly earlier now (before a NewRequest
event is emitted). root is the result of the application ”root factory”.

• Added max_age parameter to authtktauthenticationpolicy ZCML directive. If this


value is set, it must be an integer representing the number of seconds which the auth tkt cookie will
survive. Mainly, its existence allows the auth_tkt cookie to survive across browser sessions.

Bug Fixes

• Fix bug encountered during ”scan” (when <scan ..> directive is used in ZCML) introduced
in 1.1a7. Symptom: AttributeError: object has no attribute __provides__
raised at startup time.

• The reissue_time argument to the authtktauthenticationpolicy ZCML directive


now actually works. When it is set to an integer value, an authticket set-cookie header is appended to
the response whenever a request requires authentication and ’now’ minus the authticket’s timestamp
is greater than reissue_time seconds.

Documentation

• Add a chapter titled ”Request and Response” to the narrative documentation, content cribbed from
the WebOb documentation.

• Call out predicate attributes of ZCML directive within ”Views” chapter.

• Fix route_url documentation (_query argument documented as query and _anchor argument
documented as anchor).

0.6. Change History 1159


The Pyramid Web Framework, Version 1.9.4

Backwards Incompatibilities

• The authtkt authentication policy remember method now no longer honors token or
userdata keyword arguments.

Internal

• Change how bfg_view decorator works when used as a class method decorator. In 1.1a7,
the‘‘scan‘‘directive actually tried to grope every class in scanned package at startup time, calling
dir against each found class, and subsequently invoking getattr against each thing found by
dir to see if it was a method. This led to some strange symptoms (e.g. AttributeError:
object has no attribute __provides__), and was generally just a bad idea. Now, in-
stead of groping classes for methods at startup time, we just cause the bfg_view decorator itself to
populate the method’s class’ __dict__ when it is used as a method decorator. This also requires
a nasty _getframe thing but it’s slightly less nasty than the startup time groping behavior. This is
essentially a reversion back to 1.1a6 ”grokking” behavior plus some special magic for using the
bfg_view decorator as method decorator inside the bfg_view class itself.

• The router now checks for a global_response_headers attribute of the request object before
returning a response. If this value exists, it is presumed to be a sequence of two-tuples, representing
a set of headers to append to the ’normal’ response headers. This feature is internal, rather than
exposed externally, because it’s unclear whether it will stay around in the long term. It was added
to support the reissue_time feature of the authtkt authentication policy.

• The interface ITraverserFactory is now just an alias for ITraverser.

1.1a7 (2009-10-18)

Features

• More than one @bfg_view decorator may now be stacked on top of any number of others. Each
invocation of the decorator registers a single view configuration. For instance, the following combi-
nation of decorators and a function will register two view configurations for the same view callable:

from repoze.bfg.view import bfg_view

@bfg_view(name='edit')
@bfg_view(name='change')
def edit(context, request):
pass

1160 Contents
The Pyramid Web Framework, Version 1.9.4

This makes it possible to associate more than one view configuration with a single callable without
requiring any ZCML.

• The @bfg_view decorator can now be used against a class method:

from webob import Response


from repoze.bfg.view import bfg_view

class MyView(object):
def __init__(self, context, request):
self.context = context
self.request = request

@bfg_view(name='hello')
def amethod(self):
return Response('hello from %s!' % self.context)

When the bfg_view decorator is used against a class method, a view is registered for the class (it’s
a ”class view” where the ”attr” happens to be the name of the method it is attached to), so the class
it’s defined within must have a suitable constructor: one that accepts context, request or just
request.

Documentation

• Added Changing the Traverser and Changing How :mod:`repoze.bfg.url.


model_url` Generates a URL to the ”Hooks” narrative chapter of the docs.

Internal

• Remove ez_setup.py and imports of it within setup.py. In the new world, and as per vir-
tualenv setup instructions, people will already have either setuptools or distribute.

0.6. Change History 1161


The Pyramid Web Framework, Version 1.9.4

1.1a6 (2009-10-15)

Features

• Add xhr, accept, and header view configuration predicates to ZCML view declaration, ZCML
route declaration, and bfg_view decorator. See the Views narrative documentation chapter for
more information about these predicates.
• Add setUp and tearDown functions to the repoze.bfg.testing module. Using setUp in
a test setup and tearDown in a test teardown is now the recommended way to do component registry
setup and teardown. Previously, it was recommended that a single function named repoze.bfg.
testing.cleanUp be called in both the test setup and tear down. repoze.bfg.testing.
cleanUp still exists (and will exist ”forever” due to its widespread use); it is now just an alias for
repoze.bfg.testing.setUp and is nominally deprecated.
• The BFG component registry is now available in view and event subscriber code as an attribute of
the request ie. request.registry. This fact is currently undocumented except for this note,
because BFG developers never need to interact with the registry directly anywhere else.
• The BFG component registry now inherits from dict, meaning that it can optionally be used as
a simple dictionary. Component registrations performed against it via e.g. registerUtility,
registerAdapter, and similar API methods are kept in a completely separate namespace than
its dict members, so using the its component API methods won’t effect the keys and values in the
dictionary namespace. Likewise, though the component registry ”happens to be” a dictionary, use
of mutating dictionary methods such as __setitem__ will have no influence on any component
registrations made against it. In other words, the registry object you obtain via e.g. repoze.bfg.
threadlocal.get_current_registry or request.registry happens to be both a
component registry and a dictionary, but using its component-registry API won’t impact data added
to it via its dictionary API and vice versa. This is a forward compatibility move based on the goals
of ”marco”.
• Expose and document repoze.bfg.testing.zcml_configure API. This function popu-
lates a component registry from a ZCML file for testing purposes. It is documented in the ”Unit and
Integration Testing” chapter.

Documentation

• Virtual hosting narrative docs chapter updated with info about mod_wsgi.
• Point all index URLs at the literal 1.1 index (this alpha cycle may go on a while).
• Various tutorial test modules updated to use repoze.bfg.testing.setUp and repoze.
bfg.testing.tearDown methods in order to encourage this as best practice going forward.
• Added ”Creating Integration Tests” section to unit testing narrative documentation chapter. As a
result, the name of the unittesting chapter is now ”Unit and Integration Testing”.

1162 Contents
The Pyramid Web Framework, Version 1.9.4

Backwards Incompatibilities

• Importing getSiteManager and get_registry from repoze.bfg.registry is no


longer supported. These imports were deprecated in repoze.bfg 1.0. Import of getSiteManager
should be done as from zope.component import getSiteManager. Import
of get_registry should be done as from repoze.bfg.threadlocal import
get_current_registry. This was done to prevent a circular import dependency.

• Code bases which alternately invoke both zope.testing.cleanup.cleanUp and repoze.


bfg.testing.cleanUp (treating them equivalently, using them interchangeably) in the
setUp/tearDown of unit tests will begin to experience test failures due to lack of test isola-
tion. The ”right” mechanism is repoze.bfg.testing.cleanUp (or the combination of
repoze.bfg.testing.setUp and repoze.bfg.testing.tearDown). but a good
number of legacy codebases will use zope.testing.cleanup.cleanUp instead. We support
zope.testing.cleanup.cleanUp but not in combination with repoze.bfg.testing.
cleanUp in the same codebase. You should use one or the other test cleanup function in a single
codebase, but not both.

Internal

• Created new repoze.bfg.configuration module which assumes responsibilities previously


held by the repoze.bfg.registry and repoze.bfg.router modules (avoid a circular
import dependency).

• The result of the zope.component.getSiteManager function in unit tests set up


with repoze.bfg.testing.cleanUp or repoze.bfg.testing.setUp will be an in-
stance of repoze.bfg.registry.Registry instead of the global zope.component.
globalregistry.base registry. This also means that the threadlocal ZCA API functions such
as getAdapter and getUtility as well as internal BFG machinery (such as model_url and
route_url) will consult this registry within unit tests. This is a forward compatibility move based
on the goals of ”marco”.

• Removed repoze.bfg.testing.addCleanUp function and associated module-scope glob-


als. This was never an API.

0.6. Change History 1163


The Pyramid Web Framework, Version 1.9.4

1.1a5 (2009-10-10)

Documentation

• Change ”Traversal + ZODB” and ”URL Dispatch + SQLAlchemy” Wiki tutorials to make use of
the new-to-1.1 ”renderer” feature (return dictionaries from all views).

• Add tests to the ”URL Dispatch + SQLAlchemy” tutorial after the ”view” step.

• Added a diagram of model graph traversal to the ”Traversal” narrative chapter of the documentation.

• An exceptions API chapter was added, documenting the new repoze.bfg.exceptions


module.

• Describe ”request-only” view calling conventions inside the urldispatch narrative chapter, where it’s
most helpful.

• Add a diagram which explains the operation of the BFG router to the ”Router” narrative chapter.

Features

• Add a new repoze.bfg.testing API: registerRoute, for registering routes to satisfy calls
to e.g. repoze.bfg.url.route_url in unit tests.

• The notfound and forbidden ZCML directives now accept the following addtional attributes:
attr, renderer, and wrapper. These have the same meaning as they do in the context of a
ZCML view directive.

• For behavior like Django’s APPEND_SLASH=True, use the repoze.bfg.view.


append_slash_notfound_view view as the Not Found view in your application. When this
view is the Not Found view (indicating that no view was found), and any routes have been defined
in the configuration of your application, if the value of PATH_INFO does not already end in a
slash, and if the value of PATH_INFO plus a slash matches any route’s path, do an HTTP redirect
to the slash-appended PATH_INFO. Note that this will lose POST data information (turning it into
a GET), so you shouldn’t rely on this to redirect POST requests.

• Speed up repoze.bfg.location.lineage slightly.

• Speed up repoze.bfg.encode.urlencode (nee’ repoze.bfg.url.urlencode)


slightly.

1164 Contents
The Pyramid Web Framework, Version 1.9.4

• Speed up repoze.bfg.traversal.model_path.

• Speed up repoze.bfg.traversal.model_path_tuple slightly.

• Speed up repoze.bfg.traversal.traverse slightly.

• Speed up repoze.bfg.url.model_url slightly.

• Speed up repoze.bfg.url.route_url slightly.

• Sped up repoze.bfg.traversal.ModelGraphTraverser:__call__ slightly.

• Minor speedup of repoze.bfg.router.Router.__call__.

• New repoze.bfg.exceptions module was created to house exceptions that were previously
sprinkled through various modules.

Internal

• Move repoze.bfg.traversal._url_quote into repoze.bfg.encode as


url_quote.

Deprecations

• The import of repoze.bfg.view.NotFound is deprecated in favor of repoze.bfg.


exceptions.NotFound. The old location still functions, but emits a deprecation warning.

• The import of repoze.bfg.security.Unauthorized is deprecated in favor of repoze.


bfg.exceptions.Forbidden. The old location still functions but emits a deprecation warn-
ing. The rename from Unauthorized to Forbidden brings parity to the name of the exception
and the system view it invokes when raised.

0.6. Change History 1165


The Pyramid Web Framework, Version 1.9.4

Backwards Incompatibilities

• We previously had a Unicode-aware wrapper for the urllib.urlencode function named


repoze.bfg.url.urlencode which delegated to the stdlib function, but which marshalled
all unicode values to utf-8 strings before calling the stdlib version. A newer replacement now lives
in repoze.bfg.encode The replacement does not delegate to the stdlib.

The replacement diverges from the stdlib implementation and the previous repoze.bfg.url
url implementation inasmuch as its doseq argument is now a decoy: it always behaves in the
doseq=True way (which is the only sane behavior) for speed purposes.

The old import location (repoze.bfg.url.urlencode) still functions and has not been dep-
recated.

• In 0.8a7, the return value expected from an object implementing ITraverserFactory was
changed from a sequence of values to a dictionary containing the keys context, view_name,
subpath, traversed, virtual_root, virtual_root_path, and root. Until now, old-
style traversers which returned a sequence have continued to work but have generated a deprecation
warning. In this release, traversers which return a sequence instead of a dictionary will no longer
work.

1.1a4 (2009-09-23)

Bug Fixes

• On 64-bit Linux systems, views that were members of a multiview (orderings of views with predi-
cates) were not evaluated in the proper order. Symptom: in a configuration that had two views with
the same name but one with a request_method=POST predicate and one without, the one with-
out the predicate would be called unconditionally (even if the request was a POST request). Thanks
much to Sebastien Douche for providing the buildbots that pointed this out.

Documentation

• Added a tutorial which explains how to use repoze.session (ZODB-based sessions) in a


ZODB-based repoze.bfg app.

• Added a tutorial which explains how to add ZEO to a ZODB-based repoze.bfg application.

• Added a tutorial which explains how to run a repoze.bfg application under mod_wsgi. See
”Running a repoze.bfg Application under mod_wsgi” in the tutorials section of the documentation.

1166 Contents
The Pyramid Web Framework, Version 1.9.4

Features

• Add a repoze.bfg.url.static_url API which is capable of generating URLs to static re-


sources defined by the <static> ZCML directive. See the ”Views” narrative chapter’s section
titled ”Generating Static Resource URLs” for more information.

• Add a string renderer. This renderer converts a non-Response return value of any view callble
into a string. It is documented in the ”Views” narrative chapter.

• Give the route ZCML directive the view_attr and view_renderer parameters (bring up to
speed with 1.1a3 features). These can also be spelled as attr and renderer.

Backwards Incompatibilities

• An object implementing the IRenderer interface (and ITemplateRenderer`, which


is a subclass of ``IRenderer) must now accept an extra system argument in its
__call__ method implementation. Values computed by the system (as opposed to by the view)
are passed by the system in the system parameter, which will always be a dictionary. Keys in the
dictionary include: view (the view object that returned the value), renderer_name (the tem-
plate name or simple name of the renderer), context (the context object passed to the view), and
request (the request object passed to the view). Previously only ITemplateRenderers received
system arguments as elements inside the main value dictionary.

Internal

• The way bfg_view declarations are scanned for has been modified. This should have no external
effects.

• Speed: do not register an ITraverserFactory in configure.zcml; instead rely on queryAdapter and a


manual default to ModelGraphTraverser.

• Speed: do not register an IContextURL in configure.zcml; instead rely on queryAdapter and a man-
ual default to TraversalContextURL.

• General speed microimprovements for helloworld benchmark: replace try/excepts with statements
which use ’in’ keyword.

0.6. Change History 1167


The Pyramid Web Framework, Version 1.9.4

1.1a3 (2009-09-16)

Documentation

• The ”Views” narrative chapter in the documentation has been updated extensively to discuss ”ren-
derers”.

Features

• A renderer attribute has been added to view configurations, replacing the previous (1.1a2) ver-
sion’s template attribute. A ”renderer” is an object which accepts the return value of a view and
converts it to a string. This includes, but is not limited to, templating systems.

• A new interface named IRenderer was added. The existing interface, ITemplateRenderer
now derives from this new interface. This interface is internal.

• A new interface named IRendererFactory was added. An existing interface named


ITemplateRendererFactory now derives from this interface. This interface is internal.

• The view attribute of the view ZCML directive is no longer required if the ZCML directive also
has a renderer attribute. This is useful when the renderer is a template renderer and no names
need be passed to the template at render time.

• A new zcml directive renderer has been added. It is documented in the ”Views” narrative chapter
of the documentation.

• A ZCML view directive (and the associated bfg_view decorator) can now accept a ”wrapper”
value. If a ”wrapper” value is supplied, it is the value of a separate view’s name attribute. When
a view with a wrapper attribute is rendered, the ”inner” view is first rendered normally. Its body
is then attached to the request as ”wrapped_body”, and then a wrapper view name is looked up
and rendered (using repoze.bfg.render_view_to_response), passed the request and the
context. The wrapper view is assumed to do something sensible with request.wrapped_body,
usually inserting its structure into some other rendered template. This feature makes it possible to
specify (potentially nested) ”owrap” relationships between views using only ZCML or decorators
(as opposed always using ZPT METAL and analogues to wrap view renderings in outer wrappers).

Dependencies

• When used under Python < 2.6, BFG now has an installation time dependency on the simplejson
package.

1168 Contents
The Pyramid Web Framework, Version 1.9.4

Deprecations

• The repoze.bfg.testing.registerDummyRenderer API has been deprecated in favor


of repoze.bfg.testing.registerTemplateRenderer. A deprecation warning is not
issued at import time for the former name; it will exist ”forever”; its existence has been removed
from the documentation, however.

• The repoze.bfg.templating.renderer_from_cache function has been moved to


repoze.bfg.renderer.template_renderer_factory. This was never an API, but
code in the wild was spotted that used it. A deprecation warning is issued at import time for the
former.

Backwards Incompatibilities

• The ITemplateRenderer interface has been changed. Previously its __call__ method
accepted **kw. It now accepts a single positional parameter named kw (REVISED: it ac-
cepts two positional parameters as of 1.1a4: value and system). This is mostly an internal
change, but it was exposed in APIs in one place: if you’ve used the repoze.bfg.testing.
registerDummyRenderer API in your tests with a custom ”renderer” argument with your own
renderer implementation, you will need to change that renderer implementation to accept kw instead
of **kw in its __call__ method (REVISED: make it accept value and system positional ar-
guments as of 1.1a4).

• The ITemplateRendererFactory interface has been changed. Previously its __call__


method accepted an auto_reload keyword parameter. Now its __call__ method accepts no
keyword parameters. Renderers are now themselves responsible for determining details of auto-
reload. This is purely an internal change. This interface was never external.

• The template_renderer ZCML directive introduced in 1.1a2 has been removed. It has been
replaced by the renderer directive.

• The previous release (1.1a2) added a view configuration attribute named template. In this release,
the attribute has been renamed to renderer. This signifies that the attribute is more generic: it
can now be not just a template name but any renderer name (ala json).

• In the previous release (1.1a2), the Chameleon text template renderer was used if the system didn’t
associate the template view configuration value with a filename with a ”known” extension. In
this release, you must use a renderer attribute which is a path that ends with a .txt extension
(e.g. templates/foo.txt) to use the Chameleon text renderer.

0.6. Change History 1169


The Pyramid Web Framework, Version 1.9.4

1.1a2 (2009-09-14)

Features

• A ZCML view directive (and the associated bfg_view decorator) can now accept an ”attr” value.
If an ”attr” value is supplied, it is considered a method named of the view object to be called when
the response is required. This is typically only good for views that are classes or instances (not so
useful for functions, as functions typically have no methods other than __call__).

• A ZCML view directive (and the associated bfg_view decorator) can now accept a ”template”
value. If a ”template” value is supplied, and the view callable returns a dictionary, the associated
template is rendered with the dictionary as keyword arguments. See the section named ”Views That
Have a template” in the ”Views” narrative documentation chapter for more information.

1.1a1 (2009-09-06)

Bug Fixes

• ”tests” module removed from the bfg_alchemy paster template; these tests didn’t work.

• Bugfix: the discriminator for the ZCML ”route” directive was incorrect. It was possible to reg-
ister two routes that collided without the system spitting out a ConfigurationConflictError at startup
time.

Features

• Feature addition: view predicates. These are exposed as the request_method,


request_param, and containment attributes of a ZCML view declaration, or the re-
spective arguments to a @bfg_view decorator. View predicates can be used to register a view
for a more precise set of environment parameters than was previously possible. For example,
you can register two views with the same name with different request_param attributes. If
the request.params dict contains ’foo’ (request_param=”foo”), one view might be called;
if it contains ’bar’ (request_param=”bar”), another view might be called. request_param
can also name a key/value pair ala foo=123. This will match only when the foo key is in the
request.params dict and it has the value ’123’. This particular example makes it possible to write
separate view functions for different form submissions. The other predicates, containment and
request_method work similarly. containment is a view predicate that will match only when
the context’s graph lineage has an object possessing a particular class or interface, for example.
request_method is a view predicate that will match when the HTTP REQUEST_METHOD
equals some string (eg. ’POST’).

1170 Contents
The Pyramid Web Framework, Version 1.9.4

• The @bfg_view decorator now accepts three additional arguments: request_method,


request_param, and containment. request_method is used when you’d like the
view to match only a request with a particular HTTP REQUEST_METHOD; a string naming
the REQUEST_METHOD can also be supplied as request_type for backwards compatibility.
request_param is used when you’d like a view to match only a request that contains a particular
request.params key (with or without a value). containment is used when you’d like to
match a request that has a context that has some class or interface in its graph lineage. These are
collectively known as ”view predicates”.
• The route ZCML directive now honors view_request_method, view_request_param
and view_containment attributes, which pass along these values to the associated view
if any is provided. Additionally, the request_type attribute can now be spelled as
view_request_type, and permission can be spelled as view_permission. Any at-
tribute which starts with view_ can now be spelled without the view_ prefix, so view_for can
be spelled as for now, etc. Both forms are documented in the urldispatch narraitve documentation
chapter.
• The request_param ZCML view directive attribute (and its bfg_view decorator cousin) can
now specify both a key and a value. For example, request_param="foo=123" means that the
foo key must have a value of 123 for the view to ”match”.
• Allow repoze.bfg.traversal.find_interface API to use a class object as the
argument to compare against the model passed in. This means you can now do
find_interface(model, SomeClass) and the first object which is found in the lineage
which has SomeClass as its class (or the first object found which has SomeClass as any of its
superclasses) will be returned.
• Added static ZCML directive which registers a route for a view that serves up files in a direc-
tory. See the ”Views” narrative documentation chapter’s ”Serving Static Resources Using a ZCML
Directive” section for more information.
• The repoze.bfg.view.static class now accepts a string as its first argument (”root_dir”)
that represents a package-relative name e.g. somepackage:foo/bar/static. This is now the
preferred mechanism for spelling package-relative static paths using this class. A package_name
keyword argument has been left around for backwards compatibility. If it is supplied, it will be
honored.
• The API repoze.bfg.testing.registerView now takes a permission argument. Use
this instead of using repoze.bfg.testing.registerViewPermission.
• The ordering of route declarations vs. the ordering of view declarations that use a ”route_name” in
ZCML no longer matters. Previously it had been impossible to use a route_name from a route that
had not yet been defined in ZCML (order-wise) within a ”view” declaration.
• The repoze.bfg router now catches both repoze.bfg.security.Unauthorized and
repoze.bfg.view.NotFound exceptions while rendering a view. When the router catches an
Unauthorized, it returns the registered forbidden view. When the router catches a NotFound,
it returns the registered notfound view.

0.6. Change History 1171


The Pyramid Web Framework, Version 1.9.4

Internal

• Change urldispatch internals: Route object is now constructed using a path, a name, and a factory
instead of a name, a matcher, a generator, and a factory.

• Move (non-API) default_view, default_forbidden_view, and default_notfound_view functions into


the repoze.bfg.view module (moved from repoze.bfg.router).

• Removed ViewPermissionFactory from repoze.bfg.security. View permission checking is


now done by registering and looking up an ISecuredView.

• The static ZCML directive now uses a custom root factory when constructing a route.

• The interface IRequestFactories was removed from the repoze.bfg.interfaces module. This
interface was never an API.

• The function named named_request_factories and the data structure named


DEFAULT_REQUEST_FACTORIES have been removed from the repoze.bfg.request
module. These were never APIs.

• The IViewPermissionFactory interface has been removed. This was never an API.

Documentation

• Request-only-convention examples in the ”Views” narrative documentation were broken.

• Fixed documentation bugs related to forget and remember in security API docs.

• Fixed documentation for repoze.bfg.view.static (in narrative Views chapter).

Deprecations

• The API repoze.bfg.testing.registerViewPermission has been deprecated.

1172 Contents
The Pyramid Web Framework, Version 1.9.4

Backwards Incompatibilities

• The interfaces IPOSTRequest, IGETRequest, IPUTRequest, IDELETERequest, and


IHEADRequest have been removed from the repoze.bfg.interfaces module. These were
not documented as APIs post-1.0. Instead of using one of these, use a request_method ZCML
attribute or request_method bfg_view decorator parameter containing an HTTP method name
(one of GET, POST, HEAD, PUT, DELETE) instead of one of these interfaces if you were using one
explicitly. Passing a string in the set (GET, HEAD, PUT, POST, DELETE) as a request_type
argument will work too. Rationale: instead of relying on interfaces attached to the request object,
BFG now uses a ”view predicate” to determine the request type.

• Views registered without the help of the ZCML view directive are now responsible for performing
their own authorization checking.

• The registry_manager backwards compatibility alias importable from ”repoze.bfg.registry”,


deprecated since repoze.bfg 0.9 has been removed. If you are tring to use the registry manager
within a debug script of your own, use a combination of the ”repoze.bfg.paster.get_app” and ”re-
poze.bfg.scripting.get_root” APIs instead.

• The INotFoundAppFactory interface has been removed; it has been deprecated since re-
poze.bfg 0.9. If you have something like the following in your configure.zcml:

<utility provides="repoze.bfg.interfaces.INotFoundAppFactory"
component="helloworld.factories.notfound_app_factory"/>

Replace it with something like:

<notfound
view="helloworld.views.notfound_view"/>

See ”Changing the Not Found View” in the ”Hooks” chapter of the documentation for more infor-
mation.

• The IUnauthorizedAppFactory interface has been removed; it has been deprecated since
repoze.bfg 0.9. If you have something like the following in your configure.zcml:

<utility provides="repoze.bfg.interfaces.IUnauthorizedAppFactory
,→"

component="helloworld.factories.unauthorized_app_
,→factory"/>

Replace it with something like:

0.6. Change History 1173


The Pyramid Web Framework, Version 1.9.4

<forbidden
view="helloworld.views.forbidden_view"/>

See ”Changing the Forbidden View” in the ”Hooks” chapter of the documentation for more infor-
mation.

• ISecurityPolicy-based security policies, deprecated since repoze.bfg 0.9, have been removed.
If you have something like this in your configure.zcml, it will no longer work:

<utility
provides="repoze.bfg.interfaces.ISecurityPolicy"
factory="repoze.bfg.security.
,→RemoteUserInheritingACLSecurityPolicy"

/>

If ZCML like the above exists in your application, you will receive an error at startup time. Instead
of the above, you’ll need something like:

<remoteuserauthenticationpolicy/>
<aclauthorizationpolicy/>

This is just an example. See the ”Security” chapter of the repoze.bfg documentation for more infor-
mation about configuring security policies.

• Custom ZCML directives which register an authentication or authorization policy (ala ”authtktau-
thenticationpolicy” or ”aclauthorizationpolicy”) should register the policy ”eagerly” in the ZCML
directive instead of from within a ZCML action. If an authentication or authorization policy is not
found in the component registry by the view machinery during deferred ZCML processing, view
security will not work as expected.

1.0.1 (2009-07-22)

• Added support for has_resource, resource_isdir, and resource_listdir to the re-


source ”OverrideProvider”; this fixes a bug with a symptom that a file could not be overridden in a
resource directory unless a file with the same name existed in the original directory being overridden.

• Fixed documentation bug showing invalid test for values from the matchdict: they are stored as
attributes of the Article, rather than subitems.

1174 Contents
The Pyramid Web Framework, Version 1.9.4

• Fixed documentation bug showing wrong environment key for the matchdict produced by the
matching route.

• Added a workaround for a bug in Python 2.6, 2.6.1, and 2.6.2 having to do with a recursion er-
ror in the mimetypes module when trying to serve static files from Paste’s FileApp: http://bugs.
python.org/issue5853. Symptom: File ”/usr/lib/python2.6/mimetypes.py”, line 244, in guess_type
return guess_type(url, strict) RuntimeError: maximum recursion depth exceeded. Thanks to Armin
Ronacher for identifying the symptom and pointing out a fix.

• Minor edits to tutorials for accuracy based on feedback.

• Declared Paste and PasteDeploy dependencies.

1.0 (2009-07-05)

• Retested and added some content to GAE tutorial.

• Edited ”Extending” narrative docs chapter.

• Added ”Deleting the Database” section to the ”Defining Models” chapter of the traversal wiki tuto-
rial.

• Spell checking of narratives and tutorials.

1.0b2 (2009-07-03)

• remoteuserauthenticationpolicy ZCML directive didn’t work without an


environ_key directive (didn’t match docs).

• Fix configure_zcml filespec check on Windows. Previously if an absolute filesystem path in-
cluding a drive letter was passed as filename (or as configure_zcml in the options dict) to
repoze.bfg.router.make_app, it would be treated as a package:resource_name specifica-
tion.

• Fix inaccuracies and import errors in bfgwiki (traversal+ZODB) and bfgwiki2 (urldispatch+SA)
tutorials.

• Use bfgsite index for all tutorial setup.cfg files.

• Full documentation grammar/style/spelling audit.

0.6. Change History 1175


The Pyramid Web Framework, Version 1.9.4

1.0b1 (2009-07-02)

Features

• Allow a Paste config file (configure_zcml) value or an environment variable


(BFG_CONFIGURE_ZCML) to name a ZCML file (optionally package-relative) that will be
used to bootstrap the application. Previously, the integrator could not influence which ZCML file
was used to do the boostrapping (only the original application developer could do so).

Documentation

• Added a ”Resources” chapter to the narrative documentation which explains how to override re-
sources within one package from another package.

• Added an ”Extending” chapter to the narrative documentation which explains how to extend or
modify an existing BFG application using another Python package and ZCML.

1.0a9 (2009-07-01)

Features

• Make it possible to pass strings in the form ”package_name:relative/path” to APIs like


render_template, render_template_to_response, and get_template. Some-
times the package in which a caller lives is a direct namespace package, so the module which is
returned is semi-useless for navigating from. In this way, the caller can control the horizontal and
vertical of where things get looked up from.

1.0a8 (2009-07-01)

Deprecations

• Deprecate the authentication_policy and authorization_policy argu-


ments to repoze.bfg.router.make_app. Instead, developers should use the var-
ious authentication policy ZCML directives (repozewho1authenticationpolicy,
remoteuserauthenticationpolicy and authtktauthenticationpolicy) and
the aclauthorizationpolicy‘ authorization policy directive as described in the changes to the
”Security” narrative documenation chapter and the wiki tutorials.

1176 Contents
The Pyramid Web Framework, Version 1.9.4

Features

• Add three new ZCML directives which configure authentication policies:


– repozewho1authenticationpolicy
– remoteuserauthenticationpolicy
– authtktauthenticationpolicy
• Add a new ZCML directive which configures an ACL authorization policy named
aclauthorizationpolicy.

Bug Fixes

• Bug fix: when a repoze.bfg.resource.PackageOverrides class was in-


stantiated, and the package it was overriding already had a __loader__ attribute, it
would fail at startup time, even if the __loader__ attribute was another PackageOver-
rides instance. We now replace any __loader__ that is also a PackageOverrides in-
stance. Symptom: ConfigurationExecutionError: <type 'exceptions.
TypeError'>: Package <module 'karl.views' from '/Users/chrism/
projects/osi/bfgenv/src/karl/karl/views/__init__.pyc'> already
has a __loader__ (probably a module in a zipped egg).

1.0a7 (2009-06-30)

Features

• Add a reload_resources configuration file setting (aka the BFG_RELOAD_RESOURCES en-


vironment variable). When this is set to true, the server never needs to be restarted when moving
files between directory resource overrides (esp. for templates currently).
• Add a reload_all configuration file setting (aka the BFG_RELOAD_ALL environment variable)
that implies both reload_resources and reload_templates.
• The static helper view class now uses a PackageURLParser in order to allow for the over-
riding of static resources (CSS / logo files, etc) using the resource ZCML directive. The
PackageURLParser class was added to a (new) static module in BFG; it is a subclass of
the StaticURLParser class in paste.urlparser.
• The repoze.bfg.templating.renderer_from_cache function now checks for the
reload_resources setting; if it’s true, it does not register a template renderer (it won’t use
the registry as a template renderer cache).

0.6. Change History 1177


The Pyramid Web Framework, Version 1.9.4

Documentation

• Add pkg_resources to the glossary.

• Update the ”Environment” docs to note the existence of reload_resources and reload_all.

• Updated the bfg_alchemy paster template to include two views: the view on the root shows a list
of links to records; the view on a record shows the details for that object.

Internal

• Use a colon instead of a tab as the separator between package name and relpath to form the ”spec”
when register a ITemplateRenderer.

• Register a repoze.bfg.resource.OverrideProvider as a pkg_resources provider only


for modules which are known to have overrides, instead of globally, when a <resource> directive is
used (performance).

1.0a6 (2009-06-29)

Bug Fixes

• Use caller_package function instead of caller_module function within templating to


avoid needing to name the caller module in resource overrides (actually match docs).

• Make it possible to override templates stored directly in a module with templates in a subdirectory
of the same module, stored directly within another module, or stored in a subdirectory of another
module (actually match docs).

1.0a5 (2009-06-28)

Features

• A new ZCML directive exists named ”resource”. This ZCML directive allows you to override
Chameleon templates within a package (both directories full of templates and individual template
files) with other templates in the same package or within another package. This allows you to ”fake
out” a view’s use of a template, causing it to retrieve a different template than the one actually
named by a relative path to a call like render_template_to_response('templates/
mytemplate.pt'). For example, you can override a template file by doing:

1178 Contents
The Pyramid Web Framework, Version 1.9.4

<resource
to_override="some.package:templates/mytemplate.pt"
override_with="another.package:othertemplates/anothertemplate.
,→pt"

/>

The string passed to ”to_override” and ”override_with” is named a ”specification”. The colon sep-
arator in a specification separates the package name from a package-relative directory name. The
colon and the following relative path are optional. If they are not specified, the override attempts to
resolve every lookup into a package from the directory of another package. For example:

<resource
to_override="some.package"
override_with="another.package"
/>

Individual subdirectories within a package can also be overridden:

<resource
to_override="some.package:templates/"
override_with="another.package:othertemplates/"
/>

If you wish to override a directory with another directory, you must make sure to attach the slash
to the end of both the to_override specification and the override_with specification. If
you fail to attach a slash to the end of a specification that points a directory, you will get unexpected
results. You cannot override a directory specification with a file specification, and vice versa (a
startup error will occur if you try).

You cannot override a resource with itself (a startup error will occur if you try).

Only individual package resources may be overridden. Overrides will not traverse through sub-
packages within an overridden package. This means that if you want to override resources for both
some.package:templates, and some.package.views:templates, you will need to
register two overrides.

The package name in a specification may start with a dot, meaning that the package is relative to the
package in which the ZCML file resides. For example:

0.6. Change History 1179


The Pyramid Web Framework, Version 1.9.4

<resource
to_override=".subpackage:templates/"
override_with="another.package:templates/"
/>

Overrides for the same to_overrides specification can be named multiple times within ZCML.
Each override_with path will be consulted in the order defined within ZCML, forming an
override search path.

Resource overrides can actually override resources other than templates. Any software
which uses the pkg_resources get_resource_filename, get_resource_stream or
get_resource_string APIs will obtain an overridden file when an override is used. However,
the only built-in facility which uses the pkg_resources API within BFG is the templating stuff,
so we only call out template overrides here.

• Use the pkg_resources API to locate template filenames instead of dead-reckoning using the
os.path module.

• The repoze.bfg.templating module now uses pkg_resources to locate and register


template files instead of using an absolute path name.

1.0a4 (2009-06-25)

Features

• Cause :segment matches in route paths to put a Unicode-decoded and URL-dequoted value in the
matchdict for the value matched. Previously a non-decoded non-URL-dequoted string was placed
in the matchdict as the value.

• Cause *remainder matches in route paths to put a tuple in the matchdict dictionary in order to
be able to present Unicode-decoded and URL-dequoted values for the traversal path. Previously a
non-decoded non-URL-dequoted string was placed in the matchdict as the value.

• Add optional max_age keyword value to the remember method of repoze.bfg.


authentication.AuthTktAuthenticationPolicy; if this value is passed to
remember, the generated cookie will have a corresponding Max-Age value.

1180 Contents
The Pyramid Web Framework, Version 1.9.4

Documentation

• Add information to the URL Dispatch narrative documentation about path pattern matching syntax.

Bug Fixes

• Make route_url URL-quote segment replacements during generation. Remainder segments are
not quoted.

1.0a3 (2009-06-24)

Implementation Changes

• repoze.bfg no longer relies on the Routes package to interpret URL paths. All known existing
path patterns will continue to work with the reimplemented logic, which lives in repoze.bfg.
urldispatch. <route> ZCML directives which use certain attributes (uncommon ones) may
not work (see ”Backwards Incompatibilities” below).

Bug Fixes

• model_url when passed a request that was generated as a result of a route match would fail in a
call to route.generate.

• BFG-on-GAE didn’t work due to a corner case bug in the fallback Python implementation of
threading.local (symptom: ”Initialization arguments are not supported”). Thanks to Michael
Bernstein for the bug report.

Documentation

• Added a ”corner case” explanation to the ”Hybrid Apps” chapter explaining what to do when ”the
wrong” view is matched.

• Use repoze.bfg.url.route_url API in tutorials rather than Routes url_for API.

0.6. Change History 1181


The Pyramid Web Framework, Version 1.9.4

Features

• Added the repoze.bfg.url.route_url API. This API allows you to generate URLs based
on <route> declarations. See the URL Dispatch narrative chapter and the ”repoze.bfg.url” module
API documentation for more information.

Backwards Incompatibilities

• As a result of disusing Routes, using the Routes url_for API inside a BFG application (as was
suggested by previous iterations of tutorials) will no longer work. Use the repoze.bfg.url.
route_url method instead.

• The following attributes on the <route> ZCML directive no longer work: encoding, static,
filter, condition_method, condition_subdomain, condition_function,
explicit, or subdomains. These were all Routes features.

• The <route> ZCML directive no longer supports the <requirement> subdirective. This was
a Routes feature.

1.0a2 (2009-06-23)

Bug Fixes

• The bfg_routesalchemy paster template app tests failed due to a mismatch between test and
view signatures.

Features

• Add a view_for attribute to the route ZCML directive. This attribute should refer to an interface
or a class (ala the for attribute of the view ZCML directive).

Documentation

• Conditional documentation in installation section (”how to install a Python interpreter”).

1182 Contents
The Pyramid Web Framework, Version 1.9.4

Backwards Incompatibilities

• The callback argument of the repoze.bfg.authentication au-


thentication policies named RepozeWho1AuthenticationPolicy,
RemoteUserAuthenticationPolicy, and AuthTktAuthenticationPolicy
now must accept two positional arguments: the orginal argument accepted by each (userid or
identity) plus a second argument, which will be the current request. Apologies, this is required to
service finding groups when there is no ”global” database connection.

1.0a1 (2009-06-22)

Features

• A new ZCML directive was added named notfound. This ZCML directive can be used to name
a view that should be invoked when the request can’t otherwise be resolved to a view callable. For
example:

<notfound
view="helloworld.views.notfound_view"/>

• A new ZCML directive was added named forbidden. This ZCML directive can be used to name
a view that should be invoked when a view callable for a request is found, but cannot be invoked due
to an authorization failure. For example:

<forbidden
view="helloworld.views.forbidden_view"/>

• Allow views to be optionally defined as callables that accept only a request object, instead of both
a context and a request (which still works, and always will). The following types work as views in
this style:

– functions that accept a single argument request, e.g.:

def aview(request):
pass

– new and old-style classes that have an __init__ method that accepts self, request,
e.g.:

0.6. Change History 1183


The Pyramid Web Framework, Version 1.9.4

def View(object):
__init__(self, request):
pass

– Arbitrary callables that have a __call__ method that accepts self, request, e.g.:

def AView(object):
def __call__(self, request):
pass
view = AView()

This likely should have been the calling convention all along, as the request has context as an
attribute already, and with views called as a result of URL dispatch, having the context in the argu-
ments is not very useful. C’est la vie.

• Cache the absolute path in the caller’s package globals within repoze.bfg.path to get rid of
repeated (expensive) calls to os.path.abspath.

• Add reissue_time and timeout parameters to repoze.bfg.authentication.


AuthTktAuthenticationPolicy constructor. If these are passed, cookies will be reset every
so often (cadged from the same change to repoze.who lately).

• The matchdict related to the matching of a Routes route is available on the request as the
matchdict attribute: request.matchdict. If no route matched, this attribute will be None.

• Make 404 responses slightly cheaper by showing environ["PATH_INFO"] on the notfound


result page rather than the fullly computed URL.

• Move LRU cache implementation into a separate package (repoze.lru).

• The concepts of traversal and URL dispatch have been unified. It is now possible to use the same
sort of factory as both a traversal ”root factory” and what used to be referred to as a urldispatch
”context factory”.

• When the root factory argument (as a first argument) passed to repoze.bfg.router.
make_app is None, a default root factory is used. This is in support of using routes as ”root
finders”; it supplants the idea that there is a default IRoutesContextFactory.

• The view‘ ZCML statement and the repoze.bfg.view.bfg_view decorator now accept an
extra argument: route_name. If a route_name is specified, it must match the name of a previ-
ously defined route statement. When it is specified, the view will only be called when that route
matches during a request.

1184 Contents
The Pyramid Web Framework, Version 1.9.4

• It is now possible to perfom traversal after a route has matched. Use the pattern *traverse in a
<route> path attribute within ZCML, and the path remainder which it matches will be used as
a traversal path.

• When any route defined matches, the WSGI environment will now contain a key bfg.routes.
route (the Route object which matched), and a key bfg.routes.matchdict (the result of
calling route.match).

Deprecations

• Utility registrations against repoze.bfg.interfaces.INotFoundView and repoze.


bfg.interfaces.IForbiddenView are now deprecated. Use the notfound and
forbidden ZCML directives instead (see the ”Hooks” chapter for more information). Such reg-
istrations will continue to work, but the notfound and forbidden directives do ”extra work” to ensure
that the callable named by the directive can be called by the router even if it’s a class or request-
argument-only view.

Removals

• The IRoutesContext, IRoutesContextFactory, and IContextNotFound interfaces


were removed from repoze.bfg.interfaces. These were never APIs.

• The repoze.bfg.urldispatch.RoutesContextNotFound, repoze.bfg.


urldispatch.RoutesModelTraverser and repoze.bfg.urldispatch.
RoutesContextURL classes were removed. These were also never APIs.

Backwards Incompatibilities

• Moved the repoze.bfg.push module, which implemented the pushpage decorator, into a
separate distribution, repoze.bfg.pushpage. Applications which used this decorator should
continue to work after adding that distribution to their installation requirements.

• Changing the default request factory via an IRequestFactory utility registration (as used to be doc-
umented in the ”Hooks” chapter’s ”Changing the request factory” section) is no longer supported.
The dance to manufacture a request is complicated as a result of unifying traversal and url dispatch,
making it highly unlikely for anyone to be able to override it properly. For those who just want
to decorate or modify a request, use a NewRequestEvent subscriber (see the Events chapter in the
documentation).

0.6. Change History 1185


The Pyramid Web Framework, Version 1.9.4

• The repoze.bfg.IRequestFactory interface was removed. See the bullet above for why.
• Routes ”context factories” (spelled as the factory argument to a route statement in ZCML) must now
expect the WSGI environ as a single argument rather than a set of keyword arguments. They can
obtain the match dictionary by asking for environ[’bfg.routes.matchdict’]. This is the same set of
keywords that used to be passed to urldispatch ”context factories” in BFG 0.9 and below.
• Using the @zope.component.adapter decorator on a bfg view function no longer works. Use
the @repoze.bfg.view.bfg_view decorator instead to mark a function (or a class) as a view.
• The name under which the matching route object is found in the environ was changed from bfg.
route to bfg.routes.route.
• Finding the root is now done before manufacturing a request object (and sending a new request event)
within the router (it used to be performed afterwards).
• Adding *path_info to a route no longer changes the PATH_INFO for a request that matches
using URL dispatch. This feature was only there to service the repoze.bfg.wsgi.wsgiapp2
decorator and it did it wrong; use *subpath instead now.
• The values of subpath, traversed, and virtual_root_path attached to the request object
are always now tuples instead of lists (performance).

Bug Fixes

• The bfg_alchemy Paster template named ”repoze.tm” in its pipeline rather than ”repoze.tm2”,
causing the startup to fail.
• Move BBB logic for registering an IAuthenticationPolicy/IForbiddenView/INotFoundView
based on older concepts from the router module’s make_app function into the repoze.
bfg.zcml.zcml_configure callable, to service compatibility with scripts that use
”zope.configuration.xmlconfig” (replace with repoze.bfg.zml.zcml_configure as nec-
essary to get BBB logic)

Documentation

• Add interface docs related to how to create authentication policies and authorization policies to the
”Security” narrative chapter.
• Added a (fairly sad) ”Combining Traversal and URL Dispatch” chapter to the narrative documenta-
tion. This explains the usage of *traverse and *subpath in routes URL patters.
• A ”router” chapter explaining the request/response lifecycle at a high level was added.
• Replaced all mentions and explanations of a routes ”context factory” with equivalent explanations
of a ”root factory” (context factories have been disused).
• Updated Routes bfgwiki2 tutorial to reflect the fact that context factories are now no longer used.

1186 Contents
The Pyramid Web Framework, Version 1.9.4

0.9.1 (2009-06-02)

Features

• Add API named repoze.bfg.settings.get_settings which retrieves a derivation of val-


ues passed as the options value of repoze.bfg.router.make_app. This API should be
preferred instead of using getUtility(ISettings). I added a new repoze.bfg.settings API
document as well.

Bug Fixes

• Restored missing entry point declaration for bfg_alchemy paster template, which was accidentally
removed in 0.9.

Documentation

• Fix a reference to wsgiapp in the wsgiapp2 API documentation within the repoze.bfg.
wsgi module.

API Removals

• The repoze.bfg.location.locate API was removed: it didn’t do enough to be very helpful


and had a misleading name.

0.9 (2009-06-01)

Bug Fixes

• It was not possible to register a custom IRoutesContextFactory for use as a default context
factory as documented in the ”Hooks” chapter.

0.6. Change History 1187


The Pyramid Web Framework, Version 1.9.4

Features

• The request_type argument of ZCML view declarations and bfg_view decorators can now
be one of the strings GET, POST, PUT, DELETE, or HEAD instead of a reference to the respective
interface type imported from repoze.bfg.interfaces.
• The route ZCML directive now accepts request_type as an alias for its
condition_method argument for symmetry with the view directive.
• The bfg_routesalchemy paster template now provides a unit test and actually uses the database
during a view rendering.

Removals

• Remove repoze.bfg.threadlocal.setManager. It was only used in unit tests.


• Remove repoze.bfg.wsgi.HTTPException, repoze.bfg.wsgi.NotFound, and
repoze.bfg.wsgi.Unauthorized. These classes were disused with the introduction of the
IUnauthorizedView and INotFoundView machinery.

Documentation

• Add description to narrative templating chapter about how to use Chameleon text templates.
• Changed Views narrative chapter to use method strings rather than interface types, and moved ad-
vanced interface type usage to Events narrative chapter.
• Added a Routes+SQLAlchemy wiki tutorial.

0.9a8 (2009-05-31)

Features

• It is now possible to register a custom repoze.bfg.interfaces.INotFoundView


for a given application. This feature replaces the repoze.bfg.interfaces.
INotFoundAppFactory feature previously described in the Hooks chapter. The INot-
FoundView will be called when the framework detects that a view lookup done as a result of a
request fails; it should accept a context object and a request object; it should return an IResponse
object (a webob response, basically). See the Hooks narrative chapter of the BFG docs for more
info.
• The error presented when a view invoked by the router returns a non-response object now includes
the view’s name for troubleshooting purposes.

1188 Contents
The Pyramid Web Framework, Version 1.9.4

Bug Fixes

• A ”new response” event is emitted for forbidden and notfound views.

Deprecations

• The repoze.bfg.interfaces.INotFoundAppFactory interface has been deprecated in


favor of using the new repoze.bfg.interfaces.INotFoundView mechanism.

Renames

• Renamed repoze.bfg.interfaces.IForbiddenResponseFactory to repoze.


bfg.interfaces.IForbiddenView.

0.9a7 (2009-05-30)

Features

• Remove ”context” argument from effective_principals and authenticated_userid


function APIs in repoze.bfg.security, effectively a doing reversion to 0.8 and before behav-
ior. Both functions now again accept only the request parameter.

0.9a6 (2009-05-29)

Documentation

• Changed ”BFG Wiki” tutorial to use AuthTktAuthenticationPolicy rather than repoze.who.

0.6. Change History 1189


The Pyramid Web Framework, Version 1.9.4

Features

• Add an AuthTktAuthenticationPolicy. This policy retrieves credentials from an auth_tkt cookie


managed by the application itself (instead of relying on an upstream data source for authentication
data). See the Security API chapter of the documentation for more info.

• Allow RemoteUserAuthenticationPolicy and RepozeWho1AuthenticationPolicy to accept various


constructor arguments. See the Security API chapter of the documentation for more info.

0.9a5 (2009-05-28)

Features

• Add a get_app API functions to the paster module. This obtains a WSGI application from a
config file given a config file name and a section name. See the repoze.bfg.paster API docs
for more information.

• Add a new module named scripting. It contains a get_root API function, which, provided a
Router instance, returns a traversal root object and a ”closer”. See the repoze.bfg.scripting
API docs for more info.

0.9a4 (2009-05-27)

Bug Fixes

• Try checking for an ”old style” security policy after we parse ZCML (thinko).

0.9a3 (2009-05-27)

Features

• Allow IAuthenticationPolicy and IAuthorizationPolicy to be overridden via ZCML registrations (do


ZCML parsing after registering these in router.py).

1190 Contents
The Pyramid Web Framework, Version 1.9.4

Documentation

• Added ”BFG Wiki” tutorial to documentation; it describes step-by-step how to create a traversal-
based ZODB application with authentication.

Deprecations

• Added deprecations for imports of ACLSecurityPolicy,


InheritingACLSecurityPolicy, RemoteUserACLSecurityPolicy,
RemoteUserInheritingACLSecurityPolicy, WhoACLSecurityPolicy, and
WhoInheritingACLSecurityPolicy from the repoze.bfg.security module; for
the meantime (for backwards compatibility purposes) these live in the repoze.bfg.secpols
module. Note however, that the entire concept of a ”security policy” is deprecated in BFG in
favor of separate authentication and authorization policies, so any use of a security policy will
generate additional deprecation warnings even if you do start using repoze.bfg.secpols.
repoze.bfg.secpols will disappear in a future release of repoze.bfg.

Deprecated Import Alias Removals

• Remove repoze.bfg.template module. All imports from this package have been
deprecated since 0.3.8. Instead, import get_template, render_template, and
render_template_to_response from the repoze.bfg.chameleon_zpt module.

• Remove backwards compatibility import alias for repoze.bfg.traversal.split_path


(deprecated since 0.6.5). This must now be imported as repoze.bfg.traversal.
traversal_path).

• Remove backwards compatibility import alias for repoze.bfg.urldispatch.


RoutesContext (deprecated since 0.6.5). This must now be imported as repoze.bfg.
urldispatch.DefaultRoutesContext.

• Removed backwards compatibility import aliases for repoze.bfg.router.get_options


and repoze.bfg.router.Settings (deprecated since 0.6.2). These both must now be im-
ported from repoze.bfg.settings.

• Removed backwards compatibility import alias for repoze.bfg.interfaces.


IRootPolicy (deprecated since 0.6.2). It must be imported as repoze.bfg.interfaces.
IRootFactory now.

0.6. Change History 1191


The Pyramid Web Framework, Version 1.9.4

• Removed backwards compatibility import alias for repoze.bfg.interfaces.


ITemplate (deprecated since 0.4.4). It must be imported as repoze.bfg.interfaces.
ITemplateRenderer now.

• Removed backwards compatibility import alias for repoze.bfg.interfaces.


ITemplateFactory (deprecated since 0.4.4). It must be imported as repoze.bfg.
interfaces.ITemplateRendererFactory now.

• Removed backwards compatibility import alias for repoze.bfg.chameleon_zpt.


ZPTTemplateFactory (deprecated since 0.4.4). This must be imported as repoze.
bfg.ZPTTemplateRenderer now.

0.9a2 (2009-05-27)

Features

• A paster command has been added named ”bfgshell”. This command can be used to get an interactive
prompt with your BFG root object in the global namespace. E.g.:

bin/paster bfgshell /path/to/myapp.ini myapp

See the Project chapter in the BFG documentation for more information.

Deprecations

• The name repoze.bfg.registry.registry_manager was never an API, but scripts in the


wild were using it to set up an environment for use under a debug shell. A backwards compatibility
shim has been added for this purpose, but the feature is deprecated.

1192 Contents
The Pyramid Web Framework, Version 1.9.4

0.9a1 (2009-5-27)

Features

• New API functions named forget and remember are available in the security module. The
forget function returns headers which will cause the currently authenticated user to be logged out
when set in a response. The remember function (when passed the proper arguments) will return
headers which will cause a principal to be ”logged in” when set in a response. See the Security API
chapter of the docs for more info.

• New keyword arguments to the repoze.bfg.router.make_app call have been added:


authentication_policy and authorization_policy. These should, respec-
tively, be an implementation of an authentication policy (an object implementing the
repoze.bfg.interfaces.IAuthenticationPolicy interface) and an implementa-
tion of an authorization policy (an object implementing repoze.bfg.interfaces.
IAuthorizationPolicy). Concrete implementations of authentication policies exist in
repoze.bfg.authentication. Concrete implementations of authorization policies exist in
repoze.bfg.authorization.

Both authentication_policy and authorization_policy default to None.

If authentication_policy is None, but authorization_policy is not None, then


authorization_policy is ignored (the ability to do authorization depends on authentication).

If the authentication_policy argument is not None, and the authorization_policy


argument is None, the authorization policy defaults to an authorization implementation that uses
ACLs (repoze.bfg.authorization.ACLAuthorizationPolicy).

We no longer encourage configuration of ”security policies” using ZCML, as previously we did for
ISecurityPolicy. This is because it’s not uncommon to need to configure settings for concrete
authorization or authentication policies using paste .ini parameters; the app entry point for your
application is the natural place to do this.

• Two new abstractions have been added in the way of adapters used by the system: an
IAuthorizationPolicy and an IAuthenticationPolicy. A combination of these (as
registered by the securitypolicy ZCML directive) take the place of the ISecurityPolicy
abstraction in previous releases of repoze.who. The API functions in repoze.who.security
(such as authentication_userid, effective_principals, has_permission, and
so on) have been changed to try to make use of these new adapters. If you’re using an older
ISecurityPolicy adapter, the system will still work, but it will print deprecation warnings
when such a policy is used.

0.6. Change History 1193


The Pyramid Web Framework, Version 1.9.4

• The way the (internal) IViewPermission utilities registered via ZCML are invoked has changed. They
are purely adapters now, returning a boolean result, rather than returning a callable. You shouldn’t
have been using these anyway. ;-)
• New concrete implementations of IAuthenticationPolicy have been added to the repoze.bfg.
authentication module: RepozeWho1AuthenticationPolicy which uses repoze.
who identity to retrieve authentication data from and RemoteUserAuthenticationPolicy,
which uses the REMOTE_USER value in the WSGI environment to retrieve authentication data.
• A new concrete implementation of IAuthorizationPolicy has been added to the repoze.bfg.
authorization module: ACLAuthorizationPolicy which uses ACL inheritance to do
authorization.
• It is now possible to register a custom repoze.bfg.interfaces.
IForbiddenResponseFactory for a given application. This feature replaces the repoze.
bfg.interfaces.IUnauthorizedAppFactory feature previously described in the
Hooks chapter. The IForbiddenResponseFactory will be called when the framework detects an
authorization failure; it should accept a context object and a request object; it should return an
IResponse object (a webob response, basically). Read the below point for more info and see the
Hooks narrative chapter of the BFG docs for more info.

Backwards Incompatibilities

• Custom NotFound and Forbidden (nee’ Unauthorized) WSGI applications (registered as a utility
for INotFoundAppFactory and IUnauthorizedAppFactory) could rely on an environment key named
message describing the circumstance of the response. This key has been renamed to repoze.
bfg.message (as per the WSGI spec, which requires environment extensions to contain dots).

Deprecations

• The repoze.bfg.interfaces.IUnauthorizedAppFactory interface


has been deprecated in favor of using the new repoze.bfg.interfaces.
IForbiddenResponseFactory mechanism.
• The view_execution_permitted API should now be imported from the repoze.bfg.
security module instead of the repoze.bfg.view module.
• The authenticated_userid and effective_principals APIs in repoze.bfg.
security used to only take a single argument (request). They now accept two arguments
(context and request). Calling them with a single argument is still supported but issues a
deprecation warning. (NOTE: this change was reverted in 0.9a7; meaning the 0.9 versions of these
functions again accept request only, just like 0.8 and before).
• Use of ”old-style” security policies (those base on ISecurityPolicy) is now deprecated. See the
”Security” chapter of the docs for info about activating an authorization policy and an authentication
poicy.

1194 Contents
The Pyramid Web Framework, Version 1.9.4

0.8.1 (2009-05-21)

Features

• Class objects may now be used as view callables (both via ZCML and via use of the bfg_view
decorator in Python 2.6 as a class decorator). The calling semantics when using a class as a view
callable is similar to that of using a class as a Zope ”browser view”: the class’ __init__ must
accept two positional parameters (conventionally named context, and request). The resulting
instance must be callable (it must have a __call__ method). When called, the instance should
return a response. For example:

from webob import Response

class MyView(object):
def __init__(self, context, request):
self.context = context
self.request = request

def __call__(self):
return Response('hello from %s!' % self.context)

See the "Views" chapter in the documentation and the


``repoze.bfg.view`` API documentation for more information.

• Removed the pickling of ZCML actions (the code that wrote configure.zcml.cache next to
configure.zcml files in projects). The code which managed writing and reading of the cache
file was a source of subtle bugs when users switched between imperative (e.g. @bfg_view) reg-
istrations and declarative registrations (e.g. the view directive in ZCML) on the same project. On
a moderately-sized project (535 ZCML actions and 15 ZCML files), executing actions read from
the pickle was saving us only about 200ms (2.5 sec vs 2.7 sec average). On very small projects (1
ZCML file and 4 actions), startup time was comparable, and sometimes even slower when reading
from the pickle, and both ways were so fast that it really just didn’t matter anyway.

0.8 (2009-05-18)

Features

• Added a traverse function to the repoze.bfg.traversal module. This function may be


used to retrieve certain values computed during path resolution. See the Traversal API chapter of
the documentation for more information about this function.

0.6. Change History 1195


The Pyramid Web Framework, Version 1.9.4

Deprecations

• Internal: ITraverser callables should now return a dictionary rather than a tuple. Up until 0.7.0,
all ITraversers were assumed to return a 3-tuple. In 0.7.1, ITraversers were assumed to return a
6-tuple. As (by evidence) it’s likely we’ll need to add further information to the return value of an
ITraverser callable, 0.8 assumes that an ITraverser return a dictionary with certain elements in it.
See the repoze.bfg.interfaces.ITraverser interface for the list of keys that should be
present in the dictionary. ITraversers which return tuples will still work, although a deprecation
warning will be issued.

Backwards Incompatibilities

• If your code used the ITraverser interface directly (not via an API function such as find_model)
via an adapter lookup, you’ll need to change your code to expect a dictionary rather than a 3- or
6-tuple if your code ever gets return values from the default ModelGraphTraverser or RoutesMod-
elTraverser adapters.

0.8a7 (2009-05-16)

Backwards Incompatibilities

• The RoutesMapper class in repoze.bfg.urldispatch has been removed, as well as its


documentation. It had been deprecated since 0.6.3. Code in repoze.bfg.urldispatch.
RoutesModelTraverser which catered to it has also been removed.

• The semantics of the route ZCML directive have been simplified. Previously, it was assumed that
to use a route, you wanted to map a route to an externally registered view. The new route directive
instead has a view attribute which is required, specifying the dotted path to a view callable. When
a route directive is processed, a view is registered using the name attribute of the route directive as
its name and the callable as its value. The view_name and provides attributes of the route
directive are therefore no longer used. Effectively, if you were previously using the route directive,
it means you must change a pair of ZCML directives that look like this:

1196 Contents
The Pyramid Web Framework, Version 1.9.4

<route
name="home"
path=""
view_name="login"
factory=".models.root.Root"
/>

<view
for=".models.root.Root"
name="login"
view=".views.login_view"
/>

To a ZCML directive that looks like this:

<route
name="home"
path=""
view=".views.login_view"
factory=".models.root.Root"
/>

In other words, to make old code work, remove the view directives that were only there to serve
the purpose of backing route directives, and move their view= attribute into the route directive
itself.

This change also necessitated that the name attribute of the route directive is now required. If
you were previously using route directives without a name attribute, you’ll need to add one (the
name is arbitrary, but must be unique among all route and view statements).

The provides attribute of the route directive has also been removed. This directive specified a
sequence of interface types that the generated context would be decorated with. Since route views
are always generated now for a single interface (repoze.bfg.IRoutesContext) as opposed
to being looked up arbitrarily, there is no need to decorate any context to ensure a view is found.

Documentation

• Added API docs for the repoze.bfg.testing methods registerAdapter,


registerUtiity, registerSubscriber, and cleanUp.

0.6. Change History 1197


The Pyramid Web Framework, Version 1.9.4

• Added glossary entry for ”root factory”.

• Noted existence of repoze.bfg.pagetemplate template bindings in ”Available Add On Tem-


plate System Bindings” in Templates chapter in narrative docs.

• Update ”Templates” narrative chapter in docs (expand to show a sample template and correct macro
example).

Features

• Courtesty Carlos de la Guardia, added an alchemy Paster template. This paster template sets up
a BFG project that uses SQAlchemy (with SQLite) and uses traversal to resolve URLs. (no Routes
areused). This template can be used via paster create -t bfg_alchemy.

• The Routes Route object used to resolve the match is now put into the environment as bfg.route
when URL dispatch is used.

• You can now change the default Routes ”context factory” globally. See the ”ZCML Hooks” chapter
of the documentation (in the ”Changing the Default Routes Context Factory” section).

0.8a6 (2009-05-11)

Features

• Added a routesalchemy Paster template. This paster template sets up a BFG project that uses
SQAlchemy (with SQLite) and uses Routes exclusively to resolve URLs (no traversal root factory is
used). This template can be used via paster create -t bfg_routesalchemy.

Documentation

• Added documentation to the URL Dispatch chapter about how to catch the root URL using a ZCML
route directive.

• Added documentation to the URL Dispatch chapter about how to perform a cleanup function at the
end of a request (e.g. close the SQL connection).

1198 Contents
The Pyramid Web Framework, Version 1.9.4

Bug Fixes

• In version 0.6.3, passing a get_root callback (a ”root factory”) to repoze.bfg.router.


make_app became optional if any route declaration was made in ZCML. The intent was to make
it possible to disuse traversal entirely, instead relying entirely on URL dispatch (Routes) to resolve
all contexts. However a compound set of bugs prevented usage of a Routes-based root view (a view
which responds to ”/”). One bug existed in repoze.bfg.urldispatch‘, another existed in Routes itself.

To resolve this issue, the urldispatch module was fixed, and a fork of the Routes trunk was put
into the ”dev” index named Routes-1.11dev-chrism-home. The source for the fork exists
at http://bitbucket.org/chrism/routes-home/ (broken link); its contents have been merged into the
Routes trunk (what will be Routes 1.11).

0.8a5 (2009-05-08)

Features

• Two new security policies were added: RemoteUserInheritingACLSecurityPolicy and WhoInher-


itingACLSecurityPolicy. These are security policies which take into account all ACLs defined in
the lineage of a context rather than stopping at the first ACL found in a lineage. See the ”Security”
chapter of the API documentation for more information.

• The API and narrative documentation dealing with security was changed to introduce the new ”in-
heriting” security policy variants.

• Added glossary entry for ”lineage”.

Deprecations

• The security policy previously named RepozeWhoIdentityACLSecurityPolicy now has


the slightly saner name of WhoACLSecurityPolicy. A deprecation warning is emitted when
this policy is imported under the ”old” name; usually this is due to its use in ZCML within your
application. If you’re getting this deprecation warning, change your ZCML to use the new name,
e.g. change:

0.6. Change History 1199


The Pyramid Web Framework, Version 1.9.4

<utility
provides="repoze.bfg.interfaces.ISecurityPolicy"
factory="repoze.bfg.security.
,→RepozeWhoIdentityACLSecurityPolicy"

/>

To:

<utility
provides="repoze.bfg.interfaces.ISecurityPolicy"
factory="repoze.bfg.security.WhoACLSecurityPolicy"
/>

0.8a4 (2009-05-04)

Features

• zope.testing is no longer a direct dependency, although our dependencies (such as zope.


interface, repoze.zcml, etc) still depend on it.

• Tested on Google App Engine. Added a tutorial to the documentation explaining how to deploy a
BFG app to GAE.

Backwards Incompatibilities

• Applications which rely on zope.testing.cleanup.cleanUp in unit tests can still use that
function indefinitely. However, for maximum forward compatibility, they should import cleanUp
from repoze.bfg.testing instead of from zope.testing.cleanup. The BFG paster
templates and docs have been changed to use this function instead of the zope.testing.
cleanup version.

0.8a3 (2009-05-03)

Features

• Don’t require a successful import of zope.testing at BFG application runtime. This allows us
to get rid of zope.testing on platforms like GAE which have file limits.

1200 Contents
The Pyramid Web Framework, Version 1.9.4

0.8a2 (2009-05-02)

Features

• We no longer include the configure.zcml of the chameleon.zpt package within the


configure.zcml of the ”repoze.bfg.includes” package. This has been a no-op for some time
now.

• The repoze.bfg.chameleon_zpt package no longer imports from chameleon.zpt at


module scope, deferring the import until later within a method call. The chameleon.zpt package
can’t be imported on platforms like GAE.

0.8a1 (2009-05-02)

Deprecation Warning and Import Alias Removals

• Since version 0.6.1, a deprecation warning has been emitted when the name model_url is im-
ported from the repoze.bfg.traversal module. This import alias (and the deprecation warn-
ing) has been removed. Any import of the model_url function will now need to be done from
repoze.bfg.url; any import of the name model_url from repoze.bfg.traversal
will now fail. This was done to remove a dependency on zope.deferredimport.

• Since version 0.6.5, a deprecation warning has been emitted when the name
RoutesModelTraverser is imported from the repoze.bfg.traversal mod-
ule. This import alias (and the deprecation warning) has been removed. Any import of
the RoutesModelTraverser class will now need to be done from repoze.bfg.
urldispatch; any import of the name RoutesModelTraverser from repoze.bfg.
traversal will now fail. This was done to remove a dependency on zope.deferredimport.

Features

• This release of repoze.bfg is ”C-free”. This means it has no hard dependencies on any software
that must be compiled from C source at installation time. In particular, repoze.bfg no longer
depends on the lxml package.

This change has introduced some backwards incompatibilities, described in the ”Backwards Incom-
patibilities” section below.

• This release was tested on Windows XP. It appears to work fine and all the tests pass.

0.6. Change History 1201


The Pyramid Web Framework, Version 1.9.4

Backwards Incompatibilities

Incompatibilities related to making repoze.bfg ”C-free”:


• Removed the repoze.bfg.chameleon_genshi module, and thus support for Genshi-style
chameleon templates. Genshi-style Chameleon templates depend upon lxml, which is implemented
in C (as opposed to pure Python) and the repoze.bfg core is ”C-free” as of this release. You may
get Genshi-style Chameleon support back by installing the repoze.bfg.chameleon_genshi
package availalable from http://svn.repoze.org/repoze.bfg.chameleon_genshi (also available in
the index at http://dist.repoze.org/bfg/0.8/simple). All existing code that depended on the
chameleon_genshi module prior to this release of repoze.bfg should work without change
after this addon is installed.
• Removed the repoze.bfg.xslt module and thus support for XSL templates. The repoze.
bfg.xslt module depended upon lxml, which is implemented in C, and the repoze.bfg core
is ”C-free” as of this release. You bay get XSL templating back by installing the repoze.bfg.
xslt package available from http://svn.repoze.org/repoze.bfg.xslt/ (also available in the index at
http://dist.repoze.org/bfg/0.8/simple). All existing code that depended upon the xslt module prior
to this release of repoze.bfg should work without modification after this addon is installed.
• Removed the repoze.bfg.interfaces.INodeTemplateRenderer interface and the an
old b/w compat aliases from that interface to repoze.bfg.interfaces.INodeTemplate.
This interface must now be imported from the repoze.bfg.xslt.interfaces package af-
ter installation of the repoze.bfg.xslt addon package described above as repoze.bfg.
interfaces.INodeTemplateRenderer. This interface was never part of any public API.
Other backwards incompatibilities:
• The render_template function in repoze.bfg.chameleon_zpt returns Unicode in-
stead of a string. Likewise, the individual values returned by the iterable created by the
render_template_to_iterable function are also each Unicode. This is actually a back-
wards incompatibility inherited from our new use of the combination of chameleon.core
1.0b32 (the non-lxml-depending version) and chameleon.zpt 1.0b16+ ; the chameleon.zpt
PageTemplateFile implementation used to return a string, but now returns Unicode.

0.7.1 (2009-05-01)

Index-Related

• The canonical package index location for repoze.bfg has changed. The ”old” index (http://dist.
repoze.org/lemonade/dev/simple) has been superseded by a new index location (http://dist.repoze.
org/bfg/current/simple). The installation documentation has been updated as well as the setup.
cfg file in this package. The ”lemonade” index still exists, but it is not guaranteed to have the latest
BFG software in it, nor will it be maintained in the future.

1202 Contents
The Pyramid Web Framework, Version 1.9.4

Features

• The ”paster create” templates have been modified to use links to the new ”bfg.repoze.org” and
”docs.repoze.org” websites.
• Added better documentation for virtual hosting at a URL prefix within the virtual hosting docs
chapter.
• The interface for repoze.bfg.interfaces.ITraverser and the built-in implementa-
tions that implement the interface (repoze.bfg.traversal.ModelGraphTraverser,
and repoze.bfg.urldispatch.RoutesModelTraverser) now expect the __call__
method of an ITraverser to return 3 additional arguments: traversed, virtual_root, and
virtual_root_path (the old contract was that the __call__ method of an ITraverser re-
turned; three arguments, the contract new is that it returns six). traversed will be a sequence of
Unicode names that were traversed (including the virtual root path, if any) or None if no traversal
was performed, virtual_root will be a model object representing the virtual root (or the physical
root if traversal was not performed), and virtual_root_path will be a sequence representing
the virtual root path (a sequence of Unicode names) or None if traversal was not performed.
Six arguments are now returned from BFG ITraversers. They are returned in this order: context,
view_name, subpath, traversed, virtual_root, and virtual_root_path.
Places in the BFG code which called an ITraverser continue to accept a 3-argument return value,
although BFG will generate and log a warning when one is encountered.
• The request object now has the following attributes: traversed (the sequence of names traversed
or None if traversal was not performed), virtual_root (the model object representing the virtual
root, including the virtual root path if any), and virtual_root_path (the seuquence of names
representing the virtual root path or None if traversal was not performed).
• A new decorator named wsgiapp2 was added to the repoze.bfg.wsgi module. This dec-
orator performs the same function as repoze.bfg.wsgi.wsgiapp except it fixes up the
SCRIPT_NAME, and PATH_INFO environment values before invoking the WSGI subapplication.
• The repoze.bfg.testing.DummyRequest object now has default attributes for
traversed, virtual_root, and virtual_root_path.
• The RoutesModelTraverser now behaves more like the Routes ”RoutesMiddleware” object when
an element in the match dict is named path_info (usually when there’s a pattern like http:/
/foo/*path_info). When this is the case, the PATH_INFO environment variable is set to
the value in the match dict, and the SCRIPT_NAME is appended to with the prefix of the original
PATH_INFO not including the value of the new variable.
• The notfound debug now shows the traversed path, the virtual root, and the virtual root path too.
• Speed up / clarify ’traversal’ module’s ’model_path’, ’model_path_tuple’, and ’_model_path_list’
functions.

0.6. Change History 1203


The Pyramid Web Framework, Version 1.9.4

Backwards Incompatibilities

• In previous releases, the repoze.bfg.url.model_url, repoze.bfg.traversal.


model_path and repoze.bfg.traversal.model_path_tuple functions always ig-
nored the __name__ argument of the root object in a model graph ( effectively replacing it with a
leading / in the returned value) when a path or URL was generated. The code required to perform
this operation was not efficient. As of this release, the root object in a model graph must have a
__name__ attribute that is either None or the empty string ('') for URLs and paths to be gener-
ated properly from these APIs. If your root model object has a __name__ argument that is not one
of these values, you will need to change your code for URLs and paths to be generated properly. If
your model graph has a root node with a string __name__ that is not null, the value of __name__
will be prepended to every path and URL generated.

• The repoze.bfg.location.LocationProxy class and the repoze.bfg.location.


ClassAndInstanceDescr class have both been removed in order to be able to eventually shed
a dependency on zope.proxy. Neither of these classes was ever an API.

• In all previous releases, the repoze.bfg.location.locate function worked like so: if


a model did not explicitly provide the repoze.bfg.interfaces.ILocation interface,
locate returned a LocationProxy object representing model with its __parent__ at-
tribute assigned to parent and a __name__ attribute assigned to __name__. In this release, the
repoze.bfg.location.locate function simply jams the __name__ and __parent__
attributes on to the supplied model unconditionally, no matter if the object implements ILocation
or not, and it never returns a proxy. This was done because the LocationProxy behavior has now
moved into an add-on package (repoze.bfg.traversalwrapper), in order to eventually be
able to shed a dependency on zope.proxy.

• In all previous releases, by default, if traversal was used (as opposed to URL-dispatch), and the
root object supplied the‘‘repoze.bfg.interfaces.ILocation‘‘ interface, but the children returned via
its __getitem__ returned an object that did not implement the same interface, repoze.bfg
provided some implicit help during traversal. This traversal feature wrapped subobjects from the
root (and thereafter) that did not implement ILocation in proxies which automatically provided
them with a __name__ and __parent__ attribute based on the name being traversed and the
previous object traversed. This feature has now been removed from the base repoze.bfg package
for purposes of eventually shedding a dependency on zope.proxy.

In order to re-enable the wrapper behavior for older applications which cannot be changed, regis-
ter the ”traversalwrapper” ModelGraphTraverser as the traversal policy, rather than the de-
fault ModelGraphTraverser. To use this feature, you will need to install the repoze.bfg.
traversalwrapper package (an add-on package, available at http://svn.repoze.org/repoze.bfg.
traversalwrapper) Then change your application’s configure.zcml to include the following
stanza:

1204 Contents
The Pyramid Web Framework, Version 1.9.4

<adapter factory=”repoze.bfg.traversalwrapper.ModelGraphTraverser”
provides=”repoze.bfg.interfaces.ITraverserFactory” for=”*” />

When this ITraverserFactory is used instead of the default, no object in the graph (even
the root object) must supply a __name__ or __parent__ attribute. Even if subobjects
returned from the root do implement the ILocation interface, these will still be wrapped
in proxies that override the object’s ”real” __parent__ and __name__ attributes.

See also changes to the ”Models” chapter of the documentation (in the ”Location-Aware
Model Instances”) section.

0.7.0 (2009-04-11)

Bug Fixes

• Fix a bug in repoze.bfg.wsgi.HTTPException: the content length was returned as an int


rather than as a string.

• Add explicit dependencies on zope.deferredimport, zope.deprecation, and zope.


proxy for forward compatibility reasons (zope.component will stop relying on zope.
deferredimport soon and although we use it directly, it’s only a transitive dependency, and
”zope.deprecation‘‘ and zope.proxy are used directly even though they’re only transitive depen-
dencies as well).

• Using model_url or model_path against a broken model graph (one with models that
had a non-root model with a __name__ of None) caused an inscrutable error to be thrown:
( if not _must_quote[cachekey].search(s): TypeError: expected string
or buffer). Now URLs and paths generated against graphs that have None names in intermedi-
ate nodes will replace the None with the empty string, and, as a result, the error won’t be raised. Of
course the URL or path will still be bogus.

Features

• Make it possible to have testing.DummyTemplateRenderer return some nondefault string


representation.

• Added a new anchor keyword argument to model_url. If anchor is present, its string rep-
resentation will be used as a named anchor in the generated URL (e.g. if anchor is passed as
foo and the model URL is http://example.com/model/url, the generated URL will be
http://example.com/model/url#foo).

0.6. Change History 1205


The Pyramid Web Framework, Version 1.9.4

Backwards Incompatibilities

• The default request charset encoding is now utf-8. As a result, the request machinery will at-
tempt to decode values from the utf-8 encoding to Unicode automatically when they are obtained
via request.params, request.GET, and request.POST. The previous behavior of BFG
was to return a bytestring when a value was accessed in this manner. This change will break form
handling code in apps that rely on values from those APIs being considered bytestrings. If you are
manually decoding values from form submissions in your application, you’ll either need to change
the code that does that to expect Unicode values from request.params, request.GET and
request.POST, or you’ll need to explicitly reenable the previous behavior. To reenable the pre-
vious behavior, add the following to your application’s configure.zcml:

<subscriber for="repoze.bfg.interfaces.INewRequest"
handler="repoze.bfg.request.make_request_ascii"/>

See also the documentation in the ”Views” chapter of the BFG docs entitled ”Using Views to Handle
Form Submissions (Unicode and Character Set Issues)”.

Documentation

• Add a section to the narrative Views chapter entitled ”Using Views to Handle Form Submissions
(Unicode and Character Set Issues)” explaining implicit decoding of form data values.

0.6.9 (2009-02-16)

Bug Fixes

• lru cache was unstable under concurrency (big surprise!) when it tried to redelete a key in the cache
that had already been deleted. Symptom: line 64 in put:del data[oldkey]:KeyError: ’/some/path’.
Now we just ignore the key error if we can’t delete the key (it has already been deleted).

• Empty location names in model paths when generating a URL using repoze.bfg.model_url
based on a model obtained via traversal are no longer ignored in the generated URL. This means
that if a non-root model object has a __name__ of '', the URL will reflect it (e.g. model_url
will generate http://foo/bar//baz if an object with the __name__ of '' is a child of bar
and the parent of baz). URLs generated with empty path segments are, however, still irresolveable
by the model graph traverser on request ingress (the traverser strips empty path segment names).

1206 Contents
The Pyramid Web Framework, Version 1.9.4

Features

• Microspeedups of repoze.bfg.traversal.model_path, repoze.bfg.traversal.


model_path_tuple, repoze.bfg.traversal.quote_path_segment, and
repoze.bfg.url.urlencode.

• add zip_safe = false to setup.cfg.

Documentation

• Add a note to the repoze.bfg.traversal.quote_path_segment API docs about


caching of computed values.

Implementation Changes

• Simplification of repoze.bfg.traversal.TraversalContextURL.__call__ (it now


uses repoze.bfg.traversal.model_path instead of rolling its own path-generation).

0.6.8 (2009-02-05)

Backwards Incompatibilities

• The repoze.bfg.traversal.model_path API now returns a quoted string rather than a


string represented by series of unquoted elements joined via / characters. Previously it returned
a string or unicode object representing the model path, with each segment name in the path joined
together via / characters, e.g. /foo /bar. Now it returns a string, where each segment is a UTF-8
encoded and URL-quoted element e.g. /foo%20/bar. This change was (as discussed briefly on
the repoze-dev maillist) necessary to accomodate model objects which themselves have __name__
attributes that contain the / character.

For people that have no models that have high-order Unicode __name__ attributes or __name__
attributes with values that require URL-quoting with in their model graphs, this won’t cause any
issue. However, if you have code that currently expects model_path to return an unquoted string,
or you have an existing application with data generated via the old method, and you’re too lazy to
change anything, you may wish replace the BFG-imported model_path in your code with this
function (this is the code of the ”old” model_path implementation):

0.6. Change History 1207


The Pyramid Web Framework, Version 1.9.4

from repoze.bfg.location import lineage

def i_am_too_lazy_to_move_to_the_new_model_path(model,␣
,→*elements):

rpath = []
for location in lineage(model):
if location.__name__:
rpath.append(location.__name__)
path = '/' + '/'.join(reversed(rpath))
if elements:
suffix = '/'.join(elements)
path = '/'.join([path, suffix])
return path

• The repoze.bfg.traversal.find_model API no longer implicitly converts unicode rep-


resentations of a full path passed to it as a Unicode object into a UTF-8 string. Callers should
either use prequoted path strings returned by repoze.bfg.traversal.model_path, or tu-
ple values returned by the result of repoze.bfg.traversal.model_path_tuple or they
should use the guidelines about passing a string path argument described in the find_model
API documentation.

Bugfixes

• Each argument contained in elements passed to repoze.bfg.traversal.model_path


will now have any / characters contained within quoted to %2F in the returned string. Previously, /
characters in elements were left unquoted (a bug).

Features

• A repoze.bfg.traversal.model_path_tuple API was added. This API is an alterna-


tive to model_path (which returns a string); model_path_tuple returns a model path as a
tuple (much like Zope’s getPhysicalPath).

• A repoze.bfg.traversal.quote_path_segment API was added. This API will quote


an individual path segment (string or unicode object). See the repoze.bfg.traversal API
documentation for more information.

1208 Contents
The Pyramid Web Framework, Version 1.9.4

• The repoze.bfg.traversal.find_model API now accepts ”path tuples” (see the above
note regarding model_path_tuple) as well as string path representations (from repoze.bfg.
traversal.model_path) as a path argument.

• Add ‘ renderer‘ argument (defaulting to None) to repoze.bfg.testing.


registerDummyRenderer. This makes it possible, for instance, to register a custom
renderer that raises an exception in a unit test.

Implementation Changes

• Moved _url_quote function back to repoze.bfg.traversal from repoze.bfg.url. This


is not an API.

0.6.7 (2009-01-27)

Features

• The repoze.bfg.url.model_url API now works against contexts derived from Routes URL
dispatch (Routes.util.url_for is called under the hood).

• ”Virtual root” support for traversal-based applications has been added. Virtual root support is useful
when you’d like to host some model in a repoze.bfg model graph as an application under a URL
pathname that does not include the model path itself. For more information, see the (new) ”Virtual
Hosting” chapter in the documentation.

• A repoze.bfg.traversal.virtual_root API has been added. When called, it returns


the virtual root object (or the physical root object if no virtual root has been specified).

Implementation Changes

• repoze.bfg.traversal.RoutesModelTraverser has been moved to repoze.bfg.


urldispatch.

• model_url URL generation is now performed via an adapter lookup based on the context and the
request.

• ZCML which registers two adapters for the IContextURL interface has been added to the config-
ure.zcml in repoze.bfg.includes.

0.6. Change History 1209


The Pyramid Web Framework, Version 1.9.4

0.6.6 (2009-01-26)

Implementation Changes

• There is an indirection in repoze.bfg.url.model_url now that consults a utility to generate


the base model url (without extra elements or a query string). Eventually this will service virtual
hosting; for now it’s undocumented and should not be hooked.

0.6.5 (2009-01-26)

Features

• You can now override the NotFound and Unauthorized responses that repoze.bfg generates when
a view cannot be found or cannot be invoked due to lack of permission. See the ”ZCML Hooks”
chapter in the docs for more information.

• Added Routes ZCML directive attribute explanations in documentation.

• Added a traversal_path API to the traversal module; see the ”traversal” API chapter in the
docs. This was a function previously known as split_path that was not an API but people were
using it anyway. Unlike split_path, it now returns a tuple instead of a list (as its values are
cached).

Behavior Changes

• The repoze.bfg.view.render_view_to_response API will no longer raise a ValueEr-


ror if an object returned by a view function it calls does not possess certain attributes (headerlist,
app_iter, status). This API used to attempt to perform a check using the is_response
function in repoze.bfg.view, and raised a ValueError if the is_response check failed.
The responsibility is now the caller’s to ensure that the return value from a view function is a ”real”
response.

• WSGI environ dicts passed to repoze.bfg ’s Router must now contain a REQUEST_METHOD
key/value; if they do not, a KeyError will be raised (speed).

• It is no longer permissible to pass a ”nested” list of principals to repoze.bfg.


ACLAuthorizer.permits (e.g. ['fred', ['larry', 'bob']]). The principals list
must be fully expanded. This feature was never documented, and was never an API, so it’s not a
backwards incompatibility.

1210 Contents
The Pyramid Web Framework, Version 1.9.4

• It is no longer permissible for a security ACE to contain a ”nested” list of permissions (e.g.
(Allow, Everyone, ['read', ['view', ['write', 'manage']]])`)`.
The list must instead be fully expanded (e.g. ``(Allow, Everyone,
['read', 'view', 'write', 'manage])). This feature was never documented, and
was never an API, so it’s not a backwards incompatibility.

• The repoze.bfg.urldispatch.RoutesRootFactory now injects the wsgiorg.


routing_args environment variable into the environ when a route matches. This is a tuple
of ((), routing_args) where routing_args is the value that comes back from the routes mapper match
(the ”match dict”).

• The repoze.bfg.traversal.RoutesModelTraverser class now wants to obtain the


view_name and subpath from the wsgiorgs.routing_args environment variable. It falls
back to obtaining these from the context for backwards compatibility.

Implementation Changes

• Get rid of repoze.bfg.security.ACLAuthorizer: the ACLSecurityPolicy now


does what it did inline.

• Get rid of repoze.bfg.interfaces.NoAuthorizationInformation exception: it


was used only by ACLAuthorizer.

• Use a homegrown NotFound error instead of webob.exc.HTTPNotFound (the latter is slow).

• Use a homegrown Unauthorized error instead of webob.exc.Unauthorized (the latter is


slow).

• the repoze.bfg.lru.lru_cached decorator now uses functools.wraps in order to make doc-


umentation of LRU-cached functions possible.

• Various speed micro-tweaks.

Bug Fixes

• repoze.bfg.testing.DummyModel did not have a get method; it now does.

0.6. Change History 1211


The Pyramid Web Framework, Version 1.9.4

0.6.4 (2009-01-23)

Backwards Incompatibilities

• The unicode_path_segments configuration variable and the


BFG_UNICODE_PATH_SEGMENTS configuration variable have been removed. Path seg-
ments are now always passed to model __getitem__ methods as unicode. ”True” has been the
default for this setting since 0.5.4, but changing this configuration setting to false allowed you to go
back to passing raw path element strings to model __getitem__ methods. Removal of this knob
services a speed goal (we get about +80 req/s by removing the check), and it’s clearer just to always
expect unicode path segments in model __getitem__ methods.

Implementation Changes

• repoze.bfg.traversal.split_path now also handles decoding path segments to unicode


(for speed, because its results are cached).

• repoze.bfg.traversal.step was made a method of the ModelGraphTraverser.

• Use ”precooked” Request subclasses (e.g. repoze.bfg.request.GETRequest) that corre-


spond to HTTP request methods within router.py when constructing a request object rather than
using alsoProvides to attach the proper interface to an unsubclassed webob.Request. This
pattern is purely an optimization (e.g. preventing calls to alsoProvides means the difference
between 590 r/s and 690 r/s on a MacBook 2GHz).

• Tease out an extra 4% performance boost by changing the Router; instead of using imported ZCA
APIs, use the same APIs directly against the registry that is an attribute of the Router.

• The registry used by BFG is now a subclass of zope.component.registry.


Components (defined as repoze.bfg.registry.Registry); it has a notify method,
a registerSubscriptionAdapter and a registerHandler method. If no subscribers
are registered via registerHandler or registerSubscriptionAdapter, notify is a
noop for speed.

• The Allowed and Denied classes in repoze.bfg.security now are lazier about
constructing the representation of a reason message for speed; repoze.bfg.
view_execution_permitted takes advantage of this.

• The is_response check was sped up by about half at the expense of making its code slightly
uglier.

1212 Contents
The Pyramid Web Framework, Version 1.9.4

New Modules

• repoze.bfg.lru implements an LRU cache class and a decorator for internal use.

0.6.3 (2009-01-19)

Bug Fixes

• Readd root_policy attribute on Router object (as a property which returns the IRootFactory
utility). It was inadvertently removed in 0.6.2. Code in the wild depended upon its presence (esp.
scripts and ”debug” helpers).

Features

• URL-dispatch has been overhauled: it is no longer necessary to manually create a RoutesMap-


per in your application’s entry point callable in order to use URL-dispatch (aka Routes). A new
route directive has been added to the available list of ZCML directives. Each route direc-
tive inserted into your application’s configure.zcml establishes a Routes mapper connection.
If any route declarations are made via ZCML within a particular application, the get_root
callable passed in to repoze.bfg.router.make_app will automatically be wrapped in the
equivalent of a RoutesMapper. Additionally, the new route directive allows the specification of
a context_interfaces attribute for a route, this will be used to tag the manufactured routes
context with specific interfaces when a route specifying a context_interfaces attribute is
matched.

• A new interface repoze.bfg.interfaces.IContextNotFound was added. This inter-


face is attached to a ”dummy” context generated when Routes cannot find a match and there is no
”fallback” get_root callable that uses traversal.

• The bfg_starter and bfg_zodb ”paster create” templates now contain images and CSS which
are displayed when the default page is displayed after initial project generation.

• Allow the repoze.bfg.view.static helper to be passed a relative root_path name; it will


be considered relative to the file in which it was called.

0.6. Change History 1213


The Pyramid Web Framework, Version 1.9.4

• The functionality of repoze.bfg.convention has been merged into the core. Applications
which make use of repoze.bfg.convention will continue to work indefinitely, but it is rec-
ommended that apps stop depending upon it. To do so, substitute imports of repoze.bfg.
convention.bfg_view with imports of repoze.bfg.view.bfg_view, and change the
stanza in ZCML from <convention package="."> to <scan package=".">. As a re-
sult of the merge, bfg has grown a new dependency: martian.

• View functions which use the pushpage decorator are now pickleable (meaning their use won’t pre-
vent a configure.zcml.cache file from being written to disk).

• Instead of invariably using webob.Request as the ”request factory” (e.g. in


the Router class) and webob.Response and the ”response factory” (e.g. in
render_template_to_response), allow both to be overridden via a ZCML utility
hook. See the ”Using ZCML Hooks” chapter of the documentation for more information.

Deprecations

• The class repoze.bfg.urldispatch.RoutesContext has been renamed to repoze.


bfg.urldispatch.DefaultRoutesContext. The class should be imported by the new
name as necessary (although in reality it probably shouldn’t be imported from anywhere except
internally within BFG, as it’s not part of the API).

Implementation Changes

• The repoze.bfg.wsgi.wsgiapp decorator now uses webob.Request.get_response


to do its work rather than relying on homegrown WSGI code.

• The repoze.bfg.view.static helper now uses webob.Request.get_response to do


its work rather than relying on homegrown WSGI code.

• The repoze.bfg.urldispatch.RoutesModelTraverser class has been moved to


repoze.bfg.traversal.RoutesModelTraverser.

• The repoze.bfg.registry.makeRegistry function was renamed to repoze.bfg.


registry.populateRegistry and now accepts a registry argument (which should be
an instance of zope.component.registry.Components).

1214 Contents
The Pyramid Web Framework, Version 1.9.4

Documentation Additions

• Updated narrative urldispatch chapter with changes required by <route..> ZCML directive.

• Add a section on ”Using BFG Security With URL Dispatch” into the urldispatch chapter of the
documentation.

• Better documentation of security policy implementations that ship with repoze.bfg.

• Added a ”Using ZPT Macros in repoze.bfg” section to the narrative templating chapter.

0.6.2 (2009-01-13)

Features

• Tests can be run with coverage output if you’ve got nose installed in the interpreter which you use to
run tests. Using an interpreter with nose installed, do python setup.py nosetests within
a checkout of the repoze.bfg package to see test coverage output.

• Added a post argument to the repoze.bfg.testing:DummyRequest constructor.

• Added __len__ and __nonzero__ to repoze.bfg.testing:DummyModel.

• The repoze.bfg.registry.get_options callable (now renamed to repoze.bfg.


setings.get_options) used to return only framework-specific keys and values in the dic-
tionary it returned. It now returns all the keys and values in the dictionary it is passed plus
any framework-specific settings culled from the environment. As a side effect, all PasteDeploy
application-specific config file settings are made available as attributes of the ISettings utility
from within BFG.

• Renamed the existing BFG paster template to bfg_starter. Added another template
(bfg_zodb) showing default ZODB setup using repoze.zodbconn.

• Add a method named assert_ to the DummyTemplateRenderer. This method accepts keyword
arguments. Each key/value pair in the keyword arguments causes an assertion to be made that the
renderer received this key with a value equal to the asserted value.

• Projects generated by the paster templates now use the DummyTemplateRenderer.assert_


method in their view tests.

0.6. Change History 1215


The Pyramid Web Framework, Version 1.9.4

• Make the (internal) thread local registry manager maintain a stack of registries in order to make it
possible to call one BFG application from inside another.

• An interface specific to the HTTP verb (GET/PUT/POST/DELETE/HEAD) is attached to each


request object on ingress. The HTTP-verb-related interfaces are defined in repoze.bfg.
interfaces and are IGETRequest, IPOSTRequest, IPUTRequest, IDELETERequest
and IHEADRequest. These interfaces can be specified as the request_type attribute of a bfg
view declaration. A view naming a specific HTTP-verb-matching interface will be found only if the
view is defined with a request_type that matches the HTTP verb in the incoming request. The more
general IRequest interface can be used as the request_type to catch all requests (and this is indeed
the default). All requests implement IRequest. The HTTP-verb-matching idea was pioneered by
repoze.bfg.restrequest . That package is no longer required, but still functions fine.

Bug Fixes

• Fix a bug where the Paste configuration’s unicode_path_segments (and os.environ’s


BFG_UNICODE_PATH_SEGMENTS) may have been defaulting to false in some circumstances.
It now always defaults to true, matching the documentation and intent.

• The repoze.bfg.traversal.find_model API did not work properly when


passed a path argument which was unicode and contained high-order bytes when the
unicode_path_segments or BFG_UNICODE_PATH_SEGMENTS configuration variables
were ”true”.

• A new module was added: repoze.bfg.settings. This contains deployment-settings-related


code.

Implementation Changes

• The make_app callable within repoze.bfg.router now registers the root_policy ar-
gument as a utility (unnamed, using the new repoze.bfg.interfaces.IRootFactory as
a provides interface) rather than passing it as the first argument to the repoze.bfg.router.
Router class. As a result, the repoze.bfg.router.Router router class only accepts a single
argument: registry. The repoze.bfg.router.Router class retrieves the root policy via
a utility lookup now. The repoze.bfg.router.make_app API also now performs some im-
portant application registrations that were previously handled inside repoze.bfg.registry.
makeRegistry.

1216 Contents
The Pyramid Web Framework, Version 1.9.4

New Modules

• A repoze.bfg.settings module was added. It contains code related to deployment settings.


Most of the code it contains was moved to it from the repoze.bfg.registry module.

Behavior Changes

• The repoze.bfg.settings.Settings class (an instance of which is registered as a util-


ity providing repoze.bfg.interfaces.ISettings when any application is started) now
automatically calls repoze.bfg.settings.get_options on the options passed to its con-
structor. This means that usage of get_options within an application’s make_app function is
no longer required (the ”raw” options dict or None may be passed).

• Remove old cold which attempts to recover from trying to unpickle a z3c.pt template; Chameleon
has been the templating engine for a good long time now. Running repoze.bfg against a sandbox that
has pickled z3c.pt templates it will now just fail with an unpickling error, but can be fixed by
deleting the template cache files.

Deprecations

• Moved the repoze.bfg.registry.Settings class. This has been moved to repoze.


bfg.settings.Settings. A deprecation warning is issued when it is imported from the older
location.

• Moved the repoze.bfg.registry.get_options function This has been moved to


repoze.bfg.settings.get_options. A deprecation warning is issued when it is imported
from the older location.

• The repoze.bfg.interfaces.IRootPolicy interface was renamed within the interfaces


package. It has been renamed to IRootFactory. A deprecation warning is issued when it is
imported from the older location.

0.6.1 (2009-01-06)

New Modules

• A new module repoze.bfg.url has been added. It contains the model_url API (moved from
repoze.bfg.traversal) and an implementation of urlencode (like Python’s urllib.
urlencode) which can handle Unicode keys and values in parameters to the query argument.

0.6. Change History 1217


The Pyramid Web Framework, Version 1.9.4

Deprecations

• The model_url function has been moved from repoze.bfg.traversal into repoze.
bfg.url. It can still be imported from repoze.bfg.traversal but an import from
repoze.bfg.traversal will emit a DeprecationWarning.

Features

• A static helper class was added to the repoze.bfg.views module. Instances of this class
are willing to act as BFG views which return static resources using files on disk. See the repoze.
bfg.view docs for more info.

• The repoze.bfg.url.model_url API (nee’ repoze.bfg.traversal.model_url)


now accepts and honors a keyword argument named query. The value of this argument will be
used to compose a query string, which will be attached to the generated URL before it is returned.
See the API docs (in the docs directory or on the web) for more information.

0.6 (2008-12-26)

Backwards Incompatibilities

• Rather than prepare the ”stock” implementations of the ZCML directives from the zope.
configuration package for use under repoze.bfg, repoze.bfg now makes available
the implementations of directives from the repoze.zcml package (see http://static.repoze.org/
zcmldocs). As a result, the repoze.bfg package now depends on the repoze.zcml package,
and no longer depends directly on the zope.component, zope.configuration, zope.
interface, or zope.proxy packages.

The primary reason for this change is to enable us to eventually reduce the number of inappropri-
ate repoze.bfg Zope package dependencies, as well as to shed features of dependent package
directives that don’t make sense for repoze.bfg.

Note that currently the set of requirements necessary to use bfg has not changed. This is due to
inappropriate Zope package requirements in chameleon.zpt, which will hopefully be remedied
soon. NOTE: in lemonade index a 1.0b8-repozezcml0 package exists which does away with these
requirements.

1218 Contents
The Pyramid Web Framework, Version 1.9.4

• BFG applications written prior to this release which expect the ”stock” zope.component
ZCML directive implementations (e.g. adapter, subscriber, or utility) to func-
tion now must either 1) include the meta.zcml file from zope.component manually
(e.g. <include package="zope.component" file="meta.zcml">) and include the
zope.security package as an install_requires dependency or 2) change the ZCML
in their applications to use the declarations from repoze.zcml instead of the stock declarations.
repoze.zcml only makes available the adapter, subscriber and utility directives.

In short, if you’ve got an existing BFG application, after this update, if your application won’t start
due to an import error for ”zope.security”, the fastest way to get it working again is to add zope.
security to the ”install_requires” of your BFG application’s setup.py, then add the following
ZCML anywhere in your application’s configure.zcml:

<include package="zope.component" file="meta.zcml">

Then re-setup.py develop or reinstall your application.

• The http://namespaces.repoze.org/bfg XML namespace is now the default XML


namespace in ZCML for paster-generated applications. The docs have been updated to reflect this.

• The copies of BFG’s meta.zcml and configure.zcml were removed from the root of the
repoze.bfg package. In 0.3.6, a new package named repoze.bfg.includes was added,
which contains the ”correct” copies of these ZCML files; the ones that were removed were for
backwards compatibility purposes.

• The BFG view ZCML directive no longer calls zope.component.interface.


provideInterface for the for interface. We don’t support provideInterface in
BFG because it mutates the global registry.

Other

• The minimum requirement for chameleon.core is now 1.0b13. The minimum requirement for
chameleon.zpt is now 1.0b8. The minimum requirement for chameleon.genshi is now
1.0b2.

• Updated paster template ”ez_setup.py” to one that requires setuptools 0.6c9.

• Turn view_execution_permitted from the repoze.bfg.view module into a docu-


mented API.

• Doc cleanups.

• Documented how to create a view capable of serving static resources.

0.6. Change History 1219


The Pyramid Web Framework, Version 1.9.4

0.5.6 (2008-12-18)

• Speed up traversal.model_url execution by using a custom url quoting function instead of


Python’s urllib.quote, by caching URL path segment quoting and encoding results, by disus-
ing Python’s urlparse.urljoin in favor of a simple string concatenation, and by using ob.
__class__ is unicode rather than isinstance(ob, unicode) in one strategic place.

0.5.5 (2008-12-17)

Backwards Incompatibilities

• In the past, during traversal, the ModelGraphTraverser (the default traverser) always passed each
URL path segment to any __getitem__ method of a model object as a byte string (a str ob-
ject). Now, by default the ModelGraphTraverser attempts to decode the path segment to Unicode
(a unicode object) using the UTF-8 encoding before passing it to the __getitem__ method of
a model object. This makes it possible for model objects to be dumber in __getitem__ when
trying to resolve a subobject, as model objects themselves no longer need to try to divine whether or
not to try to decode the path segment passed by the traverser.

Note that since 0.5.4, URLs generated by repoze.bfg’s model_url API will contain UTF-8 en-
coded path segments as necessary, so any URL generated by BFG itself will be decodeable by the
traverser. If another application generates URLs to a BFG application, to be resolved successully,
it should generate the URL with UTF-8 encoded path segments to be successfully resolved. The
decoder is not at all magical: if a non-UTF-8-decodeable path segment (e.g. one encoded using
UTF-16 or some other insanity) is passed in the URL, BFG will raise a TypeError with a mes-
sage indicating it could not decode the path segment.

To turn on the older behavior, where path segments were not decoded to Unicode before being
passed to model object __getitem__ by the traverser, and were passed as a raw byte string, set
the unicode_path_segments configuration setting to a false value in your BFG application’s
section of the paste .ini file, for example:

unicode_path_segments = False

Or start the application using the BFG_UNICODE_PATH_SEGMENT envvar set to a false value:

BFG_UNICODE_PATH_SEGMENTS=0

1220 Contents
The Pyramid Web Framework, Version 1.9.4

0.5.4 (2008-12-13)

Backwards Incompatibilities

• URL-quote ”extra” element names passed in as **elements to the traversal.model_url


API. If any of these names is a Unicode string, encode it to UTF-8 before URL-quoting. This is a
slight backwards incompatibility that will impact you if you were already UTF-8 encoding or URL-
quoting the values you passed in as elements to this API.

Bugfixes

• UTF-8 encode each segment in the model path used to generate a URL before url-quoting it within
the traversal.model_url API. This is a bugfix, as Unicode cannot always be successfully
URL-quoted.

Features

• Make it possible to run unit tests using a buildout-generated Python ”interpreter”.

• Add request.root to router.Router in order to have easy access to the application root.

0.5.3 (2008-12-07)

• Remove the ITestingTemplateRenderer interface. When testing.


registerDummyRenderer is used, it instead registers a dummy implementation using
ITemplateRenderer interface, which is checked for when the built-in templating facilities do
rendering. This change also allows developers to make explcit named utility registrations in the
ZCML registry against ITemplateRenderer; these will be found before any on-disk template
is looked up.

0.6. Change History 1221


The Pyramid Web Framework, Version 1.9.4

0.5.2 (2008-12-05)

• The component registration handler for views (functions or class instances) now observes component
adaptation annotations (see zope.component.adaptedBy) and uses them before the fallback
values for for_ and request_type. This change does not affect existing code insomuch as
the code does not rely on these defaults when an annotation is set on the view (unlikely). This
means that for a new-style class you can do zope.component.adapts(ISomeContext,
ISomeRequest) at class scope or at module scope as a decorator to a bfg view function you can
do @zope.component.adapter(ISomeContext, ISomeRequest). This differs from
r.bfg.convention inasmuch as you still need to put something in ZCML for the registrations to get
done; it’s only the defaults that will change if these declarations exist.

• Strip all slashes from end and beginning of path in clean_path within traversal machinery.

0.5.1 (2008-11-25)

• Add keys, items, and values methods to testing.DummyModel.

• Add __delitem__ method to testing.DummyModel.

0.5.0 (2008-11-18)

• Fix ModelGraphTraverser; don’t try to change the __name__ or __parent__ of an object that
claims it implements ILocation during traversal even if the __name__ or __parent__ of the
object traversed does not match the name used in the traversal step or the or the traversal parent .
Rationale: it was insane to do so. This bug was only found due to a misconfiguration in an application
that mistakenly had intermediate persistent non-ILocation objects; traversal was causing a persistent
write on every request under this setup.

• repoze.bfg.location.locate now unconditionally sets __name__ and __parent__


on objects which provide ILocation (it previously only set them conditionally if they didn’t match
attributes already present on the object via equality).

1222 Contents
The Pyramid Web Framework, Version 1.9.4

0.4.9 (2008-11-17)

• Add chameleon text template API (chameleon ${name} renderings where the template does not need
to be wrapped in any containing XML).

• Change docs to explain install in terms of a virtualenv (unconditionally).

• Make pushpage decorator compatible with repoze.bfg.convention’s bfg_view decorator when


they’re stacked.

• Add content_length attribute to testing.DummyRequest.

• Change paster template tests.py to include a true unit test. Retain old test as an integration test.
Update documentation.

• Document view registrations against classes and repoze.bfg.convention in context.

• Change the default paster template to register its single view against a class rather than an interface.

• Document adding a request type interface to the request via a subscriber function in the events
narrative documentation.

0.4.8 (2008-11-12)

Backwards Incompatibilities

• repoze.bfg.traversal.model_url now always appends a slash to all generated URLs


unless further elements are passed in as the third and following arguments. Rationale: views often
use model_url without the third-and-following arguments in order to generate a URL for a model
in order to point at the default view of a model. The URL that points to the default view of the root
model is technically http://mysite/ as opposed to http://mysite (browsers happen to ask
for ’/’ implicitly in the GET request). Because URLs are never automatically generated for anything
except models by model_url, and because the root model is not really special, we continue this
pattern. The impact of this change is minimal (at most you will have too many slashes in your URL,
which BFG deals with gracefully anyway).

0.6. Change History 1223


The Pyramid Web Framework, Version 1.9.4

0.4.7 (2008-11-11)

Features

• Allow testing.registerEventListener to be used with Zope 3 style ”object events” (sub-


scribers accept more than a single event argument). We extend the list with the arguments, rather
than append.

0.4.6 (2008-11-10)

Bug Fixes

• The model_path and model_url traversal APIs returned the wrong value for the root object
(e.g. model_path returned '' for the root object, while it should have been returning '/').

0.4.5 (2008-11-09)

Features

• Added a clone method and a __contains__ method to the DummyModel testing object.

• Allow DummyModel objects to receive extra keyword arguments, which will be attached as at-
tributes.

• The DummyTemplateRenderer now returns self as its implementation.

0.4.4 (2008-11-08)

Features

• Added a repoze.bfg.testing module to attempt to make it slightly easier to write unittest-


based automated tests of BFG applications. Information about this module is in the documentation.

• The default template renderer now supports testing better by looking for
ITestingTemplateRenderer using a relative pathname. This is exposed indirectly
through the API named registerTemplateRenderer in repoze.bfg.testing.

1224 Contents
The Pyramid Web Framework, Version 1.9.4

Deprecations

• The names repoze.bfg.interfaces.ITemplate , repoze.bfg.interfaces.


ITemplateFactory and repoze.bfg.interfaces.INodeTemplate have been depre-
cated. These should now be imported as repoze.bfg.interfaces.ITemplateRenderer
and repoze.bfg.interfaces.ITemplateRendererFactory, and
INodeTemplateRenderer respectively.

• The name repoze.bfg.chameleon_zpt.ZPTTemplateFactory is deprecated. Use


repoze.bfg.chameleon_zpt.ZPTTemplateRenderer.

• The name repoze.bfg.chameleon_genshi.GenshiTemplateFactory is deprecated.


Use repoze.bfg.chameleon_genshi.GenshiTemplateRenderer.

• The name repoze.bfg.xslt.XSLTemplateFactory is deprecated. Use repoze.bfg.


xslt.XSLTemplateRenderer.

0.4.3 (2008-11-02)

Bug Fixes

• Not passing the result of ”get_options” as the second argument of make_app could cause attribute
errors when attempting to look up settings against the ISettings object (internal). Fixed by giving the
Settings objects defaults for debug_authorization and debug_notfound.

• Return an instance of Allowed (rather than True) from has_permission when no security
policy is in use.

• Fix bug where default deny in authorization check would throw a TypeError (use ACLDenied
instead of Denied).

0.6. Change History 1225


The Pyramid Web Framework, Version 1.9.4

0.4.2 (2008-11-02)

Features

• Expose a single ILogger named ”repoze.bfg.debug” as a utility; this logger is registered uncondi-
tionally and is used by the authorization debug machinery. Applications may also make use of it as
necessary rather than inventing their own logger, for convenience.

• The BFG_DEBUG_AUTHORIZATION envvar and the debug_authorization config file


value now only imply debugging of view-invoked security checks. Previously, information was
printed for every call to has_permission as well, which made output confusing. To debug
has_permission checks and other manual permission checks, use the debugger and print state-
ments in your own code.

• Authorization debugging info is now only present in the HTTP response body oif
debug_authorization is true.

• The format of authorization debug messages was improved.

• A new BFG_DEBUG_NOTFOUND envvar was added and a symmetric debug_notfound config


file value was added. When either is true, and a NotFound response is returned by the BFG router
(because a view could not be found), debugging information is printed to stderr. When this value is
set true, the body of HTTPNotFound responses will also contain the same debugging information.

• Allowed and Denied responses from the security machinery are now specialized into two
types: ACL types, and non-ACL types. The ACL-related responses are instances of repoze.
bfg.security.ACLAllowed and repoze.bfg.security.ACLDenied. The non-ACL-
related responses are repoze.bfg.security.Allowed and repoze.bfg.security.
Denied. The allowed-type responses continue to evaluate equal to things that themselves evaluate
equal to the True boolean, while the denied-type responses continue to evaluate equal to things that
themselves evaluate equal to the False boolean. The only difference between the two types is the
information attached to them for debugging purposes.

• Added a new BFG_DEBUG_ALL envvar and a symmetric debug_all config file value. When
either is true, all other debug-related flags are set true unconditionally (e.g. debug_notfound
and debug_authorization).

Documentation

• Added info about debug flag changes.

• Added a section to the security chapter named ”Debugging Imperative Authorization Failures” (for
e.g. has_permssion).

1226 Contents
The Pyramid Web Framework, Version 1.9.4

Bug Fixes

• Change default paster template generator to use Paste#http server rather than
PasteScript#cherrpy server. The cherrypy server has a security risk in it when
REMOTE_USER is trusted by the downstream application.

0.4.1 (2008-10-28)

Bug Fixes

• If the render_view_to_response function was called, if the view was found and called, but
it returned something that did not implement IResponse, the error would pass by unflagged. This
was noticed when I created a view function that essentially returned None, but received a NotFound
error rather than a ValueError when the view was rendered. This was fixed.

0.4.0 (2008-10-03)

Docs

• An ”Environment and Configuration” chapter was added to the narrative portion of the documenta-
tion.

Features

• Ensure bfg doesn’t generate warnings when running under Python 2.6.

• The environment variable BFG_RELOAD_TEMPLATES is now available (serves the same purpose
as reload_templates in the config file).

• A new configuration file option debug_authorization was added. This turns on printing of
security authorization debug statements to sys.stderr. The BFG_DEBUG_AUTHORIZATION
environment variable was also added; this performs the same duty.

0.6. Change History 1227


The Pyramid Web Framework, Version 1.9.4

Bug Fixes

• The environment variable BFG_SECURITY_DEBUG did not always work. It has been renamed to
BFG_DEBUG_AUTHORIZATION and fixed.

Deprecations

• A deprecation warning is now issued when old API names from the repoze.bfg.templates
module are imported.

Backwards incompatibilities

• The BFG_SECURITY_DEBUG environment variable was renamed to


BFG_DEBUG_AUTHORIZATION.

0.3.9 (2008-08-27)

Features

• A repoze.bfg.location API module was added.

Backwards incompatibilities

• Applications must now use the repoze.bfg.interfaces.ILocation interface rather than


zope.location.interfaces.ILocation to represent that a model object is ”location-
aware”. We’ve removed a dependency on zope.location for cleanliness purposes: as new ver-
sions of zope libraries are released which have improved dependency information, getting rid of our
dependence on zope.location will prevent a newly installed repoze.bfg application from re-
quiring the zope.security, egg, which not truly used at all in a ”stock” repoze.bfg setup. These
dependencies are still required by the stack at this time; this is purely a futureproofing move.

The security and model documentation for previous versions of repoze.bfg recommended using
the zope.location.interfaces.ILocation interface to represent that a model object is
”location-aware”. This documentation has been changed to reflect that this interface should now be
imported from repoze.bfg.interfaces.ILocation instead.

1228 Contents
The Pyramid Web Framework, Version 1.9.4

0.3.8 (2008-08-26)

Docs

• Documented URL dispatch better in narrative form.

Bug fixes

• Routes URL dispatch did not have access to the WSGI environment, so conditions such as
method=GET did not work.

Features

• Add principals_allowed_by_permission API to security module.

• Replace z3c.pt support with support for chameleon.zpt. Chameleon is the new name for the
package that used to be named z3c.pt. NOTE: If you update a repoze.bfg SVN checkout that
you’re using for development, you will need to run ”setup.py install” or ”setup.py develop” again in
order to obtain the proper Chameleon packages. z3c.pt is no longer supported by repoze.bfg.
All API functions that used to render z3c.pt templates will work fine with the new packages, and
your templates should render almost identically.

• Add a repoze.bfg.chameleon_zpt module. This module provides Chameleon ZPT support.

• Add a repoze.bfg.xslt module. This module provides XSLT support.

• Add a repoze.bfg.chameleon_genshi module. This provides direct Genshi support, which


did not exist previously.

Deprecations

• Importing API functions directly from repoze.bfg.template is now deprecated. The


get_template, render_template, render_template_to_response functions
should now be imported from repoze.chameleon_zpt. The render_transform, and
render_transform_to_response functions should now be imported from repoze.
bfg.xslt. The repoze.bfg.template module will remain around ”forever” to support
backwards compatibility.

0.6. Change History 1229


The Pyramid Web Framework, Version 1.9.4

0.3.7 (2008-09-09)

Features

• Add compatibility with z3c.pt 1.0a7+ (z3c.pt became a namespace package).

Bug fixes

• repoze.bfg.traversal.find_model function did not function properly.

0.3.6 (2008-09-04)

Features

• Add startup process docs.


• Allow configuration cache to be bypassed by actions which include special ”uncacheable” discrim-
inators (for actions that have variable results).

Bug Fixes

• Move core repoze.bfg ZCML into a repoze.bfg.includes package so we can use repoze.bfg
better as a namespace package. Adjust the code generator to use it. We’ve left around the
configure.zcml in the repoze.bfg package directly so as not to break older apps.
• When a zcml application registry cache was unpickled, and it contained a reference to an object that
no longer existed (such as a view), bfg would not start properly.

0.3.5 (2008-09-01)

Features

• Event notification is issued after application is created and configured


(IWSGIApplicationCreatedEvent).
• New API module: repoze.bfg.view. This module contains the functions named
render_view_to_response, render_view_to_iterable, render_view and
is_response, which are documented in the API docs. These features aid programmatic
(non-server-driven) view execution.

1230 Contents
The Pyramid Web Framework, Version 1.9.4

0.3.4 (2008-08-28)

Backwards incompatibilities

• Make repoze.bfg a namespace package so we can allow folks to create subpackages (e.g.
repoze.bfg.otherthing) within separate eggs. This is a backwards incompatible change
which makes it impossible to import ”make_app” and ”get_options” from the repoze.bfg mod-
ule directly. This change will break all existing apps generated by the paster code generator. Instead,
you need to import these functions as repoze.bfg.router:make_app and repoze.bfg.
registry:get_options, respectively. Sorry folks, it has to be done now or never, and defi-
nitely better now.

Features

• Add model_path API function to traversal module.

Bugfixes

• Normalize path returned by repoze.bfg.caller_path.

0.3.3 (2008-08-23)

• Fix generated test.py module to use project name rather than package name.

0.3.2 (2008-08-23)

• Remove sampleapp sample application from bfg package itself.

• Remove dependency on FormEncode (only needed by sampleapp).

• Fix paster template generation so that case-sensitivity is preserved for project vs. package name.

• Depend on z3c.pt version 1.0a1 (which requires the [lxml] extra currently).

• Read and write a pickled ZCML actions list, stored as configure.zcml.cache next to the
applications’s ”normal” configuration file. A given bfg app will usually start faster if it’s able to read
the pickle data. It fails gracefully to reading the real ZCML file if it cannot read the pickle.

0.6. Change History 1231


The Pyramid Web Framework, Version 1.9.4

0.3.1 (2008-08-20)

• Generated application differences: make_app entry point renamed to app in order to have a dif-
ferent name than the bfg function of the same name, to prevent confusion.

• Add ”options” processing to bfg’s make_app to support runtime options. A new API func-
tion named get_options was added to the registry module. This function is typically used in
an application’s app entry point. The Paste config file section for the app can now supply the
reload_templates option, which, if true, will prevent the need to restart the appserver in order
for z3c.pt or XSLT template changes to be detected.

• Use only the module name in generated project’s ”test_suite” (run all tests found in the package).

• Default port for generated apps changed from 5432 to 6543 (Postgres default port is 6543).

0.3.0 (2008-08-16)

• Add get_template API to template module.

0.2.9 (2008-08-11)

• 0.2.8 was ”brown bag” release. It didn’t work at all. Symptom: ComponentLookupError when
trying to render a page.

0.2.8 (2008-08-11)

• Add find_model and find_root traversal APIs. In the process, make ITraverser a uni-adapter
(on context) rather than a multiadapter (on context and request).

1232 Contents
The Pyramid Web Framework, Version 1.9.4

0.2.7 (2008-08-05)

• Add a request_type attribute to the available attributes of a bfg:view configure.zcml ele-


ment. This attribute will have a value which is a dotted Python path, pointing at an interface. If the
request object implements this interface when the view lookup is performed, the appropriate view
will be called. This is meant to allow for simple ”skinning” of sites based on request type. An event
subscriber should attach the interface to the request on ingress to support skins.

• Remove ”template only” views. These were just confusing and were never documented.

• Small url dispatch overhaul: the connect method of the urldispatch.RoutesMapper ob-
ject now accepts a keyword parameter named context_factory. If this parameter is supplied,
it must be a callable which returns an instance. This instance is used as the context for the request
when a route is matched.

• The registration of a RoutesModelTraverser no longer needs to be performed by the application; it’s


in the bfg ZCML now.

0.2.6 (2008-07-31)

• Add event sends for INewRequest and INewResponse. See the events.rst chapter in the documenta-
tion’s api directory.

0.2.5 (2008-07-28)

• Add model_url API.

0.2.4 (2008-07-27)

• Added url-based dispatch.

0.2.3 (2008-07-20)

• Add API functions for authenticated_userid and effective_principals.

0.6. Change History 1233


The Pyramid Web Framework, Version 1.9.4

0.2.2 (2008-07-20)

• Add authenticated_userid and effective_principals API to security policy.

0.2.1 (2008-07-20)

• Add find_interface API.

0.2 (2008-07-19)

• Add wsgiapp decorator.

• The concept of ”view factories” was removed in favor of always calling a view, which is a callable
that returns a response directly (as opposed to returning a view). As a result, the factory attribute
in the bfg:view ZCML statement has been renamed to view. Various interface names were changed
also.

• render_template and render_transform no longer return a Response ob-


ject. Instead, these return strings. The old behavior can be obtained by using
render_template_to_response and render_transform_to_response.

• Added ’repoze.bfg.push:pushpage’ decorator, which creates BFG views from callables which take
(context, request) and return a mapping of top-level names.

• Added ACL-based security.

• Support for XSLT templates via a render_transform method

0.1 (2008-07-08)

• Initial release.

1234 Contents
The Pyramid Web Framework, Version 1.9.4

0.7 Glossary and Index

0.7.1 Glossary

ACE An access control entry. An access control entry is one element in an ACL. An access control entry
is a three-tuple that describes three things: an action (one of either Allow or Deny), a principal
(a string describing a user or group), and a permission. For example the ACE, (Allow, 'bob',
'read') is a member of an ACL that indicates that the principal bob is allowed the permission
read against the resource the ACL is attached to.

ACL An access control list. An ACL is a sequence of ACE tuples. An ACL is attached to a resource
instance. An example of an ACL is [ (Allow, 'bob', 'read'), (Deny, 'fred',
'write')]. If an ACL is attached to a resource instance, and that resource is findable via the
context resource, it will be consulted any active security policy to determine whether a particular
request can be fulfilled given the authentication information in the request.

action Represents a pending configuration statement generated by a call to a configuration directive. The
set of pending configuration actions are processed when pyramid.config.Configurator.
commit() is called.

add-on A Python distribution that uses Pyramid’s extensibility to plug into a Pyramid application and
provide extra, configurable services.

Agendaless Consulting A consulting organization formed by Paul Everitt, Tres Seaver, and Chris Mc-
Donough.

See also:

See also Agendaless Consulting.

Akhet Akhet is a Pyramid library and demo application with a Pylons-like feel. It’s most known for its
former application scaffold, which helped users transition from Pylons and those preferring a more
Pylons-like API. The scaffold has been retired but the demo plays a similar role.

application registry A registry of configuration information consulted by Pyramid while servicing an ap-
plication. An application registry maps resource types to views, as well as housing other application-
specific component registrations. Every Pyramid application has one (and only one) application
registry.

asset Any file contained within a Python package which is not a Python source code file.

0.7. Glossary and Index 1235


The Pyramid Web Framework, Version 1.9.4

asset descriptor An instance representing an asset specification provided by the pyramid.path.


AssetResolver.resolve() method. It supports the methods and attributes documented in
pyramid.interfaces.IAssetDescriptor.

asset specification A colon-delimited identifier for an asset. The colon separates a Python package name
from a package subpath. For example, the asset specification my.package:static/baz.css
identifies the file named baz.css in the static subdirectory of the my.package Python pack-
age. See Understanding Asset Specifications for more info.

authentication The act of determining that the credentials a user presents during a particular request are
”good”. Authentication in Pyramid is performed via an authentication policy.

authentication policy An authentication policy in Pyramid terms is a bit of code which has an API which
determines the current principal (or principals) associated with a request.

authorization The act of determining whether a user can perform a specific action. In pyramid terms,
this means determining whether, for a given resource, any principal (or principals) associated with
the request have the requisite permission to allow the request to continue. Authorization in Pyramid
is performed via its authorization policy.

authorization policy An authorization policy in Pyramid terms is a bit of code which has an API which
determines whether or not the principals associated with the request can perform an action associated
with a permission, based on the information found on the context resource.

Babel A collection of tools for internationalizing Python applications. Pyramid does not depend on Ba-
bel to operate, but if Babel is installed, additional locale functionality becomes available to your
application.

cache busting A technique used when serving a cacheable static asset in order to force a client to query
the new version of the asset. See Cache Busting for more information.

Chameleon chameleon is an attribute language template compiler which supports the ZPT templating
specification. It is written and maintained by Malthe Borch. It has several extensions, such as
the ability to use bracketed (Mako-style) ${name} syntax. It is also much faster than the reference
implementation of ZPT. Pyramid offers Chameleon templating out of the box in ZPT and text flavors.

configuration declaration An individual method call made to a configuration directive, such as register-
ing a view configuration (via the add_view() method of the configurator) or route configuration
(via the add_route() method of the configurator). A set of configuration declarations is also
implied by the configuration decoration detected by a scan of code in a package.

configuration decoration Metadata implying one or more configuration declaration invocations. Often
set by configuration Python decorator attributes, such as pyramid.view.view_config, aka
@view_config.

1236 Contents
The Pyramid Web Framework, Version 1.9.4

configuration directive A method of the Configurator which causes a configuration action to occur. The
method pyramid.config.Configurator.add_view() is a configuration directive, and
application developers can add their own directives as necessary (see Adding Methods to the Con-
figurator via add_directive).

configurator An object used to do configuration declaration within an application. The most common
configurator is an instance of the pyramid.config.Configurator class.

conflict resolution Pyramid attempts to resolve ambiguous configuration statements made by application
developers via automatic conflict resolution. Automatic conflict resolution is described in Automatic
Conflict Resolution. If Pyramid cannot resolve ambiguous configuration statements, it is possible to
manually resolve them as described in Manually Resolving Conflicts.

console script A script written to the bin (on UNIX, or Scripts on Windows) directory of a Python
installation or virtual environment as the result of running pip install or pip install -e
..

context A resource in the resource tree that is found during traversal or URL dispatch based on URL
data; if it’s found via traversal, it’s usually a resource object that is part of a resource tree; if it’s
found via URL dispatch, it’s an object manufactured on behalf of the route’s ”factory”. A context
resource becomes the subject of a view, and often has security information attached to it. See the
Traversal chapter and the URL Dispatch chapter for more information about how a URL is resolved
to a context resource.

context manager A context manager is an object that defines the runtime context to be estab-
lished when executing a with statement in Python. The context manager handles the entry
into, and the exit from, the desired runtime context for the execution of the block of code.
Context managers are normally invoked using the with statement, but can also be used by
directly invoking their methods. Pyramid adds context managers for pyramid.config.
Configurator, pyramid.interfaces.IRouter.request_context(), pyramid.
paster.bootstrap(), pyramid.scripting.prepare(), and pyramid.testing.
testConfig(). See also the Python documentation for With Statement Context Managers and
PEP 343.

cookiecutter A command-line utility that creates projects from cookiecutters (project templates), e.g.,
creating a Python package project from a Python package project template.

Pyramid cookiecutters include:

• pyramid-cookiecutter-alchemy

• pyramid-cookiecutter-starter

0.7. Glossary and Index 1237


The Pyramid Web Framework, Version 1.9.4

• pyramid-cookiecutter-zodb

New in version 1.8.

See also:

See also scaffold.

coverage A measurement of code coverage, usually expressed as a percentage of which lines of code have
been executed over which lines are executable, typically run during test execution.

CPython The C implementation of the Python language. This is the reference implementation that most
people refer to as simply ”Python”; Jython, Google’s App Engine, and PyPy are examples of non-C
based Python implementations.

CSRF storage policy A utility that implements pyramid.interfaces.ICSRFStoragePolicy


which is responsible for allocating CSRF tokens to a user and verifying that a provided token is
acceptable.

declarative configuration The configuration mode in which you use the combination of configuration
decoration and a scan to configure your Pyramid application.

decorator A wrapper around a Python function or class which accepts the function or class as its first
argument and which returns an arbitrary object. Pyramid provides several decorators, used for con-
figuration and return value modification purposes.

See also:

See also PEP 318.

Default Locale Name The locale name used by an application when no explicit locale name is set. See
Localization-Related Deployment Settings.

default permission A permission which is registered as the default for an entire application. When a
default permission is in effect, every view configuration registered with the system will be effectively
amended with a permission argument that will require that the executing user possess the default
permission in order to successfully execute the associated view callable.

See also:

See also Setting a Default Permission.

1238 Contents
The Pyramid Web Framework, Version 1.9.4

default root factory If an application does not register a root factory at Pyramid configuration time, a
default root factory is used to created the default root object. Use of the default root object is useful in
application which use URL dispatch for all URL-to-view code mappings, and does not (knowingly)
use traversal otherwise.

Default view The default view of a resource is the view invoked when the view name is the empty string
(''). This is the case when traversal exhausts the path elements in the PATH_INFO of a request
before it returns a context resource.

Deployment settings Deployment settings are settings passed to the Configurator as a settings argu-
ment. These are later accessible via a request.registry.settings dictionary in views or
as config.registry.settings in configuration code. Deployment settings can be used as
global application values.

discriminator The unique identifier of an action.

distribute Distribute is a fork of setuptools which runs on both Python 2 and Python 3.

distribution (Setuptools/distutils terminology). A file representing an installable library or application.


Distributions are usually files that have the suffix of .egg, .tar.gz, or .zip. Distributions are
the target of Setuptools-related commands such as easy_install.

distutils The standard system for packaging and distributing Python packages. See https://docs.python.
org/2/distutils/index.html for more information. setuptools is actually an extension of the Distutils.

Django A full-featured Python web framework.

domain model Persistent data related to your application. For example, data stored in a relational
database. In some applications, the resource tree acts as the domain model.

dotted Python name A reference to a Python object by name using a string, in the form path.to.
modulename:attributename. Often used in Pyramid and setuptools configurations. A vari-
ant is used in dotted names within configurator method arguments that name objects (such as the
”add_view” method’s ”view” and ”context” attributes): the colon (:) is not used; in its place is a
dot.

entry point A setuptools indirection, defined within a setuptools distribution setup.py. It is usually a
name which refers to a function somewhere in a package which is held by the distribution.

event An object broadcast to zero or more subscriber callables during normal Pyramid system operations
during the lifetime of an application. Application code can subscribe to these events by using the
subscriber functionality described in Using Events.

0.7. Glossary and Index 1239


The Pyramid Web Framework, Version 1.9.4

exception response A response that is generated as the result of a raised exception being caught by an
exception view.

Exception view An exception view is a view callable which may be invoked by Pyramid when an excep-
tion is raised during request processing. See Custom Exception Views for more information.

execution policy A policy which wraps the router by creating the request object and sending it through
the request pipeline. See pyramid.config.Configurator.set_execution_policy.

falsey string A string represeting a value of False. Acceptable values are f, false, n, no, off and
0.

finished callback A user-defined callback executed by the router unconditionally at the very end of re-
quest processing . See Using Finished Callbacks.

Forbidden view An exception view invoked by Pyramid when the developer explicitly raises a pyramid.
httpexceptions.HTTPForbidden exception from within view code or root factory code, or
when the view configuration and authorization policy found for a request disallows a particular view
invocation. Pyramid provides a default implementation of a forbidden view; it can be overridden.
See Changing the Forbidden View.

Genshi An XML templating language by Christopher Lenz.

Gettext The GNU gettext library, used by the Pyramid translation machinery.

global state A set of values that are available to the entirety of a program.

Google App Engine Google App Engine (aka ”GAE”) is a Python application hosting service offered by
Google. Pyramid runs on GAE.

Green Unicorn Aka gunicorn, a fast WSGI server that runs on UNIX under Python 2.6+ or Python
3.1+. See http://gunicorn.org/ for detailed information.

Grok A web framework based on Zope 3.

HTTP Exception The set of exception classes defined in pyramid.httpexceptions. These can be
used to generate responses with various status codes when raised or returned from a view callable.

See also:

See also HTTP Exceptions.

1240 Contents
The Pyramid Web Framework, Version 1.9.4

immutable In Python, a value is immutable if it cannot be changed. The Python str, int, and tuple
data types are all immutable.

imperative configuration The configuration mode in which you use Python to call methods on a Config-
urator in order to add each configuration declaration required by your application.

import time In Python, the moment when a module is referred to in an import statement. At this
moment, all statements in that module at the module scope (at the left margin) are executed. It is a
bad design decision to put statements in a Python module that have side effects at import time.

interface A Zope interface object. In Pyramid, an interface may be attached to a resource object or a
request object in order to identify that the object is ”of a type”. Interfaces are used internally by
Pyramid to perform view lookups and other policy lookups. The ability to make use of an interface
is exposed to an application programmers during view configuration via the context argument,
the request_type argument and the containment argument. Interfaces are also exposed to
application developers when they make use of the event system. Fundamentally, Pyramid program-
mers can think of an interface as something that they can attach to an object that stamps it with a
”type” unrelated to its underlying Python type. Interfaces can also be used to describe the behavior
of an object (its methods and attributes), but unless they choose to, Pyramid programmers do not
need to understand or use this feature of interfaces.

Internationalization The act of creating software with a user interface that can potentially be displayed
in more than one language or cultural context. Often shortened to ”i18n” (because the word ”inter-
nationalization” is I, 18 letters, then N).

See also:

See also Localization.

introspectable An object which implements the attributes and methods described in pyramid.
interfaces.IIntrospectable. Introspectables are used by the introspector to display con-
figuration information about a running Pyramid application. An introspectable is associated with a
action by virtue of the pyramid.config.Configurator.action() method.

introspector An object with the methods described by pyramid.interfaces.IIntrospector


that is available in both configuration code (for registration) and at runtime (for querying) that allows
a developer to introspect configuration statements and relationships between those statements.

Jinja2 A text templating language by Armin Ronacher.

jQuery A popular Javascript library.

JSON JavaScript Object Notation is a data serialization format.

0.7. Glossary and Index 1241


The Pyramid Web Framework, Version 1.9.4

Jython A Python implementation written for the Java Virtual Machine.

lineage An ordered sequence of objects based on a ”location -aware” resource. The lineage of any given
resource is composed of itself, its parent, its parent’s parent, and so on. The order of the sequence
is resource-first, then the parent of the resource, then its parent’s parent, and so on. The parent of a
resource in a lineage is available as its __parent__ attribute.

Lingua A package by Wichert Akkerman which provides the pot-create command to extract trans-
lateable messages from Python sources and Chameleon ZPT template files.

Locale Name A string like en, en_US, de, or de_AT which uniquely identifies a particular locale.

Locale Negotiator An object supplying a policy determining which locale name best repre-
sents a given request. It is used by the pyramid.i18n.get_locale_name(), and
pyramid.i18n.negotiate_locale_name() functions, and indirectly by pyramid.
i18n.get_localizer(). The pyramid.i18n.default_locale_negotiator()
function is an example of a locale negotiator.

Localization The process of displaying the user interface of an internationalized application in a particular
language or cultural context. Often shortened to ”l10” (because the word ”localization” is L, 10
letters, then N).

See also:

See also Internationalization.

Localizer An instance of the class pyramid.i18n.Localizer which provides translation and plu-
ralization services to an application. It is retrieved via the pyramid.i18n.get_localizer()
function.

location The path to an object in a resource tree. See Location-Aware Resources for more information
about how to make a resource object location-aware.

Mako Mako is a template language which refines the familiar ideas of componentized layout and inheri-
tance using Python with Python scoping and calling semantics.

matchdict The dictionary attached to the request object as request.matchdict when a URL dis-
patch route has been matched. Its keys are names as identified within the route pattern; its values
are the values matched by each pattern name.

Message Catalog A gettext .mo file containing translations.

1242 Contents
The Pyramid Web Framework, Version 1.9.4

Message Identifier A string used as a translation lookup key during localization. The msgid argument
to a translation string is a message identifier. Message identifiers are also present in a message
catalog.

METAL Macro Expansion for TAL, a part of ZPT which makes it possible to share common look and
feel between templates.

middleware Middleware is a WSGI concept. It is a WSGI component that acts both as a server and an
application. Interesting uses for middleware exist, such as caching, content-transport encoding, and
other functions. See WSGI documentation or PyPI to find middleware for your application.

mod_wsgi mod_wsgi is an Apache module developed by Graham Dumpleton. It allows WSGI applica-
tions (such as applications developed using Pyramid) to be served using the Apache web server.

module A Python source file; a file on the filesystem that typically ends with the extension .py or .pyc.
Modules often live in a package.

multidict An ordered dictionary that can have multiple values for each key. Adds the methods getall,
getone, mixed, add and dict_of_lists to the normal dictionary interface. See Multidict
and pyramid.interfaces.IMultiDict.

mutable In Python, a value is mutable if it can be changed in place. The Python list and dict types
are mutable. When a value is added to or removed from an instance of either, the original object
remains. The opposite of mutable is immutable.

Not Found View An exception view invoked by Pyramid when the developer explicitly raises a
pyramid.httpexceptions.HTTPNotFound exception from within view code or root fac-
tory code, or when the current request doesn’t match any view configuration. Pyramid provides a
default implementation of a Not Found View; it can be overridden. See Changing the Not Found
View.

package A directory on disk which contains an __init__.py file, making it recognizable to Python as
a location which can be import -ed. A package exists to contain module files.

PasteDeploy PasteDeploy is a library used by Pyramid which makes it possible to configure WSGI com-
ponents together declaratively within an .ini file. It was developed by Ian Bicking.

permission A string or Unicode object that represents an action being taken against a context resource.
A permission is associated with a view name and a resource type by the developer. Resources are
decorated with security declarations (e.g. an ACL), which reference these tokens also. Permissions
are used by the active security policy to match the view permission against the resources’s statements
about which permissions are granted to which principal in a context in order to answer the question
”is this user allowed to do this”. Examples of permissions: read, or view_blog_entries.

0.7. Glossary and Index 1243


The Pyramid Web Framework, Version 1.9.4

physical path The path required by a traversal which resolve a resource starting from the physical root.
For example, the physical path of the abc subobject of the physical root object is /abc. Physical
paths can also be specified as tuples where the first element is the empty string (representing the
root), and every other element is a Unicode object, e.g. ('', 'abc'). Physical paths are also
sometimes called ”traversal paths”.

physical root The object returned by the application root factory. Unlike the virtual root of a request, it
is not impacted by Virtual Hosting: it will always be the actual object returned by the root factory,
never a subobject.

pip The Python Packaging Authority’s recommended tool for installing Python packages.

pipeline The PasteDeploy term for a single configuration of a WSGI server, a WSGI application, with a
set of middleware in-between.

pkg_resources A module which ships with setuptools and distribute that provides an API for addressing
”asset files” within a Python package. Asset files are static files, template files, etc; basically anything
non-Python-source that lives in a Python package can be considered a asset file.

See also:

See also PkgResources.

plaster plaster is a library used by Pyramid which acts as an abstraction between command-line scripts
and the file format used to load the WSGI components and application settings. By default Pyramid
ships with the plaster_pastedeploy library installed which provides integrated support for
loading a PasteDeploy INI file.

predicate A test which returns True or False. Two different types of predicates exist in Pyramid: a
view predicate and a route predicate. View predicates are attached to view configuration and route
predicates are attached to route configuration.

predicate factory A callable which is used by a third party during the registration of a route, view, or
subscriber predicates to extend the configuration system. See Adding a Third Party View, Route, or
Subscriber Predicate for more information.

pregenerator A pregenerator is a function associated by a developer with a route. It is called by


route_url() in order to adjust the set of arguments passed to it by the user for special pur-
poses. It will influence the URL returned by route_url(). See pyramid.interfaces.
IRoutePregenerator for more information.

principal A principal is a string or Unicode object representing an entity, typically a user or group. Prin-
cipals are provided by an authentication policy. For example, if a user has the userid bob, and is
a member of two groups named group foo and group bar, then the request might have information
attached to it indicating that Bob was represented by three principals: bob, group foo and group bar.

1244 Contents
The Pyramid Web Framework, Version 1.9.4

project (Setuptools/distutils terminology). A directory on disk which contains a setup.py file and
one or more Python packages. The setup.py file contains code that allows the package(s) to be
installed, distributed, and tested.

Pylons A lightweight Python web framework and a predecessor of Pyramid.

PyPI The Python Package Index, a collection of software available for Python.

PyPy PyPy is an ”alternative implementation of the Python language”: http://pypy.org/

Pyramid Community Cookbook Additional, community-based documentation for Pyramid which


presents topical, practical uses of Pyramid: Pyramid Community Cookbook

pyramid_debugtoolbar A Pyramid add-on which displays a helpful debug toolbar ”on top of” HTML
pages rendered by your application, displaying request, routing, and database information.
pyramid_debugtoolbar is configured into the development.ini of all applications which
use a Pyramid cookiecutter. For more information, see https://docs.pylonsproject.org/projects/
pyramid_debugtoolbar/en/latest/.

pyramid_exclog A package which logs Pyramid application exception (error) information to a standard
Python logger. This add-on is most useful when used in production applications, because the logger
can be configured to log to a file, to UNIX syslog, to the Windows Event Log, or even to email. See
its documentation.

pyramid_handlers An add-on package which allows Pyramid users to create classes that are analogues
of Pylons 1 ”controllers”. See https://docs.pylonsproject.org/projects/pyramid_handlers/en/latest/.

pyramid_jinja2 Jinja2 templating system bindings for Pyramid, documented at https://docs.


pylonsproject.org/projects/pyramid_jinja2/en/latest/. This package also includes a scaffold
named pyramid_jinja2_starter, which creates an application package based on the Jinja2
templating system.

pyramid_redis_sessions A package by Eric Rasmussen which allows you to store Pyramid session data
in a Redis database. See https://pypi.org/project/pyramid_redis_sessions/ for more information.

pyramid_zcml An add-on package to Pyramid which allows applications to be configured via ZCML. It is
available on PyPI. If you use pyramid_zcml, you can use ZCML as an alternative to imperative
configuration or configuration decoration.

Python The programming language in which Pyramid is written.

Python Packaging Authority The Python Packaging Authority (PyPA) is a working group that maintains
many of the relevant projects in Python packaging.

0.7. Glossary and Index 1245


The Pyramid Web Framework, Version 1.9.4

pyvenv The Python Packaging Authority formerly recommended using the pyvenv command for creat-
ing virtual environments on Python 3.4 and 3.5, but it was deprecated in 3.6 in favor of python3
-m venv on UNIX or python -m venv on Windows, which is backward compatible on Python
3.3 and greater.

renderer A serializer which converts non-Response return values from a view into a string, and ultimately
into a response, usually through view configuration. Using a renderer can make writing views that
require templating or other serialization, like JSON, less tedious. See Writing View Callables Which
Use a Renderer for more information.

renderer factory A factory which creates a renderer. See Adding and Changing Renderers for more
information.

renderer globals Values injected as names into a renderer by a pyramid.event.BeforeRender


event.

Repoze ”Repoze” is essentially a ”brand” of software developed by Agendaless Consulting and a set of
contributors. The term has no special intrinsic meaning. The project’s website has more information.
The software developed ”under the brand” is available in a Subversion repository. Pyramid was
originally known as repoze.bfg.

repoze.catalog An indexing and search facility (fielded and full-text) based on zope.index. See the doc-
umentation for more information.

repoze.lemonade Zope2 CMF-like data structures and helper facilities for CA-and-ZODB-based appli-
cations useful within Pyramid applications.

repoze.who Authentication middleware for WSGI applications. It can be used by Pyramid to provide
authentication information.

repoze.workflow Barebones workflow for Python apps . It can be used by Pyramid to form a workflow
system.

request An object that represents an HTTP request, usually an instance of the pyramid.request.
Request class. See Request and Response Objects (narrative) and pyramid.request (API docu-
mentation) for information about request objects.

request factory An object which, provided a WSGI environment as a single positional argument, returns
a Pyramid-compatible request.

request type An attribute of a request that allows for specialization of view invocation based on arbitrary
categorization. The every request object that Pyramid generates and manipulates has one or more
interface objects attached to it. The default interface attached to a request object is pyramid.
interfaces.IRequest.

1246 Contents
The Pyramid Web Framework, Version 1.9.4

resource An object representing a node in the resource tree of an application. If traversal is used, a
resource is an element in the resource tree traversed by the system. When traversal is used, a resource
becomes the context of a view. If url dispatch is used, a single resource is generated for each request
and is used as the context resource of a view.

Resource Location The act of locating a context resource given a request. Traversal and URL dispatch
are the resource location subsystems used by Pyramid.

resource tree A nested set of dictionary-like objects, each of which is a resource. The act of traversal
uses the resource tree to find a context resource.

response An object returned by a view callable that represents response data returned to the requesting
user agent. It must implement the pyramid.interfaces.IResponse interface. A response
object is typically an instance of the pyramid.response.Response class or a subclass such
as pyramid.httpexceptions.HTTPFound. See Request and Response Objects for infor-
mation about response objects.

response adapter A callable which accepts an arbitrary object and ”converts” it to a pyramid.
response.Response object. See Changing How Pyramid Treats View Responses for more
information.

response callback A user-defined callback executed by the router at a point after a response object is
successfully created.

See also:

See also Using Response Callbacks.

response factory An object which, provided a request as a single positional argument, returns a Pyramid-
compatible response. See pyramid.interfaces.IResponseFactory.

reStructuredText A plain text markup format that is the defacto standard for documenting Python
projects. The Pyramid documentation is written in reStructuredText.

root The object at which traversal begins when Pyramid searches for a context resource (for URL Dis-
patch, the root is always the context resource unless the traverse= argument is used in route
configuration).

root factory The ”root factory” of a Pyramid application is called on every request sent to the application.
The root factory returns the traversal root of an application. It is conventionally named get_root.
An application may supply a root factory to Pyramid during the construction of a Configurator. If a
root factory is not supplied, the application creates a default root object using the default root factory.

0.7. Glossary and Index 1247


The Pyramid Web Framework, Version 1.9.4

route A single pattern matched by the url dispatch subsystem, which generally resolves to a root factory
(and then ultimately a view).

See also:

See also url dispatch.

route configuration Route configuration is the act of associating request parameters with a particular
route using pattern matching and route predicate statements. See URL Dispatch for more informa-
tion about route configuration.

route predicate An argument to a route configuration which implies a value that evaluates to True or
False for a given request. All predicates attached to a route configuration must evaluate to True
for the associated route to ”match” the current request. If a route does not match the current request,
the next route (in definition order) is attempted.

router The WSGI application created when you start a Pyramid application. The router intercepts re-
quests, invokes traversal and/or URL dispatch, calls view functions, and returns responses to the
WSGI server on behalf of your Pyramid application.

Routes A system by Ben Bangert which parses URLs and compares them against a number of user defined
mappings. The URL pattern matching syntax in Pyramid is inspired by the Routes syntax (which
was inspired by Ruby On Rails pattern syntax).

routes mapper An object which compares path information from a request to an ordered set of route
patterns. See URL Dispatch.

scaffold A project template that generates some of the major parts of a Pyramid application and helps
users to quickly get started writing larger applications. Scaffolds are usually used via the pcreate
command.

Deprecated since version 1.8.

See also:

See also cookiecutter.

scan The term used by Pyramid to define the process of importing and examining all code in a Python
package or module for configuration decoration.

session A namespace that is valid for some period of continual activity that can be used to represent a
user’s interaction with a web application.

1248 Contents
The Pyramid Web Framework, Version 1.9.4

session factory A callable, which, when called with a single argument named request (a request ob-
ject), returns a session object. See Using the Default Session Factory, Using Alternate Session Fac-
tories and pyramid.config.Configurator.set_session_factory() for more infor-
mation.

setuptools Setuptools builds on Python’s distutils to provide easier building, distribution, and in-
stallation of libraries and applications. As of this writing, setuptools runs under Python 2, but not
under Python 3. You can use distribute under Python 3 instead.

side effect A statement or function has a side effect when it changes a value outside its own scope. Put
another way, if one can observe the change made by a function from outside that function, it has a
side effect.

singleton A singleton is a class which will only ever have one instance. As there is only one, it is shared
by all other code. This makes it an example of global state.

Using a singleton is considered a poor design choice. As mutable global state, it can be changed by
any other code, and so the values it represents cannot be reasoned about or tested properly.

SQLAlchemy SQLAlchemy is an object relational mapper used in tutorials within this documentation.

subpath A list of element ”left over” after the router has performed a successful traversal to a view.
The subpath is a sequence of strings, e.g. ['left', 'over', 'names']. Within Pyramid
applications that use URL dispatch rather than traversal, you can use *subpath in the route pattern
to influence the subpath. See Using *subpath in a Route Pattern for more information.

subscriber A callable which receives an event. A callable becomes a subscriber via imperative configu-
ration or via configuration decoration. See Using Events for more information.

template A file with replaceable parts that is capable of representing some text, XML, or HTML when
rendered.

thread local A thread-local variable is one which is essentially a global variable in terms of how it is
accessed and treated, however, each thread used by the application may have a different value for
this same ”global” variable. Pyramid uses a small number of thread local variables, as described in
Thread Locals.

See also:

See also the stdlib documentation for more information.

Translation Context A string representing the ”context” in which a translation was made within a given
translation domain. See the gettext documentation, 11.2.5 Using contexts for solving ambiguities
for more information.

0.7. Glossary and Index 1249


The Pyramid Web Framework, Version 1.9.4

Translation Directory A translation directory is a gettext translation directory. It contains language fold-
ers, which themselves contain LC_MESSAGES folders, which contain .mo files. Each .mo file rep-
resents a set of translations for a language in a translation domain. The name of the .mo file (minus
the .mo extension) is the translation domain name.

Translation Domain A string representing the ”context” in which a translation was made. For example
the word ”java” might be translated differently if the translation domain is ”programming-languages”
than would be if the translation domain was ”coffee”. A translation domain is represented by a
collection of .mo files within one or more translation directory directories.

Translation String An instance of pyramid.i18n.TranslationString, which is a class that be-


haves like a Unicode string, but has several extra attributes such as domain, msgid, and mapping
for use during translation. Translation strings are usually created by hand within software, but are
sometimes created on the behalf of the system for automatic template translation. For more infor-
mation, see Internationalization and Localization.

Translator A callable which receives a translation string and returns a translated Unicode object for the
purposes of internationalization. A localizer supplies a translator to a Pyramid application accessible
via its translate method.

traversal The act of descending ”up” a tree of resource objects from a root resource in order to find a
context resource. The Pyramid router performs traversal of resource objects when a root factory is
specified. See the Traversal chapter for more information. Traversal can be performed instead of
URL dispatch or can be combined with URL dispatch. See Combining Traversal and URL Dispatch
for more information about combining traversal and URL dispatch (advanced).

truthy string A string represeting a value of True. Acceptable values are t, true, y, yes, on and 1.

tween A bit of code that sits between the Pyramid router’s main request handling function and the up-
stream WSGI component that uses Pyramid as its ’app’. The word ”tween” is a contraction of ”be-
tween”. A tween may be used by Pyramid framework extensions, to provide, for example, Pyramid-
specific view timing support, bookkeeping code that examines exceptions before they are returned to
the upstream WSGI application, or a variety of other features. Tweens behave a bit like WSGI mid-
dleware but they have the benefit of running in a context in which they have access to the Pyramid
application registry as well as the Pyramid rendering machinery. See Registering Tweens.

URL dispatch An alternative to traversal as a mechanism for locating a context resource for a view. When
you use a route in your Pyramid application via a route configuration, you are using URL dispatch.
See the URL Dispatch for more information.

userid A userid is a string or Unicode object used to identify and authenticate a real-world user or client.
A userid is supplied to an authentication policy in order to discover the user’s principals. In the
authentication policies which Pyramid provides, the default behavior returns the user’s userid as a
principal, but this is not strictly necessary in custom policies that define their principals differently.

1250 Contents
The Pyramid Web Framework, Version 1.9.4

Venusian Venusian is a library which allows framework authors to defer decorator actions. Instead of
taking actions when a function (or class) decorator is executed at import time, the action usually
taken by the decorator is deferred until a separate ”scan” phase. Pyramid relies on Venusian to
provide a basis for its scan feature.

venv The Python Packaging Authority’s recommended tool for creating virtual environments on Python
3.3 and greater.

Note: whenever you encounter commands prefixed with $VENV (Unix) or %VENV (Windows), know
that that is the environment variable whose value is the root of the virtual environment in question.

view Common vernacular for a view callable.

view callable A ”view callable” is a callable Python object which is associated with a view configuration;
it returns a response object . A view callable accepts a single argument: request, which will be
an instance of a request object. An alternate calling convention allows a view to be defined as a
callable which accepts a pair of arguments: context and request: this calling convention is
useful for traversal-based applications in which a context is always very important. A view callable
is the primary mechanism by which a developer writes user interface code within Pyramid. See
Views for more information about Pyramid view callables.

view configuration View configuration is the act of associating a view callable with configuration infor-
mation. This configuration information helps map a given request to a particular view callable and it
can influence the response of a view callable. Pyramid views can be configured via imperative con-
figuration, or by a special @view_config decorator coupled with a scan. See View Configuration
for more information about view configuration.

view deriver A view deriver is a composable component of the view pipeline which is used to cre-
ate a view callable. A view deriver is a callable implementing the pyramid.interfaces.
IViewDeriver interface. Examples of built-in derivers including view mapper, the permission
checker, and applying a renderer to a dictionary returned from the view.

View handler A view handler ties together pyramid.config.Configurator.add_route()


and pyramid.config.Configurator.add_view() to make it more convenient to register
a collection of views as a single class when using url dispatch. View handlers ship as part of the
pyramid_handlers add-on package.

View Lookup The act of finding and invoking the ”best” view callable, given a request and a context
resource.

view mapper A view mapper is a class which implements the pyramid.interfaces.


IViewMapperFactory interface, which performs view argument and return value mapping.
This is a plug point for extension builders, not normally used by ”civilians”.

0.7. Glossary and Index 1251


The Pyramid Web Framework, Version 1.9.4

view name The ”URL name” of a view, e.g index.html. If a view is configured without a name, its
name is considered to be the empty string (which implies the default view).

view predicate An argument to a view configuration which evaluates to True or False for a given
request. All predicates attached to a view configuration must evaluate to true for the associated view
to be considered as a possible callable for a given request.

virtual environment An isolated Python environment that allows packages to be installed for use by a
particular application, rather than being installed system wide.

virtual root A resource object representing the ”virtual” root of a request; this is typically the physical
root object unless Virtual Hosting is in use.

virtualenv The virtualenv tool that allows one to create virtual environments. In Python 3.3 and greater,
venv is the preferred tool.

Note: whenever you encounter commands prefixed with $VENV (Unix) or %VENV (Windows), know
that that is the environment variable whose value is the root of the virtual environment in question.

Waitress A WSGI server that runs on UNIX and Windows under Python 2.7+ and Python 3.3+. Projects
generated via Pyramid cookiecutters use Waitress as a WGSI server. See https://docs.pylonsproject.
org/projects/waitress/en/latest/ for detailed information.

WebOb WebOb is a WSGI request/response library created by Ian Bicking.

WebTest WebTest is a package which can help you write functional tests for your WSGI application.

WSGI Web Server Gateway Interface. This is a Python standard for connecting web applications to web
servers, similar to the concept of Java Servlets. Pyramid requires that your application be served as
a WSGI application.

ZCML Zope Configuration Markup Language, an XML dialect used by Zope and pyramid_zcml for con-
figuration tasks.

ZODB Zope Object Database, a persistent Python object store.

Zope The Z Object Publishing Framework, a full-featured Python web framework.

Zope Component Architecture The Zope Component Architecture (aka ZCA) is a system which allows
for application pluggability and complex dispatching based on objects which implement an inter-
face. Pyramid uses the ZCA ”under the hood” to perform view dispatching and other application
configuration tasks.

ZPT The Zope Page Template templating language.

1252 Contents
Index

Symbols -b, --browser


*subpath pserve command line option, 916
hybrid applications, 626 -d, --display-headers
*traverse route pattern prequest command line option,
hybrid applications, 621 914
--header <name:value> -f <format>, --format <format>
prequest command line option, proutes command line option, 915
914 -g <glob>, --glob <glob>
--ignore-conflicting-name proutes command line option, 915
pcreate command line option, 912 -h, --help
--interactive pcreate command line option, 912
pcreate command line option, 912 pdistreport command line
--list-templates option, 913
pcreate command line option, 912 prequest command line option,
--overwrite 914
pcreate command line option, 912 proutes command line option, 915
--package-name <package_name> pserve command line option, 916
pcreate command line option, 912 pshell command line option, 917
--reload ptweens command line option, 918
pserve command line option, 916 pviews command line option, 919
--reload-interval -l <login>, --login <login>
<reload_interval> prequest command line option,
pserve command line option, 916 914
--server-name <section_name> -l, --list
pserve command line option, 916 pcreate command line option, 912
--setup <setup> -l, --list-shells
pshell command line option, 917 pshell command line option, 917
--simulate -m {GET,HEAD,POST,PUT,PATCH,DELETE,PROPFIND,
pcreate command line option, 912 --method

1253
The Pyramid Web Framework, Version 1.9.4

__getitem__() (IDict method), 817


{GET,HEAD,POST,PUT,PATCH,DELETE,PROPFIND,OPTIONS}
prequest command line option, __hash__() (IIntrospectable method), 824
914 __init__.py, 377
-n <name>, --app-name <name> __iter__() (IDict method), 817
prequest command line option, __new__() (ACLAllowed static method), 885
914 __new__() (ACLDenied static method), 884
pserve command line option, 916 __new__() (Allowed static method), 884
-p <python_shell>, --python-shell __new__() (Denied static method), 883
<python_shell> __setitem__() (IDict method), 817
pshell command line option, 917 __str__() (IActionInfo method), 827
-q, --quiet
pserve command line option, 916 A
-s <scaffold_name>, --scaffold absolute_asset_spec() (Configurator
<scaffold_name> method), 776
pcreate command line option, 912 abspath() (IAssetDescriptor method), 827
-s <server_type>, --server absspec() (IAssetDescriptor method), 827
<server_type> accept (Request attribute), 861
pserve command line option, 916 accept_charset (Request attribute), 861
-t <scaffold_name>, --template accept_encoding (Request attribute), 861
<scaffold_name> accept_language (Request attribute), 861
pcreate command line option, 912 accept_ranges (IResponse attribute), 819
-v, --verbose accept_ranges (Response attribute), 871
pserve command line option, 916 access control entry, 606
.ini access control list, 604
logging, 511 ACE, 1235
middleware, 516 ACE, 606
settings, 385 ACE (special), 608
$VENV/bin/pip vs. source ACL, 1235
bin/activate, 349 ACL, 604
__call__() (ICacheBuster method), 828 resource, 604
__call__() (IRenderer method), 815 ACL inheritance, 609
__call__() (IRendererFactory method), 815 ACLAllowed (class in pyramid.security), 885
__call__() (IRequestFactory method), 816 ACLAuthorizationPolicy (class in pyra-
__call__() (IResponse method), 819 mid.authorization), 731
__call__() (IResponseFactory method), 816 ACLDenied (class in pyramid.security), 884
__call__() (IRoutePregenerator method), 812 action, 1235
__call__() (ISessionFactory method), 814 action() (Configurator method), 773
__call__() (IViewDeriver method), 828 action_info (IIntrospectable attribute), 824
__call__() (IViewMapper method), 817 activating
__call__() (IViewMapperFactory method), translation, 557
817 add() (IIntrospector method), 826
__contains__() (IDict method), 817 add() (IMultiDict method), 818
__delitem__() (IDict method), 817 add-on, 1235

1254 Index
The Pyramid Web Framework, Version 1.9.4

add_adapter() (JSON method), 839 add_view_predicate() (Configurator


add_adapter() (JSONP method), 841 method), 770
add_directive, 695 adding
add_directive() (Configurator method), 774 renderer, 437
add_exception_view() (Configurator translation directory, 557
method), 759 adding directives
add_finished_callback() (Request configurator, 695
method), 848 adding renderer globals, 642
add_forbidden_view() (Configurator advanced
method), 758 configuration, 687
add_notfound_view() (Configurator age (IResponse attribute), 819
method), 757 age (Response attribute), 871
add_permission() (Configurator method), Agendaless Consulting, 1235
762 Agendaless Consulting, 327
add_renderer() (Configurator method), 766 Akhet, 1235
add_request_method() (Configurator Akkerman, Wichert, 11
method), 762 ALL_PERMISSIONS (in module pyra-
add_resource_url_adapter() (Configura- mid.security), 883
tor method), 766 Allow (in module pyramid.security), 883
add_response_adapter() (Configurator allow (IResponse attribute), 819
method), 766 allow (Response attribute), 871
add_response_callback() (Request Allowed (class in pyramid.security), 884
method), 847 app (IApplicationCreated attribute), 808
add_route, 395 app_iter (IResponse attribute), 820
add_route() (Configurator method), 742 app_iter (Response attribute), 871
add_route_predicate() (Configurator app_iter_range() (IResponse method), 820
method), 769 app_iter_range() (Response method), 871
add_settings() (Configurator method), 765 application configuration, 356
add_static_view, 470 application registry, 1235
add_static_view() (Configurator method), application registry, 715
746 application_url (Request attribute), 862
add_subscriber() (Configurator method), ApplicationCreated (class in pyra-
759 mid.events), 786
add_subscriber_predicate() (Configura- apply_request_extensions() (in module
tor method), 770 pyramid.request), 870
add_translation_dirs() (Configurator as_bytes() (Request method), 862
method), 763 asbool() (in module pyramid.settings), 890
add_traverser() (Configurator method), 767 ascii_native_() (in module pyra-
add_tween() (Configurator method), 768 mid.compat), 732
add_view, 462 aslist() (in module pyramid.settings), 890
add_view() (Configurator method), 747 assert_() (DummyTemplateRenderer method),
add_view_deriver() (Configurator method), 896
770 asset, 1235

Index 1255
The Pyramid Web Framework, Version 1.9.4

asset descriptor, 1236 automatic reloading of templates,


asset specification, 1236 447
asset specifications, 469
AssetResolver (class in pyramid.path), 833 B
assets, 468 Babel, 1236
generating urls, 471 Babel, 554
overriding, 480, 686 BadCSRFOrigin, 789
serving, 470 BadCSRFToken, 789
Authenticated (in module pyramid.security), Bangert, Ben, 11
883 BaseCookieSessionFactory() (in module
authenticated_userid (Request attribute), pyramid.session), 889
844 BasicAuthAuthenticationPolicy (class
authenticated_userid() (AuthTktAuthen- in pyramid.authentication), 726
ticationPolicy method), 722 Beelby, Chris, 11
authenticated_userid() (BasicAuthAu- before render event, 642
thenticationPolicy method), 727 BeforeRender (class in pyramid.events), 787
authenticated_userid() (IAuthentication- BeforeTraversal (class in pyramid.events),
Policy method), 810 786
authenticated_userid() (in module pyra- begin() (Configurator method), 738
mid.security), 881 Bicking, Ian, 11, 483
authenticated_userid() (RemoteUser- binary_type (in module pyramid.compat), 732
AuthenticationPolicy method), 724 blank() (IRequestFactory method), 816
authenticated_userid() (Repoze- blank() (pyramid.request.Request class method),
Who1AuthenticationPolicy method), 862
728 body (IResponse attribute), 820
authenticated_userid() (SessionAuthenti- body (Request attribute), 862
cationPolicy method), 725 body (Response attribute), 871
authentication, 1236 body_file (IResponse attribute), 820
authentication policy, 1236 body_file (Request attribute), 862
authentication policy (creating), 611 body_file (Response attribute), 871
authentication policy (extending), 610 body_file_raw (Request attribute), 862
authorization, 1236 body_file_seekable (Request attribute), 862
authorization (Request attribute), 862 book audience, 9
authorization policy, 1236 book content overview, 10
authorization policy, 602 bootstrap() (in module pyramid.paster), 830
authorization policy (creating), 613 Borch, Malthe, 11
AuthTktAuthenticationPolicy (class in Brandl, Georg, 11
pyramid.authentication), 719 built-in renderers, 431
AuthTktCookieHelper (class in pyra- bytes_() (in module pyramid.compat), 732
mid.authentication), 729
AuthTktCookieHelper.AuthTicket C
(class in pyramid.authentication), 729 Cache Busting, 474
AuthTktCookieHelper.BadTicket, 730 cache busting, 1236

1256 Index
The Pyramid Web Framework, Version 1.9.4

cache_control (IResponse attribute), 820 method), 820


cache_control (Request attribute), 862 conditional_response_app() (Response
cache_control (Response attribute), 871 method), 871
cache_expires (IResponse attribute), 820 config_uri
call_application() (Request method), 862 prequest command line option,
CALLER_PACKAGE (in module pyramid.path), 914
832 proutes command line option, 915
categories() (IIntrospector method), 825 pserve command line option, 916
categorized() (IIntrospector method), 825 pshell command line option, 917
category_name (IIntrospectable attribute), 824 ptweens command line option, 918
Chameleon, 1236 pviews command line option, 919
Chameleon, 448 config_vars
translation strings, 554 prequest command line option,
changed() (ISession method), 814 914
changing proutes command line option, 915
renderer, 439 pserve command line option, 916
charset (IResponse attribute), 820 pshell command line option, 917
charset (Response attribute), 871 ptweens command line option, 918
check_csrf_origin() (in module pyra- pviews command line option, 919
mid.csrf ), 782 configparser (in module pyramid.compat),
check_csrf_token() (CookieCSRFStorage- 732
Policy method), 782 configuration
check_csrf_token() (ICSRFStoragePolicy advanced, 687
method), 813 conflict detection, 687
check_csrf_token() (in module pyra- including from external
mid.csrf ), 783 sources, 693
check_csrf_token() (LegacySessionCSRFS- logging, 511
toragePolicy method), 781 middleware, 516
check_csrf_token() (SessionCSRFStorage- configuration declaration, 1236
Policy method), 781 configuration decoration, 1236
class_types (in module pyramid.compat), 732 configuration decoration, 357
cleaning up after request, 488 configuration decorator, 652
cleanUp() (in module pyramid.testing), 895 configuration directive, 1237
clear() (BeforeRender method), 788 ConfigurationError, 790
clear() (IDict method), 818 Configurator, 353
client_addr (Request attribute), 863 configurator, 1237
clone() (DummyResource method), 895 configurator
clone() (IRendererInfo method), 815 adding directives, 695
code scanning, 357 Configurator (class in pyramid.config), 735
commit() (Configurator method), 738 Configurator testing API, 566
compiling conflict detection
message catalog, 550 configuration, 687
conditional_response_app() (IResponse conflict resolution, 1237

Index 1257
The Pyramid Web Framework, Version 1.9.4

console script, 1237 copy_get() (Request method), 864


console script, 539 coverage, 1238
container resources, 571 CPython, 1238
content_disposition (IResponse attribute), created (ISession attribute), 813
820 creating a project, 359
content_disposition (Response attribute), cross-site request forgery
872 attacks, prevention, 615
content_encoding (IResponse attribute), 820 CSRF storage policy, 1238
content_encoding (Response attribute), 872 csrf.get_csrf_token, 615
content_language (IResponse attribute), 820 csrf.new_csrf_token, 616
content_language (Response attribute), 872 current_route_path() (in module pyra-
content_length (IResponse attribute), 821 mid.url), 903
content_length (Request attribute), 863 current_route_path() (Request method),
content_length (Response attribute), 872 852
content_location (IResponse attribute), 821 current_route_url() (in module pyra-
content_location (Response attribute), 872 mid.url), 903
content_md5 (IResponse attribute), 821 current_route_url() (Request method), 851
content_md5 (Response attribute), 872 custom settings, 389
content_range (IResponse attribute), 821
content_range (Response attribute), 872 D
content_type (IResponse attribute), 821 date (IResponse attribute), 821
content_type (Request attribute), 863 date (Request attribute), 864
content_type (Response attribute), 872 date (Response attribute), 873
content_type_params (IResponse attribute), date and currency formatting (i18n),
821 554
content_type_params (Response attribute), de la Guardia, Carlos, 11
872 debug settings, 501
context, 1237 debug toolbar, 367
context, 593 debug_all, 501
context (Request attribute), 842 debug_authorization, 501
context manager, 1237 debug_notfound, 501
ContextFound (class in pyramid.events), 786 debug_routematch, 501
CookieCSRFStoragePolicy (class in pyra- debugging
mid.csrf ), 781 route matching, 411
cookiecutter, 1237 templates, 447
cookiecutter, 359 view configuration, 468
cookiecutters, 359 debugging authorization failures,
cookies (Request attribute), 863 610
copy() (BeforeRender method), 788 debugging not found errors, 467
copy() (IResponse method), 821 declarative configuration, 1238
copy() (Request method), 863 decorator, 1238
copy() (Response method), 873 default
copy_body() (Request method), 864 permission, 604

1258 Index
The Pyramid Web Framework, Version 1.9.4

Default Locale Name, 1238 Duncan, Casey, 11


default permission, 1238
default root factory, 1239 E
Default view, 1239 effective_principals (Request attribute),
default view, 593 844
default_locale_name, 501, 555 effective_principals() (AuthTktAuthen-
default_locale_negotiator() (in mod- ticationPolicy method), 722
ule pyramid.i18n), 807 effective_principals() (BasicAuthAu-
Deferred (class in pyramid.registry), 836 thenticationPolicy method), 727
delete_cookie() (IResponse method), 821 effective_principals() (IAuthentication-
delete_cookie() (Response method), 873 Policy method), 810
Denied (class in pyramid.security), 883 effective_principals() (in module pyra-
Deny (in module pyramid.security), 883 mid.security), 881
DENY_ALL (in module pyramid.security), 883 effective_principals() (RemoteUser-
deployment AuthenticationPolicy method), 724
settings, 389 effective_principals() (Repoze-
Deployment settings, 1239 Who1AuthenticationPolicy method),
derive_view() (Configurator method), 774 728
detecting languages, 556 effective_principals() (SessionAuthenti-
development install, 361 cationPolicy method), 725
dict_of_lists() (IMultiDict method), 819 encode_content() (IResponse method), 821
discriminator, 1239 encode_content() (Response method), 873
discriminator (IIntrospectable attribute), 824 end() (Configurator method), 738
discriminator_hash (IIntrospectable at- entry point, 1239
tribute), 824 environ (IResponse attribute), 821
distribute, 1239 environment variables, 501
distribution, 1239 escape() (in module pyramid.compat), 732
distributions, showing installed, etag (IResponse attribute), 822
535 etag (Response attribute), 873
distutils, 1239 event, 1239
Django, 1239 event, 497
Django, 327, 345 Everitt, Paul, 11
domain Everyone (in module pyramid.security), 883
translation, 545 exc_info (Request attribute), 843
domain (Request attribute), 864 exception (Request attribute), 843
domain model, 1239 exception response, 1240
dotted Python name, 1239 exception responses, 491
DottedNameResolver (class in pyramid.path), Exception view, 1240
832 exception view
DummyRequest (class in pyramid.testing), 895 subrequest, 633
DummyResource (class in pyramid.testing), 895 exception views, 423
DummyTemplateRenderer (class in pyra- exception_only (IViewDeriverInfo attribute),
mid.testing), 896 829

Index 1259
The Pyramid Web Framework, Version 1.9.4

exception_response() (in module pyra- resource, 581


mid.httpexceptions), 794 finding by path
exception_view_config (class in pyra- resource, 576
mid.view), 909 finding root
EXCVIEW (in module pyramid.tweens), 902 resource, 578
excview_tween_factory() (in module finished callback, 1240
pyramid.tweens), 902 finished callback, 644
exec_() (in module pyramid.compat), 732 flash messages, 495
execution policy, 1240 flash(), 495
exists() (IAssetDescriptor method), 827 flash() (ISession method), 814
exists() (ManifestCacheBuster static method), Forbidden (in module pyramid.exceptions), 790
892 Forbidden view, 1240
expires (IResponse attribute), 822 forbidden view, 609, 637
expires (Response attribute), 873 forbidden_view_config (class in pyra-
explicitly calling mid.view), 908
renderer, 334 forget() (AuthTktAuthenticationPolicy
explictly calling method), 723
view renderer, 334 forget() (AuthTktCookieHelper method), 730
extend() (IMultiDict method), 819 forget() (BasicAuthAuthenticationPolicy
extending method), 727
pshell, 527 forget() (IAuthenticationPolicy method), 811
extending an existing application, forget() (in module pyramid.security), 881
684 forget() (RemoteUserAuthenticationPolicy
extending configuration, 694 method), 724
extensible application, 683 forget() (RepozeWho1AuthenticationPolicy
extract_http_basic_credentials() method), 729
(in module pyramid.authentication), 731 forget() (SessionAuthenticationPolicy method),
extracting 726
messages, 549 forms, views, and unicode, 425
framework, 327
F frameworks vs. libraries, 327
factory (IRoute attribute), 812 from_bytes() (pyramid.request.Request class
falsey string, 1240 method), 864
file (IActionInfo attribute), 826 from_file() (pyramid.request.Request class
FileIter (class in pyramid.response), 877 method), 864
FileResponse (class in pyramid.response), 877 from_file() (pyramid.response.Response class
find_interface() (in module pyra- method), 873
mid.traversal), 897 fromkeys() (BeforeRender method), 789
find_resource() (in module pyra- Fulton, Jim, 11
mid.traversal), 897 functional testing, 563
find_root() (in module pyramid.traversal), functional tests, 568
898
finding by interface or class

1260 Index
The Pyramid Web Framework, Version 1.9.4

G getall() (IMultiDict method), 819


generate() (IRoute method), 812 getGlobalSiteManager, 718
generating getmtime() (ManifestCacheBuster static
hybrid URLs, 626 method), 892
resource url, 574 getone() (IMultiDict method), 819
generating route URLs, 407 getSiteManager, 715
generating static asset urls, 471 Gettext, 1240
generating urls Gettext, 548
assets, 471 gettext, 547
Genshi, 1240 getUtility, 715
GET (Request attribute), 860 global state, 1240
get() (BeforeRender method), 789 global views
get() (IDict method), 818 hybrid applications, 625
get() (IIntrospector method), 825 global_registries (in module pyra-
get_app() (in module pyramid.paster), 831 mid.config), 779
get_appsettings() (in module pyra- Google App Engine, 1240
mid.paster), 831 Green Unicorn, 1240
get_category() (IIntrospector method), 825 Grok, 1240
get_csrf_token() (CookieCSRFStoragePol-
icy method), 782
H
get_csrf_token() (ICSRFStoragePolicy Hardwick, Nat, 11
method), 813 has_body (Response attribute), 873
get_csrf_token() (in module pyramid.csrf ), has_permission() (in module pyra-
782 mid.security), 882
get_csrf_token() (LegacySessionCSRFStor- has_permission() (Request method), 846
agePolicy method), 781 Hathaway, Shane, 11
get_csrf_token() (SessionCSRFStoragePol- headerlist (IResponse attribute), 822
icy method), 781 headerlist (Response attribute), 873
get_current_registry, 712, 715, 718 headers (IResponse attribute), 822
get_current_registry() (in module pyra- headers (Request attribute), 865
mid.threadlocal), 897 headers (Response attribute), 873
get_current_request, 712 hello world program, 351
get_current_request() (in module pyra- helloworld (imperative), 353
mid.threadlocal), 897 Holth, Daniel, 11
get_locale_name() (in module pyra- hook_zca (configurator method), 717
mid.i18n), 807 hook_zca() (Configurator method), 776
get_localizer() (in module pyramid.i18n), host (Request attribute), 865
807 host_port (Request attribute), 865
get_renderer() (in module pyra- host_url (Request attribute), 865
mid.renderers), 837 hosting an app under a prefix, 560
get_response() (Request method), 865 HTTP caching, 467
get_root() (in module pyramid.scripting), 880 HTTP Exception, 1240
get_settings() (Configurator method), 765 HTTP exceptions, 421

Index 1261
The Pyramid Web Framework, Version 1.9.4

http redirect (from a view), 425 HTTPResetContent, 796


http_version (Request attribute), 865 HTTPSeeOther, 797
HTTPAccepted, 796 HTTPServerError, 795
HTTPBadGateway, 803 HTTPServiceUnavailable, 803
HTTPBadRequest, 798 HTTPTemporaryRedirect, 798
HTTPBasicCredentials (class in pyra- HTTPUnauthorized, 798
mid.authentication), 730 HTTPUnprocessableEntity, 802
HTTPClientError, 795 HTTPUnsupportedMediaType, 802
HTTPConflict, 800 HTTPUseProxy, 797
HTTPCreated, 795 HTTPVersionNotSupported, 804
HTTPError, 795 hybrid applications, 620
HTTPException, 794 *subpath, 626
HTTPExpectationFailed, 802 *traverse route pattern, 621
HTTPFailedDependency, 803 global views, 625
HTTPForbidden, 798 hybrid URLs
HTTPFound, 797 generating, 626
HTTPGatewayTimeout, 804
HTTPGone, 800 I
HTTPInsufficientStorage, 804 i18n, 544
HTTPInternalServerError, 803 IActionInfo (interface in pyramid.interfaces),
HTTPLengthRequired, 801 826
HTTPLocked, 802 IApplicationCreated (interface in pyra-
HTTPMethodNotAllowed, 799 mid.interfaces), 808
HTTPMovedPermanently, 797 IAssetDescriptor (interface in pyra-
HTTPMultipleChoices, 796 mid.interfaces), 827
HTTPNoContent, 796 IAuthenticationPolicy (interface in pyra-
HTTPNonAuthoritativeInformation, mid.interfaces), 810
796 IAuthorizationPolicy (interface in pyra-
HTTPNotAcceptable, 800 mid.interfaces), 811
HTTPNotFound, 799 IBeforeRender (interface in pyra-
HTTPNotImplemented, 803 mid.interfaces), 809
HTTPNotModified, 797 IBeforeTraversal (interface in pyra-
HTTPOk, 795 mid.interfaces), 809
HTTPPartialContent, 796 ICacheBuster (interface in pyramid.interfaces),
HTTPPaymentRequired, 798 828
HTTPPreconditionFailed, 801 IContextFound (interface in pyra-
HTTPProxyAuthenticationRequired, mid.interfaces), 808
800 ICSRFStoragePolicy (interface in pyra-
HTTPRedirection, 795 mid.interfaces), 813
HTTPRequestEntityTooLarge, 801 identify() (AuthTktCookieHelper method),
HTTPRequestRangeNotSatisfiable, 802 730
HTTPRequestTimeout, 800 IDict (interface in pyramid.interfaces), 817
HTTPRequestURITooLong, 801

1262 Index
The Pyramid Web Framework, Version 1.9.4

IExceptionResponse (interface in pyra- 732


mid.interfaces), 811 integration testing, 563
if_match (Request attribute), 865 integration tests, 568
if_modified_since (Request attribute), 865 interactive shell, 525
if_none_match (Request attribute), 866 interface, 1241
if_range (Request attribute), 866 Internationalization, 1241
if_unmodified_since (Request attribute), internationalization, 544
866 introspectable, 1241
IIntrospectable (interface in pyra- Introspectable (class in pyramid.registry),
mid.interfaces), 823 836
IIntrospector (interface in pyra- introspectable (Configurator attribute), 779
mid.interfaces), 825 introspection, 668
im_func (in module pyramid.compat), 732 introspector, 1241
immutable, 1241 introspector, 668
imperative configuration, 1241 introspector (Configurator attribute), 779
imperative configuration, 353, 356 introspector (Registry attribute), 835
import time, 1241 invalidate() (ISession method), 814
IMultiDict (interface in pyramid.interfaces), invoke_exception_view() (Request
818 method), 846
include() (Configurator method), 739 invoke_request() (IRouter method), 816
including from external sources invoke_subrequest() (Request method), 845
configuration, 693 invoking a request, 533
INewRequest, 497 IRenderer (interface in pyramid.interfaces), 815
INewRequest (interface in pyramid.interfaces), IRendererFactory (interface in pyra-
808 mid.interfaces), 815
INewResponse, 497 IRendererInfo (interface in pyra-
INewResponse (interface in pyramid.interfaces), mid.interfaces), 815
809 IRequestFactory (interface in pyra-
INGRESS (in module pyramid.tweens), 902 mid.interfaces), 815
INGRESS (in module pyramid.viewderivers), 910 IResourceURL (interface in pyramid.interfaces),
ini file, 371 827
ini file settings, 501 IResponse, 648
initializing IResponse (interface in pyramid.interfaces), 819
message catalog, 549 IResponseFactory (interface in pyra-
input_() (in module pyramid.compat), 732 mid.interfaces), 816
inside() (in module pyramid.location), 830 IRoute (interface in pyramid.interfaces), 811
install IRoutePregenerator (interface in pyra-
Python (from package, Windows), 347 mid.interfaces), 812
install preparation, 346 IRouter (interface in pyramid.interfaces), 816
installing on Mac OS X, 349 is_body_readable (Request attribute), 866
installing on UNIX, 349 is_body_seekable (Request attribute), 866
installing on Windows, 350 is_nonstr_iter() (in module pyra-
integer_types (in module pyramid.compat), mid.compat), 732

Index 1263
The Pyramid Web Framework, Version 1.9.4

is_response() (Request method), 866 K


is_xhr (Request attribute), 866 keys() (BeforeRender method), 789
isdir() (IAssetDescriptor method), 827 keys() (DummyResource method), 895
ISession (interface in pyramid.interfaces), 813 keys() (IDict method), 818
ISessionFactory (interface in pyra- Koym, Todd, 11
mid.interfaces), 814
items() (BeforeRender method), 789 L
items() (DummyResource method), 895
l10n, 544
items() (IDict method), 818
Laflamme, Blaise, 11
iteritems_() (in module pyramid.compat),
Laflamme, Hugues, 11
733
last_modified (IResponse attribute), 822
iterkeys_() (in module pyramid.compat), 733
last_modified (Response attribute), 874
itervalues_() (in module pyramid.compat),
leaf resources, 571
733
LegacySessionCSRFStoragePolicy
IViewDeriver (interface in pyramid.interfaces),
(class in pyramid.csrf ), 781
828
line (IActionInfo attribute), 826
IViewDeriverInfo (interface in pyra-
lineage, 1242
mid.interfaces), 829
lineage
IViewMapper (interface in pyramid.interfaces),
resource, 577
817
lineage() (in module pyramid.location), 829
IViewMapperFactory (interface in pyra-
Lingua, 1242
mid.interfaces), 817
Lingua, 548
listdir() (IAssetDescriptor method), 827
J locale
Jinja2, 1241 negotiator, 557
Jinja2, 448 setting, 558
Jinja2 i18n, 555 Locale Name, 1242
jQuery, 1241 locale name, 553
JSON, 1241 Locale Negotiator, 1242
JSON locale negotiator, 558
renderer, 432 locale_name (Localizer attribute), 806
JSON (class in pyramid.renderers), 838 locale_name (Request attribute), 860
json (Request attribute), 866 Localization, 1242
json (Response attribute), 874 localization, 544
json_body localization deployment settings,
request, 487 555
json_body (Request attribute), 859, 866 Localizer, 1242
json_body (Response attribute), 874 localizer, 551
JSONP Localizer (class in pyramid.i18n), 806
renderer, 434 localizer (Request attribute), 860, 866
JSONP (class in pyramid.renderers), 839 location, 1242
Jython, 1242 location (IResponse attribute), 822
location (Response attribute), 874

1264 Index
The Pyramid Web Framework, Version 1.9.4

location-aware maybe_resolve() (DottedNameResolver


resource, 572 method), 832
security, 609 md5_etag() (IResponse method), 822
logging md5_etag() (Response method), 874
.ini, 511 merge_cookies() (IResponse method), 822
configuration, 511 merge_cookies() (Response method), 874
settings, 511 Merickel, Michael, 11
long (in module pyramid.compat), 733 Message Catalog, 1242
message catalog
M compiling, 550
MAIN (in module pyramid.tweens), 902 initializing, 549
make_body_seekable() (Request method), updating, 550
866 Message Identifier, 1243
make_localizer() (in module pyramid.i18n), message identifier, 545
808 messages
make_tempfile() (Request method), 867 extracting, 549
make_wsgi_app, 354 METAL, 1243
make_wsgi_app() (Configurator method), 741 method (Request attribute), 867
Mako, 1242 middleware, 1243
Mako, 448 middleware
Mako i18n, 555 .ini, 516
manifest (ManifestCacheBuster attribute), 892 configuration, 516
MANIFEST.in, 374 TransLogger, 516
ManifestCacheBuster (class in pyra- mixed() (IMultiDict method), 819
mid.static), 891 mod_wsgi, 1243
map_() (in module pyramid.compat), 733 modifying
mapping to view callable package structure, 382
resource, 449 module, 1243
URL pattern, 449 Moroz, Tom, 11
match() (IRoute method), 812 msg (ACLAllowed attribute), 885
matchdict, 1242 msg (ACLDenied attribute), 885
matchdict, 402 msg (Allowed attribute), 884
matchdict (Request attribute), 844 msg (Denied attribute), 884
matched_route, 403 msgid
matched_route (Request attribute), 844 translation, 545
matching multidict, 1243
root URL, 406 multidict (WebOb), 487
matching the root URL, 406 mutable, 1243
matching views MVC, 345
printing, 523
max_forwards (Request attribute), 867 N
maybe_dotted() (Configurator method), 776 name (IRendererInfo attribute), 815
name (IRoute attribute), 812

Index 1265
The Pyramid Web Framework, Version 1.9.4

native_() (in module pyramid.compat), 734 output_directory


negotiate_locale_name, 553 pcreate command line option, 912
negotiate_locale_name() (in module override_asset, 481
pyramid.i18n), 807 override_asset() (Configurator method),
negotiator 765
locale, 557 overriding
new (ISession attribute), 813 assets, 480, 686
new_csrf_token() (CookieCSRFStoragePol- resource URL generation, 575
icy method), 782 routes, 686
new_csrf_token() (ICSRFStoragePolicy views, 685
method), 813 overriding at runtime
new_csrf_token() (in module pyramid.csrf ), renderer, 440
782
new_csrf_token() (LegacySessionCSRFStor- P
agePolicy method), 781 package, 1243
new_csrf_token() (SessionCSRFStoragePol- package, 377
icy method), 781 package (IRendererInfo attribute), 815
NewRequest, 497 package (IViewDeriverInfo attribute), 829
NewRequest (class in pyramid.events), 786 package structure
NewResponse, 497 modifying, 382
NewResponse (class in pyramid.events), 787 package_name (Registry attribute), 835
NO_PERMISSION_REQUIRED (in module pyra- Paez, Patricio, 11
mid.security), 883 par: settings
not found error (debugging), 467 adding custom, 509
Not Found View, 1243 params (Request attribute), 867
not found view, 634 parse_manifest() (ManifestCacheBuster
not_ (class in pyramid.config), 780 method), 892
NotFound (in module pyramid.exceptions), 790parse_ticket() (AuthTktCookieHelper static
notfound_view_config (class in pyra- method), 730
mid.view), 907 Passing in configuration
notify() (Registry method), 836 variables, 429
null_renderer (in module pyramid.renderers),password (HTTPBasicCredentials attribute),
841 730
PasteDeploy, 1243
O PasteDeploy, 371
object tree, 571, 591 PasteDeploy settings, 501
options (IViewDeriver attribute), 828 path (Request attribute), 867
options (IViewDeriverInfo attribute), 829 path_info
Oram, Simon, 11 prequest command line option,
order (IIntrospectable attribute), 824 914
original_view (IViewDeriverInfo attribute), path_info (Request attribute), 867
829 path_info_peek() (Request method), 867
Orr, Mike, 11 path_info_pop() (Request method), 867

1266 Index
The Pyramid Web Framework, Version 1.9.4

path_qs (Request attribute), 867 physical_path (IResourceURL attribute), 827


path_url (Request attribute), 868 physical_path_tuple (IResourceURL
pattern (IRoute attribute), 812 attribute), 827
pcreate pickle (in module pyramid.compat), 733
--help, 911 PickleSerializer (class in pyramid.session),
pcreate command line option 890
--ignore-conflicting-name, 912 pip, 1244
--interactive, 912 pipeline, 1244
--list-templates, 912 pkg_resources, 1244
--overwrite, 912 plaster, 1244
--package-name <package_name>, pluralization, 551
912 pluralize() (Localizer method), 806
--simulate, 912 pluralizing (i18n), 552
-h, --help, 912 pop() (BeforeRender method), 789
-l, --list, 912 pop() (IDict method), 818
-s <scaffold_name>, --scaffold pop_flash(), 496
<scaffold_name>, 912 pop_flash() (ISession method), 814
-t <scaffold_name>, --template popitem() (BeforeRender method), 789
<scaffold_name>, 912 popitem() (IDict method), 818
output_directory, 912 POST (Request attribute), 860
pdistreport, 535 post() (PyramidTemplate method), 879
--help, 912 post() (Template method), 879
pdistreport command line option pragma (IResponse attribute), 822
-h, --help, 913 pragma (Request attribute), 868
peek_flash(), 496 pragma (Response attribute), 874
peek_flash() (ISession method), 814 pre() (PyramidTemplate method), 879
permission, 1243 pre() (Template method), 879
permission predicate, 1244
default, 604 predicate factory, 1244
permission names, 608 PredicateMismatch, 789
permissions, 603 predicates (IRoute attribute), 812
permits() (IAuthorizationPolicy method), 811 predicates (IViewDeriverInfo attribute), 829
Peters, Tim, 11 predvalseq (class in pyramid.registry), 836
PHASE0_CONFIG (in module pyramid.config), pregenerator, 1244
780 pregenerator (IRoute attribute), 812
PHASE1_CONFIG (in module pyramid.config), prepare() (IExceptionResponse method), 811
780 prepare() (in module pyramid.scripting), 880
PHASE2_CONFIG (in module pyramid.config), prequest, 533
780 --help, 913
PHASE3_CONFIG (in module pyramid.config), prequest command line option
780 --header <name:value>, 914
physical path, 1244 -d, --display-headers, 914
physical root, 1244 -h, --help, 914

Index 1267
The Pyramid Web Framework, Version 1.9.4

-l <login>, --login <login>, 914 <reload_interval>, 916


-m {GET,HEAD,POST,PUT,PATCH,DELETE,PROPFIND,OPTIONS},
--server-name <section_name>,
--method 916
-b, --browser, 916
{GET,HEAD,POST,PUT,PATCH,DELETE,PROPFIND,OPTIONS},
914 -h, --help, 916
-n <name>, --app-name <name>, -n <name>, --app-name <name>,
914 916
config_uri, 914 -q, --quiet, 916
config_vars, 914 -s <server_type>, --server
path_info, 914 <server_type>, 916
prevent_http_cache, 501 -v, --verbose, 916
preventing cross-site request config_uri, 916
forgery attacks, 615 config_vars, 916
principal, 1244 pshell, 525
principal, 608 --help, 916
principal names, 608 extending, 527
principals_allowed_by_permission() pshell command line option
(IAuthorizationPolicy method), 811 --setup <setup>, 917
principals_allowed_by_permission() -h, --help, 917
(in module pyramid.security), 882 -l, --list-shells, 917
printing -p <python_shell>,
matching views, 523 --python-shell
routes, 530 <python_shell>, 917
tweens, 531 config_uri, 917
production.ini, 373 config_vars, 917
project, 1245 ptweens, 531
project, 359 --help, 917
project structure, 369 ptweens command line option
protecting views, 603 -h, --help, 918
proutes, 530 config_uri, 918
--help, 914 config_vars, 918
proutes command line option pviews, 523
-f <format>, --format <format>, --help, 918
915 pviews command line option
-g <glob>, --glob <glob>, 915 -h, --help, 919
-h, --help, 915 config_uri, 919
config_uri, 915 config_vars, 919
config_vars, 915 url, 919
pserve, 364 PY3 (in module pyramid.compat), 733
--help, 915 Pylons, 1245
pserve command line option Pylons, 327, 345
--reload, 916 Pylons Project, 345
--reload-interval Pylons-style controller dispatch,

1268 Index
The Pyramid Web Framework, Version 1.9.4

429 pyramid_debugtoolbar, 1245


PyPI, 1245 pyramid_exclog, 1245
PyPy, 1245 pyramid_handlers, 1245
PYPY (in module pyramid.compat), 733 pyramid_jinja2, 1245
pyramid and other frameworks, 345 pyramid_redis_sessions, 1245
Pyramid Community Cookbook, 1245 pyramid_redis_sessions, 494
pyramid genesis, 10 pyramid_zcml, 1245
pyramid-cookiecutter-alchemy, 359 PyramidTemplate (class in pyramid.scaffolds),
pyramid-cookiecutter-starter, 359 879
pyramid-cookiecutter-zodb, 359 Python, 1245
pyramid.authentication (module), 719 Python (from package, Windows)
pyramid.authorization (module), 731 install, 347
pyramid.compat (module), 732 Python Enhancement Proposals
pyramid.config (module), 735 PEP 343, 1237
pyramid.csrf (module), 781 Python Packaging Authority, 1245
pyramid.decorator (module), 783 pyvenv, 1246
pyramid.events (module), 784
pyramid.exceptions (module), 789 Q
pyramid.httpexceptions (module), 791 query_string (Request attribute), 868
pyramid.i18n (module), 805 QueryStringCacheBuster (class in pyra-
pyramid.interfaces (module), 808 mid.static), 892
pyramid.location (module), 829 QueryStringConstantCacheBuster
pyramid.paster (module), 830 (class in pyramid.static), 893
pyramid.path (module), 832 quote_path_segment() (in module pyra-
pyramid.registry (module), 835 mid.traversal), 899
pyramid.renderers (module), 837
pyramid.request (module), 841 R
pyramid.response (module), 871 range (Request attribute), 868
pyramid.scaffolds (module), 879 redirecting to slash-appended
pyramid.scripting (module), 880 routes, 409
pyramid.security (module), 881 referer (Request attribute), 868
pyramid.session (module), 885 referrer (Request attribute), 868
pyramid.settings (module), 890 register() (IIntrospectable method), 824
pyramid.static (module), 891 Registry (class in pyramid.registry), 835
pyramid.testing, 566 registry (Configurator attribute), 779
pyramid.testing (module), 893 registry (IRendererInfo attribute), 815
pyramid.threadlocal (module), 897 registry (IRouter attribute), 816
pyramid.traversal (module), 897 registry (IViewDeriverInfo attribute), 829
pyramid.tweens (module), 902 registry (Request attribute), 842
pyramid.url (module), 903 reify() (in module pyramid.decorator), 783
pyramid.view (module), 905 relate() (IIntrospectable method), 824
pyramid.viewderivers (module), 910 relate() (IIntrospector method), 826
pyramid.wsgi (module), 910 related() (IIntrospector method), 826

Index 1269
The Pyramid Web Framework, Version 1.9.4

relative_url() (Request method), 868 JSON, 432


reload, 364, 501 JSONP, 434
reload settings, 501 overriding at runtime, 440
reload_all, 501 string, 431
reload_assets, 501, 509 system values, 444
reload_templates, 509 templates, 445
remember() (AuthTktAuthenticationPolicy renderer (template), 444
method), 723 renderer factory, 1246
remember() (AuthTktCookieHelper method), renderer globals, 1246
730 renderer response headers, 435
remember() (BasicAuthAuthenticationPolicy renderers (built-in), 431
method), 727 rendering_val (IBeforeRender attribute), 810
remember() (IAuthenticationPolicy method), Repoze, 1246
811 repoze.bfg genesis, 10
remember() (in module pyramid.security), 881 repoze.catalog, 1246
remember() (RemoteUserAuthenticationPolicy repoze.lemonade, 1246
method), 724 repoze.who, 1246
remember() (RepozeWho1AuthenticationPolicy repoze.workflow, 1246
method), 729 repoze.zope2, 10
remember() (SessionAuthenticationPolicy RepozeWho1AuthenticationPolicy
method), 726 (class in pyramid.authentication), 728
remote_addr (Request attribute), 868 request, 1246
remote_host (Request attribute), 868 request, 389
remote_user (Request attribute), 868 json_body, 487
RemoteUserAuthenticationPolicy request (and text/unicode), 486
(class in pyramid.authentication), 723 Request (class in pyramid.request), 841
remove() (IIntrospector method), 825 request (IBeforeTraversal attribute), 809
remove_conditional_headers() (Request request (IContextFound attribute), 809
method), 868 request (INewRequest attribute), 808
render() (in module pyramid.renderers), 837 request (INewResponse attribute), 809
render_template() (Template method), 879 request (IResponse attribute), 822
render_to_response() (in module pyra- request attributes, 484
mid.renderers), 837 request attributes (special), 485
render_view() (in module pyramid.view), 905 request factory, 1246
render_view_to_iterable() (in module request factory, 638
pyramid.view), 905 request lifecycle, 389
render_view_to_response() (in module request method, 639
pyramid.view), 905 request methods, 486
renderer, 1246 request object, 484
renderer, 429 request processing, 389
adding, 437 request type, 1246
changing, 439 request URLs, 485
explicitly calling, 334 request.registry, 716

1270 Index
The Pyramid Web Framework, Version 1.9.4

request_context() (IRouter method), 816 response adapter, 1247


request_iface (DummyRequest attribute), 896 response callback, 1247
request_iface (Request attribute), 868 response callback, 643
RequestClass (IResponse attribute), 819 response factory, 1247
requirements for installing response factory, 641
packages, 348 response headers, 490
reraise() (in module pyramid.compat), 733 response headers (from a renderer), 435
resolve() (AssetResolver method), 834 response object, 489
resolve() (DottedNameResolver method), 833 response_adapter() (in module pyra-
resource, 1247 mid.response), 878
resource, 587 ResponseClass (Request attribute), 861
ACL, 604 reStructuredText, 1247
finding by interface or class, retry_after (IResponse attribute), 822
581 retry_after (Response attribute), 874
finding by path, 576 RFC
finding root, 578 RFC 2068, 791
lineage, 577 RFC 2616, 819
location-aware, 572 RFC 3986#section-3.5, 850
mapping to view callable, 449 RFC 7231#section-5.3.2, 861
resource API functions, 582 RFC 7231#section-5.3.3, 861
resource interfaces, 579, 599 RFC 7231#section-5.3.4, 861
Resource Location, 1247 RFC 7231#section-5.3.5, 861
resource path generation, 576 root, 1247
resource tree, 1247 root (Request attribute), 842
resource tree, 571, 591 root factory, 1247
resource url root factory, 593
generating, 574 root URL
resource URL generation matching, 406
overriding, 575 root url (matching), 406
resource_path() (in module pyra- Rossi, Chris, 11
mid.traversal), 898 route, 1248
resource_path() (Request method), 858 route
resource_path_tuple() (in module pyra- view callable lookup details,
mid.traversal), 899 418
resource_url, 574 route configuration, 1248
resource_url() (in module pyramid.url), 903 route configuration, 395
resource_url() (Request method), 854 route configuration arguments, 401
response, 1247 route factory, 416
response, 420 route matching, 402
Response (class in pyramid.response), 871 debugging, 411
response (creating), 491 route ordering, 401
response (INewResponse attribute), 809 route path pattern syntax, 396
response (Request attribute), 843, 869 route predicate, 1248

Index 1271
The Pyramid Web Framework, Version 1.9.4

route predicates (custom), 413 session object, 493


route subpath, 626 session.flash, 495
route URLs, 407 session.peek_flash, 496
route_path() (in module pyramid.url), 903 session.pop_flash, 496
route_path() (Request method), 851 SessionAuthenticationPolicy (class in
route_url() (in module pyramid.url), 903 pyramid.authentication), 724
route_url() (Request method), 848 SessionCSRFStoragePolicy (class in pyra-
router, 1248 mid.csrf ), 781
router, 389 set_authentication_policy() (Configu-
Routes, 1248 rator method), 760
routes set_authorization_policy() (Configura-
overriding, 686 tor method), 760
printing, 530 set_cookie() (IResponse method), 823
routes mapper, 1248 set_cookie() (Response method), 875
running an application, 364 set_csrf_storage_policy() (Configura-
running tests, 362 tor method), 761
set_default_csrf_options() (Configura-
S tor method), 760
Sawyers, Andrew, 11 set_default_permission() (Configurator
scaffold, 1248 method), 761
scan, 1248 set_execution_policy() (Configurator
scan() (Configurator method), 741 method), 771
scheme (Request attribute), 869 set_locale_negotiator() (Configurator
script_name (Request attribute), 869 method), 764
Seaver, Tres, 11 set_property() (Request method), 859
security, 601 set_request_factory() (Configurator
location-aware, 609 method), 771
URL dispatch, 417 set_request_property() (Configurator
view, 467 method), 763
send() (Request method), 869 set_root_factory() (Configurator method),
server (IResponse attribute), 823 772
server (Response attribute), 875 set_session_factory() (Configurator
server_name (Request attribute), 869 method), 772
server_port (Request attribute), 869 set_view_mapper() (Configurator method),
serving 772
assets, 470 setdefault() (BeforeRender method), 789
session, 1248 setdefault() (IDict method), 818
session, 492 setting
session (Request attribute), 844, 869 locale, 558
session factory, 1249 settings, 501
session factory (alternates), 494 .ini, 385
session factory (custom), 494 deployment, 389
session factory (default), 492 logging, 511

1272 Index
The Pyramid Web Framework, Version 1.9.4

middleware, 516 status_code (Response attribute), 876


settings (IRendererInfo attribute), 815 status_int (IResponse attribute), 823
settings (IViewDeriverInfo attribute), 829 status_int (Response attribute), 876
settings (Registry attribute), 835 status_map (in module pyramid.httpexceptions),
setUp() (in module pyramid.testing), 893 794
setup.py, 374 stream() (IAssetDescriptor method), 827
setup.py develop, 361 string
setup_logging() (in module pyramid.paster), renderer, 431
831 string_types (in module pyramid.compat),
setup_registry() (Configurator method), 733
776 subpath, 1249
setuptools, 1249 subpath, 593
Shipman, John, 11 subpath (Request attribute), 842
showing installed distributions, subpath (route), 626
535 subrequest, 628
side effect, 1249 exception view, 633
signed_deserialize() (in module pyra- use_tweens, 631
mid.session), 886 subscriber, 1249
signed_serialize() (in module pyra- subscriber, 497
mid.session), 885 subscriber() (in module pyramid.events), 784
SignedCookieSessionFactory() (in mod- system values
ule pyramid.session), 886 renderer, 444
SimpleCookie (in module pyramid.compat),
733 T
singleton, 1249 tearDown() (in module pyramid.testing), 894
special ACE, 608 template, 1249
special permission names, 608 Template (class in pyramid.scaffolds), 879
special view responses, 648 template automatic reload, 447
SQLAlchemy, 1249 template renderers, 444
startup, 364 template system bindings, 448
startup process, 385 template_dir() (Template method), 879
static asset urls, 471 templates
static assets view, 477 debugging, 447
static asssets, 468 renderer, 445
static directory, 380 templates used as renderers, 444
static routes, 408 templates used directly, 441
static_path() (in module pyramid.url), 904 test setup, 563
static_path() (Request method), 853 test tear down, 563
static_url() (in module pyramid.url), 903 testConfig() (in module pyramid.testing), 895
static_url() (Request method), 853 testing_add_renderer() (Configurator
static_view (class in pyramid.static), 891 method), 777
status (IResponse attribute), 823 testing_add_subscriber() (Configurator
status (Response attribute), 876 method), 777

Index 1273
The Pyramid Web Framework, Version 1.9.4

testing_resources() (Configurator traverse() (in module pyramid.traversal), 900


method), 778 traversed (Request attribute), 842
testing_securitypolicy() (Configurator traverser, 645
method), 778 truthy string, 1250
tests (running), 362 tween, 1250
tests.py, 381 tweens
text (Request attribute), 869 printing, 531
text (Response attribute), 877 type (IRendererInfo attribute), 815
text_() (in module pyramid.compat), 733 type_name (IIntrospectable attribute), 823
text_type (in module pyramid.compat), 733
thread local, 1249 U
thread locals, 712 ubody (Response attribute), 877
title (IIntrospectable attribute), 823 unauthenticated_userid (Request at-
translate() (Localizer method), 806 tribute), 844
translating (i18n), 551 unauthenticated_userid() (AuthTktAu-
translation, 551 thenticationPolicy method), 723
activating, 557 unauthenticated_userid() (BasicAuthAu-
domain, 545 thenticationPolicy method), 728
msgid, 545 unauthenticated_userid() (IAuthentica-
Translation Context, 1249 tionPolicy method), 810
translation directories, 547 unauthenticated_userid() (in module
Translation Directory, 1250 pyramid.security), 881
translation directory, 557 unauthenticated_userid() (RemoteUser-
adding, 557 AuthenticationPolicy method), 724
Translation Domain, 1250 unauthenticated_userid() (Repoze-
Translation String, 1250 Who1AuthenticationPolicy method),
translation string, 545 729
translation string factory, 546 undefer() (in module pyramid.registry), 836
translation strings UnencryptedCookieSessionFactoryConfig()
Chameleon, 554 (in module pyramid.session), 887
TranslationStringFactory() (in module unhook_zca() (Configurator method), 776
pyramid.i18n), 805 unicode and text (and the request), 486
Translator, 1250 unicode, views, and forms, 425
TransLogger, 516 unicode_body (IResponse attribute), 823
traversal, 1250 unicode_body (Response attribute), 877
traversal, 586 unit testing, 563
traversal algorithm, 593 unittest, 563
traversal details, 590 unrelate() (IIntrospectable method), 824
traversal examples, 596 unrelate() (IIntrospector method), 826
traversal quick example, 582 unset_cookie() (IResponse method), 823
traversal tree, 571, 591 unset_cookie() (Response method), 877
traversal_path() (in module pyra- upath_info (Request attribute), 869
mid.traversal), 902 update() (BeforeRender method), 788

1274 Index
The Pyramid Web Framework, Version 1.9.4

update() (IDict method), 818 vary (Response attribute), 877


updating Venusian, 1251
message catalog, 550 venv, 1251
url view, 1251
pviews command line option, 919 view
url (Request attribute), 870 security, 467
URL dispatch, 1250 VIEW (in module pyramid.viewderivers), 910
URL dispatch, 395, 585 view callable, 1251
security, 417 view callable lookup details
url generation (traversal), 582 route, 418
URL generator, 646 view callables, 419
URL pattern view calling convention, 419, 420, 427
mapping to view callable, 449 view class, 420
url_encode (in module pyramid.compat), 734 view configuration, 1251
url_encoding (Request attribute), 870 view configuration
url_open (in module pyramid.compat), 734 debugging, 468
url_quote (in module pyramid.compat), 734 view configuration parameters, 449
url_quote_plus (in module pyramid.compat), view deriver, 1251
734 view derivers, 664
url_unquote (in module pyramid.compat), 734 view exceptions, 421
url_unquote_native() (in module pyra- view function, 419
mid.compat), 734 View handler, 1251
url_unquote_text() (in module pyra- view http redirect, 425
mid.compat), 734 View Lookup, 1251
urlargs (Request attribute), 870 view lookup, 449, 587, 593
URLDecodeError, 790 view mapper, 1251
urlencode() (in module pyramid.url), 904 view mapper, 650
urlparse (in module pyramid.compat), 734 view name, 1252
urlvars (Request attribute), 870 view name, 593
uscript_name (Request attribute), 870 view predicate, 1252
use_tweens view renderer, 429
subrequest, 631 explictly calling, 334
user_agent (Request attribute), 870 view response, 420
userid, 1250 view security, 467
username (HTTPBasicCredentials attribute), view_config, 357
730 view_config (class in pyramid.view), 906
view_config decorator, 459
V view_config placement, 460
values() (BeforeRender method), 789 view_defaults (class in pyramid.view), 907
values() (DummyResource method), 895 view_defaults class decorator, 463
values() (IDict method), 818 view_execution_permitted() (in module
van Rossum, Guido, 11 pyramid.security), 882
vary (IResponse attribute), 823 view_name (Request attribute), 842

Index 1275
The Pyramid Web Framework, Version 1.9.4

views zope.component, 715


overriding, 685 ZPT, 1252
views, forms, and unicode, 425
views.py, 378
virtual environment, 1252
virtual hosting, 560
virtual root, 1252
virtual root, 561
virtual_path (IResourceURL attribute), 827
virtual_path_tuple (IResourceURL at-
tribute), 827
virtual_root (Request attribute), 842
virtual_root() (in module pyra-
mid.traversal), 900
virtual_root_path (Request attribute), 842
virtualenv, 1252

W
Waitress, 1252
WebOb, 1252
WebOb, 483
WebTest, 1252
with_package() (Configurator method), 774
WSGI, 1252
WSGI, 366
WSGI application, 354
wsgiapp() (in module pyramid.wsgi), 910
wsgiapp2() (in module pyramid.wsgi), 910
www_authenticate (IResponse attribute), 823
www_authenticate (Response attribute), 877

Z
ZCA, 715
ZCA global API, 715
ZCA global registry, 718
ZCML, 1252
ZODB, 1252
Zope, 1252
Zope, 327, 345
Zope 2, 10
Zope 3, 10
Zope Component Architecture, 1252
Zope Component Architecture, 715

1276 Index

You might also like