Scribd
Upload
93 views2 pages

Cs2204 Digital Logic & State Machine Design Spring 2014

This document discusses semiconductor technology and digital logic circuits. It begins by explaining how the number and type of logic gates and flip-flops on an integrated circuit depend on the desired operation, speed, cost, and other characteristics of the digital product. It then describes how transistors on chips implement logic gates and flip-flops, and how chips on printed circuit boards implement digital circuits. Finally, it provides tables comparing technologies used for chips, including different transistor types, circuit families, and scales of integration.

Uploaded by

Debashish Pal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
93 views2 pages

Cs2204 Digital Logic & State Machine Design Spring 2014

This document discusses semiconductor technology and digital logic circuits. It begins by explaining how the number and type of logic gates and flip-flops on an integrated circuit depend on the desired operation, speed, cost, and other characteristics of the digital product. It then describes how transistors on chips implement logic gates and flip-flops, and how chips on printed circuit boards implement digital circuits. Finally, it provides tables comparing technologies used for chips, including different transistor types, circuit families, and scales of integration.

Uploaded by

Debashish Pal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

CS2204 DIGITAL LOGIC & STATE MACHINE DESIGN SPRING 2014

A BRIEF LOOK AT SEMICONDUCTOR TECHNOLOGY

The final digital product is


A new chip (IC) A new PCB

Which gates & FFs and how many of them ? Depend on Which chips and how many chips ?

Operation (purpose) and speed, cost, power, size, weight, reliability, compatibility, upgradability, etc. of the digital product

Switches Implement Implement on on


(IC transistors) Gates and FFs Digital circuits Chips PCBs

IC transistors resistors, Implement


capacitors, diodes, etc Gates and FFs
have have
Speed, cost, power, size, weight, reliability, Determine
Speed, cost, power, size, weight, reliability,
compatibility, upgradability, etc. characteristics compatibility, upgradability, etc. characteristics

➢ Therefore, we also need to study technology


➱ Substances used for IC transistors, resistors, capacitors, diodes, etc.
➱ Digital electronic circuits that use IC transistors, resistors, etc. and implement gates and FFs

Comparison of commonly used substances and digital electronic circuits for chips with respect to chip density

Silicon Silicon Germanium Gallium Niobium Substance


(SiGe) Arsenide (Superconducting)
used
(Not a semiconductor)

Unipolar Bipolar Transistor


type

CMOS BiCMOS TTL ECL Transistor


circuit

Number of
SSI MSI LSI VLSI ULSI LSI VLSI ULSI SSI MSI LSI SSI MSI LSI SSI MSI LSI gates on
the chip
faster

NYU School of Engineering Page 1 of 2 Handout No : 5 February 11, 2014


Table 1: Chip densities for various scales of integration

Scales of Integration Siewiorek et Burger et al


(chip density) al (1982) (1982)

Small Scale Integration (SSI) < 10 gates < 64 components

Medium Scale Integration (MSI) < 100 gates < 2K components

Large Scale Integration (LSI) < 10,000 gates < 64K components

Very Large Scale Integration (VLSI) < 100,000 gates < 2M components

Ultra Large Scale Integration (ULSI) > 100,000 gates > 2M components

Table 2: The state of the silicon technology Table 3: Summary of characteristics for three commonly used IC families

Characteristic Silicon Parameter TTL CMOS ECL

Densest chip transistor circuit CMOS Speed Medium Low High

Transistors/chip (density) 4,000,000,000 Power consumption Medium Low High

Gate delay 50 - 500 ps Chip density Medium High Low

Process 22 nanometer Cost Low Medium High

Transistor-Transistor Logic (TTL) features


➢ TTL families : 7400 series : 74 (Standard), 74H (High speed), 74L (Low-power), 74S (Schottky), 74LS (Low-power
Schottky), 74AS (Advanced Schottky), 74ALS (Advanced Low-power Schottky), 74F (Fast)
➢ Unused gate inputs : can be left unconnected (floating), but should be tied to a used input to be safe. Also, can connect to
1 or 0 depending on the input characteristic, via a pull-up resistor or pull-down resistor, respectively
➢ Gate output circuits :
➔ Totem-pole (do not short circuit gate outputs)
➔ Tri-state (gate outputs can be short circuited if only one gate is enabled)
➔ Open-collector (an external pull-up resistor needed. Gate outputs can be short circuited)

Complementary Metal Oxide Semiconductor (CMOS) features


➢ High-density CMOS chips : Microprocessors, graphics processors, DRAMs, SRAMs, etc.
➢ Low-density CMOS chips : 4000 series ; 7400 series : 74HC (High-speed CMOS), 74HCT (High-speed CMOS, TTL
compatible), 74AC (Advanced CMOS), 74ACT (Advanced CMOS, TTL compatible), 74FCT (Fast CMOS, TTL com-
patible), 74FCT-T(Fast CMOS, TTL compatible with TTL VOH)
➢ Unused gate inputs : do not leave them unconnected (floating). Tie them to a used input. Also, can connect to 1 or 0
depending on the input characteristic, via a pull-up resistor or pull-down resistor, respectively
➢ Gate output circuits :
➔ Regular (do not short circuit gate outputs)
➔ Tri-state (gate outputs can be short circuited, if only one gate is enabled)
➔ Open-drain (an external pull-up resistor needed. Gate outputs can be short circuited)
➢ Electrostatic discharge can damage CMOS chips. Unless properly grounded, one should not touch CMOS chips

NYU School of Engineering Page 2 of 2 CS2204 Handout No : 5 February 11, 2014

You might also like