Scribd
Upload
107 views1 page

Design of Rectangular Beam: Calculation For Moment

The document provides the design of a rectangular beam with a width of 300mm and depth of 230mm. Key calculations are shown for determining the required tension and compression reinforcement to resist the bending moment of 51kNm. Shear reinforcement is also designed to resist the shear force of 84kN. Stirrups with an area of 101mm^2 spaced at 210mm centers are specified.

Uploaded by

Ravi Sharma Bhandari
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
107 views1 page

Design of Rectangular Beam: Calculation For Moment

The document provides the design of a rectangular beam with a width of 300mm and depth of 230mm. Key calculations are shown for determining the required tension and compression reinforcement to resist the bending moment of 51kNm. Shear reinforcement is also designed to resist the shear force of 84kN. Stirrups with an area of 101mm^2 spaced at 210mm centers are specified.

Uploaded by

Ravi Sharma Bhandari
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DESIGN OF RECTANGULAR BEAM

Client: Date:
Designed By: Building Type:
Input
Width of beam, b 300 mm Mu = 51 kNm
Depth of beam, D 230 mm Vu = 84 kN
Clear cover 20 mm Tu = 0 kNm
Stirrups size 8 mm Stress-Strain Data
Bar size 16 mm Strain Stress
Effective depth 194 mm 0.00174 347.8
Grade of concrete,fck = 20 N/mm2 0.00195 369.6
2
Grade of steel, fy = 500 N/mm 0.00226 391.3
Calculation for Moment 0.00277 413
Ast, min 99 mm2 0.00312 423.9
xu, max/d 0.46 0.00417 434.8
Mu, lim 30 kNm
Type of Section DRS Doubly Reinforced Section
2
Area of tension reinforcement, Ast 744 mm
2
Area of compression reinforcement 316 mm
Provide 16 mm dia. 4 nos. bars. tension reinforcement 804 OK
Provide 16 mm dia. 2 nos. bars. comp. reinforcement 402 OK

Calculation for Shear


% of tension reinforcement 1.166%
Equivalent Shear 84 kN
2
Nominal shear stress, 1.22 N/mm
= 2.02

2
Design shear stress, = 0.65 N/mm
Hence, shear reinforcement is to be provided for a shear force of
(1.22 - 0.65) 300 x 230 = 39330 N

2
Assuming 8 φ 2-legged stirrups, Asv = 101 mm

210 mm c/c

Provide 8 mm dia 2-legged stirrups @ 210 mm c/c.

Page 1 of 1

You might also like