Royale Lustre: Product Benefits

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Finishes for Interior Walls

PRODUCT CODE 0125

Royale Lustre
Asian Paints Royale Lustre provides a very tough and durable finish to your walls. When applied with a roller,
it imparts a characteristic pattern on to the wall.

PRODUCT BENEFITS
Enhanced durability penetrating the surface and ensures easy cleanability.
Royale Lustre ensures the paint film lasts far longer than Even the toughest of household stains like turmeric and
regular emulsions. ink, are reduced to a large extent, while all water based
stains like tea, coffee, etc are completely removed.
Rich Sheen finish with a distinct Dana pattern WATER BASED
Royale Lustre offers a rich satin shimmer to your walls Anti-fungal shield
that enhances the interiors of your home. The unique This is designed to prevent any kind of fungal growth
dana pattern, offers a finish that is unmatched by any on walls
other product. A choice of over 1800 colours ensures
Anti-yellowing, less odour and irritation in eyes
that you are always spoilt for choice.
Royale Lustre is a water-based paint that protect your
Enhanced stain resistance walls from yellowing. It has less odour and since it uses
* All Asian Paints products contain no added
The Teflon Surface Protector has enhanced stain only water as a solvent, it causes almost no irritation Lead, Mercury, Arsenic or Chromium
resistance that protects your walls from all kinds of during painting. from April 2008.
stains. The paint film works to prevent stains from

PRODUCT FEATURES
WASHABILITY COLOURS AVAILABLE COVERAGE

BEST IN CLASS

HIGH
1700+* On smooth primed masonry surface by brushing
followed by rolling with Honey comb roller
or Felt Roller
MEDIUM *Currently available in more than
1700 shades as per the Asian Paints
Colour Spectra. 1 COAT 2 COATS
LOW
75 - 85 45 - 50
sq.ft/ltr** sq.ft/ltr**

AVAILABLE PACKS FINISH On smooth primed masonry surface by brushing


followed by rolling with Sponge Roller

1 COAT 2 COATS
MATT LOW SHEEN HIGH SHEEN HIGH GLOSS
130 - 160 85 - 105
sq.ft/ltr** sq.ft/ltr**
SILKY SMOOTH
1 Ltrs 4 Ltrs 10 Ltrs 20 Ltrs

Shelf life: 3 years from date of manufacture in original tightly Refer to sheen levels in technical details **Actual coverage may vary from the quoted coverage due
closed containers away from direct sunlight and excessive to factors such as method and condition of application and
heat. surface roughness and porosity.

HOW TO APPLY
PRE PAINTING STEPS PAINT APPLICATION PROCESS
APPLICATION CODE THINNER DILUTION % APPLICATION RECOATING
PLASTER New masonary surfaces VISCOSITY1 PERIOD
must be allowed to cure completely. STEP 1
It is recommended to allow 28 days SANDING SAND THE SURFACE WITH EMERY PAPER 180 AND WIPE CLEAN
as the curing time for new masonary
surfaces. STEP 2
DECOPRIME CEMENT PRIMER (ST) 0359 MTO* BRUSH 8 - 10 BRUSH 30 - 40 6 - 8 HRS
CLEANING Surface should be BRUSH
free from any loose paint, dust or STEP 3
grease. Growths of fungus, algae ACRYLIC WALL PUTTY BASED ON
1354 WATER N/A 4 - 6 HRS
PUTTY KNIFE REQUIREMENT
or moss should be removed by
wire brushing and water. In case of STEP 4
areas having excessive dampness SANDING SAND THE SURFACE WITH EMERY PAPER 180 AND WIPE CLEAN
using Asian Paints DampBlock
to limit further dampness. When STEP 5
DECOPRIME CEMENT PRIMER (ST) 0359 MTO* BRUSH 8 - 10 BRUSH 30 - 40 6 - 8 HRS
the underlying surface exhibits BRUSH
chalkiness, in spite of thorough
STEP 6
surface cleaning, use Asian Paints LIGHT SAND THE SURFACE WITH EMERY PAPER 320 AND WIPE CLEAN
SANDING
Exterior Sealer.
FILLING FOR CRACKS For filling STEP 7 & 8 - OPTION 1
INCASE OF GRAIN FINISH**
cracks upto 3mm use Asian Paints APPLICATION AT
FIRST & SECOND COAT 0125 NA NA 4 - 6 HRS
Crack Seal. SUPPLY VISCOSITY
ROYALE LUSTRE
BRUSH / ROLLER
FILLING FOR HOLES & DENTS
In case of dents and holes use STEP 7 & 8 - OPTION 2
Asian Paints Acrylic Wall Putty or INCASE OF SMOOTH FINISH**
BRUSH 20-30 BRUSH 30 - 40
FIRST & SECOND COAT 0125 WATER 4 HRS
white cement and fine sand in the ROYALE LUSTRE
ROLLER 20-30 ROLLER 30 - 40
ratio 1:3 BRUSH / ROLLER
Royale Lustre should not be
1. As measured through a Ford cup.
applied on surfaces / substrates 2. Recoat period is quoted for 25°C and 50% Relative Humidity, these may vary under different conditions.
that are subjected to continuous * Mineral Turpentine Oil
seepage or dampness. ** Fine pattern of roller will be retained depending on type of roller used
Finishes for Interior Walls

HOW TO CHOOSE COLOURS


Browse through Asian Paints colour tools to help you find the right colour combination

COLOUR SPECTRA FAN DECK* INTERIOR COLOUR COMBINATIONS GUIDE ROYALE SHADE CARD ROYALE BOOK OF COLOURS

*These shades are for reference only. Please refer to the Colour Spectra or Colour Palette for correct shade reference

ADDITIONAL INFORMATION

VOC CONTENT PRECAUTIONS

> Do not apply when ambient temperature is less than 10°C or if the temperature might drop to
this level within 4 hrs of application.
> Do not over-thin or over-extend the brush.
> Tint using Asian Paints machine colourants only
> Stir well and strain before use.
Asian Paints Royale Lustre meets the LEEDS VOC criteria as
per Indian Green Building Council version 1.0 as tested at
> Tinted paints need thorough shaking immediately after tinter addition as well as before use.
Shriram Institute for Industrial Research. Tested for Royale
Lustre White (shade code 0908)

POST PAINTING CARE SAFETY FEATURES

For the best performance of the paint, ensure > Kindly refer to the MSDS for Asian Paints Royale Lustre which gives detailed information on
proper washing and cleaning of all algal and safety measures while handling the paint.
fungal growth, if any, at regular intervals of > Store the container with the lid tightly closed in an upright position, in a cool, dry place
six months. > Keep out of reach of children and away from food, drink
> May be harmful if swallowed. In case of ingestion seek immediate medical attention.
TECHNICAL DETAILS > Wear eye protection during application. In case of contact with eyes, rinse immediately with
plenty of water and seek medical advice.
> In case of skin contact immediately wash skin with soap and plenty of water. Get medical
a. Drying time: Surface dry time 30 min attention if irritation develops or persists.
b. Sheen levels: 40-70 at 85 deg GH > Do not breathe vapour or spray.It is recommended to wear suitable nose pad during sanding
c. Flash point IS101/1987 Part 1, Sec 6: NA and surface preparation to avoid dust inhalation
d. Stability of thinned paint: To be used > Do not pour leftover paint down the drain or in water courses.
within 24 hours > In the event of spills, contain spillage using sand or earth.
> Safety Data Sheet available for professional user on request.
> No added Lead, Mercury or Chromium compounds
Version No. VN01/07/2012

Version No. VN01/07/2012. Please note that this datasheet supersedes all previous versions
For Feedback/complaints, write to Marketing Manager ServicesAsian Paints Limited, 6A, Shantinagar, Santacruz(E), Mumbai 400 055, India

You might also like