The FP-404 EXP is a bi-plane kit aircraft that provides an exhilarating flying experience. It can be assembled from a complete kit or partial kits using basic household tools in around 500 hours. The bi-plane has exceptional stability, maneuverability, and structural strength. It climbs rapidly and is very responsive to pilot commands. Specifications include a wingspan of 18 feet, 50-65hp engine options, a top speed of 80 mph, and a stall speed of 30 mph.
The FP-404 EXP is a bi-plane kit aircraft that provides an exhilarating flying experience. It can be assembled from a complete kit or partial kits using basic household tools in around 500 hours. The bi-plane has exceptional stability, maneuverability, and structural strength. It climbs rapidly and is very responsive to pilot commands. Specifications include a wingspan of 18 feet, 50-65hp engine options, a top speed of 80 mph, and a stall speed of 30 mph.
The FP-404 EXP is a bi-plane kit aircraft that provides an exhilarating flying experience. It can be assembled from a complete kit or partial kits using basic household tools in around 500 hours. The bi-plane has exceptional stability, maneuverability, and structural strength. It climbs rapidly and is very responsive to pilot commands. Specifications include a wingspan of 18 feet, 50-65hp engine options, a top speed of 80 mph, and a stall speed of 30 mph.
The FP-404 EXP is a bi-plane kit aircraft that provides an exhilarating flying experience. It can be assembled from a complete kit or partial kits using basic household tools in around 500 hours. The bi-plane has exceptional stability, maneuverability, and structural strength. It climbs rapidly and is very responsive to pilot commands. Specifications include a wingspan of 18 feet, 50-65hp engine options, a top speed of 80 mph, and a stall speed of 30 mph.
It will turn a love of flying into a passion for flight. Once in
the bi-plane cockpit, you can't wait to get into the air. Cruise speed is an invigorating 70 mph, with exceptional stability for hands-off flight capability.
Construction of the FP-404
These bi-planes are available either as a complete kit—
which contains everything you need except instruments, paint, varnish and pilot restraint system—or in “pay as you build” partial kits. Aircraft-quality materials are supplied throughout; you simply epoxy the wooden pieces together over the full-size plans.
After the woodwork is completed, it is sealed with polyurethane varnish, covered with heat-shrinkable aircraft fabric, sealed and painted to provide a long-lasting durable airframe.
The average builder can assemble a FP-404 in 500 hours using normal household tools.
Airborne Adventure
The FP-404 represents a reborn era in airborne adventure. This bi-plane aircraft is a throw-back to seat-of-the- pants flying, complete with minimal instruments and bare-necessity controls. The sports car of light-planes, the FP- 404 is a flying experience that will leave you flying.
Featuring short wings, full-span ailerons and a semi-symmetrical airfoil, the aircraft answers commands instantaneously. Geodetic wood construction and additional bracing contribute to exceptional structural strength, enough to withstand higher Gs than most lightplanes.
For experimental models, a 50 horsepower Rotax engine pours out more than enough power for exhilarating, 800 feet-per-minute climbs and turns that will push you back in your seat. The plane is as responsive as you are aggressive.
Specifications Wingspan 18’ Flight Performance Wing Area 120 sq ft Velocity-Never Exceed 90 mph Wing Gap 2’8” Top Level Speed 80 mph Aileron Area 14 sq ft Cruise Speed 72 mph Length 14’6” Stall Speed 30 mph Height 5’5” Climb Rate 800 fpm Tail Span 6’6” Take-off Run 125’ Engine Rotax 503: 50hp Landing Roll 200’ /Rotax 582: 65 hp L/D (glide ratio) 8-to-1 Gross Weight 540 lbs Empty Weight 275 lbs Max Pilot Weight 200 lbs Construction Time 500 hrs Field Assembly Time 15 min Fisher Flying Products 449 Hudson Drive, Unit B Dorchester, ON N0L 1G5 Canada Call us: 519-933-2055 www.fisherflying.com
