CLARIFY™ 740 PREMIUM SERIES

Cost Effective Filtration ------------------------------------------------------------------------------------------

FTC is pleased to introduce its Clarify 740 Premium
style cartridge.

The original FTC Deep Pleat design has been re-engineered

to provide a greater range of micron ratings and more dirt
holding capacity.

Available in cellulose and polypropylene filter media, these next

generation cartridges can be constructed with metal or
non-polypropylene components for applications that involve
higher temperatures.

Benefits --------------------------------------------------------------------------------------------------------------------------------
• Provides much greater dirt holding than standard industry
deep pleat elements
• Economical 740 style filter element
• Polypropylene and Cellulose medias will cover most
filtration applications
• Ergonomic design allows for easy installation and extraction
resulting in an operator friendly element
• Dual o-ring seal to ensure positive capture of contaminants
• Absolute rated media with fixed pore structure prevents
particle unloading and provides reliable results in
critical applications

Common Applications --------------------------------------------------------------------------------------------

• Water and Wastewater, Process Fluids, Acids, Bases, Amines,
Glycols, Hydrocarbons, Brines, Organic Solvents, Fuels, Coolants

Dimensions -----------------------------------------------------------------------------------------------------------------------
Outside Diameter......... 6.25″
Inside Diameter............. 1.55″
Length.................................... 40″ and 30″

Materials of Construction -------------------------------------------------------------------------------------

Filter Media........................ Cellulose and Polypropylene
Center Core........................ Polypropylene, Tinned Steel, Stainless Steel
Netting.................................. Polypropylene, Nylon
End Caps............................. Polypropylene, Tinned Steel, Stainless Steel
Acetal

Filtration Technology Corporation • FTC-houston.com

CPDP-001-08-17 11883 Cutten Road • Houston, TX 77066 • 713.849.0849 • Fax: 713.849.0202
 PRODUCT SPECIFICATIONS

MEDIA MICRON RATING AT EFFICIENCY

Micron Ratings @ 99.98% (beta FILTER MODEL 74F 74G 74H 74J 74K 74L 74M 74N
5000): 5, 10, 20, 30, 40, 70, 100 and
99.00% (beta 100) 2 5 10 15 25 40 70 100
135 micron
99.98% (beta 5000) 5 10 20 30 40 70 100 135
Maximum Operating Conditions:
185°F (85°C) continuous operating
temperature

Recommended Flow Rate for DIRT HOLDING CAPACITY (LBS)* per standard 40” filter
Optimal Dirt Loading: 40 GPM
per standard 40” filter FILTER MODEL 74F 74G 74H 74J 74K 74L 74M 74N

Recommended Differential Pounds of Solids 15.3 15.5 17.3 17.8 18.4 19.2 19.4 19.6
Pressure for Change-out: 35 PSID

Maximum Recommended
Differential Pressure: 50 PSID CLEAN PRESSURE DROP (PSID)* per standard 40” filter

FILTER MODEL 74F 74G 74H 74J 74K 74L 74M 74N

PSID @ 20 GPM 0.29 0.26 0.24 0.24 0.24 0.24 0.22 0.22

PSID @ 40 GPM 0.94 0.90 0.86 0.84 0.83 0.83 0.81 0.81

PSID @ 60 GPM 1.81 1.77 1.77 1.77 1.77 1.77 1.76 1.73

PSID @ 80 GPM 2.75 2.61 2.57 2.55 2.50 2.50 2.46 2.43

Data based on Filtration Technology Corporation Research and Development Center’s standard test procedure.
The reported data is based on the polypropylene filter models.

CARTRIDGE CODING

Use the chart below to create cartridge part number for ordering. Please include dashes when creating part numbers.

Clarify 740 Micron Rating Non-Media

Premium Filter Media Length End Cap O-Ring
Series @ 99.98% Components Style
EXAMPLE

PDP 74K P P 40 6 B

74F = 5 Micron
74G = 10 Micron *P
Polypropylene B
74H = 20 Micron Buna-N
M C 6 - 226
74J = 30 Micron 30 - 30”
OPTIONS

Tinned Steel Cellulose E

O-ring
74K = 40 Micron S P 40 - 40” EPDM
304 Stainless Polypropylene 3 - R-P Style
74L = 70 Micron V
L Viton®
74M = 100 Micron
Acetal
74N = 135 Micron

* The raw polypropylene materials composing these filters are FDA compliant according to CFR Title 21
Viton is a registered trademark of E.I. DuPont de Nemours & Co., Inc.

Notice: The information presented here is based on tests and data which FTC believes to be reliable, but their accuracy or completeness is not guaranteed.
FTC MAKES NO WARRANTIES, EXPRESS OR IMPLIED, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
The determination of whether the FTC product is fit for a particular purpose or application is the responsibility of the user.
ITEM PART NUMBER DESCRIPTION QTY.
NO.
1 GP-SS-R-406-2.375 226 RECEIVER NOZZLE 1
2 GP-SS-SSW-1.500 CENTER CORE FOR GUIDEPOST ASSEMBLY 1
3 Rounded Nut Plate Rounded nut plate covering core hole 1
4 O-231 200 Series O-ring 1
5 HHNUT 0.5000-13-D-N heavy hex nut 1/2"-13 1

2 3 5
4 1

36.879
1/8
36.750 ESTIMATED POST LENGTH

SECTION A-A
GRIND SMOOTH
1/16

0.080
0.125
0.250
1/8
1.500

Item 2 Detail: 1.50" OD +0/-.010, 12 1.281

gauge, spiral seam welded core.
1.410
Hole pattern 3/16" on 1/4" centers.
ITEM 3: NUT PLATE DETAIL
THIS DOCUMENT IS CONFIDENTIAL AND IS THE UNLESS OTHERWISE SPECIFIED FILTRATION TECHNOLOGY CORPORATION
PROPERTY OF FILTRATION TECHNOLOGY 11883 CUTTEN RD - HOUSTON TEXAS 77066-USA
CORPORATION (FTC). IT MAY NOT BE COPIED OR MACHINE
REPRODUCED IN ANY WAY WITHOUT THE EXPRESS TOLERANCES

TITLE: Guidepost, Spiral Seal Weld, 226

WRITTEN CONSENT OF FTC. THIS DOCUMENT ALSO Plastic injection molded tolerance: 1/32
IS AN UNPUBLISHED WORK OF FTC. FTC INTENDS TO .X .1
AND IS MAINTAINING THE WORK AS CONFIDENTIAL Do not scale for dimensions.
INFORMATION. FTC MAYALSO SEEK TO PROTECT .XX .01 Remove all burrs.
THIS WORK AS AN UNPUBLISHED COPYRIGHT. IN
THE EVENT OF EITHER INADVERTENT OR .XXX .005 Radius all corners .025 - .035 R

DWG #: GP-SS-3676-2.38
DELIBERATE PUBLICATION, FTC INTENDS TO
ENFORCE ITS RIGHTS TO THIS WORK UNDER THE ANGLE 1 Break sharp edges:
COPYRIGHT LAWS AS A PUBLISHED WORK. THOSE FRACTION 1/16 .010-.025x45 or .010-.025 R
HAVING ACCESS TO THIS WORK MAY NOT COPY,
125
Sheet1
USE OR DISCLOSE THE INFORMATION IN THIS WORK
SURFACE FINISH
R. FISHER
UNLESS EXPRESSLY AUTHORIZED BY FTC.
1
CHECKED APPROVED OF
© 2015 FILTRATION TECHNOLOGY CORPORATION
DRAWN
DATE: 1/21/16 Material: 304 SS
DATE NO REVISION BY APP THIRD ANGLE PROJECTION BY:
SCALE: NTS
 6.
25
±0
.1
3
N
O
M
O
O-RINGS D

29.88 ±0.13 CAP TO CAP FOLDING

SNAP HANDLE

30.25 ±0.13 CAP TO TOP OF HANDLE FOLDED

31.39 ±0.13 NOM OAL NOZZLE TO TOP OF HANDLE FOLDED

THIS DOCUMENT IS CONFIDENTIAL AND IS THE

FILTRATION TECHNOLOGY CORPORATION
PROPERTY OF FILTRATION TECHNOLOGY
UNLESS OTHERWISE SPECIFIED
11883 CUTTEN RD - HOUSTON TEXAS 77066-USA
CORPORATION (FTC). IT MAY NOT BE COPIED OR
REPRODUCED IN ANY WAY WITHOUT THE EXPRESS
WRITTEN CONSENT OF FTC. THIS DOCUMENT ALSO
IS AN UNPUBLISHED WORK OF FTC. FTC INTENDS TO MACHINE
TOLERANCES
INJECTION MOLD
TOLERANCES
Do not scale for dimensions. TITLE: PSS SERIES FILTER
AND IS MAINTAINING THE WORK AS CONFIDENTIAL Remove all burrs.
INFORMATION. FTC MAYALSO SEEK TO PROTECT .X .1 .X .1
THIS WORK AS AN UNPUBLISHED COPYRIGHT. IN Radius all corners .025 - .035 R.
THE EVENT OF EITHER INADVERTENT OR .XX .01 .XX .01

DWG #: PSS-74X-PP306X
Break sharp edges:
DELIBERATE PUBLICATION, FTC INTENDS TO .010 - .025 x 45° or .010 - .025 R.
ENFORCE ITS RIGHTS TO THIS WORK UNDER THE .XXX .005 .XXX .005
COPYRIGHT LAWS AS A PUBLISHED WORK. THOSE
ANGLE 1
HAVING ACCESS TO THIS WORK MAY NOT COPY,
USE OR DISCLOSE THE INFORMATION IN THIS WORK FRACTION 1/16
1
UNLESS EXPRESSLY AUTHORIZED BY FTC.
DATE NO REVISION BY APP © 2016 FILTRATION TECHNOLOGY CORPORATION
SURFACE FINISH THIRD ANGLE PROJECTION
DRAWN
BY: L. GARCIA CHECKED APPROVED
DATE: 3/29/2016 SCALE: NTS Material:
OF
1
 38.00 ±0.13 NOM FLAT TO FLAT FILTER LENGTH

39.54 NOM HEIGHT TO TOP OF FILTER

39.14 ±0.13 NOM FILTER LENGTH

36.88 NOM GUIDEPOST HEIGHT

WITH HANDLE FOLDED

ABOVE TUBESHEET

6.45 NOMINAL FILTER

SPACING IN VESSEL

6.25 NOM OD

VESSEL TUBESHEET

THIS DOCUMENT IS CONFIDENTIAL AND IS THE

FILTRATION TECHNOLOGY CORPORATION
PROPERTY OF FILTRATION TECHNOLOGY
UNLESS OTHERWISE SPECIFIED
11883 CUTTEN RD - HOUSTON TEXAS 77066-USA
CORPORATION (FTC). IT MAY NOT BE COPIED OR
REPRODUCED IN ANY WAY WITHOUT THE EXPRESS
WRITTEN CONSENT OF FTC. THIS DOCUMENT ALSO
IS AN UNPUBLISHED WORK OF FTC. FTC INTENDS TO MACHINE
TOLERANCES
INJECTION MOLD
TOLERANCES
Do not scale for dimensions. TITLE: STANDARD VESSEL LAYOUT
740-406/407 STYLE FILTERS
AND IS MAINTAINING THE WORK AS CONFIDENTIAL Remove all burrs.
INFORMATION. FTC MAYALSO SEEK TO PROTECT .X .1 .X .1
THIS WORK AS AN UNPUBLISHED COPYRIGHT. IN Radius all corners .025 - .035 R.
THE EVENT OF EITHER INADVERTENT OR .XX .01 .XX .01

DWG #:
Break sharp edges:
DELIBERATE PUBLICATION, FTC INTENDS TO .010 - .025 x 45° or .010 - .025 R.
ENFORCE ITS RIGHTS TO THIS WORK UNDER THE .XXX .005 .XXX .005
COPYRIGHT LAWS AS A PUBLISHED WORK. THOSE
ANGLE 1
HAVING ACCESS TO THIS WORK MAY NOT COPY,
USE OR DISCLOSE THE INFORMATION IN THIS WORK FRACTION 1/16
1
UNLESS EXPRESSLY AUTHORIZED BY FTC.
DATE NO REVISION BY APP © 2016 FILTRATION TECHNOLOGY CORPORATION
SURFACE FINISH THIRD ANGLE PROJECTION
DRAWN
BY: L. GARCIA CHECKED APPROVED
DATE: 4/1/2016 SCALE: NTS Material:
OF
1
 5
6 .2
38.00 ±0.1300 NOM FLAT TO FLAT FILTER LENGTH

37.13 GUIDEPOST HEIGHT ABOVE TUBESHEET

39.79 NOM HEIGHT TO TOP OF FILTER

6.45 NOM FILTER SPACING

39.14 ±0.13 NOM FILTER LENGTH

DETAIL A
WITH HANDLE FOLDED

SCALE 2 : 3

GUIDEPOST

1/8 COUPLER VESSEL TUBESHEET

VESSEL TUBESHEET
A

THIS DOCUMENT IS CONFIDENTIAL AND IS THE

FILTRATION TECHNOLOGY CORPORATION
PROPERTY OF FILTRATION TECHNOLOGY
UNLESS OTHERWISE SPECIFIED
11883 CUTTEN RD - HOUSTON TEXAS 77066-USA
CORPORATION (FTC). IT MAY NOT BE COPIED OR
REPRODUCED IN ANY WAY WITHOUT THE EXPRESS
WRITTEN CONSENT OF FTC. THIS DOCUMENT ALSO
IS AN UNPUBLISHED WORK OF FTC. FTC INTENDS TO MACHINE
TOLERANCES
INJECTION MOLD
TOLERANCES
Do not scale for dimensions. TITLE: STD VESSEL LAYOUT 740-406/407 STYLE
AND IS MAINTAINING THE WORK AS CONFIDENTIAL Remove all burrs.
INFORMATION. FTC MAYALSO SEEK TO PROTECT .X .1 .X .1
THIS WORK AS AN UNPUBLISHED COPYRIGHT. IN Radius all corners .025 - .035 R.
THE EVENT OF EITHER INADVERTENT OR .XX .01 .XX .01

DWG #: SVL - 740-40X

Break sharp edges:
DELIBERATE PUBLICATION, FTC INTENDS TO .010 - .025 x 45° or .010 - .025 R.
ENFORCE ITS RIGHTS TO THIS WORK UNDER THE .XXX .005 .XXX .005
COPYRIGHT LAWS AS A PUBLISHED WORK. THOSE
ANGLE 1
HAVING ACCESS TO THIS WORK MAY NOT COPY, Sheet1
USE OR DISCLOSE THE INFORMATION IN THIS WORK FRACTION 1/16
UNLESS EXPRESSLY AUTHORIZED BY FTC.
DATE NO REVISION BY APP © 2017 FILTRATION TECHNOLOGY CORPORATION
SURFACE FINISH
125 THIRD ANGLE PROJECTION
DRAWN
BY: R. FISHER CHECKED APPROVED
DATE: 5/26/2017 SCALE: NTS Material:
OF
1
 A A

THREAD 2-3/8"-12 THRU ALL

0.250
3.38

LEAD IN CHAMFER

SECTION A-A
Z

Length Code Dimension Z Tubesheet

Y.YY Thickness
3.063 TUBESHEET THICKNESS +0.25 1.25 1.25 0.75
1.50 1.50 1.00
1.75 1.75 1.25
THIS DOCUMENT IS CONFIDENTIAL AND IS THE UNLESS OTHERWISE SPECIFIED FILTRATION TECHNOLOGY CORPORATION
PROPERTY OF FILTRATION TECHNOLOGY 11883 CUTTEN RD - HOUSTON TEXAS 77066-USA
CORPORATION (FTC). IT MAY NOT BE COPIED OR MACHINE
REPRODUCED IN ANY WAY WITHOUT THE EXPRESS TOLERANCES Plastic injection molded tolerance: 1/32
WRITTEN CONSENT OF FTC. THIS DOCUMENT ALSO
IS AN UNPUBLISHED WORK OF FTC. FTC INTENDS TO .X .1
Do not scale for dimensions.
Remove all burrs. TITLE: Tubesheet Coupling, HD
AND IS MAINTAINING THE WORK AS CONFIDENTIAL Radius all corners .025 - .035 R
INFORMATION. FTC MAYALSO SEEK TO PROTECT .XX .01 Break sharp edges:
THIS WORK AS AN UNPUBLISHED COPYRIGHT. IN .010-.025x45 or .010-.025 R
THE EVENT OF EITHER INADVERTENT OR .XXX .005

DWG #: TS-SS6-CPLR-2.38HD-Y.YY
DELIBERATE PUBLICATION, FTC INTENDS TO
ENFORCE ITS RIGHTS TO THIS WORK UNDER THE ANGLE 1
COPYRIGHT LAWS AS A PUBLISHED WORK. THOSE FRACTION 1/16
HAVING ACCESS TO THIS WORK MAY NOT COPY,
125
Sheet1
USE OR DISCLOSE THE INFORMATION IN THIS WORK
SURFACE FINISH
R. FISHER
UNLESS EXPRESSLY AUTHORIZED BY FTC.
1
CHECKED APPROVED OF

DATE NO REVISION BY APP © 2015 FILTRATION TECHNOLOGY CORPORATION THIRD ANGLE PROJECTION
DRAWN
BY: DATE: 9/18/17 SCALE: NTS Material: 316SS