Scribd
Upload
55 views3 pages

Lesson Plan: Veer Surendra Sai University of Technology

This document is a lesson plan for a second year engineering mechanics course taught at Veer Surendra Sai University of Technology. The course is taught over a 15 week period from January to April 2015, with 4 contact hours per week. The course is divided into 4 modules covering topics in concurrent forces on a plane, parallel forces on a plane, general cases of forces on a plane, and rectilinear and curvilinear translation. Module 1 covers concurrent forces and takes 10 classes, Module 2 covers parallel forces and takes 7 classes, Module 3 covers general cases of forces and takes 11 classes, and Module 4 covers translation and takes 12 classes. The lesson plan lists the topics and corresponding class periods for each module.

Uploaded by

santhi saranya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
55 views3 pages

Lesson Plan: Veer Surendra Sai University of Technology

This document is a lesson plan for a second year engineering mechanics course taught at Veer Surendra Sai University of Technology. The course is taught over a 15 week period from January to April 2015, with 4 contact hours per week. The course is divided into 4 modules covering topics in concurrent forces on a plane, parallel forces on a plane, general cases of forces on a plane, and rectilinear and curvilinear translation. Module 1 covers concurrent forces and takes 10 classes, Module 2 covers parallel forces and takes 7 classes, Module 3 covers general cases of forces and takes 11 classes, and Module 4 covers translation and takes 12 classes. The lesson plan lists the topics and corresponding class periods for each module.

Uploaded by

santhi saranya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

VEER SURENDRA SAI UNIVERSITY OF TECHNOLOGY

LESSON PLAN
Semester >>2nd Year >> 2015 Contact Hours per week >>4
(B.Tech)
Branch >>
Sub: Engineering Total Credit >>4
Mechanics Mechanical Engineering

TEACHER Dr.Pragyan Paramita Mohanty


Period Jan 2015-April 2015
Recommended Text book:
books >>
1. Engineering mechanics: S Timoshenko & Young; 4th Edition (international
edition) MC Graw Hill.

Reference books:

1. Fundamental of Engineering mechanics (2nd Edition): S Rajesekharan & G


Shankara Subramanium; Vikas Pub. House Pvt ltd.
2. Engineering mechanics: K.L. Kumar; Tata MC Graw Hill.

Sl. Lecture No. Topics to be covered No. of Classes


No.
MODULE-1 10
1 Lecture-01 Introduction to mechanics
2 Lecture-02 Concurrent forces on a plane: Composition, resolution
Lecture-03 Concurrent forces on a plane: equilibrium of concurrent
3
forces
Lecture-04 Concurrent forces on a plane: Problems on composition,
4
resolution and equilibrium of concurrent forces
Lecture-05 Concurrent forces on a plane: Problems on composition,
5
resolution and equilibrium of concurrent forces
6 Lecture-06 Concurrent forces on a plane: Method of Projections
Lecture-07 Concurrent forces on a plane: Equilibrium of three forces in
7
a plane
Lecture-08 Concurrent forces on a plane: Problems on methods of
8
projection and equilibrium of coplanar forces
Lecture-09 Concurrent forces on a plane: Problems on methods of
9
projection and equilibrium of coplanar forces
Lecture-10 Concurrent forces on a plane: Method of moments, Problems
10
on method of moments
MODULE-2
11 Lecture-12 Concurrent forces on a plane: Friction
12 Lecture-13 Concurrent forces on a plane: Problems on friction 7
Lecture-14 Parallel forces on a plane: General case of parallel forces
13
Lecture-15 Parallel forces on a plane: Center of parallel forces and center
14
of gravity
Lecture-15 Parallel forces on a plane: Center of parallel forces and center
15
of gravity
Lecture-16 Parallel forces on a plane: Centroid of composite plane
15
figure and curves
Lecture-17 Class Test on Module-2
16
MODULE-3
Lecture-18 General case of forces on a plane: Composition and 11
17
equilibrium of forces in a plane, plane trusses, method of joints
18 Lecture-19 Problems on truss(method of joint)
19 Lecture-20 General case of forces on a plane: method of sections
20 Lecture-21 Problems on truss(method of section)
21 Lecture-22 General case of forces on a plane: plane frame
22 Lecture-23 Problems on truss(method of frame)
Lecture-24 General case of forces on a plane: principle of virtual work,
23 equilibrium of ideal systems.

24 Lecture-25 Problems on virtual work


Lecture 27 Moments of inertia: Plane figure with respect to an axis in its
25
plane and perpendicular to the plane
26 Lecture 28 Moments of inertia: parallel axis theorem, Problems
27 Lecture 29 Moments of inertia: Problems
MODULE-4
28 Lecture 28 Rectilinear Translation: Kinematics, principle of dynamics, 12
29 Lecture 29 Rectilinear Translation: D Alembert’s Principle
30 Lecture 30 Problems
31 Lecture 31 Rectilinear Translation: momentum and impulse
32 Lecture-32 Problems
33 Lecture-33 Rectilinear Translation: work and energy, impact,problems
34 Lecture-34 Curvilinear translation: Kinematics, equation of motion,
35 Lecture 35 Curvilinear translation: projectile
Lecture-36 Curvilinear translation: D Alembert’s principle of
36
curvilinear motion.
37 Lecture-37 D Alembert’s principle of curvilinear motion.
38 Lecture-38 Kinematics of rotation of rigid body
39 Lecture-39 Class Test on Module-4
Tips for final exams
40
Signature of Teacher

You might also like