II Solid Geometry

St.
Joseph’s College For Women ( Autonomous ) , Visakhapatnam

II SEMESTER MATHEMATICS TIME: 5 Hrs/Week
M 2301 (4) SOLID GEOMETRY Max. Marks : 100
w.e.f 2016-2017
SYLLABUS
OBJECTIVES : To enable the students
a. To know the basics of Solid Geometry
b. To understand the theorems and problems
c. To apply the knowledge in Computer Sciences and Bio-Engineering
d. The geometry of the pyramid is that of a square pyramid and provides
an opportunity to explore the properties of pyramids
f. In ancient Greece the philosopher Plato described the three-
dimensional figures that later became known as the Platonic Solids as
the basis for the Greek four elements: earth, air, fire and water.
UNIT – I : The Plane :
Equation of plane in terms of its intercepts on the axis, Equations of the plane through the
given points, Length of the perpendicular from a given point to a given plane, Bisectors of angles
between two planes, Combined equation of two planes, Orthogonal projection on a plane.
UNIT – II : The Line :
Equation of a line; Angle between a line and a plane; The condition that a given line may
lie in a given plane; The condition that two given lines are coplanar; Number of arbitrary
constants in the equations of straight line; Sets of conditions which determine a line; The shortest
distance between two lines; The length and equations of the line of shortest distance between two
straight lines; Length of the perpendicular from a given point to a given line; Intersection of three
planes; Triangular Prism.
UNIT – III : Sphere :
Definition and equation of the sphere; Equation of the sphere through four given points;
Plane sections of a sphere; Intersection of two spheres; Equation of a circle; Sphere through a
given circle; Intersection of a sphere and a line; Power of a point; Tangent plane; Plane of
contact; Polar plane; Pole of a Plane; Conjugate points; Conjugate planes; Angle of intersection
of two spheres; Conditions for two spheres to be orthogonal; Radical plane; Coaxial system of
spheres; Simplified from of the equation of two spheres.
UNIT – IV : Cones :
Definitions of a cone; vertex; guiding curve; generators; Equation of the cone with a
given vertex and guiding curve; Enveloping cone of a sphere; Equations of cones with vertex at
origin are homogenous; Condition that the general equation of the second degree should
represent a cone; Condition that a cone may have three mutually perpendicular generators;
Intersection of a line and a quadric cone; Tangent lines and tangent plane at a point; Condition
that a plane may touch a cone; Reciprocal cones; Intersection of two cones with a common
vertex; Right circular cone; Equation of the right circular cone with a given vertex; axis and
semi-vertical angle.
UNIT – V : Cylinders :
Definition of a cylinder; Equation to the cylinder whose generators intersect a given

conic and are parallel to a given line; Enveloping cylinder of a sphere; The right circular
cylinder; Equation of the right circular cylinder with a given axis and radius. The general
equation of the second degree and the various surfaces represented by it, shapes of some
surfaces, Nature of Ellipsoid, Nature of Hyperboloid of one sheet.
Prescribed Text Book : V Krishna Murthy & Others “A text book of Mathematics for BA/B.Sc
Vol 1, Published by S. Chand & Company, New Delhi. (Sem II – 2016)
Reference Books :
1. Analytical Solid Geometry by Shanti Narayan and P.K. Mittal Published by S. Chand &
Company Ltd. Seventeenth Edition. Sections :- 2.4, 2.7, 2.9, 3.1 to 3.8, 6.1 to 6.9, 7.1 to 7.8.
- 2015
2. P.K. Jain and Khaleel Ahmed, “A text Book of Analytical Geometry of Three Dimensions”,
Wiley Eastern Ltd., 1999.
3. Co-ordinate Geometry of two and three dimensions by P. Balasubrahmanyam, K.Y.
Subrahmanyam, G.R. Venkataraman published by Tata-MC Gran-Hill Publishers Company
Ltd., New Delhi. (2000)
St. Joseph’s College For Women ( Autonomous ) , Visakhapatnam
II SEMESTER MATHEMATICS TIME: 1 Hr/Week
M 2351 (1) SOLID GEOMETRY Max. Marks : 50
w.e.f 2016-2017 PRACTICAL SYLLBUS
( AD batch) COURSE CONTENT
UNIT – I :
The Plane : Equation of plane in terms of its intercepts on the axis, Equations of
the plane through the given points, Length of the perpendicular from a given point
to a given plane, Bisectors of angles between two planes, Combined equation of
two planes
UNIT – II :
The Line : Equation of a line; Angle between a line and a plane; The condition
that a given line may lie in a given plane; The condition that two given lines are
coplanar; Sets of conditions which determine a line; The shortest distance between
two lines; The length and equations of the line of shortest distance between two
straight lines; Length of the perpendicular from a given point to a given line;
Intersection of three planes; Triangular Prism.
UNIT – III :
Sphere : Definition and equation of the sphere; Equation of the sphere through
four given points; Plane sections of a sphere; Intersection of two spheres; Equation
of a circle; Sphere through a given circle; Intersection of a sphere and a line;
Tangent plane; Plane of contact; Polar plane; Pole of a Plane; Conjugate points;
Conjugate planes; Angle of intersection of two spheres; Conditions for two spheres
to be orthogonal; Radical plane; Coaxial system of spheres
UNIT – IV :
Cones : Definitions of a cone; vertex; guiding curve; generators; Equation of the

cone with a given vertex and guiding curve; Enveloping cone of a sphere;
Equations of cones with vertex at origin are homogenous; Condition that the
general equation of the second degree should represent a cone; Condition that a
cone may have three mutually perpendicular generators; Intersection of a line and a
quadric cone; Tangent lines and tangent plane at a point; Condition that a plane
may touch a cone; Reciprocal cones; Intersection of two cones with a common
vertex; Right circular cone; Equation of the right circular cone with a given
vertex; axis and semi-vertical angle.
UNIT – V :
Cylinders : Definition of a cylinder; Equation to the cylinder whose generators

intersect a given conic and are parallel to a given line; Enveloping cylinder of a
sphere; The right circular cylinder; Equation of the right circular cylinder with a
given axis and radius.
Prescribed Text Book :
V Krishna Murthy & Others “A text book of Mathematics for BA/ B.Sc Vol 1,
Published by S. Chand & Company, New Delhi. (Sem II – 2016)
Reference Books :
1. Analytical Solid Geometry by Shanti Narayan and P.K. Mittal Published

by S. Chand & Company Ltd. Seventeenth Edition.
Sections :- 2.4, 2.7, 2.9, 3.1 to 3.8, 6.1 to 6.9, 7.1 to 7.8. (2015)
2. P.K. Jain and Khaleel Ahmed, “A text Book of Analytical Geometry of Three
Dimensions”, Wiley Eastern Ltd., (1999).
3. Co-ordinate Geometry of two and three dimensions by P. Balasubrahmanyam,
K.Y. Subrahmanyam, G.R. Venkataraman published by Tata-MC Gran-Hill
Publishers Company Ltd., New Delhi. (2000)

II Solid Geometry

Uploaded by

Copyright:

Available Formats

II Solid Geometry

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

II Solid Geometry

Uploaded by

Copyright:

Available Formats

What are the main topics covered in the Solid Geometry syllabus?

What are the different types of surfaces discussed in the text?

St.

Joseph’s College For Women ( Autonomous ) , Visakhapatnam

UNIT – I : The Plane :

UNIT – II : The Line :

UNIT – III : Sphere :

Definition of a cylinder; Equation to the cylinder whose generators intersect a given

Cones : Definitions of a cone; vertex; guiding curve; generators; Equation of the

Cylinders : Definition of a cylinder; Equation to the cylinder whose generators

Prescribed Text Book :

1. Analytical Solid Geometry by Shanti Narayan and P.K. Mittal Published

You might also like