Scribd
Upload
300 views1 page

Centrifugal Fan

This document provides specifications for a 12-bladed centrifugal fan impeller. It will have 12 blades equally spaced around a backplate. The impeller will be constructed of Grade 250 steel with a surface area of 1.7 square meters. It will weigh 28.5 kg and have a total inertia of 1.28 kg-m^2. The fan is designed to operate at 1928 RPM.

Uploaded by

Musheer Basha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
300 views1 page

Centrifugal Fan

This document provides specifications for a 12-bladed centrifugal fan impeller. It will have 12 blades equally spaced around a backplate. The impeller will be constructed of Grade 250 steel with a surface area of 1.7 square meters. It will weigh 28.5 kg and have a total inertia of 1.28 kg-m^2. The fan is designed to operate at 1928 RPM.

Uploaded by

Musheer Basha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

12 BLADES EQUALLY SPACED

* STRAIGHT
B
*2
67 BLADE TIP 4

BLADE MATERIAL : 3 TH'K Grade 250


BACKPLATE MATERIAL : 5 TH'K Grade 250
5 R439
SHROUD MATERIAL : 3 TH'K Grade 250

26
3
SURFACE AREA FOR PAINTING : 1.7 M^2
609 O/DIA TOTAL IMPELLER WEIGHT : 28.5 KG
BACKPLATE
67 TOTAL IMPELLER INERTIA : 1.28 KG.M^2
CLASS 2 FAN CONSTRUCTION.

R30
R238 DYNAMIC BALANCE TO :

1
GRADE 4.0 TOLERANCE = 260 G.MM IN EACH PLANE
FAN DESIGN SPEED = 1928 RPM

17°
5 TH'K SUPPORT DISK
RADIUS NOSE
A AT
E
R1 42 PL
AT
SH 59 R1 ACK
RO B
U AT
D

BLADE LAYOUT VIEW ON ARROW A


ANTI CLOCKWISE (ACW) FAN HANDING
WHEN VIEWED FROM DRIVE SIDE
WELD IN HUB W16/1615-40

3
3

3
3

VIEW ON ARROW B
(NOT TO SCALE)
WELD NOTE : BLADE FULLY WELDED TO BACKPLATE AND FRONT PLATE ALL ROUND.

DRAWN DATE
REVISION
27-05-19
SCALE JOB NO. ALPHATECH SYSTEMS A
1 : 3.5 ASH FAN 3rd ANGLE PROJECTION

THIS DRAWING IS THE PROPERTY OF


SWSI-BCP108-620/97-100 DRG No
ALPHATECH SYSTEMS
A 27-05-19 ORIGINAL ISSUE IMPELLER ASSEMBLY DETAILS
AND MUST NOT BE USED OR
REPRODUCED WITHOUT PERMISION
ASH FAN IMPELLER FOR 10TPH
REV. DATE DESCRIPTION

You might also like