0% found this document useful (0 votes)
55 views2 pages

Active Bandpass Filter

An active band pass filter circuit was designed with a bandwidth of 5KHz. Readings were taken at various frequencies between 2-10KHz. The filter passed frequencies between 2-5KHz with gains between 2.3-10.3 and phases between 90-0.05 degrees. Frequencies below 2KHz and above 5KHz were attenuated, with gains dropping and phases shifting outside the pass band. Graphs clearly showed the gain and phase change over the frequency range, confirming the filter was functioning as a band pass filter within the specified bandwidth.

Uploaded by

Eysha qureshi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
55 views2 pages

Active Bandpass Filter

An active band pass filter circuit was designed with a bandwidth of 5KHz. Readings were taken at various frequencies between 2-10KHz. The filter passed frequencies between 2-5KHz with gains between 2.3-10.3 and phases between 90-0.05 degrees. Frequencies below 2KHz and above 5KHz were attenuated, with gains dropping and phases shifting outside the pass band. Graphs clearly showed the gain and phase change over the frequency range, confirming the filter was functioning as a band pass filter within the specified bandwidth.

Uploaded by

Eysha qureshi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Active band pass filter

Design an active band pas filter with a bandwidth of 5KHz and take appropriate number of
readings.

BAT1 BAT2

1.5V 1.5V

U1
C1

7
1
3
6
R4
10nf 2
10k

4
5
LM741
V1
VSINE
R2
10k

R3 C2
R1 10k 10nf
10k

Observations and calculations:

1
fc=
2 π RC
Let C=10nF, R4=1.9Kohm,R2=51Kohm,R3=11.2Kohm, R1=5.3Kohm

Frequency K (Hz) Vout (V) Vin (V) Gain (Av) Phase φ


2 3.3 1.4 2.3 90
3 4.1 1.4 9.5 84
4 4.5 1.4 10.3 72
5 4.5 1.4 10.2 0.05
6 4.52 1.4 10.2 -82
7 4.3 1.4 9.71 -75
8 4.1 1.4 9.33 -50
10 3.6 1.4 2.6
Graphical Representation:

100
Frequency verses phase plot
50
phase

-50

-100
2 3 4 5 6 7 8 9 10
Frequency

15
Frequency verses gain plot

10
Gain

0
2 3 4 5 6 7 8 9 10
Frequency

Conclusion:

In this lab we were given to design a circuit a band pass filter for 2 kHz cutoff frequency and acquired the
output on interest of frequency band and reached upon the conclusion that it pass only frequencies of
interest .The phase difference had taken between input and output increases as the frequency rises.
Frequency attenuation was -3dB and the phase difference between varied phase between 90 and -90.

You might also like