BONNETED KNIFE GATE VALVE - UNI DIRECTIONAL

SERIES 3 METAL SEAT - SERIES 4U - RESILIENT SEAT

FLOW CONTROL
COMPONENTS Model 83W & Model 84UW

General

Series 3 & Series 4U bonnet Knife Gate Valves are a uni-

directional valves designed for isolation application where Solid-
Liquid mixes, corrosive, abrasive, viscous liquid, abrasive slurries,
pulp stock and dry materials are involved.

The Bonnet is cast or fabricated depending on valve size and

pressure rating of the valve. Sealing to atmosphere is achieved
using a round gland sealing arrangement on top of the bonnet.
This assures very tight sealing which is not normally feasible on
standard knife gate valves with a large rectangular packing area.

Bonnet valves are generally used for buried services where

backfill covers the valve and also suitable for application requiring
a high level of gland tightness such as dangerous and toxic gases.
The bonnet also prevents internal corrosion from fluid handled.

Flush ports also provided to clean the bonnet periodically.

Purging can be made with air, steam, liquids, etc. depending on
the fluid handled.

Applications
• Pulp and Paper
• Power plants
• Mining
• Chemical plants
• Wastewater
• Food and Beverage
• etc.

Technical Specifications
Size : 6” to 24”

End Style : Full Lugged

Working Pressure : 2” to 24” - 150 Psi (10 bar)

Standard flange connection : ANSI B16.5 (class 150) and

others on request

Seat : Metal / Resilient

Design conforms to : MSS SP-81

KNIFE GATE VALVE

Page 1 of 9
 BONNETED KNIFE GATE VALVE - UNI DIRECTIONAL
SERIES 3 METAL SEAT - SERIES 4U - RESILIENT SEAT
FLOW CONTROL
COMPONENTS Model 83W & Model 84UW

Test Specifications
Body Shell Test : As per MSS SP-81
Seat Leakage Test : As per MSS-SP-81

All valves are tested prior to shipping in accordance with the quality system standard followed by
quality control department to meet international standards.

Design Features

BODY:
One piece integrally cast stainless steel body with reinforced ribs in larger diameters for additional
strength, internal cast gate wedges and guides allows for tighter shutoff, The Flow Bore and Internal
design of the body ensures smooth flow without any restriction.

GATE:
Stainless steel gate is standard. Gates machined and polished for a greater sealing between the gate
and packing. Bottom of the gate edge is machined to a bevel to cut through solids for a tighter seal in
the closed position.

FOR VALVE PACKING:

Standard braided PTFE impregnated fiber with Viton (or) nitrile wiper ring to ensure the tight sealing
and braided packing is available in a wide range of materials. Wiper ring provided to assist sealing
during working and static conditions.

FOR BONNET PACKING:

Standard braided PTFE impregnated fiber packing provided on top of the bonnet to ensure the very
tight sealing to atmosphere.

STEM:
The standard stainless steel stem offers a long corrosion resistant life. As an optional feature for
rising stem hand wheel actuators, stem protector can be provided for additional protection from dust
collection on the stem.

ACTUATORS:
Hand wheel operators can be easily replaced with gear operator or pneumatic actuator or electric
actuator and valves can be supplied with a standard mounting kit to allow for installation on site.

KNIFE GATE VALVE

Page 2 of 9
 BONNETED KNIFE GATE VALVE - UNI DIRECTIONAL
SERIES 3 METAL SEAT - SERIES 4U - RESILIENT SEAT
FLOW CONTROL
COMPONENTS Model 83W & Model 84UW

Options
Throttling:
V port or Pentagonal port design can be provided for valve throttling application to control the flow.
Selection of the port and angle based on flow media and application. Please consult Technical Team for
port and angle selection.

Flush ports:
Allow for cleaning of solids trapped within the body cavities that can obstruct the flow or prevent the
valve from closing. Purging can be made with air, steam, liquids, etc. depending on the fluid handled.

Surface Treatments:
Valve components can be protected or coated for a longer life expectancy, depending on application
and the service conditions.
• The epoxy coating on all non stainless steel components and electrostatically applied making them
Corrosion resistant with a high quality surface finish.
• Gates can be provided with different coatings to improve wear and corrosion resistance, non-
adherence properties etc.
• Please consult Technical Team for coating or surface treatment for special application.

Parts List for Bonneted Knife Gate Valve

Sl. No. Part Details

1 Body CF8 / CF8M / CG8M
2 Gate SS 304 / 316 / 317
3 Packing (Body) PTFE Imp. Syn. Fibre
4 Gasket Non Asbestos
5 Clevis CF8
6 Bonnet CF8 / CF8M / CG8M
7 Stem SS 304
8 Packing (Bonnet) PTFE Imp. Syn. Fibre
9 Yoke CF8 / WCB / DI
10 Bonnet Gland CF8 / CF8M / CG8M
11 Sleeve Housing CF8 / WCB / DI
12 Stem sleeve SAE 660
13 Hand wheel DI
14 Grease Nipple Plated Steel
15 Hand wheel Key Plated Steel
16 Hand wheel Nut Plated Steel

KNIFE GATE VALVE

Page 3 of 9
 BONNETED KNIFE GATE VALVE - UNI DIRECTIONAL
SERIES 3 METAL SEAT - SERIES 4U - RESILIENT SEAT
FLOW CONTROL
COMPONENTS Model 83W & Model 84UW

Valve Actuation Accessories

Manual Actuation • Actuator manual override

• Hand wheel • Limit Switches
• Chain wheel • Proximity Switches
• Bevel Gear • Solenoid valves
• Air filter regulators
Automatic Actuation • Locking device
• Electric actuation
• Pneumatic actuation
• Hydraulic actuation

Seat Type

Metal to Metal - 81W series

• High temperature
• High density media application
• When full tightness is not required

Metal to Soft - 82W series

• Zero Leakage
• Limited Temperature
• Replaceable seat Viton/EPDM

KNIFE GATE VALVE

Page 4 of 9
 BONNETED KNIFE GATE VALVE - UNI DIRECTIONAL
SERIES 3 METAL SEAT - SERIES 4U - RESILIENT SEAT
FLOW CONTROL
COMPONENTS Model 83W & Model 84UW

Hand wheel Actuation Dimension details

Available for valve sizes 6” to 24”

Standard hand wheel actuator

• Hand wheel
• Stem
• Stem sleeve

Options:
• Chain wheel
• Non-rising Stem
• Stem Protector
• Locking Device

Size: Inch / mm A B C D E F
6" 6.00 2.25 10.7 5.2 14.0 37.2
150 150.0 57.2 273 131 356 945
8" 8.00 2.75 12.7 5.2 14.0 47.4
200 200.0 70.0 324 131 356 1205
10" 10.00 2.75 15.0 5.3 18.0 56.1
250 250.0 70.0 383 135 458 1425
12" 11.4 3.00 17.0 5.6 18.0 62.6
300 290.0 76.2 432 143 458 1590
14" 12.6 3.00 18.5 6.4 20.0 71.9
350 320.0 76.2 470 162 508 1825
16" 14.4 3.50 21.2 8.0 20.0 78.3
400 365.0 89.0 540 205 508 1990
18" 16.1 3.50 23.3 7.5 24.0 94.0
450 410.0 89.0 591 191 610 2385
20" 18.7 4.50 26.0 7.5 24.0 108.2
500 475.0 114.3 661 191 610 2750
24" 22.6 4.50 30.0 7.5 30.0 128.0
600 575.0 114.3 762 216 762 3250

KNIFE GATE VALVE

Page 5 of 9
 BONNETED KNIFE GATE VALVE - UNI DIRECTIONAL
SERIES 3 METAL SEAT - SERIES 4U - RESILIENT SEAT
FLOW CONTROL
COMPONENTS Model 83W & Model 84UW

Gear Actuation Dimension details

Available for valve sizes 6” to 24”

Standard Bevel Gear Actuation:

• Stem
• Yoke
• Bevel Gear Actuator with Hand wheel

Options:
• Chain wheel
• Non-rising stem
• Locking device

Size: Inch / mm A B C D E F
6" 6.00 2.25 10.7 5.2 11.8 40.7
150 150.0 57.2 273 131 300 1035
8" 8.00 2.75 12.7 5.2 11.8 49.6
200 200.0 70.0 324 131 300 1260
10" 10.00 2.75 15.0 5.3 11.8 60.6
250 250.0 70.0 383 135 300 1540
12" 11.4 3.00 17.0 5.6 15.7 69.7
300 290.0 76.2 432 143 400 1770
14" 12.6 3.00 18.5 6.4 15.7 76.4
350 320.0 76.2 470 162 400 1940
16" 14.4 3.50 21.2 8.0 19.7 84.3
400 365.0 89.0 540 205 500 2140
18" 16.1 3.50 23.3 7.5 19.7 95.3
450 410.0 89.0 591 191 500 2420
20" 18.7 4.50 26.0 7.5 19.7 105.7
500 475.0 114.3 661 191 500 2685
24" 22.6 4.50 30.0 7.5 19.7 125.0
600 575.0 114.3 762 216.0 500 3175

KNIFE GATE VALVE

Page 6 of 9
 BONNETED KNIFE GATE VALVE - UNI DIRECTIONAL
SERIES 3 METAL SEAT - SERIES 4U - RESILIENT SEAT
FLOW CONTROL
COMPONENTS Model 83W & Model 84UW

Pneumatic Actuation Dimension details

Available for valve size 6” to 24”

Standard pneumatic Actuation:

• Stainless steel Barrels
• Stainless steel Piston Rod
• Cast or ductile iron or steel End Cover

Supply air Pressure : Minimum 4 kg/cm2

2
: Maximum 10 kg/cm
Options:
• Air filter with regulators
• Solenoid valves
• Mechanical limit switch
• Proximity switch
• Manual override
• Fail safe systems
• Locking device

Size: Inch / mm A B C D E F Cylinder: Dia/Stroke

6" 6.00 2.25 10.7 5.2 6.5 44.5 4 / 2.5
150 150.0 57.2 273 131 165 1130 100 / 65
8" 8.00 2.75 12.7 5.2 9.1 53.9 4 / 3.5
200 200.0 70.0 324 131 230 1370 100 / 90
10" 10.00 2.75 15.0 5.3 10.8 66.3 4 / 4.5
250 250.0 70.0 383 135 274 1685 100 / 115
12" 11.4 3.00 17.0 5.6 13.2 75.8 5 / 5.5
300 290.0 76.2 432 143 335 1925 125 / 140
14" 12.6 3.00 18.5 6.4 15.2 83.5 5 / 6.3
350 320.0 76.2 470 162 385 2120 125 / 160
16" 14.4 3.50 21.2 8.0 15.2 91.3 6 / 8.8
400 365.0 89.0 540 205 385 2320 160 / 220
18" 16.1 3.50 23.3 7.5 17.1 92.0 8 / 10.8
450 410.0 89.0 591 191 435 2335 200 / 270
20" 18.7 4.50 26.0 7.5 17.1 103.1 8 / 12.8
500 475.0 114.3 661 191 435 2620 200 / 320
24" 22.6 4.50 30.0 8.5 19.1 119.7 10 / 14.9
600 575.0 114.3 762 216.0 485 3040 250 / 280

KNIFE GATE VALVE

Page 7 of 9
 BONNETED KNIFE GATE VALVE - UNI DIRECTIONAL
SERIES 3 METAL SEAT - SERIES 4U - RESILIENT SEAT
FLOW CONTROL
COMPONENTS Model 83W & Model 84UW

Electric Actuation Dimension details

Available for valve size 6” to 24”

Standard Electric Actuation:

• Electric motor
• Manual emergency operation
• Limit switches (open/closed)
• Torque switches
• Rising stem
• Yoke
• Stem Protector

Option:
• Non rising stem
• Mechanical Limits switch

Size: Inch / mm A B C D E F G H J
6" 6.00 2.25 10.7 5.2 47.4 13.8 12.6 11.8 7.1
150 150.0 57.2 273 131 1205 350 320 300 180
8" 8.00 2.75 12.7 5.2 56.5 13.8 12.6 11.8 7.1
200 200.0 70.0 324 131 1435 350 320 300 180
10" 10.00 2.75 15.0 5.3 67.0 13.8 12.6 11.8 7.1
250 250.0 70.0 383 135 1700 350 320 300 180
12" 11.4 3.00 17.0 5.6 75.8 13.8 12.6 11.8 7.1
300 290.0 76.2 432 143 1925 350 320 300 180
14" 12.6 3.00 18.5 6.4 81.9 13.8 12.6 11.8 7.1
350 320.0 76.2 470 162 2080 350 320 300 180
16" 14.4 3.50 21.2 8.0 94.9 21.7 13.8 13.8 8.9
400 365.0 89.0 540 205 2410 550 350 350 225
18" 16.1 3.50 23.3 7.5 104.3 21.7 13.8 13.8 8.9
450 410.0 89.0 591 191 2650 550 350 350 225
20" 18.7 4.50 26.0 7.5 116.5 21.7 13.8 13.8 8.9
500 475.0 114.3 661 191 2960 550 350 350 225
24" 22.6 4.50 30.0 7.5 133.8 25.6 13.8 15.0 12.2
600 575.0 114.3 762 216.0 3400 650 350 380 310

KNIFE GATE VALVE

Page 8 of 9
 BONNETED KNIFE GATE VALVE - UNI DIRECTIONAL
SERIES 3 METAL SEAT - SERIES 4U - RESILIENT SEAT
FLOW CONTROL
COMPONENTS Model 83W & Model 84UW

Flange and Bolting Details (ASME B 16.5 – Class 150)

Size: Inch / mm K nº Thread T

6" 9.50 0.50
8 3/4‐10 UNC 2‐6
150 241.3 12.7
8" 11.75 0.50
8 3/4‐10 UNC 2‐6
200 298.5 12.7
10" 14.25 0.50
12 7/8‐9 UNC 4‐8
250 362 12.7
12" 17.00 0.50
12 7/8‐9 UNC 4‐8
300 431.8 12.7
14" 18.75 0.51
12 1‐8 UNC 4‐8
350 476.3 13.0
16" 21.25 0.51
16 1‐8 UNC 6 ‐ 10
400 539.8 13.0
18" 22.75 0.51
16 1 1/8 ‐7 UNC 6 ‐ 10
450 577.8 13.0
20" 25.00 0.98
20 1 1/8 ‐7 UNC 8 ‐ 12
500 635 25.0
24" 29.50 0.98
20 1 1/4 ‐7 UNC 8 ‐ 12
600 749.3 25.0

Contact us
Flow Link Systems Private Limited
189/1A-C, Uthupalayam, Arasur post, Avinashi Road, Coimbatore - 641 407, Tamilnadu, INDIA.
Phone: 0422 - 2360707, 2360011, +91 98947 90832, Email: [email protected]
FLS – 09/17 ED 01 [email protected] www.flowlinksystems.com
Page 9 of 9