Scribd
Upload
535 views

EI 6702-Logic and Distributed Control System

This document provides an overview of the objectives and topics covered in the course EI6702 Logic and Distributed Control System. The 5 units of the course cover: 1. Programmable logic controllers, their components, architecture, programming languages, and applications. 2. Computer controlled systems including data acquisition, supervisory control, direct digital control and SCADA systems. 3. Distributed control systems including various architectures, local control units, process interfacing issues and communication facilities. 4. Interfaces in distributed control systems including operator interfaces, displays, engineering interfaces and factors to consider when selecting a DCS. The course aims to provide knowledge on PLCs, computer controlled systems, distributed

Uploaded by

MnskSaro
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
535 views

EI 6702-Logic and Distributed Control System

This document provides an overview of the objectives and topics covered in the course EI6702 Logic and Distributed Control System. The 5 units of the course cover: 1. Programmable logic controllers, their components, architecture, programming languages, and applications. 2. Computer controlled systems including data acquisition, supervisory control, direct digital control and SCADA systems. 3. Distributed control systems including various architectures, local control units, process interfacing issues and communication facilities. 4. Interfaces in distributed control systems including operator interfaces, displays, engineering interfaces and factors to consider when selecting a DCS. The course aims to provide knowledge on PLCs, computer controlled systems, distributed

Uploaded by

MnskSaro
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

EI6702 LOGIC AND DISTRIBUTED CONTROL SYSTEM L T P C

3 0 0 3

OBJECTIVES:
To give an introductory knowledge on Programmable Logic Controller (PLC) and their
programming languages
To give adequate knowledge about applications of PLC
To give basic knowledge about Computer Controlled Systems
To give basic knowledge on the architecture and local control unit of Distributed Control System
(DCS)
To give adequate information with respect to interfaces used in DCS

UNIT I PROGRAMMABLE LOGIC CONTROLLER 9


Evolution of PLCs – Components of PLC – Architecture of PLC – Discrete and analog I/O modules –
Programming languages -Ladder diagram – Function block diagram (FBD) - Programming timers and
counters

UNIT II APPLICATIONS OF PLC 9


Instructions in PLC – Program control instructions, math instructions, data manipulation Instructions,
sequencer and shift register instructions – Case studies in PLC

UNIT III COMPUTER CONTROLLED SYSTEMS 9


Basic building blocks of computer controlled systems – Data acquisition system – Supervisory control
– Direct digital control- SCADA:- Hardware and software, Remote terminal units, Master
Station and Communication architectures.

UNIT IV DISTRIBUTED CONTROL SYSTEM 9


DCS – Various Architectures – Comparison – Local control unit – Process interfacing issues –
Communication facilities

UNIT V INTERFACES IN DCS 9


Operator interfaces - Low level and high level operator interfaces – Displays - Engineering interfaces
– Low level and high level engineering interfaces – Factors to be considered in selecting DCS – Case
studies in DCS

TOTAL: 45 PERIODS
OUTCOMES:
Ability to understand and analyze Instrumentation systems and their applications to various
industries.
Ability to understand and analyse, linear and digital electronic circuits.

TEXT BOOKS:
1. F.D. Petruzella, Programmable Logic Controllers, Tata Mc-Graw Hill, Third edition, 2010
2. Michael P. Lukas, Distributed Control Systems: Their Evaluation and Design, Van Nostrand
Reinhold Co., 1986
3. D. Popovic and V.P.Bhatkar,’ Distributed computer control for industrial Automation’ Marcel
Dekker, Inc., Newyork ,1990.

78
REFERENCES:
1. T.A. Hughes, Programmable Controllers, Fourth edition, ISA press, 2005
2. Krishna Kant, Computer Based Industrial Control, Second edition, Prentice Hall of India, New
Delhi, 2010.
3. John W. Webb and Ronald A. Reis, 'Programmable Logic Controllers, Fifth edition, Prentice Hall
of India, New Delhi, 2010.
4. John R. Hackworth and Frederick D. Hackworth Jr, Programmable Logic Controllers, Pearson,
New Delhi, 2004.
5. Clarke, G., Reynders, D. and Wright, E., “Practical Modern SCADA Protocols: DNP3,4. 60870.5
and Related Systems”, Newnes, 1st Edition, 2004.
6. E.A.Parr, Programmable Controllers, An Engineer’s Guide, Elsevier, 2013.

EC6601 VLSI DESIGN LT P C


3003
OBJECTIVES:
In this course, the MOS circuit realization of the various building blocks that is common to any
microprocessor or digital VLSI circuit is studied.
Architectural choices and performance tradeoffs involved in designing and realizing the circuits in
CMOS technology are discussed.
The main focus in this course is on the transistor circuit level design and realization for digital
operation and the issues involved as well as the topics covered are quite distinct from those
encountered in courses on CMOS Analog IC design.

UNIT I MOS TRANSISTOR PRINCIPLE 9


NMOS and PMOS transistors, Process parameters for MOS and CMOS, Electrical properties of
CMOS circuits and device modeling, Scaling principles and fundamental limits, CMOS inverter
scaling, propagation delays, Stick diagram, Layout diagrams

UNIT II COMBINATIONAL LOGIC CIRCUITS 9


Examples of Combinational Logic Design, Elmore’s constant, Pass transistor Logic, Transmission
gates, static and dynamic CMOS design, Power dissipation – Low power design principles

UNIT III SEQUENTIAL LOGIC CIRCUITS 9


Static and Dynamic Latches and Registers, Timing issues, pipelines, clock strategies, Memory
architecture and memory control circuits, Low power memory circuits, Synchronous and
Asynchronous design

UNIT IV DESIGNING ARITHMETIC BUILDING BLOCKS 9


Data path circuits, Architectures for ripple carry adders, carry look ahead adders, High speed adders,
accumulators, Multipliers, dividers, Barrel shifters, speed and area tradeoff

UNIT V IMPLEMENTATION STRATEGIES 9


Full custom and Semi custom design, Standard cell design and cell libraries, FPGA building block
architectures, FPGA interconnect routing procedures.
TOTAL: 45 PERIODS

79

You might also like