Scribd
Upload
84 views4 pages

Install Anyconnect and Certificates For Cisco VPN Access

The document provides instructions for installing the Cisco AnyConnect VPN client and certificates for VPN access. It outlines downloading and installing AnyConnect, entering login credentials to connect to VPN gateways, and loading certificates from the certificate authority server by accepting certificates and entering credentials.

Uploaded by

David
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
84 views4 pages

Install Anyconnect and Certificates For Cisco VPN Access

The document provides instructions for installing the Cisco AnyConnect VPN client and certificates for VPN access. It outlines downloading and installing AnyConnect, entering login credentials to connect to VPN gateways, and loading certificates from the certificate authority server by accepting certificates and entering credentials.

Uploaded by

David
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Install AnyConnect and Certificates for

Cisco VPN access


1. Install AnyConnect

1. Once the VPN client/Certificates are loaded you need to load the AnyConnect software. Unzip
and install the file:

Utopia, Inc.
405 Washington Blvd, Suite 203  Mundelein, Illinois 60060  Tel 847.388.3600  Fax 847.388.3601

This document contains proprietary information of Utopia, Inc. No part of this document may be reproduced, stored, copied or transmitted in
any form, without the written consent of an authorized representative.
2. Launch the Cisco Any Connect VPN client. Enter one of the hostnames below into the “Connect
to” field the click the “select” button.
a. shcvpngw3.searshc.com = Troy Cisco ASA VPN Appliance Cluster
b. shcvpngw4.searshc.com = Hoffman Estates Cisco ASA VPN Appliance Cluster

Note: Cisco AnyConnect VPN client is compatible with shcvpngw3.searshc.com and


shcvpngw4.searshc.com only

3. Type in your provided credentials and you are connected to the VPN

Utopia, Inc.
405 Washington Blvd, Suite 203  Mundelein, Illinois 60060  Tel 847.388.3600  Fax 847.388.3601

This document contains proprietary information of Utopia, Inc. No part of this document may be reproduced, stored, copied or transmitted in
any form, without the written consent of an authorized representative.
You will be taken to the below link: if not click on or paste into Internet Explorer

2. Load Certificates

1. Open browser. Click the following link to connect to the Certificate Authority Server:

https://ca.searshc.com:18005

2. You will get a warning of an untrusted page. Click Continue to the Website

3. Enter your ID and password:

Utopia, Inc.
405 Washington Blvd, Suite 203  Mundelein, Illinois 60060  Tel 847.388.3600  Fax 847.388.3601

This document contains proprietary information of Utopia, Inc. No part of this document may be reproduced, stored, copied or transmitted in
any form, without the written consent of an authorized representative.
4. Click Yes

5. This page is confirming you have the certificate exit out:

6. If you are not automatically connect go back to the Cisco VPN AnyConnect interface and enter
your credentials:

Utopia, Inc.
405 Washington Blvd, Suite 203  Mundelein, Illinois 60060  Tel 847.388.3600  Fax 847.388.3601

This document contains proprietary information of Utopia, Inc. No part of this document may be reproduced, stored, copied or transmitted in
any form, without the written consent of an authorized representative.

You might also like