Scribd
Upload
147 views1 page

Throttle Body B: Installation

The document provides instructions for removing and installing a throttle body from a vehicle. It lists 5 steps for removal: 1) disconnecting the battery ground cable, 2) removing the intercooler, 3) disconnecting sensors, 4) disconnecting coolant hoses, and 5) removing bolts securing the throttle body to the intake manifold. It notes to always use a new gasket during installation and provides the recommended tightening torque.

Uploaded by

Frank Ch Ccaico
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
147 views1 page

Throttle Body B: Installation

The document provides instructions for removing and installing a throttle body from a vehicle. It lists 5 steps for removal: 1) disconnecting the battery ground cable, 2) removing the intercooler, 3) disconnecting sensors, 4) disconnecting coolant hoses, and 5) removing bolts securing the throttle body to the intake manifold. It notes to always use a new gasket during installation and provides the recommended tightening torque.

Uploaded by

Frank Ch Ccaico
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

THROTTLE BODY

FUEL INJECTION (FUEL SYSTEMS)

2. Throttle Body B: INSTALLATION


Install in the reverse order of removal.
A: REMOVAL
1) Disconnect the ground cable from battery. NOTE:
Always use a new gasket.
Tightening torque:
8 N·m (0.8 kgf-m, 5.8 ft-lb)

FU-00009

2) Remove the intercooler. <Ref. to IN(STi)-11,


REMOVAL, Intercooler.>
FU-01075
3) Disconnect the connector from the throttle posi-
tion sensor (A) and manifold absolute pressure
sensor (B).
(B)

(A)

FU-01073

4) Disconnect the engine coolant hoses from the


throttle body.

FU-01074

5) Remove the bolts which secure the throttle body


to intake manifold.

FU(STi)-13

You might also like