Scribd Logo
Upload

Welcome to Scribd!

  • 174 views

    PECE Forum Presentation

    Uploaded by

    Kirby Sarte
    This document discusses professional engineering standards and requirements for signing and sealing plans in the Philippines. It outlines the key engineering fields that require signing, relevant codes and standards, government agencies that require sealing, and the design phases that need signatures. It also describes what should be included in submitted plans and client requirements. Finally, it proposes fees for various electronics services, broadcast/telecom facilities, industrial controls, and NTC requirements. Ethics in practice are discussed, including not signing other designs and ECEs working under PECE supervision.

    Copyright:

    © All Rights Reserved
    Download as PPSX, PDF, TXT or read online from Scribd

    PECE Forum Presentation

    Uploaded by

    Kirby Sarte
    174 views14 pages
    This document discusses professional engineering standards and requirements for signing and sealing plans in the Philippines. It outlines the key engineering fields that require signing, relevant codes and standards, government agencies that require sealing, and the design phases that need signatures. It also describes what should be included in submitted plans and client requirements. Finally, it proposes fees for various electronics services, broadcast/telecom facilities, industrial controls, and NTC requirements. Ethics in practice are discussed, including not signing other designs and ECEs working under PECE supervision.

    Original Description:

    PECE Seminar

    Original Title

    PECE Forum Presentation.ppt

    Copyright

    © © All Rights Reserved

    Available Formats

    PPSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document discusses professional engineering standards and requirements for signing and sealing plans in the Philippines. It outlines the key engineering fields that require signing, relevant codes and standards, government agencies that require sealing, and the design phases that need signatures. It also describes what should be included in submitted plans and client requirements. Finally, it proposes fees for various electronics services, broadcast/telecom facilities, industrial controls, and NTC requirements. Ethics in practice are discussed, including not signing other designs and ECEs working under PECE supervision.

    Copyright:

    © All Rights Reserved
    Download as PPSX, PDF, TXT or read online from Scribd
    Download as ppsx, pdf, or txt
    174 views14 pages

    PECE Forum Presentation

    Uploaded by

    Kirby Sarte
    This document discusses professional engineering standards and requirements for signing and sealing plans in the Philippines. It outlines the key engineering fields that require signing, relevant codes and standards, government agencies that require sealing, and the design phases that need signatures. It also describes what should be included in submitted plans and client requirements. Finally, it proposes fees for various electronics services, broadcast/telecom facilities, industrial controls, and NTC requirements. Ethics in practice are discussed, including not signing other designs and ECEs working under PECE supervision.

    Copyright:

    © All Rights Reserved
    Download as PPSX, PDF, TXT or read online from Scribd
    Download as ppsx, pdf, or txt
    You are on page 1of 14

    Professional Forum

    I. What are the different engineering


    fields/installations that would require signing
    and sealing of PECE’S?

    1. National Building Code and its IRR


    2. Due diligence reports
    II. What are the different standards and codes
    that a PECE/ECE/ECT should have learned? And
    what seminars must they attend to in order to
    gain expertise on the above.

    1. National Building Code


    2. Revised Fire Code of the Philippines of
    2008 and its IRR
    3. NFPA 72 (Fire alarm and Signalling code)
    and
    4. NFPA 101 (Life Safety Code)
    5. BICSI (TDMM and ESS)
    6. Electronics Code of the Philippines
    III. Government Agencies expected to require
    PECE to sign and seal.

    1. Office of the Building Official


    • Municipal
    • PEZA
    2. Bureau of Fire Protection
    • Fire and Life Safety Systems
    3. National Telecommunications Commission
    IV. Two phases of signing and sealing. (Before
    installation, after installation) Are we supposed
    to sign both at once?

    Design Phases
    1. Schematic Design Phase
    2. Detailed Design Phase
    3. For Construction (Required)
    4. As-Builts (Required)
    V. What do we look for in the plans submitted to
    us/to be submitted to the OBO?

    1. Floor Plan Layout


    2. Riser/Schematics System
    3. System Specifications
    VI. What should we require from the client?

    Anything/Everything that needs to be built


    should have a, Design Criteria/Guideline
    VII. What do we look at in the premises where
    installation was done?

    1. Design implementation (Layout)


    2. Testing and Commissioning
    VIII. What are we supposed to do if there are
    changes in the plan?

    1. Issue For Construction


    2. As-Built Drawings
    IX. PROPOSED FEES
    IX. PROPOSED FEES (continued)
    PECE TARIFF / RATES

    IECEP DAVAO CHAPTER

    A. ELECTRONICS SERVICES Building Construction Minimum Rate Additional


    1. Sign and Seal of Electronics Plan (up to 2nd floor only ) 3000
    2. Design, Sign and Seal of Building Electronics (up to 3rd floor only) 6000

    3. Sign and Seal of Internet Café's Electronics Plan (maximum of 10units) 1500100/unit
    4. Consultancy project cost 10% to 15%
    Minimum Acceptance Fee 5000
    Per visit charge 1500

    Alternate Billing for End Users (Commercial, Industrial & Residential)


    Description Minimum Amount Add'l node/outlet

    1. Voice, Facsimile, Cable TV, Analog CCTV, Pipe in Music 1 to 10 nodes 2500 30
    Data (PC, IP-CAM, Wire Routers, Wireless Routers)
    2. Fire Alarm System 1 to 10 smoke 2500 30
    3. Queuing Machine / Electronics Signage per display 1500 1000
    4. ATM Machines 1 to 10 2500 250
    B. Broadcast and Telecommunications Facility

    1. Sign and Seal of Cellular Site 6000


    2. Sign and Seal of Outside Plant Design 1 cabinet 30002000 / cabinet
    3. Retainership AM, FM Broadcasting and Cable TV per month 3000
    4. Sign and Seal of Technical Design for:
    a) AM, FM and TV Broadcasting Station per setup/ location 20000
    b)CATV Operation per setup/ location 20000
    c) TELCO per setup/ location 20000
    d) Internet Service Provider per setup/ location 20000
    10. Per visit charge 1500
    C. Industrial Control Main Control Branch Control
    1. Set up of Automation and Controls per setup/ location 10000 5000
    D. NTC Requirements Amount

    1. Preparation, Sign and Seal of Network Diagram / Lay-out for Radio Base stations
    and other related Wireless Stations per layout 1800
    2. Preparation, Sign and Seal of Technical Plan per location 4000
    3. NTC permit that needs PECE signature per permit 3000
    IX. PROPOSED FEES (continued…)
    X. Ethics in Practrice

    1. Is it ok to sign, somebody else’s design?


    2. ECE’s are ALWAYS under the supervision
    of PECE’s in practice, regardless of age
    or even experience.
    3. Individual designs are Intellectual
    Property rights.
    THANK YOU!

    Raymond C. Medina, PECE


    ACPE, FACPE, ASEAN-APEC
    Engineer

    You might also like