Scribd
Upload
15 views1 page

Creating Flat Harnesses: Module Overview

This document provides an overview on how to create a flattened version of a 3D harness design for documentation purposes. It discusses using location points to configure flat segments within the harness that can be flattened manually or automatically. The flattening process produces a flattened harness that only includes routed entities by default, but can also assemble connectors. Tracking tools are available to determine how many segments have been flattened and monitor the flattening process.

Uploaded by

Praveen Sreedharan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
15 views1 page

Creating Flat Harnesses: Module Overview

This document provides an overview on how to create a flattened version of a 3D harness design for documentation purposes. It discusses using location points to configure flat segments within the harness that can be flattened manually or automatically. The flattening process produces a flattened harness that only includes routed entities by default, but can also assemble connectors. Tracking tools are available to determine how many segments have been flattened and monitor the flattening process.

Uploaded by

Praveen Sreedharan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Creating Flat Harnesses Page 1 of 1

Click below to listen to the audio version (01:06):

Creating Flat Harnesses


Module Overview:
You can create a flattened version of the 3-D harness design in preparation for documenting it in a drawing.
Flattened harnesses are created by using location points to configure flat segments within the harness. The
flattening process can be completed manually or automatically. By default, flattened harnesses only include
routed entities. However, connectors can also be assembled. You can track the progress of flattening
harnesses by using information tools that determine how many segments have been flattened.

Objectives:
After successfully completing this module, you will be able to:

• Create a flat harness model.

• Use both manual and auto fan.

• Modify flattened segments.

• Assemble harness components.

• Analyze harness component operations.

• View harness information.

• Close loops.

• Investigate additional flatten features.

http://precisionlms.ecorp.cat.com/precisionlms/standard-content/coach_cp_6697620f-... 27-10-2017

You might also like