4bta3 9 G4 PDF

4BTA3.
9-G4
Description Features
The B3.9 has all the strength and reliability the genset Single Poly Vee belt drive for fan, alternator and water pump,
industry has come to expect from the B Series range. with self-tensioning idler for minimum maintenance.
The B3.9 features direct fuel injection, resulting in
cleaner, quieter and more fuel efficient performance. Stanadyne DB4 injection pump features advance mechanism
for reliable cold starting.
This engine has been built to comply
with CE certification. Spin-on fuel filter and full-flow lubricating oil filter.
This engine has been designed in Top mounted Holset HX30 turbocharger for increased power,
facilities certified to ISO9001 and fuel economy and lower smoke and noise levels.
manufactured in facilities certified to
ISO9001 or ISO9002. Coolpac Integrated Design - Products are supplied complete
with cooling package and air cleaner kit for a complete power
package. Each component has been specifically developed and
rigorously tested for G-Drive products, ensuring high
performance, durability and reliability.
Service and Support - G-Drive products are backed by an

uncompromising level of technical support and after sales
service, delivered through a world class service network.
1500 rpm (50 Hz Ratings)

Gross Engine Output Net Engine Output Typical Generator Set Output
Standby Prime Base Standby Prime Base Standby (ESP) Prime (PRP) Base (COP)
kWm/BHP kWm/BHP kWe kVA kWe kVA kWe kVA
97/130 87/117 63/85 94/127 84/113 60/81 80 100 73 91 54 68
1800 rpm (60 Hz Ratings)

Gross Engine Output Net Engine Output Typical Generator Set Output
Standby Prime Base Standby Prime Base Standby (ESP) Prime (PRP) Base (COP)
kWm/BHP kWm/BHP kWe kVA kWe kVA kWe kVA
108/145 97/130 70/94 104/140 93/125 66/89 90 113 82 103 60 75
Our energy working for you.™

www.cumminsgdrive.com
2008|Cummins G-Drive Engines|Specifications Subject to Change Without Notice|Cummins is a registered trademark of Cummins Inc.
(01/09)
General Engine Data Ratings Definitions
Type 4 cycle, in-line, Turbo Charged Emergency Standby Power (ESP):
Bore mm 102 mm (4.02 in.) Applicable for supplying power to varying
Stroke mm 120 mm (4.72 in.) electrical load for the duration of power
interruption of a reliable utility source.
Displacement Litre 3.9 litre (293.3 in.3)
Emergency Standby Power (ESP) is in
Cylinder Block Cast iron, 4 cylinder accordance with ISO 8528. Fuel Stop power in
Battery Charging Alternator 65 amps accordance with ISO 3046, AS 2789,
Starting Voltage 12 volt, 65 Amp negative ground DIN 6271and BS 5514.
Fuel System Direct injection
Fuel Filter Spin-on fuel filters with water separator Limited-Time Running Power (LTP):
Lube Oil Filter Type(s) Spin-on full flow filter Applicable for supplying power to a constant
Lube Oil Capacity (l) 10.9 electrical load for limited hours. Limited-Time
Flywheel Dimensions 3/11.5
Running Power (LTP) is in accordance with
ISO 8528.
Coolpac Performance Data Prime Power (PRP):

Applicable for supplying power to varying
Cooling System Design Jacket Water After Cooled electrical load for unlimited hours. Prime
Coolant Ratio 50% ethylene glycol; 50% water Power (PRP) is in accordance with ISO 8528.
Ten percent overload capability is available in
Coolant Capacity (l) 15.0
accordance with ISO 3046, AS 2789,
Limiting Ambient Temp.**(°C) 50 (50Hz); 55 (60Hz) DIN 6271 and BS 5514.
Fan Power (kWm) 0.6
Cooling System Air Flow (m3/s)** 1.8 (50Hz) 2.24 (60Hz) Base Load (Continuous) Power (COP):
Light duty dry replaceable element with Applicable for supplying power continuously to
Air Cleaner Type
restriction indicator a constant electrical load for unlimited hours.
** @ 13 mm H20 Continuous Power (COP) in accordance with
ISO 8528, ISO 3046, AS 2789, DIN6271 and
BS 5514.
Weight & Dimensions

Length Width Height Weight (dry)
mm mm mm kg
1110 630 870 350
Fuel Consumption 1500 (50 Hz) Fuel Consumption 1800 (60 Hz)
% kWm BHP L/ph US gal/ph % kWm BHP L/ph US gal/ph
Standby Power Standby Power
100 97 130 24 6.4 100 108 145 27 7
Prime Power Prime Power
100 87 117 22 5.7 100 97 130 24 6.3
75 65 88 16 4.2 75 73 98 18 4.8
50 44 59 11 2.8 50 48 65 14 3.7
25 22 29 6 1.6 25 24 33 7 1.8
Continuous Power Continuous Power
100 63 85 15 4.1 100 70 94 17 4.6
Cummins G-Drive Engines
Asia Pacific Europe, CIS, Middle Latin America Mexico North America
10 Toh Guan Road East and Africa Rua Jati, 310, Cumbica Cummins S. de R.L. de C.V. 1400 73rd Avenue N.E.
#07-01 Manston Park Columbus Ave Guarulhos, SP 07180-900 Eje 122 No. 200 Zona Industrial Minneapolis, MN 55432
TT International Tradepark Manston Ramsgate Brazil San Luis Potosí, S.L.P. 78090 USA
Singapore 608838 Kent CT12 5BF. UK Phone 55 11 2186 4552 Mexico Phone 1 763 574 5000
Phone 65 6417 2388 Phone 44 1843 255000 Fax 55 11 2186 4729 Phone 52 444 870 6700 USA Toll-free 1 877 769 7669
Fax 65 6417 2399 Fax 44 1843 255902 Fax 52 444 870 6811 Fax 1 763 574 5298

(01/09)
(01/09)

4bta3 9 G4 PDF

Uploaded by

Copyright:

Available Formats

4bta3 9 G4 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

4bta3 9 G4 PDF

Uploaded by

Copyright:

Available Formats

4BTA3.

Service and Support - G-Drive products are backed by an

1500 rpm (50 Hz Ratings)

1800 rpm (60 Hz Ratings)

Our energy working for you.™

Coolpac Performance Data Prime Power (PRP):

Weight & Dimensions

Cummins G-Drive Engines

Our energy working for you.™

You might also like