Scribd Logo
Upload

Welcome to Scribd!

  • 65 views

    Procedure:: Updating Creo Schematics Designs

    Uploaded by

    Praveen Sreedharan
    This document provides a procedure for updating Creo Schematics designs in two tasks: 1. The first task modifies a wire routing diagram by relocating wires, adding and removing jogs, and moving labels. 2. The second task re-exports the updated diagram data from Creo Schematics to a new XML file.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Procedure:: Updating Creo Schematics Designs

    Uploaded by

    Praveen Sreedharan
    65 views6 pages
    This document provides a procedure for updating Creo Schematics designs in two tasks: 1. The first task modifies a wire routing diagram by relocating wires, adding and removing jogs, and moving labels. 2. The second task re-exports the updated diagram data from Creo Schematics to a new XML file.

    Original Description:

    logic_ref19

    Original Title

    LWR9

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a procedure for updating Creo Schematics designs in two tasks: 1. The first task modifies a wire routing diagram by relocating wires, adding and removing jogs, and moving labels. 2. The second task re-exports the updated diagram data from Creo Schematics to a new XML file.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    65 views6 pages

    Procedure:: Updating Creo Schematics Designs

    Uploaded by

    Praveen Sreedharan
    This document provides a procedure for updating Creo Schematics designs in two tasks: 1. The first task modifies a wire routing diagram by relocating wires, adding and removing jogs, and moving labels. 2. The second task re-exports the updated diagram data from Creo Schematics to a new XML file.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    Updating Creo Schematics Designs Page 1 of 6

    Procedure: Updating Creo Schematics Designs


    Before you begin Hide/Unhide

    Training Files:
    Download the training files using the button below, if you have not done so already.

    Download

    Procedure Setup:
    1. To avoid naming conflicts, it is recommended you save your work, click File > Close until no models
    display, then click File > Manage Session > Erase Not Displayed.

    2. Click File > Manage Session > Set Working Directory and navigate to the
    PTCU\CreoParametric2\Cabling\Schematics_Update folder and click OK

    3. Click File > Open and double-click WIRING.

    Task 1. Modify the wire routing diagram in Creo Schematics.

    1. Zoom in to the wires comprising harness_1.

    2. Double-click wire fiber W-3.

    3. Drag the fiber diamond symbol to relocate the W-3 wire to port 2.

    Figure 1

    4. Right-click and select Exit Tool.

    5. Double-click wire fiber W-2.

    6. Drag the fiber diamond symbol to relocate the W-2 wire to port 1.

    http://precisionlms.ecorp.cat.com/precisionlms/standard-content/coach_cp_6697620f-... 27-10-2017
    Updating Creo Schematics Designs Page 2 of 6

    Figure 2

    7. Right-click and select Exit Tool.

    8. Double-click wire fiber W-1.

    9. Drag the diamond symbol to add the jog.

    10. Double-click wire fiber W-2.

    11. Drag the diamond symbol to remove the jog.

    Figure 3

    12. Repeat this procedure to add a jog to wire W-4 and remove the jog from wire W-3.

    13. Right-click and select Exit Tool.

    14. Select label W-1, right-click, and select Move.

    15. Move the label to the position shown.

    16. Move the other three wire fiber labels.

    http://precisionlms.ecorp.cat.com/precisionlms/standard-content/coach_cp_6697620f-... 27-10-2017
    Updating Creo Schematics Designs Page 3 of 6

    Figure 4

    17. Right-click and select Deselect All.

    18. Select Route Fiber from the Route drop-down menu in the Insert group.

    19. Select the wires folder.


    ◾ Select STD_WIRE and click OK.

    20. Select port 1, and then port 2.

    http://precisionlms.ecorp.cat.com/precisionlms/standard-content/coach_cp_6697620f-... 27-10-2017
    Updating Creo Schematics Designs Page 4 of 6

    Figure 5

    21. Right-click and select Exit Tool.

    22. Select the new wire fiber, right-click, and select Properties.

    23. In the Fiber Properties dialog box, edit the Name Format to W-#, which is the convention in this
    sheet.
    ◾ Click Apply Dataset.

    24. In the Dataset Selector dialog box, select the 14_blk_sxl spool in row 14.
    ◾ Click OK.

    25. Click OK in the Fiber Properties dialog box.

    Figure 6

    26. Select wire fiber W-2, right-click, and select Properties.

    27. In the Fiber Properties dialog box, click Apply Dataset.


    ◾ In the Dataset Selector dialog box, click Next and select the 16_wht_sxl spool in row 24.

    ◾ Click OK, leaving the Fiber Properties dialog box open.

    http://precisionlms.ecorp.cat.com/precisionlms/standard-content/coach_cp_6697620f-... 27-10-2017
    Updating Creo Schematics Designs Page 5 of 6

    Figure 7

    28. Select wire fiber W-4.

    29. In the Fiber Properties dialog box, click Apply Dataset.


    ◾ Select the 16_wht_sxl spool in row 24.

    ◾ Click OK.

    ◾ Click OK in the Fiber Properties dialog box.

    30. Click File > Save Design from the main menu.

    Task 2. Re-export the diagram data from Creo Schematics.

    1. Click File > Export > XML from the main menu.

    2. In the Export to XML dialog box, click File Selector.

    3. In the Select export filename dialog box, browse to ..\Cabling\Schematics_Update.


    ◾ Type wiring_new.xml as the File Name.

    ◾ Click Open.

    Figure 8

    4. In the Export to XML dialog box, select Pro/CABLING as the Target application.
    ◾ Clear the Pre Wildfire 3.0 check box.

    ◾ Select the Current sheet option.

    ◾ If necessary, select the Duplicate Ref Des check box.

    ◾ Click OK.

    http://precisionlms.ecorp.cat.com/precisionlms/standard-content/coach_cp_6697620f-... 27-10-2017
    Updating Creo Schematics Designs Page 6 of 6

    Figure 9

    5. In the message window, notice the message that states the Export to XML is complete.

    This completes the procedure.

    http://precisionlms.ecorp.cat.com/precisionlms/standard-content/coach_cp_6697620f-... 27-10-2017

    You might also like