Scribd
Upload
56 views2 pages

Continuous, Multi-Function Oil Condition Sensing

This document provides information on the 4212 oil condition sensor with display, which continuously monitors 4 oil condition parameters and outputs the data via 4-20mA, 0-10V, or CAN signals. It can capture ferrous debris and has easy installation and low cost of ownership. The sensor is IP66/68/69K rated and operates from -40°C to +150°C.

Uploaded by

Joaquin Andres Boilet Huerta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
56 views2 pages

Continuous, Multi-Function Oil Condition Sensing

This document provides information on the 4212 oil condition sensor with display, which continuously monitors 4 oil condition parameters and outputs the data via 4-20mA, 0-10V, or CAN signals. It can capture ferrous debris and has easy installation and low cost of ownership. The sensor is IP66/68/69K rated and operates from -40°C to +150°C.

Uploaded by

Joaquin Andres Boilet Huerta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

4212 OIL CONDITION SENSOR WITH DISPLAY

Continuous, multi-function
oil condition sensing
4 oil condition measurement parameters
Captures and retains ferrous debris
Continuous real-time monitoring
Easy installation
Low cost of ownership
4-20mA, 0-10v & CAN outputs

ANALOGUE OUTPUT ELECTRICAL


Voltage 4-20mA Voltage 4-20mA CAN
Channel 1 (fine) 0.25 – 10V DC 4mA - 20mA Supply voltage 6 - 26V DC 9 - 26V DC 5 - 26V DC
(configurable) (configurable)
Over voltage
protection >32V DC
Channel 2 (coarse) 0.25 – 10V DC 4mA - 20mA
(configurable) (configurable)
Power consumption <2.9W <5.6W <2.8W
Channel 3 (oil/temp) 0.25 – 10V DC 4mA - 20mA
Reverse polarity
Switched (configurable) (configurable) to -32V DC
protection
Error indication <0.25 – 10V DC 1mA - 20mA
Analogue resolution 10 bit
(configurable) (configurable)
Report rate 10Hz 10Hz 1Hz
Sensor configuration Accessible via USB
DIGITAL OUTPUT
J1939 data length 8 bytes MECHANICAL
PGN 130816 Sensor size 57 x ø24.5mm
Byte 0 Coarse measurement percentage, no scaling Display Enclosure 105.5 x 105.5 x 66mm
Value 255 – optional output inhibited during calibration
Enclosure mounting 2 off M6 clearance holes
Byte 1 Fine measurement percentage, no scaling Materials (sensor) Aluminium alloy, FEP, PEI
Value 255 – optional output inhibited during calibration
Materials (enclosure) Aluminium alloy, st/steel, polyester
Byte 2 8 Status bits
Bit 0 - High/low temperature exceeded
Bit 1 - Oil upper threshold exceeded LIQUIDS
Bit 2 - Oil lower threshold exceeded Fuels Diesel, gasoline
Bit 3 - Fine measurement error
Bit 4 - Coarse measurement error Oils Hydraulic, gear, mineral, vegetable, synthetic ester,
Bit 5 - Oil measurement error semi-synthetic, polyalphaolefin, polyalkyleneglycol
Bit 6 - Internal temperature sensor error Coolants Ethylene glycol, Water
Bit 7 - External temperature sensor error
Other Salt water
Byte 3-7 Manufacturer use

ENVIRONMENTAL
Sensor protection IP66 / IP68 / IP69k
Enclosure protection IP65
ORDERING Differential pressure 10 Bar
Output: Mounting Thread Code: Sensor operating -40° to +150°C
045 = 4-20mA See table overleaf temperature
046 = 0-10V
047 = CAN Enclosure operating -40° to +85°C
USB cable = 1000-CO-116
temperature
USB stick = 1000-SW-001
4212 - PK - - Conduit kit = 4212-10-051-X Humidity 95% RH @ +55°C

More information at gillsc.com


E [email protected]
T +44 (0)1590 613900 Sensors & Controls
4212 OIL CONDITION SENSOR WITH DISPLAY

DIMENSIONS

MOUNTING THREADS
Outside Spanner Outside Spanner
Thread Code Thread Size Torque ±10% Thread Code Thread Size Torque ±10%
Dia A A/F Dia A/F
A M22 x 1.5 26.0 22.0 50 Nm N M42 x 2.0 67.0 60.0 100 Nm
B M24 x 2.0 26.0 22.0 50 Nm P 1 1/2” BSPP 67.0 60.0 100 Nm
C 3/4” x 16 UNF 26.0 22.0 50 Nm Q 1” BSPP 67.0 60.0 100 Nm
D 1/2” BSPP 26.0 22.0 50 Nm R 1 1/8” 12 UNF 67.0 60.0 100 Nm
E M20 x 1.5 26.0 22.0 50 Nm S 1 5/16” 12 UNF 67.0 60.0 100 Nm
F M25 x 1.5 32.0 22.0 50 Nm
G M26 x 1.5 32.0 22.0 50 Nm
H M27 x 2.0 32.0 22.0 50 Nm
J M30 x 1.5 32.0 22.0 50 Nm
K 3/4” BSPP 32.0 22.0 50 Nm
L 1” 14 UNF 32.0 22.0 50 Nm
M 1” 18 UNF 32.0 22.0 50 Nm

CONDUIT KIT

CONNECTIONS Male
CUSTOMER CONNECTIONS RECOMMENDED WIRE GAUGE adaptor
COARSE RANGE FOR TERMINAL BLOCK
FINE 14-26 AWG
LOCKING NUT
OIL/TEMP
GROUND
POWER
CAN L RECOMMENDED
CAN H CABLE DIAMETER
SHIELD
SENSOR MOUNTING

2-6MM Female
adaptor
SENSOR

SENSOR
CONNECTIONS LENGTH - X

EARTH BLACK
JUMPER ORANGE
WHITE
GREEN Conduit
LEDS BLUE tube
RED
USB SPARE
SHIELD

More information at gillsc.com


E [email protected] E & OE
T +44 (0)1590 613900 CD4212I-Iss 6 Sensors & Controls

You might also like