CLICK HERE TO

START

VARIABLE
SPRING SUPPORTS

Variable Catalog 2V
WARRANTY

PHS Industries Inc. (“PHS”) warrants to the original buyer (the “Buyer”) of products manufactured by it that all such
products will be free from defects in material and workmanship for a period of one (1) year after the date of ship-
ment when used in the manner and for the purpose recommended by PHS. PHS does not warrant goods manufac-
tured by other parties, except to the extent that such goods are covered by a warranty to PHS. Notice of a claim for a
breach of a warranty must be given to PHS within thirty (30) days after the date that the Buyer first has knowledge
of an alleged breach of warranty, but in no event later than one (1) year after the date of shipment. PHS’s obligations
under this Warranty are limited to its repair or replacement of those products that it determines, to its satisfaction, are
defective, and it shall not be liable for any charge or expense incurred by the Buyer in repairing or replacing said
products. Notwithstanding anything else contained herein to the contrary, PHS’s liability under this Warranty for
defective products is limited to the net sales price of such products. The foregoing constitutes the Buyer’s sole and
exclusive remedy for defective products.

In the event that PHS provides engineering design or fabrication services, the Buyer’s acceptance of PHS’s design
or delivery of the products shall relieve PHS of all further obligations with respect to such design and fabrication,
except to the extent that PHS may otherwise expressly provide in a product warranty. In no event, shall PHS be
responsible for design errors due to inaccurate or incomplete information provided by the Buyer or its representa-
tives. PHS reserves the right to revise product design without notification.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER
MATTER. IN NO EVENT AND UNDER NO CIRCUMSTANCE SHALL PHS BE LIABLE FOR (A) PERSON-
AL INJURY OR PROPERTY DAMAGES OR (B) CONSEQUENTIAL, SPECIAL OR INCIDENTAL DAM-
AGES, WHETHER FOR BREACH OF CONTRACT OR WARRANTY, NEGLIGENCE OR ANY OTHER TOR-
TIOUS ACT OR OMISSION. THIS WARRANTY SHALL NOT APPLY TO PRODUCTS THAT HAVE BEEN
SUBJECT TO ALTERATION OR REPAIR MADE BY A PARTY OTHER THAN PHS, ACCIDENT, ABUSE, OR
MISUSE. THIS WARRANTY SUPERCEDES ALL CONTRARY OBLIGATIONS IMPOSED ON PHS BY ANY
PURCHASE ORDER.

The terms of this Warranty may not be modified or changed except by a writing signed by an authorized officer
of PHS.
 VARIABLE SPRING SUPPORTS

Simply click on the subject to go to the appropriate page

W e take pleasure in presenting to the piping

industry the most versatile line of engineered
hangers and supports.
INDEX

Service and Specifications .......................2

PAGE

Design Features ........................................2

We enjoy a position of leadership based upon
Travel Series, Size and
years of experience in designing and manufacturing Type Selection.......................................2-3
quality pipe support devices. Our supports have Presets and Travel Stops ..........................3
been employed with outstanding success in the
Installation and Adjustment .....................3
chemical, processing and electric power industries.
Size and Series Selection
Our personnel are committed to respond quickly Procedure..................................................4
to customer requirements and service needs on Size and Series Selection Chart
both standard items and specialized applications. (Imperial - IPS) ........................................5
We are totally a service oriented company. Size and Series Selection Chart
We are staffed with engineers knowledgeable in (Metric - MKS) .....................................6-7

every phase of pipe support design and application. Nameplate and Cutaway Detail................8

We are equipped to evaluate support design on the Figure 291 ................................................8

basis of function, reliability and manufacturing econ- Manufacturers Conversion Table .............9
omy, and to suggest improved designs using either Series 910 Dimensions .....................10-16
standard or custom items for special requirements. Series 920 Dimensions .....................17-23
All products are manufactured under a scientific, Series 940 Dimensions .....................24-30
statistical quality control system which assures that Series 960 Dimensions .....................31-37
the finished product will conform to pre-determined Series 980 Dimensions .....................38-44
standards highest in the industry. It is your guarantee Technical Information.......................45-48
of consistent, uniform quality at all times.

1
VARIABLE SPRING SUPPORTS

INTRODUCTION purposes. The strength of the Travel Stop is designed so

The Variable Support is a spring loaded device used for the that it can withstand (up to) 2 times the normal load.
support of piping and equipment where normal vertical • Adjustable Travel Stop – allows the resetting of
movement is anticipated. Variable Supports are manufac- Preset/Travel Stop at any location within the normal
tured in five different Travel Series which allow up to ten operating range of the travel.
inches of movement and twenty-five different sizes allow- • Limit Stops – permanently installed to prevent the
ing up to 50,000 pounds of load. Seven different mounting movement of the pipe beyond a predetermined distance
Types allow the user the widest selection of configurations or load within the travel range of the spring.
to accommodate practically every hanger design. • Load Column Guide – for Type F units only, to prevent
tipping of the Load Flange due to anticipated eccentric
RECOMMENDED SERVICE loading.
• Extended Load Column – for Type F units only, the
Normally for support of piping systems where thermal length of the load column is furnished longer than nor-
changes cause the system dimensions and position to mal per customer request.
change, and where load transfer to equipment is not a prob- • Lifting Lugs – are available on larger sizes to facilitate
lem. Maximum recommended variation from the operating erection and installation.
load is 25%. A constant support should be used when • Hot-dip Galvanized Finish – available for protection
Variability exceeds 25%. Also used for support of equip- against weather and corrosive conditions. The unit is gal-
ment and ductwork to customer specifications. vanized to ASTM A-153 except the spring coil which is
epoxy powder coated to assure protection to the coil as it
SPECIFICATIONS flexes. The load column of the F Type spring is electro-
All spring units are designed to meet the requirements of: galvanized. Maximum ambient temperature for the epoxy
• ASME Code for Pressure Piping, ASME B31.1, B31.3 powdered coating is 350° F (177° C).
• Manufacturers Standardization Society (MSS), SP-58, • Epoxy Paint Finish – available for protection against
and SP-69 weather and corrosive conditions. The unit is painted
• Federal Specification A-A-1192-A with a two-part zinc rich epoxy paint except the spring
• British Standard BS3974 coil which is epoxy powder coated.
• Stainless Steel Construction – allows the greatest
STANDARD DESIGN FEATURES degree of corrosion protection. Constructed completely
• Precompression - precompressing the spring coil into the of stainless steel except the spring coil which can be
hanger casing saves headroom by reducing the size of the epoxy powder coated for economy.
casing, reduces the installed envelope size and also
weight and erection time. DETERMINING THE TRAVEL SERIES
• Spring casing protects the coil from damage and weather. In choosing the proper Variable Spring Travel Series it
• Steel Construction – spring, casing, and internal parts are must first be determined that the calculated movement will
fabricated of steel making them rugged and compact. All fall within the working range of the support and that the
welding is done to the strict requirements of ASME
variability of the unit does not induce unacceptable loads
Section IX.
on the other supports or connections. Five (5) standard
• The Piston Plate serves as a centering device and
Travel Series are available ranging from 11⁄4" through 10".
guide maintaining coil concentricity under normal
operating conditions.
• Load Indicators are visible in the slots and are SIZE AND SERIES SELECTION PROCEDURE
clearly readable. The size of the Variable Spring support selected depends
• Stainless steel nameplate and travel scale are upon the total piping load to be supported. Complete
corrosion resistant. sizing information is given on the SIZE and SERIES
• All spring hangers are calibrated for accurate SELECTION PROCEDURE shown in this catalog.
loading conditions.
• The unit is preset at the factory to the Cold Load DETERMINING THE TYPE
upon request.
• For each series there is a reserve travel at the upper The type of Variable Spring support to be selected depends
and lower limits of the working range of the spring. upon the physical characteristics of the structure to which
• Allowable spring coil stresses conform to MSS-SP-58. the hanger assembly will be attached. Consideration must
• Standard finish is a quality rust resisting primer paint. be given to available headroom, whether the piping will be
• A turnbuckle or other suitable coupling is utilized supported from above or below the hanger, interferences,
for adjustment of rod type spring units. F type springs etc. There are seven (7) standard types available for each
utilize an adjustable load column. Travel Series; they are:
• All F type units are supplied with a load flange. • Type A – Is attached to the supporting member by a verti-
cal rod threaded into the top of the case.
OPTIONAL DESIGN FEATURES • Type B – For use where headroom is limited. The unit has a
• Travel Stop – set at the Cold load position changes the single lug for attachment to the structure to permit connect-
spring into a rigid support for hydrostatic testing or other ing with a bolt or pin to a clevis or welded beam attachment.

2
 VARIABLE SPRING SUPPORTS

• Type C – Also designed for limited headroom applica- down limit stops, if applicable. To remove the Load
tions. The unit has two lugs welded to the top of the cas- Presets, the spring load must be increased slightly by use of
ing to permit connecting with a bolt or pin through a sin- the adjustment means provided. After the Load Presets or
gle lug attachment to the structure. Travel Stops have been removed, readjust the spring unit
• Type D – Designed for use where the variable spring is back to the exact Cold Load setting.
positioned above the supporting structure and spring Prior to startup, be sure all of the spring units have had
adjustment is made from the top. their Load Presets or Travel Stops removed, and have been
• Type E – Also designed for use where the variable spring adjusted to their Cold Load setting.
is positioned above the supporting structure, but where
After startup and when the piping system has stabilized
the spring adjustment must be below the structure on
thermally, the Load Indicator on the unit should be at the
which the case is supported.
Hot Load (Operating) setting. If it is not, the spring should
• Type F – Designed to support piping from below. Used
be adjusted to the Hot Load setting. No further adjustment
to support pipe from the floor or where support from
should be needed.
overhead is not practical.
• Type G – For use where headroom is limited or an obstruc-
tion prohibits the use of a single rod type Variable Spring. ORDERING INSTRUCTIONS:
When ordering a Variable Spring Support please specify for
LOAD PRESET BAR AND TRAVEL STOP each unit:
The Load Preset Bars are installed at the factory at the Cold 1. Travel Series: 910, 920, 940, 960, or 980
Load setting of the unit. 2. Spring Type: A, B, C, D, E, F or G
The Travel Stops, which are optional and will be provided 3. Spring Size: 0 through 22 for all Travel Series; 000 and
only if ordered, include both the Load Preset Bars to pre- 00 available for Travel Series 920 only
set the unit at the Cold Load setting and more importantly a
down limit stop which locks the unit at that position. 4. Movement and Direction of movement from the Cold
(Installed) position to the Hot (Operating) position.
This locking effect results in the unit functioning as a rigid
hanger during erection, hydrostatic testing, chemical clean- 5. Hot Load (Operating position).
ing or other condition which may cause the unit to exceed 6. Cold Load (Installed position).
its load rating. The Travel Stops are designed for twice the 7. Rod Spacing: For Type G only, specify center to center
maximum working load of the unit and are installed at the rod dimension
factory with a “Caution” tag which calls attention to the 8. Customer hanger identification or Mark Number (if any).
fact that they must be removed before system startup.
9. Finish: Primer Painted, Galvanized, Epoxy Painted,
Stainless Steel, or Special Customer Requirements.
INSTALLATION AND ADJUSTMENT 10. Type B and C units do not come with connection pins to
In following these installation instructions note that the the structure. If required, please order as a Figure 291
adjustment is accomplished by rotating the turnbuckle, rod and specify pin size and finish.
coupling or load column provided with the spring unit. 11. Specify if unit requires Travel Stops, Lifting Lugs,
Firmly secure the spring unit to the structure. Attach the Limit Stop Load Column Guide, Adjustable Travel
appropriate rod and/or pipe attachment. Cut the banding Stops or any other special feature desired.
holding the Load Presets or Travel Stops. Remove the

TYPICAL APPLICATIONS OF VARIABLE SPRING SUPPORTS

EXISTING STEEL

TYPE A TYPE B TYPE C TYPE D TYPE E TYPE F TYPE G

3
VARIABLE SPRING SUPPORTS

SIZE AND SERIES SELECTION PROCEDURE EXAMPLE:

Select a Variable Spring for the following conditions:
The key criteria in selecting the size and series of a Variable Hot Load = 307 lbs. or 1366 N or 139 Kg
Spring support is a factor known as Variability. This is a cal- Movement = 1⁄2" up or 13 mm or 13 mm
culation of the percentage change in the supporting force of Variability = 20% Maximum 20% max. 20% max.
a variable spring between the Hot (Operating Condition) and
the Cold (Installed Condition). The formula is shown below. SOLUTION:
For practical purposes this percentage relates to the amount
1. Calculate Spring Rate.
of load the spring transfers back into the piping system prior
to operation. The lower the Variability the lower the effect 0.20 x 307 lbs. = 122.8 lbs. per inch, or
on the system while in the Cold position. Since the Hot Load 0.50 inches
is the actual Operating Load of the piping, loading due to
Variability is not a factor. 0.20 x 1366 N = 21 N/mm, or
The Spring Rate is the amount of load required to deflect a 13mm
spring coil over a given distance and is expressed in pounds
0.20 x 139 Kg = 2.14 Kg/mm
per inch (Newtons per millimeter).
13mm
The Movement is the amount the piping system changes due
to thermal growth when moving from the Cold to Hot position. 2. Find the Spring Size column on the SIZE AND SERIES
SELECTION CHART where the Hot Load is 307 lbs.,
Variability = Movement x Spring Rate or 1366 N or 139 Kg.
Hot Load
(A Size 5, Series 920 fits the criteria).
% Variability = Variability x 100
3. Calculate the Cold Load.

The Cold Load is calculated by adding (for UP movement) 63 lbs. per inch x 0.50 inches = 32 lbs., or
or subtracting (for DOWN movement) the product of Spring
Rate times the Movement to or from the Hot Load. 11 N per mm x 13 mm = 143 N, or
If an allowable Variability is not specified, good practice 1.12 Kg per mm x 13 mm = 15 Kg
would be to use 25% as specified by MSS-SP-58.
Since the Movement is UP, add the above load change to
TO SELECT THE PROPER SIZE AND SERIES the Hot Load.

1. Find the Hot Load in one of Spring Size columns on the 307 lbs. + 32 lbs. = 339 lbs. Cold Load, or
appropriate SIZE AND SERIES SELECTION CHART
found on page 5, 6, or 7. 1366 N + 143 N = 1509 N Cold Load, or
2. Calculate the maximum allowable Spring Rate from the 139 Kg + 15 Kg = 154 Kg Cold Load
formula:
Spring Rate = Variability x Hot Load 4. Now check to see if the Hot Load and Cold Load fit in
Movement the Working Range of a Size 5 Series 920. If so, you
have selected the proper unit.
3. Stay in the column and choose the Travel Series with a If you are unable to find the proper size and series of
Spring Rate equal to or less than the value calculated. your application, please call us.
4. Calculate the Cold Load and check that both the Hot
Load and Cold Load fall within the Working Range of the
Travel Series selected.
5. If your requirements are not met, move to an adjacent
Spring Size column and recalculate again using the above
procedure.
If the Movement or loading requirements cannot be satis-
fied, select a Travel Series with a greater Working Range
and recalculate.
If any combination of Load, Movement and/or Variability
cannot achieve the desired results the use of a Constant
Support should be considered.

4
 SIZE AND SELECTION CHART
LOAD TABLE IN POUNDS
Working Range Spring Deflection
Inches SPRING SIZE Inches
980 960 940 920 910 000* 00* 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 910 920 940 960 980
7 19 45 63 81 105 141 189 252 336 450 600 780 1020 1350 1800 2400 3240 4500 6000 7980 10620 14100 18750 25005 0 0 0 0 0
7 20 47 66 84 109 147 197 263 350 469 625 813 1063 1406 1875 2500 3375 4688 6250 8313 11063 14688 19531 26047
8 22 49 68 88 114 153 205 273 364 488 650 845 1105 1463 1950 2600 3510 4875 6500 8645 11506 15275 20313 27089
9 24 51 71 91 118 159 213 284 378 506 675 878 1148 1519 2025 2700 3645 5063 6750 8978 11948 15863 21094 28131
0 0 0 0 0 10 26 53 74 95 123 165 221 294 392 525 700 910 1190 1575 2100 2800 3780 5250 7000 9310 12390 16450 21875 29173 1⁄ 4 1⁄ 2 1 11⁄2 2
11 28 54 76 98 127 170 228 305 406 544 725 943 1223 1631 2175 2900 3915 5438 7250 9643 12833 17038 22656 30214
12 30 56 79 101 131 176 236 315 420 563 750 975 1275 1688 2250 3000 4050 5625 7500 9975 13275 17625 23438 31256
12 31 58 81 105 136 182 244 326 434 581 775 1008 1318 1744 2325 3100 4185 5813 7750 10308 13718 18213 24219 32298
2 11⁄2 1 1⁄ 2 1⁄ 4 14 34 60 84 108 140 188 252 336 448 600 800 1040 1360 1800 2400 3200 4320 6000 8000 10640 14160 18800 25000 33340 1⁄ 2 1 2 3 4
14 35 62 87 111 144 194 260 347 462 619 825 1073 1403 1856 2475 3300 4455 6188 8250 10973 14603 19388 25781 34382
15 38 64 89 115 149 200 268 357 476 638 850 1105 1445 1913 2550 3400 4590 6375 8500 11305 15045 19975 26563 35424
16 40 66 92 118 153 206 276 368 490 656 875 1138 1488 1969 2625 3500 4725 6563 8750 11638 15488 20563 27344 36466
4 3 2 1 1⁄ 2 17 41 68 95 122 158 212 284 378 504 675 900 1170 1530 2025 2700 3600 4860 6750 9000 11970 15930 21150 28125 37508 3⁄ 4 11⁄2 3 41⁄2 6
18 43 69 97 125 162 217 291 389 518 694 925 1203 1573 2081 2775 3700 4995 6938 9250 12303 16373 21738 28906 38549
19 45 71 100 128 166 233 299 399 532 713 950 1235 1615 2138 2850 3800 5130 7125 9500 12635 16815 22325 29688 39591
20 47 73 102 132 171 229 307 410 546 731 975 1268 1658 2194 2925 3900 5265 7313 9750 12968 17258 22913 30469 40633
6 41⁄2 3 11⁄2 3⁄ 4 21 49 75 105 135 175 235 315 420 560 750 1000 1300 1700 2250 3000 4000 5400 7500 10000 13300 17700 23500 31250 41675 1 2 4 6 8
21 50 77 108 138 179 241 323 431 574 769 1025 1333 1743 2306 3075 4100 5335 7688 10250 13633 18143 24088 32031 42717
22 53 79 110 142 184 247 331 441 588 788 1050 1365 1785 2363 3150 4200 5670 7875 10500 13965 18585 24675 32813 43759
23 55 81 113 145 188 253 339 452 602 806 1075 1398 1828 2419 3225 4300 5805 8063 10750 14298 19028 25263 33594 44801
8 6 4 2 1 24 56 83 116 149 193 259 347 462 616 825 1100 1430 1870 2475 3300 4400 5940 8250 11000 14630 19470 25850 34375 45843 11⁄4 21⁄2 5 71⁄2 10
25 58 84 118 152 197 264 354 473 630 844 1125 1463 1913 2531 3375 4500 6075 8438 11250 14963 19913 26438 35156 46884
26 60 86 121 155 201 270 362 483 644 863 1150 1496 1955 2588 3450 4600 6210 8625 11500 15295 20355 27025 35938 47926

VARIABLE SPRING SUPPORTS

27 62 88 123 159 206 276 370 494 658 881 1175 1528 1998 2644 3525 4700 6345 8813 11750 15628 20798 27613 36719 48968
10 71⁄2 5 21⁄2 11⁄4 28 64 90 126 162 210 282 378 504 672 900 1200 1560 2040 2700 3600 4800 6480 9000 12000 15960 21240 28200 37500 50010 11⁄2 3 6 9 12
28 66 92 129 165 214 288 386 515 686 919 1225 1593 2083 2756 3675 4900 6615 9188 12250 16293 21863 28788 38281 51052
29 68 94 131 169 219 294 394 525 700 938 1250 1625 2125 2813 3750 5000 6750 9375 12500 16625 22125 29375 39063 52094
30 70 96 134 172 223 300 402 536 714 956 1275 1658 2168 2869 3825 5100 6885 9563 12750 16958 22568 29963 39844 53136
31 72 98 137 176 228 306 410 546 728 975 1300 1690 2210 2925 3900 5200 7020 9750 13000 17290 23010 30550 40625 54178 13⁄4 31⁄2 7 101⁄2 14
000 00 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
SPRING SIZE
SPRING RATE - Pounds/Inch
910 30 42 54 70 94 126 168 224 300 400 520 680 900 1200 1600 2160 3000 4000 5320 7080 9400 12500 16670 910
920 7 15 15 21 27 35 47 63 84 112 150 200 260 340 450 600 800 1080 1500 2000 2660 3540 4700 6250 8335 920
940 7 10 13 17 23 31 42 56 75 100 130 170 225 300 400 540 750 1000 1330 1770 2350 3125 4168 940
960 5 7 9 12 16 21 28 37 50 67 87 113 150 200 267 360 500 667 887 1180 1567 2083 2778 960
980 4 5 7 9 12 16 21 28 38 50 65 85 113 150 200 270 375 500 665 885 1175 1563 2084 980
5
6

VARIABLE SPRING SUPPORTS

SIZE AND SELECTION CHART

Working Range
LOAD TABLE IN NEWTONS Spring Deflection
Millimeters SPRING SIZE Millimeters
980 960 940 920 910 000* 00* 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 910 920 940 960 980
31 85 200 280 360 467 627 841 1121 1495 2002 2669 3469 4537 6005 8006 10675 14412 20016 26688 35495 47238 62717 83400 111222 0 0 0 0 0
31 89 209 294 374 485 654 876 1170 1557 2086 2780 3616 4728 6254 8340 11120 15012 20852 27800 36976 49208 65332 86874 115857
36 98 218 302 391 507 681 912 1214 1619 2171 2891 3759 4915 6507 8674 11565 15612 21684 28912 38453 51179 67943 90352 120492
40 107 227 316 405 525 707 947 1263 1681 2251 3002 3905 5106 6757 9007 12010 16213 22520 30024 39934 53145 70559 93826 125127
0 0 0 0 0 44 116 236 329 423 547 734 983 1308 1744 2335 3114 4048 5293 7006 9341 12454 16813 23352 31136 41411 55111 73170 97300 129762 6 13 25 38 50
49 125 240 338 436 565 756 1014 1357 1806 2420 3225 4194 5440 7255 9674 12899 17414 24188 32248 42892 57081 75785 100774 134392
53 133 249 351 449 583 783 1050 1401 1868 2504 3336 4337 5671 7508 10008 13344 18014 25020 33360 44369 59047 78396 104252 139027
53 138 258 360 467 605 810 1085 1450 1930 2584 3447 4484 5862 7757 10342 13789 18615 25856 34472 45850 61018 81011 107726 143662
50 38 25 13 6 62 151 267 374 480 623 836 1121 1495 1993 2669 3558 4626 6049 8006 10675 14234 19215 26688 35584 47327 62984 83622 111200 148296 13 25 51 76 102
62 156 276 387 494 641 863 1156 1543 2055 2753 3670 4773 6241 8255 11009 14678 19816 27524 36696 48808 64954 86238 114674 152931
67 169 285 396 512 663 890 1192 1588 2117 2838 3781 4915 6427 8509 11342 15123 20416 28356 37808 50285 66920 88849 118152 157566
71 178 294 409 525 681 916 1228 1637 2180 2918 3892 5062 6619 8758 11676 15568 21017 29192 38920 51766 68891 91464 121626 162201
102 76 51 25 13 76 182 302 423 543 703 943 1263 1681 2242 3002 4003 5204 6805 9007 12010 16013 21617 30024 40032 53243 70857 94075 125100 166836 19 38 76 114 152
80 191 307 431 556 721 965 1294 1730 2304 3087 4114 5351 6997 9256 12343 16458 22218 30860 41144 54724 72827 96691 128574 171466
85 200 316 445 569 738 1036 1330 1775 2366 3171 4226 5493 7184 9510 12677 16902 22818 31692 42256 56200 74793 99302 132052 176101
89 209 325 454 587 761 1019 1366 1824 2429 3251 4337 5640 7375 9759 13010 17347 23419 32528 43368 57682 76764 101917 135526 180736
152 114 76 38 19 93 218 334 467 600 778 1045 1401 1868 2491 3336 4448 5782 7562 10008 13344 17792 24019 33360 44480 59158 78730 104528 139000 185370 25 51 102 152 203
93 222 342 480 614 796 1072 1437 1917 2553 3421 4559 5929 7753 10257 13678 18237 23730 34196 45592 60640 80700 107143 142474 190005
98 236 351 489 632 818 1099 1472 1962 2615 3505 4670 6072 7940 10511 14011 18682 25220 35028 46704 62116 82666 109754 145952 194640
102 245 360 503 645 836 1125 1508 2010 2678 3585 4782 6218 8131 10760 14345 19126 25821 35864 47816 63598 84637 112370 149426 199275
203 152 102 51 25 107 249 369 516 663 858 1152 1543 2055 2740 3670 4893 6361 8318 11009 14678 19571 26421 36696 48928 65074 86603 114981 152900 203910 32 64 127 191 254
111 258 374 525 676 876 1174 1575 2104 2802 3754 5004 6507 8509 11258 15012 20016 27022 37532 50040 66555 88573 117596 156374 208540
116 267 383 538 689 894 1201 1610 2148 2865 3839 5115 6654 8696 11511 15346 20461 27622 38364 51152 68032 90539 120207 159852 213175
120 276 391 547 707 916 1228 1646 2197 2927 3919 5226 6797 8887 11761 15679 20906 28223 39200 52264 69513 92510 122823 163326 217810
254 191 127 64 32 125 285 400 560 721 934 1254 1681 2242 2989 4003 5338 6939 9074 12010 16013 21350 28823 40032 53376 70990 94476 125434 166800 222444 38 76 152 229 305
125 294 409 574 734 952 1281 1717 2291 3051 4088 5449 7086 9265 12259 16346 21795 29424 40868 54488 72471 97247 128049 170274 227079
129 302 418 583 752 974 1308 1753 2335 3114 4172 5560 7228 9452 12512 16680 22240 30024 41700 55600 73948 98412 130660 173752 231714
133 311 427 596 765 992 1334 1788 2384 3176 4252 5671 7375 9643 12761 17014 22685 30624 42536 56712 75429 100382 133275 177226 236349
138 320 436 609 783 1014 1361 1824 2429 3238 4337 5782 7517 9830 13010 17347 23130 31225 43368 57824 76906 102348 135886 180700 240984 44 89 178 267 356
000 00 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
SPRING SIZE
SPRING RATE - N/mm
910 5.3 7.4 9.5 12.3 16.5 22.1 29.4 39.2 52.5 70.0 91.1 119 158 210 280 378 525 700 932 1240 1646 2189 2919 910
920 1.2 2.6 2.6 3.7 4.7 6.1 8.2 11.0 14.7 19.6 26.3 35.0 45.5 59.5 78.8 105 140 189 263 350 466 620 823 1094 1459 920
940 1.3 1.8 2.4 3.1 4.1 5.5 7.4 9.8 13.1 17.5 22.8 29.8 39.4 52.5 70.0 94.6 131 175 233 310 411 547 730 940
960 0.9 1.2 1.6 2.0 2.8 3.7 4.9 6.5 8.8 11.7 15.2 19.8 26.3 35.0 46.8 63.0 87.6 117 155 207 274 365 486 960
980 0.7 0.9 1.2 1.6 2.1 2.8 3.7 4.9 6.7 8.8 11.4 14.9 19.8 26.3 35.0 47.3 65.7 87.6 116 155 206 274 365 980
 SIZE AND SELECTION CHART

Working Range
LOAD TABLE IN KILOGRAMS Spring Deflection
Millimeters SPRING SIZE Millimeters
980 960 940 920 910 000* 00* 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 910 920 940 960 980
3 9 20 29 37 48 64 86 114 152 204 272 354 463 612 816 1088 1469 2041 2721 3619 4816 6395 8503 11340 0 0 0 0 0
3 9 21 30 38 50 67 89 119 159 213 283 368 482 638 850 1134 1531 2126 2834 3766 5017 6661 8858 11813
4 10 22 31 40 52 69 93 124 165 221 295 383 501 663 884 1179 1592 2211 2948 3914 5218 6927 9212 12285
4 11 23 32 41 54 72 96 129 171 230 306 398 520 689 918 1224 1653 2296 3061 4061 5418 7194 9566 12758
0 0 0 0 0 5 12 24 33 43 56 74 100 133 178 238 317 413 540 714 952 1270 1714 2381 3175 4209 5619 7460 9921 13230 6 13 25 38 50
5 13 25 35 44 57 77 104 138 184 247 329 427 559 740 986 1315 1776 2466 3288 4356 5820 7727 10275 13703
5 14 26 36 46 59 80 107 143 190 255 340 442 578 765 1020 1360 1837 2551 3401 4503 6020 7993 10629 14175
5 14 26 37 47 61 82 111 148 197 264 351 457 597 791 1054 1406 1898 2636 3515 4651 6221 8260 10984 14648
50 38 25 13 6 6 15 27 38 49 63 85 114 152 203 272 363 472 617 816 1088 1451 1959 2721 3628 4798 6422 8526 11338 15120 13 25 51 76 102
6 16 28 39 51 65 88 118 157 209 281 374 486 636 842 1122 1496 2020 2806 3741 4945 6622 8792 11692 15593
7 17 29 40 52 67 90 121 162 216 289 385 501 655 867 1156 1542 2082 2891 3855 5093 6823 9059 12046 16065
7 18 30 42 54 69 93 125 167 222 298 397 516 675 893 1190 1587 2143 2976 3968 5240 7024 9325 12401 16538
102 76 51 25 13 8 19 31 43 55 71 95 129 171 229 306 408 530 694 918 1224 1633 2204 3061 4081 5388 7224 9592 12755 17010 19 38 76 114 152
8 20 31 44 57 73 98 132 176 235 315 419 545 713 944 1259 1678 2265 3146 4195 5535 7425 9858 13109 17483
9 20 32 45 58 75 101 136 181 241 323 431 560 732 969 1293 1723 2327 3231 4308 5682 7626 10125 13464 17955
9 21 33 46 60 77 103 139 186 248 332 442 575 752 995 1327 1769 2388 3316 4422 5830 7827 10391 13818 18428
152 114 76 38 19 10 22 34 48 61 79 106 143 190 254 340 453 589 771 1020 1361 1814 2449 3401 4535 5977 8027 10657 14172 18900 25 51 102 152 203
10 23 35 49 63 81 108 146 195 260 349 465 604 790 1046 1395 1859 2510 3486 4648 6125 8228 10924 14527 19373
10 24 36 50 64 83 111 150 200 267 357 476 619 809 1071 1429 1905 2571 3571 4762 6272 8429 11190 14881 19845
10 25 37 51 66 85 114 154 205 273 366 487 634 829 1097 1463 1950 2633 3656 4875 6419 8629 11457 15235 20318
203 152 102 51 25 11 25 37 52 67 87 116 157 210 279 374 499 648 848 1122 1497 1995 2694 3741 4988 6567 8830 11723 15589 20790 32 64 127.0 191 254
11 26 38 54 69 89 119 161 214 286 383 510 663 867 1148 1531 2041 2755 3827 5102 6714 9031 11990 15944 21263
12 27 39 55 70 91 122 164 219 292 391 521 678 886 1173 1565 2086 2816 3912 5215 6861 9231 12256 16298 21735

VARIABLE SPRING SUPPORTS

12 28 40 56 72 93 124 168 224 298 400 533 692 906 1199 1599 2131 2878 3997 5329 7009 9432 12522 16652 22208
254 191 127 64 32 13 29 41 57 73 95 127 171 229 305 408 544 707 925 1224 1633 2177 2939 4082 5442 7156 9633 12789 17007 22680 38 76 152 229 305
13 30 42 58 75 97 129 175 233 311 417 555 722 944 1250 1667 2222 3000 4167 5555 7304 9833 13055 17361 23153
13 31 43 60 77 99 132 179 238 317 425 567 737 964 1276 1701 2267 3061 4252 5669 7451 10034 13322 17715 23625
14 32 43 61 78 101 135 182 243 324 434 578 751 983 1301 1735 2313 3122 4337 5782 7598 10235 13588 18070 24098
14 33 44 62 80 103 137 186 248 330 442 589 766 1002 1327 1769 2358 3184 4422 5895 7746 10435 13855 18424 24570 44 89 178 267 356
000 00 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
SPRING SIZE
SPRING RATE - Kg/mm
910 0.54 0.75 0.96 1.41 1.68 2.25 3.00 4.00 5.36 7.14 9.28 12.14 16.07 21.43 28.57 38.57 53.56 71.42 94.99 126.41 167.84 223.19 297.64 910
920 0.13 0.27 0.27 0.37 0.48 0.62 0.84 1.12 1.50 2.00 2.68 3.57 4.64 6.07 8.03 10.71 14.28 19.28 26.78 35.71 47.49 63.21 83.92 111.59 148.82 920
940 0.13 0.19 0.24 0.31 0.42 0.56 0.75 1.00 1.34 1.79 2.32 3.04 4.02 5.36 7.14 9.64 13.39 17.85 23.75 31.60 41.96 55.80 74.41 940
960 0.09 0.12 0.16 0.21 0.27 0.37 0.50 0.67 0.89 1.19 1.55 2.02 2.68 3.57 4.76 6.43 8.93 11.90 15.84 21.07 27.97 37.20 49.61 960
980 0.07 0.09 0.13 0.16 0.21 0.29 0.38 0.50 0.68 0.89 1.16 1.52 2.02 2.68 3.57 4.82 6.70 8.93 11.88 15.80 20.98 27.90 37.22 980
7
VARIABLE SPRING SUPPORTS

TYPICAL NAMEPLATE DESIGNS VARIABLE SPRING CUTAWAY DETAIL

IN. LBS.
0
FIG. NO. SIZE TYPE
1/4 IN.
0
LBS.

CALIBRATED LOAD TRAVEL

1/2 1/2

3/4 1

MARK NUMBER SERIAL NUMBER 1 1 1/2

2
1 1/4
2 1/2
S.R. LBS./IN.

TYPE SIZE

S.R. HOT COLD

MK.#

TYPE SIZE SERIAL

NUMBER

FIGURE NO. 920

HOT COLD

MK.#

SERIAL
NUMBER

FIGURE NO. 910

CLEVIS PIN WITH COTTERS TYPE C PIN SELECTION TABLE

Figure 291 PIN MAX.
The Figure 291 is used with Type C Variable Springs to SPRING DIA. RECOM.
SIZE D E H L W LOAD
secure the spring to the structural connection. 000 TO 5 5⁄ 8 3⁄ 8 3⁄ 16 3 21⁄4 1130
Material: Carbon Steel 000 TO 5 16 10 5 76 57 5027
6 TO 8 3⁄ 4 3⁄ 8 3⁄ 16 3 21⁄4 1810
Finish: Plain, Hot-dip galvanized 6 TO 8 19 10 5 76 57 8052
Ordering: Specify pin diameter, figure number, and finish. 9 TO 11 7⁄ 8 3⁄ 8 1⁄ 4 4 31⁄4 2710
9 TO 11 22 10 6 102 83 12055
For Metric applications Specify Figure M291. 12 AND 13 11⁄8 3⁄ 8 1⁄ 4 5 41⁄4 4960
12 AND 13 29 10 6 127 108 22064
14 AND 15 13⁄8 1⁄ 2 5⁄ 16 51 ⁄ 2 41 ⁄ 2 8000
14 AND 15 35 13 8 140 114 35587
L D 16 15⁄8 1⁄ 2 5⁄ 16 6 5 11630
16 41 13 8 152 127 51735
E W E 17 17⁄8 5⁄ 8 7⁄ 16 7 53⁄4 15700
17 48 16 11 178 146 69840
18 21⁄4 5⁄ 8 7⁄ 16 71 ⁄ 4 6 20700
18 57 16 11 184 152 92082
19 21⁄2 5⁄ 8 7⁄ 16 8 63⁄4 27200
19 64 16 11 203 171 120996
20 23⁄4 5⁄ 8 7⁄ 16 8 63⁄4 33500
20 70 16 11 203 171 149021
H 21 3 3⁄ 4 7⁄ 16 81 ⁄ 4 63 ⁄ 4 41580
21 76 19 11 210 171 184964
22 31⁄4 3⁄ 4 7⁄ 16 81 ⁄ 2 7 50580
22 83 19 11 216 178 225000

8
 VARIABLE SPRING SUPPORTS

COMPARATIVE SCALED DIFFERENCES

Figure 910

Figure 920

LOAD PRESET BAR AND TRAVEL STOP Figure 940

Load Preset Bar

Position Banding
Indicator
Line
Piston Plate Figure 960

Travel Stop

Figure 980

MANUFACTURERS CONVERSION TABLE

ANVIL BASIC BERGEN- BERGEN- CARPENTER & CARPENTER &
INTERNATIONAL ENGINEERS PATERSON POWER BINDER PATERSON PATERSON LTD.
82 401 VS1 or 3100 910 BV35 482 DV35
B-268 402 VS2 or 3200 920 BV70 468 DV70
98 403 VS4 or 3400 940 BV140 498 DV140
Triple 400 VS6 or 3600 960 DV210
Quad VS8 980

COMET/PSL CENTRAL FEE & MASON FRONEK GRINNELL LEIBFRIED NPS

V1 FSC-1 410 15 82 S VS
V2 FSC-2 420 30 B-268 R VM
V3 FSC-4 430 60 98 D VL
FSC-6 90 Triple
Quad

POWER PHS PIPING SHAW-

PIPING INDUSTRIES TECHNOLOGIES PSC FRONEK
500 910 PTP-1 910 12
600 920 PTP-2 920 25
700 940 PTP-4 960 50
800 960 PTP-6 980 75

9
VARIABLE SPRING SUPPORTS

SERIES 910 - TYPE A

MIN.
ROD CASE CASE ROD THD. ROD APPROX.
SIZE LGTH DIA. T’OUT ENGM'T ENGM'T WGT
SIZE A B C E F G EACH
0 1⁄ 2 61 ⁄ 8 4 75⁄8 7⁄ 8 7⁄ 8 7
0 M12 156 102 194 22 22 3.2
1 1⁄ 2 63 ⁄ 8 4 8 7⁄ 8 7⁄ 8 8
G A 1 M12 162 102 203 22 22 3.6
2 1⁄ 2 7 4 75⁄8 7⁄ 8 7⁄ 8 9
2 M12 178 102 194 22 22 4.1
3 1⁄ 2 73 ⁄ 8 5 ⁄16
9 83 ⁄ 8 7⁄ 8 7⁄ 8 12
3 M12 187 141 213 22 22 5.4
4 1⁄ 2 73 ⁄ 8 59⁄16 77 ⁄ 8 7⁄ 8 7⁄ 8 13
4 M12 187 141 200 22 22 5.9
5 1⁄ 2 73 ⁄ 8 59⁄16 75 ⁄ 8 7⁄ 8 7⁄ 8 14
5 M12 187 141 194 22 22 6.4
E B 6 5⁄ 8 81 ⁄ 2 65⁄8 9 11⁄8 1 20
6 M16 216 168 229 29 25 9.1
7 5⁄ 8 81 ⁄ 2 65⁄8 83 ⁄ 8 1 ⁄8
1 1 20
7 M16 216 168 213 29 25 9.1
8 5⁄ 8 81 ⁄ 2 65⁄8 81 ⁄ 8 11⁄8 1 22
8 M16 216 168 206 29 25 10
9 3⁄ 4 10 85⁄8 101⁄4 1 ⁄4
1 1 ⁄8
3 40
9 M20 254 219 260 32 35 18.1
10 3⁄ 4 10 85⁄8 101⁄4 11⁄4 13 ⁄ 8 43
10 M20 254 219 260 32 35 19.5
11 3⁄ 4 10 85⁄8 11 1 ⁄4
1 1 ⁄8
3 50
F C 11 M20 254 219 279 32 35 22.7
12 1 111⁄4 85⁄8 107⁄8 15⁄8 15 ⁄ 8 57
12 M24 286 219 276 41 41 25.9
13 1 111⁄4 85⁄8 10 1⁄2 1 ⁄8
5 1 ⁄8
5 64
13 M24 286 219 267 41 41 29
14 11⁄4 12 85⁄8 113⁄8 13⁄4 2 68
14 M30 305 219 289 44 51 30.8
15 11⁄4 12 85⁄8 113⁄8 13⁄4 2 88
15 M30 305 219 289 44 51 39.9
16 11⁄2 131⁄2 85⁄8 127⁄8 2 21 ⁄ 8 106
16 M36 343 219 327 51 54 48.1
17 13⁄4 151⁄8 85⁄8 141⁄4 2 ⁄8
5 2 ⁄8
3 143
17 M42 384 219 362 67 60 64.9
18 2 165⁄8 123⁄4 16 27⁄8 25 ⁄ 8 251
18 M48 422 324 406 73 67 113.9
19 21⁄4 181⁄4 123⁄4 173⁄8 3 ⁄2
1 2 ⁄8
5 284
19 M56 464 324 441 89 67 128.8
20 21⁄2 215⁄8 123⁄4 203⁄8 37⁄8 31 ⁄ 8 387
20 M64 549 324 518 98 79 175.5
21 23⁄4 23 123⁄4 213⁄4 4 ⁄4
1 4 ⁄8
1 430
21 M72 584 324 552 108 105 195
22 3 271⁄2 123⁄4 263⁄4 41⁄4 41 ⁄ 8 577
22 M80x6 699 324 679 108 105 261.7

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot

Load, Cold Load, Movement and Direction of Movement (from the
Cold/Installed position to the Hot/Operating position), and Hanger
Identification Number (if any). Specify any other optional feature(s)
as necessary.
For corrosion resistant units specify the Figure Number with the letter
prefix “C”, e.g. C910
For metric units specify the Figure Number with the letter prefix “M”
e.g. M910 or MC910.

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

10
 VARIABLE SPRING SUPPORTS

FIGURE 910 TYPE B

MIN. HGT.
ROD CASE CASE ROD THD. OF LUG APPROX.
SIZE LGTH. DIA. T’OUT ENGM'T PIN HOLE WGT.
SIZE A B C E F H R T DIA. EACH
A 0 1⁄ 2 61⁄8 4 91⁄8 7⁄ 8 11⁄2 11⁄4 1⁄ 4 11⁄ 16 7
T
0 M12 156 102 232 22 38 32 6 17 3.2
R
1 1⁄ 2 63⁄8 4 91⁄2 7⁄ 8 11⁄2 11⁄4 1⁄ 4 11⁄ 16 8
1 M12 162 102 241 22 38 32 6 17 3.6
2 1⁄ 2 7 4 91⁄8 7⁄ 8 11⁄2 11⁄4 1⁄ 4 11⁄ 16 9
H 2 M12 178 102 232 22 38 32 6 17 4.1
A
3 1⁄ 2 73⁄8 59⁄16 97 ⁄ 8 7⁄ 8 11⁄2 11⁄4 1⁄ 4 11⁄ 16 12
3 M12 187 141 251 22 38 32 6 17 5.4
4 1⁄ 2 73⁄8 59⁄16 93 ⁄ 8 7⁄ 8 11⁄2 11⁄4 1⁄ 4 11⁄ 16 13
4 M12 187 141 238 22 38 32 6 17 5.9
5 1⁄ 2 73⁄8 59⁄16 91 ⁄ 8 7⁄ 8 11⁄2 11⁄4 1⁄ 4 11⁄ 16 14
E 5 M12 187 141 232 22 38 32 6 17 6.4
B 6 5⁄ 8 81⁄2 65 ⁄ 8 101⁄2 11 ⁄ 8 11⁄2 11⁄4 1⁄ 4 13⁄ 16 20
6 M16 216 168 267 29 38 32 6 21 9.1
7 5⁄ 8 81⁄2 65 ⁄ 8 97 ⁄ 8 11 ⁄ 8 11⁄2 11⁄4 1⁄ 4 13⁄ 16 20
7 M16 216 168 251 29 38 32 6 21 9.1
8 5⁄ 8 81⁄2 65 ⁄ 8 95 ⁄ 8 11 ⁄ 8 11⁄2 11⁄4 1⁄ 4 13⁄ 16 22
8 M16 216 168 244 29 38 32 6 21 10
9 3⁄ 4 10 85 ⁄ 8 113⁄4 11 ⁄ 4 11⁄2 11⁄4 3⁄ 8 15⁄ 16 40
9 M20 254 219 298 32 38 32 10 24 18
10 3⁄ 4 10 85 ⁄ 8 113⁄4 11 ⁄ 4 11⁄2 11⁄4 3⁄ 8 15⁄ 16 43
10 M20 254 219 298 32 38 32 10 24 20
11 3⁄ 4 10 85 ⁄ 8 121⁄2 11 ⁄ 4 11⁄2 11⁄4 3⁄ 8 15⁄ 16 50
F A 11 M20 254 219 318 32 38 32 10 24 23
12 1 111⁄4 85 ⁄ 8 127⁄8 15 ⁄ 8 2 11⁄2 1⁄ 2 11⁄4 57
C 12 M24 286 219 327 41 51 38 13 32 26
13 1 111⁄4 85 ⁄ 8 121⁄2 15 ⁄ 8 2 11⁄2 1⁄ 2 11⁄4 64
13 M24 286 219 318 41 51 38 13 32 29
14 11⁄4 12 85 ⁄ 8 143⁄8 13 ⁄ 4 3 2 5⁄ 8 11⁄2 68
A-A 14 M30 305 219 365 44 76 51 16 38 31
15 11⁄4 12 85 ⁄ 8 143⁄8 13 ⁄ 4 3 2 5⁄ 8 11⁄2 88
15 M30 305 219 365 44 76 51 16 38 40
16 11⁄2 131⁄2 85 ⁄ 8 157⁄8 2 3 21⁄2 3⁄ 4 13⁄4 106
16 M36 343 219 403 51 76 64 19 44 48
17 13⁄4 151⁄8 85⁄8 171⁄4 25 ⁄ 8 3 21⁄2 3⁄ 4 2 143
17 M42 384 219 438 67 76 64 19 51 65
18 2 165⁄8 123⁄4 20 27⁄8 4 3 3⁄ 4 23⁄8 251
18 M48 422 324 508 73 102 76 19 60 114
19 21⁄4 181⁄4 123⁄4 217⁄8 31 ⁄ 2 41 ⁄ 2 3 3⁄ 4 25⁄8 284
19 M56 464 324 556 89 114 76 19 67 129
LUG HOLE 20 21⁄2 215⁄8 123⁄4 247⁄8 37 ⁄ 8 41⁄2 4 1 27 ⁄ 8 387
DIAMETER
20 M64 549 324 632 98 114 102 25 73 176
21 23⁄4 23 123⁄4 261⁄4 41 ⁄ 4 4 4 1 31⁄8 430
21 M72 584 324 667 108 114 102 25 79 195
22 3 271⁄2 123⁄4 313⁄4 41 ⁄ 4 5 4 1 33⁄8 577
22 M80x6 699 324 806 108 127 102 25 86 262

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load,
Cold Load, Movement and Direction of Movement (from the Cold/Installed
position to the Hot/Operating position), and Hanger Identification Number
(if any). Specify any other optional feature(s) as necessary.
Pins for attachment to the structure are not included with the unit and must
be ordered separately as a Figure 291, shown on page 8 of this catalog. For
ordering specify Figure Number, pin diameter and finish.
For corrosion resistant units specify the Figure Number with the letter prefix
“C”, e.g. C910
For metric units specify the Figure Number with the letter prefix “M” e.g.
M910 or MC910.

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

11
VARIABLE SPRING SUPPORTS

SERIES 910 - TYPE C

MIN. HGT.
ROD CASE CASE ROD THD. OF LUG APPROX.
SIZE LGTH. DIA. T’OUT ENGM'T PIN HOLE WGT
SIZE A B C E F H R S T DIA. EACH
0 1⁄ 2 61⁄8 4 91⁄8 7⁄ 8 11⁄2 11 ⁄ 4 7⁄ 8 1⁄ 4 11⁄ 16 7
S 0 M12 156 102 232 22 38 32 22 6 17 3.2
A
T 1 1⁄ 2 63⁄8 4 91⁄2 7⁄ 8 11⁄2 11 ⁄ 4 7⁄ 8 1⁄ 4 11⁄ 16 8
1 M12 162 102 241 22 38 32 22 6 17 3.6
R 2 1⁄ 2 63⁄4 4 91⁄8 7⁄ 8 11⁄2 11 ⁄ 4 7⁄ 8 1⁄ 4 11⁄ 16 9
2 M12 171 102 232 22 38 32 22 6 17 4.1
H 3 1⁄ 2 73⁄8 59⁄16 97⁄8 7⁄ 8 11⁄2 11 ⁄ 4 7⁄ 8 1⁄ 4 11⁄ 16 12
A 3 M12 187 141 251 22 38 32 22 6 17 5.4
4 1⁄ 2 73⁄8 59⁄16 93⁄8 7⁄ 8 11⁄2 11 ⁄ 4 7⁄ 8 1⁄ 4 11⁄ 16 13
4 M12 187 141 238 22 38 32 22 6 17 5.9
5 1⁄ 2 73⁄8 59⁄16 91⁄8 7⁄ 8 11⁄2 11 ⁄ 4 7⁄ 8 1⁄ 4 11⁄ 16 14
5 M12 187 141 232 22 38 32 22 6 17 6.4
E 6 5⁄ 8 81⁄2 65⁄8 101⁄2 11⁄8 11⁄2 11 ⁄ 4 11⁄16 1⁄ 4 13⁄ 16 20
B 6 M16 216 168 267 29 38 32 27 6 21 9.1
7 5⁄ 8 81⁄2 65⁄8 97⁄8 11⁄8 11⁄2 11 ⁄ 4 11⁄16 1⁄ 4 13⁄ 16 20
7 M16 216 168 251 29 38 32 27 6 21 9.1
8 5⁄ 8 81⁄2 65⁄8 95⁄8 11⁄8 11⁄2 11 ⁄ 4 11⁄16 1⁄ 4 13⁄ 16 22
8 M16 216 168 244 29 38 32 27 6 21 10
9 3⁄ 4 10 85⁄8 113⁄4 11⁄4 11⁄2 11 ⁄ 4 11⁄4 3⁄ 8 15⁄ 16 40
9 M20 254 219 298 32 38 32 32 10 24 18
10 3⁄ 4 10 85⁄8 113⁄4 11⁄4 11⁄2 11 ⁄ 4 11⁄4 3⁄ 8 15⁄ 16 43
10 M20 254 219 298 32 38 32 32 10 24 20
11 3⁄ 4 10 85⁄8 121⁄2 11⁄4 11⁄2 11 ⁄ 4 11⁄4 3⁄ 8 15⁄ 16 50
F A 11 M20 254 219 318 32 38 32 32 10 24 23
12 1 111⁄4 85⁄8 127⁄8 15⁄8 2 11 ⁄ 2 11⁄4 1⁄ 2 11 ⁄ 4 57
C 12 M24 286 219 327 41 51 38 32 13 32 26
13 1 111⁄4 85⁄8 121⁄2 15⁄8 2 11 ⁄ 2 11⁄4 1⁄ 2 11 ⁄ 4 64
13 M24 286 219 318 41 51 38 32 13 32 29
14 11⁄4 12 85⁄8 143⁄8 13⁄4 3 2 2 1⁄ 2 11 ⁄ 2 68
A-A 14 M30 305 219 365 44 76 51 51 13 38 31
15 11⁄4 12 85⁄8 143⁄8 13⁄4 3 2 2 5⁄ 8 11 ⁄ 2 88
15 M30 305 219 365 44 76 51 51 16 38 40
16 11⁄2 131⁄2 85⁄8 157⁄8 2 3 21 ⁄ 2 23⁄8 3⁄ 4 13 ⁄ 4 106
16 M36 343 219 403 51 76 64 60 19 44 48
17 13⁄4 151⁄8 85⁄8 171⁄4 25⁄8 3 21 ⁄ 2 23⁄8 3⁄ 4 2 143
17 M42 384 219 438 67 76 64 60 19 51 65
18 2 165⁄8 123⁄4 20 27⁄8 4 3 27 ⁄ 8 3⁄ 4 23 ⁄ 8 251
18 M48 422 324 508 73 102 76 73 19 60 114
19 21⁄4 181⁄4 123⁄4 217⁄8 31⁄2 41⁄2 3 31 ⁄ 8 3⁄ 4 25 ⁄ 8 284
LUG HOLE 19 M56 464 324 556 89 114 76 79 19 67 129
DIAMETER 20 21⁄2 215⁄8 123⁄4 247⁄8 37⁄8 41⁄2 4 33 ⁄ 8 1 27⁄8 387
20 M64 549 324 632 98 114 102 86 25 73 176
21 23⁄4 23 123⁄4 261⁄4 41⁄4 41⁄2 4 35 ⁄ 8 1 31⁄8 430
21 M72 584 324 667 108 114 102 92 25 79 195
22 3 271⁄2 123⁄4 313⁄4 41⁄4 5 4 37 ⁄ 8 1 33⁄8 577
22 M80x6 699 324 806 108 127 102 98 25 86 262

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold
Load, Movement and Direction of Movement (from the Cold/Installed position to
the Hot/Operating position), and Hanger Identification Number (if any). Specify
any other optional feature(s) as necessary.
Pins for attachment to the structure are not included with the unit and must be
ordered separately as a Figure 291, shown on page 8 of this catalog. For ordering
specify Figure Number, pin diameter and finish.
For corrosion resistant units specify the Figure Number with the letter prefix “C”,
e.g. C910
For metric units specify the Figure Number with the letter prefix “M” e.g. M910
or MC910.

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

12
 VARIABLE SPRING SUPPORTS

SERIES 910 TYPE D

ROD CASE CASE ROD HGT. OF APPROX.
HANGER SIZE LENGTH DIA. TAKEOUT SPACER WEIGHT
SIZE A B C E M EACH
0 1⁄ 2 61 ⁄ 8 4 91⁄2 21⁄4 6
A 0 M12 156 102 241 57 2.7
1 1⁄ 2 63 ⁄ 8 4 93⁄8 21⁄4 6
ROD, NUTS, 1 M12 162 102 238 57 2.7
AND WASHER 2 1⁄ 2 7 4 10 21⁄4 7
NOT FURNISHED 2 M12 178 102 254 57 3.2
M 3 1⁄ 2 73 ⁄ 8 59⁄16 103⁄8 21⁄4 10
3 M12 187 141 264 57 4.5
4 1⁄ 2 73 ⁄ 8 59⁄16 103⁄8 21⁄4 11
4 M12 187 141 264 57 5
5 1⁄ 2 73 ⁄ 8 59⁄16 103⁄8 21⁄4 12
E
5 M12 187 141 264 57 5.4
6 5⁄ 8 81 ⁄ 2 65 ⁄ 8 113⁄4 23⁄8 18
6 M16 216 168 298 60 8.2
B 7 5⁄ 8 81 ⁄ 2 65 ⁄ 8 113⁄4 23⁄8 17
7 M16 216 168 298 60 7.7
8 5⁄ 8 81 ⁄ 2 65 ⁄ 8 113⁄4 23⁄8 20
8 M16 216 168 298 60 9.1
9 3⁄ 4 10 85⁄8 133⁄4 25⁄8 36
9 M20 254 219 349 67 16
10 3⁄ 4 10 85⁄8 133⁄4 25⁄8 39
10 M20 254 219 349 67 18
11 3⁄ 4 10 85⁄8 133⁄4 25⁄8 46
11 M20 254 219 349 67 21
12 1 111⁄4 85 ⁄ 8 155⁄8 27⁄8 50
12 M24 286 219 397 73 23
13 1 111⁄4 85 ⁄ 8 155⁄8 27⁄8 57
13 M24 286 219 397 73 26
C 14 11⁄4 12 85⁄8 171⁄8 31⁄4 59
14 M30 305 219 435 83 27
15 11⁄4 12 85⁄8 17 31⁄8 77
15 M30 305 219 432 79 35
16 11⁄2 131⁄2 85 ⁄ 8 191⁄4 31⁄2 95
16 M36 343 219 489 89 43
17 13⁄4 151⁄8 85 ⁄ 8 211⁄2 33⁄4 128
17 M42 384 219 546 95 58
18 2 165⁄8 123⁄4 235⁄8 4 230
18 M48 422 324 600 102 104
19 21⁄4 181⁄4 123⁄4 257⁄8 41⁄4 258
19 M56 464 324 657 108 117
20 21⁄2 215⁄8 123⁄4 295⁄8 41⁄4 342
20 M64 549 324 752 108 155
21 23⁄4 23 123⁄4 315⁄8 41⁄2 379
21 M72 584 324 752 114 172
22 3 271⁄2 123⁄4 37 5 485
22 M80x6 699 324 940 127 220

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot

Load, Cold Load, Movement and Direction of Movement (from the
Cold/Installed position to the Hot/Operating position), and Hanger
Identification Number (if any). Specify any other optional feature(s)
as necessary.
For corrosion resistant units specify the Figure Number with the letter
prefix “C”, e.g. C910
For metric units specify the Figure Number with the letter prefix “M”
e.g. M910 or MC910.

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

13
VARIABLE SPRING SUPPORTS

SERIES 910 TYPE E

ROD CASE CASE MIN. THD. APPROX.
HANGER SIZE LENGTH DIAMETER ENGM'T WEIGHT
SIZE A B C F EACH
0 1⁄ 2 61⁄8 4 7⁄ 8 6
C
0 M12 156 102 22 2.7
1 1⁄ 2 63⁄8 4 7⁄ 8 6
MUST BE 1 M12 162 102 22 2.7
R.H. AND L.H. 2 1⁄ 2 7 4 7⁄ 8 7
TACK WELDED
ROD AND
BY CUSTOMER
NUT NOT 2 M12 178 102 22 3.2
FURNISHED, 3 1⁄ 2 73⁄8 59⁄16 7⁄ 8 10
LENGTH 3 M12 187 141 22 4.5
TO SUIT 4 1⁄ 2 73⁄8 5 9⁄16 7⁄ 8 11
B CUSTOMER
REQUIREMENT 4 M12 187 141 22 5
5 1⁄ 2 73⁄8 5 9⁄16 7⁄ 8 12
5 M12 187 141 22 5.4
6 5⁄ 8 81⁄2 65 ⁄ 8 11⁄8 17
6 M16 216 168 29 7.7
7 5⁄ 8 81⁄2 65 ⁄ 8 11⁄8 18
7 M16 216 168 29 8.2
F 8 5⁄ 8 81⁄2 65 ⁄ 8 11⁄8 20
8 M16 216 168 29 9.1
9 3⁄ 4 10 85⁄8 11⁄4 36
9 M20 254 219 32 16
L.H. THD. 10 3⁄ 4 10 85⁄8 11⁄4 39
10 M20 254 219 32 18
11 3⁄ 4 10 85⁄8 11⁄4 46
6" 11 M20 254 219 32 21
12 1 111⁄4 85 ⁄ 8 15⁄8 50
MUST BE 12 M24 286 219 41 23
TACK WELDED 13 1 111⁄4 85 ⁄ 8 15⁄8 57
BY CUSTOMER 13 M24 286 219 41 26
14 11⁄4 12 85⁄8 13⁄4 59
14 M30 305 219 44 27
A F 15 11⁄4 12 85⁄8 13⁄4 77
15 M30 305 219 44 35
TURNBUCKLE 16 11⁄2 131⁄2 85 ⁄ 8 2 95
IS FURNISHED
16 M36 343 219 51 43
17 13⁄4 151⁄8 8 ⁄8
5 25⁄8 128
17 M42 384 219 67 58
18 2 165⁄8 123⁄4 27⁄8 230
18 M48 422 324 73 104
19 21⁄4 181⁄4 123⁄4 31⁄2 258
19 M56 464 324 89 117
20 21⁄2 215⁄8 123⁄4 37⁄8 342
20 M64 549 324 98 155
21 23⁄4 23 123⁄4 41⁄4 379
21 M72 584 324 108 172
22 3 271⁄2 123⁄4 41⁄4 485
22 M80X6 699 324 108 220

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot

Load, Cold Load, Movement and Direction of Movement (from the
Cold/Installed position to the Hot/Operating position), and Hanger
Identification Number (if any). Specify any other optional feature(s)
as necessary.
For corrosion resistant units specify the Figure Number with the letter
prefix “C”, e.g. C910
For metric units specify the Figure Number with the letter prefix “M”
e.g. M910 or MC910.

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

14
 VARIABLE SPRING SUPPORTS

SERIES 910 - TYPE F

CASE CASE BOTTOM BOLT OVERALL LOAD LOAD APPROX.
LNGTH. DIA. FLANGE BOTTOM CIRCLE LNGTH. X ** FLANGE FLANGE WGT.
SIZE B C BOLT DIA. FLANGE MIN. MAX. MIN. MAX. DIA. THICK. EACH
0 45⁄8 4 5⁄ 8 1⁄ 4 x 71⁄2 x 71⁄2 7 93⁄4 61⁄8 65⁄8 37⁄8 1⁄ 4 12
0 117 102 M16 6 x 190 x 190 178 248 156 168 98 6 5.4
IN. LBS.
1 47⁄8 4 5⁄ 8 1⁄ 4 x 71⁄ 2 x 71⁄ 2 7 93⁄4 63⁄8 67⁄8 37⁄8 1⁄ 4 12
0
1/4
1/2
3/4
1
1 1/4
1 124 102 M16 6 x 190 x 190 178 248 162 175 98 6 5.4
S.R.

TYPE SIZE
2 5 1⁄2 4 5⁄ 8 1⁄ 4 x 71⁄ 2 x 71⁄ 2 7 93⁄4 7 7 1⁄ 2 37⁄8 1⁄ 4 13
HOT COLD

MK.#

SERIAL
NUMBER

FIGURE NO. 910

2 140 102 M16 6 x 190 x 190 178 248 178 191 98 6 5.9
X 3 51⁄8 59⁄16 3⁄ 4 1⁄ 4 x 71⁄ 2 x 71⁄ 2 73⁄4 93⁄4 61⁄2 71⁄8 53⁄8 1⁄ 4 18
B
3 130 141 M20 6 x 190 x 190 197 248 165 181 137 6 8.2
4 51⁄2 59⁄16 3⁄ 4 1⁄ 4 x 71⁄ 2 x 71⁄ 2 73⁄4 93⁄4 67⁄8 71⁄2 53⁄8 1⁄ 4 20
4 140 141 M20 6 x 190 x 190 197 248 175 191 137 6 9.1
5 57⁄8 59⁄16 3⁄ 4 1⁄ 4 x 71⁄ 2 x 71⁄ 2 73⁄4 93⁄4 71⁄4 77⁄8 53⁄8 1⁄ 4 21
5 149 141 M20 6 x 190 x 190 197 248 184 200 137 6 9.5
6 57⁄8 65⁄8 3⁄ 4 3⁄ 8 x 9 x 9 91⁄4 101⁄2 71⁄2 8 63⁄8 1⁄ 4 33
6 149 168 M20 9 x 229 x 229 235 267 191 203 162 6 15
C 7 57⁄8 65⁄8 3⁄ 4 3⁄ 8 x 9 x 9 91⁄4 101⁄2 81⁄8 83⁄4 63⁄8 1⁄ 4 33
7 149 168 M20 9 x 229 x 229 235 267 206 222 162 6 15
8 65⁄8 65⁄8 3⁄ 4 3⁄ 8 x 9 x 9 91⁄4 101⁄2 83⁄8 9 63⁄8 1⁄ 4 35
8 168 168 M20 9 x 229 x 229 235 267 213 229 162 6 16
9 73⁄8 85⁄8 3⁄ 4 1⁄ 2 x131⁄ 4 x131⁄ 4 109⁄16 161⁄4 93⁄8 103⁄8 83⁄8 1⁄ 2 68
9 187 219 M20 13 x 337 x 337 268 413 238 264 213 13 31
10 77⁄8 85⁄8 3⁄ 4 1⁄ 2 x131⁄ 4 x131⁄ 4 109⁄16 161⁄4 97⁄8 107⁄8 83⁄8 1⁄ 2 71
10 200 219 M20 13 x 337 x 337 268 413 251 276 213 13 32
11 61⁄2 85⁄8 3⁄ 4 1⁄ 2 x131⁄ 4 x131⁄ 4 109⁄16 161⁄4 81⁄2 91⁄2 83⁄8 1⁄ 2 74
LE

13 x 337 x 337
C

11 165 219 M20 268 413 216 241 213 13 34

IR

12 67⁄8 85⁄8 3⁄ 4 1⁄ 2 x131⁄ 4 x131⁄ 4 109⁄16 161⁄4 87⁄8 97⁄8 83⁄8 1⁄ 2 78

C
LT

12 175 219 M20 13 x 337 x 337 268 413 225 251 213 13 35
BO

13 81⁄4 85⁄8 3⁄ 4 1⁄ 2 x131⁄ 4 x131⁄ 4 109⁄16 161⁄4 101⁄4 111⁄4 83⁄8 1⁄ 2 81

13 210 219 M20 13 x 337 x 337 268 413 260 286 213 13 37
14 81⁄2 85⁄8 3⁄ 4 1⁄ 2 x131⁄ 4 x131⁄ 4 109⁄16 161⁄4 101⁄2 111⁄2 83⁄8 1⁄ 2 84
14 216 219 M20 13 x 337 x 337 268 413 267 292 213 13 38
15 83⁄4 85⁄8 3⁄ 4 1⁄ 2 x131⁄ 4 x131⁄ 4 109⁄16 161⁄4 103⁄4 113⁄4 83⁄8 1⁄ 2 98
15 222 219 M20 13 x 337 x 337 268 413 273 298 213 13 44
16 10 85⁄8 3⁄ 4 1⁄ 2 x131⁄ 4 x131⁄ 4 109⁄16 161⁄4 12 13 83⁄8 1⁄ 2 113
16 254 219 M20 13 x 337 x 337 268 413 305 330 213 13 51
17 111⁄4 85⁄8 3⁄ 4 1⁄ 2 x131⁄ 4 x131⁄ 4 109⁄16 161⁄4 131⁄4 141⁄4 83⁄8 1⁄ 2 138
17 286 219 M20 13 x 337 x 337 268 413 337 362 213 13 63
18 121⁄8 123⁄4 3⁄ 4 5⁄ 8 x171⁄ 4 x171⁄ 4 153⁄4 21 137⁄8 147⁄8 121⁄2 1⁄ 2 253
18 308 324 M20 16 x 438 x 438 400 533 352 378 318 13 115
19 131⁄8 123⁄4 3⁄ 4 5⁄ 8 x171⁄ 4 x171⁄ 4 153⁄4 21 147⁄8 157⁄8 121⁄2 1⁄ 2 271
19 333 324 M20 16 x 438 x 438 400 533 378 403 318 13 123
20 151⁄4 123⁄4 3⁄ 4 5⁄ 8 x171⁄ 4 x171⁄ 4 153⁄4 21 17 18 121⁄2 1⁄ 2 337
20 387 324 M20 16 x 438 x 438 400 533 432 457 318 13 153
21 157⁄8 123⁄4 3⁄ 4 5⁄ 8 x171⁄ 4 x171⁄ 4 153⁄4 21 18 19 121⁄2 1⁄ 2 356
21 403 324 M20 16 x 438 x 438 400 533 457 483 318 13 161
22 201⁄8 123⁄4 3⁄ 4 5⁄ 8 x171⁄ 4 x171⁄ 4 153⁄4 21 221⁄4 231⁄4 121⁄2 1⁄ 2 443
22 511 324 M20 16 x 438 x 438 400 533 565 591 318 13 201
** The Installed Height should be the mid-point between the Maximum and Minimum Overall
Height "X" , plus the thickness of the Load Flange, and plus any DOWN piping movement
when applicable.

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load,
Movement and Direction of Movement (from the Cold/Installed position to the
Hot/Operating position), Dimension X (Installed Height) and Hanger Identification
Number (if any). Specify any other optional feature(s) as necessary.
For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C910
For metric units specify the Figure Number with the letter prefix “M” e.g. M910 or MC910.

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

15
VARIABLE SPRING SUPPORTS

Ordering: Specify Figure Number

(Travel Series), Type, Size, Total
C-C Rod Dimension as specified Load, Hot Load per spring, Cold Load
A F by customer
per spring, Movement and Direction
of Movement (from the Cold/Installed
position to the Hot/Operating position),
E Center to Center of Rods dimension
P
and Hanger Identification Number
FIGURE NO. 910
NUMBER
SERIAL

MK.#
FIGURE NO. 910
NUMBER
SERIAL

MK.#
(if any). Specify any other optional
B TYPE

S.R.
HOT

SIZE
COLD
W TYPE

S.R.
HOT COLD

SIZE
feature(s) as necessary.
1 1/4

3/4
1/2
1
1 1/4
1
3/4
1/2
For corrosion resistant units specify
IN.
1/4
0
LBS. IN.
1/4
0
LBS. the Figure Number with the letter pre-
fix “C”, e.g. C910
C
For metric units specify the Figure
Number with the letter prefix “M” e.g.
M910 or MC910.
FIGURE 910 TYPE G
ROD CASE CASE ROD MIN. THD. CHANNEL APPROX.
HANGER SIZE LENGTH DIAMETER TAKEOUT ENGM'T CHANNEL MAX. SPACING WEIGHT
SIZE A B C E F SIZE C-C W P EACH
0 1⁄ 2 61 ⁄ 8 4 23⁄8 7⁄ 8 C3 x 4.1 24 5⁄ 8 11 ⁄ 2 25
0 M12 156 102 60 22 C75 x 6 610 16 38 11.3
1 1⁄ 2 63 ⁄ 8 4 23⁄8 7⁄ 8 C3 x 4.1 24 5⁄ 8 11 ⁄ 2 25
1 M12 162 102 60 22 C75 x 6 610 16 38 11.3
2 1⁄ 2 7 4 23⁄8 7⁄ 8 C3 x 4.1 24 5⁄ 8 11 ⁄ 2 26
2 M12 178 102 60 22 C75 x 6 610 16 38 11.8
3 1⁄ 2 73 ⁄ 8 59⁄16 27 ⁄ 8 7⁄ 8 C3 x 4.1 30 3⁄ 4 2 32
3 M12 187 141 73 22 C75 x 6 762 19 51 14.5
4 1⁄ 2 73 ⁄ 8 59⁄16 27 ⁄ 8 7⁄ 8 C3 x 4.1 30 3⁄ 4 2 35
4 M12 187 141 73 22 C75 x 6 762 19 51 15.9
5 1⁄ 2 73 ⁄ 8 59⁄16 27 ⁄ 8 7⁄ 8 C3 x 4.1 30 3⁄ 4 2 37
5 M12 187 141 73 22 C75 x 6 762 19 51 16.8
6 5⁄ 8 81 ⁄ 2 65⁄8 31 ⁄ 8 11⁄8 C3 x 4.1 36 1 2 49
6 M16 216 168 79 29 C75 x 6 914 25 51 22.2
7 5⁄ 8 81 ⁄ 2 65⁄8 31 ⁄ 8 11⁄8 C3 x 4.1 36 1 2 48
7 M16 216 168 79 29 C75 x 6 914 25 51 21.8
8 5⁄ 8 81 ⁄ 2 65⁄8 31 ⁄ 8 11⁄8 C3 x 4.1 36 1 2 53
8 M16 216 168 79 29 C75 x 6 914 25 51 24
9 3⁄ 4 10 85⁄8 41 ⁄ 4 11⁄4 C4 x 5.4 36 11⁄4 3 86
9 M20 254 219 108 32 C100 x 8 914 32 76 39
10 3⁄ 4 10 85⁄8 41 ⁄ 4 11⁄4 C4 x 5.4 36 11⁄4 3 92
10 M20 254 219 108 32 C100 x 8 914 32 76 41.7
11 3⁄ 4 10 85⁄8 41 ⁄ 4 11⁄4 C4 x 5.4 36 11⁄4 3 109
11 M20 254 219 108 32 C100 x 8 914 32 76 49.4
12 1 111⁄4 85⁄8 55 ⁄ 8 15⁄8 C5 x 6.7 36 11⁄2 4 121
12 M24 286 219 143 41 C130 x 10 914 38 102 54.9
13 1 111⁄4 85⁄8 55 ⁄ 8 15⁄8 C5 x 6.7 36 11⁄2 4 138
13 M24 286 219 143 41 C130 x 10 914 38 102 62.6
14 11⁄4 12 85⁄8 53 ⁄ 4 13⁄4 C5 x 6.7 33 11⁄2 4 144
14 M30 305 219 146 44 C130 x 10 838 38 102 65.3
15 11⁄4 12 85⁄8 53 ⁄ 4 13⁄4 C8 x 11.5 36 21 ⁄ 8 4 190
15 M30 305 219 146 44 C200 x 17 914 54 102 86.2
16 11⁄2 131⁄2 85⁄8 6 2 C8 x 11.5 36 21 ⁄ 8 4 226
16 M36 343 219 152 51 C200 x 17 914 54 102 102.5
17 13⁄4 151⁄8 85⁄8 65 ⁄ 8 25⁄8 C8 x 11.5 36 21 ⁄ 8 4 300
17 M42 384 219 168 67 C200 x 17 914 54 102 136.1
18 2 165⁄8 123⁄4 67 ⁄ 8 27⁄8 C12 x 20.7 42 25⁄8 4 518
18 M48 422 324 175 73 C130 x 31 1067 67 102 235
19 21⁄4 181⁄4 123⁄4 71 ⁄ 2 31⁄2 C12 x 20.7 42 25⁄8 4 582
19 M56 464 324 191 89 C130 x 31 1067 67 102 264
20 21⁄2 215⁄8 123⁄4 77 ⁄ 8 37⁄8 C12 x 20.7 40 25⁄8 4 763
20 M64 549 324 200 98 C130 x 31 1016 67 102 346.1
21 23⁄4 23 123⁄4 81 ⁄ 4 41⁄4 C15 x 33.9 48 31⁄8 4 874
21 M72 584 324 210 108 C380 x 50 1219 79 102 396.4
22 3 271⁄2 123⁄4 81 ⁄ 4 41⁄4 C15 x 33.9 48 33⁄8 4 1163
22 M80x6 699 324 210 108 C380 x 50 1219 86 102 527.5

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

16
 VARIABLE SPRING SUPPORTS

SERIES 920 - TYPE A

ROD CASE CASE ROD MIN. THD. ROD APPRX.
G A SIZE LNGTH DIA. T’OUT ENGM'T ENGM'T WGT.
SIZE A B C E F G EACH
000 1⁄ 2 8 4 77⁄8 7⁄ 8 7⁄ 8 6
000 M12 203 102 200 22 22 2.7
00 1⁄ 2 91 ⁄ 4 4 87⁄8 7⁄ 8 7⁄ 8 7
00 M12 235 102 225 22 22 3.2
0 1⁄ 2 97 ⁄ 8 4 91⁄2 7⁄ 8 7⁄ 8 10
0 M12 251 102 241 22 22 4.5
1 1⁄ 2 97 ⁄ 8 4 91⁄2 7⁄ 8 7⁄ 8 11
B 1 M12 251 102 241 22 22 5
E 2 1⁄ 2 97 ⁄ 8 4 91⁄2 7⁄ 8 7⁄ 8 12
2 M12 251 102 241 22 22 5.4
3 1⁄ 2 10 59⁄16 95 ⁄ 8 7⁄ 8 7⁄ 8 17
3 M12 254 141 244 22 22 7.7
4 1⁄ 2 10 59⁄16 95 ⁄ 8 7⁄ 8 7⁄ 8 19
4 M12 254 141 24 1 22 22 8.6
5 1⁄ 2 10 59⁄16 95 ⁄ 8 7⁄ 8 7⁄ 8 20
5 M12 254 141 24 22 22 9.1
6 5⁄ 8 113⁄4 65⁄8 111⁄4 11⁄8 11 ⁄ 8 28
6 M16 298 168 286 29 29 13
F 7 5⁄ 8 113⁄4 65⁄8 111⁄4 11⁄8 11 ⁄ 8 29
C 7 M16 298 168 286 29 29 13
8 5⁄ 8 113⁄4 6 5⁄ 8 111⁄4 11⁄8 11 ⁄ 8 32
8 M16 298 168 286 29 29 15
9 3⁄ 4 121⁄2 85⁄8 121⁄8 11⁄4 11 ⁄ 4 54
9 M20 318 219 308 32 32 24
10 3⁄ 4 133⁄4 85⁄8 133⁄8 11⁄4 11 ⁄ 4 67
10 M20 349 219 340 32 32 30
11 3⁄ 4 121⁄2 85⁄8 121⁄8 11⁄4 11 ⁄ 4 68
11 M20 318 219 308 32 32 31
12 1 13 85⁄8 125⁄8 15⁄8 15 ⁄ 8 76
12 M24 330 219 321 41 41 34
13 1 155⁄8 85⁄8 151⁄4 15⁄8 15 ⁄ 8 85
13 M24 397 219 387 41 41 39
14 11⁄4 161⁄2 85⁄8 16 13⁄4 13 ⁄ 4 90
14 M30 419 219 406 44 44 41
15 11⁄4 161⁄2 85⁄8 16 13⁄4 13 ⁄ 4 120
15 M30 419 219 406 44 44 54
16 11⁄2 19 85⁄8 185⁄8 2 2 156
16 M36 483 219 473 51 51 71
17 13⁄4 211⁄4 85⁄8 205⁄8 25 ⁄ 8 25 ⁄ 8 211
17 M42 540 219 524 67 67 96
18 2 203⁄4 123⁄4 203⁄8 27⁄8 27 ⁄ 8 338
18 M48 527 324 518 73 73 153
19 21⁄4 231⁄2 123⁄4 231⁄8 31⁄2 31 ⁄ 2 382
19 M56 597 324 587 89 89 173
20 21⁄2 291⁄4 123⁄4 287⁄8 37⁄8 37 ⁄ 8 546
20 M64 743 324 733 98 98 248
21 23⁄4 323⁄8 123⁄4 32 41⁄4 41 ⁄ 4 601
21 M72 822 324 813 108 108 273
22 3 385⁄8 123⁄4 385⁄8 41⁄4 41 ⁄ 4 811
22 M80x6 981 324 981 108 108 368

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot

Load, Cold Load, Movement and Direction of Movement (from the
Cold/Installed position to the Hot/Operating position), and Hanger
Identification Number (if any). Specify any other optional feature(s)
as necessary.
For corrosion resistant units specify the Figure Number with the letter
prefix “C”, e.g. C920
For metric units specify the Figure Number with the letter prefix “M”
e.g. M920 or MC920.

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

17
VARIABLE SPRING SUPPORTS

FIGURE 920 TYPE B

MIN. HGT.
ROD CASE CASE ROD THREAD OF LUG APPROX.
A SIZE LNGTH. DIA. T’OUT ENGM'T PIN HOLE WEIGHT
T SIZE A B C E F H R T DIA. EACH
R 000 1⁄ 2 8 4 91⁄8 7⁄ 8 11⁄2 11 ⁄ 4 1⁄ 4 11⁄ 16 6
000 M12 203 102 232 22 38 32 6 17 2.7
H 00 1⁄ 2 91⁄4 4 101⁄8 7⁄ 8 11⁄2 11 ⁄ 4 1⁄ 4 11⁄ 16 7
A 00 M12 235 102 257 22 38 32 6 17 3.2
0 1⁄ 2 97⁄8 4 11 7⁄ 8 11⁄2 11 ⁄ 4 1⁄ 4 11⁄ 16 10
0 M12 251 102 279 22 38 32 6 17 4.5
1 1⁄ 2 97⁄8 4 11 7⁄ 8 11⁄2 11 ⁄ 4 1⁄ 4 11⁄ 16 11
1 M12 251 102 279 22 38 32 6 17 5
E 2 1⁄ 2 97⁄8 4 11 7⁄ 8 11⁄2 11 ⁄ 4 1⁄ 4 11⁄ 16 12
B 2 M12 251 102 279 22 38 32 6 17 5.4
3 1⁄ 2 10 59⁄16 111⁄8 7⁄ 8 11⁄2 11 ⁄ 4 1⁄ 4 11⁄ 16 17
3 M12 254 141 283 22 38 32 6 17 7.7
4 1⁄ 2 10 59⁄16 111⁄8 7⁄ 8 11⁄2 11 ⁄ 4 1⁄ 4 11⁄ 16 19
4 M12 254 141 283 22 38 32 6 17 8.6
5 1⁄ 2 10 59⁄16 111⁄8 7⁄ 8 11⁄2 11 ⁄ 4 1⁄ 4 11⁄ 16 20
5 M12 254 141 283 22 38 32 6 17 9.1
6 5⁄ 8 113⁄4 65⁄8 123⁄4 11⁄8 11⁄2 11 ⁄ 4 1⁄ 4 13⁄ 16 28
6 M16 298 168 324 29 38 32 6 21 13
F 7 5⁄ 8 113⁄4 65⁄8 123⁄4 11⁄8 11⁄2 11 ⁄ 4 1⁄ 4 13⁄ 16 29
A 7 M16 298 168 324 29 38 32 6 21 13
C 8 5⁄ 8 113⁄4 65⁄8 123⁄4 11⁄8 11⁄2 11 ⁄ 4 1⁄ 4 13⁄ 16 32
8 M16 298 168 324 29 38 32 6 21 15
9 3⁄ 4 121⁄2 85⁄8 135⁄8 11⁄4 11⁄2 11 ⁄ 4 3⁄ 8 15⁄ 16 54
9 M20 318 219 346 32 38 32 10 24 24
A-A 10 3⁄ 4 133⁄4 85⁄8 147⁄8 11⁄4 11⁄2 11 ⁄ 4 3⁄ 8 15⁄ 16 67
10 M20 349 219 378 32 38 32 10 24 30
11 3⁄ 4 121⁄2 85⁄8 135⁄8 11⁄4 11⁄2 11 ⁄ 4 3⁄ 8 15⁄ 16 68
11 M20 318 219 346 32 38 32 10 24 31
12 1 13 85⁄8 145⁄8 15⁄8 2 11⁄2 1⁄ 2 11⁄4 76
12 M24 330 219 371 41 51 38 13 32 34
13 1 155⁄8 85⁄8 171⁄4 15⁄8 2 11⁄2 1⁄ 2 11⁄4 85
13 M24 397 219 438 41 51 38 13 32 39
14 11⁄4 161⁄2 85⁄8 19 13 ⁄ 4 3 11⁄2 1⁄ 2 11⁄2 90
14 M30 419 219 483 44 76 38 13 38 41
LUG HOLE 15 11⁄4 161⁄2 85⁄8 19 13 ⁄ 4 3 2 5⁄ 8 11⁄2 120
DIAMETER 15 M30 419 219 483 44 76 51 16 38 54
16 11⁄2 19 85⁄8 215⁄8 2 3 21⁄2 3⁄ 4 13⁄4 156
16 M36 483 219 549 51 76 64 19 44 71
17 13⁄4 211⁄4 85⁄8 235⁄8 25⁄8 3 21⁄2 3⁄ 4 2 211
17 M42 540 219 600 67 76 64 19 51 96
18 2 203⁄4 123⁄4 243⁄8 27⁄8 4 3 3⁄ 4 23⁄8 338
18 M48 527 324 619 73 102 76 19 60 153
19 21⁄4 231⁄2 123⁄4 275⁄8 31⁄2 41⁄2 3 3⁄ 4 25⁄8 382
19 M56 597 324 702 89 114 76 19 67 173
20 21⁄2 291⁄4 123⁄4 333⁄8 37⁄8 41⁄2 4 1 27 ⁄ 8 546
20 M64 743 324 848 98 114 102 25 73 248
21 23⁄4 323⁄8 123⁄4 361⁄2 41⁄4 41⁄2 4 1 31 ⁄ 8 601
21 M72 822 324 927 108 114 102 25 79 273
22 3 385⁄8 123⁄4 435⁄8 41⁄4 5 4 1 33⁄8 811
22 M80x6 981 324 1108 108 127 102 25 86 368

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load,
Cold Load, Movement and Direction of Movement (from the Cold/Installed
position to the Hot/Operating position), and Hanger Identification Number
(if any). Specify any other optional feature(s) as necessary.
Pins for attachment to the structure are not included with the unit and must
be ordered separately as a Figure 291, shown on page 8 of this catalog. For
ordering specify Figure Number, pin diameter and finish.
For corrosion resistant units specify the Figure Number with the letter prefix
“C”, e.g. C910
For metric units specify the Figure Number with the letter prefix “M” e.g.
M910 or MC910.
DIMENSIONS TEMPERATURE LOADS WEIGHT
INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

18
 VARIABLE SPRING SUPPORTS

SERIES 920 - TYPE C

MIN.
S ROD CASE CASE ROD THD. HGT. LUG APPROX.
A
SIZE LNGTH DIA. T’OUT ENGM'T OF PIN HOLE WEIGHT
T
SIZE A B C E F H R S T DIA. EACH
R 000 1⁄ 2 8 4 91 ⁄ 8 7⁄ 8 11⁄2 11⁄4 7⁄ 8 1⁄ 4 11⁄ 16 6
000 M12 203 102 232 22 38 32 22 6 17 2.7
H 00 1⁄ 2 91⁄4 4 101⁄8 7⁄ 8 11⁄2 11⁄4 7⁄ 8 1⁄ 4 11⁄ 16 7
A 00 M12 235 102 257 22 38 32 22 6 17 3.2
0 1⁄ 2 97⁄8 4 11 7⁄ 8 11⁄2 11⁄4 7⁄ 8 1⁄ 4 11⁄ 16 10
0 M12 251 102 279 22 38 32 22 6 17 4.5
1 1⁄ 2 97⁄8 4 11 7⁄ 8 11⁄2 11⁄4 7⁄ 8 1⁄ 4 11⁄ 16 11
1 M12 251 102 279 22 38 32 22 6 17 5
E 2 1⁄ 2 97⁄8 4 11 7⁄ 8 11⁄2 11⁄4 7⁄ 8 1⁄ 4 11⁄ 16 12
B 2 M12 251 102 279 22 38 32 22 6 17 5.4
3 1⁄ 2 10 59⁄16 111⁄8 7⁄ 8 11⁄2 11⁄4 7⁄ 8 1⁄ 4 11⁄ 16 17
3 M12 254 141 283 22 38 32 22 6 17 7.7
4 1⁄ 2 10 59⁄16 111⁄8 7⁄ 8 11⁄2 11⁄4 7⁄ 8 1⁄ 4 11⁄ 16 19
4 M12 254 141 283 22 38 32 22 6 17 8.6
5 1⁄ 2 10 59⁄16 111⁄8 7⁄ 8 11⁄2 11⁄4 7⁄ 8 1⁄ 4 11⁄ 16 20
5 M12 254 141 283 22 38 32 22 6 17 9.1
6 5⁄ 8 113⁄4 65⁄8 123⁄4 11⁄8 11⁄2 11⁄4 11⁄16 1⁄ 4 13⁄ 16 28
6 M16 298 168 324 29 38 32 27 6 21 13
7 5⁄ 8 113⁄4 65⁄8 123⁄4 11⁄8 11⁄2 11⁄4 11⁄16 1⁄ 4 13⁄ 16 29
F A 7 M16 298 168 324 29 38 32 27 6 21 13
8 5⁄ 8 113⁄4 65⁄8 123⁄4 11⁄8 11⁄2 11⁄4 11⁄16 1⁄ 4 13⁄ 16 32
C 8 M16 298 168 324 29 38 32 27 6 21 15
9 3⁄ 4 121⁄2 85⁄8 135⁄8 11⁄4 11⁄2 11⁄4 11⁄4 3⁄ 8 15⁄ 16 54
9 M20 318 219 346 32 38 32 32 10 24 24
10 3⁄ 4 133⁄4 85⁄8 147⁄8 11⁄4 11⁄2 11⁄4 11⁄4 3⁄ 8 15⁄ 16 67
A-A 10 M20 349 219 378 32 38 32 32 10 24 30
11 3⁄ 4 121⁄2 85⁄8 135⁄8 11⁄4 11⁄2 11⁄4 11⁄4 3⁄ 8 15⁄ 16 68
11 M20 318 219 346 32 38 32 32 10 24 31
12 1 13 85 ⁄ 8 145⁄8 15⁄8 2 11 ⁄ 2 11⁄4 1⁄ 2 11⁄4 76
12 M24 330 219 371 41 51 38 32 13 32 34
13 1 155⁄8 85⁄8 171⁄4 15⁄8 2 11 ⁄ 2 11⁄4 1⁄ 2 11⁄4 85
13 M24 397 219 438 41 51 38 32 13 32 39
14 11⁄4 161⁄2 85⁄8 19 13 ⁄ 4 3 11 ⁄ 2 2 1⁄ 2 11⁄2 90
14 M30 419 219 483 44 76 38 51 13 38 41
15 11⁄4 161⁄2 85⁄8 19 13 ⁄ 4 3 2 2 5⁄ 8 11⁄2 120
LUG HOLE 15 M30 419 219 483 44 76 51 51 16 38 54
DIAMETER 16 11⁄2 19 85 ⁄ 8 215⁄8 2 3 21 ⁄ 2 23⁄8 3⁄ 4 13⁄4 156
16 M36 483 219 549 51 76 64 60 19 44 71
17 13⁄4 211⁄4 85⁄8 235⁄8 25⁄8 3 21 ⁄ 2 23⁄8 3⁄ 4 2 211
17 M42 540 219 600 67 76 64 60 19 51 96
18 2 20 3⁄4 123⁄4 243⁄8 27⁄8 4 3 27 ⁄ 8 3⁄ 4 23⁄8 338
18 M48 527 324 619 73 102 76 73 19 60 153
19 21⁄4 231⁄2 123⁄4 275⁄8 31⁄2 41⁄2 3 31 ⁄ 8 3⁄ 4 25⁄8 382
19 M56 597 324 702 89 114 76 79 19 67 173
20 21⁄2 291⁄4 123⁄4 333⁄8 37⁄8 41⁄2 4 33 ⁄ 8 1 27 ⁄ 8 546
20 M64 743 324 848 98 114 102 86 25 73 248
21 23⁄4 323⁄8 123⁄4 361⁄2 41⁄4 41⁄2 4 35 ⁄ 8 1 31 ⁄ 8 601
21 M72 822 324 927 108 114 102 92 25 79 273
22 3 385⁄8 123⁄4 435⁄8 41⁄4 5 4 37 ⁄ 8 1 33 ⁄ 8 811
22 M80x6 981 324 1108 108 127 102 98 25 86 368

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold
Load, Movement and Direction of Movement (from the Cold/Installed position to
the Hot/Operating position), and Hanger Identification Number (if any). Specify
any other optional feature(s) as necessary.
Pins for attachment to the structure are not included with the unit and must be
ordered separately as a Figure 291, shown on page 8 of this catalog. For ordering
specify Figure Number, pin diameter and finish.
For corrosion resistant units specify the Figure Number with the letter prefix “C”,
e.g. C910
For metric units specify the Figure Number with the letter prefix “M” e.g. M910 or
MC910.
DIMENSIONS TEMPERATURE LOADS WEIGHT
INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

19
VARIABLE SPRING SUPPORTS

SERIES 920 TYPE D

A ROD CASE CASE ROD HGT OF APPROX.
HANGER SIZE LENGTH DIA. TAKEOUT SPACER WEIGHT
ROD, NUTS,
SIZE A B C E M EACH
AND WASHER
000 1⁄ 2 8 4 123⁄4 4 6
NOT FURNISHED
000 M12 203 102 324 102 2.7
M
00 1⁄ 2 91 ⁄ 4 4 14 4 7
00 M12 235 102 356 102 3.2
0 1⁄ 2 97 ⁄ 8 4 145⁄8 4 8
0 M12 251 102 371 102 3.6
E 1 1⁄ 2 97 ⁄ 8 4 145⁄8 4 9
1 M12 251 102 371 102 4.1
2 1⁄ 2 97 ⁄ 8 4 145⁄8 4 10
B 2 M12 251 102 371 102 4.5
3 1⁄ 2 10 59⁄16 143⁄4 4 14
3 M12 254 141 375 102 6.4
4 1⁄ 2 10 59⁄16 143⁄4 4 16
4 M12 254 141 375 102 7.3
5 1⁄ 2 10 59⁄16 143⁄4 4 19
5 M12 254 141 375 102 8.6
6 5⁄ 8 113⁄4 65 ⁄ 8 1611⁄16 4 25
6 M16 298 168 424 102 11
7 5⁄ 8 113⁄4 65 ⁄ 8 1611⁄16 4 25
7 M16 298 168 424 102 11
8 5⁄ 8 113⁄4 65 ⁄ 8 1611⁄16 4 29
8 M16 298 168 424 102 13
9 3⁄ 4 121⁄2 85 ⁄ 8 18 43⁄8 50
C 9 M20 318 219 457 111 23
10 3⁄ 4 133⁄4 85 ⁄ 8 191⁄4 43⁄8 54
10 M20 349 219 489 111 24
11 3⁄ 4 121⁄2 85 ⁄ 8 18 43⁄8 64
11 M20 318 219 457 111 29
12 1 13 85⁄8 191⁄8 45⁄8 70
12 M24 330 219 486 117 32
13 1 155⁄8 85 ⁄ 8 213⁄4 45⁄8 79
13 M24 397 219 552 117 36
14 11⁄4 161⁄2 85 ⁄ 8 233⁄8 5 84
14 M30 419 219 594 127 38
15 11⁄4 161⁄2 85 ⁄ 8 231⁄4 47⁄8 111
15 M30 419 219 591 124 50
16 11⁄2 19 85 ⁄ 8 261⁄2 51⁄4 142
16 M36 483 219 673 133 64
17 13⁄4 211⁄4 85 ⁄ 8 293⁄8 51⁄2 190
17 M36 540 219 746 140 86
18 2 203⁄4 123⁄4 291⁄2 53⁄4 311
18 M48 527 324 749 146 141
19 21⁄4 231⁄2 123⁄4 327⁄8 6 348
19 M56 597 324 835 152 158
20 21⁄2 291⁄4 123⁄4 39 6 487
20 M64 743 324 991 152 221
21 23⁄4 323⁄8 123⁄4 423⁄4 61⁄4 534
21 M72 822 324 1086 159 242
22 3 385⁄8 123⁄4 481⁄8 5 714
22 M80x6 981 324 1222 127 324

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot

Load, Cold Load, Movement and Direction of Movement (from the
Cold/Installed position to the Hot/Operating position), and Hanger
Identification Number (if any). Specify any other optional feature(s)
as necessary.
For corrosion resistant units specify the Figure Number with the letter
prefix “C”, e.g. C920
For metric units specify the Figure Number with the letter prefix “M”
e.g. M920 or MC920.

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

20
 VARIABLE SPRING SUPPORTS

SERIES 920 TYPE E

ROD CASE CASE MIN. THD. APPROX.
HANGER SIZE LENGTH DIAMETER ENGM'T WEIGHT
C SIZE A B C F EACH
000 1⁄ 2 8 4 7⁄ 8 6
MUST BE
TACK WELDED
000 M12 203 102 22 2.7
BY CUSTOMER R.H. AND L.H.
00 1⁄ 2 91⁄4 4 7⁄ 8 7
ROD AND NUT 00 M12 235 102 22 3.2
NOT FURNISHED, 0 1⁄ 2 97⁄8 4 7⁄ 8 8
LENGTH TO SUIT 0 M12 251 102 22 3.6
CUSTOMER 1 1⁄ 2 97⁄8 4 7⁄ 8 9
B REQUIREMENT
1 M12 251 102 22 4.1
2 1⁄ 2 97⁄8 4 7⁄ 8 10
2 M12 251 102 22 4.5
3 1⁄ 2 10 59⁄16 7⁄ 8 14
3 M12 254 141 22 6.4
4 1⁄ 2 10 59⁄16 7⁄ 8 16
4 M12 254 141 22 7.3
F 5 1⁄ 2 10 59⁄16 7⁄ 8 19
5 M12 254 141 22 8.6
6 5⁄ 8 113⁄4 65 ⁄ 8 11 ⁄ 8 25
6 M16 298 168 29 11
L.H.
THD.
7 5⁄ 8 113⁄4 65 ⁄ 8 11 ⁄ 8 25
7 M16 298 168 29 11
6"
8 5⁄ 8 113⁄4 65 ⁄ 8 11 ⁄ 8 29
8 M16 298 168 29 13
9 3⁄ 4 121⁄2 85 ⁄ 8 11 ⁄ 4 50
MUST BE 9 M20 318 219 32 23
TACK WELDED
BY CUSTOMER 10 3⁄ 4 133⁄4 85 ⁄ 8 11 ⁄ 4 54
10 M20 349 219 32 24
11 3⁄ 4 121⁄2 85 ⁄ 8 11 ⁄ 4 64
A F 11 M20 318 219 32 29
TURNBUCKLE 12 1 13 85⁄8 15 ⁄ 8 70
IS FURNISHED 12 M24 330 219 41 32
13 1 155⁄8 85 ⁄ 8 15 ⁄ 8 79
13 M24 397 219 41 36
14 11⁄4 161⁄2 85 ⁄ 8 13 ⁄ 4 84
14 M30 419 219 44 38
15 11⁄4 161⁄2 85 ⁄ 8 13 ⁄ 4 111
15 M30 419 219 44 50
16 11⁄2 19 85⁄8 2 142
16 M36 483 219 51 64
17 13⁄4 211⁄4 85 ⁄ 8 25 ⁄ 8 190
17 M36 540 219 67 86
18 2 203⁄4 123⁄4 27 ⁄ 8 311
18 M48 527 324 73 141
19 21⁄4 231⁄2 123⁄4 31 ⁄ 2 348
19 M56 597 324 89 158
20 21⁄2 291⁄4 123⁄4 37 ⁄ 8 487
20 M64 743 324 98 221
21 23⁄4 323⁄8 123⁄4 41 ⁄ 4 534
21 M72 822 324 108 242
22 3 385⁄8 123⁄4 41 ⁄ 4 714
22 M80x6 981 324 108 324

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot

Load, Cold Load, Movement and Direction of Movement (from the
Cold/Installed position to the Hot/Operating position), and Hanger
Identification Number (if any). Specify any other optional feature(s)
as necessary.
For corrosion resistant units specify the Figure Number with the letter
prefix “C”, e.g. C920
For metric units specify the Figure Number with the letter prefix “M”
e.g. M920 or MC920.

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

21
VARIABLE SPRING SUPPORTS

SERIES 920 - TYPE F

CASE CASE BOTTOM BOLT OVERALL LOAD LOAD APPROX.
LNGTH DIA. FLANGE BOTTOM CIRCLE LENGTH X ** FLANGE FLANGE WEIGHT
SIZE B C BOLT DIA. FLANGE MIN. MAX. MIN. MAX. DIA. THICK. EACH
IN.
0
1/2
1
LBS.

000 61⁄4 4 5⁄ 8 1⁄ 4 x 71⁄2 x 71⁄2 7 9 3⁄ 4 73⁄4 93⁄4 37⁄8 1⁄ 4 11

1 1/2
2
000 159 102 16 6 x 190 x 190 178 248 197 248 98 6 5
1⁄ 4 x 71⁄ 2 x 71⁄ 2
2 1/2
S.R.

TYPE

HOT
SIZE

COLD
LBS./IN.

00 71⁄2 4 5⁄ 8 7 9 3⁄ 4 9 11 3 7⁄ 8 1⁄ 4 12
00 191 102 16 6 x 190 x 190 178 248 229 279 98 6 5.4
MK. #

SERIAL

X
NUMBER

FIGURE NO.920

B 0 63⁄4 4 5⁄ 8 1⁄ 4 x 71⁄ 2 x 71⁄ 2 7 9 3⁄ 4 81⁄4 101⁄4 37⁄8 1⁄ 4 15

0 171 102 16 6 x 190 x 190 178 248 210 260 98 6 6.8
1 75⁄8 4 5⁄ 8 1⁄ 4 x 1⁄ 2 x 71⁄ 2 7 9 3⁄ 4 91⁄8 111⁄8 37⁄8 1⁄ 4 15
1 194 102 16 6 x 190 x 190 178 248 232 283 98 6 6.8
2 83⁄8 4 5⁄ 8 1⁄ 4 x 71⁄ 2 x 71⁄ 2 7 9 3⁄ 4 97⁄8 117⁄8 37⁄8 1⁄ 4 16
2 213 102 16 6 x 190 x 190 178 248 251 302 98 6 7.3
3 75⁄8 59⁄16 3⁄ 4 1⁄ 4 x 71⁄ 2 x 71⁄ 2 73⁄4 93⁄4 91⁄8 111⁄8 53⁄8 1⁄ 4 23
C
3 194 141 19 6 x 190 x 190 197 248 232 283 137 6 10
4 81⁄4 59⁄16 3⁄ 4 1⁄ 4 x 71⁄ 2 x 71⁄ 2 73⁄4 93⁄4 93⁄4 113⁄4 53⁄8 1⁄ 4 26
4 210 141 19 6 x 190 x 190 197 248 248 298 137 6 12
5 87⁄8 59⁄16 3⁄ 4 1⁄ 4 x 71⁄ 2 x 71⁄ 2 73⁄4 93⁄4 103⁄8 123⁄8 53⁄8 1⁄ 4 27
5 225 141 19 6 x 190 x 190 197 248 264 314 137 6 12
6 83⁄8 65⁄8 3⁄ 4 3⁄ 8 x 9 x 9 93⁄16 111⁄2 101⁄8 121⁄8 63⁄8 1⁄ 4 42
6 213 168 19 10 x 229 x 229 233 292 257 308 162 6 19
LE

7 93⁄4 65⁄8 3⁄ 4 3⁄ 8 x 9 x 9 93⁄16 111⁄2 115⁄8 135⁄8 63⁄8 1⁄ 4 42

C

7 248 168 19 10 x 229 x 229 233 292 295 346 162 6 19

IR
C

8 101⁄4 65⁄8 3⁄ 4 3⁄ 8 x 9 x 9 93⁄16 111⁄2 12 14 63⁄8 1⁄ 4 46

LT

8 260 168 19 10 x 229 x 229 233 292 305 356 162 6 21

BO

9 101⁄2 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 121⁄2 141⁄2 83⁄8 1⁄ 2 83

9 267 219 19 13 x 337 x 337 268 413 318 368 213 13 38
10 113⁄4 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 133⁄4 153⁄4 83⁄8 1⁄ 2 88
10 298 219 19 13 x 337 x 337 268 413 349 400 213 13 40
11 95⁄8 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 115⁄8 135⁄8 83⁄8 1⁄ 2 93
11 244 219 19 13 x 337 x 337 268 413 295 346 213 13 42
12 101⁄8 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 121⁄8 141⁄8 83⁄8 1⁄ 2 100
12 257 219 19 13 x 337 x 337 268 413 308 359 213 13 45
13 123⁄4 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 143⁄4 163⁄4 83⁄8 1⁄ 2 104
13 324 219 19 13 x 337 x 337 268 413 375 425 213 13 47
14 127⁄8 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 147⁄8 167⁄8 83⁄8 1⁄ 2 110
14 327 219 19 13 x 337 x 337 268 413 378 429 213 13 50
15 131⁄8 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 151⁄8 171⁄8 83⁄8 1⁄ 2 134
15 333 219 19 13 x 337 x 337 268 413 384 435 213 13 61
16 151⁄2 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 171⁄2 191⁄2 83⁄8 1⁄ 2 162
16 394 219 19 13 x 337 x 337 268 413 445 495 213 13 73
17 171⁄2 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 191⁄2 211⁄2 83⁄8 1⁄ 2 203
17 445 219 19 13 x 337 x 337 268 413 495 546 213 13 92
18 173⁄8 123⁄4 3⁄ 4 5⁄ 8 x 171⁄ 4 x 171⁄ 4 153⁄4 21 191⁄2 211⁄2 121⁄2 1⁄ 2 337
18 441 324 19 16 x 438 x 438 400 533 495 546 318 13 153
19 195⁄8 123⁄4 3⁄ 4 5⁄ 8 x 171⁄ 4 x 171⁄ 4 153⁄4 21 213⁄4 233⁄4 121⁄2 1⁄ 2 366
19 498 324 19 16 x 438 x 438 400 533 552 603 318 13 166
20 227⁄8 123⁄4 3⁄ 4 5⁄ 8 x 171⁄ 4 x 171⁄ 4 153⁄4 21 25 27 121⁄2 1⁄ 2 485
20 581 324 19 16 x 438 x 438 400 533 635 686 318 13 220
21 25 123⁄4 3⁄ 4 5⁄ 8 x 171⁄ 4 x 171⁄ 4 153⁄4 21 273⁄4 293⁄4 121⁄2 1⁄ 2 513
21 635 324 19 16 x 438 x 438 400 533 705 756 318 13 233
22 311⁄2 123⁄4 3⁄ 4 5⁄ 8 x 171⁄ 4 x 171⁄ 4 153⁄4 21 341⁄8 361⁄8 121⁄2 1⁄ 2 675
22 800 324 19 16 x 438 x 438 400 533 867 918 318 13 306
** The Installed Height should be the mid-point between the Maximum and Minimum Overall
Height "X" , plus the thickness of the Load Flange, and plus any DOWN piping movement
when applicable.

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load,
Movement and Direction of Movement (from the Cold/Installed position to the
Hot/Operating position), Dimension X (Installed Height) and Hanger Identification
Number (if any). Specify any other optional feature(s) as necessary.
For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C920
For metric units specify the Figure Number with the letter prefix “M” e.g. M920 or MC920.

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

22
 VARIABLE SPRING SUPPORTS

C-C Rod Dimension as specified Ordering: Specify Figure Number (Travel

by customer Series), Type, Size, Total Load, Hot Load per
A F
spring, Cold Load per spring, Movement and
Direction of Movement (from the Cold/Installed
position to the Hot/Operating position), Center
E P to Center of Rods dimension and Hanger
FIGURE NO.920

COLD HOT
NUMBER
SERIAL

MK. #
FIGURE NO.920

COLD
NUMBER
SERIAL

HOT
MK. # Identification Number (if any). Specify any
LBS./IN.
SIZE TYPE

S.R.
W LBS./IN.
SIZE TYPE

S.R.

other optional feature(s) as necessary.

B 2 1/2 2 1/2
2 2

1 1/2
1
1 1/2
1
For corrosion resistant units specify the Figure
1/2 1/2

LBS.
0
IN.
0
LBS. IN. Number with the letter prefix “C”, e.g. C920
For metric units specify the Figure Number
C with the letter prefix “M” e.g. M920 or MC920.

FIGURE 920 - TYPE G

ROD CASE CASE ROD MIN. THD. CHANNEL APPROX.
HANGER SIZE LENGTH DIAMETER TAKEOUT ENGM'T CHANNEL MAX. SPACING WEIGHT
SIZE A B C E F SIZE C-C W P EACH
000 1⁄ 2 8 4 15⁄8 7⁄ 8 C3 x 4.1 24 5⁄ 8 11⁄2 24
000 M12 203 102 41 22 C75 x 6 610 16 38 11
00 1⁄ 2 91 ⁄ 4 4 13⁄8 7⁄ 8 C3 x 4.1 24 5⁄ 8 11⁄2 26
00 M12 2350 102 35 22 C75 x 6 610 16 38 12
0 1⁄ 2 97 ⁄ 8 4 13⁄8 7⁄ 8 C3 x 4.1 24 5⁄ 8 11⁄2 30
0 M12 251 102 35 22 C75 x 6 610 16 38 14
1 1⁄ 2 97 ⁄ 8 4 13⁄8 7⁄ 8 C3 x 4.1 24 5⁄ 8 11⁄2 30
1 M12 251 102 35 22 C75 x 6 610 16 38 14
2 1⁄ 2 97 ⁄ 8 4 13⁄8 7⁄ 8 C3 x 4.1 24 5⁄ 8 11⁄2 33
2 M12 251 102 35 22 C75 x 6 610 16 38 15
3 1⁄ 2 10 59⁄16 17⁄8 7⁄ 8 C3 x 4.1 30 3⁄ 4 2 41
3 M12 254 141 48 22 C75 x 6 762 19 51 19
4 1⁄ 2 10 59⁄16 17⁄8 7⁄ 8 C3 x 4.1 30 3⁄ 4 2 46
4 M12 254 141 48 22 C75 x 6 762 19 51 21
5 1⁄ 2 10 59⁄16 17⁄8 7⁄ 8 C3 x 4.1 30 3⁄ 4 2 51
5 M12 254 141 48 22 C75 x 6 762 19 51 23
6 5⁄ 8 113⁄4 65⁄8 113⁄16 11⁄8 C3 x 4.1 36 1 2 63
6 M16 298 168 46 29 C75 x 6 914 25 51 29
7 5⁄ 8 113⁄4 65⁄8 113⁄16 11⁄8 C3 x 4.1 36 1 2 62
7 M16 298 168 46 29 C75 x 6 914 25 51 28
8 5⁄ 8 113⁄4 65⁄8 113⁄16 11⁄8 C3 x 4.1 36 1 2 71
8 M16 298 168 46 29 C75 x 6 914 25 51 32
9 3⁄ 4 121⁄2 85⁄8 27⁄8 11⁄4 C4 x 5.4 36 11⁄4 3 113
9 M20 318 219 73 32 C100 x 8 914 32 76 51
10 3⁄ 4 133⁄4 85⁄8 27⁄8 11⁄4 C4 x 5.4 36 11⁄4 3 123
10 M20 349 219 73 32 C100 x 8 914 32 76 56
11 3⁄ 4 121⁄2 85⁄8 27⁄8 11⁄4 C4 x 5.4 36 11⁄4 3 143
11 M20 318 219 73 32 C100 x 8 914 32 76 65
12 1 13 85⁄8 37⁄8 15⁄8 C5 x 6.7 36 11⁄2 4 161
12 M24 330 219 98 41 C130 x 10 914 38 102 73
13 1 155⁄8 85⁄8 37⁄8 15⁄8 C5 x 6.7 36 11⁄2 4 182
13 M24 397 219 98 41 C130 x 10 914 38 102 83
14 11⁄4 161⁄2 85⁄8 313⁄16 13⁄4 C5 x 6.7 33 11⁄2 4 191
14 M30 419 219 97 44 C130 x 10 838 38 102 87
15 11⁄4 161⁄2 85⁄8 313⁄16 13⁄4 C8 x 11.5 36 21 ⁄ 8 4 260
15 M30 419 219 97 44 C200 x 17 914 54 102 118
16 11⁄2 19 85⁄8 37⁄8 2 C8 x 11.5 36 21 ⁄ 8 4 327
16 M36 483 219 98 51 C200 x 17 914 54 102 148
17 13⁄4 211⁄4 85⁄8 35⁄8 25⁄8 C8 x 11.5 36 21 ⁄ 8 4 437
17 M42 540 219 92 67 C200 x 17 914 54 102 198
18 2 203⁄4 123⁄4 37⁄8 27⁄8 C12 x 20.7 42 23⁄8 4 691
18 M48 527 324 98 73 C130 x 31 1067 67 102 313
19 21⁄4 231⁄2 123⁄4 37⁄8 31⁄2 C12 x 20.7 42 25⁄8 4 778
19 M56 597 324 98 89 C130 x 31 1067 67 102 353
20 21⁄2 291⁄4 123⁄4 37⁄8 37⁄8 C12 x 20.7 40 25⁄8 4 1081
20 M64 743 324 98 98 C130 x 31 1016 67 102 490
21 23⁄4 323⁄8 123⁄4 37⁄8 41⁄4 C15 x 33.9 48 31⁄8 4 1216
21 M72 822 324 98 108 C380 x 50 1219 79 102 552
22 3 385⁄8 123⁄4 41⁄4 41⁄4 C15 x 33.9 48 33⁄8 4 1632
22 M80x6 981 324 108 108 C380 x 50 1219 86 102 740

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

23
VARIABLE SPRING SUPPORTS

SERIES 940 - TYPE A

MIN.
ROD CASE CASE ROD THD. ROD APPROX.
SIZE LGTH DIA. T’OUT ENGM'T ENGM'T WGT
SIZE A B C E F G EACH
G 0 1⁄ 2 141⁄4 4 141⁄8 7⁄ 8 7⁄ 8 16
A 0 M12 362 102 359 22 22 7.3
1 1⁄ 2 16 4 15 7⁄8 7⁄ 8 7⁄ 8 17
1 M12 406 102 403 22 22 7.7
2 1⁄ 2 171⁄2 4 173⁄8 7⁄ 8 7⁄ 8 19
2 M12 445 102 441 22 22 8.6
3 1⁄ 2 151⁄2 59⁄16 153⁄8 7⁄ 8 7⁄ 8 26
3 M12 394 141 391 22 22 12
4 1⁄ 2 17 59⁄16 16 7⁄8 7⁄ 8 7⁄ 8 31
4 M12 432 141 429 22 22 14
5 1⁄ 2 18 59⁄16 17 7⁄8 7⁄ 8 7⁄ 8 34
5 M12 457 141 454 22 22 15
6 5⁄ 8 183⁄8 65⁄8 181⁄4 11⁄8 11 ⁄ 8 45
E B 6 M16 467 168 464 29 29 20
7 5⁄ 8 20 65⁄8 20 11⁄8 11 ⁄ 8 44
7 M16 508 168 508 29 29 20
8 5⁄ 8 21 65⁄8 211⁄8 11⁄8 11 ⁄ 8 53
8 M16 533 168 537 29 29 24
9 3⁄ 4 21 85⁄8 207⁄8 11⁄4 11 ⁄ 4 87
9 M20 533 219 530 32 32 39
10 3⁄ 4 241⁄4 85⁄8 241⁄8 11⁄4 11 ⁄ 4 97
10 M20 616 219 613 32 32 44
11 3⁄ 4 191⁄2 85⁄8 193⁄8 11⁄4 11 ⁄ 4 115
11 M20 495 219 492 32 32 52
12 1 211⁄2 85⁄8 213⁄8 15⁄8 15 ⁄ 8 129
12 M24 546 219 543 41 41 59
13 1 27 85⁄8 267⁄8 15⁄8 15 ⁄ 8 146
F C 13 M24 686 219 683 41 41 66
14 11⁄4 273⁄4 85⁄8 271⁄2 13⁄4 13 ⁄ 4 156
14 M30 705 219 699 44 44 71
15 11⁄4 273⁄8 85⁄8 271⁄4 13⁄4 13 ⁄ 4 212
15 M30 695 219 692 44 44 96
16 11⁄2 325⁄8 85⁄8 321⁄2 2 2 280
16 M36 829 219 826 51 51 127
17 13⁄4 37 85⁄8 365⁄8 25⁄8 25 ⁄ 8 374
17 M42 940 219 930 67 67 170
18 2 361⁄2 123⁄4 363⁄8 27⁄8 27 ⁄ 8 570
18 M48 927 324 924 73 73 259
19 21⁄4 421⁄8 123⁄4 42 31⁄2 31 ⁄ 2 661
19 M56 1070 324 1067 89 89 300
20 21⁄2 491⁄2 123⁄4 493⁄8 37⁄8 37 ⁄ 8 943
20 M64 1257 324 1254 98 98 428
21 23⁄4 545⁄8 123⁄4 541⁄2 41⁄4 41 ⁄ 4 1036
21 M72 1387 324 1384 108 108 470
22 3 67 123⁄4 671⁄4 41⁄4 41 ⁄ 4 1423
22 M80x6 1702 324 1708 108 108 645

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot

Load, Cold Load, Movement and Direction of Movement (from the
Cold/Installed position to the Hot/Operating position), and Hanger
Identification Number (if any). Specify any other optional feature(s)
as necessary.
For corrosion resistant units specify the Figure Number with the letter
prefix “C”, e.g. C940
For metric units specify the Figure Number with the letter prefix “M”
e.g. M940 or MC940.

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

24
 VARIABLE SPRING SUPPORTS

FIGURE 940 TYPE B

MIN. HGT.
ROD CASE CASE ROD THD. OF LUG APPROX.
SIZE LGTH. DIA. T’OUT ENGM'T PIN HOLE WGT.
A SIZE A B C E F H R T DIA. EACH
T
0 1⁄ 2 141⁄4 4 155⁄8 7⁄ 8 11⁄2 11⁄4 1⁄ 4 11⁄ 16 16.
R
0 M12 362 102 397 22 38 32 6 17 7.3
H 1 1⁄ 2 16 4 173⁄8 7⁄ 8 11⁄2 11⁄4 1⁄ 4 11⁄ 16 17
A 1 M12 406 102 441 22 38 32 6 17 7.7
2 1⁄ 2 171⁄2 4 187⁄8 7⁄ 8 11⁄2 11⁄4 1⁄ 4 11⁄ 16 19
2 M12 445 102 479 22 38 32 6 17 8.6
3 1⁄ 2 151⁄2 59⁄16 167⁄8 7⁄ 8 11⁄2 11⁄4 1⁄ 4 11⁄ 16 26
3 M12 394 141 429 22 38 32 6 17 12
4 1⁄ 2 17 59⁄16 183⁄8 7⁄ 8 11⁄2 11⁄4 1⁄ 4 11⁄ 16 31
4 M12 432 141 467 22 38 32 6 17 14
5 1⁄ 2 18 59⁄16 193⁄8 7⁄ 8 11⁄2 11⁄4 1⁄ 4 11⁄ 16 34
5 M12 457 141 492 22 38 32 6 17 15
E 6 5⁄ 8 183⁄8 65 ⁄ 8 193⁄4 11 ⁄ 8 11⁄2 11⁄4 1⁄ 4 13⁄ 16 45
B
6 M16 467 168 502 29 38 32 6 21 20
7 5⁄ 8 20 65 ⁄ 8 211⁄2 11 ⁄ 8 11⁄2 11⁄4 1⁄ 4 13⁄ 16 44
7 M16 508 168 546 29 38 32 6 21 20
8 5⁄ 8 211⁄4 65 ⁄ 8 221⁄2 11 ⁄ 8 11⁄2 11⁄4 1⁄ 4 13⁄ 16 53
8 M16 540 168 572 29 38 32 6 21 24
9 3⁄ 4 21 85 ⁄ 8 223⁄8 11 ⁄ 4 11⁄2 11⁄4 3⁄ 8 15⁄ 16 87
9 M20 533 219 568 32 38 32 10 24 39
10 3⁄ 4 241⁄4 85 ⁄ 8 255⁄8 11 ⁄ 4 11⁄2 11⁄4 3⁄ 8 15⁄ 16 97
10 M20 616 219 651 32 38 32 10 24 44
11 3⁄ 4 191⁄2 85 ⁄ 8 207⁄8 11 ⁄ 4 11⁄2 11⁄4 3⁄ 8 15⁄ 16 115
11 M20 495 219 530 32 38 32 10 24 52
12 1 211⁄2 85 ⁄ 8 233⁄8 15 ⁄ 8 2 11⁄2 1⁄ 2 11⁄4 129
F A 12 M24 546 219 594 41 51 38 13 32 59
C 13 1 27 85⁄8 287⁄8 15 ⁄ 8 2 11⁄2 1⁄ 2 11⁄4 146
13 M24 686 219 733 41 51 38 13 32 66
14 11⁄4 273⁄4 85 ⁄ 8 301⁄2 13 ⁄ 4 3 2 5⁄ 8 11⁄2 156
14 M30 705 219 775 44 76 51 16 38 71
A-A
15 11⁄4 273⁄8 85 ⁄ 8 301⁄4 13 ⁄ 4 3 2 5⁄ 8 11⁄2 212
15 M30 695 219 768 44 76 51 16 38 96
16 11⁄2 325⁄8 85 ⁄ 8 351⁄2 2 3 21⁄2 3⁄ 4 13⁄4 280
16 M36 829 219 902 51 76 64 19 44 127
17 13⁄4 37 85 ⁄ 8 395⁄8 25 ⁄ 8 3 21⁄2 3⁄ 4 2 374
17 M42 940 219 1006 67 76 64 19 51 170
18 2 361⁄2 123⁄4 403⁄8 27 ⁄ 8 4 3 3⁄ 4 23⁄8 570
18 M48 927 324 1026 73 102 76 19 60 259
19 21⁄4 421⁄8 123⁄4 46 31⁄2 41⁄2 3 3⁄ 4 25⁄8 661
LUG HOLE 19 M56 1070 324 1168 89 114 76 19 67 300
DIAMETER 20 21⁄2 491⁄2 123⁄4 537⁄8 37 ⁄ 8 41⁄2 4 1 27 ⁄ 8 943
20 M64 1257 324 1368 98 114 102 25 73 428
21 23⁄4 545⁄8 123⁄4 59 41⁄4 41⁄2 4 1 31 ⁄ 8 1036
21 M72 1387 324 1499 108 114 102 25 79 470
22 3 67 123⁄4 721⁄4 41 ⁄ 4 5 4 1 33⁄8 1423
22 M80x6 1702 324 1835 108 127 102 25 86 645

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load,
Cold Load, Movement and Direction of Movement (from the Cold/Installed
position to the Hot/Operating position), and Hanger Identification Number
(if any). Specify any other optional feature(s) as necessary.
Pins for attachment to the structure are not included with the unit and must
be ordered separately as a Figure 291, shown on page 8 of this catalog. For
ordering specify Figure Number, pin diameter and finish.
For corrosion resistant units specify the Figure Number with the letter prefix
“C”, e.g. C910
For metric units specify the Figure Number with the letter prefix “M” e.g.
M910 or MC910.

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

25
VARIABLE SPRING SUPPORTS

SERIES 940 - TYPE C

MIN. HGT.
ROD CASE CASE ROD THD. OF LUG APPROX.
S SIZE LGTH. DIA. T’OUT ENGM'T PIN HOLE WGT
A
T
SIZE A B C E F H R S T DIA. EACH
0 1⁄ 2 141⁄4 4 155⁄8 7⁄ 8 11⁄2 11 ⁄ 4 11⁄4 1⁄ 4 11⁄ 16 16
R 0 M12 362 102 397 22 38 32 32 6 17 7.3
H 1 1⁄ 2 16 4 173⁄8 7⁄ 8 11⁄2 11 ⁄ 4 11⁄4 1⁄ 4 11⁄ 16 17
A 1 M12 406 102 441 22 38 32 32 6 17 7.7
2 1⁄ 2 171⁄2 4 187⁄8 7⁄ 8 11⁄2 11 ⁄ 4 11⁄4 1⁄ 4 11⁄ 16 19
2 M12 445 102 479 22 38 32 32 6 17 8.6
3 1⁄ 2 151⁄2 59⁄16 167⁄8 7⁄ 8 11⁄2 11 ⁄ 4 11⁄4 1⁄ 4 11⁄ 16 26
3 M12 394 141 429 22 38 32 32 6 17 12
4 1⁄ 2 17 59⁄16 183⁄8 7⁄ 8 11⁄2 11 ⁄ 4 11⁄4 1⁄ 4 11⁄ 16 31
4 M12 432 141 467 22 38 32 32 6 17 14
5 1⁄ 2 18 59⁄16 193⁄8 7⁄ 8 11⁄2 11 ⁄ 4 11⁄4 1⁄ 4 11⁄ 16 34
E 5 M12 457 141 492 22 38 32 32 6 17 15
B 6 5⁄ 8 183⁄8 65⁄8 193⁄4 11⁄8 11⁄2 11 ⁄ 4 11⁄4 1⁄ 4 13⁄ 16 45
6 M16 467 168 502 29 38 32 32 6 21 20
7 5⁄ 8 20 65⁄8 211⁄2 11⁄8 11⁄2 11 ⁄ 4 11⁄4 1⁄ 4 13⁄ 16 44
7 M16 508 168 546 29 38 32 32 6 21 20
8 5⁄ 8 21 65⁄8 211⁄2 11⁄8 11⁄2 11 ⁄ 4 11⁄4 1⁄ 4 13⁄ 16 53
8 M16 533 168 572 29 38 32 32 6 21 24
9 3⁄ 4 21 85⁄8 223⁄8 11⁄4 11⁄2 11 ⁄ 4 11⁄4 3⁄ 8 15⁄ 16 87
9 M20 533 219 568 32 38 32 32 10 24 39
10 3⁄ 4 241⁄4 85⁄8 255⁄8 11⁄4 11⁄2 11 ⁄ 4 11⁄4 3⁄ 8 15⁄ 16 97
10 M20 616 219 651 32 38 32 32 10 24 44
11 3⁄ 4 191⁄2 85⁄8 207⁄8 11⁄4 11⁄2 11 ⁄ 4 11⁄4 3⁄ 8 15⁄ 16 115
11 M20 495 219 530 32 38 32 32 10 24 52
F A 12 1 211⁄2 85⁄8 233⁄8 15⁄8 2 11 ⁄ 2 15⁄8 1⁄ 2 11 ⁄ 4 129
C 12 M24 546 219 594 41 51 38 41 13 32 59
13 1 27 85⁄8 287⁄8 15⁄8 2 11 ⁄ 2 15⁄8 1⁄ 2 11 ⁄ 4 146
13 M24 686 219 733 41 51 38 41 13 32 66
14 11⁄4 273⁄4 85⁄8 301⁄2 13⁄4 3 2 2 5⁄ 8 11 ⁄ 2 156
14 M30 705 219 775 44 76 51 51 16 38 710
A-A 15 11⁄4 273⁄8 85⁄8 301⁄4 13⁄4 3 2 2 5⁄ 8 11 ⁄ 2 212
15 M30 695 219 768 44 76 51 51 16 38 96
16 11⁄2 325⁄8 85⁄8 351⁄2 2 3 21 ⁄ 2 23⁄8 3⁄ 4 13 ⁄ 4 280
16 M36 829 219 902 51 76 64 60 19 44 127
17 13⁄4 37 85⁄8 395⁄8 25⁄8 3 21 ⁄ 2 23⁄8 3⁄ 4 2 374
17 M42 940 219 1006 67 76 64 60 19 51 170
18 2 361⁄2 123⁄4 403⁄8 27⁄8 4 3 27 ⁄ 8 3⁄ 4 23 ⁄ 8 570
18 M48 927 324 1026 73 102 76 73 19 60 259
19 21⁄4 421⁄8 123⁄4 46 31⁄2 41⁄2 3 31 ⁄ 8 3⁄ 4 25 ⁄ 8 661
19 M56 1070 324 1168 89 114 76 79 19 67 300
LUG HOLE 20 21⁄2 491⁄2 123⁄4 537⁄8 37⁄8 41⁄2 4 33 ⁄ 8 1 27⁄8 943
DIAMETER 20 M64 1257 324 1368 98 114 102 86 25 73 428
21 23⁄4 545⁄8 123⁄4 59 41⁄4 41⁄2 4 35 ⁄ 8 1 31⁄8 1036
21 M72 1387 324 1499 108 114 102 92 25 79 470
22 3 67 123⁄4 721⁄4 41⁄4 5 4 37 ⁄ 8 1 33⁄8 1423
22 M80x6 1702 324 1835 108 127 102 98 25 86 645

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold
Load, Movement and Direction of Movement (from the Cold/Installed position to
the Hot/Operating position), and Hanger Identification Number (if any). Specify
any other optional feature(s) as necessary.
Pins for attachment to the structure are not included with the unit and must be
ordered separately as a Figure 291, shown on page 8 of this catalog. For ordering
specify Figure Number, pin diameter and finish.
For corrosion resistant units specify the Figure Number with the letter prefix “C”,
e.g. C910
For metric units specify the Figure Number with the letter prefix “M” e.g. M910 or
MC910.

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

26
 VARIABLE SPRING SUPPORTS

SERIES 940 TYPE D

ROD CASE CASE HGT. OF ROD APPROX.
HANGER SIZE LENGTH DIA. SPACER TAKEOUT WEIGHT
A SIZE A B C E M EACH
ROD, NUTS, 0 1⁄ 2 141⁄4 4 221⁄2 71 ⁄ 2 15
AND WASHER 0 M12 362 102 572 191 6.8
NOT FURNISHED 1 1⁄ 2 16 4 241⁄4 71 ⁄ 2 15
M
1 M12 406 102 616 191 6.8
2 1⁄ 2 171⁄2 4 253⁄4 71 ⁄ 2 18
2 M12 445 102 654 191 8.2
3 1⁄ 2 151⁄2 59⁄16 233⁄4 71 ⁄ 2 24
3 M12 394 141 635 191 11
4 1⁄ 2 17 59⁄16 251⁄4 71 ⁄ 2 29
4 M12 432 141 641 191 13
E 5 1⁄ 2 18 59⁄16 261⁄4 71 ⁄ 2 32
5 M12 457 141 667 191 15
B 6 5⁄ 8 183⁄8 65 ⁄ 8 263⁄4 71 ⁄ 2 43
6 M16 467 168 679 191 20
7 5⁄ 8 20 65⁄8 281⁄4 71 ⁄ 2 42
7 M16 508 168 718 191 19
8 5⁄ 8 21 65⁄8 297⁄8 77 ⁄ 8 51
8 M16 533 168 759 200 23
9 3⁄ 4 21 85⁄8 30 77 ⁄ 8 84
9 M20 533 219 762 200 38
10 3⁄ 4 241⁄4 85 ⁄ 8 331⁄4 77 ⁄ 8 94
10 M20 616 219 845 200 43
11 3⁄ 4 191⁄2 85 ⁄ 8 281⁄2 77 ⁄ 8 96
11 M20 495 219 724 200 44
12 1 211⁄2 85 ⁄ 8 311⁄8 81 ⁄ 8 103
12 M24 546 219 791 206 47
C 13 1 27 85⁄8 365⁄8 81 ⁄ 8 139
13 M24 686 219 930 206 63
14 11⁄4 273⁄4 85 ⁄ 8 381⁄8 81 ⁄ 2 149
14 M30 705 219 968 216 68
15 11⁄4 273⁄8 85 ⁄ 8 375⁄8 83 ⁄ 8 200
15 M30 695 219 956 213 91
16 11⁄2 325⁄8 85 ⁄ 8 435⁄8 83 ⁄ 4 261
16 M36 829 219 1108 222 118
17 13⁄4 37 85⁄8 487⁄8 91 ⁄ 4 343
17 M42 940 219 1241 235 156
18 2 361⁄2 123⁄4 451⁄4 53 ⁄ 4 533
18 M48 927 324 1149 146 242
19 21⁄4 421⁄8 123⁄4 511⁄2 6 615
19 M56 1070 324 1308 152 279
20 21⁄2 491⁄2 123⁄4 591⁄4 6 850
20 M64 1257 324 1505 152 386
21 23⁄4 545⁄8 123⁄4 65 61 ⁄ 4 937
21 M72 1387 324 1651 159 425
22 3 67 123⁄4 761⁄2 5 1277
22 M80x6 1702 324 1943 127 579

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot

Load, Cold Load, Movement and Direction of Movement (from the
Cold/Installed position to the Hot/Operating position), and Hanger
Identification Number (if any). Specify any other optional feature(s)
as necessary.
For corrosion resistant units specify the Figure Number with the letter
prefix “C”, e.g. C940
For metric units specify the Figure Number with the letter prefix “M”
e.g. M940 or MC940.

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

27
VARIABLE SPRING SUPPORTS

SERIES 940 TYPE E

ROD CASE CASE MIN. THD. APPROX.
HANGER SIZE LENGTH DIAMETER ENGM'T WEIGHT
SIZE A B C F EACH
0 1⁄ 2 141⁄4 4 7⁄ 8 15
C 0 M12 362 102 22 6.8
1 1⁄ 2 16 4 7⁄ 8 15
MUST BE
1 M12 406 102 22 6.8
R.H. AND L.H. 2 1⁄ 2 171⁄2 4 7⁄ 8 18
TACK WELDED ROD AND
BY CUSTOMER NUT NOT
2 M12 445 102 22 8.2
FURNISHED, 3 1⁄ 2 151⁄2 59⁄16 7⁄ 8 24
LENGTH 3 M12 394 141 22 11
TO SUIT 4 1⁄ 2 17 59⁄16 7⁄ 8 29
CUSTOMER 4 M12 432 141 22 13
REQUIREMENT 5 1⁄ 2 18 59⁄16 7⁄ 8 32
B 5 M12 457 141 22 15
6 5⁄ 8 183⁄8 65 ⁄ 8 11⁄8 43
6 M16 467 168 29 20
7 5⁄ 8 20 65⁄8 11⁄8 42
7 M16 508 168 29 19
8 5⁄ 8 21 65⁄8 11⁄8 51
8 M16 533 168 29 23
9 3⁄ 4 21 85⁄8 11⁄4 84
9 M20 533 219 32 38
10 3⁄ 4 241⁄4 85 ⁄ 8 11⁄4 94
F 10 M20 616 219 32 43
11 3⁄ 4 191⁄2 85 ⁄ 8 11⁄4 96
L.H. 11 M20 495 219 32 44
THD. 12 1 211⁄2 85 ⁄ 8 15⁄8 103
12 M24 546 219 41 47
MUST BE 6" 13 1 27 85⁄8 15⁄8 139
TACK WELDED 13 M24 686 219 41 63
BY CUSTOMER 14 11⁄4 273⁄4 85 ⁄ 8 13⁄4 149
14 M30 705 219 44 68
15 11⁄4 273⁄8 85 ⁄ 8 13⁄4 200
A F
15 M30 695 219 44 91
16 11⁄2 325⁄8 85 ⁄ 8 2 261
TURNBUCKLE 16 M36 829 219 51 118
IS FURNISHED 17 13⁄4 37 8 ⁄8
5 25⁄8 343
17 M42 940 219 67 156
18 2 361⁄2 123⁄4 27⁄8 533
18 M48 927 324 73 242
19 21⁄4 421⁄8 123⁄4 31⁄2 615
19 M56 1070 324 89 279
20 21⁄2 491⁄2 123⁄4 37⁄8 850
20 M64 1257 324 98 386
21 23⁄4 545⁄8 123⁄4 41⁄4 937
21 M72 1387 324 108 425
22 3 67 123⁄4 41⁄4 1277
22 M80X6 1702 324 108 579

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot

Load, Cold Load, Movement and Direction of Movement (from the
Cold/Installed position to the Hot/Operating position), and Hanger
Identification Number (if any). Specify any other optional feature(s) as
necessary.
For corrosion resistant units specify the Figure Number with the letter
prefix “C”, e.g. C940
For metric units specify the Figure Number with the letter prefix “M”
e.g. M940 or MC940.

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

28
 VARIABLE SPRING SUPPORTS

SERIES 940 - TYPE F

CASE CASE BOTTOM BOLT OVERALL LOAD LOAD APPROX.
LNGTH. DIA. FLANGE BOTTOM CIRCLE LNGTH. X ** FLANGE FLANGE WGT.
SIZE B C BOLT DIA. FLANGE MIN. MAX. MIN. MAX. DIA. THICK. EACH
0 123⁄4 4 5⁄ 8 1⁄ 4 x 71⁄2 x 71⁄2 7 93⁄4 141⁄4 161⁄4 37⁄8 1⁄ 4 23
0 324 102 16 6 x 191 x 191 178 248 362 413 98 6 10
IN.
0
1/2
LBS.

1 141⁄2 4 5⁄ 8 1⁄ 4 x 71⁄ 2 x 71⁄ 2 7 93⁄4 16 18 37⁄8 1⁄ 4 23

1
1 1/2
2 1 368 102 16 6 x 191 x 191 178 248 406 457 98 6 10
1⁄ 4 x 71⁄ 2 x 71⁄ 2
2 1/2
3
3 1/2
2 16 4 5⁄ 8 7 93⁄4 171⁄2 191⁄2 37⁄8 1⁄ 4 26
4
4 1/2
5
2 406 102 16 6 x 191 x 191 178 248 445 495 98 6 12
S.R.

TYPE

HOT
SIZE
LBS./IN.

COLD
3 141⁄8 59⁄16 3⁄ 4 1⁄ 4 x 71⁄ 2 x 71⁄ 2 73⁄4 93⁄4 155⁄8 175⁄8 53⁄8 1⁄ 4 38
3 359 141 19 6 x 191 x 191 197 248 397 448 137 6 17
MK.#

SERIAL
NUMBER

FIGURE NO. 940

4 151⁄2 59⁄16 3⁄ 4 1⁄ 4 x 71⁄ 2 x 71⁄ 2 73⁄4 93⁄4 167⁄8 18 53⁄8 1⁄ 4 43

X B 4 394 141 19 6 x 191 x 191 197 248 429 457 137 6 20
5 167⁄8 59⁄16 3⁄ 4 1⁄ 4 x 71⁄ 2 x 71⁄ 2 73⁄4 93⁄4 181⁄4 203⁄8 53⁄8 1⁄ 4 46
5 429 141 19 6 x 191 x 191 197 248 464 518 137 6 21
6 165⁄8 65⁄8 3⁄ 4 3⁄ 8 x 9 x 9 91⁄4 101⁄2 183⁄8 203⁄8 53⁄8 1⁄ 4 62
6 422 168 19 10 x 229 x 229 235 267 467 518 137 6 28
7 181⁄2 65⁄8 3⁄ 4 3⁄ 8 x 9 x 9 91⁄4 101⁄2 203⁄8 221⁄4 63⁄8 1⁄ 4 61
7 470 168 19 10 x 229 x 229 235 267 518 565 162 6 28
8 191⁄2 65⁄8 3⁄ 4 3⁄ 8 x 9 x 9 91⁄4 101⁄2 211⁄4 231⁄4 63⁄8 1⁄ 4 70
8 495 168 19 10 x 229 x 229 235 267 540 591 162 6 32
9 195⁄8 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 213⁄4 235⁄8 83⁄8 1⁄ 2 120
C
9 498 219 19 13 x 337 x 337 268 413 552 600 213 13 54
10 221⁄8 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 241⁄4 261⁄8 83⁄8 1⁄ 2 131
10 562 219 19 13 x 337 x 337 268 413 616 664 213 13 59
11 173⁄4 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 197⁄8 213⁄4 83⁄8 1⁄ 2 142
11 451 219 19 13 x 337 x 337 268 413 505 552 213 13 64
12 19 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 211⁄8 23 83⁄8 1⁄ 2 156
12 483 219 19 13 x 337 x 337 268 413 537 584 213 13 71
LE

13 241⁄8 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 261⁄4 281⁄8 83⁄8 1⁄ 2 166
C
IR

13 613 219 19 13 x 337 x 337 268 413 667 714 213 13 75

C
LT

14 243⁄8 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 261⁄2 283⁄8 83⁄8 1⁄ 2 175
BO

14 619 219 19 13 x 337 x 337 268 413 673 721 213 13 79

15 241⁄2 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 265⁄8 281⁄2 83⁄8 1⁄ 2 224
15 622 219 19 13 x 337 x 337 268 413 676 724 213 13 102
16 291⁄8 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 311⁄4 331⁄8 83⁄8 1⁄ 2 281
16 740 219 19 13 x 337 x 337 268 413 794 841 213 13 127
17 331⁄4 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 353⁄8 371⁄4 83⁄8 1⁄ 2 378
17 845 219 19 13 x 337 x 337 268 413 899 946 213 13 171
18 321⁄8 123⁄4 3⁄ 4 5⁄ 8 x 171⁄ 4 x 171⁄ 4 153⁄4 21 341⁄8 361⁄4 121⁄2 1⁄ 2 562
18 816 324 19 16 x 438 x 438 400 533 867 921 318 13 255
19 365⁄8 123⁄4 3⁄ 4 5⁄ 8 x 171⁄ 4 x 171⁄ 4 153⁄4 21 385⁄8 403⁄4 121⁄2 1⁄ 2 617
19 930 324 19 16 x 438 x 438 400 533 981 1035 318 13 280
20 431⁄8 123⁄4 3⁄ 4 5⁄ 8 x 171⁄ 4 x 171⁄ 4 153⁄4 21 46 48 121⁄2 1⁄ 2 855
20 1095 324 19 16 x 438 x 438 400 533 1168 1219 318 13 388
21 481⁄2 123⁄4 3⁄ 4 5⁄ 8 x 171⁄ 4 x 171⁄ 4 153⁄4 21 505⁄8 525⁄8 121⁄2 1⁄ 2 910
21 1232 324 19 16 x 438 x 438 400 533 1286 1337 318 13 413
22 597⁄8 123⁄4 3⁄ 4 5⁄ 8 x 171⁄ 4 x 171⁄ 4 153⁄4 21 623⁄4 643⁄4 121⁄2 1⁄ 2 1231
22 1521 324 19 16 x 438 x 438 400 533 1594 1645 318 13 558

** The Installed Height should be the mid-point between the Maximum and Minimum Overall
Height "X" , plus the thickness of the Load Flange, and plus any DOWN piping movement
when applicable.

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load,
Movement and Direction of Movement (from the Cold/Installed position to the
Hot/Operating position), Dimension X (Installed Height) and Hanger Identification
Number (if any). Specify any other optional feature(s) as necessary.
For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C940
For metric units specify the Figure Number with the letter prefix “M” e.g. M940 or MC940.

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

29
VARIABLE SPRING SUPPORTS

C-C Rod Dimension

A F as specified
by customer
Ordering: Specify Figure Number (Travel
E Series), Type, Size, Total Load, Hot Load per
P
spring, Cold Load per spring, Movement and
W Direction of Movement (from the Cold/
Installed position to the Hot/Operating posi-
tion), Center to Center of Rods dimension and
B
FIGURE NO. 940

COLD
NUMBER
SERIAL

MK.#

HOT
FIGURE NO. 940

COLD
NUMBER
SERIAL

MK.#

HOT
Hanger Identification Number (if any). Specify
any other optional feature(s) as necessary.
SIZE TYPE SIZE TYPE

LBS./IN. S.R. LBS./IN. S.R.

5 5
4 1/2 4 1/2

3 1/2
4

3
4

3 1/2
3
For corrosion resistant units specify the Figure
2 1/2

1 1/2
2 2
2 1/2

1 1/2
Number with the letter prefix “C”, e.g. C940
1 1

LBS.
1/2
0
IN. IN.
1/2
0
LBS. For metric units specify the Figure Number
with the letter prefix “M” e.g. M940 or MC940.
C

FIGURE 940 TYPE G

ROD CASE CASE ROD MIN. THD. CHANNEL APPROX.
HANGER SIZE LENGTH DIAMETER TAKEOUT ENGM'T CHANNEL MAX. SPACING WEIGHT
SIZE A B C E F SIZE C-C W P EACH
0 1⁄ 2 141⁄4 4 13⁄8 7⁄ 8 C3 x 4.1 24 5⁄ 8 11 ⁄ 2 42
0 M12 362 102 35 22 C75 x 6 610 16 38 19
1 1⁄ 2 16 4 13⁄8 7⁄ 8 C3 x 4.1 24 5⁄ 8 11 ⁄ 2 43
1 M12 406 102 35 22 C75 x 6 610 16 38 20
2 1⁄ 2 171⁄2 4 13⁄8 7⁄ 8 C3 x 4.1 24 5⁄ 8 11 ⁄ 2 48
2 M12 445 102 35 22 C75 x 6 610 16 38 22
3 1⁄ 2 151⁄2 59⁄16 17 ⁄ 8 7⁄ 8 C3 x 4.1 30 3⁄ 4 2 61
3 M12 394 141 48 22 C75 x 6 762 19 51 28
4 1⁄ 2 17 59⁄16 17 ⁄ 8 7⁄ 8 C3 x 4.1 30 3⁄ 4 2 71
4 M12 432 141 48 22 C75 x 6 762 19 51 32
5 1⁄ 2 18 59⁄16 17 ⁄ 8 7⁄ 8 C3 x 4.1 30 3⁄ 4 2 77
5 M12 457 141 48 22 C75 x 6 762 19 51 35
6 5⁄ 8 183⁄8 65⁄8 17 ⁄ 8 11⁄8 C3 x 4.1 36 1 2 100
6 M16 467 168 48 29 C75 x 6 914 25 51 45
7 5⁄ 8 20 65⁄8 17 ⁄ 8 11⁄8 C3 x 4.1 36 1 2 98
7 M16 508 168 48 29 C75 x 6 914 25 51 44
8 5⁄ 8 21 65⁄8 17 ⁄ 8 11⁄8 C3 x 4.1 36 1 2 116
8 M16 533 168 48 29 C75 x 6 914 25 51 53
9 3⁄ 4 21 85⁄8 27 ⁄ 8 11⁄4 C4 x 5.4 36 11⁄4 3 184
9 M20 533 219 73 32 C100 x 8 914 32 76 83
10 3⁄ 4 241⁄4 85⁄8 27 ⁄ 8 11⁄4 C4 x 5.4 36 11⁄4 3 204
10 M20 616 219 73 32 C100 x 8 914 32 76 93
11 3⁄ 4 191⁄2 85⁄8 27 ⁄ 8 11⁄4 C4 x 5.4 36 11⁄4 3 241
11 M20 495 219 73 32 C100 x 8 914 32 76 109
12 1 211⁄2 85⁄8 37 ⁄ 8 15⁄8 C5 x 6.7 36 11⁄2 4 272
12 M24 546 219 98 41 C130 x 10 914 38 102 123
13 1 27 85⁄8 37 ⁄ 8 15⁄8 C5 x 6.7 36 11⁄2 4 304
13 M24 686 219 98 41 C130 x 10 914 38 102 138
14 11⁄4 273⁄4 85⁄8 37 ⁄ 8 13⁄4 C5 x 6.7 36 11⁄2 4 324
14 M30 705 219 98 44 C130 x 10 914 38 102 147
15 11⁄4 273⁄8 85⁄8 37 ⁄ 8 13⁄4 C8 x 11.5 36 21 ⁄ 8 4 445
15 M30 6952 219 98 44 C200 x 17 914 54 102 202
16 11⁄2 325⁄8 85⁄8 37 ⁄ 8 2 C8 x 11.5 36 21 ⁄ 8 4 573
16 M36 829 219 98 51 C200 x 17 914 54 102 260
17 13⁄4 37 85⁄8 35 ⁄ 8 25⁄8 C8 x 11.5 36 21 ⁄ 8 4 762
17 M42 940 219 92 67 C200 x 17 914 54 102 346
18 2 361⁄2 123⁄4 37 ⁄ 8 27⁄8 C12 x 20.7 42 23⁄8 4 1155
18 M48 927 324 98 73 C130 x 31 1067 60 102 524
19 21⁄4 421⁄8 123⁄4 37 ⁄ 8 31⁄2 C12 x 20.7 42 25⁄8 4 1336
19 M56 1070 324 98 89 C130 x 31 1067 67 102 606
20 21⁄2 491⁄2 123⁄4 37 ⁄ 8 37⁄8 C12 x 20.7 40 27⁄8 4 1874
20 M64 1257 324 98 98 C130 x 31 1016 73 102 850
21 23⁄4 545⁄8 123⁄4 37 ⁄ 8 41⁄4 C15 x 33.9 48 31⁄8 4 2086
21 M72 1387 324 98 108 C380 x 50 1219 79 102 946
22 3 67 123⁄4 41 ⁄ 4 41⁄4 C15 x 33.9 48 33⁄8 4 2856
22 M80x6 1702 324 108 108 C380 x 50 1219 86 102 1295

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

30
 VARIABLE SPRING SUPPORTS

SERIES 960 - TYPE A

ROD CASE CASE ROD MIN. THD. ROD APPRX.
SIZE LNGTH DIA. T’OUT ENGM'T ENGM'T WGT.
SIZE A B C E F G EACH
0 1⁄ 2 201⁄2 4 203⁄8 7⁄ 8 7⁄ 8 22
0 M12 521 102 518 22 22 10
G A 1 1⁄ 2 231⁄8 4 23 7⁄ 8 7⁄ 8 23
1 M12 587 102 584 22 22 10
2 1⁄ 2 253⁄8 4 251⁄4 7⁄ 8 7⁄ 8 26
2 M12 645 102 641 22 22 12
0
3 1⁄ 2 225⁄8 59⁄16 221⁄2 7⁄ 8 7⁄ 8 35
1 1/2
3 M12 575 141 572 22 22 16
4 1⁄ 2 251⁄2 59⁄16 253⁄8 7⁄ 8 7⁄ 8 43
3 4 M12 648 141 645 22 22 20
5 1⁄ 2 26 59⁄16 257⁄8 7⁄ 8 7⁄ 8 48
4 1/2

5 M12 660 141 657 22 22 22

6
6 5⁄ 8 26 65⁄8 253⁄4 11⁄8 11 ⁄ 8 63
6 M16 660 168 654 29 29 29
LD LBS DEFL IN
7 1/2
7 5⁄ 8 29 65⁄8 283⁄4 11⁄8 11 ⁄ 8 64
FIG. NO. SIZE

CALIBRATED LOAD
TYPE

TRAVEL
7 M16 737 168 730 29 29 29
MARK NUMBER SERIAL NUMBER
8 5⁄ 8 301⁄2 65⁄8 301⁄4 11⁄8 11 ⁄ 8 75
8 M16 775 168 768 29 29 34
9 3⁄ 4 287⁄8 85⁄8 283⁄4 11⁄4 11 ⁄ 4 123
E B
9 M20 733 219 730 32 32 56
10 3⁄ 4 341⁄2 85⁄8 343⁄8 11⁄4 11 ⁄ 4 139
10 M20 876 219 873 32 32 63
11 3⁄ 4 28 85⁄8 277⁄8 11⁄4 11 ⁄ 4 163
11 M20 711 219 708 32 32 74
12 1 301⁄2 85⁄8 303⁄8 15⁄8 15 ⁄ 8 185
12 M24 775 219 772 41 41 84
13 1 381⁄8 85⁄8 38 15⁄8 15 ⁄ 8 210
13 M24 968 219 965 41 41 95
14 11⁄4 383⁄4 85⁄8 381⁄2 13⁄4 15 ⁄ 8 224
14 M30 984 219 978 44 41 102
15 11⁄4 381⁄2 85⁄8 381⁄4 13⁄4 2 300
15 M30 978 219 972 44 51 136
16 11⁄2 463⁄8 85⁄8 461⁄4 2 2 403
16 M36 1178 219 1175 51 51 183
17 13⁄4 503⁄4 85⁄8 503⁄8 25⁄8 25 ⁄ 8 535
17 M42 1289 219 1280 67 67 243
18 2 51 123⁄4 507⁄8 27⁄8 27 ⁄ 8 783
F C 18 M48 1295 324 1292 73 73 355
19 21⁄4 583⁄4 123⁄4 587⁄8 31⁄2 31 ⁄ 2 929
19 M56 1492 324 1495 89 89 421
20 21⁄2 693⁄4 123⁄4 695⁄8 37⁄8 37 ⁄ 8 1342
20 M64 1772 324 1768 98 98 609
21 23⁄4 771⁄2 123⁄4 773⁄8 41⁄4 41⁄4 1842
21 M72 1969 324 1965 108 108 836
22 3 947⁄8 123⁄4 951⁄8 41⁄4 41 ⁄ 4 2350
22 M80x6 2410 324 2416 108 108 1066

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot

Load, Cold Load, Movement and Direction of Movement (from the
Cold/Installed position to the Hot/Operating position), and Hanger
Identification Number (if any). Specify any other optional feature(s)
as necessary.
For corrosion resistant units specify the Figure Number with the letter
prefix “C”, e.g. C960
For metric units specify the Figure Number with the letter prefix “M”
e.g. M960 or MC960.

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

31
VARIABLE SPRING SUPPORTS

FIGURE 960 TYPE B

MIN. HGT.
ROD CASE CASE ROD THD. OF LUG APPROX.
SIZE LGTH. DIA. T’OUT ENGM'T PIN HOLE WGT.
A SIZE A B C E F H R T DIA. EACH
T
0 1⁄ 2 201⁄2 4 217⁄8 7⁄ 8 11⁄2 11⁄4 1⁄ 4 11⁄ 16 22
R 0 M12 521 102 556 22 38 32 6 17 10
H 1 1⁄ 2 231⁄8 4 241⁄2 7⁄ 8 11⁄2 11⁄4 1⁄ 4 11⁄ 16 23
A 1 M12 587 102 622 22 38 32 6 17 10
2 1⁄ 2 253⁄8 4 263⁄4 7⁄ 8 11⁄2 11⁄4 1⁄ 4 11⁄ 16 26
0

2 M12 645 102 679 22 38 32 6 17 12

1 1/2
3 1⁄ 2 225⁄8 59⁄16 24 7⁄ 8 11⁄2 11⁄4 1⁄ 4 11⁄ 16 35
3 M12 575 141 610 22 38 32 6 17 16
3
4 1⁄ 2 251⁄2 59⁄16 267⁄8 7⁄ 8 11⁄2 11⁄4 1⁄ 4 11⁄ 16 43
4 1/2
4 M12 648 141 683 22 38 32 6 17 20
5 1⁄ 2 26 59⁄16 273⁄8 7⁄ 8 11⁄2 11⁄4 1⁄ 4 11⁄ 16 48
6
5 M12 660 141 695 22 38 32 6 17 22
7 1/2
6 5⁄ 8 26 65 ⁄ 8 271⁄4 11⁄8 11⁄2 11⁄4 1⁄ 4 13⁄ 16 64
LD LBS DEFL IN

6 M16 660 168 692 29 38 32 6 21 29

FIG. NO. SIZE

CALIBRATED LOAD
TYPE

TRAVEL 7 5⁄ 8 29 65 ⁄ 8 301⁄4 11⁄8 11⁄2 11⁄4 1⁄ 4 13⁄ 16 63

7 M16 737 168 768 29 38 32 6 21 29
MARK NUMBER SERIAL NUMBER

E
8 5⁄ 8 301⁄2 65 ⁄ 8 313⁄4 11⁄8 11⁄2 11⁄4 1⁄ 4 13⁄ 16 75
B 8 M16 775 168 806 29 38 32 6 21 34
9 3⁄ 4 287⁄8 85 ⁄ 8 301⁄4 11⁄4 11⁄2 11⁄4 3⁄ 8 15⁄ 16 123
9 M20 733 219 768 32 38 32 10 24 56
10 3⁄ 4 341⁄2 85 ⁄ 8 357⁄8 11⁄4 11⁄2 11⁄4 3⁄ 8 15⁄ 16 139
10 M20 876 219 911 32 38 32 10 24 63
11 3⁄ 4 28 85 ⁄ 8 293⁄8 11⁄4 11⁄2 11⁄4 3⁄ 8 15⁄ 16 163
11 M20 711 219 746 32 38 32 10 24 74
12 1 301⁄2 85 ⁄ 8 323⁄8 15⁄8 2 1 1⁄ 2 1⁄ 2 11⁄4 185
12 M24 775 219 822 41 51 38 13 32 84
13 1 381⁄8 85 ⁄ 8 40 15⁄8 2 11⁄2 1⁄ 2 11⁄4 210
13 M24 968 219 1016 41 51 38 13 32 95
14 11⁄4 383⁄4 85 ⁄ 8 411⁄2 13⁄4 3 2 1⁄ 2 11⁄2 224
14 M30 984 219 1054 44 76 51 13 38 102
15 11⁄4 381⁄2 85 ⁄ 8 411⁄4 13⁄4 3 2 5⁄ 8 11⁄2 300
15 M30 978 219 1048 44 76 51 16 38 136
16 11⁄2 463⁄8 85 ⁄ 8 491⁄4 2 3 21⁄2 3⁄ 4 13⁄4 403
16 M36 1178 219 1251 51 76 64 19 44 183
17 13⁄4 503⁄4 85 ⁄ 8 533⁄8 25⁄8 3 21⁄2 3⁄ 4 2 535
F A 17 M42 1289 219 1356 67 76 64 19 51 243
C 18 2 51 123⁄4 547⁄8 27⁄8 4 3 3⁄ 4 23⁄8 783
18 M48 1295 324 1394 73 102 76 19 60 355
19 21⁄4 583⁄4 123⁄4 633⁄8 31⁄2 41⁄2 3 3⁄ 4 25⁄8 929
19 M56 1492 324 1610 89 114 76 19 67 421
A-A 20 21⁄2 693⁄4 123⁄4 741⁄8 37⁄8 41⁄2 4 1 27 ⁄ 8 1342
20 M64 1772 324 1883 98 114 102 25 73 609
21 23⁄4 771⁄2 123⁄4 817⁄8 41⁄4 41⁄2 4 1 31 ⁄ 8 1475
21 M72 1969 324 2080 108 114 102 25 79 669
22 3 947⁄8 123⁄4 1001⁄8 41 ⁄ 4 5 4 1 33⁄8 2025
22 M80x6 2410 324 2543 108 127 102 25 86 919

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load,
Cold Load, Movement and Direction of Movement (from the Cold/Installed
LUG HOLE position to the Hot/Operating position), and Hanger Identification Number
DIAMETER
(if any). Specify any other optional feature(s) as necessary.
Pins for attachment to the structure are not included with the unit and must
be ordered separately as a Figure 291, shown on page 8 of this catalog. For
ordering specify Figure Number, pin diameter and finish.
For corrosion resistant units specify the Figure Number with the letter prefix
“C”, e.g. C910
For metric units specify the Figure Number with the letter prefix “M” e.g.
M910 or MC910.

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

32
 VARIABLE SPRING SUPPORTS

SERIES 960 - TYPE C

MIN. HGT.
ROD CASE CASE ROD THD. OF LUG APPROX.
S A SIZE LGTH. DIA. T’OUT ENGM'T PIN HOLE WGT
T SIZE A B C E F H R S T DIA. EACH
R 0 1⁄ 2 201⁄2 4 217⁄8 7⁄ 8 11⁄2 11 ⁄ 4 7⁄ 8 1⁄ 4 11⁄ 16 22
0 M12 521 102 556 22 38 32 22 6 17 10
H 1 1⁄ 2 231⁄8 4 241⁄2 7⁄ 8 11⁄2 11 ⁄ 4 7⁄ 8 1⁄ 4 11⁄ 16 23
A 1 M12 587 102 622 22 38 32 22 6 17 10
2 1⁄ 2 253⁄8 4 263⁄4 7⁄ 8 11⁄2 11 ⁄ 4 7⁄ 8 1⁄ 4 11⁄ 16 26
0

2 M12 645 102 679 22 38 32 22 6 17 12

1 1/2
3 1⁄ 2 225⁄8 59⁄16 24 7⁄ 8 11⁄2 11 ⁄ 4 7⁄ 8 1⁄ 4 11⁄ 16 35
3 M12 575 141 610 22 38 32 22 6 17 16
3
4 1⁄ 2 251⁄2 59⁄16 267⁄8 7⁄ 8 11⁄2 11 ⁄ 4 7⁄ 8 1⁄ 4 11⁄ 16 43
4 M12 648 141 683 22 38 32 22 6 17 20
4 1/2

5 1⁄ 2 26 59⁄16 273⁄8 7⁄ 8 11⁄2 11 ⁄ 4 7⁄ 8 1⁄ 4 11⁄ 16 48

6
5 M12 660 141 695 22 38 32 22 6 17 22
6 5⁄ 8 26 65⁄8 271⁄4 11⁄8 11⁄2 11 ⁄ 4 11⁄16 1⁄ 4 13⁄ 16 64
LD LBS
7 1/2
DEFL IN 6 M16 660 168 692 29 38 32 27 6 21 29
FIG. NO. SIZE TYPE
7 5⁄ 8 29 65⁄8 301⁄4 11⁄8 11⁄2 11 ⁄ 4 11⁄16 1⁄ 4 13⁄ 16 63
CALIBRATED LOAD

MARK NUMBER
TRAVEL

SERIAL NUMBER 7 M16 737 168 768 29 38 32 27 6 21 29

8 5⁄ 8 301⁄2 65⁄8 313⁄4 11⁄8 11⁄2 11 ⁄ 4 11⁄16 1⁄ 4 13⁄ 16 75
E 8 M16 775 168 806 29 38 32 27 6 21 34
B 9 3⁄ 4 287⁄8 85⁄8 301⁄4 11⁄4 11⁄2 11 ⁄ 4 11 ⁄ 4 3⁄ 8 15⁄ 16 123
9 M20 733 219 768 32 38 32 32 10 24 56
10 3⁄ 4 341⁄2 85⁄8 357⁄8 11⁄4 11⁄2 11 ⁄ 4 11 ⁄ 4 3⁄ 8 15⁄ 16 139
10 M20 876 219 911 32 38 32 32 10 24 63
11 3⁄ 4 28 85⁄8 293⁄8 11⁄4 11⁄2 11 ⁄ 4 11 ⁄ 4 3⁄ 8 15⁄ 16 163
11 M20 711 219 746 32 38 32 32 10 24 74
12 1 301⁄2 8 5⁄ 8 323⁄8 15⁄8 2 11⁄2 11 ⁄ 4 1⁄ 2 11⁄4 185
12 M24 775 219 822 41 51 38 32 13 32 84
13 1 381⁄8 85⁄8 40 15⁄8 2 11⁄2 11 ⁄ 4 1⁄ 2 11⁄4 210
13 M24 968 219 1016 41 51 38 32 13 32 95
14 11⁄4 383⁄4 85⁄8 411⁄2 13⁄4 3 2 2 1⁄ 2 11⁄2 224
14 M30 984 219 1054 44 76 51 51 13 38 102
15 11⁄4 381⁄2 85⁄8 411⁄4 13⁄4 3 2 2 5⁄ 8 11⁄2 300
15 M30 978 219 1048 44 76 51 51 16 38 136
16 11⁄2 463⁄8 85⁄8 491⁄4 2 3 21⁄2 23 ⁄ 8 3⁄ 4 13⁄4 403
16 M36 1178 219 1251 51 76 64 60 19 44 183
17 13⁄4 503⁄4 85⁄8 533⁄8 25⁄8 3 21⁄2 23 ⁄ 8 3⁄ 4 2 535
17 M42 1289 219 1356 67 76 64 60 19 51 243
F A 18 2 51 123⁄4 547⁄8 27⁄8 4 3 23 ⁄ 8 3⁄ 4 23⁄8 783
18 M48 1295 324 1394 73 102 76 60 19 60 355
C
19 21⁄4 583⁄4 123⁄4 633⁄8 31⁄2 41⁄2 3 23 ⁄ 8 3⁄ 4 25⁄8 929
19 M56 1492 324 1610 89 114 76 60 19 67 421
20 21⁄2 693⁄4 123⁄4 741⁄8 37⁄8 41⁄2 4 33 ⁄ 8 1 27⁄8 1342
20 M64 1772 324 1883 98 114 102 86 25 73 609
A-A 21 23⁄4 771⁄2 123⁄4 817⁄8 41⁄4 41⁄2 4 33 ⁄ 8 1 31⁄8 1475
21 M72 1969 324 2080 108 114 102 86 25 79 669
22 3 947⁄8 123⁄4 1001⁄8 41⁄4 5 4 37 ⁄ 8 1 33⁄8 2025
22 M80x6 2410 324 2543 108 127 102 98 25 86 919

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold
Load, Movement and Direction of Movement (from the Cold/Installed position to
the Hot/Operating position), and Hanger Identification Number (if any). Specify
LUG HOLE
any other optional feature(s) as necessary.
DIAMETER Pins for attachment to the structure are not included with the unit and must be
ordered separately as a Figure 291, shown on page 8 of this catalog. For ordering
specify Figure Number, pin diameter and finish.
For corrosion resistant units specify the Figure Number with the letter prefix “C”,
e.g. C910
For metric units specify the Figure Number with the letter prefix “M” e.g. M910 or
MC910.

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

33
VARIABLE SPRING SUPPORTS

SERIES 960 TYPE D

ROD CASE CASE ROD HGT. OF APPROX.
A HANGER SIZE LENGTH DIA. TAKEOUT SPACER WEIGHT
SIZE A B C E M EACH
ROD, NUTS,
0 1⁄ 2 201⁄2 4 293⁄4 81⁄2 21
AND WASHER
0 M12 521 102 756 216 9.5
NOT FURNISHED
M 1 1⁄ 2 231⁄8 4 323⁄8 81⁄2 22
1 M12 587 102 822 216 10
2 1⁄ 2 253⁄8 4 345⁄8 81⁄2 25
0
2 M12 645 102 879 216 11
3 1⁄ 2 225⁄8 59⁄16 317⁄8 81⁄2 34
1 1/2 3 M12 575 141 810 216 15
4 1⁄ 2 251⁄2 59⁄16 343⁄4 81⁄2 42
3
4 M12 648 141 883 216 19
4 1/2
5 1⁄ 2 26 59⁄16 351⁄4 81⁄2 46
5 M12 660 141 895 216 21
6
6 5⁄ 8 26 65 ⁄ 8 351⁄2 81⁄2 60
6 M16 660 168 902 216 27
LD LBS DEFL IN
7 1/2

7 5⁄ 8 29 65 ⁄ 8 381⁄2 81⁄2 62
FIG. NO. SIZE TYPE

7 M16 737 168 978 216 28

E
CALIBRATED LOAD TRAVEL

MARK NUMBER SERIAL NUMBER

8 5⁄ 8 301⁄2 65 ⁄ 8 40 81⁄2 73
8 M16 775 168 1016 216 33
B 9 3⁄ 4 287⁄8 85 ⁄ 8 385⁄8 85⁄8 119
9 M20 733 219 981 219 54
10 3⁄ 4 341⁄2 85 ⁄ 8 441⁄4 85⁄8 135
10 M20 876 219 1124 219 61
11 3⁄ 4 28 85 ⁄ 8 373⁄4 85⁄8 157
11 M20 711 219 959 219 71
12 1 301⁄2 85 ⁄ 8 41 9 178
12 M24 775 219 1041 229 81
13 1 301⁄8 85 ⁄ 8 401⁄4 9 198
13 M24 765 219 1022 229 90
14 11⁄4 383⁄4 85 ⁄ 8 497⁄8 91⁄4 212
14 M30 984 219 1267 235 96
15 11⁄4 381⁄2 85 ⁄ 8 491⁄2 91⁄8 285
15 M30 978 219 1257 232 129
16 11⁄2 463⁄8 85 ⁄ 8 581⁄4 95⁄8 375
16 M36 1178 219 1480 244 170
17 13⁄4 503⁄4 85 ⁄ 8 621⁄8 93⁄4 491
17 M42 1289 219 1578 248 223
18 2 51 123⁄4 64 10 732
18 M48 1295 324 1626 254 332
19 21⁄4 583⁄4 123⁄4 723⁄8 101⁄4 863
C 19 M56 1492 324 1838 260 391
20 21⁄2 693⁄4 123⁄4 84 101⁄2 1225
20 M64 1772 324 2134 267 556
21 23⁄4 771⁄2 123⁄4 923⁄8 103⁄4 1662
21 M72 1969 324 2346 273 754
22 3 947⁄8 123⁄4 1103⁄8 11 2232
22 M80x6 2410 324 2805 279 1012

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot

Load, Cold Load, Movement and Direction of Movement (from the
Cold/Installed position to the Hot/Operating position), and Hanger
Identification Number (if any). Specify any other optional feature(s) as
necessary.
For corrosion resistant units specify the Figure Number with the letter
prefix “C”, e.g. C960
For metric units specify the Figure Number with the letter prefix “M”
e.g. M960 or MC960.

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

34
 VARIABLE SPRING SUPPORTS

SERIES 960 TYPE E

ROD CASE CASE MIN. THD. APPROX.
HANGER SIZE LENGTH DIAMETER ENGM'T WEIGHT
SIZE A B C F EACH
C 0 1⁄ 2 201⁄2 4 7⁄ 8 21
MUST BE
TACK WELDED
0 M12 521 102 22 9.5
BY CUSTOMER 1 1⁄ 2 231⁄8 4 7⁄ 8 22
R.H. AND L.H. 1 M12 587 102 22 10
ROD AND NUT
0

NOT FURNISHED,
2 1⁄ 2 253⁄8 4 7⁄ 8 25
1 1/2

LENGTH TO 2 M12 645 102 22 11

3 SUIT CUSTOMER 3 1⁄ 2 225⁄8 59⁄16 7⁄ 8 34
REQUIREMENT 3 M12 575 141 22 15
4 1/2

4 1⁄ 2 251⁄2 59⁄16 7⁄ 8 42
6 4 M12 648 141 22 19
7 1/2
5 1⁄ 2 26 59⁄16 7⁄ 8 46
5 M12 660 141 22 21
LD LBS DEFL IN

FIG. NO. SIZE TYPE

CALIBRATED LOAD

MARK NUMBER
TRAVEL

SERIAL NUMBER
6 5⁄ 8 26 65⁄8 11 ⁄ 8 60
6 M16 660 168 29 27
7 5⁄ 8 29 65⁄8 11 ⁄ 8 62
B
7 M16 737 168 29 28
8 5⁄ 8 301⁄2 65 ⁄ 8 11 ⁄ 8 73
8 M16 775 168 29 33
9 3⁄ 4 287⁄8 85 ⁄ 8 11 ⁄ 4 119
9 M20 733 219 32 54
10 3⁄ 4 341⁄2 85 ⁄ 8 11 ⁄ 4 135
10 M20 876 219 32 61
11 3⁄ 4 28 85⁄8 11 ⁄ 4 157
11 M20 711 219 32 71
12 1 301⁄2 85 ⁄ 8 15 ⁄ 8 178
12 M24 775 219 41 81
13 1 381⁄8 85 ⁄ 8 15 ⁄ 8 198
13 M24 968 219 41 90
14 11⁄4 383⁄4 85 ⁄ 8 13 ⁄ 4 212
14 M30 984 219 44 96
F 15 11⁄4 381⁄2 85 ⁄ 8 13 ⁄ 4 285
15 M30 978 219 44 129
16 11⁄2 463⁄8 85 ⁄ 8 2 375
L.H. THD.
16 M36 1178 219 51 170
17 13⁄4 503⁄4 8 ⁄8
5 25 ⁄ 8 491
12" 17 M42 1289 219 67 223
MUST BE 18 2 51 123⁄4 27 ⁄ 8 732
TACK WELDED 18 M48 1295 324 73 332
BY CUSTOMER 19 21⁄4 583⁄4 123⁄4 31 ⁄ 2 863
19 M56 1492 324 89 391
20 21⁄2 693⁄4 123⁄4 37 ⁄ 8 1225
A F 20 M64 1772 324 98 556
TURNBUCKLE 21 23⁄4 771⁄2 123⁄4 41 ⁄ 4 1662
IS FURNISHED 21 M72 1969 324 108 754
22 3 947⁄8 123⁄4 41 ⁄ 4 2232
22 M80X6 2410 324 108 1012

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot

Load, Cold Load, Movement and Direction of Movement (from the
Cold/Installed position to the Hot/Operating position), and Hanger
Identification Number (if any). Specify any other optional feature(s) as
necessary.
For corrosion resistant units specify the Figure Number with the letter
prefix “C”, e.g. C960
For metric units specify the Figure Number with the letter prefix “M”
e.g. M960 or MC960.

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

35
VARIABLE SPRING SUPPORTS

SERIES 960 - TYPE F

CASE CASE BOTTOM BOLT OVERALL LOAD LOAD APPROX.
LNGTH. DIA. FLANGE BOTTOM CIRCLE LNGTH. X ** FLANGE FLANGE WGT.
SIZE B C BOLT DIA. FLANGE MIN. MAX. MIN. MAX. DIA. THICK. EACH
0 183⁄4 4 5⁄ 8 1⁄ 4 x 71⁄2 x 71⁄2 7 93⁄4 201⁄4 221⁄4 37⁄8 1⁄ 4 31
0 476 102 16 6 x 191 x 191 178 248 514 565 98 6 14
0

1 213⁄8 4 5⁄ 8 1⁄ 4 x 71⁄ 2 x 71⁄ 2 7 93⁄4 227⁄8 247⁄8 37⁄8 1⁄ 4 31

1 1/2

1 543 102 16 6 x 191 x 191 178 248 581 632 98 6 14

3
2 235⁄8 4 5⁄ 8 1⁄ 4 x 71⁄ 2 x 71⁄ 2 7 93⁄4 251⁄8 271⁄8 37⁄8 1⁄ 4 35
4 1/2
2 600 102 16 6 x 191 x 191 178 248 638 689 98 6 16
6 3 21 59⁄16 3⁄ 4 1⁄ 4 x 71⁄ 2 x 71⁄ 2 73⁄4 93⁄4 221⁄2 241⁄2 53⁄8 1⁄ 4 51
LD LBS DEFL IN
7 1/2
3 533 141 19 6 x 191 x 191 197 248 572 622 137 6 23
FIG. NO. SIZE TYPE

4 227⁄8 59⁄16 3⁄ 4 1⁄ 4 x 71⁄ 2 x 71⁄ 2 73⁄4 93⁄4 243⁄8 263⁄8 53⁄8 1⁄ 4 59

CALIBRATED LOAD TRAVEL

4 581 141 19 6 x 191 x 191 197 248 619 670 137 6 27

MARK NUMBER SERIAL NUMBER

5 243⁄4 59⁄16 3⁄ 4 1⁄ 4 x 71⁄ 2 x 71⁄ 2 73⁄4 93⁄4 263⁄8 283⁄8 53⁄8 1⁄ 4 64

5 629 141 19 6 x 191 x 191 197 248 670 721 137 6 29
X B 6 241⁄2 65⁄8 3⁄ 4 3⁄ 8 x 9 x 9 91⁄4 101⁄2 261⁄4 281⁄4 63⁄8 1⁄ 4 92
6 622 168 19 10 x 229 x 229 235 267 667 718 162 6 42
7 253⁄8 65⁄8 3⁄ 4 3⁄ 8 x 9 x 9 91⁄4 101⁄2 291⁄8 311⁄8 63⁄8 1⁄ 4 90
7 645 168 19 10 x 229 x 229 235 267 740 791 162 6 41
8 283⁄4 65⁄8 3⁄ 4 3⁄ 8 x 9 x 9 91⁄4 101⁄2 301⁄2 321⁄2 63⁄8 1⁄ 4 104
8 730 168 19 10 x 229 x 229 235 267 775 826 162 6 47
9 267⁄8 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 287⁄8 307⁄8 83⁄8 1⁄ 2 171
9 683 219 19 13 x 337 x 337 268 413 733 784 213 13 78
10 321⁄2 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 341⁄2 361⁄2 83⁄8 1⁄ 2 188
10 826 219 19 13 x 337 x 337 268 413 876 927 213 13 85
11 257⁄8 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 277⁄8 297⁄8 83⁄8 1⁄ 2 207
11 657 219 19 13 x 337 x 337 268 413 708 759 213 13 94
12 271⁄2 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 281⁄2 301⁄2 83⁄8 1⁄ 2 229
C 12 699 219 19 13 x 337 x 337 268 413 724 775 213 13 104
13 351⁄2 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 371⁄2 391⁄2 83⁄8 1⁄ 2 246
13 902 219 19 13 x 337 x 337 268 413 953 1003 213 13 112
14 357⁄8 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 377⁄8 397⁄8 83⁄8 1⁄ 2 261
14 911 219 19 13 x 337 x 337 268 413 962 1013 213 13 118
15 357⁄8 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 377⁄8 397⁄8 83⁄8 1⁄ 2 335
15 911 219 19 13 x 337 x 337 268 413 959 1013 213 13 152
16 423⁄4 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 443⁄4 463⁄4 83⁄8 1⁄ 2 428
LE
C

16 1086 219 19 13 x 337 x 337 268 413 1137 1187 213 13 194
IR

1⁄ 2 x 131⁄ 4 x 131⁄ 4
C

17 49 85⁄8 3⁄ 4 109⁄16 161⁄4 51 53 83⁄8 1⁄ 2 542

LT

17 1245 219 19 13 x 337 x 337 268 413 1295 1346 213 13 246
BO

18 467⁄8 123⁄4 3⁄ 4 5⁄ 8 x 171⁄ 4 x 171⁄ 4 153⁄4 21 49 51 121⁄2 1⁄ 2 805

18 1191 324 19 16 x 438 x 438 400 533 1245 1295 318 13 365
19 535⁄8 123⁄4 3⁄ 4 5⁄ 8 x 171⁄ 4 x 171⁄ 4 153⁄4 21 553⁄4 573⁄4 121⁄2 1⁄ 2 826
19 1362 324 19 16 x 438 x 438 400 533 1416 1467 318 13 375
20 633⁄8 123⁄4 3⁄ 4 5⁄ 8 x 171⁄ 4 x 171⁄ 4 153⁄4 21 661⁄4 681⁄4 121⁄2 1⁄ 2 1178
20 1610 324 19 16 x 438 x 438 400 533 1683 1734 318 13 534
21 701⁄4 123⁄4 3⁄ 4 5⁄ 8 x 171⁄ 4 x 171⁄ 4 153⁄4 21 731⁄8 751⁄8 121⁄2 1⁄ 2 1425
21 1784 324 19 16 x 438 x 438 400 533 1857 1908 318 13 646
22 881⁄2 123⁄4 3⁄ 4 5⁄ 8 x 171⁄ 4 x 171⁄ 4 153⁄4 21 913⁄8 933⁄8 121⁄2 1⁄ 2 1700
22 2248 324 19 16 x 438 x 438 400 533 2321 2372 318 13 771

** The Installed Height should be the mid-point between the Maximum and Minimum Overall
Height "X" , plus the thickness of the Load Flange, and plus any DOWN piping movement
when applicable.

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load,
Movement and Direction of Movement (from the Cold/Installed position to the
Hot/Operating position), Dimension X (Installed Height) and Hanger Identification
Number (if any). Specify any other optional feature(s) as necessary.
For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C960
For metric units specify the Figure Number with the letter prefix “M” e.g. M960 or MC960.

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

36
 VARIABLE SPRING SUPPORTS

C-C Rod Dimension

A F as specified
by customer
E P
W Ordering: Specify Figure Number (Travel Series), Type,
Size, Total Load, Hot Load per spring, Cold Load per
spring, Movement and Direction of Movement (from the
Cold/Installed position to the Hot/Operating position),
Center to Center of Rods dimension and Hanger
B
FIG. NO.

CALIBRATED LOAD
SIZE TYPE

TRAVEL
FIG. NO. SIZE

CALIBRATED LOAD
TYPE

TRAVEL
Identification Number (if any). Specify any other optional
MARK NUMBER

7 1/2
DEFL IN
SERIAL NUMBER

LD LBS
MARK NUMBER

LD LBS DEFL IN
SERIAL NUMBER

7 1/2
feature(s) as necessary.
6 6

For corrosion resistant units specify the Figure Number

with the letter prefix “C”, e.g. C960
4 1/2 4 1/2

3 3

1 1/2

0
1 1/2

0
For metric units specify the Figure Number with the letter
prefix “M” e.g. M960 or MC960.
C

FIGURE 960 TYPE G

ROD CASE CASE ROD MIN. THD. CHANNEL APPROX.
HANGER SIZE LENGTH DIAMETER TAKEOUT ENGM'T CHANNEL MAX. SPACING WEIGHT
SIZE A B C E F SIZE C-C W P EACH
0 1⁄ 2 201⁄2 4 13 ⁄ 8 7⁄ 8 C3 x 4.1 24 5⁄ 8 11⁄2 55
0 M12 521 102 35 22 C75 x 6 610 16 38 25
1 1⁄ 2 231⁄8 4 13 ⁄ 8 7⁄ 8 C3 x 4.1 24 5⁄ 8 11⁄2 57
1 M12 587 102 35 22 C75 x 6 610 16 38 26
2 1⁄ 2 253⁄8 4 13 ⁄ 8 7⁄ 8 C3 x 4.1 24 5⁄ 8 11⁄2 64
2 M12 645 102 35 22 C75 x 6 610 16 38 29
3 1⁄ 2 225⁄8 59⁄16 17⁄8 7⁄ 8 C3 x 4.1 30 3⁄ 4 2 81
3 M12 575 141 48 22 C75 x 6 762 19 51 37
4 1⁄ 2 251⁄2 59⁄16 17⁄8 7⁄ 8 C3 x 4.1 30 3⁄ 4 2 99
4 M12 648 141 48 22 C75 x 6 762 19 51 45
5 1⁄ 2 26 59⁄16 17⁄8 7⁄ 8 C3 x 4.1 30 3⁄ 4 2 106
5 M12 660 141 48 22 C75 x 6 762 19 51 48
6 5⁄ 8 26 65 ⁄ 8 27⁄8 11⁄8 C3 x 4.1 36 1 2 139
6 M16 660 168 73 29 C75 x 6 914 25 51 63
7 5⁄ 8 29 65 ⁄ 8 27⁄8 11⁄8 C3 x 4.1 36 1 2 135
7 M16 737 168 73 29 C75 x 6 914 25 51 61
8 5⁄ 8 301⁄2 65⁄8 27⁄8 11⁄8 C3 x 4.1 36 1 2 162
8 M16 775 168 73 29 C75 x 6 914 25 51 73
9 3⁄ 4 287⁄8 85⁄8 27⁄8 11⁄4 C4 x 5.4 36 11⁄4 3 255
9 M20 733 219 73 32 C100 x 8 914 32 76 116
10 3⁄ 4 341⁄2 85⁄8 27⁄8 11⁄4 C4 x 5.4 36 11⁄4 3 287
10 M20 876 219 73 32 C100 x 8 914 32 76 130
11 3⁄ 4 28 85 ⁄ 8 27⁄8 11⁄4 C4 x 5.4 36 11⁄4 3 336
11 M20 711 219 73 32 C100 x 8 914 32 76 152
12 1 301⁄2 85⁄8 37⁄8 15⁄8 C5 x 6.7 36 11⁄2 4 384
12 M24 775 219 98 41 C130 x 10 914 38 102 174
13 1 381⁄8 85⁄8 37⁄8 15⁄8 C5 x 6.7 36 11⁄2 4 432
13 M24 968 219 98 41 C130 x 10 914 38 102 196
14 11⁄4 383⁄4 85⁄8 37⁄8 13⁄4 C5 x 6.7 36 11⁄2 4 460
14 M30 984 219 98 44 C130 x 10 914 38 102 209
15 11⁄4 381⁄2 85⁄8 37⁄8 13⁄4 C8 x 11.5 36 21 ⁄ 8 4 621
15 M30 978 219 98 44 C200 x 17 914 54 102 282
16 11⁄2 463⁄8 85⁄8 37⁄8 2 C8 x 11.5 36 21 ⁄ 8 4 821
16 M36 1178 219 98 51 C200 x 17 914 54 102 372
17 13⁄4 503⁄4 85⁄8 37⁄8 25⁄8 C8 x 11.5 36 21 ⁄ 8 4 1085
17 M42 1289 219 98 67 C200 x 17 914 54 102 492
18 2 51 123⁄4 37⁄8 27⁄8 C12 x 20.7 42 23⁄8 4 1582
18 M48 1295 324 98 73 C130 x 31 1067 60 102 718
19 21⁄4 583⁄4 123⁄4 31⁄2 31⁄2 C12 x 20.7 42 25⁄8 4 1870
19 M56 1492 324 89 89 C130 x 31 1067 67 102 848
20 21⁄2 693⁄4 123⁄4 37⁄8 37⁄8 C12 x 20.7 40 27⁄8 4 2668
20 M64 1772 324 98 98 C130 x 31 1016 73 102 1210
21 23⁄4 771⁄2 123⁄4 41⁄4 41⁄4 C15 x 33.9 48 31⁄8 4 3560
21 M72 1969 324 108 108 C380 x 50 1219 79 102 1615
22 3 947⁄8 123⁄4 41⁄4 41⁄4 C15 x 33.9 48 33⁄8 4 4600
22 M80x6 2410 324 108 108 C380 x 50 1219 86 102 2087

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

37
VARIABLE SPRING SUPPORTS

SERIES 980 - TYPE A

MIN.
G A ROD CASE CASE ROD THD. ROD APPROX.
SIZE LGTH DIA. T’OUT ENGM'T ENGM'T WGT
SIZE A B C E F G EACH
0 1⁄ 2 27 4 267⁄8 7⁄ 8 7⁄ 8 32
0

0 M12 686 102 683 22 22 15

1 1/2
1 1⁄ 2 293⁄8 4 291⁄4 7⁄ 8 7⁄ 8 34
1 M12 746 102 743 22 22 15
3
2 1⁄ 2 303⁄8 4 301⁄4 7⁄ 8 7⁄ 8 38
4 1/2
2 M12 772 102 768 22 22 17
3 1⁄ 2 291⁄2 5 ⁄16
9 293⁄8 7⁄ 8 7⁄ 8 52
6
3 M12 749 141 746 22 22 24
7 1/2
4 1⁄ 2 32 5 9⁄16 317⁄8 7⁄ 8 7⁄ 8 62
4 M12 813 141 810 22 22 28
9 5 1⁄ 2 343⁄4 59⁄16 345⁄8 7⁄ 8 7⁄ 8 68
LD LBS DEFL IN
5 M12 883 141 879 22 22 31
FIG. NO.

CALIBRATED LOAD
SIZE TYPE

TRAVEL
6 5⁄ 8 34 65⁄8 333⁄4 11⁄8 11 ⁄ 8 90
MARK NUMBER SERIAL NUMBER

6 M16 864 168 857 29 29 41

7 5⁄ 8 377⁄8 65⁄8 373⁄4 11⁄8 11 ⁄ 8 88
7 M16 962 168 959 29 29 40
8 5⁄ 8 393⁄4 65⁄8 391⁄2 11⁄8 11 ⁄ 8 106
8 M16 1010 168 1003 29 29 48
9 3⁄ 4 397⁄8 85⁄8 393⁄4 11⁄4 11 ⁄ 4 170
9 M20 1013 219 1010 32 32 77
10 3⁄ 4 447⁄8 85⁄8 443⁄4 11⁄4 11 ⁄ 4 187
10 M20 1140 219 1137 32 32 85
11 3⁄ 4 361⁄8 85⁄8 36 11⁄4 11 ⁄ 4 219
E B
11 M20 918 219 914 32 32 99
12 1 391⁄4 85⁄8 391⁄8 15⁄8 15 ⁄ 8 253
12 M24 997 219 994 41 41 115
13 1 491⁄2 85⁄8 493⁄8 15⁄8 15 ⁄ 8 287
13 M24 1257 219 1254 41 41 130
14 11⁄4 501⁄4 85⁄8 50 13⁄4 13 ⁄ 4 303
14 M30 1276 219 1270 44 44 137
15 11⁄4 493⁄4 85⁄8 491⁄2 13⁄4 13 ⁄ 4 420
15 M30 1264 219 1257 44 44 191
16 11⁄2 60 85⁄8 597⁄8 2 2 550
16 M36 1524 219 1521 51 51 249
17 13⁄4 681⁄2 85⁄8 681⁄8 25⁄8 25 ⁄ 8 733
17 M42 1740 219 1730 67 67 332
18 2 66 123⁄4 657⁄8 27⁄8 27 ⁄ 8 1122
18 M48 1676 324 1673 73 73 509
19 21⁄4 753⁄4 123⁄4 755⁄8 31⁄2 31 ⁄ 2 1310
19 M56 1924 324 1921 89 89 594
20 21⁄2 90 123⁄4 897⁄8 37⁄8 37 ⁄ 8 1872
20 M64 2286 324 2283 98 98 849
21 23⁄4 100 123⁄4 997⁄8 41⁄4 41⁄4 2052
21 M72 2540 324 2537 108 108 931
22 3 1241⁄2 123⁄4 1243⁄8 41⁄4 41 ⁄ 4 2831
22 M80x6 3162 324 3159 108 108 1284

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot

Load, Cold Load, Movement and Direction of Movement (from the
F C Cold/Installed position to the Hot/Operating position), and Hanger
Identification Number (if any). Specify any other optional feature(s)
as necessary.
For corrosion resistant units specify the Figure Number with the letter
prefix “C”, e.g. C980
For metric units specify the Figure Number with the letter prefix “M”
e.g. M980 or MC980.

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

38
 VARIABLE SPRING SUPPORTS

FIGURE 980 TYPE B

MIN. HGT.
A ROD CASE CASE ROD THD. OF LUG APPROX.
T
R
SIZE LGTH. DIA. T’OUT ENGM'T PIN HOLE WGT.
SIZE A B C E F H R T DIA. EACH
H 0 1⁄ 2 27 4 283⁄8 7⁄ 8 11⁄2 11⁄4 1⁄ 4 11⁄ 16 32
A 0 M12 686 102 721 22 38 32 6 17 15
0
1 1⁄ 2 293⁄8 4 303⁄4 7⁄ 8 11⁄2 11⁄4 1⁄ 4 11⁄ 16 34
1 M12 746 102 781 22 38 32 6 17 15
1 1/2 2 1⁄ 2 303⁄8 4 313⁄4 7⁄ 8 11⁄2 11⁄4 1⁄ 4 11⁄ 16 38
2 M12 772 102 806 22 38 32 6 17 17
3

3 1⁄ 2 291⁄2 59⁄16 307⁄8 7⁄ 8 11⁄2 11⁄4 1⁄ 4 11⁄ 16 52

4 1/2 3 M12 749 141 784 22 38 32 6 17 24
4 1⁄ 2 32 59⁄16 333⁄8 7⁄ 8 11⁄2 11⁄4 1⁄ 4 11⁄ 16 62
6

4 M12 813 141 848 22 38 32 6 17 28

7 1/2
5 1⁄ 2 343⁄4 59⁄16 361⁄8 7⁄ 8 11⁄2 11⁄4 1⁄ 4 11⁄ 16 68
5 M12 883 141 918 22 38 32 6 17 31
9
6 5⁄ 8 34 65 ⁄ 8 351⁄4 11⁄8 11⁄2 11⁄4 1⁄ 4 13⁄ 16 90
LD LBS

FIG. NO.
DEFL IN

SIZE TYPE
6 M16 864 168 895 29 38 32 6 21 41
CALIBRATED LOAD

MARK NUMBER
TRAVEL

SERIAL NUMBER
7 5⁄ 8 377⁄8 65 ⁄ 8 381⁄4 11⁄8 11⁄2 11⁄4 1⁄ 4 13⁄ 16 88
7 M16 962 168 972 29 38 32 6 21 40
8 5⁄ 8 393⁄4 65 ⁄ 8 41 11⁄8 11⁄2 11⁄4 1⁄ 4 13⁄ 16 106
8 M16 1010 168 1041 29 38 32 6 21 48
9 3⁄ 4 397⁄8 85 ⁄ 8 411⁄4 11⁄4 11⁄2 11⁄4 3⁄ 8 15⁄ 16 170
9 M20 1013 219 1048 32 38 32 10 24 77
10 3⁄ 4 447⁄8 85 ⁄ 8 461⁄4 11⁄4 11⁄2 11⁄4 3⁄ 8 15⁄ 16 187
10 M20 1140 219 1175 32 38 32 10 24 85
11 3⁄ 4 361⁄8 85 ⁄ 8 371⁄2 11⁄4 11⁄2 11⁄4 3⁄ 8 15⁄ 16 219
11 M20 918 219 953 32 38 32 10 24 99
E
B 12 1 391⁄4 85 ⁄ 8 411⁄8 15⁄8 2 11⁄2 1⁄ 2 11⁄4 253
12 M24 997 219 1045 41 51 38 13 32 115
13 1 491⁄2 85 ⁄ 8 513⁄8 15⁄8 2 11⁄2 1⁄ 2 11⁄4 287
13 M24 1257 219 1305 41 51 38 13 32 130
14 11⁄4 501⁄4 85 ⁄ 8 53 13⁄4 3 2 1⁄ 2 11⁄2 303
14 M30 1276 219 1346 44 76 51 13 38 137
15 11⁄4 493⁄4 85 ⁄ 8 521⁄2 13⁄4 3 2 5⁄ 8 11⁄2 420
15 M30 1264 219 1334 44 76 51 16 38 191
16 11⁄2 60 85 ⁄ 8 627⁄8 2 3 21⁄2 3⁄ 4 13⁄4 550
16 M36 1524 219 1597 51 76 64 19 44 249
17 13⁄4 681⁄2 85 ⁄ 8 711⁄8 25⁄8 3 21⁄2 3⁄ 4 2 733
17 M42 1740 219 1807 67 76 64 19 51 332
18 2 66 123⁄4 697⁄8 27⁄8 4 3 3⁄ 4 23⁄8 1122
18 M48 1676 324 1775 73 102 76 19 60 509
19 21⁄4 753⁄4 123⁄4 801⁄8 31⁄2 41⁄2 3 3⁄ 4 25⁄8 1310
19 M56 1924 324 2035 89 114 76 19 67 594
20 21⁄2 90 123⁄4 943⁄8 37⁄8 41⁄2 4 1 27 ⁄ 8 1872
20 M64 2286 324 2397 98 114 102 25 73 849
21 23⁄4 100 123⁄4 1043⁄8 41⁄4 41⁄2 4 1 31 ⁄ 8 2052
21 M72 2540 324 2651 108 114 102 25 79 931
22 3 1241⁄2 123⁄4 1293⁄8 41 ⁄ 4 5 4 1 33⁄8 2831
22 M80X6 3162 324 3286 108 127 102 25 86 1284

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load,
Cold Load, Movement and Direction of Movement (from the Cold/Installed
position to the Hot/Operating position), and Hanger Identification Number
F A
(if any). Specify any other optional feature(s) as necessary.
C
Pins for attachment to the structure are not included with the unit and must
be ordered separately as a Figure 291, shown on page 8 of this catalog. For
A-A ordering specify Figure Number, pin diameter and finish.
For corrosion resistant units specify the Figure Number with the letter prefix
“C”, e.g. C910
For metric units specify the Figure Number with the letter prefix “M” e.g.
M910 or MC910.

LUG HOLE
DIAMETER
DIMENSIONS TEMPERATURE LOADS WEIGHT
INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

39
VARIABLE SPRING SUPPORTS

SERIES 980 - TYPE C

S A MIN. HGT.
T ROD CASE CASE ROD THD. OF LUG APPROX.
R SIZE LGTH. DIA. T’OUT ENGM'T PIN HOLE WGT
H SIZE A B C E F H R S T DIA. EACH
A 0 1⁄ 2 27 4 283⁄8 7⁄ 8 11⁄2 11 ⁄ 4 11⁄4 1⁄ 4 11⁄ 16 32
0 M12 686 102 721 22 38 32 32 6 17 15
0
1 1⁄ 2 293⁄8 4 303⁄4 7⁄ 8 11⁄2 11 ⁄ 4 11⁄4 1⁄ 4 11⁄ 16 34
1 1/2
1 M12 746 102 781 22 38 32 32 6 17 15
2 1⁄ 2 303⁄8 4 313⁄4 7⁄ 8 11⁄2 11 ⁄ 4 11⁄4 1⁄ 4 11⁄ 16 38
3 2 M12 772 102 806 22 38 32 32 6 17 17
3 1⁄ 2 291⁄2 59⁄16 307⁄8 7⁄ 8 11⁄2 11 ⁄ 4 11⁄4 1⁄ 4 11⁄ 16 52
3 M12 749 141 784 22 38 32 32 6 17 24
4 1/2

6 4 1⁄ 2 32 59⁄16 333⁄8 7⁄ 8 11⁄2 11 ⁄ 4 11⁄4 1⁄ 4 11⁄ 16 62

4 M12 813 141 848 22 38 32 32 6 17 28
7 1/2

5 1⁄ 2 343⁄4 59⁄16 361⁄8 7⁄ 8 11⁄2 11 ⁄ 4 11⁄4 1⁄ 4 11⁄ 16 68

9
5 M12 883 141 918 22 38 32 32 6 17 31
LD LBS DEFL IN 6 5⁄ 8 34 65⁄8 351⁄4 11⁄8 11⁄2 11 ⁄ 4 11⁄4 1⁄ 4 13⁄ 16 90
FIG. NO.

CALIBRATED LOAD
SIZE TYPE

TRAVEL
6 M16 864 168 895 29 38 32 32 6 21 41
MARK NUMBER SERIAL NUMBER

7 5⁄ 8 377⁄8 65⁄8 381⁄4 11⁄8 11⁄2 11 ⁄ 4 11⁄4 1⁄ 4 13⁄ 16 88

7 M16 962 168 972 29 38 32 32 6 21 40
8 5⁄ 8 393⁄4 65⁄8 41 11⁄8 11⁄2 11 ⁄ 4 11⁄4 1⁄ 4 13⁄ 16 106
8 M16 1010 168 1041 29 38 32 32 6 21 48
9 3⁄ 4 397⁄8 85⁄8 411⁄4 11⁄4 11⁄2 11 ⁄ 4 11⁄4 3⁄ 8 15⁄ 16 170
9 M20 1013 219 1048 32 38 32 32 10 24 77
10 3⁄ 4 447⁄8 85⁄8 461⁄4 11⁄4 11⁄2 11 ⁄ 4 11⁄4 3⁄ 8 15⁄ 16 187
10 M20 1140 219 1175 32 38 32 32 10 24 85
11 3⁄ 4 361⁄8 85⁄8 371⁄2 11⁄4 11⁄2 11 ⁄ 4 11⁄4 3⁄ 8 15⁄ 16 219
E 11 M20 918 219 953 32 38 32 32 10 24 99
B 12 1 391⁄4 85⁄8 411⁄8 15⁄8 2 11 ⁄ 2 15⁄8 1⁄ 2 11 ⁄ 4 253
12 M24 997 219 1045 41 51 38 41 13 32 115
13 1 491⁄2 85⁄8 513⁄8 15⁄8 2 11 ⁄ 2 15⁄8 1⁄ 2 11 ⁄ 4 287
13 M24 1257 219 1305 41 51 38 41 13 32 130
14 11⁄4 501⁄4 85⁄8 53 13⁄4 3 2 2 1⁄ 2 11 ⁄ 2 303
14 M30 1276 219 1346 44 76 51 51 13 38 137
15 11⁄4 493⁄4 85⁄8 521⁄2 13⁄4 3 2 2 5⁄ 8 11 ⁄ 2 420
15 M30 1264 219 1334 44 76 51 51 16 38 191
16 11⁄2 60 85⁄8 627⁄8 2 3 21 ⁄ 2 23⁄8 3⁄ 4 13 ⁄ 4 550
16 M36 1524 219 1597 51 76 64 60 19 44 249
17 13⁄4 681⁄2 85⁄8 711⁄8 25⁄8 3 21 ⁄ 2 23⁄8 3⁄ 4 2 733
17 M42 1740 219 1807 67 76 64 60 19 51 332
18 2 66 123⁄4 697⁄8 27⁄8 4 3 27 ⁄ 8 3⁄ 4 23 ⁄ 8 1122
18 M48 1676 324 1775 73 102 76 73 19 60 509
19 21⁄4 753⁄4 123⁄4 801⁄8 31⁄2 41⁄2 3 31 ⁄ 8 3⁄ 4 25 ⁄ 8 1310
19 M56 1924 324 2035 89 114 76 79 19 67 594
20 21⁄2 90 123⁄4 943⁄8 37⁄8 41⁄2 4 33 ⁄ 8 1 27⁄8 1872
20 M64 2286 324 2397 98 114 102 86 25 73 849
21 23⁄4 100 123⁄4 1043⁄8 41⁄4 41⁄2 4 35 ⁄ 8 1 31⁄8 2052
21 M72 2540 324 2651 108 114 102 92 25 79 931
22 3 1241⁄2 123⁄4 1293⁄8 41⁄4 5 4 37 ⁄ 8 1 33⁄8 2831
22 M80x6 3162 324 3286 108 127 102 98 25 86 1284

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold
Load, Movement and Direction of Movement (from the Cold/Installed position to
F A the Hot/Operating position), and Hanger Identification Number (if any). Specify
C any other optional feature(s) as necessary.
Pins for attachment to the structure are not included with the unit and must be
A-A ordered separately as a Figure 291, shown on page 8 of this catalog. For ordering
specify Figure Number, pin diameter and finish.
For corrosion resistant units specify the Figure Number with the letter prefix “C”,
e.g. C910
For metric units specify the Figure Number with the letter prefix “M” e.g. M910
or MC910.

LUG HOLE
DIAMETER

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

40
 VARIABLE SPRING SUPPORTS

A
SERIES 980 TYPE D
ROD, NUTS, ROD CASE CASE ROD HGT. OF APPROX.
AND WASHER HANGER SIZE LENGTH DIA. TAKEOUT SPACER WEIGHT
NOT FURNISHED SIZE A B C E M EACH
M 0 1⁄ 2 27 4 361⁄4 81⁄2 32
0 M12 686 102 921 216 15
1 1⁄ 2 293⁄8 4 385⁄8 81⁄2 34
0

1 M12 746 102 981 216 15

1 1/2
2 1⁄ 2 303⁄8 4 395⁄8 81⁄2 38
2 M12 772 102 1006 216 17
3
3 1⁄ 2 291⁄2 59⁄16 383⁄4 81⁄2 52
4 1/2
3 M12 749 141 984 216 24
4 1⁄ 2 32 59⁄16 411⁄4 81⁄2 62
6
4 M12 813 141 1048 216 28
7 1/2
5 1⁄ 2 343⁄4 59⁄16 44 81⁄2 68
5 M12 883 141 1118 216 31
9
6 5⁄ 8 34 65⁄8 431⁄2 81⁄2 90
LD LBS

FIG. NO.
DEFL IN

SIZE TYPE
6 M16 864 168 1105 216 41
CALIBRATED LOAD

MARK NUMBER
TRAVEL

SERIAL NUMBER
7 5⁄ 8 377⁄8 65 ⁄ 8 471⁄2 81⁄2 88
7 M16 962 168 1207 216 40
8 5⁄ 8 393⁄4 65 ⁄ 8 491⁄2 81⁄2 106
8 M16 1010 168 1257 216 48
9 3⁄ 4 397⁄8 85 ⁄ 8 491⁄2 83⁄8 170
9 M20 1013 219 1257 213 77
10 3⁄ 4 447⁄8 85 ⁄ 8 543⁄4 85⁄8 187
E
10 M20 1140 219 1391 219 85
11 3⁄ 4 361⁄8 85 ⁄ 8 46 85⁄8 219
11 M20 918 219 1168 219 99
B 12 1 391⁄4 85 ⁄ 8 493⁄4 9 253
12 M24 997 219 1264 229 115
13 1 491⁄2 85 ⁄ 8 60 9 287
13 M24 1257 219 1524 229 130
14 11⁄4 501⁄4 85 ⁄ 8 611⁄2 91⁄4 303
14 M30 1276 219 1562 235 137
15 11⁄4 493⁄4 85 ⁄ 8 603⁄4 91⁄8 420
15 M30 1264 219 1543 232 191
16 11⁄2 60 85⁄8 713⁄4 91⁄2 550
16 M36 1524 219 1822 241 249
17 13⁄4 681⁄2 85 ⁄ 8 807⁄8 93⁄4 733
17 M42 1740 219 2054 248 332
18 2 66 123⁄4 79 10 1122
18 M48 1676 324 2007 254 509
19 21⁄4 753⁄4 123⁄4 89 101⁄4 1310
19 M56 1924 324 2261 260 594
20 21⁄2 90 123⁄4 1041⁄4 101⁄2 1872
20 M64 2286 324 2648 267 849
21 23⁄4 100 123⁄4 1147⁄8 103⁄4 2052
21 M72 2540 324 2918 273 931
22 3 1241⁄2 123⁄4 140 11 2831
22 M80x6 3162 324 3556 279 1284

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot

Load, Cold Load, Movement and Direction of Movement (from the
Cold/Installed position to the Hot/Operating position), and Hanger
Identification Number (if any). Specify any other optional feature(s)
as necessary.
C
For corrosion resistant units specify the Figure Number with the letter
prefix “C”, e.g. C980
For metric units specify the Figure Number with the letter prefix “M”
e.g. M980 or MC980.

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

41
VARIABLE SPRING SUPPORTS

SERIES 980 TYPE E

C ROD CASE CASE MIN. THD. APPROX.
HANGER SIZE LENGTH DIAMETER ENGM'T WEIGHT
MUST BE SIZE A B C F EACH
TACK WELDED R.H. AND L.H. 0 1⁄ 2 27 4 7⁄ 8 32
BY CUSTOMER 0
ROD AND NUT 0 M12 686 102 22 15
NOT FURNISHED, 1 1⁄ 2 293⁄8 4 7⁄ 8 34
1 1/2

LENGTH TO
SUIT CUSTOMER
1 M12 746 102 22 15
3

REQUIREMENT 2 1⁄ 2 303⁄8 4 7⁄ 8 38
4 1/2 2 M12 772 102 22 17
3 1⁄ 2 291⁄2 59⁄16 7⁄ 8 52
3 M12 749 141 22 24
6

7 1/2
4 1⁄ 2 32 59⁄16 7⁄ 8 62
9
4 M12 813 141 22 28
LD LBS DEFL IN
5 1⁄ 2 343⁄4 59⁄16 7⁄ 8 68
FIG. NO.

CALIBRATED LOAD
SIZE TYPE

TRAVEL
5 M12 883 141 22 31
MARK NUMBER SERIAL NUMBER

6 5⁄ 8 34 65⁄8 11⁄8 90
6 M16 864 168 29 41
7 5⁄ 8 377⁄8 65 ⁄ 8 11⁄8 88
7 M16 962 168 29 40
8 5⁄ 8 393⁄4 65 ⁄ 8 11⁄8 106
8 M16 1010 168 29 48
9 3⁄ 4 397⁄8 85 ⁄ 8 11⁄4 170
9 M20 1013 219 32 77
10 3⁄ 4 447⁄8 85 ⁄ 8 11⁄4 187
B 10 M20 1140 219 32 85
11 3⁄ 4 361⁄8 85 ⁄ 8 11⁄4 219
11 M20 918 219 32 99
12 1 391⁄4 85 ⁄ 8 15⁄8 253
12 M24 997 219 41 115
13 1 491⁄2 85 ⁄ 8 15⁄8 287
13 M24 1257 219 41 130
14 11⁄4 501⁄4 85 ⁄ 8 13⁄4 303
14 M30 1276 219 44 137
15 11⁄4 493⁄4 85 ⁄ 8 13⁄4 420
15 M30 1264 219 44 191
16 11⁄2 60 85⁄8 2 550
16 M36 1524 219 51 249
17 13⁄4 681⁄2 8 ⁄8
5 25⁄8 733
17 M42 1740 219 67 332
18 2 66 123⁄4 27⁄8 1122
18 M48 1676 324 73 509
19 21⁄4 753⁄4 123⁄4 31⁄2 1310
19 M56 1924 324 89 594
20 21⁄2 90 123⁄4 37⁄8 1872
20 M64 2286 324 98 849
21 23⁄4 100 123⁄4 41⁄4 2052
21 M72 2540 324 108 931
22 3 1241⁄2 123⁄4 41⁄4 2831
F 22 M80X6 3162 324 108 1284

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot

L.H. THD.
Load, Cold Load, Movement and Direction of Movement (from the
Cold/Installed position to the Hot/Operating position), and Hanger
12" Identification Number (if any). Specify any other optional feature(s)
MUST BE
TACK WELDED as necessary.
BY CUSTOMER
For corrosion resistant units specify the Figure Number with the letter
prefix “C”, e.g. C980
A F For metric units specify the Figure Number with the letter prefix “M”
TURNBUCKLE e.g. M980 or MC980.
IS FURNISHED

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

42
 VARIABLE SPRING SUPPORTS

SERIES 980 - TYPE F

CASE CASE BOTTOM BOLT OVERALL LOAD LOAD APPROX.
LNGTH. DIA. FLANGE BOTTOM CIRCLE LNGTH. X ** FLANGE FLANGE WGT.
SIZE B C BOLT DIA. FLANGE MIN. MAX. MIN. MAX. DIA. THICK. EACH
0 251⁄2 4 5⁄ 8 1⁄ 4 x 71⁄2 x 71⁄2 7 93⁄4 27 29 37⁄8 1⁄ 4 50
0 648 102 16 6 x 191 x 191 178 248 686 737 98 6 23
0

1 275⁄8 4 5⁄ 8 1⁄ 4 x 71⁄ 2 x 71⁄ 2 7 93⁄4 291⁄8 311⁄8 37⁄8 1⁄ 4 50

1 1/2
1 702 102 16 6 x 191 x 191 178 248 740 791 98 6 23
3
2 315⁄8 4 5⁄ 8 1⁄ 4 x 71⁄ 2 x 71⁄ 2 7 93⁄4 33 351⁄8 37⁄8 1⁄ 4 56
4 1/2 2 803 102 16 6 x 191 x 191 178 248 841 892 98 6 25
6
3 28 59⁄16 3⁄ 4 1⁄ 4 x 71⁄ 2 x 71⁄ 2 73⁄4 93⁄4 291⁄2 311⁄2 53⁄8 1⁄ 4 80
7 1/2
3 711 141 19 6 x 191 x 191 197 248 749 800 137 6 36
4 303⁄8 59⁄16 3⁄ 4 1⁄ 4 x 71⁄ 2 x 71⁄ 2 73⁄4 93⁄4 317⁄8 337⁄8 53⁄8 1⁄ 4 90
9

LD LBS DEFL IN
4 772 141 19 6 x 191 x 191 197 248 810 860 137 6 41
FIG. NO. SIZE

CALIBRATED LOAD
TYPE

TRAVEL

5 331⁄8 59⁄16 3⁄ 4 1⁄ 4 x 71⁄ 2 x 71⁄ 2 73⁄4 93⁄4 341⁄2 365⁄8 53⁄8 1⁄ 4 99

MARK NUMBER SERIAL NUMBER

5 841 141 19 6 x 191 x 191 197 248 876 930 137 6 45

6 323⁄4 65⁄8 3⁄ 4 3⁄ 8 x 9 x 9 91⁄4 101⁄2 34 361⁄4 63⁄8 1⁄ 4 130
6 832 168 19 10 x 229 x 229 235 267 864 921 162 6 59
7 38 65⁄8 3⁄ 4 3⁄ 8 x 9 x 9 91⁄4 101⁄2 397⁄8 417⁄8 63⁄8 1⁄ 4 129
7 965 168 19 10 x 229 x 229 235 267 1013 1064 162 6 59
8 383⁄4 65⁄8 3⁄ 4 3⁄ 8 x 9 x 9 91⁄4 101⁄2 40 42 63⁄8 1⁄ 4 140
8 984 168 19 10 x 229 x 229 235 267 1016 1067 162 6 64
9 38 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 40 42 83⁄8 1⁄ 2 240
X B 9 965 219 19 13 x 337 x 337 268 413 1016 1067 213 13 109
10 427⁄8 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 447⁄8 467⁄8 83⁄8 1⁄ 2 260
10 1089 219 19 13 x 337 x 337 268 413 1140 1191 213 13 118
11 341⁄8 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 361⁄8 381⁄8 83⁄8 1⁄ 2 280
11 867 219 19 13 x 337 x 337 268 413 918 968 213 13 127
12 365⁄8 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 385⁄8 405⁄8 83⁄8 1⁄ 2 310
12 930 219 19 13 x 337 x 337 268 413 981 1032 213 13 141
13 467⁄8 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 487⁄8 507⁄8 83⁄8 1⁄ 2 330
13 1191 219 19 13 x 337 x 337 268 413 1241 1292 213 13 150
14 473⁄8 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 493⁄8 513⁄8 83⁄8 1⁄ 2 340
14 1203 219 19 13 x 337 x 337 268 413 1254 1305 213 13 154
15 473⁄8 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 493⁄8 513⁄8 83⁄8 1⁄ 2 440
15 1203 219 19 13 x 337 x 337 268 413 1254 1305 213 13 200
16 561⁄2 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 581⁄2 601⁄2 83⁄8 1⁄ 2 560
16 1435 219 19 13 x 337 x 337 268 413 1486 1537 213 13 254
17 643⁄4 85⁄8 3⁄ 4 1⁄ 2 x 131⁄ 4 x 131⁄ 4 109⁄16 161⁄4 663⁄4 683⁄4 83⁄8 1⁄ 2 750
17 1645 219 19 13 x 337 x 337 268 413 1695 1746 213 13 340
18 615⁄8 123⁄4 3⁄ 4 5⁄ 8 x 171⁄ 4 x 171⁄ 4 153⁄4 21 633⁄4 653⁄4 121⁄2 1⁄ 2 1120
18 1565 324 19 16 x 438 x 438 400 533 1619 1670 318 13 508
19 705⁄8 123⁄4 3⁄ 4 5⁄ 8 x 171⁄ 4 x 171⁄ 4 153⁄4 21 723⁄4 743⁄4 121⁄2 1⁄ 2 1220
C 19 1794 324 19 16 x 438 x 438 400 533 1848 1899 318 13 553
20 835⁄8 123⁄4 3⁄ 4 5⁄ 8 x 171⁄ 4 x 171⁄ 4 153⁄4 21 861⁄4 881⁄4 121⁄2 1⁄ 2 1700
20 2124 324 19 16 x 438 x 438 400 533 2191 2242 318 13 771
21 927⁄8 123⁄4 3⁄ 4 5⁄ 8 x 171⁄ 4 x 171⁄ 4 153⁄4 21 95 97 121⁄2 1⁄ 2 1810
21 2359 324 19 16 x 438 x 438 400 533 2413 2464 318 13 821
22 1171⁄8 123⁄4 3⁄ 4 5⁄ 8 x 171⁄ 4 x 171⁄ 4 153⁄4 21 1191⁄4 1211⁄4 121⁄2 1⁄ 2 2450
22 2975 324 19 16 x 438 x 438 400 533 3029 3080 318 13 1111
LE

** The Installed Height should be the mid-point between the Maximum and Minimum Overall
C
IR

Height "X" , plus the thickness of the Load Flange, and plus any DOWN piping movement
C
LT

when applicable.
BO

Ordering: Specify Figure Number (Travel Series), Type, Size, Hot Load, Cold Load,
Movement and Direction of Movement (from the Cold/Installed position to the
Hot/Operating position), Dimension X (Installed Height) and Hanger Identification
Number (if any). Specify any other optional feature(s) as necessary.
For corrosion resistant units specify the Figure Number with the letter prefix “C”, e.g. C980
For metric units specify the Figure Number with the letter prefix “M” e.g. M980 or MC980.

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

43
VARIABLE SPRING SUPPORTS

C-C Rod Dimension

A F as specified
by customer
E P Ordering: Specify Figure Number (Travel Series),
W Type, Size, Total Load, Hot Load per spring, Cold
Load per spring, Movement and Direction of
Movement (from the Cold/Installed position to the
Hot/Operating position), Center to Center of Rods
dimension and Hanger Identification Number (if any).
Specify any other optional feature(s) as necessary.
B
For corrosion resistant units specify the Figure
Number with the letter prefix “C”, e.g. C980
For metric units specify the Figure Number with the
FIG. NO. SIZE TYPE FIG. NO. SIZE TYPE

CALIBRATED LOAD TRAVEL CALIBRATED LOAD TRAVEL

MARK NUMBER SERIAL NUMBER MARK NUMBER SERIAL NUMBER

DEFL IN LD LBS LD LBS DEFL IN

9
9

7 1/2

6
7 1/2

6
letter prefix “M” e.g. M980 or MC980.
4 1/2 4 1/2

3 3

1 1/2 1 1/2

0 0

FIGURE 980 TYPE G

ROD CASE CASE ROD MIN. THD. CHANNEL APPROX.
HANGER SIZE LENGTH DIAMETER TAKEOUT ENGM'T CHANNEL MAX. SPACING WEIGHT
SIZE A B C E F SIZE C-C W P EACH
0 1⁄ 2 27 4 13⁄8 7⁄ 8 C3 x 4.1 24 5⁄ 8 11⁄2 64
0 M12 686 102 35 22 C75 x 6 610 16 38 29
1 1⁄ 2 293⁄8 4 13⁄8 7⁄ 8 C3 x 4.1 24 5⁄ 8 11⁄2 68
1 M12 746 102 35 22 C75 x 6 610 16 38 31
2 1⁄ 2 303⁄8 4 13⁄8 7⁄ 8 C3 x 4.1 24 5⁄ 8 11⁄2 76
2 M12 772 102 35 22 C75 x 6 610 16 38 34
3 1⁄ 2 291⁄2 59⁄16 17⁄8 7⁄ 8 C3 x 4.1 30 3⁄ 4 2 104
3 M12 749 141 48 22 C75 x 6 762 19 51 47
4 1⁄ 2 32 59⁄16 17⁄8 7⁄ 8 C3 x 4.1 30 3⁄ 4 2 124
4 M12 813 141 48 22 C75 x 6 762 19 51 56
5 1⁄ 2 343⁄4 59⁄16 17⁄8 7⁄ 8 C3 x 4.1 30 3⁄ 4 2 136
5 M12 883 141 48 22 C75 x 6 762 19 51 62
6 5⁄ 8 34 65⁄8 17⁄8 11⁄8 C3 x 4.1 36 1 2 180
6 M16 864 168 48 29 C75 x 6 914 25 51 82
7 5⁄ 8 377⁄8 65⁄8 17⁄8 11⁄8 C3 x 4.1 36 1 2 176
7 M16 962 168 48 29 C75 x 6 914 25 51 80
8 5⁄ 8 393⁄4 65⁄8 17⁄8 11⁄8 C3 x 4.1 36 1 2 212
8 M16 1010 168 48 29 C75 x 6 914 25 51 96
9 3⁄ 4 397⁄8 85⁄8 27⁄8 11⁄4 C4 x 5.4 36 11⁄4 3 340
9 M20 1013 219 73 32 C100 x 8 914 32 76 154
10 3⁄ 4 447⁄8 85⁄8 27⁄8 11⁄4 C4 x 5.4 36 11⁄4 3 374
10 M20 1140 219 73 32 C100 x 8 914 32 76 170
11 3⁄ 4 361⁄8 85⁄8 27⁄8 11⁄4 C4 x 5.4 36 11⁄4 3 438
11 M20 918 219 73 32 C100 x 8 914 32 76 199
12 1 391⁄4 85⁄8 37⁄8 15⁄8 C5 x 6.7 36 11⁄2 4 506
12 M24 997 219 98 41 C130 x 10 914 38 102 230
13 1 491⁄2 85⁄8 37⁄8 15⁄8 C5 x 6.7 36 11⁄2 4 574
13 M24 1257 219 98 41 C130 x 10 914 38 102 260
14 11⁄4 501⁄4 85⁄8 41⁄8 13⁄4 C5 x 6.7 36 11⁄2 4 606
14 M30 1276 219 105 44 C130 x 10 914 38 102 275
15 11⁄4 493⁄4 85⁄8 41⁄8 13⁄4 C8 x 11.5 36 21⁄8 4 840
15 M30 1264 219 105 44 C200 x 17 914 54 102 381
16 11⁄2 60 85⁄8 37⁄8 2 C8 x 11.5 36 21⁄8 4 1100
16 M36 1524 219 98 51 C200 x 17 914 54 102 499
17 13⁄4 681⁄2 85⁄8 35⁄8 25⁄8 C8 x 11.5 36 21⁄8 4 1466
17 M42 1740 219 92 67 C200 x 17 914 54 102 665
18 2 66 123⁄4 37⁄8 27⁄8 C12 x 20.7 42 23⁄8 4 2244
18 M48 1676 324 98 73 C130 x 31 1067 60 102 1018
19 21⁄4 753⁄4 123⁄4 37⁄8 31⁄2 C12 x 20.7 42 25⁄8 4 2620
19 M56 1924 324 98 89 C130 x 31 1067 67 102 1188
20 21⁄2 90 123⁄4 37⁄8 37⁄8 C12 x 20.7 40 27⁄8 4 3744
20 M64 2286 324 98 98 C130 x 31 1016 73 102 1698
21 23⁄4 100 123⁄4 37⁄8 41⁄4 C15 x 33.9 48 31⁄8 4 4104
21 M72 2540 324 98 108 C380 x 50 1219 79 102 1862
22 3 1241⁄2 123⁄4 37⁄8 41⁄4 C15 x 33.9 48 33⁄8 4 5662
22 M80x6 3162 324 98 108 C380 x 50 1219 86 102 2568

DIMENSIONS TEMPERATURE LOADS WEIGHT

INCHES FAHRENHEIT POUNDS POUNDS
MILLIMETERS CELSIUS NEWTONS KILOGRAMS

44
 TECHNICAL INFORMATION

REFERENCE DATA – METRIC CONVERSION CHART

TO CONVERT FROM TO MULTIPLY BY ABBREVIATIONS
Angle degree radian (rad) 1.745329 x 10-2 AISC = American Institute of
radian (rad) degree 5.729578 x 10+1 Steel Construction
Area foot2 square meter (m2) 9.290304 x 10-2 AISI = American Iron & Steel
inch2 square meter (m2) 6.451600 x 10-4 Institute
circular mil square meter (m2) 5,067075 x 10-10 ANSI = American National
square centimeter (cm2) square inch (in2) 1.550003 x 10-1 Standards Institute
square meter (m2) foot2 1.076391 x 10+1 ASTM = American Society for
square meter (m2) inch2 1.550003 x 10+3 Testing & Materials
square meter (m2) circular mil 1.973525 x 10+9 AWWA = American Water Works
Bending lbf•ft newton meter (N•m) 1.355818 Association
Moment of lbf•in newton meter (N•m) 1.129848 x 10-1 Dia. = Diameter
Torque N•m lbf•ft 7.375621 x 10-1 Ft. = Feet
N•m lbf•in 8.850748 Ga = Gauge
I.D. = Inside Diameter
Force pounds-force (lbf) newtons (N) 4.448222 In. = Inch
Length foot (ft) meter (m) 3.048000 x 10-1 Lbs. = Pounds
inch (in) meter (m) 2.540000 x 10-2 Max. = Maximum
mil meter (m) 2.540000 x 10-5 Min. = Minimum
inch (in) micrometer (µm) 2.540000 X 10+4 MSS = Manufacturers'
meter (m) foot (ft) 3.280840 Standardization Society
meter (m) inch (in) 3.937008 x 10+1 NFPA = National Fire Protection
meter (m) mil 3.937008 x 10+4 Association
micrometer (µm) Inch (in) 3.937008 x 10-5 O.D. = Outside Diameter
Mass ounce (avoirdupois) kilogram (kg) 2.834952 x 10-2 Oz. = Ounces
pound (avoirdupois) kilogram (kg) 4.535924 x 10-1 psi = Pounds Per Square Inch
on (short, 2000 lb) kilogram (kg) 9.071847 x 10+2 PVC = Poly Vinyl Chloride
on (long, 2240 lb) kilogram (kg) 1.016047 x 10+3 UNC = Unified Course Threads
kilogram (kg) ounce (avoirdupois) 3.527396 x 10+1 UNCR = Unified Course Threads
kilogram (kg) pound (avoirdupois) 2.204622 (Rounded Root)
kilogram (kg) ton (short 2000 lb) 1.102311 x 10-3
kilogram (kg) ton (long 2240 lb) 9.842064 x 10-4 METRIC SYMBOLS
Mass Per lb/ft kilogram per meter (kg/m) 1.488164 cm = centimeter
Unit Length lb/in kilogram per meter (kg/m) 1.785797 x 10+1 kg = kilogram
kg/m lb/ft 6.719689 x 10-1 kN = kilonewton
kg/m lb/in 5.599741 x 10-2 m = meter
Mass Per lb/ft3 kilogram per cubic meter (kg/m3) 1.601846 x 10-1 µm = micrometer
Unit Volume lb/in3 kilogram per cubic meter (kg/m3) 2.767990 x 10+4 mm = millimeter
kg/m3 lb/ft3 6.242797 x 10-2 MPa = megapascal
kg/m3 lb/in3 3 612730 x 10-5 N = newton
lbs/ft3 lbs/in3 1.728000 x 10+3 Nm = newton-meter
Pa = pascal
Mass Per lb/ft2 kilogram per square meter (kg/m2) 4882428
Area Unit kg/m2 pound per square foot (lb/ft2) 2.048161 x 10-1
Pressure or lbf/in2 (psi) pascal (Pa) 6.894757 x 10+3
Stress kip/in2 (ksi) pascal (Pa) 6-894757 x 10+6
lbf/in2 (psi) megapascals (MPa) 6.894757 x 10-3
pascal (Pa) pound force per sq. inch (psi) 1.450377 x 10-4
pascal (Pa) kip per sq. inch (ksi) 1.450377 x 10-7
megapascals (MPa) lbf/in2 (psi) 1-450377 x 10+2
Section section modulus S (in3) S (m3) 1.638706 x 10-5
Properties section modulus S (M3) S (in3) 6.102374 x 10+4
moment of inertia I (in4) 1 (m4) 4.162314 x 10-7
moment of inertia I (M4) I (in4) 2.402510 x 10+6
modulus of elasticity E (psi) E (Pa) 6.894757 x 10+3
modulus of elasticity E (Pa) E (psi) 1.450377 x 10-4
Temperature degree Fahrenheit degree Celsius t° C = t° F - 32) / 1.8
degree Celsius degree Fahrenheit t° F = 1.8 t° C + 32
Volume foot3 cubic meter (m3) 2.831685 x 10-2
inch3 cubic meter (m3) 1.638706 x 10-2
cubic centimeter (cm3) cubic inch (in3) 6.102374 x 10-2
cubic meter (m3) foot3 3.531466 x 10+1
cubic meter (m3) inch3 6.102376 x 10+4
gallon (U.S. liquid) cubic meter (m3) 3.785412 x 10-3

45
TECHNICAL INFORMATION

PIPE WEIGHTS FOR STANDARD AND HEAVY WEIGHT PIPE

PIPE DATA PIPE WEIGHT
Nominal Pipe Outside Dia. Wall Th’k w/ Gas, Air, Steam w/ Water
Pipe Size Schedule in mm in lbs/ft N/m lbs/ft N/m
1
⁄2" Std / 40 0.840 22 0.109 0.9 12 1.0 14
(15mm) XS / 80 0.147 1.1 16 1.2 17
3
⁄4" Std / 40 1.050 28 0.113 1.1 17 1.4 20
(20mm) XS / 80 0.154 1.5 22 1.7 24
1" Std / 40 1.315 34 0.133 1.7 25 2.1 30
(25mm) XS / 80 0.179 2.2 32 2.5 36
11⁄4" Std / 40 1.660 42 0.140 2.3 33 2.9 43
(32mm) XS / 80 0.191 3.0 44 3.6 52
11⁄2" Std / 40 1.900 48 0.145 2.7 40 3.6 53
(40mm) XS / 80 0.200 3.6 53 4.4 64
2" Std / 40 2.375 60 0.154 3.7 53 5.1 75
(50mm) XS / 80 0.218 5.0 73 6.3 92
21⁄2" Std / 40 2.875 75 0.203 5.8 85 7.9 115
(65mm) XS / 80 0.276 7.7 112 9.5 139
3" Std / 40 3.500 89 0.216 7.6 111 11 157
(80mm) XS / 80 0.300 10 150 13 191
31⁄2" Std / 40 4.000 102 0.226 9.1 133 13 195
(90mm) XS / 80 0.318 13 182 16 239
4" Std / 40 4.500 114 0.237 11 157 16 238
(100mm) XS / 80 0.337 15 219 20 291
5" Std / 40 5.563 141 0.258 15 213 23 340
(125mm) XS / 80 0.375 21 303 29 418
6" Std / 40 6.625 168 0.280 19 277 31 460
(150mm) XS / 80 0.432 29 417 40 582
8" Std / 40 8.625 219 0.322 29 417 50 733
(200mm) XS / 80 0.500 43 633 63 922
10" Std / 40 10.75 273 0.365 40 591 75 1090
(250mm) XS / 60 0.500 55 799 87 1271
12" Std 12.75 235 0.375 50 723 99 1439
(300mm) XS 0.500 65 955 112 1641
14" Std / 30 14.00 355.6 0.375 55 796 114 1669
(350mm) XS 0.500 72 1052 130 1892
16" Std / 30 16.00 406.4 0.375 63 913 142 2069
(400mm) XS / 40 0.500 83 1208 159 2326
18" Std 18.00 457.2 0.375 71 1030 172 2509
(450mm) XS 0.500 93 1364 192 2800
20" Std / 20 20.00 508.0 0.375 79 1147 205 2988
(500mm) XS / 30 0.500 104 1520 227 3313
24" Std / 20 24.00 609.6 0.375 95 1381 279 4067
(600mm) XS 0.500 125 1831 306 4460
30" Std 30.00 762.0 0.375 119 1731 410 5983
(750mm) XS / 20 0.500 158 2299 444 6478
36" Std 36.00 914.4 0.375 143 2082 566 8256
(900mm) XS / 20 0.500 190 2766 607 8853
42" Std 42.00 1066.8 0.375 167 2433 746 10888
(1050mm) XS / 20 0.500 222 3234 794 11587

Pipe Weights are based on Carbon Steel pipe

46
 TECHNICAL INFORMATION

USEFUL WEIGHT FORMULAS

PIPE PLATE AND BAR
Weight (lb/ft) = 10.68 x T x (D - T) x F Weight (lb) = 0.2833 x T x W x L x F

PIPE CONTENTS ROUND ROD

Weight (lb/ft) = 0.3405 x G x (D - 2T)2 Weight (lb/ft) = 2.67D2

LEGEND MATERIAL WEIGHT FACTORS

D = Outside Diameter (inches) Carbon Steel & Cr-Mo ..................1.00
F = Material Weight Factor Aluminum ......................................0.35
G = Specific Gravity of Pipe Contents Brass ...............................................1.12
Normally 1.0 for water, 0 for air and steam. Cast lron .........................................0.91
L = Length (inches) Copper ............................................1.14
T = Pipe Wall, Plate, or Bar Thickness (inches) Ferritic stainless steel .....................0.95
W = Width (inches) Austenitic stainless steel ................1.02
Wrought iron ..................................0.98

CALCULATING OF PIPING INSULATION WEIGHT

The weight per foot of insulation is calculated by using the weight
factor “X” from the table below and multiplying by the insulation
density (lbs/cu-ft).

EXAMPLE: A 16" pipe with 31⁄2" of insulation is found to have a

weight factor of 1.49 (from table below). With an insulation density of
11 lb/cu-ft, the calculation for insulation weight is 1.49 x 11 = 16.39

INSULATION WEIGHT FACTOR – X

NOMINAL NOMINAL INSULATION THICKNESS
PIPE SIZE 1" 11⁄2" 2" 21⁄2" 3" 31⁄2" 4" 41⁄2" 5" 51⁄2" 6"
1 .057 .10 .16 .23 .31 .40
11⁄4 .051 .12 .15 .22 .30 .39
11⁄2 .066 .11 .21 .29 .38 .48
2 .080 .14 .21 .29 .37 .47 .59
21⁄2 .091 .19 .27 .36 .46 .58 .70 .83
3 .10 .17 .25 .34 .44 .56 .68 .81
31⁄2 .15 .23 .31 .41 .54 .66 .78 ... .97
4 .13 .21 .30 .39 .51 .63 .77 .96 1.10
5 .15 .24 .34 .45 .58 .71 .88 1.04 1.20
6 .17 .27 .38 .51 .64 .83 .97 1.13 1.34
8 .34 .47 .66 .80 .97 1.17 1.36 1.56 1.75
10 .43 .59 .75 .93 1.12 1.32 1.54 1.76 1.99
12 .50 .68 .88 1.07 1.28 1.52 1.74 1.99 2.24 2.50
14 .51 .70 .90 1.11 1.34 1.57 1.81 2.07 2.34 2.62
16 .57 .78 1.01 1.24 1.49 1.74 2.01 2.29 2.58 2.88
18 .64 .87 1.12 1.37 1.64 1.92 2.21 2.51 2.82 3.14
20 .70 .96 1.23 1.50 1.79 2.09 2.40 2.73 3.06 3.40
24 .83 1.13 1.44 1.77 2.10 2.44 2.80 3.16 3.54 3.92
General Formula: For pipe sizes not shown in the table above (special
O.D. pipe, etc.), use the following formula to determine the insulation weight:
Insulation Weight: (lb/ft) = 0.0218 x I x T x (T + D)
Where: I = Insulation density (lb/cu-ft)
T = Insulation thickness (inches)
D= Outside diameter of pipe (inches)

47
TECHNICAL INFORMATION

COMMON STRUCTURAL SHAPES USED FOR PIPE SUPPORTS

WEIGHT FLANGE SECTION
STRUCTURAL PER DEPTH WIDTH THICKNESS MODULUS
SHAPE SIZE FOOT IN IN IN IN3
L 11⁄2 x 11⁄2 x 1⁄4 2.3 11⁄2 11⁄2 1
⁄4 0.13
L 2 x 2 x 1⁄4 3.2 2 2 1
⁄4 0.25
L 21⁄2 x 21⁄2 x 1⁄4 4.1 21⁄2 21⁄2 1
⁄4 0.38
L 3 x 3 x 1⁄4 4.9 3 3 1
⁄4 0.58
ANGLE L 3 x 3 x 3⁄8 7.2 3 3 3
⁄8 0.83
L 3 x 3 x 1⁄2 9.4 3 3 1
⁄2 1.07
L 31⁄2 x 31⁄2 x 3⁄8 8.5 31⁄2 31⁄2 3
⁄8 1.15
L 4 x 4 x 3⁄8 9.8 4 4 3
⁄8 1.52
L 4 x 4 x 1⁄2 12.8 4 4 1
⁄2 1.97
L 5 x 5 x 1⁄2 16.2 5 5 1
⁄2 3.16
L 6 x 6 x 1⁄2 19.6 6 6 1
⁄2 4.61
L 6 x 6 x 3⁄4 28.7 6 6 3
⁄4 6.66
C 3 x 4.1 4.1 3 13⁄8 1
⁄4 1.10
C 4 x 5.4 5.4 4 15⁄8 5
⁄16 1.93
C 5 x 6.7 6.7 5 13⁄4 5
⁄16 3.00
CHANNEL C 6 x 8.2 8.2 6 17⁄8 5
⁄16 4.38
C 8 x 11.5 11.5 8 21⁄4 3
⁄8 8.14
C 10 x 15.3 15.3 10 25⁄8 7
⁄16 13.50
C 12 x 20.7 20.7 12 3 1
⁄2 21.50
C 15 x 33.9 33.9 15 33⁄8 5
⁄8 42.00
ST 2 x 2 x 1⁄4 5.4 2 2 1
⁄4 0.77
ST 3 x 3 x 1⁄4 8.8 3 3 1
⁄4 2.10
ST 4 x 4 x 1⁄4 12.2 4 4 1
⁄4 4.11
ST 4 x 4 x 3⁄8 17.3 4 4 3
⁄8 5.35
SQUARE ST 4 x 4 x 1⁄2 21.6 4 4 1
⁄2 6.13
TUBING ST 6 x 6 x 1⁄4 19.0 6 6 1
⁄4 10.10
ST 6 x 6 x 3⁄8 27.5 6 6 3
⁄8 13.90
ST 6 x 6 x 1⁄2 35.2 6 6 1
⁄2 16.80
ST 8 x 8 x 1⁄4 25.8 8 8 1
⁄4 18.80
ST 8 x 8 x 3⁄8 38.9 8 8 3
⁄8 26.40
ST 8 x 8 x 1⁄2 48.9 8 8 1
⁄2 32.90
S 4 x 7.7 7.7 4 25⁄8 5
⁄16 3.04
W 4 x 13 13.0 41⁄8 4 3
⁄8 5.46
W 6 x 12 12.0 6 4 1
⁄4 7.31
W 6 x 15 15.0 6 6 1
⁄4 9.72
W 6 x 20 20.0 61⁄4 6 3
⁄8 13.40
I-BEAM W 8 x 18 18.0 81⁄8 51⁄4 5
⁄16 15.20
W 8 x 24 24.0 77⁄8 61⁄2 3
⁄8 20.90
W 8 x 31 31.0 8 8 7
⁄16 27.50
W 10 x 22 22.0 101⁄8 53⁄4 3
⁄8 23.20
W 10 x 33 33.0 93⁄4 8 7
⁄16 35.00
W 12 x 26 26.0 121⁄4 61⁄2 3
⁄8 33.40
W 12 x 40 40.0 12 8 1
⁄2 51.90

Note: Flange thickness for I-Beam and Channel is the “mean” thickness

48
DISTRIBUTED BY:

Manufacturer of Pipe Hangers and Supports

434 Latigue Road
Waggaman, LA 70094
Phone - (504) 431-7722
Fax - (504) 431-7900
[email protected]

WWW.PHSIND.COM