Scribd
Upload
40 views8 pages

Drives Connected To SIMATIC S7 Via Profibus DP: A&Dmcpm2

This document discusses connecting drives to Siemens controllers via PROFIBUS DP and USS protocols. It describes how drives can connect to SIMATIC S7 PLCs and SIMADYN D controllers using these fieldbus protocols and the configuration tools like STEP 7. Specific CPUs, communication processors, and hardware modules are identified that provide PROFIBUS DP and USS master functionality for connecting drives.

Uploaded by

chochoroy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
40 views8 pages

Drives Connected To SIMATIC S7 Via Profibus DP: A&Dmcpm2

This document discusses connecting drives to Siemens controllers via PROFIBUS DP and USS protocols. It describes how drives can connect to SIMATIC S7 PLCs and SIMADYN D controllers using these fieldbus protocols and the configuration tools like STEP 7. Specific CPUs, communication processors, and hardware modules are identified that provide PROFIBUS DP and USS master functionality for connecting drives.

Uploaded by

chochoroy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Drives connected to SIMATIC S7

via PROFIBUS DP
‰ PROFIBUS DP is the system bus in SIMATIC S7

‰ CPUs with integrated DP master interfaces (S7-300, S7-400)

‰ Additional separate communication processors available for DP


(CP342-5, CP443-5)

‰ Configuring the distributed peripherals with STEP 7 (HW configuration)

‰ In the future the drive converters will be also parameterized using


STEP 7 (new SIMOVIS)

‰ STEP 7 functions (DVA_S7) to couple drives to S7-300

KOM_38E.ppt/Foil 1/1999
and S7-400 (prototypes available!)

([FHOOHQFH LQ
$XWRPDWLRQ 'ULYHV
6LHPHQV
Automation & Drives
A&D MC PM 2
Drives connected to SIMATIC S7
via PROFIBUS DP
‰ PROFIBUS DP is the system bus in SIMATIC S7

‰ CPUs with integrated DP master interfaces (S7-300, S7-400)

‰ Additional separate communication processors available for DP


(CP342-5, CP443-5)

‰ Configuring the distributed peripherals with STEP 7 (HW configuration)

‰ In the future the drive converters will be also parameterized using


STEP 7 (new SIMOVIS)

‰ STEP 7 functions (DVA_S7) to couple drives to S7-300

KOM_38E.ppt/Foil 1/1999
and S7-400 (prototypes available!)

([FHOOHQFH LQ
$XWRPDWLRQ 'ULYHV
6LHPHQV
Automation & Drives
A&D MC PM 2

3.8-1
Drives connected to SIMATIC S7
via the USS protocol
‰ USS driver available for S7-200 (STEP 7 / MICRO)

‰ STEP 7 functions (DVA_S7) to couple drives to S7-300


with CP340 (prototypes available)

‰ STEP 7 functions (DVA_S7) are scheduled for availability to couple


drives to S7-400 with CP441-1 (prototypes will be available from approx.
2/97 , availability CP441-1, scheduled 12/96)

‰ Special driver for USS and CP for USS in SIMATIC S7 are planned

KOM_38E.ppt/Foil 2/1999
([FHOOHQFH LQ
$XWRPDWLRQ 'ULYHV
6LHPHQV
Automation & Drives
A&D MC PM 2
Drives connected to SIMATIC S7
via the USS protocol
‰ USS driver available for S7-200 (STEP 7 / MICRO)

‰ STEP 7 functions (DVA_S7) to couple drives to S7-300


with CP340 (prototypes available)

‰ STEP 7 functions (DVA_S7) are scheduled for availability to couple


drives to S7-400 with CP441-1 (prototypes will be available from approx.
2/97 , availability CP441-1, scheduled 12/96)

‰ Special driver for USS and CP for USS in SIMATIC S7 are planned

KOM_38E.ppt/Foil 2/1999
([FHOOHQFH LQ
$XWRPDWLRQ 'ULYHV
6LHPHQV
Automation & Drives
A&D MC PM 2

3.8-2
Drives connected to SIMADYN D
via PROFIBUS DP
‰ Hardware requirements: CS7 with SS52 submodule

‰ SS52: PROFIBUS DP master- or slave functionality

‰ DP configuration of master and slave integrated in COM ET 200


Windows

‰ Central block available in SIMADYN for DP communications


(configuring baud rate, station number etc.)

‰ Send/receive blocks support net data transfer with drives

‰ Baud rates up to 12 Mbaud possible

KOM_38E.ppt/Foil 3/1999
([FHOOHQFH LQ
$XWRPDWLRQ 'ULYHV
6LHPHQV
Automation & Drives
A&D MC PM 2
Drives connected to SIMADYN D
via PROFIBUS DP
‰ Hardware requirements: CS7 with SS52 submodule

‰ SS52: PROFIBUS DP master- or slave functionality

‰ DP configuration of master and slave integrated in COM ET 200


Windows

‰ Central block available in SIMADYN for DP communications


(configuring baud rate, station number etc.)

‰ Send/receive blocks support net data transfer with drives

‰ Baud rates up to 12 Mbaud possible

KOM_38E.ppt/Foil 3/1999
([FHOOHQFH LQ
$XWRPDWLRQ 'ULYHV
6LHPHQV
Automation & Drives
A&D MC PM 2

3.8-3
Drives connected to SIMADYN D
via USS protocol
‰ Hardware prerequisite: CS7 with SS4 submodule

‰ SS4: USS master functionality

‰ Central block available in SIMADYN for USS communications

‰ Send/receive block support net data transfer with drives

‰ 5 possible baud rates up to 187.5 kbaud

KOM_38E.ppt/Foil 4/1999
([FHOOHQFH LQ
$XWRPDWLRQ 'ULYHV
6LHPHQV
Automation & Drives
A&D MC PM 2
Drives connected to SIMADYN D
via USS protocol
‰ Hardware prerequisite: CS7 with SS4 submodule

‰ SS4: USS master functionality

‰ Central block available in SIMADYN for USS communications

‰ Send/receive block support net data transfer with drives

‰ 5 possible baud rates up to 187.5 kbaud

KOM_38E.ppt/Foil 4/1999
([FHOOHQFH LQ
$XWRPDWLRQ 'ULYHV
6LHPHQV
Automation & Drives
A&D MC PM 2

3.8-4

You might also like