Scribd
Upload
263 views2 pages

Asm

The document describes an addressable signal module that connects to a control unit and provides notification circuits. It can be configured to support speakers or notification appliances and provides supervised power for alarms. It has status LEDs and can be programmed through a handheld programmer or control panel.

Uploaded by

Christopher Nicolas A. Illanes Fernandez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
263 views2 pages

Asm

The document describes an addressable signal module that connects to a control unit and provides notification circuits. It can be configured to support speakers or notification appliances and provides supervised power for alarms. It has status LEDs and can be programmed through a handheld programmer or control panel.

Uploaded by

Christopher Nicolas A. Illanes Fernandez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Effective: August 2000

ADDRESSABLE SIGNAL
MODULE TM

74.234

FEATURES
• Full-digital communications
• Addressable notification-appliance circuit
(NAC)
• Class A, Style Z or Class B, Style Y wiring
• Field-configurable for 24-VDC notification
appliances or 25/70.7 Vrms speakers
• Status indicator
• Supervises power for notification appliances
• UL Listed / FM Approved

DESCRIPTION
The SmartOne™ Addressable Signal Module (ASM) is a notifi-
cation-appliance circuit that connects to the signaling line cir-
cuit of a compatible control unit. The ASM is an intelligent field
device that contains its own microprocessor, 4K of memory and
the necessary electronics to provide either 24 VDC for conven- • Alarm contact position
tional notification-appliances or 25/70.7Vrms for speakers. • Communications with the control unit
• Internal power supply
PROGRAMMING • Connections to external power supply for notification-
appliances
Each ASM can be configured to support speakers or audible- • Memory status
visual notification appliances, and Class B, Style Y or Class A, Module supervision prevents switching audible or audio power
Style Z operation. The module can also be programmed to sup- into a shorted circuit.
port water flow, walk test, and drill modes. As with any SmartOne
device, addressing can be implemented from the hand-held pro-
STATUS LED
grammer (P/N 74-100013-001) or the control panel keypad/menu.
The Module can also be alarm tested upon command from the A status LED is mounted on the unit and indicates the module’s
control unit. Module faults are individually reported to compat- status by a two-second (alarm) or nine-second (normal) flash
ible control units by module address, fault type, and fault-loca- interval. A trouble condition stops the flashing.
tion message.
INSTALLATION
OPERATION
The unit can be mounted in a 4" x 4” electrical box. Terminal
Once installed and configured, the ASM requires little or no connections support wiring from #18 AWG (1.0 mm2) to #12
maintenance. Operation can be changed on site using on- AWG (4.0 mm2). The size of the wires used will determine elec-
board switches and jumpers. trical box depth.

SUPERVISION The depth of the electrical box is determined per Article 370 of
the National Electrical Code. ASM volume is 8.94 cubic-inches.
The ASM provides a fully supervised notification-appliance For ease of wiring, especially with solid wire, an extension ring
circuit for connection to either 24 VDC audible/visual appli- must be used.
ances or 25/70.7 Vrms speakers. The module provides con-
tinuous internal supervision of:

1
SPECIFICATIONS AUDIO CIRCUIT OUTPUT
OUTPUT CIRCUIT CHARACTERISTICS • 25 or 70.7 Vrms, 20 W (max.), non-power limited,
reverse polarity supervised
Output Current Rating: 2.0 A max. @ 30 VDC
POWER SUPPLY TROUBLE CIRCUIT END OF LINE
20 W @ 70.7 Vrms
RESISTOR
20 W @ 25.0 Vrms
• 4.7Kohms, 0.5 W
MAXIMUM LINE RESISTANCES (#12 AWG WIRE)
OPERATING TEMPERATURE RANGE
L o ad R esistan ce L e n g th • -31° F to 151° F, (-35° C to 66°C)
(a m p s ) (o h m s ) (ft.) OPERATING HUMIDITY RANGE
0.2 20.0 12.0K • 0 to 95%, non-condensing

0.5 8.0 5.0K


ORDERING INFORMATION
1.0 4.0 2.5K
ADDRESSABLE SIGNAL MODULE
1.5 2.7 1.6K • 70-200200-001
2.0 2.0 1.2K FRONT COVER PLATE (PROVIDED WITH MODULE)
• 06-235714-001
INTERNAL INSULATOR (PROVIDED WITH MODULE)
TECHNICAL INFORMATION • 06-235714-001
PHYSICAL DESCRIPTION
• Single printed circuit board secured to a universal plate WIRING DIAGRAM
with insulator
MOUNTING
• A 4", 2-1/8" deep (for #18 AWG) or 4-11/16", 2-1/8" deep
(for #12 AWG) standard, square electrical box is used.
Wiring specifications are recommended as minimums
for ease of wiring. See National Electrical Code (370).
CONSTRUCTION
• High impact polymer housing with 16 gauge mounting
bracket
SHIPPING WEIGHT
• 10.5oz (298g)
CURRENT DRAW
• 500 uA in standby or alarm
OPERATING VOLTAGE RANGE
• 16.5 to 27.5 VDC
• 24 VDC nominal
NOTIFICATION-APPLIANCE CIRCUIT END OF LINE
RESISTOR
• 47K ohms, 0.5 W
NOTIFICATION-APPLIANCE CIRCUIT OUTPUT
• 24 VDC, 2 A (max.), power limited, reverse polarity
supervised
Refer to installation instructions (P/N 06-235717-001) for additional information

This literature is provided for informational purposes only. KIDDE-FENWAL,INC. assumes no


responsibility for the product's suitability for a particular application. The product must be prop-
TM erly applied to work correctly.
If you need more information on this product, or if you have a particular problem or question,
contact KIDDE-FENWAL INC., Ashland, MA 01721. Telephone: (508) 881-2000

©
74.234 10/99 Kidde Fenwal Inc. Printed in USA
KIDDE-FENWAL INC.
400 MAIN STREET, ASHLAND, MA 01721
TEL: (508) 881-2000 FAX: (508) 881-8920

You might also like