Butterfly Valves

Butterfly Valve Type GD-6 – Standard design

General:

JASTA´s butterfly valve of the type GD-6 is a valve that is clamped between flanges. Thanks
to the diversity of available materials, this valve can be employed in almost all media and
industry sectors. Its functionality is, however, not restricted to one control- or throttle function:
using the variant of the highest density shows a leakage rate of only 0.02% of Kv 90°.
Particularly in case of high temperatures in the low-pressure area and also with regard to
many other fields of applications, this “shut-off function” ensures high efficiency, so that the
use of much more expensive double- or triple eccentric shut-off valves becomes superfluous.

Fields of applications:

Melting plants, foundries, cement mills, crematories, industrial furnaces (for iron, steel,
aluminium, stainless steel), glassworks, plants (for Rockwool, gas concrete etc.), ceramic
furnaces, drying- and dust removal installations, gas turbines, annealing systems, high
temperature furnace engineering etc.

Specification (standard design)

Customized solutions and modifications are available. Please enquire separate.

DN 15 up to 3000
Type Wafer-type
DIN PN-6; PN-10, PN-16, ANSI 150 lbs.
Operating temperatures -40°C up to + 1000°C
Leakage rates Approx. 2% to 0,02 % of Kv 90°
Actuation modes Electric, pneumatic, hydraulic, hand
Material combinations Cast iron/steel/stainless steel/aluminium
Connection flange Possible according ISO 5211
Packing, o-rings, TA-Air (German Clean Air Act)
Shaft sealing
possible
Friction bearing, flange bearing, external
Shaft bearing
bearing possible
Progr. locking mechanism Possible with specific hand actuation.

JASTA-ARMATUREN GmbH & Co.KG Subject to change without notice

Levinstrasse 156-160 – 45356 Essen

www.jasta-armaturen.de © by JASTA-ARMATUREN – Stand: 02/2011

Butterfly Valves

Butterfly Valves – Sealing modes

With landing bar and flexible sealing coated on 3 sides

With landing bar and flexible sealing

coated on 3 sides.
Leakage rate: Approx. 0,05 to 0,02 % of
Kv 90° - depending on design

With landing bar

With landing bar.

Leakage rate: Approx. 0,5 to 0,2 % of Kv
90° - depending on design.

Without landing bar Mögliche Einsatzbereiche:

Without landing bar.

Leakage rate: Approx. 1 % of KV 90°

Mögliche Einsatzbereiche:

JASTA-ARMATUREN GmbH & Co.KG Subject to change without notice

Levinstrasse 156-160 – 45356 Essen

www.jasta-armaturen.de © by JASTA-ARMATUREN – Stand: 02/2011

Butterfly Valves

GD-6 with locking device – Dimensions/weighs

The weights refer to the valves in standard design.

DN B C D d G H [k g ]
15 25 60 44 8 100 130
20 25 60 44 8 100 130
25 25 75 60 10 100 145
32 25 80 67 10 100 150
40 25 83 75 10 100 153
50 25 85 85 10 100 155
65 25 95 105 12 120 165
80 30 105 120 12 120 175
100 30 115 140 12 120 185
125 35 135 170 12 145 210
150 40 150 195 15 145 225
175 40 165 225 15 145 240
200 40 175 255 15 145 250
225 40 185 280 15 145 260
250 40 220 310 15 155 305
300 45 240 360 20 155 325
350 45 290 415 25 210 405
400 50 335 465 30 210 450
450 50 360 520 30 210 475
500 55 400 570 30 210 515
550 60 420 620 30 210 535
600 65 460 675 30 210 460
700 70 495 780 35 *3 *2
800 75 545 880 40 *3 *2
900 80 600 980 40 *3 *2
1000 90 670 1080 45 *3 *2
1100 90 730 1180 45 *3 *2
1200 90 790 1295 45 *3 *2
1400 *1 920 1510 *1 *3 *2
1600 *1 1010 1710 *1 *3 *2
1800 *1 1120 1920 *1 *3 *2
2000 *1 1230 2130 *1 *3 *2

*1= Depending on design

*2= With fine adjustment type RDST-32 or worm gear Subject to change without notice
*3= See Type RDST-32

© by JASTA-ARMATUREN – Stand: 02/2011

Butterfly Valves

GD-6 with mounting kit according ISO 5211 – Dimensions/weights

Flange connection and shaft

extension according customer’s
specification

The weights refer to the valves in standard design.

DN B C D d E [kg]
15 25 60 44 8 *
20 25 60 44 8 *
25 25 75 60 10 *
32 25 80 67 10 *
40 25 83 75 10 *
50 25 85 85 10 *
65 25 95 105 12 *
80 30 105 120 12 *
100 30 115 140 12 *
125 35 135 170 12 *
150 40 150 195 15 *
175 40 165 225 15 *
200 40 175 255 15 *
225 40 185 280 15 *
250 40 220 310 15 *
300 45 240 360 20 *
350 45 290 415 25 *
400 50 335 465 30 *
450 50 360 520 30 *
500 55 400 570 30 *
550 60 420 620 30 *
600 65 460 675 30 *
700 70 495 780 35 *
800 75 545 880 40 *
900 80 600 980 40 *
1000 90 670 1080 45 *
1100 90 730 1180 45 *
1200 90 790 1295 45 *

Subject to change without notice

*=Temperature depended
© by JASTA-ARMATUREN – Stand: 02/2011
Butterfly Valves

GD-6 with bare shaft – Dimensions/weights

The weights refer to the valves in standard design.

DN B C D d H [k g ]
15 25 60 44 8 140
20 25 60 44 8 140
25 25 75 60 10 155
32 25 80 67 10 160
40 25 83 75 10 163
50 25 85 85 10 165
65 25 95 105 12 175
80 30 105 120 12 185
100 30 115 140 12 195
125 35 135 170 12 225
150 40 150 195 15 240
175 40 165 225 15 255
200 40 175 255 15 265
225 40 185 280 15 275
250 40 220 310 15 320
300 45 240 360 20 340
350 45 290 415 25 420
400 50 335 465 30 465
450 50 360 520 30 490
500 55 400 570 30 530
550 60 420 620 30 550
600 65 460 675 30 475
700 70 495 780 35 625
800 75 545 880 40 675
900 80 600 980 40 730
1000 90 670 1080 45 800
1100 90 730 1180 45 860
1200 90 790 1295 45 920
1400 *1 920 1510 *1 1050
1600 *1 1010 1710 *1 1140
1800 *1 1120 1920 *1 1250
2000 *1 1230 2130 *1 1360

Subject to change without notice

*1= Depending on design

© by JASTA-ARMATUREN – Stand: 02/2011

Butterfly Valves

GD-6 with fine adjustment SFD-6 – Dimensions/weights

The weights refer to the valves in standard design.

DN B C D d G H [k g ]
15 25 60 44 8 100 135
20 25 60 44 8 100 135
25 25 75 60 10 100 150
32 25 80 67 10 100 155
40 25 83 75 10 100 158
50 25 85 85 10 100 160
65 25 95 105 12 120 165
80 30 105 120 12 120 175
100 30 115 140 12 120 185
125 35 135 170 12 145 215
150 40 150 195 15 145 225
175 40 165 225 15 145 240
200 40 175 255 15 145 250
225 40 185 280 15 145 260
250 40 220 310 15 155 305
300 45 240 360 20 155 325
350 45 290 415 25 210 405
400 50 335 465 30 210 450
450 50 360 520 30 210 475
500 55 400 570 30 210 515
550 60 420 620 30 210 535
600 65 460 675 30 210 460
700 70 495 780 35 *2 *3
800 75 545 880 40 *2 *3
900 80 600 980 40 *2 *3
1000 90 670 1080 45 *2 *3
1100 90 730 1180 45 *2 *3
1200 90 790 1295 45 *2 *3
1400 *1 920 1510 *1 *2 *3
1600 *1 1010 1710 *1 *2 *3
1800 *1 1120 1920 *1 *2 *3
2000 *1 1230 2130 *1 *2 *3

*1= Depending on design

*2= With fine adjustment RDST-32 or worm gear Subject to change without notice
*3= See Type RDST-32

© by JASTA-ARMATUREN – Stand: 02/2011

Butterfly Valves

GD-6 with fine adjustment RDST-32 – Dimensions/weights

The weights refer to the valves in standard design.

DN B C D d G H [k g ]
15 25 60 44 8 255 165
20 25 60 44 8 255 165
25 25 75 60 10 255 180
32 25 80 67 10 255 185
40 25 83 75 10 255 188
50 25 85 85 10 255 190
65 25 95 105 12 255 200
80 30 105 120 12 255 210
100 30 115 140 12 255 220
125 35 135 170 12 255 240
150 40 150 195 15 255 255
175 40 165 225 15 255 270
200 40 175 255 15 255 280
225 40 185 280 15 255 290
250 40 220 310 15 255 325
300 45 240 360 20 290 365
350 45 290 415 25 290 420
400 50 335 465 30 290 465
450 50 360 520 30 290 490
500 55 400 570 30 290 530
550 60 420 620 30 290 550
600 65 460 675 30 290 590
700 70 495 780 35 400 657
800 75 545 880 40 400 707
900 80 600 980 40 400 762
1000 90 670 1080 45 400 832
1100 90 730 1180 45 400 892
1200 90 790 1295 45 400 952
1400 *1 920 1510 *1 G e trie b e 1082
1600 *1 1010 1710 *1 G e trie b e 1172
1800 *1 1120 1920 *1 G e trie b e 1282
2000 *1 1230 2130 *1 G e trie b e 1392

Subject to change without notice

*1= Depending on design

© by JASTA-ARMATUREN – Stand: 02/2011

Butterfly Valves

GD-6 LB with external bearings – Abmessungen/Gewichte

The weights refer to the valves in standard design.

DN B C D d K H [kg]
25 25 75 60 10 160 315
32 25 80 67 10 160 320
40 25 83 75 10 160 323
50 25 85 85 10 160 325
65 25 95 105 12 160 335
80 30 105 120 12 160 345
100 30 115 140 12 160 355
125 35 135 170 12 160 385
150 40 150 195 15 160 400
175 40 165 225 15 160 415
200 40 175 255 15 160 425
225 40 185 280 15 160 435
250 40 220 310 15 160 480
300 45 240 360 20 160 500
350 45 290 415 25 160 580
400 50 335 465 30 160 625
450 50 360 520 30 160 650
500 55 400 570 30 160 690
550 60 420 620 30 160 710
600 65 460 675 30 160 635
700 70 495 780 35 160 785
800 75 545 880 40 160 835
900 80 600 980 40 160 890
1000 90 670 1080 45 160 960
1100 90 730 1180 45 160 1020
1200 90 790 1295 45 160 1080
1400 *1 920 1510 *1 160 1210
1600 *1 1010 1710 *1 160 1300
1800 *1 1120 1920 *1 160 1410
2000 *1 1230 2130 *1 160 1520

Subject to change without notice

*1= Depending on design

© by JASTA-ARMATUREN – Stand: 02/2011