ASTM DESIGNATION

REFERENCE: ASTM.ORG
Designation Title
C418 - 12 Standard Test Method for Abrasion Resistance of Concrete by Sandblasting

C779 / C779M - 12 Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces
Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the
C944 / C944M - 12
Rotating-Cutter Method
C1138M - 12 Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)

Standard Guide for Abrasion Resistance of Mortar Surfaces Using a Rotary Platform
C1803 - 15
Abraser
Additions
Designation Title
Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-
C226 - 12
Entraining Hydraulic Cement
Standard Specification for Processing Additions for Use in the Manufacture of
C465 - 19
Hydraulic Cements
C688 - 14 Standard Specification for Functional Additions for Use in Hydraulic Cements

Standard Test Method for Determination of Pack-Set Index of Portland and Blended
C1565 - 17
Hydraulic Cements

Aggregate Reactions in Concrete

Designation Title
Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in
C441 / C441M - 17
Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete
C586 - 11
Aggregates (Rock-Cylinder Method)
Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock
C1105 - 08a(2016)
Reaction
Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar
C1260 - 14
Method)
Standard Test Method for Determination of Length Change of Concrete Due to Alkali-
C1293 - 18a
Silica Reaction
Standard Test Method for Determining the Potential Alkali-Silica Reactivity of
C1567 - 13 Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar
Method)
Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in
C1778 - 16
Concrete
Aggregates
Designation Title
C29 / C29M - 17a Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate
C33 / C33M - 18 Standard Specification for Concrete Aggregates
C40 / C40M - 19 Standard Test Method for Organic Impurities in Fine Aggregates for Concrete
C70 - 13 Standard Test Method for Surface Moisture in Fine Aggregate
Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength
C87 / C87M - 17
of Mortar
Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or
C88 / C88M - 18
Magnesium Sulfate
Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral
C117 - 17
Aggregates by Washing
C123 / C123M - 14 Standard Test Method for Lightweight Particles in Aggregate
Standard Test Method for Relative Density (Specific Gravity) and Absorption of
C127 - 15
Coarse Aggregate
Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine
C128 - 15
Aggregate
Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate
C131 / C131M - 14
by Abrasion and Impact in the Los Angeles Machine
C136 / C136M - 14 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
C142 / C142M - 17 Standard Test Method for Clay Lumps and Friable Particles in Aggregates
Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate
C535 - 16
by Abrasion and Impact in the Los Angeles Machine
C566 - 13 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
C637 - 14 Standard Specification for Aggregates for Radiation-Shielding Concrete
Standard Descriptive Nomenclature of Constituents of Aggregates for Radiation-
C638 - 14
Shielding Concrete
C702 / C702M - 18 Standard Practice for Reducing Samples of Aggregate to Testing Size
Standard Test Method for Rapid Determination of the Methylene Blue Value for Fine
C1777 - 15
Aggregate or Mineral Filler Using a Colorimeter
Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers
C1797 - 17
for use in Hydraulic Cement Concrete
Air Entrainment
Designation Title
C185 - 15a Standard Test Method for Air Content of Hydraulic Cement Mortar
Application of Exterior Insulating and Finish Systems and Related
Products
Designation Title
Standard Practice for Application of Class PB Exterior Insulation and Finish Systems
C1397 - 13(2019)
(EIFS) and EIFS with Drainage
C1516 - 05(2017) Standard Practice for Application of Direct-Applied Exterior Finish Systems

C1535 - 05(2017) Standard Practice for Application of Exterior Insulation and Finish Systems Class PI

Chemical Admixtures
Designation Title
C233 / C233M - 18 Standard Test Method for Air-Entraining Admixtures for Concrete
C260 / C260M - 10a(2016) Standard Specification for Air-Entraining Admixtures for Concrete
Standard Test Method for Time of Setting of Concrete Mixtures by Penetration
C403 / C403M - 16
Resistance
C494 / C494M - 17 Standard Specification for Chemical Admixtures for Concrete
Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete
C796 / C796M - 12
Using Preformed Foam
Standard Specification for Foaming Agents Used in Making Preformed Foam for
C869 / C869M - 11(2016)
Cellular Concrete
C979 / C979M - 16 Standard Specification for Pigments for Integrally Colored Concrete
Standard Specification for Chemical Admixtures for Use in Producing Flowing
C1017 / C1017M - 13e1
Concrete
Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of
C1582 / C1582M - 11(2017)e1
Reinforcing Steel in Concrete
C1622 / C1622M - 10(2016)e1 Standard Specification for Cold-Weather Admixture Systems

Chemical Tests
Designation Title
Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated
C25 - 17
Lime
Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste
C400 - 98(2013)e1
Acid
C1271 - 99(2012) Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
Standard Test Method for Major and Trace Elements in Limestone and Lime by
C1301 - 95(2014) Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic
Absorption (AA)

Standard Test Method for Determination of Total Neutralizing Capability and

C1318 - 15a
Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)

Compositional Analysis
Designation Title
C114 - 18 Standard Test Methods for Chemical Analysis of Hydraulic Cement
Standard Test Method for Quantitative Determination of Phases in Portland Cement
C1356 - 07(2012)
Clinker by Microscopical Point-Count Procedure
Standard Test Method for Determination of the Proportion of Phases in Portland
C1365 - 18
Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis

C1872 - 18e2 Standard Test Method for Thermogravimetric Analysis of Hydraulic Cement

Standard Practice for Determination of Major and Minor Elements in Aqueous Pore
C1875 - 18 Solutions of Cementitious Pastes by Inductively Coupled Plasma Optical Emission
Spectroscopy (ICP-OES)

Concrete's Resistance to Fluid Penetration

 Designation Title
C642 - 13 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete
Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride
C1202 - 19
Ion Penetration
Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient
C1556 - 11a(2016)
of Cementitious Mixtures by Bulk Diffusion
Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-
C1585 - 13
Cement Concretes
Standard Test Method for Determina on of One-Point, Bulk Water Sorp on of Dried
C1757 - 13
Concrete
C1760 - 12 Standard Test Method for Bulk Electrical Conductivity of Hardened Concrete

Standard Test Method for Measurement of Mass Loss versus Time for One-
C1792 - 14
Dimensional Drying of Saturated Concretes

Coordination of Standards
Designation Title
C183 / C183M - 16 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
Standard Practice for Use of Apparatus for the Determination of Length Change of
C490 / C490M - 17
Hardened Cement Paste, Mortar, and Concrete
Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water
C511 - 13
Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
C778 - 17 Standard Specification for Standard Sand
Standard Specification for Reference Masses and Devices for Determining Mass and
C1005 - 19
Volume for Use in the Physical Testing of Hydraulic Cements
C1222 - 17 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement

Editorial and Terminology

Designation Title
C51 - 18 Standard Terminology Relating to Lime and Limestone (as used by the Industry)

Evaluation of Data (Joint C09 and C01)

Designation Title
Standard Practice for Preparing Precision and Bias Statements for Test Methods for
C670 - 15
Construction Materials
Standard Practice for Conducting an Interlaboratory Test Program to Determine the
C802 - 14
Precision of Test Methods for Construction Materials
Standard Practice for Conducting a Ruggedness Evaluation or Screening Program for
C1067 - 12
Test Methods for Construction Materials
 Standard Practice for Determining Variability of Concrete-Making Materials From a
C1451 - 18
Single Source
Evaluation of
Laboratories
Designation Title
Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in
C1077 - 17
Construction and Criteria for Testing Agency Evaluation

Fiber-Reinforced Concrete
Designation Title
C1116 / C1116M - 10a(2015) Standard Specification for Fiber-Reinforced Concrete
Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced
C1399 / C1399M - 10(2015)
Concrete
Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using
C1550 - 12a
Centrally Loaded Round Panel)
Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber
C1579 - 13
Reinforced Concrete (Using a Steel Form Insert)
Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using
C1609 / C1609M - 12
Beam With Third-Point Loading)
Standard Practice for Design of Journal Bearing Supports to be Used in Fiber
C1812 / C1812M - 15e1
Reinforced Concrete Beam Tests
Fineness
Designation Title
C188 - 17 Standard Test Method for Density of Hydraulic Cement
Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability
C204 - 18e1
Apparatus
Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325)
C430 - 17
Sieve

Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the
C786 / C786M - 17
300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods

Ground Slag
Designation Title
C989 / C989M - 18a Standard Specification for Slag Cement for Use in Concrete and Mortars

C1073 - 18 Standard Test Method for Hydraulic Activity of Slag Cement by Reaction with Alkali

Heat of Hydration
Designation Title
C186 - 17 Standard Test Method for Heat of Hydration of Hydraulic Cement
Standard Test Method for Measurement of Heat of Hydration of Hydraulic
C1702 - 17
Cementitious Materials Using Isothermal Conduction Calorimetry

Hydraulic Cement Grouts

 Designation Title
C937 - 16 Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete
Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate
C938 - 16
Concrete
Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow
C939 / C939M - 16a
Cone Method)
Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for
C940 - 16
Preplaced-Aggregate Concrete in the Laboratory
Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-
C941 - 16
Aggregate Concrete in the Laboratory
Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate
C942 - 15
Concrete in the Laboratory
Standard Practice for Making Test Cylinders and Prisms for Determining Strength and
C943 - 17
Density of Preplaced-Aggregate Concrete in the Laboratory
Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate
C953 - 17
Concrete in the Laboratory
Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer
C1181 / C1181M - 17
Machinery Grouts
Standard Test Method for Flowability and Bearing Area of Chemical-Resistant
C1339 / C1339M - 18
Polymer Machinery Grouts
Standard Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon
C1741 - 18
Grout

Hydraulic Cements for General Concrete Construction

Designation Title
C10 / C10M - 14 Standard Specification for Natural Cement
C150 / C150M - 19a Standard Specification for Portland Cement
C595 / C595M - 19 Standard Specification for Blended Hydraulic Cements
C1157 / C1157M - 17 Standard Performance Specification for Hydraulic Cement

Lightweight Aggregates and Concrete

Designation Title
C330 / C330M - 17a Standard Specification for Lightweight Aggregates for Structural Concrete
C331 / C331M - 17 Standard Specification for Lightweight Aggregates for Concrete Masonry Units
C332 - 17 Standard Specification for Lightweight Aggregates for Insulating Concrete
C495 / C495M - 12 Standard Test Method for Compressive Strength of Lightweight Insulating Concrete
Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight
C513 / C513M - 11e1
Insulating Concrete for Compressive Strength
C567 / C567M - 14 Standard Test Method for Determining Density of Structural Lightweight Concrete

C641 - 17 Standard Test Method for Iron Staining Materials in Lightweight Concrete Aggregates

C1761 / C1761M - 17 Standard Specification for Lightweight Aggregate for Internal Curing of Concrete
 Masonry Cement
Designation Title
C91 / C91M - 18 Standard Specification for Masonry Cement
C1328 / C1328M - 12 Standard Specification for Plastic (Stucco) Cement
C1329 / C1329M - 16a Standard Specification for Mortar Cement

Materials Applied to New Concrete Surfaces

Designation Title
Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid
C156 - 17
Membrane-Forming Curing Compounds for Concrete
C171 - 16 Standard Specification for Sheet Materials for Curing Concrete
Standard Specification for Liquid Membrane-Forming Compounds for Curing
C309 - 11
Concrete
Standard Specification for Liquid Membrane-Forming Compounds Having Special
C1315 - 11
Properties for Curing and Sealing Concrete

Miscellaneous Tests
Designation Title
C1152 / C1152M - 04(2012)e1 Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete
C1218 / C1218M - 17 Standard Test Method for Water-Soluble Chloride in Mortar and Concrete
C1580 - 15 Standard Test Method for Water-Soluble Sulfate in Soil

Nondestructive and In-Place Testing

Designation Title
Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional
C215 - 14
Resonant Frequencies of Concrete Specimens
C597 - 16 Standard Test Method for Pulse Velocity Through Concrete
C803 / C803M - 18 Standard Test Method for Penetration Resistance of Hardened Concrete
C805 / C805M - 18 Standard Test Method for Rebound Number of Hardened Concrete
C900 - 15 Standard Test Method for Pullout Strength of Hardened Concrete
C1074 - 17 Standard Practice for Estimating Concrete Strength by the Maturity Method
Standard Test Method for Measuring the P-Wave Speed and the Thickness of
C1383 - 15
Concrete Plates Using the Impact-Echo Method
Standard Practice for Evaluating the Condition of Concrete Plates Using the Impulse-
C1740 - 16
Response Method

Organic Materials for Bonding

Designation Title
C881 / C881M - 15 Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With
C882 / C882M - 13a
Concrete By Slant Shear
Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-
C884 / C884M - 16
Resin Overlay
C1059 / C1059M - 13 Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete

Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond
C1583 / C1583M - 13 Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct
Tension (Pull-off Method)

Packaged Dry Combined Materials

Designation Title
Standard Specification for Packaged, Dry, Combined Materials for Concrete and High
C387 / C387M - 17
Strength Mortar
Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials
C928 / C928M - 13
for Concrete Repairs
C1107 / C1107M - 17 Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)

C1708 / C1708M - 16 Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements

Performance of Cementitious Materials and Admixture

Combinations
Designation Title
Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious
C1679 - 17
Mixtures Using Isothermal Calorimetry
Standard Practice for Evaluating Early Hydration of Hydraulic Cementitious Mixtures
C1753 / C1753M - 15e1
Using Thermal Measurements
Standard Guide for Comparing Performance of Concrete-Making Materials Using
C1810 / C1810M - 19
Mortar Mixtures

Pervious Concrete
Designation Title
Standard Test Method for Density and Void Content of Freshly Mixed Pervious
C1688 / C1688M - 14a
Concrete
C1701 / C1701M - 17a Standard Test Method for Infiltration Rate of In Place Pervious Concrete
Standard Test Method for Determining Potential Resistance to Degradation of
C1747 / C1747M - 13
Pervious Concrete by Impact and Abrasion

C1754 / C1754M - 12 Standard Test Method for Density and Void Content of Hardened Pervious Concrete

Petrography
Designation Title
C294 - 12(2017) Standard Descriptive Nomenclature for Constituents of Concrete Aggregates
C295 / C295M - 18a Standard Guide for Petrographic Examination of Aggregates for Concrete
Standard Test Method for Microscopical Determination of Parameters of the Air-
C457 / C457M - 16
Void System in Hardened Concrete
Standard Practice for Examination and Sampling of Hardened Concrete in
C823 / C823M - 12(2017)
Constructions
C856 - 18a Standard Practice for Petrographic Examination of Hardened Concrete
Standard Guide for Examination of Hardened Concrete Using Scanning Electron
C1723 - 16
Microscopy

Physical Tests
Designation Title
Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime
C50 / C50M - 13
and Limestone Products
Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and
C110 - 16e1
Limestone

Polymer-Modified Concrete and Mortars

Designation Title
Standard Specification for Latex and Powder Polymer Modifiers for use in Hydraulic
C1438 - 13(2017)
Cement Concrete and Mortar
Standard Test Methods for Evaluating Latex and Powder Polymer Modifiers for use
C1439 - 13
in Hydraulic Cement Concrete and Mortar

Ready-Mixed Concrete
Designation Title
C94 / C94M - 18 Standard Specification for Ready-Mixed Concrete
Standard Specification for Concrete Made by Volumetric Batching and Continuous
C685 / C685M - 17
Mixing
Standard Specification for Mixing Water Used in the Production of Hydraulic Cement
C1602 / C1602M - 18
Concrete
C1603 - 16 Standard Test Method for Measurement of Solids in Water
Standard Specification for Returned Fresh Concrete for Use in a New Batch of Ready-
C1798 / C1798M - 19
Mixed Concrete

Resistance to the Environment

Designation Title
C666 / C666M - 15 Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing
Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to
C672 / C672M - 12
Deicing Chemicals

Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of
C1646 / C1646M - 16
Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete

Roller-Compacted Concrete
Designation Title
Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete,
C1040 / C1040M - 16a
Including Roller Compacted Concrete, By Nuclear Methods
Standard Test Method for Determining Consistency and Density of Roller-Compacted
C1170 / C1170M - 14e1
Concrete Using a Vibrating Table
 Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a
C1176 / C1176M - 13
Vibrating Table
Standard Test Method for Determining Relative Bond Strength Between Hardened
C1245 / C1245M - 12
Roller Compacted Concrete Lifts (Point Load Test)
Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a
C1435 / C1435M - 14
Vibrating Hammer
Standard Test Method for Determining Density of Roller-Compacted Concrete
C1800 / C1800M - 16
Specimens Using the Gyratory Compactor
Standard Test Method for Density and Air Content (Pressure Method) of Freshly
C1849 / C1849M - 17
Mixed Roller-Compacted Concrete

Self-Consolidating Concrete
Designation Title
Standard Test Method for Static Segregation of Self-Consolidating Concrete Using
C1610 / C1610M - 17
Column Technique
C1611 / C1611M - 18 Standard Test Method for Slump Flow of Self-Consolidating Concrete
C1621 / C1621M - 17 Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring
Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-
C1712 - 17
Consolidating Concrete Using Penetration Test

C1758 / C1758M - 15 Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete

Shotcrete
Designation Title
C1140 / C1140M - 11 Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
C1141 / C1141M - 15 Standard Specification for Admixtures for Shotcrete
C1385 / C1385M - 10(2017) Standard Practice for Sampling Materials for Shotcrete
C1436 - 13 Standard Specification for Materials for Shotcrete
Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use
C1480 / C1480M - 07(2012)
in Wet or Dry Shotcrete Application

C1604 / C1604M - 05(2012) Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete

Special Cements
Designation Title
C806 - 18 Standard Test Method for Restrained Expansion of Expansive Cement Mortar
C845 / C845M - 18 Standard Specification for Expansive Hydraulic Cement
C1600 / C1600M - 18 Standard Specification for Rapid Hardening Hydraulic Cement

Specifications and Guidelines

Designation Title
C5 - 18 Standard Specification for Quicklime for Structural Purposes
C141 / C141M - 14 Standard Specification for Hydrated Hydraulic Lime for Structural Purposes
C206 - 14 Standard Specification for Finishing Hydrated Lime
C207 - 18 Standard Specification for Hydrated Lime for Masonry Purposes
Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil
C593 - 06(2011)
Stabilization
C602 - 13a Standard Specification for Agricultural Liming Materials
C706 - 13 Standard Specification for Limestone for Animal Feed Use
C737 - 13 Standard Specification for Limestone for Dusting of Coal Mines
C821 - 14 Standard Specification for Lime for Use with Pozzolans
Standard Specification for Quicklime, Hydrated Lime, and Limestone for Selected
C911 - 06(2011)
Chemical and Industrial Uses
C977 - 18 Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization
Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous
C1097 - 13
Paving Mixtures
Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single
C1164 - 14
Source
C1489 - 15 Standard Specification for Lime Putty for Structural Purposes
Standard Specification for Quicklime, Hydrated Lime, and Limestone for
C1529 - 06a(2011)
Environmental Uses
C1707 - 18 Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes

D6249 - 06(2011) Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals

Specifications and Test Methods for Accessories and Related

Products
Designation Title
C35 - 01(2014) Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster
Standard Test Methods for Joint Treatment Materials for Gypsum Board
C474 - 15
Construction
Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum
C475 / C475M - 17
Board
C514 - 04(2014) Standard Specification for Nails for the Application of Gypsum Board
C631 - 09(2014) Standard Specification for Bonding Compounds for Interior Gypsum Plastering
C645 - 18 Standard Specification for Nonstructural Steel Framing Members
C847 - 18 Standard Specification for Metal Lath
C897 - 15 Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters
Standard Specification for Surface-Applied Bonding Compounds for Exterior
C932 - 06(2019)
Plastering
C933 - 18 Standard Specification for Welded Wire Lath
Standard Specification for Steel Drill Screws for the Application of Gypsum Panel
C954 - 18 Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in.
(2.84 mm) in Thickness
C955 - 18e1 Standard Specification for Cold-Formed Steel Structural Framing Members
 Standard Specification for Steel Self-Piercing Tapping Screws for Application of
C1002 - 18
Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
C1032 - 18 Standard Specification for Woven Wire Plaster Base
Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer
C1047 - 14a
Base
Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing
C1513 - 18
Connections
Standard Test Methods for Non Metallic Plaster Bases (Lath) Used with Portland
C1764 - 12(2018)
Cement Based Plaster in Vertical Wall Applications
Standard Specification for Non Metallic Plaster Bases (Lath) Used with Portland
C1788 - 14(2019)
Cement Based Plaster in Vertical Wall Applications
Standard Test Methods for Measurement of Tensile Strength or Bond Strength of
C1860 - 19
Portland Cement-Based Plaster by Direct Tension
Standard Specification for Lathing and Furring Accessories, and Fasteners, for
C1861 - 18
Interior and Exterior Portland Cement-Based Plaster

Specifications and Test Methods for Gypsum Products

Designation Title
C22 / C22M - 00(2015) Standard Specification for Gypsum
C28 / C28M - 10(2015) Standard Specification for Gypsum Plasters
C59 / C59M - 00(2015) Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
C61 / C61M - 00(2015) Standard Specification for Gypsum Keene's Cement
C317 / C317M - 00(2015) Standard Specification for Gypsum Concrete
C318 / C318M - 13(2018) Standard Specification for Gypsum Formboard
Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products
C471M - 17ae1
(Metric)
Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and
C472 - 99(2014)
Gypsum Concrete
C473 - 17 Standard Test Methods for Physical Testing of Gypsum Panel Products
C587 - 04(2018) Standard Specification for Gypsum Veneer Plaster
C1177 / C1177M - 17 Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing

C1178 / C1178M - 18 Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel

Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging,

C1264 - 14a
Marking, Shipping, Handling, and Storage of Gypsum Panel Products
C1278 / C1278M - 17 Standard Specification for Fiber-Reinforced Gypsum Panel
C1355 / C1355M - 96(2015) Standard Specification for Glass Fiber Reinforced Gypsum Composites
C1381 / C1381M - 97(2018) Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts
C1396 / C1396M - 17 Standard Specification for Gypsum Board
Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel
C1629 / C1629M - 18a
Products and Fiber-Reinforced Cement Panels
C1658 / C1658M - 18 Standard Specification for Glass Mat Gypsum Panels
C1766 - 15 Standard Specification for Factory-Laminated Gypsum Panel Products
 Standard Test Method for Calibration of Hand-Held Moisture Meters on Gypsum
C1789 - 14(2018)
Panels
Standard Test Methods for High-Temperature Characterization of Gypsum Boards
C1795 - 17
and Panels

Specifications for the Application of Gypsum and Other Products in

Assemblies
Designation Title
Standard Specification for Installation of Steel Framing Members to Receive Screw-
C754 - 18
Attached Gypsum Panel Products
C840 - 18b Standard Specification for Application and Finishing of Gypsum Board
C841 - 03(2018) Standard Specification for Installation of Interior Lathing and Furring
C842 - 05(2015) Standard Specification for Application of Interior Gypsum Plaster
C843 - 17 Standard Specification for Application of Gypsum Veneer Plaster
Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer
C844 - 15
Plaster
C926 - 18b Standard Specification for Application of Portland Cement-Based Plaster
C956 - 04(2015) Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete
Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel
C1007 - 11a(2015)
Studs and Related Accessories
Standard Specification for Installation of Lathing and Furring to Receive Interior and
C1063 - 19a
Exterior Portland Cement-Based Plaster
Standard Specification for Application of Exterior Gypsum Panel Products for Use as
C1280 - 18
Sheathing
Standard Specification for the Installation of Molded Glass Fiber Reinforced Gypsum
C1467 / C1467M - 00(2016)
Parts
Standard Guide for Installation of Gypsum Products in Concealed Radiant Ceiling
C1546 - 02(2014)
Heating Systems
Standard Specification for Installation of Non Metallic Plaster Bases (Lath) Used with
C1787 - 14(2019)
Portland Cement Based Plaster in Vertical Wall Applications
Standard Practice for Design, Construction, and Material Requirements for Direct
C1858 - 17a Hung Suspended T-bar Type Ceiling Systems Intended to Receive Gypsum Panel
Products in Areas Subject to Earthquake Ground Motions
Strength
Designation Title
Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using
C109 / C109M - 16a
2-in. or [50-mm] Cube Specimens)
C348 - 18 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars
Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using
C349 - 18
Portions of Prisms Broken in Flexure)
Standard Test Method for Evaluation of Variability of Cement from a Single Source
C917 / C917M - 18
Based on Strength
Sulfate Content
Designation Title
C563 - 18a Standard Guide for Approximation of Optimum SO3 in Hydraulic Cement
 Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in
C1038 / C1038M - 14b
Water

Sulfate Resistance
Designation Title
Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed
C452 - 15
to Sulfate
Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a
C1012 / C1012M - 18b
Sulfate Solution

Supplementary Cementitious Materials

Designation Title
Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for
C311 / C311M - 18
Use in Portland-Cement Concrete
Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use
C618 - 19
in Concrete
C1240 - 15 Standard Specification for Silica Fume Used in Cementitious Mixtures
C1697 - 18 Standard Specification for Blended Supplementary Cementitious Materials

Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials

C1709 - 18
(ASCM) for Use in Concrete
Terminology
Designation Title
C219 - 14a Standard Terminology Relating to Hydraulic Cement
Terminology
Designation Title
C125 - 19 Standard Terminology Relating to Concrete and Concrete Aggregates

Terminology and Editorial

Designation Title
Standard Terminology Relating to Gypsum and Related Building Materials and
C11 - 18b
Systems

Testing for Strength

Designation Title
C31 / C31M - 19 Standard Practice for Making and Curing Concrete Test Specimens in the Field

C39 / C39M - 18 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of
C42 / C42M - 18a
Concrete
Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with
C78 / C78M - 18
Third-Point Loading)
Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled
C174 / C174M - 17
Concrete Cores
C192 / C192M - 18 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With
C293 / C293M - 16
Center-Point Loading)
Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of
C469 / C469M - 14
Concrete in Compression
C470 / C470M - 15 Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete
C496 / C496M - 17
Specimens
C512 / C512M - 15 Standard Test Method for Creep of Concrete in Compression
C617 / C617M - 15 Standard Practice for Capping Cylindrical Concrete Specimens
Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place
C873 / C873M - 15
in Cylindrical Molds
Standard Test Method for Measuring Early-Age Compressive Strength and Projecting
C918 / C918M - 13
Later-Age Strength
Standard Practice for Use of Unbonded Caps in Determination of Compressive
C1231 / C1231M - 15
Strength of Hardened Cylindrical Concrete Specimens
C1542 / C1542M - 16a Standard Test Method for Measuring Length of Concrete Cores
C1768 / C1768M - 12(2017) Standard Practice for Accelerated Curing of Concrete Cylinders
Standard Practice for Fabricating and Testing Specimens of Ultra-High Performance
C1856 / C1856M - 17
Concrete

Testing Fresh Concrete

Designation Title
Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric)
C138 / C138M - 17a
of Concrete
C143 / C143M - 15a Standard Test Method for Slump of Hydraulic-Cement Concrete
C172 / C172M - 17 Standard Practice for Sampling Freshly Mixed Concrete
Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric
C173 / C173M - 16
Method
Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure
C231 / C231M - 17a
Method
C232 / C232M - 14(2019) Standard Test Method for Bleeding of Concrete

C1064 / C1064M - 17 Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete

Time of Set
Designation Title
C191 - 18a Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore
C266 - 18
Needles
C359 - 18 Standard Test Method for Early Stiffening of Hydraulic Cement (Mortar Method)

C451 - 18 Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method)

Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified
C807 - 18
Vicat Needle
 Volume Change
Designation Title
C151 / C151M - 18 Standard Test Method for Autoclave Expansion of Hydraulic Cement
C596 - 18 Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement

C1608 - 17 Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste
Volume Change
Designation Title
Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and
C157 / C157M - 17
Concrete
Standard Practice for Preparation and Conditioning of Cast, Drilled, or Sawed
C341 / C341M - 18 Specimens of Hydraulic-Cement Mortar and Concrete Used for Length Change
Measurements
Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of
C827 / C827M - 16
Cementitious Mixtures
Standard Test Method for Restrained Expansion of Shrinkage-Compensating
C878 / C878M - 14a
Concrete
Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of
C1090 / C1090M - 15
Hydraulic-Cement Grout
Standard Test Method for Determining Age at Cracking and Induced Tensile Stress
C1581 / C1581M - 18a
Characteristics of Mortar and Concrete under Restrained Shrinkage

C1698 - 09(2014) Standard Test Method for Autogenous Strain of Cement Paste and Mortar
Workability
Designation Title
Standard Test Method for Amount of Water Required for Normal Consistency of
C187 - 16
Hydraulic Cement Paste
C230 / C230M - 14 Standard Specification for Flow Table for Use in Tests of Hydraulic Cement
Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of
C305 - 14
Plastic Consistency
C1437 - 15 Standard Test Method for Flow of Hydraulic Cement Mortar
Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and
C1506 - 17
Plasters
C1738 / C1738M - 19 Standard Practice for High-Shear Mixing of Hydraulic Cement Pastes
Standard Guide for Measurement of the Rheological Properties of Hydraulic
C1749 - 17a
Cementious Paste Using a Rotational Rheometer