Advantages and Dısadvantages of E-MAX and Zırconıa Crowns: Tamar Dolidze, Professor Ilona Bitarova, MA

European Scientific Journal December 2016 /SPECIAL/ edition ISSN: 1857 – 7881 (Print) e - ISSN 1857- 7431
Advantages and Dısadvantages of E-MAX and

Zırconıa Crowns
Tamar Dolidze, Professor

Ilona Bitarova, MA
Grigol Robakidze University, Tbilisi, Georgia
Abstract
The success of a dental restoration depends upon a number of factors
such as the material chosen, its mechanical properties, anatomical form,
surface texture, translucency and color. In order to overcome the unaesthetic
metallic seen in PFM restorations, dental research began to be directed
towards metal-free ceramic restorations to improve the aesthetic outcome.
We will discuss the differences and make some suggestions relative to when
and where Zircon dioxide and IPS E-max crowns are best suited and discuss
about advantages and disadvantages of this two types of crowns.
Keywords: Porcelain fused to metal (PFM); IPS E-max lithium disilcate

crowns; Zircon dioxide.
Introduction:
The success of a dental restoration depends upon a number of factors
such as the material chosen, its mechanical properties, anatomical form,
surface texture, translucency and color. The most common aesthetic
restorative material used in day to day practice for crown and bridge work is
porcelain fused to metal (PFM) because of its excellent mechanical
properties (1). However, the much superior aesthetic outcome of metal-free
ceramic restorations has led to their increasing popularity, especially in the
anterior regions of the mouth. In order to overcome the unaesthetic metallic
hue seen in PFM restorations, dental research began to be directed towards
metal-free ceramic restorations to improve the aesthetic outcome (2).
Research and development led to the creation of many metal-free ceramic
systems. There's been an enormous amount of advertising on both full-
zirconia crowns and IPS E-max lithium disilcate crowns (3).
The characteristics of each material make them ideal for different
situations. Understanding the benefits and risks associated with both
Zirconia and E-max will make it easier to create the perfect crown.Clinician
opinion seems to be that they are both working much better than previous
465
ceramic restorations. Porcelain-fused-to-metal (PFM) appears to be slowly

dying. Most dentists are reluctant to use any new or moderately proven
restoration type for all of their restorations. Porcelain-fused-to-metal is well
proven and has had over 50 years of successful use. Certainly, I am not
saying that this type of crown does not have clinical requirements; it will
always work in certain situations, but there is a question, which of the
twomoderntypes of ceramic crowns should I be doing most? Have they been
used enough to trust them?
E –max crown is a type of all ceramic crown which is preferred for
its long lasting, aesthetic qualities (6).Crown is made from a single block of
lithium disilicate ceramic. This is top grade material which has been
harvested for its toughness, durability and opaque qualities which makes it a
highly prized crown. The crown is considered to be the best match with your
own natural teeth.
E-max crown
Figure: 1 Figure: 2
There is no metal inside the crown so it means no gray line around

the gum line. They are considered to be at less risk of chipping to zirconia
crown. It is rare, but E-max crowns can fracture at the time of try-in or
during adjustment of the occlusion. The most common reason for the
ceramic to fracture is inadequate material thickness.
The manufacturers' stated strength of any ceramic material is totally
dependent on the thickness of the material and the preparation design.
Recommendation is very specific tooth preparation requirements for their
materials in order to guarantee maximum strength and predictable longevity.
Needless to say, anything less than following these recommendations will
result in a weaker final restoration.
Ivoclar's recommended tooth reduction for E-max posterior crowns
is:
466
1. At least 1.5 mm occlusal reduction for cusp tips and the central
groove.
2. 1.5 mm on the axial walls circumferentially in the occlusal one-third.
3. At least 1.0 mm deep flat shoulder margin. Chamfer or feather edge
finish lines are contraindicated.
Although similar in functionality with dioxide, the difference
between E-max and Zirconia crowns is that E-max is more translucent than
Zirconia. The translucency of E-max crowns allows in more light. This
creates a more lifelike crown that requires no stain. However, for a dark
tooth underneath, this characteristic makes Zirconia the better choice (5).
We will discuss the differences and make some suggestions relative
to when and where the two types of restorations are best suited. Both full-
zirconia and lithium disilicate restorations have proven themselves in
situations requiring only single-tooth restorations, does not matter it will be
anterior or posterior side. The idea that we cannot use E-max crown on
molars is false. This type of crown is thin, but when it is cemented on the
tooth and if the preparation of the tooth and thickness of the crown is proper,
connection is very hard and with enamel it is getting like one tissue. We
cannot say same about fixation of zircon dioxide crowns, especially
problems with recementation we occur after cementing zircon dioxide
bridges, single dioxide crowns prove themselves better. Zirconia or lithium
disilicate crowns can be used in three-unit fixed prostheses replacing one
missing tooth. Some laboratories are promoting longer span units of zirconia
restorations. Additionally, a relatively large connector junction of about 4
mm in diameter is suggested to provide acceptable strength when connecting
the abutments to the pontic areas. Multiple-unit lithium disilicate restorations
are not advised at this time in posterior locations (7).
E-max and zirconia restorations can help fix:

• Discolored or stained teeth
• Crooked teeth
• Chipped or cracked teeth
• Decayed teeth
• Older dental work utilizing metal
• Shape or form of teeth
467
Zircon Dioxide Bridge
Figure 3 Figure 4
Conclusion:
Despite manufacturers' efforts to make zirconia significantly more
translucent, the transmittance values of these materials still do not match
conventional lithium disilicate. More research is required on zirconia
towards making the material more translucent for its potential use as esthetic
monolithic restoration. Within the limitations of the study, it can be
concluded that high translucency lithium disilicate is the most translucent
material amongst the materials studied lithium disilicate. Further research is
needed on improving the microstructural features of zirconia materials in
order to enhance their translucency.
References:
Kelly JR., Benetti P. Ceramic materials in dentistry: historical evolution and
current practice. Aust Dent J. 2011; 56:84–96.
Durán P., Villegas M., Fernández JF., Capel F., Moure C. Theoretically
dense and nanostructured ceramics by pressureless sintering of nanosized Y-
TZP powders. Mater SciEng A. 1997; 232:168–176.
Chen YM., Smales RJ., Yip KH., Sung WJ. Translucency and biaxial
flexural strength of four ceramic core materials. Dent Mater. 2008; 24:1506–
1511.
http://www.dentaleconomics.com/articles/print/volume-104/issue-
1/practice/zirconia-vs-lithium-disilicate.html.
http://www.autumndentalarts.com/blog/2016/january/zirconia-vs-emax.aspx
http://www.myperfectdentist.com/e-max.html
http://www.ivoclarvivadent.us/smiletothemax/what-is-emax.php
468

Advantages and Dısadvantages of E-MAX and Zırconıa Crowns: Tamar Dolidze, Professor Ilona Bitarova, MA

Uploaded by

Copyright:

Available Formats

Advantages and Dısadvantages of E-MAX and Zırconıa Crowns: Tamar Dolidze, Professor Ilona Bitarova, MA

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Advantages and Dısadvantages of E-MAX and Zırconıa Crowns: Tamar Dolidze, Professor Ilona Bitarova, MA

Uploaded by

Copyright:

Available Formats

European Scientific Journal December 2016 /SPECIAL/ edition ISSN: 1857 – 7881 (Print) e - ISSN 1857- 7431

Advantages and Dısadvantages of E-MAX and

Tamar Dolidze, Professor

Keywords: Porcelain fused to metal (PFM); IPS E-max lithium disilcate

ceramic restorations. Porcelain-fused-to-metal (PFM) appears to be slowly

There is no metal inside the crown so it means no gray line around

E-max and zirconia restorations can help fix:

Zircon Dioxide Bridge

You might also like