0% found this document useful (0 votes)
276 views9 pages

Determination of In-Situ Dry Density: Tested by Approved by Witnessed by

This document summarizes the results of in-situ dry density tests conducted according to BS 1377 Test No. 15 on multiple dates. It includes details of each test such as location, hole depth, weights measured, moisture content, dry density, and compares the measured dry density to specification requirements. The test method involves using a sand cone to determine the volume of a hole dug, then calculates density from the weights of soil extracted and moisture content.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
276 views9 pages

Determination of In-Situ Dry Density: Tested by Approved by Witnessed by

This document summarizes the results of in-situ dry density tests conducted according to BS 1377 Test No. 15 on multiple dates. It includes details of each test such as location, hole depth, weights measured, moisture content, dry density, and compares the measured dry density to specification requirements. The test method involves using a sand cone to determine the volume of a hole dug, then calculates density from the weights of soil extracted and moisture content.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 9

Calibration Date : 01.01.

01
DETERMINATION OF IN-SITU DRY DENSITY
BS 1377 TEST NO. 15
Date of Test 01.01.01 01.01.01 01.01.01 01.01.01
Laboratory Test No. OPW/02/EW/SB/ SB 9 10 11 12

Coverd Chainage 0+573 0+530 0+063 0+063


0+605 0+573 0+140 0+140
Test Location 0+588 0+560 0+089 0+116
Side LHS LHS RHS LHS
Offset m 3.0 2.0 1.0 1.0
F.L mm 110 110 110 110
Hole Depth mm 130 150 150 150
Container Weight g 541 541 541 541
Weight of Soil from hole + container g 5445 4712 5527 5431
Weight of Soil from hole g 4904 4171 4986 4890
Sand cone No. 1 1 1 1
Weight of standard sand before pouring g 17000 17000 17000 17000
Weight of standard sand after pouring g 12701 13190 12684 12764
Weight of standard sand in hole + cone(+base plate) g 4299 3810 4316 4236
Weight of standard sand in cone + base plate g 1081 1081 1081 1081
Weight of standard sand in hole g 3218 2729 3235 3155
Bulk density of standard sand g/cm3 1.373 1.373 1.373 1.373
Volume of hole cm3 2344 1988 2356 2298
Wet Density of Soil/ABC g/cm3 2.092 2.098 2.116 2.128
Moisture content
Container No. 1 1 1 1
Weight of wet Soil/ABC + container g 575.0 571.0 569.0 541.0
Weight of dry Soil/ABC + container g 555.0 550.0 546.0 520.0
Weight of container g 344.0 344.0 344.0 344.0
Moisture content % 9.5 10.2 11.4 11.9
Dry density g/cm3 1.911 1.904 1.900 1.901
Reference Lab Value
Maximum Dry Density g/cm3 1.940 1.940 1.930 1.930
Optimum Moistur Content % 11.4 11.4 13.1 13.1
Laboratory Test No. SG 1 SG 1 S6 S6
Specification Requirements (Degree of compection) % 98.0 98.0 98.0 98.0
Degree of Compaction 97.5 % 98.5 98.2 98.4 98.5
Approved/Not Approved APP: APP: APP: APP:
Remarks Top Top Top Top

Tested By Approved By Witnessed By

LT/MT QAM TO/ENGINEER


Calibration Date : 01.01.01
DETERMINATION OF IN-SITU DRY DENSITY
BS 1377 TEST NO. 15
Date of Test
Laboratory Test No. OPW/02/EW/SB/ SB

Coverd Chainage

Test Location
Side
Offset m
Depth mm
Hole Depth mm
Container Weight g
Weight of Soil from hole + container g
Weight of Soil from hole g
Sand cone No.
Weight of standard sand before pouring g
Weight of standard sand after pouring g
Weight of standard sand in hole + cone(+base plate) g
Weight of standard sand in cone + base plate g
Weight of standard sand in hole g
Bulk density of standard sand g/cm3
Volume of hole cm3
Wet Density of Soil/ABC g/cm3
Moisture content
Container No.
Weight of wet Soil/ABC + container g
Weight of dry Soil/ABC + container g
Weight of container g
Moisture content %
Dry density g/cm3
Reference Lab Value
Maximum Dry Density g/cm3
Optimum Moistur Content %
Laboratory Test No.
Specification Requirements (Degree of compection) %
Degree of Compaction %
Approved/Not Approved
Remarks

Tested By Approved By Witnessed By

LT/MT QAM TO/ENGINEER


Calibration Date : 01.01.01
DETERMINATION OF IN-SITU DRY DENSITY
BS 1377 TEST NO. 15
Date of Test 20.02.2017 20.02.2017 20.02.2017 23.02.2017
Laboratory Test No. OPW/02/EW/SB/ SB 11 12 13 14

Coverd Chainage 1+495 1+592 1+360 1+350


1+525 1+608 1+420 1+360
Test Location 1+515 1+604 1+386 1+356
Side LHS LHS RHS RHS
Offset m 3.8 3.7 3.7 3.2
Depth mm 300 300 170 250
Hole Depth mm 150 150 150 160
Container Weight g 409 409 322 409
Weight of Soil from hole + container g 4011 4154 4256 4184
Weight of Soil from hole g 3602 3745 3934 3775
Sand cone No. 1 1 1 1
Weight of standard sand before pouring g 15000 15000 15000 15000
Weight of standard sand after pouring g 11754 11658 11575 11685
Weight of standard sand in hole + cone(+base plate) g 3246 3342 3425 3315
Weight of standard sand in cone + base plate g 1064 1064 1064 1064
Weight of standard sand in hole g 2182 2278 2361 2251
Bulk density of standard sand g/cm3 1.255 1.255 1.255 1.255
Volume of hole cm3 1739 1815 1881 1794
Wet Density of Soil/ABC g/cm3 2.072 2.063 2.091 2.105
Moisture content
Container No. 1 1 1 1
Weight of wet Soil/ABC + container g 446.0 457.0 490.0 358.0
Weight of dry Soil/ABC + container g 411.0 420.0 467.0 342.0
Weight of container g 101.0 101.0 101.0 101.0
Moisture content % 11.3 11.6 6.3 6.6
Dry density g/cm3 1.862 1.849 1.967 1.974
Reference Lab Value
Maximum Dry Density g/cm3 1.905 1.905 2.030 2.030
Optimum Moistur Content % 13.0 13.0 8.0 8.0
Laboratory Test No. KD/2/S/40 KD/2/S/40 KD/2/S/38 KD/2/S/38
Specification Requirements (Degree of compection) % 95.0 95.0 95.0 95.0
Degree of Compaction % 97.7 97.0 96.9 97.2
Approved/Not Approved APP: APP: APP: APP:
Remarks 1st Layer (Top) 1st Layer (Top) 1st Layer (Top) 1st Layer (Top)

Trial Pit Trial Pit Trial Pit Trial Pit


Tested By Approved By Witnessed By

LT/MT QAM TO/ENGINEER


Calibration Date : 01.01.01
DETERMINATION OF IN-SITU DRY DENSITY
BS 1377 TEST NO. 15
Date of Test
Laboratory Test No. OPW/02/EW/SB/ SB

Coverd Chainage

Test Location
Side
Offset m
Depth mm
Hole Depth mm
Container Weight g
Weight of Soil from hole + container g
Weight of Soil from hole g
Sand cone No.
Weight of standard sand before pouring g
Weight of standard sand after pouring g
Weight of standard sand in hole + cone(+base plate) g
Weight of standard sand in cone + base plate g
Weight of standard sand in hole g
Bulk density of standard sand g/cm3
Volume of hole cm3
Wet Density of Soil/ABC g/cm3
Moisture content
Container No.
Weight of wet Soil/ABC + container g
Weight of dry Soil/ABC + container g
Weight of container g
Moisture content %
Dry density g/cm3
Reference Lab Value
Maximum Dry Density g/cm3
Optimum Moistur Content %
Laboratory Test No.
Specification Requirements (Degree of compection) %
Degree of Compaction %
Approved/Not Approved
Remarks
Trial Pit Trial Pit Trial Pit Trial Pit

Tested By Approved By Witnessed By

LT/MT QAM TO/ENGINEER


Calibration Date : 01.01.01
DETERMINATION OF IN-SITU DRY DENSITY
BS 1377 TEST NO. 15
Date of Test 16.11.2016 16.11.2016 16.11.2016 16.11.2016
Laboratory Test No. OPW/02/EW/SB/ SB 17 18 19 20

Coverd Chainage - - - -
- - - -
Test Location 3+560 3+600 3+720 3+800
Side LHS RHS LHS LHS
Offset m 4.0 3.5 4.2 3.1
Depth mm 55 30 60 50
Hole Depth mm 220 230 235 230
Container Weight g 322 322 322 322
Weight of Soil from hole + container g 14658 15223 14823 15233
Weight of Soil from hole g 14336 14901 14501 14911
Sand cone No. 1 1 1 1
Weight of standard sand before pouring g 29000 29000 29000 29000
Weight of standard sand after pouring g 19201 18856 19036 18995
Weight of standard sand in hole + cone(+base plate) g 9799 10144 9964 10005
Weight of standard sand in cone + base plate g 2559 2559 2559 2559
Weight of standard sand in hole g 7240 7585 7405 7446
Bulk density of standard sand g/cm3 1.250 1.250 1.250 1.250
Volume of hole cm3 5792 6068 5924 5957
Wet Density of Soil/ABC g/cm3 2.475 2.456 2.448 2.503
Moisture content
Container No. 1 1 1 1
Weight of wet Soil/ABC + container g 614.0 629.0 685.0 529.0
Weight of dry Soil/ABC + container g 595.0 611.0 664.0 511.0
Weight of container g 101.0 101.0 101.0 101.0
Moisture content % 3.8 3.5 3.7 4.4
Dry density g/cm3 2.383 2.372 2.360 2.398
Reference Lab Value
Maximum Dry Density g/cm3 2.409 2.409 2.409 2.409
Optimum Moistur Content % 6.2 6.2 6.2 6.2
Laboratory Test No. ABC/SP/1/01 ABC/SP/1/01 ABC/SP/1/01 ABC/SP/1/01

Specification Requirements (Degree of compection) % 98.0 98.0 98.0 98.0


Degree of Compaction % 98.9 98.5 98.0 99.5
Approved/Not Approved APP: APP: APP: APP:
Remarks 1st Layer 1st Layer 1st Layer 1st Layer
Trial Pit Trial Pit Trial Pit Trial Pit

Tested By Approved By Witnessed By

LT/MT QAM TO/ENGINEER


Calibration Date : 01.01.01
DETERMINATION OF IN-SITU DRY DENSITY
BS 1377 TEST NO. 15
Date of Test 16.11.2016 16.11.2016 20.11.2016 20.11.2016
Laboratory Test No. OPW/02/EW/SB/ SB 21 22 23 24

Coverd Chainage - - - -
- - - -
Test Location 3+900 3+920 6+300 6+370
Side LHS RHS LHS RHS
Offset m 5.0 3.2 3.0 3.0
Depth mm 60 70 70 60
Hole Depth mm 230 235 225 230
Container Weight g 322 322 322 322
Weight of Soil from hole + container g 14552 15367 14355 14789
Weight of Soil from hole g 14230 15045 14033 14467
Sand cone No. 1 1 1 1
Weight of standard sand before pouring g 29000 29000 29000 29000
Weight of standard sand after pouring g 19236 18841 19232 19102
Weight of standard sand in hole + cone(+base plate) g 9764 10159 9768 9898
Weight of standard sand in cone + base plate g 2559 2559 2559 2559
Weight of standard sand in hole g 7205 7600 7209 7339
Bulk density of standard sand g/cm3 1.250 1.250 1.250 1.250
Volume of hole cm3 5764 6080 5767 5871
Wet Density of Soil/ABC g/cm3 2.469 2.475 2.433 2.464
Moisture content
Container No. 1 1 1 1
Weight of wet Soil/ABC + container g 711.0 635.0 400.0 436.0
Weight of dry Soil/ABC + container g 688.0 619.0 387.0 427.0
Weight of container g 101.0 101.0 101.0 101.0
Moisture content % 3.9 3.1 4.5 2.8
Dry density g/cm3 2.376 2.400 2.327 2.398
Reference Lab Value
Maximum Dry Density g/cm3 2.409 2.409 2.403 2.403
Optimum Moistur Content % 6.2 6.2 6.0 6.0
Laboratory Test No. ABC/SP/1/01 ABC/SP/1/01 ABC/SP/1/02 ABC/SP/1/02

Specification Requirements (Degree of compection) % 98.0 98.0 98.0 98.0


Degree of Compaction % 98.6 99.6 96.9 99.8
Approved/Not Approved APP: APP: N.APP: APP:
Remarks 1st Layer 1st Layer 1st Layer 1st Layer
Trial Pit Trial Pit Trial Pit Trial Pit

Tested By Approved By Witnessed By

LT/MT QAM TO/ENGINEER


SUB BASE JANUARY 1999
Field
Test No Test Offset( OMC( MDD Field DD App./N
Date of Test OPW/02/EW/SB/
Covering Area Side Reference MC DOC(%) Layer Remarks
Location m) %) (g/cm3) (g/cm3) ot
(%)
01.01.01 9 0+588 0+573 0+605 LHS 3.0 SG 1 11.4 1.940 9.5 1.911 98.5 APP: Top 0
01.01.01 10 0+560 0+530 0+573 LHS 2.0 SG 1 11.4 1.940 10.2 1.904 98.2 APP: Top 0
01.01.01 11 0+089 0+063 0+140 RHS 1.0 S6 13.1 1.930 11.4 1.900 98.4 APP: Top 1 TYPE
01.01.01 12 0+116 0+063 0+140 LHS 1.0 S6 13.1 1.930 11.9 1.901 98.5 APP: Top 1 TYPE
0 0 0 0.0 0.0 0 0.0 0 0.0 0.000 0.0 0.000 #DIV/0! 0 0 1 TYPE
12/30/1899 0 0 0.0 0.0 0 0.0 0 0.0 0.000 0.0 0.000 #DIV/0! 0 0 1 TYPE
12/30/1899 0 0 0.0 0.0 0 0.0 0 0.0 0.000 0.0 0.000 #DIV/0! 0 0 1 TYPE
12/30/1899 0 0 0.0 0.0 0 0.0 0 0.0 0.000 0.0 0.000 #DIV/0! 0 0 1 TYPE
20.02.2017 11 1+515 1+495 1+525 LHS 3.8 KD/2/S/40 13.0 1.905 11.3 1.862 97.7 APP: 1st Layer (Top) 1 TYPE
20.02.2017 12 1+604 1+592 1+608 LHS 3.7 KD/2/S/40 13.0 1.905 11.6 1.849 97.0 APP: 1st Layer (Top) 1 TYPE
23.02.2017 13 1+386 1+360 1+420 RHS 3.7 KD/2/S/38 8.0 2.030 6.3 1.967 96.9 APP: 1st Layer (Top) 1 TYPE
23.02.2017 14 1+356 1+350 1+360 RHS 3.2 KD/2/S/38 8.0 2.030 6.6 1.974 97.2 APP: 1st Layer (Top) 1 TYPE
12/30/1899 0 0.00 0.0 0.0 0 3.8 0.00 0.0 0.000 0.0 0.000 #DIV/0! 0.00 0.00 1 TYPE
12/30/1899 0 0.00 0.0 0.0 0 0.0 0.00 0.0 0.000 0.0 0.000 #DIV/0! 0.00 0.00 1 TYPE
12/30/1899 0 0.00 0.0 0.0 0 0.0 0.00 0.0 0.000 0.0 0.000 #DIV/0! 0.00 0.00 1 TYPE
12/30/1899 0 0.00 0.0 0.0 0 0.0 0.00 0.0 0.000 0.0 0.000 #DIV/0! 0.00 0.00 1 TYPE
ABC/SP/1/
16.11.2016 17 3+560 - - LHS 4.0 01
6.2 2.409 3.8 2.383 98.9 APP: 1st Layer 1 TYPE
ABC/SP/1/
16.11.2016 18 3+600 - - RHS 3.5 01
6.2 2.409 3.5 2.372 98.5 APP: 1st Layer 1 TYPE
ABC/SP/1/
16.11.2016 19 3+720 - - LHS 4.2 01
6.2 2.409 3.7 2.360 98.0 APP: 1st Layer 1 TYPE
ABC/SP/1/
16.11.2016 20 3+800 - - LHS 3.1 01
6.2 2.409 4.4 2.398 99.5 APP: 1st Layer 1 TYPE
16.11.2016 21 3+900 - - LHS 5.0 ABC/SP/1/01 6.2 2.409 3.9 2.376 98.6 APP: 1st Layer 1 TYPE
16.11.2016 22 3+920 - - RHS 3.2 ABC/SP/1/01 6.2 2.409 3.1 2.400 99.6 APP: 1st Layer 1 TYPE
20.11.2016 23 6+300 - - LHS 3.0 ABC/SP/1/02 6.0 2.403 4.5 2.327 96.9 N.APP: 1st Layer 1 TYPE
20.11.2016 24 6+370 - - RHS 3.0 ABC/SP/1/02 6.0 2.403 2.8 2.398 99.8 APP: 1st Layer 1 TYPE
CONTRACTOR CONSULTANT
Prepared by Approved by Checked by

MT/LT QAM STO/ENGINEER

You might also like