QPDT1 9 Mar A 0055
QPDT1 9 Mar A 0055
QPDT1 9 Mar A 0055
: GC18107300
DOCUMENT TITLE:
(QPDT1-9-MAR-E-0005)
TABLE OF CONTENTS
CR COPY…………………………………………………………………ANNEXURE 5
WARRANTY CERTIFICATE…………………………………………..ANNEXURE 9
PART 1 – GENERAL
1.1 SUMMARY
A. General: Read this Section in conjunction with other related Sections, Division 01 General
Requirements, the Design Drawings and the Contract Conditions.
B. Section Includes
2. Connectors.
3. Related accessories.
1. section 260519.
D. Definitions
1.2 SUBMITTALS
A. General: Comply with the requirements of Section 013300 Submittal Procedures and submit
the following.
1. Shop Drawings.
3. Supplementary Product Literature: Include a statement from the manufacturer for the
design life of the system.
11. Manufacturer's Certificate: Certify that products meet or exceed specified requirements.
12. The Contractor shall submit the following related with each electrical system for the
Client approval.
c. Test certificates.
1. Warranties.
2. Operation and Maintenance (O+M) Manuals: Include component list with manufacturer's
reference numbers, descriptions of materials and procedures for repairing.
B. Installers Qualifications: Use competent persons to install the equipment and provide them
with documentary evidence of their competence, which the Client or Employer, or their
nominees, shall be entitled to see at any time.
C. All cable type shall have been subjected to Type Tests in accordance with the relevant IEC
or British Standards. Type test certificates shall be furnished
D. Standards and other Codes of Practice: In addition to the requirements indicated on the
Design Drawings and specified in the Specification, the Work shall be in accordance with
provisions of the following standards, codes and statutory documents.
c. BS 6004 Electric cables. PVC insulated and PVC sheathed cables for voltages up to
and including 300/ 500 V, for electric power and lighting.
e. BS EN 60702-1: Mineral insulated cables and their terminations with a rated voltage
not exceeding 750 V Cables.
f. BS 6346 Electric cables. PVC insulated, armoured cables for voltages of 600/ 1 000V
and 1
900/ 3 300.
k. BS IEC 60287 (All parts) Electric cables. Calculation of the current rating.
n. BS EN 50525 Electric cables. Low voltage energy cables of rated voltages up to and
including 50/ 750 V (U0/ U).
q. BS EN 60702-1 Mineral insulated cables and their terminations with a rated voltage
not exceeding 750 V. Cables.
f. IEC 60502/ BS 7835 Extruded solid dielectric insulated power cables for rated
voltages from 1 kV up to 30 kV.
11. Where conflicts exist between the requirements of this Specification and other drawings,
standards, codes and specifications, the most stringent shall be applied
12. The Quality Control/ Assurance duties shall be performed by the Contractor. The system
of quality control verification shall be in accordance with ISO 9000 standards of Quality
Control/ Assurance.
1. Submit reports of independent tests demonstrating that the products and systems
comply with the specified performance requirements.
2. Where test results for a material or product are not available, undertake testing to show
compliance with the Specification at an independent testing laboratory acceptable to the
Client.
3. The provision of testing data or the carrying-out of tests shall not relieve the Contractor of
his responsibilities regarding the performance requirements, durability or service life
requirements.
A. Deliver, store, protect and handle products to Site with particular reference to Qatar climatic
conditions.
A. The cable shall be suitable for continuous operation in desert locations under high ambient
temperatures and humidity. The atmosphere is to be considered saliferous, sulphurous,
dusty, and with high concentrations of windburn sand as commonly encountered in Qatar.
The possibility of condensation, as experienced during large temperature fluctuations in
humid atmosphere, shall be taken into account
a. Fastened to cable ladder rack or tray in the open air exposed to direct sunlight or
within buildings.
PART 2 – PRODUCTS
2.1 GENERAL
A. Ensure that each cable is of sufficient rating for its normal and fault conditions. To assess
the rating and cross section required for each cable the following factors shall be
considered.
1. Fault level.
3. Voltage drop.
7. BS 7671 requirements.
B. Submit details of the cable sizes for the Engineer's acceptance before ordering.
D. Each cable shall be supplied in a suitable length and be continuous through its run.
Through joints shall not be permitted without written permission from the Client.
E. The earthing conductor shall be of adequate cross sectional area and shall either be one
core of a multicore cable or a separately run single core cable.
F. Supply and install all necessary cable glands and sealing boxes required to complete the
installation. All materials used in the manufacture of the glands and similar items shall have
no deleterious effect on the cable core or armoring and shall not be susceptible to
corrosion.
G. The cores of each cable shall be taken direct to the terminals of the equipment to be
connected. Cable ends shall be sealed in suitable chambers bolted to terminal boxes.
Compression glands with armor clamps, where required, shall be supplied as an integral
part of switchboards, distribution boards, switches, motor starters and similar equipment,
unless otherwise stated.
H. The general routing of cables may be indicated on the Design Drawings but the final routes
and duct locations shall be agreed with the Client before any work in connection with the
cable installation is commenced. All cables shall be installed in strict accordance with the
requirements of this Section.
I. All cables used shall bear the manufacturer's original guarantee and all cables shall be
delivered to Site in their original wrappings. Obtain the permission of the Client before any
wrappings removed or cables are installed.
Package 1 Combined Specification - Electrical
82 of 278 GC17105300
QPD-9-A14-1001
Doc. No: QPD-9-E14-0001
Package A Electrical Specification
Revision: F
Date: 20/12/2018
Revision of Detailed Design of Fit-Out Works
Page 83 of 278
at Qatar Petroleum District
J. A minimum length of 250mm tails shall be left on all cables at outlet positions for connection
of the lighting fittings or other apparatus fed by the outlet.
K. The installation of multi-core and single core cables or bunching of cables in conduit shall
be carried out on the assumption that such cables shall carry alternating current.
L. The excessive bunching of small cables in large conduits shall not be permitted. Do not
exceed the requirements of the stated Regulations within this Section.
N. Include for terminating each cable in a pressure operated mechanically crimped leg terminal
or terminal socket.
A. Manufacturers: Provide systems and products from one of the listed manufacturers within
the approved manufacturer list.
A. General
2. Cables ends shall be sealed and fixed to the drum. Cable drums shall be fitted with
battens, fixed around the entire periphery of the drum.
3. All cable drums shall have their identification reference clearly stenciled on the outside
of both flanges.
4. Drum identification labels shall be attached on the outside and inside of the drum
flange. Labels shall be robust and non fading and give the following information:
b. Voltage grade
e. Cable quality
g. Manufacturer's name
a. Number of Cores
b. Size of Conductor
c. Voltage rating
d. Manufacturer's name
1. Insulation thickness
4. Overall diameter
5. Current rating in air and ground for the ambient conditions specified
C. Application
Package 1 Combined Specification - Electrical
84 of 278 GC17105300
QPD-9-A14-1001
Doc. No: QPD-9-E14-0001
Package A Electrical Specification
Revision: F
Date: 20/12/2018
Revision of Detailed Design of Fit-Out Works
Page 85 of 278
at Qatar Petroleum District
1. Wire and cable installed in conduits shall be of the single core LSF insulated copper
type single core to BS 7211.
2. All lighting distribution wiring shall be single core LSF insulated copper insulated wiring
cables non- armored to BS 7211 installed in conduit unless otherwise stated.
3. All control cables shall be PVC insulated sheathed, 2.5 mm² copper conductor cables of
600/1000V grade as per BS 5467.
4. Fire resistant polymer cables shall be used for power feeders serving life safety
equipment.
5. All earth cables shall be in accordance with the requirements specified in Section
260526 Grounding and Bonding for Electrical Systems.
6. Cables shall be sized in accordance with the requirements specified in Section 260100
Operation and maintenance of electrical Systems.
7. All conductors shall have the color impregnated into the insulation at the time of
manufacture.
9. Type and size of Cables shall be as indicated in the electrical diagrams, electrical load
schedules and other related Design Drawings.
10. Unless otherwise indicated, the following final sub-circuit connection and wiring details
shall apply throughout the works:
a. Lighting Circuits up to 1200 Watts: 10 amp breaker protection wired with 3 x 2.5mm²
single core LSF insulated copper wires.
b. Lighting Circuits 1000 to 1800 watts: 15 amp breaker protection Wired with 3 x
2.5mm² single core LSF insulated copper wires.
c. High integrity earthed 13 amp socket outlets: 32 amp breaker protection on ring
main basis wired with 4 x 4mm² and 2 x 4.0mm² single core LSF insulated copper
wires.
d. Clean earth 13amp socket outlets: 32 amp breaker protection on ring main basis
wired with
e. 4x4mm² and 2 x 4.0mm² single core LSF insulated copper wire
h. Domestic cooker control unit: 32 amp breaker protection Wired with 3 x 10mm²
single core
i. LSF insulated copper wires.
j. Fan coil units each: 20 amp breaker protection wired with 2 x 4mm² and 1 x 4mm²
single core
k. LSF insulated copper wires.
l. Electric hand dryers: 20 amp breaker with 30 mA earth leakage sensitivity protection
Wired with 2 x 4mm² + 1 x 4.0mm² (2Kw rating) single core LSF insulated copper
wires.
m. The above details for connections shall apply throughout the Works, except where
the IEE Regulations would be contravened. In such cases the Contractor shall utilize
a larger conductor size as appropriate.
11. Cable specification and manufacture must be consistent throughout each wired system.
All cable utilized must be continuously run from source to termination, without any
through jointing included.
12. Cable must be adequately stored and protected from damage pending installation and
also during installation until permanent protection is effected.
13. Cable reels must be supported on purpose formed support frames and under no
circumstance shall cable be drawn from reels laid on the ground. This shall be strictly
enforced, as the Engineer's condemnation of any cable that is considered to have been
abused shall involve total replacement at cost to the Contractor.
14. The cross sectional area of every cable shall be suitable for carrying the maximum
sustained load current under normal conditions and shall be selected in accordance
with IEE Regulations.
15. The cross sectional area of the neutral conductor for 3-phase circuits shall be equal to
the cross sectional area of the phase conductors.
16. The cables shall be selected such that the drop in voltage from the origin of the
installation to any point in the installation does not exceed 4% of the nominal voltage
when the conductors are carrying the full load current, but disregarding starting
conditions. Voltage drop calculation shall be submitted for approval and the cross
Package 1 Combined Specification - Electrical
86 of 278 GC17105300
QPD-9-A14-1001
Doc. No: QPD-9-E14-0001
Package A Electrical Specification
Revision: F
Date: 20/12/2018
Revision of Detailed Design of Fit-Out Works
Page 87 of 278
at Qatar Petroleum District
sectional area of the cable shall be increased accordingly if required to meet the above
mentioned requirement without any extra cost.
17. The cables connected in parallel shall be of the same type, cross sectional area, length
and disposition and be arranged so as to carry substantially equal load currents.
2.4 MATERIALS
A. General
1. LSF insulated, non armored single core stranded copper conductors not less than
2.5mm² and not less than 750 volt grade for all types of branch circuit wiring in conduit
to BS 7655. Size of cables shall be as detailed on Design Drawings.
2. Heat resisting three core circular flexible cable, copper strands and rated not less than
15 amp, to
3. BS 5467. Compression glands shall be used for making final termination to conduit
systems.
5. Copper conductors and copper sheath with LSF outer covering over sheath. Not less
than 750 volt grade.
6. Factory made glands, pots, seals and neoprene sleeving for making termination of the
cable.
1. Conductors for all cables and flexible cords provided on this Contract shall be to
standard metric cross-sectional areas and stranding as indicated in columns 'A' and 'B'
of Tables Nos. 1 and 2 in below table.
TABLE NO. 1
'HARD WIRING' CONDUCTORS
COLUMN 'A' CROSS COLUMN 'B'
SECTION AREA (mm2) NO. AND DIAMETER OF WIRES
(mm)
2.5 7/0.67
4.0 7/0.85
6.0 7/1.04
10.0 1/1.35
16.0 7/1.70
25.0 7/2.14
35.0 19/1.53
50.0 19/1.78
70.0 19/2.14
95.0 37/1.78
120.0 37/2.03
150.0 37/2.25
185.0 37/2.52
240.0 61/2.25
300.0 61/2.52
400.0 91/2.36
500.0 91/2.65
TABLE NO. 2
FLEXIBLE CORDS AND CABLES
COLUMN 'A' CROSS COLUMN 'B'
SECTION AREA (mm2) NO. AND DIAMETER OF WIRES
(mm)
2.50 50/0.20
4.00 56/0.30
6.00 84/0.30
10.00 80/0.40
16.00 126/0.40
25.00 196/0.40
35.00 276/0.40
50.00 396/0.50
70.00 360/0.50
95.00 475/0.50
2. The terms 'hard wiring' conductors shall mean those conductors installed within
raceways and multi-core armored or metal sheathed cables, excluding mineral insulated
copper sheathed cables which by nature of their manufacture, shall be solid hard drawn
conductors with the cross sectional area as indicated on the Design Drawings and Load
Schedules.
3. Hard wiring conductor sizes smaller than 2.5 mm² for lighting circuits and 4mm² for
small power circuits shall not be used. The sizes of current carrying conductors for all
sub-circuit and distribution wiring shall be as indicated on the Design Drawings, Load
Schedules and in these specifications, and shall comply with the regulations of
authorities having jurisdiction. Refer to the tables indicated above for hard wiring
conductors and flexible cords and cables.
C. Cable Cores
1. The metal core of the conductor shall be annealed high conductivity copper. Rubber
insulated cables shall have high conductivity tinned copper conductors.
D. Cable Insulation
1. The core of each conductor shall be surrounded by insulation. The insulation shall have
a constant thickness which shall not be less than those given in the relevant BS
Specifications. The insulation characteristics and testing shall correspond with the
requirements of these standards. The characteristics of cross-linked polyethylene shall
conform to the requirements of BS 6724
2. Standard. The mix composition must satisfy the stringent requirements regarding water
absorption and the addition of the appropriate stabilizing agent to prevent aging.
3. The insulation shall be applied by extrusion, hard against the core, without however,
adhering to it, in a single layer.
5. The synthetic rubber used in the manufacture of flexible cable must have excellent
resistance to thermal aging, good flexibility and low water absorption properties.
6. Flexible cables which are synthetic rubber insulated shall not be used wherever cables
are subjected to mechanical stress.
7. High temperature PVC or silicone rubber insulated cables shall be used where high
ambient temperatures are expected. They shall be designed to function continuously in
an ambient temperature range between 80°C and 150°C.
1. Unless specified otherwise, multi-core cables shall have one or more outer coverings
and armouring. The outer covering must ensure the following characteristics:
a. Resistance to vermin.
b. Resistance to oil.
f. LSF
2. The outer covers shall be LSF type and single wire armour.
3. Single conductor armoured cables shall have non-magnetic armouring of aluminum wire
or strip.The armouring of all single core cables in the same circuit shall be solidly
bonded together at both ends of their run.
1. All cable shall have copper conductors with 750 volt, 85°C rated XL-PVC insulation,
conforming to BS 7655, except where higher temperatures are expected, in which case
silicone rubber cables shall be used.
2. Unless otherwise specified, raceway systems shall be wired using LSF insulated cables.
All conductors shall be stranded, not solid type.
1. All cable shall conform to BS 5467 with the following additional requirements:
b. Insulation shall be minimum 85°C rated XLPE as indicated for specific cables on the
Design Drawings.
c. Metallic armour covering shall be galvanized steel wire with overall LSF jacket.
2. Armoured Cable.
a. Low voltage XLPE insulated, LSZH inner sheath, SWA, LSZH outer-sheathed power
cables.
4) Core Identification: Up to four cores colored (Red, Yellow, Blue, Black). All
control cables shall be colored white with black numbers along the length of
cores at 150mm intervals. Core numbering shall be of the non-fading type. 3
core cables used for lighting shall have (Red, Black, Green, Yellow colors for the
cores).
5) Conductor lay: Cores laid up with extruded LSZH filler for up to 5 cores. For 6
cores or more wrapping of LSZH tape.
7) Outer Sheath: The outer sheath of cable shall be an extruded layer of Low
Smoke Zero Halogen colored black, intrinsically flame retardant and anti termite
protected, and emitting very low levels of smoke and nontoxic levels of
poisonous halogen gases (typically less than 0.5% HCI emission)
b. Power cables installed within the building LSZH shall be BS6724 XLPE/ SWA/
MULTI OR SINGLE CORE PVC INSULATED COPPER with low smoke zero
halogen outer and inner sheaths.
b. Insulation: Low smoke and fume thermosetting (color red, yellow, blue, black etc, as
required)
4. Earthing Cable
A. The color identification for single core insulated cables shall be as follows:
1. Phase conductor: Red, Yellow or Blue.
1. Two core
3. Four core
1. Control wiring: White with black numbers along the length of cores at 150mm interval
with cable marker to match the diagrams at each point of connection and termination.
C. All cables which do not form part of the mains voltage power and lighting distribution system
shall be wired in white cables which shall be fitted with numbers tight-fitting rubber or plastic
marker sleeves, at each end, as listed below. Combinations of markers each bearing a
single digit may be used to make up each number.
2. The sleeves for fire alarm sounding system cables shall be numbered:
c. 620 up to 749 for individual alarm sounding circuits switch lines in sequence.
A. No part of the new installations shall be connected temporarily to the Supply Infrastructure's
mains without the approval of the Client.
B. All temporary lighting and electric wiring which the Contractor may require must be provided
by the Contractor who shall be responsible for all charges for electricity consumed as stated
in the Contract conditions.
C. Temporary wiring and connections executed by the Contractor to the instructions of the
Client shall be arranged in accordance with the IEE Regulations. Where the ambient air
temperature is in excess of
D. 50°C. heat resisting silicon rubber cables shall be used for temporary connection. Where
such cables may be subject to mechanical damage they shall be protected by conduit.
PART 3 – EXECUTION
3.1 EXAMINATION
A. Verification of Conditions: Examine areas for compliance with requirements for installation
and conditions affecting performance of the Work. Identify conditions detrimental to a
proper and timely completion and notify the Client of the unsatisfactory conditions. Proceed
with installation only after unsatisfactory conditions have been corrected.
B. All wire and cable shall be examined prior to installation. Do not use wire and cable with
bruised, cut or abraded insulation, or wire that does not pass a continuity test.
Package 1 Combined Specification - Electrical
93 of 278 GC17105300
QPD-9-A14-1001
Doc. No: QPD-9-E14-0001
Package A Electrical Specification
Revision: F
Date: 20/12/2018
Revision of Detailed Design of Fit-Out Works
Page 94 of 278
at Qatar Petroleum District
A. The sizes of all main and sub-main cables shall be as indicated on the Design Drawings.
B. Sizes have been determined by reference to various factors including the relevant IEC, BSI
standards for cable rating, and ambient temperature of 50°C for cables installed inside the
complex and 85°c for cables installed exposed outside the complex and the run lengths
have been taken as the most direct route consistent with the main cable routes indicated on
the drawing. Should the Contractor deviate from the installation indicated, he shall re-
evaluate the cable sizes and provide full details for the Engineer's review. Any deviation
shall be agreed with the Client.
3.3 INSTALLATION
1. No cable installation work shall be carried out in temperatures at which the cable being
installed is likely to suffer damage.
2. The arrangement of cables and all methods of installation shall be reviewed by the
Client.
3. Cables shall be installed from terminal point to terminal point and straight through joints
shall not be made unless approved. Where a run of MICC cable is of a length which
exceeds the maximum which can be manufactured, a through joint of a pattern agreed
with the Client shall be permitted.
4. The radius of each bend or change in direction of the route of any cable shall not be
less than that laid down in the relevant table or current issues of the IEE Regulations
and the relevant British Standards Specification and shall not be less than the
manufacturer's recommended minimum.
5. The spacing of cable supports shall be those laid down from the relevant size and type
of cable in the current issue for the IEE Regulations, but the horizontal longitudinal
distance between wire armored cable support centers shall not exceed 1 meter, the
horizontal distance between support centers of unarmored cables shall not exceed
800mm and the distance between support centers for either type of cable on vertical
runs is not to exceed 1 meter. Cable of and less than 50mm external diameter shall be
supported at not less than 800mm centers.
Package 1 Combined Specification - Electrical
94 of 278 GC17105300
QPD-9-A14-1001
Doc. No: QPD-9-E14-0001
Package A Electrical Specification
Revision: F
Date: 20/12/2018
Revision of Detailed Design of Fit-Out Works
Page 95 of 278
at Qatar Petroleum District
a. Installed on racks.
d. Fixed to steelwork.
7. Single core cables forming a three phase group shall be fixed in trefoil cleats of the alloy
pattern. Flat formation may be used where specified.
B. Cables on Trays
1. Trays shall be adequately supported to prevent sagging by more than 3°. between fixed
points; all supporting steelwork shall be fixed at no more than 1m centers unless
otherwise specified.
3. All cables, other than pilot or control, when installed on trays shall not be in more than
one layer.
4. Clear spacing between power cables shall be equal to minimum twice the diameter of
the cable throughout the entire length of cables.
C. Cable Routes
1. The Contractor shall be responsible for ascertaining the lengths of all cables covered by
the Specification and to be supplied under this Contract.
2. Final cable routing details are to be issued to the Client for review.
D. Special Tools
1. One month prior to issue of Practical Completion Certificate, turn over to the Employer
all tools required for MICC cables installation:
04.Electrical
S.No. List of Items/ Manufacturer Website
Trade Group
Electrak(Legrand) https://www.legrand.co.uk/products/power-distribution/electrak/
Belden www.beldencables-emea.com/en/products/index.phtml
Lapp www.lappkabel.com
EAE https://www.eae.com.tr/EN
Ackermann https://www.ackermann.co.uk/
Barton https://www.hublebas.co.uk/
LANRIC www.lanric.com
EAE https://www.eae.com.tr/EN
Siemens www.siemens.com
ANNEXURE 3
COMPLIANCE STATEMENT
QPDT1-9-MAR-E-0005
ANNEXURE 4
COMPANY/MANUFACTURER PROFILE
From the Chairman
Doha Cables 3
Achieving Together Goals of QNV 2030
Positioned as the first cable manufacturer in Qatar, DOHA CABLES provides the
Qatari market with a new dimension supporting the country to maintain significant yet
sustainable economic development, contributing its share in achieving goals of Qatar
National Vision 2030.
DOHA CABLES was awarded a two years call off contract by Qatar General Electricity
and Water Corporation (Kahramaa) in May 2011. This contract has given DOHA
CABLES the opportunity to be a part of infrastructure projects accross the entire
country. Doha Cables 5
Over 25 Years of Manufacturing Expertise
DOHA CABLES is wholly managed by ELSEWEDY CABLES, benefiting from its vast
experience in cable manufacturing since 1984. ELSEWEDY CABLES has established
14 cable & cable accessories manufacturing facilities and industry related raw material
production plants in Egypt, Sudan, Algeria, Ethiopia, KSA, Yemen, Syria and Qatar,
delivering the largest capacity in the MENA Region – 220,000 tons of copper per annum.
DOHA CABLES is well-equipped and poised to grow multi-dimensionally to evolve into
the most advanced cable manufacturer and become a market leader not only in Qatar,
but in the entire GCC.
DOHA CABLES is proud to be a part of the ELSEWEDY ELECTRIC Group which is the
12th largest cable producer in the world* and the only producer from the MENA Region
among the world’s top 30.
Doha Cables 7
* According to report, published in 2011 by Integer Research Ltd
Doha Cables and Elsewedy Cables’ Relationship
ELSEWEDY CABLES established its regional office in Qatar in 2006. Since 2006, ELSEWEDY CABLES QATAR has become
a market leader, supplying major landmark projects in Qatar with top quality products from our manufacturing facility in Egypt.
With the success of ELSEWEDY CABLES QATAR an alliance was created with AAMAL Company Q.S.C. – one of the successful
Qatari conglomerates, spearheaded by the president of Qatari Businessmen Association, distinguished business leader and
very talented entrepreneur, Sheikh Faisal Bin Qassim Al Thani. With this alliance a new vision was born: to build a solid
private industrial sector in Qatar. With over 25 years of manufacturing expertise, ELSEWEDY CABLES established its latest
manufacturing facility in Qatar. Being the first cable manufacturer in Qatar, DOHA CABLES proudly reflects the national identity
of Qatar not only through its name but through its local product.
Doha Cables 9
From Cables to Integrated Energy and Telecom Solutions
ELSEWEDY ELECTRIC (formerly known as ELSEWEDY CABLES) is the leading integrated energy and telecom
solution provider, started its success story from family enterprise in electrical equipment business in 1938,
developing into international conglomerate that incorporates 30 production facilities in 14 countries of Europe,
Middle East, Africa and Asia, producing top quality products and providing services to cater diversified energy
and telecom markets through the following segments
Steel Lighting Poles & High Masts Arab Steel Fabrication (ASF)
Electrical Products Fiber Glass Lighting Poles Elsewedy Poles
Transformers Oil Immersed & Dry Cast Resin Transformers Elsewedy Transformers
The DOHA CABLES factory has achieved ISO DOHA CABLES utilizes cutting-edge
9001:2008, ISO 14001:2004 and OHSAS 18001: manufacturing and testing technologies and
2007 accreditation by SGS United Kingdom Ltd. techniques to produce top quality cables. Its
Systems & Services Certification. premises are equipped with the state-of-the-
DOHA CABLES’ cables comply with all related art facilities from the world’s most reputable
international and local standards including: IEC, manufacturers: PS, SICTRA, CORTINOVIS
BS, NEMA, VDE, CENELLEC, incorporating (Italy), NOKIA MAILLEFER (Finland),
special requirements of Qatar General Electricity NEIHOFF, PTL, ZWICK, HIGH VOLT,
and Water Corporation (KAHRAMAA) and Qatar ZUMBACH (Germany), KYOTO, OMEGA
Petroleum, and have been successfully type tested (UK), NIKON (Austria), SEFELEK (France),
in the testing laboratories of KEMA, Netherlands AESA CORTOLLAID, HIVOTEC (Switzerland)
and approved by local authorities, institutions, and MITUTOYO (Japan), PERKIN ELMER and
leading consultants. FLUKE (USA).
Doha Cables 13
PRODUCT RANGE
3.6/6 kV up to 19/33 kV CU/XLPE/SWA/PVC 6.35/11 kV up to 18/30 kV CU/XLPE/CWA/LEAD/HDPE 3.6/6 kV up to 19/33 kV 6.35/11 kV CU/XLPE/SWA/PVC
single core up to 1000 mm² single core up to 1000 mm² 3 cores up to 400 mm² 3 cores up to 300 mm²
Stranded circular compacted copper conductor Class 2, KAHRAMAA Requirements | stranded circular compacted or Stranded circular compacted copper conductor Class 2, KAHRAMAA Requirements | stranded circular compacted
inner semi conductive compound, cross linked polyethylene segmental copper conductor Class 2, inner semi conductive inner semi conductive compound, cross linked polyethylene copper conductor Class 2, inner semi conductive compound,
insulation, outer semi conductive compound, copper wire and/ compound, cross linked polyethylene insulation, outer semi insulation, outer semi conductive compound, copper wire and cross linked polyethylene insulation, outer semi conductive
or copper tape screen, polyvinyl chloride bedding, aluminum conductive compound, water blocking tape, copper wire and copper tape screen, non-hygroscopic filler and tape, polyvinyl compound, copper wire and copper tape screen, polyvinyl
wire armour, polyvinyl chloride outer sheath. copper tape screen, water blocking tape, lead alloy sheath, chloride bedding, galvanized steel wire armour, polyvinyl chloride inner feeling and cover, water blocking tape, galvanized
QP Requirements | sheath: polyvinyl chloride which has low bituminized tape or coating, high density polyethylene sheath chloride outer sheath. steel wire and galvanized steel tape armour, water blocking
smoke property and limited (>17%) acidic gas emission, flame and graphite coating. QP Requirements | sheath: polyvinyl chloride which has low tape, polyvinyl chloride outer sheath.
retardant Cat A, aliphatic hydrocarbon, moisture, oil, and anti- smoke property and limited (>17%) acidic gas emission, flame
termite resistant. Designed and manufactured according to international retardant Cat A, aliphatic hydrocarbon, moisture, oil, and anti- Designed and manufactured according to international
standards: IEC 60502-2, and in accordance with the specifi - termite resistant. standards: IEC 60502-2, and in accordance with the specifi -
Designed and manufactured according to international cations and requirements of KAHRAMAA. cations and requirements of KAHRAMAA.
standards: IEC 60502-2, BS 6622 and in accordance with the Designed and manufactured according to international
specifications and requirements of QP. standards: IEC 60502-2, BS 6622 and in accordance with the
specifications and requirements of QP.
Doha Cables 17
LSHF MV Power Cables LV Power Cables LSHF LV Power Cables LV Power Cables
3.6/6 kV up to 19/33 kV CU/XLPE/SWA/LSHF 0.6/1 kV CU/XLPE/CWA/PVC or CU/XLPE/AWA/PVC 0.6/1 kV CU/XLPE/CWA/LSHF or CU/XLPE/AWA/LSHF 0.6/1 kV CU/XLPE/SWA/PVC or CU/XLPE/TCW+SWA/PVC
3 cores up to 400 mm² single core up to 1000 mm² single core up to 1000 mm² 2, 3, 4, 5 cores up to 500 mm²
Stranded circular compacted copper conductor Class 2, Stranded circular copper conductor Class 2, cross linked Stranded circular copper conductor Class 2, cross linked Stranded circular or sector shaped copper conductor Class 2,
inner semi conductive compound, cross linked polyethylene polyethylene insulation, polyvinyl chloride bedding, aluminum polyethylene insulation, low smoke halogen free bedding with cross linked polyethylene insulation, non-hygroscopic filler and
insulation, outer semi conductive compound, copper wire and wire armour, polyvinyl chloride outer sheath. flame retardant property, aluminum wire or copper wire armour, tape – optional, polyvinyl chloride bedding, galvanized steel
copper tape screen, low smoke halogen free bedding with flame KAHRAMAA Requirements | armour: copper wire. low smoke halogen free outer sheath with flame retardant wire armour, polyvinyl chloride outer sheath.
retardant property, galvanized steel wire armour, and low smoke QP Requirements | sheath: polyvinyl chloride which has low property. KAHRAMAA Requirements | armour: tinned copper wire and
halogen free outer sheath with flame retardant property. smoke property and limited (>17%) acidic gas emission, flame Designed and manufactured according to international galvanized steel wire, with water blocking tape before and after
Designed and manufactured according to international retardant Cat A, aliphatic hydrocarbon, moisture, oil, and anti- standards: IEC 60502-1, BS 6724 and based on the principal armour.
standards: IEC 60502-2, and based on the principal of termite resistant. of KAHRAMAA. QP Requirements | sheath: polyvinil chloride which has low
KAHRAMAA. Designed and manufactured according to international smoke property and limited (>17%) acidic gas emission, flame
standards: IEC 60502-1, BS 5467 and in accordance with retardant Cat A, aliphatic hydrocarbon, moisture, oil, and anti-
the specifications and requirements of KAHRAMAA or QP. termite resistant.
Designed and manufactured according to international
standards: IEC 60502-1, BS 5467 and in accordance with
the specifications and requirements of KAHRAMAA or QP.
Doha Cables 19
LSHF
LSHF LV Power Cables Earthing Cables LSHF Earthing Cables Building Wires
Stranded circular or sector shaped copper conductor Class 2, Solid or stranded circular copper conductor Class 1 or Class Solid or stranded copper conductor Class 1 and Class 2 Solid or stranded copper conductor Class 1 or Class 2
cross linked polyethylene insulation, low smoke halogen free 2 respectively, polyvinyl chloride insulation, suitable for respectively, low smoke halogen free insulation with flame respectively, polyvinyl chloride insulation, suitable for
bedding with flame retardant property, galvanized steel wire operating temperature up to 70 ºC, 90 ºC or 105 ºC. retardant property, suitable for operating temperature up to operating temperature up to 70 ºC, 90 ºC or 105 ºC.
armour or tinned copper wire with steel wire armour, and low 90 ºC.
smoke halogen free outer sheath with flame retardant property. Designed and manufactured according to international Designed and manufactured according to international
standards: IEC 60227, BS 6004 or BS EN 50525. Designed and manufactured according to international standards: IEC 60227, BS 6004 or BS EN 50525.
Designed and manufactured according to international standards: BS 7211 or BS EN 50525.
standards: IEC 60502-1, BS 6724 and based on the principal
of KAHRAMAA.
Doha Cables 21
LSHF Building Wires Flexible Cables Control Cables LSHF Control Cables
450/750 V CU/LSHF 300/500 V CU/PVC/PVC 0.6/1 kV CU/XLPE/SWA/PVC or CU/XLPE/TCW+SWA/PVC 0.6/1 kV CU/XLPE/SWA/LSHF or CU/XLPE/TCW+SWA/LSHF
single core up to 35 mm² 2, 3, 4, 5 cores up to 25 mm² from 2 up to 61 cores up to 6 mm² from 2 up to 61 cores up to 6 mm²
Solid or stranded copper conductor Class 1 and Class 2 Flexible stranded copper conductor Class 5, polyvinyl chloride Solid or stranded copper conductor Class 1 and Class 2 Solid or stranded copper conductor Class 1 and Class 2
respectively, low smoke halogen free insulation with flame insulation, polyvinyl chloride sheath, suitable for operating respectively, cross linked polyethylene insulation, non- respectively, cross linked polyethylene insulation, low smoke
retardant property, suitable for operating temperature up to temperature up to 70 ºC or 90 ºC or 105 ºC. hygroscopic filler and tape – optional, polyvinyl chloride bedding, halogen free bedding with flame retardant property, galvanized
90 ºC. galvanized steel wire armour, polyvinyl chloride outer sheath. steel wire armour or tinned copper wire with steel wire armour,
Designed and manufactured according to international KAHRAMAA Requirements | armour: tinned copper wire and and low smoke halogen free outer sheath with flame retardant
Designed and manufactured according to international standards: IEC 60227, BS6004 or BS6500 or BS EN 50525. galvanized steel wire, water blocking tape before and after property.
standards: BS 7211 or BS EN 50525. armour.
QP Requirements | sheath: polyvinyl chloride which Designed and manufactured according to international
has low smoke property and limited (>17%) acidic gas emission, standards: IEC 60502-1, BS 6724 and based on the principal
flame retardant Cat A, aliphatic hydrocarbon, moisture, oil, and of KAHRAMAA.
anti-termite resistant.
0.6/1 kV CU/MICA/XLPE/SWA/LSHF 450/750 kV CU/MICA/LSHF or CU/MICA/XLPE/LSHF Wide range of cable designs for all type of applications with Bare Soft and Hard Drawn Copper Stranded Conductors
1, 2, 3, 4, 5 cores up to 400 mm² single core up to 800 mm² single mode and multi-mode fibers Design according to: IEC 60028-2 and DIN 48201 respectively
Aerial (ADSS) all dielectric self-supporting loose tube type dry All Aluminium Conductors (A.A.C.)
Stranded circular or sector shaped copper conductor Class Solid or stranded copper conductor Class 1 and Class 2 core cable Design according to: IEC 61089 or BS EN 50182
2, mica glass tape, cross linked polyethylene insulation, low respectively, mica glass tape, cross linked polyethylene Aerial (figure 8) self-supporting loose tube type dry core cable All Aluminium Alloy Conductors (A.A.A.C.)
smoke halogen free bedding with flame retardant property, insulation - optional, low smoke halogen free outer sheath Duct (non-metallic) loose tube type dry core cable Design according to: IEC 61089 or BS EN 50182 or
galvanized steel wire armour for multicore cables or aliminum with flame retardant property. Duct (metallic) loose tube type dry core cable ASTM B 399
wire armour for single core cables, and low smoke Duct uni-tube (non-metallic) central buffer tube type cable Aluminium Conductors Steel Reinforced (A.C.S.R.)
halogen free outer sheath with flame retardant property. Designed and manufactured according to international Duct direct buried (non-metallic) rodent protected loose tube
Design according to: IEC 61089 or BS EN 50182 or
type dry core cable
standards: IEC 60502-1, IEC 60331, BS 6387, and BS Duct direct buried (metallic) rodent protected loose tube type ASTM B 232
Designed and manufactured according to international 7846. dry core cable Copper Conductors, XLPE Insulated
standards: IEC 60502-1, IEC 60331, BS 6387, and BS Direct buried (non-metallic) loose tube type dry core cable Design according to: IEC 60228 and NEMA WC 7
7846. Direct buried (metallic) moisture free loose tube type dry core cable Aluminium Conductors, XLPE Insulated
Direct buried (metallic) rodent protected loose tube dry core cable Design according to: IEC 60228 and NEMA WC 7
Mini duct (non-metallic) loose tube type dry core cable
Light pack central buffer tube type cable
Triple sheath direct buried rodent protected loose tube type
dry core cable
Designed and manufactured according to international Doha Cables 25
standards: IEC 60793, IEC 60794
3rd Floor, KIA Motors Showroom bldg., Al Rayyan Road, Al Sadd,
P.O. Box 22487, Doha, Qatar
Tel.: (+974) 4455 30 43
Fax.: (+974) 4455 30 49
Email: [email protected]
www.dohacables.com
ANNEXURE 5
CR COPY
ANNEXURE 6
ISO & OTHER CERTIFICATES
CERTIFICATE OF CONFORMITY
BASEC hereby certifies that:
Doha Cables
MIC Community Area
Mesaieed
PO Box 22487
Doha
Qatar
SCOPE OF CERTIFICATION
Low Voltage PVC Single Core Building Wires. Low Smoke Zero Halogen Single Core Building
Wires. PVC Flexible Multicore Cables. Low Voltage XLPE Insulated with Armouring & PVC
Sheathed Power Cables. Low Voltage XLPE Insulated with Armouring & Low Smoke Zero
Halogen Sheathed Power Cables. Fire Resistance Cables.
Date of initial certification: 3rd June 2015 Expiry Date: 2nd June 2021
nd
Last certification cycle expiry date: 2 June 2018
04/06/2018
BSF121.004/A1746/Copy No. 1
CERTIFICATE OF CONFORMITY
BASEC hereby certifies that:
Doha Cables
MIC Community Area
Mesaieed
PO Box 22487
Doha
Qatar
SCOPE OF CERTIFICATION
Building Wires, Indoor Wires, Control and Low Voltage Cables up to 1 kV, Medium Voltage
Cables up to 36 kV, High Voltage Cables up to 150 kV, extra High Voltage Cables up to 220 kV,
Overhead Transmission Lines and Fire Resistance Cables and Wires.
Date of initial certification: 3rd June 2015 Expiry Date: 2nd June 2021
nd
Last certification cycle expiry date: 2 June 2018
Lack of fulfilment of conditions as set out in the certification agreement may render this Certificate invalid.
This certificate is issued subject to and in accordance with BASEC Regulations and continued compliance.
04/06/2018
Description Description
• Soft annealed solid or stranded Copper • Soft annealed Copper fine wires, bunched together
conductors insulated with LSHF compound rated in sub - units or stranded bunched groups into a main
90 °c according to BS 7211and BS EN 60332-1. units, which forms the flexible conductor.Insulated
with LHSF compund rated 90 °C.
Application • Cables are produced according to BS 7211 and
BS EN 60332-1
For indoor fixed installations in dry locations, laid
in conduits, as well as in steel support brackets.
Application
For indoor fixed installations in dry locations, where
particular flexibility is required. For electrical panels
Current rating in air
connection or for electrical apparatus they can be laid
Free Air Pipes
Nominal Max. Conductor in groups around steek sheets.
resistance Horizontal flat Vertical flat Enclosed in conduit on a wall
cross Terfoil
spaced spaced or in turnking etc.
Product - code sectional
area 2 cables, Single 2 cables, Single
3 cables, 2 cables,
phase a.c. or d.c. phase a.c. or d.c. 3 or 4 cables,
DC at AC at Free terfoil, Single phase
or 3 cables or 3 cables three phase
20 °C 90 °C three phases a.c. or d.c.
three phases three phases
Current rating in air
mm2 Ω/km Ω/km A Ω/km A A A A Free Air Pipes
Max. Conductor
COD-S001-U04 1.5 re 12.1000 15.4000 - - - 20 17 resistance Horizontal flat Vertical flat Enclosed in conduit on a wall
Nominal Terfoil
spaced spaced or in turnking etc.
COD-T001-U04 1.5 rm 12.1000 15.4000 - - - 20 17 cross
Product - code sectional 2 cables, Single 2 cables, Single
COD-S001-U06 2.5 re 7.4100 9.4500 - - - 27 23 3 cables, 2 cables,
area phase a.c. or d.c. phase a.c. or d.c. 3 or 4 cables,
DC at AC at Free terfoil, Single phase
COD-T001-U06 2.5 rm 7.4100 9.4500 - - - 27 23 or 3 cables or 3 cables three phases
20 °C 90 °C three phases a.c. or d.c.
three phases three phases
COD-S001-U08 4 re 4.6100 5.8800 - - - 36 31
COD-T001-U08 4 rm 4.6100 5.8800 - - - 36 31 mm2 Ω/km Ω/km A Ω/km A A A A
COD-T001-U12 25 rm 0.7270 0.9270 166 148 125 114 101 COD-F001-U10 10 1.9100 2.4360 - - - 64 57
COD-T001-U13 35 rm 0.5240 0.6690 205 184 155 141 125 COD-F001-U11 16 1.2100 1.5430 - - - 86 77
COD-T001-U14 50 rm 0.3870 0.4940 249 223 190 171 152 COD-F001-U12 25 0.7800 0.9550 166 148 125 114 101
COD-T001-U15 70 rm 0.2680 0.3430 319 289 245 218 194 COD-F001-U13 35 0.5540 0.7070 205 184 155 141 125
COD-T001-U16 95 rm 0.1930 0.2480 387 353 300 263 235 COD-F001-U14 50 0.3860 0.4930 249 223 190 171 152
COD-T001-U17 120 rm 0.1533 0.1970 450 412 350 305 272 COD-F001-U15 70 0.2720 0.3480 319 289 245 218 194
COD-T001-U18 150 rm 0.1240 0.1600 518 476 404 341 298 COD-F001-U16 95 0.2060 0.2640 387 353 300 263 235
COD-T001-U19 185 rm 0.0991 0.1290 592 546 465 387 336 COD-F001-U17 120 0.1610 0.2070 450 412 350 305 272
COD-T001-U20 240 rm 0.0754 0.0990 699 647 551 455 394 COD-F001-U18 150 0.1290 0.1670 518 476 404 341 298
COD-T001-U30 300 rm 0.0601 0.0810 805 749 637 520 448 COD-F001-U19 185 0.1060 0.1380 592 546 465 387 336
COD-T001-U40 400 rm 0.0470 0.0638 968 903 745 620 530 COD-F001-U20 240 0.0801 0.1050 699 647 551 455 394
The above data is approximate and subjected to manufacturing tolerance. re : Round, Solid
The above data is approximate and subjected to manufacturing tolerance.
rm : Round, Stranded
138 Low Smoke Halogene Free Low Smoke Halogene Free 139
ANNEXURE 8
TEST CERTIFICATE
MANUFACTURER
CLIENT
TESTED BY }##!?!Z?Z
DATE OF TESTS
==
=
TEST PROGRAMME ?
|"=~~`
SUMMARY AND ?
_
[
`
CONCLUSION
?Z
[ \]
\
[[
^
_
`?
[^\ \
^\^
_
{
|
|
}\
`
?
[ \~[
`
© Copyright: Only integral reproduction of this report is permitted without written
permission from KEMA. Electronic copies in e.g. PDF-format or scanned version of
this report may be available and have the status “for information only”.
~;~
The sealed and bound version of the report is the only valid version.
}
``
]```
}??
"
{
}
= ^=
SAMPLE ONLY
QUALITY CONTROL
DEPARTMENT
Voltage
Cable Conductor Resistance at 20°C
Continuity Test 2.5 kV
Pallet No. Color Length Max.4.610Ω/km Remarks
Test (AC) for 15
(ROL) Maximum Minimum Average Min.
Statement of Conformity
Doha Cables certifies that the cables as per the above mentioned number and length were tested in accordance with
the following International Standards: BS EN 60228 & BSEN 50525-3-41 (BS 7211), successfully passed these tests
and guarantees these cables against manufacturing defects according to the contract .
To : M/s. TRAGS
Doha, State of Qatar
WARRANTY CERTIFICATE
Item Product Description Cable Size (mm2) Voltage in KV
1 Cu/LSHF (Y/G) 1x2.5 0.45/0.75 kV
We hereby confirm that the above mentioned products shall be supplied to M/s.
TRAG for _________________ Project are of top quality materials, suitable design and
are guaranteed against any manufacturing defect for the period of 12 months from
the date of commissioning or 18 months from the date of delivery, whichever comes
earlier.
This warranty covers the repair or the replacement of any defective materials,
provided that such defects are due to reasons attributable to manufacturing or
workmanship.
This warranty shall be voided in the event of damage(s) sustained to the materials,
provided that such damages are not due to manufacturing defects or otherwise
attributable to the Contractor and / or client/owner, or any third party, or any of
their representatives, including but not limited to, any mishandling or non-
compliance of supplier’s instructions in respect of the usage of the materials.
The warranty lapses and shall be considered as void if the materials are not treated
in accordance with our instructions or is subjected to loads in excess of the specified
values or otherwise exposed to any circumstances contrary to the purpose for which
it was manufactured. Without prejudice to the foregoing, the validity of this warranty
may be revoked, at the discretion of the Supplier, in the event of delay and / or
beach of obligations of payment by the Buyer, at no liability whatsoever on Doha
Cables Qatar.
Mohsen Al Tandi
QA/QC Director
ANNEXURE 10
COUNTRY OF ORIGIN CERTIFICATE
ANNEXURE 11
TECHNICAL DATA SHEETS
ANNEXURE 12
MAJOR PROJECT REFERENCE
DOHA CABLES Reference List
PROJECT/ YEAR
CLIENT PROJECT CONSULTANT MATERIAL SUPPLIED VOLTAGE RATING QUANTITY (km)
PROJECT OWNER OF SUPPLY
Power Cables- PVC 0.6/1 kV 28.6
PETROSERV LIMITED DOHA PORT PROJECT ASTAD Earthing Cables- PVC 0.45/0.75 kV 6.6 2019
Building Wires - PVC 0.45/0.75 kV 19.6
Earthing Cables- PVC 0.45/0.75 kV 3.0
AL JABER ENGINEERING STRATEGIC FOOD SECURITY FACILITY DORSCH 2018
Building Wires - PVC 0.45/0.75 kV 270.5
Fire Guard 1000 0.6/1 kV 0.4
Power Cables- PVC 0.6/1 kV 15.6
Earthing Cables- LSHF 0.45/0.75 kV 0.9
AL KHAYARIN TRADING WLL ISF DUHAIL CAMP CPC08A AEB 2018
Earthing Cables- PVC 0.45/0.75 kV 9.0
Building Wires - LSHF 0.45/0.75 kV 150.3
Building Wires - PVC 0.45/0.75 kV 680.8
Fire Guard 1000 0.6/1 kV 2.1
Power Cables- PVC 0.6/1 kV 10.7
Earthing Cables- LSHF 0.45/0.75 kV 0.5
BOJAMHOOR MECHANICAL & ELECTRICAL NEW COLLEGE OF LAW BUILDING KHATIB & ALAMI 2018
Earthing Cables- PVC 0.45/0.75 kV 1.4
STATE OF QATAR
HAMAD INTERNATIONAL AIRPORT JET A1 SUPPLY & Power Cables- LSHF 0.6/1 kV 5.8
CCC STRATEGIC PETROLEUM PRODUCT STORAGE WORLEY PARSONS Power Cables- PVC 0.6/1 kV 268.8 2018
FACILITY AT RLIC Earthing Cables- PVC 0.45/0.75 kV 43.9
Building Wires - PVC 0.45/0.75 kV 52.5
DOHA CABLES Reference List
PROJECT/ YEAR
CLIENT PROJECT CONSULTANT MATERIAL SUPPLIED VOLTAGE RATING QUANTITY (km)
PROJECT OWNER OF SUPPLY
MEGATEC ELECTRO MECHANICAL NEW COLLEGE OF EDUCATION - QATAR UNIVERSITY KHATIB & ALAMI Building Wires - PVC 0.45/0.75 kV 720.0 2018
DOHA CABLES Reference List
PROJECT/ YEAR
CLIENT PROJECT CONSULTANT MATERIAL SUPPLIED VOLTAGE RATING QUANTITY (km)
PROJECT OWNER OF SUPPLY
Fire Guard 1000 0.6/1 kV 1.0
LA PLAGE SOUTH DEVELOPMENT INFRASTRUCTURE Power Cables- PVC 0.6/1 kV 15.3
MULTI ENERGY QATAR M Z AND PARTNERS 2018
WORKS Earthing Cables- PVC 0.45/0.75 kV 1.2
Building Wires - PVC 0.45/0.75 kV 2.0
Fire Guard 1000 0.6/1 kV 1.0
STREET LIGHTING & ELECTRICAL WORKS FOR ROAD Power Cables- PVC 0.6/1 kV 37.3
MULTI ENERGY QATAR & INFRASTRUCTURE FOR UMM SALAL INTEGRATED ITAL CONSULT 2018
WORKS ACCOMODATION COMMUNITY Earthing Cables- PVC 0.45/0.75 kV 6.8
Building Wires - PVC 0.45/0.75 kV 2.1
Fire Guard 1000 0.6/1 kV 7.8
Power Cables- LSHF 0.6/1 kV 16.1
AL-AJJAJ LIMITED CO MERCURE HOTEL PROJECT AEB 2018
Earthing Cables- LSHF 0.45/0.75 kV 4.1
Building Wires - LSHF 0.45/0.75 kV 16.3
Fire Guard 1000 0.6/1 kV 6.1
Fire Guard 100 0.45/0.75 kV 1.4
TWO RESIDENTIAL TOWERS IN PORTO ARABIA- 13A
STATE OF QATAR KEO Power Cables- PVC 0.6/1 kV 3.2 2018
& 13B
Earthing Cables- PVC 0.45/0.75 kV 1.3
STATE OF QATAR
BIN OMRAN TRADING & TELECOMMUNICATION NEW ORBITAL HIGHWAY 2 ARCADIS Power Cables- PVC 0.6/1 kV 62.9 2018
MV Cables 11 kV 2.5
BARWA AL BARAHA WAREHOUSE & WORKSHOP
QATAR BUILDING ENGINEERING CO. CEG Power Cables- PVC 0.6/1 kV 2.5 2018
PHASE 1
Earthing Cables- PVC 0.45/0.75 kV 14.2
DESIGN & PROJECT Power Cables- PVC 0.6/1 kV 1.3
RADIANT ENGINEERING ENTERPRISES VIVA BAHRIYA 08 2018
MANAGEMENT GROUP Building Wires - PVC 0.45/0.75 kV 325.5
Power Cables- PVC 0.6/1 kV 4.6
METRIX QATAR VIVA BAHRIYA 14 & 15 SHAKER Earthing Cables- PVC 0.45/0.75 kV 0.5 2018
Building Wires - PVC 0.45/0.75 kV 3.7
Power Cables- PVC 0.6/1 kV 1.1
DORCE PREFABRIK YAPI VE INSAAT SANAYIL UMM SALAL WORKSITE IN QATAR EHAF Building Wires - PVC 0.45/0.75 kV 777.4 2018
Flexible Cables 0.3/0.5 7.7
RESIDENTIAL BUILDINGS, WORKSHOP, SHOPS & Power Cables- PVC 0.6/1 kV 6.6
AL FAJER ENGINEERING
BATEC CONTRACTING AND TRADING ADMINISTRATION OFFICE BUILDING AT INDUSTRIAL Earthing Cables- PVC 0.45/0.75 kV 2.2 2018
CONSULTANT
AREA Building Wires - PVC 0.45/0.75 kV 4.1
Power Cables- PVC 0.6/1 kV 2.7
Power Cables- LSHF 0.6/1 kV 1.4
TEMPORARY POWER & CHILLED WATER 2018
STATE OF QATAR
PROJECT DIVISION ELSEWEDY AL BUSTAN STREET NORTH P007 C7 P2 PARSONS HV CABLES 132 kV 16.5 2017 - 2018
DOHA CABLES Reference List
PROJECT/ YEAR
CLIENT PROJECT CONSULTANT MATERIAL SUPPLIED VOLTAGE RATING QUANTITY (km)
PROJECT OWNER OF SUPPLY
SIEMENS WLL KM PHASE 12 CONTRACT NO. GTC/643A/2014 ENERGOPROJEKT ENTEL Power Cables- LSHF 0.6/1 kV 9.9 2017
MV Cables 11 kV 4.1
Pilot Cable 0.6/1 kV 4.9
CONSPEL J 55 NEW ORBITAL EXPRESSWAY CONTRACT AECOM 2017 - 2018
Power Cables- PVC 0.6/1 kV 153.6
Building Wires - PVC 0.45/0.75 kV 4.8
Power Cables- PVC 0.6/1 kV 4.7
AL NAKHEEL AGRICULTURE & TRADING NPP-0087 AECOM 2017
Earthing Cables- PVC 0.45/0.75 kV 4.7
Power Cables- PVC 0.6/1 kV 19.1
HOW UNITED SERVICES 5 STARS HOTEL DESIGN & CONSULT BUREAU Earthing Cables- PVC 0.45/0.75 kV 3.1 2017 - 2018
Building Wires - PVC 0.45/0.75 kV 10.3
Fire Guard 1000 0.6/1 kV 11.9
Fire Guard 100 0.45/0.75 kV 7.7
CONSOLIDATED CONTRACTORS GROUP QRDB PROJECT QRAIL Power Cables- LSHF 0.6/1 kV 46.5 2017 - 2018
Earthing Cables- LSHF 0.45/0.75 kV 7.6
Building Wires - LSHF 0.45/0.75 kV 598.5
STROM CONSTRUCTION AL SHAMAL BOTC PARSONS Power Cables- PVC 0.6/1 kV 216.5 2017
STATE OF QATAR
MV Cables 11 kV 1.2
Pilot Cable 0.6/1 kV 1.2
Fire Guard 1000 0.6/1 kV 0.2
Power Cables- PVC 0.6/1 kV 27.4
STROM CONSTRUCTION AL BAYT STADIUM KEO Power Cables- LSHF 0.6/1 kV 20.4 2017 - 2018
Earthing Cables- PVC 0.45/0.75 kV 16.3
Earthing Cables- LSHF 0.45/0.75 kV 10.9
Building Wires - PVC 0.45/0.75 kV 1.3
Building Wires - LSHF 0.45/0.75 kV 2.9
Fire Guard 1000 0.6/1 kV 5.2
Power Cables- PVC 0.6/1 kV 32.7
Earthing Cables- PVC 0.45/0.75 kV 5.6
ELECTROWATT EW159-ASHAMAL PROJECT AT ASHAMAL (P198) _ Building Wires - PVC 0.45/0.75 kV 24.1 2017
MV Cables 11 kV 0.6
Pilot Cable 0.6/1 kV 0.4
Flexible Cables 0.3/0.5 0.2
Fire Guard 1000 0.6/1 kV 8.4
Power Cables- LSHF 0.6/1 kV 12.6
Power Cables- PVC 0.6/1 kV 5.9
CONSTRUCTION DEVELOPMENT CO ALFP COMMERCIAL DEV AT COM 13 LUSAIL AEB 2017 - 2018
Earthing Cables- LSHF 0.45/0.75 kV 3.5
Building Wires - LSHF 0.45/0.75 kV 63.2
Building Wires - PVC 0.45/0.75 kV 6.0
Power Cables- PVC 0.6/1 kV 23.7
ELECTROWATT EW 154 EL _ Earthing Cables- PVC 0.45/0.75 kV 3.1 2017 - 2018
Building Wires - PVC 0.45/0.75 kV 16.4
DOHA CABLES Reference List
PROJECT/ YEAR
CLIENT PROJECT CONSULTANT MATERIAL SUPPLIED VOLTAGE RATING QUANTITY (km)
PROJECT OWNER OF SUPPLY
MV Cables 11 kV 3.3
ACCESS ROAD TO JERY AL SAMUR LOGISTICS CITY & Power Cables- PVC 0.6/1 kV 21.0
GULF SYSTEMS FOR CONTRACTING & SERVICES INTEGRATED WORKER ACCOMODATION IN UM KEO Earthing Cables- PVC 0.45/0.75 kV 4.4 2017 - 2019
SALAL Building Wires - PVC 0.45/0.75 kV 9.6
Bare Copper _ 7.0
Fire Guard 1000 0.6/1 kV 10.2
Power Cables- PVC 0.6/1 kV 26.9
POWERMECH ENGINEERING APARTMENT COMPLEX AT OLD AIRPORT AREA CEG INTERNATIONAL Earthing Cables- PVC 0.45/0.75 kV 27.6 2017
Building Wires - PVC 0.45/0.75 kV 0.2
Building Wires - LSHF 0.45/0.75 kV 7.8
MV Cables 11 kV 2.9
DESIGN OF ENERGY CENTRES FOR AL WAKRAH Power Cables- LSHF 0.6/1 kV 6.9
TAKYEEF ELECTROMECHANICAL ECG 2017
STADIUM Earthing Cables- LSHF 0.45/0.75 kV 5.4
STATE OF QATAR
QDVC Q.S.C LRT PROJECT LRT PHASE 2C2 UNDERGROUND STATIONS QRAIL Power Cables- LSHF 0.6/1 kV 187.8 2017 - 2018
Earthing Cables- LSHF 0.45/0.75 kV 82.5
Building Wires - LSHF 0.45/0.75 kV 148.7
Power Cables- PVC 0.6/1 kV 4.5
AL SULAITEEN AGRICULTURAL & INDUSTRIAL SC MURCERY QDC Earthing Cables- PVC 0.45/0.75 kV 1.4 2017
Building Wires - PVC 0.45/0.75 kV 0.9
Fire Guard 1000 Plus 0.6/1 kV 0.1
Fire Guard 1000 0.6/1 kV 0.2
SEF CONSTRUCTION PTE LTD EZDAN PALACE HOTEL MZ & PARTNERS Power Cables- PVC 0.6/1 kV 4.5 2017
Earthing Cables- PVC 0.45/0.75 kV 2.1
Building Wires - PVC 0.45/0.75 kV 1.6
Fire Guard 1000 0.6/1 kV 0.7
Power Cables- PVC 0.6/1 kV 7.8
SEF CONSTRUCTION PTE LTD EZDAN MALL 3 EHAF 2017
Earthing Cables- PVC 0.45/0.75 kV 0.3
Building Wires - PVC 0.45/0.75 kV 8.3
Power Cables- LSHF 0.6/1 kV 24.7
HOW UNITED SERVICES PHASE 12 NCC SUBSTATIONS PARSONS Earthing Cables- PVC 0.45/0.75 kV 2.0 2017
Building Wires - PVC 0.45/0.75 kV 13.7
Fire Guard 1000 0.6/1 kV 18.2
Power Cables- PVC 0.6/1 kV 1,990.6
TRINITY ENGINEERING SERVICES WLL ABRAJ QUARTIER AQ 3 & AQ 4 KEO Earthing Cables- PVC 0.45/0.75 kV 7.5 2017 - 2018
Earthing Cables- LSHF 0.45/0.75 kV 4.7
Building Wires - PVC 0.45/0.75 kV 25.6
16348 AL ASMAKH T-16705 WAREHOUSE & MV CABLES 11 kV 7.5
Q-TEC GROUP LTD UDC 2017
LOGISTICS AT BU FUSEELA PROJECT Power Cables- PVC 0.6/1 kV 1.6
DOHA CABLES Reference List
PROJECT/ YEAR
CLIENT PROJECT CONSULTANT MATERIAL SUPPLIED VOLTAGE RATING QUANTITY (km)
PROJECT OWNER OF SUPPLY
MV CABLES 11 kV 40.9
INTERTEK TRADING & CONTRACTING AL KHOR EXPRESSWAY HYDER CONSULTING Pilot Cable 0.6/1 kV 40.7 2017 - 2018
Power Cables- PVC 0.6/1 kV 46.3
MV CABLES 11 kV 1.0
Pilot Cable 0.6/1 kV 1.2
Fire Guard 1000 0.6/1 kV 28.8
ELECTRO MEACHANICAL ENGG CO. ENERGY CITY QATAR ABS INTERNATIONAL Power Cables- LSHF 0.6/1 kV 12.0 2017
Power Cables- PVC 0.6/1 kV 41.5
Earthing Cables- PVC 0.45/0.75 kV 9.0
Building Wires - PVC 0.45/0.75 kV 28.8
SUEZ MIDDLE EAST WATER SERVICES LLC ASPIRE TSE PLANT ACE Power Cables- LSHF 0.6/1 kV 14.3 2017
CCC RAWDAT ABAL HEERAN PACKAGE 2 ATKINS Power Cables- PVC 0.6/1 kV 7.8 2017
Fire Guard 1000 Plus 0.6/1 kV 21.1
Fire Guard 100 0.45/0.75 kV 13.6
Power Cables- LSHF 0.6/1 kV 96.9
Power Cables- PVC 0.6/1 kV 11.7
STATE OF QATAR
MV CABLES 11 kV 1.6
Power Cables- LSHF 0.6/1 kV 195.8
VOLTAS QATAR WLL- VAFE JV VENDOME MALL PROJECT SALFO AND ASSOCIATES Earthing Cables- LSHF 0.45/0.75 kV 75.2 2017 - 2018
STATE OF QATAR
CONSTRUCTION OF AL WAJBA RESIDENTIAL AL SADD CONSULTING Power Cables- PVC 0.6/1 kV 33.2
STREAM 2016
COMPOUND ENGINEERING Building Wires - PVC 0.45/0.75 kV 1,668.2
Power Cables- PVC 0.6/1 kV 18.4
PORR SAUDI BINLADIN HBK-JV DOHA METRO GREEN LINE _ Earthing Cables- LSHF 0.45/0.75 kV 6.7 2016 - 2018
Earthing Cables- PVC 0.45/0.75 kV 17.6
Power Cables- LSHF 0.6/1 kV 47.69
Earthing Cables- LSHF 0.45/0.75 kV 13.4
VOLTAS QATAR W.L.L NORTH GATE MALL ECG Building Wires - LSHF 0.45/0.75 kV 24.7 2016
Fire Guard 100 0.45/0.75 kV 8.5
Fire Guard 1000 0.6/1 kV 44.17
MV CABLES 6.35/11 kV 2.6
CONTRACO CONSTRUCTION & DEVELOPMENT OF QF ASTAD 2016
Pilot Cable 0.6/1 kV 2.6
Power Cables- LSHF 0.6/1 kV 4.9
STREAM WEST BAY MEDICAL CENTER MZ & PARTNERS Earthing Cables- LSHF 0.45/0.75 kV 1.9 2016
Building Wires - LSHF 0.45/0.75 kV 2.8
HV CABLES 66 kV 17.3
Earthing Cables- PVC 0.45/0.75 kV 6.6
LARSEN & TOUBRO LIMITED LUSAIL REAL ESTATE DEVELOPMENT CO. DORSCH 2016 - 2017
Building Wires - PVC 0.45/0.75 kV 3.4
Bonding Cables - PVC 3.6/6 kV 9.3
GENERIC ENGINEERING TECHNOLOGIES YOUSSEF KAMAL DIWAN ARCHITECTS Building Wires - PVC 0.45/0.75 kV 539.9 2016
Power Cables- LSHF 0.6/1 kV 10.0
ARABIAN MEP CONTRACTING W.L.L. PHASE XII SUBSTATION FOR BUL HUMAID ENERGOPROJEKT ENTEL Earthing Cables- PVC 0.45/0.75 kV 2.9 2016
Building Wires - PVC 0.45/0.75 kV 6.7
DOHA CABLES Reference List
PROJECT/ YEAR
CLIENT PROJECT CONSULTANT MATERIAL SUPPLIED VOLTAGE RATING QUANTITY (km)
PROJECT OWNER OF SUPPLY
LIGHTNING ELECTROMECHANICAL CAR PARK 1,2,3 & 3B KEO Fire Guard 1000 0.6/1 Kv 33.8 2016
Power Cables- PVC 0.6/1 Kv 3.7
Power Cables- LSHF 0.6/1 Kv 15.4
Earthing Cables - LSHF 0.45/0.75 kV 34.4
ANEL MEP (DOHA RED LINE SOUTH) Construction of Doha - Metro Red Line South UG JACOBS/QRAIL Building Wires - LSHF 0.45/0.75 kV 954.1 2016 - 2018
Fire Guard 100 0.45/0.75 kV 961.6
Fire Guard 1000 0.6/1 Kv 435.3
Fire Guard 1000 Plus 0.6/1 Kv 436.9
ELECTROWATT MARINA TOWER COM 5 OFFICE TOWER _ Fire Guard 1000 0.6/1 Kv 16.9 2016
CONSOLIDATED CONTRACTORS GROUP DUKHAN HIGHWAY PROJECT - PHASE 2 ATKINS Power Cables- PVC 0.6/1 Kv 35.1 2015
Power Cables- PVC 0.6/1 kV 270.2
Earthing Cables - PVC 0.45/0.75 kV 7.6
AL HABTOOR LEIGHTON AL JABER JV NEW ORBITAL HIGHWAY PHASE 3 AECOM 2016 - 2018
Building Wires- PVC 0.45/0.75 kV 152.6
MV CABLES 6.35/11 kV 66.0
Power Cables- PVC 0.6/1 kV 19.4
ETA STAR ENGINEERING (QACC WORKERS GHARNATA CONSULTANT
Worker's Hospital Building Wires- PVC 0.45/0.75 kV 12.8 2016
STATE OF QATAR
HOSPITAL) ENGINEER
Earthing Cables - PVC 0.45/0.75 kV 7.1
Power Cables- LSHF 0.6/1 kV 57.4
Building Wires- LSHF 0.45/0.75 kV 287.0
MIDMAC SIXCO JV Renovation of Khalifa Stadium and Museum DAR AL HANDASAH 2016
Building Wires- PVC 0.45/0.75 kV 16.2
Earthing Cables - PVC/LSHF 0.45/0.75 kV 14.1
Power Cables- PVC 0.6/1 kV 21.2
BOJAMHOOR MECHANICAL & ELECTRICAL PROPOSED DEVELOPMENT OF BARZAN CAMP ARAB ENGINEERING BUREAU Building Wires- PVC 0.45/0.75 kV 4.9 2016
Earthing Cables - PVC/LSHF 0.45/0.75 kV 4.5
Power Cables- PVC 0.6/1 kV 7.6
Building Wires- PVC 0.45/0.75 kV 7.1
BOJAMHOOR MECHANICAL & ELECTRICAL AL BIDDA CAR PARK CP 5 & 6 KEO 2016
Fire Resistant Cables 0.6/1 kV 11.2
Earthing Cables - PVC/LSHF 0.45/0.75 kV 3.2
Power Cables- PVC 0.6/1 kV 9.0
Building Wires- PVC 0.45/0.75 kV 155.7
11 KV Cables 6.35/11 kV 3.0
VOLTAS QATAR HAMAD AL FUTTAIM Pilot Cable 0.6/1 kV 3.0
DOHA FESTIVAL CITY AEB 2016
VAFE - JV Earthing Cables - PVC 0.45/0.75 kV 4.8
Power Cables- LSHF 0.6/1 kV 25.7
Earthing Cables - LSHF 0.45/0.75 kV 7.5
Building Wires- LSHF 0.45/0.75 kV 87.6
Power Cables- PVC 0.6/1 kV 11.7
MV CABLES 11 kV 37.7
Pilot Cable 0.6/1 kV 28.5
Fire Guard 1000 0.6/1 kV 0.2
Power Cables- LSHF 0.6/1 kV 13.9
DAEWOO E & C NEW ORBITAL HIGHWAY & TRUCK ROUTE PROJECT AECOM Power Cables- PVC 0.6/1 kV 145.1 2015-2018
Earthing Cables - LSHF 0.45/0.75 kV 8.3
Earthing Cables - PVC 0.45/0.75 kV 220.0
Building Wires- LSHF 0.45/0.75 kV 160.2
Flexible Cables 0.3/0.5 kV 19.9
Fire Guard 1000 0.6/1 kV 35.1
Power Cables- PVC 0.6/1 kV 10.3
CONSOLIDATED CONTRACTORS GROUP DUKHAN HIGHWAY PROJECT - PHASE 2 ATKINS Earthing Cables - PVC 0.45/0.75 kV 13.6 2015
Building Wires- LSHF/PVC 0.45/0.75 kV 5.8
MV CABLES 6.35/11 kV 11.5
COWI/CH2M HILL/HYDER
HBK ENGINEERING LUSAIL WATER FRONT MV CABLES 6.35/11 kV 7.2 2015
CONSULTING
Power Cables- PVC 0.6/1 kV 8.8
STATE OF QATAR
TAKYEEF LES ROSES 3 (130 VILLAS) MZ & PARTNERS Earthing Cables - PVC 0.45/0.75 kV 3.9 2015
Building Wires- LSHF/PVC 0.45/0.75 kV 5.2
LARSEN & TOUBRO KAHRAMAA GTC/488D/12/PHASE XI ENERGOPROJEKT ENTEL MV CABLES 11 KV 7.5 2015
MV CABLES 6.35/11 kV 41.2
LARSEN & TOUBRO WAKRA BYPASS ROAD HALCROW/ CH2M HILL 2015
Power Cables- PVC 0.6/1 kV 61.9
Power Cables- PVC 0.6/1 kV 54.1
CONSTRUCTION OF 4 NEW SCHOOLS PACKAGE 4
STERLING & WILSON ARAB ENGINEERING BUREAU Earthing Cables - PVC 0.45/0.75 kV 11.6 2015
(STAGE 9)
Building Wires- LSHF/PVC 0.45/0.75 kV 10.5
Power Cables- PVC 0.6/1 kV 74.4
Power Cables- LSHF 0.6/1 kV 27.0
QATAR ELECTRO MECHANICAL GROUP THE BREEDING FARM ARAB CONSULTING ENGINEERS Earthing Cables- PVC 0.6/1 kV 6.5 2015
ADC ENERGY SYSTEMS QATAR MARINA DISTRICT COOLING PLANT PHASE 1 LUSAIL 2015
Earthing Cables -PVC 0.45/0.75 kV 4.4
Building Wires- PVC 0.45/0.75 kV 3.4
TRELCO AL GHARIYA RESORT _ Flexible Cables 0.3/0.5 3.5 2015
Power Cables- PVC 0.6/1 kV 72.0
AL JABER LANDSCAPE LUSAIL PACKAGE CP10C2 DORSCH Earthing Cables - PVC 0.45/0.75 kV 2.0 2015
Building Wires- PVC 0.45/0.75 kV 70.0
MV CABLES 6.35/11 kV 8.0
GENERIC ENGINEERING COAST GUARD BASE DAR AL HANDASAH Power Cables- PVC 0.6/1 kV 55.0 2015
Earthing Cables - PVC 0.45/0.75 kV 37.0
GENERIC ENGINEERING AL MAJIDA FARM LOUIS BERGER Flexible Cables 0.3/0.5 13.7 2015
Power Cables- PVC 0.6/1 kV 8.0
GHARNATA CONSULTANT
BOJAMOOR STAND ALONE HEALTH CENTER 81 Earthing Cables - PVC 0.45/0.75 kV 2.4 2015
ENGINEER
Building Wires- PVC 0.45/0.75 kV 3.0
MV CABLES 6.35/11 kV 16.6
VOLTAS QATAR HAMAD AL FUTTAIM
DOHA FESTIVAL CITY ARAB ENGINEERING BUREAU Power Cables- LSHF/PVC 0.6/1 kV 15.4 2015
VAFE - JV
Building Wires- LSHF/PVC 0.45/0.75 kV 800.0
AL WAKRA METRO SOUTH CAMP & Power Cables- PVC 0.6/1 kV 25.9
AKTOR QATAR _ 2015
METRO CAMP Building Wires- PVC 0.45/0.75 kV 13.0
ELECTRO MECHANICAL ENGINEERING ROADS AND INFRASTRUCTURE IN WAKRAH WEST Power Cables- PVC 0.6/1 kV 60.0
PARSONS 2015
SERVICES CO. MMUP PH.2, PKG14 (PACKAGE 1) Building Wires- PVC 0.45/0.75 kV 55.0
LV Power Cables
0.6/1 kV 10.5
ARABIAN MEP Polysilicon PUNJ LLYOD ENGINEERING (QP SPECS.) 2015
Earthing Cables 0.45/0.75 kV 10.0
LV Power Cables 0.6/1 kV 8.9
AL AJJAJ Qatar Foundation Nursery ASTAD Earthing Cables 0.45/0.75 kV 3.1 2015
Flexible Cables 0.3/0.5 11.3
ELECTRO MECHANICAL Street Lighing works in Qatar North LV Power Cables
_ 0.6/1 kV 1.2 2015
ENGINEERING SERVICES and other areas in Qatar (Kharamaa Specs.)
LV Power Cables - LSHF 0.6/1 kV 31.5
ELECTRO MECHANICAL
Shooting Range BP 2 LOUIS BERGER Earthing Cables - LSHF 0.45/0.75 kV 18.6 2014
ENGINEERING CO
Earthing Cables 0.3/0.5 11.0
HAMAD AL FUTTAIM Mandarin JOHN MCASLAN + PARTNERS Building Wires - LSHF 0.45/0.75 kV 1,810.0 2014
LV Power Cables 0.6/1 kV 5.3
ORIENT STAR Al khessa Hypermarket _ 2014
Earthing Cables 0.45/0.75 kV 5.8
LV Power Cables - LSHF 0.6/1 kV 3.2
HOW UNITED Al Jazeera 360 KEO 2014
Earthing Cables - LSHF 0.45/0.75 kV 4.2
MV CABLES 6.35/11 kV 25.0
CONSPEL Construction of New Orbital Expressway HALCROW 2014
Pilot Cable 0.6/1 kV 25.0
SIEMENS W.L.L. QSC-1 220/66kV Substation MOTT MACDONALD HV CABLES 38/66 kV 1.0 2014
Qatar Power Transmission System Expansion-Phase 11
LARSEN & TOUBRO ENERGOPROJEKT ENTEL 66 kV Cables 38/66 kV 1.0 2014
Stage 1 - GTC-488D/2012
URBACON Souq Waqif Car Park PARSONS LV Power Cables 0.6/1 kV 1.8 2014
LV Power Cables - LSHF
0.6/1 kV 5.8
SHINBO Hamad Medical City (CP 300B) KEO (Unarmored) 2014
Earthing Cables - LSHF 0.45/0.75 kV 19.3
DOHA CABLES Reference List
PROJECT/ YEAR
CLIENT PROJECT CONSULTANT MATERIAL SUPPLIED VOLTAGE RATING QUANTITY (km)
PROJECT OWNER OF SUPPLY
ETA STAR ENGINEEING MPH at Lusail KEO LV Power Cables - LSHF 2014
0.6/1 kV 6.8
(Unarmored)
Earthing Cables - LSHF 0.45/0.75 kV 2.0
LV Power Cables LSHF 0.6/1 kV 18.4
LV Power Cables -
STERLING & WILSON South East Car Park PARSONS 0.6/1 kV 1.0 2014
Single Core LSHF
Earthing Cables - LSHF 0.45/0.75 kV 15.3
DOHA CABLES Reference List
PROJECT/ YEAR
CLIENT PROJECT CONSULTANT MATERIAL SUPPLIED VOLTAGE RATING QUANTITY (km)
PROJECT OWNER OF SUPPLY
ETA STAR INTERNATIONAL Qatar Power Transmission System Expansion Phase 11 ENERGO PROJEKT Bonding Cables 3.6/6 3 2014
Stage 1 Package C4, C8 & C10
LV Power Cables 0.6/1 kV 14
EFECO RADIANT JV Sheraton Doha Renovation JAIN & PARTNERS 2014
Earthing Cables 0.45/0.75 kV 14.9
MV CABLES 6.35/11 kV 6.3
HYUNDAI Lusail Expressway Project CDM / KBR 2014
Pilot Cables 0.6/1 kV 6.3
LV Power Cables 0.6/1 kV 6.7
SMART POWER ELECTRICAL TB Unit Al Rumailah Hospital KEO Earthing Cables 0.45/0.75 kV 5.2 2014
Building Wires 0.45/0.75 kV 26
LV Power Cables 0.6/1 kV 15.5
ARAB ARCHITECT, JAIN &
STRUCTUREL SDH Earthing Cables 0.45/0.75 kV 17.9 2014
PARTNERS, EHAF AND SHAKER
Earthing Cables (LSHF) 0.45/0.75 kV 1.5
LV Power Cables
0.6/1 kV 7.3
ARABIAN MEP Polysilicon PUNJ LLYOD ENGINEERING (QP SPECS.) 2014
Earthing Cables 0.45/0.75 kV 4.2
LV Power Cables 0.6/1 kV 10.9
ETA STAR ENGINEERING Qatar University - College of Engineering MIMAR EMIRATES ENGINEERING 2014
Earthing Cables 0.45/0.75 kV 15.5
LV Power Cables -CWA 0.6/1 kV 0.5
LV Power Cables 0.6/1 kV 69.9
THE BEST TRADING New Regiment Camp in Duhailiyat ARMY 2014
Earthing Cables 0.45/0.75 kV 28.7
Building Wires 0.45/0.75 kV 22.4
Fire Guard 1000 Plus 0.6/1 kV 2.2
Fire Guard 100 0.45/0.75 kV 112.9
GALFAR AL MISNAD Qatar Rail Doha Red Line COWI 2014 - 2018
LV Power Cables 0.6/1 kV 10.7
Earthing Cables 0.45/0.75 kV 9.2
DOHA CABLES Reference List
PROJECT/ YEAR
CLIENT PROJECT CONSULTANT MATERIAL SUPPLIED VOLTAGE RATING QUANTITY (km)
PROJECT OWNER OF SUPPLY
(Kharamaa Specs.)
Earthing Cables 0.45/0.75 kV 8.5
MV CABLES 6.35/11 kV 14.7
Pilot Cables 0.6/1 kV 14.5
ELECTRO MECHANICAL ENGINEERING COMPANY Shooting Range BP 2 LOUIS BERGER 2014
LV Power Cables
0.6/1 kV 1.4
(Kharamaa Specs.)
MV CABLES 6.35/11 kV 0.5
Pilot Cables 0.6/1 kV 0.5
COMBINED GROUP Bani Hajer North Phase 1 HYDER CONSULTING 2014
LV Power Cables -Single Core
0.6/1 kV 4.0
(Kahramaa Specs.)
LV Power Cables
0.6/1 kV 0.7
(Kahramaa Specs.)
MV CABLES 6.35/11 kV 3.8
NATIONAL CONTRACTING COMPANY Hamad Medical City KEO LV Power Cables -Single Core 2013
0.6/1 kV 0.3
(Kahramaa Specs.)
HBK ENGINEERING Gulf Mall AEB Building Wires 0.45/0.75 kV 293 2013
LV Power Cables 0.6/1 kV 8.0
FAHD ALREIZA CONSULTING &
DOHA SWITCHGEAR FBA Mall Earthing Cables 0.45/0.75 kV 9.9 2013
DESIGN
Building Wires 0.45/0.75 kV 41.4
LV Power Cables 0.6/1 kV 12.7
DOHA SWITCHGEAR White Square Tower M&Z PARTNERS 2013
Earthing Cables 0.45/0.75 kV 24.5
LV Power Cables
0.6/1 kV 87.5
(QP Specs.)
LV Power Cables-Unarmored
TARGET ENGINEERING QP Halul _ 0.6/1 kV 37.4 2013
(QP Specs.)
Earthing Cables 0.45/0.75 kV 56.9
Building Wires 0.45/0.75 kV 442.0
MV CABLES 6.35/11 kV 0.7
Pilot Cables 0.6/1 kV 0.5
ADCC Multi-purpose Hall at Al Saad Sports Club JAMES CUBITT & PARTNERS LV Power Cables 0.6/1 kV 51.03 2013
LV Power Cables
0.6/1 kV 51.45
(Unarmored)
Building Wires (LSHF) 0.45/0.75 kV 466.8
DARA ENGINEERING & MV CABLES 6.35/11 kV 10.5
AL SEAL CONTRACTING Doha Mall 2013
CONSULTANT Pilot Cables 0.6/1 kV 4.5
DOHA CABLES Reference List
PROJECT/ YEAR
CLIENT PROJECT CONSULTANT MATERIAL SUPPLIED VOLTAGE RATING QUANTITY (km)
PROJECT OWNER OF SUPPLY
EUROTECH ENGINEERING & TRADING Various Domestic Projects in Qatar - Earthing Cables 0.45/0.75 kV 6.0 2012
Building Wires 0.45/0.75 kV 303.6
MV CABLES 6.35/11 kV 3.5
CONSOLIDATED CONTRACTORS GROUP Dukhan Highway ATKINS 2012
Pilot Cables 0.6/1 kV 3.5
LV Power Cables 0.6/1 kV 48.9
FALKLAND ELECTRICAL & TRADING CO. Various Domestic Projects in Qatar _ Earthing Cables 0.45/0.75 kV 55.1 2012-2013
Building Wires 0.45/0.75 kV 4,611.0
GALFAR AL MISNAD Alaqaria (QREIC) - 11kV HV Networks Mesaieed KAHRAMAA MV CABLES 6.35/11 kV 5.5 2012
Pilot Cables 0.6/1 kV 6.0
AL-AJJAJ LIMITED CO. (AALCO) L&T - 4706 KEO MV CABLES 6.35/11 kV 7.0 2012
Pilot Cables 0.6/1 kV 7.0
Global Village Camp Permanent Power System of QP QATAR PETROLEUM / QATAR MV Cables 6.35/11 kV 11.0
QATAR KENTZ 2012
at Ras Laffan GAS Bonding Cables - PVC 3.6/6 kV 1.0
LV Power Cables 0.6/1 kV 77.1
DOHA SWITCHGEAR CO. Wakra Mall - 2012
Earthing Cables 0.45/0.75 kV 39.8
MEGATEC Porto Arabia Parcel 3A & 3B UDC LV Power Cables 0.6/1 kV 26.0 2012
MV CABLES 6.35/11 kV 24.0
POWER PROJECTS QATAR/CCC Doha Expressway - F-Ring Road/Ashghal KEO/KBR 2011
Pilot Cables 0.6/1 kV 24.0
LV Power Cables 0.6/1 kV 3.4
AL GHORAIRI & PARTNERS Beach Ball Court QATAR DESIGN CONSORTIUM 2011
Earthing Cables 0.45/0.75 kV 1.4
MV CABLES 6.35/11 kV 1.9
LARSEN & TOUBRO Sewage Treatment Plant ASHGHAL 2011
Pilot Cables 0.6/1 kV 1.9
MV CABLES 6.35/11 kV 43.75
CONSOLIDATED CONTRACTORS GROUP Dukhan Highway ATKINS Pilot Cables 0.6/1 kV 43.8 2011
LV Power Cables 0.6/1 kV 136.9
DOHA CABLES Reference List
PROJECT/ YEAR
CLIENT PROJECT CONSULTANT MATERIAL SUPPLIED VOLTAGE RATING QUANTITY (km)
PROJECT OWNER OF SUPPLY
Doha North Sewerage Treatment Plant- PS 70 & LV Power Cables 0.6/1 kV 38.2
VINCI COSNTRUCTION/
GROUPE ENTREPOSE CONTRACTING Pumping Mains / 2011
QDVC
ASHGHAL Earthing Cables 0.45/0.75 kV 3.2
STREAM AL Waab City WHITE YOUNG QATAR LV Power Cables 6.35/11 kV 0.5 2011
JAIDAH MOTORS AND TRADING Various Domestic Projects in Qatar _ Building Wires 0.45/0.75 kV 2,200.0 2010
FALKLAND ELECTRICAL & TRADING CO. Various Domestic Projects in Qatar _ LV Power Cables 0.6/1 kV 15.0 2010
DOHA CABLES Reference List
PROJECT/ YEAR
CLIENT PROJECT CONSULTANT MATERIAL SUPPLIED VOLTAGE RATING QUANTITY (km)
PROJECT OWNER OF SUPPLY
KAHRAMAA Aluminium Conductor Steel
STATE OF QATAR
Panalpina Warehouse
QATAR GAS _ LV Power Cables 0.6/1 kV 30.0 2010
at Ras Laffan
Federal Electricity and water Authority (FEWA) Contract No 77E _ LV Power Cables 0.6/1 kV 40.0 2015 - 2016
Federal Electricity and water Authority (FEWA) Contract No 4000001167 _ Bare Copper Cables - 40.0 2015 - 2016
Federal Electricity and water Authority (FEWA) Contract No 98E _ LV Power Cables 0.6/1 kV 90.0 2016 - 2017
TURKMENISTAN
AL KAZEMI INTERNATIONAL Various Domestic Projects in Kuwait _ LV & MV Power Cables 0.6/1 kV 1.0 2010-2011
KUWAIT
Terna / Crown Electromechanical Al Lawzi Villas - PPP Housing Ansari Engineering Services LV Power Cables 0.6/1 kV & 0.45/0.75 Kv 20.0 2014 - 2016
DOHA CABLES Reference List
PROJECT/ YEAR
CLIENT PROJECT CONSULTANT MATERIAL SUPPLIED VOLTAGE RATING QUANTITY (km)
PROJECT OWNER OF SUPPLY
Kuwaiti Management Contracting G.H.Q. BDF - Medical Royal Services AAG Engineers & Architects LV Power Cables 0.6/1 kV & 0.45/0.75 Kv 25.0 2014 - 2016
Nicolas E Aristodemou M & EEC
Chapo / BEMCO Amwaj Waves, Phase I @Amwaj Island LV Power Cables 0.6/1 kV & 0.45/0.75 Kv 44.0 2014 - 2016
Ltd.
AAA Homes 27 Storey Ibis Seef Hotel @Sanabis Farry Kazerooni Architects LV Power Cables 0.6/1 kV & 0.45/0.75 Kv 13.0 2014 - 2016
Fundament SPC Lagoona Beach Resort & Spa Gulf House Engineering LV Power Cables 0.6/1 kV & 0.45/0.75 Kv 21.0 2014 - 2016
Dundee Construction 2 storey Villa @Arad Daylami Consultant Engineering LV Power Cables 0.6/1 kV & 0.45/0.75 Kv 18.0 2014 - 2016
Saraya Contractors Construction of X-ray & Dental Clinic @Zallaq Ministry of Health LV Power Cables 0.6/1 kV & 0.45/0.75 Kv 8.0 2014 - 2016
Six Construct / Mercury Middle East Four Seasons Hotel, Bahrain Bay COWI LV Power Cables 0.6/1 kV & 0.45/0.75 Kv 33.0 2014 - 2016
BAHRAIN
Almoayyed Contracting KIA Showroom @Muharraq Middle East Architects LV Power Cables 0.6/1 kV & 0.45/0.75 Kv 5.0 2014 - 2016
Kontra WLL Sash Luxury Spa @Riffa MEEB LV Power Cables 0.6/1 kV & 0.45/0.75 Kv 17.0 2014 - 2016
Fundament SPC 23 nos. Town Houses (Type T-8) @Arad Ministry of Housing LV Power Cables 0.6/1 kV & 0.45/0.75 Kv 11.0 2014 - 2016
Fundament SPC Busaiteen Shop @Muharraq Salah Al Kooheji Consultancy LV Power Cables 0.6/1 kV & 0.45/0.75 Kv 3.0 2014 - 2016
Dundee Construction Private 2 Storey Villa @Saar Intech Bahrain LV Power Cables 0.6/1 kV & 0.45/0.75 Kv 5.0 2014 - 2016
Dundee Construction Restaurant @Adliya MEEB LV Power Cables 0.6/1 kV & 0.45/0.75 Kv 4.0 2014 - 2016
Abdul Hadi Alafoo 250 Villas - PPP Housing - Madinat Al Shamaliya Ansari Engineering Services LV Power Cables 0.6/1 kV & 0.45/0.75 Kv 14.0 2014 - 2016
Bahrain International Airport Development - Enabling Aeroports de Paris Ingenierie, 11 Kv , 0.6/1 kV &
G. P. Zachariades (Overseas) Ltd. LV & MV Power Cables 11.0 2014 - 2016
Works - Package 1B Dubai 0.45/0.75 Kv
Kooheji Contractors / Star Technical 20 Storey Ariva Tower @Amwaj HCP Architecture & Engineering LV Power Cables 0.6/1 kV & 0.45/0.75 Kv 7.0 2014 - 2016
Contratech SPC Busaiteen Youth Center MEEB LV Power Cables 0.6/1 kV & 0.45/0.75 Kv 2.0 2014 - 2016
Bahrain Motor Company 200 Villas - PPP Housing - Madinat Al Shamaliya Ansari Engineering Services LV Power Cables 0.6/1 kV & 0.45/0.75 Kv 14.0 2014 - 2016
Aradous Constr. & Maintenance SSFC @SAFRA Ministry of Interior LV Power Cables 0.6/1 kV & 0.45/0.75 Kv 2.0 2014 - 2016
EMCO WLL restaurant @Adliya Aref Sadiq Design Consultants LV Power Cables 0.6/1 kV & 0.45/0.75 Kv 18.0 2014 - 2016
G. P. Zachariades (Overseas) Ltd. Car Garage @Jiddah Island Design & Build (GPZ) LV Power Cables 0.6/1 kV & 0.45/0.75 Kv 6.0 2014 - 2016
AL IRAQ AL MOIASER
American Base _ LV Power Cables 0.6/1 kV 614.0 2010-2011
(supplier: ALAMCO)
DOHA CABLES Reference List
PROJECT/ YEAR
CLIENT PROJECT CONSULTANT MATERIAL SUPPLIED VOLTAGE RATING QUANTITY (km)
PROJECT OWNER OF SUPPLY
L & T ELECTROMECHANIC LLC OMAN Saih Nihaydah Depletion Compression Phase III _ LV Power Cables 0.6/1 kV 52.7 2016
SULTANATE OF OMAN
GULF MUSCAT UNITED LLC Bausher Office Building LINES & VISIONS Earthing Cables 0.45/0.75 kV 159.0 2016
UNITED EAST PROJECTS LLC Construction of Al Rawadha Building LINES & VISIONS Earthing Cables 0.45/0.75 kV 4.2 2016
MURIYA Salalah Beach Tourism _ LV Power Cables 0.6/1 kV 42.5 2015
AL KHALILI GROUP Power Project Salata _ LV Power Cables 0.6/1 kV 8.0 2010
TECHNICAL SUPPLIES INTERNATIONAL Various Domestic Projects in Oman _ LV Power Cables 0.6/1 kV 4.0 2010
AL MOAYYED INTERNATIONAL Substation Work at Sur /
_ LV Power Cables 0.6/1 kV 13.0 2010
(supplier: AL KHALILI GROUP) MAZOON ELECTRICITY CO.
EASTERN OVERSEAS Ghubra Substation Project /
_ LV Power Cables 0.6/1 kV 4.0 2010
(supplier: AL KHALILI GROUP) MUSCAT ELECTRICITY DISTRIBUTION CO.
LABEEB TRADING & CONTRACTING Substation Work at Sur /
_ LV Power Cables 0.6/1 kV 6.0 2010
(supplier: AL KHALILI GROUP) MAZOON ELECTRICITY CO.
NPE ENGINEERING & CONTRACTING Salalah Integrated Power & Water Projects/
_ LV Power Cables 0.6/1 kV 20.0 2010
(supplier: AL KHALILI GROUP) MINISTRY OF WATER & ELECTRICITY
Port Sudan New Strategic Depot Project LV Power Cables 0.6/1 kV 164.0
JACK & SANOUSSI ENGINEERING (Vertical & LPG) _ 2014
SUDAN
CANDO TRADING LIMITED MIX PROJECT IN HONGKONG _ Power Cables- PVC 0.6/1 kV 5.0 2019
Description Description
• Soft annealed solid or stranded Copper • Soft annealed Copper fine wires, bunched together
conductors insulated with LSHF compound rated in sub - units or stranded bunched groups into a main
90 °c according to BS 7211and BS EN 60332-1. units, which forms the flexible conductor.Insulated
with LHSF compund rated 90 °C.
Application • Cables are produced according to BS 7211 and
BS EN 60332-1
For indoor fixed installations in dry locations, laid
in conduits, as well as in steel support brackets.
Application
For indoor fixed installations in dry locations, where
particular flexibility is required. For electrical panels
Current rating in air
connection or for electrical apparatus they can be laid
Free Air Pipes
Nominal Max. Conductor in groups around steek sheets.
resistance Horizontal flat Vertical flat Enclosed in conduit on a wall
cross Terfoil
spaced spaced or in turnking etc.
Product - code sectional
area 2 cables, Single 2 cables, Single
3 cables, 2 cables,
phase a.c. or d.c. phase a.c. or d.c. 3 or 4 cables,
DC at AC at Free terfoil, Single phase
or 3 cables or 3 cables three phase
20 °C 90 °C three phases a.c. or d.c.
three phases three phases
Current rating in air
mm2 Ω/km Ω/km A Ω/km A A A A Free Air Pipes
Max. Conductor
COD-S001-U04 1.5 re 12.1000 15.4000 - - - 20 17 resistance Horizontal flat Vertical flat Enclosed in conduit on a wall
Nominal Terfoil
spaced spaced or in turnking etc.
COD-T001-U04 1.5 rm 12.1000 15.4000 - - - 20 17 cross
Product - code sectional 2 cables, Single 2 cables, Single
COD-S001-U06 2.5 re 7.4100 9.4500 - - - 27 23 3 cables, 2 cables,
area phase a.c. or d.c. phase a.c. or d.c. 3 or 4 cables,
DC at AC at Free terfoil, Single phase
COD-T001-U06 2.5 rm 7.4100 9.4500 - - - 27 23 or 3 cables or 3 cables three phases
20 °C 90 °C three phases a.c. or d.c.
three phases three phases
COD-S001-U08 4 re 4.6100 5.8800 - - - 36 31
COD-T001-U08 4 rm 4.6100 5.8800 - - - 36 31 mm2 Ω/km Ω/km A Ω/km A A A A
COD-T001-U12 25 rm 0.7270 0.9270 166 148 125 114 101 COD-F001-U10 10 1.9100 2.4360 - - - 64 57
COD-T001-U13 35 rm 0.5240 0.6690 205 184 155 141 125 COD-F001-U11 16 1.2100 1.5430 - - - 86 77
COD-T001-U14 50 rm 0.3870 0.4940 249 223 190 171 152 COD-F001-U12 25 0.7800 0.9550 166 148 125 114 101
COD-T001-U15 70 rm 0.2680 0.3430 319 289 245 218 194 COD-F001-U13 35 0.5540 0.7070 205 184 155 141 125
COD-T001-U16 95 rm 0.1930 0.2480 387 353 300 263 235 COD-F001-U14 50 0.3860 0.4930 249 223 190 171 152
COD-T001-U17 120 rm 0.1533 0.1970 450 412 350 305 272 COD-F001-U15 70 0.2720 0.3480 319 289 245 218 194
COD-T001-U18 150 rm 0.1240 0.1600 518 476 404 341 298 COD-F001-U16 95 0.2060 0.2640 387 353 300 263 235
COD-T001-U19 185 rm 0.0991 0.1290 592 546 465 387 336 COD-F001-U17 120 0.1610 0.2070 450 412 350 305 272
COD-T001-U20 240 rm 0.0754 0.0990 699 647 551 455 394 COD-F001-U18 150 0.1290 0.1670 518 476 404 341 298
COD-T001-U30 300 rm 0.0601 0.0810 805 749 637 520 448 COD-F001-U19 185 0.1060 0.1380 592 546 465 387 336
COD-T001-U40 400 rm 0.0470 0.0638 968 903 745 620 530 COD-F001-U20 240 0.0801 0.1050 699 647 551 455 394
The above data is approximate and subjected to manufacturing tolerance. re : Round, Solid
The above data is approximate and subjected to manufacturing tolerance.
rm : Round, Stranded
138 Low Smoke Halogene Free Low Smoke Halogene Free 139
ANNEXURE 13
PREVIOUS MATERIAL APPROVALS
approved -- as noted
02-05-2017