K TO 12 BASIC EDUCATION CURRICULUM

JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)

These are the specializations and their pre-requisites. These lists should be used as reference for curriculum maps.

AGRI-FISHERY ARTS
Specialization Number of Hours Pre-requisite
1. Agricultural Crops Production (NC I) 320 hours
2. Agricultural Crops Production (NC II)
updated based on TESDA Training Regulations published December 28, 2013 640 hours

3. Agricultural Crops Production (NC III) 640 hours Agricultural Crops Production (NC II)
4. Animal Production (Poultry-Chicken) (NC II) or
Animal Health Care Management (NC III) 320 hours Animal Production (Ruminants) (NC II) or
Animal Production (Swine) (NC II)
5. Animal Production (Poultry-Chicken) (NC II) 320 hours
updated based on TESDA Training Regulations published December 28, 2013

6. Animal Production (Large Ruminants) (NC II) 320 hours

updated based on TESDA Training Regulations published December 28, 2013

7. Animal Production (Swine) (NC II) 320 hours

updated based on TESDA Training Regulations published December 28, 2013

8. Aquaculture (NC II) 640 hours

9. Artificial Insemination (Large Ruminants) (NC II) 160 hours Animal Production (Large Ruminants) (NC II)
10. Artificial Insemination (Swine) (NC II) 160 hours Animal Production (Swine) (NC II)
11. Fish Capture (NC II) 640 hours
12. Fishing Gear Repair and Maintenance (NC III) 320 hours
13. Fish-Products Packaging (NC II) 320 hours
14. Fish Wharf Operation (NC I) 160 hours
15. Food Processing (NC II) 640 hours
16. Horticulture (NC III) 640 hours Agricultural Crops Production (NC II)
17. Landscape Installation and Maintenance (NC II) 320 hours
18. Organic Agriculture (NC II) 320 hours
19. Pest Management (NC II) 320 hours

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 1 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)
20. Rice Machinery Operations (NC II) 320 hours
21. Rubber Processing (NC II) 320 hours
22. Rubber Production (NC II) 320 hours
23. Slaughtering Operations (Hog/Swine/Pig) (NC II) 160 hours

HOME ECONOMICS

Number of
Specialization Pre-requisite
Hours
1. Attractions and Theme Parks Operations with Ecotourism (NC II) 160 hours
2. Barbering (NC II) 320 hours
3. Bartending (NC II) 320 hours
4. Beauty/Nail Care (NC II) 160 hours
5. Bread and Pastry Production (NC II) 160 hours
6. Caregiving (NC II) 640 hours
7. Commercial Cooking (NC III) 320 hours Cookery (NC II)
8. Cookery (NC II) 320 hours
9. Dressmaking (NC II) 320 hours
10. Events Management Services (NC III) 320 hours
11. Fashion Design (Apparel) (NC III) 640 hours Dressmaking (NC II) or Tailoring (NC II)
12. Food and Beverage Services (NC II) updated based on 160 hours
TESDA Training Regulations published December 28, 2013

13. Front Office Services (NC II) 160 hours

14. Hairdressing (NC II) 320 hours
15. Hairdressing (NC III) 640 hours Hairdressing (NC II)
16. Handicraft (Basketry, Macrame) (Non-NC) 160 hours
17. Handicraft (Fashion Accessories, Paper Craft) (Non-NC) 160 hours

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 2 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)
18. Handicraft (Needlecraft) (Non-NC) 160 hours
19. Handicraft (Woodcraft, Leathercraft) (Non-NC) 160 hours
20. Housekeeping (NC II) 160 hours
updated based on TESDA Training Regulations published December 28, 2013

21. Local Guiding Services (NC II) 160 hours

22. Tailoring (NC II) 320 hours
23. Tourism Promotion Services (NC II) 160 hours
24. Travel Services (NC II) 160 hours
25. Wellness Massage (NC II) 160 hours

INDUSTRIAL ARTS

Number of
Specialization Pre-requisite
Hours

1. Automotive Servicing (NC I) updated based on TESDA 640 hours

Training Regulations published December 28, 2013

2. Automotive Servicing (NC II) 640 hours Automotive Servicing (NC I)

3. Carpentry (NC II) 640 hours
4. Carpentry (NC III) 320 hours Carpentry (NC II)
5. Construction Painting (NC II) 160 hours
6. Domestic Refrigeration and Air-conditioning (DOMRAC) Servicing (NC
640 hours
II)
7. Driving (NC II) 160 hours
8. Electrical Installation and Maintenance (NC II) 640 hours
9. Electric Power Distribution Line Construction (NC II) 320 hours Electrical Installation and Maintenance (NC II)

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 3 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)
10. Electronic Products Assembly and Servicing (NC II) 640 hours
updated based on TESDA Training Regulations published December 28, 2013

11. Furniture Making (Finishing) (NC II) 640 hours

12. Instrumentation and Control Servicing (NC II) 320 hours Electronic Products Assembly and Servicing (EPAS) (NC II)
13. Gas Metal Arc Welding (GMAW) (NC II) 320 hours Shielded Metal Arc Welding (SMAW) (NC II)
14. Gas Tungsten Arc Welding (GTAW) (NC II) 320 hours Shielded Metal Arc Welding (GMAW) (NC II)
15. Machining (NC I) 640 hours
16. Machining (NC II) 640 hours Machining (NC I)
17. Masonry (NC II) 320 hours
18. Mechatronics Servicing (NC II) 320 hours Electronic Products Assembly and Servicing (EPAS) (NC II)
19. Motorcycle/Small Engine Servicing (NC II) 320 hours
20. Plumbing (NC I) 320 hours
21. Plumbing (NC II) 320 hours Plumbing (NC I)
22. Refrigeration and Air-Conditioning (Packaged Air-Conditioning Unit Domestic Refrigeration and Air-conditioning (DOMRAC)
640 hours
[PACU]/Commercial Refrigeration Equipment [CRE]) Servicing (NC III) Servicing (NC II)
23. Shielded Metal Arc Welding (NC I) 320 hours
24. Shielded Metal Arc Welding (NC II) 320 hours Shielded Metal Arc Welding (NC I)
25. Tile Setting (NC II) 320 hours
26. Transmission Line Installation and Maintenance (NC II) 640 hours Electrical Installation and Maintenance (NC II)

INFORMATION, COMMUNICATIONS AND TECHNOLOGY (ICT)

Number of
Specialization Pre-requisite
Hours
1. Animation (NC II) 320 hours
2. Broadband Installation (Fixed Wireless Systems) (NC II) 160 hours Computer Systems Servicing (NC II)
3. Computer Programming (.Net Technology) (NC III) 320 hours

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 4 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)
updated
based on TESDA Training Regulations published December 28, 2013

4. Computer Programming (Java) (NC III) 320 hours

updated
based on TESDA Training Regulations published December 28, 2013

5. Computer Programming (Oracle Database) (NC III) 320 hours

updated
based on TESDA Training Regulations published December 28, 2013

6. Computer Systems Servicing (NC II) updated 640 hours

based on TESDA Training Regulations published December 28, 2007

7. Contact Center Services (NC II) 320 hours

8. Illustration (NC II) 320 hours
9. Medical Transcription (NC II) 320 hours
10. Technical Drafting (NC II) 320 hours
11. Telecom OSP and Subscriber Line Installation (Copper
320 hours Computer Systems Servicing (NC II)
Cable/POTS and DSL) (NC II)
12. Telecom OSP Installation (Fiber Optic Cable) (NC II) 160 hours Computer Systems Servicing (NC II)

Course Description

This is an introductory course that leads to a Computer Systems Servicing National Certificate Level II (NC II). It covers seven (7) common competencies that a
student ought to possess: 1) application of quality standards, 2) computer operations; 3) performing mensuration and calculation; 4) preparation and interpretation of technical
drawing; 5) the use of hand tools; 6) terminating and connecting electrical wiring and electronics circuits; and 7) testing electronics components; and four (4) core competencies,

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 5 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)
namely, 1) installing and configuring computer systems, 2.) setting up computer networks, 3) setting up computer servers, and 4) maintaining and repairing computer systems
and networks.

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES

Introduction The learners demonstrate The learners shall be able to The learners…
1. Basic concepts in computer an understanding of the demonstrate common 1. Explain basic concepts in computer systems
systems servicing basic concepts and competencies in computer servicing
2. Relevance of the course underlying theories in systems servicing as prescribed 2. Discuss the relevance of the course
3. Career opportunities computer systems by TESDA Training Regulations 3. Explore career opportunities in computer systems
servicing servicing

PERSONAL ENTREPRENEURIAL COMPETENCIES (PECs)

1. Assessment of Personal The learners demonstrate The learners shall be able to LO 1. Recognize Personal Entrepreneurial TLE_PECS7-1200-
Competencies and Skills an understanding of one’s prepare an activity plan that Competencies and Skills (PECs) needed in 1
(PECs) vis-à-vis PECs of a PECs in computer systems aligns with the PECS of a computer systems servicing
practicing entrepreneur/ servicing practitioner/entrepreneur in 1.1 Compare one’s PECs with those of a practitioner/
employee computer systems servicing entrepreneur
1.1 Characteristics 1.2 Align one’s PECs with those of a practitioner/
1.2 Attributes entrepreneur
1.3 Lifestyle 1.3 Assess one’s PECs
1.4 Skills 1.4 Assess practitioner’s PECs
1.5 Traits
2. Analysis of PECs compared
to those of a practitioner
3. Align one’s PECs based on
the results of the
assessment

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 6 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES

1. Strengthening and The learners demonstrate The learners shall be able to LO 2. Develop and strengthen personal TLE_PECS7-
developing further one’s an understanding of one’s create a plan of action that competencies and skills (PECs) needed in 1200-2
PECs PECs in computer systems strengthens/develops one’s PECs computer systems servicing
servicing in computer systems servicing 2.1 Identify areas for improvement, development and
growth
2.2 Align one’s PECs according to his/her
business/career choice
2.3 Create a plan of action that ensures success of
his/her business/career choice

ENVIRONMENT AND MARKET (EM)

Market (Town) The learners demonstrate The learners shall be able to LO 1. Recognize and understand the market in TLE_EM7-12-00-
1. Key concepts of market an understanding of the create a business vicinity map computer systems servicing 1
2. Players in the market concepts of environment reflective of the potential 1.1 Identify the players/ competitors within the town
(competitors) and market and how they computer systems servicing 1.2 Identify the different products/services
relate to the field of market in the locality/town available in the market
1. Products & services
computer systems
available in the market
servicing, particularly in
one’s town/ municipality

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 7 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)

Market (customer) LO 2. Recognize the potential customer/ TLE_EM7-12-00-

1. Key concepts in identifying market in computer systems servicing 2
and understanding the 2.1 Profile potential customers
consumer 2.2 Identify the customer’s needs and wants through
2. Consumer analysis through: consumer analysis
2.1 Observation 2.1 Conduct consumer/market analysis
2.2 Interviews
2.3 Focus group
discussion (FGD)
2.4 Survey

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES

1. Generating business ideas LO 3. Create new business ideas in computer TLE_EM7-12-00-

1.1 Key concepts in systems servicing by using various techniques 3
generating business 3.1 Explore ways of generating business ideas from
ideas ones’ own characteristics/attributes
1.2 Knowledge, skills, 3.2 Generate business ideas using product
passions, and interests innovation from irritants, trends, and emerging
1.3 New applications needs
1.4 Irritants 3.3 Generate business ideas using Serendipity Walk
1.5 Striking ideas (new
concepts)
1.6 Serendipity Walk

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 8 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)

1. Product development The learners demonstrate The learners shall be able to LO 4. Develop a product/service in computer TLE_EM7-12-00-
2. Key concepts in developing an understanding of create a business vicinity map systems servicing 4
a product concepts of environment reflective of the potential 4.1 Identify what is of “value” to the customer
3. Finding Value and market and how they computer systems servicing 4.2 Identify the customer
4. Innovation relate to computer market within the locality/town 4.3 Explain what makes a product unique and
4.1 Unique Selling systems servicing, competitive
Proposition (USP) particularly in one’s 4.4 Apply creativity and innovative techniques to
town/municipality develop marketable product
4.5 Employ a USP to the product/service

1. Selecting business idea LO 5. Select a business idea based on the TLE_EM7-12-00-

2. Key concepts in selecting a criteria and techniques set 5
business idea 5.1 Enumerate various criteria and steps in selecting
2.1 Criteria Techniques a business idea
5.2 Apply the criteria/steps in selecting a viable
business idea
5.3 Determine a business idea based on the
criteria/techniques set

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES

1. Branding LO 6. Develop a brand for the product TLE_EM7-12-00-

6.1 Identify the benefits of having a good brand 6
6.2 Enumerate recognizable brands in the
town/province
6.3 Enumerate criteria for developing a brand
6.4 Generate a clear appeal
COMMON COMPETENCIES
LESSON 1: APPLYING QUALITY STANDARDS (AQS)

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 9 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)

• Work order and standard The learners demonstrate The learners shall be able to LO 1. Assess quality of received materials TLE_IACSS912AQS-
operating procedures an understanding of apply quality standards in 1.1 Obtain work instruction in accordance with Ia-1
• Specification of materials concepts and underlying computer systems servicing standard operating procedures
and components principles in applying 1.2 Check the received materials against workplace
- Wires quality standard in standards and specifications
- Cables computer systems 1.3 Identify and isolate faulty materials related to
- Electrical tape servicing work
Components 1.4 Record and/ or report defects and any identified
- Resistors causes to the supervisor concerned in
- Capacitors accordance with workplace procedures
- Integrated circuits 1.5 Replace faulty materials in accordance with
- Diodes workplace procedures
- Transistor
• Faults
- Factory defects
- Nonconformity to
specifications
- Nonconformity to
government standards
and PECs,
environmental code
- Safety defects
• Recording and reporting
procedures
- Parts identification
- Component
identification

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 10 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)

• Related documents LO 2. Assess own work TLE_IACSS912AQS-

- Service manuals 2.1 Identify and use documentation relative to Ib-2
- Operations manual quality within the prescribe standard
- Certifications 2.2 Check completed work against workplace
- Type approval standards relevant to the task undertaken
certificates 2.3 Identify and isolate errors
• Quality standards on 2.4 Record information on the quality and other
- Materials indicators of production performance in
- Component parts accordance with workplace procedures
- Final product 2.5 Document and report cases of deviations from
- Product production specific quality standards in accordance with the
workplace’s procedures
• Checking process
- Quality controlling
- Quality assurance
• Records and documents
- Organization work
procedures
- Manufacturers
instruction manual
- Forms

• Process improvement LO 3. Engage in quality improvement TLE_IACSS9-12

procedure 3.1 Participate process improvement procedures in AQS-Ic-3
• Monitoring performance relative to workplace assignment
operation 3.2 Carry out work in accordance with process
- Customer satisfaction improvement procedures
- Customer feedback 3.3 Monitor performance of operation or quality of
form product of service to ensure customer
- Co-workers feedback satisfaction
- Supervisors rating sheet
- Suppliers feedback
• Checking quality output
procedures

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 11 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 12 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES

LESSON 2: PERFORMING COMPUTER OPERATIONS (PCO)

• Task identification The learners demonstrate The learners shall be able to LO 1. Plan and prepare for task to be TLE_IACSS912PCO-
- Planning and understanding of perform computer operations undertaken Ic-d-4
- Preparing concepts and underlying based on a given tasks 1.1 Determine requirements of task in accordance
• Operational health and principles in performing with the required output
safety (OHS) guidelines computer operations 1.2 Select appropriate hardware and software
and procedures according to task assigned and required
• Computer hardware outcome
- Keyboard 1.3 Plan a task to ensure that OHS guidelines and
- Mouse procedures are followed
- Hard drives 1.4 Follow client-specific guidelines and procedures
- Monitor 1.5 Apply required data security guidelines in
- System Unit accordance with existing procedures
• Computer application
software
• Types of program/ LO 2. Input data into computer TLE_IACSS912PCO–
application software - word 2.1 Enter the data into the computer using Id-e-5
processing appropriate program/application in accordance
- web browsers with company procedures
- internet 2.2 Check the accuracy of information and save the
• Data processing information in accordance with standard
• Checking and saving operating procedures
information 2.3 Store inputted data is in storage media
• Storage devices according to requirements
- primary 2.4 Perform work within ergonomic guidelines
- secondary
• Work Ergonomic

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 13 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)
• Desktop icons LO 3. Access information using computer TLE_IACSS912PCO-
- Directories 3.1 Select correct program/application based on Ie-f-6
- Files and folders job requirements
- Recycle bin 3.2 Access program/application containing the
• Keyboard techniques information required according to company
- Proper handling procedures
- Shortcut keys 3.3 Select, open, and close desktop for navigation
• Keyboard care and purposes
maintenance 3.4 Carry out keyboard techniques in line with OHS
requirements

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES

• Computer application LO 4. Produce output/ data using computer TLE_IACSS912PCO-

software system If-7
• Computer peripherals 4.1 Process entered data using appropriate
- Printer software commands
• Storage devices 4.2 Print out data as required using computer
hardware /peripheral devices in accordance
with standard operating procedures
4.3 Transfer files and data between compatible
systems using computer software,
hardware/peripheral devices in accordance with
standard operating procedures

Requirements for Internet LO 5. Use basic functions of a www- browser TLE_IACSS912PCO-

search - browsers to locate information Ig-h-8
- URL 5.1 Establish information requirements for internet
- search engine search
- bookmark 5.2 Launch browser
- link 5.3 Load search engine
5.4 Enter appropriate search criteria/or URL of site
5.5 Follow relevant links to locate required
information
5.6 Bookmark useful pages and print as required

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 14 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)

• Computer maintenance LO 6. Maintain computer equipment and TLE_IACSS912PCO-

- Disk cleanup systems Ii-j-9
- Checking disk errors 6.1 Implement procedures for ensuring security of
- Replacement of data, including regular backups and virus
consumables checks in accordance with standard operating
- Dusting the external procedures
and internal part of the 6.2 Implement basic file maintenance procedures in
computer line with the standards operating procedures
• File maintenance
- Backing up files
- Deleting unwanted files
- Updating antivirus
database/using more
appropriate anti virus
program

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES

LESSON 3: PERFORMING MENSURATION AND CALCULATION (PMC)

• Types of components and The learners demonstrate The learners shall be able to LO 1. Select measuring instruments TLE_IACSS912PMC-
objects to be measured: an understanding of accurately measure and 1.1 Identify object/s or component to be measured IIa-b-10
- Memory concepts and underlying calculate based on a given tasks 1.2 Obtain correct specifications from relevant
- Data storage capacity principles in performing source
- Processor measurements and 1.3 Select measuring tools in line with job
- Video card calculations requirements
• Correct specifications from
relevant sources
• Measuring tools

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 15 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)

• Types of measuring LO 2. Carry out measurements and calculation TLE_IACSS912PMC-

instruments and their uses 2.1 Select appropriate measuring instrument to IIb-d-11
• Safe handling procedures achieve required outcome
in using measuring 2.2 Obtain accurate measurements for job
instruments 2.3 Perform calculation needed to complete task
• Four fundamental using the four mathematical fundamental
operation of mathematics operations addition (+), subtraction (-),
• Formula for volume, area, multiplication (x), and division (÷)
perimeter, and other 2.4 Use calculation involving fractions, percentages
geometric figures and mixed numbers to complete workplace tasks
• Conversion and calculation 2.5 Self-check and correct numerical computation for
- Capacity and speed accuracy
- Memory 2.6 Read instruments to the limit of accuracy of the
- Data storage tool
- Processor
- Video card
• bit/byte/MB/GB/TB

• Maintenance of measuring LO 3. Maintain measuring instruments TLE_IACSS9-

instruments 3.1 Ensure proper handling of measuring 12PMC-IIe-f-12
- 5S instruments to avoid damage and clean it before
- Lubrication and after using
- Cleaning 3.2 Identify tasks to be undertaken for proper
- Storage storage of instruments according to
• Proper storage of manufacturer’s specifications and standard
instruments operating procedures

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES

LESSON 4: PREPARING AND INTERPRETING TECHNICAL DRAWING (PITD)

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 16 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)

• Basic symbols The learners demonstrate The learners shall be able to LO 1. Identify different kinds of technical TLE_IACSS9-
• Basic elements and understanding of prepare and interpret technical drawings 12PITD-IIf-g-13
- Schematic diagram concepts and underlying drawings and work plans 1.1 Select correct technical drawing in accordance
- Charts principles in preparing accurately with the job requirement
and interpreting technical 1.2 Segregate technical drawings in accordance with
- Block diagrams
drawings and work plans the types and kinds of drawings
- Layout plans
for computer systems
- Loop diagram servicing

• Technical drawing LO 2. Interpret technical drawing TLE_IACSS9-

- Components, 2.1 Recognize components, assemblies, or objects as 12PITD-IIg-h-14
assemblies, or objects required
- Dimensions 2.2 Identify dimensions of the key features of the
- Symbols objects depicted in the drawing
• Job requirements or 2.3 Identify and interpret symbols used in the
equipment for drawing in drawing
accordance with standard 2.4 Check and validate drawing against job
operating procedures requirements or equipment in accordance with
standard operating procedures

• Electrical/ Electronic LO 3. Prepare/ make changes to electrical/ TLE_IACSS9-

Schematic electronic schematics and drawings 12PITD-IIh-i-15
• Schematic drawings 3.1 Draw and identify correctly electrical/ electronic
schematic
3.2 Identify correct drawing; select and use
equipment in accordance with job requirements

• Care and maintenance of LO 4. Store technical drawings and TLE_IACSS9-

technical drawing equipment/ instruments 12PITD-IIj-16
equipment/ instruments 4.1 Identify tasks to be undertaken for care and
• Inventory of technical maintenance of drawings according to company
drawings procedures
• Proper storage of
instruments

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 17 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES

4.2 Record technical drawings and prepare an

inventory in accordance with company
procedures
4.3 4.3 identify tasks to be undertaken for proper
storage of instruments according to company
procedures
LESSON 5: USING HAND TOOLS (UHT)

• Identifying and selecting The learners demonstrate The learners shall be able to use LO 1. Plan and prepare for tasks to be TLE_IACSS912UHT-
different types and uses of an understanding of the hand tools and equipment for undertaken IIIa-17
hand tools use of hand tools and computer systems servicing 1.1 Identify tasks to be undertaken properly
• Uses of different hand equipment for computer 1.2 Identify and select appropriate hand tools
tools. systems servicing according to the task requirements

• Checking of hand tools LO 2. Prepare hand tools TLE_IACSS9-

• Identifying unsafe or faulty 2.1 Check appropriate hand tools for proper 12UHT-IIIb-18
tools operation and safety
2.2 Identify and mark unsafe or faulty tools for
repair according to standard company procedure

• Operating hand tools LO 3. Use appropriate hand tools and test TLE_IACSS912UHT-
• Safety procedures using equipment IIIc-19
handling tools 3.1 Use tools according to tasks undertaken.
• Personal Protective 3.2 Observe all safety procedures in using tools at all
Equipment (PPE) times and use appropriate PPE
• Documentation process 3.3 Report malfunctions, unplanned or unusual
events to the supervisor

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 18 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)

• Maintenance of hand tools LO 4. Maintain hand tools TLE_IACSS912UHT-

- Cleaning 4.1 Do not drop tools to avoid damage; carry out IIId-20
- Lubricating routine maintenance of tools according to
- Tightening standard operational procedures, principles, and
- Tools repairs techniques
- Adjusting using correct 4.2 Store tools safely in appropriate locations in
procedures accordance with manufacturer’s specifications or
- Sharpening standard operating procedures
• Storing of hand tools

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES

LESSON 6: TERMINATING AND CONNECTING ELECTRICAL WIRING AND ELECTRONICS CIRCUIT (TCEW)
• Material specification The learners demonstrate The learner shall be able to LO 1. Plan and prepare for termination/ TLE_IACSS912TCEW-
- Assorted wires and an understanding of demonstrate proper termination connection of electrical wiring/ electronics IIIe-f21
cables concepts and underlying and connection of electrical circuits
• Task requirements principles in terminating wiring and electronics circuits 1.1 Check materials according to specifications and
- Splicing and connecting electrical tasks
- Jointing wiring and electronics 1.2 Select appropriate tools and equipment
- Soldering circuits according to task requirements
• Tools and equipment 1.3 Follow planned task to ensure OHS guidelines
- Pliers and procedure
- Cutters 1.4 Prepare electrical wiring/electronics circuits
- Screw driver correctly for connecting/terminating in
accordance with instruction and work site
- Soldering gun
procedures
- Multitester
• OH&S guidelines and
procedures
• Electrical wiring diagram
• Electronics kit

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 19 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)

• OHS procedures LO 2: Terminate/connect electrical wiring/ TLE_IACSS912TCEW-

- Safety procedure in electronic circuits IIIg-i22
using tools 2.1 Observe safety procedures in using tools and
- Appropriate PPE use appropriate personal protective equipment
• Methods in termination and at all times
connections according to 2.2 Identify the tasks to be undertaken to work
job specification safely in accordance with the workplace and
- Clamping standard procedures
- Pin connection 2.3 Use appropriate range of methods in
- Soldered joints termination/connection in accordance to
specifications, manufacturer’s requirements, and
- Plugs
safety
• Proper procedures in
2.4 Follow correct sequence of operation
adjusting accessories
2.5 Adjust used accessories
- Brackets
2.6 Confirm termination/connection in accordance
- Clamps
with job specification
• Confirmation of
termination/ connection in
accordance with the job
specification

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES

• Proper procedure in LO 3: Test termination/connections of TLE_IACSS912TCEW-

conducting testing of electrical wiring/electronics circuits IIIi-j-
termination/connection of 3.1 Conduct complete testing of 23
electrical wiring/electronics termination/connection of electrical
circuits wiring/electronics circuits in compliance with
• Proper procedure in specifications and regulations using appropriate
checking wirings and procedures and equipment
circuits using specified 3.2 Check wirings and circuits using specified testing
testing procedures procedures
• Protocol in responding to 3.3 Respond to unplanned events or conditions in
unplanned conditions accordance with established procedures
LESSON 7: TESTING ELECTRONIC COMPONENTS (TEC)

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 20 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)
• Work instructions The learners demonstrate The learners shall be able to LO 1: Determine criteria for testing TLE_IACSS9-
• Job order an understanding of test electronic components electronics components 12TEC-IVa-c-24
• Work coordination process concepts and underlying 1.1 Obtain and clarify work instructions based on
• Documentations and principles in testing job order or client requirements
interpretations of electronic components 1.2 Consult responsible person for effective and
data/testing criteria proper work coordination
• Testing criteria 1.3 Obtain and interpret data sheets/application
- Controls notes based on manufacturer’s specifications
- Effectiveness 1.4 Define testing criteria to ensure that
- Efficiency components meet technical and quality
- Bug detection requirements
- Functionality, including 1.5 Document and communicate testing criteria to
flow relevant personnel
- Interoperability
- Performance
- Reliability
- Operating parameters
• Testing methods for LO 2: Plan an approach for components TLE_IACSS9-
electronic components testing 12TEC-IVc-e-25
- Automated 2.1 Identify various testing methods based on types
- Debugging of electronic components
- Inspection 2.2 Determine characteristics and appropriateness
- Platform testing of testing methods to be used during
- Prototyping development and on completion
• Testing strategies for 2.3 Consider/select testing methods in relation to
electronic components appropriate testing strategy

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 21 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)
- Passive testing 2.4 Develop plan for testing components at specified
- Dynamic testing points during development and on completion
- In-circuit testing 2.5 Prepare and check required test and measuring
• Procedure in checking and instruments and tools in accordance with
testing operation in established procedures
accordance with established 2.6 Establish records system to document testing
procedures results, including problems and faults
• Records systems
- metadata that includes:
o description of fault o
identification of code o
user responses
o written or verbal
comments
o quantitative data o
remedial action taken
o retest result
o date
o tester's details
- questionnaire
- survey
-

• Component testing process LO 3: Test components TLE_IACSS9-

evaluation 3.1 Apply appropriate testing methods to electronic 12TECO-IVf-h-26
• Component problems and components in accordance to technical
faults specifications
• Documentation procedures 3.2 Detect and record problems and faults by testing
• Procedures in resolving 3.3 Document remedial steps
detected problems faults 3.4 Resolve detected problems and faults during
testing in accordance with agreed project or
industry practice
3.5 Evaluate final products against the determined
criteria

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 22 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)
3.6 Submit to relevant personnel the documented and
summarized evaluation report of the testing
process

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES

• Components of testing LO 4: Evaluate the testing process TLE_IACSS912TECO-

methods 4.1 Identify testing methods that were successful IVh-j-27
• Testing process and based on industry standards
records 4.2 Evaluate testing process and records system
• Documentation procedures based on standard procedures
4.3 Document test results/findings for subsequent
testing
CORE COMPETENCIES
LESSON 8: INSTALLING AND CONFIGURING COMPUTER SYSTEMS (ICCS)

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 23 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)

• Types and parts of The learners demonstrate The learners shall be able to LO 1. Assemble computer hardware TLE_IACSS9-
computers an understanding of install and configure computer 1.1 Plan unit assembly to ensure OHS policies and 12ICCS-Ia-e-28
• Computer operating concepts and principles in systems based on established procedures are followed in accordance with
systems installing configuring procedures and system systems requirements
• Windows / MAC OS X computer systems requirements 1.2 Prepare unit assembly to ensure OHS policies
/Linux and procedures are followed in accordance with
• Peripheral devices systems requirements
• Computer systems design 1.3 Identify materials necessary to complete the
• Computer assembly work in accordance with established procedures
procedures and check against system requirements
• Power ON self-test and 1.4 Obtain materials necessary to complete the work
basic-input-output-system in accordance with established procedures and
(BIOS) configuration check against system requirements
procedures 1.5 Obtain tools, equipment and testing devices
• CMOS needed to carry out installation work in
accordance with established procedures and
• Motherboards
check for correct operation and safety
• Multimedia storage devices:
1.6 Assemble computer hardware in accordance with
- Video cards
established procedures and system requirements
- Sound cards
1.7 Perform BIOS configuration in accordance with
- Graphical user interface
hardware requirements

• Installers preparation and LO 2. Prepare installer TLE_IACSS912ICCS-

OS installation procedures 2.1 Create portable bootable devices in accordance If-j-29
• Application and with software manufacturer instruction
devices/drivers installation
procedures

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 24 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)
• Desktop PC interface/ hook 2.2 Prepare customized installers in accordance with
up procedures software utilization guide and end user
• Application packages and agreement
use of application programs 2.3 Carry out installation of portable applications in
• Bootable devices accordance with software user guide and
- -CD/DVD bootable software license
- -USB bootable using
Rufus software
- -USB bootable using
diskpart/CMD
• Software installers

• Installation of Operating LO 3. Install operating system and drivers for TLE_IACSS9-

System peripherals/ devices 12ICCS-IIa-j-30
- Windows Server 3.1 Install Operating System (OS) in accordance
2008/higher version with established installation procedures and to
- Windows XP/7/8/10 comply with end-user requirements
• Install and configure of 3.2 Install peripherals/ devices in accordance with
peripherals devices manufacturer’s instructions and/ or OS
• Install /Update Operating installation procedures
system 3.3 Configure peripherals/ devices in accordance
with manufacturer’s instructions and/ or OS
• Checking of work
installation procedures
3.4 Access OS and drivers updates/ patches in
accordance with manufacturer’s
recommendations and requirements
3.5 Install OS and drivers updates/ patches in
accordance with manufacturer’s
recommendations and requirements
3.6 Check the quality of the work undertaken in
accordance with established procedures

• Installation of applications LO 4. Install application software TLE_IACSS912ICCS-

software with different 4.1 Install Application Software based on software IIIa-e31
variations installation guides, end-user requirements and
• Software updates software license agreement
• Virtualization software

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 25 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES

• Disk management software 4.2 Carry out variation to application software in

• Antivirus / diagnostic accordance to customer/ client requirements
software 4.3 Access software updates in accordance with
• Device drivers manufacturer’s recommendations and
• Drivers/Software update requirements
procedures 4.4 Install software updates in accordance with
- Application software manufacturer’s recommendations and
license agreements requirements
- Stress-testing
procedures
- 5S and 3Rs
environmental policies

• Burning or testing installed LO 5. Conduct testing and documentation TLE_IACSS9-

equipment/devices 5.1 Test devices/ systems and/or installation to 12ICCS-IIIf-j-32
• Stress test determine whether it conforms to requirements
- Processor 5.2 Conduct stress test to ensure reliability of
- Memory equipment in accordance with manufacturer’s
- Hard Disk instructions and system requirements
- Video Card 5.3 Follow 5S and 3Rs according to environmental
• 5S and 3Rs environmental policies
policies 5.4 Follow procedures in forwarding documentation
• Reporting and to appropriate personnel and/or authority on
documentation procedures the test conducted.
LESSON 9. SETTING-UP COMPUTER NETWORKS (SUCN)

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 26 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)

• Computer network The learners demonstrate The learners shall be able to set LO 1 Install network cables TLE_IACSS912SUCN-
concepts an understanding of up computer networks based 1.1 Plan cable routes in accordance with network IVa-j-33
• Network cable installation concepts and principles in established procedures and design and actual installation site
• Copper cable splicing and setting up computer system requirements for 1.2 Determine cable routes in accordance with
cable testing networks hardware network design and actual installation site
• Fiber optic cables splicing 1.3 Identify necessary network materials in
and installation accordance with established procedures and
requirements check against system requirements
• Philippine Electrical Code 1.4 Obtain necessary network materials in
relevant to data connection accordance with established procedures and
• OHS standards and 5S check against system requirements
principles

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES

• Practicing 3Rs (reduce, 1.5 Obtain tools, equipment, and testing devices in
reuse, recycle/recover) accordance with established procedures
• 3Rs environmental policies 1.6 Check tools, equipment and testing devices in
• Managing waste from accordance with established procedures
electrical and electronic 1.7 Follow OHS policies
equipment (WEEE) 1.8 Use appropriate PPE
1.9 Perform copper cable splicing based on
Electronic
Industries Alliance / Telecommunications
Industry Association (EIA/TIA) standards
1.10 Install network cables and cable raceways in
accordance with established procedures and
installation requirements
1.11 Perform installation work and check for
unnecessary damage that has occurred and
complies with requirements
1.12 Follow OHS standards and 5S principles
according to enterprise requirements
1.13 Dispose excess components and materials
based on WEEE directives and 3Rs waste
management program

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 27 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)

• network design LO 2: Set network configuration TLE_IACSS912SUCN-

• addressing 2.1 Check network connectivity of each terminal in Ia-e-34
• subnetting accordance with network design
• topology 2.2 Diagnose and repair any problem or fault in the
• router/Wi-fi/ wireless network system in line with standard operating
access point/repeater procedures
configuration 2.3 Configure Network Interface Card (NIC) in
• Network Interface Card accordance with the network design
(NIC) settings 2.4 Carry out communication check between
• network cables terminals in accordance with operating systems
• cable raceways/ducts network configuration guides
• Network connectivity 2.5 Respond to unplanned events or conditions in
checking procedures and accordance with established procedures
techniques - Ping
- Netstat
- IP config

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES

• IPV4 and IPV6

• IP addressing
- Class A - Class B - Class
C
- Class D
- Class E
• Subnetting/Subnet Mask
• Contingency procedures in
response to unplanned
events and conditions
• Remote desktop

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 28 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)

• Wireless settings LO 3: Set router/Wi-fi/wireless access TLE_IACSS912SUCN-

configuration point/repeater configuration If-j-IIae-35
• Gateways 3.1 Configure client device systems settings in
• Security/firewall/advanced accordance with manufacturer’s instructions and
settings configuration end user preference
• Cloud computing 3.2 Configure LAN in accordance with manufacturer’s
• Network connectivity testing instructions and network design
• Device systems settings 3.3 Configure WAN in accordance with
configuration manufacturer’s instructions and network design
• Local area network (LAN) 3.4 Configure wireless settings in accordance with
port configuration manufacturer’s instructions, network design, and
• Wide area network (WAN) end-user preferences
port configuration 3.5 Configure security/firewall/advanced settings in
• Configuration procedure for accordance with manufacturers instruction and
end-user preferences
• Routers – managed and
unmanaged
• Access points
• Switch – managed and
unmanaged
• Repeaters
• Network Interface Cards
types and configuration
settings

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES

• Wireless network Interface

card
• Wired Network Interface
Card
• Firewall configuration

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 29 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)

• Network inspection LO 4: Inspect and test the configured TLE_IACSS9-

procedures computer networks 12SUCN-IIf-j-36
• Safe computer network 4.1 Undertake final inspection of the configuration
operation to conform to the manufacturer’s
• Documentation procedures instructions/manual
4.2 Ensure the configuration conforms to the
manufacturer’s instructions/manual
4.3 Check computer networks to ensure safe
operation
4.4 Prepare reports according to company
requirements
4.5 Complete reports according to company
requirements
LESSON 10: SETTING UP COMPUTER SERVERS (SUCS)

• Network operating systems The learners demonstrate The learners shall be able to set LO 1: Set up user access TLE_IACSS912SUCS-
(NOS) features an understanding of up computer servers based on 1.1 Create user folder in accordance with Network IIIa-e37
• User access level concepts and principles in acceptable standards and operating system features
configurations setting up computer hardware 1.2 Configure user access level based on NOS
• Network policies and servers features
services 1.3 Establish network access policies/end user
• Set up peer-to-peer (P2P) requirements
network access 1.4 Perform security check in accordance with
established network access policies/end user
requirements

• Configure server function LO 2: Configure network services TLE_IACSS912SUCS-

• Server modules and 2.1 Check normal server function in accordance IIIf-jIVa-j-38
addons with manufacturer’s instructions
• Network services and its 2.2 Install and update required modules/add-ons on
operation NOS installation procedures

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 30 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)
2.3 Confirm network services based on user/system
• Procedures in respond to requirements
unplanned events and 2.4 Check operation of network services based on
condition user/system requirements
• Domain Name Server 2.5 Respond to unplanned events or conditions in
(DNS) accordance with established procedures
• Domain controller (active
directory)
• File server
• Dynamic Host
Configuration Protocol
(DHCP) server
• Printer server
• Web
applications/technologies
• Setting up client/user
access and security
• Setting up and configuring
servers
• Installing and configuring
modules/add-ons
• Configuration of network
services

• Testing procedures LO 3: Perform testing, documentation, and TLE_IACSS9-

• Predeployment procedures predeployment procedures 12SUCS-Ia-j-39
and practices 3.1 Undertake predeployment procedures based on
• Enterprise policies and enterprise policies and procedures
procedures 3.2 Undertake operation and security check based on
• End-user requirements end-user requirements
• Enterprise policies and 3.3 Prepare reports according to enterprise policies
procedures and procedures
• Documentation and making 3.4 Complete reports according to enterprise policies
reports and procedures

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 31 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES

LESSON 11: MAINTAINING AND REPAIRING COMPUTER SYSTEMS AND NETWORKS (MRCN)

• Procedures in planning and The learners demonstrate The learners shall be able to LO 1. Plan and prepare for maintenance and TLE_IACSS912MRCN-
preparing maintenance an understanding of maintain and repair computer repair IIa-e40
and diagnoses of faulty concepts and principles in systems and networks based on 1.1 Plan maintenance and/ or diagnosis of faults in
computer and networks maintaining and repairing acceptable standards in line with job requirements
systems computer systems and computer’s software and 1.2 Prepare maintenance and/ or diagnosis of faults
• Tools and tests equipment networks hardware in line with job requirements
• PC specifications 1.3 Obtain tools, equipment, and testing devices
• OHS policies and needed for correct operation and safety
procedures 1.4 Check tools, equipment, and testing devices
• Maintenance of computer needed for correct operation and safety
systems and networks 1.5 Obtain materials necessary to complete the
• Planning and preparing for work in accordance with established procedures
maintenance and check against job requirements
• Computer systems 1.6 Follow OHS policies and procedures in line with
maintenance procedures job requirements
• PC systems 1.7 Check computer systems and networks for
• Computer operations maintenance against job/ service order or
• Electronic fault findings instructions and specifications

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 32 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)
• PPE LO 2. Maintain computer systems and TLE_IACSS9-
• Diagnosis of computer networks 12MRCN-IIf-j-41
systems and networks 2.1 Use appropriate PPE in line with standard
function procedures
• Maintenance of computer 2.2 Check normal function of computer systems and
systems and networks networks in accordance with manufacturer’s
• Repair or replace faulty instructions
system 2.3 Perform scheduled/ periodic maintenance in
• Contingency procedures in accordance with manufacturer’s requirements
response to unplanned 2.4 Repair materials when needed in accordance
events and conditions with established procedures
• Use and operation of tools, 2.5 Replace materials when needed in accordance
instruments, and testing with establish procedures
devices 2.6 Respond to unplanned events or conditions in
• Occupational health and accordance with established procedures
safety policies and
procedures

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES

• Job service order forms or

checklist
• Problem solving in
emergency situation
• Procedures in maintenance
scheduling
• Preventive maintenance of
computer system and
network
- Operating system
update
- Backup scheduling
- Creating restore point
- Guarding against virus
• Cleaning computer systems
and networks

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 33 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)

• Diagnostic procedures LO 3. Diagnose faults of computer systems TLE_IACSS912MRCN-

• Identifying and isolating and networks IIIa-h-
faults/problems 3.1 Use appropriate personal protective equipment 42
- Diagnostic software in line with standard procedures
utilities 3.2 Diagnose faults or problems in the computer
- Gathering of systems and networks according to
information requirements and in line with the standard
• Accomplished forms procedures
- Diagnostic reports 3.3 Manage contingency measures in accordance
- Proposal reports with established procedures
3.4 Implement contingency measures in accordance
with established procedures
3.5 Respond to unplanned events or conditions in
accordance with established procedures

• Defects in computer LO 4. Rectify/ correct defects in computer TLE_IACSS912MRCN-

systems and networks systems and networks IIIh-jIVa-e-43
• Troubleshooting and repair 4.1 Use appropriate PPE in line with standard
techniques procedures
• Problem solving in
emergency situation

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES

Corrective action 4.2 Replace defective components or parts without

- Hardware configuration damage to the surrounding environment or
- Software configuration services
4.3 Install correct components or parts without
damage to the surrounding environment or
services
4.4 Make the necessary adjustments in accordance
with established procedures
4.5 Respond to unplanned events or conditions in
accordance with established procedures

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 34 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)

• Testing methods and LO 5. Inspect and test the computer systems TLE_IACSS912MRCN-
procedures and networks IVf-j-44
5.1 Undertake final inspection so that the
• Documentation and making
configuration conforms to the manufacturer’s
reports
instructions/manual
• Waste management 5.2 Ensure that the configuration conforms to the
• OHS standards and 5S manufacturer’s instructions/manual
principles 5.3 Check/ test computer systems and networks to
• Practicing 3Rs ensure safe operation
• 3Rs environmental policies 5.4 Follow OHS standards and 5S principles
• Managing waste from according to enterprise policies
electrical and electronic 5.5 Clean worksite and make sure it is clear from all
equipment (WEEE) debris and left in safe condition in accordance
with company procedures
5.6 Dispose of excess components and materials
based on WEEE directives and 3Rs waste
management program
5.7 Prepare report according to company
requirements
5.8 Complete report according to company
requirements

GLOSSARY

Computer system - The complete computer comprises the central processing unit (CPU), memory and related electronics (main cabinet), all the peripheral
devices connected to it, and its operating system. Computer systems fall into two broad divisions: clients and servers. Client machines
fall into three categories from low to high end: laptop, desktop, and workstation. Servers range from small to large: low-end,
midrange, and mainframes.

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 35 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)
Computer network (or - A collection of computers and other hardware interconnected by communication channels that allow sharing of resources and
network) information. Where at least one process in one device is able to send/receive data to/from at least one process residing in a remote
device, then the two devices are said to be in a network. It is a group of devices connected to each other. Networks may be classified
into a wide variety of characteristics, such as the medium used to transport the data, communications protocol used, scale, topology,
benefit, and organizational scope.
Configuration - The makeup of a system; to "configure" is to choose options in order to create a custom system. “Configurability” is a system’s ability
to be changed or customized.
Connector - Any plug and socket that links two devices together. Although taken for granted and rarely in the limelight, connectors are a huge
industry, and the quality of these components is more critical than most people would imagine. When not designed or constructed
properly, they often become the weakest element in an electronic system.
Display adapter - A plug-in card in a desktop computer that converts the images created in the computer to the electronic signals required by the
monitor. It determines the maximum resolution, refresh rate, and number of colors that can be displayed, which the monitor must also
be able to support. On many PC motherboards, the display adapter circuits are built into the chipset, and an accelerated graphics port
(AGP) card or peripheral component interconnect (PCI) card is not required.
Expansion board - A printed circuit board that plugs into an expansion slot and extends the computer's capability to control a peripheral device. All the
boards (cards) that plug into a computer's bus are expansion boards, such as display adapters, disk controllers, network adapters, and
sound cards.
Expansion bus - An input/output bus typically comprises a series of slots on the motherboard. Expansion boards (cards) are plugged into the bus.
Inudstry standard architecture (ISA) and PCI are the common expansion buses in a personal computer (PC).
Graphical User Interface - A graphics-based user interface that incorporates movable windows, icons, and a mouse. The ability to resize application windows and
change style and size of fonts are the significant advantages of a GUI vs. a character-based interface. GUIs have become the standard
way users interact with a computer, and the major GUIs are the Windows and Mac interfaces along with Motif for Unix and the GNOME
and KDE interfaces for Linux.
LAN local area network) - A computer network that interconnects computers in a limited area such as a home, school, computer laboratory, or office building
using network media. The defining characteristics of LANs, in contrast to wide area networks (WANs), include their usually higher
datatransfer rates, smaller geographic area, and lack of a need for leased telecommunication lines.
Motherboard - Also called the “system board,” it is the main printed circuit board in an electronic device, which contains sockets that accept additional
boards. In a desktop computer, the motherboard contains the CPU, chipset, PCI bus slots, AGP slot, memory sockets, and controller
circuits for the keyboard, mouse, disks, and printer. It may also have built-in controllers for modem, sound, display and network,
obviating the need to plug in a card.
Networks - see computer network

Operating system - The master control program that runs the computer; the first program loaded when the computer is turned on, its main part, the
“kernel,” resides in memory at all times. The operating system sets the standards for all application programs that run in the computer.
The applications “talk to” the operating system for all user interfaces and file management operations.

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 36 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)
Peripheral - Any hardware device connected to a computer, such as a monitor, keyboard, printer, disk, tape, graphics tablet, scanner, joy
stick, paddle, or mouse
Server - A computer system in a network that is shared by multiple users. Servers come in all sizes from x86-based PCs to IBM
mainframes. A server may have a keyboard, monitor and mouse directly attached, or one keyboard, monitor and mouse may connect
to any number of servers via a KVM switch. Servers may be also be accessed only through a network connection as well.
Sound card - Also called a “sound board” or “audio adapter,” it is a computer expansion board that records and plays back sound, providing
inputs from a microphone or other sound source and outputs to speakers or an external amplifier. The de facto standard for sound card
compatibility in PCs is Creative Labs’ Sound Blaster.
User Interface - All graphics based today, the user interface includes the windows, menus and method of interaction between you and the
computer. Prior to the Mac, Windows, and Motif (UNIX) interfaces, all interaction was based on commands entered by the user.
Operating systems may support optional interfaces and allow a new shell, or skin, to be used instead.
Virus - Software used to infect a computer; after the virus code is written, it is buried within an existing program. Once that program
is executed, the virus code is activated and attaches copies of itself to other programs in the system. Infected programs copy the virus
to other programs.
WAN (wide area network) - A network that covers a broad area (i.e., any telecommunications network that links across metropolitan, regional, or national
boundaries) using private or public network transports. Business and government entities utilize WANs to relay data among employees,
clients, buyers, and suppliers from various geographical locations. In essence, this mode of telecommunication allows a business to
effectively carry out its daily function regardless of location.
WEEE Directive - A European Union (EU) directive on the prevention of waste electrical and electronic equipment (WEEE) and, in addition, the
reuse, recycling and other forms of recovery of such wastes so as to reduce the disposal of waste. The directive, which became
European Law in 2003, also seeks to improve the environmental performance of all operators involved in the life cycle of electrical and
electronic equipment, e.g., producers, distributors, and consumers and, in particular, those operators directly involved in the treatment
of waste electrical and electronic equipment.

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 37 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)
Code Book Legend
Sample: TLE_IACSS9-12AQS-Ia-1

LEGEND SAMPLE DOMAIN / COMPONENT CODE

Learning Area and Technology and Livelihood TLE Common Competencies

Strand Education Applying Quality Standards AQS
Subject or
First Entry Industrial Arts IA Performing Computer Operations PCO
Specialization
Computer Systems Servicing NC II CSS Performing Mensuration and Calculation PEMC
Grade Level 9 to 12 9-12 Preparing and Interpreting Technical Drawing PITD
Using Hand Tools UHT
Domain/Content/
Uppercase Letter/s Applying Quality Standards AQS Terminating and Connecting Electrical Wiring and TCEW
Component/ Topic
Electronics Circuit
- Testing Electronic Components TEC

Roman Numeral Core Competencies

*Zero if no specific Quarter First Quarter I Installing and Configuring Computer Systems ICCS
Quarter
Setting-Up Computer Networks SUCN
Lower case letter/s Setting-Up Computer Services SUCS
*put a an en dash Maintaining and Repairing Computer Systems and MRCN
(-) between letters Week Week one a Networks
to indicate more
than a specific week

1
Learning Assess quality of received
Arabic Number
Competency materials

Technology-Livelihood Education and Technical-Vocational Track specializations may be taken between Grades 9 to 12.

Schools may offer specializations from the four strands as long as the minimum number of hours for each specialization is met.

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 38 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)
Please refer to the sample Curriculum Map on the next page for the number of semesters per ICT specialization and those that have pre-requisites. Curriculum Maps may be
modified according to specializations offered by a school.

SAMPLE ICT CURRICULUM MAP** (as of May 2016)

Grade 7/8 (EXPLORATORY) GRADES 9-12

EXPLORATOR Co mputer Systems Servicing (NC II)+

updated based on TESDA Training Regulations released December 28,
2
8 sems
007

*Telecom OSP and Subscriber Line I

(Cop per Cable/POTS and DSL) ( nstallation
NC II)
4 sems
*Telecom O *Broadband
( Fiber OSP Installation (Fixed Installation
(Nptic Cable) SystWireless
C II) (N ems) C
II)
2 sems 2 sems

Illustrati on (NC II ) Technical Drafting ( NC I

I)
4 sems 4 sems

Computer rogramming ( Cont act Center Services

P on TESDA Training Re.Net Technology) (NC III)+
(N
updated based gulations released December 28, 2013
Y 4 C II) 4
sems 4 sems sems

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 39 of 40
 K TO 12 BASIC EDUCATION CURRICULUM
JUNIOR HIGH SCHOOL TECHNOLOGY AND LIVELIHOOD TRACK AND SENIOR HIGH SCHOOL – TECHNICAL-VOCATIONAL LIVELIHOOD TRACK
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER SYSTEMS SERVICING (NC II)
(640 hours)

Compu ter Programming (Java) (NC III)+ Animation (NC II)

updated based o ember 28, 2013 4
n TESDA Training Regulations released Dec sems 4 sems

Computer Programming (Oracle Med ical Transcription

Dat II)+ abase) (NC
(NC Iulations released Dec
updated based o
n TESDA Training Reg
ember 28, 2013 II) 4
4 sems sems
* Please note that these subjects have pre-requisites mentioned in the CG.
+ CG updated based on new Training Regulations of TESDA. **This is just a sample. Schools make their own curriculum maps
Pre-requisites of the subjects to the right should be taken up during these semesters. considering the specializations to be offered. Subjects may be taken up
at any point during Grades 9-12.

Reference:

Technical Education and Skills Development Authority-Qualification Standards Office. Training Regulations for Computer Systems Servicing NC II. Taguig City, Philippines:
TESDA, 2013.

K to 12 ICT – Computer Systems Servicing (NC II) Curriculum Guide May 2016 *LO – Learning Outcome Page 40 of 40