Scribd
Upload
113 views6 pages

Input Data For TVA KTA38 Puzzolana Surface Miner: Cummins Internal Use Only

This document requests input data from Puzzolana Mining Equipment to conduct a torsional vibration analysis for a KTA38 engine powering a Puzzolana surface miner. It lists the engine details and requests the complete driveline layout and inertia specifications for components like the torsional coupling, clutches, shafts, gearbox, and hydraulic pumps. The document notes that cylinder pressure data and many component details need to be provided by Puzzolana for the TVA to be completed.

Uploaded by

damodarvajja
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
113 views6 pages

Input Data For TVA KTA38 Puzzolana Surface Miner: Cummins Internal Use Only

This document requests input data from Puzzolana Mining Equipment to conduct a torsional vibration analysis for a KTA38 engine powering a Puzzolana surface miner. It lists the engine details and requests the complete driveline layout and inertia specifications for components like the torsional coupling, clutches, shafts, gearbox, and hydraulic pumps. The document notes that cylinder pressure data and many component details need to be provided by Puzzolana for the TVA to be completed.

Uploaded by

damodarvajja
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Input Data for TVA

KTA38
Puzzolana Surface
Miner

Cummins Internal Use Only


Engine details
 Engine Model/Capacity: KTA38

 Damper option :DA6196


 Flywheel option: FW6074

 Rating of the engine / FR sheet : FR6705 (1140 BHP @ 1750 RPM)

 Cylinder pressure data: Data need to be provided by PSBU

 Application: Mining – Surface Miner

 Complete driveline layout : Data need to be provided by PMF. Pls provide complete
layout details, with each and every part as mentioned in below reference image.

2
Rear driveline details
 Torsional coupling : Make and model name/part no – Data need to be provided by PMF
Inertia – primary part of the coupling: Data need to be provided by PMF
Inertia – secondary part of the coupling: Data need to be provided by PMF
Torsional stiffness (N-m/rad) : Data need to be provided by PMF
 Head drive clutch: Make and model name – Data need to be provided by PMF
Inertia (kg-m2) : Data need to be provided by PMF
Torsional stiffness (N-m/rad) : Data need to be provided by PMF
 Head drive pulley: Data need to be provided by PMF
Inertia (kg-m2) : Data need to be provided by PMF
Torsional stiffness (N-m/rad) : Data need to be provided by PMF

3
Front driveline details
 Front end propeller shaft : Make & Model Part No: Data need to be provided by PMF
Inertia (kg-m2) : Data need to be provided by PMF
Torsional stiffness (N-m/rad) : Data need to be provided by PMF
 Pump drive gear box: Data need to be provided by PMF
Inertia: . Data need to be provided by PMF
Torsional stiffness: Data need to be provided by PMF
Gear ratio: Data need to be provided by PMF

 Hydraulic pumps, See next slide

4
Hydraulic Pumps
 Hydraulic Pumps (right side refers to the side of the gearbox facing the engine)
 Track pumps (right side, quantity of 4)
Make: Data need to be provided by PMF
Model/part number: Data need to be provided by PMF
Inertia – rotating group: Data need to be provided by PMF
Torsional stiffness: Data need to be provided by PMF
 Conveyor pumps (left side, rear pad, quantity of 2)
Make: Data need to be provided by PMF
Model/part number: Data need to be provided by PMF
Inertia – rotating group: Data need to be provided by PMF
Torsional stiffness: Data need to be provided by PMF
 Engine cooler fan pump (left side, center pad right, quantity of 1)
Make: Data need to be provided by PMF
Model/part number: Data need to be provided by PMF
Inertia – rotating group: Data need to be provided by PMF
Torsional stiffness: Data need to be provided by PMF

5 Cummins Confidential
Hydraulic Pumps Cont.
 Oil cooler fan pump (left side, center pad left, quantity of 1)
Make: Data need to be provided by PMF
Model/part number: Data need to be provided by PMF
Inertia – rotating group: Data need to be provided by PMF
Torsional stiffness: Data need to be provided by PMF
 Stack valve pumps (left side, front pad, quantity of 2)
Make: Data need to be provided by PMF
Model/part number: Data need to be provided by PMF
Inertia – rotating group: Data need to be provided by PMF
Torsional stiffness: Data need to be provided by PMF

NOTE: Above mentioned Pumps are for example. Pls provide correct pumps details used in PMF Surface Miner
Application.

Each and Every Part Details has to be provided by PMF for TVA.

6 Cummins Confidential

You might also like