A1000 Catalogue

YASKAWA AC Drive
High Performance Vector Control

A1000
200 V CLASS, 0.4 to 110 kW
400 V CLASS, 0.4 to 630 kW
Certified for
ISO9001 and
ISO14001
JQA-QMA14913 JQA-EM0202
The Birth of Yaskawa s Ace Drive
Offering limitless possibilities....
A top quality drive: silent, beautiful, and incredibly powerful. Perfectly designed functions
open a new field with A1000. A product only possible from Yaskawa, knowing everything
there is to know about the world of drive technology to create the most efficient operation
possible with an inverter drive. You just have to try it to know how easy it is to use. High
level, Yaskawa quality. Integrating the latest vector control technology in a
general-purpose drive with the performance of a higher order demanded by the drives
industry. A 1000 is the answer to user needs, carrying on the Yaskawa traditions of
absolute quality in this next generation product line.
2
Contents
Features 4
Features for Every Application 10
Product Lineup 14
Model Selection 15
Software Functions 16
Parameter List 18
Basic Instructions 24
Standard Specifications 26
Standard Connection Diagram 28
Dimensions 30
Fully-Enclosed Design 32
Peripheral Devices and Options 34
Application Notes 60
YASKAWA AC Drive Series 66
Global Service Network 67
RoHS
compliant
3
Note: The max. applicable motor capacity (kW) cited in this catalog indicates the capacity for the Heavy Duty (HD) rating.
The Most Advanced Drive Technology Cutting-Edge Torque Characteristics

Capable of driving any kind of motor. Powerful torque at 0 Hz, without a motor encoder*
A1000 runs not only induction motors, but also synchro- Once out of reach for AC drives, Yaskawa now offers advanced
nous motors like IPM and SPM motors with high perfor- control features without a motor encoder. Achieve even more
mance current vector control. powerful starting torque at zero speed with an IPM motor.
* No speed sensors or pole sensors required.
Minimize equipment needed for your business Synchronous Motor
by using the same drive to run induction and
synchronous motors. Advanced Open Loop Vector Control for PM
200% rated torque at 0 r/min*1, speed range of 1: 100*2
Note: Valid when high frequency injection is enabled (n8-57=1).
Switch easily between motor types with a single
parameter setting. Closed Loop Vector Control for PM
200% rated torque at 0 r/min*1, speed range of 1: 1500
*12:: Achieving this torque output requires a larger capacity drive.

Use parame- * Contact your Yaskawa or nearest agent when using PM motors
except SSR1 series or SST4 series motors manufactured by
ters to switch
between mo- Yaskawa Motor Co., Ltd.
A1000 tor types
Torque characteristics
Advanced Open Loop Vector Control for PM with an IPM motor
Momentary rating
Powerful torque at 0 Hz 200
Induction motor
Synchronous motor Synchronous motor
Torque (%)
(SPM) (IPM)
EMR1 Series Super Energy-Saving Motor
Ultra-compact, ultra-light Compact, light 100
Energy saving, high efficiency Energy saving, high efficiency
Features
High-performance control High starting torque without an encoder.
without a motor encoder Positioning capability without an encoder.
200 V: 0.4 to 75 kW
Capacities 200 V: 0.4 to 7.5 kW
400 V: 0.4 to 300* kW
* 160 kW without PG
0 1000 1800
Motor Speed (r/min)
Rotor Positioning without Motor Encoder Comparing the speed control range
Advanced Open Loop Vector Control for PM with an IPM motor
Use an IPM motor to perform position control 60 s rating
without motor feedback. A1000

Greater range 150
Electrical saliency in IPM motors makes it possible to of operation 130
Previous model
detect speed, direction, and rotor position without the
Torque (%)
use of a motor encoder. 85
Precision positioning functionality without an up- 50

per controller.
Visual programming in DriveWorksEZ lets the user eas-
ily create a customized position control sequence, with- 0 10 33 100
out the use a motor encoder. Motor Speed (%)
No PG needed High-performance current vector control achieves

powerful starting torque with an induction motor.
Rotating body
Induction Motor
Open Loop Vector Control

Start position Setpoint 200% rated torque at 0.3 Hz*, speed range of 1:200
Speed
Closed Loop Vector Control
Run command
Time
200% rated torque at 0 r/min*, speed range of 1:1500
* Achieving this torque output requires a larger capacity drive.

Positioning
complete
No controller
4 needed
Features
Loaded with Auto-Tuning Features Tackling Power Loss and Recovery
Auto-Tuning features optimize drive parameters A1000 offers two ways to handle momentary
for operation with induction motors as well as power loss.
synchronous motors to achieve the highest per-
formance levels possible. A1000 is capable of handling momentary power loss for induction mo-
tors as well as synchronous motors-- without the use of a motor encoder.
Perfects not only the drive and motor perfor-
Speed Search
mance, but also automatically adjusts settings
relative to the connected machinery. Easily find the speed of a coasting motor for a smooth restart.
Applications
A variety of ways to automatically optimize drive
Perfect for fans, blowers, and other rotating, fluid-type applications.
settings and performance
Tuning the Motor Power supply

voltage
Rotational Applications requiring high starting torque, high
Auto-Tuning speed, and high accuracy. Motor speed
Stationary Applications where the motor must remain con-
Auto-Tuning nected to the load during the tuning process. Output frequency
Line-to-Line For re-tuning after the cable length between
Resistance the motor and drive has changed, or when 1750 r/min
Auto-Tuning motor and drive capacity ratings differ.
Energy-Saving For running the motor at top efficiency all the 1750 r/min
Auto-Tuning time.
Suppresses current for a
fast, smooth start
Tuning the Load
Output current
Optimizes the drive s ability to decelerate the
Inertia Tuning load. Useful for applications using KEB and 500 ms Coasting motor
Feed Forward functions.
ASR* Gain Auto-Tuning
Automatically adjusts ASR gain to better
* lator
Automatic Speed Regu-
match the frequency reference. KEB
Note: This type of Auto-Tuning is available only for motors less than 450 kW
Keep the motor running without allowing it to coast.
using an encoder. Applications
Brand-new Auto-Tuning methods. Highly recommended for film lines and other applications re-
A1000 continuously analyzes changes in motor char- quiring continuous operation.
acteristics during run for highly precise speed control.
Power supply
voltage
Smooth Operation Motor speed
Output frequency
Smooth low speed operation thanks to even bet-
ter torque ripple suppression. 1750 r/min
Comparing torque ripple at zero speed (Closed Loop Vector)
（0.5%/div）
Uses regenerative energy to
keep the application running
Output current
Previous model
Note: Requires a separate sensor to detect power loss.
Torque (%)
The drive may trip depending on load conditions,

and the motor coast to stop.
Ride through power loss for up to 2 seconds.*

A1000
・Crucial for semi-conductor manufacturers
・No need to purchase a back-up power supply
・Detects, outputs an undervoltage signal during power
loss
Time (s)
* The Momentary Power Loss Recovery Unit option may be required
depending on the capacity of the drive.
5
Energy Saving Environmental Features
Next-Generation Energy Saving Protective Design
Loaded with the most advanced energy-saving control technology* A variety of protective designs are available to
Energy Saving control makes highly efficient operation pos- reinforce the drive against moisture, dust, oil
sible with an induction motor. mist, vibration, corrosive sulfur gas, conductive
* Available for models less than 450 kW. particles, and other harsh environments.
Amazing energy saving with a synchronous motor*
Combining the high efficiency of a synchronous motor along with A1000 s RoHS
Energy Saving control capabilities allows for unparalleled energy saving.
All standard products are fully compliant with the
* Available for models less than 450 kW. EU s RoHS directive. RoHS
Efficiency using a motor drive compliant
Example shows a 200 V 3.7 kW drive in a fan or pump application.
Noise Reduction
90
A1000 uses Yaskawa s Swing PWM function* to
suppress electromagnetic and audible motor noise,
80 13% creating a more peaceful environment.
higher
6.6% * Available for models less than 450 kW.
Efficiency (%)
higher Comparing our former product line with our new Swing PWM feature
70
Synchronous motor Previous models A1000
+Energy Saving Control
60 Induction motor
+ Energy Saving Control
50 23.3%
Induction motor only quieter
(no Energy Saving)
40
0 50 100
Motor Speed (%) Note: Calculated by comparing peak values during noise generation
Suppressing Power Supply Harmonics

Examples of energy saving with drives
A DC reactor minimizes harmonic distortion,
standard on drives 22 kW and above.
Conditions
A : Induction motor + A1000 Standard

No reactor
B : IPM motor + A1000 Waveform
Annual energy savings for an HVAC fan application running 100 3.7 distortion
kW motors. Electric costs of 15 cents/kWH, operating 365 days/year 88%
DC reactor
Waveform
Annual Energy Savings distortion
40%
A : Induction motor + A1000
Total Energy Savings
Power consumption: 1,903,100 kWH $22,300
Standard Models CIMR-A □ 4A0930 and 4A1200
Electrical costs: $285,500 are compatible for operation with 12- phase
rectification.*
B : IPM motor + A1000
* Requires a separate 3-winding transformer.
Power consumption: 1,754,600 kWH
Electrical costs: $263,200
Annual savings on energy costs: (A) vs. (B)
$285,500 $263,200
Energy saved: 148,500 kWH
Electrical costs: $22,300 A B
Annual reduction in CO2

148,500 kWH×0.412÷1,000 = 61.2 tons!
Assumes 1 kWH of power consumed creates 0.412 kgCO2/kWh of CO2
6
Features
Safety
Safety Regulations Controlled Stop Despite Power Loss
The products comply with ISO/EN13849-1 Cat.3 Should a power outage occur, A1000 can bring
PLd and IEC/EN61508 SIL2 (two safety inputs the application to controlled stop quickly and
and one EDM output). safely using the KEB function.
An External Device Monitor (EDM) function has Quickly ramp to stop with KEB function
also been added to monitor the safety status of Applications
the drive. Perfect for spindle drive application and film production lines where stop-
Safe Disable example: Door switch circuit ping methods are crucial to the application to reduce production cost.
A1000 is equipped with 2 input terminals and a single output Previous model
terminal for connecting a safe disable device.
Input: Triggered when either terminal H1 or H2 opens.
Output: EDM output monitors the safety status of the drive.
Power
supply
Safety
voltage
S1
Standards
Compliance
Power supply
S2 A1000
Motor
Open door
speed
Controller
EN954-1 Safety Coasting to stop takes time and
HC
Cat. 3 Device endangers the application
Sink/source
Feedback Loop switch
H1 Uncontrolled coast to stop
H2
EDM DM+
Logic
DM−
circuit
A1000
Motor
Power
supply
voltage
Motor
speed
Motor decelerates quickly
to protect the application
Controlled ramp to stop
7
Even More and More Compact
Yaskawa continues to make applications even smaller Dual Rating allows for an even more compact setup
by combining the world s smallest drive in its class with Each drive lets the user choose between Normal Duty or Heavy
the light, efficient design of a synchronous motor. Duty operation. Depending on the application, A1000 can run
Comparing drive dimensions a motor an entire frame size larger than our previous model.
Example: 400 V Class 75 kW Select the drive rating that best fits the application needs
F7 Previous model A1000
Previous
model
55.4% 15 kW motor requires a 15 11 kW drive can now run a 15 kW
smaller kW drive. motor– an entire frame size larger
A1000
15 kW 15 kW
motor motor
15 kW 11 kW
Comparing motor dimensions
Example: 200 V 3.7 kW motor
64% Dual Ratings in A1000
Induction motor smaller
A single parameter lets the user set the
Synchronous drive for Normal Duty or Heavy Duty
motor EMR1 Series Motor Applications
Heavy Duty 11 kW For conveyors,
motor cranes...
Use Side-by-Side installation* for an even more Normal Duty 15 kW For fans,
A1000 motor pumps...
compact setup.
*
For models up to 18.5 kW. 11 kW/15 kW
Note: Always select a drive with a current rating greater than the motor rated
Finless models* also available. current.
* For models 400 V class 22 to 75 kW.

Breeze-Easy Setup
Customize Your Drive
Immediate setup with Application Presets
DriveWorksEZ visual programming tool with all A1000 automatically sets parameters needed for most major applications.
models Simply selecting the appropriate application instantly optimizes the drive
Simply drag and drop icons to completely customize your for top performance, saving enormous time setting up for a trial run.
drive. Create special sequences and detection functions,
then load them onto the drive.
Program a customized sequence HVAC Fan Pump

Example: Positioning control without a motor encoder
Feeding
position
position
Reference
Home
Home
Speed
Compressor Conveyor Hoist, Crane
A1000 IPM motor Time (s)

Example using Application Presets
Create customized detection features Selecting Conveyor" optimizes five parameter settings so the drive
Example: Machine weakening analysis using torque pulse detection is ready to start running your conveyor application immediately.
Detects fluctuation
within the specified range
Torque
Pulley Torque
amplitude
Timer setting
A1000 Motor
Time (s) Setting Application
USB for connecting to a PC 00 General-purpose
Parameters are programmed automatically
01 Water Supply Pump A1-02 Control mode selection

USB port lets the drive connect to a PC 02 Conveyor
C1-01 Accel Time 1
Note: Drives are also equipped 03 Exhaust Fan
with an RJ-45 comm. C1-02 Decel Time 1
port that takes the exist-
04 HVAC Fan
ing WV103 cable used 05 Air Compressor C6-01 ND/HD Selection
USB
in Yaskawa s previous 06 Crane (Hoist)
models. Simply remove
port the operator keypad for
07 Crane (Traverse)
to the RJ-45 connector.
8
Features
Variety of Braking Functions Easy Maintenance
Overexcitation deceleration brings the motor to an The First Terminal Board with a
immediate stop without the use of a braking resistor. Parameter Backup Function
All models up to 30 kW are equipped with a brak-
ing transistor for even more powerful braking op- The terminal block s ability to save parameter setting
tions by just adding a braking resistor. data makes it a breeze to get the application back on-
0.4 18.5 30 kW
line in the event of a failure requiring drive replacement.
Previous A1000 Terminal Block

Model Built-in braking transistor up to 18.5 kW
Parameter
A1000 Built-in braking transistor up to 30 kW
Name Number Setting
ND/HD Selection C6-01 1
Control Mode Selection 1 A1-02 0
All Major Serial Network Protocols Frequency Reference Selection 1

Run Command Selection 1
b1-01
b1-02
1
1
RS-422/485 (MEMOBUS/Modbus at 115.2 kbps) standard on all models.

Option cards available for all major serial networks Engineering Tool DriveWizard Plus
used across the globe: PROFIBUS-DP, DeviceNet,
CC-Link, CANopen, LONWORKS, MECHATROLINK- , Manage the unique settings for all your drives
MECHATROLINK- , among others. right on your PC.
Note: Registered trademarks of those companies.
Less wiring and space-saving features make for An indispensable tool for drive setup and maintenance. Edit param-
easy installation and maintenance. eters, access all monitors, create customized operation sequences,
and observe drive performance with the oscilloscope function.
Application-Specific Software
The Drive Replacement feature in DriveWizard Plus saves
Software for cranes, and for high-frequency output valuable time during equipment replacement and application
applications, are available. upgrades by converting previous Yaskawa product param-
eter values to the new A1000 parameters automatically.
Long Life Performance Drive Replacement Function
Previous model A1000

Ten Years of Durable Performance
Cooling fan, capacitors, relays, and IGBTs have been carefully
Varispeed F7
selected and designed for a life expectancy up to ten years.*
* Assumes the drive is running continuously for 24 hours a day at 80% load
with an ambient temperature of 40˚C with an IP00 open-chassis enclosure.
Instant setup
Motor Life
Thanks to relatively low copper loss in the rotor and
a cool shaft during operation, synchronous motors DriveWizard Plus
have a bearing life twice that of induction motors. Varispeed F7S
Performance Life Monitors Note: To obtain a copy of DriveWizard Plus, contact Yaskawa.
Yaskawa s latest drive series is equipped with performance
life monitors that notify the user of part wear and mainte-
nance periods to prevent problems before they occur. Parameter Copy Function
Drive outputs a signal to the control device indicating
All standard models are equipped with a Parameter Copy
components may need to be replaced
function using the keypad that allows parameter settings to
be easily copied from the drive or uploaded for quick setup.
Operator Display Corresponding Component
Alarm!! A USB Copy Unit is also available as an even
LT-1 Cooling fan
LT-2 Capacitors faster, more convenient way to back up settings
LT-3 Inrush prevention relay and instantly program the drive.
LT-4 IGBTs
9
Features for Every Application
A1000 is loaded with functions to match

the particular needs of every application.
Functions
Cranes
Advantages
1 Application Presets
Selecting Crane from A1000 s Application Presets automatically programs
Application
Presets
Motor 2
Switch
IM/PM
Switch
A1000 for optimal performance with a crane application. Save valuable set-
Torque Overexcitation Drive
up time and start running immediately. Limit Braking WorksEZ
2 Switch Between Motors

Use the same drive to control one motor for hoisting, another motor for tra-
Current
Vector
Speed
Search
Zero Servo
Function
Control
verse operation. Terminal inputs let the user set up a relay to switch back
and forth between motors.
Maintenance Accel/Decel Torque
Monitors Time Switch Detection
3 Powerful Starting Torque

Powerful torque at low speeds ensures the power needed for the applica- KEB
tion and prevents problems with slipping. Function
4 Safety Functions
The Safe Disable function comes standard for compliance with various
NEW
Functions Indicates a new function in A1000
safety regulations.
Applications
5 Visual Programming with DriveWorksEZ

Easily customize the drive using a PC.
6 Performance Life Diagnostic Features

A1000 notifies the user or controller when maintenance may be required for
Hoist, Crane Shutter
Door
certain components such as the cooling fan or capacitors.
7 Terminal Block with Parameter Backup Function

The terminal block can be transferred to a new drive keeping all terminal
wiring intact, and built-in memory backs up all parameter settings. An
incredible time saver when replacing a drive.
10
Functions
Fans and Pumps
Momentary
Advantages
Selecting Fan or Pump from A1000 s Application Presets automatically programs A1000 for optimal
Application
Presets
IM/PM
Switch
Power Loss
Ride-Thru
performance specific for those applications. Save valuable setup time and start running immediately. Watt-Hour
Overexcitation Frequency
2 Yaskawa offers a compact solution for both drive and motor.

Compact Design Braking
Pulse
Monitor
Reference
Loss
・Dual ratings Accel/Decel Energy Fault

Time Switch Saving Restart
Selecting Normal Duty makes it possible to use a smaller drive.
・Combine with a synchronous motor
Run a synchronous motor instead of an induction motor for an even more compact installation. Speed Drive Overvoltage
Search WorksEZ Suppression
3 Astounding Efficiency 90
ECOiPM motor
Total Efficiency (%)
(EMR1 Series)
Carrier
Combine A1000 with a synchronous 85 Frequency Frequency
IPM motor PID Control
motor and save on energy costs. (Super Energy
Jump Reduction at
Overload
80 Saving Motor) 7. 1% 8.8%
higher higher
4 Output Power Pulse Monitor

Pulse output feature can send a signal to
75 Standard induction motor Frequency
Reference
Torque
Detection
Maintenance
Monitors
70 Hold
the PLC to keep track of kilowatt hours. No 0.4 0.75 1.5 2.2 3.7 5.5 7.5 11 15
extra power meter needed. Motor Capacity (kW) NEW
Functions Indicates a new function in A1000
Note: Cannot legally be used as proof of power consumption.
5 Speed Search
Yaskawa s unique speed search functions easily carry the motor through momentary power
Applications
loss. No back-up power supply needed to keep the entire application running smoothly.
6 24 V Control Power Supply Option

Lets the user monitor drive data from a PLC even when the power goes out. HVAC Fan Pump

The terminal block can be transferred to a new drive keeping all terminal wiring intact, and built-in memory
backs up all parameter settings. An incredible time saver when replacing a drive.

A1000 notifies the user or controller when maintenance may be required for cer-
tain components such as the cooling fan or capacitors.
9 Low Harmonic Distortion

DC reactor comes standard on all model above 22 kW to minimize harmonic
distortion. This built-in feature saves installation space and wiring. 11
A1000 is loaded with functions to match

the particular needs of every application.
Functions
Metal Working
Advantages
1 KEB Function
The KEB function can quickly decelerate the motor to stop in case of a
KEB
Function
Overexcitation
Braking
Pulse Train
Input
power outage, rather than putting equipment at risk by simply allowing the
Fault Speed Pulse Train
motor to coast. Easy to program to match application needs. Restart Search Output
2 Overvoltage Suppression
Particularly beneficial for die cushion and other press-type machinery, over-
Overvoltage
Suppression
Dwell
Function
Torque
Detection
voltage suppression prevents faults and keeps the application running.
Carrier
Current
Frequency Torque
3 Easily customize the drive using a PC.
Visual Programming with DriveWorksEZ Reduction at
Overload
Vector
Control
Limit
Maintenance Drive Zero Servo
4 Safety Functions
Safe Disable feature comes standard for compliance with various safety
Monitors WorksEZ Function
NEW
Indicates a new function in A1000
regulations. Functions
5 Current Vector Control

Protect connected machinery by controlling torque directly through torque
Applications
detection and torque limits offered by current vector control.

A1000 notifies the user or controller when maintenance may be required for Press Machine
Tool
certain components such as fan or capacitors.

The terminal block can be transferred to a new drive keeping all terminal
wiring intact, and built-in memory backs up all parameter settings. An in-
credible time saver when replacing a drive.
12
機能
Functions
Conveyor Systems
Advantages
Selecting Conveyor from A1000 s Application Presets presets automati-
Application
Presets
Drive
WorksEZ
Current
Vector
Control
cally programs A1000 for optimal performance specific for those applica-
Overexcitation PID Torque
tions. Save valuable setup time and start running immediately. Braking Control Limit
2 Safety Functions
Safe Disable feature comes standard for compliance with various safety regulations. Droop Pulse Train Zero Servo
Control Input Function
3 Astounding Efficiency
Combine A1000 with a synchronous motor to save on energy costs. Save IM/PM Pulse Train Fault
further but still maintain high performance by eliminating the motor encoder. Switch Output Restart
4 Overexcitation
Braking DC voltage
Normal Deceleration
DC voltage
Overexcitation Deceleration
Online
Tuning
Torque
Detection
Maintenance
Monitors
Output Deceleration Time Output Deceleration Time
Bring the motor to an frequency 12.7 s frequency 6.4 s
NEW
Indicates a new function in A1000
immediate stop without Output Output
Functions
current current
the use of a braking re-
50% Faster!
sistor (IM motors only). Note: Varies in accordance with motor specifications and load. Applications
5 Easily customize the drive using a PC.
Visual Programming with DriveWorksEZ
6 24 V Control Power Supply Option

Lets the user monitor drive data from a PLC even when the main power is removed. Conveyor
7 Verify Menu
Quickly reference any settings
Changed Value
Name Parameter Default Set Value
Frequency Ref. Selection1 b1-01 1 0
that have been changed from Acceleration Time1 C1-01 10.00 s 15.00 s
Deceleration Time1 C1-02 10.00 s 15.00 s
their original default values.

A1000 notifies the user or controller when maintenance may be required for
certain components such as fan or capacitors.
9 Low Harmonic Distortion

DC reactor comes standard on all model above 22 kW to minimize harmonic
distortion. This built-in feature saves installation space and wiring. 13
Product Lineup
Three-Phase 200 V Three-Phase 400 V

Motor
Capacity Normal Duty Heavy Duty Normal Duty Heavy Duty
(kW)
Model Rated Output Model Rated Output Model Rated Output Model Rated Output
0.4 CIMR-A □ 2A0004 3.2 A CIMR-A □ 4A0002 1.8 A
0.75 CIMR-A □ 2A0004 3.5 A CIMR-A □ 2A0006 5A CIMR-A □ 4A0002 2.1 A CIMR-A □ 4A0004 3.4 A
1.1 CIMR-A □ 2A0006 6A CIMR-A □ 2A0008* 6.9 A
1.5 CIMR-A □ 2A0008* 8A CIMR-A □ 2A0010 8A CIMR-A □ 4A0004 4.1 A CIMR-A □ 4A0005 4.8 A
2.2 CIMR-A □ 2A0010 9.6 A CIMR-A □ 2A0012 11 A CIMR-A □ 4A0005 5.4 A CIMR-A □ 4A0007 5.5 A
3.0 CIMR-A □ 2A0012 12 A CIMR-A □ 2A0018* 14 A CIMR-A □ 4A0007 6.9 A CIMR-A □ 4A0009 7.2 A
3.7 CIMR-A □ 2A0018* 17.5 A CIMR-A □ 2A0021 17.5 A CIMR-A □ 4A0009 8.8 A CIMR-A □ 4A0011 9.2 A
5.5 CIMR-A □ 2A0021 21 A CIMR-A □ 2A0030 25 A CIMR-A □ 4A0011 11.1 A CIMR-A □ 4A0018 14.8 A
7.5 CIMR-A □ 2A0030 30 A CIMR-A □ 2A0040 33 A CIMR-A □ 4A0018 17.5 A CIMR-A □ 4A0023 18 A
11 CIMR-A □ 2A0040 40 A CIMR-A □ 2A0056 47 A CIMR-A □ 4A0023 23 A CIMR-A □ 4A0031 24 A
18.5 CIMR-A □ 2A0069 69 A CIMR-A □ 2A0081 75 A CIMR-A □ 4A0038 38 A CIMR-A □ 4A0044 39 A
CIMR-A □ 2A0360 360 A CIMR-A □ 2A0415 415 A CIMR-A □ 4A0208 208 A CIMR-A □ 4A0250 216 A
110
CIMR-A □ 2A0415 415 A
132 CIMR-A □ 4A0250 250 A CIMR-A □ 4A0296 260 A
160 CIMR-A □ 4A0296 296 A CIMR-A □ 4A0362 304 A
185 CIMR-A □ 4A0362 362 A CIMR-A □ 4A0414 370 A
220 CIMR-A □ 4A0414 414 A CIMR-A □ 4A0515 450 A
250 CIMR-A □ 4A0515 515 A
315 CIMR-A □ 4A0675 605 A
355 CIMR-A □ 4A0675 675 A
450 CIMR-A □ 4A0930 810 A
500 CIMR-A □ 4A0930 930 A
560 CIMR-A □ 4A1200 1090A
630 CIMR-A □ 4A1200 1200 A
Model Number Key * Available in Japan only

CIMR- A A 2 A 0004 F A A
AC Drive A1000 Series Design Revision Order
No. Region Code No. Voltage Class No. Customized Specifications No. Output Current A No. Enclosure Type No. Environmental Specifications
T Asia 2 3-phase, 200-240 Vac A Standard model Note: Indicates the rated A IP00 A Standard P Moisture, dust, vibration
output current of the
A Japan 4 3-phase, 380-480 Vac Note: Contact Yaskawa for Normal Duty rating F UL Type 1 K Gas R Gas, vibration
information on software
for cranes and for
rounded off to the J* Finless (IP20) M Humidity, dust S Shock, vibration
nearest whole
high-frequency output number. L Finless (IP00) N Oil T Oil, vibration
applications.
* □Available only for models CIMR-A
4A0058 to 4A0165.
Note: Contact a Yaskawa for more
on environmental
Note: Contact Yaskawa for information on specifications.
14 Finless (IP00) Type enclosure drives.
Model Selection
Optimizing Control for Each Application

A1000 offers two separate performance ratings: Normal Duty and Heavy Duty.
Heavy Duty is capable of creating more powerful torque, while Normal Duty allows the drive to operate a larger motor.
Difference between load ratings:

Normal Duty Rating Heavy Duty Rating
Product Lineup / Model Selection

Parameter settings C6-01=1 C6-01=0 (default)
Overload tolerance 120% for 60 s 150% for 60 s
Carrier frequency Low carrier frequency (Swing PWM)* Low carrier frequency
* Use Swing PWM to quiet undesirable motor noise generated when operating with a low carrier frequency.
Available for models less than 450 kW.
Normal Duty Applications Heavy Duty Applications
Applications Applications
HVAC Fan Pump Compressor Conveyor Hoist, Crane
Extruder Punching Press Winder Machine Tool
Selecting a Drive Selecting a Drive

For a fan application using a 11 kW motor, select For a conveyor application using an 11 kW motor, select
CIMR-A □ 2A0040 and set it for Normal Duty perfor- CIMR-A □ 2A0056 and set it for Heavy Duty performance
mance (C6-01 = 1). (default).
Model: CIMR-A □ 2A0040 Model: CIMR-A □ 2A0056
Normal Duty: 11 kW 11 kW Fan Heavy Duty: 11 kW 11 kW Conveyor
M M
Use the table below to transition from Varispeed F7 and Varispeed F7S to the A1000 series (assumes a Heavy Duty rating).
Power Supply 200 V 400 V (assumes a Heavy Duty rating)
Varispeed F7 Varispeed F7S A1000 Varispeed F7 Varispeed F7S A1000
Model
CIMR-F7A2 CIMR-F7S2 CIMR-A 2A CIMR-F7A4 CIMR-F7S4 CIMR-A 4A
Induction Motor Induction Motor
Applicable Motor Induction Motor Synchronous Motor Induction Motor Synchronous Motor
Synchronous Motor Synchronous Motor
0.4 0P4 0P4 0004 0P4 0P4 0002
0.75 0P7 0P7 0006 0P7 0P7 0004
1 .5 1P5 1P5 0010 1P5 1P5 0005
2 .2 2P2 2P2 0012 2P2 2P2 0007
3 .7 3P7 3P7 0021 3P7 3P7 0011
5 .5 5P5 5P5 0030 5P5 5P5 0018
Max. Applicable Motor Capacity (kW)
7 .5 7P5 7P5 0040 7P5 7P5 0023

11 011 011 0056 011 011 0031
15 015 015 0069 015 015 0038
18.5 018 018 0081 018 018 0044
22 022 022 0110 022 022 0058
30 030 030 0138 030 030 0072
37 037 037 0169 037 037 0088
45 045 045 0211 045 045 0103
55 055 055 0250 055 055 0139
75 075 075 0312 075 075 0165
90 090 – 0360 090 090 0208
110 110 – 0415 110 110 0250
132 – – – 132 132 0296
160 – – – 160 160 0362
185 – – – 185 220 0414
220 – – – 220 300 0515
315 – – – 300 300 0675
15
Software Functions
Loaded with software functions New

Functions New A1000 software not available for the F7.
just right for your application. Note: Major functions listed below.
No need to struggle with difficult pa- Functions for Top Performance

Application
Presets rameters and complex calculations.
Parameters are set instantly simply by se-
lecting the appropriate Application Preset. Run both IM and PM motors with a single drive.
IM/PM The most advanced motor drive technol-
Switch
ogy can run both IM and PM motors, al-
Functions at Start and Stop
lowing for even greater energy savings
and a more compact setup.
Optimal deceleration without need-
Optimal
Deceleration ing to set the deceleration time. Watt-Hour No extra watt hour meter needed.
Drive slows the application smoothly con- Pulse A pulse output lets the user monitor pow-
trolling DC bus voltage. Monitor er consumption.*
* Cannot legally be used as proof of power consumption.
Perfect for applications with high load
Overexcitation
Braking inertia that rarely need to be stopped. Automatically runs at top efficiency.*
Stop quickly: 50% faster without the use Energy The drive supplies voltage to the motor rela-
Saving
of a braking resistor. tive to the speed and load so that the applica-
Note: Stopping times may vary based on motor characteristics. tion is for operating at the most efficient level.
* Not available in models 450 kW and above.
Start a coasting motor.
Speed Automatically brings a coasting motor
Search Enables high-precision operation.
back to the target frequency without us- Online Automatically adjusts resistance between
ing a motor encoder. Tuning
motor conductors during operation, thus im-
proving speed accuracy when there are mo-
Accelerate and decelerate tor temperature fluctuations. This function
Dwell
Function smoothly with large inertia loads. is active only for Open Loop Vector Control.
Drive prevents speed loss by holding the
output frequency at a constant level dur-
Current Achieve high levels of performance.
ing acceleration and deceleration. The drive comes with current vector control
Vector
Control capabilities for high performance applications.
Switch easily between accel/decel times.
Accel/Decel Switch acceleration and deceleration rates
Time Switch
when running two motors from the same
Customize the perfect drive to fit your needs.
drive, or assign specific accel/decel rates Drive Upper controller circuitry and drive I/O
when operating at high speed or at low speed. WorksEZ
terminals can be programmed so that ex-
tra hardware is no longer needed. Drag-
Reference Functions and - drop. Visual programming makes
customization a breeze.
Frequency Limit motor speed. Automatic PID control.

Reference Set speed limits and eliminate the need
Upper/Lower PID Control The internal PID controller fine-tunes the
Limits for extra peripheral devices and extrane- output frequency for precise control of
ous hardware. pressure, flow, or other variables.
Skip over troublesome resonant frequencies. One drive runs two motors.
Frequency Drive can be programmed to avoid ma -
Jump Motor 2 Use a single drive to operate two different
chine resonance problems by avoiding con- Switch
motors. Only one PM motor may be used.
stant speed operation at certain speeds.
Frequency Improved operability. Improved operability.

Reference Momentarily hold the operating frequency Pulse Train Use the Pulse Train Input to control not
Hold during acceleration or deceleration as the Input
only the frequency reference, but also PID
load is lowered or raised. feedback and PID input.
Balances the load automatically Improved monitor functions.

Droop
Control between motors. Pulse Train Pulse output lets the user observe every-
Calculates the ratio of the load torque Output
thing from the frequency reference and out-
and adjusts motor speed accordingly. put frequency to motor speed, softstart out-
put frequency, PID feedback, and PID input.
16
Protects the load and helps Continuous Keeps the application running.
Torque Run during
Software Functions
ensure continuous operation. Maintains continuous operation even if
Detection Reference
An output terminal is triggered when mo- Loss the controller fails or frequency reference
tor torque rises above or falls below a is lost. An indispensable feature for large
specified level. Useful as an interlock sig- HVAC applications.
nal for protecting equipment when blade
problems arise in a machine tool applica- Keep running when a fault occurs.
tion or for detecting a broken belt. Fault A 1000 has full self - diagnostic features
Restart
and can restart the application in the event
Better reliability: Keep the application of a fault. Up to 10 restarts possible.
Torque
Limit running while protecting the load.
A1000 helps protect your application by
保護機能 Functions
Protective
restricting the amount of torque the motor
can create.
Momentary Keep running even during a mo-
Freely adjust torque levels with Power Loss mentary loss in power.
Torque Ride-Thru A1000 automatically restarts the motor
Control an external reference signal.
Perfect for tension control in winders and and keeps the application going in the
assisting torque followers. event of a power loss.
Feed Optimizes speed changes when Avoid overvoltage trip.

Overvoltage
Forward working with high-inertia loads. Suppression
Effective for punching presses and crank
Control Estimates the acceleration/deceleration shafts where repetitive motion creates
torque required for the change in speed, large amounts of regenerative energy.
and then recalculates the torque reference. The drive increases or decreases the fre-
quency in correspondence with regen lev-
Automatically optimize ASR set - els to prevent overvoltage from occurring.
Inertia
Tuning
tings for superior responsiveness.*
Optimizes the drive's ability to decelerate Carrier Avoid overload faults for nonstop
the load. Useful for applications using Frequency
Reduction at operations.
KEB and Feed Forward functions. Overload Automatically lowers the carrier frequency
* Available for models less than 450 kW. and raise the overload capacity if the load
increases and the current exceeds the drive s
Automatically switches to line rated output current. This makes it possible
Speed
power. to prevent the occurrence of overload faults.
Search
Switches operation between line power
and inverter drive operation without stop- Monitor actual speed of the mo-
Load Speed
ping the motor. Display
tor and load.
Monitors let the user keep track of motor
No need for extra hardware. rotations and line speed.
Timer Control timing by opening and closing the
Function
output signal relative to the input signal. Save parameter setting to the
Copy
Function
digital operator.
Copy all parameter settings to the opera-
Locks the motor at zero speed. tor keypad, and then transfer those set-
Zero Servo Holds the motor solidly at 0 Hz, regard- tings to another drive. Saves valuable
Control
less of external influences on the load. setup and maintenance time.
Notifies the user when mainte-

Maintenance
Set the carrier frequency to best Monitors nance may be required.
Carrier
match application needs. An output signal is triggered when certain
Frequency
Reduces noise and resonance in the components such as the cooling fan or
both the motor as well as the mechanical capacitors are nearing their expected
system.The Swing PWM feature* can be performance life.
used to minimize audible motor noise.
* Available for models under 450 kW. KEB
Decelerate to stop when the
Function
power goes out.
A 1000 uses regenerative energy from
the motor to bring the application to a
stop, rather than simply letting it coast. 17
Parameter List
Refer to the A1000 Technical Manual for details.
Changes Changes
Function No. Name Range Default Function No. Name Range Default
during Run during Run
A1-00 Language Selection 0 to 12* 4 1* 1 ○ b5-01 PID Function Setting 0 to 8*4 0 ×
Initialization Parameters
A1-01 Access Level Selection 0 to 2 2*2 ○ b5-02 Proportional Gain Setting (P) 0.00 to 25.00 1.00 ○
A1-02 Control Method Selection 0,1,2,3,5,6,7 2*1 × b5-03 Integral Time Setting (I) 0.0 to 360.0 1.0 s ○
A1-03 Initialize Parameters 0 to 5550 0 × b5-04 Integral Limit Setting 0.0 to 100.0 100.0% ○
A1-04 Password 0 to 9999 0 × b5-05 Derivative Time (D) 0.00 to 10.00 0.00 s ○
A1-05 Password Setting 0 to 9999 0 × b5-06 PID Output Limit 0.0 to 100.0 100.0% ○
A1-06 Application Preset 0 to 7 0 × b5-07 PID Offset Adjustment − 100.0 to +100.0 0.0% ○
A1-07 DWEZ Function Selection 0 to 2 0 × b5-08 PID Primary Delay Time Constant 0.00 to 10.00 0.00 s ○
Parameters
A2-01 to A1-00 to b5-09 PID Output Level Selection 0, 1 0 ×

User Parameters, 1 to 32
*2 ×
User
A2-32 o4-13 b5-10 PID Output Gain Setting 0.00 to 25.00 1.00 ○ *4
A2-33 User Parameter Automatic Selection 0, 1 1* 2 × b5-11 PID Output Reverse Selection 0, 1 0 ×
b1-01 Frequency Reference Selection 1 0 to 4 1 × b5-12 PID Feedback Loss Detection Selection 0 to 5 0 ×
b1-02 Run Command Selection 1 0 to 3 1 b5-13 0 to 100 0%
PID Control
× PID Feedback Low Detection Level ×
b1-03 Stopping Method Selection 0 to 3*3 0 × b5-14 PID Feedback Low Detection Time 0.0 to 25.5 1.0 s ×
*
Operation Mode Selection
b1-04 Reverse Operation Selection 0, 1 0 × b5-15 PID Sleep Function Start Level 0.0 to 400.0 3 ×
b1-05 Action Selection below Minimum Output Frequency 0 to 3 0 × b5-16 PID Sleep Delay Time 0.0 to 25.5 0.0 s ×
b1-06 Digital Input Reading 0, 1 1 × b5-17 PID Accel/Decel Time 0 to 6000.0 0.0 s ×
b1-07 LOCAL/REMOTE Run Selection 0, 1 0 × b5-18 PID Setpoint Selection 0, 1 0 ×
b1-08 Run Command Selection while in Programming Mode 0 to 2 0 × b5-19 PID Setpoint Value 0.00 to 100.00 0.00% ○ *4
b1-14 Phase Order Selection 0, 1 0 × b5-20 PID Setpoint Scaling 0 to 3 1 ×
b1-15 Frequency Reference Selection 2 0 to 4 0 × b5-34 PID Output Lower Limit − 100.0 to +100.0 0.0% ○
b1-16 Run Command Selection 2 0 to 3 0 × b5-35 PID Input Limit 0.0 to 1000.0 1000.0% ○
b1-17 Run Command at Power Up 0, 1 0 × b5-36 PID Feedback High Detection Level 0 to 100 100% ×
Start Condition Selection at b5-37 PID Feedback High Detection Time 0.0 to 25.5 1.0 s ×
b1-21*9 0，1 0 ×
Closed Loop Vector Control b5-38 PID Setpoint User Display 1 to 60000 dep. on ×
*3
and Short Circuit Braking
b2-01 DC Injection Braking Start Frequency 0.0 to 10.0 × b5-39 PID Setpoint Display Digits 0 to 3 b5-20 ×
DC Injection Braking
b2-02*4 DC Injection Braking Current 0 to 100 50% × b5-40 Frequency Reference Monitor Content during PID 0, 1 0 ×
b2-03*4 DC Injection Braking Time at Start 0.00 to 10.00 0.00 s × b5-47 Reverse Operation Selection 2 by PID Output 0, 1 1 ×
b2-04*4
* *
Dwell Function
DC Injection Braking Time at Stop 0.00 to 10.00 3 × b6-01 Dwell Reference at Start 0.0 to 400.0 3 ×
b2-08 Magnetic Flux Compensation Capacity 0 to 1000 0% × b6-02 Dwell Time at Start 0.0 to 10.0 0.0 s ×
b2-12
b2-13
Short Circuit Brake Time at Start
Short Circuit Brake Time at Stop
0.00 to 25.50
0.00 to 25.50
0.00 s
0.50 s
×
×
b6-03
b6-04
Dwell Frequency at Stop
Dwell Time at Stop
0.0 to 400.0
0.0 to 10.0
* 3
0.0 s
×
×
b2-18 Short Circuit Braking Current 0.0 to 200.0 100.0% × b7-01 Droop Control Gain 0.0 to 100.0 0.0% ○
Control
Droop
b3-01 Speed Search Selection at Start 0, 1

* 3 × b7-02 Droop Control Delay Time 0.03 to 2.00 0.05 s ○
b3-02 Speed Search Deactivation Current 0 to 200
* 3 × b7-03 Droop Control Limit Selection 0, 1 1 ×
b3-03 Speed Search Deceleration Time 0.1 to 10.0 2.0 s × b8-01 Energy Saving Control Selection 0, 1
* 3 ×
b3-04*4 V/f Gain during Speed Search 10 to 100
* 4 × b8-02 Energy Saving Gain 0.0 to 10.0
* 3 ○
b3-05 Speed Search Delay Time 0.0 to 100.0 0.2 s × b8-03 Energy Saving Control Filter Time Constant 0.00 to 10.00
* 2 ○
Energy Saving
b3-06 Output Current 1 during Speed Search

Output Current 2 during Speed
0.0 to 2.0
* 4
dep. On
×
b8-04 Energy Saving Coefficient Value
0.00 to *4
dep. on ×
b3-07*8 0.0 to 5.0 × 655.00
Search (Speed Estimation Type) C6-01 E2-11
Current Control Gain during Speed dep. On b8-05 Power Detection Filter Time 0 to 2000 20 ms ×
b3-08 0.00 to 6.00 ×
Search (Speed Estimation Type) A1-02 b8-06 Search Operation Voltage Limit 0 to 100 0% ×
b3-10 Speed Search Detection Compensation Gain 1.00 to 1.20 1.05 × b8-16 Energy Saving Parameter (Ki) for PM Motors 0.00 to 3.00*4 1.00 ×
Speed Search
b3-12*8 Minimum Current Detection Level during Speed Search 2.0 to 10.0 6.0 × b8-17 Energy Saving Parameter (Kt) for PM Motors 0.00 to 3.00*4 1.00 ×
b3-14 Bi-Directional Speed Search Selection 0, 1
* 3 × b9-01 Zero Servo Gain 0 to 100 5 ×
Servo
Zero
b3-17 Speed Search Restart Current Level 0 to 200 150% × b9-02 Zero Servo Completion Width 0 to 16383 10 ×
b3-18 Speed Search Restart Detection Time 0.00 to 1.00 0.10 s × C1-01 Acceleration Time 1 0.0 to 6000.0*2 10.0 s ○
Acceleration and Deceleration Times
b3-19 Number of Speed Search Restarts 0 to 10 3 × C1-02 Deceleration Time 1 0.0 to 6000.0*2 10.0 s ○
b3-24 Speed Search Method Selection 0, 1 0 × C1-03 Acceleration Time 2 0.0 to 6000.0*2 10.0 s ○
b3-25 Speed Search Wait Time 0.0 to 30.0 0.5 s × C1-04 Deceleration Time 2 0.0 to 6000.0*2 10.0 s ○
dep. On C1-05 Acceleration Time 3 (Motor 2 Accel Time 1) 0.0 to 6000.0*2 10.0 s ○
C6-01 C1-06 Deceleration Time 3 (Motor 2 Decel Time 1) 0.0 to 6000.0*2 10.0 s ○
b3-26*8 Direction Determining Level 40 to 60000 ×
dep. On C1-07 Acceleration Time 4 (Motor 2 Accel Time 2) 0.0 to 6000.0*2 10.0 s ○
o2-04 C1-08 Deceleration Time 4 (Motor 2 Decel Time 2) 0.0 to 6000.0*2 10.0 s ○
b3-27 Start Speed Search Select 0, 1 0 × C1-09 Fast Stop Time 0.0 to 6000.0*2 10.0 s ○ *4
b3-29*9 Speed Search Induced Voltage Level 0 to 10 10% × C1-10 Accel/Decel Time Setting Units 0, 1 1 ×
b3-33*9
Speed Search Selection when
0，1 0 ×
C1-11 Accel/Decel Time Switching Frequency 0.0 to 400.0
* 3 ×
Driving Instruction is Input in Uv C2-01 S-Curve Characteristic at Accel Start 0.00 to 10.00
* 3 ×
Characteristics
S-Curve
b4-01 Timer Function On-Delay Time 0.0 to 3000.0 0.0 s × C2-02 S-Curve Characteristic at Accel End 0.00 to 10.00 0.20 s ×
b4-02 Timer Function Off-Delay Time 0.0 to 3000.0 0.0 s × C2-03 S-Curve Characteristic at Decel Start 0.00 to 10.00 0.20 s ×
b4-03*9 H2-01 ON Delay Time
Delay Timer
0 to 65536 0 ms × C2-04 S-Curve Characteristic at Decel End 0.00 to 10.00 0.00 s ×

b4-04*9 H2-01 OFF Delay Time 0 to 65536 0 ms × C3-01 Slip Compensation Gain 0.0 to 2.5
* 3 ○
Compensation
b4-05*9 H2-02 ON Delay Time 0 to 65536 0 ms × C3-02 Slip Compensation Primary Delay Time 0 to 10000
* 3 ○
Slip
b4-06*9 H2-02 OFF Delay Time 0 to 65536 0 ms × C3-03 Slip Compensation Limit 0 to 250 200% ×
b4-07*9 H2-03 ON Delay Time 0 to 65536 0 ms × C3-04 Slip Compensation Selection during Regeneration 0 to 2 0 ×
b4-08*9 H2-03 OFF Delay Time 0 to 65536 0 ms × C3-05*4 Output Voltage Limit Operation Selection 0, 1 0 ×
Note: Footnotes are listed on page 23.
18
Changes Changes
C3-16*8 Output Voltage Limit Start (Modulation) 70.0 to 90.0 85.0% × d1-09 Frequency Reference 9 ○
C3-17*8 Output Voltage Limit Max (Modulation) 85.0 to 100.0 90.0% d1-10 Frequency Reference 10
Frequency Reference
× ○
C3-18*8 Output Voltage Limit Level
Slip Compensation
30.0 to 100.0 90.0% × d1-11 Frequency Reference 11 ○

dep. on d1-12 Frequency Reference 12 0.00 to ○
C3-21 Motor 2 Slip Compensation Gain 0.00 to 2.50 ○ 0.00 Hz
E3-01 d1-13 Frequency Reference 13 400.00*2*3 ○
Motor 2 Slip Compensation dep. on d1-14 Frequency Reference 14 ○
C3-22 0 to 10000 ○
Primary Delay Time E3-01 d1-15 Frequency Reference 15 ○
C3-23 Motor 2 Slip Compensation Limit 0 to 250 200% × d1-16 Frequency Reference 16 ○
Parameter List
Motor 2 Slip Compensation d1-17 Jog Frequency Reference 0.00 to 400.00*2*3 6.00 Hz ○
C3-24 0 to 2 0 ×
Frequency Upper/
Selection during Regeneration d2-01 Frequency Reference Upper Limit 0.0 to 110.0 100.0% ×
Lower Limits
*
Torque Compensation
C4-01 Torque Compensation Gain 0.00 to 2.50 3 ○ d2-02 Frequency Reference Lower Limit 0.0 to 110.0 0.0% ×
C4-02 Torque Compensation Primary Delay Time1 0 to 60000
C4-03 Torque Compensation at Forward Start 0.0 to 200.0 0.0%
* *
3 4 ○
×
d2-03
d3-01
Master Speed Reference Lower Limit
Jump Frequency 1
0.0 to 110.0 0.0% ×
×
Frequency
C4-04 Torque Compensation at Reverse Start − 200.0 to 0.0 0.0% × d3-02 Jump Frequency 2 0.0 to 400.0
*3 ×
Jump
C4-05 Torque Compensation Time Constant 0 to 200 10 ms × d3-03 Jump Frequency 3 ×
C4-06 Torque Compensation Primary Delay Time 2 0 to 10000 150 ms
C4-07 Motor 2 Torque Compensation Gain 0.00 to 2.50 1.00
×
○
d3-04
d4-01
Jump Frequency Width
Freq. Ref. Hold Function Selection
0.0 to 20.0
0, 1 0
3
* ×
×
0.00 to d4-03 Freq. Ref. Bias Step (Up/Down 2) 0.00 to 99.99 0.00 Hz ○
*
Frequency Reference Hold

and Up/Down 2 Function
C5-01 ASR Proportional Gain 1 3 ○
300.00*3 d4-04 Freq. Ref. Bias Accel/Decel (Up/Down 2) 0, 1 0 ○
0.000 to Freq. Ref. Bias Operation Mode
C5-02 ASR Integral Time 1
10.000 * 3 ○ d4-05
Selection (Up/Down 2)
0, 1 0 ○
0.00 to d4-06 Freq. Ref. Bias (Up/Down 2) − 99.9 to +100.0 0.0% ×

C5-03 ASR Proportional Gain 2
300.00*3 *3 ○
d4-07
Analog Frequency Reference
0.1 to 100.0 1.0% ○
C5-04
C5-05
ASR Integral Time 2
ASR Limit
0.000 to 10.000
0.0 to 20.0
*3
5.0%
○
×
Fluctuation (Up 2/Down 2)
d4-08 Freq. Ref. Bias Upper Limit (Up/Down 2)
0.0 to 100.0 0.0% ○
C5-06 ASR Primary Delay Time Constant 0.000 to 0.500 3
* × − 99.9 to 0.0 0.0%
d4-09 Freq. Ref. Bias Lower Limit (Up/Down 2) ○
C5-07
C5-08
ASR Gain Switching Frequency
ASR Integral Limit
0.0 to 400.0
0 to 400
3
400%
* ×
×
d4-10
d5-01
Up/Down Freq. Ref. Limit Selection
Torque Control Selection
0, 1
0, 1
0
0
×
×
C5-12 Integral Value during Accel/Decel 0, 1 0 × d5-02 Torque Reference Delay Time 0 to 1000 3
* ×
C5-17 Motor Inertia 0.0001 to 600.00 *2 dep. ×

d5-03 Speed Limit Selection 1, 2 1 ×
Control
Torque
on E5-01 d5-04 Speed Limit − 120 to +120 0% ×

Automatic Speed Regulator (ASR)
C5-18 Load Inertia Ratio 0.0 to 6000.0 1.0 × d5-05 Speed Limit Bias 0 to 120 10% ×
0.00 to dep. on Speed/Torque Control Switchover
C5-21 Motor 2 ASR Proportional Gain 1 ○ d5-06 0 to 1000 0 ms ×
300.00*3 E3-01 Time
0.000 to dep. on d5-08 Unidirectional Speed Limit Bias 0, 1 1 ×
C5-22 Motor 2 ASR Integral Time 1 ○
Frequency and Field Forcing
10.000 E3-01 d6-01 Field Weakening Level 0 to 100 80%

Field Weakening
×
0.00 to dep. on d6-02 Field Weakening Frequency Limit 0.0 to 400.0 0.0 Hz ×
C5-23 Motor 2 ASR Proportional Gain 2 ○
300.00*3 E3-01 d6-03 Field Forcing Selection 0, 1 0 ×
0.000 to dep. on d6-06 Field Forcing Limit 100 to 400 400% ×
C5-24 Motor 2 ASR Integral Time 2 ○
10.000 E3-01 d7-01 Offset Frequency 1 ○
Offset
d7-02 Offset Frequency 2 − 100.0 to +100.0 0.0% ○

C5-25 Motor 2 ASR Limit 0.0 to 20.0 5.0% ×
d7-03 Offset Frequency 3 ○
Motor 2 ASR Primary Delay Time 0.000 to dep. on 200 V
C5-26 × E1-01 Input Voltage Setting 155 to 255 ×
Constant 0.500 E3-01
*5
Motor 2 ASR Gain Switching
C5-27 0.0 to 400.0 0.0 Hz × E1-03 V/f Pattern Selection 0 to F*3 F*1 ×
Frequency
C5-28 Motor 2 ASR Integral Limit 0 to 400 400% × * 2

dep. on
E1-04 Maximum Output Frequency 40.0 to 400.0*3 ×
Integral Operation during Accel/ E5-01 for
C5-32 0, 1 0 ×
Decel for Motor 2 PM motor
C5-37 Motor 2 Inertia
C5-38 Motor 2 Load Inertia Ratio
0.0001 to 600.00
0.0 to 6000.0
*1.02 ×
×
* 2
dep. on
E1-05 Maximum Voltage 0.0 to 255.0*5 ×
V/f Pattern for motor 1
Motor 2 ASR Primary Delay Time E5-01 for

C5-39*9 0.000 to 0.500 0.000 s ×
Constant 2 PM motor
C6-01 Drive Duty Selection 0, 1 0 ×
* 2
C6-02 Carrier Frequency Selection 1 to F*4
*22 ×
E1-06 Base Frequency 0.0 to E1-04*3
dep. on
×
Frequency
C6-03 Carrier Frequency Upper Limit 1.0 to 15.0*4

*2 × E5-01 for
Carrier
C6-04 Carrier Frequency Lower Limit 1.0 to 15.0*4

*2 × PM motor
C6-05 Carrier Frequency Proportional Gain 0 to 99
* × E1-07 Middle Output Frequency 0.0 to E1-04
*22 ×
C6-09*9
Carrier Frequency during
0, 1 0 ×
E1-08 Middle Output Frequency Voltage 0.0 to 255.0*5
* ×
d1-01
Rotational Auto-Tuning
Frequency Reference 1 ○
*2
dep. on
E1-09 Minimum Output Frequency 0.0 to E1-04*5
Frequency Reference
×
d1-02 Frequency Reference 2 ○ E5-01 for
d1-03 Frequency Reference 3 ○ PM motor
d1-04
d1-05
Frequency Reference 4
Frequency Reference 5
0.00 to
400.00*2*3
0.00 Hz
○
○
E1-10 Minimum Output Frequency Voltage 0.0 to 255.0*5
E1-11 Middle Output Frequency 2
2
0.0 to E1-04*2 0.0 Hz
* ×
×
d1-06 Frequency Reference 6 ○ 0.0 to
E1-12 Middle Output Frequency Voltage 2 0.0 V ×
d1-07 Frequency Reference 7 ○ 255.0*2*5
d1-08 Frequency Reference 8 ○ E1-13 Base Voltage 0.0 to 255.0* 0.0 V*
5 2 ×
19
Parameter List (continued)
Changes Changes
10% to 200%
E5-09 Motor Induction Voltage Constant 1 0.0 to 2000.0 * 1
×
E2-01 Motor Rated Current of the drive
*2 × dep. on E5-01
PM Motor
Settings
rated current*2 E5-11 Encoder Z Pulse Offset − 180.0 to +180.0 0.0 deg ×
E2-02 Motor Rated Slip 0.00 to 20.00
*2 ×
E5-24 Motor Induction Voltage Constant 2 0.0 to 6500.0 * 1
dep. on E5-01
×
E2-03 Motor No-Load Current 0 to E2-01*2
*2 ×
E5-25*4 Polarity Switch for Initial Polarity Estimation 0, 1 0 ×
*
Motor 1 Parameters
E2-04 Number of Motor Poles 2 to 48 4 × F1-01 PG 1 Pulses Per Revolution 0 to 60000 3 ×

E2-05 Motor Line-to-Line Resistance 0.000 to 65.000*4
* 2 × F1-02 Operation Selection at PG Open Circuit (PGo) 0, 1 1 ×
E2-06 Motor Leakage Inductance
Motor Iron-Core Saturation
0.0 to 40.0
* 2 × F1-03
F1-04
Operation Selection at Overspeed (oS)
Operation Selection at Deviation
0 to 3
0 to 3
1
3
×
×
E2-07 E2-07 to 0.50 0.50 ×
Coefficient 1 F1-05
F1-06
PG 1 Rotation Selection
PG 1 Division Rate for PG Pulse Monitor
0, 1
1 to 132
*1
3 ×
×
Motor Iron-Core Saturation
E2-08 E2-07 to 0.75 0.75 × F1-08 Overspeed Detection Level 0 to 120 115% ×
PG Speed Control Card (PG-B3/PG-X3/PG-RT3/PG-F3)

Coefficient 2
E2-09 Motor Mechanical Loss 0.0 to 10.0 0.0% ×

F1-09
F1-10
Overspeed Detection Delay Time
Excessive Speed Deviation Detection Level
0.0 to 2.0
0 to 50 10%
* 3 ×
×
Motor Iron Loss for Torque Excessive Speed Deviation
E2-10
Compensation
0 to 65535
* 2 × F1-11
Detection Delay Time
0.0 to 10.0 0.5 s ×
E2-11 Motor Rated Power

E3-01 Motor 2 Control Mode Selection
0.00 to 650.00
0 to 3
*02 ×
×
F1-12
F1-13
PG 1 Gear Teeth 1
PG 1 Gear Teeth 2
0 to 1000
0 to 1000
0
0
×
×
dep. on F1-14 PG Open-Circuit Detection Time 0.0 to 10.0 2.0 s ×
E3-04 Motor 2 Max. Output Frequency 40.0 to 400.0 ×
E3-01 F1-18 dv3 Detection Selection 0 to 10 10 ×
F1-19 dv4 Detection Selection 0 to 5000 128 ×
E3-05 Motor 2 Max. Voltage 0.0 to 255.0*5
* 5 ×
F1-20 PG Option Card Disconnect Detection 1 0, 1 1 ×
dep. on F1-21 PG 1 Signal Selection 0, 1 0 ×
E3-06 Motor 2 Base Frequency 0.0 to E3-04 ×
E3-01 F1-30 PG Card Option Port for Motor 2 Selection 0, 1 1 ×
V/f Pattern for Motor 2
dep. on F1-31 PG 2 Pulses Per Revolution 0 to 60000 600 ppr ×

E3-07 Motor 2 Mid Output Freq. 0.0 to E3-04 ×
E3-01 F1-32 PG 2 Rotation Selection 0, 1 0 ×
E3-08 Motor 2 Mid Output Freq. Voltage 0.0 to 255.0*5 *5

dep. on E3-01
×
F1-33
F1-34
PG 2 Gear Teeth 1
PG 2 Gear Teeth 2
0 to 1000
0 to 1000
0
0
×
×
dep. on F1-35 PG 2 Division Rate for PG Pulse Monitor 1 to 132 1 ×
E3-09 Motor 2 Min. Output Freq. 0.0 to E3-04 ×
E3-01 F1-36 PG Option Card Disconnect Detection 2 0, 1 1 ×
E3-10 Motor 2 Min. Output Freq. Voltage 0.0 to 255.0*5 *5

dep. on E3-01
×
F1-37
F1-50*9
PG 2 Signal Selection
Encoder Selection
0, 1
0 to 2
0
0
×
×
F1-51*9 PGoH Detection Level 1 to 100 80% ×
E3-11 Motor 2 Mid Output Frequency 2 0.0 to E3-04*3 0.0 Hz*2 ×
Communication Speed of Serial
F1-52*9 0 to 3 0 ×
Motor 2 Mid Output Encoder Selection
E3-12 0.0 to 255.0*5 0.0 Hz*2 ×
Frequency Voltage 2 Analog Input Option Card
Digital Input Analog Input
Card (DI-A3) Card (AI-A3)
F2-01 0, 1 0 ×
Operation Selection
E3-13 Motor 2 Base Voltage 0.0 to 255.0*5 0.0 Hz*2 ×
F2-02 Analog Input Option Card Gain − 999.9 to +999.9 100.0% ○
10% to 200% F2-03 Analog Input Option Card Bias − 999.9 to +999.9 0.0% ○
E4-01 Motor 2 Rated Current of the drive
rated current*2
* 2 ×
F3-01
Digital Input Option Card Input
Selection
0 to 7 0 ×
E4-02 Motor 2 Rated Slip 0.00 to 20.00* 2

*22 ×
F3-03
Digital Input Option DI-A3 Data
0 to 2 2 ×
E4-03 Motor 2 Rated No-Load Current 0 to E4-01*2
*4 × Length Selection
Motor 2 Parameters
E4-04 Motor 2 Motor Poles 2 to 48 × F4-01 Terminal V1 Monitor Selection 000 to 999 102 ×
Analog Monitor Card
E4-05 Motor 2 Line-to-Line Resistance 0.000 to 65.000*4

*22 × F4-02 Terminal V1 Monitor Gain − 999.9 to +999.9 100.0% ○
E4-06 Motor 2 Leakage Inductance 0.0 to 40.0
* × F4-03 Terminal V2 Monitor Selection 000 to 999 103 ×
(AO-A3)
Motor 2 Motor Iron-Core F4-04 Terminal V2 Monitor Gain − 999.9 to +999.9 50.0% ○
E4-07 0.00 to 0.50 0.50 ×
Saturation Coefficient 1 F4-05 Terminal V1 Monitor Bias − 999.9 to +999.9 0.0% ○
Motor 2 Motor Iron-Core F4-06 Terminal V2 Monitor Bias − 999.9 to +999.9 0.0% ○
E4-08 E4-07 to 0.75 0.75 ×
Saturation Coefficient 2 F4-07 Terminal V1 Signal Level 0, 1 0 ×
E4-09 Motor 2 Mechanical Loss 0.0 to 10.0 0.0% × F4-08 Terminal V2 Signal Level 0, 1 0 ×
E4-10 Motor 2 Iron Loss 0 to 65535
* 2 F5-01 Terminal P1-PC Output Selection 0 to 192 0
Digital Output Card (DO-A3)
× ×
E4-11 Motor 2 Rated Capacity 0.00 to 650.00
* 2 × F5-02 Terminal P2-PC Output Selection 0 to 192 1 ×
E5-01 Motor Code Selection 0000 to FFFF 1 2
** × F5-03 Terminal P3-PC Output Selection 0 to 192 2 ×
E5-02 Motor Rated Capacity 0.10 to 650.00 * 1

×
F5-04 Terminal P4-PC Output Selection 0 to 192 4 ×
PM Motor Settings
dep. on E5-01 F5-05 Terminal P5-PC Output Selection 0 to 192 6 ×
E5-03 Motor Rated Current

10% to 200%
of the drive dep. on
1
* ×
F5-06
F5-07
Terminal P6-PC Output Selection
Terminal M1-M2 Output Selection
0 to 192
0 to 192
37
F
×
×
rated current*2 E5-01 F5-08 Terminal M3-M4 Output Selection 0 to 192 F ×
E5-04 Number of Motor Poles 2 to 48 *

1
dep. on E5-01
×
F5-09 DO-A3 Output Mode Selection
Communications Error Operation
0 to 2 0 ×
F6-01 0 to 5 1 ×
*
Communication
1 Selection
Option Card
E5-05 Motor Stator Resistance 0.000 to 65.000 ×

dep. on E5-01 External Fault from Comm.
F6-02 0, 1 0 ×
0.00 to
*
1 Option Detection Selection
PM Motor
E5-06 Motor d-Axis Inductance

Settings
×
300.00 dep. on E5-01 External Fault from Comm.
F6-03 0 to 3 1 ×
E5-07 Motor q-Axis Inductance
0.00 to
600.00
*
1
dep. on E5-01
×
F6-04
Option Operation Selection
bUS Error Detection Time 0.0 to 5.0 2.0 s ×
20
Changes Changes
Torque Reference/Torque Limit Multi-Function Analog Input
F6-06 0, 1 0 × H3-16 − 500 ∼ +500 0 ×
Multi-Function
Analog Inputs
Selection from Communications Option Terminal A1 Offset
Multi-Step Speed during NetRef/ Multi-Function Analog Input
F6-07 0,1 0 × H3-17 − 500 ∼ +500 0 ×
ComRef Terminal A2 Offset
F6-08 Reset Communication Parameters 0,1 0* 1 × Multi-Function Analog Input
H3-18 − 500 ∼ +500 0 ×
F6-10 Terminal A3 Offset
to CC-Link Parameter − − × Multi-Function Analog Output
H4-01 000 to 999 102 ×
F6-14 Terminal FM Monitor Selection
Parameter List
F6-20 Multi-Function Analog Output
− 999.9 to +999.9 100.0%
Communication Option Card
H4-02 ○
to MECHATROLINK Parameter − − × Terminal FM Gain
Multifunction Analog Outputs

H4-03 − 999.9 to +999.9 0.0% ○
F6-30 Terminal FM Bias
to PROFIBUS-DP Parameter − − × Multi-Function Analog Output
H4-04 000 to 999 103 ×
F6-32 Terminal AM Monitor Selection
H4-05 − 999.9 to +999.9 50.0% ○
to CANopen Parameter − − × Terminal AM Gain
H4-06 − 999.9 to +999.9 0.0% ○
F6-50 Terminal AM Bias
to DeviceNet Parameters − − × Multi-Function Analog Output
H4-07 0, 1 0 ×
F6-63 Terminal FM Signal Level Selection
H4-08 0, 1 0 ×
to Reserved − − × Terminal AM Signal Level Selection
F6-71 H5-01 Drive Node Address 0 to FFH 1F ×
F7-01 H5-02 Communication Speed Selection 0 to 8 3 ×
to EtherNet Parameter − − × H5-03 Communication Parity Selection 0 to 2 0 ×
MEMOBUS/Modbus Serial Communication
F7-42 Stopping Method After Communi-

H5-04 0 to 3 3 ×
Multi-Function Digital Input cation Error (CE)
H1-01 1 to 9F 40 (F)*6 ×
Terminal S1 Function Selection Communication Fault Detection
H5-05 0, 1 1 ×
Multi-Function Digital Input Selection
H1-02 1 to 9F 41 (F)*6 ×
Terminal S2 Function Selection H5-06 Drive Transmit Wait Time 5 to 65 5 ms ×
Multi-Function Digital Input H5-07 RTS Control Selection 0, 1 1 ×
H1-03 0 to 9F 24 ×
Terminal S3 Function Selection H5-09 CE Detection Time 0.0 to 10.0 2.0 s ×
Multi-Function
Digital Inputs
Multi-Function Digital Input Unit Selection for MEMOBUS/

H1-04 0 to 9F 14 × H5-10 0, 1 0 ×
Terminal S4 Function Selection Modbus Register 0025H
Multi-Function Digital Input Communications ENTER
H1-05 0 to 9F 3 (0)*6 × H5-11 0, 1 0 ×
Terminal S5 Function Selection Function Selection
Multi-Function Digital Input H5-12 Run Command Method Selection 0, 1 0 ×
H1-06 0 to 9F 4 (3)*6 ×
Terminal S6 Function Selection Operation Selection when
H5-17*9 0，1 0 ×
Multi-Function Digital Input Unable to Write into EEPROM
H1-07 0 to 9F 6 (4)*6 ×
Terminal S7 Function Selection Filter Time Constant for Motor
H5-18*9 0 to 100 0 ms ×
Multi-Function Digital Input Speed Monitoring
H1-08 0 to 9F 8 ×
Terminal S8 Function Selection Pulse Train Input Terminal RP
H6-01 0 to 3 0 ×
Terminals M1-M2 Function Function Selection
Pulse Train Input/Output
H2-01 0 to 192 0 ×
Selection (relays) H6-02 Pulse Train Input Scaling 1000 to 32000 1440 Hz ○
Terminal P1-PC Function H6-03 Pulse Train Input Gain 0.0 to 1000.0 100.0% ○
H2-02 0 to 192 1 ×
Selection (photocoupler) − 100.0 to +100.0
Digital Outputs
H6-04 Pulse Train Input Bias 0.0% ○

Multi-Function
Terminal P2-PC Function H6-05 Pulse Train Input Filter Time 0.00 to 2.00 0.10 s ○
H2-03 0 to 192 2 ×
Selection (photocoupler) H6-06 Pulse Train Monitor Selection 000 to 809 102 ○
H2-06 Watt Hour Output Unit Selection 0 to 4 0 × H6-07 Pulse Train Monitor Scaling 0 to 32000 1440 Hz ○
H2-07*9
Memobus Regs1 Address Select 1 to 1FFFH 1 × Pulse Train Input Minimum
H6-08 0.1 to 1000.0 0.5 Hz ×
H2-08*9
Memobus Regs1 Bit Select 0 to FFFFH 0 × Frequency
H2-09*9
Memobus Regs2 Address Select 1 to 1FFFH 1 × Motor Overload Protection
H2-10*9
Memobus Regs2 Bit Select 0 to FFFFH 0 ×
L1-01
Selection
0 to 6
*3 ×
H3-01 Terminal A1 Signal Level Selection 0, 1 0 × L1-02 Motor Overload Protection Time 0.1 to 5.0 1.0 min. ×
H3-02 Terminal A1 Function Selection 0 to 32 0 × Motor Overheat Alarm Operation
L1-03 0 to 3 3 ×
H3-03 Terminal A1 Gain Setting − 999.9 to +999.9 100.0% ○ Selection (PTC input)
Multi-Function
Analog Inputs
H3-04 Terminal A1 Bias Setting − 999.9 to +999.9 0.0% ○ Motor Overheat Fault Operation
L1-04 0 to 2 1 ×
Motor Protection
H3-05 Terminal A3 Signal Level Selection 0, 1 0 × Selection (PTC input)

H3-06 Terminal A3 Function Selection 0 to 32 2 × Motor Temperature Input Filter
L1-05 0.00 to 10.00 0.20 s ×
H3-07 Terminal A3 Gain Setting − 999.9 to +999.9 100.0% ○ Time (PTC input)
H3-08 Terminal A3 Bias Setting − 999.9 to +999.9 0.0% ○ 0.0
H3-09 Terminal A2 Signal Level Selection 0 to 3 2 × 10% to 150%
L1-08*9 OL1 Current Lvl 0.0 A ×
H3-10 Terminal A2 Function Selection 0 to 32 0 × of the drive
Multi-Function
Analog Inputs
H3-11 Terminal A2 Gain Setting − 999.9 to +999.9 100.0% ○ rated current

H3-12 Terminal A2 Bias Setting − 999.9 to +999.9 0.0% ○ 0.0
H3-13 Analog Input Filter Time Constant 0.00 to 2.00 0.03 s × 10％ to 150％
L1-09*9 OL1 Current Lvl (for 2nd motor) 0.0 A ×
Analog Input Terminal Enable of the drive
H3-14 1 to 7 7 ×
Selection rated current
21
Parameter List (continued)
Changes Changes
Continuous Electrothermal L5-01 Number of Auto Restart Attempts 0 to 10 0 ×
Fault Reset
L1-13 0, 1 1 ×
Operation Selection L5-02 Auto Restart Fault Output Operation Selection 0, 1 0 ×
Motor 1 Thermistor Selection L5-04 Fault Reset Interval Time 0.5 to 600.0 10.0 s ×
Motor Protection
L1-15*8 0, 1 0 ×
(NTC) L5-05 Fault Reset Operation Selection 0, 1 0 ×
L1-16*8 Motor 1 Overheat Temperature 50 to 200 120˚C × L6-01 Torque Detection Selection 1 0 to 8 0 ×
Motor 2 Thermistor Selection L6-02 Torque Detection Level 1 0 to 300 150% ×
L1-17*8 0, 1 0 ×
(NTC) L6-03 Torque Detection Time 1 0.0 to 10.0 0.1 s ×
Torque Detection
L1-18*8 Motor 2 Overheat Temperature 50 to 200 120˚C × L6-04 Torque Detection Selection 2 0 to 8 0 ×
L1-19*8 Thermistor Phase Loss Operation 0 to 3 3 × L6-05 Torque Detection Level 2 0 to 300 150% ×
L1-20*8 Motor Overheat Operation 0 to 3 1 × L6-06 Torque Detection Time 2 0.0 to 10.0 0.1 s ×
Momentary Power Loss L6-08 Mechanical Weakening Detection Operation 0 to 8 0 ×
L2-01 0 to 5 0 ×
Operation Selection L6-09 Mechanical Weakening Detection Speed Level − 110.0 to +110.0 110.0% ×
Momentary Power Loss L6-10 Mechanical Weakening Detection Time 0.0 to 10.0 0.1 s ×
L2-02
Ride-Thru Time
0.0 to 25.5
*2 ×
L6-11 Mechanical Weakening Detection Start Time 0 to 65535 0 ×
Momentary Power Loss Minimum L7-01 Forward Torque Limit 0 to 300 200% ×
Momentary Power Loss Ride-Thru
L2-03
Baseblock Time
0.1 to 5.0
*2 ×
L7-02 Reverse Torque Limit 0 to 300 200% ×
Torque Limit
Momentary Power Loss Voltage L7-03 Forward Regenerative Torque Limit 0 to 300 200% ×
L2-04
Recovery Ramp Time
0.0 to 5.0
*2 ×
L7-04 Reverse Regenerative Torque Limit 0 to 300 200% ×
L2-05 Undervoltage Detection Level (Uv) 150 to 210*5

*5
dep. on ×
L7-06 Torque Limit Integral Time Constant 5 to 10000 200 ms
Torque Limit Control Method
×
L7-07 0, 1 0 ×
E1-01 Selection during Accel/Decel
L2-06 KEB Deceleration Time 0.00 to 6000.0*2 0.00 s × L7-16 Torque Limit Delay at Start 0, 1 1 ×
L2-07 KEB Acceleration Time 0.00 to 6000.0*2 0.00 s × Internal Dynamic Braking Resistor
L8-01*9 0, 1 0 ×
L2-08 Frequency Gain at KEB Start 0 to 300 100% × Protection Selection (ERF type)
L2-10 KEB Detection Time 0 to 2000 50 ms × L8-02 Overheat Alarm Level 50 to 130
*32 ×
L2-11 DC Bus Voltage Setpoint during KEB 150 to 400*5

*5
dep. on ×
L8-03
L8-05
Overheat Pre-Alarm Operation Selection
Input Phase Loss Protection Selection
0 to 4
0, 1 0
×
×
E1-01 L8-07 Output Phase Loss Protection 0 to 2 0 ×
L2-29 KEB Method Selection 0 to 3 0 × L8-09 Output Ground Fault Detection Selection 0, 1 1 ×
Stall Prevention Selection during L8-10 Heatsink Cooling Fan Operation Selection 0, 1 0 ×
L3-01 0 to 2 1 ×
Acceleration L8-11 Heatsink Cooling Fan Off Delay Time 0 to 300 60 s ×
Stall Prevention Level during L8-12 Ambient Temperature Setting − 10 to +50 40˚C ×
L3-02
Acceleration
0 to 150*2
* 2 ×
L8-15 oL2 Characteristics Selection at Low Speeds 0, 1 1 ×
Drive Protection
L3-03 Stall Prevention Limit during Acceleration 0 to 100 50% × L8-18 Software Current Limit Selection 0, 1 0 ×
L3-04 Stall Prevention Selection during Deceleration 0 to 5*3*4 1 × L8-19 Frequency Reduction Rate during oH Pre-Alarm 0.1 to 0.9 0.8 ×
L3-05 Stall Prevention Selection during Run 0 to 2 1 × L8-27 Overcurrent Detection Gain 0.0 to 400.0*4 300.0% ×
L3-06 Stall Prevention Level during Run
Overvoltage Suppression
30 to 150*2
*2 × L8-29
L8-32
Current Unbalance Detection (LF2) 0 to 3*4
0 to 4
Magnetic Contactor, Fan Power Supply Fault Selection
1
1
×
×
L3-11 0, 1 0 ×
Function Selection L8-35 Installation Method Selection 0 to 3
**1 2 ×
Target DC Bus Voltage for

375 L8-38 Carrier Frequency Reduction Selection 0 to 2
* 2 ×
L3-17 Overvoltage Suppression and Stall 150 to 400*5

Vdc*5
dep. on
×
L8-40
L8-41
Carrier Frequency Reduction Off DelayTime
High Current Alarm Selection
0.00 to 2.00
0, 1
* 0
3 ×
×
Stall Prevention
Prevention
E1-01 L8-55*9 Internal Braking Transistor Protection 0,1 1 ×
L3-20 DC Bus Voltage Adjustment Gain 0.00 to 5.00 3
* × L8-78*8 Power Unit Output Phase Loss Protection 0, 1 1 ×
L3-21 Accel/Decel Rate Calculation Gain 0.10 to 10.00
Deceleration Time at Stall
3
* × L8-93
L8-94
LSo Detection Time at Low Speed
LSo Detection Level at Low Speed
0. 0 to 10.0
0 to 10
1.0 s
3%
×
×
L3-22 0.0 to 6000.0 0.0 s ×
Prevention during Acceleration L8-95 Average LSo Frequency at Low Speed 1 to 50 10 times ×
Automatic Reduction Selection Carrier Frequency Reduction
L3-23 0, 1 0 × L9-03*9 0，1 0 ×
for Stall Prevention during Run Level Selection
2
* n1-01 Hunting Prevention Selection 0, 1 1 ×
Prevention
Motor Acceleration Time for 0.001 to

Speed Feedback Detection Hunting
L3-24 dep. on E2-11 × n1-02 Hunting Prevention Gain Setting 0.00 to 2.50 1.00 ×
Inertia Calculations 10.000
L3-25 Load Inertia Ratio 0.0 to 1000.0 1.0

dep. on E5-01
×
n1-03
n1-05
Hunting Prevention Time Constant
Hunting Prevention Gain while in Reverse 0.00 to 2.50
0 to 500
* 4
0.00
×
×
L3-26 Additional DC Bus Capacitors 0 to 65000 0 μ F × Speed Feedback Detection
n2-01 0.00 to 10.00 1.00 ×
Control (ASR) Tuning
L3-27 Stall Prevention Detection Time 0 to 5000 50 ms × Control (AFR) Gain

dep. On Speed Feedback Detection
L3-34*9 Torque Limit Delay Time 0.000 to 1.000 × n2-02 0 to 2000 50 ms ×
A1-02 Control (AFR) Time Constant 1
Speed Agree Width at Intelligent Speed Feedback Detection
L3-35*9 0.00 to 1.00 0.00 Hz × n2-03 0 to 2000 750 ms ×
Stall Prevention during Deceleration Control (AFR) Time Constant 2
L4-01 Speed Agreement Detection Level 0.0 to 400.0 3
* ×
n3-01
High-Slip Braking Deceleration
1 to 20 5% ×
L4-02 Speed Agreement Detection Width 0.0 to 20.0 3
* × Frequency Width
Overexcitation Braking
High Slip Braking and
L4-03 Speed Agreement Detection Level (+/ − ) − 400.0 to +400.0 3

* × n3-02 High-Slip Braking Current Limit 100 to 200 2
* ×
Speed Detection
L4-04 Speed Agreement Detection Width (+/ − ) 0.0 to 20.0

Frequency Reference Loss
3
* × n3-03
n3-04
High-Slip Braking Dwell Time at Stop 0.0 to 10.0
High-Slip Braking Overload Time 30 to 1200
1.0 s
40 s
×
×
L4-05 0, 1 0 ×
Detection Selection n3-13 Overexcitation Deceleration Gain 1.00 to 1.40 1.10 ×
Frequency Reference at High Frequency Injection during
L4-06 0.0 to 100.0 80.0% × n3-14 0, 1 0 ×
Reference Loss Overexcitation Deceleration
Speed Agreement Detection n3-21 High-Slip Suppression Current Level 0 to 150 100% ×
L4-07 0, 1 0 ×
Selection n3-23 Overexcitation Operation Selection 0 to 2 0 ×

22
Changes Changes
Feed Forward
Parameters Monitor Settings

n5-01 Feed Forward Control Selection 0, 1 0 × o4-09 IGBT Maintenance Setting 0 to 150 0% ×
Maintenance
*
Control
0.001 to 2 o4-11 U2, U3 Initialize Selection 0, 1 0 ×

n5-02 Motor Acceleration Time ×
10.000 dep. on E5-01 o4-12 kWh Monitor Initialization 0, 1 0 ×
n5-03 Feed Forward Control Gain 0.00 to 100.00 1.00 × o4-13 Number of Run Commands Counter Initialization 0, 1 0 ×
q1-01
n6-01 Online Tuning Selection 0 to 2 0 ×
DWEZ
Tuning
− −
Online
to DWEZ Parameters ×
q6-07
n6-05 Online Tuning Gain 0.1 to 50.0 1.0 ×
DWEZ Connection
Parameter List
n8-01 Initial Rotor Position Estimation Current 0 to 100 50%
Parameters
×
r1-01
n8-02 Pole Attraction Current 0 to 150 80% × DWEZ Connection Parameter 1
to 0 to FFFFH 0 ×
dep. on to 20 (upper/lower)
n8-11*9 Induction Voltage Estimation Gain 2 0.0 to 1000.0 × r1-40
n8-72
n8-14*9 Polarity Compensation Gain 3 0.000 to 10.000 1.000 ×
n8-15*9 Polarity Compensation Gain 4 0.000 to 10.000 0.500 × T1-00 Motor 1 / Motor 2 Selection 1, 2 1 ×
n8-21*9 Motor Ke Gain 0.80 to 1.00 0.90 × T1-01 Auto-Tuning Mode Selection 0 to 5, 8, 9*3*4 0 ×
n8-35
n8-36*9
Initial Rotor Position Detection Selection
High Frequency Injection Level
0 to 2
200 to 1000
1
500 Hz
×
×
T1-02 Motor Rated Power 0.00 to 650.00
* 4 ×
200.0
T1-03 Motor Rated Voltage 0.0 to 255.0*5 ×
n8-37*9 Vac*5
Induction Motor Auto-Tuning

High Frequency Injection Amplitude 0.0 to 50.0 20.0% ×
PM Motor Control Tuning
Low Pass Filter Cutoff Frequency 10% to 200%

n8-39*9 0 to 1000 50 Hz ×
n8-45
for High Frequency Injection
Speed Feedback Detection Control Gain 0.00 to 10.00 0.80 ×
T1-04 Motor Rated Current of the drive
rated current
*4 ×
n8-47 Pull-In Current Compensation Time Constant 0.0 to 100.0 5.0 s × T1-05 Motor Base Frequency 0.0 to 400.0 60.0 Hz ×
n8-48 Pull-In Current 20 to 200 30% × T1-06 Number of Motor Poles 2 to 48 4 ×
d-Axis Current for High Efficiency dep. on T1-07 Motor Base Speed 0 to 24000 1750 r/min ×
n8-49 − 200.0 to 0.0 ×
Control E5-01 T1-08 PG Number of Pulses Per Revolution 0 to 60000 600 ppr ×
n8-51 Acceleration/Deceleration Pull-In Current 0 to 200 50% × Motor No-Load Current
T1-09 0 to T1-04 − −
n8-54 Voltage Error Compensation Time Constant 0.00 to 10.00 1.00 s × (Stationary Auto-Tuning)
n8-55 Load Inertia 0 to 3 0 × Motor Rated Slip
T1-10 0.00 to 20.00 − −
n8-57 High Frequency Injection 0, 1 0 × (Stationary Auto-Tuning)
200.0 T1-11 Motor Iron Loss 0 to 65535 14 W*2 ×
n8-62 Output Voltage Limit 0.0 to 230.0*5 ×
Vac*5 PM Motor Auto-Tuning Mode 0 to 3, 8, 9,
T2-01 0 ×
Speed Feedback Detection Control Selection 11, 13, 14*3*4
n8-65 0.00 to 10.00 1.50 ×
n8-69
Gain during ov Suppression
Speed Calculation Gain 0.00 to 20.00 1.00 ×
T2-02
T2-03
PM Motor Code Selection
PM Motor Type
0000 to FFFF
0,1 1
2
* ×
×
n8-72*9
n8-84
Speed Estimation Method Selection
Pole Detection Current
0，1
0 to 150 100%
1 ×
×
T2-04 PM Motor Rated Power 0.00 to 650.00 4
* ×
200.0
T2-05 PM Motor Rated Voltage 0.0 to 255.0*5 ×
o1-01 Drive Mode Unit Monitor Selection 104 to 809 106 ○ Vac*5
Display Selection
Digital Operator
o1-02 User Monitor Selection After Power Up 1 to 5 1 ○ 10% to 200%

o1-03 Digital Operator Display Selection 0 to 3
* 3 × T2-06 PM Motor Rated Current of the drive
*4 ×
o1-04 V/f Pattern Display Unit 0, 1
* 3 × rated current
PM Motor Auto-Tuning
o1-05*9 LCD Contrast Control 0 to 5 3 ○ T2-07 PM Motor Base Frequency 0.0 to 400.0 87.5 Hz ×
o1-10 User-Set Display Units Maximum Value 1 to 60000
* 2 × T2-08 Number of PM Motor Poles 2 to 48 6 ×
o1-11
o2-01
User-Set Display Units Decimal Display
LO/RE Key Function Selection
0 to 3
0, 1
*
1
2 × T2-09 PM Motor Base Speed 0 to 24000 1750 r/min
0.000 to
×
Digital Operator Keypad Functions
×
o2-02 STOP Key Function Selection 0, 1 1 ×
T2-10 PM Motor Stator Resistance
65.000
7
* ×
o2-03 User Parameter Default Value 0 to 2 0 × T2-11 PM Motor d-Axis Inductance 0.00 to 600.00 7
* ×
o2-04 Drive Model Selection –

dep. on drive
capacity
×
T2-12
T2-13
PM Motor q-Axis Inductance
Induced Voltage Constant Unit Selection
0.00 to 600.00
0,1 1
7
* ×
×
Frequency Reference Setting PM Motor Induced Voltage
o2-05
Method Selection
0, 1 0 × T2-14
Constant
0.1 to 2000.0 7
* ×
o2-06 Operation Selection when Digital Operator is Disconnected 0, 1 0 × Pull-In Current Level for PM
T2-15 0 to 120 30% −
Motor Direction at Power Up Motor Tuning
o2-07 0, 1 0 ×
when Using Operator PG Number of Pulses Per
T2-16 0 to 15000 1024 ppr −
o2-09 Reserved – – × Revolution for PM Motor Tuning
− 180.0 to
Monitor Settings Function
o3-01 Copy Function Selection 0 to 3 0 × 0.0

Copy
T2-17 Encoder Z Pulse Offset ×

o3-02 Copy Allowed Selection 0, 1 0 × +180.0 deg
ASR and Inertia
o4-01 Cumulative Operation Time Setting 0 to 9999 0 × T3-01 Test Signal Frequency 0.1 to 20.0 3.0 Hz ×
Maintenance
o4-02 Cumulative Operation Time Selection 0, 1 0 × T3-02 Test Signal Amplitude 0.1 to 10.0 0.5 rad ×
Tuning
o4-03
o4-05
Cooling Fan Operation Time Setting
Capacitor Maintenance Setting
0 to 9999
0 to 150 0%
0 ×
×
T3-03 Motor Inertia
0.0001 to
600.00
2
dep. on E5-01
* ×
o4-07 DC Bus Pre-charge Relay Maintenance Setting 0 to 150 0% × T3-04 System Response Frequency 0.1 to 50.0 10.0 Hz ×
*12:: Parameter is not reset to the default value when the drive is initialized (A1-03).
*5: Value shown here is for 200 V class drives. Double the value when using a
* Value depends on other related parameter settings. Refer to A1000 Techni- 400 V class drive.
cal Manual for details.
*67:: Value in parenthesis is the default setting for a 3-wire sequence.
*3: Default setting depends on the control mode (A1-02). Refer to A1000 Tech-
nical Manual for details.
* Sets the value for a SST4 series 1750 r/min motor according to the capaci-
ty entered to T2-02.
*4: Default setting depends on drive capacity (o2-04). Refer to A1000 Techni-
*89:: This
This parameter is available in models CIMR-A 4A0930 and 4A1200.
cal Manual for details.
* parameter is not available in models CIMR-A 4A0930 and 4A1200.
23
Basic Instructions
Outstanding operability and quick setup

Operator Names and Functions
LED panel
More information listed below.
Up arrow key
Scrolls up through the display
screen, and increases a Data display (5-digit)
selected value. Displays frequency, parameter
number, and other data.
ESC key
Lets the user back up to the LO/RE light
previous display screen. Lights to indicate that the
operator is set for LOCAL.
Right arrow key
Scrolls the cursor to the right. LO/RE key
Determines where the Run
RESET key
Resets a fault. command and frequency reference
come from: the keypad (LOCAL) or
the control terminals (REMOTE).
Glossary
Used as a quick guide for the ENTER key
abbreviations used on the Press to enter values, edit param-
display screen. Details listed on eters, and set the control mode.
the next page. Press this key to proceed to the
next screen when scrolling
through various menu displays.
Down arrow key
Scrolls down through the STOP key
display screen, and decreases Issues a Stop command.
a selected value.
Com port
For connecting to a PC (DriveWizard
RUN key
Issues a Run command. or DriveWorksEZ), a USB copy unit or
a LCD operator.
Lights during communica-
tions
LED Display Guide

LED ON Flashing OFF
Alarm situation detected.

ALM A fault has occurred. Normal operation
Operator error (OPE)
REV Motor is rotating in reverse. Motor is rotating forward.
DRV In the Drive Mode Programming Mode
FOUT Output frequency

Run command assigned Control assigned to
to the operator (LOCAL) remote location
During deceleration
During run Drive is stopped.
Run command is present but the frequency reference is zero.
How the RUN light works:

Drive output frequency
Run command
Frequency reference
RUN light OFF ON Flashing OFF Flashing
24
Operation Example
Drive Mode: Run and Stop commands, displays operation status such as the frequency
Using the LED Operator to Run the Drive reference, output frequency, output current, output voltage, etc.
How to Monitor the Frequency Reference
Steps Key Result/Display Steps Key Result/Display
1 Turn the power on. Use the arrow keys to

select the digits to set.
Basic Instructions
2 Set the drive for LOCAL. LO Should
light
The frequency reference is displayed.
Increase or decrease End appears while the
the value displayed. drive saves the new data.
Press enter to save
3 Displays the direction the new value.
DRV DRV lights up.
(forward/reverse).
Monitor Mode: Displays operation status and information on faults.
4 Displays the output
Steps Key Result/Display
frequency.
Select a monitor.
current. Displays U1-01, the
frequency reference
monitor.
voltage.
Select another monitor.
7 Displays the beginning of flashing
the Monitor Menu.
8 Displays the top of the flashing Back up to the top of Press

Verify Menu. the Monitor Menu. once.
Verify Menu: Lists all parameters that have been changed

9 Displays the top of the flashing
from their original default settings, either by
Setup Mode.
the user or from Auto -Tuning.
10 Displays the top of the Steps Key Result/Display
parameter settings menu.
Lists parameters that have
11 Displays the top of the been changed in order.
Auto-Tuning Mode. Pressing Enter displays
the parameter value.
Returns back to the
Parameters that have been
frequency reference display. changed from their default
values are listed in order.
Value will flash when it is possible to change the setting.
Returns to the top of

Press
the Verify Menu once.
Press to go back to the previous display screen
Setup Mode
The list of Applications Presets can be accessed in the Setup Mode. Each Conveyor Application Presets
Application Preset automatically programs drive parameters to their optimal No. Parameter Name Optimum Setting
settings specific to the application selected. All parameters affected by the
A1-02 Control Method Selection 0: V/f Control
Application Preset are then listed as Preferred Parameters for quick access.
C1-01 Acceleration Time 1 3.0 (s)
Selecting a Conveyor (A1-06=1) C1-02 Deceleration Time 1 3.0 (s)
Steps Key Result/Display C6-01 Duty Mode Selection 0: Heavy Duty (HD)
L3-04 Stall Prevention Selection during Deceleration 1: Enabled
Application Selection
Select, Conveyor .
Preferred Parameters
End appears while the
drive saves the new data. No. Parameter Name No. Parameter Name
All parameters relating to the
preset values for a Conveyor A1-02 Control Method Selection C1-02 Deceleration Time 1
application are then listed as b1-01 Frequency Reference Selection 1 E2-01 Motor Rated Current
Preferred Parameters. Scroll to the Preferred
Parameter using the up arrow b1-02 Run Command Selection 1 L3-04 Stall Prevention Selection during Deceleration
key and see which parameters
have been selected. C1-01 Acceleration Time 1 – –
25
Standard Specifications
Parameter C6-01 sets the drive for Normal Duty or Heavy Duty performance (default).
200 V Class ND : Normal Duty, HD : Heavy Duty
Model CIMR-A 2A 0004 0006 0008*7
0010 0012 0018*7 0021 0030 0040 0056 0069 0081 0110 0138 0169 0211 0250 0312 0360 0415
Max. Applicable ND 0.75 1. 1 1.5
2.2 3 3.7 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 110 110
Motor Capacity*1 kW HD 0. 4 0.75 1.1
1.5 2.2 3 3.7 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 110
Input
Rated Input ND 3.9 7.3 8.8

10.8 13.9 18.5 24 37 52 68 80 92 111 136 164 200 271 324 394 394
Current*2 A HD 2.9 5.8 7
7.5 11 15.6 18.9 28 37 52 68 80 82 111 136 164 200 271 324 394
Rated Output ND*4 1.3 2.3 3
3.7 4.6 6.7 8 11.4 15.2 21 26 31 42 53 64 80 95 119 137 158
Capacity*3 kVA HD 1.2*5 1.9*5 2.6*5
3*5 4.2*5 5.3*5 6.7*5 9.5*5 12.6*5 17.9*5 23*5 29*5 32*5 44*5 55*6 69*6 82*6 108*6 132*6 158*6
Rated Output ND*4 3.5 6 8
9.6 12 17.5 21 30 40 56 69 81 110 138 169 211 250 312 360 415
Current A HD 3.2*5 5*5 6.9*5
8*5 11*5 14*5 17.5*5 25*5 33*5 47*5 60*5 75*5 85*5 115*5 145*6 180*6 215*6 283*6 346*6 415*6
Output
Overload Toler- ND Rating*8: 120% of rated output current for 60 s, HD Rating*8: 150% of rated output current for 60 s
ance (Derating may be required for repetitive loads)
Carrier Frequency 1 to 15 kHz*8 1 to 10 kHz*8
Max. Output Voltage Three-phase 200 to 240 V (relative to input voltage)
Max. Output Frequency 400 Hz*8
Rated Voltage/Rated Frequency Three-phase AC power supply: 200 to 240 Vac 50/60 Hz, DC power supply: 270 to 340 Vdc*9
Allowable Voltage Fluctuation − 15% to +10%
Power
Allowable Frequency Fluctuation ± 5%

Power Supply*10 ND 1.8 3.3 4.0 4.9 6.4 8.5 11 17 24 31 37 42 51 62 75 91 124 148 180 215
kVA HD 1.3 2.7 3.2 3.4 5.0 7.1 8.6 13 17 24 31 37 37 51 62 75 91 124 148 180
Harmonic Suppression DC Reactor Option Built-in
Braking Function Braking Transistor Built-in Option
*1: the
The motor capacity (kW) refers to a Yaskawa 4-pole, 60 Hz, 200 V motor. The rated output current of the drive output amps should be equal to or greater than
motor rated current.
*2: value
Value displayed is for the input current when operating Yaskawa standard motors of max. applicable capacity with the rated load at the rated motor speed. This
may fluctuate based on the power supply side impedance, as well as the input current, power supply transformer, input side reactor, and wiring conditions.
*34:: Rated output capacity is calculated with a rated output voltage of 220 V.
*5: This value assumes a carrier frequency of 8 kHz. Increasing the carrier frequency requires a reduction in current.
This value assumes a carrier frequency of 2 kHz. Increasing the carrier frequency requires a reduction in current.
*7: These models are available in Japan only.
*8: Carrier frequency can be set by the user.
*9: Not compliant with the UL standards when using a DC power supply. To meet CE standards, fuses should be installed. For details, refer to page 43.
*10: Rated input capacity is calculated with a power line voltage of 240 V × 1.1.
*
Model CIMR-A 4A 0002 0004 0005 0007
0009 0011 0018 0023 0031 0038 0044 0058 0072 0088 0103 0139 0165 0208 0250 0296 0362 0414 0515 0675 0930 1200
Max. Applicable ND 0.75 1. 5 2.2 3
3.7 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 110 132 160 185 220 250 355 500 630
Motor Capacity*1 kW HD 0.4 0.75 1.5 2.2
3 3.7 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 110 132 160 185 220 315 450 560
Input
Rated Input ND 2.1 4.3 5.9 8.1

9.4 14 20 24 38 44 52 58 71 86 105 142 170 207 248 300 346 410 465 657 922 1158
Current*2 A HD 1.8 3.2 4.4 6
8.2 10.4 15 20 29 39 44 43 58 71 86 105 142 170 207 248 300 346 410 584 830 1031
Rated Output ND*4 1.6 3.1 4.1 5.3
6.7 8.5 13.3 17.5 24 29 34 44 55 67 78 106 126 159 191 226 276 316 392 514 709 915
Capacity*3 kVA HD 1.4*5 2.6*5 3.7*5 4.2*5
5.5*5 7*5 11.3*5 13.7*5 18.3*5 24*5 30*5 34*5 46*5 57*5 69*5 85*6 114*6 137*6 165*6 198*6 232*6 282*6 343*4 461*4 617*4 831*4
Rated Output ND*4 2.1 4.1 5. 4 6.9
8.8 11.1 17.5 23 31 38 44 58 72 88 103 139 165 208 250 296 362 414 515 675 930 1200
Current A HD 1.8*5 3.4*5 4.8*5 5.5*5
7.2*5 9.2*5 14.8*5 18*5 24*5 31*5 39*5 45*5 60*5 75*5 91*5 112*6 150*6 180*6 216*6 260*6 304*6 370*6 450*4 605*4 810*4 1090*4
Output
Overload Toler- ND Rating*7: 120% of rated output current for 60 s, HD Rating*7: 150% of rated output current for 60 s
ance (Derating may be required for repetitive loads)
Carrier Frequency 1 to 15 kHz*7 1 to 10 kHz*7 1 to 5 kHz*7
Max. Output Voltage Three-phase 380 to 480 V (relative to input voltage) Input voltage × 0.95
Max. Output Frequency 400 Hz*7
Rated Voltage/Rated Frequency Three-phase AC power supply: 380 to 480 Vac 50/60 Hz, DC power supply: 510 to 680 Vdc*8
Allowable Voltage Fluctuation − 15% to +10%
Power
Allowable Frequency Fluctuation ± 5%

Power Supply*9 ND 1.9 3.9 5.4 7.4 8.6 12.8 18.3 22 35 40 48 53 65 79 96 130 155 189 227 274 316 375 425 601 843 1059
kVA HD 1.6 2.9 4.0 5.5 7.5 10 13.7 18.3 27 36 40 39 53 65 79 96 130 155 189 227 274 316 375 534 759 943
Harmonic Suppression DC Reactor Option Built-in
Braking Function Braking Transistor Built-in Option
*1: the
The motor capacity (kW) refers to a Yaskawa 4-pole, 60 Hz, 400 V motor. The rated output current of the drive output amps should be equal to or greater than
motor rated current.
*2 Value
: displayed is for the input current when operating Yaskawa standard motors of max. applicable capacity with the rated load at the rated motor speed. This
value may fluctuate based on the power supply side impedance, as well as the input current, power supply transformer, input side reactor, and wiring conditions.
3: Rated output capacity is calculated with a rated output voltage of 440 V.
*7: Carrier frequency can be set by the user.
*8: Not compliant with the UL standards when using a DC power supply. To meet CE standards, fuses should be installed. For details, refer to page 43.
*9: Rated input capacity is calculated with a power line voltage of 480 V × 1.1.
26 *
Common Specifications
Item Specifications
V/f Control, V/f Control with PG, Open Loop Vector Control, Closed Loop Vector Control, Open Loop Vector
Control Method
Control for PM, Advanced Open Loop Vector Control for PM, Closed Loop Vector Control for PM
Frequency Control Range 0.01 to 400 Hz
Frequency Accuracy Digital reference: within ± 0.01% of the max. output frequency ( − 10 to ＋ 40˚C)
(Temperature Fluctuation) Analog reference: within ± 0.1% of the max. output frequency (25 ± 10˚C)
Frequency Setting Resolution Digital reference: 0.01 Hz, Analog reference: 0.03 Hz / 60 Hz (11 bit)
Output Frequency Resolution 0.001 Hz
Main frequency reference: − 10 to +10 Vdc, 0 to 10 Vdc (20 k Ω ), 4 to 20 mA (250 Ω ), 0 to 20 mA (250 Ω )
Frequency Setting Resolution
Main speed reference: Pulse train input (max. 32 kHz)
V/f Control 150%/3 Hz V/f Control with PG 150%/3 Hz
Open Loop Vector Control 200%/0.3 Hz*1 Closed Loop Vector Control 200%/0 min–1*1
Starting Torque
Open Loop Vector Control for PM 100%/5% speed Advanced Open Loop Vector Control for PM 200%/0 min–1*1, *2, *3
Standard Specifications
Closed Loop Vector Control for PM 200%/0 min–1*1
Control Characteristics
V/f Control 1:40 V/f Control with PG 1:40

Open Loop Vector Control 1:200 Closed Loop Vector Control 1:1500
Speed Control Range
Open Loop Vector Control for PM 1:20 Advanced Open Loop Vector Control for PM 1:100*2, *3, *4
Closed Loop Vector Control for PM 1:1500
Speed Control Accuracy*5 ± 0.2% in Open Loop Vector Control (25 ± 10˚C), ± 0.02% in Closed Loop Vector Control (25 ± 10˚C)
10 Hz in Open Loop Vector Control (25 ± 10˚C), 50 Hz in Closed Loop Vector Control (25 ± 10˚C) (excludes
Speed Response
temperature fluctuation when performing Rotational Auto-Tuning)
Torque Limit All vector control modes allow separate settings in four quadrants
Accel/Decel Time 0.00 to 6000.0 s (4 selectable combinations of independent acceleration and deceleration settings)
1 Short-time decel torque*7 : over 100% for 0.4/ 0.75 kW motors, over 50% for 1.5 kW motors, and over 20% for 2.2
Braking Torque*6 kW and above motors (Overexcitation Deceleration, High Slip Braking: approx. 40%)
2 Continuous regen. torque: approx. 20% (approx. 125% with dynamic braking resistor option*8: 10% ED,10 s)
V/f Characteristics User-selected programs and V/f preset patterns possible

Torque Control, Droop Control, Speed/Torque Control switch, Feed Forward Control, Zero Servo Control, Momen-
tary Power Loss Ride-Thru, Speed Search, Overtorque detection, torque limit, 17 Step Speed (max.), accel/decel
time switch, S-curve accel/decel, 3-wire sequence, Auto-Tuning (rotational, stationary), Online Tuning, Dwell, cool-
Main Control Functions ing fan on/off switch, slip compensation, torque compensation, Frequency Jump, Upper/lower limits for frequency
reference, DC Injection Braking at start and stop, Overexcitation Deceleration, High Slip Braking, PID control (with
Sleep function), Energy Saving Control, MEMOBUS comm. (RS-485/422, max. 115.2 kbps), Fault Restart, Appli-
cation Presets, DriveWorksEZ (customized functions), Removable Terminal Block with Parameter Backup...
Motor Protection Motor overheat protection based on output current
Stops over 200% rated output current (Heavy Duty)
Momentary Overcurrent Protection
Drive stops after 60 s at 150% of rated output current (when set for Heavy Duty performance)*9
Overload Protection
Protection Function
200 V class: Stops when DC bus exceeds approx. 410 V, 400 V class: Stops when DC bus exceeds approx. 820 V
Overvoltage Protection
200 V class: Stops when DC bus exceeds approx. 190 V, 400 V class: Stops when DC bus exceeds approx. 380 V
Undervoltage Protection (approx. 350 V when the power supply voltage is less than 400 V)
Momentary Power Loss Ride-Thru Stops immediately after 15 ms or longer power loss (default). Continuous operation during power up to 2 s (standard).*10
Heatsink Overheat Protection Thermistor
Braking Resistance Overheat Protection Overheat sensor for braking resistor (optional ERF-type, 3% ED)
Stall Prevention Stall prevention during acceleration/deceleration and constant speed operation
Ground Fault Protection Protection by electronic circuit *11
Charge LED Charge LED remains lit until DC bus has fallen below approx. 50 V
Area of Use Indoors
Ambient Temperature − 10 to +50˚C (open-chassis), − 10 to +40˚C (enclosure)
Environment
Humidity 95% RH or less (no condensation)

Storage Temperature − 20 to +60˚C (short-term temperature during transportation)
Altitude Up to 1000 meters (derating required at altitudes from 1000 m to 3000 m)
10 Hz to 20 Hz, 9.8 m/s2 max.〔5.9 m/s2 for models larger than 400 V 450 kW (when set for Heavy Duty performance)〕
Shock 20 Hz to 55 Hz, 5.9 m/s2〔200 V: 45 kW or more, 400 V: 75 kW or more (when set for Heavy Duty performance)〕or
2.0 m/s2 max.〔200 V: 55 kW or less, 400 V: 90 kW or less (when set for Heavy Duty performance)〕
Standards Compliance ・UL508C ・IEC/EN61800-3，IEC/EN61800-5-1 ・Two Safe Disable inputs and 1EDM output according to ISO/EN13849-1 Cat.3 PLd, IEC/EN61508 SIL2
Protection Design IP00 open-chassis, UL Type 1 enclosure *12
*12:: Requires a drive with recommended capacity. 200 V 30 kW or less (CIMR-A □ 2A0004 to 2A0138) 400 V 30 kW or less (CIMR-A □ 4A0002 to 4A0072)
*3: Valid when high frequency injection is enabled (n8-57=1). Drives of 200/400 V 30 kW (CIMR-A □ 2A0138/A □ 4A0072) or less have a built-in braking transistor.
* Rotational Auto-Tuning must be performed to achieve the performance
described with Advanced Open Loop Vector Control for PM.
*9: output
Overload protection may be triggered when operating with 150% of the rated
current if the output frequency is less than 6 Hz.
* series motors manufactured by Yaskawa Motor Co., Ltd. * smaller than 11 kW in the 200 V (model: CIMR- A□2A0056) or 400 V (model:
4: Contact your Yaskawa or nearest agent when not using SSR1 series or SST4 10: Varies in accordance with drive capacity and load. Drives with a capacity of
*6: Varies by motor characteristics.

5: Speed control accuracy may vary slightly depending on installation conditions or motor used. CIMR- A □ 4A0031) require a separate Momentary Power Loss Recovery Unit
*7: Momentary average deceleration torque refers to the deceleration torque *11: Protection is provided when the motor is grounded during Run. Protection
to continue operating during a momentary power loss of 2 s or longer.
* from 60 Hz down to 0 Hz. This may vary depending on the motor. may not be provided under the following conditions:
* braking resistor, or a braking resistor unit. If the function is enabled under

8: Set L3-04 to 0 or 3 to disable stall prevention when using a braking unit, a Low resistance to ground from the motor cable or terminal block.
Drive already has a short-circuit when the power is turned on.
The following models come with a built-in braking transistor:

*
these conditions, the drive may not stop within the specified deceleration time. 12: Removing the cover of changes the drive s UL Type 1 rating to IP20 (models
2A0004 to 2A0081 and 4A0002 to 4A0044).
27
Standard Connection Diagram

Example: 200 V Class 3.7 kW
Terminals −, +1, +2, B1, B2 are for DC reactor
*FU4
Thermal relay
*
connection options. Never connect (option) 1 r1
trip contact FV
power supply lines to these terminals U X Braking resistor s1 M
Jumper (option) FW
Cooling fan
**2 3 t1
Wiring sequence should shut off power to
2MCCB
the drive when a fault output is triggered. r1 +2 +1 − B1 B2
s1 U
t1 Main Circuit U/T1
ELCB or MCCB V/T2 V
Three-phase R MC Fuse M
power supply S
R/L1
S/L2 Drive W/T3 W
200 to 240 V T/L3

T
50/60 Hz Control Circuit Ground
The voltage rating of devices Forward run / Stop S1 PG-B3 TB1
used for a sequence circuit is Reverse run / Stop S2

*
5 A+
A−
usually 200 V. B+ PG
A separate transformer is External fault S3 B−
Z+
required when running from Z−
Fault reset S4
a 400 V power supply to step
SD
the voltage down to 200 V. Multi-speed step 1 S5 FE
MC MB 2MCCB THRX OFF ON MC Multi-speed step 2 S6 TB2

IP
MC SA Jog speed S7 IG
Braking resistor unit
Thermal relay trip contact THRX AO
External baseblock S8 A track monitor
1 2 Multi-function IG
SA digital inputs Sink / Source mode BO B track monitor
TRX (default setting) selection jumper S3 IG
ZO
MC MA
TRX
SA
SC
*
(default: Sink) 6
CN5-C
IG
Option
+24 V board CN5-B Fault relay output
Fault relay contact MA
connectors 250 Vac, max. 1 A
CN5-A MB 30 Vdc, max. 1 A
Shield ground terminal MC (min. 5 Vdc, 10 mA)
Pulse train input
RP Pulse train input (max 32 kHz)
Multi-function relay output
3
0 to 10 V
*7 +V Power supply +10.5 Vdc, max. 20 mA
Analog input 1
M1
M2
(During run)
250 Vac, max. 1 A
2 kΩ A1 (Frequency reference bias) DIP Switch S1 30 Vdc, max 1 A
Main frequency 1 2 0 to 10 Vdc (20 kΩ) (min. 5 Vdc, 10 mA)
reference
4 to 20 mA
*8
A2 Analog input 2
(Frequency reference bias)
V I
P1 Multi-function photocoupler output 1
0 to 10 Vdc 20 kΩ
( ) (Zero speed)
0 to 10 V 4 to 20 mA / 0 to 20 mA (250 Ω) 48 Vdc, max. 50 mA
A3
Analog Input 3 P2 Multi-function photocoupler output 2
* 9 AC (Aux. frequency reference)
PC (Speed agree)
0 V 0 to 10 Vdc (20 kΩ) 48 Vdc, max 50 mA
* 7 −V Power supply, −10.5 Vdc, max. 20 mA
Termination resistor
MP Pulse train output
(120 Ω, 1/2 W) AC (Output frequency)
DIP switch 0 to 32 kHz (2.2 kΩ)
0V
R+ S2 10
* FM
Frequency Meter Adjusting Potentiometer
20 kΩ
Multi-function analog monitor output 1
MEMOBUS/Modbus R−
− + (Output frequency)
comm. S+ FM −10 to +10 Vdc (2 mA)
RS485/422 S−
Safety
switch
max. 115.2 kbps
IG
*
11
Ammeter potentiometer
20 kW Multi-function analog monitor output 2
S2
*
12
Safe Disable inputs H1
AM
AC − +
(Output current)
AM −10 to +10 Vdc (2 mA)
S1 H2 0V
*
11
shielded line E (G)
Open Wire
twisted-pair shielded line
control circuit terminal Safety relay / jumper DM+ EDM (Safety Electronic Device Monitor)
controller HC
main circuit terminal DM−
*12:: Make
Remove the jumper when installing a DC reactor. Certain models come with a built-in DC reactor: CIMR-2A0110 and above, CIMR-4A0058 and above.
*3: Enablesure Stall Prevention is disabled (L3-04 = 0) whenever using a braking resistor. If left enabled, the drive may not stop within the specified deceleration time.
* drive andthethedrive s braking resistor overload protection by setting L8-01 = 1 when using ERF type braking resistors. Wire the thermal overload relay between the
braking resistor and connect this signal to a drive digital input. Use this input to trigger a fault in the drive in case of a braking resistor overload.
*45:: Self-cooling motors do not require wiring that would be necessary with motors using a cooling fan.
*6: This
For control modes that do not use a motor speed feedback signal, PG option card wiring is not necessary.
* sequence figure shows an example of a sequence input to S1 through S8 using a non-powered relay or an NPN transistor (0 V common/sink mode: default). When
connections by PNP transistor (+24 V common/source mode) or preparing a external +24 V power supply, refer to A1000 Technical Manual for details.
*7: neous
The maximum output current capacity for the +V and − V terminals on the control circuit is 20 mA. Never short terminals +V, − V, and AC, as this can cause erro-
operation or damage the drive.
*89:: Set DIP switch S1 to select between a voltage or current input signal to terminal A2. The default setting is for voltage input.
*10Never connect to the AC terminal ground or chassis. This can result in erroneous operation or cause a fault.
*11:: Enable the termination resistor in the last drive in a MEMOBUS/Modbus network by setting DIP switch S2 to the ON position.
*12: Monitor outputs work with devices such as analog frequency meters, ammeters, voltmeters, and wattmeters. Do not use these outputs in a feedback loop.
* Disconnect the wire jumper between HC - H1 and HC - H2 when utilizing the Safe Disable input.
The sink/source setting for the Safe Disable input is the same as with the sequence input. Jumper S3 has the drive set for an external power supply. When not
using the Safe Disable input feature, remove the jumper shorting the input and connect an external power supply.
Time from input open to drive output stop is less than 1 ms. The wiring distance for the Safe Disable inputs should not exceed 30 m.
Note: When an Application Preset is selected, the drive I/O terminal functions change.
Control Circuit and Serial Communication Circuit Terminal Layout
DM− S− E(G) FM AC AM P1 P2 PC SC
DM+ S+
H2 R− SC A1 A2 A3 +V AC −V MA MB MC
H1 R+ MP
HC IG RP S1 S2 S3 S4 S5 S6 S7 S8 M1 M2 E(G)
28
Terminal Functions
Main Circuit Terminals Max. Applicable Motor Capacity indicates Heavy Duty
Voltage 200 V 400 V
Model CIMR-AA 2A0004 to 2A0081 2A0110，2A0138 2A0169 to 2A0415 4A0002 to 4A0044 4A0058, 4A0072 4A0088 to 4A1200
Max. Applicable Motor Capacity kW 0.4 to 18.5 22, 30 37 to 110 0.4 to 18.5 22, 30 37 to 560
R/L1, S/L2, T/L3 Main circuit input power supply Main circuit input power supply
U/T1, V/T2, W/T3 Drive output Drive output
B1, B2 Braking resistor unit − Braking resistor unit −
− ･DC reactor ･DC reactor
DC power supply
(+1, +2) DC power supply (+1, +2)
+1 DC power supply (+1, − )* DC power supply (+1, − )*
･DC power supply ･DC power supply
+2 (+1, − )* ( + −
1, *) Braking unit (+1, − )* (+1, − )* Braking unit
(+3, − ) (+3, − )
+3 − −
Ground terminal (100 Ω or less) Ground terminal (10 Ω or less)
* DC power supply input terminals (+1, − ) are not UL and CE certified.

Control Circuit Input Terminals (200 V/400 V Class)
Termi-
Terminal Type Signal Function Description Signal Level
nal
S1 Multi-function input selection 1 Closed: Forward run (default) Open: Stop (default)
S2 Multi-function input selection 2 Closed: Reverse run (default) Open: Stop (default)
S3 Multi-function input selection 3 External fault, N.O. (default)
S4 Multi-function input selection 4 Fault reset (default)
Multi-Function
S5 Multi-function input selection 5 Multi-step speed reference 1 (default) Photocoupler 24 Vdc, 8 mA
Digital Input
S6 Multi-function input selection 6 Multi-step speed reference 2 (default)
S7 Multi-function input selection 7 Jog frequency (default)
S8 Multi-function input selection 8 Closed: External baseblock
SC Multi-function input selection common Multi-function input selection common
RP Multi-function pulse train input Frequency reference (default) (H6-01 = 0) 0 to 32 kHz (3 k Ω )
+V Setting power supply +10.5 V power supply for analog reference (20 mA max.)
−V Setting power supply − 10.5 V power supply for analog reference (20 mA max.)
A1 Multi-function analog input 1 −10 to +10 Vdc for −100 to 100%, 0 to 10 Vdc for 0 to 100% (impedance 20 kΩ), Main frequency reference (default)
DIP switch S1 sets the terminal for a voltage or current input signal
Main Frequen-
− 10 to +10 Vdc for − 100 to +100%, 0 to 10 Vdc for 0 to 100% (impedance 20 k Ω )
cy Reference A2 Multi-function analog input 2
4 to 20 mA for 0 to 100%, 0 to 20 mA for 0 to 100% (impedance 250 Ω )
Input
Added to the reference value of the analog frequency for the main frequency reference (default)
− 10 to +10 Vdc for − 100 to +100%, 0 to 10 Vdc for 0 to 100% (impedance 20 k Ω )
A3 Multi-function analog input 3
Auxiliary frequency reference (default)
AC Frequency reference common 0V
E(G) Connection to wire shielding and option card ground wire −
Multi-Function P1 Multi-function photocoupler output (1) Zero speed (default)
48 Vdc or less, 2 to 50 mA
Photocoupler P2 Multi-function photocoupler output (2) Speed agree (default)
Photocoupler output*1
Output PC Photocoupler output common −
MA N.O. output Closed: Fault
Fault Relay Relay output
MB N.C. output Open: Fault
Output 250 Vac or less, 10 mA to 1 A，30 Vdc or less,
MC Digital output common −
10 mA to 1 A
Multi-Function M1 During run (default)
Multi-function digital output Minimum load: 5 Vdc, 10 mA
Digital Output*2 M2 Closed: During run
MP Pulse train input Output frequency (default) (H6-06 = 102) 0 to 32 kHz (2.2 k Ω )
FM Multi-function analog monitor (1) Output frequency (default) 0 to 10 Vdc for 0 to 100%
Monitor Output
AM Multi-function analog monitor (2) Output current (default) − 10 to 10 Vdc for − 100 to 100%
AC Analog common 0V Resolution: 1/1000
H1 Safety input 1 24 Vdc 8 mA. One or both open: Output disabled. Both closed: Normal operation.
Safety Input H2 Safety input 2 Internal impedance 3.3 k Ω , switching time at least 1 ms.
HC Safety input common Safety input common
Safety Monitor DM+ Safety monitor output Outputs status of Safe Disable function. Closed
48 Vdc or less, 50 mA or less
Output DM– Safety monitor output common when both Safe Disable channels are closed.
*12:: Connect a flywheel diode as shown below when driving a reactive load such as a relay coil. Diode must be rated higher than the circuit voltage.
* Refrain from assigning functions to terminals M1 and M2 that involve frequent switching, as doing so may shorten relay performance life. Switching life is
estimated at 200,000 times (assumes 1 A, resistive load).
Flywheel diode
External power 48 V max. Coil

(50 mA max.)
Serial Communication Terminals (200 V/400 V Class)

Termi-
Classification Signal Function Description Signal Level
nal
R+ Communications input (+) RS-422/485
MEMOBUS/ MEMOBUS/Modbus communications: Use a
R– Communications input (–) MEMOBUS/Modbus
Modbus RS-485 or RS-422 cable to connect the
S+ Communications output (+) communications protocol
Communica- drive.
S– Communications output (–) 115.2 kbps (max.)
tions
IG Shield ground 0V
29
Dimensions
Enclosures
Enclosures of standard products vary depending on the model. Refer to the table below.

Model CIMR-A 2A 0004 0006 0008 0010 0012 0018 0021 0030 0040 0056 0069 0081 0110 0138 0169 0211 0250 0312 0360 0415
Max. Applicable ND 0.75 1.1 1.5 2.2 3 3.7 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 110 110
Motor Capacity (kW) HD 0.4 0.75 1.1 1.5 2.2 3 3.7 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 110
Enclosure Panel【UL Type 1】 Standard
Open-Chassis Remove top cover of wall-mount enclosure for IP20 rating
Made to order*1
IP00 standard
2
Order-made
*

Model CIMR-A 4A 0002 0004 0005 0007 0009 0011 0018 0023 0031 0038 0044 0058 0072 0088 0103 0139 0165 0208 0250 0296 0362 0414 0515 0675 0930 1200
Max. Applicable ND 0.75 1.5 2.2 3 3.7 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 110 132 160 185 220 250 355 500 630
Motor Capacity (kW) HD 0.4 0.75 1.5 2.2 3 3.7 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 110 132 160 185 220 315 450 560
Enclosure Panel【UL Type 1】 Standard
Open-Chassis Remove top cover of wall-mount enclosure for IP20 rating
Made to order*1
IP00 standard Order-made
2
*
*12:: Contact a Yaskawa for UL Type 1 Kit availability.
* UL Type 1 is not available for this capacity.
Enclosure Panel【UL Type 1】
1.5
1.5
W1 4-d W1 4-d W1 4-d t2
H1
H0
H
H1
H1
H0
H
H
H2
H3
t1 t1 D1 t1
H2
D1 D1
H3
H2
W D W D 8 max. W 8 max. D
Figure 1 Figure 2 Figure 3
200 V Class
Model Max. Applicable Motor Capacity (kW) Dimensions (mm) Weight
Figure Cooling
CIMR-A 2A Normal Duty Heavy Duty W H D W1 H0 H1 H2 H3 D1 t1 t2 d (kg)
0004 0.75 0.4
3.1
0006 1.1 0.75 Self
0008 1.5 1.1 140 260 147 122 – 248 6 – 38 5 –
0010 2 .2 1.5 3.2 cooling
0012 3 .0 2.2
1 M5
0018 3 .7 3.0 –
164 3.5
0021 5.5 3.7 –
140 260 122 – 248 6 – 55 5
0030 7.5 5.5 –
167 4.0
0040 11 7.5 –
0056 15 11 180 300 187 160 – 284 8 – 75 5 – 5.6
0069 18.5 15 1 350 197 192 – 335 8 – 78 5 – 8.7
220 Fan
0081 22 18.5 2 365 197 192 350 335 8 15 78 5 – 9.7
0110 30 22 254 534 195 400 385 134 23 cooled
258 100 M6
0138 37 30 279 614 220 450 435 164 28
7.5 2.3 2.3
0169 45 37 41
329 730 283 260 550 535 180 110
0211 55 45 3 42
0250 75 55 83
456 960 330 325 705 680 12.5 255 130 3.2 3.2 M10
0312 90 75 88
0360 110 90 504 1168 350 370 800 773 13 368 130 4.5 4.5 M12 108
400 V Class
Figure Cooling
CIMR-A 4A Normal Duty Heavy Duty W H D W1 H0 H1 H2 H3 D1 t1 t2 d (kg)
0002 0.75 0.4 Self
0004 1.5 0.75 140 260 147 122 – 248 6 – 38 5 – 3.2
0005 2.2 1.5 cooling
0007 3 .0 2.2 3.4
0009 3.7 3.0 164
M5 3.5
0011 5 .5 3.7 1 140 260 122 – 248 6 – 55 5 –
0018 7 .5 5.5
3.9
0023 11 7.5 167
0031 15 11 55 5.4
180 300 160 – 284 8 – 5 –
0038 18.5 15 187 75 5.7
0044 22 18.5 220 350 197 192 – 335 8 – 78 5 – 8.3
0058 30 22 254 465 258 195 400 385 23 Fan
65 100 2.3
0072 37 30 279 515 258 220 450 435 27 cooled
0088 45 37 M6
630 258 510 495 7 .5 120 105 2.3 3.2 39
0103 55 45
329 260
0139 75 55 45
3 730 283 550 535 180 110 2.3
0165 90 75 46
0208 110 90 456 960 330 325 705 680 12.5 255 130 3.2 3.2 M10 87
0250 132 110 106
0296 160 132 504 1168 350 370 800 773 13 368 130 4.5 4.5 M12 112
0362 185 160 117
30
Open-Chassis【IP00】 Note: The enclosure type of figure 1 and figure 2 is IP20.
W1 4-d W1 4-d W1 4-d t2
H1
H1
H1
H
H
t1 t1 t1
D1
D D1 D1
H2
H2
10 max.
H2
W W D W D
10 max.
Figure 1 Figure 2 W1
Figure 3
W1 W1 330 440 330 8-d t2
4-d 6-d t2
t2
H1
H1
Dimensions
H
H1
H
H
H1
H
t1 t1
t1
D1
H2
H2
D1 D1
H2
8 max. W D 6 max. W D 6 max. W
8 max. 6 max. 6 max. D
200 V Class
Figure Cooling
CIMR-A 2A Normal Duty Heavy Duty W H D W1 H1 H2 D1 t1 t2 d (kg)
0004 0.75 0.4
3. 1
0006 1.1 0.75
Self
0008 1.5 1.1 140 260 147 122 248 6 38 5 –
cooling
0010 2.2 1.5 3.2
0012 3 2.2
M5
0018 3.7 3 1
164 3.5
0021 5.5 3.7
140 260 122 248 6 55 5 –
0030 7.5 5.5
167 4
0040 11 7.5
0056 15 11 180 300 187 160 284 8 75 5 – 5.6
0069 18.5 15 220 350 197 192 335 8 78 5 – 8. 7
0081 22 18.5 2 220 365 197 192 335 8 78 5 – 9.7
Fan
0110 30 22 250 400 195 385 21
3 258 7.5 100 2.3 2.3 M6 cooled
0138 37 30 275 450 220 435 25
0169 45 37 37
325 550 283 260 535 7.5 110 2.3 2.3
0211 55 45 38
0250 75 55 76
4 450 705 330 325 680 12.5 130 3.2 3.2 M10
0312 90 75 80
0360 110 90 98
500 800 350 370 773 13 130 4.5 4.5 M12
0415 110 110 99
400 V Class
Figure Cooling
CIMR-A 4A Normal Duty Heavy Duty W H D W1 H1 H2 D1 t1 t2 d (kg)
0002 0.75 0.4
Self
0004 1.5 0.75 140 260 147 122 248 6 38 5 – 3. 2
cooling
0005 2.2 1.5
0007 3 2.2 3.4
0009 3.7 3 140 260 164 122 248 6 55 5 –
M5 3.5
0011 5.5 3.7 1
0018 7.5 5.5
140 260 167 122 248 6 55 5 – 3.9
0023 11 7.5
0031 15 11 167 55 5.4
180 300 160 284 8 5 –
0038 18.5 15 187 75 5.7
0044 22 18.5 220 350 197 192 335 8 78 5 – 8. 3
0058 30 22 250 400 195 385 21
258 7.5 100 2.3
0072 37 30 275 450 220 435 25
3
0088 45 37 M6
325 510 258 260 495 105 2. 3 3.2 36 Fan
0103 55 45
7.5 cooled
0139 75 55 41
325 550 283 260 535 110 2 .3
0165 90 75 42
0208 110 90 450 705 330 325 680 12.5 130 3.2 3.2 M10 79
0250 132 110 4 96
0296 160 132 500 800 350 370 773 13 130 4.5 4.5 M12 102
0362 185 160 107
0414 220 185 500 950 370 923 13 135 125
0515 250 220 370 4 .5 4.5 M12
5 670 1140 440 1110 15 150 221
0675 355 315
0930 500 450 545
6 1250 1380 370 1100 1345 15 150 4 .5 4.5 M12
1200 630 560 555 31
Fully-Enclosed Design
The Open-Chassis type drive can be installed in a fully-enclosed panel.

An open-chassis model in a protective enclosure with the heatsink inside the panel allows for intake
air temperature up to 50˚C.
The heatsink can alternatively be mounted outside the enclosure panel, thus reducing the amount
of heat inside the panel and allowing for a more compact set up.
Current derating or other steps to ensure cooling are required at 50˚C
Cooling Design for Fully-Closed Enclosure Panel Mounting the External Heatsink Ventilation Space
Top cover* Side Clearance Top/Bottom Clearance
Fully-enclosed panel
Top cover* 50 mm min. 120 mm min. Airflow
60˚C Air temperature
at top of panel
−10 to +60˚C
Heatsink Heatsink
IP20/Open-Chassis
Attachment for
Bottom cover external heatsink
Drive intake temperature (Option)
−10 to +50˚C
50˚C
50 mm min. 120 mm min. Airflow
Ambient temperature 50˚C
30 mm min.
* Enclosure panel (CIMR-A□2A0004 to

0081, CIMR-A□4A0002 to 0044) can be
For installing the drive with capacity of 200 V
class 22 kW or 400 V class 22kW, be sure to
installed with the top and bottom covers leave enough clearance during installation for
removed. suspension eye bolts on both side of the unit
and main circuit wiring for maintenance.
Drive Watts Loss Data

200 V Class Normal Duty Ratings
Model Number
0004 0006 0008 0010 0012 0018 0021 0030 0040 0056 0069 0081 0110 0138 0169 0211 0250 0312 0360 0415
CIMR-A 2A
Max. Applicable Motor Capacity kW 0.75 1.1 1.5 2.2 3 3.7 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 110 110
Rated Output Current A 3.5 6 8 9.6 12 17.5 21 30 40 56 69 81 110 138 169 211 250 312 360 415
Carrier Frequency kHz 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Heatsink W 18 31 43 57 77 101 138 262 293 371 491 527 718 842 1014 1218 1764 2020 2698 2672
Heat
Internal W 47 51 52 58 64 67 83 117 144 175 204 257 286 312 380 473 594 665 894 954
Loss*
Total Heat Loss W 65 82 95 115 141 168 221 379 437 546 696 784 1004 1154 1394 1691 2358 2685 3592 3626
400 V Class Normal Duty Ratings

Model Number
0002 0004 0005 0007 0009 0011 0018 0023 0031 0038 0044 0058 0072 0088 0103 0139 0165 0208 0250 0296 0362 0414 0515 0675 0930 1200
CIMR-A 4A
Max. Applicable Motor Capacity kW 0.75 1.5 2.2 3 3.7 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 110 132 160 185 220 250 355 500 630
Rated Output Current A 2.1 4.1 5.4 6.9 8.8 11.1 17.5 23 31 38 44 58 72 88 103 139 165 208 250 296 362 414 515 675 930 1200
Carrier Frequency kHz 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Heatsink W 20 32 45 62 66 89 177 216 295 340 390 471 605 684 848 1215 1557 1800 2379 2448 3168 3443 4850 4861 8476 8572
Heat
Internal W 48 49 53 59 60 73 108 138 161 182 209 215 265 308 357 534 668 607 803 905 1130 1295 1668 2037 2952 3612
Loss*
Total Heat Loss W 68 81 98 121 126 162 285 354 456 522 599 686 870 992 1205 1749 2225 2407 3182 3353 4298 4738 6518 6898 11428 12184
200 V Class Heavy Duty Ratings

Model Number
0004 0006 0008 0010 0012 0018 0021 0030 0040 0056 0069 0081 0110 0138 0169 0211 0250 0312 0360 0415
CIMR-A 2A
Max. Applicable Motor Capacity kW 0.4 0.75 1.1 1.5 2.2 3 3.7 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 110
Rated Output Current A 3.2 5 6.9 8 11 14 17.5 25 33 47 60 75 85 115 145 180 215 283 346 415
Carrier Frequency kHz 8 8 8 8 8 8 8 8 8 8 8 8 8 8 5 5 5 5 5 2
Heatsink W 15 24 35 43 64 77 101 194 214 280 395 460 510 662 816 976 1514 1936 2564 2672
Heat
Internal W 44 48 49 52 58 60 67 92 105 130 163 221 211 250 306 378 466 588 783 954
Loss*
Total Heat Loss W 59 72 84 95 122 137 168 287 319 410 558 681 721 912 1122 1354 1980 2524 3347 3626
400 V Class Heavy Duty Ratings

Model Number
0002 0004 0005 0007 0009 0011 0018 0023 0031 0038 0044 0058 0072 0088 0103 0139 0165 0208 0250 0296 0362 0414 0515 0675 0930 1200
CIMR-A 4A
Max. Applicable Motor Capacity kW 0.4 0.75 1.5 2.2 3 3.7 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 110 132 160 185 220 315 450 560
Rated Output Current A 1.8 3.4 4.8 5.5 7.2 9.2 14.8 18 24 31 39 45 60 75 91 112 150 180 216 260 304 370 450 605 810 1090
Carrier Frequency kHz 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 5 5 5 5 5 5 5 2 2 2 2
Heatsink W 16 25 37 48 53 68 135 150 208 263 330 348 484 563 723 908 1340 1771 2360 2391 3075 3578 3972 4191 6912 7626
Heat
Internal W 45 46 49 53 55 61 86 97 115 141 179 170 217 254 299 416 580 541 715 787 985 1164 1386 1685 2455 3155
Loss*
Total Heat Loss W 61 71 86 101 108 129 221 247 323 404 509 518 701 817 1022 1324 1920 2312 3075 3178 4060 4742 5358 5876 9367 10781
* Heat loss is calculated in the following conditions:

･200 V class: Input voltage 220 V, power frequency 60 Hz, load ratio 100%
･400 V class: Input voltage 440 V, power frequency 60 Hz, load ratio 100%
Contact your Yaskawa or nearest agent when not calculating heat loss in the above conditions.
32
Attachment for External Heatsink 200 V Class
Model Dimension (mm)
When the heatsink is installed outside the drive, additional Code No.
CIMR-A 2A W H W1 H1 D1 D2
attachments are required. Installing the additional attachments will 0004
extend the width and height of the drive. 0006
Additional attachments are not required for models CIMR-A □ 0008 109 36.4 EZZ020800A
2A0110 and above, and CIMR-A □ 4A0058 and above because 0010
0012 158 294 122 280
installing a heatsink outside the drive can be performed on these
0018
models by replacing their standard mounting feet. 109 53.4
0021
Contact Yaskawa if an instruction manual is needed. EZZ020800B
0030
Note: 1. Contact Yaskawa for information on attachments for earlier models. 112 53.4
0040
2. To meet UL standards, covers are required for each capacitor for
models CIMR-A □ 2A0110 to 0415, CIMR-A □ 4A0058 to 4A1200. 0056 198 329 160 315 112 73.4 EZZ020800C
Contact Yaskawa for information on capacitor covers. 0069
238 380 192 362 119 76.4 EZZ020800D
0081
400 V Class
Model Dimension (mm)
Code No.
CIMR-A 4A W H W1 H1 D1 D2
0002
0004 109 36.4 EZZ020800A
0005
0007
Fully-Enclosed Design
158 294 122 280
0009 109 53.4
H1
H
0011 EZZ020800B
0018
112 53.4
0023
0031 112 53.4
198 329 160 315 EZZ020800C
0038 112 73.4
0044 238 380 192 362 119 76.4 EZZ020800D
W1
W D1 D2
Panel Modification for External Heatsink

Drill hole × 8 (d1) W
Drill hole × 4 (d1) Drill hole × 4 (d1) Drill hole × 6 (d1) W2 W1 W2
H3
H3
H4
2-5 dia. mtg. hole

a b a a a a a a 330 440 330
H3
H2
H2
H2
H2
H1
H1
H1
H
H
B
H
B
B
H1
H
B
W3 A W3 W3 A W3 W3 A W3
W3 A W3
352 200 380 200
H4
H4
H3
W2 W2 W2 W2 W2 W2
b b
150 120
8 8 H4
H5
8 8 8
10 166 10
8
a a a a a a a
186
35 * 35 35 * 35
H5
H4
H5
W1 W1 W1
130 Drill hole×8 (M4) 130
W W W 216 (for cover) 216
Modification Figure 1 Modification Figure 2 Modification Figure 3 Modification Figure 4

* Panel opening needed to replace an air filter
installed to the bottom of the drive. The
opening should be kept as small as possible.
200 V Class 400 V Class
Model Modifi- Dimensions (mm) Model Modifi- Dimensions (mm)
CIMR-A 2A cation CIMR-A 4A cation
Figure W H W1 W2 W3 H1 H2 H3 H4 H5 A B d1 Figure W H W1 W2 W3 H1 H2 H3 H4 H5 A B d1
0004 0002
0006 0004
0008 0005
0010 0007
158 294 122 9 9 280 8.5 8.5 7 − 140 263
0012 158 294 122 9 9 280 8.5 8.5 7 − 140 263 M5 0009
M5
0018 0011 1
1
0021 0018
0030 0023
0040 0031
198 329 160 10 9 315 17.5 10.5 7 − 180 287
0056 198 329 160 10 9 315 17.5 10.5 7 − 180 287 M5 0038
0069 0044 238 380 192 14 9 362 13 8 9 − 220 341 M6
238 380 192 14 9 362 13 8 9 − 220 341
0081 0058 250 400 195 385 234 369
19.5 8 8 7.5 8 7.5 M6
0110 250 400 195 385 234 369 0072 275 450 220 435 259 419
19.5 8 8 7.5 8 7.5 M6
0138 275 450 220 435 259 419 0088
510 495 479
0169 0103
325 550 260 24.5 8 535 8 7.5 8 7.5 309 519 325 260 24.5 8 8 7.5 8 7.5 309 M6
0211 0139
2 550 535 519
0250 0165 2
450 705 325 54.5 8 680 12.5 12.5 12.5 12.5 434 655 M10
0312 0208 450 705 325 54.5 8 680 12.5 12.5 12.5 12.5 434 655 M10
0360 0250
500 800 370 57 8 773 16 14 17 13 484 740 M12
0415 0296 500 800 370 57 8 773 16 14 17 13 484 740 M12
0362
0414 500 950 370 57 8 923 16 14 17 13 484 890 M12
0515
3 670 1140 440 107 8 1110 19 15 19 15 654 1072 M12
0675
0930
4 125013801100 67 8 1345 19 20 19 15 12341307 M12
1200 33
Peripheral Devices and Options
Name Purpose Model, Manufacturer Page
Power Always install a GFI on the power-supply side to protect the power
Supply supply system and to prevent an overload at the occurrence of
shortcircuit, and to protect the drive from ground faults that could NV series* by Mitsubishi
Ground Fault Interrupter result in electric shock or fire. Electric Corporation
36
(GFI) Note: When a GFI is installed for the upper power supply system, an NS Series* by Schneider
MCCB can be used instead of a GFI. Choose a GFI designed Electric
to minimize harmonics specifically for AC drives. Use one GFI
per drive, each with a current rating of at least 30 mA.
Fusible Disconnect Always install a circuit breaker on the power-supply side to protect the power NF series* by Mitsubishi
Circuit Breaker 36
Ground Fault Interrupter, supply system and to prevent an overload at the occurrence of a short-circuit. Electric Corporation
Circuit Breaker (MCCB) Interrupts the power supply to the drive. In addition to protecting drive circuitry, SC series* by Fuji Electric FA
Magnetic Contactor 37
a magnetic contactor also prevents damage to a braking resistor if used. Components & Systems Co., Ltd
Absorbs the voltage surge from switching of electro-magnetic DCR2 series
contactors and control relays. RFN series
Surge Protector 37
Install a surge protector to the magnetic contactors and control by Nippon Chemi-
relays as well as magnetic valves and magnetic braking coil. con Corporation
Magnetic Contactor
Improve the input power ratio of the drive. The DC reactor is a built-in
DC Reactor model of 22 kW or more. UZDA series 38
Option: 18.5 kW or less.
Used for harmonic current suppression and total improving power factor.
Should be used if the power supply capacity is larger than 600 kVA.
AC Reactor Suppresses harmonic current UZBA series 40
Improves the power factor of the input power supply
Surge Protector
Reduces noise from the line that enters into the drive input F6045GB
Zero Phase Reactor power system. Should be installed as close as possible to F11080GB 42
the drive. Can be used on both the input and output sides. by Hitachi Metals, Ltd.
Protects internal circuitry in the event of component failure. CR2LS series
AC Reactor Fuse should be connected to the input terminal of the drive. CR6L series
Fuse / Fuse Holder Be sure to use a fuse or fuse holder for the CIMR-A □ 4A0930 or the CM, CMS series 43
CIMR-A □ 4A1200. by Fuji Electric FA Compo-
Note: Refer to the instruction manual for information on UL approval. nents & Systems Co., Ltd
Reduces noise from the line that enters into the drive input power system.
3XYG 1003
Capacitor-Type Noise The noise filter can be used in combination with a zero-phase reactor.
by Okaya Electric 43
Filter Note: Available for drive input only. Do not connect the noise filter to the
Industries Co., Ltd.
output terminals.
Zero Phase Reactor Reduces noise from the line that enters into the drive input power system.
LNFD series
Should be installed as close as possible to the drive.
Fuse Input Noise Filter LNFB series 44
Note: For CE Marking (EMC Directive) compliant models, refer to A1000
FN series
Technical Manual.
Input Noise Filter Reduces noise from the line that enters into the drive input power LF series by NEC
Output Noise Filter 46
system. Should be installed as close as possible to the drive. Tokin Corporation
Isolates the drive I/O signal, and is effective in reducing
Isolator DGP2 series 47
inductive noise.
Used to shorten the deceleration time by dissipating regenerative energy ERF-150WJ series
Braking Resistor 48
through a resistor. Usage 3% ED, requires a separate attachment. CF120-B579 series
Attachment for Braking
A braking resistor can be attached to the drive. EZZ020805A 51
Resistor
DC Reactor External Heatsink Use the external heatsink attachment for installation with the
EZZ021711A 52
Attachment for Braking Unit heatsink outside the enclosure.
Used to shorten the deceleration time by dissipating
Braking Resistor Unit regenerative energy through a resistor unit (10% ED). LKEB series 48
A thermal overload relay is built in (10% ED).
Shortened deceleration time results when used
Momentary Braking Unit CDBR series 48
with a Braking Resistor Unit.
Power Loss
Provides power supply for the control circuit and option
Recovery Unit PS-A10LB (200 V class)
24 V Power Supply boards. Note: Parameter settings cannot be changed when 47
PS-A10HB (400 V class)
Braking Resistor Ground the drive is operating solely from this power supply.
Braking Resistor System control device that enables optimum system configuration
VS System Module JGSM series 52
Unit by combining modules for automatic control system.
Braking Unit USB Copy ･Can copy parameter settings easily and quickly to be later
USB Copy Unit（RJ-45/
Unit (RJ-45/USB DriveWizardPlus
USB compatible plug）
transferred to another drive. JVOP-181 55
DriveWorksEZ
adapter) ･Adapter for connecting the drive to the USB port of a PC
Isolator
Connect the drive and PC when using DriveWizard or Commercially available
PC cable 55
Serial DriveWorksEZ. The cable length must be 3 m or less. USB2.0 A/B cable.
Comm For easier operation when using the optional LCD operator.
Port LCD Operator Allows for remote operation. JVOP-180 54
PC Includes a Copy function for saving drive settings.
LCD Operator Extension WV001: 1 m
Noise Filter Cable for connecting the LCD operator. 54
Cable WV003: 3 m
(output side)
Momentary Power Loss Ensures continuous drive operation for a power loss of up to P0010 Type (200 V class)
47
Recovery Unit 2 s. P0020 Type (400 V class)
Frequency Meter,
DCF-6A 56
Current Meter
Zero Phase Reactor Variable Resistor Board
(20 k Ω ) ETX3120 56
Frequency Setting
RH000739 56
Potentiometer (2 k Ω )
Frequency Meter Adjusting Allows the user to set and monitor the frequency, current,
RH000850 56
Potentiometer (20 k Ω ) and voltage using an external device.
Low Voltage Manual Load Control Dial for Frequency
Switch CM-3S 56
Setting Potentiometer
Output Voltage Meter SCF-12NH

57
Motor
Voltage Transformer UPN-B
Attachment for External Required for heatsink installation. Current derating may be
− 33
Heatsink needed when using a heatsink.
Low Voltage Manual Prevents shock from the voltage created on the terminals AICUT, LB series* by Aichi
̶
Load Switch board from a coasting synchronous motor. Electric Works Co., Ltd
34 Ground *: Recommended by Yaskawa. Contact the manufacturer in question for availability and specifications of non-Yaskawa products.
Option Cards
These option cards are compliant with the RoHS Directive.
Type Name Model Function Manual No.
Enables high-precision and high-resolution analog speed reference setting.
Input signal level: − 10 to +10 Vdc (20 k Ω )
Speed Reference Card
4 to 20 mA (250 Ω )
Analog Input AI-A3 TOBPC73060038
Input channels: 3 channels, DIP switch for input voltage/input current selection
Input resolution: Input voltage 13 bit signed (1/8192)
Input current 1/4096
Enables 16-bit digital speed reference setting.
Input signal: 16 bit binary, 2 digit BCD + sign signal + set signal
Digital Input DI-A3 Input voltage: 24 V (isolated) TOBPC73060039
Input current: 8 mAa
User-set: 8 bit, 12 bit, 16 bit
MECHATROLINK- Used for running or stopping the drive, setting or referencing parameters, and monitoring TOBPC73060050
SI-T3 output frequency, output current, or similar items through MECHATROLINK- communication
Interface with the host controller. SIEPC73060050
MECHATROLINK- Used for running or stopping the drive, setting or referencing parameters, and monitoring TOBPC73060062
SI-ET3*1 output frequency, output current, or similar items through MECHATROLINK- communication
Interface with the host controller. SIEPC73060062
Used for running or stopping the drive, setting or referencing parameters, and monitoring TOBPC73060044
CC-Link Interface SI-C3 output frequency, output current, or similar items through CC-Link communication with the
host controller. SIEPC73060044
Communications Option Card
DeviceNet Interface SI-N3 output frequency, output current, or similar items through DeviceNet communication with the

Used for HVAC control, running or stopping the drive, setting or referencing TOBPC73060056
LONWORKS Interface SI-W3 parameters, and monitoring output current, watt-hours, or similar items through LONWORKS
communications with the host controller. SIEPC73060056
PROFIBUS-DP Used for running or stopping the drive, setting or referencing parameters, and monitoring TOBPC73060042
SI-P3 output frequency, output current, or similar items through CANopen communication with the
Interface host controller. SIEPC73060042
CANopen Interface SI-S3 output frequency, output current, or similar items through CANopen communication with the
Used for running or stopping the drive, setting or referencing parameters, and monitoring
EtherCAT Interface SI-ES3*2 output frequency, output current, or similar items through EtherCAT communication with the ̶
Built-in Type (connected to connector)
host controller.
Used for running or stopping the drive, setting or referencing parameters, and monitoring
EtherNet/IP Interface SI-EN3*2 output frequency, output current, or similar items through EtherNet/IP communication with the ̶
host controller.
Modbus TCP/IP Used for running or stopping the drive, setting or referencing parameters, and monitoring
SI-EM3*2 output frequency, output current, or similar items through Modbus TCP/IP communication with ̶
Interface the host controller.
Outputs analog signal for monitoring drive output state (output freq., output current etc.).
Monitor Option Card
Output resolution: 11 bit signed (1/2048)

Analog Monitor AO-A3 TOBPC73060040
Output voltage: − 10 to +10 Vdc (non-isolated)
Terminals: 2 analog outputs
Outputs isolated type digital signal for monitoring drive run state (alarm signal, zero speed de-
tection, etc.)
Digital Output DO-A3 TOBPC73060041
Terminals: 6 photocoupler outputs (48 V, 50 mA or less)
2 relay contact outputs (250 Vac, 1 A or less 30 Vdc, 1 A or less)
For control modes requiring a PG encoder for motor feedback.
Phase A, B, and Z pulse (3-phase) inputs (complementary type)
Complimentary Type Max. input frequency: 50 kHz
PG-B3 TOBPC73060036
PG Pulse monitor output: Open collector, 24 V, max. current 30 mA
Power supply output for PG: 12 V, max. current 200 mA
Note: Not available in Advanced Open Loop Vector for PM.
Phase A, B, and Z pulse (differential pulse) inputs (RS-422)
Line Driver PG PG-X3 Max. input frequency: 300 kHz TOBPC73060037
Pulse monitor output: RS-422
Power supply output for PG: 5 V or 12 V, max. current 200 mA
For control modes requiring a PG encoder for PM motor feedback.
Encoder type: EnDat 2.1/01, EnDat 2.2/01, and EnDat 2.2/22（HEIDENHAIN）,
PG Speed Controller Card
HIPERFACE（SICK STEGMANN）
Maximum input frequency: 20 kHz（Used with low-speed gearless motors.）
Note: EnDat 2.2/22 does not have maximum input frequency.
Wiring length: 20 m max. for the encoder, 30 m max. for the pulse monitor
Motor Encoder Pulse monitor: Matches RS-422 level
Feedback (EnDat, PG-F3 Note: EnDat 2.2/22 is not available. TOBPC73060051
HIPERFACE) Interface [Encoder power supply: 5 V, max current 330 mA or 8 V, max current 150 mA]
Use one of the following encoder cables.

EnDat2.1/01，EnDat2.2/01 : 17-pin cable from HEIDENHAIN
EnDat2.2/22 : 8-pin cable from HEIDENHAIN
HIPERFACE : 8-pin cable from SICK STEGMANN
Note: Not available for drive models CIMR-A □ 4A0930 and 4A1200.

Can be connected to the TS2640N321E64 resolver made by Tamagawa Seiki Co., Ltd. and
electrically compatible resolvers.
Resolver Interface The representative electrical characteristics of the TS2640N321E64 are as follows.
RG-RT3 Input voltage: 7 Vac rms 10 kHz TOBPC73060053
for TS2640N321E64 Transformation ratio: 0.5 ± 5%
maximum input current: 100 mArms
Wiring length: 10 m max. (100 m max. for the SS5 and SS7 series motor manufactured by
Yaskawa Motor Co.,, and PG cables manufactured by Yaskawa Controls Co., Ltd.)
Note: 1. Each communication option card requires a separate configura-

tion file to link to the network. *1 : Contact
Available in the A1000 software versions PRG: 1020 and later.
Yaskawa for details.
2. PG speed controller card is required for PG control.
*2 : Under development. 35
Peripheral Devices and Options (continued)
Ground Fault Interrupter,

Circuit Breaker
Device selection is based on the motor capacity.
Make sure that the rated breaking capacity is higher than the short-
circuit current for the power supply.
Protect the wiring to withstand the short-circuit current for the
power supply using a combination of fuses if the rated breaking
capacity of the circuit breaker or ground fault interrupter is Ground Fault Interrupter Circuit Breaker
insufficient, such as when the power transformer capacity is large.
【Mitsubishi Electric Corporation】【Mitsubishi Electric Corporation】
200 V Class
Ground Fault Interrupter Circuit Breaker
Motor
Without Reactor*1 With Reactor*2 Without Reactor*1 With Reactor*2
Capacity
(kW) Rated Interrupt Capacity Rated Interrupt Capacity Rated Interrupt Capacity Rated Interrupt Capacity
Model Model Model Model
Current (A) (kA) Icu/Ics*3 Current (A) (kA) Icu/Ics*3 Current (A) (kA) Icu/Ics*3 Current (A) (kA) Icu/Ics*3
0.4 NV32-SV 5 10/10 NV32-SV 5 10/10 NF32-SV 5 7.5/7.5 NF32-SV 5 7.5/7.5
5.5 NV63-SV 50 15/15 NV63-SV 40 15/15 NF63-SV 50 15/15 NF63-SV 40 15/15
11 NV125-SV 75 50/50 NV125-SV 75 50/50 NF125-SV 75 50/50 NF125-SV 75 50/50
15 NV250-SV 125 85/85 NV125-SV 100 50/50 NF250-SV 125 85/85 NF125-SV 100 50/50
22 − − − NV250-SV 150 85/85 − − − NF250-SV 150 85/85
30 − − − NV250-SV 175 85/85 − − − NF250-SV 175 85/85
37 − − − NV250-SV 225 85/85 − − − NF250-SV 225 85/85
45 − − − NV400-SW 250 85/85 − − − NF400-CW 250 50/25
55 − − − NV400-SW 300 85/85 − − − NF400-CW 300 50/25
75 − − − NV400-SW 400 85/85 − − − NF400-CW 400 50/25
90 − − − NV630-SW 500 85/85 − − − NF630-CW 500 50/25
110 − − − NV630-SW 600 85/85 − − − NF630-CW 600 50/25
*12:: The AC or DC reactor is not connected to the drive.

*3: The AC or DC reactor is connected to the drive.
*NoteIcu : Rated ultimate short-circuit breaking capacity Ics: Rated service short-circuit breaking capacity
: 200 V models 22 kW and above come with a built-in DC reactor that improves the power factor.
400 V Class
Ground Fault Interrupter Circuit Breaker
Motor
Without Reactor*1 With Reactor*2 Without Reactor*1 With Reactor*2
Capacity
(kW) Rated Interrupt Capacity Rated Interrupt Capacity Rated Interrupt Capacity Rated Interrupt Capacity
Model Model Model Model
Current (A) (kA) Icu/Ics*3 Current (A) (kA) Icu/Ics*3 Current (A) (kA) Icu/Ics*3 Current (A) (kA) Icu/Ics*3
11 NV63-SV 50 7.5/7.5 NV63-SV 40 7.5/7.5 NF63-SV 50 7.5/7.5 NF63-SV 40 7.5/7.5
15 NV125-SV 60 25/25 NV63-SV 50 7.5/7.5 NF125-SV 60 25/25 NF63-SV 50 7.5/7.5
22 − − − NV125-SV 75 25/25 − − − NF125-SV 75 25/25
30 − − − NV125-SV 100 25/25 − − − NF125-SV 100 25/25
37 − − − NV250-SV 125 36/36 − − − NF250-SV 125 36/36
45 − − − NV250-SV 150 36/36 − − − NF250-SV 150 36/36
55 − − − NV250-SV 175 36/36 − − − NF250-SV 175 36/36
75 − − − NV250-SV 225 36/36 − − − NF250-SV 225 36/36
90 − − − NV400-SW 250 42/42 − − − NF400-CW 250 25/13
110 − − − NV400-SW 300 42/42 − − − NF400-CW 300 25/13
132 − − − NV400-SW 350 42/42 − − − NF400-CW 350 25/13
160 − − − NV400-SW 400 42/42 − − − NF400-CW 400 25/13
185 − − − NV630-SW 500 42/42 − − − NF630-CW 500 36/18
220 − − − NV630-SW 630 42/42 − − − NF630-CW 630 36/18
250 − − − NV630-SW 630 42/42 − − − NF630-CW 630 36/18
315 − − − NV800-SEW 800 42/42 − − − NF800-CEW 800 36/18
355 − − − NV800-SEW 800 42/42 − − − NF800-CEW 800 36/18
450 − − − NV1000-SB 1000 85 − − − NF1000-SEW 1000 85/43
500 − − − NV1200-SB 1200 85 − − − NF1250-SEW 1250 85/43
560 − − − NS1600H*4 1600 70 − − − NF1600-SEW 1600 85/43
630 − − − NS1600H*4 1600 70 − − − NF1600-SEW 1600 85/43
*1: The AC or DC reactor is not connected to the drive.

*3: Icu: Rated ultimate short-circuit breaking capacity Ics: Rated service short-circuit breaking capacity
36 *4: NS series by Schneider Electric.

Note: 400 V models 22 kW and above come with a built-in DC reactor that improves the power factor.
Magnetic Contactor
Base device selection on motor capacity. Wiring a Magnetic Contactor in Parallel
Junction
Terminal Magnetic
ELCB or MCCB R1 Contactor 1
1(R) 4(U)
A1000
2(S) 5(V)
3(T) 6(W) R/L1
S1
Magnetic
S/L2
Contactor 2
1(R) 4(U) T/L3
T1 2(S) 5(V)
3(T) 6(W)
Magnetic Contactor Note: When wiring contactors in parallel, make sure wiring lengths
【Fuji Electric FA Components & Systems Co., Ltd】 are the same to keep current flow even to the relay terminals.

Motor Capacity Without Reactor*1 With Reactor*2 Motor Capacity Without Reactor*1 With Reactor*2
(kW) Model Rated Current (A) Model Rated Current (A) (kW) Model Rated Current (A) Model Rated Current (A)
0.4 SC-03 11 SC-03 11 0.4 SC-03 7 SC-03 7
0.75 SC-05 13 SC-03 11 0.75 SC-03 7 SC-03 7
1.5 SC-4-0 18 SC-05 13 1.5 SC-05 9 SC-05 9
2.2 SC-N1 26 SC-4-0 18 2.2 SC-4-0 13 SC-4-0 13
3.7 SC-N2 35 SC-N1 26 3 .7 SC-4-1 17 SC-4-1 17
5.5 SC-N2S 50 SC-N2 35 5 .5 SC-N2 32 SC-N1 25

7.5 SC-N3 65 SC-N2S 50 7.5 SC-N2S 48 SC-N2 32
11 SC-N4 80 SC-N4 80 11 SC-N2S 48 SC-N2S 48
15 SC-N5 93 SC-N4 80 15 SC-N3 65 SC-N2S 48
18.5 SC-N5 93 SC-N5 93 18.5 SC-N3 65 SC-N3 65
22 − − SC-N6 125 22 − − SC-N4 80
30 − − SC-N7 152 30 − − SC-N4 80
37 − − SC-N8 180 37 − − SC-N5 90
45 − − SC-N10 220 45 − − SC-N6 110
55 − − SC-N11 300 55 − − SC-N7 150
75 − − SC-N12 400 75 − − SC-N8 180
90 − − SC-N12 400 90 − − SC-N10 220
110 − − SC-N14 600 110 − − SC-N11 300
Note: 200 V models 22 kW and above come with a built-in DC reactor that 132 − − SC-N11 300
improves the power factor. 160 − − SC-N12 400
185 − − SC-N12 400
220 − − SC-N14 600
250 − − SC-N14 600
315 − − SC-N16 800
355 − − SC-N16 800
450 − − SC-N14 × 2*3 600*4
500 − − SC-N14 × 2*3 600*4
560 − − SC-N16 × 2*3 800*4
630 − − SC-N16 × 2*3 800*4
*12:: The AC or DC reactor is not connected to the drive.

*4: When two units are connected in parallel.
Surge Protector *NoteRated current for a single unit.

: 400 V models 22 kW and above come with a built-in DC reactor that
improves the power factor.
Dimensions (mm) 68
Mounting hole specifications
2-3 tapped
26
Lead 2-4 dia.

cable Lead cable: 910
: 25 mtg. hole
0
9
4.8 dia. 0.8 dia.

33
30 16
7
24
30 18 dia. 36 22.5 16 76
34
Weight: 22 g Weight: 5 g Weight: 150 g

Model: DCR2-50A22E Model: DCR2-10A25C Model: RFN3AL504KD
【Nippon Chemi-Con Corporation
Product Line
Surge Protector
Model Specifications Code No.
Peripheral Devices
200 to 230 V Large-Capacity Coil (other than relay) DCR2-50A22E 220 Vac 0.5 μ F+200 Ω C002417
MY2，MY3【Omron Corporation】
Control
200 to 240 V MM2，MM4【Omron Corporation】 DCR2-10A25C 250 Vac 0.1 μ F+100 Ω C002482
Relay
HH22，HH23【Fuji Electric FA Components & Systems Co., Ltd】
380 to 480 V RFN3AL504KD 1000 Vdc 0.5 μ F+220 Ω C002630 37
DC Reactor (UZDA-B for DC circuit)

Base device selection on motor capacity.
Lead Wire Type Connection Diagram
Power Supply Capacity (kVA)

4000 DC reactor
Reactor required U X
ELCB or MCCB
＋2 ＋1
600 R R/L1 U/ T1
Reactor
unnecessary S S/L2 V/ T2 M
0 T T/L3 W/ T3
60 400
A1000
Drive Capacity (kVA) Note: Remove jumper
between +1 and +2,
Note: Reactor recommended for power
and wire as shown
supplies larger than 600 kVA.
in the diagram.
Dimensions (mm)
Y1
Nameplate H
60
G
Y2
K
Connection lead Mtg. hole × 2

(1.25 mm2) Nameplate (1 Dia.) Terminal × 2 Nameplate
Terminal × 2 (2 Dia.) (2 Dia.)
U
U
Z
Z
Z
X X
K
Mtg. hole × 4 B H
1.5
B B
X X (1 Dia.) X Y2 Y1
Mtg. hole × 4
Figure 1 Figure 2 Figure 3 (1 Dia.)
200 V Class
Motor Dimensions Watt Wire
200 V 級三相入力シリーズ
Capacity Current Inductance Code No. Figure (mm) Weight Loss Gauge*1
(kW) (A) (mH) X Y2 Y1 Z B H K G 1 Dia. 2 Dia. (kg) (W) (mm2)
0.4 5.4 8 X010048 1 85 − − 53 74 − − 32 M4 − 0.8 8 2
0.75 5.4 8 X010048 1 85 − − 53 74 − − 32 M4 − 0.8 8 2
1.5 18 3 X010049 2 86 80 36 76 60 55 18 − M4 M5 2 18 5.5
2.2 18 3 X010049 2 86 80 36 76 60 55 18 − M4 M5 2 18 5.5
3.7 18 3 X010049 2 86 80 36 76 60 55 18 − M4 M5 2 18 5.5
5.5 36 1 X010050 2 105 90 46 93 64 80 26 − M6 M6 3.2 22 8
7.5 36 1 X010050 2 105 90 46 93 64 80 26 − M6 M6 3.2 22 8
11 72 0 .5 X010051 2 105 105 56 93 64 100 26 − M6 M8 4.9 29 30
15 72 0 .5 X010051 2 105 105 56 93 64 100 26 − M6 M8 4.9 29 30
18.5 90 0.4 X010176 2 133 120 52.5 117 86 80 25 − M6 M8 6.5 45 30
22*2 105 0.3 300-028-140 3 133 120 52.5 117 86 80 25 − M6 M10 8 55 50
22 to 110 Built-in
* 1: Cable: Indoor PVC (75˚C), ambient temperature 45˚C, 3 lines max.

* 2: Select a motor of this capacity when using a CIMR-A 2A0081.
400 V Class
Motor Dimensions Watt Wire
Capacity Current Inductance Code No. Figure (mm) Weight Loss Gauge*1
(kW) (A) (mH) X Y2 Y1 Z B H K G 1 Dia. 2 Dia. (kg) (W) (mm2)
0.4 3.2 28 X010052 1 85 − − 53 74 − − 32 M4 − 0.8 9 2
0.75 3.2 28 X010052 1 85 − − 53 74 − − 32 M4 − 0.8 9 2
1.5 5.7 11 X010053 1 90 − − 60 80 − − 32 M4 − 1 11 2
2.2 5.7 11 X010053 1 90 − − 60 80 − − 32 M4 − 1 11 2
3.7 12 6.3 X010054 2 86 80 36 76 60 55 18 − M4 M5 2 16 2
5.5 23 3.6 X010055 2 105 90 46 93 64 80 26 − M6 M5 3.2 27 5.5
7.5 23 3.6 X010055 2 105 90 46 93 64 80 26 − M6 M5 3.2 27 5.5
11 33 1 .9 X010056 2 105 95 51 93 64 90 26 − M6 M6 4 26 8
15 33 1 .9 X010056 2 105 95 51 93 64 90 26 − M6 M6 4 26 8
18.5 47 1.3 X010177 2 115 125 57.5 100 72 90 25 − M6 M6 6 42 14
22*2 56 1 300-028-141 3 133 105 52.5 117 86 80 25 − M6 M6 7 50 22
22 to 630 Built-in
* 1: Cable: Indoor PVC (75˚C), ambient temperature 45˚C, 3 lines max.

* 2: Select a motor of this capacity when using a CIMR-A 4A0044.
38
Terminal Type
Dimensions (mm)
2 Dia. 2 Dia.
U X
U X
Z
Name
Z
plate
Name

plate
B G
B K
X 70 X
H
1 Dia. 1 Dia. Y2 Y1
Figure 1 Figure 2
200 V Class
Motor Dimensions Watt
200 V 級三相入力シリーズ (mm)
Capacity Current Inductance Code No. Figure Weight Loss
(kW) (A) (mH) X Y2 Y1 Z B H K G 1 Dia. 2 Dia. (kg) (W)
0.4
5.4 8 300-027-130 1 85 − − 81 74 − − 32 M4 M4 0.8 8
0.75
1.5
2.2 18 3 300-027-131 86 84 36 101 60 55 18 − M4 M4 2 18
3.7
5.5
36 1 300-027-132 2 105 94 46 129 64 80 26 − M6 M4 3.2 22
7.5
11
72 0.5 300-027-133 105 124 56 135 64 100 26 − M6 M6 4.9 29
15
18.5 90 0.4 300-027-139 133 147.5 52.5 160 86 80 25 − M6 M6 6.5 44
400 V Class
Capacity Current Inductance Code No. Figure (mm) Weight Loss
(kW) (A) (mH) X Y2 Y1 Z B H K G 1 Dia. 2 Dia. (kg) (W)
0.4
3.2 28 300-027-134 85 − − 81 74 − − 32 M4 M4 0.8 9
0.75
1
1.5
5.7 11 300-027-135 90 − − 88 80 − − 32 M4 M4 1 11
2.2
3.7 12 6.3 300-027-136 86 84 36 101 60 55 18 − M4 M4 2 16
5.5
23 3.6 300-027-137 105 104 46 118 64 80 26 − M6 M4 3.2 27
7.5
2
11
33 1.9 300-027-138 105 109 51 129 64 90 26 − M6 M4 4 26
15
18.5 47 1.3 300-027-140 115 142.5 57.5 136 72 90 25 − M6 M5 6 42
39
AC Reactor (UZBA-B for 50/60 Hz Input)

Lead Wire Type Connection Diagram
AC reactor
ELCB or MCCB
U X
R R/L1 U/ T1
V Y
S S/L2 V/ T2 M
W Z
T T/L3 W/ T3
A1000
Note: When using low noise
type drives (high-carrier
frequency of 2.5 kHz or
more), do not connect an
AC reactor to the output
Dimensions (mm) side (U, V, W) of the drive.
Hanging bolt × 2 (M8) Terminal × 6 (M) Hanging bolt × 2 (M8) Terminal × 6 (M)
40
40
Terminal × 6 (M) Nameplate Namep Nameplate
U V W
U V W
160±10
U
C
V W
C
C
X Y Z 205±10
X Y Z
I
X Y Z
I
I
D H
D H D H
F E
65±5
F E F E
A B
A B A B
L B1
B1 B1
Mounting hole K Mtg. hole × 4 (J)
specifications Mtg. hole × 4 (J) Mtg. hole × 4 (J)
200 V Class
(kW) (A) (mH) A B B1 C D E F H I J K L M (kg) (W)
3.7 20 0.53 X002491 114 11.5 3 35
88 70 M5
5 .5 30 0.35 X002492 130 119 105 50 130 22 3.2 M6 9 7 3 45
7 .5 40 0.265 X002493 98 139 80 11.5 M6 4 50
11 60 0.18 X002495 160 105 147.5 130 75 85 160 25 2.3 M6 10 7 M6 6 65
15 80 0.13 X002497 155 75
M8
18.5 90 0.12 X002498 180 100 150 150 75 80 180 25 2.3 M6 10 7 8
1 90
22 120 0.09 X002555 155 M10
30 160 0.07 X002556 100 170 80 12 100
210 175 75 205 25 3.2 M6 10 7 M10
37 200 0.05 X002557 115 182.5 95 15 110
45 240 0.044 X002558 7 M10 125
240 126 218 215 150 110 240 25 3.2 M8 8 23
55 280 0.039 X002559 10 M12 130
75 360 0.026 X002560 270 162 241 230 150 130 260 40 5 M8 16 10 M12 32 145
90 500 0.02 X010145
2 330 162 281 270 150 130 320 40 4.5 M10 16 10 M12 55 200
110 500 0.02 X010145
400 V Class
7.5 20 1.06 X002502 90 115 70 5 50
160 130 75 160 25 2.3 M6 10 7 M5
11 30 0.7 X002503 105 132.5 85 6 65
15 40 0.53 X002504 140
8
18.5 50 0.42 X002505 180 100 145 150 75 80 180 25 2 .3 M6 10 7 M6 90
22 60 0.36 X002506 150 8.5
30 80 0.26 X002508 100 150 80 12 95
1 210 175 75 205 25 3.2 M6 10 7 M8
37 90 0.24 X002509 115 177.5 95 15 110
45 120 0.18 X002566 193 130
240 126 205 150 110 240 25 3 .2 M8 8 10 M10 23
55 150 0.15 X002567 198 150
75 200 0.11 X002568 231 M10
90 250 0.09 X002569 270 162 230 150 130 260 40 5 M8 16 10 32 135
246 M12
110 250 0.09 X002569
132 330 0.06 X002570
320 165 253 275 150 130 320 40 4.5 M10 17.5 12 M12 55 200
160 330 0.06 X002570
185 490 0.04 X002690 2
220 490 0.04 X002690 330 176 293 275 150 150 320 40 4.5 M10 13 12 M12 60 340
250 490 0.04 X002690
315 660 0.03 300-032-353
3 330 216 353 285 150 185 320 40 4.5 M10 22 12 M16 80 300
355 660 0.03 300-032-353
450 490*1 0.04 X002690 × 2*2
2 330 176 293 275 150 150 320 40 4.5 M10 13 12 M12 60 340
500 490*1 0.04 X002690 × 2*2
560 660*1 0.03 300-032-353 × 2*2
3 330 216 353 285 150 185 320 40 4.5 M10 22 12 M16 80 300
630 660*1 0.03 300-032-353 × 2*2
*12:: Rated current for a single unit.
40 * When two units are connected in parallel.

Terminal Type
Dimensions (mm)
M
Mtg. hole × 6 (M)
UX V YWZ U X V YWZ
Nameplate
Nameplate
C
C
I
I

D H D H
F F Ｅ
E
Ａ B
A B
B1
Terminal × 6 (M)
Mtg. hole × 4 (J)
L
L Mounting hole K
Mounting hole K specifications (E)
specifications
Figure 1 Figure 2
200 V Class
0.4 2.5 4.2 X002553
120 71 120 40 50 105 20 2.3 10.5 2.5 15
0.75 5 2.1 X002554
1 − 7
1 .5 10 1.1 X002489 25
130 88 130 50 70 130 22 3. 2 9 M4 3
2 .2 15 0.71 X002490 30
3 .7 20 0.53 300-027-120 140 35
135 88 130 50 70 130 22 3 .2 M6 9 3
5 .5 30 0.35 300-027-121 150 45
7 .5 40 0.265 300-027-122 135 98 160 140 50 80 130 22 3.2 9 M5 4 50
2 7
11 60 0.18 300-027-123 165 105 185 170 75 85 160 25 2 .3 10 M6 6 65
15 80 0.13 300-027-124 75
185 100 180 195 75 80 180 25 2.3 10 M6 8
18.5 90 0.12 300-027-125 90
400 V Class
0.4 1.3 18 X002561
120 71 120 40 50 105 20 2.3 10.5 2.5 15
0.75 2.5 8.4 X002562
1 .5 5 4.2 X002563
1 − 7 M4 25
2 .2 7.5 3.6 X002564 88 70 3
130 130 50 130 22 3.2 9
3 .7 10 2.2 X002500 40
M6
5 .5 15 1.42 X002501 98 80 4 50
7.5 20 1.06 300-027-126 90 160 70 5 50
165 155 160 M4
11 30 0.7 300-027-127 105 175 85 6 65
2 75 25 2.3 10 7
15 40 0.53 300-027-128
185 100 170 185 80 180 M5 8 90
18.5 50 0.42 300-027-129
41
Zero Phase Reactor

Zero-phase reactor should match wire gauge.*
* Current values for wire gauges may vary based on electrical codes.
The table below lists selections based on Japanese electrical standards and Yaskawa s ND
rating. Contact Yaskawa for questions regarding UL.
Connection Diagram
Finemet Zero-Phase Reactor to Reduce Radio Noise Compatible with the input and output side of the drive.
Note: Finemet is a registered trademark of Hitachi Metals, Ltd. Example: Connection to output terminal Enlarged view of V/T2-phase wiring
A1000 Zero phase reactor 1st pass
2nd pass
R/L1 U/T1
Power S/L2 V/T2
supply M
3rd pass
T/L3 W/T3
4th pass
Pass each wire (U/T1, V/T2, W/T3)
through the core 4 times.
Diagram a
【Hitachi Metals, Ltd.】 A1000 A1000

Zero phase reactor Zero phase reactor
R/L1 U/T1
Power R/L1 U/T1
Power
supply S/L2 V/T2 M S/L2 V/T2 M
supply
T/L3 W/T3
T/L3 W/T3
All wires (U/T1, V/T2, W/T3) should pass Separate each terminal lead for U/T1, V/T2, and W/T3 in half,
through the four cores of the reactor in passing one half of the wires through a set of four cores and
series without winding. the other half through the other set of four cores as shown.
Diagram b Diagram c
Dimensions (mm)
131 max.
155 min.
217 max.
20±1 74 min.
124±1
78 max.
39 min.
Hex
72±1
Hex socket
socket × 3 (M5)
× 3 (M4)
7±1
50±1 4.5 dia. × 3 100±1

26 max.
42 max.
26 max.
12.5±0.3
241 max. 42 max.

5.2 dia. × 3
12.5±0.3
95 max. 181 max. 220±0.5 max.

80±1 150±1
5.5 dia. × 2
8
7
12
Weight: 195 g Weight: 620 g 14 Weight: 2260 g
Model F6045GB Model F11080GB Model F200160PB
Motor A1000 Zero Phase Reactor Motor A1000 Zero Phase Reactor
Ca- Recommended Ca- Recommended
Input Side Output Side Input Side Output Side
pacity Gauge (mm2) pacity Gauge (mm2)
(kW) Input Side Output Side Model Code No. Qty. Diagram Model Code No. Qty. Diagram (kW) Input Side Output Side Model Code No. Qty. Diagram Model Code No. Qty. Diagram
0.4 0.4
0.75 0.75
2 2 1.5
1.5 2 2
F6045GB FIL001098 1 a F6045GB FIL001098 1 a 2.2
2.2 F6045GB FIL001098 1 a F6045GB FIL001098 1 a
3.7
3.7 3.5 3.5
5.5
5.5 5.5 3.5
7.5
7.5 8 8 F11080GB FIL001097 1 a F11080GB FIL001097 1 a 5.5 5.5
11
11 14 14 15 8 F11080GB FIL001097 1 a
15 22 14 18.5
14
18.5 30 22 F6045GB FIL001098 F6045GB FIL001098 22 14
22 38 30 30 F6045GB FIL001098
F6045GB FIL001098
30 38 38 37 22 22
37 60 60 4 b 4 b 45 30 30
4 b
F11080GB FIL001097 55 38 38 4 b
45 80 80 F11080GB FIL001097
75 60 60
55 100 50 × 2P
90 80 80
75 80 × 2P 80 × 2P 110 125 125 F11080GB FIL001097 F11080GB FIL001097
90 80 × 2P 80 × 2P F200160PB 300-001-041 F200160PB 300-001-041 132 150 150
110
* * 160 200 200
*Model 2A0360: 100 × 2P, model 2A0415: 125 × 2P 185 250 250
220 100 × 2P 125 × 2P
250 125 × 2P 150 × 2P
315 4 b 4 b
80 × 4P 80 × 4P
355 F200160PB 300-001-041 F200160PB 300-001-041
450 125 × 4P 125 × 4P
500 150 × 4P 150 × 4P
560 100 × 8P 100 × 8P
8 c 8 c
42 630 125 × 8P 125 × 8P
Fuse and Fuse Holder Connection Diagram
Install a fuse to the drive input terminals to prevent damage in case a fault occurs. This example shows a DC power supply (two A1000 drives
connected in series).
Refer to the instruction manual for information on UL-approved components. For an AC power supply, see the connection diagram on page 28.
DC power supply
(converter)
Fuse U/ T1
+_ +_1 V/ T2 M
W/ T3
A1000
Fuse U/ T1
+_1 V/ T2 M
W/ T3
【Fuji Electric FA Components & Systems Co., Ltd】 A1000
Note: When connecting multiple drives together, make sure that

each drive has its own fuse. If any one fuse blows, all fuses
should be replaced.

AC Power Supply Input DC Power Supply Input AC Power Supply Input DC Power Supply Input
Model Fuse Fuse Holder Fuse Fuse Holder Model Fuse Fuse Holder Fuse Fuse Holder
CIMR-A 2A CIMR-A 4A
Rated Short- Rated Short- Rated Short- Rated Short-
Model circuit Breaking Qty. Model Qty. Model circuit Breaking Qty. Model Qty. Model circuit Breaking Qty. Model Qty. Model circuit Breaking Qty. Model Qty.

Current (kA) Current (kA) Current (kA) Current (kA)
0004 0002 CR6L-20 CR6L-20
0006 CR2LS-30 CR2LS-30 0004 CR6L-30 CR6L-30
0008 0005
3 CMS-4 3 2 CMS-4 2
0010 3 CM-1A 1 2 CM-1A 1 0007
CR2LS-50 CR2LS-50 CR6L-50 CR6L-50
0012 0009
0018 CR2LS-75 CR2LS-75 0011
0021 CR2LS-100 CR2LS-100 0018
CR6L-75 CR6L-75
0030 CR2L-125 CR2L-125 0023
0040 CR2L-150 3 CM-2A 1 CR2L-150 2 CM-2A 1 0031 CR6L-100 100 3 CMS-5 3 CR6L-100 100 2 CMS-5 2
100
0056 CR2L-175 100 CR2L-175 0038
CR6L-150 CR6L-150
0069 CR2L-225 CR2L-225 0044
0081 CR2L-260 CR2L-260 0058 CR6L-200 CR6L-200
0110 CR2L-300 CR2L-300 0072
CR6L-250 CR6L-250
0138 CR2L-350 CR2L-350 0088
0169 CR2L-400 CR2L-400 0103 CR6L-300 CR6L-300
0211 CR2L-450
3
* CR2L-450
2
* 0139 CR6L-350 CR6L-350
0250 0165 CR6L-400 CR6L-400
CR2L-600
0312 CR2L-600 0208 2
0360
0415 CS5F-800 200
CS5F-800
CS5F-1200
200
0250
0296
CS5F-600 3
* CS5F-600
*
* Manufacturer does not recommend a specific fuse holder for this fuse.
Contact the manufacturer for information on fuse dimensions.
0362
0414 CS5F-800 200
CS5F-800
200
0515 CS5F-1200
0675 CS5F-1000 CS5F-1500
0930 CS5F-1200 CS5F-1200
4
1200 CS5F-1500 CS5F-1500
Note: Always install input fuses for models CIMR-A □ 4A0930 and CIMR-A □ 4A1200.
Capacitor-Type Noise Filter
Capacitor-type noise filter exclusively designed for drive input.
The noise filter can be used in combination with a zero-phase reactor. For both 200 V and 400 V classes.
Note: The capacitor-type noise filter can be used for drive input only. Do not connect the noise filter to the output terminals.
Connection Diagram Dimensions (mm)

ELCB or MCCB 22 4.3 dia.
12
R R/L1 U/ T1
26.0±1.0 11
S S/L2 V/ T2 M
T T/L3 W/ T3
5.5
A1000
yellow/green
48.0±1.0 10.0±1.0
3XYG1003
10±2
Soldering
300 min.
【Okaya Electric Industries Co., Ltd.】 UL-1015 AWG 18

Specifications twisted cable (3 dia.)
Model Code No. Rated Capacitance Operating
3
black and yellow/green

3XYG 1003 C002889 Voltage (3 devices each) Temperature (˚C)
35.0±1.0
1 2 3
X ( connection) : 0.1 μ F ± 20 % OKAYA JAPAN
− 40 to +85 3XYG 1003

4.5
440 V 0.1 μ F×3/0.003 μ F×3
Y ( connection) : 0.003 μ F ± 20 % 440V∼50/60Hz

XYCAPACITOR -4
Note: For use with 460 V and 480 V units, contact Yaskawa directly.
43
Input Noise Filter

Base device selection on motor capacity. Connection Diagram
Noise filter A1000
ELCB or MCCB Note: Do not connect the input noise
R R U R/L1 U/T1 filter to the drive output termi-
S S V S/L2 V/T2 M nals (U, V, W). Connect in par-
T T W T/L3 W/T3 allel when using two filters.
E
Noise Filter without Case Connecting Noise Filters in Parallel to the Input or Output Side (examples shows two filters in parallel)
Junction Terminal Junction Terminal
ELCB or MCCB R1 Noise filter 1
1(R) 4(U)
R2 A1000
2(S) 5(V) Note: When wiring contactors in
3(T) 6(W) R/L1 parallel, make sure wiring
Noise Filter S1
E
S2 lengths are the same to keep
【Schaffner EMC K.K.】 S/L2 current flow even to the relay
Noise filter 2
Note: Refer to the instruction manual 1(R) 4(U) T/L3 terminals.
Noise Filter with Case for information on the CE mark T1 2(S) 5(V) T2 Noise filters and grounding wire
3(T) 6(W)
and compliance with the EMC E should be as heavy and as
directive. short as possible.
Ground
200 V Class
Noise Filter without Case Noise Filter with Case Noise Filter by Schaffner EMC K.K.
Motor
Rated Rated Rated
Capacity
Model Code No. Qty. Current Model Code No. Qty. Current Model Code No. Qty. Current
(kW)
(A) (A) (A)
0.4
0.75 LNFD-2103DY FIL000132 1 10 LNFD-2103HY FIL000140 1 10 − − − −
1.5
5.5 LNFD-2203DY FIL000134 2 40 LNFD-2203HY FIL000142 2 40 FN258L-42-07 FIL001065 1 42
7.5 2 60 2 60 FN258L-55-07 FIL001066 1 55
11 FN258L-75-34 FIL001067 1 75
3 90 3 90
15 LNFD-2303DY FIL000135 LNFD-2303HY FIL000143
FN258L-100-35 FIL001068 1 100
18.5
4 120 4 120
22 FN258L-130-35 FIL001069 1 130
30 FN258L-130-35 FIL001069 1 130
37
FN258L-180-07 FIL001070 1 180
45
55 − − − − − − − − FN359P-250-99 FIL001071 1 250
75 FN359P-400-99 FIL001073 1 400
90 FN359P-500-99 FIL001074 1 500
110 FN359P-600-99 FIL001075 1 600
400 V Class
Noise Filter without Case Noise Filter with Case Noise Filter by Schaffner EMC K.K.
Motor
Rated Rated Rated
Capacity
Model Code No. Qty. Current Model Code No. Qty. Current Model Code No. Qty. Current
(kW)
(A) (A) (A)
0.4
LNFD-4053DY FIL000144 1 5 LNFD-4053HY FIL000149 1 5
0.75
1.5
LNFD-4103DY FIL000145 1 10 LNFD-4103HY FIL000150 1 10
2.2 − − − −
3.7 LNFD-4153DY FIL000146 1 15 LNFD-4153HY FIL000151 1 15
11 LNFD-4203DY FIL000147 2 40 LNFD-4203HY FIL000152 2 40 FN258L-42-07 FIL001065 1 42
15
2 60 2 60 FN258L-55-07 FIL001066 1 55
18.5
22
LNFD-4303DY FIL000148 LNFD-4303HY FIL000153 FN258L-75-34 FIL001067 1 75
30 3 90 3 90
37 FN258L-100-35 FIL001068 1 100
45 4 120 4 120 FN258L-100-35 FIL001068 1 100
55 FN258L-130-35 FIL001069 1 130
75
FN258L-180-07 FIL001070 1 180
90
110 − − − − − − − − FN359P-300-99 FIL001072 1 300
132
FN359P-400-99 FIL001073 1 400
160
185 FN359P-500-99 FIL001074 1 500
220
FN359P-600-99 FIL001075 1 600
250
− − − − − − − −
315
FN359P-900-99 FIL001076 1 900
355
450
FN359P-600-99 FIL001075 2 1200
500
− − − − − − − −
560
FN359P-900-99 FIL001076 2 1800
44 630
Without Case Dimensions (mm)
W Terminal
W Model Dimensions (mm) Mounting Weight
A A A Code No. Figure (mm)
LNFD- Screw (kg)
U
W D H A A B M X Y
R R U
V V 2103DY FIL000132 1
D
B
S
M4 × 4,20 mm
D
B
W S W 120 80 55 108 − 68 20 9 11 0.2
T E T E 2153DY FIL000133 1
2203DY FIL000134 1 90 158 − 78 9 11 M4 × 4,20 mm 0.4
170 70 20
H max.
H max.
2303DY FIL000135 2 110 − 79 98 10 13 M4 × 6,20 mm 0.5
4053DY FIL000144 2 75 0.3
4103DY FIL000145 2 170 130 − 79 118 30 9 11 M4 × 6,30 mm
95 0.4
Figure 1 Figure 2 4153DY FIL000146 2
4203DY FIL000147 2 9 11 0.5
200 145 100 − 94 133 30 M4 × 4,30 mm
4303DY FIL000148 2 10 13 0.6
X M4×8
Terminal
close-up
Y
With Case Dimensions (mm)

W
A Terminal
Model Dimensions (mm) Weight
Code No. (mm)
LNFD- (kg)
R U
V W D H A B C X Y
D
B
S W
T
5
E 2103HY FIL000140
185 95 85 155 65 33 9 11 0.9
2153HY FIL000141
15
5 dia. 30 dia. C
12 dia. 10 15 2203HY FIL000142 9 11 1.5
H max.
240 125 100 210 95 33

2303HY FIL000143 10 13 1.6
Detailed view of A
4053HY FIL000149 1.6
C
The figure shows an example of three-phase input.

4103HY FIL000150 235 140 120 205 110 43 9 11
1.7
4153HY FIL000151
X M4×8
4203HY FIL000152 9 11
Terminal 270 155 125 240 125 43 2.2
4303HY FIL000153 10 13
close-up
Y
Manufactured by Schaffner EMC K.K. Dimensions (mm)

P
F
F
G
E
G
E
A
A
D H C
L D C
B
O
B
O
J
Figure 1 Figure 2
P
45˚±5˚
160±1
F
E
G
60±0.5 64±2
516±1.5 Weight
A
Model
564±1.5 27±0.2 100±0.5 M5×8 (kg)
D H C
L FN359P-250-99 16
275±0.5
220±0.5
L1 L1
300±1
250±1
LOAD
FN359P-300-99 16
LINE
L2 L2
B
40±0.3 ±0.5
60
O L3 L3 FN359P-400-99 18.5
E 9±0.2 dia.
J
E
210±0.5 210±0.5 3±0.2 M12 FN359P-500-99 19.5
64 ±1
FN359P-600-99 20.5
Figure 3 Figure 4 FN359P-900-99 33
Dimensions (mm) Wire Gauge Weight

Model Figure
A B C D E F G H J L O P (kg)
FN258L-42-07 70 45 AWG8 2.8
185 ± 1 500 12
FN258L-55-07 1 329 300 314 6.5 1.5 M6 AWG6 3.1
80 55
FN258L-75-34 220 − − − 4
FN258L-100-35 2 379 ± 1.5 220 90 ± 0.8 350 ± 1.2 364 65 1.5 5.5
− − −
FN258L-130-35 2 439 ± 1.5 414 6.5 3 M10 7.5
240 110 ± 0.8 400 ± 1.2 80
FN-258L-180-07 3 438 ± 1.5 413 500 4 15 50 mm2 11
FN359P- Shown in the
4 Described in Figure 4
ｰ above table.
Note: For CE Marking (EMC Directive) compliant models, contact us for inquiry.
45
Output Noise Filter

Output noise filter A
A1000 C
ELCB or MCCB IN E F
R R/L1 U/T1 14
G H
S S/L2 V/T2 25 M
T T/L3 W/T3 36
D
B
Use the mounting screw
【NEC Tokin Corporation】 as the grounding terminal.
200 V Class
Motor Rated Dimensions
Capacity Model Code No. Qty.*1 Current (mm) Terminal Weight*2
(kW) (A) A B C D E F G H (kg)
0.4
0.75 LF-310KA FIL000068 1 10 140 100 100 90 70 45 7 × ϕ 4.5 ϕ 4.5 TE-K5.5 M4 0.5
1.5
2.2
LF-320KA FIL000069 1 20 140 100 100 90 70 45 7 × ϕ 4.5 ϕ 4.5 TE-K5.5 M4 0.6
3.7
5.5
1 50
7.5
11 LF-350KA FIL000070 260 180 180 160 120 65 7 × ϕ 4.5 ϕ 4.5 TE-K22 M6 2.0
15 2 100
18.5
LF-350KA*3 FIL000070 3 150 260 180 180 160 120 65 7 × ϕ 4.5 ϕ 4.5 TE-K22 M6 2.0
22
LF-3110KB*3 FIL000076 1 110 540 340 480 300 340 240 9 × ϕ 6.5 ϕ 6.5 TE-K60 M8 19.5
LF-350KA*3 FIL000070 3 150 260 180 180 160 120 65 7 × ϕ 4.5 ϕ 4.5 TE-K22 M6 2.0
30
LF-375KB*3 FIL000075 2 150 540 320 480 300 340 240 9 × ϕ 6.5 ϕ 6.5 TE-K22 M6 12.0
37
45 LF-3110KB FIL000076 2 220 540 320 480 300 340 240 9 × ϕ 6.5 ϕ 6.5 TE-K60 M8 19.5
55
75 3 330
90 LF-3110KB FIL000076 4 440 540 320 480 300 340 240 9 × ϕ 6.5 ϕ 6.5 TE-K60 M8 19.5
110 5 550
*12:: Connect in parallel when using more than one filter.

*3: Weight of one filter.
* Either noise filter model can be used.
400 V Class
Motor Rated Dimensions
Capacity Model Code No. Qty.*1 Current (mm) Terminal Weight*2
(kW) (A) A B C D E F G H (kg)
0.4
0.75
1.5 LF-310KB FIL000071 1 10 140 100 100 90 70 45 7 × ϕ 4.5 ϕ 4.5 TE-K5.5 M4 0.5
2.2
3.7
5.5
LF-320KB FIL000072 20 0.6
7.5
1 140 100 100 90 70 45 7 × ϕ 4.5 ϕ 4.5 TE-K5.5 M4
11
LF-335KB FIL000073 35 0.8
15
18.5 LF-345KB FIL000074 1 45 260 180 180 160 120 65 7 × ϕ 4.5 ϕ 4.5 TE-K22 M6 2.0
22
LF-375KB FIL000075 1 75 540 320 480 300 340 240 9 × ϕ 6.5 ϕ 6.5 TE-K22 M6 12.0
30
37
LF-3110KB FIL000076 1 110 540 340 480 300 340 240 9 × ϕ 6.5 ϕ 6.5 TE-K60 M8 19.5
45
55 LF-375KB FIL000075 2 150 540 320 480 300 340 240 9 × ϕ 6.5 ϕ 6.5 TE-K22 M6 12.0
75
2 220
90
110
3 330
132
160
4 440
185
220 5 550
LF-3110KB FIL000076 540 320 480 300 340 240 9 × ϕ 6.5 ϕ 6.5 TE-K60 M8 19.5
250 6 660
315 7 770
355 8 880
450 9 990
500 10 1100
560 11 1210
630 12 1320
*12:: Connect in parallel when using more than one filter.

46 * Weight of one filter.
24 V Power Supply
The 24 V Power Supply Option maintains drive control circuit power in the event of a main power outage. The control circuit keeps the
network communications and I/O data operational in the event of a power outage. It supplies external power to the control circuit only.
Note: Even if a back-up power supply is used for the control circuit, the main circuit must still have power in order to change parameter settings.
The installed option adds 50 mm to
the total width of the drive.
Connection Diagram
Installed internally for models 185 kW
(CIMR-A □ 4A0414) and above. 24 V power AC input A1000
supply option R/L1 U/T1
50 mm S/L2 V/T2 M
T/L3 W/T3
CN1 CN19
+24 V power supply 24

(UL-listed class 2) 0
FE
Model Code No.

200 V Class: PS-A10LB PS-A10LB
Weight: 0.2 kg 400 V Class: PS-A10HB PS-A10HB
Momentary Power Loss Recovery Unit

Momentary Power Loss Recovery Unit 90 96
E 50 Model Code No.
N B1/P
200 V Class: P0010 P0010
ELCB or MCCB - B1 B2 400 V Class: P0020 P0020
R R/L1 U/T1 Note: Functions as a back - up power supply for
300
280
S S/L2 V/T2 M drives up to 11 kW. Allows the drive to ride

T T/L3 W/T3 through a power loss up to 2 s long. The drive
alone can continue running through a power
3-phase loss lasting 0.1 s to 1.0 s. Results may vary
power supply with drive capacity.
Mtg. screw × 4 (M6)
Weight: 2 kg
Isolator (Insulation Type DC Transmission Converter)

Input
Connection Diagram Cable Length
・4 to 20 mA: within 100 m
6 5 4 3 ・0 to 10 V: within 50 m
Terminal Description
1 Output +
2 Output −
3 −
4 Input +
7 8 1 2 5 Input −
6 Grounding
7 Power Supply
Load
Power Supply 8
Dimensions (mm)
Model GP Series Socket View of Socket Mounting
110 50 50 Terminal 23.5
10 100 40±0.2 Screws 5 4 122 max
M 3.5
2-4.5 Dia.
6 5 4 3 Holes
35.4
80
78
7 8 1 2
4
Adjuster
Positioning of the potentiometer Weight: 60 g
is changed depend on the model. Weight: 350 g
Performance Product Line

（1）Allowance ± 0.25% of output span (ambient temp.: 23˚C) Model Input Signal Output Signal Power Supply Code No.
（2）Temperature Fluctuation ± 0.25% of output span (at ± 10˚C of ambient temperature) DGP2-4-4 0 to 10 V 0 to 10 V 100 Vac CON 000019.25
（3）Aux. Power Supply Fluctuation ± 0.1% of output span (at ± 10% of aux. power supply) DGP2-4-8 0 to 10 V 4 to 20 mA 100 Vac CON 000019.26
（4）Load Resistance Fluctuation ± 0.05% of output span (in the range of load resistance) DGP2-8-4 4 to 20 mA 0 to 10 V 100 Vac CON 000019.35
（5）Output Ripple ± 0.5% P-P of output span DGP2-3-4 0 to 5 V 0 to 10 V 100 Vac CON 000019.15
（6）Response Time 0.5 s or less (time to settle to ± 1% of fi nal steady value) DGP3-4-4 0 to 10 V 0 to 10 V 200 Vac CON 000020.25
DGP3-4-8 0 to 10 V 4 to 20 mA 200 Vac CON 000020.26
（7）Withstand Voltage 2000 Vac for 60 s (between all terminals and enclosure)
DGP3-8-4 4 to 20 mA 0 to 10 V 200 Vac CON 000020.35
（8）Insulation Resistance 20 MΩ and above (using 500 Vdc megger between each terminal and enclosure)
DGP3-3-4 0 to 5 V 0 to 10 V 200 Vac CON 000020.15
47
Braking Unit, Braking Resistor, Braking Resistor Unit

Braking units come standard with 200 V and 400 V class drives 0.4 to 30 kW. If the application requires a braking resistor
or braking unit, choose from built-in and stand-alone types in accordance with motor capacity.
Stand-alone Built-in Built-in Stand-alone Stand-alone
Braking Unit
(CDBR- D) Braking Resistor Braking Resistor with Fuse Braking Resistor Unit
【CDBR series】【ERF-150WJ series】【CF120-B579 series】【LKEB series】
200 V Class Footnotes are listed on page 49.

Braking Resistor (Duty Factor: 3% ED, 10 s max.)*1
Max. A1000 Braking Unit Braking Resistor Unit (Duty Factor: 10% ED, 10 s max.)*1
Min.*2
No Fuse With Fuse
Applicable Connectable
ND/HD Model Model Model Braking Model Braking Model Resistor Braking
Motor Resistance Resistance Resistance
CIMR-A 2A CDBR- Qty. ERF-150WJ Qty. Diagram Torque*3 CF120-B579 Qty. Diagram Torque*3 LKEB- Specifications Qty. Diagram Torque*3 (Ω)
(kW) (Ω) (Ω)
(%) (%) (per unit) (%)
0.4 HD 0004 201 200 1 A 220 B 200 1 A 220 20P7 70 W 200 Ω 1 B 220 48
ND 0004
0.75 201 200 1 A 125 B 200 1 A 125 20P7 70 W 200 Ω 1 B 125 48
HD 0006
ND 0006 201 200 85 B 200 1 85 20P7 70 W 200 Ω 85
1.1 1 A A 1 B 48
HD 0008 101 100 150 C 100 1 150 21P5 260 W 100 Ω 150
ND 0008
1 .5 101 100 1 A 125 C 100 1 A 125 21P5 260 W 100 Ω 1 B 125 48
HD 0010
ND 0010 48
2.2 700 70 1 A 120 D 70 1 A 120 22P2 260 W 70 Ω 1 B 120
HD 0012 16
ND 0012
3 620 62 1 A 100 E 62 1 A 100 22P2 390 W 40 Ω 1 B 150 16
HD 0018
ND 0018
3.7 620 62 1 A 80 E 62 1 A 80 23P7 390 W 40 Ω 1 B 125 16
HD 0021
ND 0021 620 62 2 A 110 E 62 2 A 110
5.5 Built-in 25P5 520 W 30 Ω 1 B 115 16
HD 0030 − −
ND 0030 16
7.5 − − 27P5 780 W 20 Ω 1 B 125
HD 0040 9.6
ND 0040
11 − − 2011 2400 W 13.6 Ω 1 B 125 9.6
HD 0056
ND 0056
15 − − 2015 3000 W 10 Ω 1 B 125 9.6
HD 0069
ND 0069
18.5 − − 2015 3000 W 10 Ω 1 B 100 9.6
HD 0081
ND 0081 2015 3000 W 10 Ω 85 9.6
22 − − 1 B
HD 0110 2022 4800W 6.8 Ω 125 6.4
ND 0110
30 − − 2022 4800 W 6.8 Ω 1 B 90 6.4
HD 0138
ND 0138 2022 4800 W 6.8 Ω 1 B 70 6.4
37 − −
HD 0169 2037D 1 2015 3000 W 10 Ω 2 E 100 5.0
ND 0169 2037D 1 2015 3000 W 10 Ω 2 E 80 5.0
45 − −
HD 0211 2022D 2 2022 4800 W 6.8 Ω 2 D 120 6.4
ND 0211
55 2022D 2 − − 2022 4800 W 6.8 Ω 2 D 100 6.4
HD 0250
ND 0250
75 2110D 1 − − 2022 4800 W 6.8 Ω 3 E 110 1.6
HD 0312
ND 0312
90 2110D 1 − − 2022 4800 W 6.8 Ω 4 E 120 1.6
HD 0360
ND 0360
110 ND 0415 2110D 1 − − 2018 4800 W 8 Ω 5 E 100 1.6
HD 0415
Note: 1. Braking resistor (ERF-150WJ and CF120-B579) requires a separate attachment for installation. See attachment for braking resistor unit on page 53.
2. Use the retrofit attachment when replacing an older model CDBR braking unit (CDBR- B, CDBR- C). Refer to TOBP C720600 01 1000-Series Option
CDBR, LKEB Installation Manual for more details.
3. Use the External Heatsink Attachment for installation with the heatsink outside the enclosure. Refer to page 53 for details.
4. If the built-in fuse on a braking resistor blows, then the entire braking resistor should be replaced.
5. See the connection diagram on page 50.
48
400 V Class
Braking Resistor (Duty Factor: 3% ED, 10 s max.)*1
Max. A1000 Braking Unit Braking Resistor Unit (Duty Factor: 10% ED, 10 s max.)*1 Min.*2
No Fuse With Fuse
Applicable Connectable
ND/HD Model Model Model Braking Model Braking Model Resistor Braking
Motor Resistance Resistance Resistance
CIMR-A 4A CDBR- Qty. ERF-150WJ Qty. Diagram Torque*3 CF120-B579 Qty. Diagram Torque*3 LKEB- Specifications Qty. Diagram Torque*3 (Ω)
(kW) (Ω) (Ω)
(%) (%) (per unit) (%)
0.4 HD 0002 751 750 1 A 230 F 750 1 A 230 40P7 70 W 750 Ω 1 B 230 96
ND 0002
0.75 751 750 1 A 130 F 750 1 A 130 40P7 70 W 750 Ω 1 B 130 96
HD 0004
ND 0004 96
1.5 401 400 1 A 125 G 400 1 A 125 41P5 260 W 400 Ω 1 B 125
HD 0005 64
ND 0005
2.2 301 300 1 A 115 H 300 1 A 115 42P2 260 W 250 Ω 1 B 135 64
HD 0007
ND 0007 42P2 260 W 250 Ω 100 64
3 201 200 1 A 125 J 250 1 A 100 1 B
HD 0009 43P7 390 W 150 Ω 150 32
ND 0009
3.7 201 200 1 A 105 J 250 1 A 83 43P7 390W 150 Ω 1 B 135 32
HD 0011
ND 0011 201 200 2 A 135 J 250 2 A 105
5.5 45P5 520 W 100 Ω 1 B 135 32
HD 0018 − −
Built-in
ND 0018
7.5 − − 47P5 780 W 75 Ω 1 B 130 32
HD 0023
ND 0023 32
11 − − 4011 1040 W 50 Ω 1 B 135

HD 0031 20
ND 0031
15 − − 4015 1560 W 40 Ω 1 B 125 20
HD 0038
ND 0038 20
18.5 − − 4018 4800 W 32 Ω 1 B 125
HD 0044 19.2
ND 0044
22 − − 4022 4800 W 27.2 Ω 1 B 125 19.2
HD 0058
ND 0058
30 − − 4030 6000 W 20 Ω 1 B 125 19.2
HD 0072
ND 0072 4030 6000 W 20 Ω B 100 19.2
37 − − 1
HD 0088 4045D 1 4037 9600 W 16 Ω C 125 12.8
ND 0088
45 4045D 1 − − 4045 9600 W 13.6 Ω 1 C 125 12.8
HD 0103
ND 0103 4045D 1 4045 9600 W 13.6 Ω 1 C 100 12.8
55 − −
HD 0139 4030D 2 4030 6000 W 20 Ω 2 D 135 19.2
ND 0139 4030D 4030 6000 W 20 Ω 100 19.2
75 2 − − 2 D
HD 0165 4045D 4045 9600W 13.6 Ω 145 12.8
ND 0165
90 4045D 2 − − 4045 9600W 13.6 Ω 2 D 100 12.8
HD 0208
ND 0208
110 4220D 1 − − 4030 6000 W 20 Ω 3 E 100 3.2
HD 0250
ND 0250
132 4220D 1 − − 4045 9600W 13.6 Ω 4 E 140 3.2
HD 0296
ND 0296
160 4220D 1 − − 4045 9600W 13.6 Ω 4 E 140 3.2
HD 0362
ND 0362
185 4220D 1 − − 4045 9600W 13.6 Ω 4 E 120 3.2
HD 0414
ND 0414
220 4220D 1 − − 4037 9600 W 16 Ω 5 E 110 3.2
HD 0515
250 ND 0515 4220D 1 − − 4037 9600 W 16 Ω 5 E 90 3.2
315 HD 0675 4220D 2 − − 4045 9600 W 13.6 Ω 6 F 100 3.2
355 ND 0675 4220D 2 − − 4045 9600 W 13.6 Ω 8 F 120 3.2
450 HD 0930 4220D 2 − − 4037 9600 W 16 Ω 10 F 100 3.2
500 ND 0930 4220D 2 − − 4037 9600 W 16 Ω 10 F 90 3.2
560 HD 1200 4220D 3 − − 4037 9600 W 16 Ω 15 F 120 3.2
630 ND 1200 4220D 3 − − 4037 9600 W 16 Ω 15 F 100 3.2
*1 : Refers to a motor coasting to stop with a constant torque load. Constant output and regenerative braking will reduce the duty factor.
*2 : Assumes the use of a single braking unit. The braking unit should have a resistance higher than the minimum connectable resistance value and be able to
generate enough braking torque to stop the motor.
*3 : Applications with a relatively large amount of regenerative power (elevators, hoists, etc.) may require more braking power than is possible with only the standard
braking unit and braking resistor. If the braking torque exceeds the value shown in the table, the capacity of the braking resistor must be increased.
Note: 1. Braking resistor (ERF-150WJ and CF120-B579) requires a separate attachment for installation. See attachment for braking resistor unit on page 53.
2. Use the retrofit attachment when replacing an older model CDBR braking unit (CDBR- B, CDBR- C). Refer to TOBP C720600 01 1000-Series Option
CDBR, LKEB Installation Manual for more details.
3. Use the External Heatsink Attachment for installation with the heatsink outside the enclosure. Refer to page 53 for details.
4. If the built-in fuse on a braking resistor blows, then the entire braking resistor should be replaced.
5. See the connection diagram on page 50.
49
Connection Diagram Thermal relay

trip contact
Braking Braking
1 2
resistor*1, *2 Wiring sequence should shut Resistor Unit
off input power to the drive P B
when the thermal relay trips. *2, *5
ELCB or MCCB MC B1 B2
3-phase R R/L1 ELCB or MCCB MC B1 B2
power S U/T1 3-phase R R/L1
S/L2 M U/T1
supply T V/T2 power S S/L2
T/L3 W/T3 supply T V/T2 M
T/L3 W/T3
MC MB THRX OFF ON MC
MC MB
400/200 V
THRX OFF ON
*3
MC
MC SA
A1000 Ground MC SA
BRFX THRX
48 Vdc or less
Thermal relay trip contact
A1000
THRX
SA max50 mA
Multi-Function 1 2
Digital Outputs TRX BRFX SA
P1
TRX
MC MA SA SA
TRX MC MA SA
P2
TRX
Fault relay contact PC Ground
Fault relay contact
H2-02 is set to D.
Connection Diagram A Connection Diagram B
Braking
Braking Unit*2, *4 Resistor Unit *2, *5 Braking Resistor Unit Braking Resistor Unit
Overheat Contact Overheat Contact
+ B1 P
(Thermal relay trip contact) (Thermal relay trip contact)
B2 B
Level
Detector
1 2 +3 −
Braking Resistor Unit 1 2 Braking 1 2 Braking
Overheat Contact Resistor Resistor
− SC (Thermal relay trip contact) P B Unit *2, *5 P B Unit *2, *5
SB External fault input
Wiring sequence should shut A1000 − *8 + B1 B2 − *8 + B1 B2
off input power to the drive MA MB MC EA EB EC
when the thermal relay trips. IN (Slave) IN (Slave)
Fault relay Transistor short-circuit
output*7 detection output*7 *6 SC *6 SC
SB SB
ELCB or MCCB MC +3 − OUT (Master) OUT (Master)
3-phase R R/L1 U/T1 Wiring sequence should shut
power S S/L2 off input power to the drive
V/T2 M when the thermal relay trips. Ground Ground
supply T T/L3
MC MB
400/200 V
THRX OFF ON
*MC3 W/T3 IN1
IN2
OUT1
OUT2
IN1
IN2
OUT1
OUT2
Braking resistor unit MC SA A1000 Braking Unit 1*4 Braking Unit 2*4
Thermal relay trip contact THRX
1 2
SA
TRX MA MB MC EA EB EC MA MB MC EA EB EC
MC MA SA Ground Fault relay Transistor short-circuit Fault relay Transistor short-circuit
TRX output *7 detection output*7 output *7 detection output*7
Fault relay contact
(Braking Units in Parallel*9)
Connection Diagram C Connection Diagram D
Braking Resistor
Braking Unit*2, *4 Unit*2, *5 P P
P Braking Braking
+ B B
B1 +3 − 2 Resistor Resistor
1 2 Unit *2, *5
1 Unit*2, *5
Level
B2
Detector B 2 Braking Resistor Unit Overheat Contact Braking Resistor Unit Overheat Contact
1
− SC A1000 − + +0 −0
(Thermal relay trip contact)
− + +0 −0
(Thermal relay trip contact)
Wiring sequence should shut SB External Braking Resistor Unit Overheat Contact P P
off input power to the drive fault input (Thermal relay trip contact) − *8 + B1 B2 B − *8 + B1 B2 B
when the thermal relay trips. MA MB MC EA EB EC P 1 2 1 2
IN（Slave） IN（Slave）
ELCB or MCCB MC +3 −
Fault relay Transistor short-circuit *6 SC P *6 SC P
3-phase R output*7 detection output*7 B 2 Wiring sequence should SB B SB B
R/L1 U/T1 1 OUT（Master） OUT（Master）
power S S/L2 V/T2 M
shut off input power to
the drive when the
2 1 2
supply T T/L3 W/T3
MC MB
400/200 V
THRX OFF ON
*3
MC
P thermal relay trips.
（Ground）（Ground）
IN1 OUT1 IN1 OUT1
MC SA A1000 IN2 IN2
Thermal relay trip contact B 2 OUT2 OUT2
THRX 1
1 2
SA
Braking Unit1*4 Braking Unit2*4
TRX
（Ground）
MC MA
TRX
SA MA MB MC EA EB EC MA MB MC EA EB EC
（3-unit multiple connection） Fault relay Transistor short-circuit Fault relay Transistor short-circuit
Fault relay contact
output*7 detection output*7 output*7 detection output*7
（Braking Units in Parallel*9）
Connection Diagram E Connection Diagram F
*1: using
Set L8-01 to 1 to enable braking resistor overload protection in the drive when
braking resistors, and set a multi-function input to Braking Resistor
CDBR) to drives with a built-in braking transistor (200 V/400 V 30 kW or less),
connect the B1 terminal of the drive to the positive terminal of the braking
Fault (H1- = D). Wiring sequence should shut off power to the drive when resistor unit and connect the negative terminal of the drive to the negative
a fault output is triggered. CF120-B579 series does not need to be wired an terminal of the braking resistor unit. The B2 terminal is not used in this case.
external sequence.
* :
5 Be sure to protect non-Yaskawa braking resistors by thermal overload relay.
* 2: Set L3-04 to 0 or 3 to disable stall prevention when using a braking unit, a
braking resistor, or a braking resistor unit. If the function is enabled under these
* :
6 When using more than one braking unit connected in parallel, set one of the
braking units as the master, and set the others as slaves.
conditions, the drive may not stop within the specified deceleration time.
* 7: Connect fault relay output to multi-function digital input S (External Fault).
* :
3 200 V class drives do not require a control circuit transformer. Connect the CDBR transistor short-circuit detection output to disconnect main
* :
4 Set L8-55 to 0 to disable the protection function for the built-in braking input power to the drive.
transistor when using a regenerative unit or another type of braking option in
* :
8 Connect directly to the drive terminal or install a terminal block.
lieu of the built-in braking transistor. If the protection function is enabled under
these conditions, it may cause a braking resistor fault (rF).
* 9 Contact your Yaskawa or nearest agent when using the braking unit (CDBR-
:
D) with earlier models (CDBR- B or CDBR- C).
When connecting a separately-installed type braking resistor unit (model
* 10: Connect fault relay output to multi-function digital input S (External Fault).
50
Model, Code No.
Braking Unit
Model Protection Model Protection
Code No. Code No.
CDBR- Design CDBR- Design
IP20 100-091-707 IP20 100-091-717
2022D 4030D
UL Type 1 100-091-754 UL Type 1 100-091-764
IP20 100-091-712 IP20 100-091-722
2037D 4045D
UL Type 1 100-091-759 UL Type 1 100-091-769
IP00 100-091-524 IP00 100-091-526
2110D 4220D
UL Type 1 100-091-530 UL Type 1 100-091-532
Dimensions (mm)
Braking Unit
Open-Chassis【IP20】 Open-Chassis【IP00】
CDBR-2022D，-2037D，-4030D，-4045D CDBR-2110D，-4220D
Mtg. hole × 4 (M5)

100 min.

100 min.
105
Mtg. hole × 4 (M4)
294
279
136
150
50 min. 53.5
7.5
110
6
100 min.
120 7.9 max. 7.9 max. 2 .5 1.6 100 min.

175 200
7
48
30 min. 30 min. 157
30 min. 30 min.
Weight: 2 kg Weight: 7.5 kg
Enclosure Panel【UL Type 1】
CDBR-2022D，-2037D，-4030D，-4045D CDBR-2110D，-4220D
100 min.
Mtg. hole × 4 (M5)

100 min.
Mtg. hole × 4 (M4)

279
294
367
136
150
190
7.5
50 min.
6
100 min.
40
7
100 min.
73
48 110 53.5 1.6

5.4 max. 180 5.4 max. 2.5 200
105 157
30 min. 120 30 min. 30 min.
30 min.
Weight: 2.3 kg Weight: 8.3 kg
Note: Remove the top protective cover to convert the drive to a UL Type 1 enclosure when installing the drive in a control panel.
Heat Loss
Model CDBR- Heat Loss（W）
2022D 27
2037D 38
2110D 152
4030D 24
4045D 36
4220D 152
51
Braking Resistor
A separate attachment is need. Contact Yaskawa for details. 182
The following attachment can be used to install to the drive. 165
4.2
+15
150 250 −0
182
5 4
3 2 RISK OF BURN
WARNING SURFACE B1
28
1
170 B2
150 4.2 Dia.

5
5±0.5 42
250±5
20
44
1 .2
1.2
13 Weight: 0.2 kg Weight: 0.256 kg
(All ERF-150WJ series models) (All CF120-B579 series models)
ERF-150WJ series CF120-B579 series
Braking Resistor Unit (stand-alone)
200 min.
Mtg. screw
150 min.
Mtg. screw
D
B
D
B
150 min.
C C
50 min. 50 min.
200 min.
30 min. A 30 min. A
150 260
Figure 1 Figure 2
Applicable Braking Resistor Dimensions (mm) Allowable Average Applicable Braking Resistor Dimensions (mm) Allowable Average
Weight Weight
Voltage Unit Model Figure MTG Power Consumption Voltage Unit Model Figure MTG Power Consumption
A B C D (kg) A B C D (kg)
Class LKEB- Screw (W) Class LKEB- Screw (W)
20P7 1 105 275 50 260 M5 × 3 3.0 30 40P7 1 105 275 50 260 M5 × 3 3.0 30
21P5 4.5 60 41P5 4.5 60
22P2 1 130 350 75 335 M5 × 4 4.5 89 42P2 1 130 350 75 335 M5 × 4 4.5 89
23P7 5.0 150 43P7 5.0 150
200 V 25P5 7.5 220 45P5 7.5 220
1 250 350 200 335 M6 × 4 1 250 350 200 335 M6 × 4
Class 27P5 8.5 300 47P5 8.5 300
400 V
2011 266 246 10 440 4011 16 440
Class 2 350 412 330 325 M6 × 4
2015 356 336 15 600 4015 18 600
2 543 340 M8 × 4
2018 19 740 4018 19 740
446 426 2 446 543 426 340 M8 × 4
2022 19 880 4022 19 880
4030 356 336 25 1200
4037 2 956 740 M8 × 4 33 1500
446 426
4045 33 1800
52
Attachment for Braking Resistor
Attachment increases the depth
of the drive.
28 mm
260 mm
m
140 m
Model Code No.

EZZ020805A 100-048-123

Braking Unit External Heatsink Attachment
Use the external heatsink attachment for installation with the Dimensions (mm)
heatsink outside the enclosure.
Model Model
Attachment
CDBR- (Code No.)
2022D
166
180
2037D EZZ021711A
4030D (100-066-355)
4045D
108
120 109 48
Braking Unit Panel Cutout Dimensions

W1 Drill hole × 4 (d)
W1 4-d1
H1
H3
H2
H
H1
H2
H
W3
W2 W2
W W
Modification Figure1 Modification Figure2
Model Modification Dimensions (mm)

CDBR- Figure W* H* W1 W2 W3 H1 H2 H3 d1
2022D 1 172 226 108 118 84 166 172 152 M4
2037D 1 172 226 108 118 84 166 172 152 M4
2110D 2 175 294 110 159 − 279 257.8 − M5
4030D 1 172 226 108 118 84 166 172 152 M4
4045D 1 172 226 108 118 84 166 172 152 M4
4220D 2 175 294 110 159 − 279 257.8 − M5
* : The following W, H information is the size when in installing the gasket.
53
VS System Module (Power Supply Capacity 6 VA or less)

Name (Model) Exterior Function
Provides smooth changes in speed during start, stop, and when sudden changes in the
Soft Starter A speed reference would otherwise impact the load. Independent accel/decel settings, an
(JGSM-01) output signal during speed changes, and fast stopping features are included. Capable
Soft Starter B of detecting zero speed and motor direction.
(JGSM-02) Acceleration and deceleration time setting ranges:
Soft Starter A: 1.5 to 30 s Soft Starter B: 5 to 90 s
Ratio Setter A Converts the current signal 4 to 20 mA to a voltage signal 0 to 10 V.

(JGSM-03) Sets five types of ratios and biases.
Ratio Setter B Converts the frequency signal 0 to 2 kHz to a voltage signal 0 to 10 V.

(JGSM-04) Sets five types of ratios and biases.
Ratio Setter C Converts a 200 Vac signal, a 30 Vac tachgenerator signal, or a 10 Vdc signal to DC
(JGSM-17) for use as the speed reference. Allows the user to set up to five ratios and biases.
Follower Ratio Setter Converts a frequency signal from a tachgenerator for voltage input. Allows the user to
(JGSM-05) set up to five ratios and biases.
Converts a self-synchronizing signal from YVGC-500W*1, then converts that signal to DC

Position Controller
voltage proportional to the rotational angle. Equipped with a signal mixing function to mini-
(JGSM-06)
mize deviation from the reference signal.
PID Controller Independently sets ratio gain, integral, and differential time for the simple process control.
(JGSM-07) Integral reset, stepless operation, and wind-up functions are available.
Preamplifier Amplifies both the power of DC input signal and output of snap - in function mod -
(JGSM-09- □□ )*2 ules JZSP -11 to 16 * 1 .
UP/DOWN Setter Executes UP or DOWN command remotely or from several locations by lowering
(JGSM-10B) or raising the reference voltage.
Operational Amplifier Required operational circuits are provided through a range of operational impedanc-
(JGSM-12- □□ )*3 es.
Signal Selector A Consists of power supply circuit and two relay circuits. Used as a selector circuit of
(JGSM-13) control signals.
Signal Selector B Contains three relay circuits to switch between control signals.
(JGSM-14) Must be using in combination with JGSM-13, which supplies power.
54
Name (Model) Appearance Function
Detects signal levels for DC voltage, current, AC tachogenerator, or frequency refer-

Comparator
ence and compares them with two preset levels. The snap-in module*1 is used to drive
(JGSM-15- □□ )*2
relays and output contact signals.
Converts DC voltage into a 4 to 20 mA current signal for use with other monitoring de-
V/I Converter
vices. A snap-in module*1 can also be added to monitor frequency or provide feedback
(JGSM-16- □□ )*2
for a tachogenerator.
D/A Converter Converts BCD 3-digit or 12-bit binary digital signals to analog signals of − 10 to +10 V
with high accuracy.
(JGSM-18)
Model JGSM-18: For BCD 3-digit input signals
(JGSM-19)
Model JGSM-19: For 12-bit binary signals
Static potentiometer can be used in combination with remote setting device JGSM-
Static Potentiometer 10B for the following applications:
Maintain reference values despite power loss
(JGSM-21 D/A Converter)
Set deceleration times externally
(JGSM-22 Controller)
Operate as a soft-starter for an analog signal

JGSM-21 and JGSM-22 must be used in combination with one another.
*12:: Offered as a standard Yaskawa product.

*3: shows model number of VS snap-in function modules. Refer to the VS Snap-in Module list for more information.
*Note: Bothindicates impedance class.
200 V/220 V at 50 Hz/60 Hz are available as standard models. Use a transformer for other power supplies with a capacity of 6 VA or less.
VS System Module Dimensions (mm) VS Snap-in Module List

2-4.8 dia. mtg. hole Application Name Model
357 Short-circuit of mounting connector of VS snap-in module Short-circuit PC board JZSP-00
2468
Buffer accel/decel operation Soft starter JZSP-12
Conversion of the current signal 4 to 20 mA, such as for
I/V converter JZSP-13
process adjusting meters, to a voltage signal of 0 to 10 V.
185
200
Conversion of the frequency signal 0 to 2 kHz to a

f/V converter JZSP-14
voltage signal 0 to 10 V.
Sequence operation with main unit Tachogenerator follower JZSP-15
JZSP-16
9 11 13 15
10 12 14 JZSP-16-01
Amplify or reduce signal Signal mixer
35 JZSP-16-02
50 140 max. Weight: 0.8 kg
JZSP-16-03
55
LCD Operator
An LCD operator with a 6-digit display makes it easy to check the necessary information.
Includes a copy function for saving drive settings.
Dimensions (mm)
12. 2 1.6 Mtg. hole, M3 × 2 screw ( depth 5)
Model Code No.

JVOP-180 100-142-915
78
90
15
LCD operator 60 7. 9 44
50 min. Communication cable connector
Operator Extension Cable

Enables remote operation
Model Code No.

WV001 (1 m) WV001
WV003 (3 m) WV003
Note: Never use this cable for connecting the drive
to a PC. Doing so may damage the PC. LED operator (standard) LCD operator
（JVOP-182）（JVOP-180）
LCD operator
extension cable
Operator Mounting Bracket

This bracket is required to mount the LED or LCD operator outside an enclosure panel.
Item Model Code No. Installation Notes
M4×10
truss head
screw
M3×6
pan head
screw
For use with holes

EZZ020642A 100-039-992
through the panel
Installation 13.9
Support Set A 50 min.
M4 nut
M3×6
pan head
screw
For use with panel

EZZ020642B 100-039-993
mounted threaded studs
Note: If weld studs are

on the back of the
panel, use the In-
Installation 13.9
stallation Support
Support Set B 50 min. Set B.
56
USB Copy Unit (Model: JVOP-181)
Copy parameter settings in a single step, then transfer those settings to another drive. Connects to
the RJ-45 port on the drive and to the USB port of a PC.
Connection
Communications port for drive
RJ-45 cable (1 m)
RJ-45 port
LED (COM/ERR)
Copy key
Verify key ・DriveWizardPlus
・DriveWorksEZ
Read key
Lock key
USB port

USB cable (30 cm)
Model Code No.
JVOP-181 100-038-281
Note: JVOP-181 is a set consisting of a USB copy unit, RJ-45 cable, and USB cable. Connecting to a PC
Note: 1. You can also use a commercially available
Specifications USB 2.0 cable (with A-B connectors) for the
Item Specifications USB cable.
2. No USB cable is needed to copy parameters
LAN (RJ-45) Connect to the drive. to other drives.
Port
USB (Ver.2.0 compatible) Connect to the PC as required.
Power Supply Supplied from a PC or the drive
Windows 2000
Operating OS compatible with 32-bit memory
Windows XP
System
OS compatible with 32-bit and 64-bit memory Windows 7
Memory Memorizes the parameters for one drive.
Dimensions 30 (W) × 80 (H) × 20 (D) mm
Accessories RJ-45 Cable (1 m), USB Cable (30 cm)
Note: 1. Drives must have identical software versions to copy parameters settings.
2. Requires a USB driver.
You can download the driver for free from Yaskawa s product and technical
information website (http://www.e-mechatronics.com).
3. Parameter copy function disabled when connected to a PC.
PC Cable
Cable to connect the drive to a PC with DriveWizard Plus or DriveWorksEZ installed.
Use a commercially available USB 2.0 cable (A-B connectors, max. 3 m).
Connection
Communications port for drive

・DriveWizardPlus
・DriveWorksEZ
(max. 3 m)
Connecting to a PC
Note: 1. DriveWizard Plus is a PC software package for managing parameters and Note: You can also use the JVOP-181 copy
functions in Yaskawa drives. To order this software, contact your Yaskawa. unit and cables as the USB cable.
DriveWorksEZ is the software for creating custom application programs for
the drive through visual programming. To order this software, contact our
sales representative.
2. Requires USB driver. You can download the driver for free from Yaskawa s
product and technical information website (http://www.e-mechatronics.com).
57
Frequency Meter/Current Meter

Dimensions (mm)
Model Code No. 12.5 25 12 65
Scale-75 Hz full-scale: DCF-6A FM000065 0.5 10 24 24
Scale-60/120 Hz full-scale: DCF-6A FM000085 24 24 4-4 dia.
Scale-5 A full-scale: DCF-6A DCF-6A-5A
24
52 dia.
24 24
60
53
24
Terminal screw × 2 (M4) Panel Cut-Out
Note: DCF-6A specifications are 3 V, 1 mA, and 3 k Ω in- Mtg. bolt × 4 (M3)
ner impedance. Because the A1000 multi-function Weight: 0.3 kg
analog monitor output default setting is 0 to 10 V,
set frequency meter adjusting potentiometer (20
k Ω ) or parameter H4-02 (analog monitor output
gain) within the range of 0 to 3 V.
Variable Resistor Board (installed to drive terminals)

Connection Diagram
Model Code No.
RH
Meter scale 20 k Ω ETX3120
Weight: 20 g
Frequency Setting Potentiometer/Frequency Meter Adjusting Potentiometer

Dimensions (mm)
Model Code No. 2.5±1
2.8±0.2 dia.
RV30YN20S 2 k Ω RH000739 M9 P 0.75
4.5 dia.
30±2 dia.
RV30YN20S 20 k Ω RH000850
12
12
25
6 dia. +−00.1
10 dia.
1 3
2
1.5 10±1
60˚ Panel Cut-Out
17.5 20±1
Weight: 0.2 kg
Control Dial for Frequency Setting Potentiometer/Frequency Meter Adjusting Potentiometer

Dimensions (mm)
Model Code No.
CM-3S HLNZ-0036
29.9
23
16.1
15
7.5
Shaft, 6 dia.
3.4
26.1
32.8
Meter Plate for Frequency Setting Potentiometer/Frequency Meter Adjusting Potentiometer

Dimensions (mm)
Model Code No.
4 6
NPJT41561-1 NPJT41561-1 3.6 dia.
3 7
12
9.5 dia.
45
1 9
0 10
45
58
Output Voltage Meter
Dimensions (mm)
Model Code No. 12.5 30 12 120
Scale-300 V full-scale 0.5 10 50 50
VM000481
(Rectification Type Class 2.5: SCF-12NH) 50 50
4-5 dia.
Scale-600 V full-scale
45
VM000502
85 dia.
35 45
(Rectification Type Class 2.5: SCF-12NH)
100
87
35
Terminal screw × 2 (M4) Panel Cut-out
Mtg. bolt × 4 (M3)
Weight: 0.3 kg
Potential Transformer
Dimensions (mm)
Model Code No. Terminal block Insulation cap
with cover Red: Drive input
600 V meter for voltage transformer (M3 screw) Blue: Drive output
100-011-486
UPN-B 440/110 V (400/100 V)
U Vu v E Nameplate
Note: For use with a standard voltage regulator. Ground
A standard voltage regulator may not match the terminal

drive output voltage. Select a regulator specifical-
ly designed for the drive output (100-011-486), or
a voltmeter that does not use a transformer and
101±2
offers direct read out.
76±2
approx. 85
1.6
56±1 31 90
86±2 102±2
Mtg. hole
× 4 (M6)
Weight: 2.2 kg
59
Application Notes
Application Notes
Selection Yaskawa recommends lowering the carrier frequency,
■ Installing a Reactor particularly when audible noise is not a concern. The
An AC or DC reactor can be used for the following situa- user can also choose to reduce the load, increase the
tions: acceleration and deceleration times, or switch to a larger
when the power supply is 600 kVA or more. drive. This will help keep peak current levels under
to smooth peak current that results from switching a 150%. Be sure to check the peak current levels when
phase advance capacitor. starting and stopping repeatedly during the initial test
to improve the power supply power factor. run, and make adjustments accordingly.
A DC reactor comes standard with 200 V and 400 V class For cranes and other applications using the inching
models with a capacity of 22 kW or more. function in which the drives starts and stops the motor
Use an AC reactor when also connecting a thyristor repeatedly, Yaskawa recommends the following steps to
converter to the ensure torque levels:
Power Supply Capacity (kVA)
4000 Reactor required

same power sup- Select a large enough drive so that peak current levels
ply system, re - remain below 150%.
600
gardless of the Reactor The drive should be one frame size larger than the motor.
unnecessary
conditions of the 0 60 400
power supply. Drive Capacity (kVA) ■ As the carrier frequency of the drive is increased above
the factory default setting, the drive s rated output current
■ Drive Capacity must be derated. Refer to the instruction manual of the
Make sure that the motor s rated current is less than the drive for details on this function.
drive s output current. When running a specialized mo-
tor or more than one motor in parallel from a single Installation
drive, the capacity of the drive should be larger than 1.1 ■ Enclosure Panels
times of the total motor rated current. Keep the drive in a clean environment by either select-
ing an area free of airborne dust, lint, oil mist, corrosive
■ Starting Torque gas, and flammable gas, or install the drive in an enclo-
The overload rating for the drive determines the starting sure panel. Leave the required space between the
and accelerating characteristics of the motor. Expect drives to provide for cooling, and take steps to ensure
lower torque than when running from line power. To get that the ambient temperature remains within allowable
more starting torque, use a larger drive or increase both limits. Keep flammable materials away from the drive. If
the motor and drive capacity. the drive must be used in an area where it is subjected
to oil mist and excessive vibration, protective designs
■ Emergency Stop are available. Contact Yaskawa for details.
When the drive faults out, a protective circuit is activated
and drive output is shut off. This, however, does not stop ■ Installation Direction
the motor immediately. Some type of mechanical brake The drive should be installed upright as specified in the
may be needed if it is necessary to halt the motor faster manual.
than the Fast Stop function is able to.
■ External Heatsink
■ Options When using an external heatsink, UL compliance
The B1, B2, − , +1, +2 and +3 terminals are used to connect requires that exposed capacitors in the main circuit are
optional devices. Connect only A1000-compatible devices. covered to prevent injury to surrounding personnel.
The portion of the external heatsink that projects out can
■ Repetitive Starting/Stopping either be protected with the enclosure, or with the
Cranes (hoists), elevators, punching presses, and other appropriate capacitor cover after drive installation is
such applications with frequent starts and stops often complete. Contact Yaskawa for information on capacitor
exceed 150% of their rated current values. Heat stress covers.
generated from repetitive high current can shorten the
lifespan of the IGBTs. The expected lifespan for the IG- Settings
BTs is about 8 million start and stop cycles with a 2 kHz ■ Use V/f Control when running multiple induction motors
60 carrier frequency and a 150% peak current. at the same time.
■ If using Open Loop Vector Control designed for perma- ■ Wiring
nent magnet motors, make sure that the proper motor Make sure to use ring tongue solderless terminals when
code has been set to parameter E5-01 before perform- wiring UL/cUL-certified drives. Use the tools recom-
ing a trial run. mended by the terminal manufacturer for caulking.
■ Upper Limits ■ Transporting the Drive

Because the drive is capable of running the motor at up Never steam clean the drive. During transport, keep
to 400 Hz, be sure to set the upper limit for the frequen- the drive from coming into contact with salts, fluorine,
cy to control the maximum speed. The default setting for bromine and other such harmful chemicals.
the maximum output frequency is 60 Hz. When hoisting a CIMR-A 4A0930 or a CIMR-A 4A1200
drive while it is upright, be sure to re-fit the eyebolts on
■ DC Injection Braking its top panel and suspend it at four points at the top.
Motor overheat can result if there is too much current used Otherwise the drive can fall and cause injuries. Refer to
during DC Injection Braking, or if the time for DC Injection the instruction manual for details.
Braking is too long.
Peripheral Devices
■ Acceleration/Deceleration Times ■ Installing a Ground Fault Interruptor or an MCCB
Acceleration and deceleration times are affected by how
Application Notes
Be sure to install an MCCB or an ELCB that is recommended by
much torque the motor generates, the load torque, and Yaskawa at the power supply side of the drive to protect internal
the inertia moment (GD2/4). Set a longer accel/decel circuitry. With a CIMR-A 4A0930 or a CIMR-A 4A1200, be
time when Stall Prevention is enabled. The accel/decel sure to install a fuse in conjunction with the MCCB or ELCB.
times are lengthened for as long as the Stall Prevention The type of MCCB is selected depending on the power supply
function is operating. For faster acceleration and decel- power factor (power supply voltage, output frequency, load charac-
eration, increase the capacity of the drive. teristics, etc.). Sometimes a fairly large MCCB may be required due
to the affects of harmonic current on operating characteristics. If
General Handling you do not use a recommended ELCB, use one fitted for harmonic
■ Wiring Check suppression measures and designed specifically for drives. A mal-
Never short the drive output terminals or apply voltage to function may occur due to high-frequency leakage current, so the
output terminals (U/T1, V/T2, W/T3), as this can cause se- rated current of the ELCB must be 30 mA or higher per drive unit. If
rious damage to the drive. Doing so will destroy the drive. a malfunction occurs in an ELCB without any countermeasures, re-
Be sure to perform a final check of all sequence wiring and duce the carrier frequency of the drive, replace the ELCB with one
other connections before turning the power on. Make sure that has countermeasures against high frequency, or use an ELCB
there are no short circuits on the control terminals (+V, AC, which has a rated current of 200 mA or higher per drive unit.
etc.), as this could damage the drive. Select an MCCB or an ELCB with a rated capacity greater than
the short-circuit current for the power supply. For a fairly large
■ Magnetic Contactor Installation power supply transformer, a fuse can be added to the ELCB or
Avoid switching a magnetic contactor on the power sup- MCCB in order to handle the short-circuit current level.
ply side more frequently than once every 30 minutes.
Frequent switching can cause damage to the drive. ■ Magnetic Contactor for Input Power
Use a magnetic contactor (MC) to ensure that power to
■ Inspection and Maintenance the drive can be completely shut off when necessary.
After shutting off the drive, make sure the CHARGE light The MC should be wired so that it opens when a fault
has gone out completely before preforming any inspec- output terminal is triggered.
tion or maintenance. Residual voltage in drive capaci- Even though an MC is designed to switch to a momen-
tors can cause serious electric shock. tary power loss, frequent MC use can damage other
The heatsink can become quite hot during operation, and components. Avoid switching the MC more than once
proper precautions should be taken to prevent burns. When every 30 minutes. The MC will not be activated after a
replacing the cooling fan, shut off the power and wait at least momentary power loss if using the operator keypad to
15 minutes to be sure that the heatsink has cooled down. run the drive. This is because the drive is unable to re-
start automatically when set for LOCAL. Although the
drive can be stopped by using an MC installed on the
power supply side, the drive cannot stop the motor in a 61
Application Notes (continued)
controlled fashion, and it will simply coast to stop. If a ■ Wire Gauges and Wiring Distance
braking resistor or dynamic braking unit has been in- Motor torque can suffer as a result of voltage loss
stalled, be sure to set up a sequence that opens the MC across a long cable running between the drive and mo-
with a thermal protector switch connected to the braking tor, especially when there is low frequency output. Make
resistor device. sure that a large enough wire gauge is used.
The optional LCD operator requires a proprietary cable
■ Magnetic Contactor for Motor to connect to the drive. If an analog signal is used to op-
As a general principle, the user should avoid opening and erate the drive via the input terminals, make sure that
closing the magnetic contactor between the motor and the the wire between the analog operator and the drive is no
drive during run. Doing so can cause high peak currents and longer than 50 m, and that it is properly separated from
overcurrent faults. If magnetic contactors are used to bypass the main circuit wiring. Use reinforced circuitry (main cir-
the drive by connecting the motor to the power supply direct- cuit and relay sequence circuitry) to prevent inductance
ly, make sure to close the bypass only after the drive is from surrounding devices. To run the drive with a fre-
stopped and fully disconnected from the motor. The Speed quency potentiometer via the external terminals, use
Search function can be used to start a coasting motor. twisted shielded pair cables and ground the shield.
Use an MC with delayed release if momentary power loss is Shield ground terminal
Pulse train input
RP Pulse train input (max 32 kHz)
a concern. 0 to 10 V
+V Power supply +10.5 Vdc, max. 20 mA
3 Analog input 1
2 kΩ A1 (Frequency reference bias) DIP Switch S1
Main frequency 1 2 0 to 10 Vdc (20 kΩ)
■ Motor Thermal Over Load Relay Installation 4 to 20 mA V I
reference A2 Analog input 2
(Frequency reference bias)
Although the drive comes with built in electrothermal pro- 0 to 10 Vdc (20 kΩ)
A3 4 to 20 mA / 0 to 20 mA 250 Ω
0 to 10 V ( )
tection to prevent damage from overheat, a thermal relay Analog Input 3
AC (Aux. frequency reference)
should be connected between the drive and each motor if 0 V 0 to 10 Vdc (20 kΩ)
−V Power supply, −10.5 Vdc, max. 20 mA
running several motors from the same drive. For a multi-
pole motor or some other type of non-standard motor, Yas- ■ Counteracting Noise
kawa recommends using an external thermal relay ap- Because A1000 is designed with PWM control, a low
propriate for the motor. Be sure to disable the motor carrier frequency tends to create more motor flux noise
protection selection parameter (L1-01 = 0), and set the than using a higher carrier frequency. Keep the following
thermal relay or thermal protection value to 1.1 times the points in mind when considering how to reduce motor
motor rated current listed on the motor nameplate. noise:
When long motor cables and high carrier frequency are Lowering the carrier frequency (C6-02) minimizes the
used, nuisance tripping of the thermal relay may occur effects of noise.
due to increased leakage current. Therefore, reduce the A line noise filter can reduce the affects on AM radio
carrier frequency or increase the tripping level of the frequencies and poor sensor performance. See Op-
thermal overload relay. tions and Peripheral Devices on page 34.
Make sure the distance between signal and power lines is at
■ Improving the Power Factor least 10 cm (up to 30 cm is preferable), and use twisted pair
Installing a DC or AC reactor to the input side of the drive can cable to prevent induction noise from the drive power lines.
help improve the power factor.
Refrain from using a capacitor or surge absorber on the output noise filter noise filter
side as a way of improving the power factor, because high-fre-

quency contents contents on the output side can lead to damage power
supply
Drive M
from overheat. This can also lead to problems with overcurrent.

Keep signal lines
and power lines at
least 30 cm
■ Radio Frequency Interference apart Use twisted shielded
sensor power supply pair cable
Drive output contains high-frequency contents that can affect +
sensor
−
the performance of surrounding electronic instruments such
as an AM radio. These problems can be prevented by install- Connect a 0.1 μ F capacitor
ing a noise filter, as well as by using a properly grounded met- Connect shielded line to a neutral line (not to ground)
al conduit to separate wiring between the drive and motor.

<Provided by JEMA>
62
■ Leakage Current
Notes on Motor Operation
High-frequency leakage current passes through stray capaci-
Using a Standard Motor
tance that exists between the power lines to the drive,
■ Low Speed Range
ground, and the motor lines. Consider using the following pe- 25% ED (or 15 min.)
There is a greater amount of
ripheral devices to prevent problems with leakage current. 40% ED (or 20 min.)
loss when operating a motor 60% ED (or 40 min.)
Problem Solution
100
using an drive than when 90
Lower the carrier frequency set to 80
Torque (%)
parameter C6-02. running directly from line 70
60
Ground
MCCB is mistakenly Try using a component designed to 50
Leakage
triggered minimize harmonic distortion for
power. With a drive, the mo- Continuous operation
Current
the MCCB such as the NV series tor can become quite hot
by Mitsubishi.
due to the poor ability to cool 3 6 20 60
Thermal relay connected Frequency (Hz)
Current
to the external terminals
Lower the carrier frequency set to the motor at low speeds. The
Leakage parameter C6-02. Allowable Load Characteristics
Between
is mistakenly triggered
Use the drive's built-in thermal load torque should be re- for a Yaskawa Motor
by harmonics in the
Lines motor protection function. duced accordingly at low speeds. The figure above shows
leakage current
the allowable load characteristics for a Yaskawa standard
motor. A motor designed specifically for operation with a
The following table shows the guidelines for the set value
drive should be used when 100% continuous torque is
of the carrier frequency relative to the wiring distance be-
needed at low speeds.
tween the drive and the motor when using V/f control.
Application Notes
Wiring Distance* 50 m or less 100 m or less 100 m or more
C6-02: 1 to A 1, 2, 7 to A 1, 7 to A ■ Insulation Tolerance
Carrier Frequency Selection (15 kHz or less) (5 kHz or less) (2 kHz or less)
Consider voltage tolerance levels and insulation in appli-
* When a single drive is used to run multiple motors, the length of the motor cable cations with an input voltage of over 440 V or particularly
should be calculated as the total distance between the drive and each motor. long wiring distances.
When the wiring distance exceeds 100 m, use the drive
observing the following conditions. ■ High Speed Operation
Select V/f control mode (A1-02=0) Problems may occur with the motor bearings and dy-
To start a coasting motor namic balance in applications operating at over 60 Hz.
a Use the current detection type (b3-24=0) when using
) Contact Yaskawa for consultation.
the speed search function, or
b Set the DC injection braking time at start (b2-03=0.01
) ■ Torque Characteristics
to 10.00 sec) to stop a coasting motor and restart it. Torque characteristics differ when operating directly
More than one synchronous motor cannot be connected from line power. The user should have a full understand-
to a single drive. The maximum wiring distance between ing of the load torque characteristics for the application.
the drive and the synchronous motor must be 100 m.
■ Vibration and Shock
A1000 lets the user choose between high carrier PWM
control and low carrier PWM. Selecting high carrier
PWM can help reduce motor oscillation. Keep the fol-
lowing points in mind when using high carrier PWM:
(1) Resonance
Take particular caution when using a variable speed
drive for an application that is conventionally run
from line power at a constant speed. Shock-absorb-
ing rubber should be installed around the base of the
motor and the Jump Frequency selection should be
enabled to prevent resonance.
(2) Any imperfection on a rotating body increases vibration
with speed.
Caution should be taken when operating above the
motor rated speed.
63
Application Notes (continued)
(3) Subsynchronous Resonance ■ At start, a synchronous motor may rotate slightly in the
Subsynchronous resonance may occur in fans, blow- opposite direction of the Run command depending on
ers, turbines, and other applications with high load in- parameter settings and motor type.
ertia, as well as in motors with a relatively long shaft.
Yaskawa recommends using Closed Loop Vector Con- ■ The amount of starting torque that can be generated dif-
trol for such applications. fers by the type of motor being used. Set up the motor
with the drive after verifying the starting torque, allow-
■ Audible Noise able load characteristics, impact load tolerance, and
Noise created during run varies by the carrier frequency speed control range.
setting. Using a high carrier frequency creates about as
much noise as running from line power. Operating ■ Even with a braking resistor, braking torque is less than
above the rated speed (i.e., above 60 Hz), however, 125% when running between 20% to 100% speed, and
can create unpleasant motor noise. falls to less than half the braking torque when running at
less than 20% speed.
Using a Synchronous Motor
■ Please contact us for consultation when using a syn- ■ The allowable load inertia moment is 50 times less than
chronous motor not already approved by Yaskawa. the motor inertia moment. Contact Yaskawa concerning
applications with a larger inertia moment.
■ For applications running a synchronous motor with the
drive set for Heavy Duty performance (particularly hoists ■ When using a holding brake, release the brake prior to
and conveyor applications), use Closed Loop Vector starting the motor. Failure to set the proper timing can
Control for PM (A1-02 = 7). Contact Yaskawa for details. result in speed loss. Conveyor, transport, and hoist ap-
plications using a holding brake should run an IPM mo-
■ When the power to a drive running a PM motor is shut tor in Closed Loop Vector Control for PM motors.
off, voltage continues to be generated at the motor ter-
minals while the motor coasts to stop. Take the precau- ■ To restart a coasting motor rotating at over 200 Hz, use the
tions described below to prevent shock and injury: Short Circuit Braking* function to first bring the motor to a
Applications where the machine can still rotate even stop. Short Circuit Braking requires a special braking resistor.
though the drive has fully stopped should have a load Speed Search can be used to restart a coasting motor
switch installed to the output side of the drive. Yaskawa rotating slower than 200 Hz. If the motor cable is rela-
recommends manual load switches from the AICUT LB tively long, however, the motor should instead be
Series by Aichi Electric Works Co., Ltd. stopped using Short Circuit Braking and then restarted.
Do not connect to a load that could potentially rotate * Short Circuit Braking creates a short-circuit in the motor windings to forc-
ibly stop a coasting motor.
the motor faster than the maximum allowable speed
even when the drive has been shut off. Applications with Specialized Motors
Wait at least one minute after opening the load switch
on the output side before inspecting the drive or per- ■ Multi-Pole Motor
forming any maintenance. Because the rated current will differ from a standard mo-
Do not open and close the load switch while the motor tor, be sure to check the maximum current when select-
is running, as this can damage the drive. ing a drive. Always stop the motor before switching be-
If the motor is coasting, make sure the power to the tween the number of motor poles. If a regenerative
drive is turned on and the drive output has completely overvoltage fault occurs or if overcurrent protection is
stopped before closing the load switch. triggered, the motor will coast to stop.
■ Synchronous motors cannot be started directly from ■ Submersible Motor
line power. Applications requiring line power to start Because motor rated current is greater than a standard
should use an induction motor with the drive. motor, select the drive capacity accordingly. Be sure to
use a large enough motor cable to avoid decreasing the
■ A single drive is not capable of running multiple synchro- maximum torque level on account of voltage drop
nous motors at the same time. Use a standard induction caused by a long motor cable.
motor for such setups.
64
■ Explosion-Proof Motor Power Driven Machinery (decelerators, belts, chains, etc.)
Both the motor and drive need to be tested together to Continuous operation at low speeds wears on the lubri-
be certified as explosion-proof. The drive is not for ex- cating material used in gear box type systems to accel-
plosion proof areas. erate and decelerate power driven machinery. Caution
An explosion-proof pulse generators (PG) is used for an should also be taken when operating at speeds above
explosion-proof with voltage tolerance. Use a specially the rated machine speed due to noise and shortened
designed pulse coupler between the drive and the PG performance life.
when wiring.
■ Geared Motor
Continuous operation specifications differ by the manu-
facturer of the lubricant. Due to potential problems of
gear damage when operating at low speeds, be sure to
select the proper lubricant. Consult with the manufactur-
er for applications that require speeds greater than the
rated speed range of the motor or gear box.
■ Single-Phase Motor
Application Notes
Variable speed drives are not designed for operating
single phase motors. Using a capacitor to start the mo-
tor causes high-frequency current to flow into the ca-
pacitors, potentially causing damage. A split - phase
start or a repulsion start can end up burning out the
starter coils because the internal centrifugal switch is not
activated. A1000 is for use only with 3-phase motors.
■ Uras Vibrator
Uras vibrator is a vibration motor that gets power from
centrifugal force by rotating unbalanced weights on both
ends of the shaft. Make the following considerations
when selecting a drive for use with an Uras vibrator:
(1) Uras vibrator should be used within the drive rated
frequency
(2) Use V/f Control
(3) Increase the acceleration time five to fifteen times
longer than would normally be used due to the high
amount of load inertia of an Uras vibrator
Note : A drive with a different capacity must be selected if the
acceleration time is less than 5 s.
(4) Drive may have trouble starting due to undertorque

that results from erratic torque (static friction torque
at start)
■ Motor with Brake

Caution should be taken when using a drive to operate
a motor with a built-in holding brake. If the brake is con-
nected to the output side of the drive, it may not release
at start due to low voltage levels. A separate power sup-
ply should be installed for the motor brake. Motors with
a built-in brake tend to generate a fair amount of noise
when running at low speeds.
65
YASKAWA AC Drive Series
Capacity Range (kW)

Name Feature 0.1 1 10 100 300 630 Outline
Three-Phase Ultra-small body enables side-by-side installation. Compact design of enclosure panel
0.1 5.5 Easy operation with the /Potentiometer Option Unit
200 V Class
The noise-suppressing Swing PWM system reduces harsh sound.
Compact The full-range fully-automatic torque boost function provides high torque output.
Single-Phase
J1000 V/f Control 0.1 2.2 (100%/1.5 Hz，150%/3 Hz)
200 V Class
AC Drive The Stall Prevention function and the momentary power loss ride-thru ensure continuous
operation, regardless of load/power supply fluctuations or momentary power loss.
Three-Phase The Overexcitation braking function enables rapid braking, without using a braking
0.2 5.5
400 V Class resistor.
Three-Phase Small body and high performance (Current vector control)

0.1 18.5 For both induction motors and synchronous motors (IPMM/SPMM)
200 V Class
High starting torque: 200%/0.5 Hz*
Compact Vector Single-Phase Torque limit function
V1000 0.1 3.7
Control AC Drive 200 V Class
* At Heavy Duty rating, for induction motors with 3.7 kW or lower
Application-specific function selection for simplified optimum setup
Three-Phase Easy maintenance using the detachable terminal block with the
0.2 18.5
400 V Class parameter backup function
Three-Phase For both induction motors and synchronous motors (IPMM/SPMM)

0.4 110 High starting torque IPM motor without a motor encoder: 0 r/min
200 V Class
Advanced Vector 200% torque
A1000
Control AC Drive Application preset function selection for simplified optimum setup
Three-Phase
0.4 630 Easy maintenance using the detachable terminal block with the
400 V Class parameter backup function
The 400 V class uses 3-level control for a more perfect output waveform.
Three-Phase Open Loop Vector control ensures 150% or higher torque during
General Purpose
General-purpose 0.4 110

200 V Class operation at 0.3 Hz. Flux Vector Control provides a high torque of
Inverter With 150% at zero speed.
Varispeed G7 Advanced Easy maintenance and inspection using the detachable control
Vector Control circuit terminals and the detachable cooling fan.
Three-Phase Software for various applications (for crane, hoist, etc.)
Minimal Noise 0.4 300
400 V Class The Auto-Tuning function upgrades all types of general motors to be
compatible with high-performance drives.
Drastically reduced power supply harmonics and improved
Three-Phase harmonics environment.
5.5 55* Power regeneration function with even greater energy efficiency.
200 V Class
Low Harmonics All-in-one design accomplished reduced wiring and saving space.
Motor drive state-of-the-art technology, induction motor and,
U1000 Regenerative
of course, synchronous motor drive are also possible.
Matrix Converter Commercial power supply can be switched without peripheral
Three-Phase
2.2 500* phase detectors and contactors.
400 V Class The visual programming function DriveWorksEZ is installed as
standard, easily customized, and can be freely used on a PC.
Three-Phase Grade higher than IE3 efficiency class saves energy during operation.
0.4 15 V1000 drives combined with compact ECOiPM motors make more
Compact and 200 V Class
compact and lighter drive systems.
ECOiPM Drive Energy
Less maintenance because bearing grease life is approx. three times
Efficiency Drives Three-Phase longer compared to use with induction motors.
0.4 15
400 V Class Improved reliability with elimination of an encoder of precision device.
V1000 drives combined with super compact V1000pico motors make

more compact and lighter drive systems.
Super Compact Applicable in locations subject to water jets or abrasive powder with
V1000pico Three-Phase
and Environmentally 0.1 0.75 its protective enclosure rated IP65 or higher.
Drive 200 V Class
Drives Improved reliability with elimination of an encoder of precision device.
Use of V1000 drives, which can control not only induction motors but
also synchronous motors, brings the uniformity of your stock.
Cutting-edge drive technology allows L1000A to run a newly installed

gearless synchronous motor, or a refurbished geared induction motor.
Three-Phase This minimizes equipment required for your application.
1.5 110
200 V Class Interfaces to match gearless, synchronous motors and every type of
absolute encoder.
Special Use
Even without a load sensor, high-performance torque compensation

Elevator
L1000A and high-resolution absolute encoder eliminate rollback when the
Applications
brake is released.
Output interrupt Satisfies safety requirements and Ensures a reliable
Three-Phase elevator system.
1.5 110
400 V Class Rescue Operation switches to backup battery or UPS in case of a
power outage.
All standard models are compliant with the Europe s RoHS directive.
*: Units are displayed in kW. When selecting a model, make sure that the rated output current is higher than the motor rating current.
66
Global Service Network
5 Frankfurt
8 9
Boston
1 New Jersey
San Francisco Chicago Seoul
Ohio
Los Angeles North Carolina Tokyo
10 Shanghai
11 Taipei 6 7
15 Hanoi
2 Mexico City Bangalore 14 13 Bangkok
Ho Chi Minh
4 Bogota Singapore
12
Jakarta
16
3 São Paulo
Region Service Area Service Location Service Agency Telephone/Fax
Chicago (HQ)
Los Angeles
San Francisco Headquarters
U.S.A. New Jersey ●
1 YASKAWA AMERICA INC. ☎ +1-847-887-7000
North +1-847-887-7310
YASKAWA AC Drive Series / Global Service Network

Boston FAX
America Ohio
North Carolina
☎ +52-555-660-5553
Mexico Mexico City ●
2 PILLAR MEXICANA. S.A. DE C.V.
FAX +52-555-651-5573
☎ +55-11-3585-1100
South America São Paulo ●
3 YASKAWA ELÉTRICO DO BRASIL LTDA.
South FAX +55-11-5581-8795
America ☎ +57-1-428-4225
Colombia Bogota ●
4 VARIADORES LTD.A.
FAX +57-1-428-2173
Europe, ☎ +49-6196-569-300
Europe Frankfurt ●
5 YASKAWA EUROPE GmbH
South Africa FAX +49-6196-569-398
6 YASKAWA ELECTRIC CORPORATION
● ☎ +81-3-5402-4502
Tokyo, (Manufacturing, sales) FAX +81-3-5402-4580
Japan
offices nationwide 7 YASKAWA ELECTRIC ENGINEERING CORPORATION
● ☎ +81-4-2931-1810
(After-sales service) FAX +81-4-2931-1811
●
8 YASKAWA ELECTRIC KOREA CORPORATION ☎ +82-2-784-7844
(Sales) FAX +82-2-784-8495
South Korea Seoul
●
9 YASKAWA ENGINEERING KOREA CORPORATION ☎ +82-2-3775-0337
(After-sales service) FAX +82-2-3775-0338
Beijing, Guangzhou,
10 YASKAWA ELECTRIC (CHINA) CO., LTD.
☎ +86-21-5385-2200
China ●
Shanghai FAX +86-21-5385-3299
☎ +886-2-2502-5003
Taiwan Taipei ●
11 YASKAWA ELECTRIC TAIWAN CORPORATION
FAX +886-2-2505-1280
Asia +65-6282-3003
☎
Singapore Singapore 12 YASKAWA ELECTRIC (SINGAPORE) PTE. LTD.
●
FAX +65-6289-3003
13 YASKAWA ELECTRIC (THAILAND) CO., LTD.
☎ +66-2-017-0099
Thailand Bangkok ●
FAX +66-2-017-0090
☎ +84-8-3822-8680
Ho Chi Minh
FAX +84-8-3822-8780
Vietnam ●
14 YASKAWA ELECTRIC VIETNAM CO., LTD.
☎ +84-4-3634-3953
Hanoi
FAX +84-4-3654-3954
☎ +91-80-4244-1900
India Bangalore ●
15 YASKAWA INDIA PRIVATE LIMITED
FAX +91-80-4244-1901
☎ +62-21-2982-6470
Indonesia Jakarta ●
16 PT. YASKAWA ELECTRIC INDONESIA
FAX +62-21-2982-6471
Oceania Australia 12 ).
Contact to service agency in Singapore (●
67
A1000
DRIVE CENTER (INVERTER PLANT)

2-13-1, Nishimiyaichi, Yukuhashi, Fukuoka, 824-8511, Japan
Phone +81-930-25-2548 Fax +81-930-25-3431
http://www.yaskawa.co.jp
YASKAWA ELECTRIC CORPORATION
New Pier Takeshiba South Tower, 1-16-1, Kaigan, Minatoku, Tokyo, 105-6891, Japan
Phone +81-3-5402-4502 Fax +81-3-5402-4580
http://www.yaskawa.co.jp
YASKAWA AMERICA, INC.
2121, Norman Drive South, Waukegan, IL 60085, U.S.A.
Phone +1-800-YASKAWA (927-5292) or +1-847-887-7000 Fax +1-847-887-7310
http://www.yaskawa.com
YASKAWA ELÉTRICO DO BRASIL LTDA.
777, Avenida Piraporinha, Diadema, São Paulo, 09950-000, Brasil
Phone +55-11-3585-1100 Fax +55-11-3585-1187
http://www.yaskawa.com.br
YASKAWA EUROPE GmbH
185, Hauptstraβe, Eschborn, 65760, Germany
Phone +49-6196-569-300 Fax +49-6196-569-398
http://www.yaskawa.eu.com
YASKAWA ELECTRIC KOREA CORPORATION
9F, Kyobo Securities Bldg., 26-4, Yeouido-dong, Yeongdeungpo-gu, Seoul, 150-737, Korea
Phone +82-2-784-7844 Fax +82-2-784-8495
http://www.yaskawa.co.kr
YASKAWA ELECTRIC (SINGAPORE) PTE. LTD.
151, Lorong Chuan, #04-02A, New Tech Park 556741, Singapore
Phone +65-6282-3003 Fax +65-6289-3003
http://www.yaskawa.com.sg
YASKAWA ELECTRIC (THAILAND) CO., LTD.
59, 1st-5th Floor, Flourish Building, Soi Ratchadapisek 18, Ratchadapisek Road, Huaykwang, Bangkok 10310, Thailand
Phone: +66-2-017-0099 Fax: +66-2-017-0799
http://www.yaskawa.co.th
PT. YASKAWA ELECTRIC INDONESIA
Secure Building-Gedung B Lantai Dasar & Lantai 1 Jl. Raya Protokol Halim Perdanakusuma, Jakarta 13610, Indonesia
Phone +62-21-2982-6470 Fax +62-21-2982-6471
http://www.yaskawa.co.id/
YASKAWA ELETRIC VIETNAM CO., LTD HO CHI MINH OFFICE

Suite 1904A, 19th Floor Centec Tower, 72-74 Nguyen Thi Minh Khai Street, Ward 6, District 3, Ho Chi Minh City, Vietnam
Phone +84-8-3822-8680 Fax +84-8-3822-8780
YASKAWA ELETRIC VIETNAM CO., LTD HA NOI OFFICE

2nd Floor, Somerset Hoa Binh Hanoi, No. 106, Hoang Quoc Viet Street, Cau Giay District, Hanoi, Vietnam
Phone +84-4-3634-3953 Fax +84-4-3654-3954
YASKAWA ELECTRIC (CHINA) CO., LTD.
22F, One Corporate Avenue, No.222, Hubin Road, Shanghai, 200021, China
Phone +86-21-5385-2200 Fax +86-21-5385-3299
http://www.yaskawa.com.cn
YASKAWA ELECTRIC (CHINA) CO., LTD. BEIJING OFFICE
Room 1011, Tower W3 Oriental Plaza, No.1 East Chang An Ave.,
Dong Cheng District, Beijing, 100738, China
Phone +86-10-8518-4086 Fax +86-10-8518-4082
YASKAWA ELECTRIC TAIWAN CORPORATION
9F, 16, Nanking E. Rd., Sec. 3, Taipei, 104, Taiwan
Phone +886-2-2502-5003 Fax +886-2-2505-1280
http://www.yaskawa-taiwan.com.tw
YASKAWA INDIA PRIVATE LIMITED
#17/A, Electronics City, Hosur Road, Bangalore, 560 100 (Karnataka), India
Phone +91-80-4244-1900 Fax +91-80-4244-1901
http://www.yaskawaindia.in
In the event that the end user of this product is to be the military and said product is to
be employed in any weapons systems or the manufacture thereof, the export will fall
under the relevant regulations as stipulated in the Foreign Exchange and Foreign
Trade Regulations. Therefore, be sure to follow all procedures and submit all relevant
documentation according to any and all rules, regulations and laws that may apply.
Specifications are subject to change without notice for ongoing product modifications
and improvements.
© 2008-2016 YASKAWA ELECTRIC CORPORATION
LITERATURE NO. KAEP C710616 22K <10>-0

Published in Japan August 2016
16-6-22

A1000 Catalogue

Uploaded by

Copyright:

Available Formats

A1000 Catalogue

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

A1000 Catalogue

Uploaded by

Copyright:

Available Formats

YASKAWA AC Drive

High Performance Vector Control

Features for Every Application 10

Standard Connection Diagram 28

Peripheral Devices and Options 34

YASKAWA AC Drive Series 66

Global Service Network 67

The Most Advanced Drive Technology Cutting-Edge Torque Characteristics

*12:: Achieving this torque output requires a larger capacity drive.

Powerful torque at 0 Hz 200

without motor feedback. A1000

use of a motor encoder. 85

Precision positioning functionality without an up- 50

No PG needed High-performance current vector control achieves

Open Loop Vector Control

* Achieving this torque output requires a larger capacity drive.

Tuning the Motor Power supply

Smooth Operation Motor speed

Comparing torque ripple at zero speed (Closed Loop Vector)

The drive may trip depending on load conditions,

Ride through power loss for up to 2 seconds.*

Suppressing Power Supply Harmonics

A : Induction motor + A1000 Standard

Annual reduction in CO2

Controlled ramp to stop

Finless models* also available. current.

* For models 400 V class 22 to 75 kW.

Program a customized sequence HVAC Fan Pump

Compressor Conveyor Hoist, Crane

A1000 IPM motor Time (s)

01 Water Supply Pump A1-02 Control mode selection

ing WV103 cable used 05 Air Compressor C6-01 ND/HD Selection

Previous A1000 Terminal Block

All Major Serial Network Protocols Frequency Reference Selection 1

RS-422/485 (MEMOBUS/Modbus at 115.2 kbps) standard on all models.

Long Life Performance Drive Replacement Function

Previous model A1000

A1000 is loaded with functions to match

2 Switch Between Motors

3 Powerful Starting Torque

5 Visual Programming with DriveWorksEZ

6 Performance Life Diagnostic Features

certain components such as the cooling fan or capacitors.

7 Terminal Block with Parameter Backup Function

2 Yaskawa offers a compact solution for both drive and motor.

・Dual ratings Accel/Decel Energy Fault

4 Output Power Pulse Monitor

6 24 V Control Power Supply Option

7 Terminal Block with Parameter Backup Function

8 Performance Life Diagnostic Features

9 Low Harmonic Distortion

A1000 is loaded with functions to match

Maintenance Drive Zero Servo

5 Current Vector Control

detection and torque limits offered by current vector control.

6 Performance Life Diagnostic Features

7 Terminal Block with Parameter Backup Function

6 24 V Control Power Supply Option

8 Performance Life Diagnostic Features

9 Low Harmonic Distortion

E3-08 Motor 2 Mid Output Freq. Voltage 0.0 to 255.05 5

E3-10 Motor 2 Min. Output Freq. Voltage 0.0 to 255.05 5