4007ES Fire Control Panels

UL, ULC Listed; Automatic Extinguishing, Deluge and Preaction

FM, NYC Fire Dept Approved* Sprinkler System Releasing Control

Features
Actuator
Releasing control using the Simplex® 4007ES Agent Agent
source discharge
Fire Alarm Control Panel to provide**: Actuator path
 Coverage for multiple areas of Automatic Extinguishing Control
Release and/or Deluge and Preaction Sprinkler System Circuit
Coil supervisory
Release including audible escalation of events module
 Control of compatible Listed/Approved valves and
C O IL S U P E R V IS IO N M O D U L E ( 2 A M P ) 2 0 8 1 - 9 0 4 6
RED IN S T A L L A T IO N IN S T R U C T IO N S 5 7 4 - 4 Y3 E7 LR E V
NA C + M A IN T A IN 1 /4 " S E P A R A T IO N
B E T W E E N P O W E R L IM IT E D
( R E D /B L K ) A N D N O N P O W E R S
L IM IT E D ( Y E L /B L K ) W IR IN G
D AT E COD E: 5 19 - 95 8
BL K
N A C-
BLK S IM P L E X T IM E R E C O R D E R C O .G A R D N E R M A .U S A

actuators
 Releasing appliance circuits (RACs) by connecting Release
Notification appliance circuits (NACs) to Suppression appliance circuit
Release Peripherals for actuator supervision and control
 Additional actuator circuit control NACs are available Maintenance NORMAL

Disconnect Switch
using 4009 IDNet Addressable NAC Extenders with
0

DISC./
1
DISABLE

(with indicator lamp)

FIRE SUPPRESSION
DISCONNECT / DISABLE

Suppression Release Peripherals Power for

Audible Escalation of Events: indicator lamp
(if required)
 Temporal or 20 bpm march time pattern for first FIRE
RELEASING
cross-zone alarm; 120 bpm march time pattern to Suppression
DEVICE
Release Peripheral
indicate releasing timer active; On steady to indicate
releasing timer expired and actuator is activated
 Requires NACs dedicated to conventional horn control Typical addressable
initiating devices
(not SmartSync operation) with strobes controlled on IDNet
separate NACs FIRE SUPPRESSION
SYSTEM ABORT
communications

4009 IDNet NAC Extenders provide: PUSH AND HOLD

- IDN E T
+I D N E T
IN +
IN -

Dedicated
 Up to eight NACs for notification requirements and input
MANUAL
RELEASE

NAC circuit
to suppression release peripherals, controlled via IDNet
4090-9005/-9006 Suppression Release Peripheral
(SRP) with Dual Command Control:
 Dual command control requires IDNet and an activated
NAC to initiate release
 NAC provides wiring supervision to the actuator SUPPRESSION RELEASE PANEL
CAUTION: This Control Unit has been arranged for releasing
service. Disable all releasing device circuits prior to servicing.

including monitoring of coil continuity and short circuit

supervision to the coil supervision module
Suppression Release Peripheral control features:
 An on-board DC-DC regulator compensates for voltage
drops to the peripheral and ensures proper control circuit
voltage over a wide operating range 4007ES Control Panel with
 Provides a single RAC for control of actuators for up to Suppression Release Appliqué
2 A using a 3 A NAC input (1 A using a 2 A NAC input)
4007ES Series Releasing Control Typical Block Diagram
Related system components:
 4007ES Series control panel with Releasing Appliqué
 Dedicated NAC output from 4007ES (or compatible
Introduction
NAC Extender) When combined with Suppression Release Peripherals, the
 Coil supervision module, one per RAC 4007ES series fire alarm control panel provides actuator
 Maintenance Switch, one per RAC supervision and control for use in automatic extinguishing,
 Abort Switch and deluge or preaction releasing systems. Hazard area
4007ES Listings reference: initiating and notification devices are controlled using either
 UL 864 - Control Units, System (UOJZ); Control Unit conventional or addressable circuits per standard 4007ES
Accessories, System, Fire Alarm (UOXX); ; Control capabilities. The necessary releasing system logic is
Units, Releasing Device Service (SYZV) implemented within the 4007ES control panel as required for
 UL 2017 - Emergency Alarm System Control Units (CO the local application.
detection), (FSZI)
 ULC-S559 - Central Station Fire Alarm System Units
(DAYRC)
 ULC-S527 - Control Units, System, Fire Alarm * NYC Fire Dept COA #6191A. Additional listings may be applicable; contact your local Simplex
(UOJZC); Control Unit Accessories, System, Fire Alarm product supplier for the latest status. Listings and approvals under Simplex Time Recorder Co. are
(UOXXC); Control Units, Releasing Device Service the property of Tyco Safety Products Westminster.
(SYZVC) ** Release Control operation described in this document is also available with 4007ES Control
Panels with software revision 3.03 or higher. Refer to data sheet S4007-0001 for model 4007ES
control panel details including IDNet communications information.
S4007-0003-6 7/2018
Automatic Extinguishing Release Systems Releasing System Requirements (Continued)
These systems automatically activate electrically 5. FM Approved Automatic Extinguishing Release
controlled actuators for the release of a fire extinguishing requires secondary standby to be a minimum of
agent (such as dry chemical, water spray, foam, CO2, or 24 hours with 5 minutes of alarm. Actuators must be
clean agent) in response to fire detection device inputs as electrically compatible.
determined by programming of the host fire alarm control 6. FM Approved Deluge and Preaction Sprinkler
panel. operation requires that: initiating device circuits be
Automatic Extinguishing Release System Panels Class A and wired to Listed/Approved devices;
are required to have a minimum of 24 hours of standby standby power capacity must be a minimum of 90
power. Initiating devices must be Listed/Approved for the hours with 10 minutes of alarm; and that compatible
application, and may be wired either Class A or B. Automatic Water Control Valves must be used. (Refer
Control actuators must be electrically compatible with the to actuator list on page 7.)
control panel circuits and power supplies, and are wired 7. Maintenance Switches, one per RAC, are required
Class B to provide coil supervision. per NFPA 72, the National Fire Alarm and Signaling
Code to allow the system to be tested or serviced
Deluge or Preaction Sprinkler Systems without actuating the fire suppression systems. Their
use may not be allowed in some jurisdictions, always
These systems automatically activate water control
confirm local requirements. When used, Simplex
actuators in response to fire detection device inputs.
Maintenance Switches are required to ensure that
Deluge Sprinkler Systems employ open sprinkler operation initiates a supervisory condition.
heads and provide water flow when the fire detection
8. Abort Switches are available when abort operation is
system activates a common automatic water control
required. When used, connect to an addressable
actuator. They are used to deliver water simultaneously
Supervised IAM model 4090-9001 or similar
through all of the system sprinkler heads. This type of
addressable adapter module. The Simplex abort switch
system is applicable where the immediate application of
and the IAM mount in a single gang box, 2-1/2”
large quantities of water over large areas is the proper fire
minimum depth.
response.
9. Addressable Manual Releasing Stations are used to
Preaction Sprinkler Systems are similar to deluge
initiate activation of the releasing actuators with the
systems except that normally closed sprinkler heads are
appropriate time delay implemented by the fire alarm
used and supervisory air pressure is maintained in the
control panel.
pipe. Operation requires both an activated sprinkler head
and an activated fire alarm initiating device with specific 10. Notification Requirements. Each hazard area
programming determined at the host fire alarm control typically requires general audible and visible fire
panel. alarm notification and additional dedicated NACs for
area releasing status notification. Suppression
Releasing System Requirements releasing is compatible with conventional panel
mounted NACs as well as for use with the 4009 IDNet
1. Releasing actuators are controlled from a NAC Extender.
Suppression Release Peripheral (4090-9005 or
4090-9006). Connections are 2-wire, Class B releasing 11. Additional Suppression Release Peripheral
circuits with only one 24 VDC actuator per circuit. Reference. Refer to Installation Instructions 579-385.
Where applicable, two 12 VDC actuators in series or
one 12 VDC actuator per circuit may be used (refer to
the actuator manufacturer's installation documentation Additional Releasing Systems Reference
for additional details and requirements). For additional information, refer to Factory Mutual
2. Coil Supervision Module 2081-9046 must be wired Research Corporation (FMRC) “FMRC Approval Guide,”
electrically before the actuator and located in the FM Approval standard “Automatic Releases for Preaction
actuator wiring junction box. (Refer to diagram on and Deluge Sprinkler Systems.”
page 5.) The connected RAC provides continuity
supervision of the actuator coil and wiring and Please note that proper operation of releasing control
provides short circuit supervision to the coil systems requires that the system design, installation, and
supervision module. maintenance be performed correctly and in accordance
3. Cross-zoning or other alarm initiation logic per with all applicable local and national codes, and
system requirements, is to be implemented by equipment manufacturer’s instructions. No liability for
programming at the fire alarm control panel. total system operation is assumed or implied.
4. UL Listed Automatic Extinguishing Releasing
operation requires that: battery standby must be a
minimum of 24 hours with 5 minutes of alarm and that
listed actuators are used, refer to list on page 6.

2 S4007-0003-6 7/2018
Product Selection

4007ES Releasing Control System Modules

Model Description Reference
Required, one per RAC, mounts in the releasing actuator wiring
2081-9046 Coil Supervision Module
junction box; see specifications section for details
One per RAC; flush or surface mount; indicator lamp models
2080-Series* Maintenance Switches
require separate 24 VDC wiring

2080-9056* Flush mount As required, connects via an IDNet addressable interface module;
Abort Switch mounted on a single gang stainless steel plate; installation
2080-9057* Surface mount requires a single gang box, 2-1/2” (64 mm) minimum depth

* Refer to data sheet S2080-0010 for Abort and Maintenance switch details.

Releasing Appliqués, Required for 4007ES Suppression Releasing Applications

Model Description
4007-9830 English
Suppression Releasing Appliqué; field applied
4007-9830CAF French

Suppression Release Peripheral and Accessories

Model Description Reference
Basic Suppression Release Peripheral on
4090-9005 Requires mounting box 2975-9227, ordered separately
mounting plate
Suppression Release Peripheral mounted in
4090-9006 Includes LED indicator on front of door
NEMA 1 red box; required for ULC listing
NEMA 1 red mounting box; required for
2975-9227
4090-9005
These items are included with model 4090-9006
Red LED IDNet communications indicator
4090-9812
option kit; mounts on door of 2975-9227 box
Refer to control panel programming manual 579-1167 for further information on suppression release panel programing.

Additional Product Data Sheet Reference

Subject Data Sheet Subject Data Sheet

Releasing System Abort and Maintenance
S2080-0010 Addressable Zone Adapter Modules S4090-0003
Switches
Addressable Manual Stations for Releasing
S4099-0006 TrueAlarm Sensors and Bases S4098-0019
Applications
Addressable Manual Stations for Standard
S4099-0005 TrueAlert Electronic Horns S4901-0010
Applications
4007ES Hybrid Fire Detection and Control
S4007-0001 TrueAlert Non-Addressable Strobes (V/O) S4906-0001
Panel
4007ES Fire Detection and Control Panel S4007-0002 TrueAlert Non-Addressable 4-Wire Horn/Strobes (A/V) S4903-0011
Supervised IAM S4090-0001

Contact your local Simplex product supplier for additional information on compatible IDNet addressable devices and TrueAlert
notification appliances.

3 S4007-0003-6 7/2018
4007ES Hybrid Panel Releasing System One-Line Connection Reference

FIRE
RELEASING NORMAL

DEVICE
DISC./ RED
C O IL S U P E R V IS IO N M O D U L E ( 2 A M P ) 2 0 8 1 - 9 0 4 6
IN S T A L L A T IO N IN S T R U C T IO N S 5 7 4 - 4 Y3 E7 LR E V
1 NA C + M A IN T A IN 1 /4 " S E P A R A T IO N

DISABLE B E T W E E N P O W E R L IM IT E D
( R E D /B L K ) A N D N O N P O W E R S
L IM IT E D ( Y E L /B L K ) W IR IN G
D A T E COD E : 5 1 9- 9 5 8
BL K
N A C-
BL K S IM P L E X T IM E R E C O R D E R C O .G A R D N E R M A .U S A

FIRE SUPPRESSION
DISCONNECT / DISABLE

FIRE SUPPRESSION
SYSTEM ABORT

- ID N E T IN +
+ ID N E T IN -

PUSH AND HOLD

MANUAL
RELEASE

FIRE
RELEASING NORMAL

DEVICE
0

DISC./ RED
C O IL S U P E R V IS IO N M O D U L E ( 2 A M P ) 2 0 8 1 - 9 0 4 6
IN S T A L L A T IO N IN S T R U C T IO N S 5 7 4 - 4 Y3 E7 LR E V
1 NA C + M A IN T A IN 1 /4 " S E P A R A T IO N

DISABLE B E T W E E N P O W E R L IM IT E D
( R E D /B L K ) A N D N O N P O W E R S
L IM IT E D ( Y E L /B L K ) W IR IN G
D A T E COD E : 5 1 9- 9 5 8
BL K
N A C-
BL K S IM P L E X T IM E R E C O R D E R C O .G A R D N E R M A .U S A

FIRE SUPPRESSION
FIRE SUPPRESSION DISCONNECT / DISABLE
SYSTEM ABORT

- ID N E T IN +
+ID N E T
IN -

PUSH AND HOLD

MANUAL
RELEASE

4 S4007-0003-6 7/2018
4007ES Fully Addressable Panel Releasing System One-Line Connection Reference

HAZARD AREA 2
Maintenance
Disconnect Actuator Control Circuit
Switch with
lamp Agent
4090-9005/-9006 Suppression Coil supervisory
FIRE source
Release Peripheral module
RELEASING NORMAL

Actuator
0

DEVICE
DISC./ RED
C O IL S U P E R V IS IO N M O D U L E ( 2 A M P ) 2 0 8 1 - 9 0 4 6
IN S T A L L A T IO N IN S T R U C T IO N S 5 7 4 - 4 Y3 E7 LR E V
1 NAC+ M A IN T A IN 1 /4 " S E P A R A T IO N

DISABLE B E T W E E N P O W E R L IM IT E D
( R E D /B L K ) A N D N O N P O W E R S
L IM IT E D ( Y E L /B L K ) W IR IN G
D A T E C OD E : 5 1 9 - 9 5 8
BL K
N A C-
BL K S IM P L E X T IM E R E C O R D E R C O .G A R D N E R M A .U S A

FIRE SUPPRESSION
DISCONNECT / DISABLE

Agent discharge path

4009 NAC Communications

IDNet communications

FIRE SUPPRESSION
SYSTEM ABORT

- ID N E T
IN +
+ ID N E T
IN -

MANUAL
RELEASE
PUSH AND HOLD
IDNAC for addressable horn and strobe
control (from 4007ES Control Panel)

24 VDC for Maintenance Disconnect

4009 IDNet NAC Extender status indicator

HAZARD AREA 1
Maintenance
Disconnect Actuator Control Circuit
Switch
IDNet communications Agent
without lamp Coil supervisory
(shown as Class B wiring) FIRE source
module
RELEASING
DEVICE 0

1
RED
NAC+

N A C-
BL K
C O IL S U P E R V IS IO N M O D U L E ( 2 A M P ) 2 0 8 1 - 9 0 4 6
IN S T A L L A T IO N IN S T R U C T IO N S 5 7 4 - 4 Y3 E7 LR E V
M A IN T A IN 1 /4 " S E P A R A T IO N
B E T W E E N P O W E R L IM IT E D
( R E D /B L K ) A N D N O N P O W E R
L IM IT E D ( Y E L /B L K ) W IR IN G
D A T E C OD E : 5 1 9 - 9 5 8
BL K
S

S IM P L E X T IM E R E C O R D E R C O .G A R D N E R M A .U S A
Actuator
FIRE SUPPRESSION
SYSTEM ABORT

- ID N E T IN +
+ ID N E T IN -

PUSH AND HOLD

MANUAL
RELEASE

Agent discharge path

Supervised IAM with
optional Abort Switch
Class B Simple NAC wiring; dedicated
IDNet Addressable devices to Suppression Release Actuator

SUPPRESSION RELEASE PANEL

CAUTION: This Control Unit has been arranged for releasing
Service. Disable all releasing device circuits prior to servicing.

To additional addressable
IDNAC for Addressable notification appliances
horn and strobe control
4007ES Fully Addressable Suppression Release Appliqué wording:
Control Panel with Suppression
Release Appliqué SUPPRESSION RELEASE PANEL
CAUTION: This Control Unit has been arranged for releasing
service. Disable all releasing device circuits prior to servicing.

5 S4007-0003-6 7/2018
Suppression Release Peripheral Wiring Reference

Maximum Release Appliance Circuit (RAC) Wiring Distances from Suppression Release Peripheral to
the Valve Solenoid (based on a total drop of 0.6 V)
RAC Output Current Distance Total Line
(refer to solenoid
18 AWG 16 AWG 14 AWG 12 AWG Resistance
rating)
0.50 A 74 ft 23 m 118 ft 36 m 188 ft 57 m 300 ft 91 m 1.06 
0.75 A 50 ft 15 m 79 ft 24 m 126 ft 38 m 200 ft 61 m 0.71 
1.00 A 37 ft 11 m 59 ft 18 m 94 ft 29 m 150 ft 46 m 0.53 
1.25 A 30 ft 9m 47 ft 14 m 75 ft 23 m 120 ft 36.6 m 1.06 
1.5 A 25 ft 7.6 m 39 ft 12 m 63 ft 19 m 100 ft 30.5 m 0.71 
1.75 A 21 ft 6.4 m 34 ft 10 m 54 ft 16 m 85 ft 26 m 0.53 
2.00 A 19 ft 5.8 m 30 ft 9m 47 ft 14 m 75 ft 23 m 0.53 
Metric wire equivalents: 18 AWG = 0.82 mm 2; 16 AWG = 1.31 mm 2; 14 AWG = 2.08 mm 2; 12 AWG = 3.31 mm2

NORMAL

DISC./
1
DISABLE

FIRE SUPPRESSION
DISCONNECT / DISABLE

FIRE
RELEASING NORMAL

DEVICE
0

DISC./
1
DISABLE

FIRE SUPPRESSION
DISCONNECT / DISABLE

FIRE SUPPRESSION
SYSTEM ABORT

- ID N E T IN +
+ ID N E T
IN -

PUSH AND HOLD

MANUAL
RELEASE

Maximum Notification Appliance Circuit (NAC) Wiring Distances to a Suppression Release Peripheral
(0.5 A to 1.75 A drop is based on a total drop of 3.4V; 2 A drop is based upon a total drop of 1.2 V) FIRE SUPPRESSION
RAC Output Current Distance SYSTEM ABORT
Total Line
(refer to solenoid
18 AWG 16 AWG 14 AWG 12 AWG Resistance
rating)
0.50 A 250 ft 76 m 399 ft 122 m 635 ft 194 m 1010 ft 308 m 3.58 
0.75 A 167 ft 51 m 266 ft 81 m 423 ft 129 m 673 ft 205 m 2.39 
1.00 A 125 ft 38 m 199 ft 61 m 317 ft 97 m 505 ft 154 m 1.79  PUSH AND HOLD
1.25 A 100 ft 30 m 159 ft 48 m 254 ft 77 m 404 ft 123 m 1.43 
1.5 A 84 ft 26 m 133 ft 41 m 212 ft 65 m 337 ft 103 m 1.19 
1.75 A 72 ft 22 m 114 ft 35 m 181 ft 55 m 289 ft 88 m 1.02 
2.00 A 25 ft 7.6 m 39 ft 12 m 63 ft 19 m 100 ft 30 m 0.36 
2 2 2 2
Metric wire equivalents: 18 AWG = 0.82 mm ; 16 AWG = 1.31 mm ; 14 AWG = 2.08 mm ; 12 AWG = 3.31 mm
6 S4007-0003-6 7/2018
Specifications
Suppression Release Peripheral 4090-9005 and 4090-9006
Communications IDNet, one address

RAC Output with 4007ES 2 A maximum At nominal 24 VDC, regulated; refer to NAC Power
Rating with 4009 IDNet NAC Extender 1 A maximum Requirements for more detail

Voltage 16 to 32 VDC (nominal 24 VDC)

NAC Power Requirements No additional current required, circuit appears as standard end-of-line (EOL)
Supervisory Current
NAC loading
NOTE: 4007ES NACs are
RAC Current NAC Current RAC Current NAC Current
rated at 3 A; 4009 IDNet Alarm Current
NAC Extender NACs are 0.5 A 0.845 A 1.25 A 2.14 A
Reference
rated at 2 A, Extender 0.75 A 1.28 A 1.5 A 2.56 A
expansion NACs are rated
1.5 A (RAC current = 0.87 A 1.5 A 1.75
actuator current) 3A
1A 1.71 A 2A
Screw terminals for input and output wiring, 18 to 12 AWG wire
Wire Connections
(0.82 mm2 to 3.31 mm2)
Up to 2500 ft (762 m) from the IDNet source module
IDNet Wiring Distance Reference Up to 10,000 ft (3048 m) total Class B wiring distance including T-Taps
Compatible with Simplex 2081-9044 Overvoltage Protectors
Dimensions See installation reference on page 8
Operating Temperature 32° to 120° F (0° to 49° C) indoor operation only
Operating Humidity Range 10 to 90% RH at 90° F (32° C)

Coil Supervision Module 2081-9046

Construction Epoxy encapsulated
Dimensions 1-3/8” W x 2-7/16” L x 1-1/16” H (34 mm x 62 mm x 27 mm)
Wiring 18 AWG (0.82 mm2) wire leads, color coded
Current Rating 2 A Maximum; internally fused at 3 A, non-replaceable

7 S4007-0003-6 7/2018
Compatible UL Listed Valves and Actuators

Manufacturer Model Number Electrical Ratings

AUTOMAN II-C Assembly (solenoid 17728; coil
24 VDC, 750 mA
25924)
AUTOMAN II-C Explosion-Proof Releasing Device
24 VDC, 750 mA
(solenoid 31492; coil 31438)
AUTOMAN II-C Assembly (solenoid 68739; coil
24VDC, 750 mA
25924)
ANSUL Solenoid Electric Actuator (solenoid 73111; coil
24 VDC, 1 A
73097)
*CV90 HF Electric Actuator 73327 24 VDC, 570 mA
LP CO2 w/ASCO solenoid 422934 24 VDC, 442 mA
LP CO2 double action 24 VDC solenoid 430948 24 VDC, 438 mA
LP CO2 3-way selector valve solenoid 433419 24 VDC, 438 mA
Electric Actuator 24 VDC solenoid 570537 24 VDC, 250 mA
Solenoid Electric Actuator (uses solenoid: Flow
Control 609500/671S)
Solenoid Coupling Assembly 21006401 (uses
solenoid: Flow Control 609500/671S)
Solenoid Coupling Assembly 21006402 (uses
LPG 24 VDC, 542 mA
solenoid: Flow Control 609500/671S)
LPG128/145/190/230-50/55 FM-200 valves (uses
solenoid: Flow Control 609500/671S)
LPG128-90UL iFLOW and FM-200 valve (uses
solenoid: Flow Control 609500/671S)
71395SN2ENJ1N0H111C2 (Skinner coil H111C2) 24 VDC, 420 mA
73212BN4TN00N0C111C2 (Skinner coil C111C2) 24 VDC, 420 mA
Skinner 73212BN4TNLVN0C322C2 (Skinner coil C322C2) 24 VDC, 830 mA
73218BN4UNLVN0H111C2 (Skinner coil H111C2) 24 VDC, 410 mA
73218BN4UNLVN0C111C2 (Skinner coil C111C2) 24 VDC, 410 mA
8210A107 (097617-005D coil) 24 VDC, 750 mA
8210G207 (238310 coil) 24 VDC, 440 mA
8211A107 (097617-005D coil) 24 VDC, 750 mA
8262H182 (238910 coil) 24 VDC, 483 mA
ASCO HV2628571 (23810 coil) 24 VDC, 442 mA
HV2648581 (23810 coil) 24 VDC, 442 mA
EF8210G001MBMO (238714 coil) 24 VDC, 450 mA
R8210A107 (097617-005D coil) 24 VDC, 700 mA
T8210A107 (097617-005D coil) 24 VDC, 700 mA
ECH Electrical Control Head (551201) 24 VDC, 1700 mA
Pyro-Chem Explosion-Proof Electric Actuator (570147) 24 VDC, 396 mA
Removable Electric Actuator (570209) 24 VDC, 200 mA
304.205.010 – Electrical Actuator Suppression Diode 24 VDC, 250 mA
Hygood
304.209.001 – Electrical Actuator Bridge Rectifier 24 VDC, 250 mA
Minimax MX1230 without diode 24 VDC, 500 mA
Versa CGS-4292-NB3-S20000 24 VDC, 438 mA
Burkert 5282 2/2-Way Solenoid Valve 24 VDC, 333 mA
TSP 304205030 24 VDC, 0.5 A
Tyco Safety Products
TSP 304700001 24 VDC, 830mA
Masteco MSC-01 24 VDC, 1.7A
* For 24 VDC, 450 mA activation, requires one actuator connected in series with a 73866 (21.5 ohm, 23 watt) in-line resistor shipping
assembly ordered separately. For additional information refer to the manufacturer’s technical documentation.

8 S4007-0003-6 7/2018
Compatible FM Approved Water Control Valves

4007ES Control Panels are assigned to FM Release Control Panel Group 3. Group 3 FM Approved Release Control Panels
are compatible will all FM Approved Solenoid Valves rated at 22 Watts or less. For verification of agency listings and power
requirements refer to the solenoid valve manufacturer's technical documentation.

Suppression Release Peripheral Installation Reference Diagram

2975-9227 Box, red with white

lettering (supplied with 4090-9006)

Door hinges on left and

lifts off for access

4 Knockouts,
one each side

Door height Door screw

8-1/8" fastener
(206 mm)

4090-9812 LED indicator

option (supplied with
4090-9006)
Door depth
1/2" (13 mm)

Door width Box depth

6-1/8" (156 mm) 4" (102 mm)
Box depth with door
4-1/16" (103 mm)

4090-9005 Suppression
Release Peripheral assembly
(supplied with 4090-9006)
NAC +
NAC -

Box height
8" (203 mm)
RAC -
IDNet+

RAC +
IDNet-

ON

1 2 3 4 5 6 7 8

IDNET SUPPRESSION RELEASE PERIPHERAL ASSY 566-104

Box width
6" (152 mm)

9 S4007-0003-6 7/2018
TYCO, SIMPLEX, and the product names listed in this material are marks and/or registered marks. Unauthorized use is strictly prohibited. NFPA 72 and National Fire Alarm and
Signaling Code are registered trademarks of the National Fire Protection Association (NFPA).

Tyco Fire Protection Products • Westminster, MA • 01441-0001 • USA S4007-0003-6 7/2018

www.simplex-fire.com
© 2017 Tyco Fire Protection Products. All rights reserved. All specifications and other information shown were current as of document revision date and are subject to change without notice.