Republic of the Philippines

Department of Education
Region VIII
BORONGAN CITY DIVISION
STA. FE NATIONAL HIGH SCHOOL
Sta. Fe, Borongan City

FOURTH PERIODICAL EXAMINATION IN ICT 8

TEST I. Multiple Choice

Directions: Write the letter which corresponds to the best answer.

1. It lets you open and close documents with a few extras including import, which deals with scanning, and
save for web, which allows you to export a web-ready image from your Photoshop file.
a. File Menu c. Edit Menu
b. Layer Menu d. Filter Menu
2. This tool takes color samples from colors on the page and displays them in the Color Boxes. It works by
changing your foreground color to whatever color you click on. Holding the [Alt] key will change your
background color.
a. Notes Tool c. Eyedropper Tool
b. Hand Tool d. Color Boxes and Models
3. This is the anti-brush tool. It works like an eraser and removes whatever path or stroke you wish to delete.
a. Gradient Tool c. Dodge Tool
b. Erase Tool d. Hidden Tools
4. It is used for drawing smooth-edged paths, selected in the Path Selection Tool. Paths can be used in a few
different ways, mostly to create clipping paths, or to create selections
a. Text Tool or Horizontal Type Tool c. Pen Tool
b. Brush Tool c. Path Selection Tool
5. It is a multi-layer document that retains its full editing options when saved.
a. JPEG file b. PNG File
b. PDF file d. Psd file
6. What should you do to eliminate unwanted parts of the picture?
a. Crop the unwanted part c. Posterize the unwanted part
b. Select the unwanted part d. zoom the unwanted part
7. What do you think will happen when you over stretch a picture when resizing?
a. It will be pixelated c. it will be dotted
b. It will be deformed d. it will be enhanced
8. Where can you find all important informations in the photoshop interface?
a. Menu c. options
b. Panes d. Tool bars
9. In cropping a picture, what basic rule are you going to observe?
a. Rule of first c. rule of second
b. rule of thirds d. rule of fourths
10. What is the recommended default web resolution of an image for beginners?
a. 72dpi c. 74dpi
b. 76dpi d. 78dpi
11. A description of the size, shape, or location of features on an object or structure.
a. Drawing dimension c. Background
b. Convention d. Dimension
12 The first multiline you select to create a closed cross intersection.
a. Layout c. Background
b. Command d. Dimension
13. It is connected sequence of lines created as a single line.
a. Polyline c. Linear
b. Multi-line d. Spline
14. Which of the following options is not belong to activate command line?
a. Draw Toolbar
 b. Type C on the command line and press Enter
c. Draw from the pull-down menu bar
d. Type L for line on the command line and press Enter
15. AutoCAD Drawing command that allow you to create a single line or a series of lines.
a. Spline Command c. Polygon command
b. Arc Command d. Line Command
16. An AutoCAD command that allow you to create polygons of different shapes and sizes.
a. Spline Command c. Polygon command
b. Arc Command d. Line Command
17. Preset work environment containing specific interface items.
a. Layout space c. Drawing space
b. Work space d. Text space
18. Which of the following options is not belong to activate Polyline command?
a. Draw Toolbar
b. Type Pl at the command line and then press Enter
c. Draw from the pull-down menu bar
d. Type L for line on the command line and press Enter
19. The following statement are the steps in drawing an ellipse with arc option; except?
a. Draw pull-down menu, select ellipse, then click Arc
b. Specify first endpoint on the elliptical arc
c. Specify the end angle point.
d. Specify the radius of the circle
20. Describes the process of creating a technical drawing with the use of computer software.
a. Computer Auto Drawing c. Computer Auto Design
b. Computer Aided Drafting d. Computer Aided Design
21. A closed curve with a constant radius around a center point; usually dimensioned according to the
diameter
a. Ellipse c. Semi-circle
b. Circle d. Arc
22. Numerical values used to locate a point in the drawing area.
a. Ordinates c. Dimension
b. Click d. Elements
23. Standards related to line thickness, type, and purpose.
a. Drawing units c. Dimension
b. Line conventions d. Drawing scale
24. Projecting object features onto an imaginary plane.
a. Oblique Drawing c. Orthographic
b. Perspective d. Isometric
25.Lettering on a CADD drawing.
a. Type c. Text
b. Draw d. Command
26. The process of using a computer with CADD software to design and produce drawings and models.
a. Computer Aided Drawing c. Computer Aided Drafting
b. Computer Aided Design & Drafting d. Computer Aided Design
27. The initial reference point AutoCAD uses when stretching, moving, copying, and scaling objects.
a. Base point c. Starting point
b. Command d. layout space
28. It allows you to scroll to the first, last, next, or previous layout tab.
a. Drawing status bar c. Navigation layout
b. Series tabs d. Base point
29. The ratio between the actual size of objects in the drawing and the size at which the objects plot on a sheet
of paper.
a. Drawing units c. Dimension
b. Drawing scale d. Convention
31. ______________ is displayed between the drawing window and the status bar area.
a. Tool bar c. command line widow
b. Menu browser d. info center
32. An editing command allows you to trim objects in a drawing so they end precisely at a cutting edge
defined by one or more other objects in the drawing.
a. Stretch c. Extend
b. Trim d. Explode
33. The zoom option that designates rectangular area to be drawn as large as possible
a. Extent c. Dynamic
b. Window d. Number X
34. How to command creating New Drawing at the command promt?
a. Type ND c. Type N
b. Type NEW d. Type NEW D
35. It reverses the last action you command in the drawing Window.
a. Redo c. Undo
b. Back d. Edit
36. In the function keys and accelerators keys in AutoCAD, what keys you have to press to toggles text
window?
a. F1 c. F3
b. F4 d. F2
37. How to use accelerator keys when you are going to repeat last command?
a. CNTRL+J b. CNTRL+L
b. CNTRL+M d. CNTRL+O
38. Using accelerator keys, what to press in the keyboard when you are going to open the existing drawing?
a. CNTRL+J b. CNTRL+L
b. CNTRL+M d. CNTRL+O
39. How to command Qiuck Save in the command prompt?
a. Type QUICK S b. Type QSAVE
b. Type QS d. Type QUISAVE
40. It is a connected sequence of line segments created as a single object. You can create straight line
segments, arc segments, or a combination of the two.
a. OSNA b. Orthogonal Line
b. Polyline c. Spline
Test II.
Arrange orderly the correct steps of the following activity.
Cropping image
______ 41. Click the "Crop" tool, which looks like two crossed right angles and is the fifth icon from the top of the
"Tools" column. The cursor changes to the crop icon.
_______42. Click the "View" menu and select "Fit on Screen" so you can see the entire image.
_______43. Open Adobe Photoshop. Select the "File" menu. Select the "Open" option. Click on a photo
filename
______44. Press the Enter key on the keyboard to crop the photo. Go to "File" then click "Save" to save the crop
to the original picture, or select "Save As" to create a new picture from the cropped image.
_______45. Draw a dotted rectangle or square around the part of the photo that you want to keep.

Test III. Enumeration

46-50. Give atleast five (5) Editing command in AutoCAD

G O O D L U C K !