Scribd Logo
Upload

Welcome to Scribd!

  • 312 views

    Cap Plate

    Uploaded by

    Vinoth Kumar
    This document provides details on the design of three steel cap plate beam-to-column connections. The connections use a 1/2 inch thick A36 steel cap plate with 3/4 inch A325 bolts located a minimum of 1.5 inches from the beam flange and column. Design checks are performed to verify the capacity of each connection component exceeds the demands based on the AISC 360-10 ASD design code.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd

    Cap Plate

    Uploaded by

    Vinoth Kumar
    312 views18 pages
    This document provides details on the design of three steel cap plate beam-to-column connections. The connections use a 1/2 inch thick A36 steel cap plate with 3/4 inch A325 bolts located a minimum of 1.5 inches from the beam flange and column. Design checks are performed to verify the capacity of each connection component exceeds the demands based on the AISC 360-10 ASD design code.

    Original Description:

    plate

    Original Title

    Cap plate

    Copyright

    © © All Rights Reserved

    Available Formats

    TXT, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides details on the design of three steel cap plate beam-to-column connections. The connections use a 1/2 inch thick A36 steel cap plate with 3/4 inch A325 bolts located a minimum of 1.5 inches from the beam flange and column. Design checks are performed to verify the capacity of each connection component exceeds the demands based on the AISC 360-10 ASD design code.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd
    Download as txt, pdf, or txt
    312 views18 pages

    Cap Plate

    Uploaded by

    Vinoth Kumar
    This document provides details on the design of three steel cap plate beam-to-column connections. The connections use a 1/2 inch thick A36 steel cap plate with 3/4 inch A325 bolts located a minimum of 1.5 inches from the beam flange and column. Design checks are performed to verify the capacity of each connection component exceeds the demands based on the AISC 360-10 ASD design code.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd
    Download as txt, pdf, or txt
    of 18

    Current Date: 26-04-2019 15:36

    Units system: English

    File name: Z:\01_Projects\49_PRESTON TRAIL CHURCH\06_Report\02_Connection


    design\10_CAP
    PLATE CONNECTION\01_RAM & LIMCON FILES\01_RAM CONNECTION FILES\CAPPLATE
    CONNECTION.rcnx\

    Steel connections
    Detailed report
    ______________________________________________________________________

    ____________________________________________________________

    Connection name : CP_5/8PL_2B3/4


    Connection ID : 1
    ____________________________________________________________

    Family: Column cap (CC)


    Type: Cap Plate
    GENERAL INFORMATION
    Connector

    MEMBERS
    Beam
    General
    Beam section : W 24X76
    Beam material : A992 Gr50
    Built-up : No
    Column
    General
    Support section : HSS_SQR 8X8X5_16
    Support material : A500 GrB rectangular
    Column orientation : Longitudinal

    CAP PLATE
    Connector
    tp: Plate thickness : 0.5 in
    Plate material : A36
    Bolts : 3/4" A325 N
    Lev: Transverse distance to edge : 1.75 in
    Leh: Longitudinal distance to edge : 1.5 in
    pf: distance bolt centerline-tension flange : 1.5 in
    s: Transverse bolt spacing : 5.5 in
    Hole type on plate : Standard (STD)
    Beam side
    Hole type on beam : Standard (STD)
    Column side
    Weld to support : E70XX
    D1: Weld size to support (1/16in) : 4
    Stiffeners
    Ns: Transverse stiffeners : None

    Design code: AISC 360-10 ASD


    DEMANDS
    Description Ru Pu Mu PufTop PufBot Load type
    [Kip] [Kip] [Kip*ft] [Kip] [Kip]
    ------------------------------------------
    DL 0.00 0.00 21.00 0.00 0.00 Design
    ------------------------------------------

    GEOMETRIC CONSIDERATIONS
    Dimensions Unit Value Min. value Max. value Sta.
    References

    Cap Plate
    Bolt diameter [in] 0.75 -- 1.50 DG4 Sec. 1.1
    Transverse center-to-center spacing (gage) [in] 5.50 2.00 12.00
    Sec.
    J3.3,
    Sec. J3.5
    Transverse edge distance [in] 1.75 1.00 -- Tables J3.4,
    J3.5
    Longitudinal edge distance [in] 1.50 1.00 -- Tables J3.4,
    J3.5
    Beam
    Transverse edge distance [in] 1.75 1.00 -- Tables J3.4,
    J3.5
    Plate (support side)
    Distance from centerline of bolt to nearer surface o... [in] 1.50 1.25
    --
    DG4 Sec. 2.1
    Weld size [1/16in] 4 3 -- table J2.4

    DESIGN CHECK
    Verification Unit Capacity Demand Ctrl EQ Ratio
    References

    Cap Plate
    Resulting tension capacity due prying action [Kip] 31.37 26.53 DL 0.85
    p. 9-10
    Beam
    Bending [Kip*ft] 499.00 21.00 DL 0.04 Sec. F13.1
    Resulting tension capacity due prying action [Kip] 30.38 26.53 DL 0.87
    p. 9-11,
    p. 9-10
    Local web yielding [Kip] 127.47 26.53 DL 0.21 Eq. J10-2
    Web crippling [Kip] 137.06 26.53 DL 0.19 Eq. J10-4
    Compression buckling of the web [Kip] 68.44 26.53 DL 0.39 Eq. J10-8
    Support
    Weld capacity [Kip] 29.70 26.53 DL 0.89 Eq. J2-3
    Side wall local crippling [Kip] 188.32 26.53 DL 0.14 Eq. K1-15
    Side wall local yielding [Kip] 71.39 26.53 DL 0.37 Eq. K1-14b

    Global critical strength ratio 0.89


    ____________________________________________________________

    Connection name : CP_5/8PL_2B3/4


    Connection ID : 2
    ____________________________________________________________

    Family: Column cap (CC)


    Type: Cap Plate
    GENERAL INFORMATION
    Connector

    MEMBERS
    Beam
    General
    Beam section : W 24X62
    Beam material : A992 Gr50
    Built-up : No
    Column
    General
    Support section : HSS_SQR 8X8X5_16
    Support material : A500 GrB rectangular
    Column orientation : Longitudinal

    CAP PLATE
    Connector
    tp: Plate thickness : 0.5 in
    Plate material : A36
    Bolts : 3/4" A325 N
    Lev: Transverse distance to edge : 2.75 in
    Leh: Longitudinal distance to edge : 1.5 in
    pf: distance bolt centerline-tension flange : 1.5 in
    s: Transverse bolt spacing : 3.5 in
    Hole type on plate : Standard (STD)
    Beam side
    Hole type on beam : Standard (STD)
    Column side
    Weld to support : E70XX
    D1: Weld size to support (1/16in) : 4
    Stiffeners
    Ns: Transverse stiffeners : None

    Design code: AISC 360-10 ASD

    DEMANDS
    Description Ru Pu Mu PufTop PufBot Load type
    [Kip] [Kip] [Kip*ft] [Kip] [Kip]
    ------------------------------------------
    DL 0.00 0.00 20.00 0.00 0.00 Design
    ------------------------------------------

    GEOMETRIC CONSIDERATIONS
    Dimensions Unit Value Min. value Max. value Sta.
    References

    Cap Plate
    Bolt diameter [in] 0.75 -- 1.50 DG4 Sec. 1.1
    Transverse center-to-center spacing (gage) [in] 3.50 2.00 12.00
    Sec.
    J3.3,
    Sec. J3.5
    Transverse edge distance [in] 2.75 1.00 -- Tables J3.4,
    J3.5
    Longitudinal edge distance [in] 1.50 1.00 -- Tables J3.4,
    J3.5
    Beam
    Transverse edge distance [in] 1.77 1.00 -- Tables J3.4,
    J3.5
    Plate (support side)
    Distance from centerline of bolt to nearer surface o... [in] 1.50 1.25
    --
    DG4 Sec. 2.1
    Weld size [1/16in] 4 3 -- table J2.4

    DESIGN CHECK
    Verification Unit Capacity Demand Ctrl EQ Ratio
    References

    Cap Plate
    Resulting tension capacity due prying action [Kip] 31.37 25.26 DL 0.81
    p. 9-10
    Beam
    Bending [Kip*ft] 319.28 20.00 DL 0.06 Eq. F13-1
    Resulting tension capacity due prying action [Kip] 31.11 25.26 DL 0.81
    p. 9-11,
    p. 9-10
    Local web yielding [Kip] 118.12 25.26 DL 0.21 Eq. J10-2
    Web crippling [Kip] 127.25 25.26 DL 0.20 Eq. J10-4
    Compression buckling of the web [Kip] 63.94 25.26 DL 0.40 Eq. J10-8
    Support
    Weld capacity [Kip] 29.70 25.26 DL 0.85 Eq. J2-3
    Side wall local crippling [Kip] 180.64 25.26 DL 0.14 Eq. K1-15
    Side wall local yielding [Kip] 67.60 25.26 DL 0.37 Eq. K1-14a

    Global critical strength ratio 0.85

    ____________________________________________________________

    Connection name : CP_5/8PL_2B3/4


    Connection ID : 3
    ____________________________________________________________

    Family: Column cap (CC)


    Type: Cap Plate
    GENERAL INFORMATION
    Connector

    MEMBERS
    Beam
    General
    Beam section : W 21X50
    Beam material : A992 Gr50
    Built-up : No
    Column
    General
    Support section : HSS_SQR 8X8X5_16
    Support material : A500 GrB rectangular
    Column orientation : Longitudinal

    CAP PLATE
    Connector
    tp: Plate thickness : 0.5 in
    Plate material : A36
    Bolts : 3/4" A325 N
    Lev: Transverse distance to edge : 2.75 in
    Leh: Longitudinal distance to edge : 1.5 in
    pf: distance bolt centerline-tension flange : 1.5 in
    s: Transverse bolt spacing : 3.5 in
    Hole type on plate : Standard (STD)
    Beam side
    Hole type on beam : Standard (STD)
    Column side
    Weld to support : E70XX
    D1: Weld size to support (1/16in) : 4
    Stiffeners
    Ns: Transverse stiffeners : None

    Design code: AISC 360-10 ASD

    DEMANDS
    Description Ru Pu Mu PufTop PufBot Load type
    [Kip] [Kip] [Kip*ft] [Kip] [Kip]
    ------------------------------------------
    DL 0.00 0.00 19.00 0.00 0.00 Design
    ------------------------------------------

    GEOMETRIC CONSIDERATIONS
    Dimensions Unit Value Min. value Max. value Sta.
    References

    Cap Plate
    Bolt diameter [in] 0.75 -- 1.50 DG4 Sec. 1.1
    Transverse center-to-center spacing (gage) [in] 3.50 2.00 12.00
    Sec.
    J3.3,
    Sec. J3.5
    Transverse edge distance [in] 2.75 1.00 -- Tables J3.4,
    J3.5
    Longitudinal edge distance [in] 1.50 1.00 -- Tables J3.4,
    J3.5
    Beam
    Transverse edge distance [in] 1.52 1.00 -- Tables J3.4,
    J3.5
    Plate (support side)
    Distance from centerline of bolt to nearer surface o... [in] 1.50 1.25
    --
    DG4 Sec. 2.1
    Weld size [1/16in] 4 3 -- table J2.4

    DESIGN CHECK
    Verification Unit Capacity Demand Ctrl EQ Ratio
    References

    Cap Plate
    Resulting tension capacity due prying action [Kip] 31.37 24.00 DL 0.76
    p. 9-10
    Beam
    Bending [Kip*ft] 224.37 19.00 DL 0.08 Eq. F13-1
    Resulting tension capacity due prying action [Kip] 25.51 24.00 DL 0.94
    p. 9-11,
    p. 9-10
    Local web yielding [Kip] 101.22 24.00 DL 0.24 Eq. J10-2
    Web crippling [Kip] 102.41 24.00 DL 0.23 Eq. J10-4
    Compression buckling of the web [Kip] 50.73 24.00 DL 0.47 Eq. J10-8
    Support
    Weld capacity [Kip] 29.70 24.00 DL 0.81 Eq. J2-3
    Side wall local crippling [Kip] 167.40 24.00 DL 0.14 Eq. K1-15
    Side wall local yielding [Kip] 60.68 24.00 DL 0.40 Eq. K1-14a

    Global critical strength ratio 0.94

    ____________________________________________________________

    Connection name : CP_5/8PL_2B3/4


    Connection ID : 4
    ____________________________________________________________

    Family: Column cap (CC)


    Type: Cap Plate
    GENERAL INFORMATION
    Connector

    MEMBERS
    Beam
    General
    Beam section : W 18X35
    Beam material : A992 Gr50
    Built-up : No
    Column
    General
    Support section : HSS_SQR 8X8X5_16
    Support material : A500 GrB rectangular
    Column orientation : Longitudinal

    CAP PLATE
    Connector
    tp: Plate thickness : 0.5 in
    Plate material : A36
    Bolts : 3/4" A325 N
    Lev: Transverse distance to edge : 2.75 in
    Leh: Longitudinal distance to edge : 1.5 in
    pf: distance bolt centerline-tension flange : 1.5 in
    s: Transverse bolt spacing : 3.5 in
    Hole type on plate : Standard (STD)
    Beam side
    Hole type on beam : Standard (STD)
    Column side
    Weld to support : E70XX
    D1: Weld size to support (1/16in) : 4
    Stiffeners
    Ns: Transverse stiffeners : None

    Design code: AISC 360-10 ASD

    DEMANDS
    Description Ru Pu Mu PufTop PufBot Load type
    [Kip] [Kip] [Kip*ft] [Kip] [Kip]
    ------------------------------------------
    DL 0.00 0.00 12.00 0.00 0.00 Design
    ------------------------------------------

    GEOMETRIC CONSIDERATIONS
    Dimensions Unit Value Min. value Max. value Sta.
    References

    Cap Plate
    Bolt diameter [in] 0.75 -- 1.50 DG4 Sec. 1.1
    Transverse center-to-center spacing (gage) [in] 3.50 2.00 12.00
    Sec.
    J3.3,
    Sec. J3.5
    Transverse edge distance [in] 2.75 1.00 -- Tables J3.4,
    J3.5
    Longitudinal edge distance [in] 1.50 1.00 -- Tables J3.4,
    J3.5
    Beam
    Transverse edge distance [in] 1.25 1.00 -- Tables J3.4,
    J3.5
    Plate (support side)
    Distance from centerline of bolt to nearer surface o... [in] 1.50 1.25
    --
    DG4 Sec. 2.1
    Weld size [1/16in] 4 3 -- table J2.4

    DESIGN CHECK
    Verification Unit Capacity Demand Ctrl EQ Ratio
    References

    Cap Plate
    Resulting tension capacity due prying action [Kip] 31.37 15.16 DL 0.48
    p. 9-10
    Beam
    Bending [Kip*ft] 132.34 12.00 DL 0.09 Eq. F13-1
    Resulting tension capacity due prying action [Kip] 16.03 15.16 DL 0.95
    p. 9-11,
    p. 9-10
    Local web yielding [Kip] 69.26 15.16 DL 0.22 Eq. J10-2
    Web crippling [Kip] 66.07 15.16 DL 0.23 Eq. J10-4
    Compression buckling of the web [Kip] 29.12 15.16 DL 0.52 Eq. J10-8
    Support
    Weld capacity [Kip] 29.70 15.16 DL 0.51 Eq. J2-3
    Side wall local crippling [Kip] 155.88 15.16 DL 0.10 Eq. K1-15
    Side wall local yielding [Kip] 54.66 15.16 DL 0.28 Eq. K1-14a

    Global critical strength ratio 0.95

    ____________________________________________________________

    Connection name : CP_5/8PL_2B3/4


    Connection ID : 5
    ____________________________________________________________

    Family: Column cap (CC)


    Type: Cap Plate
    GENERAL INFORMATION
    Connector

    MEMBERS
    Beam
    General
    Beam section : W 24X55
    Beam material : A992 Gr50
    Built-up : No
    Column
    General
    Support section : HSS_SQR 6X6X5_16
    Support material : A500 GrB rectangular
    Column orientation : Longitudinal

    CAP PLATE
    Connector
    tp: Plate thickness : 0.5 in
    Plate material : A36
    Bolts : 3/4" A325 N
    Lev: Transverse distance to edge : 1.75 in
    Leh: Longitudinal distance to edge : 1.5 in
    pf: distance bolt centerline-tension flange : 1.5 in
    s: Transverse bolt spacing : 3.5 in
    Hole type on plate : Standard (STD)
    Beam side
    Hole type on beam : Standard (STD)
    Column side
    Weld to support : E70XX
    D1: Weld size to support (1/16in) : 4
    Stiffeners
    Ns: Transverse stiffeners : None

    Design code: AISC 360-10 ASD


    DEMANDS
    Description Ru Pu Mu PufTop PufBot Load type
    [Kip] [Kip] [Kip*ft] [Kip] [Kip]
    ------------------------------------------
    DL 0.00 0.00 13.00 0.00 0.00 Design
    ------------------------------------------

    GEOMETRIC CONSIDERATIONS
    Dimensions Unit Value Min. value Max. value Sta.
    References

    Cap Plate
    Bolt diameter [in] 0.75 -- 1.50 DG4 Sec. 1.1
    Transverse center-to-center spacing (gage) [in] 3.50 2.00 12.00
    Sec.
    J3.3,
    Sec. J3.5
    Transverse edge distance [in] 1.75 1.00 -- Tables J3.4,
    J3.5
    Longitudinal edge distance [in] 1.50 1.00 -- Tables J3.4,
    J3.5
    Beam
    Transverse edge distance [in] 1.76 1.00 -- Tables J3.4,
    J3.5
    Plate (support side)
    Distance from centerline of bolt to nearer surface o... [in] 1.50 1.25
    --
    DG4 Sec. 2.1
    Weld size [1/16in] 4 3 -- table J2.4

    DESIGN CHECK
    Verification Unit Capacity Demand Ctrl EQ Ratio
    References

    Cap Plate
    Resulting tension capacity due prying action [Kip] 23.88 20.80 DL 0.87
    p. 9-10
    Beam
    Bending [Kip*ft] 277.45 13.00 DL 0.05 Eq. F13-1
    Resulting tension capacity due prying action [Kip] 22.75 20.80 DL 0.91
    p. 9-11,
    p. 9-10
    Local web yielding [Kip] 103.24 20.80 DL 0.20 Eq. J10-2
    Web crippling [Kip] 105.83 20.80 DL 0.20 Eq. J10-4
    Compression buckling of the web [Kip] 49.42 20.80 DL 0.42 Eq. J10-8
    Support
    Weld capacity [Kip] 22.27 20.80 DL 0.93 Eq. J2-3
    Side wall local crippling [Kip] 211.23 20.80 DL 0.10 Eq. K1-15
    Side wall local yielding [Kip] 53.54 20.80 DL 0.39 Eq. K1-14b

    Global critical strength ratio 0.93


    ____________________________________________________________

    Connection name : CP_5/8PL_2B7/8


    Connection ID : 6
    ____________________________________________________________

    Family: Column cap (CC)


    Type: Cap Plate
    GENERAL INFORMATION
    Connector

    MEMBERS
    Beam
    General
    Beam section : W 16X26
    Beam material : A992 Gr50
    Built-up : No
    Column
    General
    Support section : HSS_SQR 6X6X5_16
    Support material : A500 GrB rectangular
    Column orientation : Longitudinal

    CAP PLATE
    Connector
    tp: Plate thickness : 0.5 in
    Plate material : A36
    Bolts : 3/4" A325 N
    Lev: Transverse distance to edge : 2.13 in
    Leh: Longitudinal distance to edge : 1.5 in
    pf: distance bolt centerline-tension flange : 1.5 in
    s: Transverse bolt spacing : 2.75 in
    Hole type on plate : Standard (STD)
    Beam side
    Hole type on beam : Standard (STD)
    Column side
    Weld to support : E70XX
    D1: Weld size to support (1/16in) : 4
    Stiffeners
    Ns: Transverse stiffeners : None

    Design code: AISC 360-10 ASD

    DEMANDS
    Description Ru Pu Mu PufTop PufBot Load type
    [Kip] [Kip] [Kip*ft] [Kip] [Kip]
    ------------------------------------------
    DL 0.00 0.00 6.50 0.00 0.00 Design
    ------------------------------------------

    GEOMETRIC CONSIDERATIONS
    Dimensions Unit Value Min. value Max. value Sta.
    References

    Cap Plate
    Bolt diameter [in] 0.75 -- 1.50 DG4 Sec. 1.1
    Transverse center-to-center spacing (gage) [in] 2.75 2.00 12.00
    Sec.
    J3.3,
    Sec. J3.5
    Transverse edge distance [in] 2.13 1.00 -- Tables J3.4,
    J3.5
    Longitudinal edge distance [in] 1.50 1.00 -- Tables J3.4,
    J3.5
    Beam
    Transverse edge distance [in] 1.38 1.00 -- Tables J3.4,
    J3.5
    Plate (support side)
    Distance from centerline of bolt to nearer surface o... [in] 1.50 1.25
    --
    DG4 Sec. 2.1
    Weld size [1/16in] 4 3 -- table J2.4

    DESIGN CHECK
    Verification Unit Capacity Demand Ctrl EQ Ratio
    References

    Cap Plate
    Resulting tension capacity due prying action [Kip] 23.88 10.40 DL 0.44
    p. 9-10
    Beam
    Bending [Kip*ft] 84.92 6.50 DL 0.08 Eq. F13-1
    Resulting tension capacity due prying action [Kip] 11.09 10.40 DL 0.94
    p. 9-11,
    p. 9-10
    Local web yielding [Kip] 54.38 10.40 DL 0.19 Eq. J10-2
    Web crippling [Kip] 47.00 10.40 DL 0.22 Eq. J10-4
    Compression buckling of the web [Kip] 19.03 10.40 DL 0.55 Eq. J10-8
    Support
    Weld capacity [Kip] 22.27 10.40 DL 0.47 Eq. J2-3
    Side wall local crippling [Kip] 181.64 10.40 DL 0.06 Eq. K1-15
    Side wall local yielding [Kip] 51.09 10.40 DL 0.20 Eq. K1-14a

    Global critical strength ratio 0.94

    ____________________________________________________________

    Connection name : CP_5/8PL_2B3/4


    Connection ID : 7
    ____________________________________________________________

    Family: Column cap (CC)


    Type: Cap Plate
    GENERAL INFORMATION
    Connector

    MEMBERS
    Beam
    General
    Beam section : W 33X118
    Beam material : A992 Gr50
    Built-up : No
    Column
    General
    Support section : HSS_SQR 10X10X3_8
    Support material : A500 GrB rectangular
    Column orientation : Longitudinal

    CAP PLATE
    Connector
    tp: Plate thickness : 0.5 in
    Plate material : A36
    Bolts : 3/4" A325 N
    Lev: Transverse distance to edge : 3 in
    Leh: Longitudinal distance to edge : 1.5 in
    pf: distance bolt centerline-tension flange : 1.5 in
    s: Transverse bolt spacing : 5.5 in
    Hole type on plate : Standard (STD)
    Beam side
    Hole type on beam : Standard (STD)
    Column side
    Weld to support : E70XX
    D1: Weld size to support (1/16in) : 4
    Stiffeners
    Ns: Transverse stiffeners : None

    Design code: AISC 360-10 ASD

    DEMANDS
    Description Ru Pu Mu PufTop PufBot Load type
    [Kip] [Kip] [Kip*ft] [Kip] [Kip]
    ------------------------------------------
    DL 0.00 0.00 26.00 0.00 0.00 Design
    ------------------------------------------

    GEOMETRIC CONSIDERATIONS
    Dimensions Unit Value Min. value Max. value Sta.
    References

    Cap Plate
    Bolt diameter [in] 0.75 -- 1.50 DG4 Sec. 1.1
    Transverse center-to-center spacing (gage) [in] 5.50 2.00 12.00
    Sec.
    J3.3,
    Sec. J3.5
    Transverse edge distance [in] 3.00 1.00 -- Tables J3.4,
    J3.5
    Longitudinal edge distance [in] 1.50 1.00 -- Tables J3.4,
    J3.5
    Beam
    Transverse edge distance [in] 3.00 1.00 -- Tables J3.4,
    J3.5
    Plate (support side)
    Distance from centerline of bolt to nearer surface o... [in] 1.50 1.25
    --
    DG4 Sec. 2.1
    Weld size [1/16in] 4 3 -- table J2.4
    DESIGN CHECK
    Verification Unit Capacity Demand Ctrl EQ Ratio
    References

    Cap Plate
    Resulting tension capacity due prying action [Kip] 33.18 27.13 DL 0.82
    p. 9-10
    Beam
    Bending [Kip*ft] 1035.43 26.00 DL 0.03 Sec. F13.1
    Resulting tension capacity due prying action [Kip] 34.16 27.13 DL 0.79
    p. 9-11,
    p. 9-10
    Local web yielding [Kip] 184.23 27.13 DL 0.15 Eq. J10-2
    Web crippling [Kip] 197.14 27.13 DL 0.14 Eq. J10-4
    Compression buckling of the web [Kip] 95.91 27.13 DL 0.28 Eq. J10-8
    Support
    Weld capacity [Kip] 37.12 27.13 DL 0.73 Eq. J2-3
    Side wall local crippling [Kip] 266.49 27.13 DL 0.10 Eq. K1-15
    Side wall local yielding [Kip] 90.44 27.13 DL 0.30 Eq. K1-14a

    Global critical strength ratio 0.82

    ____________________________________________________________

    Connection name : CP_5/8PL_2B3/4


    Connection ID : 8
    ____________________________________________________________

    Family: Column cap (CC)


    Type: Cap Plate
    GENERAL INFORMATION
    Connector

    MEMBERS
    Beam
    General
    Beam section : W 30X90
    Beam material : A992 Gr50
    Built-up : No
    Column
    General
    Support section : HSS_SQR 12X12X3_8
    Support material : A500 GrB rectangular
    Column orientation : Longitudinal

    CAP PLATE
    Connector
    tp: Plate thickness : 0.5 in
    Plate material : A36
    Bolts : 3/4" A325 N
    Lev: Transverse distance to edge : 4.13 in
    Leh: Longitudinal distance to edge : 1.5 in
    pf: distance bolt centerline-tension flange : 1.5 in
    s: Transverse bolt spacing : 5.5 in
    Hole type on plate : Standard (STD)
    Beam side
    Hole type on beam : Standard (STD)
    Column side
    Weld to support : E70XX
    D1: Weld size to support (1/16in) : 4
    Stiffeners
    Ns: Transverse stiffeners : None

    Design code: AISC 360-10 ASD

    DEMANDS
    Description Ru Pu Mu PufTop PufBot Load type
    [Kip] [Kip] [Kip*ft] [Kip] [Kip]
    ------------------------------------------
    DL 0.00 0.00 27.00 0.00 0.00 Design
    ------------------------------------------

    GEOMETRIC CONSIDERATIONS
    Dimensions Unit Value Min. value Max. value Sta.
    References

    Cap Plate
    Bolt diameter [in] 0.75 -- 1.50 DG4 Sec. 1.1
    Transverse center-to-center spacing (gage) [in] 5.50 2.00 12.00
    Sec.
    J3.3,
    Sec. J3.5
    Transverse edge distance [in] 4.13 1.00 -- Tables J3.4,
    J3.5
    Longitudinal edge distance [in] 1.50 1.00 -- Tables J3.4,
    J3.5
    Beam
    Transverse edge distance [in] 2.45 1.00 -- Tables J3.4,
    J3.5
    Plate (support side)
    Distance from centerline of bolt to nearer surface o... [in] 1.50 1.25
    --
    DG4 Sec. 2.1
    Weld size [1/16in] 4 3 -- table J2.4

    DESIGN CHECK
    Verification Unit Capacity Demand Ctrl EQ Ratio
    References

    Cap Plate
    Resulting tension capacity due prying action [Kip] 34.81 24.00 DL 0.69
    p. 9-10
    Beam
    Bending [Kip*ft] 706.09 27.00 DL 0.04 Sec. F13.1
    Resulting tension capacity due prying action [Kip] 29.97 24.00 DL 0.80
    p. 9-11,
    p. 9-10
    Local web yielding [Kip] 143.33 24.00 DL 0.17 Eq. J10-2
    Web crippling [Kip] 144.97 24.00 DL 0.17 Eq. J10-4
    Compression buckling of the web [Kip] 66.59 24.00 DL 0.36 Eq. J10-8
    Support
    Weld capacity [Kip] 44.55 24.00 DL 0.54 Eq. J2-3
    Side wall local crippling [Kip] 218.08 24.00 DL 0.11 Eq. K1-15
    Side wall local yielding [Kip] 82.14 24.00 DL 0.29 Eq. K1-14a

    Global critical strength ratio 0.80

    ____________________________________________________________

    Connection name : CP_5/8PL_2B3/4


    Connection ID : 9
    ____________________________________________________________

    Family: Column cap (CC)


    Type: Cap Plate
    GENERAL INFORMATION
    Connector

    MEMBERS
    Beam
    General
    Beam section : W 27X84
    Beam material : A992 Gr50
    Built-up : No
    Column
    General
    Support section : HSS_SQR 10X10X3_8
    Support material : A500 GrB rectangular
    Column orientation : Longitudinal

    CAP PLATE
    Connector
    tp: Plate thickness : 0.5 in
    Plate material : A36
    Bolts : 3/4" A325 N
    Lev: Transverse distance to edge : 3.13 in
    Leh: Longitudinal distance to edge : 1.5 in
    pf: distance bolt centerline-tension flange : 1.5 in
    s: Transverse bolt spacing : 5.5 in
    Hole type on plate : Standard (STD)
    Beam side
    Hole type on beam : Standard (STD)
    Column side
    Weld to support : E70XX
    D1: Weld size to support (1/16in) : 4
    Stiffeners
    Ns: Transverse stiffeners : None

    Design code: AISC 360-10 ASD

    DEMANDS
    Description Ru Pu Mu PufTop PufBot Load type
    [Kip] [Kip] [Kip*ft] [Kip] [Kip]
    ------------------------------------------
    DL 0.00 0.00 24.00 0.00 0.00 Design
    ------------------------------------------

    GEOMETRIC CONSIDERATIONS
    Dimensions Unit Value Min. value Max. value Sta.
    References

    Cap Plate
    Bolt diameter [in] 0.75 -- 1.50 DG4 Sec. 1.1
    Transverse center-to-center spacing (gage) [in] 5.50 2.00 12.00
    Sec.
    J3.3,
    Sec. J3.5
    Transverse edge distance [in] 3.12 1.00 -- Tables J3.4,
    J3.5
    Longitudinal edge distance [in] 1.50 1.00 -- Tables J3.4,
    J3.5
    Beam
    Transverse edge distance [in] 2.25 1.00 -- Tables J3.4,
    J3.5
    Plate (support side)
    Distance from centerline of bolt to nearer surface o... [in] 1.50 1.25
    --
    DG4 Sec. 2.1
    Weld size [1/16in] 4 3 -- table J2.4

    DESIGN CHECK
    Verification Unit Capacity Demand Ctrl EQ Ratio
    References

    Cap Plate
    Resulting tension capacity due prying action [Kip] 33.36 25.04 DL 0.75
    p. 9-10
    Beam
    Bending [Kip*ft] 608.78 24.00 DL 0.04 Sec. F13.1
    Resulting tension capacity due prying action [Kip] 30.31 25.04 DL 0.83
    p. 9-11,
    p. 9-10
    Local web yielding [Kip] 138.75 25.04 DL 0.18 Eq. J10-2
    Web crippling [Kip] 143.67 25.04 DL 0.17 Eq. J10-4
    Compression buckling of the web [Kip] 69.55 25.04 DL 0.36 Eq. J10-8
    Support
    Weld capacity [Kip] 37.12 25.04 DL 0.67 Eq. J2-3
    Side wall local crippling [Kip] 251.76 25.04 DL 0.10 Eq. K1-15
    Side wall local yielding [Kip] 83.75 25.04 DL 0.30 Eq. K1-14a

    Global critical strength ratio 0.83

    ____________________________________________________________
    Connection name : CP_5/8PL_2B3/4
    Connection ID : 10
    ____________________________________________________________

    Family: Column cap (CC)


    Type: Cap Plate
    GENERAL INFORMATION
    Connector

    MEMBERS
    Beam
    General
    Beam section : W 18X35
    Beam material : A992 Gr50
    Built-up : No
    Column
    General
    Support section : HSS_SQR 8X8X3_8
    Support material : A500 GrB rectangular
    Column orientation : Longitudinal

    CAP PLATE
    Connector
    tp: Plate thickness : 0.5 in
    Plate material : A36
    Bolts : 3/4" A325 N
    Lev: Transverse distance to edge : 3 in
    Leh: Longitudinal distance to edge : 1.5 in
    pf: distance bolt centerline-tension flange : 1.5 in
    s: Transverse bolt spacing : 3.5 in
    Hole type on plate : Standard (STD)
    Beam side
    Hole type on beam : Standard (STD)
    Column side
    Weld to support : E70XX
    D1: Weld size to support (1/16in) : 4
    Stiffeners
    Ns: Transverse stiffeners : None

    Design code: AISC 360-10 ASD

    DEMANDS
    Description Ru Pu Mu PufTop PufBot Load type
    [Kip] [Kip] [Kip*ft] [Kip] [Kip]
    ------------------------------------------
    DL 0.00 0.00 12.00 0.00 0.00 Design
    ------------------------------------------

    GEOMETRIC CONSIDERATIONS
    Dimensions Unit Value Min. value Max. value Sta.
    References

    Cap Plate
    Bolt diameter [in] 0.75 -- 1.50 DG4 Sec. 1.1
    Transverse center-to-center spacing (gage) [in] 3.50 2.00 12.00
    Sec.
    J3.3,
    Sec. J3.5
    Transverse edge distance [in] 3.00 1.00 -- Tables J3.4,
    J3.5
    Longitudinal edge distance [in] 1.50 1.00 -- Tables J3.4,
    J3.5
    Beam
    Transverse edge distance [in] 1.25 1.00 -- Tables J3.4,
    J3.5
    Plate (support side)
    Distance from centerline of bolt to nearer surface o... [in] 1.50 1.25
    --
    DG4 Sec. 2.1
    Weld size [1/16in] 4 3 -- table J2.4

    DESIGN CHECK
    Verification Unit Capacity Demand Ctrl EQ Ratio
    References

    Cap Plate
    Resulting tension capacity due prying action [Kip] 31.74 15.16 DL 0.48
    p. 9-10
    Beam
    Bending [Kip*ft] 132.34 12.00 DL 0.09 Eq. F13-1
    Resulting tension capacity due prying action [Kip] 16.03 15.16 DL 0.95
    p. 9-11,
    p. 9-10
    Local web yielding [Kip] 69.84 15.16 DL 0.22 Eq. J10-2
    Web crippling [Kip] 66.37 15.16 DL 0.23 Eq. J10-4
    Compression buckling of the web [Kip] 29.12 15.16 DL 0.52 Eq. J10-8
    Support
    Weld capacity [Kip] 29.70 15.16 DL 0.51 Eq. J2-3
    Side wall local crippling [Kip] 247.78 15.16 DL 0.06 Eq. K1-15
    Side wall local yielding [Kip] 65.55 15.16 DL 0.23 Eq. K1-14a

    Global critical strength ratio 0.95

    You might also like