Scribd
Upload
3K views4 pages

Checklist For Granite/Marble Works: Project: Doc. No.: Client: Project Location

The checklist summarizes the key steps for a granite/marble works project, including pre-laying preparation like cleaning slabs and checking material availability, laying procedures such as setting lines and levels and mixing mortar, post-laying checks like ensuring no stacking on finished surfaces and curing, and spaces for remarks and signatures to approve the work.

Uploaded by

Beni N Solo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
3K views4 pages

Checklist For Granite/Marble Works: Project: Doc. No.: Client: Project Location

The checklist summarizes the key steps for a granite/marble works project, including pre-laying preparation like cleaning slabs and checking material availability, laying procedures such as setting lines and levels and mixing mortar, post-laying checks like ensuring no stacking on finished surfaces and curing, and spaces for remarks and signatures to approve the work.

Uploaded by

Beni N Solo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Checklist for Granite/Marble works

Project : Doc. No. :


Client : Project Location :

SITE LOCATION

BEFORE LAYING

1 Cleaning slab off loose mortar/ material, Button marking

2 Availability of Material - Sand, Tiles

3 Proper Stacking of Granite/Marble

4 Quality of Granite/Marble/ Sand

DURING LAYING

1 Drg. No./ Date as per which pattern given /Start point

2 Line/ Level fixed, checked & Slopes are as per requirement

3 Proportion of bedding mortar Mixing in A/2 tray

4 Check for grinding & polishing process

Clearing for joints/ workmanship / Any nosing particularly for


5 washbasin & Kitchen counter

AFTER LAYING
1 No material stacked after fixing?

2 Finished surface cleaned properly before polishing

3 Check for any hollow sound

4 Are there any Cracked, should be replaced

5 Curing for four days after Laying

Remarks of Quality Assurance Engineer:

Signature Date Remarks/ Comments


Checked By:
Approved By:
QA/CL-CON/

DATE

YES NO NA
ks/ Comments

You might also like