0% found this document useful (0 votes)
547 views2 pages

Blank Pdi Sheet

1. The document is a pre-delivery inspection checklist for a Suzuki Wagon-R vehicle being delivered to a customer in Jhelum, Pakistan. 2. The inspection covers various mechanical and electrical components both inside and outside the vehicle. 3. Any issues found during the inspection are to be noted on the checklist and repaired using the appropriate service manuals. 4. Once completed, the inspection sheet is to be signed by the inspector and service manager and kept on record by the dealership for potential future reference.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
547 views2 pages

Blank Pdi Sheet

1. The document is a pre-delivery inspection checklist for a Suzuki Wagon-R vehicle being delivered to a customer in Jhelum, Pakistan. 2. The inspection covers various mechanical and electrical components both inside and outside the vehicle. 3. Any issues found during the inspection are to be noted on the checklist and repaired using the appropriate service manuals. 4. Once completed, the inspection sheet is to be signed by the inspector and service manager and kept on record by the dealership for potential future reference.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
You are on page 1/ 2

PAK SUZUKI MOTOR COMPANY LIMITED

AFTER SALES DEPARTMENT


PRE-DELIVERY INSPECTION CHECK SHEET Date: 02\03/2019

USER NAME HASSAN SALEEM


Chassis No. A1J310PK10083104 PK10B183104
ADDRESS GALI DISPENSERY MOHALLAH SHEIKHAN DINA Engine No.
Delivery Date \ 17\02\2019
DISCTRICT JHELUM
Model Description SUZUKI WAGON-R A1J310 Model Code A1J310-321
VXL MC 998 CC
Phone 0310-9521000 Dealer's Name SUZUKI JHELUM RIVER MOTORS

If any job found necessary, show the job by using the following mark in JOB  when the items are checked OK. Mark þ in job ¨
Use the appropriate manuals for procedures of each Job. As to the items which are confirmed OK after the job mark  in OK ¨
ü Checked A: Adjust C: Clean T: Tighten R: Repair X: Replace L: Lubricate
l

UNDER HOOD JOB OK OUTSIDE JOB OK


1 Chassis No. & Engine No. *1 Hood (fixing, lock)
2 I. D. Plate Chassis No. & Engine No. 2 Doors (operation)
3 Coolant (leakage, level) 3 Rear view mirrors
4 Engine oil (leakage, level) 4 Tank cap (fuel)
5 Transmission oil (leakage, level) 5 Spare tire (fixing)
6 Windshield washer (leakage, level) *6 Fuel lid / Trunk Lid opener (operation)
7 Brake Oil (level) 7 Overall appearance (dents, scratches etc.)
8 Power Steering Oil (level) **8 I.D. Plate & CNG stickers (front & rear)
9 Battery (fluid level & terminal fixing)
UNDER BODY
10 Water pump belt-tension
1 Transmission, Transfer and Differential oil (leakage)
*11 A/c belt tension
2 Brake line / fuel line (leakage)
12 Idle speed
3 Tires (damage, air pressure)
**13 CNG parts / connections
4 Exhaust system
14 Harness, Cables & electrical connections
5 Wheel hub and shaft nuts / bolts (check marking)
INSIDE ROAD TEST
1 Steering wheel (play, lock, alignment) Tilt
1 Engine start / operation
2 Pedals (operation, travel, play)
2 Clutch (operation)
3 Parking brake lever (stroke)
3 Gearshift lever (operation)
4 Switches
4 Brake (operation)
[Ignition, Lights (lighting, turn signal, hazard, engine oil and charges
Indicator, hand brake, foot brake, back up lamp Horn, Wiper, Washer, 5 Steering (operation)
Blower, defogger Cigarette lighter, Clock] 6 Meters and Gauges
5 Choke control knob 7 Engine old and charging indicator lights
*6 A/c. drain pipe (fixing) 8 Body noise
*7 A/c. / Heater (function) **9 Fuel mode switch / CHG fuel indicator (function)
*8 Ventilation and CIRC-FRESH knob 10 Engine idle level.
9 Room mirror (operation)
OTHERS
10 Sun visor (operation)
1 Jack, Jack handle, Tools and Literatures
*11 Radio / Cassette player / Antenna
2 Information labels (detachment)
12 Glove box (lock)
3 Washing and Cleaning
13 Seats (fixing), Folding
4 Explaining for the customer
14 Seat belt (tighten, damages, lock)
5 Check out
15 Doors (latches, lock, key function)
16 Windows (operation)
*17 Power window, mirror & central locking (function)

* As to the mechanism or parts marked as * in the


Above list, some vehicle are provided with them and Inspector's Signature
Some are not depending on model or specification
Differences.
** Application to CNG kit fitted vehicles only. Service Manager's Signature / Stamp

Important: PSMCL Dealer Must keep this sheet completely filled for 1 year and has to show it to SUZUKI
PSMCL service representative as and when requested.

DEALER COPY

SER-4-009 REV-01 SEP 2003

You might also like