Scribd Logo
Upload

Welcome to Scribd!

  • 111 views

    FAQ Tool Eng (3361902)

    Uploaded by

    SagarDamani
    This document contains frequently asked questions (FAQs) about tool engineering at Alpha College of Engineering & Technology's Department of Diploma Mechanical Engineering. It covers topics such as tool design, types of tools and tool materials, tool geometry, tool holders, locating and clamping devices, jigs and fixtures, press tools, dies and molds. The FAQs provide definitions and explanations of key concepts and components within each of these areas of tool engineering.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    FAQ Tool Eng (3361902)

    Uploaded by

    SagarDamani
    111 views3 pages
    This document contains frequently asked questions (FAQs) about tool engineering at Alpha College of Engineering & Technology's Department of Diploma Mechanical Engineering. It covers topics such as tool design, types of tools and tool materials, tool geometry, tool holders, locating and clamping devices, jigs and fixtures, press tools, dies and molds. The FAQs provide definitions and explanations of key concepts and components within each of these areas of tool engineering.

    Original Description:

    Hhajajajammsmksnsjsjsjsjjejendndj

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains frequently asked questions (FAQs) about tool engineering at Alpha College of Engineering & Technology's Department of Diploma Mechanical Engineering. It covers topics such as tool design, types of tools and tool materials, tool geometry, tool holders, locating and clamping devices, jigs and fixtures, press tools, dies and molds. The FAQs provide definitions and explanations of key concepts and components within each of these areas of tool engineering.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    111 views3 pages

    FAQ Tool Eng (3361902)

    Uploaded by

    SagarDamani
    This document contains frequently asked questions (FAQs) about tool engineering at Alpha College of Engineering & Technology's Department of Diploma Mechanical Engineering. It covers topics such as tool design, types of tools and tool materials, tool geometry, tool holders, locating and clamping devices, jigs and fixtures, press tools, dies and molds. The FAQs provide definitions and explanations of key concepts and components within each of these areas of tool engineering.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    ALPHA COLLEGE OF ENGINEERING &TECHNOLOGY

    DEPARTMENT OF DIPLOMA MECHANICAL ENGINEERING
         

                                                             FAQ OF TE

    INTRODUCTION
    Q.1 Explain Concept of tool , tool design and tool engineering.
    Q.2 Explain tool Engineering department.
    Q.3 Explain types of tools, classification and features and application.
    Q.4 Explain Tool geometry with fig.
    Q.5 Give definition of tool signature. And write tool angles.
    Q.6 Expain twist drill geometry.
    Q.7 Explain function of tool engineering.
    Q.8 Expain importance to get productivity quality.

    CUTTING TOOLS AND TOOL HOLDERS

    Q.9 Give types of cutting tool material in manufacturing system and


    explain any three.
    Q.10 What is an oxide tool? Why oxide tools are used, explain it.
    Q.11 Explain coated carbides and UCON tool material.
    Q.12 Properties desired in tool materials.
    Q.13 Explain tool steel alloys and their effects.
    Q.14 Criteria for selection of tool materials.
    Q.15 Why heat treatment is necessary for tool material. Explain it.
    Q.16 Explain simple grinding machine and universal tool cutter
    grinder.
    LOCATING AND CLAMPING DEVICES

    Q.17 Explain locating and clamping principles.


    Q.18 Explain internal locators,pin locators,v- block locators,fixed stop
    locators.
    Q.19 Explain c- washer,screw clamp ,Toggle clamp.
    Q.20 Explain Degree of freedom. Explain concept and importance.
    Q.21 Explain 3-2-1 principle of location.
    Q.22 Explain Full proofing and ejecting.
    Q.23 Explain wedge clamp and Power clamp.

    JIGS AND FIXTURES

    Q.24 Give defination of jigs and fixtures. Give list of general principal
    of jigs and fixtures design.
    Q.25 Give difference between jigs and fixtures.
    Q.26 Explain types of jigs ,sketches with working and application of
    jigs.
    Q.27 Explin jig bushes with fig.
    Q.28 Explain types of Fixtures,Sketches with nomenclature,working
    and application and application of fixtures
    Q.29 Explain Broaching fixtures,Assembly fixtures.
    Q.30 Explain Welding fixtures,milling fixtures.
    PRESS TOOLS

    Q.31 Explain various press working operation and application with


    Sketches.
    Q.32 Classify press tool working with fig and list the components of
    press tool.
    Q.33 Classification of press tools.
    Q.34 Define and explain tonnage 1) tonnage capacity 2) shut height
    Q.35 Define center of pressure and explain its any one methods.
    Q.36 Define die clearance and Explain effects of clearance.
    Q.37 Explain methods of reduce cutting forces with fig.
    Q.38 State the function of stock stop and classify stock stop and
    explain any one.

    DIES AND MOULDS

    Q.39 Explain bending . and explain v- bending.


    Q.40 Explain edge bending. With fig.
    Q.41 Explain parts and function of bending dies.
    Q.42 What is Bend radii and explain bend allowance.
    Q.43 What is spring back and write Criteria deciding the selection of
    bend of radii and allowances.
    Q.44 Method to compute bending pressure.
    Q.45 Expain Drawing dies ,types with fig.

    You might also like