Scribd
Upload
463 views2 pages

RB8ES202

The EKC 102 controller series is used for temperature and defrost control in refrigeration and air conditioning applications. It has an IP65 rating and integrated mounting brackets for easy panel installation. Programming is simplified with a "Copy key" that can save up to 25 setup configurations. High-effect 16A relays allow direct connection of heavy loads like compressors without intermediate relays.

Uploaded by

Taufan Justvands
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
463 views2 pages

RB8ES202

The EKC 102 controller series is used for temperature and defrost control in refrigeration and air conditioning applications. It has an IP65 rating and integrated mounting brackets for easy panel installation. Programming is simplified with a "Copy key" that can save up to 25 setup configurations. High-effect 16A relays allow direct connection of heavy loads like compressors without intermediate relays.

Uploaded by

Taufan Justvands
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

EKC 102 Temperature controller series

EKC 102 controllers for panel mounting are used for temperature and defrost
control via pump-down or start/stop of compressor.
IP 65 rating guaranteed: Danfoss’ innovative plastic moulding technology has
made it possible to integrate push buttons and front packing in the controller’s
front panel.
Easy installation: Integrated mounting brackets ensure easy and effortless
panel installation.
Simple installation: High-effect 16A relays enable direct connection of heavy
loads, such as compressor or defrost elements without use of intermediate
relays.
Quick and easy programming: The ”Copy key” programming key with room for
25 controller setups ensures a quick and easy factory programming.

REFRIGERATION AND
AIR CONDITIONING
Functions
Thermostat Other functions
• ON/OFF thermostat • The S5 sensor can be used for monitoring of condenser
• Sensors: Danfoss Pt1000, PTC1000 or NTC5000 temperature or as product sensor (version 102B+102D)
• Calibration of sensors • Door function with alarm monitoring
• Day/night control • Manual control of outputs
• Alarm thermostat with delays • Delay of outputs at power up
Defrost Display & Programming
• Electrical or natural defrost • High-efficient LED display with icons for indication of
• Start via DI input, time interval or display operational status. Parameter settings/readouts and alarm
• Defrost on demand conditions can be read on the display.
• Stop on time or temperature • ”Copy key” programming key with room for 25 different
controller setups
Compressor
• Anti cycle timers for optimum compressor protection Fan (102D only)
• High-effect 16A relays for connection of compressors without • Fan delay during defrost
use of intermediate relay • Fan stop when compressor cuts out
• Control of 2 compressors (version 102B) • Fan stop at high S5 temperature
Multipurpose DI input
• Multipurpose DI input for defrost start, day/night control, door
alarm or main switch

Advantages

Simple installation:
High-effect 16A relays enable direct IP 65 rating guaranteed:
connection of heavy loads, such as Integration of push buttons and
compressors or defrost elements packing in the controller’s front panel
without use of intermediate relays ensures a cleaning-safe tightness.

Quick and easy programming:


Quick and easy installation: The ”Copy key” programming key
The integrated mounting bracket can save up to 25 different controller
in the controller’s housing ensures setups. A valuable tool when control-
quick and easy installation of the lers have to be programmed without
panel. risk of errors.

Electric connections and applications


Below example is showing electrical wiring diagram for EKC 102D.
The table on the right hand side shows an overview for all
controllers

Outputs Inputs
Controller
DO1 DO2 DO3 Sair S5 DI
EKC 102A •
EKC 102B 1 2 / • • •
EKC 102C / • • •
EKC 102D • • •

Danfoss A/S, DK-6430 Nordborg, Denmark, Tel. +45 7488 2222, Fax +45 7488 5757, www.danfoss.com
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alternations can be made without subsequential changes being necessary in specifications already agreed.
All trademarks in this material are property of the respecitve companies. Danfoss and Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

RB8ES202 Produced by Danfoss DE-BD 09-2006

You might also like