0% found this document useful (0 votes)
688 views9 pages

2pac Bm1384 Usb Setup Guide

This 9-page user guide summarizes the setup and use of the 2PAC BM1384 USB stick miner, which features two Bitmain BM1384 chips providing 15+ GH/s of hashing power. It describes connecting the miner via USB to a powered hub, installing cgminer and drivers on Windows, Linux, and Debian, basic troubleshooting steps, and acknowledges contributions from the Bitcoin forum community.

Uploaded by

pedro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
688 views9 pages

2pac Bm1384 Usb Setup Guide

This 9-page user guide summarizes the setup and use of the 2PAC BM1384 USB stick miner, which features two Bitmain BM1384 chips providing 15+ GH/s of hashing power. It describes connecting the miner via USB to a powered hub, installing cgminer and drivers on Windows, Linux, and Debian, basic troubleshooting steps, and acknowledges contributions from the Bitcoin forum community.

Uploaded by

pedro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

2PAC BM1384 USB Stick Miner User Guide

Last updated: 7/5/2015


Page 1 of 9

GekkoScience

2PAC BM1384 USB Stick Miner

Page 1 / 9
2PAC BM1384 USB Stick Miner User Guide
Last updated: 7/5/2015
Page 2 of 9

Contents
1. The First Glance . ....................................................................................... 3

2. Accessories & Connection . ....................................................................... 3

3. Setup (Wndows) . . . . ................................................................................. 4

4. Setup (Linux) . . .......................................................................................... 6

5. Setup (Debian) . . . ..................................................................................... 6

6. Basic Troubleshooting . . . . . ...................................................................... 7

7. VCore Frequency and Power Draw/Current . . . ......................................... 9

8. Acknowledgements . . . . . ......................................................................... 10

Page 2 / 9
2PAC BM1384 USB Stick Miner User Guide
Last updated: 7/5/2015
Page 3 of 9

1. The First Glance


Currently the most efficient USB miner ever manufactured, the 2PAC
Compac features 2 Bitmain BM1384 chips (this is the same chip as in the
Bitmain S5). It has a fully adjustable regulator design that gives you a core
voltage range of 550mV to 800mV. Typical hasrate is 15+gh/s depending
on clock rate. Efficiency is 0.31-0.35 watts per gh

2. Accessories & Connection


2.1 Accessories
You will need a powered USB hub that is capable of supplying at least 1.0
- 2.0 amps per port.

2.2 Connection
a) Connect your USB hub to your host computer. Make sure the power
adapter is plugged in as well.
b) Insert the 2PAC BM1384 USB Stick Miner into the USB hub via the
USB port. Please note:
Connection order must be “a)” first, and then “b)”. Order cannot be
reversed.

Page 3 / 9
2PAC BM1384 USB Stick Miner User Guide
Last updated: 7/5/2015
Page 4 of 9

3. Setup (Windows)

Download cgminer and zadig winUSB driver to your computer.

VH Modified cgminer from here:


http://23.108.83.14/images/cgminer-4.10.0-windows-gekko-b682468.7z

Zadig WinUSB Driver:


http://zadig.akeo.ie/

1> Plug in your 2Pac BM1384 USB miner.


2> Open Zadig and click “Options -> List All Devices”

Page 4 / 9
2PAC BM1384 USB Stick Miner User Guide
Last updated: 7/5/2015
Page 5 of 9

3> Select 2Pac BM1384 Bitcoin Miner, and then click “Replace Driver”

4> If it is successful you will see the following message:

5> Run cgminer following commands below:


cgminer.exe --gekko-2pac-freq 200
-o stratum+tcp://solo.ckpool.org:3333
-u (your username here) -p (your password here)

Page 5 / 9
2PAC BM1384 USB Stick Miner User Guide
Last updated: 7/5/2015
Page 6 of 9

4. Setup (Linux)

Linux cgminer build steps


Ubuntu 16.04.1 LTS new install.
Default Install (+OpenSSH server)

Code:
sudo apt-get update
sudo apt-get upgrade -y

sudo apt-get install -y build-essential git autoconf automake libtool pkg-config libcurl4-openssl-dev libudev-dev

mkdir -p git/vthoang; cd git/vthoang


git clone https://github.com/vthoang/cgminer.git
cd cgminer

CFLAGS=”-O2 -march=native” ./autogen.sh --enable-gekko


make -j 2

5. Setup (Debian)

Debian 8.7.1 new install.

Default Install (No desktop environment, + SSH Server)


(*do not specify root password to enable sudo)

or Raspbian - Kernel version: 4.4 (Raspberry Pi)

Code:
sudo apt-get update
sudo apt-get upgrade -y

sudo apt-get install -y build-essential git libusb-1.0-0-dev libusb-1.0-0 libcurl4-openssl-dev libncurses5-dev libudev-dev screen
libtool automake pkg-config libjansson-dev

mkdir -p git/vthoang; cd git/vthoang


git clone https://github.com/vthoang/cgminer.git
cd cgminer

CFLAGS=”-O2” ./autogen.sh --enable-gekko


make -j 2

Page 6 / 9
2PAC BM1384 USB Stick Miner User Guide
Last updated: 7/5/2015
Page 7 of 9

6. Basic Troubleshooting (Q&A)

Q: Does the miner need cooling?

A: If you run the miners over about 100MHz it is strongly advised to cool them with
a fan. The cooling requirements are fairly low and unless you’re trying to run
250MHz or above almost any fan at all will do.

Q: Can I run this cgminer build with the original Compact?

A: Yes. The original Compac will register with separate device name from the
2pac.

Q: How can I set a different frequency for the 2Pac vs the Compac?

A: cgminer will accept the following parameters for the stick.


--gekko-2pac-freq 150

Q: I have compac sticks running with my 2Pacsticks How do I set the freq?
A: cgminer will accept the following parameter for the stick
--gekko-compac-freq 150

Q: How many 2Pac(s) can I run at a time?

A: You can run as many as your USB hub can power. Please remember you will
need a powered USB hub that can do 1-2 amps per port for all the ports you wish
to use.

Q: How do I get the latest version of the driver and code?

A: Updates to main cgminer and gekko updates will be checked in regularly.


If you are following along with the instructions, enter the cgminer directory, pull and
rebuild:

cd ~/git/vthoang/cgminer/
git pull
...

Q: How to get past the “USB init, open device failed” and “you don’t have
privilege to access” ?

A: Use the following code:


cd ~/git/vthoang/cgminer/
sudo usermod -G plugdev -a `whoami` su-
do cp 01-cgminer.rules /etc/udev/rules.d/
sudo reboot

Page 7 / 9
2PAC BM1384 USB Stick Miner User Guide
Last updated: 7/5/2015
Page 8 of 9

7. VCore Frequency and Power Draw/Current

Please refer to the below table for rough guide to power and current draw
according to frequency.

Predicted GH Speeds Vs Frequency

Freq GH Vcore Power J/GH


100 11.00 1.26 3.67 0.33
125 13.75 1.26 4.48 0.33
150 16.50 1.26 5.27 0.32
175 19.25 1.26 6.12 0.32
200 22.00 1.32 7.43 0.34
225 24.75 1.36 8.73 0.35
250 27.50 1.40 10.11 0.37
275 30.25 1.46 12.25 0.40
300 33.00 1.50 13.98 0.42

Page 8 / 9
2PAC BM1384 USB Stick Miner User Guide
Last updated: 7/5/2015
Page 9 of 9

8. Acknowledgements

This setup guide could not have been put together without the help and
contribution of many people. Big thanks to the following people on
bitcointalk.org forum:

vh
sidehack
klintay

Following bitcointalk.org threads;

GekkoScience 2Pac BM1384 Stickminer Official Support Thread


https://bitcointalk.org/index.php?topic=1764803

GekkoScience 2PAC - 2x BM1384 USB Stick Miner


https://bitcointalk.org/index.php?topic=1718358

Page 9 / 9

You might also like