

Experiments play a crucial role in the progress of science. A large number

of path breaking discoveries and inventions have been possible through
investigations done usually in laboratories. The experimental work is,
therefore, an essential component of any course in science. A course on
practical work in science curricula in schools at the secondary stage is
essentially designed to acquaint the learners with the basic tools and
techniques used in a science laboratory. It also envisages developing
problem-solving skills. These skills help the learner to acquire ability to
identify a problem, to design and to set up the experiment, to collect and
analyse data through experiment, and to interpret data to arrive at plausible
solution in due course of time. These are, in fact, the long term objectives
of laboratory work and become the nucleus of the philosophy of construction
of knowledge by the learner.
A school science laboratory is a place where basic experimental skills
are learnt by systematically performing a set of prescribed and suitably
designed experiments. Performing experiments by one’s own hands is not
only a thrilling experience but is also important because it entails learning
by doing. It also facilitates understanding the concepts of science.
The experiments and project work suggested at the secondary stage intend
to develop basic skills of measurement; handling of some common
measuring instruments, equipment and chemicals; setting simple
apparatus; handling microscope and preparing slides; making observations;
collecting data and presenting it in appropriate format; interpreting and
drawing conclusions; and preparation of report.
There are certain rules and regulations that every student must be
familiar with before undertaking practical work in a laboratory. A student
is required to be acquainted with the general facilities and the equipment
available in the laboratory and follow the rules and regulations. Generally,
in the beginning of the session, the teacher takes the students around the

17-04-2018
 

laboratory to familiarise them with the general facilities available in the

laboratory and tells them about certain do’s and don’ts while performing
the experiments in the laboratory.
Laboratory Manual – Science for Class X is an exercise to familiarise
pupil with the general facilities, equipment, measuring instruments,
chemicals and glassware, specimen available in a school science laboratory.
The precautions and measures for safety to be observed in a laboratory are
also mentioned. The format adopted for description of experiments includes
the aim of the experiment, theory or the principle involved in the experiment,
list of materials required on the basis of theory given to perform the
experiment, steps involved in performing the experiment, recording
observations, the formula required for calculations and stating the results.
An emphasis on drawing conclusions and initiating discussions is also
made. Though the precautions that are necessary to be taken care of in
performing the experiments have been merged with the procedure itself,
these along with the possible sources of errors are also mentioned separately
with more reasoning. There could be some certain prerequisites for
preparing the laboratory for performing an experiment, and additional
information to teachers on a particular experiment. Such issues have been
raised in almost all experiments in column titled Note for the Teacher.
Authors have also used this column to communicate with teachers. It is
hoped that teachers would find this column useful. The method used in
the experiment may also be used to extend understanding in some
applications. A column titled Applications has been added occasionally for
addressing such issues. At the end of every experiment some thought
provoking questions are also included. These questions are based on the
procedures involved in the experiment. Many questions provoke pupil for
relating their everyday life experiences with scientific principles. It is believed
that such questions will be helpful in inculcating scientific temper and
attitude among students. In these write-ups, it can be seen that the columns
such as Materials Required and Note for the Teacher often address the
issues related with the alternate materials and even alternate procedures
that can be used for performing the experiment. It is however important to
mention that the suggestions given for conducting the experiments are
suggestive and may be modified depending on the facilities available in a
particular situation. For example, if the material suggested for a particular
experiment is not available, a suitable alternate material may be used. In
addition to these experiments, a student may also conduct any other
experiment of interest. However, it is important that every student of science
must pay proper attention to the practical work and should try to acquire
basic laboratory skills and develop a keen sense of observation and acquire
a sound training in the reporting of the work done. Many experiments are so
chosen that these can be performed using low cost and locally available
materials without loosing the rigor of science. The suggestions for maintaining
the equipment have also been given wherever possible.


17-04-2018
 

Questions at the end of each experiment may be dealt with meticulously

and must be discussed with peers and teachers to arrive at appropriate
and convincing answers.
At the end of this manual some suggestive projects have been listed.
This list is on the basis of existing science syllabus at the secondary stage.
A few projects are also being presented in detail.


In a science laboratory, we usually find working tables, some items
of common utility and space for storing equipment, chemicals and
glassware. The working tables in a science laboratory are usually
provided with:
• Sinks with water taps for washing purposes and liquid waste disposal.
It is expected that the students will use taps only when required and
will not waste water. A regular cleaning of sinks is essential.
• Reagent columns for keeping bottles of chemicals and reagents of
frequent use. These reagent bottles are arranged in a definite order.
• Heating facilities provided in the form of gas taps fitted with a burner
or spirit lamp. A gas tap should be opened only when the gas is required
for lighting the burner. Leakage, if any, should be immediately brought
to the notice of the teacher or other laboratory staff. Every laboratory
must be equipped with a few fire extinguishers fixed at
convenient places.
• In the science laboratory, the equipment and glassware of common
use are stored separately in an almirah. They are generally issued to
the students at the time of performing experiments.
• In some laboratories, equipment like balances and microscopes may
be permanently placed in a place as these are used quite frequently.
The type of balance used depends on how accurate the weighing must
be and what to balance? At secondary stage, a physical balance is a
good choice. Teachers are advised to train students appropriately to
use a physical balance before they are asked to perform experiment
that requires weighing measurements (Fig. 1). For weighing powders
or solid materials, one must use weighing tubes or butter paper
depending on the nature of the material. The pan of the balance must
be kept clean. The microscopes (Fig. 2) must be placed near the window
to ensure the availability of sufficient sunlight needed.
• A water distillation plant should also preferably be installed in the
laboratory. However a proper arrangement for water supply and
drainage should also be made close to the place of installation of
distillation plant. Ensure the water supply through the plant before
switching ON the electric power.


17-04-2018
 

Fig. 1 : A physical balance

Fig. 2 : A compound microscope

• Provision for fuming hood or exhaust may be made in the laboratory

for of gases.
• Electrical connections must be provided with all working tables for
performing electricity and magnetism experiments.
• Utility items like soldering rod, hammer, drill machine with drill bits,
pliers, hacksaw, cutter, screw driver set, spanners, torchlight etc.
must be placed at a convenient place inside the laboratory. Common
electrical measuring devices such as a multimeter may also be placed.


17-04-2018
 

Petridish

Trough Woulfe’s bottle

Plastic squeeze bottle Coverslip
Round bottom
(wash bottle)
flask

Bar Magnet

Thermometer
Convex lens Concave mirror Beakers
Slide

Delivery tube
Boiling tube Test tube holder
Test tube

Measuring cylinder

Crucible tongs
Wire gauze
H-base burner
Forceps Tripod stand
Laboratory stand

Galvanometer

Sprit lamp Test tube

rheostat
Magnifing lens brushes

Stop watch

17-04-2018
 

Test tube stand

Resistance box

Needle

Spring balance

Erlenmeyer flasks
(or conical flasks) Funnels

Mortar and pestle China dish

Droppers
Glass tube
Watch glasses Glass rod

Thistle
funnel
Fig. 3 : Common laboratory equipment and glassware
• A demonstration table is relevant for teacher demonstration.
• For the purpose of disposal of solid waste, a dustbin may be provided
either near each working table or at a common place in the laboratory.
• Equipment, glassware, and reagent bottles are kept at proper and
specified place. Some of the common laboratory equipment and
glassware are shown in Fig. 3.

17-04-2018
 


Students must be groomed for laboratory work and experience in order to
benefit from them. Students must know why they are expected to participate
in an activity and what they will derive from it. Science teachers are expected
to facilitate students in arranging pre-laboratory discussion, giving
directions, and post-laboratory discussions.
Pre-laboratory discussion must give students the clearest possible
picture and understanding of what they are to do in the laboratory.
This will help the students concentrate on what they are doing and make
the experience more meaningful. If special equipment or difficult procedures
are involved, the teacher should show the students how to use the
equipment and procedures. Pre-laboratory discussions should be as concise
but meaningful enough to thoroughly orient the students in the laboratory
work. Sometimes these discussions are given a day before the laboratory
period to give students plenty of time for the assigned laboratory activity.
The directions for laboratory exercises must be explicit and clear.
They can be given orally or in written form or discussed during the
pre-laboratory session. Sometimes it may also be helpful to summarise
directions on the blackboard that have already been given.
Students should present and analyze their data during the
post-laboratory discussion. Here the information can be analyzed and
related to the objectives of the experiment. The post-laboratory discussion
is very helpful in broadening students’ understanding the content and
processes of science.


In a science laboratory, the following rules are to be observed by all users:
• Students prepare in advance for the experiment they would perform
in the laboratory.
• Students must accompany/carry their practical notebook, laboratory
manual, geometry box, pencil, sharpener, and eraser to the practical
class regularly. They should also wear laboratory coat or apron, if
available, while working in the laboratory.
• Students follow strictly the instructions given by the teacher and
perform the experiments carefully at the allotted places. They should
not move around unnecessarily in the laboratory. The teacher may
be consulted for any help or guidance. Disposal of reagents must be
done with care.
• All equipment such as microscope, physical balance, measuring items
and glassware must be handled with care and after understanding
their functions.

17-04-2018
 

• Labels on the reagent bottles should be read carefully before using.

The reagent bottles and chemicals must be kept back at their specified
places after use. Cap the bottle with the stopper immediately after
using a chemical reagent. To prevent contamination of reagents glass
rods, filter papers, dropper should never be dipped directly into the
reagent bottles. Partially used material should not be poured back
into the reagent bottles.
• The mouth of the test tube should not be pointed towards any pupil
including you while heating or adding a reagent (Fig. 4).

Fig.4 : Correct method of heating a boilingtube

and to know the smell (or odour)
• For smelling the vapours, fan the vapours gently with your hands
towards the nose (Fig. 5). Avoid direct smelling of chemicals or vapours.
• Acid is diluted by adding water. Never add water to acid. (Fig. 5).
• Do not handle chemicals with hands and do not taste any chemical.
• Keep your working table and surroundings clean. Replace all
laboratory equipment to its assigned place in the laboratory once the
practical work is over.
• Do not eat or drink in the laboratory. Always wash your hands after
the laboratory class.
• Be acquainted with the handling of first aid kit and fire extinguisher.

17-04-2018
 

Measuring cylinder
Concentrated acid

Beaker
Water

Fig.5 : Correct way of adding acid to water for dilution

In case of any accident or injury or breakage of apparatus, report to

the teacher immediately.

 
A first aid kit is an essential part of any science laboratory, which is placed
at an easily accessible place. Accidents occur in the science laboratory
mostly due to the lack of attention. In such a case, first aid treatment must
be provided immediately. The victim should be taken to the doctor, if
required. Some common injuries caused due to accidents and their first
aid treatments are given below.


In the laboratory, burns can be caused due to steam, hot water, acids or
alkali. The first aid treatment required for burns caused due to each one
of them is different. The first treatment to be provided for some of them is
as follows:
• For burns caused by steam or hot water, wash the affected part with
cold running water. Do not use ice. Once the affected part is cool, dry
it gently with clean cloth and then apply an antiseptic ointment.
• For an acid burn, wash the wounded part with water and apply
a dilute solution of sodium hydrogen carbonate. Wash again with
water. Dry gently with a clean cloth and apply an antiseptic ointment.
• For an alkali burn, wash with ample of water to remove all the alkali
and then wash with dilute acetic acid. Dry the affected part with
a clean cloth and apply an antiseptic ointment.

17-04-2018
 


Carefully remove all the visible pieces of glass from the wound. Protect the
wound from dirt and dust. Wash with cold water to remove smaller pieces
of glass sticking to the wound, if any. Control the bleeding by pressing a
clean piece of cotton or cloth on the wound. Apply on antiseptic solution
antiseptic cream. Take the victim to the doctor, if required.


In case of injury to eyes, wash the eyes with cold water. Do not rub the
eyes. Consult the doctor immediately.


One should not run around if clothes catch fire. Immediately lie down on
the floor and roll. If a container with inflammable liquid catches fire while
heating, turn off the gas burner immediately, and take the container away
from all reagents and chemicals. Cover the mouth of the container with a
damp cloth. Fire extinguishers should be used if the fire goes out of control.
In case the fire is because of the short-circuiting of electrical circuits, switch
off the main switch of the electric supply and throw dry soil in the affected
area. Do not use water in such a case.


If gases such as sulphur dioxide, chlorine or bromine are inhaled by any
student, take the student at once to the open air and let the victim breathe
deeply and then inhale ammonia vapours. If the gas inhaled is ammonia,
drink any fruit juice or lemon juice. Inhale dilute ammonium hydroxide if
acid vapours are inhaled.
Report the accident to your teacher immediately to get the medical
attention at the earliest.


Preparing a report on each practical performed in the laboratory and
maintaining a record of the work done is an essential requirement.
The report on each experiment should be such that it informs all steps
involved in performing the experiment and the result obtained. It is therefore
imperative that the report on an experiment should be presented under
different headings so that it is easily understood. A format for presentation
of report is suggested below:



17-04-2018
 


It should explicitly state the objective of the experiment.


It must explain the basic principle(s), laws or theories on which the
experiment is based or which it is meant to verify. Wherever necessary, the
fundamental laws involved in the experiment should be supplemented with
mathematical formulae or equations or with neat and labeled diagrams.


List all equipment, measuring devices and other items or materials to be
used for performing the experiment.


Various steps followed in carrying out the experiment should be mentioned
sequentially under this heading. Labeled diagrams, if any, should be drawn
to present a pictorial view of the experimental set-up.


All observations taken while performing the experiment must be recorded
as observed and properly. This may be in a tabular form, drawings, or
statements or a combination of them depending on the nature of the
observations. All measurements must be expressed with their proper units.


In case, calculations based on the observations are required to obtain the
result of an experiment, correct formulae and units must be used while
substituting the data. All calculations must be carried out carefully.
The result or the answer should be stated with proper SI units. In some
experiments, drawing of graphs may also be required as a part of
calculations.


All results and findings of an experiment must be stated in clear and
unambiguous language.



17-04-2018
 


All the precautions taken or observed while performing an experiment
should be noted and the same should be stated in the report. Although
some of the precautions taken during some experiments may be common,
these usually change from one experiment to another depending on the
nature of the experiment, the available facilities and equipment. In addition
to precautions, the possible sources of errors (that arise because of imitation
of equipment, due to change in atmospheric conditions or any other reason)
should also be stated.
The report on each experiment must begin from a fresh page and a
proper index of the experiments performed should be made in the beginning
of the practical notebook.



17-04-2018