Scribd
Upload
239 views5 pages

Maxplant: Step by Step Tutorial Centum VP

DCS centum VP

Uploaded by

Ahmed Khairy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
239 views5 pages

Maxplant: Step by Step Tutorial Centum VP

DCS centum VP

Uploaded by

Ahmed Khairy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

11/7/2018 The first program CENTUM VP

MaxPlant
Step by step tutorial CENTUM VP
Articles about the project

news Contacts

Peter

Posted on 1/26/2018

Tutorial content

Lesson 2
First program CENTUM VP

The task
Program the logical multiplication circuit of two input signals (from terminals 1 and 2 of the discrete input
module in slot 3 of node 1), transfer the result to the output (terminal 1 of the discrete output module in slot 4
of node 1). Simulate HIS and FCS on one PC.

Decision
1 Open for editing the Control Drawing control circuit:
FCS0101> FUNCTION_BLOCK> DR0001

2 Add a link block with input 1:


Insert> Function Block> Link Block> PIO

3 Set the input address 1:% Z013101

4 Add a link block with input 2:


Insert> Function Block> Link Block> PIO

5 Set the input 2 address:% Z013102

6 Add a logical AND block:


Insert> Function Block> Logic operation Block> AND

7 Set the tag name for the logical multiplication block: AND_2

http://www.maxplant.ru/article/centum_tutorial_02.php 1/5
11/7/2018 The first program CENTUM VP

8 Add a link block with output 1:


Insert> Function Block> Link Block> PIO

9 Set the output address 1:% Z014101

10 We connect the communication unit with input 1 to the terminal Q01 of the AND block:
Insert> Wiring

11 We connect the communication unit with input 2 to the terminal Q02 of the AND block:
Insert> Wiring

12 We connect the output of the AND block with the communication block with the output.

13 When saving a control scheme, the program will be compiled.

14 Click on the HIS0164 and launch the virtual simulator of the operator’s station:
HIS> Virtual HIS

15 Click the FCS0101 and launch the virtual simulator of the control station runtime:
FCS> Test Function

16 Press the STOP button (black square):

http://www.maxplant.ru/article/centum_tutorial_02.php 2/5
11/7/2018 The first program CENTUM VP

17 Press the button EXECUTE (black triangle):

18 At the station, the operator panel of the "Overview" window open visualization Control Drawing View
control circuit status:
Overview Profile> Plant> the TRAINING> FCS0101>% DR0001S010101

19 Use the mouse to double click on the communication block with the first input% Z013101 - the front
panel (Faceplate) of this block opens:

http://www.maxplant.ru/article/centum_tutorial_02.php 3/5
11/7/2018 The first program CENTUM VP

20 Use the mouse to click the [ON] button on the front panel - the state of the first input is set to 1 (the
color of the arrow changes from green to red):

21 Mouse click twice on the communication block with the second input% Z013102 - the Faceplate of this
block opens.

22 Mouse click on the button [ON] - the state of the second input is set to 1.
1 x 1 = 1 - the result is assigned to the output% Z014101:

http://www.maxplant.ru/article/centum_tutorial_02.php 4/5
11/7/2018 The first program CENTUM VP

How easy is it to learn English?


mk.eng-learn.ru
Free Master Class in spoken English ! Accelerated language learning !
Yandex.Direct

Step-by-step tutorial CENTUM VP: Lesson 3

Step-by-step tutorial CENTUM VP: lesson 1

Yandex.Direct

How easy i
English?
To learn more

© Tumanov AV, 2016-2018

http://www.maxplant.ru/article/centum_tutorial_02.php 5/5

You might also like