FB90.

Power (max) 69 kW / 92 HP

Operating weight (max) 8100 Kg

Backhoe digging (max) 5815 mm

The new dimension of comfort

New High Comfort-Total Vision cab

Perfect visibility both when the using the front implement
and the backhoe as well as when travelling on the road.
Excellent internal inhabitability. Easy and safe access to
the operator compartment through the wide side doors and
the antiskid steps. The doors can be secured completely
open or intermediate positions to ensure excellent air
circulation inside the cab. Availability of the air conditioning
system satisfies even the most demanding operator.
All internal linings are easily cleaned scratch-resistant
material.

Excellent positioning of the

transmission control lever
Foot pedal operated accelerator and brake pedals, for
easier operation.

2
New instrument panel
Located to the operator’s right. Complete and easy to
read both when working with the front implement and the
backhoe, it features Italian styling matched with state-of-
the-art technology to ensure.

Oversized
external toolbox

Backhoe controls
Soft and precise backhoe controls are positioned
ergonomically to offer maximum operator comfort and
all-round visibility to the digging area.

3
The new dimension of performance

Great diggability
High ground level swing of over 6.6 m with the TELEVATOR boom to minimise movements when trenching.
204° of bucket opening angle means reducing material filling/dumping.
External play adjustment and cleaning plates on the extensible boom.

New stabiliser
play take-up
with Unisystem
angular
adjustment
The only solution available
on the market that allows
easy and fast recovery
of proper axial play for
increased operating stability
and noise reduction when
travelling.

Standard
locking valves
New Load Sensing hydraulic With a telescopic boom for
maximum operator safety.
system
With the Flow Managing System automatic device and
the elastically suspended Flow Sharing main hydraulic
control valve.
• Totally simultaneous movements
• Fast movements regardless of load applied to each
cylinder
• Soft and responsive controls to ensure perfect
controllability in any job

4
Higher liftability
and breakout
force backhoe
The new design of the
backhoe hinge points to
the frame and the oversized
diameter lift cylinder have
meant further increasing the
unit’s outstanding liftability
by 10% both with the
bucket and the dipper stick
cylinders.
Diggability has also been
increased by 10%.

New hydraulic piping layout on the

backhoe
for maximum operating reliability.
High pressure and slipping resistance Bruiser type backhoe
flex hoses.
Rigid piping for connection to the main hydraulic control
valve.
Front seal hydraulic connections for total elimination of
oil leaks.

5
The new dimension of performance

Engine
New generation 5.0 litre
92 HP emissioned diesel
at the top of its class for
high performance with
the front implement, the
backhoe and when tra-
velling.
An engine capable of gua-
ranteeing high torque at
low rpm and reduced fuel
consumption.
The standard cyclone type
air pre-filter and the tran-
sparent fuel sedimentation
filter also ensure reliability
with purge tap.

Modular Power Shuttle transmission

with torque converter and Finger
Tip type electrical control direction
inverter.
High traction performance for enhanced pushability and
loadability with the front implement.
Reduce travel times: maximums speed 38 km/h.
Its modular design facilitates transmission removal without
having to remove the torque converter too.

6
Automatic 4WD cutout in 3rd and 100% total locking rear axle.
4th gear Locking is actuated by pressing the foot pedal control
Reduced fuel consumption and tyre wear during road provided on the cab floor.
travel. Differential lock is released by raising it.
The push button enables the operator to select the 2 or This feature offers high traction on slippery terrains with
4WD function always cut-in and select 4 wheel braking less tyre slippage/wear as the plus for Users.
with 2WD.

Oversized axles
High design dynamic load
of 7000 Kg/9250 Kg at 40
km/h ensures top reliabi-
lity in any application.
22° front axle oscillation,
a performance at the top
of the unit’s class.

7
The new dimension of performance

Bucket implement
single lever
control
With integrated, easy and
precise control of the
supplementary hydraulic
function.
Its excellent location also
allows installation as stan-
dard equipment of a seat
with armrests for increased
operator comfort.

Increased front implement performance

The new Load Sensing hydraulic system has increased breakout force by 10% to 6300
Kg and liftability by 14% to 3600 Kg to guarantee more productivity on tough terrains
and in pallet handling.
Outstanding load performance
• 3530 mm height at the bucket pin
• 790 mm reach with the bucket in the dump position
A real wheel loader’s performance.

LTS OFF LTS ON

Electromagnetic
boom lift limiter
VIBRATIONS

LTS electronic pitch control device

The Load Travel Stabiliser is supplied as optional equipment.
It is vital got hauling loose material over rough terrain and during loader travel. Pitching
is damped and reduced by a nitrogen accumulator connected to the lift cylinders. The
operator can work and travel faster.
In essence, more production and greater comfort.

8
Specifications

Engine Brakes
Maximum power (ISO TR 14396) . . . . . . . . 92 HP / 69 kW Service: oil bath multidiscs type, hydraulically controlled. A
Net flywheel power (SAE J1349) . . . . . . . . 85 HP / 64 kW double pedal with independent splitted circuit acts on the
Net flywheel power (DIN 70020). . . . . . . . . . . . . . . . 64 kW rear wheels.
Net flywheel power (ISO 9249). . . . . . . . . . . . . . . . . 64 kW The braking action on only one pedal causes a remarkable
Net flywheel power (EEC 80/1269) . . . . . . . . . . . . . 64 kW reduction of turning radius.
Make and model . . . . . NEW HOLLAND - 5.0 NA - 450/NB Completely braking action on the four wheels using the two
Type: . . naturally aspirated, direct injection, 4 cycle diesel pedals simoultaneously.
Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Discs diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 mm
Bore and stroke . . . . . . . . . . . . . . . . . . . . . . 112 x 127 mm Total function area.. . . . . . . . . . . . . . . . . . . . . . . . 2878 cm2
Displacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4987 cm3 Parking: discs type acting on the rear axle. With mechanical
Governed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2200 rpm control, lever controlled.
Maximum torque at 1400 rpm . . . . . . . . . . . . . . . 345 Nm
Forced lubrication with gear type pump. Tyres
4 wheel drive
Front . . . . . . . . . . . . . . . . . . . . . . . . . . 12.5/80 - 18 (12 PR)
Electrical system Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.4 - 26 (12 PR)
2 wheel drive
Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 V Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11L - 16F (10 PR)
Maintenance free battery . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.9 - 28 (12 PR)
- rating (900 CCA). . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Ah
Starter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 kW
Alternator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 A
Steering
Type: load sensing with priority valve powered by one of the
two pumps.
Torque converter Steering is possible with the engine cut out.
Hydraulic pump:
Type . . . . . . . . . . . . . . . . . . . . . . single stage, single phase - delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 l/min
Torque multiplication . . . . . . . . . . . . . . . . . . . . . . . . . . 2.31:1 - max. operating pressure . . . . . . . . . . . . . . . . . . . 140 bar
Steering cylinder: 1, double effect countershaft type
Steering radius:
4 wheel drive 2 wheel drive
Transmission - with brakes on
external front wheels 4000 mm 3700 mm
Type: 4F x 4R totally synchronized gearbox with hydraulic - with brakes off
reverser electrically and hydraulically controlled. external front wheels 5000 mm 4700 mm
4 wheel drive
Speed in kph Forward Reverse
1st 6.4 7.6
2nd 10.3 12.3 Hydraulic system
3rd 21.9 26.2
4th 39.0 46.4 “Load Sensing” with double hydraulic pump and “pres-
2 wheel drive sure compensated” hydraulic control valve with F.M.S.
Speed in kph Forward Reverse Flow Managing System device.
1st 6.2 7.5 Absolutely simultaneous and homogeneous movements
2nd 10.0 12.0 whatever the application load and engine rpm.
3rd 21.4 25.7 Hydraulic pump, delivery . . . . . . . . . . . . . . . . . . . 160 l/min
4th 38.0 45.0 Maximum operating pressure . . . . . . . . . . . . . . . . . 210 bar
Safety: Front seal O-rings.
direction change control lever locked in neutral. Front loader.
Single lever control with stop in float position.
Safety: bucket control lever lock in neutral position.
Optional LTS anti-pitching device.
Backhoe.
Axles Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . side shift
Boom and swing control with two crossed path levers.
Rear
Rigid bearing structure, complete with bevel gear, differen- Independent stabilisers actuated by two levers.
tial and epicyclical reduction gears. Differential can be loc-
ked with the machine on the move.
Front Capacities
4 wheel drive: steering and oscillating, complete with bevel
gear, differential and epicyclical reduction gears. Engine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . litres
2 wheel drive: steering and oscillating, differential and epi- Lube oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
cyclical reduction gears. Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Oscillation Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
4 wheel drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22° Trasmission
2 wheel drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22° Gear box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Wheel base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2175 mm Rear axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Electrical-hydraulic type double traction cutin/cutout actua- Front axle (4 wheel drive) . . . . . . . . . . . . . . . . . . . . . . . . 7.5
ted hydraulically with a push button in the cab. Automatic Front axle (2 wheel drive) . . . . . . . . . . . . . . . . . . . . . . . . 0.4
4WD cutout in 3rd and 4th gear. Hydraulic system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

9
Loader
Performance - Dimensions (mm)

45°

L P
T
N
O S

M 39°
23°

R
Q

2 wheel drive 4 wheel drive

version version

L) Bucket at max. height mm 4325 4425

M) Digging depth mm 170 60

N) Hinge pin height mm 3460 3530

O) Dump height mm 2735 2790

P) Reach at max. height mm 820 820

Q) Max. transport length with bucket on ground mm 5720 5720

R) Wheel base mm 2175 2175

S) Cab height mm 2950 2880

T) Transport height mm 4000 3890

U) Transport width mm 2430 2430

Breakout force kg 6300 6300

Lifting capacity at top height kg 3550 3430

Loader buckets
Type HD standard All-purpose With log forks
3
Capacity m 1.0 1.0 1.0
Width mm 2250 2250 2250
Weight with teeth kg 440 600 745

10
Loader
Performance - Dimensions (mm)

A H

I
B

14°

F
G
E

2 wheel drive version 4 wheel drive version

Backhoe type Standard Televator (exten.) Standard Televator (exten.)
A) Bucket pin distance at top height mm 2115 2730 2115 2730
B) Bucket rotation angle
Speed hole 204° 204° 204° 204°
Power hole 160° 160° 160° 160°
C) Max. cutting height mm 5650 6470 5550 6300
D) Max. dump height mm 3820 4590 3750 4490
E) Digging depth (SAE) mm 4200 5400 4270 5500
Max. digging depth mm 4520 5800 4605 5815
F) Reach from swing center mm 5560 6670 5565 6675
G) Reach from rear axle mm 6890 8060 6890 8000
H) Width at stabilizers (work) mm 2790 2790 2790 2790
I) Width at stabilizers (transport) mm 2280 2280 2280 2280
Breakout force:
bucket cylinder daN 5630 5630 5630 5630
dipper stick daN 4200 2800 4200 2800
Lifting capacity inside
dipper stick reach (ISO) kg 2080 1470 2080 1470
Lifting capacity with dipper stick at 3.66 m
from ground level (ISO) kg 2100 1480 2100 1480
Operating weight (with 6 in 1 bucket) kg 7310 7720 7470 8100

Backhoes
Struck capacity SAE J 296 Width Weight
litres mm kg
76 305 108
109 457 130
153 610 160
196 762 180
238 914 208

11
 At your dealership

The information contained in this catalog is supplied for information only. The manufacturer may introduce changes to the models described
herein at any time for technical or commercial reasons. The illustrations of this document do not necessary show the product in the standard
version. For further information Customers are kindly required to refer to the closest Dealership.

Published by FIAT KOBELCO CONSTRUCTION MACHINERY S.p.A. - http://www.fiatkobelco.com - Stampato n. 20000 - INB
LEADER Firenze - Printed in Italy - 7/02

w w w. f i a t k o b e l c o . c o m