Food Service

FOOD SERVICE FACILITIES PLANNING
B.Sc.
(Catering Science and Hotel Management)
Third Year, Paper X
School of Distance Education

Bharathiar University, Coimbatore - 641046
Copyright 2009, Bharathiar University
All Rights Reserved
Compiled and Printed

by
FRONTLINE INSTITUTE OF
HOTEL MANAGEMENT STUDIES
Pondicherry - 605011
for
SCHOOL OF DISTANCE EDUCATION
Bharathiar University
Coimbatore - 641046
CONTENTS
Page Nos.
UNIT - I
Lesson 1 Planning Management 3 - 12
Lesson 2 Equipment Requirements 13 - 28

Lesson 3 Construction Works Planning 29 - 32
Lesson 4 Planning Team 33 - 40
UNIT - II
Lesson 5 Planning Process 43 - 50
Lesson 6 Plans and Specifications 51 - 56
Lesson 7 Preparation of Prospectus 57 - 68

Lesson 8 Feasibility Study 69 - 76
UNIT - III
Lesson 9 Functional Planning 79 - 88
Lesson 10 Planning the Atmosphere 89 - 100
UNIT - IV
Lesson 11 Work Place Design 103 - 114
Lesson 12 Preparation Equipments 115 - 122
UNIT - IV
Lesson 13 Space Requirements 125 - 132
Lesson 14 Space Arrangement 133 - 148
SYLLABUS
Year Paper Subject and Paper Theory

III X FOOD SERVICE FACILITIES PLANNING 100
Unit – I
Food service facilities planning: Introduction, Design & layout.
Planning: Characteristics, Scope, Objectives, Facilitating production, materials
handling, space utilization, maintenance & cleaning, Cost control, investment in
equipment, labour utilization, Supervision, flexibility.
Unit – II
The planning process: Preliminary planning information, prospectus, commissioning
planners, developing the concept, equipment requirements, space requirements,
developing preliminary plans preparation of final plans, preparing specifications,
binding & awarding contracts, constructions.
Preparing of prospectus: Importance, customer & user characteristics, developing the
feasibility study: importance of market survey, site analysis, cost estimates.
Unit – III
Functional planning : Functions, concept of flow, functional requirements, receiving
storage, preparation, cooking, baking, Serving, dish washing, Pot & pan washing,
Waste disposal, other requirements.
Planning the atmosphere: Atmosphere & mood, colour, lighting, acoustics, noise &
music, climate control, furnishings, exterior design, advertising & public relations.
Unit – IV
Work place design: Developing work place, work place environment, concepts of
motion economy, materials handling, designing safe work place,
Equipments requirements: Methods, equipments check list, broilers, griddles, ovens,
ranges, steam jacketed kettles, steamers, ware washing equipment, waste disposal
equipment selection.
Unit – V
Space requirements: Introduction – space estimates, total facility size, dining areas,
production areas, space calculations, receiving area, Storage areas, Serving areas,
dining areas.
Layout facilities: Space arrangements, flow, other criteria for lay out, layout
configurations, relationship charts for lay out, lay out guides, layout of storage areas,
Layout of main cooking areas, Layout of dish washing areas.
MODEL QUESTION PAPER
Bharathiar University, Coimbatore.
Course : B.Sc. (Catering Science & Hotel Management)

Subject : Food Service Facilities Planning
Time : 3 hours
Total Marks : 5 x 20 = 100
Direction : Answer any five questions only
1. i) What is the function of the designs?

ii) Write brief notes on planning process.
iii) What are the characteristics of the planning?
iv) Define cost control.
2. i) Write in details about Equipment requirements.

ii) What are the points to be considered in deciding the make and model of
equipment?
iii) List out the various equipment and explain it.
iv) Give a brief about Space requirements.
3. i) Write short notes on land developers and realtors.

ii) List out the responsibilities of food service consultant.
iii) Explain the role of Architect.
iv) Write the significance of Interior designer.
4. i) What is the type of food service facility?

ii) List out the Equipment requirements.
5. i) What are the regulatory considerations?

ii) What are the operational characteristics are determined?
iii) What are the factors that are considered in selecting a particular food item?
v) List out the categories of frequency of change for the menus.
6. i) What are the points to be considered on Site Analysis?

ii) Explain about the Feasibility Study.
iii) Define Cost Estimates.
iv) What is Operating Capital?
7. i) Write the uses of ranges in kitchen.

ii) What is the role of steamers? Explain in detail.
iii) Briefly explain about dishwashing equipment.
iv) What are the points to be considered in deciding the make and model of
equipment to specify?
8. i) Develop a relationship chart for a fast food operation of your choice. Identify
the functional areas and give the closeness ratings.
ii) Evaluate the layout using the relationship concept. How would the layout
rate in terms of the closeness analysis?
UNIT I
UNIT II
UNIT III
UNIT IV
UNIT V
LESSON 1
PLANNING MANAGEMENT
CONTENTS
1.0 Aims and Objectives
1.1 Introduction
1.2 Design and Layout
1.3 Planning Process
1.4 Planning
1.5 Scope
1.6 Facilitating Production
1.7 Materials Handling
1.8 Space Utilization
1.9 Maintenance and Cleaning
1.10 Cost Control
1.11 Investment Equipment
1.12 Labour Utilization
1.13 Supervision
1.14 Flexibility
1.15 Developing the Concept
1.16 Let Us Sum Up
1.17 Lesson End Activity
1.18 Key Words
1.19 Suggested Questions
1.20 References
1.0 AIMS AND OBJECTIVES
At the end of this lesson, students should be able to

demonstrate appropriate skills, and show an understanding of the
following:
 Planning Process
 Facilitating Production
 Maintenance and Cleaning
 Cost Control and
 Labour Utilization.
1.1 INTRODUCTION
The food service industry has experienced tremendous

growth change in the last few years, which have created a need for
foodservice facilities capable of providing the variety of meals
prepared by different preparation techniques that will satisfy the
changing desires of customers.
Foodservice facilities vary from the simplest limited menu

snack bar to the multifaceted hotel foodservice that may involve
Food Service public dinning rooms, employee dining rooms, cafeterias, banquet
Facilities Planning service, and room service. Each type of foodservice facility is
characterized by unique traits in the meals offered, type of service,
operational methods, marketing approach, customers served, and
atmosphere or ambience.
Each foodservice facility may be planned to meet different

objectives. For example, the objective for a fast facility may stress
the speed of service, whereas the hospital foodservice has to stress
the nutritional and therapeutic values of food. These variations
indicate the complexity of loaning foodservice facilities. However,
there is one characteristic common to all food service facilities. Each
is involved in the production and sale or distribution of meals. This
common characteristic requires that foodservice facilities be planned
for technologically modern production techniques and operated by
modern management concepts.
1.2 DESIGN AND LAYOUT
The term “design and layout” are sometimes confused and

should be clarified to simply further discussion. Design refers to the
broad function of developing the entire foodservice facility, including
the original concepts of operation, site selection, menu development,
equipment requirements, and all the other pertinent planning
functions that are necessary to develop the concept into a structural
and operational reality.
Layout is a more limited function of the planning process that

deals with the arrangement of the physical facilities for the food-
service operation. Layout is one of the many tasks that have to be
accomplished in the overall design of the facility. It is one of the most
important aspects of design because it dictates to a great extent the
operational efficiency of the facility.
The entire design of a foodservice facility includes many

functions that the related to the layout function, as well as being
related to each other. Some of these design functions can be
identified as;
 Conceptualization of the proposed project.
 Market studies of a particular or perhaps funding a
suitable location.
 Financial planning.
 Location and site considerations.
 Determining the overall size of the facility.
 Feasibility studies.
 Menu development.
 Merchandising.
 Service Considerations.
 Development of the during atmosphere.
 Organization.
4  Pricing considerations
 Food preparation and production techniques. Planning
Management
 Selection of materials and methods of
construction
 Layout of equipment, workplaces and aisles.
The order of the functions is not intended to signify the

sequence in which they are performed or their importance. For
certain projects, some of these functions are very important to the
successful planning of the facility; yet these functions may not be so
significant in other types of projects. For example, the layout function
for a drive-in chain that uses basically the same arrangements of
equipment and spaces becomes a minor part of design after the first
one is planed. In this case, location and site analysis or
merchandising may be the more important design functions for the
chain. On the other hand, the layout function for an institutional
foodservice facility is very important because of its bearing on
construction and operational costs. Food facility planners must
sense the importance of the various design functions for each type of
project and concentrate their efforts on the most relevant ones.
The design function identified emphasizes the importance of

correlating the design and layout of the physical facilities with the
operational characteristics of the foodservice facility. It is common to
discuss and evaluate such areas as marketing, menus, labor
availability, atmosphere, sales, and many others during the planning
process.
The design and layout of the workplaces, department’s

storage areas, aisles, and other facilities should reflect the
operational characteristics of the organization. Similarly, the existing
facilities dictate to a great extent the operational characteristics of
the foodservice enterprise. It is difficult to separate the concepts of
design and layout of physical areas and facilities from the basic
concepts of good operational procedures and policies. For example,
one planning concept is to simplify the production of food items
appearing on and training programs for employees. Another concept
is to create a physical atmosphere that will attract and retain
customers. The same concept is used to develop the merchandising
aspects of the operation for purpose of generating sales. Thus it is
easily seen that both planning and managing of a particular
foodservice facility are guided by many identical concepts.
In reality, it would be impossible to plan a well-designed

facility without a fundamental understanding of basic operational and
management principles as they relate to foodservice operations.
Since there is such a close relationship between the physical
facilities and the operation of the foodservice, it is desirable for
management personnel to understand the principles of planning, so
that the functioning of the operation can be directed as conceived by
the designer. Good management is obviously the key to the
successful operation of a foodservice facility regardless of the
physical facilities, since good management can overcome poor
design and layout to a certain extent. However, a well-planned 5
Food Service facility not only simplifies the management of the operation but
Facilities Planning largely determines the success of the project.
1.3 PLANNING PROCESS
The planning of a complete foodservice facility requires the

expertise of many individuals working cooperatively together and
assimilate the information necessitated by the complexity of the
project. It would to impossible to list chronologically all the detailed
steps or phases included in the planning process, because many
different approaches may be used. There are indeed, certain steps
that must be completed before further planning can proceed;
however, some phases of planning can be accomplished
simultaneously or in a few cases independently, depending upon the
situation. Actually the planning process can have many starting
points, or the various phases involved may be done in a different
order.
The planning process usually begins when there is a ideal

generated, a desire to be fulfilled, or a pressing need for a
foodservice facility. The project may originate in a market survey that
indicated the need for a new restaurant in an area; or a land
developer may have a particular location that may be suitable for
foodservice operation. Some planning projects are created by
necessity because they are an integral part of a larger project where
food services are desire. Examples include the building of new
hospitals, schools, nursing homes, and office facilities. Other
projects may be created because they are solutions to problems of
high labor costs, lack of sales volume, or obsolescence in existing
operations.
The various steps of the planning process will be outlined in

this chapter, and detailed discussions of the more important steps
will be presented in later chapters.
1.4 PLANNING
The planning of food service facilities is characterized by

some design and layout problems that are not commonly
encountered in other types of planning projects. One specific
problem that the food facility planner faces is the customer or user
demand for food service at limited periods of time which results in
peak periods of actives in the facility.
A well planned facility developed by utilizing the basic

principles from many areas of knowledge. The concepts of work
analysis, time and motion studies, human engineering, management,
economics, psychology, materials handling and many fields.
The characteristics of a well planned food service facility are:-
 Minimum investment in buildings, furnishings and

6 equipment.
 Aesthetic appeal to customers and workers. Planning
Management
 Maximum profit and return on investment.
 Simplified production process for food and non food
items.
 Efficient flow of materials and equipments.
 Minimum employee travel.
 Safe working areas
 Minimum waste of time, Labour and materials
 Sanitary conditions in all areas.
 Minimum manpower requirements.
 Low maintenance costs.
 Ease of supervision and management.
1.5 SCOPE
Planning deals with development of spaces, equipment and

work areas. Planning of new facility consider of local site selection.
New facility makes planner to the greatest use of new food product,
processing techniques, new equipment, new concepts, great
freedom to design the operating characterizes and management
policies. Sometime remodeling projects involve major structural
changes. When structural changes are involved it is desirable to
anticipate any future changes. Other types of planning include the
expansion of an existing production area. The new projects add new
areas to the department. The new area will be able to handle new
menu items in new production process. Sometime additions are
needed to provide a different type of service like carryout or catering
service.
1.6 FACILITATING PRODUCTION
The objectives for all types of planning are common in

facilitating the food production function. The planner uses this
objective to guide the arrangement and layout of spaces,
workplaces, equipment and aisles to smooth flow of materials and
employees. Management uses the same procedure to direct the
employees in correct work procedures.
1.7 MATERIALS HANDLING
Another objective is to design so that it will minimize the

materials handling required. The planner utilizes all the principles of
materials handling. The planner first visualizes the flow of materials
and then makes and alternate arrangement for it. The materials not
only include food items also dishes, pots and pans, beverages,
bottles, silverware, trash, paper and linen as well. Don’t handle the
materials by hand if they can be handled or moved by some other
method like maximum use of carts, conveyors and other mechanical
aids. If materials has to move in straight with back tracking. The food
facility planner use many aids such as products process charts, flow
7
Food Service diagrams or string charts to evaluate and plan for the efficient flow of
Facilities Planning materials.
Some basic objectives that guide the design of a materials

handling are:
 Minimize the cost of handling materials.

 Minimize the time required to handle materials.
 Minimize the inventory of materials required to meet
the need of the operation
 Safeguard the materials from deterioration and
damage
 Simplify the control of materials used in the facility.
1.8 SPACE UTILIZATION
The increasing in the cost of building materials, equipment,

labour and construction the planner must utilize the objectives of
making economical use of space. The objective refers to both
horizontal and vertical spaces and accomplished by space standard
for workplaces, aisles, storage areas, ceiling heights and shelving.
Different arrangement of equipments storage areas and aisle space
should be evaluated to make maximum use of space is achieved.
The objective is to allow only the space needed to accomplish. The
space requirements for a facility can be frequently are reduced by
changing purchasing frequencies, type of raw materials or
production process.
1.9 MAINTENANCE AND CLEANING
The provision for maintenance and cleaning case in the food

service facility is another objective of sound planning. The designer
considers this objective when specifying. Materials for walls, floors
and ceilings and in the construction methods to be used. The design
of equipment is also important in this objective. Providing adequate
space for maintaining and cleaning food service equipment is also
important.
1.10 COST CONTROL
A food service facility designed with cost control as a basic

objective will result in a more profitable operation. In the same
objective the management will also operate. Food and beverage cost
control is one area where the designer can incorporate many ideas
that will keep costs to minimum. The incoming merchandise can be
checked for weight, count and quality is very important to this
objective. Storage areas can be designed to simplify inventorying
and keeping track of expensive of portion control is reflected by the
selection of materials, equipment, utensils and cooking processes
that will be used. The availability of proportioned foods has done a
great deal towards simplifying the design for portion control,
8
especially for fast food operations.
1.11 INVESTMENT EQUIPMENT Planning
Management
The maximum use of materials handling equipment satisfies
the objectives of minimizing the handling of materials; the planner
should consider other basic objective of planning that the investment
in equipment should be minimized. The planner has to decide the
certain types of materials handling equipment. The basic objective is
related to all types of equipment to be used in the facility.
Considerations of cost, type, size and maintenance problems
associated with equipment are all evaluated before the decision is
made.
1.12 LABOUR UTILIZATION
A very important objective of planning is to develop a design

that will promote the effective use of labour and it is accomplished by
the design of individual workplaces and work areas. Considerations
of employee safety, comfort and working conditions are also
evaluated and provided at the same time.
1.13 SUPERVISION
Areas related to Labour aspect are consideration of

supervision and development of employees. Anticipated methods of
training, control and evaluation of performance, number of
employees may need special areas for meeting sessions and
training programs.
1.14 FLEXIBILITY
Another objective that guides the planning of facilities is the

concept that provides for flexibility and adjustments can be easily
changed, moved or adjusted to make them more effective for the
accomplishment of required tasks. Generally these changes the
materials and produces used or in the production techniques
necessary to process the materials. The use of partially or fully
preprocessed foods is the type of change that can be envisioned and
appropriate provisions can be included in the final design of the
facility. Many facilities are planned with expansion in mind and space
for additional equipment can be provided.
1.15 DEVELOPING THE CONCEPT
This phase of the planning process involves identifying or

visualizing the various functions and tasks that must be performed to
meet the objectives of the foodservice facility. It is necessary, not
only to develop detailed space and equipment requirements, but also
to aid in the final arrangement and layout of the facility. Identification
of the functions also simplifies the gathering of the data required for
proper planning of the entire foodservice facility. The functions are
determined by using the prospectus, especially the proposed menu
as a guide. Examples of common functions identified for food
facilities are purchasing, receiving, storage, preparation, processing 9
Food Service and serving. These are purchasing, receiving, storage, preparation,
Facilities Planning processing, and serving. These functions are related to the
production of menu items and are easily identified. Auxiliary or
supportive functions, such as ware washing, trash and garbage
disposal, maintenance, and sanitation, should also be identified.
Management functions of control, planning, supervision, and
evaluation to name a few, are to be included as well.
Requirements for both guest and employee convenience are

also identified as necessary auxiliary functions; parking areas,
waiting areas, washrooms, locker facilities, office space, and training
facilities are examples of these.
A related step in this aspect of the planning process may be

described a task analysis. For each function identified, there are
certain basic tasks to be performed. An evaluation of these tasks
generates the data needed to determine space and equipment
requirements. To illustrate, consider the receiving function. The basic
tasks involved include counting, weighing, determining quality,
moving materials, and checking orders. These may be accomplished
in different ways depending upon management policy and
operational procedures. The method of performing each task is
evaluated by considering the materials involved, type of equipment
that may be used, and the skills required by the employees. This
may require considerable date gathering and research before
deciding on the method of performing the takes. The data are
obtained and summarized so the planners can make appropriate
decisions regarding the design of work area to be developed.
CHECK YOUR PROGRESS
1. The term ‘design’ refers to ……………………….

2. ‘Layout’ is a more limited function of …………… that deals with
the arrangement of …………. for the food-service operation.
3. What are the characteristics of a well planned food service
facility?
1.16 LET US SUM UP
Foodservice facilities vary from the simplest limited menu

snack bar to the multifaceted hotel foodservice that may involve
public dinning rooms, employee dining rooms, cafeterias, banquet
service, and room service.
Each foodservice facility may be planned to meet different

objectives. For example, the objective for a fast facility may stress
the speed of service, whereas the hospital foodservice has to stress
the nutritional and therapeutic values of food.
The planning of a complete foodservice facility requires the

10 expertise of many individuals working cooperatively together and
assimilate the information necessitated by the complexity of the Planning
project. Management
The planning process usually begins when there is a ideal

generated, a desire to be fulfilled, or a pressing need for a
foodservice facility.
The planning of food service facilities is characterized by

some design and layout problems that are not commonly
encountered in other types of planning projects. One specific
problem that the food facility planner faces is the customer or user
demand for food service at limited periods of time which results in
peak periods of actives in the facility.
A related step in this aspect of the planning process may be

described a task analysis. For each function identified, there are
certain basic tasks to be performed. An evaluation of these tasks
generates the data needed to determine space and equipment
requirements. To illustrate, consider the receiving function.
1.17 LESSON END ACTIVITY
1. Draw the layout for food service facility.

2. Identify future development of the planning process.
1.18 KEY WORDS
Multifaceted hotel having many facets or aspects

Therapeutic Having or exhibiting healing powders.
Merchandising promotion of sales
Chronology arrangement of events in their time order of
occurrence
Feasibility study it is a process which dryings exactly what a
project is and what strategic issues need to be
considered to assess its feasibility.
1.19 QUESTIONS FOR DISCUSSION
1. What is the function of the designs?

2. Write brief notes on planning process.
3. What are the characteristics of the planning?
4. Enumerate the difference between Space utilization and labour

utilization.
5. Define cost control.
11
Food Service CHECK YOUR PROGRESS - ANSWER
Facilities Planning
1. broad function of developing the entire foodservice facility.
2. planning process, physical facilities
3. ● Minimum investment in buildings, furnishings and equipment

● Aesthetic appeal to customers and workers
● Maximum profit and return on investment
1.20 REFERENCES
1. Bernard Davis, Andrew Lockwood, Sally stone (2006), Food and

Beverage Management, Elsevier - A Division of Reed Elsevier
India Private Limited.
12
LESSON 2
EQUIPMENT REQUIREMENTS
CONTENTS

2.1 Introduction
2.2 Equipment Requirements
2.3 Method of Determining Equipment
2.4 Various Equipments
2.4.1 Broilers
2.4.1.1 Overhead Broilers
2.4.1.2 Under Fired Char Broilers
2.4.2 Deep Fryers
2.4.3 Tilting Fry Pan
2.4.4 Griddles
2.4.5 Ovens
2.5 Equipment Selection
2.6 Space Requirements
2.6.1 Space Estimates
2.6.2 Total Facility Size
2.6.3 Dining Areas
2.6.4 Dining Areas Space Requirement
2.6.5 Types of Seating to be Provided
2.6.6 Number of Service Stations Needed
2.6.7 Production Areas
2.6.8 Space Calculations
2.6.9 Receiving Area
2.6.10 Storage Areas
2.6.11 Serving Areas
2.7 Let Us Sum Up
2.9 Key Words
2.10 Questions for Discussion
2.11 References

following:
 Equipment Requirement
 Various equipments
 Equipment selection
 Space requirements and
 Space calculations.
Food Service 2.1 INTRODUCTION
Facilities Planning
The planning of foodservice facilities is usually a continuous
process for those individuals and organizations engaged in the food-
service industry. The planning involved may be quite simple, as in
the case of rearranging tables and chairs in an existing dining room
or replacing in production areas. In other cases, the planning may be
a very complex problem such as the development of a completely
new foodservice facility, which involves considerations of land,
building design, financing, management policies, and operating
procedures. Regardless of the complexity of the project, satisfactory
results can be obtained only when the planning is guided by the
basic concepts and objectives of design and layout.
2.2 EQUIPMENT REQUIREMENTS
Equipment requirements are best determined from a

complete analysis of typical menus. For each food item on the menu,
information regarding anticipated number of portions to be prepared,
portion sizes, batch sizes, main ingredients, and the processes to be
performed are indicated. Much of this information can be taken
directly from the recipes for each of the menu items. If recipes are
not available, the foodservice consultant will rely on knowledge of
production practices to generate the information.
From the production processes identified, the planner can

then decide whether equipment is to be used to complete a
particular process or whether it can be done manually. If equipment
is to be used, the planner will then evaluate the type and capacity
required. At the same time the various types of equipment are
selected and the total time that the equipment will be used for each
process is recorded. The specific time of the day that each piece of
equipment is to be used is also recorded. After this is done for each
process, the equipment usage is evaluated and final equipment
capacity is determined.
At this point in the planning process, it can be found desirable

to add, delete, or change some of the menu items or processing
methods in order to achieve greater equipment utilization. For
example, if a steam-jacketed kettle is required to process two menu
items but is operated for a short period of time, additional menu
items may be suggested to utilize the equipment more fully. Another
solution would be to change or eliminate the two menu items, thus
eliminating the need for the steam-jacketed kettle. In this manner the
food service planner can maximize the usage of the equipment.
2.3 METHOD OF DETERMINING EQUIPMENT
Methods determining the specific equipment requirement for

the proposed foodservice facility is one aspect of design on which
considerable time can be spent. During this part of the planning
process, the foodservice consultant has to estimate accurately the
capacity of each of the various types of foodservice equipment to be
14 used. If these capacity estimates are too low, the result will be
delayed and bottlenecks in the production process. Estimates that Equipment
are too high will result in an expensive and inefficient piece of Requirements
equipment. The foodservice consultant must be careful to take into
account any projected increases in business volume that require
increased equipment capacity, and plan accordingly. Additional
decisions regarding the equipment that may be made at this time
include the manufacturer, the model number or designation,
attachments, and other special accessories needed to process the
food items.
A systematic method of determining equipment capacity

required is to analyze each food item appearing on the menu. If
daily-change menus are used, a sampling of typical menus may be
sufficient. The first bit of information needed is an estimate of the
number of portions that have to be prepared for a particular meal
period. This estimate is made for every menu item requiring
equipment, including appetizers, entrees, desserts, breads, salads,
and beverages. Next, the portion size of each of the menu items is
identified. Multiplying the estimated number of portions by the portion
size will give the total volume of food to be prepared.
The capacity of equipment should be determined with future

changes anticipated. Trend can be studied, and then any anticipated
changes in foods, sales volume, or meals offered can be projected to
see if drastic changes in equipment will be necessary. For example,
perhaps no freezer space will currently be required, but if the need
for freezer space is highly probable in 5 or 10 years, space can be
left to add it conveniently and economically.
The method of preparation in production for each item is then

evaluated. Possible alternatives may include items individually
prepared to order; items prepared in small batches in anticipation of
orders; items prepared in large batches; and items that are partially
batch-prepared and finished when orders are received. The batch
size is next determined for those items that are to be prepared in
batches. The selection of batch size is one way that the foodservice
consultant can control the capacity of the equipment. Smaller and
more frequently prepared batches are desirable because they
require less equipment capacity and the foods are fresher when
served. Some items that can be held well after cooking can be made
in larger batches.
For those items to be prepared and cooked to order the

maximum number of portions to be made at one time is estimated on
the basis of the number of customers, their menu preferences, and
their arrival patterns. Some projects may require estimates of
portions to be prepared per time unit. For example, the number of
hamburgers per hour would be estimated for high-volume operations
that utilize continuous processing instead of batch processing.
The capacity of some types of equipment is designed by the

number of pans they can hold. In those cases, the designer will have
to convert the total number of portions into number of certain-size
pans. Ovens may be selected by the number of 18 by 26 in. (457 by 15
660 mm) bake pans they can hold. There are other methods of
Food Service designating capacity for certain types of equipment, and the
Facilities Planning foodservice consultant has to convert the portion calculations
accordingly. After determining portions, equipment catalogs may be
consulted to match the capacity needed for production with the
available sizes of standard equipment. The designer is also careful
when sizing some equipment that may have a usable capacity that is
somewhat less than the stated capacity. Appropriate adjustments
are made in the computations to allow for this discrepancy.
Other data required include the total processing time needed

for each menu item for a particular piece of equipment and the time
of day that the processing can be done. This information is useful in
anticipation of possibly scheduling those items that require that same
type of equipment through one piece of equipment instead of two or
more. Duplication of equipment is avoided unless there is a need for
it, such as having separate deep fryers for fish and chicken, or
having one slice in the preparation area and one in the cooking area
if the volume of work to be done in each area warrants it.
2.4 VARIOUS EQUIPMENTS
2.4.1 Broilers
Broilers are classified as equipment that utilizes intense

radiant heat for rapid cooking of foods. The two common types are
the over-head broiler and the under fired broiler. Other types of
speciality broilers and combinations are also available. Broilers are
available in either gas or electric models.
2.4.1.1 Overhead Broilers
Heavy-duty broilers have a large area and are equipped with

large burners for fast broiling. They ma be used individually or
incorporated into a heavy-duty range section. Three common
methods of incorporating the broiler into the range section are:
i) Having the broiler at the same height as the range

tops.
ii) Having the broiler as an integral unit with an overhead
oven that is heated by the burners in the broiling
compartment.
iii) Having the broiler mounted on a conventional range-
type oven with or without an overhead oven.
A small broiler referred to as a salamander can be mounted

above the top of a heavy-duty range or above a spreader plate as
part of a back-shelf assembly. The broiling capacity of the
salamander is not as great as that of the regular overhead broiler. It
is primarily used for small operations with light broiling loads or as an
auxiliary broiler during off-peak hours in larger operations when the
main broiler is not in use.
16 Modern overhead broilers usually will head to broiling

temperatures in a short time and have pullout grids for easy loading
and unloading. Adequate venting of broilers is required to remove Equipment
smoke and odors. Requirements
2.4.1.2 Under Fired Char Broilers
Char broilers use pieces of ceramic or other refractory

materials to form a radiant bed above the burners. The food items
are placed on a grate located directly above the radiant bed. While
cooking, the juices from foods drip directly on the hot bed and burn,
which gives the typical charcoal flavor and appearance. Since a
great deal of smoke is given off by char broilers, they must be used
under an efficient exhaust wood. Char broilers are available in
multiple sections that increase the grid area for high-capacity
broiling.
Cooking items vary with many factors, including initial

temperature of the food and closeness to the heat source.
Consequently these times should be used only for estimating
equipment capacity.
To determine the broiler capacity required for a particular

menu item, the designer will estimate the total number of portions
that would have to be placed on the broiler grid at one time. Knowing
the approximate area per portion, the total area required can be
computed. If more than one type of food item is to be processed,
then each type is checked to see which item will generate the
greatest demand on the broiler. If the production estimates are in
terms of portions per hour, the average cooking time is considered
and the capacity of the broiler is based on this factor.
2.4.2 Deep Fryers
Deep fat fryers are available in a variety of types, capacities,

and degree of automatic operation desired. Computer monitoring
and control are available for the optimal frying of foods. The
productive capacity of a fryer is related to the pounds of fat in the fry
kettle, the heat input, and the cooking time required for various
foods. Typical designs of fryers are based on a fat-to-fat ratio of 6 to
1. This indicates that each pound of food to be fried requires 61b
(2.7 kg) of fat capacity designations for conventional fryers from 15
to 130 Ib. (6.8 to 59 kg). Conventional fryers may be free-standing or
can be built-in. Counter models are available for small requirements.
2.4.3 Tilting Fry Pan
The tilting fry pan is one of the most versatile piece of

cooking equipment. Its design is such that it can be used to boil,
simmer, braise, grill, sauté, fry, and even steam a variety of foods.
For some items such as stews all the preparation steps can be done
in the tilting fry pan with some savings in time that would normally be
spent transferring foods and cleaning other utensils and equipment.
Tilting fry pans may be free-standing; wall mounted, or

counter mounted and is, available in either gas or electric models. 17
The fry pan is tilted by a worm and gear assembly operated by a
Food Service hand wheel. Typical capacities range from approximately 10 qt (9.46
Facilities Planning litre) for the table top models to 40 gal (403 liter) for the floor models.
2.4.4 Griddles
Griddles are flat-top pieces of equipment heated from

beneath, as compared to grills which have heating sources both
above and beneath. Griddles are used for high-production
foodservice and fast-food operations. Grills are more of a specialty
piece of equipment. Griddles are available in a variety of sizes from
as small as 7in. (178mm) wide and 14 in. (356 mm) deep to as large
as 72 in (1829 mm wide and 24 in. (610 mm) deep. Both gas-fired
and electric models are suitable for most purposes. Griddle capacity
is designated by the physical dimensions of the cooking surface.
Griddle capacity required is determined by the same method
suggested for broilers. Manufacturers will frequently have production
capacity stated in terms of certain food items.
Griddles can be free-standing, counter-mounted, mobile or

built-in as the situation demands. Thermostatic controls, which
maintain constant surface temperatures, are necessary for proper
operation of the griddle. The height of splashguards and the location
and width of grease troughs should be considered when specifying
griddles.
2.4.5 Ovens
Ovens are available in a great variety of types, sizes and

methods of operation. Different types may be used to bake, roast,
oven-broils, oven-fry, cook casseroles and reconstitute frozen foods.
The capacities of ovens are stated in terms of the cooking chamber
dimensions or by the number of bake or roast pans that can be
placed in the oven at one time. Some operations may require more
than one to handle the different temperature and time requirements
of their menu items. The following table depicts the approximate
cooking times for griddling.
Food item Cooking time (Min)

Bacon 5-6
Beef tenderloin 6-8
Belogna 2-3
Grilled cheese 1-2
Eggs 2-3
Fried Potatoes 3-4
Hamburgers 2-5
Ham Loaf 2-3
Ham Steak 8-10
Minute steak 3-5
Pancakes 2-3
Sausage 3-5
18
The following table details the approximate roasting times for Equipment
meats. Requirements
Approximate cooking time

Meat
per lb (min)
Beef 15-20
Rare 20-30
Medium 24-40
Well-done 28-50
Veal 25-35
Lamb 30-35
Pork fresh 30-50
Ham Uncooked 20-25
Ham Cooked 15-18
2.5 EQUIPMENT SELECTION
Selecting a particular make and model of any type of

equipment is the final step in determining equipment requirements.
Foodservice consultants will prepare a “schedule of equipment” that
will list the specific equipment to be used for the facility. The
following points are considered in deciding the make and model of
equipment to specify.
 Simplicity of operation
 Sanitary design
 Modular sizes to fit standard-sized pans
 Cost of installation
 Cost of operation
 Ease of repair and maintenance
 Durability
 Compatibility with other equipment.
The design of the equipment should be simple, functional,

and attractive. Maximum utility at a reasonable cost is to be sought
for all types of equipment.
2.6 SPACE REQUIREMENTS
Another phase of the planning process deals with the

determination of space requirements. This aspect is related to
equipment selection because of the space needed for placement of
equipment. Space requirements are also dependent upon the
functions and tasks that have to be performed in the facility. The
space required is best determined by considering all the factors
facility. The space required is best determined by considering all the
factors involved, including the floor space needed for the employee;
working surface space for manual tasks; aisle space for movement;
equipment space; provisions for storage of hand tools and supplies; 19
Food Service and provision for storage of incoming and outgoing materials. This
Facilities Planning aspect of the planning process may e though of as the development
of workplaces or work areas for each task. As these workplaces are
developed, the estimation of time requirements for each task may
enable the designer to schedule several tasks to be performed at a
given workplace. There are certain workplaces that can be used for
only on task because of sanitary or other reasons.
As these individual workplaces are developed, consideration

is given to the overall operation of the facility, so the grouping of
individual workplaces into large work areas or departments results in
a feasible solution. Thus the planner is designing the individual
workplaces and the total space for the facility simultaneously. This
part of the planning process is completed when the space required
for all the functions and tasks has been determined.
The objectives for all types of planning are common in

facilitating the food production function. The planner uses this
objective to guide the arrangement and layout of spaces,
workplaces, equipment and aisles to smooth flow of materials and
employees. Management uses the same procedure to direct the
employees in correct work procedures.
2.6.1 Space Estimates
The general guides and “rules of thumb” that will be given are
to be used for preliminary space estimates only. They are to be
regarded as strictly tentative and subject to easy change. The “rules
of thumb” are used to get a general idea of the overall size of a
facility in order to make preliminary cost estimates for feasibility
studies or to determine approximate land requirements for the
building. One problem with using guides and “Rules of thumb” is that
the figures given are usually based on existing operations and do not
reflect newer methods of foodservice operation. Another difficulty is
that these figures are not given for all types of foodservice
operations and consequently they would be of little use for certain
types of projects. Most of the figures available are for general
facilities that have no unusual space requirements.
2.6.2 Total Facility Size
Depending upon the type of foodservice to be planned, a

general estimate of the total building size can be obtained by relating
it to the number of seats to be provided. A range of space estimates
is given to allow for variations in the methods of operation. The
smaller figures are used for limited menu and limited-space
operations; the larger figures are suitable for operations with
extensive menus and allow more spacious areas.
Figures for estimating the total facility size of other types of

food-service, such as tray service, car service, or take-out service,
are not available because of the great variations that exist in these
types of operations. The only guides available would be to evaluate
20
similar existing operations and make adjustments as needed.
2.6.3 Dining Areas Equipment
Requirements
Estimating the space required for dining areas is based on
the number of persons to be seated at one time and the square feet
of space allowed per seat. The number of persons to be seated at
one time is determined by considering the total number of customers
to be served for a given time period, and the turnover. Turnover
refers to seat usage and is expressed by the number of times a seat
will be occupied over a given time period. Turnover is usually
expressed on a per-hour basis, although it can determine on a per
meal basis. The table below shows the estimated total facility space
for foodservice facilities.
Area per sat

Types of operation 2
(ft ) (m2)
Table Service 24-32 2.23-2.97
Counter Service 18-24 1.67-2.23
Booth Service 20-28 1.86-2.60
Cafeteria Service 22-30 2.04-2.79
The turnover is determined by estimating the average time

and the seat is occupied for the time period desired. For example, if
the turnover is to be expressed on a per-hour basis and the average
estimated time the seat occupied is 20 minutes, the turnover is 3. If
the average seat occupancy time is 30 min, the turnover rate is 2 per
hour. Determining the turnover rate per meal period is useful for
determining the total seating capacity based on estimated sales
volume.
Turnover rates are affected by the method of serving and

serving time as well as by the type of customer, menu offerings and
the dining atmosphere. Typical turnover rates for some types of
foodservice operations are shown in the following table.
Types of Operation Turnover rate

Commercial cafeteria 1½ - 2½
Industrial of School cafeterias 2-3
Counter Service 2 - 3½
Combination counter and table service 2-3
Leisurely table service ½-1
Regular Table Service 1 - 2½
Turnover rates can be increased to some extent by many

design and operational factors. This is not to suggest that all facilities
should be designed for high turnover rates. However, if high turnover
is one of the basic objectives, then the planner and subsequent
manager can use the following to accomplish this:
21
Food Service  Use menu items that require short processing times,
Facilities Planning or use predominately preprocessed items.
 Provide ample production space and equipment to
handle the peak periods.
 Use well-lighted and light-colored painted areas for
serving and dining.
 Arrange dining tables in close proximity to each other.
 Develop a somewhat uncomfortable dining seat
design.
 Provide for prompt clearing of the tables when a
customer is finished with a course or the entire meal.
 Make sure guest checks are presented to customers
as soon as they are finished eating.
Note that a number of factors identified above are

characteristic of the management policy after the facility has been
built. This again emphasizes the close working relationship that has
to exist between the owner or manager and the planner during the
planning process. A foodservice facility designed for high turnover
must also be managed for high turnover if the anticipated volume of
sales to be generated.
The square feet of space allowed in the dining area is

governed by the amount of comfort desired. Crowding in dining
areas is not desirable except in some quick-service fast-food
operations. Most individuals would like to have sufficient elbowroom
and table space to enjoy their meal. Suggested space requirements
for dining areas for foodservice facilities.
Type of Facility Dining Space (M2) Per seat (ft2)

Table service 12-18 1.11-1.67
Banquet 10-12 0.93-1.11
The figures on the high end of the range are used where
ample apace or leisurely dining is to be provided. The figures on the
low end of the range will result in minimum space requirements. The
estimates for dining areas include space for tables, chairs, aisles,
and service stations. They do not allow for waiting areas, rest rooms,
or other similar areas. Space requirements for these areas have to
be determined separately. The size and arrangement of tables,
chairs, booths, and counters selected for the dining area are
important to the efficient use of the space allowed.
22
2.6.4 Dining Areas Space Requirement Equipment
Requirements
Calculating the space requirement for dining areas can be
difficult because of the many choice available. For example, the final
space required for a dining room is dependent upon the following
variables:
2.6.5 Types of Seating to be Provided
 Tables and chairs

 Booths
 Counters
 Combinations
 Table sizes desired
 Pattern of table arrangements
 Aisle space desired
2.6.6 Number of Service Stations Needed
A suggested approach that allows a planner to evaluate

these variables and their effect on the dining space per seat is the
modular concept. For this situation the module contains space for
the table, the seats, and the appropriate share of the service and
access aisles. The modular concept enables designers first to
evaluate the pace requirements for different choices that may be
made before reaching their final decisions.
Having selected the table size and shape and the desired
aisle space, the next step is to consider possible table arrangement
patterns. Square or round tables may be arranged into rectangular or
diagonal patterns. The diagonal pattern is more efficient in the use of
space than the rectangular pattern.
The module size is 9 ft (2.74 m), by 9 ft (2.74m), which

results in a total area of 81ft2 (7.52 m2). Considering that the module
if or four persons, the space per seat for this module is 20.25 (ft2)
(1.88 m2)/seat. If this module were to be used for a dining room with
100 seats, the total area required would be 2005 ft2 (188 m2).
The module for a diagonal pattern of table arrangement using

the same choice for the table size, seat space and aisle space. The
size of the module for the diagonal pattern is 8 ft 4 in. (2.54 m) by 8 ft
in. (2.54 m), which gives a total area of 69.44 ft2 (6.45 m2). The
space per seat is 17.36 ft2 (1.61 m2)/seat, which is 2.89 (ft2 (0.27m2)
less than for the rectangular pattern. For the 100 seat dining room,
the diagonal pattern would require 1736 ft2 (161 m2), which is 289 ft2
(26.8 m2) less then the rectangular pattern.
Similar modules for other sizes or types of seating

arrangements can be developed. Care must be taken when using
different size tables so that the modules developed for each size
table are compatible at least on one side. For example, when tables
for twos and tables for fours are to be used, the modules can be 23
Food Service adjusted by selecting table shapes or sizes that give the same
Facilities Planning module dimension along one axis.
2.6.7 Production Areas
The space estimates for production areas include room for all
the functional areas, such as receiving, storage, preparation,
cooking, and ware washing that is required to produce the menu
items. Estimates for production areas for typical foodservice facilities
are given in table below.
Space per set Per seat

Type of Facility 2
(M ) (ft2)
Table service 8-12 0.74-1.11
Facilities that will be processing primarily fresh items should

use the higher space estimates. This allows for the additional
equipment and worker space needed. The smaller figures are used
for operations using preprocessed foods and require minimal
production space. A suggested percentage breakdown of the
production space for general table service operations is shown in
table below.
Functional Areas Space Allowed (%)

Receiving 5
Food Storage 20
Preparation 14
Cooking 8
Ware washing 5
Traffic aisles 16
Trash storage 5
Employee facilities 15
Miscellaneous 2
These percentage figures assume a typical operation using

fresh products. Baking of rolls, pastries and cakes are also assumed
to be done in the facility.
2.6.8 Space Calculations
Another approach to the problem of determining space

24 requirements is to calculate the space needed for each of the
functional areas separately. This is done by identifying and
determining the pertinent variables involved for the different Equipment
functional areas. It is assumed at this point that the individual Requirements
workplaces and pieces of equipment for the facility have been
determined and will now be grouped together. The space required
for the flow of materials and workers between the workplaces and
pieces of equipment is added as needed to develop the space to
allow for each function.
A brief discussion of some of the functional areas and the

variables affecting their space requirements will be given to illustrate
this procedure. Computational operations are presented as
applicable. Consideration of the traffic aisles is one of the common
variables for all areas and is therefore included.
2.6.9 Receiving Area
The main variable affecting the amount of space needed for

the receiving function are the number, type and size of deliveries that
are to be handled at one time. Many operations can have deliveries
schedules so-they will have to handle only one delivery at a time.
The types of materials to be received are considered because of the
variety of containers and packaging methods available. Ease of
opening, checking, moving and stack ability all have a bearing on the
space required.
The size of deliveries to be handled may depend on the

storage space available in the facility and is determined in
conjunction with storage space requirements. Storage space in turn
can be modified by the frequency of deliveries. A greater frequency
of deliveries can reduce the size requirements of the receiving space
requirements should be determined together after factors have been
evaluated. Needless to say, all requirement and work areas for the
receiving function must be provided for.
2.6.10 Storage Areas
The amount of dry refrigerator and freezer space required for

the facility is determined by the number of days of storage to be
provided for. A general recommendation for dry storage of foods is to
provide space for 2-4 weeks supply, depending on the availability of
the food items. The total volume of goods to be stored can be
estimated as follows. First determine the number of meals for which
storage is to be provided. An operation planning on serving 600
meals per day and desiring a two weeks supply will need storage for
8400 (600 meals per day x 14 days) meals. Next, estimate the
weight per meal of items that will be stored in the dry storage area.
This calls for an evaluation of all menu items. A general estimate
between ¼ and ½ Ib (0.113 and 0.227 kg) per meal may be used; it
is based on a total weight estimate per average meal of 1-1½ Ib
(0.227 kg) per meal is used, then the total weight to provide storage
for is 4200 Ib (1905 kg) (8400 meals x 0.5 Ib per meal). Then the
total weight computed is divided by an average density of 45 Ib per
ft2 (721 kg per m3), which will give the total volume of goods to be
stored. In this example, the total volume in cubic feet is 4200 Ib / 45 25
Food Service Ib / ft3 = 93.3. This indicates that space for 93.3 cubic ft (2.64 m3) of
Facilities Planning goods, exclusive of aisle space, will be needed.
If the goods are to be stored on shelves, the total square

footage of shelving can be computed by considering the height to
which the materials can be stored on the shelf. If the materials can
be stored to a height of 1 ft, then 93.3 (93.3 ft3 / 1 foot) ft2 (8.67 m2)
of shelving will be needed. If a height of 1½ ft (0.457 m) can be
used, then 62.2 (93.3 / 1,5) ft2 (5.78m2) of shelving is required. The
length of shelving is computed by dividing the square feet by the
width of shelving to be used.
This same method of computation can be used for the

refrigerator and freezer storage areas. The weight per meal of items
that will be stored in the refrigerators and freezers will vary between
0.75 and 1 Ib (0.340 and 0.454 kg). The average density of
refrigerator items can be assumed to have a density of 40 Ib/ft3
(641lg/m3).
The number of days of storage for refrigerator items may very

from one day to a week or more, depending on the methods of
operation used for the facility. Freezer items can be stored for longer
periods of time and are determined by the frequency of deliveries
available. An economic lot size analysis may be made to determine
the optimum size of storage to provide. The analysis compares
ordering, purchasing and receiving costs to the cost of the storage.
2.6.11 Serving Areas
Serving areas for most table service facilities are planned as

a part of the main cooking area and separate space determinations
are not usually needed. The pick-up area is included in the space
requirements for the main cooking area. Additional serving stations
for table service can be considered in computations for the dinning
area.
Cafeteria operations require separate space for the serving

function to allow room for the serving counter, room for guests and
room for servers. Variable affecting the size of the serving area are
the number of people to be served and the serving time allowed.
Serving line rates vary from 2 to 10 persons per minutes for straight-
line cafeteria counters. The serving line rate is dependent on the
number of choice and the number of servers. Shopping-center
counter arrangements can handle up to 20 or more persons per
minute.
The length of cafeteria counters is determined by the variety

and volume of food items to be displayed. Adequate space for
merchandising food items should be allowed.
The space required for straight-line counters may be roughly

estimated at 10-15 ft2 (0.929-1.39m2) of floor space for each
counters, customer aisles, room for servers, and back-bar
26
equipment. Shopping-center arrangements generally required 18-20
ft2 (1.67-186m2) of floor area for each linear foot (0.305m) of counter.
The sizing of serving facilities for cafeterias is directly related Equipment
to the capacity of the dining area, Ideal design results when the flow Requirements
of people from the serving facility is balanced with the seating
available in the dining room. At equilibrium conditions, the flow rate
of people leaving the serving areas and entering the dining area
should equal the flow rate of people leaving the dining area. In other
words, the number of seats provided in the dining area has a direct
relationship to the rate of people leaving the serving line for a given
average eating time. The relationship can be expressed by the
equation.
R = N/T
Where R-rate of people leaving serving area, N = number of

seats in dining area, and T = average eating time.
For example, a 200-seat dining room where the average

eating time is 20 minutes should have serving facilities capable of
handling 0 (R=200/20) Persons per minute. If the eating time is 30
minutes, a serving facility must be able to handle 6.7 (R=200/30)
persons per minute.
CHECK YOUR PROGRESS
1. Broilers are available in either ………… or………….. models

2. The space required is best determined by considering all the
factors involved, including the ……………………………….
3. How do you determine the dining area turnover?
2.7 LET US SUM UP
Equipment requirements are best determined from a

complete analysis of typical menus. For each food item on the menu,
information regarding anticipated number of portions to be prepared,
portion sizes, batch sizes, main ingredients, and the processes to be
performed are indicated. At this point in the planning process, it can
be found desirable to add, delete, or change some of the menu items
or processing methods in order to achieve greater equipment
utilization.
Methods determining the specific equipment requirement for

the proposed foodservice facility is one aspect of design on which
considerable time can be spent. During this part of the planning
process, the foodservice consultant has to estimate accurately the
capacity of each of the various types of foodservice equipment to be
used.
A systematic method of determining equipment capacity

required is to analyze each food item appearing on the menu. The
capacity of equipment should be determined with future changes
anticipated. Trend can be studied, and any anticipated changes in
foods, sales volume, or meals offered can be projected to see if 27
drastic changes in equipment will be necessary.
Food Service 2.8 LESSON END ACTIVITY
Facilities Planning
1. Draw the chart for your reference to mention the approximate
cooking time for grilling various food items
2. List out the points to be considered while selecting equipment.
3. Do the chart work for identification of requirements for various
presentations
2.9 KEY WORDS
Management Act of Managing

Conceptulation Making An Idea
Facility Making Ease
Consultant Advisor
Feasibility Practicable
Architect Designer
1. Write in details about Equipment requirements.

2. What are the points to be considered in deciding the make and
model of equipment?
3. List out the various equipment and explain it.
4. Give a brief about Space requirements.
CHECK YOUR PROGRESS
1. gas or electric
2. floor space needed for the employee, working surface space for
manual tasks.
3. The turnover is determined by estimating the average time a seat
is occupied for the time period desired.
2.11 REFERENCES
1. Edward A. Kazarin (1983), Food Service Facilities Planning, Van

Nostrand Reinold Company.
2. Joseph Ransely (2001), Developing Hospitality Properties &
Facilities, British Library.
3. David M Stipaunk, Hospitality Facility Management, S.K. Hajra –
Production Management Accounting
28
LESSON 3
CONSTRUCTION WORKS PLANNING
CONTENTS
3.1 Introduction
3.2 Bidding and Awarding Contracts Planning
3.3 Construction Works Planning
3.3.1 Guidelines for Building New Hotels
3.3.2 Funding
3.3.3 People
3.3.4 Create Barriers to Competition
3.3.5 Marketing
3.4 Let Us Sum Up
3.6 Key Words
3.8 References

following:
 Bidding and awarding contracts planning and
 Construction works planning.
3.1 INTRODUCTION
Every planning is well guided by well defined objectives.

These objectives may be determined by the owner and various
consultants. Written statements outlining the objectives in details are
preferred, so that misunderstandings between owner and planner
are avoided. The general objective for all food facility planning is to
make optimum use of money, materials, manpower and equipment
to yield the highest quality of food and service. The basic concept is
assuring customer or user satisfaction. It means the food service
facility has to be designed so that the food has to be freshly
prepared and be appealing and tasty. Other objectives of food
service facility are the physical facilities and the operational
concepts.
3.2 BIDDING AND AWARDING CONTRACTS PLANNING
On large projects involving building construction, the final

drawings and written specifications are made available to contractors
who are interested in submitting bids. On smaller projects, different
arrangements for the work to be done can be made. For any project
Food Service to be put out for bids, a standard set of documents, including bid
Facilities Planning forms, forms for bonds, insurance requirements, instructions to bides
and legal considerations, is available. Most architects use the
documents entitled “The Conditions of the Contract for Construction
of Buildings” prepared by the American institute of architects as a
guide for preparing these forms. Separate bids may be taken for
food service equipment.
When bids are received, the architect and other consultants

involved in the planning will review then and make recommendations
for the awarding of the contract for construction. If the drawings,
specifications and bidding documents are complete, the lowest
bidder will usually get the recommendation. This does not have to be
true in cases where the bidder has made exceptions to the
specifications in preparing the bid.
After the construction contracts are signed, the contractor will

make detailed roughing-in drawings for all utilities to be used in the
facility. These drawings are referred to as shop drawings and are
checked against the architect’s mechanical and electrical drawings.
The shop drawings are approved before actual construction begins.
3.3 CONSTRUCTION WORKS PLANNING
During construction, the architect and foodservice consultant

periodically check and evaluate the progress of the project. The
completed building is accepted only after the architect has made a
final inspection and is satisfied that all work has been completed as
specified.
The finished facility will reflect pains taken during the

planning phases. If the planning was done carefully, the result will be
functional productive, and aesthetic. Careless or haphazard
planning, on the other hand, usually results in a facility that will be
inadequate for efficient foodservice operations. It is too late to think
about the importance of good planning after construction has been
completed.
3.3.1 Guidelines for Building New Hotels
Experience and studies by a number of organizations on

developing new hotels show that two general guidelines or rules of
thumb are invariably accurate. They refer to the relationships
between:
 Cost per room of the completed hotel and the room
price necessary to achieve viable product.
 Land price as proportion of the total development
cost.
In the first guideline, the correlation is on the basis of 1/1000

of the room price against $1000 to build the bedroom. For example,
if it costs $98000 to build a hotel bedroom, the finished bedroom
30 should achieve a rate of $9500 per night on the basis of the total
hard costs [i.e. construction and fitting out, professional fees] and Construction Works
soft costs finance costs, pre opening charges and working capital of Planning
the hotel divided by the actual number of keys.
3.3.2 Funding
Branding can help attract funding or investors – Hilton.

Example, May often get the first choice of development opportunities
be automatically included on any short list of potential opportunity
simply because of recognition and loyalty to the brand name.
3.3.3 People
Strengthening human resource strategies through training

recruitment policies – many of the luxury hotel groups [ for examples
season] attract and retain employees, often through the prestige
being or feeling part of the group.
3.3.4 Create Barriers to Competition
This can work in reverse in the industry; however, the fact

that a group such as Hilton endorses location might suggest there
must be demand at that level competitor.
3.3.5 Marketing
Making it easier to penerate new markets and location,

enable large hospitality groups to get the first pick of the
opportunities.
Pricing commanding a premium tariff for the product or

service was the case with Thistle hotels.
CHECK YOUR PROGRESS
1. Define marketing?
2. The complete building is accepted only after the architect has
made a ……………….
3. The conditions of the contract for Constructions of Building”.
Prepared by the ……………….. as a guide for preparing these
forms.
3.4 LET US SUM UP
On large projects involving building construction, the final

drawings and written specifications are made available to contractors
who are interested in submitting bids.
The finished facility will reflect pains taken during the

planning phases. If the planning was done carefully, the result will be
functional productive, and aesthetic. Careless or haphazard
31
Food Service planning, on the other hand, usually results in a facility that will be
Facilities Planning inadequate for efficient foodservice operations.
Experience and studies by a number of organizations on

developing new hotels show that two general guidelines or rules of
thumb are invariably accurate.
1. Find out the various guidelines for building new hotels
3.6 KEY WORDS
Aesthetics pertaining to a sense of beautiful, characterized by a

love of beauty.
Bidding is an offer of setting a price one is willing to pay for

something. (a price offer is called a bid)
Hapazard characterized by lack of order or planning
1. Explain in details about bidding and awarding contracts?

2. What do you mean by construction works planning?
3. Give the guidelines for building new hotels.
CHECK YOUR PROGRESS - ANSWER
1. Marketing is the activity of exchanging offerings for customers,

clients and society at large
2. Final, Inspection
3. American institute of architects
3.8 REFERENCES
1. Edward A Kazarian, Food Service Facilities Planning, Van

2. Jose Ransely, Developing Hospitality Properties & Facilities,

British Library.
3. David M Stipaunk, Hospital Facility Management, S.K.Hajra –

Production Management Accounting.
32
LESSON 4
PLANNING TEAM
CONTENTS
4.1 Planning Team Members
4.2 Owner
4.3 Architect
4.4 Foodservice Consultant
4.5 Specialists on the Planning Team
4.6 Interior Designers
4.7 Landscape Architects
4.8 Land Developers and Realtors
4.9 Let Us Sum Up
4.11 Key Words
4.12 Sugessted Questions
4.13 References

following:
 Planning Team Members
 Owners
 Food Service consultant
 Interior Designers and
 Land Developers and Realtors.
4.1 PLANNING TEAM MEMBERS
Most large foodservice construction projects are planned by a

team of individuals working cooperatively to achieve the final plan.
All members of the planning team supply their own area of expertise
to the project. The typical primary members of the planning team for
a large project include the owners or their representatives, an
architect and various staff members, and a foodservice consultant. In
some projects, additional members, such as interior designers or
landscape architects, may be involved if there is need for their
specialized services. Some architects who do a lot of foodservice
projects will have foodservice consultants and other types of
consultants on their staff. However, the owner is free to use an
independent foodservice consultant or other outside consultants if
desired.
Food Service In some cases, special consultants may be included on the
Facilities Planning planning team to handle problem areas of planning. These
consultants may specialize in accounting method, marketing, legal
aspects, lighting systems, colours, acoustical methods, or structural
design. The work of any of these special consultants is generally
coordinated by the architect.
Smaller planning projects that do not involve major

construction or structural building changes can be handled without
the services of an architect. The remodeling of dining areas or
production facilities, for example, may be entirely handled by a
foodservice consultant. Some large foodservice organizations have
their own planning department and do not require outside architects
and consultants.
Regardless of the nature of size of the planning team, each

member has certain tasks and area of responsibility. These may be
under taken by the team members themselves, or they may assign
or arrange for others to do the actual work under their supervision.
For example, architects frequently will hire lighting engineers to plan
and design the lighting system for the facility. However, the architect,
who is responsible for this area of planning, must approve the work
of the lighting engineer.
4.2 OWNER
The owner or the owner’s representative is a key individual in

the planning team, since basically all design and planning decisions
must be approved by the owner. The owner is usually responsible for
seeing to the completion of the planning functions outlined next.
(Frequently the owner will rely on others to do the actual work
involved, but must still approve and bear the responsibilities for
these areas). Develop statements of basic goals and objectives for
the project. Develop the basic operational concepts for the
foodservice facility. Assure that all legal and other regulatory
restrictions that may influence the project have been checked out or
cleared before too much time in planning is committed. This includes
the area of deed restrictions, codes, zoning ordinances, and
licensing that pertain to the construction and operation of the food
facility.
Complete the market analysis (frequently done by outside

consultants hired by the owner). Decide or approve all financial
matters such as procurement of investment capital, financing
methods, interest rates, and payment schedules. Complete and
approve the feasibility study. Feasibility studies are often done by
accounting firms specializing in foodservice operations. Develop
policies regarding standard of operation for the food service facility.
The owner may rely on a foodservice consultant’s advice on this
matter. Select the architect and/or other members of the planning
team. Select and approve designs and plans submitted by the
various members of the approved and sign contracts. Services of a
legal advisor may be used here.
34
4.3 ARCHITECT Planning Team
The architect is another key individual in food facility planning

and coordination. All projects involving the new construction of public
spaces have to be planned or approved by a licensed architect. The
complexity of planning a new food facility has cost the architect in
the role of an editor who has to coordinate, develop, select, and
supervise all the various phases of planning. Some of the areas of
responsibility of the architect, with a staff engineers and other
supporting individuals, are the following:
(1) Site planning considerations such as building

orientation, traffic patterns, parking areas, service areas
and the location of entrances and exists Topographical
changes required for drainage. Building design from the
standpoint of shapes and configurations. Structural
design of floors, walls roofs, and ceilings.
(2) Exterior treatment of walls, windows, entrances, exists

and roofs. Interior treatment of floors, walls, windows,
doors and ceilings. Selection of building materials.
Determination of construction methods to be used.
Checking building and construction codes for
acceptable materials and construction methods.
(3) Design of the lightning system. Coordinating the work of

foodservice consultants, interior designers, and any
other consultants working on the project. Preparing
plans and blueprints for the facility (the foodservice
consultant usually prepare the plans and blueprints for
the kitchen and dining areas only).
(4) Writing specifications for materials and constriction

methods. Developing cost estimates. Preparing bid
documents. Analyzing bids for construction. Checking
shop drawings provided by contractors. Inspecting
construction of the building and installation of
equipment.
Early in the planning process, the owner will select the

architect to perform the just-mentioned tasks of planning. Selection
of the architect is a very important matter, which must be done
carefully if the owner expects to get the type of facility desired. The
selection usually begins with a list of prospects, whose names may
be obtained from various sources. It is best to seek out architects
who specialize or do a good portion of their work in the foodservice
field. Checking with other foodservice or architects is one way of
developing a list of prospects. Other sources are the local chapter of
the American Institute of Architects. Before deciding upon an
architect to do the planning, the owner will want to consider a
number of points relating to the ability of the architect. The following
areas sometimes used as a basis for selection:
35
Food Service  The design philosophy and creative ability of the
Facilities Planning architect to develop an aesthetic facility.
 The engineering design philosophy that the architect
follows.
 Experience and reputation for designing foodservice
facilities.
 Professional ethics.
 Size and type of staff.
 Reputation for completing scheduled work on time.
 Methods of researching and specifying new materials
 Cost consciousness.
 Accessibility to Specialized consultants.
 Recommendations of satisfied clients.
 Ability to work with other consultants.
 The matter of fees is also important in the selection of
an architect. Architectural fees are usually quoted on
one of three different bases:
 A percentage of the total construction cost.
 A lump sum, for which the project scope must be
clearly defined.
 Cost plus a percentage fee.
Architects charge additional fees for extra services, such a

conducting feasibility studies, changes in plans after they have been
approved, or special drawings and models. They may also add a fee
for the coordination of outside consultants that are brought into the
project.
4.4 FOODSERVICE CONSULTANT
The foodservice consultant is an individual who is familiar

with all aspects of foodservice operation. The foodservice consultant
is especially knowledgeable in the areas of menu planning, service,
food merchandising and the handling of food through the various
storage, preparation, processing, and cooking steps. The
foodservice consultant should also be familiar with management
principles and the design of foodservice equipment and have a
general knowledge of architecture, engineering, and interior design.
The foodservice consultant is responsible for the design of all

aspects of the foodservice operation and consequently must work
closely with the architect. Obviously, the owner and the architect
together should select a foodservice consultant that is satisfactory to
both. The best time for this selection is when the architect is
commissioned.
The foodservice consultant may advise both the owner and

the architect on certain aspects of the total design of the facility, they
specifically, however, are involved in the following areas of
responsibility.
 Development of the menu including food items, portions,

36 prices and format.
 Determining methods of service for food and beverages. Planning Team
 Creation of the dinning atmosphere (usually with the help of
interior designers).
 Determining functions and tasks to be performed in the food
facility, including the selection of materials and processes.
 Development of control procedures for food, beverages, cash
linen, and other materials
 Preparation of potential profit and loss statements and
budgets for the foodservice based on projected sales and
costs.
 Advising the owner on preferred operating policies.
 Determining specific items of foodservice equipment to be
used in the facility.
 Determining adequate space requirements for all the
foodservice functions to be performed.
 Developing efficient space arrangements and layouts for the
facility including dining areas.
 Development of operational instructions for the use of the
food facility and especially for the use of the foodservice
equipment.
 Preparation of cost estimates for the foodservice aspects of
the facility
 Preparation of all plans required for installation of equipment
in the dining and production areas.
 Checking equipment design for safety features and ease of
cleaning.
 Writing specifications for all items of foodservice equipment,
furnishings and supplies.
 Determination of utility connections and capacity required for
the foodservice equipment.
 Checking contractors’ shop drawings for all foodservice
equipment installations.
 Inspection of equipment installation.
 Coordination with architect on information required for
preparation of the bid documents.
 Helping in the analysis of bids.
In general, the foodservice consultant deals with all aspects

of design except the architectural, structural, and general mechanical
work done by the architect. The close cooperation needed between
the architect and the foodservice consultant is evident in the
overlapping of their respective responsibilities in the design process.
The wise owner pays as much attention to selection of the
foodservice consultant as to choosing the architect.
The services of a foodservice consultant may be obtained

form independent consultants or from individuals associated with
manufacturers or suppliers of foodservice equipment. Many of the
37
Food Service independent foodservice consultants are identified by their
Facilities Planning membership in the Foodservice Consultants Society International.
Foodservice consultants generally work under one of three

payment methods. One method is based on a percentage of the cost
of food preparation and service equipment this cost is based on all
equipment that is specified by the foodservice consultant only, and
does not include any items specified by the architect. The second
payment method is a const-plus arrangement where the consultant
will provide service on the basis of a multiple of the actual costs
involved. A third possible payment method is a per day arrangement
where the consultant is paid for the total number of working days
devoted to the project.
4.5 SPECIALISTS ON THE PLANNING TEAM
The owner, the architect, and the foodservice consultant are

the main members of the planning team, and most foodservice
projects are completely planed by these individuals. In projects
where special requirements are needed or where special emphasis
is to be placed, other individuals may be called in as members of the
planning team. Some of these, and the contributions they can make
toward the planning of the food facility, are indicated next.
4.6 INTERIORS DESIGNERS
The services of interior designers are required when special

emphasis is to be placed on creating a unique interior. Interior
designers will usually work with architects in developing the following
areas:
 Selection of furniture for the facility.
 Selection and coordination of interior wall and floor
coverings
 Development of the color scheme for all interior
surfaces
 Treatment of windows (drapes, shades and curtains)
 Selection of lighting fixtures.
 Selection of decorator items, including items for dining
tables such as tablecloths, china, and silver
 Creation of special lighting effects.
 Development of shapes and sizes for areas and
rooms by the use of dividers, plants, balconies etc.
 Selection of uniforms for employees.
4.7 LANDSCAPE ARCHITECTS
A landscape architect may be needed for projects demanding

special treatment of the grounds surrounding the foodservice facility.
Among the services that are contributed by landscape architect are
the following:
 Development of the total landscape plan for the facility.
 Selection and arrangement of trees, shrubs, and flowers
38
 Development of lawn and garden areas.
 Design and placement of exterior lighting. Planning Team
 Development of exterior pathways.
 Enhancement of desirable exterior building features.
Although a landscape architect may be selected after the

building has been constructed, it is desirable to hire one at the same
time, and other consultants are retained to contribute to the overall
planning of the facility.
4.8 LAND DEVELOPERS AND REALTORS
Land developers and realtors are involved in those projects

that require the acquisition of land or space for the proposed food
facility. Foodservice facilities are frequently a part of a larger
development such as shopping malls, apartment complexes, or
office buildings, and land developers will sometimes seek out
foodservice operators to install and operate these facilities.
The land developers and realtors are well versed in zoning

ordinances and can be valuable in selecting sites or spaces for a
food facility. Their knowledge of land values, future developments,
and identification of growth areas of a community is useful in making
decisions regarding a particular project.
CHECK YOUR PROGRESS
1. Who is a food service consultant?

2. The food service consultant should also be familiar with
……………… and the ………………..
3. The land developers and realtors are well versed in ……………
and can be valuable in selecting ……….. or ………….. for a food
facility.
4.9 LET US SUM UP
Smaller planning projects that do not involve major

construction or structural building changes can be handled without
the services of an architect. The owner or the owner’s representative
is a key individual in the planning team, since basically all design
and planning decisions must be approve by the owner. The owner is
usually responsible for seeing to the completion of the planning
functions outlined next.
Site planning considerations such as building orientation,

traffic patterns, parking areas, service areas and the location of
entrances and exists Topographical changes required for drainage.
The foodservice consultant is responsible for the design of all

aspects of the foodservice operation and consequently must work
closely with the architect. 39
Food Service The land developers and realtors are well versed in zoning
Facilities Planning ordinances and can be valuable in selecting sites or spaces for a
food facility. Their knowledge of land values, future developments,
and identification of growth areas of a community is useful in making
decisions regarding a particular project.
1. List out the points to be bear in mind before selecting furniture.

2. Identity the roll of food service consultant
4.11 KEY WORDS
Landscape comprises the visible features of an area of land

Realtor a person who is authorized to act as an agent for the
sale of land
Topography is the study of earth’s surface shape and features or
those of planets moons, and asteroids
1. Write short notes on land developers and realtors.

2. List out the responsibilities of food service consultant.
3. Explain the role of Architect.
4. Write the significance of Interior designer.
1. The foodservice consultant is an individual who is familiar with all

aspects of foodservice operation and having special knowledge
in the areas of menu planning, service, food merchandising and
the handling of food through the various storage, preparation,
processing, and cooking steps etc.
2. Management principles, design of foodservice equipment.
3. Zoning ordinances, sites, spaces.
4.13 REFERENCES

Nostrand Reinold Company
British Library.
3. David M Stipaunk, Hospital Facility Management, S.K.Hajra –
4. Harold koontz, Essentials of Management, Heinz Weihrich.
40
LESSON 5
PLANNING PROCESS
CONTENTS
5.1 The Planning Process
5.1.1 Preparing the Prospectus
5.1.2 The Feasibility Study
5.2 The Planning Process
5.3 Preliminary Planning Information
5.3.1 Market
5.3.2 Menu
5.3.3 Service
5.4 Type of Foodservice Facility
5.4.1 Atmosphere
5.5 Operating Characteristics
5.6 Feasibility Information
5.7 Developing the Concept
5.8 Equipment Requirements
5.9 Let Us Sum Up
5.11 Key Words
5.13 References

following:
 The Planning Process

 Planning Information
 Types of Food Service Facility
 Feasibility Information and
 Equipment Requirements.
5.1 THE PLANNING PROCESS
Preliminary planning information, prospectus, commissioning

planners, developing the concept, equipment requirements, space
requirements, developing preliminary plans, preparation of final
plans, preparing specifications, bidding and awarding contracts,
constructions.
5.1.1 Preparing the Prospectus
Importance customer and user characteristics, development

of the menu, service atmosphere, operational characteristics.
Food Service 5.1.2 The Feasibility Study
Facilities Planning
Importance, the market survey, site analysis, cost estimates,
operating capital, projected income.
5.2 THE PLANNING PROCESS
The planning of a complete food service facility requires the

assimilate the information necessary by the complexity of the people.
There are some steps to be completed before further planning can
proceed. The planning process can have many starting points or the
various phases involved in a different order. The planning process
begins when there is an idea generated a desire to be fulfilled, or a
pressing need for a food service facility.
The Project may originate in a market survey that indicates

the need for a new restaurant in an area or a developer may have a
particular location that may be suitable for a food service operation.
Some planning projects are created by necessity because they are
an integral part of a larger project where food service is desired.
Examples are building of new hospitals, schools, nursing homes and
office facilities. Some other are created because they are solutions
to problems of high labour costs, lack of sales volume or
obsolescence in existing operations.
5.3 PRELIMINARY PLANNING INFORMATION
After the concepts or ideas for a proposed project have been

formulated, the next logical step is to delicate the preliminary
planning information and decisions that will characterize the food
service facility. This information will be used to guide the overall
planning of the project and therefore should be carefully considered.
There should be enough detail so that the remaining steps of the
planning process can be carried out smoothly.
The points to be considered when gathering and developing

the prelimininary planning information.
 The information is to be used for guiding the overall design of
the project, but it does not give all the final answers to all the
problems of design.
 Information should be general enough to allow for some
flexibility in planning.
 Information should be specific on the other hand, or any
aspects that are inflexible such as a fixed site, a fixed budget
or a fixed size of a building.
 Some of the information gathered may be subject to change
after further study and research are completed on the
proposed project.
 The information represents a comprehensive summary of the
44 major objectives and requirements desirable for the project.
In the next stage involves the development of the prospectus. Planning Process
The prospectus is basically operational model of the food service
facility. This part of planning process may be planted by owner or
frequently a food service consultant will be retained to accomplish
the task.
In the prospectus the general and the preliminary information

regarding the proposed project is evaluated and fairly detailed
descriptions of how the food facility is to function and speared.
Considerable research into the areas of marketing, sales estimating,
production techniques, control and management is required to
develop a well prepared prospectus.
The complete description of preparing the prospectus is

presented and to show the relationship to other steps in the planning
process. This steps is so important to the success of planning effort
that a detailed presentation of developing a completed prospectus.
 Market
 Menu
 Service
 Type of foodservice facility
 Atmosphere
 Operating characteristics
 Feasibility information.
5.3.1 Market
A detailed analysis and description of potential customers or

users of the proposed foodservice facility is the first task to be
accomplished in developing the information behavior and any
anticipated changes in these characteristics. Actually, the detailed
information regarding the customer or user is easier to complete the
other areas of the prospectus.
5.3.2 Menu
The next step in developing the prospectus is to determine

the characteristics of the menu that best describes the market.
Menu characteristics regarding frequency of change numbers of
foods items in each category to be offered, and the type of food item
from the standpoint of a la carte versus compete meals are decided.
Other factors include portion sizes, cooked-to-order versus prepared
items, or items requiring batch preparation, and any other special
features of the menu. Preparation of a typical menu with the
suggested format, actual food entrees and portion sizes would be
desirable at this stage, because the menu is the key to the
development of the rest of the prospectus. All the decisions
regarding the menu should correlate with the characteristics of the
potential customer in order to maximize sales. The decisions
regarding the menu are the most important aspect of preparing the
prospectus, since most of the other decision regarding the design of
the foodservice facility are dictated by the menu.
45
Food Service 5.3.3 Service
Facilities Planning
The next area to be considered in preparing the prospectus is
determination of the type of service to be offered in the facility. This
is decided by evaluating both the market and the menu in order to
select the most appropriate type of service or combination of types of
service, if more than one is desirable. Consideration of standards is
also appropriate at this time.
5.4 TYPE OF FOODSERVICE FACILITY
The decisions regarding the market, the menu and the type of
service can now serve to characterize the particular type of
foodservice facility to be planned. The description can be started in
very general terms, such as cafeteria, coffee shop, specialty
restaurant, or drive-in. The classification of the type of foodservice
facility enables the planner to utilize specialized information available
for such operations and simplifies completing the prospectus, as well
as the remaining steps of the planning process.
5.4.1 Atmosphere
At this point in the development of the prospectus, the

concept of the type during atmosphere to be developed for the
facility is decided. Food service atmosphere may be identified by
such terms as formal, informal, cheerful, friendly, relaxed, or
appealing. The creation of the dining atmosphere is accomplished by
proper selection of colors, furnishings, wall and floor covering,
lighting and by careful control of temperature, relative humidity, noise
and odors. Costuming and attitude of employees are also important
for the development of a desirable dining atmosphere. A separate
chapter is devoted for discussing the creation of atmosphere
because it is so critical to the success of a food facility.
5.5 OPERATING CHARACTERISTICS
The description of the market and the decisions regarding the

menu and the type of service also lead to identifying the operating
characteristics of the food facility, which is another component of the
prospectus. Operating characteristics to be determined include days
of operation per year, home open per day, seasonal variation
expected, and the expected meal loads per meal period and during
peak periods.
Others operating characteristics described in the prospectus

include the type of organization and management policies under
which the food facility will operate. These can breakdown. Control
concepts and procedures, merchandising methods, public relations,
special operational concepts that may be unique to a particular food
facility should be adequately emphasized so that appropriate
planning decisions can be made.
46
5.6 FEASIBILITY INFORMATION Planning Process
An essential part of the prospectus deals with the financial

aspects of the proposed food facility. This obviously is a very critical
point in the planning process and should be prepared as carefully as
possible. In some instances, the feasibility study is done separately
from the prospectus by a qualified consultant. The information
pertain to the particular site or location. The concept of facility size in
terms of number of seats or number of meals is determined as well
as preliminary space estimates for the building. These are used to
estimate income and costs. Seat turnover and check averages are
used to develop sales volume for the foodservice facility.
Expected food and beverage costs are developed and

estimates of labour, overhead, and other operational costs are
prepared. A proposed budget, projected cash flow, return on
investment, and other financial considerations are also estimated in
order to evaluate the feasibility of the project. Chapter 5 is devoted to
a detailed presentation of making the feasibility study because of the
importance of this aspect of planning.
After the prospectus has been completed, it is reviewed to

make sure that all the concepts are workable and that the
information presented is as accurate as possible. If all concerned
and it appears that the proposed project can be economically
undertaken, then the planning process can continue.
A med with the prospectus, the owner or the owner's

representatives can approach and evaluate the individuals who will
make up the planning team for the project. Hopefully, the selection of
the architect, the foodservice consultant, and other members of the
planning presented in the prospectus. Architects and consultants will
show prospective clients completed projects they have done for
others so the owner can make an intelligent choice. After selection
and commissioning of the architect and other consultants has been
completed, the detailed planning of the proposed project can begin.
Whenever a group of individuals is involved in the planning

process, some of whom work independently, it is advisable to be
written understanding of what functions each members of the group
will undertake and be responsible for. This will eliminate duplicated
effort and assures that the planning team will work effectively
together.
The key members of the planning team will meet with the
owner or the owner's representative to outline the necessary
planning toss. At this meeting, the prospectus is again reviewed to
make sure it contains all the information necessary for the various
members of the planning team. It is not uncommon for certain parts
of the prospectus to be altered as this time to make an advantage of
ideas and concepts that may be presented by the planning group
regarding a proposed project because of their experience and
knowledge about the foodservice field.
47
Food Service 5.7 DEVELOPING THE CONCEPT
Facilities Planning
This phase of the planning process involved identifying or
visualizing the various functions and tasks that must be performed to
meet the objectives of the food service facility. It is necessary not
only develop space and equipment requirements but also to aid in
the final arrangement and layout of the facility. Identification also
simplifies the gathering required for proper planning of the entire
food service facility. The functions are determined by using the
prospectus and the proposed menu as a guide. The common
functions can be purchasing, receiving, storage, preparation,
processing and serving. Supportive functions such as ware washing,
trash and garbage disposal, maintenance and sanitation.
Management functions of control, planning, supervision and
evaluation are too included.
The guest requirements and employee requirements like

parking areas, waiting areas, washrooms, locker facilities, office
facilities and training facilities are also identified as necessary
functions.
The basic step is the task analysis. The evaluation of these

tasks determines space and equipment requirements. The basic
tasks involves counting, weighing, determining quality, moving
materials and checking orders. The method of performing and task in
evaluated by considering the materials involved, type of equipment
that may be used and the skills by the employees. This requires data
gathering and research before deciding the method of performing the
task. The data obtained are summarized so that the planners can
take appropriate decisions regarding the design of the work areas to
be developed.
5.8 EQUIPMENT REQUIREMENTS
Equipment requirements are determined by the complete

analysis of the typical menus. For each food item on the menu,
information regarding number of portions to be prepared. Portion
sizes, batch sizes, main ingredients and the process to be performed
are to be indicated.
The information can be taken from the menu directly or the

food service consultant will rely on knowledge of production to
generate the information. From the production process identified the
planner can decide weather equipment is to be used or it can be
done manually. If equipment is required then the planner will decide
the type and the quality. Same time various types of equipments are
selected, the total time used by the equipment for the process will be
recorded. After each process the equipment usage and the final
equipment capacity can be determined.
48
CHECK YOUR PROGRESS Planning Process
1. How does the creation of dining atmosphere is accomplished?

2. For each food item on the menu, information regarding
………….. to be prepared.
3. Equipment requirements are determined by the complete
analysis of the ………...................
5.9 LET US SUM UP
The planning of a complete food service facility requires the

assimilate the information necessary by the complexity of the people.
There are some steps to be completed before further planning can
proceed.
The complete description of preparing the prospectus is

presented and to show the relationship to other steps in the planning
process. This steps is so important to the success of planning effort
that a detailed presentation of developing a completed prospectus.
The decisions regarding the market, the menu and the type of
service can now serve to characterize the particular type of
foodservice facility to be planned. The description can be started in
very general terms, such as cafeteria, coffee shop, specialty
restaurant, or drive-in.
Others operating characteristics described in the prospectus

include the type of organization and management policies under
which the food facility will operate.
Whenever a group of individuals is involved in the planning

process, some of whom work independently, it is advisable to be
written understanding of what functions each members of the group
will undertake and be responsible for. This will eliminate duplicated
effort and assures that the planning team will work effectively
together.
The basic step is the task analysis. The evaluation of these

tasks determines space and equipment requirements. The basic
tasks involve counting, weighing, determining quality, moving
materials and checking orders.
Equipment requirements are determined by the complete

analysis of the typical menus. For each food item on the menu,
information regarding number of portions to be prepared. Portion
sizes, batch sizes, main ingredients and the process to be performed
are to be indicated.
49
Facilities Planning
1. Write your own essay for developing the prelimininary planning
information.
2. Identify the requirement of equipments.
5.11 KEY WORDS
Storage Are deliveries made daily, weekly or even monthly
Site Constraint high or low rise singular or multiple

accommodation blocks
Climate including internal and external circulation, leisure

facilities, balconies, water storage, capacity
1. What is the type of food service facility?

2. List out the Equipment requirements.
1. The creations of the dining atmosphere is accomplished by

proper selection of colours, furnishings, wall and floor covering,
lighting and by careful control of temperature, relative humidity,
noise and odours.
2. Number of portions.
3. Typical menus.
5.13 REFERENCES

British Library.
3. David M Stipaunk, Hospital Facility Management, S.K.Hajra -
4. Harold Koontz, Essentials of Management, Heinz Weihrich.
50
LESSON 6
PLANS AND SPECIFICATIONS
CONTENTS
6.1 Developing Preleminary Plans
6.1.1 Cost Estimates
6.1.2 Preparation of Final Plans
6.2 Preparing Specifications
6.2.1 Performance Specifications
6.2.2 Descriptive Specifications
6.2.3 Reference Specifications
6.2.4 Proprietary Specifications
6.2.5 Base-Bid Specifications
6.3 Bidding and Awarding Contracts
6.4 Construction
6.5 Let Us Sum Up
6.7 Key Words
6.9 References

following:
 Developing Preliminary Plans
 Preparations of Final Plans
 Preparation Specifications
 Bidding and Awarding Contracts and
 Construction.
6.1 DEVELOPING PRELIMINARY PLANS
The next phase is the preparation of preliminary sketches

and drawings for the facility. Ideas related to the building structure,
site, and location of various facilities such as parking and receiving
areas related to the building are developed. Many planners use the
ideas from the existing operations that they know are workable.
The preliminary plans generally include floor plans showing

the arrangement of equipments, aisles and functional area location.
The pictorial view of the selected areas is prepared to provide the
better grasp of the final design. There may be several changes made
before the plan is acceptable.
Food Service 6.1.1 Cost Estimates
Facilities Planning
It is impossible to determine the exact costs in early in the
planning process; preliminary estimates should accompany the
sketches. These include the cost estimates for the building, site
preparation, equipment and furnishings. These costs are estimated
on the basis of square footage or cube footage of the building.
6.1.2 Preparation of Final Plans
After the approval of the preliminary sketches and drawings

the next stop is the development of the specifies of the design. The
equipment capacities, workplace design, door sizes and locations,
aisles and other details are finalized and blended into a finished
layout for the food service facility. When the final layout is approved
the structural details, building materials, utility requirements and
distribution and a multitude of other details are decided and put into
plans and specifications.
The final plans are drawn are referred to as working drawings

and these are drawn to scale and dimensioned to show sizes and
location of equipments and areas. These plans will be used for
construction and installation purposes and must be accurately
prepared with the work drawings and written specifications.
6.2 PREPARING SPECIFICATIONS
Specifications are the written description of the proposed

project. The specifications are used to clarify any items that may be
questionable. To illustrate notations which are short, general and
describe a type of equipment or construction method. The
specifications will expand on the characteristics of the materials
involved and the workmanship desired in installing them. The
specifications will completely describe the sink and establish such
details as type of stainless steel, construction of the joints, degree of
finish, type of supports and many other characteristics of design.
The specifications are used for estimating costs and for the
preparation of bids by construction contractors. A complete set of
specifications will expand and clarify the working drawings, define
precisely the quality of materials, equipment and workmanship,
establish the scope of work to be performed and spell out the
responsibilities of the prime construction contractor.
There are several other specifications in written including:
i) Performance Specifications
ii) Descriptive Specifications
iii) Reference Specifications
iv) Proprietary Specifications
v) Base-Bid Specifications.
52
6.2.1 Performance Specifications Plans and Specifications
It describes the work to be done by the results desired. It

allows the contractors enough freedom to employ their knowledge
and experience to provide the desired results. They will design and
select the various components, provide the necessary structural
members and assemble the components to comply with the
specifications.
6.2.2 Descriptive Specifications
The most detailed type of specifications is the descriptive

specifications. It describes the components of the building or piece of
equipment and how these components are to be assembled. These
specifications identifies the physical properties of the materials, sizes
of each components, spacing of supporting members, sequence of
assembly and many other requirements. In this type of specifications
the architect, engineer or consultant assumes the responsibility for
the performance of full design.
6.2.3 Reference Specifications
Many companies state in their literature and catalogs that

products of equipment conform to specific recognized standards.
Electrical components are commonly built according to the
underwriter’s laboratories standards. The user is thus assured that
such equipment will meet certain minimum requirements and that
one can expect a certain degree of reliability and performance.
6.2.4 Proprietary Specifications
Proprietary specifications call for materials, equipment or

products by trade name, model number and manufacturer. This type
of specification is easiest to write because of the commercially
available products and equipments set the standard of the quality
acceptable to the specification writer. One disadvantage of
proprietary specifications is that they may permit the substitution of
alternate products and equipment that may not be exactly the same.
Under the proprietary specification the designer is responsible for the
performance of the products and equipment.
6.2.5 Base-Bid Specifications
The establishment acceptable materials and equipment by

naming one or more manufacturers and fabricators is referred to as
base-bid specifications. The base-bid specification will usually permit
a bidder to substitute for the specified materials or equipment
providing this is acceptable to the architect or owner. Base-Bid
specifications provide a great degree of control over the quality of
the materials and equipment. The type of specification to be used is
difficult and time consuming task is the most important aspect of
preparing documents that guide the construction of the proposed
facility.
53
Food Service 6.3 BIDDING AND AWARDING CONTRACTS
Facilities Planning
In any project to be put out for bids, a standard set of
documents, including bid forms, forms for borides, insurance
requirements, instructions to bidders and legal considerations is
available. Most architects use the documents entitled "The general
conditions of the contract for the construction of buildings" prepared
by American institute of architects as a guide for preparing these
forms.
When bids are received the architects and other consultants

involved in the planning will review them and make
recommendations for the awarding of the contract for construction. If
the drawings, specifications and bidding documents are complete,
the lowest bidder will usually get the recommendation.
When construction contracts are signed, the contractor will

make detailed roughing in drawing for all utilities to be used in the
facility. These drawings are referred to as stop drawings and are
checked against the architect's mechanical and electrical drawings.
The actual drawings are approved before actual construction beings.
6.4 CONSTRUCTION
During the construction the architect and the consultant

check and evaluate the progress of the project. The completed
building is accepted only after the architects had made a final
inspection and is satisfied that all work has been completed as
specified. If the planning is haphazard then it usually results in a
facility that will be inadequate for efficient food service operations. It
is too late to think about the importance of good planning after
construction has been completed.
CHECK YOUR PROGRESS
1. The specifications are used for …………….. and for the

………….. by construction contractors.
2. The most detailed type of specifications is …………...
3. List out the five types of specifications.
6.5 LET US SUM UP
The preliminary plans generally include floor plans showing

the arrangement of equipments, aisles and functional area location.
The pictorial view of the selected areas is prepared to provide the
better grasp of the final design. There may be several changes made
before the plan is acceptable.
The specifications will expand on the characteristics of the

materials involved and the workmanship desired in installing them.
The specifications will completely describe the sink and establish
54
such details as type of stainless steel, construction of the joints,
degree of finish, type of supports and many other characteristics of Plans and Specifications
design.
There are several other specifications in written including:

Performance Specifications, Descriptive Specifications, Reference
Specifications, Proprietary Specifications, Base-Bid Specifications.
When bids are received the architects and other consultants

involved in the planning will review them and make
recommendations for the awarding of the contract for construction. If
the drawings, specifications and bidding documents are complete,
the lowest bidder will usually get the recommendation.
1. The specification will expand on the characteristics of the

materials involved and the workmanship desired in installing
them – Discuss.
2. Identify the components of good planning.
6.7 KEY WORDS
Bidding is an offer of setting a price one is willing to pay for

something.
Haphazard characterized by lack of order or planning.
1. What are the specifications are used for estimating costs?

2. How to preparation of final plans?
3. Define Cost estimates.
1. Estimating costs, preparation of bids.
2. Descriptive specifications.
3. (i) Performance specifications

(ii) Descriptive specifications,
(iii) Reference specifications,
(iv) Proprietary specifications,
(v) Base-bid specifications
55
Food Service 6.9 REFERENCES
Facilities Planning
2. Jose Ransely, Developing Hospitality Properties and Facilities,
British Library.
3. David M Stipaunk, Hospital Facility Management, S.K. Hajra -
4. Harold Koontz, Essentials of Management, Heinz Weihrich.
56
LESSON 7
PREPARATION OF PROSPECTUS
CONTENTS
7.1 Preparing the Prospectus
7.1.1 Importance
7.1.2 Occupation
7.1.3 Income level
7.1.4 Age
7.1.5 Sex
7.1.6 Education
7.1.7 Motivation
7.1.8 Spending Habits
7.2 Activities Related to Dining Out
7.3 Arrival Patterns
7.4 Miscellaneous Factors
7.5 Development of the Menu
7.6 Frequency of change
7.7 Types of Menu Offerings
7.8 Extent of Menu Offerings
7.8.1 Service
7.8.2 Types
7.8.3 Atmosphere
7.9 Operational Characteristics
7.10 Regulatory Considerations
7.11 Let Us Sum Up
7.13 Key Words
7.15 References

following:
 Preparing the Prospecuts

 Arrival Patterns
 Types of Menu Offerings
 Operational Characteristics and
 Regulatory Considerations.
Food Service 7.1 PREPARING THE PROSPECTUS
Facilities Planning
7.1.1 Importance
A carefully prepared prospectus defines what the owner

desires and expects in food service facility. The prospectus will
include management objectives as well as decisions that will affect
the operation of the food service facility, the various ideas relating to
marketing. The systematic approach to planning leads to a design
that meets the goals and objectives of the proposed facility.
The prospectus is the guide for planning. It is possible and

sometimes even desirable to change the information of decision as
planning proceeds. The suggested areas of information to be
included in the prospectus will be presented in the outline form. The
outline is primarily intended for commercial food service facilities and
it may be used for other types of operation.
7.1.2 Occupation
Identification of customer or user occupation is important to

many of the planning decisions that are to be made for other parts of
the prospectus. Development of the menu, portion sizes, method of
service, pricing and type of dinning atmosphere to be created are all
dependants upon adequate identifying of the potential customers.
The uses of food service facilities are:
 Business peoples including manufacturers and retails

 Clerical workers and office workers
 Craftsmen
 Homemakers
 Laborers
 Professionals
 Retired individuals
 Sales personnel
 Service workers
 Students.
Most planning projects will be designed to attract a particular

occupational group. There may be certain food service projects that
have to be designed for more than one occupational group.
7.1.3 Income Level
Information on annual income levels can also be obtained

from census and chamber of commerce reports and from periodicals
like sales and marketing management. If the income level is more
then there will be more eating out. Food service facilities designed
for high income level customers can obviously be more elaborate
and of higher quality.
Income data for the prospectus may be expressed as a

percentage of individuals or families who fall in given ranges or
58
groups. A group of income ranges are given below.
Under Rs.10,000 Rs. 35000 Preparation of
Rs.15000 - 20000 Rs.35000 - 40000 Prospectus
Rs.20000 - 25000 Rs.40000 - 45000
Rs.25000 - 30000 Above 50000
The food service facility to be developed in a particular

location has to be correlated to the income levels present.
7.1.4 Age
The age or age groups of potential customer and users is

needed for the development of the menu for a dinning atmosphere.
The type of food items to be placed on the menu, the portion sizes
and prices must be matched to the particular age groups to ensure
attraction and retention of customers.
Some of the age categories for the use of food service

planning are:
Under 5 27-39
06-12 40-52
13-19 53-63
20-26 Over 65
The age information can be expressed as percentages or

numbers of people in each age category.
7.1.5 Sex
The food service facility that is designed primarily for one sex
or the other will have a distinct character. For example, facilities
designed for a female clientele would be characterized by pleasant
atmosphere, large and comfortable rest rooms, unique decorations
and menus that feature specials, salads and sandwiches. Portion
sizes can be smaller also.
Facilities designed for males will be less formal and feature

different menu offerings in larger portion sizes. The design of food
facilities that cater to both sexes will necessarily blend these
characteristics.
7.1.6 Education
The educational level of the potential customers is identified

as an important facet in dining-out habits. Generally higher the
educational level the greater the frequency of dinning out. Education
also appears to be factor influencing the variety of menu items
desired and the willingness to try new or different foods.
7.1.7 Motivation
Knowledge of the motivation people have for dinning out can

aid panniers and managers to develop and operate a successful
food facility. Some of the motivating factors are: 59
Food Service  Change in routine (a favorite of housewife's)
Facilities Planning  Necessity due to time or distance limitations
 Convenience
 Business reasons
 Social, such as meeting or entertaining friends
 Social occasions, birthdays, anniversaries
 Adventure
 Entertainment and enjoyment
 To obtain special kinds of meals that are not usually
available to the home market
7.1.8 Spending Habits
The spending habits for dining are related to occupation, age,

income and other factors and are very difficult to measure
accurately. In general the amount of money spends on meals away
from home is increasing in all segments of the population. This is
especially true for the younger generation.
7.2 ACTIVITIES RELATED TO DINING OUT
Another important guide to the overall design of the food

facility is determining the activities of potential customers involved in
these activities that relate to dining out need to be considered. Many
of these activities reflect a particular location or area may not be
meaningful until a definite site for the food service facility is being
considered. The typical activities that can be related to dining out
are:
 Shopping
 Traveling or touring
 Attending conventions
 Visiting
 Business meetings
 Entertainment events (sports, shows, theatres)
 Organized group meetings
 Meetings of social groups.
Evaluation of these activities will determine the desirability of

designing special facilities such as banquet rooms, cocktail lounges
and meeting rooms for the proposed food service operation.
7.3 ARRIVAL PATTERNS
The size of dining tables, seating arrangements and serving

times are among the design considerations determined by arrival
patterns of potential customers. Arrival patterns will influence the
design of the facility from the standpoint of peak periods of
operation. Some of the groups are:
Singles Men Groups

Couples Women Groups
Families Mixed groups
60
Knowing the number of people to be fed per hour or per Preparation of
minute. Will pinpoint many of the design decisions needed to plan Prospectus
the food facility.
7.4 MISCELLANEOUS FACTORS
There are some other factors of customer which helps in

design process. The importance and need of those factors is
determined by the owner or food service consultant. Some of the
additional factors are:
 Ethnic background
 Food preferences or types of meal desired
 Eating habits
 Service preferences
 Marital status
 Mean of transportation
 Preferred meal periods for dining out
 Preferred days for dining out.
This information of the customer is used to develop the

remaining parts of the prospectus. The information is critical for
proper development of menu; type of service the atmosphere and
the operating characteristics of the food facility. The development of
these other factors is closely correlated with the characteristics of the
market to be served.
7.5 DEVELOPMENT OF THE MENU
The menu for the food facility should be developed carefully

because it is the foundation upon which the layout and other design
function are based. The menu serves as a source of information for
the various food items to be prepared and consequently the process
required for the preparation and it will determine the space and
equipment requirements for the facility. In addition the menu guides
the decisions that are made regarding the merchandising policy
developed for building and maintenance sales.
The development of the menu evolves from consideration of

the market, case of production and the layout required. These areas
are then used to arrive at the final decisions regarding the planning
of the total facility. The menu also has a bearing on the type of
personnel, their training and the supervision needed to produce the
various food items. The prospectus should not be considered
complete unless it includes a sample menu.
7.6 FREQUENCY OF CHANGE
The first decision to be made in developing the menu is to

determine the frequency of change. Considerable thoughts have to
be given to this decision because of its relationship to the remaining
phases of the planning process. Planning of a facility for affixed
menu is simpler than for a daily change menu. Daily change menus 61
are required for many type of menu characteristics desired. It is
Food Service possible to have an operation that has a fixed menu for one meal
Facilities Planning and changing menus for the other meal periods. Some of the
categories of frequency of change for menus are described as
follows.
1. Completely fixed menu: Many fast food and specially

operation are completely fixed menus. The only changes that
are made occur when a menu item is added or dropped for
popularity, profitability or production considerations.
2. Fixed Menu with seasonal changes: This variation of the

fixed menu is used to accommodate the availability of seasonal
food items. This is not usually a complete change of menu
items but primarily those items that have seasonal popularity.
3. Fixed menu with changing specials: This is also a

variation of the fixed menu. The special may be changed daily
and indicated clearly on the menu. This type of menu is used
when the simplicity of fixed menu is desired but considerations
of repeat business leads to changing special food items.
4. Complete daily changes: This type of change is best for an

operation that has number of food items on the menu and has
heavy repeat business. This concept may be used by seasonal
food service operation that is open for a limited period of time
during the year.
5. Cyclical daily changes: These types of menu changes are

used in operation catering to repent or captive customers are
exemplified by employee cafeterias, educational feeding
operation and institutional food services. The cycle is usually
from two to six weeks in length. Seasonal variations can also
be incorporated into this type of menu.
6. Daily changes with standard items: This is basically a

daily change or cyclical daily change concept with the addition
of some popular short order items. Steak and chops are
common standard items with this type of menu.
7.7 TYPE OF MENU OFFERINGS
Another consideration in developing the menu is to decide on

the type of menu offerings. The usual choices are a la carte items or
complete meals. Most individuals prefer a la cerate offering although
some prefer the complete meal. A happy medium is to have the
combination of a la cerate and complete meals.
7.8 EXTENT OF MENU OFFERINGS
In the food service market there is a place for all types, from
the very limited offerings of small operations to the extensive choice
available in deluxe table service operations. A limited menu is
desirable from many stand points, including simplified planning for
62 the facility and simplified production of the few items. The limited
menu will require less equipment and space in the facility and there Preparation of
is a drawback that it will not attract enough customer’s and make the Prospectus
operation profitable.
The extensiveness of the menu items can be modified

somewhat after the operation is opened and a better feel for the
customer's desires is obtained. It is better to avoid drastic changes in
the menu after the facility has been planned.
After deciding the extensive menu offerings should be for

each meal, the next step is to select the particular food items that will
appear on the menu. The following factors are considered in
selecting a particular food item.
(1) Popularity or sales appeals this area is very critical in

success of the operation. Some variety of foods is desirable
so that customers are not subjected to menu monotony and
fatigue.
(2) Profitability of the foods. This requires an analysis of the

foods that would yield the greatest net profit after food,
labour and other costs are considered. Profitability and
popularity are not necessarily found in the same foods and
the menu should reflect a balance between them. A menu
composed entirely of high profitable items would certainly
not be most popular.
(3) Method, ease and speed of production: Foods that are

easily processed require less time, labour and equipment.
Fully preprocessed and portioned food items represent one
way achieving the same result for foods that are difficult to
process.
(4) Sources of supply and variations in supply: A constant

source of supply is desirable for all food items that will
appear on the menu, but this may not always be possible
for decisions at this point of the planning process will
simplify later planning steps.
(5) Man power required to produce the food item:

considerations of skill, training recuired and the availability
of qualified personnel to prepare food items should be
evaluated. It makes little sense to put a food item on the
menu that cannot be produced with consistent high quality.
(6) Equipment requirements and usage. This analysis can be

done after the menu has been developed to see is full
equipment utilization has been achieved. Many food items
can be modified slightly to make better use of the
equipment.
(7) Portion size: Portion sizes are determined by the

appearance, cost, price and variety. Visual appearance of
the food item is the main consideration in determining 63
portion sizes. The portion sizes and the number of portion
Food Service to be prepared are needed before equipment capacity can
Facilities Planning be determined.
(8) Compatibility: Food colours, textures, aromas and visual

appeal are important factors in evaluating food items for
compatibility Food service operations offering complete
meals should be particularly careful to choose food items
that go well together.
(9) Pricing customers like to be given a sense of menu range

and value. It can be accomplished by adding a lower priced
item or two to the menu. It is also important to consider
pricing in relation to consumer spending patterns.
7.8.1 Service
The type and standards of service for the food facility are
potential customer and the menu offerings. The service has to be
compatible with these factors in order to create a unified design.
7.8.2 Types
There are two basic methods of service to consider for food

facilities and they are service units and self service units. Service
units provide waiters or waitresses or other personnel to serve the
food directly. The principal types of service units are table service,
counter service, booth service, tray service and room service. The
design and operational consider related to each type of service unit
are evaluated before a decision is made.
Counter service is situated to individuals who want a quick

meal with a minimum of fuss. Counter service operations require a
minimum space because the preparation and service of food is done
in the same area.
Booth service operations are usually preferred by teenagers,

young workers and travelers who want some privacy while eating.
Tray service units are used primarily in hospitals, for airline feeding
and for drive in operations. Room service is specially type of service
unit for hotels, motels, motor inns and resorts.
The principal types of self service units are cafeteria service

buffet service, and vending units. Cafeteria service units are suited
to busy slippers, business people and families.
Buffet service can be combined with other types of service

units or used by itself. Buffet service is very suitable for special days
or occasions where the normal growth is anticipated.
Take out service has become very popular with low priced,
limited menu operations. Vending units are ideal for between meal
snacks or for limited time meals in schools, institutions and industrial
plants.
64
The type of service to be provided will determine the type of Preparation of
serving equipment and serving personnel required. The planner has Prospectus
to evaluate the flow of service personnel in the serving or dining
areas. Other aspects related to service are the standard of service in
the food facility. The selection of table coverings, dishware,
glassware and flatware should reflect the menu and the method of
service.
7.8.3 Atmosphere
Another important fact of preparing the prospectus is to

identify the desired dining atmosphere for the food facility. The Menu
offerings and the method of service of the potential customers will
give the clues to the type of atmosphere to be exportations provision
of dining area that is quiet, colorful and attractively decorated will
complete the bill. Some of the common terms characterize the
atmosphere are formal, informal; quiet, rushed, noisy cheerful,
pleasant, relaxing, colourful, festive and intimate.
The special feature such as location, unique building shape

or them is to be emphasized. Exterior design is important in
conveying a quick impression of atmosphere to the customer. The
atmosphere planned for a hotel dining room is more lavish than for
other types of operations.
7.9 OPERATIONAL CHARACTERISTICS
Most of the operational characteristics are and determined by

the consultant and are based on experience and knowledge of
successful methods of operation. Among there are some of the
information required for completing the prospectus are as follows:
 Ownership
 Legal Organization
 Days and hours of operation
 Procedures for purchasing production, service, ware
washing, waste maintenance and cleaning.
 Control methods for costs, purchasing, receiving, and
storage, issuing portions, cash, payroll and accurate.
 Personnel methods for costs, purchasing receiving, and
storage, issuing portions, cash, payroll and security.
 Personnel requirements and policies
 Accounting practices
 Special function for training supervision and management
 Employee and guest facilities.
7.10 REGULATORY CONSIDERATIONS
The regulatory considerations are also included in this part of

the prospectus because many of them have a direct bearing on how
the facility is to be designed and operated. Examples of that have to
be checked that might influence the proposed project given below:
65
Food Service (1) Zoning ordinances: Most zoning ordinances will dictate
Facilities Planning the locations where commercial food service facilities
may be built and operated within a community. Zoning
ordinances may control such items as parking
requirements, yard requirements, minimum building size,
building height and limitations on the use of sings.
(2) Building codes: These codes cover every aspect of

construction and specify in detail the design strength and
types of construction materials allowable. Planners must
be knowledgeable of building code requirements prior to
planning a facility in order to avoid costly changes that
may needed to satisfy the codes.
(3) Sanitary codes: The state and the local sanitary codes
related to food safety and hygiene and influence the
planning and the operation of a food service facility.
Typical areas covered by sanitary codes includes:
 Room finish schedules

 Location, number and type of plumbing
fixtures
 Hand washing facilities
 Specifications related to hot water supply
 Type and location of refuse disposal and
storage equipment
 Type of lighting and illumination
 Ventilation equipment to be used in
conjunction with cooking, frying and dish
washing equipment
 Type, make, model and size of food service
equipment
 Method of hot, dry and cold food storage and
 The nature, scope and mode of operation of
the facility.
(4) Lease restrictions: The food service projects involving

the leasing of building space such as in shopping centers
or in office buildings, house of operation and other
operating procedures may be specified and have to be
considered prior to developing the prospectus.
(5) Other regulatory areas include (a) labour laws (b)

licensing requirements (c) OSHA requirements for
handicapped individuals.
Some of these items will directly affect the design and layout
of the facility while other items apply primarily to the operating
procedures. It is desirable to evaluate both areas carefully because
of their relationship to the success of the proposed facility.
66
CHECK YOUR PROGRESS Preparation of
Prospectus
1. What is the necessity of the development of menu?

2. What is Prospectus?
3. There are two basic methods of service to consider for food
facilities, they are ………………… and ……………….
7.11 LET US SUM UP
The prospectus is the guide to planning it is possible and

sometimes even desirable to change the information of decision as
planning proceeds. The suggested areas of information to be
included in the prospectus will be presented in the outline form.
The development of the menu evolves from consideration of

the market, case of production and the layout required. These areas
are then used to arrive at the final decisions regarding the planning
of the total facility. The menu also has a bearing on the type of
personnel, their training and the supervision needed to produce the
various food items.
Planning of a facility for affixed menu is simpler than for a

daily change menu. Daily change menus are required for many type
of menu characteristics desired. It is possible to have an operation
that has a fixed menu for one meal and changing menus for the
other meal periods.
The extensiveness of the menu items can be modified

somewhat after the operation is opened and a better feel for the
customer's desires is obtained. It is better to avoid drastic changes in
the menu after the facility has been planned.
1. How do you develop the menu? Discuss.

2. List out the various types of menu offering.
3. Suggest any new idea for preparing the prospectus.
7.13 KEY WORDS
Illumination Lighting
Compatibility Enlighten menu
Fatigue Tiredness, Weariness
Monotony Sameness, Continuity
Craftsmen A person who practices or is highly skilled in a craft
Motivation Inspiration encouragement
67
Food Service 7.14 QUESTIONS FOR DISCUSSION
Facilities Planning
1. What are the regulatory considerations?
2. What are the operational characteristics are determined?
3. What are the factors that are considered in selecting a particular

food item?
4. List out the categories of frequency of change for the menus.
5. What do you mean by miscellaneous factors?
6. Explain the various steps involved in preparing prospectus.
1. The menu for the food facility should be developed carefully

because it is the foundation upon which the layout and other
design function are based.
2. A carefully prepared prospectus defines what the owner desires

and expects in food service facility. The prospectus will include
management objectives as well as decisions that wil affect the
operation of the food service facility.
3. Service units, Self service units.
7.15 REFERENCES
1. Donald. D. Wolf, The Art of Culinary Cooking, Lexicon

Publication.
2. Ronald Kinton, Victor Ceserani, David Foskett, The Theory of
Catering, Hodder Arnold H&S
68
LESSON 8
FEASIBILITY STUDY
CONTENTS
8.1 The Feasibility Study
8.2 The Market Survey
8.3 Site Analysis
8.4 Availability of Local Labour
8.5 Cost Estimates
8.6 Land and Construction Cost Estimates
8.7 Cost of Furnishing and Equipment
8.8 Operating Equipment
8.9 Planning Cost
8.10 Operating Capital
8.11 Projected Income
8.11.1 Estimating Food Sales
8.11.2 Estimating Alcoholic Beverage Sales
8.11.3 Projected Expenses
8.11.4 Estimated Food Beverage Cost
8.11.5 Estimating Controllable Expenses
8.12 Projected Earnings
8.13 Let Us Sum Up
8.15 Key Words
8.17 References

following:
 Market Survey
 Availability of Local Labour
 Operating Equipments
 Cost of Furnishing and Equipment and
 Projected Income.
8.1 THE FEASIBILITY STUDY
The feasibility study is essential and also analysis of the

market information, the operation concepts and the financial
considerations that have been gathered for a particular project. The
objective of the feasibility study is to determine whether the
proposed project should be undertaken or abandoned.
The feasibility study identified hidden factors or hazards that

may not be readily seen by a cursory description of the project.
Food Service Some reasons for abandoning a food service project include
Facilities Planning inadequate financing, anticipated changes in the market, inadequate
profit for conducting the feasibility study because of the diversity of
the types of food service projects that may be undertaken. Each
feasibility study will reflect an analysis of the special requirements of
the project under consideration. This indicates that some aspects of
the feasibility study may involve greater research efforts in order to
adequately guide the decisions that are to be made.
Each feasibility study has to be tailored to fit the project in

hand. These items serves as a guide and in real practice the study is
adapted to the requirements of the projects under consideration.
Many architects, food service consultants and accounting firms
provide this service.
8.2 THE MARKET SURVEY
The market survey for the feasibility study may be

accomplished for two different situations. In the first situation a
particular site may be taken under consideration for the proposed
facility. In the second situation, only those areas of market
information that relate directly to the demand for food service
operations need to be considered. The types of marketing data that
may be gathered for a particular project are outlined below.
i) Potential Customers
 Location
 Number
 Types
 Income Levels
 Ages
 Sex
 Occupations
 Spending habits
ii) Historical Data

 Attractions
 Types of infrastructure
iii) Growth Characteristics

 Population
 Bank deposit
 Telephones
 Utility connections
 Building permits
 Transportation
 Labour force
 Government units
 Taxes
 Recreation
iv) Competition
70  Number and type of food service facilities
 Number of seats Feasibility Study
 Check averages
 Turnover rates
 Sales volume
 Quality of facilities
 Type of service
v) Sales Generators
 Conventions
 Size
 Types
 Facilities
 Lodging facilities
 Office buildings
 Residential developments
 Homes
 Apartments
 Shopping areas
 Educational Institutions
 Recreations facilities.
8.3 SITE ANALYSIS
In the case where a particular site is to be evaluated for the

proposed food facility, considerable additional information is
gathered and correlated with the market data. Because of the great
variations and types of food service facilities, the site analysis has to
be done specially for the type of operation proposed. A site which
may be ideal for a table service operation may be very poor for other
types of facilities. Chain operations have considerable background
information on their customers and will try to find locations where
they will attract the same type of customers.
There are some points to be considered on site analysis and

they are as follows:
 Zoning
 Areas economics
 Competition
 Physical characteristics
 Land costs
 Availability of utilities
 Street pattern
 Positional characteristics
 Traffic information
 Visibility
 Service.
8.4 AVAILABILITY OF LOCAL LABOUR
To the success of the facility is the availability of

management talent that will be required to operate the facility. The 71
experienced market and site analysis in addition to collecting and
Food Service analyzing the facts and figures will personally tour the area within a
Facilities Planning reasonable radius of the site. The market data and site analysis
enables the analyst to advise the owner or investor in the following
areas:
 Seating capacity
 Most desirable type of service unit
 Expected seat turnover by days of the week and by months
of the year
 Expected check average for each meal period
 Expected alcoholic beverage sales if a bar are to be included
in the food facility.
8.5 COST ESTIMATES
After completion of the market study and selection of a site

for the proposed facility, the financial aspects of the feasibility study
are considered. Two important areas, one is preliminary estimates
must be made of the costs of land, building, equipment, furnishings
and the amount of working capital needed. The second area deals
with the projected income and expenses of the food facility. Both the
areas are of concern to the owner or investor because they indicate
how soon one can expect to get an investment back and how much
profit might be made. If the preliminary cost and profit estimates are
not very encouraging the owner should either modify the basic
scheme of the project or abandon it completely.
8.6 LAND AND CONSTRUCTION COST ESTIMATES
The land for the proposed facility can be obtained from

realtors or by a real estate appraisal. The site development costs for
excavating, removing rocks and grading for the architect estimates
driveways and parking areas. Another method of obtaining
preliminary cost estimates is to analyze cost of similar types of food
service facilities that have recently been built. Most operators will
willingly give out the costs they have incurred in building their facility.
8.7 COST OF FURNISHING AND EQUIPMENT
Cost estimates for furnishing and equipping the facility are

determined by the interior designer and the food service consultant.
These are estimates for equipment and furnishings in the kitchen,
dining and public areas and do not include building equipment, such
as heating and ventilating equipment.
8.8 OPERATING EQUIPMENT
Operating equipment includes chinaware, glassware,

Silverware, uniforms. The cost estimate for operating equipment is
generally based on the starting inventories required for each items.
72
8.9 PLANNING COSTS Feasibility Study
Planning fees for members of the planning team can be

estimated at 7-10% of the total construction costs, including
equipment and furnishings. Land costs are not included when
determining this estimate. All these various cost estimates are added
together to develop a figure for the total amount of money needed to
build and equip the facility.
8.10 OPERATING CAPITAL
Operating capital refers to the money required to finance the

food service operation after it opens until some inflow of cash
begins. The money is needed for house funds, payment for supplies,
payroll expenses and for other current bills as they become due.
Operating capital requirements may be broken down into the
following categories:
(1) Cash on hand: This is for the cashiers who will handle the
cash transitions. The total supplies and the total amount on
deposit will vary with the owners desire to maintain a good
financial position in meeting current obligations. Some funds
for emergency expenditures should also be included.
(2) Cash on deposit: It includes funds to meet current payrolls,

utility bills, materials and supplies. The total amount on
deposit will vary with the owners desire to maintain a good
financial position in meeting current obligations. Some funds
for emergency expenditures should also be included.
(3) Accounts receivable: The increasing popularity of credit

cards requires some money to handle the accounts
receivable. This may be determined by estimating the volume
of charge business anticipated and the time required to
handle the accounts. Those operators who will handle cash
sales only do not have to consider this category.
(4) Inventories: This is to handle the beginning inventories of

food, beverages and supplies. The food inventory may be
estimated at 1% of the total annual food sales expect. I and
for beverage it is around 5%. Inventories of supplies vary with
the type of operation.
(5) Prepaid expenses: Prepaid expenses include such items as

insurance premiums, licenses and interest payments. These
may be estimated by containing the appropriate agencies
involved.
8.11 PROJECTED INCOME
The next step involved in the feasibility analysis is to

determine the projected earnings for the food facility. Usually
estimates for each of the first three years of operation are made.
This result in a more realistic estimate. 73
Food Service 8.11.1 Estimating Food Sales
Facilities Planning
Estimates of food sales for a proposed food service facility
are usually based on the market research data and are made for
each meal period. Typical communications based on the number of
seats, seat turnover and check average for daily sales are made and
projected for the estimated annual sales.
The estimates of seat turnover are critical to accurate

projections of income. Seat turnover will vary with the type of
operation, the menu, the method of service, type of clientele and
type of location should be estimated by an evaluation of all these
factors. Seat turnover will vary probably for each meal period and in
some instances may vary for different days of the week.
8.11.2 Estimating Alcoholic Beverage Sales
Sales of alcoholic beverages where applicable may be

estimated as a ration of total food and beverage sales. In most table
service operations an estimate of 25% of the total sales is used for
alcoholic beverages. An alternative method of estimating alcoholic
beverage sales is to forecast the number of customers who might
order drinks or wine for each meal period.
8.11.3 Projected Expenses
Many percentage figures are reported in publications for

various categories of expenses that should only be used as a guide.
The expenses can vary widely from operation to operation.
8.11.4 Estimated Food and Beverage Costs
Expected food costs may be determined by using the same

popularity forecasts that were used to estimate check averages. This
requires that each menu item be evaluated using standard recipes
and identifying costs for each ingredient. When each menu item is
coasted, the popularity forecasts are used to determine the expected
food cost. Food cost percentage is then computed by dividing the
annual food cost estimate by the sales expected for the year.
Alcoholic beverage costs may be estimated in a similar

manner and expressed as a percentage of total projected sales.
Estimated food and beverage costs may be compared to industry
averages for the type of food service facility being planned.
8.11.5 Estimating Controllable Expenses
The most critical item under controllable expenses is payroll

and accurate estimates are very important. The best estimates of
payroll expense are obtained by taking the time to prepare staffing
schedule for the proposed facility. Current wage rates for each job
classification are used to obtain total payroll expense expected for
the year.
74
Some items of controllable expenses are estimated by using Feasibility Study
industry averages. If industry averages are not though to be
applicable for a particular project, then estimates based on the
proposed operational characteristics have to be developed.
Other items of controllable expenses are estimated by

evaluating the pertinent factors involved. Some types of project may
anticipate according to that. In many instances it is desirable to
obtain projected energy usage from engineering data to determine
accurate estimates of the costs of utilities.
8.12 PROJECTED EARNINGS
The estimated income and expenses are used to project the

potential earnings for the food service facility. The rate of return on
the investment can be calculated and will be the determining factor
in deciding whether or not the project is justified as conceived. If the
proposed facility is deemed feasible, commissioning the planners
continues the planning process. The planners are given the general
requirements for the project and determined by the feasibility study.
These requirements include total building size, number of seats and
dining room square footage, number of parking spaces, bar space
and any other space needed for special functions.
CHECK YOUR PROGRESS
1. The objective of the feasibility study is to determine whether the

proposed project should be ……………………..
2. Each feasibility study has to be …………… to fit the project in
hand.
3. How do you estimate food sales?
8.13 LET US SUM UP
The feasibility study identified hidden factors or hazards that

may not be readily seen by a cursory description of the project.
Some reasons for abandoning a food service project include
inadequate financing, anticipated changes in the market, inadequate
profit for conducting the feasibility study because of the diversity of
the types of food service projects that may be undertaken.
Operating capital refers to the money required to finance the

food service operation after it opens until some inflow of cash
begins. The money is needed for house funds, payment for supplies,
payroll expenses and for other current bills as they become due.
The planners are given the general requirements for the

project and determined by the feasibility study. These requirements
include total building size, number of seats and dining room square
footage, number of parking spaces, bar space and any other space
needed for special functions.
75
Facilities Planning
1. Give your suggestions for doing market survey and site analysis.
2. Estimate the cost for land and constructions.
3. Prepate sales estimates for food and beverages.
8.15 KEY WORDS
Belogna Ham loaf

Grilled Cheese Ham steak
Fried Potatoes Pancakes
Visibility It is the measure of distance at which an object or
light can be clearly discerned.
Inventories Pancake list is the goods and materials held
available in stock by a business.
1. What is the Operating Capital Requirements?

2. Explain the Projected Income.
3. What do you mean by Market Survey?
4. What are the points to be considered on Site Analysis?
5. Explain about the Feasibility Study.
6. Define Cost Estimates.
7. What is Operating Capital?
1. Undertaken or abandoned.
2. Tailored.
3. It is usually based on the market research data and is made for
each meal period. Typical communications based on number of
seats, seat turnover and check average for daily sales are made
and projected for the estimated annual sales.
8.17 REFERENCES
1. Costas Katsigris, Chris Thomas, Design and Equipment for

Restaurants and Food Service: A Management View, Wiley.
3. Joseph Ransely, Developing Hospitality Properties & Facilities,
British Library.
76
LESSON 9
FUNCTIONAL PLANNING
CONTENTS
9.1 Functions
9.2 Concepts of Flow
9.3 Functional Requirement
9.3.1 Receivings
9.3.2 Storage
9.3.3 Dry Storage
9.3.4 Freeze Storage
9.3.5 Refrigerated Storage
9.3.6 Storage of Non-Food Items
9.3.7 Preparation
9.3.8 Meat Preparation
9.3.9 Vegetable Preparation
9.3.10 Salad Preparation
9.3.11 Sandwich Preparation
9.3.12 Cooking
9.3.13 Baking
9.3.14 Serving
9.3.15 Dishwashing
9.3.16 Pot and Pan Washing
9.3.17 Waste Disposal
9.3.18 Other Requirements
9.4 Let Us Sum Up
9.6 Key Words
9.8 References

following:
 Functional Requirement
 Storage of Non-Food Items
 Vegetable Preparation
 Cooking and
 Baking.
9.1 FUNCTIONS
The main concept of planning deal with function. General

functions common top most food service operations include
receiving, storage, preparation, production service, ware washing
and waste disposal. Other functions that are performed but are not
Food Service easily related to materials or products include accounting,
Facilities Planning purchasing, management and communication. The first step in
functional planning is to visualize all the necessary functions to be
performed in the proposed food service facility.
Each function consists of a number of tasks. These tasks

vary from one facility to another depending upon the method of
operation desired by the owner or manager. The method of
performing the takes also depends on the type and form of materials
involved, the kind of equipment to be used, the quality of finished
products and the skills of the persons involved.
9.2 CONCEPTS OF FLOW
The identification and visualization of the functions and their

associated tasks makes it easier to discuss the concepts of flow.
Flow is identified as the movement of materials, workers, guests,
equipments, forms or any other element involved in the operation of
the food facility. The most important concept of flow as related to
planning is to minimize the amount of movement required for
efficient operation.
There are many aids that can be used to plan the facility so
that flow is minimized. The flow diagram is developed by showing
the flow of materials between the various functions that relate to a
particular project. Flow diagram shows the flow of primary materials
only. The ultimately be performed. The flow diagram does not have
to be developed at this stage of the planning process, but may be
done later when specific aspects of flow will be considered.
9.3 FUNCTIONAL REQUIREMENTS
Another reason for identifying the functions and tasks is to

develop the various physical requirements needed to perform them.
The basic requirements considered are equipment and space. For
each function or task the planner will determine the type of
equipment to be used and this in turn leads to the development of
space requirements. The capacity of the equipment is not usually
determined at this because a careful analysis of the menu and
scheduling are required.
In the development of equipment and space requirements the

planner has to decide how each of the tasks for a particular function
is to be performed in terms of the materials components of the
cooking function. Some of the variations of the materials that may be
used in making the stew are:
 Entirely from fresh raw ingredients, both meat and vegetables

 Partially fresh vegetables and partially canned
 Partially fresh vegetables and partially frozen vegetables
 All canned vegetables and fresh meat
 Fully processed canned stew
 Fully processed frozen stew.
80
The planner will evaluate the menu items to be produced and Functional Planning
make the decisions regarding the type of production equipment to
use. The same concept is used for all the other function and tasks
required to operate the facility.
The more identification of the functions and tasks alerts the

planner to the fact that some in of space will be needed. The planner
does not necessarily need to determine the final square footage of
space, but does consider whether a particular tasks requires floor
space, work space and / or storage space. The planning of the
operational methods are the key to the functional planning of the
facility.
9.3.1 Receivings
The receiving function is similar for most food service

operations. The receiving of incoming foods, beverages and supplies
is planned according to the types and volumes of different materials
handled. The frequencies of deliveries and the type of delivery
service are considered for each type of materials to be received. In
large facilities materials handling system may be utilized to simplify
the movement of materials into and out of the receiving area.
Planning of the materials handling system for the receiving

area is only a part of the total system for the entire facility and the
planner should consider all the various components of the handling
system before making a final decision. Some planners uses a
system which uses several type of equipments, each selected for its
characteristics for handling certain type of materials. The availability
of a wide variety of materials handling equipment enables the
designer to develop many different systems.
Some temporary storage in the way of floor space and table

space is required to check deliveries for quantity and quality. The
space is designed on the basis of the larger amounts of frequently
delivered materials. Additional space is planned for scales, storage
of skids and had trucks and for other necessary equipment for the
receiving function.
Consideration of waste disposal is also a factor in planning

for the receiving function, since some partial trimming and cleaning
of materials may be needed before they are placed in the storage.
Disposal of boxes, cartons and other packaging materials removed
during the receiving function is also involved.
9.3.2 Storage
Planning for the storage function in food facilities includes dry

storage, refrigerated storage, freezer storage, beverage storage and
storage for non food supplies.
9.3.3 Dry Storage
The dry storage function like other storage function is 81

necessary for the on-site storage of frequently used materials.
Food Service Storage requirements will depend upon the type of materials,
Facilities Planning frequency of delivery and the volume of each delivery.
Dry storage area for food items are planned to maintain

temperatures between 50 and 70 F (10 and 21.1). The desired
relative humidity is approximately 50%. For this reason the heat-
generating equipment such as motors and compressors should not
be planned for this area. Pipes carrying steam or hot water are
insulated to minimize heat gain of storage area. Protection against
moisture from sweating cold water or refrigerant lines is also
important. Planning for protection of the food suffs from insects and
vermin is required for sanitary reasons.
Some space for storage of frequently used dry items can be

provided in various work areas of the facility. The concept will reduce
the amount of movement required to obtain the materials.
9.3.4 Refrigerated Storage
Refrigerated storage areas maintaining temperatures of 35 -

40 F (1.7 - 4.4 C) are required for fresh meats, vegetables and fruits,
diary products, beverages and carry over foods. Many planners are
specifying smaller but more numerous reach in refrigerators,
strategically located throughout the facility instead of one large walk
in storage. A combination of walk in and reach in refrigerators seems
to be a good design for many types of food service facilities.
The design of walk in refrigerated area is similar to the dry

storage areas accepts for the refrigeration system and required to
maintain the desired temperature. The size and type of food service
operation and the frequency and volume of deliveries will determine
whether a walk in refrigerated space is needed. It is thought that a
walk in refrigerators are generally designed operations serving over
300 - 400 meals per day. Reach in refrigerators are generally
designed to store for a shorter period of time and are ideal for
smaller operations.
The increased use of frozen foods necessitates planning

refrigerated space for thawing purposes. Requirements wills depend
on the volume and type of frozen food to be used in the operation.
Thawing space is generally designed to handle one day’s
production. Refrigerated space for finished items including salads,
desserts and appetizers is planned accordingly.
9.3.5 Freeze Storage
Temperatures of 10 to 20 F (-23.3 to -28.9 C) are needed to

safely store. Designers are aware of the increased use of frozen
foods that are partially or fully preprocessed and plan accordingly.
Some operations have gone almost exclusively for frozen foods.
Freezers may be walk in or reach in and requirements are dictated
by several factors including the availability of seasonal items. The
possibility of buying seasonal items in large volume should be
82
evaluated before the design of freezer storage is finalized.
9.3.6 Storage of Non-Food Items Functional Planning
The design of storage areas for Non food items like dishes,
glasses, flatware, utensils, paper goods, linen, cleaning supplies and
furniture can take many different forms. They may be stored in
rooms in shelves, in cabinets or on specially designed racks. In
smaller operations, some items may be incorporated in the dry food
storage area, but separate areas are best for larger operations. All
chemicals, soaps, sanitizing compounds and other cleaning supplies
should be stored separately because of their danger to foods.
Separate desirable for cleaning equipment such as brooms, mops,
pails scrubbers and polishers. In process storage of items may be
accomplished by special equipment such as self leveling dispensers.
The self leveling dispensers are a very satisfactory method of
providing storage for dishes.
9.3.7 Preparation
The preparation functions for a food service facility are meat

preparation, vegetable preparation, salad preparation and sandwich
preparation. Specially restaurants may have different or additional
functions depending on their menu items. The various preparation
functions are sometimes combined and performed in one area.
Smaller facilities frequently combine the salad and sandwich
preparation area and sometimes vegetable and salad preparation
area are also common.
9.3.8 Meat Preparation
The meat preparation function consists of cutting, chopping,

grinding and portioning of meat and meat products to ready them for
further processing. The meat preparation function has changed over
years with the advent and increased use of proportioned meats.
Some operations have minimum meat preparation area where the
only task is to open the packages and planning of meats. Larger
operation still requires a full meat preparation function. The planning
for the meat preparation function varies with the amount of
preparation that will be done on the food service premises.
9.3.9 Vegetable Preparation
The vegetable preparation function involved preparing

primarily fresh vegetables for cooking and salad production. Some of
the tasks associated with fresh vegetable preparation are trimming,
peeling, washing, cutting and chopping. The vegetable preparation
function can be minimized by utilizing various types of preprocessed
vegetables. Canned and frozen items are generally used as
alternative to fresh vegetables.
The operation choosing to use fresh vegetables will require

the use of choppers, slice’s, peelers and similar equipment. Type
and capacity will be designed to handle the volume of vegetables to
be prepared. Holding refrigerators are used if the preparation is done
a day prior to usage. Waste disposal is another aspect in planning 83
Food Service for the vegetable preparation function. Mechanical waste disposal
Facilities Planning units are commonly used.
9.3.10 Salad Preparation
The function of salad preparation is that of combining and

assembling ingredients prepared in the vegetable preparation area
or obtained form fruit and vegetable areas into finished salads.
Various quantities of meat, fish and diary products are used in
certain salads. The preparation of some appetizer items may also be
a part of the functional area.
Design for the salad preparation function will depend upon

the type and volume of salads to be produced. Sometimes salad and
vegetable preparation function are combined in smaller facilities.
Another alternative method is combining of salad and the sandwich
preparation function. Large food service operations those serving
banquets will design for a separate mass production salad area.
The perish ability of salads necessitates planning of

refrigerated holding facilities. Mobile refrigerated carts are selected
by some designers as a method of transporting and holding the
finished salads. Pass through refrigerators are frequently specified
for cafeteria operations.
9.3.11 Sandwich Preparation
The work area for sandwich preparation is planned to provide

ample space for the ingredients used in the sandwiches, hand tools
and a normal flow of work. Custom designed sandwich preparation
areas are used for operations handling a large volume of
sandwiches. In some cases the sandwich preparation area may be
in a part of the serving area as in cafeteria or counter service
operations.
9.3.12 Cooking
The hear for all food service facilities is the main cooking
function and special care for planning is required. In addition to
cooking all meat and vegetable items the cooking area serves as a
hub between the production and service functions.
The design of cooking areas varies from very limited facilities

as in fast food and limited menu operations, to the very extensive
facilities of luxury table service operations or in large institutional
services. The design of cooking area is closely correlated with the
various menu items to be processed. Considerations of cooked-to
order and batch cooking are important in arriving at the final design.
9.3.13 Baking
Many of the food service operations will not involve in the

production of full line baked goods. Many of large institutional
84
operations in universities and hospitals confine their baking function
to cakes, cookies and pastries and other items being obtained from
bakers. Some operations will not have their own baking but will use Functional Planning
the basic mies which will simplify the tasks of baking function. Full
bakeries are occasionally planned for commissaries or central
kitchen that supplies several outlets. It is planned to handle the
conventional tasks of formulation, scaling, mixing, handling and
makeup.
Many of the prepared its can be processed in the main

cooking area, eliminating the need for a separate baking area
completely. A study of the quality and availability of these made. An
economic analysis of the cost of full baking on the premises versus
the cause of pre prepared baked goods may also influence the
design of the baking system.
9.3.14 Serving
The different ways of performing the service function results

in the variety of serving facilities that may be planned. Basic table
service operations require pick-up areas immediately adjacent to the
cooking items like rolls; bread, butter and water are stored at waiter
or waitress station location in dining areas.
Serving line facilities are planned for cafeterias, employee

feeding and school or university feeding operations. Several
configurations of serving lines can be used, depending on the total
number of people to be served and the time allowed for serving.
Straight-line configurations are the most basic and are characterized
by easy access and well flow. The major problem with the straight
line configuration is its limited serving line.
Variations of the straight line include the U-shaped counter

and the-herring-bone design. These configurations give more linear
space and increase serving line capacity. The shopping center or
scramble serving line system is characterized by an open square
configuration of counters at the perimeters that allow traffic to flow
freely in the center. Total serving capacity of the shopping center or
scramble system is much greater than that of the served.
9.3.15 Dishwashing
The dishwashing function is usually performed in a separate

room or area that has to be well ventilated and illuminated.
Acoustical tile noise absorbing materials are used to aid in lowering
the high noise levels associated with this function. Modern
dishwashing machines can be obtained to handle any volume of
dinnerware.
Glass washing, which used to be a major problem in food

facilities is now better accomplished thought the control of washing,
rinsing and water additives. In many cases it is possible to wash
glasses satisfactorily if they are washed shortly after the water has
been changed. Other operators may prefer to have a separate glass
washer.
85
Food Service Large hotel foodservice operations find it desirable to provide
Facilities Planning a separate silver room where silverware can be cleaned and
burnished. The separate silver room provides a better means of
control over the expensive silverware.
The design of the dishwashing area is dependent upon the

total volume of dinnerware to be washed and the time required
accomplishing the washing. Some operation may prefer to carry a
large dinnerware inventory in order to spread the washing over a
long period of time. This usually occurs between the meal periods.
Others may decide to carry minimum dinnerware inventory and must
therefore wash the items as soon as they are soiled so they can be
returned to service immediately. Regarding of the system to used,
the designer will provide methods of sorting, soaking, washing, and
drying of the various dinnerware items. Appropriate handling and
storage methods are also devised for both soiled and cleaned
dinnerware.
9.3.16 Pot and Pan Washing
The pot and pan washing function is also preferably done in a

separate area instead of combining it with other areas as some small
operations may be included to do. The basic pot and pan washing
function can be handled with a three compartment sink and sufficient
space for storing the soiled utensil.
9.3.17 Waste Disposal
Every food service operation has different requirements for

waste disposal and many factors should be evaluate before
designing a system to handle this function amount of waste
generated, type of waste (paper, plastic, garbage, cans etc.,) cost of
hauling and dumping, frequency of pickups, and stricter air and
water pollution laws. Some of the waste disposal systems that may
be used or described as follows.
(1) Compaction: The use of compactors is usually

considered where large volumes of disposables are to be
handled. Compactors quickly reduce the volume of waste
so that it can easily be handled in smaller units. The
weight of the compacted waste should preferably be less
than 50 Ib (22.7 kg) for convenience in handling.
(2) Incineration: Incinerators can be used to some

advantage if the cost of equipment needed to comply with
local codes is not prohibitive. Pollution ordinances should
be checked for requirements.
(3) Grinding: Garbage grinding is generally allowed in areas

with municipal sewage systems. Some communities may
not allow garbage grinding if they experience problems
with non bridgeable materials such as completely plastic
or plastic coated materials.
86
(4) Pulping: Waste pulping creates a liquefied waste by Functional Planning
using heavy duty rotary girders with a recirculation water
system. The liquefied waste is then processed through
water extractor where it is reduced to a semi dry pulp and
then stored in bins. The semi dry materials have a little
odour and are trucked away periodically. Metal or glass
cannot be handled by a waste pulping system and
therefore these materials have to be disposed of
separately.
9.3.18 Other Requirements
The functional areas can be easily related to space and

equipment requirements because of their identification with the how
of materials. Other functional area that should be considered may
not necessarily involve material flow, but are important from the
stand point of total planning. These areas include facilities for guests
and employees and special areas such as equipment rooms and
maintenance rooms.
The functional planning for a food facility is completed when

all the functions and their related tasks have been identified and
provisions for efficiently performing them have been outlined. The
remaining steps of the planning process will be easier if the
functional planning has been correctly and thoroughly accomplished.
CHECK YOUR PROGRESS
1. How does the concept of flow is identified?

2. The basic functional requirements considered for the food
service facility are ………………. and ………………..
3. Refrigerated storage areas maintaining temperatures of
………………………
9.4 LET US SUM UP
The main concept of planning deal with function. General

functions common top most food service operations include
receiving, storage, preparation, production service, ware washing
and waste disposal. Flow is identified as the movement of materials,
workers, guests, equipments, forms or any other element involved in
the operation of the food facility.
The functional areas can be easily related to space and

equipment requirements because of their identification with the how
of materials.
1. Do the chart work for storage temperature for Dry storage,

Refrigerated storage and Freeze storage.
87
Food Service 2. List out the points to be kept in mind before Vegetable
Facilities Planning preparation, Salad Preparation, and Sandwich preparation.
9.6 KEY WORDS
Pot Washing It is the process of cleaning low to heavily bake

on items of restaurant kitchen food equipment.
Strategically A plan of action designed to achieve a
particular goal.
Appetizers Finger foods, Cocktail.
Sanitizing To free from grimes, dirt etc, by cleaning or
sterilizing.
Cookies A small cake made from stiff sweet dough
rolled & sliced
Configuration Composition, cast, figure.
1. List out the ingredients used to make a Stew.

2. Give a brief about dry storage, refrigerated storage and freeze
storage.
3. Write short notes on storage of non food items.
4. Describe about the preparation of meat, vegetable, salad and
sandwich.
5. Explain about pot washing and pan washing.
6. Highlight the four waste disposable system.
1. Flow is defined as the movement of materials, workers, guests,

equipments, forms or any other element involved in the operation
of the food facility.
2. Equipment and space.
3. 35 – 40 F.
9.8 REFERENCES

Restaurants and Foodservice: A Management View, Wiley.
British Library.
88
LESSON 10
PLANNING THE ATMOSPHERE
CONTENTS
10.1 Planning the Atmosphere
10.1.1 Atmosphere and Mood
10.1.2 Importance
10.1.3 Relating Atmosphere to the Customers
10.1.4 Atmosphere and Marketing Concepts
10.1.5 Developing the Concepts
10.1.6 Perception of Atmosphere
10.2 Colour
10.2.1 Effects on Individuals
10.2.2 Colour Characteristics
10.2.3 Colour Classifications
10.3 Lighting
10.3.1 Uses of Lights
10.3.2 Coloured Lights
10.3.3 Lighting Levels
10.3.4 Placement of Lights
10.4 Acoustics, Noise and Music
10.4.1 Sound Characteristics
10.4.2 Noise Control
10.5 Climate Control
10.6 Odours
10.7 Furnishings
10.7.1 Tables and Chairs
10.7.2 Drapes and Fabrics
10.7.3 Pictures
10.7.4 Table Settings
10.8 Exterior Design
10.8.1 Exterior Colour and Lighting
10.8.2 Decorative Detail
10.8.3 Parking Areas
10.8.4 Entrances
10.8.5 Landscaping
10.9 Personnel
10.10 Let Us Sum Up
10.12 Key Words
10.14 References
Food Service 10.0 AIMS AND OBJECTIVES
Facilities Planning
following:
 Developing the Atmosphere

 Perceptions of Atmosphere
 Colour Characteristics and its classification
 Types and Uses of Lights and
 Table Settings.
10.1 PLANNING THE ATMOSPHERE
10.1.1 Atmosphere and Mood
The atmosphere of food service facilities are considered to be

the total environment to which customers or users are exposed.
Atmosphere is sometimes described as everything that create an
impression on people.
Atmosphere is one of the prime generators of repeat

business and is an important aspect in the successful planning of
food service facilities.
The coming generation of potential customers is growing up

in an environment that associates dining out with more than just
food. They will be expecting to experience a variety of feelings and
these feelings will directly result of the atmosphere. The planning of
atmosphere may well include specialized audiovisual equipment and
other electronic devices to help create a particular mood.
10.1.2 Importance
Atmosphere has been identified as one of the inducement for

people to dine out. In addition to good food courteous service, the
diner is looking for a restaurant that offers luxury or excitement, or at
least something pleasant. Atmosphere is one of the prime
generators of repeat business and is an important aspect in the
successful planning of food service facilities. The coming generation
of potential customers is growing up in an environment that
associates dining out with more than just good food. The planning of
atmosphere may well include specialized audiovisual equipment and
other electronic to help create a particular mood.
10.1.3 Relating Atmosphere to the Customer
Many factors like individual preference, social custom, and

income level, needs of time and soon will be taken into account and
considered in light of the clientele constituting the market. The
atmosphere has to plan to appeal to the particular segment of the
market that the food service facility washes to attract. Both the right
menu offerings and the right atmosphere characterize well planned
90 restaurant.
10.1.4 Atmosphere and Marketing Concepts Planning
the Atmosphere
The food service industry continues to be more competitive
and the integration of marketing concepts into the creation of the
atmosphere is desirable from the stand point of increasing sales.
One way of approaching is to use attractive displays of food and
beverage in the dinning areas or lobby or lounge areas. Displays of
wines, salads, deserts for baked goods lend to the creation of a
pleasing dining atmosphere as well as help increase the sales of
these items. The use of salad bars, dessert carts, carving carts and
refrigerated display cases are some of the methods used to
accomplish this integration.
10.1.5 Developing the Atmosphere
Among other things the atmosphere to be developed for a

food facility should attract attention, be pleasing to the eyes and
provide an interesting change of pace. The development of the
physical and psychological aspects of the atmosphere depends in
great part upon the planners selected to design the facility.
10.1.6 Perceptions of Atmosphere
Atmosphere planning is dependant on an understanding of

the percentile awareness of individuals as sensed through sight,
touch, hearing, smell, temperature and movement. The primary
considerations of these perceptions as related to a dining experience
are summarized as follows.
(1) Sight: The perception of visual space involving

lighting levels, colours eye contact with fixtures and
decorator items and the use of mirrors and screens to
expand or contract the visual space.
(2) Touch: perception of seat comfort, body contact and

upholstery fabrics.
(3) Movement: perception of musicale activity required

for access to tables and chairs, movement of servers
and other customers movement outside as viewed
through windows.
10.2 COLOUR
Colour is one of the visual aspects of the atmosphere. As

perceived by individuals it is also one of the best tools that planners
have to create a variety of moods. Most people make a number of
choices based on colour, they select their cloths, cars, houses,
paints and even foods by colour. Colour can be used to induce a
feeling of happiness, to promote serenity, or to stimulate hunger. It
can attract people to one type of dining room and drive them out of
other. Certain colours are especially important to the development of
dining areas.
91
Food Service 10.2.1 Effects on Individuals
Facilities Planning
Many experiments have shown that certain colours have a
very strong emotion effect on most individuals. It is known that blue
reduces excitability and therefore helps one to relax. Blue is also
considered to be cooling and is "easy" on the eyes. Green is a
drawing. On dull, sunless days, people exhibit mental and physical
sluggishness, which is partially attributed to the absence of yellow,
red, and other stimulating colour. Red is associated with excitement
and violence. Gray suggests coldness and is very depressing unless
it s combined with livelier colours.
Colour sensations can sometimes produce physical reactions

that are not just of the visual system but effect the entire body. For
example, persons exposed to predominately red colours exhibit
increased blood pressure, quickened muscular reactions, and
greater emotions. Red also tends to produce restlessness and
makes time seem to pass very slowly. In comparison, persons
exposed to predominately blue and green colour have been found to
exhibit slower muscle response and quicker mental and
conversational response. Blues and greens also make time seen to
go faster. These may be used to develop the type of response
desired in various areas of the food facility. The colours have to be
predominant in an area and individuals must be exposed to them for
a period of time.
10.2.2 Colour Characteristics
Because of the strong effect colours may have on individuals,

care should be taken in selecting them to achieve the desired result.
One of the aspects of good colour planning deals with contrast. A
single predominant colour, no matter how pleasing, cannot function
alone. A restful green that is predominant colour individuals would
have to look harder to distinguish objects because of the lack of
contrast. Extreme contrast between very light and dark colours is
also undesirable since they too result in eyestrain.
In general, the desired degree of contrast can be obtained by

using the flowing guides.
i) Use light colour with a darker version of the same colour.
Pink and red result in a desirable contrast that is not
fatiguing.
ii) Use a weak chrome of a colour with a stronger chrome of
the same colour. A pale blue and a royal blue illustrate
this combination of colour.
iii) Use complementary colours such as peach and gray-blue
or pale pink and dull green. Achieving the right amount of
contrast along with maintaining the desired emotional
responses is necessary to the creation of a pleasing
environment for dining. Many to these colour
recommendations can be used in other areas of the
facility.
92
10.2.3 Colour Classifications Planning
the Atmosphere
Red, yellow and blue are the primary colours. They are
referred to as primaries because other colours are derived from
them. In their pure form the primary colours are too strong to use on
large areas and therefore are used as accents.
The secondary colours are green, orange and violet are

mixtures of two of the primary colours. Green is obtained by mixing
blue and yellow, orange by mixing red and yellow and violet by
mixing red and blue. Mixtures of primary colours and secondary
colour result in the intermediate coloured. Examples of intermediates
are red-orange, yellow-green, and blue-violet. The primary,
secondary and intermediate colours are shown on a colour wheel, as
illustrated.
It important to recall some of the fundamentals of colour

when thinking in terms of best is done in dining areas, bars rest
rooms and other public spaces. The best system for restaurant is the
combination of direct, indirect and spotlights. Another aspect is that
the daylight enter into an area is considered. The use of tinted glass
may be considered for some situations.
10.3 LIGHTING
The ultimate type of lighting areas has traditionally

considered as candlelight. The reddish flame of candlelight is
flattering to people and to most foods and the flickering of the flame
adds to the creation of a desirable atmosphere. The alternative for
candlelight is incandescent and fluorescent lights. The economy of
fluorescent lamps uses the floured of in large areas. Incandescent
light would be the best choice because of their red colour
enhancement. Properly selected fluorescent light may use in dining
areas if sufficient red tones are used in the colour scheme. The
deluxe warm white fluorescent tubes are the closet in colour tint to
incandescent bulbs which will also be recommended.
10.3.1 Uses of Lights
A low ceiling can be made appear higher if it is well lit, high

ceiling will appear lower if they are dimly lit. Care should be taken
not to the light the long walls brightly in narrow room since it will
appear to be even narrower. Dark walls will show better with bright
light, and if the colour is to be accented the illumination level has to
be high. Bright lights are placed above normal eye level to minimize
glare. Candles may be placed in forested globes if they are at eye
level or slightly below.
In dining areas it is best to concentrate illumination on the

seats and tables and perhaps on special design features. The ceiling
and walls should not be so brightly lit that they detract attention from
the room. Bright lights may be used to create a brisk atmosphere if
service is fast results in high turnover of customers. Some
operations may use full lighting for a high turnover at lunch and then 93
Food Service dim the lights for evening meals in hopes of attaining higher check
Facilities Planning averages.
10.3.2 Coloured Lights
Coloured lights affect the appearance of the faces and

clothes of people. Red lights have the advantages of flattering
complexions and tend to enhance to colour of fabric. Red lights also
have a good effects on most foods. Green and blue lights are
undesirable for illuminating areas where peoples where present and
these lights tend to distort the red house and are unflattering. Green
and blue lights may be used for in animate object that serves as
accent pieces. The use of pink and ivory or amber lights is
suggested for the areas where skin tone is important as they are
warm and impart a friendly and inviting feeling. It is better to use
times of colour rather than strong blues.
10.3.4 Lighting Levels
Lighting should not only provide atmosphere but should

reach a satisfactory level of illumination from a practical standpoint. If
the lighting level is too high individuals will have a feeling of
exposure or if too dim they may feel fearful. The bight of the ceiling
will provide a sufficient amount of light and at the same time results
in a comfortable soft effect.
10.3.5 Placement of Lights
The lights most complementary to human faces are from a

source that is at eye level or slightly below. High light angles produce
grotesque facial shadow by deepening eye sockets and showing
every wrinkle and hollow in the skin. The traditional table lamp and
table candles are recommended because their position as a light
source is ideal. The light source should not be bright enough to
cause glare.
10.4 ACOUSTICS, NOISE AND MUSIC
Other physical components of atmosphere are the level of

noise and the type of sounds present. Aside from dinner music,
sounds are to play a passive role and never attract attention. The
design goal is to create a balance between quiet and music. For
dining rooms a satisfactory acoustical environment has a reverberant
sound level that is high enough to be heard, but not so high that
individuals at nearby tables can distinguish what is being said. The
maintained of desirable souls at a acceptable level.
10.4.1 Sound Characteristics
In the room, sound is reflected from the walls, floor and

ceiling and can build up a general sound level much greater than
that which results from the same source in open space. Sounds
repeatedly reflected become noise and unwanted sounds.
94
The intensity of the sound is measured in decibel. The normal Planning
speaking voice has a intensity of about 60 decibels and sound the Atmosphere
intensity more than 100 decibels for a long time and constant
exposure leads to partial loss of hearing. When there is a sound in a
room the level of noise at any position is made up on two parts. The
first part is the direct sound traveling straight from the source and the
second is the reverberant sound which is the sound reaching the
position after multiple reflections from the room surfaces.
The intensity of direct sound falls off as the distance from the
source increases. Direct sound is reduced by about 6 decibels each
time the distance from the source is doubled. Reverberant sound
levels will generally be at uniform intensity throughout the room.
10.4.2 Noise Control
The problem of controlling noise levels is basically a matter of

suppressing the sounds from the source or reducing the amount of
reverberant sounds. Sound absorbing materials are used to
minimize both types of sounds. Much noise is from kitchen because
of materials like quarry tile or clay tile and tiled surfaces reflect a
large portion of sound striking them and straightens steel surfaces
acts as a drum.
Additional things that can be done to minimize noise from the

kitchen include the following:
 Selecting mechanical equipment such as fans and

compressors for quiet operation
 Using installation techniques that minimize duct noises,
the sound of water flow and water hammer
 Using silent closing devices on doors and drawers
 Providing rubber bumper for mobile equipment
 Sound proofing walls between kitchen and dining areas
 Placing a service station between the entrance to the
kitchen and the dining room
 Creating a quiet work environment to reduce employee
noise
 Using a spread load dishwashing concept where an
adequate inventory of china, silverware and glassware
are maintained to handle the entire meal period.
The use of music as a desirable sound is one way of

enhancing the audible environment. Music has a direct effect on the
mood of the individuals. Background music should be selected so it
does not attract attention. It should be soft, inoffensive and as
characterizes as possible. The correct use of background music can
put customers in a good mood for dining.
95
Food Service 10.5 CLIMATE CONTROL
Facilities Planning
It is one of the important factors affecting the comfort of the
people. Most individuals easily notice and quickly lead to discomfort.
Customers will quickly respond to environmental conditions that are
too hot, too cold, too drafty, too stuff and too damp.
The ideal climate for dining is 70 to 75 F (21.1 to 23.9 C) with

a relative humidity of 50%. Thermodynamic comfort is a function of
activity and their factors such as age, sex and the amount of clothing
worm.
Climate control in most regions requires both heating and air-

conditioning. The systems should have sufficient capacity to
maintain the desired temperature and relative humidity. Air inlets and
outlets should be placed to avoid drafts.
10.6 ODOURS
Odour are an important part of the atmosphere, because

smell usually evoken much deeper memories in individuals than
either vision or sound. People are often comfortable in odour free
surroundings, and pleasant odours can contribute to the desired
atmosphere. The popularity of display cooking areas in the dining
room is partially caused by the cooking aromas that are emitted.
Exhaust systems designed to rid the interiors of smoke,

furness and odours should be positioned top to avoid effecting the
immediate exterior environment. This is especially important for
exterior walks and entrances into public areas.
10.7 FURNISHINGS
Furnishings for the dining area are also correlated to the type
of atmosphere to be planned. The first thing for a individual after
entering the dining area is to sit. Therefore arrangement of tables,
chairs and auxiliary furnishings does much to effect the initial
impression on customers. Many people do not like to sit at exposed
tables because they feel observed. This problem is to overcome by
the use of booths or by planters that acts as partitions. Changes in
elevation, can be also be planned to break up large exposed areas.
10.7.1 Tables and Chairs
Tables, chairs and banquettes should be large enough to

seat diners comfortably without crowding. Distance between tables is
sized to enable waiter or waitresses to move through the area while
serving and allow diners to eat and converse without being
distracted. Chairs must have suitable shape, angle of seat and back,
size, relationship to table and tactile qualities to be comfortable.
Table space of at least 26 inches should be allowed or chairs without
arms to provide elbowroom. Armchairs require a minimum table
space of 28 inches and the height of chairs will be 17 to 18 inches.
96
Cashier areas should be placed for ease of access and in Planning
consideration of flow patterns. Bars, buffets, wine displays or other the Atmosphere
merchandising setups are placed for maximum visibility and
exposure to the customers.
10.7.2 Drapes and Fabrics
This will be selected with the blend of contrast with the

architectural features of the building. Drapes and floor coverings are
selected to give an overall appearance of unity and balance. Fabrics
contribute not only by their visual impact, but also by the fact that
they are more pleasant to touch hard surfaces. Designer may use
grass wallpapers, ceramic tile, cork, linen, silk, brick and other
materials that are textured and appealing for wall coverings.
10.7.4 Pictures
Pictures and prints used to decorate wall areas add

considerably to the atmosphere. The advantage in using these items
is they can be easily changed. The pictures selected should not
clash with the decorative scheme. The shape and size are correlated
to the walls on which they will be placed. Colours within the pictures
or on frames should blend with the overall scheme of the room to
give a coordinated appearance.
10.7.3 Table Settings
Table settings can enhance the appeal of the dining

atmosphere. Customers notice the tableware they are using and will
thus form an impression of the restaurant. Each item placed on the
tale is selected to add the feeling mood to be created in the room.
This pertains to dishes, glasses, silver, napkins and tablecloths.
10.8 EXTERIOR DESIGN
The term exterior as used in food facilities design is taken to

include signs, landscaping, parking areas, building structure, doors
and windows. The objective of exterior design is to attract
customers. Exterior design has to be coordinated with interior design
to provide the total atmosphere.
10.8.1 Exterior Colour and Lighting
The colour and lighting has a great importance in the design

of the exterior facility. Colour and lights can be used in signs,
facades, building elements and landscaping. Flood lighting is
frequently used with the success when the architectural features of
the exterior are appealing or dramatic. Care must be used in sizing
and placing windows in flood lighted areas to prevent glare into the
building.
97
Food Service 10.8.2 Decorative Detail
Facilities Planning
The amount and kind of decorative detail used on the
building exterior is chosen to reflect the total atmosphere concept of
the food service facility. Some designers may prefer to rely on the
elegance of simplicity and use little if any decorative detailing. On the
other hand facilities with perhaps a national theme require carefully
selected exterior details to complete the concept of total atmosphere.
10.8.3 Parking Areas
The case of entering and leaving the parking lot as well as

the individual parking space is critical to good design. Consideration
should also be given to the placement of walkways from the parking
lot to the building. The locations of exterior trash and garbage
containers have to be selected carefully. The customers' first
impression of a food service facility is as they enter the streets, the
cleanliness of exterior areas at all times.
10.8.4 Entrances
It will be selected in accord with the overall design of the

building exterior. Doors may be all glass, half glass, wood or metal,
plain or with panels. Separate entrances to the bar are provided if
the non-dines will use the bar. Entrances doors are located for easy
access for streets or parking areas. An entrance area can have
several desirable functions it may convey a sense of spaciousness
and enhance the atmosphere. Entrance areas also provide a
meeting place for people and can be used as waiting space during
rush hours.
10.8.5 Landscaping
A well-landscaped exterior may overcome the added cost by

attracting more customers. Landscaping provides the setting for the
facility. The other use of landscaping is to hide undesirable service
areas or views for dining areas that are not pleasant.
The landscape architect may use contours, plant textures,

heights, rocks, pathway surfaces or garden furniture to achieve the
desired exterior appearance. The landscaping must harmonize with
the exterior features of the building so that a good impression is
created from all angles of view.
10.9 PERSONNEL
The atmosphere for food service facilities is created for

people who want to be satisfied by that environment. In a long run
people will be more influenced by the employees that they come in
contact with than by anything else. A cod welcome, poor service or
indifferent attitude can ruin all the friendliness, which the colour,
decor, lighting and furnishings have created. The physical
components of the atmosphere are ineffective unless they are
98 complemented by the human components.
The projection of atmosphere is carried to the point of Planning
selecting uniforms for waitresses, bartenders, bus boys and other the Atmosphere
personnel. The style and colour of uniforms are an integral part of
the decor and add a touch of personality.
CHECK YOUR PROGRESS
1. Identify the significant of the atmosphere for the food service

area.
2. ……………… colour is also considered to be cooling and is
“easy” on the eyes.
3. …………………. , ………………… and ……………….. are the
primary colours.
4. The secondary colours ……….. , ………. and ……….. are
mixtures of two of the primary colours.
10.10 LET US SUM UP
The atmosphere of food service facilities are considered to be

the total environment to which customers or users are exposed.
Atmosphere is sometimes described as everything that create an
impression on people.
Atmosphere planning is dependant on an understanding of

the percentile awareness of individuals as sensed through sight,
touch, hearing, smell, temperature and movement.
The intensity of direct sound falls off as the distance from the
source increases. Direct sound is reduced by about 6 decibels each
time the distance from the source is doubled. Reverberant sound
levels will generally be at uniform intensity throughout the room.
Odour are an important part of the atmosphere, because

smell usually evoken much deeper memories in individuals than
either vision or sound. People are often comfortable in odour free
surroundings, and pleasant odours can contribute to the desired
atmosphere.
The projection of atmosphere is carried to the point of

selecting uniforms for waitresses, bartenders, bus boys and other
personnel. The style and colour of uniforms are an integral part of
the decor and add a touch of personality.
1. Give your own view of creating suitable atmosphere for food

service facility.
2. Design the furniture which suits the food service area according
to the modern trend.
99
Food Service 10.12 KEY WORDS
Facilities Planning
Inducement Encouragement / Motivaton
Constituting Compose / Corresponded
Excitability Easily excited
Slugyishness Lacking in energy / not acting with full vigor
Distort Disfigure / Mis shape
Reverberant Rebound / Reflect
In offensive Causing no harm or trouble
1. How do you create good mood and atmosphere which suits food
service facility?
2. Discribe the classification of colour.
3. Give the characteristics of colour.
4. Explain the types of lighting.
5. Write short notes on (i) Sound characteristics (ii) Climate control

(iii) Noise control.
6. Give a brief about exterior design, colour and lighting.
1. Atmosphere has been identified as one of the inducement for

people to define out. In addition to good food courteous service,
the diner is looking for a restaurant that offers luxury or
excitement.
2. Blue.
3. Red, yellow and blue.
4. green, orange and violet.
10.14 REFERENCES

British Library.
100
LESSON 11
WORK PLACE DESIGN
CONTENTS
11.1 Introduction
11.2 Developing Workplace
11.3 Floor Space
11.4 Work Surface Space
11.5 Height
11.6 Material, Tool and Utensil Storage
11.7 Mounted Equipment
11.8 Freestanding Equipment
11.9 Workplace Seating
11.10 Workplace Environment
11.11 Thermal Comfort
11.12 Lighting
11.13 Colour
11.14 Noise
11.15 Ventilation
11.16 Air-Conditioning
11.17 Concepts of Motion Economy
11.18 Materials Handling
11.19 Designing Safe Workplaces
11.20 Let Us Sum Up
11.22 Key Words
11.24 References

following:
 Developing Workplace
 Material, Tool and Utensil storage
 Workplace environment
 Ventilation and
 Air-Conditioning.
11.1 INTRODUCTION
Work place design: Developing work places, work place

environment, concepts of motion economy, materials handling,
designing safe work places.
Food Service Equipment requirements: Methods, equipments check list,
Facilities Planning broilers, griddles, ovens, ranges, steam-jacketed kettles, streamers,
ware washing equipments, waste disposals, and equipment
selection.
11.2 WORK PLACE DESIGN
One of the steps in planning a foodservice facility for

maximum efficiency and productivity is the design of the workplace.
Workplaces are identified as the location and facilities where one or
more employee can perform their respective tasks. The design of
work places includes determines the necessary floor space, work
surface space, storage space, and necessary equipment. As
emphasized earlier, identification of the tasks that must be
accomplished is one of the first steps in planning a restaurant. At this
point in the planning process, a further evaluation of the tasks is
needed. Decisions regarding the specific materials required and the
work methods to be used are finalized. Questions to be resolved
include the following.
i) Who will do the task?

ii) Will the task be done manually?
iii) Where will the task be done?
iv) Where are the form, shape and characteristics of the
materials?
v) What hand tools will be required?
vi) What kinds of utensils will be used?
vii) What is the best work pattern to use?
viii) How will the materials be brought to and removed from the
work place?
ix) What must be stored at the workplace?
One method of systematically deciding some of these

questions is by a detailed analysis of the menu. This involves taking
a typical menu and evaluating each of the items listed. Using the
format illustrated may do the menu analysis. The use of standard
recipes for each menu item is very helpful in completing this
analysis.
The menu analysis will identify the workplaces needed to

produce the food items only. Workplaces for processing non food
items are developed by a similar analysis of the tasks required for
processing the various items. This will enable the planner to develop
workplaces for dishwashing, pot and pan washing, linen sorting, and
can washing, to name a few. Similarly, the processing of paperwork
will lead to the development of workplaces for purchasing
inventorying, personnel management, and cost control tasks.
Having accumulated the desired information, the designer will

104 develop the workplaces by providing for the following areas.
(1) Adequate floor space for the worker to move around in. Work Place Design
Working surface space for the tasks; this may take the form
of a work table, a counter surface, or in some cases a piece
of equipment used for working surface space.
(2) Space for temporary storage of incoming materials.

Incoming materials may be placed on tables or carts, pans,
or on specially designed equipment. Soiled dish tables are
subtractive of the type of space needed.
(3) Space for temporary storage of finished products.

Examples of this type of storage are salad carts, hot food-
holding equipment, mobile shelf units, and even conveyors.
A mobile cart for holding trays of salads is versatile piece of
equipment.
(4) Space for storage of frequently used minor materials and

ingredients, seasonings, condiments, dressings and sauces
may be stored in special containers at the workplace.
(5) Space for hand tools required for the tasks.
(6) Space for the floor-mounted or freestanding equipment

required for processing. A brief description with
recommendations for designing the workplaces for general
foodservice operations will be given. Different designs may
have to be developed for special operations that have
special requirements.
11.3 FLOOR SPACE
The floor space required for a worker to accomplish manual

tasks is frequently referred to as work aisle space. Work aisles are
separated from traffic aisles as much as possible to assure minimum
interference with the worker. The amount of space required for a
single person work aisle is from 24 to 36 in. (610 to 914mm). A 24 in.
(610mm) work aisle is the bare minimum and would not be suitable
for tasks that require bending and stooping or where equipment
components like doors and controls extend into the aisle. A 30 in.
(762 mm components like doors and controls extend into the aisle. A
30 in. (762 mm) work aisle is desirable, since this allows freedom of
movement for the worker. When oven or steamer doors extend into
the aisle space, additional room is allotted as needed for the
situation. For example, an aisle space of 36 in. (914mm) would be
used when employees work with ovens.
For situations where two workers will be working back-to-

back, the recommended minimum work aisle space is 42in.
(1067mm). This does not include the allowance for equipment
projections into the aisle space. In most cases, an allowance of 6 to
12 in (12 to 305 mm) is sufficient.
105
Food Service 11.4 WORK SURFACE SPACE
Facilities Planning
Requirements for work surface space are dependent upon
the materials used and the types of hand and arm actions needed to
work on the materials. The worker’s hand and arm movements
should be confined to the normal and maximum work areas as much
as possible. The normal work area for a work surface is defined as
the space enclosed within the scribed by pivoting the forearm to
horizontal plane at the elbow. The worker should be in a typical
working distance. The scribed on the working surface will have a
radius of 14 to 16 in. (356 to 406mm) for most people. The area
within the scribed by each hand described the normal work area for
each hand. Where the arcs overlap in front of the body is the normal
work area for two handed tasks. Hand actions for such tasks as
cutting, slicing, mixing, or assembling are best performed within the
normal work area.
The maximum work area is defined in a similar manner

except that the entire arm is pivoted at the shoulder. Illustrates the
normal and maximum work areas in the horizontal plane. Location
outside the maximum work area require bending of the body to reach
them and therefore movements to these locations should be kept to
a minimum.
In consideration of the normal and maximum work areas, the

work surface for most tasks performed in food facilities can be done
within a space 2ft. (0.61m) deep and 4ft. (1.22m) in width.
11.5 HEIGHT
The height of the work surface will vary with the type of tasks.
Tasks involving small, light-weight materials can be easily done at a
surface height which is about 2 in (50.8 mm) below the height of the
worker’s elbow. The makeshift work surface is too low for
comfortable work. As the materials involved in the task become
larger or heavier, the height of the work surface can be lowered. The
lowest surface is at the point where the wrist bends when the arms
are extended at the worker’s sides. This height allows workers to use
their shoulder and back muscles and handling the heavier materials.
General recommendations for work surface heights for light

tasks are 37 to 39 in. (940 to 991mm) for workmen and 39 to 41 in.
(991 to 1041mm) for men. Work surfaces for heavy tasks are usually
34 to 36 in (864 to 914mm) height. Adjustable work-surface heights
to fit both worker and tasks are the ideal design; however, the
adjustable chair may be used to provide the needed adjustment at
lower cost.
11.6 MATERIAL, TOOL AND UTENSIL STORAGE
The materials, tools and utensils frequently used for tasks

may be located in various placed at the workplace. Over shelves,
under shelves, bins, drawers, and cabinets can all be incorporated
106 into the design. The ideal location for storage facilities at workplaces
is between waist and shoulder height. Items that have to be stored Work Place Design
below waist level can be put on pull-out or swing-out shelving.
Cabinets with fixed shelves below waist level are not easy to use.
For the same above the floor. Self-closing cabinet doors and
drawers are desirable. Mobile bins or carts may be used adjacent to
the workplace if additional storage is needed.
A definite fixed location for all materials and tools to be stored

at the workplace is a good design. The location is selected in
accordance with easy work patterns and help employees to develop
good work methods. Designers can often dictate a particular pattern
of desirable motions and actions by their storage placement of
materials and tools at the workplace.
11.7 MOUNTED EQUIPMENT
Equipment that is to be mounted at a workplace should also

be designed with the worker in mind. Slicers, mixers, kettles,
grinders and similar equipment may be mounted on tables or carts at
a height that will make them easy to use. Feeding and working
heights is important from the standpoint of safety. If the feeding or
working level is too high, as illustrated by the kettle, the worker will
be forced to use awkward motions that can be hazardous.
Built-sinks are required at many workplaces and should be

placed at convenient heights. Sinks that are placed too low will
require bending, and sinks placed too high are difficult to use.
Preparation sinks used for light work are designed so the bottom of
the sink is 10 to 12 in (254 to 305 mm) below the worker’s elbow.
Sinks for heavier tasks, such as pot and pan washing, generally
require a bottom depth of 16 to 18 in (406 to 457mm) below elbow
height. As with other components of the workplace, sink heights
should be designed to fit the worker and the task.
11.8 FREESTANDING EQUIPMENT
The uses of large pieces of foodservice equipment that will

be freestanding or mounted to the floor deserve special attention.
Some equipment, ranges and griddles, for example, can be
considered as a separate workplace for certain types of cooking
tasks. In other cases, additional work surface space may be
required, and the combination of the equipment and a work table are
considered as the workplace. Other combinations of equipment can
be developed to meet the requirements of the tasks to be performed.
The description of a workplace to meet the requirements of the tasks
to be performed. The description of a workplace for one food facility
does not necessarily apply to all facilities. Workplaces for the project
at hand, which usually results in different combinations of equipment
and work surfaces.
Regardless of the type and number of major items of

equipment in the work area, the recommendations related to height
and ease of use applies. Ranges, for example may be set down into
the floor so that pots placed on top of them are low enough to see 107
Food Service into and stir easily. Similar recommendations apply to freestanding
Facilities Planning kettles, ovens, griddles, fryers, broilers, and other items or
preparation and production equipment.
11.9 WORKPLACE SEATING
Chairs are desirable at workplaces where the tasks require

only hand and arm movements and are respective in nature. Seat
heights between 24 and 30 in. (610 to 762 mm) will be suitable for
most variations of workers and tasks. Adjustable footrest are
recommended so that leg circulation in shorter people will not be
impaired when their legs danger without support. Wherever chairs
are to be used, the tables are designed to allow sufficient space for
positioning the legs and feet. A minimum of 25 in. (635 mm) of
clearance under the table is recommended.
After all the components of the workplace have been

determined, they are arranged in to final design based on a normal
flow of work. Symmetry in arranging the components of the
workplace is important in conveying a sense of order. Most workers
respond extremely well to an orderly environment and will work more
productively under these conditions.
11.10 WORKPLACE ENVIRONMENT
The design of the environment where workers will perform

their tasks is just as important as providing them with the required
space, tools and equipment. Although certain tasks may require
special environmental conditions, most workplaces are designed for
the maximum performance of the worker. The concepts of
environmental design are drawn from the head of human
engineering. In the broadest sense, human engineering deals with
the design of human tasks and the working environment that
maximizes a worker’s output with the least amount of input. Of the
many areas encompassed by the field of human engineering, only
those that pertain to the design of work environment will be
highlighted.
Many of the factors affecting the environment were discussed

earlier in relation to development of the dining atmosphere. These
factors are now presented in the light of a worker’s requirements.
The difference between a dining and working environment are
caused by the different objectives involved. There are, of course,
several similarities in both environments.
11.11 THERMAL COMFORT
Workers are very aware of the factors that influence their

sense of thermal comfort. Continuous exposure to high temperature,
high relative humidifies, and radiation effects from hot equipment
cause most of the feelings of discomfort. For example, effective
temperatures between 65 and 70 F (18.3 and 21.1 C) in winter and
69 to 73 F (20.6 and 22.8 C) in summer are recommended for most
108 tasks. These recommendations may be modified some what
depending on the age and sex of the workers. Older people, Work Place Design
especially women, prefer slightly higher temperatures. Some people
can adjust to temperature outside the recommended range without
to much difficulty.
Radiation effects result when a worker is exposed to

extremely hot or cold surfaces even though the air temperature
around the body is at a comfortable level. Working near ovens,
broilers, fryers and other high-temperature equipment illustrates this
effect. Continued exposure to high temperature surfaces causes
increased body and skin temperature that leads to thermal
discomfort, exposure to extremely cold surfaces results in heat loss
from the body, which produces the sensation of coldness.
Relative humidity recommendations call for a range of 40 to

60%. Higher humidifies cause thermal discomfort, and lower
humidifies result in the drying of skin and nasal passages.
Control of the worker’s thermal environment is basically

incorporated into the heating, cooling, and ventilating system of the
building. Special consideration has to be given to kitchen areas
because of the large number of heat-and moisture-producing pieces
of equipment present. The amount of heat and moisture added to the
kitchen environment from equipment can be minimized by selecting
equipment that is well-isolated or by specifying additional insulation.
All pipes carrying steam or hot water to equipment should also be
insulated. Proper venting equipment is important especially for
mechanical dishwashers.
11.12 LIGHTING
Lighting recommendations for workplaces are determined by

the amount of visual effort needed to accomplish a particular task.
Obviously, tasks requiring greater visual effort, as reading or book
work, will require a higher lighting level. The recommended lighting
level for general areas of a kitchen that are non work area is 15-20
foot-candles (161-215 lux). Working surfaces require 30-40 foot-
candles (323-430 lux) for most tasks. Tasks that involve reading and
working with figures should have a minimum of 50 foot-candles (538
lux).
Either incandescent or color-improved fluorescent lamps may

be used for work areas. General White fluorescent lamps are not
desirable because of poor color perception that results with many
foods. Incandescent lamp is available in a variety of types and permit
flexibility of design. Fluorescent lighting systems are more expensive
to install but operates more efficiently than incandescent systems.
Brightness ratios between the work and adjacent areas are

considered in the design of the lighting stem. Current lighting
indicates that best results are obtained when the brightness ratio
does not exceed 3 to 1, the work itself being the brighter.
109
Food Service Special care is required in planning the lighting system for
Facilities Planning work places to eliminate both direct and reflected glare. Direct glare
is the result of locating the luminaries near the line of sight. Any
luminaries that are placed within 30 degrees above the line of sight
of the worker should be screened. Reflected glare occurs when
highly polished surfaces in the line of vision reflect the light striking
them. Stainless steel tables and equipment, being especially good
reflectors, cause many of the glare problems in food service
facilities. Glare is highly disturbing to workers and leads to
discomfort and fatigue.
A well-planned lighting system for workplaces should provide

enough brightness for the worker to see everything he must see to
perform his task efficiently. This includes light for seeing into
drawers, shelves, cabinets and equipment. Light sources are space
and arranged in a manner that will illuminate the workplace uniformly
without shadows or dark spots.
11.13 COLOUR
Colours are used to enhance the worker’s feeling of well-

being and consequently their work performance. Since the
psychological aspects of color were described in, only general
comments on the use of colors at workplaces will be made.
The uses of warm colours are discouraged for general

painting of workplace areas because they tend to tire the eyes after
a period of time. Blue and green are much easier on the eyes. Pure
colors are also hard on the eyes and should be toned down,
especially in areas where a lot of close work is to be done. The use
of pure white in any area along the worker’s line of sight is
discouraged because of its reflectance quality.
11.14 NOISE
Noise level of 50 decibels or less is recommended for work

areas. Somewhat higher levels may be tolerated for a short period of
time but continued exposure to high noise levels leads to short-
tempered, quarrelsome and dissatisfied workers. Most sources of
noise can be prevented or controlled at acceptable levels by proper
design. Sources of noise are classified as follows:
(1) Impact noises resulting from contact between hard
objects, such as metal utensils banged against metal
sinks, or pieces of china begged against each other
(2) Gear noises caused by the contact of moving parts of
equipment and machinery
(3) Fluid-flow noises of air, water, or gases produced by fans,
pumps, and compressors
(4) Combustion noises resulting from the burning of fuels, as
in gas cooking or heating equipment
(5) Magnetic noises produced by transformers and electric
110 motors used for foodservice equipment.
Effective noise control is achieved by reducing the Work Place Design
transmission of air-borne and structurally transmitted noises. Air-
bone transmission of noise can be controlled by placing silencing
enclosures around the noise source or by using should-absorbing
surfaces to reduce the amount of reverberation Silencing enclosures
must be constructed in such a way that the enclosed piece of
equipment or machinery can be operated and maintained.
Unfortunately, silencing enclosures cannot always be built for all the
noise-producing sources in work areas.
Structurally transmitted noises can be minimized by installing

equipment on vibration isolating mounts. Using plastic dish racks
and other containers will reduce both the creation and transmission
of noise.
11.15 VENTILATION
Adequate ventilation of work areas is necessary to remove

smoke, odors, moisture, and grease-laden vapor and to bring in
fresh air. A well planned ventilating system can reduce the amount of
general cleaning and maintenance.
A general recommendation for ventilation of foodservice work

areas is to supply 5 cubic feet per minute of fresh air per square foot.
(0.142 cubic meters per minute per square meter) of floor space.
This recommendation assumes the presence of heat-and moisture-
producing equipment in the area. Air vents for the ventilating system
are sized and placed to obtain maximum effectiveness without
causing drafts. Fresh air should be tempered by air make up system
based on outside air characteristics. Make-up air can sometime be
drawn from dining areas if a suitable design can be worked out.
11.16 AIR-CONDITIONING
In warmer climates, air conditioning of work areas is needed

to maintain the desired environmental conditions. The design of air-
conditioning systems for food facilities is very complex because of
the special requirements of the cooking process. On one hand, heat-
producing equipment is used for cooking which introduces unwanted
heat into the general work areas. The air-conditioning system, on the
other hand, is used to cool the same general work areas. In a sense,
the work areas are being heated and cooled at the same time. The
air-conditioning system has to be designed with sensitive controls to
maintain the desired environmental conditions without causing an
overload for cooking equipment. The rapid cooling of cooked foods
exposed to air-conditioned spaces must be taken into account in the
design of the system.
11.17 CONCEPTS OF MOTION ECONOMY
Although some of the concepts of motion economy have

been implied in the discussion of many subjects in this chapter, a
separate identification of them will show their application to the
design of workplaces. Planner should frequently check their design 111
Food Service against these well-known concepts and make changes as needed.
Facilities Planning The important concepts of motion economy as they pertain to the
design of the workplace are given.
11.18 MATERIALS HANDLING
Another field of knowledge that is useful in the design of work

places deals with the principles of materials handling. Good design
requires a system of materials handling that is desirable for each
individual workplace, which in turn makes up the materials-handling
system for the entire food service facility systems for the handling of
food, utensils, garbage, dishes tools, etc., at the workplace can be
guided by the principles identified.
The principles of materials handling should be used to

develop the system for moving materials from workplace to
workplace as well. The total design of the system for the facility has
to be unified in order to achieve maximum efficiency of movement.
11.19 DESIGNING SAFE WORKPLACES
Although some aspects of workplaces safety are dictated by

ordinances and codes; good design results only when all areas
relating to a safe environment are considered. A workplace safety
check list such as shown may be helpful in the development of safe
workplaces.
Designing safe workplaces is reflected in a reduction of

accidents and may result in reduced insurance premiums after a
foodservice facility is operational. Safe areas also lead to improved
employee morale and increased productivity.
CHECK YOUR PROGRESS
1. The design of work places includes ………………, ………………,

……………………. and ……………………
2. Lighting recommendations for workplaces are determined by the

……………… needed to accomplish a particular task.
3. General recommendations for work surface heights for light tasks

are ………………….
11.20 LET US SUM UP
One of the steps in planning a foodservice facility for

maximum efficiency and productivity is the design of the workplace.
Workplaces are identified as the location and facilities where one or
more employee can perform their respective tasks. The design of
work places includes determines the necessary floor space, work
surface space, storage space, and necessary equipment. As
emphasized earlier, identification of the tasks that must be
112
accomplished is one of the first steps in planning a restaurant.
The materials, tools and utensils frequently used for tasks Work Place Design
may be located in various placed at the workplace. Over shelves,
under shelves, bins, drawers, and cabinets can all be incorporated
into the design. The ideal location for storage facilities at workplaces
is between waist and shoulder height.
A well-planned lighting system for workplaces should provide

enough brightness for the worker to see everything he must see to
perform his task efficiently. This includes light for seeing into
drawers, shelves, cabinets and equipment. Light sources are space
and arranged in a manner that will illuminate the workplace uniformly
without shadows or dark spots. Adequate ventilation of work areas is
necessary to remove smoke, odors, moisture, and grease-laden
vapor and to bring in fresh air. A well planned ventilating system can
reduce the amount of general cleaning and maintenance.
Designing safe workplaces is reflected in a reduction of

accidents and may result in reduced insurance premiums after a
foodservice facility is operational. Safe areas also lead to improved
employee morale and increased productivity.
1. Do the project work on design and development of workplace.

2. Give your suggestions for designing safe work place.
3. Explain briefly about workplace seating and Environment.
11.22 KEY WORDS
Kettles A metal container in which to boil liquids, cook foods etc.

Symmetry Balance, Harmony, Conformity
Drovers A person or thing that draws.
1. Highlight the development of work place.

2. Outline the storage material, tool and utensils.
3. Explain the role of colour and lighting in workplace.
4. Classify the source of noises in detail.
5. Identify the significant of the provision of ventilation and air
conditioning in workplace.
1. necessary floor space, work surface space, storage space and

necessary equipment.
2. amount of visual effort.
3. 37 to 39 in.
113
Facilities Planning
British Library.
114
LESSON 12
PREPARATION EQUIPMENTS
CONTENTS
12.1 Preparation Equipments
12.1.1 Food Cutters
12.1.2 Slicers
12.1.3 Mixers
12.1.4 Vertical Cutter / Mixer
12.1.5 Vegetable Peelers
12.1.6 Rangers
12.1.7 Steam-Jacketed Kettles
12.1.8 Steamers
12.2 Ware Washing Equipment
12.3 Waste Disposal
12.4 Equipment Selection
12.5 Let Us Sum Up
12.7 Key Words
12.9 References

following:
 Preparation equipment
 Ware washing equipment broilers
 Waste disposal and
 Equipment selection.
12.1 PREPARATION EQUIPMENTS
12.1.1 Food Cutters
Food cutters are versatile pieces of equipment than can

handle meats, vegetables and fruits. The food cutter can cut, dice,
shred and almost liquefy foods depending upon the amount of time
the food is left in the cutter. The foods to be size-reduced are placed
in rotates and exposes them to high-speed rotating blades. The
capacity of cutters is measured by the size of the bowl or by the
amount of food that can be processed per minute. Both bench and
floor models are available. Some cutter models are equipped with an
attachment hub for accepting various attachments.
Food Service 12.1.2 Slicers
Facilities Planning
The basic design of food includes a circular knife blade and a
carriage that passes under the blade. Food to be sliced is place on
the carriage and are either hand-fed or automatically fed. A much
closed adjustment and consequent control of thickness of the slices
can be obtained with slicers.
12.1.3 Mixers
The primary function of a mixer is to mix; however, it can

perform a variety of other functions by using accessories and
attachment. Mixer capacity is indicated by the capacity of the bowl,
Bench models are sized from 5 to 20 qt (4.73 to 18.9 liter); larger
floor model range from 30 to 400 qt (28.4 to 378 liter) capacity. Most
mixers have adapter rings enabling them to handle different-sized
bowls. Larger models can be obtained with bowl raising and lowering
mechanisms to simplify handling large bowls.
Mixers are designed to operate at a variety of rotational

speeds, depending on the job. Accessories available include various
whips, beaters and knives attached directly to the drive shaft.
Attachments, which permit the mixer to perform other functions, are
adaptable only to the mixers that have an attachment hub. Available
attachments include a food chopper, dicer, slicer, juice extractor, tool
sharpener, and a variety of shredder and grater plates.
12.1.4 Vertical Cutter / Mixer
The vertical cutter/mixer is basically a stationary bowl with

horizontal blades that rotate at high speed. The capacity of a vertical
cutter/mixer is much greater than the typical food cutter and is
suitable for large volume operations. Capacity is designated by the
bowl size and ranges from 25 to 60 at (23.7 to 56.89 liter)
Vertical Cutter / mixers, illustrated, operate at a very high

speed and can be used for cutting blending chopping, mixing,
grating, crushing and stirring many different food items.
12.1.5 Vegetable Peelers
Vegetable peelers are cylindrical tanks that have a revolving

disc at the bottom tank is equipped with two openings, one above
the disc for loading vegetables and one below it for removing the
peels. Depending upon the model, the disc or the walls, or in some
cases both, are coated with an abrasive. As the disc revolves, the
vegetables are throwing against the abrasive, which peels the skin.
Water is introduced to keep the abrasive surface clean and to carry
away the peeled skins to the lower opening. Peeling time varies with
the type of vegetable and may be from 30 seconds to 4 minutes.
Capacity of peelers is designed by the quantity of vegetables

that can be placed in the peeler. Capacities from 15 to 70 Ib (6.81 to
116
31.8 kg) are typical. Some manufacturers designate capacity by
relating it to the horsepower rating of the electric motor.
12.1.6 Rangers Preparation
Equipments
The advent of new processed foods and new equipment,
coupled with the shortage of skilled chefs, have relieved the need for
a large battery of ranges for many types of foods service facilities.
The range is still a favorite for operations that feature cook-to-order
items and homemade menu items.
Heavy-duty ranges are designed to meet the requirements of

continuous high production volumes. Restaurant-type ranges are of
lighter construction and do not have the durability for continuing
heavy production requirements; they are suggested for smaller
operations or for limited-use applications.
A variety of range designs are available, including solid tops,

open tops and griddle tops. Most ranges will have ovens under,
although models with shelves or storage cabinets under are used in
some cases.
Range sections are usually 29-37 in. (737-940 mm) wide and
from 34 to 42 in. (864 to 1067 mm) deep. Sections are joined to give
any desirable range top area to meet the requirements of the food
facility.
12.1.7 Steam-Jacketed Kettles
Steam-Jacketed kettles are constructed of two sealed one

within the other, with about 2 in. (51 mm) of space between them for
the introduction of steam. The amount of steam surface between the
bowls is referred to as jacketing and models from half-jacketed
kettles utilizes steam, which is condensed back to water in the jacket
to provide the heat for the inner kettle. A condensate line is provided
to remove the water that accumulates. The amount of heat input is
dependent upon the pressure and amount of steam allowed to enter
the jacketed areas.
Smaller steam-jacketed kettles may be mounted on tables or

counters; larger models are mounted to the floor or wall. Many
models can be titled for easy removal of contents. A tilting steam-
jacketed kettle mounted on a pedestal base, which makes it easy to
use. Capacity designations are in quarts for smaller models and
gallons for larger models. The usable capacity of steam-jacketed
kettles is generally figured to be 75% of stated capacity.
12.1.8 Steamers
Steamers are basically sealed compartments where steam is

allowed to come in direct contact with the food for cooking.
Conventional steamers operate with steam at a pressure of 5 psi
(34.5 kpa), which corresponds to a temperature of 227Fo (108.3o C).
These steamers are referred to as large compartment steamers and
are capable of producing larger volumes of food.
High-pressure steamers, sometimes called speed-cookers, 117

are smaller units that operate with steam at a pressure of 15 psi (103
Food Service kpa). The resultant temperature in the high-pressure steamer is
Facilities Planning illustrated.
Pressure less steamers operate at zero, psi, which

corresponds to a cooking temperature of 2120 F (1100 C). The
obvious advantage of the pressure less steamer is the ability to open
the door during the cooking process, which can not be done with
either the low pressure or the high pressure steamers. Some models
of pressure less steamers. As shown, have the boiler that creates
that steam housed underneath the steamer compartment.
The capacity of a steamer is designed by the number of

steamer pans that can be placed in it one time. Usual capacities
range from units that can hold three 12 by 20 in. (305 by 508 mm)
pans to those having a capacity of 18 pans. An usually designation
of bushels is sometimes used to indicate steamer capacity; this
implies the bushels of vegetables that can be cooked at one time in
the steamers.
Typical processing times for some foods for conventional and

high-pressure steamers are given. These times may be used to
determine the number of batches that can be processed per hour.
Steamers are ideal for vegetable cookery because they retain

the color and textures without undue shrinkage. Both fresh and
frozen vegetables may be steamed.
12.2 WARE WASHING EQUIPMENT
Dish washers are the major item of equipment for ware

washing and are generally classified by the number of tanks. A
single-tank dish-washer is the smallest-capacity machine and is
used for limited facilities. Counter-service operations frequently use
single-tank dishwashers that are either bench-mounted or placed
under counters or work tables. Most single-tank dishwasher has only
a wash-and rinse cycle.
Two-tank dishwashers are used for greater loads and are

available in rack or reckless models. They usually have a power
wash cycle, a power rinse cycle, and a final rinse cycle. Some
models may omit the power rinse and have a pre-wash cycle
instead. The discharge sections are designed to allow sufficient
drying a dinnerware before it is handled.
Larger three-rank dishwashers have power pre-wash, wash,

and rinse sections, and many are designed for a final rinse cycle as
well.
Dishwasher capacity is stated in terms of numbers of pieces

of dinnerware that can be washed per hour. Some manufacturers
also have recommendations of size based on the number of meals
to be served per meal period. For example, a single-tank dishwasher
will be suitable for washing dinnerware from 50 to 600 meals per
118 meal period. Two-tank machines are capable of handling dinner
washers are usually rated for 2500 meals. These recommendations Preparation
are guides, and the actual capacity required for a particular operation Equipments
will depend on the number of each type of dinner ware to be washed
and the time allowed for washing.
Some operations may prefer separate glass washers,

especially if large numbers are to be washed daily. Small glass
washers are frequently located in bar areas and in counter units.
12.3 WASTE DISPOSAL
Most waste disposal units operate by using water to carry the

waste into shredders that cut it into small pieces. As the size of the
pieces is reduced to about one-eighth inch, they are flushed into the
sewer. Some disposals have a screw-type shaft that forces the
waste into the shredders. Waste disposals are sized according to the
horsepower of the motor. Typical sizes available range form 0.33 to
5.0 horse power.
Waste disposal units are frequently installed at points where

garbage and wastes are generated. Locations such as soiled dish
tables, pot and pan-washing areas, and preparation areas are usual
waste-disposal installation points. Optional accessories for the
disposal units include silver trappers and overhead spray units for
washing waste directly into the disposal.
12.4 EQUIPMENT SELECTION
Selecting a particular make and model of any type of

equipment is the final step in determining equipment requirement.
Food service consultants will prepare a “Schedule of equipment” that
will list the specific equipment to be used for the facility. The
following points are considered in deciding the make and model of
equipment to specify.
 Simplicity of operation
 Sanitary design
 Modular sizes to fit standard-sized pans
 Ease of installation
 Cost of operation
 Ease of repair and maintenance
 Durability
 Compatibility with other equipment
The design of the equipment should be simple, functional and

attractive. Maximum utility at a reasonable cost is to be sought for all
types of equipment.
119
Food Service CHECK YOUR PROGRESS
Facilities Planning
1. Food cutters are versatile pieces of equipment than can handle,
………………… and ………………………..
2. Heavy-duty ranges are designed to meet the requirements of

continuous ………………………
3. What is steamer?
4. List out the points in which the selection of equipment is made.
12.5 LET US SUM UP
Food cutters are versatile pieces of equipment than can

handle meats, vegetables and fruits. The food cutter can cut, dice,
shred and almost liquefy foods depending upon the amount of time
the food is left in the cutter. The foods to be size-reduced are placed
in a bowl which rotates and exposes them to high-speed rotating
blades. The basic design of food includes a circular knife blade and
a carriage that passes under the blade.
Mixers are designed to operate at a variety of rotational

speeds, depending on the job. Accessories available include various
whips, beaters and knives attached directly to the drive shaft. The
vertical cutter/mixer is basically a stationary bowl with horizontal
blades that rotate at high speed.
Vegetable peelers are cylindrical tanks that have a revolving

disc at the bottom tank which is equipped with two openings, one
above the disc for loading vegetables and one below it for removing
the peels. A condensate line is provided to remove the water that
accumulates. The amount of heat input is dependent upon the
pressure and amount of steam allowed to enter the jacketed areas.
Steamers are basically sealed compartments where steam is

allowed to come in direct contact with the food for cooking. High-
pressure steamers, sometimes called speed-cookers, are smaller
units that operate with steam at a pressure of 15 psi (103 kpa). The
resultant temperature in the high-pressure steamer is illustrated.
Dish washers are the major item of equipment for ware

washing and are generally classified by the number of tanks. A
single-tank dish-washer is the smallest-capacity machine and is
used for limited facilities. Counter-service operations frequently use
single-tank dishwashers that are either bench-mounted or placed
under counters or work tables. Most single-tank dishwasher has only
a wash-and rinse cycle.
Waste disposal units are frequently installed at points where

garbage and wastes are generated. Locations such as soiled dish
tables, pot and pan-washing areas, and preparation areas are usual
120 waste-disposal installation points.
Selecting a particular make and model of any type of Preparation
equipment is the final step in determining equipment requirement. Equipments
Food service consultants will prepare a “Schedule of equipment” that
will list the specific equipment to be used for the facility.
1. Identify any ten large equipment used in kitchen.
2. Meat the equipment supplier in your city and make a report of

most wanted equipments in the industry and its cost.
12.7 KEY WORDS
Durability Firmness, Integrity
Abrasive A material used for grindings polishing etc.
Steamers Cooks by steaming
Accumulate To gather or pile up
1. Write short notes on the following.
i) Food Cutters
ii) Slicers
iii) Mixers
iv) Vertical Cutter/Mixer
2. Write the uses of ranges in kitchen.
3. What is the role of steamers? Explain in detail.
4. Briefly explain about dishwashing equipment.
5. What are the points to be considered in deciding the make and

model of equipment to specify?
1. meats, vegetables, fruits.
2. high production volumes.
3. Over head broiler, under fired broiler.
121
Facilities Planning
1. Bernard Davis, Andrew Lockwood, Sally Stone (2006), Food and
Beverage Management, Elsevier, A Division of Reed Elsevier
2. David M. Stipanuk, Hospitality Facilities Management and
Design, Educational Institute of American Hotel & Mot.
British Library.
122
LESSON 13
SPACE REQUIREMENTS
CONTENTS
13.1 Introduction
13.2 Space Estimates
13.3 Total Facility Size
13.4 Dining Areas
13.5 Serving Areas
13.6 Space Calculation for Dining Areas
13.7 Let Us Sum Up
13.9 Key Words
13.11 References

following:
 Space Estimates for dining areas and serving areas and

 Space calculation for dining areas.
13.1 INTRODUCTION
Accurate determination of the space requirements for a food

service facility is a very difficult problem, involving considerable
research and computation. The space required for each functional
area of the facility is dependent upon many factors which are not
constant for all types of operations. The factors involved included
the number of meals to be prepared, the functions and task to be
performed the equipment requirements the number of employees
and corresponding workplaces required, storage for materials and
suitable space for traffic and movement. The importance of
accurately evaluating these factors cannot be overemphasis.
Overestimating or underestimating any of them can lead to an
excess or a shortage of space for the facility.
13.2 SPACE ESTIMATES
The general guides and “Rules of thumb” that will be given

are to be used for preliminary space estimates only. They are to be
regarded as strictly tentative and subject to easy change. The
“Rules of thumb” are used to generate a general idea of the overall
size of a facility in order to make preliminary cost estimates for
feasibility studies, or to determine approximate a land requirements
Food Service for the building. In problem with using guides and “Rules of thumb”
Facilities Planning is that the figures given are usually based on exiting operations and
do not reflect newer methods of foodservice operation. Another
difficulty is that these figures are not given for all types of foodservice
operations and consequently they would be of little use for certain
types of projects. Most of the figures available are for general
facilities that have no usual space requirements.
13.3 TOTAL FACILITY SIZE
Depending upon the type of food service to be planned a

it to the numbers of seats to be provided. The estimated square
footage of the total space per seat is given in following table.
Types of operation Ares per Seat (m3)

Table service 24-32 2.23 – 2.97
Counter service 18-24 1.67 – 2.23
Booth Service 20-28 1.86 – 2.60
Cafeteria Service 22-30 2.04 – 2.79
These figures can be related to the number of meals to be

prepared by considering the turn over rate for a particular meal
period. A range of space estimates is given to allow for variations in
the methods of operations with extensive menus and allow more
spacious areas.
Figure for estimating the total facility size of other types of

food service such as tray service, car service or take out service are
not available because of the great variations that exist in these
typed of operations. The only guides available would be to evaluate
similar existing operations and make adjustments as needed.
13.4 DINING AREAS

to be served for a given time period, and the turnover. Turnover
refers to seat usage and is expressed by the number of times a seat
will be occupied over a given time period. Turnover is usually
expressed on a per hour basis, although it can be determined on a
per meal basis.
The turnover is determined by estimating the average time a

seat is occupied for the time period desired. For example, if the
turnover is to be expressed on a per hour basis and the average
estimated time the seat is occupied is 20 minutes, the turnover rate
is 2 per hour. Determining the turnover rate per meal period is useful
126
for determining the total seating capacity based on estimated sales Space Requirements
volume.
Turnover rates are affected by the method of serving and

serving time as well as by the type of customer, menu offerings and
the dining atmosphere. Typical turnover rates for some types of food
service operations are given below:
Type of operation Turnover rate (per Hr)

Commercial cafeterias 1½–2½
Industrial or school cafeterias 2–3
Counter service 2–3½
Combination counter and table service 2–3
Leisurely table service ½–1
Regular table service 1–2½
Turn over rates can be increased to some extent by many

design and operational factors. This is not to suggest that all
facilities should be designed for high turnover rates. However, if
high turnover is one of the basis objectives, then the planner and
subsequent manger can use the following to accomplish this.
 Use menu items that required short processing time or

use predominately preprocessed items.
 Provide Sample production space and equipment to
handle the peak periods.
 Use well – lighted and light colored painted areas for
serving and dining.
 Arrange dining tables in close proximity to each other.
 Develop some what uncomfortable dining seat design.
 Provide sufficient service personnel so guest are served
promptly after they are seated.
 Provide for prompt clearing of the tables when a customer
is finished with a course or the entire meal.
 Make sure guest checks are presented to customers as
soon as they are finished eating.
The square feet of space allowed in the dining arenas is

governed by the amount of comfort desired. Crowding in dining area
is not designable except in some quick-service fast food operations.
Most individuals would like to have sufficient elbow room and table
space to enjoy their meal. First determine the number of meals for
which storage is to be provided. An operation planning on serving
600 meals per day and desiring a two weeks supply will need
storage for 8400 (600 meals per day x 13 days) meals. Next,
estimate the weight per meal of items that will be stored in the dry
storage area. This calls for an evaluation of all menu items. 127
Food Service A general estimate between ¼ and to lb (0.113 and 0.227 kg) per
Facilities Planning meal may be used; it is based on a total weight estimate per average
meal of 1 – 1 ½ lb (0.454.0.530 kg). These figures are for full meals
and adjustments for partial meals have to be made. If an estimate of
½ lb (0.227 kg) per meal is used, then the total weight to provide
storage for is 4200 lb 1905 lb (8400 meals x 0.5 lb per meal) Then
the total weight computed is divided by an average density of 45 lb
per ft (721 kg per m2), which will give the total volume of goods to be
stored. In this example, the total volume in cubic feet is 4200 lb + 45
lb/ft2 = 93.3. This indicates that space of r 93.3 cubic ft (2.64 M3) of
goods, exclusive of aisle space will be needed.
If the goods are to be stored on shelves and the total square

footage of shelve sing can be computed by considering the height to
which the materials can be stored on the shelf. If the materials can
be stored to a height of 1 ft then 93.3 (93.3 ft2 0.457 m) can be used.
Then 62.2 (93.3 / 1.5 ft (5.78 m2) of shelving is required, the length
of shelving is computed by dividing the square feet by the width of
shelving to be used.
This same method of computation can be used for the

refrigerator and freezer storage areas. The weight per meal of items
that will be stored in the refrigerators and freezers will vary between
0.75 and 1 lb ( 0.34 and 0.454 kg). The average density of
refrigerator items can be assumed to be 30 lb ft2 ( 481 kg m2).
Items that will be stored in freezer can be assumed to have a density
of 40 lb/ft2 (641 kg/m3).
The number of days of storage for refrigerator items may vary

from one day to a week or more, depending on the method of
operation used for the facility. Freezers items can be stored for
longer periods of time and are determined by the frequency of
deliveries available. An economic lot size analysis may be made to
determine the optimum size of storage to provide. The analysis
compares ordering, purchasing and reviving costs to the cost of the
storage.
13.5 SERVING AREAS

part of the main cooling area and separate spacer determination are
usually needed. Additional serving stations for table service can be
considered in computation for the dining area
Cafeteria operation is required separate space for the serving

function to allow room for the serving counter, room for guest and
room for servers. Variables affecting the size of the serving area are
the numbers of people to be served and serving time allowed.
Serving line rates vary from 2 to 20 more persons per minute.
The length of cafeteria counter is determined by the variety

and volume of food items to be displayed. Adequate space for
merchandising food items should be allowed.
128
The space required for straight line counters may be roughly Space Requirements
estimated at 10-15 ft2 (0.929 – 1.39 m2) of floor space for each liner
foot (0.305 m) of counter. This provides room for the counters,
customer aisles, and room for servers, and back bar equipment.
Shopping center arrangements generally require 10-20 ft2 (1.67 –
1.86 m2) of floor area for each linear foot (0.0305 m) of counter.
The sizing of serving facilities for cafeterias is directly related

to the capacity of the dining area. Ideal design results when the flow
of people from the serving facility is balanced with the seating
available in the dining room. At equilibrium conditions the flow rate
of people leaving the serving area should equal the flow rate of
people leaving the dining area. In other words, the number of seats
provided in the dining area has a direct relationship to the rate of
people leaving the serving line for a given average eating time. This
relationship can be expressed by the equation:
R = NIT
Where R = rate of people leaving service area, N- number of

seats in dining area, and T= average eating time.
For example, a 200 seat dining room where the average

eating time is 20 minutes should have serving facilities capable of
handling 10 ( R=200/20) persons per minutes. If the eating time is
30 minutes a serving facility must be able to handle 6.7 (R= 200/30)
persons per minutes.
13.6 SPACE CALCULATION FOR DINING AREAS
Calculating the space requirements for dining areas can be

difficult because of the many choice available. For example, the final
space required for a dining room is dependent upon the following
variables; Types of seating to be provided are:
i) Tables and chairs

ii) Booths
iii) Counters
iv) Banquettes
v) Combinations
vi) Table sizes desired
vii) Table shapes desired
viii) Pattern of table arrangements
ix) Aisle space desired
x) Number of service station needed.

the table, the seat and the appropriate share of the service and
access aisles. The modular concept enables designer first to
129
Food Service evaluate the space requirements for different choices that may be
Facilities Planning made before reaching their final decision.
The following example will illustrate this concept for a dining

room that will use tables and chairs only. The first step in the
modular concept is to select the size and shape of table to be
considered. This is done in relation to the customer, the menu, the
type of service and the type of atmosphere desired in the dining
room. Some typical sizes and shapes of dining tables are given in
the following table.
Type Shape Minimum size Spacious

Tables for 1s or 2s Square 24 x 24 30 x 30
Rectangle 24 x 30 30 x 36
Round 30 36
Round 36 48
Round 36 48
Tables for 5s or 6s Rectangle 30 x 60 42 x 72
Round 40 36
Drop leaf tables 30 x 30 in opening to 42 in round
36 x 36 in opening to 52 in round
The second step is to select the aisle spaces to be used.

Aisle space in dining areas may be divided into service aisles and
access aisles service aisles usually range from 2.5 ft ( 0.762 m )
minimum for a limited menu operation to as wide as 4.5 ft ( 1.37 m)
for a dining room featuring cart service of table side food
preparation. Access aisles are provided to allow people to get into
and out of the chairs easily.
The type of customer, size of chairs and the desired

atmosphere (crowed versus spacious) are the critical factors in
selecting the access aisles. Access alsies are generally (l 5. ft.
0.457 m) to 2 ft (0.610m) wide as a minimum. Combined service and
access aisles or aisles for cafeterias where people carry their own
tray are usually sizes for 3 ft (0.913 m) to 4.5 ft. (1.37m)
Having selected the table size and shape and the desired
aisle space, the next step is to consider possible table arrangement
patterns. Squares or round tables may be arranged into a
rectangular or diagonal pattern. The diagonal pattern is more
efficient in the use of space than the rectangular pattern.
130
CHECK YOUR PROGRESS Space Requirements
1. Food cutters are versatile pieces of equipment than can handle,

………………… and ………………………..
2. Heavy-duty ranges are designed to meet the requirements of

continuous ………………………
3. What is a steamer?
4. List out the points in which the selection of equipment is made.
13.7 LET US SUM UP
The general guides and “Rules of thumb” that will be given

are to be used for preliminary space estimates only. They are to be
regarded as strictly tentative and subject to easy change. The
“Rules of thumb” are used to generate a general idea of the overall
size of a facility in order to make preliminary cost estimates for
feasibility studies, or to determine approximate a land requirements
for the building. In problem with using guides and “Rules of thumb”
is that the figures given are usually based on exiting operations and
do not reflect newer methods of foodservice operation.
Depending upon the type of food service to be planned a

it to the numbers of seats to be provided.

to be served for a given time period, and the turnover.

part of the main cooling area and separate spacer determination are
usually needed.

the table, the seat and the appropriate share of the service and
access aisles.
1. Calculate the space requirements and make a report as

assignment.
2. Do the chart work of showing various sizes and shapes of dining

tables.
131
Food Service 13.9 KEY WORDS
Facilities Planning
Computation the act or process of computing
Feasibility capable of being accomplished or brought about.
Footage length, extent or amount based on measurement in

feet .
Cafeteria a restaurant in which the customers are served at a

counter and carry their meals on trays to tables.
Equilibrium mental or emotional balance
1. Draw a simple sketch of a kitchen facility that you are - identify its
good and bad points with respect to the concepts of flow.
2. Determine the advantages and disadvantage of each of the

following layout configurations:
(a) single straight-line arrangement.

(b) L-shaped arrangement,
(c) U-shaped arrangements
(d) Parallel back-to-back arrangement and
(e) Parallel face-to-face arrangement.
1. The “Rules of thumb” are used to generate a general idea of the

overall size of a facility in order to make preliminary cost
estimates for feasibility studies,
2. The turnover is determined by estimating the average time a seat
is occupied for the time period desired.
3. The type of customer, menu offerings
4. Variety and volume of food items
13.11 REFERENCES

2. David M. Stipanuk, Hospitality Facilities Management and
Design, Educational Institute of American Hotel & Mot.
132
LESSON 14
SPACE ARRANGEMENT
CONTENTS
14.1 Space Arrangement
14.2 Flow
14.3 Other Criteria for Layout
14.4 Layout Configurations
14.5 Relationship Charts for Layouts
14.6 Layout Guides
14.7 Layout of Storage Areas
14.8 Layout of Main Cooking Area
14.9 Layout of Preparation Area
14.10 Layout of Serving Area
14.10.1 Table Service
14.10.2 Counter Service
14.10.3 Cafeteria Service
14.11 Layout of Dishwashing Area
14.12 Sample Foodservice Layouts
14.13 General Restaurants
14.13.1 Howard Johnson
14.13.2 Red Fox
14.13.3 Spanish Oaks
14.14 Let Us Sum Up
14.16 Key Words
14.18 References

following:
 Space Arrangement
 Layout Considerations and
 Layout Guides.
14.1 SPACE ARRANGEMENT
After developing the workplaces determining the specific

equipment to use and finalizing the space requirements the food
facility designer is ready to accomplish the layout phase of the
planning process. Actually, this has probably been developing in the
designers mind as the various other planning steps were being
accomplished. Some of the equipment layouts for certain functions
may already have been complete during the design of the
Food Service workplaces. Now the designer will formalize them, first as rough
Facilities Planning sketches and ultimately in the form of blueprints.
The layout process may be described as two separate stage

that occur at the same time. One stage deals with arrangement of
individual pieces of equipment, work tables and sinks into a unit
which comprise a functional area or a functional department. The
term department is sometimes associated with separate room, but
this is not necessarily the case with food service operations. In
essence, the designer is developing an area where related functions
will be performed and may include a many as few functions as
deemed appropriate for the project. To illustrate, one particular are
may be developed for the functions of desert preparation, salad
preparation and sandwich preparation whereas another project may
require three separate areas for these functions.
The second stage of the layout process involves arranging

the functional areas or departments in to the total facility. For
example, the reviving storage preparation production and ware
washing areas and the non production areas such as rest rooms,
lounges and offices are brought together to form the basic floor plan
for the facility.
There may be some question as to where these two stages of

layout are done at the same time. Even though the planner may be
working on one stage or the other at any given moment, layout
decision must be considered in terms of both stages. In essence,
the layout of the total facility must be considered when laying out the
component areas, and in turn, the layout of the component must be
considered when laying out the total facility.
14.2 FLOW
The planning of individual workplaces is followed by the

logical grouping of several workplaces to develop work centre
departments. The combining of work places including trines, sinks
and equipment is guided by different concepts of flow. The criteria
involved may include employee flow, material or product flow,
customer flow or in some cases combinations of these. For
example, the layout of a short order cooking is to be staged by one
employee is best done by evaluating the employee movements.
This can be done by determining the frequency of movement
anticipated between pairs of equipment and then placing the pairs of
equipment that involves the greatest frequency of movement next to
one another in the equipment arrangement. This analysis leads to
increased productivity.
In some instances it may be possible to place equipment in

the same vertical plane to completely eliminate employee
movements. The use of salamanders above a range or a microwave
oven above a work table is example of this concept. Consideration of
combined or multipurpose equipment where appropriate is
warranted.
134
The planning of a large dish washing area to include a Space Arrangement
continuous dishwashing machine and where employees are primarily
working in fixed areas such as the scrapping table, loading the
dishwasher, or unloading the dishwasher may be guided by
evaluating material flow. In this case the flow of china glassware
and silver is analyzed to lead an arrangement that minimize the
material flow.
In some situation the flow of two or more variables may be

evaluated to determine the best layout. A salad preparation area
may require evaluation of both the flow of foods and the movements
of employees in order to arrive at the best layout in most cases
arrangements that minimize the flow of materials are also those that
minimize the movements of employees. This is likely when the
materials are moved primarily by workers, but may not be the case if
mechanical conveyors are used. If there is any doubt, both flows
should be evaluated.
Regardless of the type of flow selected as the criterion for

layout, the following principles can be applied:
i) Flow should be along straight line paths as much as
possible.
ii) The amount of cross flow or cross traffic should be
minimized.
iii) Backtracking should be minimized.
iv) Bypassing should be minimized.
These principles of flow, whether applied to the movement of

materials or of people, can be used for all types of layout problems.
The concept of keeping flow in a straight line is the most important
because it results in movements over the shortest distance. To
utilize this concept, the designer will visualize or chart the flow
involved with several different arrangements and select the one that
gives the best straight line pattern. Flow analyses for layout
problems involving only a few pieces of equipment or areas will
require more extensive flow analysis. Some planners find flow
diagrams or string charts a helpful tool in evaluating complex flow
patterns.
With the great variety of materials and activities found in

foodservice operations the concept of minimizing cross traffic is
important because it results in layouts that are free of bottlenecks
and congestion. This concept is especially pertinent to fast food
operations which have peak periods of flow; cross traffic is
minimized by the proper location of aisles, passage ways, and doors.
Some cross traffic can be tolerated where it results in shorter flow
patterns. However, if the cross traffic creates a hazardous situation
it should be eliminated even at the cost of increased distance of
movement. Cross traffic between employees and guests is
undesirable and should be eliminated.
Backtracking occurs when a material or person moves from 135

one piece of equipment or an area back to the point where the
Food Service movement originated. The flow is back along the same path that
Facilities Planning was just traversed. Of course many of the tasks required in
foodservice operations involve a sequence of movements that make
it practically impossible to eliminate all backtracking. Many of the
cooking and production tasks are of this nature. In those situations
minimizing the amount of backtracking is all that can be done. This
involves evaluating several different equipment or space
arrangements to find the best one.
Bypassing is the result of a material or person passing one or

more pieces of equipment to get to the next piece of equipment
required in the sequence of movements. Several different
arrangements of the equipment or areas may have to be evaluated
to determine which one results in the least amount of bypassing. As
with cross traffic, it is impossible to eliminate all bypassing except in
the very simplest of layout problems.
The ultimate goal of layout is to develop arrangements of

equipment and space for the food facility t that have primarily
straight-line flow paths with a minimum of cross traffic, backtracking
and bypassing.
14.3 OTHER CRITERIA FOR LAYOUT
Although flow has been identified as the most important

criterion of layout, other modifying considerations which may affect
some layout decisions should be evaluated before the arrangement
is finalized.
These include the following items:
(1) Efficient use of utilities: All equipment requiring

steam, for example may be placed together to
economize on installation and operating costs.
(2) Efficient use of equipment: Some individual pieces of

equipment that will be used in two or more functional
areas can be placed in central locations so that are
easily accessible.
(3) Efficient use of skill labor: These arrangements of

equipment that will minimize the movements of skilled
personnel. This may increase the movements of other
employees or increase the movement of materials. The
decision may be based on an economic analysis of
different arrangements.
(4) Safety: Some layouts based on the concepts of flow

alone may result in an arrangement of equipment that is
hazardous. Placing a deep fat fryer next to a sink
creates a dangerous situation and safety should over
ride flow in this case. Other hazardous arrangements
may result when high temperature equipment is placed
136 adjacent to a traffic aisle or near entrances and exits. If
another location is not feasible sufficient guarding and Space Arrangement
shielding of the equipment is an alternative solution.
(5) Efficient use of space: Building configurations and

shapes may require rearrangement of some layouts it
make full use of available space.
(6) Environmental factors of noise and odour: Some

pieces of equipment or areas may be isolated from flow
paths if they are objection able and cannot be modified
to render them environmentally acceptable. Garbage-
can washers or incinerators illustrate this situation.
These modifying criteria may result in arrangements that are

more expensive than those based on flow alone. They have to be
used, however, to achieve many of the objectives of planning that
were identified.
14.4 LAYOUT CONFIGURATIONS
The arrangement of equipment and workplaces for functional

areas is usually in the form of a straight line or in combinations and
modifications of straight line configurations. The basic patterns that
may be used include:
(1) Single straight line arrangement: This is the simplest

of designs, but it is limited in the number of pieces of
equipment or workplaces that can be arranged. The
straight line arrangement may be placed along a wall or
take the form of an island.
(2) L-shaped arrangement: This is a modification of the

straight line arrangement to accommodate more
equipment and workplaces. It is sometimes used where
liner space is limited. The L-shaped configuration is very
suitable for separating two major groups of equipment.
One group of equipment would be placed on one leg of
the L, the other group forming the second leg.
(3) U-Shaped arrangements: The U-shaped configuration is

ideal for small areas where only one or two employees
are working. One disadvantage of this configuration is
that straight line flow through the area is not possible.
(4) Parallel, back-to-back arrangement: This configuration

is an arrangement of two parallel lines where the backs of
the equipment and / or workplace on each line are
adjacent to each other. This arrangement centralize the
utility lines required for equipment. Some times a short
wall is placed between the rows of equipment, in which
case provision for cleaning and maintenance has to be
allowed. Parallel, back-to-back arrangement of cooking
equipment that must be vented is ideal because a single
canopy wood can be used. The separation of major 137
Food Service groups of equipment is easily accomplished with this
Facilities Planning configuration.
(5) Parallel, face-to-face arrangement: This arrangement

utilized two straight lines of equipment and workplace
where the fronts face each other and are separated by an
aisle space. This is a very common configuration that
can be used in many areas of the facility. A variation of
this configuration is obtained by arranging a straight line
of work tables between the two rows of equipment. The
parallel face to face arrangement requires two separate
utility lines for equipment as compared to the single utility
line used in the parallel, back-to-back arrangement.
Modification of any of these configurations can be used to

handle special cases and problems. T- shaped open-square or other
configurations should be used if they result in the best solution to the
layout problem.
Curved or circular configuration are sometimes used, but

should be planned very carefully to fit straight-line configuration that
may be used in the facility. Circular serving islands for shopping
center, cafeterias and curved cafeteria counters are examples of
these configurations.
The final arrangement for most facilities is usually composed

of a combination of configurations of equipment and workplaces.
Only the smallest of operations would use a single configuration for
the layout of the facility.
14.5 RELATIONSHIP CHARTS FOR LAYOUTS
The consideration of flow patterns in conjunction with other

criteria that may affect a layout may be evaluated by a relationship
chart showing the desired degree of closeness between pieces of
equipment and areas. A relationship chart is made by listing all the
items or areas to be arranged for a given facility. Closeness ratings
are based on any number of factors including flow, efficient use of
equipment, efficient use of utilities, use of labour safety and even the
personal preference of the planner. In the majority of the cases flow
will still be the primary basis for the closeness ratings.
Closeness ratings may be expressed by a numerical scales

as shown next. The rating are used to express the desired closeness
of the final arrangement of the areas
The usefulness of the relationship chart is dependent upon

the planner’s awareness of the need to compromise. Indication that
all areas of a facility have to be close to all other areas negates the
purpose of the relationship chart.
It is important to note that other types of foodservice facilities

may have a greater or less number of areas listed on the left side of
138 the chart. In some cases areas may be combined as illustrated by
this facility that will utilize one or for both salad and vegetable Space Arrangement
preparation. In other instance, additional areas may be designated
as occurs when a separate take-out area is to be planned for in
addition to the regular service area. Thus each different project to
be planned requires a different relationship chart depending on the
defined areas to be considered.
If the exact or approximate size and shape of each area

including aisle spaces are known as preliminary schematic, it can be
developed front the relationship chart ratings. The relationship chart
does not necessarily lead to just one layout of areas but may result
in several alternative layouts. The areas and sizes of each
department used to develop the layout are given in the following
listing.
Department Et2
Receiving 50
Dry storage 200
Refrigerated storage 34
Freezer 55
Meat preparation 40
Vegetable and salad prep 227
Baking 93
Cooking 160
Serving and pick up 160
Dining 1400
Dishwashing 100
Pot washing 56
Office 50
Employee facilities 160
Utility room and misc 164
The schematic layout shows tat all areas with rating of 6

between them have been placed close to one another. An
examination of the other rating in the relationship chart and the
placement of the areas in the layout showed that the desired degree
of closeness has been achieved for most departments.
The relationship chart may be used in a similar manner to

guide the layout of individual pieces of equipment in any of the
departments.
14.6 LAYOUT GUIDES
The basic concepts of flow long with the modifying

consideration gives the planner the basic guides for laying out the
facility. It is not possible to discuss the layout of all areas for all
139
Food Service types of food facilities but general guides to the arrangement of
Facilities Planning some areas common to most facilities will be given.
Overall design of the facility is usually based on the flow of

major food items. Since most food items are received and then
stored before preparation, the dry, refrigerated and freezer storage
areas should be adjacent to receiving areas and also be readily
accessible to the various preparation areas. The main cooking area
is so located as to receive the flow from the preparation areas and
have an outlet directly to serving area. The salad and sandwich
preparation areas may be so placed that their flow of foods is directly
into the serving area placement of the dining area adjacent to the
serving area is obvious.
The flow of nonfood items is next evaluated to locate other

areas. The flow of dinnerware in a repetitive route from serving areas
to dining areas and then back to serving areas require the
dishwashing area to be adjacent to both. Similarly, the flow of
utensils dictates placing the pot and pan washing section near the
main cooking baking and serving areas.
Areas involving the flow of people are then blended into the
layout in a manner that does not interfere with the flow of materials.
Thus the overall layout of the facility by functional areas begging to
take shape.
14.7 LAYOUT OF STORAGE AREAS
The layout of storage areas is based on convenience and

accessibility. Arrangements that allow heavy and bulky materials to
be moved as little and as easily as possible are preferred. Central
storage facilities with several satellite locations are good
arrangements for many types of facilities. The storage space in the
preparation, processing and other functional areas should be
planned so they do not interfere with efficient work methods. The
use of combination walk and reach in storage units may increase the
convenience of these areas.
It is best to plan walk in storage areas in a manner which

keeps the products at least 5 in (203mm) above the floor to facilitate
cleaning. An alternative would be to use mobile bins and containers
that can be easily moved when area is cleaned.
Storage areas for non-food supplies may be located in the

various functional areas as required. Storage space for china, glass
and silverware may be providing in serving or dining areas. Linen
and paper goods used for service are also stored in or near these
areas.
14.8 LAYOUT OF MAIN COOKING AREA
Laying out the main cooking area is the key to fast and
efficient production of foods. The flow patterns affecting this area
140
include inflow of foods from storage and preparation areas and
utensils from the pot and pan washing area. Outflow of foods to the Space Arrangement
serving salad preparation and sandwich preparation areas are
common. The cooking equipments should be arranged so that the
most frequently used pieces are close to the pick-up location.
Other factors related to the design of the main cooking area

include the following:
(1) All heat and moisture producing equipment, such as

fryers, boilers, griddles, ranges and steamers should
be placed under ventilating hooks or be equipped with
individuals –ting systems.
(2) Steam cooking equipment requires special installation

including depressed floors or the use of curbs.
(3) Some types of equipment require air for ventilation or

cooling of enclosed spaces vents and grill openings
should not be blocked by other pieces of equipment.
(4) Provision has to be made to permit venting of fuel-

burning equipment directly to the outside.
(5) Location of the main building ventilation or air-

conditioning inlets is important to effect adequate
cooling of the air without cooling the cooking
equipment or interfering with the equipment venting
system.
(6) If remote banquet rooms are to be served, methods of

transporting hot foods and appropriate space for
loading have to be considered.
(7) The use of partially or fully preprocessed foods will

increase the need for refrigerated space in the
cooking areas.
Flexibility and efficient use of employees and equipment can

be obtained in some operations where similar equipment is involved
in baking and cooking. In this case the baking and cooking areas
are placed in close proximity so that kettles, ovens and mixers can
serve both areas. This may even result in reduced exhaust
requirements.
Placing the baking and cooking areas adjacent to each other

also guides the placement of the pot washing area since these two
areas generate the bulk of the soiled pots.
14.9 LAYOUT OF PREPARATION AREA
The layout of preparation areas is fairly easy because most of

the functions performed in them follow a logical sequence.
Vegetable preparation, for example basically involves trimming
washing and size reduction in that order. A straight-line arrangement 141
Food Service of a work table for trimming, a sink for washing and draining and
Facilities Planning equipment for size reduction becomes the layout for the area. Since
the inflow of vegetables is from storage areas, the trimming table are
placed close to them consequently the size reduction equipment is
placed near the main cooking and salad preparation areas.
Provision for temporary storage of materials and removal of waste
will complete the layout of the vegetable preparation area for a small
facility. Larger operations will require more space and equipment
and take longer to layout.
Salad preparation areas are planned in a similar manner.

The foods should flow in a continuous path from the start of the
preparation tasks, through the various workplaces and equipment
which is arranged in the order of the steps required and on to the
serving area operations that prepare a large number of the same or
very similar salads that may be designed by the concepts of mass
assembly.
14.10 LAYOUT OF SERVING AREA
The layout of serving areas is based on the method and

speed of service desired. Serving equipment should be arranged in
the order of use, and should be located so they are easily accessible
to serving personnel.
14.10.1 Table Service
Hot food pick up areas are located adjacent to the main

cooking pantry. Provisions for maintaining the temperature of hot
foods at pick-up areas should be considered. Additional serving
stations or pantries for salads, desserts, rolls and beverages are
located nearer the dining area to avoid congestion. Linen, flatware,
water and butter used for setups are best placed in inconspicuous
area of the dining room. These stations may also include facilities
for depositing soiled linen and tableware.
14.10.2 Counter Service
Most of the cooking and serving facilities in typical counter-

service operations occur at the back bar opposite the dining counter.
A common layout is to have a straight line back bar with straight –
line or a series of U-shaped dining counters. Some operations
offering a more extensive menu may require additional preparation
and cooking facilities that can be located in a separate area. An
efficient layout in this case is to have the pick-up counter as a part of
the back bar. This is also a good arrangement for operations having
both counter and table-service sections. This pick-up area should be
located for easy access to the table servers.
14.10.3 Cafeteria Service
Cafeteria counters are placed as close to the production area

as possible with due regard to the free flow of customers or users.
142
The layout of cafeteria counters is based on the shape of the serving
area and the anticipated traffic patterns. Counters may be arranged Space Arrangement
in a straight line, L-shaped, U-shaped, hollow square, or
combinations of these configurations as dictated by the length of
counter required.
The design of the counter should allow to display foods that

are usually selected in combination to be placed together on the
counter. Merchandising concepts call for desserts and salads to be
located at the beginning of the line hot foods should be at the end of
the line to minimize cooling. Special care is needed in providing for
cashiering.
The entire design of the cafeteria service system is based on

volume flow and anything that will speed service should be
incorporated into the layout. Silver, napkins, water and condiments
may be located in stations away from the main counter area. Islands
placed between the serving and dining areas are frequently used for
this purpose. Self dispensing equipment for beverages will also help
speed the flow of people.
Cook-to-order items cause delays and are best located in a

separate area where patrons can pull out of the main stream of flow
to wait for their orders. This can be easily accomplished with the
open square arrangement of counters.
14.11 LAYOUT OF DISHWASHING AREA
The layout of dishwashing areas should follow the sequence

of operations performed in washing. The arrangement has to
provide for sorting scraping or pre-flushing and stacking prior to
loading the dishwashing machine. If glasses and silverware are to
be washed separately provisions for these operations have to be
planned.
Pre-flushing of soiled dishes may be accomplished in one of

two ways. One method is to use a continuous flow of water over the
dishes as they are being scraped. The final layout reflects the
amount of time care taken in completing the other steps of the
planning process.
14.12 SAMPLE FOODSERVICE LAYOUTS
The planning of food service facilities involves developing

layouts for a wide variety of operations. Each layout should reflect
the type of menu entrees to be prepared, the production processes
to be used, the equipment choices and the method of operation
desired by management. This chapter presents illustrations of
layouts for several different types of foodservice operations. The
plans shown are examples and are not intended to represent the
only layout suitable for each type of operation.
Grateful acknowledgment is made to Kitchen Planning

Magazine for permission to reproduce the plans and descriptions of
143
the foodservice facilities shown.
Food Service 14.13 GENERAL RESTAURANTS
Facilities Planning
14.13.1 Howard Johnson
Howard Johnson’s roadside restaurants kitchen was planned

to prepare the chain’s own frozen products and was developed on
the concept of minimum on-the-site food preparation. This design
concept has reduced the total kitchen areas by about 50% from their
earlier designs. This was primarily accomplished by reducing the
space required for food storage, dish-washing and pot washing. The
meat and vegetable preparation areas were eliminated to save
space. A reduction in the baking area over older designs was also
included in the new design.
The kitchen layout uses modern reconstituting equipment,

including convection ovens and microwave ovens for heating frozen
foods. All cooking equipment is located so that a cook can reach it
by pivoting or walking a short distance. The range, char boiler,
fryers and griddle are also conveniently located adjacent to the pick-
up area. When orders are prepared, they are placed on a pass shelf
directly in front of the cook’s station.
The Kitchen is supported by a pantry located directly off the

dining room and adjacent to the kitchen. A pass-through shelf is
placed between the kitchen and the pantry thus providing more pick-
up area for the waitresses. The pantry contains all the necessary
equipment for coffee, rolls, pastry, cocktails eliminating the need for
waitresses to enter the kitchen directly. Milk, ice cream and soda
fountain items are also easily accessible to the waitresses.
This design reflects the minimum space and equipment

required for a foodservice facility using primarily convenience foods.
14.13.2 Red Fox
The Kitchen facilities for the Machos Red Fox restaurant in

West Bloomfield is geared to preparing high – quality meals. The
restaurant was designed to appeal to suburbanites who are in a high
income bracket and would generate a moderately high check
average. The menu offers popular items which can be rapidly
prepared and served.
Some of the basic planning objectives for the food service

facility were.
 Design for a minimum number of employees

 Kitchen and support facilities located as close to the
point of service as possible.
 Minimum distance travelled by waitresses in serving
guests.
The cook-to-order menu items are prepared in an area

adjacent to the dining room and include a salamander, broiler, fryer,
144
griddle, tange, oven, and roaster. Adequate worktable space and a
slicer are also in this area. Orders are prepared and then placed Space Arrangement
directly on the pick-up counter for the waitress. Additional items can
be prepared at the range, broiler or oven located at the left side of
the kitchen.
Pantry areas are duplicated on either side of the cook to

order area so that waitresses can minimize the distance travelled for
coffee, water and ice.
14.13.3 Spanish Oaks
The Menu for Spanish Oaks includes 20 entrees with a

complimentary house relish tray. Entrees include a choice of baked
or parsley potatoes and a vegetable of the day. A Wide selection of
soups, salads and desserts is also available.
The kitchen was planned for the basic roasting and sautéing
equipments of the predominantly Spanish menu. The chef area is
centrally located with everything with in easy reach. As most entrée
items are cooked to order, there is a minimum of steam – table and
other food-holding equipment.
Future expansion of kitchen space is provided in anticipation

of increased sales volume. Space has been provided for an
additional oven, another freezer and another refrigerator. These
items can be quickly moved into place and installed without major
alteration to the structure. The dishwashing and pot washing areas
were planned for current needs and any envisioned expansion, since
these facilities are more difficult to expand after they have been
installed.
The dining area seats 85 customers, with room for 40 more in

the cocktail lounge. The facility was designed so that a dining room
wall could be easily removed to incorporate additional dining space
in an adjacent building.
CHECK YOUR PROGRESS
1. What do you understand by the term Single straight line

arrangement?
2. The term department is sometimes associated with ……………,

but this is not necessarily the case with food service operations.
3. The planning of individual workplaces is followed by the

……………. to develop work centre departments.
14.14 LET US SUM UP
The layout process may be described as two separate stage

that occur at the same time. One stage deals with arrangement of
individual pieces of equipment, work tables and sinks into a unit
which comprise a functional area or a functional department. The 145
Food Service term department is sometimes associated with separate room, but
Facilities Planning this is not necessarily the case with food service operations. In
essence, the designer is developing an area where related functions
will be performed and may include a many as few functions as
deemed appropriate for the project. To illustrate, one particular are
may be developed for the functions of desert preparation, salad
preparation and sandwich preparation whereas another project may
require three separate areas for these functions.
The second stage of the layout process involves arranging

the functional areas or departments in to the total facility. For
example, the reviving storage preparation production and ware
washing areas and the non production areas such as rest rooms,
lounges and offices are brought together to form the basic floor plan
for the facility.
The planning of individual workplaces is followed by the

logical grouping of several workplaces to develop work centre
departments. The combining of work places including trines, sinks
and equipment is guided by different concepts of flow.
The planning of a large dish washing area to include a

continuous dishwashing machine and where employees are primarily
working in fixed areas such as the scrapping table, loading the
dishwasher, or unloading the dishwasher may be guided by
evaluating material flow. In this case the flow of china glassware
and silver is analyzed to lead to an arrangement that minimize the
material flow.
1. Do the chart work for layout of serving area and preparation area
for food restaurant.
14.16 KEY WORDS
Blueprint it is a type of paper based reproduction usually of

a technical drawing documenting architecture or
an engineering design.
Bottlenecks it is a phenomenon where the performance or

capacity of an entire system is limited by a single
component.
Incinerators a furnace or apparatus for burnishing trash,

garbage etc to ashes.
Exhaust to pass out or escape, as spent steam from the

cylinder of an engine.
Congestion overcrowding clogging
Merchandising goods bought and sold in business, commercial

works.
146
Space Arrangement
Cashiering a person who handles cash transactions with
customers
1. Discuss the differences and the reasons for these differences

between the lay-out for a fast food unit and a luxury restaurant
that prepares most of its menu items from scratch. Include
storage cooking preparation service and dishwashing in the
discussion.
2. Give an example of how each of the following concepts can be

incorporated into the floor plan for a foodservice facility
(a) Efficient use of utilities,

(b) Efficient use of equipment
(c) Efficient use of skilled labor.
(d) Safety,
(e) Efficient use of space and
(f) Environmental factors of noise and odour.
3. Evaluate the layout
(1) Material flow

a. Foods
b. Dinnerware
c. Utensils
(2) Employee flow
a. Production
b. Service
(3) Customer flow.
4. Develop a relationship chart for a fast food operation of your

choice. Identify the functional areas and give the closeness
ratings.
5. Evaluate the layout using the relationship concept. How would

the layout rate in terms of the closeness analysis?
1. Single straight line arrangement. This is the simplest of designs,

but it is limited in the number of pieces of equipment or
workplaces that can be arranged. The straight line arrangement
may be placed along a wall or take the form of an island.
2. Separate room
3. logical grouping of several workplaces
147
Facilities Planning
2. Avery A.C (1965), Simplified Food Service Layout, Cornell Hotel
Restaurant Admin.
3. Avery A.C (1950), A Modern Guide to Food Service Equipment,
CBI Publishing Co., Boston, Manchester
4. Freshwater J.F (1971), Labor Utilization and Operating Practices
in Table Service Restaurants Agric. Res. Service. USDA.
Washington D.C.
148

Food Service

Uploaded by

Document Informationclick to expand document informationit is very goid topic for food service

Document Informationclick to expand document information

Copyright:

Available Formats

Food Service

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Food Service

Uploaded by

Copyright:

Available Formats

FOOD SERVICE FACILITIES PLANNING

Third Year, Paper X

School of Distance Education

Compiled and Printed

Lesson 2 Equipment Requirements 13 - 28

Lesson 4 Planning Team 33 - 40

Lesson 7 Preparation of Prospectus 57 - 68

Lesson 10 Planning the Atmosphere 89 - 100

Year Paper Subject and Paper Theory

Bharathiar University, Coimbatore.

Course : B.Sc. (Catering Science & Hotel Management)

1. i) What is the function of the designs?

2. i) Write in details about Equipment requirements.

3. i) Write short notes on land developers and realtors.

4. i) What is the type of food service facility?

5. i) What are the regulatory considerations?

6. i) What are the points to be considered on Site Analysis?

7. i) Write the uses of ranges in kitchen.

1.0 AIMS AND OBJECTIVES

At the end of this lesson, students should be able to

The food service industry has experienced tremendous

Foodservice facilities vary from the simplest limited menu

Each foodservice facility may be planned to meet different

1.2 DESIGN AND LAYOUT

The term “design and layout” are sometimes confused and

Layout is a more limited function of the planning process that

The entire design of a foodservice facility includes many

The order of the functions is not intended to signify the

The design function identified emphasizes the importance of

The design and layout of the workplaces, department’s

In reality, it would be impossible to plan a well-designed

1.3 PLANNING PROCESS

The planning of a complete foodservice facility requires the

The planning process usually begins when there is a ideal

The various steps of the planning process will be outlined in

The planning of food service facilities is characterized by

A well planned facility developed by utilizing the basic

The characteristics of a well planned food service facility are:-

 Minimum investment in buildings, furnishings and

Planning deals with development of spaces, equipment and

1.6 FACILITATING PRODUCTION

The objectives for all types of planning are common in

1.7 MATERIALS HANDLING

Another objective is to design so that it will minimize the

Some basic objectives that guide the design of a materials

 Minimize the cost of handling materials.

1.8 SPACE UTILIZATION

The increasing in the cost of building materials, equipment,

1.9 MAINTENANCE AND CLEANING

The provision for maintenance and cleaning case in the food

1.10 COST CONTROL

A food service facility designed with cost control as a basic

1.12 LABOUR UTILIZATION

A very important objective of planning is to develop a design

Areas related to Labour aspect are consideration of

Another objective that guides the planning of facilities is the

1.15 DEVELOPING THE CONCEPT

This phase of the planning process involves identifying or